diff options
| -rw-r--r-- | drivers/mtd/devices/pmc551.c | 1163 |
1 files changed, 596 insertions, 567 deletions
diff --git a/drivers/mtd/devices/pmc551.c b/drivers/mtd/devices/pmc551.c index a03a8a79..4d40236 100644 --- a/drivers/mtd/devices/pmc551.c +++ b/drivers/mtd/devices/pmc551.c @@ -4,82 +4,82 @@ * PMC551 PCI Mezzanine Ram Device * * Author: - * Mark Ferrell <mferrell@mvista.com> - * Copyright 1999,2000 Nortel Networks + * Mark Ferrell <mferrell@mvista.com> + * Copyright 1999,2000 Nortel Networks * * License: - * As part of this driver was derived from the slram.c driver it - * falls under the same license, which is GNU General Public - * License v2 + * As part of this driver was derived from the slram.c driver it + * falls under the same license, which is GNU General Public + * License v2 * * Description: - * This driver is intended to support the PMC551 PCI Ram device - * from Ramix Inc. The PMC551 is a PMC Mezzanine module for - * cPCI embedded systems. The device contains a single SROM - * that initially programs the V370PDC chipset onboard the - * device, and various banks of DRAM/SDRAM onboard. This driver - * implements this PCI Ram device as an MTD (Memory Technology - * Device) so that it can be used to hold a file system, or for - * added swap space in embedded systems. Since the memory on - * this board isn't as fast as main memory we do not try to hook - * it into main memory as that would simply reduce performance - * on the system. Using it as a block device allows us to use - * it as high speed swap or for a high speed disk device of some - * sort. Which becomes very useful on diskless systems in the - * embedded market I might add. + * This driver is intended to support the PMC551 PCI Ram device + * from Ramix Inc. The PMC551 is a PMC Mezzanine module for + * cPCI embedded systems. The device contains a single SROM + * that initially programs the V370PDC chipset onboard the + * device, and various banks of DRAM/SDRAM onboard. This driver + * implements this PCI Ram device as an MTD (Memory Technology + * Device) so that it can be used to hold a file system, or for + * added swap space in embedded systems. Since the memory on + * this board isn't as fast as main memory we do not try to hook + * it into main memory as that would simply reduce performance + * on the system. Using it as a block device allows us to use + * it as high speed swap or for a high speed disk device of some + * sort. Which becomes very useful on diskless systems in the + * embedded market I might add. * * Notes: - * Due to what I assume is more buggy SROM, the 64M PMC551 I - * have available claims that all 4 of it's DRAM banks have 64M - * of ram configured (making a grand total of 256M onboard). - * This is slightly annoying since the BAR0 size reflects the - * aperture size, not the dram size, and the V370PDC supplies no - * other method for memory size discovery. This problem is - * mostly only relevant when compiled as a module, as the - * unloading of the module with an aperture size smaller then - * the ram will cause the driver to detect the onboard memory - * size to be equal to the aperture size when the module is - * reloaded. Soooo, to help, the module supports an msize - * option to allow the specification of the onboard memory, and - * an asize option, to allow the specification of the aperture - * size. The aperture must be equal to or less then the memory - * size, the driver will correct this if you screw it up. This - * problem is not relevant for compiled in drivers as compiled - * in drivers only init once. + * Due to what I assume is more buggy SROM, the 64M PMC551 I + * have available claims that all 4 of it's DRAM banks have 64M + * of ram configured (making a grand total of 256M onboard). + * This is slightly annoying since the BAR0 size reflects the + * aperture size, not the dram size, and the V370PDC supplies no + * other method for memory size discovery. This problem is + * mostly only relevant when compiled as a module, as the + * unloading of the module with an aperture size smaller then + * the ram will cause the driver to detect the onboard memory + * size to be equal to the aperture size when the module is + * reloaded. Soooo, to help, the module supports an msize + * option to allow the specification of the onboard memory, and + * an asize option, to allow the specification of the aperture + * size. The aperture must be equal to or less then the memory + * size, the driver will correct this if you screw it up. This + * problem is not relevant for compiled in drivers as compiled + * in drivers only init once. * * Credits: - * Saeed Karamooz <saeed@ramix.com> of Ramix INC. for the - * initial example code of how to initialize this device and for - * help with questions I had concerning operation of the device. + * Saeed Karamooz <saeed@ramix.com> of Ramix INC. for the + * initial example code of how to initialize this device and for + * help with questions I had concerning operation of the device. * - * Most of the MTD code for this driver was originally written - * for the slram.o module in the MTD drivers package which - * allows the mapping of system memory into an MTD device. - * Since the PMC551 memory module is accessed in the same - * fashion as system memory, the slram.c code became a very nice - * fit to the needs of this driver. All we added was PCI - * detection/initialization to the driver and automatically figure - * out the size via the PCI detection.o, later changes by Corey - * Minyard set up the card to utilize a 1M sliding apature. + * Most of the MTD code for this driver was originally written + * for the slram.o