1 files changed, 149 insertions, 0 deletions
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
new file mode 100644
index 0000000..562168f
--- /dev/null
+++ b/arch/arm/mach-omap2/pm.c
@@ -0,0 +1,149 @@
+/*
+ * linux/arch/arm/mach-omap2/pm.c
+ *
+ * OMAP2 Power Management Routines
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ * Tony Lindgren <tony@atomide.com>
+ *
+ * Copyright (C) 2005 Texas Instruments, Inc.
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * Based on pm.c for omap1
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/pm.h>
+#include <linux/sched.h>
+#include <linux/proc_fs.h>
+#include <linux/pm.h>
+#include <linux/interrupt.h>
+#include <linux/sysfs.h>
+#include <linux/module.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/atomic.h>
+#include <asm/mach/time.h>
+#include <asm/mach/irq.h>
+#include <asm/mach-types.h>
+
+#include <asm/arch/irqs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sram.h>
+#include <asm/arch/pm.h>
+
+static struct clk *vclk;
+static void (*omap2_sram_idle)(void);
+static void (*omap2_sram_suspend)(int dllctrl, int cpu_rev);
+static void (*saved_idle)(void);
+
+void omap2_pm_idle(void)
+{
+	local_irq_disable();
+	local_fiq_disable();
+	if (need_resched()) {
+		local_fiq_enable();
+		local_irq_enable();
+		return;
+	}
+
+	/*
+	 * Since an interrupt may set up a timer, we don't want to
+	 * reprogram the hardware timer with interrupts enabled.
+	 * Re-enable interrupts only after returning from idle.
+	 */
+	timer_dyn_reprogram();
+
+	omap2_sram_idle();
+	local_fiq_enable();
+	local_irq_enable();
+}
+
+static int omap2_pm_prepare(suspend_state_t state)
+{
+	int error = 0;
+
+	/* We cannot sleep in idle until we have resumed */
+	saved_idle = pm_idle;
+	pm_idle = NULL;
+
+	switch (state)
+	{
+	case PM_SUSPEND_STANDBY:
+	case PM_SUSPEND_MEM:
+		break;
+
+	case PM_SUSPEND_DISK:
+		return -ENOTSUPP;
+
+	default:
+		return -EINVAL;
+	}
+
+	return error;
+}
+
+static int omap2_pm_enter(suspend_state_t state)
+{
+	switch (state)
+	{
+	case PM_SUSPEND_STANDBY:
+	case PM_SUSPEND_MEM:
+		/* FIXME: Add suspend */
+		break;
+
+	case PM_SUSPEND_DISK:
+		return -ENOTSUPP;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int omap2_pm_finish(suspend_state_t state)
+{
+	pm_idle = saved_idle;
+	return 0;
+}
+
+static struct pm_ops omap_pm_ops = {
+	.pm_disk_mode	= 0,
+	.prepare	= omap2_pm_prepare,
+	.enter		= omap2_pm_enter,
+	.finish		= omap2_pm_finish,
+};
+
+int __init omap2_pm_init(void)
+{
+	printk("Power Management for TI OMAP.\n");
+
+	vclk = clk_get(NULL, "virt_prcm_set");
+	if (IS_ERR(vclk)) {
+		printk(KERN_ERR "Could not get PM vclk\n");
+		return -ENODEV;
+	}
+
+	/*
+	 * We copy the assembler sleep/wakeup routines to SRAM.
+	 * These routines need to be in SRAM as that's the only
+	 * memory the MPU can see when it wakes up.
+	 */
+	omap2_sram_idle = omap_sram_push(omap24xx_idle_loop_suspend,
+					 omap24xx_idle_loop_suspend_sz);
+
+	omap2_sram_suspend = omap_sram_push(omap24xx_cpu_suspend,
+					    omap24xx_cpu_suspend_sz);
+
+	pm_set_ops(&omap_pm_ops);
+	pm_idle = omap2_pm_idle;
+
+	return 0;
+}
+
+__initcall(omap2_pm_init);