aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-at91/board-at572d940hf_ek.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-at91/board-at572d940hf_ek.c')
-rw-r--r--arch/arm/mach-at91/board-at572d940hf_ek.c326
1 files changed, 0 insertions, 326 deletions
diff --git a/arch/arm/mach-at91/board-at572d940hf_ek.c b/arch/arm/mach-at91/board-at572d940hf_ek.c
deleted file mode 100644
index 3929f1c..0000000
--- a/arch/arm/mach-at91/board-at572d940hf_ek.c
+++ /dev/null
@@ -1,326 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-at572d940hf_ek.c
- *
- * Copyright (C) 2008 Atmel Antonio R. Costa <costa.antonior@gmail.com>
- * Copyright (C) 2005 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ds1305.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/board.h>
-#include <mach/gpio.h>
-#include <mach/at91sam9_smc.h>
-
-#include "sam9_smc.h"
-#include "generic.h"
-
-
-static void __init eb_map_io(void)
-{
- /* Initialize processor: 12.500 MHz crystal */
- at572d940hf_initialize(12000000);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx & Tx only) */
- at91_register_uart(AT572D940HF_ID_US0, 1, 0);
-
- /* USART1 on ttyS2. (Rx & Tx only) */
- at91_register_uart(AT572D940HF_ID_US1, 2, 0);
-
- /* USART2 on ttyS3. (Tx & Rx only */
- at91_register_uart(AT572D940HF_ID_US2, 3, 0);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
-}
-
-static void __init eb_init_irq(void)
-{
- at572d940hf_init_interrupts(NULL);
-}
-
-
-/*
- * USB Host Port
- */
-static struct at91_usbh_data __initdata eb_usbh_data = {
- .ports = 2,
-};
-
-
-/*
- * USB Device Port
- */
-static struct at91_udc_data __initdata eb_udc_data = {
- .vbus_pin = 0, /* no VBUS detection,UDC always on */
- .pullup_pin = 0, /* pull-up driven by UDC */
-};
-
-
-/*
- * MCI (SD/MMC)
- */
-static struct at91_mmc_data __initdata eb_mmc_data = {
- .wire4 = 1,
-/* .det_pin = ... not connected */
-/* .wp_pin = ... not connected */
-/* .vcc_pin = ... not connected */
-};
-
-
-/*
- * MACB Ethernet device
- */
-static struct at91_eth_data __initdata eb_eth_data = {
- .phy_irq_pin = AT91_PIN_PB25,
- .is_rmii = 1,
-};
-
-/*
- * NOR flash
- */
-
-static struct mtd_partition eb_nor_partitions[] = {
- {
- .name = "Raw Environment",
- .offset = 0,
- .size = SZ_4M,
- .mask_flags = 0,
- },
- {
- .name = "OS FS",
- .offset = MTDPART_OFS_APPEND,
- .size = 3 * SZ_1M,
- .mask_flags = 0,
- },
- {
- .name = "APP FS",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- .mask_flags = 0,
- },
-};
-
-static void nor_flash_set_vpp(struct map_info* mi, int i) {
-};
-
-static struct physmap_flash_data nor_flash_data = {
- .width = 4,
- .parts = eb_nor_partitions,
- .nr_parts = ARRAY_SIZE(eb_nor_partitions),
- .set_vpp = nor_flash_set_vpp,
-};
-
-static struct resource nor_flash_resources[] = {
- {
- .start = AT91_CHIPSELECT_0,
- .end = AT91_CHIPSELECT_0 + SZ_16M - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device nor_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &nor_flash_data,
- },
- .resource = nor_flash_resources,
- .num_resources = ARRAY_SIZE(nor_flash_resources),
-};
-
-static struct sam9_smc_config __initdata eb_nor_smc_config = {
- .ncs_read_setup = 1,
- .nrd_setup = 1,
- .ncs_write_setup = 1,
- .nwe_setup = 1,
-
- .ncs_read_pulse = 7,
- .nrd_pulse = 7,
- .ncs_write_pulse = 7,
- .nwe_pulse = 7,