module in the MTD drivers package which + * allows the mapping of system memory into an MTD device. + * Since the PMC551 memory module is accessed in the same + * fashion as system memory, the slram.c code became a very nice + * fit to the needs of this driver. All we added was PCI + * detection/initialization to the driver and automatically figure + * out the size via the PCI detection.o, later changes by Corey + * Minyard set up the card to utilize a 1M sliding apature. * - * Corey Minyard <minyard@nortelnetworks.com> - * * Modified driver to utilize a sliding aperture instead of - * mapping all memory into kernel space which turned out to - * be very wasteful. - * * Located a bug in the SROM's initialization sequence that - * made the memory unusable, added a fix to code to touch up - * the DRAM some. + * Corey Minyard <minyard@nortelnetworks.com> + * * Modified driver to utilize a sliding aperture instead of + * mapping all memory into kernel space which turned out to + * be very wasteful. + * * Located a bug in the SROM's initialization sequence that + * made the memory unusable, added a fix to code to touch up + * the DRAM some. * * Bugs/FIXME's: - * * MUST fix the init function to not spin on a register - * waiting for it to set .. this does not safely handle busted - * devices that never reset the register correctly which will - * cause the system to hang w/ a reboot being the only chance at - * recover. [sort of fixed, could be better] - * * Add I2C handling of the SROM so we can read the SROM's information - * about the aperture size. This should always accurately reflect the - * onboard memory size. - * * Comb the init routine. It's still a bit cludgy on a few things. + * * MUST fix the init function to not spin on a register + * waiting for it to set .. this does not safely handle busted + * devices that never reset the register correctly which will + * cause the system to hang w/ a reboot being the only chance at + * recover. [sort of fixed, could be better] + * * Add I2C handling of the SROM so we can read the SROM's information + * about the aperture size. This should always accurately reflect the + * onboard memory size. + * * Comb the init routine. It's still a bit cludgy on a few things. */ #include <linux/kernel.h> @@ -105,74 +105,77 @@ static struct mtd_info *pmc551list; -static int pmc551_erase (struct mtd_info *mtd, struct erase_info *instr) +static int pmc551_erase(struct mtd_info *mtd, struct erase_info *instr) { - struct mypriv *priv = mtd->priv; - u32 soff_hi, soff_lo; /* start address offset hi/lo */ - u32 eoff_hi, eoff_lo; /* end address offset hi/lo */ - unsigned long end; + struct mypriv *priv = mtd->priv; + u32 soff_hi, soff_lo; /* start address offset hi/lo */ + u32 eoff_hi, eoff_lo; /* end address offset hi/lo */ + unsigned long end; u_char *ptr; size_t retlen; #ifdef CONFIG_MTD_PMC551_DEBUG - printk(KERN_DEBUG "pmc551_erase(pos:%ld, len:%ld)\n", (long)instr->addr, (long)instr->len); + printk(KERN_DEBUG "pmc551_erase(pos:%ld, len:%ld)\n", (long)instr->addr, + (long)instr->len); #endif - end = instr->addr + instr->len - 1; + end = instr->addr + instr->len - 1; - /* Is it past the end? */ - if ( end > mtd->size ) { + /* Is it past the end? */ + if (end > mtd->size) { #ifdef CONFIG_MTD_PMC551_DEBUG - printk(KERN_DEBUG "pmc551_erase() out of bounds (%ld > %ld)\n", (long)end, (long)mtd->size); + printk(KERN_DEBUG "pmc551_erase() out of bounds (%ld > %ld)\n", + (long)end, (long)mtd->size); #endif - return -EINVAL; - } - - eoff_hi = end & ~(priv->asize - 1); - soff_hi = instr->addr & ~(priv->asize - 1); - eoff_lo = end & (priv->asize - 1); - soff_lo = instr->addr & (priv->asize - 1); - - pmc551_point (mtd, instr->addr, instr->len, &retlen, &ptr); - - if ( soff_hi == eoff_hi || mtd->size == priv->asize) { - /* The whole thing fits within one access, so just one shot - will do it. */ - memset(ptr, 0xff, instr->len); - } else { - /* We have to do multiple writes to get all the data - written. */ - while (soff_hi != eoff_hi) { + return -EINVAL; + } + + eoff_hi = end & ~(priv->asize - 1); + soff_hi = instr->addr & ~(priv->asize - 1); + eoff_lo = end & (priv->asize - 1); + soff_lo = instr->addr & (priv->asize - 1); + + pmc551_point(mtd, instr->addr, instr->len, &retlen, &ptr); + + if (soff_hi == eoff_hi || mtd->size == priv->asize) { + /* The whole thing fits within one access, so just one shot + will do it. */ + memset(ptr, 0xff, instr->len); + } else { + /* We have to do multiple writes to get all the data + written. */ + while (soff_hi != eoff_hi) { #ifdef CONFIG_MTD_PMC551_DEBUG - printk( KERN_DEBUG "pmc551_erase() soff_hi: %ld, eoff_hi: %ld\n", (long)soff_hi, (long)eoff_hi); + printk(KERN_DEBUG "pmc551_erase() soff_hi: %ld, " + "eoff_hi: %ld\n", (long)soff_hi, (long)eoff_hi); #endif - memset(ptr, 0xff, priv->asize); - if (soff_hi + priv->asize >= mtd->size) { - goto out; - } - soff_hi += priv->asize; - pmc551_point (mtd,(priv->base_map0|soff_hi), - priv->asize, &retlen, &ptr); - } - memset (ptr, 0xff, eoff_lo); - } - -out: + memset(ptr, 0xff, priv->asize); + if (soff_hi + priv->asize >= mtd->size) { + goto out; + } + soff_hi += priv->asize; + pmc551_point(mtd, (priv->base_map0 | soff_hi), + priv->asize, &retlen, &ptr); + } + memset(ptr, 0xff, eoff_lo); + } + + out: instr->state = MTD_ERASE_DONE; #ifdef CONFIG_MTD_PMC551_DEBUG printk(KERN_DEBUG "pmc551_erase() done\n"); #endif - mtd_erase_callback(instr); - return 0; + mtd_erase_callback(instr); + return 0; } - -static int pmc551_point (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char **mtdbuf) +static int pmc551_point(struct mtd_info *mtd, loff_t from, size_t len, + size_t * retlen, u_char ** mtdbuf) { - struct mypriv *priv = mtd->priv; - u32 soff_hi; - u32 soff_lo; + struct mypriv *priv = mtd->priv; + u32 soff_hi; + u32 soff_lo; #ifdef CONFIG_MTD_PMC551_DEBUG printk(KERN_DEBUG "pmc551_point(%ld, %ld)\n", (long)from, (long)len); @@ -180,18 +183,19 @@ static int pmc551_point (struct mtd_info *mtd, loff_t from, size_t len, size_t * if (from + len > mtd->size) { #ifdef CONFIG_MTD_PMC551_DEBUG - printk(KERN_DEBUG "pmc551_point() out of bounds (%ld > %ld)\n", (long)from+len, (long)mtd->size); + printk(KERN_DEBUG "pmc551_point() out of bounds (%ld > %ld)\n", + (long)from + len, (long)mtd->size); #endif return -EINVAL; } - soff_hi = from & ~(priv->asize - 1); - soff_lo = from & (priv->asize - 1); + soff_hi = from & ~(priv->asize - 1); + soff_lo = from & (priv->asize - 1); /* Cheap hack optimization */ - if( priv->curr_map0 != from ) { - pci_write_config_dword ( priv->dev, PMC551_PCI_MEM_MAP0, - (priv->base_map0 | soff_hi) ); + if (priv->curr_map0 != from) { + pci_write_config_dword(priv->dev, PMC551_PCI_MEM_MAP0, + (priv->base_map0 | soff_hi)); priv->curr_map0 = soff_hi; } @@ -200,137 +204,144 @@ static int pmc551_point (struct mtd_info *mtd, loff_t from, size_t len, size_t * return 0; } - -static void pmc551_unpoint (struct mtd_info *mtd, u_char *addr, loff_t from, size_t len) +static void pmc551_unpoint(struct mtd_info *mtd, u_char * addr, loff_t from, + size_t len) { #ifdef CONFIG_MTD_PMC551_DEBUG printk(KERN_DEBUG "pmc551_unpoint()\n"); #endif } - -static int pmc551_read (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) +static int pmc551_read(struct mtd_info *mtd, loff_t from, size_t len, + size_t * retlen, u_char * buf) { - struct mypriv *priv = mtd->priv; - u32 soff_hi, soff_lo; /* start address offset hi/lo */ - u32 eoff_hi, eoff_lo; /* end address offset hi/lo */ - unsigned long end; + struct mypriv *priv = mtd->priv; + u32 soff_hi, soff_lo; /* start address offset hi/lo */ + u32 eoff_hi, eoff_lo; /* end address offset hi/lo */ + unsigned long end; u_char *ptr; - u_char *copyto = buf; + u_char *copyto = buf; #ifdef CONFIG_MTD_PMC551_DEBUG - printk(KERN_DEBUG "pmc551_read(pos:%ld, len:%ld) asize: %ld\n", (long)from, (long)len, (long)priv->asize); + printk(KERN_DEBUG "pmc551_read(pos:%ld, len:%ld) asize: %ld\n", + (long)from, (long)len, (long)priv->asize); #endif - end = from + len - 1; + end = from + len - 1; - /* Is it past the end? */ - if (end > mtd->size) { + /* Is it past the end? */ + if (end > mtd->size) { #ifdef CONFIG_MTD_PMC551_DEBUG - printk(KERN_DEBUG "pmc551_read() out of bounds (%ld > %ld)\n", (long) end, (long)mtd->size); + printk(KERN_DEBUG "pmc551_read() out of bounds (%ld > %ld)\n", + (long)end, (long)mtd->size); #endif - return -EINVAL; - } - - soff_hi = from & ~(priv->asize - 1); - eoff_hi = end & ~(priv->asize - 1); - soff_lo = from & (priv->asize - 1); - eoff_lo = end & (priv->asize - 1); - - pmc551_point (mtd, from, len, retlen, &ptr); - - if (soff_hi == eoff_hi) { - /* The whole thing fits within one access, so just one shot - will do it. */ - memcpy(copyto, ptr, len); - copyto += len; - } else { - /* We have to do multiple writes to get all the data - written. */ - while (soff_hi != eoff_hi) { + return -EINVAL; + } + + soff_hi = from & ~(priv->asize - 1); + eoff_hi = end & ~(priv->asize - 1); + soff_lo = from & (priv->asize - 1); + eoff_lo = end & (priv->asize - 1); + + pmc551_point(mtd, from, len, retlen, &ptr); + + if (soff_hi == eoff_hi) { + /* The whole thing fits within one access, so just one shot + will do it. */ + memcpy(copyto, ptr, len); + copyto += len; + } else { + /* We have to do multiple writes to get all the data + written. */ + while (soff_hi != eoff_hi) { #ifdef CONFIG_MTD_PMC551_DEBUG - printk( KERN_DEBUG "pmc551_read() soff_hi: %ld, eoff_hi: %ld\n", (long)soff_hi, (long)eoff_hi); + printk(KERN_DEBUG "pmc551_read() soff_hi: %ld, " + "eoff_hi: %ld\n", (long)soff_hi, (long)eoff_hi); #endif - memcpy(copyto, ptr, priv->asize); - copyto += priv->asize; - if (soff_hi + priv->asize >= mtd->size) { - goto out; - } - soff_hi += priv->asize; - pmc551_point (mtd, soff_hi, priv->asize, retlen, &ptr); - } - memcpy(copyto, ptr, eoff_lo); - copyto += eoff_lo; - } - -out: + memcpy(copyto, ptr, priv->asize); + copyto += priv->asize; + if (soff_hi + priv->asize >= mtd->size) { + goto out; + } + soff_hi += priv->asize; + pmc551_point(mtd, soff_hi, priv->asize, retlen, &ptr); + } + memcpy(copyto, ptr, eoff_lo); + copyto += eoff_lo; + } + + out: #ifdef CONFIG_MTD_PMC551_DEBUG printk(KERN_DEBUG "pmc551_read() done\n"); #endif - *retlen = copyto - buf; - return 0; + *retlen = copyto - buf; + return 0; } -static int pmc551_write (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf) +static int pmc551_write(struct mtd_info *mtd, loff_t to, size_t len, + size_t * retlen, const u_char * buf) { - struct mypriv *priv = mtd->priv; - u32 soff_hi, soff_lo; /* start address offset hi/lo */ - u32 eoff_hi, eoff_lo; /* end address offset hi/lo */ - unsigned long end; + struct mypriv *priv = mtd->priv; + u32 soff_hi, soff_lo; /* start address offset hi/lo */ + u32 eoff_hi, eoff_lo; /* end address offset hi/lo */ + unsigned long end; u_char *ptr; - const u_char *copyfrom = buf; - + const u_char *copyfrom = buf; #ifdef CONFIG_MTD_PMC551_DEBUG - printk(KERN_DEBUG "pmc551_write(pos:%ld, len:%ld) asize:%ld\n", (long)to, (long)len, (long)priv->asize); + printk(KERN_DEBUG "pmc551_write(pos:%ld, len:%ld) asize:%ld\n", + (long)to, (long)len, (long)priv->asize); #endif - end = to + len - 1; - /* Is it past the end? or did the u32 wrap? */ - if (end > mtd->size ) { + end = to + len - 1; + /* Is it past the end? or did the u32 