-
- .read_cycle = 9,
- .write_cycle = 9,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | AT91_SMC_DBW_32,
- .tdf_cycles = 1,
-};
-
-static void __init eb_add_device_nor(void)
-{
- /* configure chip-select 0 (NOR) */
- sam9_smc_configure(0, &eb_nor_smc_config);
- platform_device_register(&nor_flash);
-}
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata eb_nand_partition[] = {
- {
- .name = "Partition 1",
- .offset = 0,
- .size = SZ_16M,
- },
- {
- .name = "Partition 2",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL,
- }
-};
-
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(eb_nand_partition);
- return eb_nand_partition;
-}
-
-static struct atmel_nand_data __initdata eb_nand_data = {
- .ale = 22,
- .cle = 21,
-/* .det_pin = ... not connected */
-/* .rdy_pin = AT91_PIN_PC16, */
- .enable_pin = AT91_PIN_PA15,
- .partition_info = nand_partitions,
-#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
- .bus_width_16 = 1,
-#else
- .bus_width_16 = 0,
-#endif
-};
-
-static struct sam9_smc_config __initdata eb_nand_smc_config = {
- .ncs_read_setup = 0,
- .nrd_setup = 0,
- .ncs_write_setup = 1,
- .nwe_setup = 1,
-
- .ncs_read_pulse = 3,
- .nrd_pulse = 3,
- .ncs_write_pulse = 3,
- .nwe_pulse = 3,
-
- .read_cycle = 5,
- .write_cycle = 5,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
- .tdf_cycles = 12,
-};
-
-static void __init eb_add_device_nand(void)
-{
- /* setup bus-width (8 or 16) */
- if (eb_nand_data.bus_width_16)
- eb_nand_smc_config.mode |= AT91_SMC_DBW_16;
- else
- eb_nand_smc_config.mode |= AT91_SMC_DBW_8;
-
- /* configure chip-select 3 (NAND) */
- sam9_smc_configure(3, &eb_nand_smc_config);
-
- at91_add_device_nand(&eb_nand_data);
-}
-
-
-/*
- * SPI devices
- */
-static struct resource rtc_resources[] = {
- [0] = {
- .start = AT572D940HF_ID_IRQ1,
- .end = AT572D940HF_ID_IRQ1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct ds1305_platform_data ds1306_data = {
- .is_ds1306 = true,
- .en_1hz = false,
-};
-
-static struct spi_board_info eb_spi_devices[] = {
- { /* RTC Dallas DS1306 */
- .modalias = "rtc-ds1305",
- .chip_select = 3,
- .mode = SPI_CS_HIGH | SPI_CPOL | SPI_CPHA,
- .max_speed_hz = 500000,
- .bus_num = 0,
- .irq = AT572D940HF_ID_IRQ1,
- .platform_data = (void *) &ds1306_data,
- },
-#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
- { /* Dataflash card */
- .modalias = "mtd_dataflash",
- .chip_select = 0,
- .max_speed_hz = 15 * 1000 * 1000,
- .bus_num = 0,
- },
-#endif
-};
-
-static void __init eb_board_init(void)
-{
- /* Serial */
- at91_add_device_serial();
- /* USB Host */
- at91_add_device_usbh(&eb_usbh_data);
- /* USB Device */
- at91_add_device_udc(&eb_udc_data);
- /* I2C */
- at91_add_device_i2c(NULL, 0);
- /* NOR */
- eb_add_device_nor();
- /* NAND */
- eb_add_device_nand();
- /* SPI */
- at91_add_device_spi(eb_spi_devices, ARRAY_SIZE(eb_spi_devices));
- /* MMC */
- at91_add_device_mmc(0, &eb_mmc_data);
- /* Ethernet */
- at91_add_device_eth(&eb_eth_data);
- /* mAgic */
- at91_add_device_mAgic();
-}
-
-MACHINE_START(AT572D940HFEB, "Atmel AT91D940HF-EB")
- /* Maintainer: Atmel <costa.antonior@gmail.com> */
- .boot_params = AT91_SDRAM_BASE + 0x100,
- .timer = &at91sam926x_timer,
- .map_io = eb_map_io,
- .init_irq = eb_init_irq,
- .init_machine = eb_board_init,
-MACHINE_END