wrap? */ + if (end > mtd->size) { #ifdef CONFIG_MTD_PMC551_DEBUG - printk(KERN_DEBUG "pmc551_write() out of bounds (end: %ld, size: %ld, to: %ld)\n", (long) end, (long)mtd->size, (long)to); + printk(KERN_DEBUG "pmc551_write() out of bounds (end: %ld, " + "size: %ld, to: %ld)\n", (long)end, (long)mtd->size, + (long)to); #endif - return -EINVAL; - } - - soff_hi = to & ~(priv->asize - 1); - eoff_hi = end & ~(priv->asize - 1); - soff_lo = to & (priv->asize - 1); - eoff_lo = end & (priv->asize - 1); - - pmc551_point (mtd, to, len, retlen, &ptr); - - if (soff_hi == eoff_hi) { - /* The whole thing fits within one access, so just one shot - will do it. */ - memcpy(ptr, copyfrom, len); - copyfrom += len; - } else { - /* We have to do multiple writes to get all the data - written. */ - while (soff_hi != eoff_hi) { + return -EINVAL; + } + + soff_hi = to & ~(priv->asize - 1); + eoff_hi = end & ~(priv->asize - 1); + soff_lo = to & (priv->asize - 1); + eoff_lo = end & (priv->asize - 1); + + pmc551_point(mtd, to, len, retlen, &ptr); + + if (soff_hi == eoff_hi) { + /* The whole thing fits within one access, so just one shot + will do it. */ + memcpy(ptr, copyfrom, len); + copyfrom += len; + } else { + /* We have to do multiple writes to get all the data + written. */ + while (soff_hi != eoff_hi) { #ifdef CONFIG_MTD_PMC551_DEBUG - printk( KERN_DEBUG "pmc551_write() soff_hi: %ld, eoff_hi: %ld\n", (long)soff_hi, (long)eoff_hi); + printk(KERN_DEBUG "pmc551_write() soff_hi: %ld, " + "eoff_hi: %ld\n", (long)soff_hi, (long)eoff_hi); #endif - memcpy(ptr, copyfrom, priv->asize); - copyfrom += priv->asize; - if (soff_hi >= mtd->size) { - goto out; - } - soff_hi += priv->asize; - pmc551_point (mtd, soff_hi, priv->asize, retlen, &ptr); - } - memcpy(ptr, copyfrom, eoff_lo); - copyfrom += eoff_lo; - } - -out: + memcpy(ptr, copyfrom, priv->asize); + copyfrom += priv->asize; + if (soff_hi >= mtd->size) { + goto out; + } + soff_hi += priv->asize; + pmc551_point(mtd, soff_hi, priv->asize, retlen, &ptr); + } + memcpy(ptr, copyfrom, eoff_lo); + copyfrom += eoff_lo; + } + + out: #ifdef CONFIG_MTD_PMC551_DEBUG printk(KERN_DEBUG "pmc551_write() done\n"); #endif - *retlen = copyfrom - buf; - return 0; + *retlen = copyfrom - buf; + return 0; } /* @@ -345,58 +356,58 @@ out: * mechanism * returns the size of the memory region found. */ -static u32 fixup_pmc551 (struct pci_dev *dev) +static u32 fixup_pmc551(struct pci_dev *dev) { #ifdef CONFIG_MTD_PMC551_BUGFIX - u32 dram_data; + u32 dram_data; #endif - u32 size, dcmd, cfg, dtmp; - u16 cmd, tmp, i; + u32 size, dcmd, cfg, dtmp; + u16 cmd, tmp, i; u8 bcmd, counter; - /* Sanity Check */ - if(!dev) { - return -ENODEV; - } + /* Sanity Check */ + if (!dev) { + return -ENODEV; + } /* * Attempt to reset the card * FIXME: Stop Spinning registers */ - counter=0; + counter = 0; /* unlock registers */ - pci_write_config_byte(dev, PMC551_SYS_CTRL_REG, 0xA5 ); + pci_write_config_byte(dev, PMC551_SYS_CTRL_REG, 0xA5); /* read in old data */ - pci_read_config_byte(dev, PMC551_SYS_CTRL_REG, &bcmd ); + pci_read_config_byte(dev, PMC551_SYS_CTRL_REG, &bcmd); /* bang the reset line up and down for a few */ - for(i=0;i<10;i++) { - counter=0; + for (i = 0; i < 10; i++) { + counter = 0; bcmd &= ~0x80; - while(counter++ < 100) { + while (counter++ < 100) { pci_write_config_byte(dev, PMC551_SYS_CTRL_REG, bcmd); } - counter=0; + counter = 0; bcmd |= 0x80; - while(counter++ < 100) { + while (counter++ < 100) { pci_write_config_byte(dev, PMC551_SYS_CTRL_REG, bcmd); } } - bcmd |= (0x40|0x20); + bcmd |= (0x40 | 0x20); pci_write_config_byte(dev, PMC551_SYS_CTRL_REG, bcmd); - /* + /* * Take care and turn off the memory on the device while we * tweak the configurations */ - pci_read_config_word(dev, PCI_COMMAND, &cmd); - tmp = cmd & ~(PCI_COMMAND_IO|PCI_COMMAND_MEMORY); - pci_write_config_word(dev, PCI_COMMAND, tmp); + pci_read_config_word(dev, PCI_COMMAND, &cmd); + tmp = cmd & ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY); + pci_write_config_word(dev, PCI_COMMAND, tmp); /* * Disable existing aperture before probing memory size */ pci_read_config_dword(dev, PMC551_PCI_MEM_MAP0, &dcmd); - dtmp=(dcmd|PMC551_PCI_MEM_MAP_ENABLE|PMC551_PCI_MEM_MAP_REG_EN); + dtmp = (dcmd | PMC551_PCI_MEM_MAP_ENABLE | PMC551_PCI_MEM_MAP_REG_EN); pci_write_config_dword(dev, PMC551_PCI_MEM_MAP0, dtmp); /* * Grab old BAR0 config so that we can figure out memory size @@ -407,220 +418,231 @@ static u32 fixup_pmc551 (struct pci_dev *dev) * then write all 1's to the memory space, read back the result into * "size", and then write back all the old config. */ - pci_read_config_dword( dev, PCI_BASE_ADDRESS_0, &cfg ); + pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &cfg); #ifndef CONFIG_MTD_PMC551_BUGFIX - pci_write_config_dword( dev, PCI_BASE_ADDRESS_0, ~0 ); - pci_read_config_dword( dev, PCI_BASE_ADDRESS_0, &size ); - size = (size&PCI_BASE_ADDRESS_MEM_MASK); - size &= ~(size-1); - pci_write_config_dword( dev, PCI_BASE_ADDRESS_0, cfg ); + pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, ~0); + pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &size); + size = (size & PCI_BASE_ADDRESS_MEM_MASK); + size &= ~(size - 1); + pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, cfg); #else - /* - * Get the size of the memory by reading all the DRAM size values - * and adding them up. - * - * KLUDGE ALERT: the boards we are using have invalid column and - * row mux values. We fix them here, but this will break other - * memory configurations. - */ - pci_read_config_dword(dev, PMC551_DRAM_BLK0, &dram_data); - size = PMC551_DRAM_BLK_GET_SIZE(dram_data); - dram_data = PMC551_DRAM_BLK_SET_COL_MUX(dram_data, 0x5); - dram_data = PMC551_DRAM_BLK_SET_ROW_MUX(dram_data, 0x9); - pci_write_config_dword(dev, PMC551_DRAM_BLK0, dram_data); - - pci_read_config_dword(dev, PMC551_DRAM_BLK1, &dram_data); - size += PMC551_DRAM_BLK_GET_SIZE(dram_data); - dram_data = PMC551_DRAM_BLK_SET_COL_MUX(dram_data, 0x5); - dram_data = PMC551_DRAM_BLK_SET_ROW_MUX(dram_data, 0x9); - pci_write_config_dword(dev, PMC551_DRAM_BLK1, dram_data); - - pci_read_config_dword(dev, PMC551_DRAM_BLK2, &dram_data); - size += PMC551_DRAM_BLK_GET_SIZE(dram_data); - dram_data = PMC551_DRAM_BLK_SET_COL_MUX(dram_data, 0x5); - dram_data = PMC551_DRAM_BLK_SET_ROW_MUX(dram_data, 0x9); - pci_write_config_dword(dev, PMC551_DRAM_BLK2, dram_data); - - pci_read_config_dword(dev, PMC551_DRAM_BLK3, &dram_data); - size += PMC551_DRAM_BLK_GET_SIZE(dram_data); - dram_data = PMC551_DRAM_BLK_SET_COL_MUX(dram_data, 0x5); - dram_data = PMC551_DRAM_BLK_SET_ROW_MUX(dram_data, 0x9); - pci_write_config_dword(dev, PMC551_DRAM_BLK3, dram_data); - - /* - * Oops .. something went wrong - */ - if( (size &= PCI_BASE_ADDRESS_MEM_MASK) == 0) { - return -ENODEV; - } -#endif /* CONFIG_MTD_PMC551_BUGFIX */ - - if ((cfg&PCI_BASE_ADDRESS_SPACE) != PCI_BASE_ADDRESS_SPACE_MEMORY) { - return -ENODEV; + /* + * Get the size of the memory by reading all the DRAM size values + * and adding them up. + * + * KLUDGE ALERT: the boards we are using have invalid column and + * row mux values. We fix them here, but this will break other + * memory configurations. + */ + pci_read_config_dword(dev, PMC551_DRAM_BLK0, &dram_data); + size = PMC551_DRAM_BLK_GET_SIZE(dram_data); + dram_data = PMC551_DRAM_BLK_SET_COL_MUX(dram_data, 0x5); + dram_data = PMC551_DRAM_BLK_SET_ROW_MUX(dram_data, 0x9); + pci_write_config_dword(dev, PMC551_DRAM_BLK0, dram_data); + + pci_read_config_dword(dev, PMC551_DRAM_BLK1, &dram_data); + size += PMC551_DRAM_BLK_GET_SIZE(dram_data); + dram_data = PMC551_DRAM_BLK_SET_COL_MUX(dram_data, 0x5); + dram_data = PMC551_DRAM_BLK_SET_ROW_MUX(dram_data, 0x9); + pci_write_config_dword(dev, PMC551_DRAM_BLK1, dram_data); + + pci_read_config_dword(dev, PMC551_DRAM_BLK2, &dram_data); + size += PMC551_DRAM_BLK_GET_SIZE(dram_data); + dram_data = PMC551_DRAM_BLK_SET_COL_MUX(dram_data, 0x5); + dram_data = PMC551_DRAM_BLK_SET_ROW_MUX(dram_data, 0x9); + pci_write_config_dword(dev, PMC551_DRAM_BLK2, dram_data); + + pci_read_config_dword(dev, PMC551_DRAM_BLK3, &dram_data); + size += PMC551_DRAM_BLK_GET_SIZE(dram_data); + dram_data = PMC551_DRAM_BLK_SET_COL_MUX(dram_data, 0x5); + dram_data = PMC551_DRAM_BLK_SET_ROW_MUX(dram_data, 0x9); + pci_write_config_dword(dev, PMC551_DRAM_BLK3, dram_data); + + /* + * Oops .. something went wrong + */ + if ((size &= PCI_BASE_ADDRESS_MEM_MASK) == 0) { + return -ENODEV; } +#endif /* CONFIG_MTD_PMC551_BUGFIX */ - /* - * Precharge Dram - */ - pci_write_config_word( dev, PMC551_SDRAM_MA, 0x0400 ); - pci_write_config_word( dev, PMC551_SDRAM_CMD, 0x00bf ); - - /* - * Wait until command has gone through - * FIXME: register spinning issue - */ - do { pci_read_config_word( dev, PMC551_SDRAM_CMD, &cmd ); - if(counter++ > 100)break; - } while ( (PCI_COMMAND_IO) & cmd ); - - /* + if ((cfg & PCI_BASE_ADDRESS_SPACE) != PCI_BASE_ADDRESS_SPACE_MEMORY) { + return -ENODEV; + } + + /* + * Precharge Dram + */ + pci_write_config_word(dev, PMC551_SDRAM_MA, 0x0400); + pci_write_config_word(dev, PMC551_SDRAM_CMD, 0x00bf); + + /* + * Wait until command has gone through + * FIXME: register spinning issue + */ + do { + pci_read_config_word(dev, PMC551_SDRAM_CMD, &cmd); + if (counter++ > 100) + break; + } while ((PCI_COMMAND_IO) & cmd); + + /* * Turn on auto refresh * The loop is taken directly from Ramix's example code. I assume that * this must be held high for some duration of time, but I can find no * documentation refrencing the reasons why. - */ - for ( i = 1; i<=8 ; i++) { - pci_write_config_word (dev, PMC551_SDRAM_CMD, 0x0df); - - /* - * Make certain command has gone through - * FIXME: register spinning issue - */ - counter=0; - do { pci_read_config_word(dev, PMC551_SDRAM_CMD, &cmd); - if(counter++ > 100)break; - } while ( (PCI_COMMAND_IO) & cmd ); - } - - pci_write_config_word ( dev, PMC551_SDRAM_MA, 0x0020); - pci_write_config_word ( dev, PMC551_SDRAM_CMD, 0x0ff); - - /* - * Wait until command completes - * FIXME: register spinning issue - */ - counter=0; - do { pci_read_config_word ( dev, PMC551_SDRAM_CMD, &cmd); - if(counter++ > 100)break; - } while ( (PCI_COMMAND_IO) & cmd ); - - pci_read_config_dword ( dev, PMC551_DRAM_CFG, &dcmd); - dcmd |= 0x02000000; - pci_write_config_dword ( dev, PMC551_DRAM_CFG, dcmd); - - /* - * Check to make certain fast back-to-back, if not - * then set it so - */ - pci_read_config_word( dev, PCI_STATUS, &cmd); - if((cmd&PCI_COMMAND_FAST_BACK) == 0) { - cmd |= PCI_COMMAND_FAST_BACK; - pci_write_config_word( dev, PCI_STATUS, cmd); - } - - /* - * Check to make certain the DEVSEL is set correctly, this device - * has a tendancy to assert DEVSEL and TRDY when a write is performed - * to the memory when memory is read-only - */ - if((cmd&PCI_STATUS_DEVSEL_MASK) != 0x0) { - cmd &= ~PCI_STATUS_DEVSEL_MASK; - pci_write_config_word( dev, PCI_STATUS, cmd ); - } - /* - * Set to be prefetchable and put everything back based on old cfg. + */ + for (i = 1; i <= 8; i++) { + pci_write_config_word(dev, PMC551_SDRAM_CMD, 0x0df); + + /* + * Make certain command has gone through + * FIXME: register spinning issue + */ + counter = 0; + do { + pci_read_config_word(dev, PMC551_SDRAM_CMD, &cmd); + if (counter++ > 100) + break; + } while ((PCI_COMMAND_IO) & cmd); + } + + pci_write_config_word(dev, PMC551_SDRAM_MA, 0x0020); + pci_write_config_word(dev, PMC551_SDRAM_CMD, 0x0ff); + + /* + * Wait until command completes + * FIXME: register spinning issue + */ + counter = 0; + do { + pci_read_config_word(dev, PMC551_SDRAM_CMD, &cmd); + if (counter++ > 100) + break; + } while ((PCI_COMMAND_IO) & cmd); + + pci_read_config_dword(dev, PMC551_DRAM_CFG, &dcmd); + dcmd |= 0x02000000; + pci_write_config_dword(dev, PMC551_DRAM_CFG, dcmd); + + /* + * Check to make certain fast back-to-back, if not + * then set it so + */ + pci_read_config_word(dev, PCI_STATUS, &cmd); + if ((cmd & PCI_COMMAND_FAST_BACK) == 0) { + cmd |= PCI_COMMAND_FAST_BACK; + pci_write_config_word(dev, PCI_STATUS, cmd); + } + + /* + * Check to make certain the DEVSEL is set correctly, this device + * has a tendancy to assert DEVSEL and TRDY when a write is performed + * to the memory when memory is read-only + */ + if ((cmd & PCI_STATUS_DEVSEL_MASK) != 0x0) { + cmd &= ~PCI_STATUS_DEVSEL_MASK; + pci_write_config_word(dev, PCI_STATUS, cmd); + } + /* + * Set to be prefetchable and put everything back based on old cfg. * it's possible that the reset of the V370PDC nuked the original * setup - */ + */ /* - cfg |= PCI_BASE_ADDRESS_MEM_PREFETCH; - pci_write_config_dword( dev, PCI_BASE_ADDRESS_0, cfg ); - */ - - /* - * Turn PCI memory and I/O bus access back on - */ - pci_write_config_word( dev, PCI_COMMAND, - PCI_COMMAND_MEMORY | PCI_COMMAND_IO ); + cfg |= PCI_BASE_ADDRESS_MEM_PREFETCH; + pci_write_config_dword( dev, PCI_BASE_ADDRESS_0, cfg ); + */ + + /* + * Turn PCI memory and I/O bus access back on + */ + pci_write_config_word(dev, PCI_COMMAND, + PCI_COMMAND_MEMORY | PCI_COMMAND_IO); #ifdef CONFIG_MTD_PMC551_DEBUG - /* - * Some screen fun - */ - printk(KERN_DEBUG "pmc551: %d%c (0x%x) of %sprefetchable memory at 0x%llx\n", - (size<1024)?size:(size<1048576)?size>>10:size>>20, - (size<1024)?'B':(size<1048576)?'K':'M', - size, ((dcmd&(0x1<<3)) == 0)?"non-":"", - (unsigned long long)((dev->resource[0].start)&PCI_BASE_ADDRESS_MEM_MASK)); - - /* - * Check to see the state of the memory - */ - pci_read_config_dword( dev, PMC551_DRAM_BLK0, &dcmd ); - printk(KERN_DEBUG "pmc551: DRAM_BLK0 Flags: %s,%s\n" - "pmc551: DRAM_BLK0 Size: %d at %d\n" - "pmc551: DRAM_BLK0 Row MUX: %d, Col MUX: %d\n", - (((0x1<<1)&dcmd) == 0)?"RW":"RO", - (((0x1<<0)&dcmd) == 0)?"Off":"On", - PMC551_DRAM_BLK_GET_SIZE(dcmd), - ((dcmd>>20)&0x7FF), ((dcmd>>13)&0x7), ((dcmd>>9)&0xF) ); - - pci_read_config_dword( dev, PMC551_DRAM_BLK1, &dcmd ); - printk(KERN_DEBUG "pmc551: DRAM_BLK1 Flags: %s,%s\n" - "pmc551: DRAM_BLK1 Size: %d at %d\n" - "pmc551: DRAM_BLK1 Row MUX: %d, Col MUX: %d\n", - (((0x1<<1)&dcmd) == 0)?"RW":"RO", - (((0x1<<0)&dcmd) == 0)?"Off":"On", - PMC551_DRAM_BLK_GET_SIZE(dcmd), - ((dcmd>>20)&0x7FF), ((dcmd>>13)&0x7), ((dcmd>>9)&0xF) ); - - pci_read_config_dword( dev, PMC551_DRAM_BLK2, &dcmd ); - printk(KERN_DEBUG "pmc551: DRAM_BLK2 Flags: %s,%s\n" - "pmc551: DRAM_BLK2 Size: %d at %d\n" - "pmc551: DRAM_BLK2 Row MUX: %d, Col MUX: %d\n", - (((0x1<<1)&dcmd) == 0)?"RW":"RO", - (((0x1<<0)&dcmd) == 0)?"Off":"On", - PMC551_DRAM_BLK_GET_SIZE(dcmd), - ((dcmd>>20)&0x7FF), ((dcmd>>13)&0x7), ((dcmd>>9)&0xF) ); - - pci_read_config_dword( dev, PMC551_DRAM_BLK3, &dcmd ); - printk(KERN_DEBUG "pmc551: DRAM_BLK3 Flags: %s,%s\n" - "pmc551: DRAM_BLK3 Size: %d at %d\n" - "pmc551: DRAM_BLK3 Row MUX: %d, Col MUX: %d\n", - (((0x1<<1)&dcmd) == 0)?"RW":"RO", - (((0x1<<0)&dcmd) == 0)?"Off":"On", - PMC551_DRAM_BLK_GET_SIZE(dcmd), - ((dcmd>>20)&0x7FF), ((dcmd>>13)&0x7), ((dcmd>>9)&0xF) ); - - pci_read_config_word( dev, PCI_COMMAND, &cmd ); - printk( KERN_DEBUG "pmc551: Memory Access %s\n", - (((0x1<<1)&cmd) == 0)?"off":"on" ); - printk( KERN_DEBUG "pmc551: I/O Access %s\n", - (((0x1<<0)&cmd) == 0)?"off":"on" ); - - pci_read_config_word( dev, PCI_STATUS, &cmd ); - printk( KERN_DEBUG "pmc551: Devsel %s\n", - ((PCI_STATUS_DEVSEL_MASK&cmd)==0x000)?"Fast": - ((PCI_STATUS_DEVSEL_MASK&cmd)==0x200)?"Medium": - ((PCI_STATUS_DEVSEL_MASK&cmd)==0x400)?"Slow":"Invalid" ); - - printk( KERN_DEBUG "pmc551: %sFast Back-to-Back\n", - ((PCI_COMMAND_FAST_BACK&cmd) == 0)?"Not ":"" ); - - pci_read_config_byte(dev, PMC551_SYS_CTRL_REG, &bcmd ); - printk( KERN_DEBUG "pmc551: EEPROM is under %s control\n" - "pmc551: System Control Register is %slocked to PCI access\n" - "pmc551: System Control Register is %slocked to EEPROM access\n", - (bcmd&0x1)?"software":"hardware", - (bcmd&0x20)?"":"un", (bcmd&0x40)?"":"un"); + /* + * Some screen fun + */ + printk(KERN_DEBUG "pmc551: %d%c (0x%x) of %sprefetchable memory at " + "0x%llx\n", (size < 1024) ? size : (size < 1048576) ? + size >> 10 : size >> 20, + (size < 1024) ? 'B' : (size < 1048576) ? 'K' : 'M', size, + ((dcmd & (0x1 << 3)) == 0) ? "non-" : "", + (unsigned long long)((dev->resource[0].start) & + PCI_BASE_ADDRESS_MEM_MASK)); + + /* + * Check to see the state of the memory + */ + pci_read_config_dword(dev, PMC551_DRAM_BLK0, &dcmd); + printk(KERN_DEBUG "pmc551: DRAM_BLK0 Flags: %s,%s\n" + "pmc551: DRAM_BLK0 Size: %d at %d\n" + "pmc551: DRAM_BLK0 Row MUX: %d, Col MUX: %d\n", + (((0x1 << 1) & dcmd) == 0) ? "RW" : "RO", + (((0x1 << 0) & dcmd) == 0) ? "Off" : "On", + PMC551_DRAM_BLK_GET_SIZE(dcmd), + ((dcmd >> 20) & 0x7FF), ((dcmd >> 13) & 0x7), + ((dcmd >> 9) & 0xF)); + + pci_read_config_dword(dev, PMC551_DRAM_BLK1, &dcmd); + printk(KERN_DEBUG "pmc551: DRAM_BLK1 Flags: %s,%s\n" + "pmc551: DRAM_BLK1 Size: %d at %d\n" + "pmc551: DRAM_BLK1 Row MUX: %d, Col MUX: %d\n", + (((0x1 << 1) & dcmd) == 0) ? "RW" : "RO", + (((0x1 << 0) & dcmd) == 0) ? "Off" : "On", + PMC551_DRAM_BLK_GET_SIZE(dcmd), + ((dcmd >> 20) & 0x7FF), ((dcmd >> 13) & 0x7), + ((dcmd >> 9) & 0xF)); + + pci_read_config_dword(dev, PMC551_DRAM_BLK2, &dcmd); + printk(KERN_DEBUG "pmc551: DRAM_BLK2 Flags: %s,%s\n" + "pmc551: DRAM_BLK2 Size: %d at %d\n" + "pmc551: DRAM_BLK2 Row MUX: %d, Col MUX: %d\n", + (((0x1 << 1) & dcmd) == 0) ? "RW" : "RO", + (((0x1 << 0) & dcmd) == 0) ? "Off" : "On", + PMC551_DRAM_BLK_GET_SIZE(dcmd), + ((dcmd >> 20) & 0x7FF), ((dcmd >> 13) & 0x7), + ((dcmd >> 9) & 0xF)); + + pci_read_config_dword(dev, PMC551_DRAM_BLK3, &dcmd); + printk(KERN_DEBUG "pmc551: DRAM_BLK3 Flags: %s,%s\n" + "pmc551: DRAM_BLK3 Size: %d at %d\n" + "pmc551: DRAM_BLK3 Row MUX: %d, Col MUX: %d\n", + (((0x1 << 1) & dcmd) == 0) ? "RW" : "RO", + (((0x1 << 0) & dcmd) == 0) ? "Off" : "On", + PMC551_DRAM_BLK_GET_SIZE(dcmd), + ((dcmd >> 20) & 0x7FF), ((dcmd >> 13) & 0x7), + ((dcmd >> 9) & 0xF)); + + pci_read_config_word(dev, PCI_COMMAND, &cmd); + printk(KERN_DEBUG "pmc551: Memory Access %s\n", + (((0x1 << 1) & cmd) == 0) ? "off" : "on"); + printk(KERN_DEBUG "pmc551: I/O Access %s\n", + (((0x1 << 0) & cmd) == 0) ? "off" : "on"); + + pci_read_config_word(dev, PCI_STATUS, &cmd); + printk(KERN_DEBUG "pmc551: Devsel %s\n", + ((PCI_STATUS_DEVSEL_MASK & cmd) == 0x000) ? "Fast" : + ((PCI_STATUS_DEVSEL_MASK & cmd) == 0x200) ? "Medium" : + ((PCI_STATUS_DEVSEL_MASK & cmd) == 0x400) ? "Slow" : "Invalid"); + + printk(KERN_DEBUG "pmc551: %sFast Back-to-Back\n", + ((PCI_COMMAND_FAST_BACK & cmd) == 0) ? "Not " : ""); + + pci_read_config_byte(dev, PMC551_SYS_CTRL_REG, &bcmd); + printk(KERN_DEBUG "pmc551: EEPROM is under %s control\n" + "pmc551: System Control Register is %slocked to PCI access\n" + "pmc551: System Control Register is %slocked to EEPROM access\n", + (bcmd & 0x1) ? "software" : "hardware", + (bcmd & 0x20) ? "" : "un", (bcmd & 0x40) ? "" : "un"); #endif - return size; + return size; } /* * Kernel version specific module stuffages */ - MODULE_LICENSE("GPL"); MODULE_AUTHOR("Mark Ferrell <mferrell@mvista.com>"); MODULE_DESCRIPTION(PMC551_VERSION); @@ -628,11 +650,11 @@ MODULE_DESCRIPTION(PMC551_VERSION); /* * Stuff these outside the ifdef so as to not bust compiled in driver support */ -static int msize=0; +static int msize = 0; #if defined(CONFIG_MTD_PMC551_APERTURE_SIZE) -static int asize=CONFIG_MTD_PMC551_APERTURE_SIZE +static int asize = CONFIG_MTD_PMC551_APERTURE_SIZE #else -static int asize=0; +static int asize = 0; #endif module_param(msize, int, 0); @@ -645,172 +667,179 @@ MODULE_PARM_DESC(asize, "aperture size, must be <= memsize [1-1024]"); */ static int __init init_pmc551(void) { - struct pci_dev *PCI_Device = NULL; - struct mypriv *priv; - int count, found=0; - struct mtd_info *mtd; - u32 length = 0; - - if(msize) { - msize = (1 << (ffs(msize) - 1))<<20; - if (msize > (1<<30)) { - printk(KERN_NOTICE "pmc551: Invalid memory size [%d]\n", msize); + struct pci_dev *PCI_Device = NULL; + struct mypriv *priv; + int count, found = 0; + struct mtd_info *mtd; + u32 length = 0; + + if (msize) { + msize = (1 << (ffs(msize) - 1)) << 20; + if (msize > (1 << 30)) { + printk(KERN_NOTICE "pmc551: Invalid memory size [%d]\n", + msize); return -EINVAL; } } - if(asize) { - asize = (1 << (ffs(asize) - 1))<<20; - if (asize > (1<<30) ) { - printk(KERN_NOTICE "pmc551: Invalid aperture size [%d]\n", asize); + if (asize) { + asize = (1 << (ffs(asize) - 1)) << 20; + if (asize > (1 << 30)) { + printk(KERN_NOTICE "pmc551: Invalid aperture size " + "[%d]\n", asize); return -EINVAL; } } - printk(KERN_INFO PMC551_VERSION); - - /* - * PCU-bus chipset probe. - */ - for( count = 0; count < MAX_MTD_DEVICES; count++ ) { - - if ((PCI_Device = pci_get_device(PCI_VENDOR_ID_V3_SEMI, - PCI_DEVICE_ID_V3_SEMI_V370PDC, - PCI_Device ) ) == NULL) { - break; - } - - printk(KERN_NOTICE "pmc551: Found PCI V370PDC at 0x%llx\n", - (unsigned long long)PCI_Device->resource[0].start); - - /* - * The PMC551 device acts VERY weird if you don't init it - * first. i.e. it will not correctly report devsel. If for - * some reason the sdram is in a wrote-protected state the - * device will DEVSEL when it is written to causing problems - * with the oldproc.c driver in - * some kernels (2.2.*) - */ - if((length = fixup_pmc551(PCI_Device)) <= 0) { - printk(KERN_NOTICE "pmc551: Cannot init SDRAM\n"); - break; - } + printk(KERN_INFO PMC551_VERSION); + + /* + * PCU-bus chipset probe. + */ + for (count = 0; count < MAX_MTD_DEVICES; count++) { + + if ((PCI_Device = pci_get_device(PCI_VENDOR_ID_V3_SEMI, + PCI_DEVICE_ID_V3_SEMI_V370PDC, + PCI_Device)) == NULL) { + break; + } + + printk(KERN_NOTICE "pmc551: Found PCI V370PDC at 0x%llx\n", + (unsigned long long)PCI_Device->resource[0].start); + + /* + * The PMC551 device acts VERY weird if you don't init it + * first. i.e. it will not correctly report devsel. If for + * some reason the sdram is in a wrote-protected state the + * device will DEVSEL when it is written to causing problems + * with the oldproc.c driver in + * some kernels (2.2.*) + */ + if ((length = fixup_pmc551(PCI_Device)) <= 0) { + printk(KERN_NOTICE "pmc551: Cannot init SDRAM\n"); + break; + } /* * This is needed until the driver is capable of reading the * onboard I2C SROM to discover the "real" memory size. */ - if(msize) { + if (msize) { length = msize; - printk(KERN_NOTICE "pmc551: Using specified memory size 0x%x\n", length); + printk(KERN_NOTICE "pmc551: Using specified memory " + "size 0x%x\n", length); } else { msize = length; } - mtd = kmalloc(sizeof(struct mtd_info), GFP_KERNEL); - if (!mtd) { - printk(KERN_NOTICE "pmc551: Cannot allocate new MTD device.\n"); - break; - } - - memset(mtd, 0, sizeof(struct mtd_info)); - - priv = kmalloc (sizeof(struct mypriv), GFP_KERNEL); - if (!priv) { - printk(KERN_NOTICE "pmc551: Cannot allocate new MTD device.\n"); - kfree(mtd); - break; - } - memset(priv, 0, sizeof(*priv)); - mtd->priv = priv; - priv->dev = PCI_Device; - - if(asize > length) { - printk(KERN_NOTICE "pmc551: reducing aperture size to fit %dM\n",length>>20); + mtd = kmalloc(sizeof(struct mtd_info), GFP_KERNEL); + if (!mtd) { + printk(KERN_NOTICE "pmc551: Cannot allocate new MTD " + "device.\n"); + break; + } + + memset(mtd, 0, sizeof(struct mtd_info)); + + priv = kmalloc(sizeof(struct mypriv), GFP_KERNEL); + if (!priv) { + printk(KERN_NOTICE "pmc551: Cannot allocate new MTD " + "device.\n"); + kfree(mtd); + break; + } + memset(priv, 0, sizeof(*priv)); + mtd->priv = priv; + priv->dev = PCI_Device; + + if (asize > length) { + printk(KERN_NOTICE "pmc551: reducing aperture size to " + "fit %dM\n", length >> 20); priv->asize = asize = length; } else if (asize == 0 || asize == length) { - printk(KERN_NOTICE "pmc551: Using existing aperture size %dM\n", length>>20); + printk(KERN_NOTICE "pmc551: Using existing aperture " + "size %dM\n", length >> 20); priv->asize = asize = length; } else { - printk(KERN_NOTICE "pmc551: Using specified aperture size %dM\n", asize>>20); + printk(KERN_NOTICE "pmc551: Using specified aperture " + "size %dM\n", asize >> 20); priv->asize = asize; } - priv->start = ioremap(((PCI_Device->resource[0].start) - & PCI_BASE_ADDRESS_MEM_MASK), - priv->asize); + priv->start = ioremap(((PCI_Device->resource[0].start) + & PCI_BASE_ADDRESS_MEM_MASK), + priv->asize); if (!priv->start) { printk(KERN_NOTICE "pmc551: Unable to map IO space\n"); - kfree(mtd->priv); - kfree(mtd); + kfree(mtd->priv); + kfree(mtd); break; } - #ifdef CONFIG_MTD_PMC551_DEBUG - printk( KERN_DEBUG "pmc551: setting aperture to %d\n", - ffs(priv->asize>>20)-1); + printk(KERN_DEBUG "pmc551: setting aperture to %d\n", + ffs(priv->asize >> 20) - 1); #endif - priv->base_map0 = ( PMC551_PCI_MEM_MAP_REG_EN - | PMC551_PCI_MEM_MAP_ENABLE - | (ffs(priv->asize>>20)-1)<<4 ); - priv->curr_map0 = priv->base_map0; - pci_write_config_dword ( priv->dev, PMC551_PCI_MEM_MAP0, - priv->curr_map0 ); + priv->base_map0 = (PMC551_PCI_MEM_MAP_REG_EN + | PMC551_PCI_MEM_MAP_ENABLE + | (ffs(priv->asize >> 20) - 1) << 4); + priv->curr_map0 = priv->base_map0; + pci_write_config_dword(priv->dev, PMC551_PCI_MEM_MAP0, + priv->curr_map0); #ifdef CONFIG_MTD_PMC551_DEBUG - printk( KERN_DEBUG "pmc551: aperture set to %d\n", - (priv->base_map0 & 0xF0)>>4 ); + printk(KERN_DEBUG "pmc551: aperture set to %d\n", + (priv->base_map0 & 0xF0) >> 4); #endif - mtd->size = msize; - mtd->flags = MTD_CAP_RAM; - mtd->erase = pmc551_erase; - mtd->read = pmc551_read; - mtd->write = pmc551_write; - mtd->point = pmc551_point; - mtd->unpoint = pmc551_unpoint; - mtd->type = MTD_RAM; - mtd->name = "PMC551 RAM board"; - mtd->erasesize = 0x10000; - mtd->writesize = 1; - mtd->owner = THIS_MODULE; - - if (add_mtd_device(mtd)) { - printk(KERN_NOTICE "pmc551: Failed to register new device\n"); + mtd->size = msize; + mtd->flags = MTD_CAP_RAM; + mtd->erase = pmc551_erase; + mtd->read = pmc551_read; + mtd->write = pmc551_write; + mtd->point = pmc551_point; + mtd->unpoint = pmc551_unpoint; + mtd->type = MTD_RAM; + mtd->name = "PMC551 RAM board"; + mtd->erasesize = 0x10000; + mtd->writesize = 1; + mtd->owner = THIS_MODULE; + + if (add_mtd_device(mtd)) { + printk(KERN_NOTICE "pmc551: Failed to register new " + "device\n"); iounmap(priv->start); - kfree(mtd->priv); - kfree(mtd); - break; - } - - /* Keep a reference as the add_mtd_device worked */ - pci_dev_get(PCI_Device); - - printk(KERN_NOTICE "Registered pmc551 memory device.\n"); - printk(KERN_NOTICE "Mapped %dM of memory from 0x%p to 0x%p\n", - priv->asize>>20, - priv->start, - priv->start + priv->asize); - printk(KERN_NOTICE "Total memory is %d%c\n", - (length<1024)?length: - (length<1048576)?length>>10:length>>20, - (length<1024)?'B':(length<1048576)?'K':'M'); + kfree(mtd->priv); + kfree(mtd); + break; + } + + /* Keep a reference as the add_mtd_device worked */ + pci_dev_get(PCI_Device); + + printk(KERN_NOTICE "Registered pmc551 memory device.\n"); + printk(KERN_NOTICE "Mapped %dM of memory from 0x%p to 0x%p\n", + priv->asize >> 20, + priv->start, priv->start + priv->asize); + printk(KERN_NOTICE "Total memory is %d%c\n", + (length < 1024) ? length : + (length < 1048576) ? length >> 10 : length >> 20, + (length < 1024) ? 'B' : (length < 1048576) ? 'K' : 'M'); priv->nextpmc551 = pmc551list; pmc551list = mtd; found++; - } + } - /* Exited early, reference left over */ - if (PCI_Device) - pci_dev_put(PCI_Device); + /* Exited early, reference left over */ + if (PCI_Device) + pci_dev_put(PCI_Device); - if( !pmc551list ) { - printk(KERN_NOTICE "pmc551: not detected\n"); - return -ENODEV; - } else { + if (!pmc551list) { + printk(KERN_NOTICE "pmc551: not detected\n"); + return -ENODEV; + } else { printk(KERN_NOTICE "pmc551: %d pmc551 devices loaded\n", found); - return 0; + return 0; } } @@ -819,24 +848,24 @@ static int __init init_pmc551(void) */ static void __exit cleanup_pmc551(void) { - int found=0; - struct mtd_info *mtd; + int found = 0; + struct mtd_info *mtd; struct mypriv *priv; - while((mtd=pmc551list)) { + while ((mtd = pmc551list)) { priv = mtd->priv; pmc551list = priv->nextpmc551; - if(priv->start) { - printk (KERN_DEBUG "pmc551: unmapping %dM starting at 0x%p\n", - priv->asize>>20, priv->start); - iounmap (priv->start); + if (priv->start) { + printk(KERN_DEBUG "pmc551: unmapping %dM starting at " + "0x%p\n", priv->asize >> 20, priv->start); + iounmap(priv->start); } pci_dev_put(priv->dev); - kfree (mtd->priv); - del_mtd_device (mtd); - kfree (mtd); + kfree(mtd->priv); + del_mtd_device(mtd); + kfree(mtd); found++; } |