diff options
Diffstat (limited to 'arch/arm/mach-pxa/e800.c')
| -rw-r--r-- | arch/arm/mach-pxa/e800.c | 229 |
1 files changed, 0 insertions, 229 deletions
diff --git a/arch/arm/mach-pxa/e800.c b/arch/arm/mach-pxa/e800.c deleted file mode 100644 index 8ea97bf..0000000 --- a/arch/arm/mach-pxa/e800.c +++ /dev/null @@ -1,229 +0,0 @@ -/* - * Hardware definitions for the Toshiba eseries PDAs - * - * Copyright (c) 2003 Ian Molton <spyro@f2s.com> - * - * This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - * - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/device.h> -#include <linux/platform_device.h> -#include <linux/fb.h> -#include <linux/mfd/tc6393xb.h> - -#include <video/w100fb.h> - -#include <asm/setup.h> -#include <asm/mach/arch.h> -#include <asm/mach-types.h> - -#include <mach/pxa25x.h> -#include <mach/eseries-gpio.h> -#include <mach/udc.h> -#include <mach/irqs.h> -#include <mach/audio.h> - -#include "generic.h" -#include "eseries.h" -#include "clock.h" - -/* ------------------------ e800 LCD definitions ------------------------- */ - -static unsigned long e800_pin_config[] __initdata = { - /* AC97 */ - GPIO28_AC97_BITCLK, - GPIO29_AC97_SDATA_IN_0, - GPIO30_AC97_SDATA_OUT, - GPIO31_AC97_SYNC, -}; - -static struct w100_gen_regs e800_lcd_regs = { - .lcd_format = 0x00008003, - .lcdd_cntl1 = 0x02a00000, - .lcdd_cntl2 = 0x0003ffff, - .genlcd_cntl1 = 0x000ff2a3, - .genlcd_cntl2 = 0x000002a3, - .genlcd_cntl3 = 0x000102aa, -}; - -static struct w100_mode e800_lcd_mode[2] = { - [0] = { - .xres = 480, - .yres = 640, - .left_margin = 52, - .right_margin = 148, - .upper_margin = 2, - .lower_margin = 6, - .crtc_ss = 0x80350034, - .crtc_ls = 0x802b0026, - .crtc_gs = 0x80160016, - .crtc_vpos_gs = 0x00020003, - .crtc_rev = 0x0040001d, - .crtc_dclk = 0xe0000000, - .crtc_gclk = 0x82a50049, - .crtc_goe = 0x80ee001c, - .crtc_ps1_active = 0x00000000, - .pll_freq = 128, - .pixclk_divider = 4, - .pixclk_divider_rotated = 6, - .pixclk_src = CLK_SRC_PLL, - .sysclk_divider = 0, - .sysclk_src = CLK_SRC_PLL, - }, - [1] = { - .xres = 240, - .yres = 320, - .left_margin = 15, - .right_margin = 88, - .upper_margin = 0, - .lower_margin = 7, - .crtc_ss = 0xd010000f, - .crtc_ls = 0x80070003, - .crtc_gs = 0x80000000, - .crtc_vpos_gs = 0x01460147, - .crtc_rev = 0x00400003, - .crtc_dclk = 0xa1700030, - .crtc_gclk = 0x814b0008, - .crtc_goe = 0x80cc0015, - .crtc_ps1_active = 0x00000000, - .pll_freq = 100, - .pixclk_divider = 6, /* Wince uses 14 which gives a */ - .pixclk_divider_rotated = 6, /* 7MHz Pclk. We use a 14MHz one */ - .pixclk_src = CLK_SRC_PLL, - .sysclk_divider = 0, - .sysclk_src = CLK_SRC_PLL, - } -}; - - -static struct w100_gpio_regs e800_w100_gpio_info = { - .init_data1 = 0xc13fc019, - .gpio_dir1 = 0x3e40df7f, - .gpio_oe1 = 0x003c3000, - .init_data2 = 0x00000000, - .gpio_dir2 = 0x00000000, - .gpio_oe2 = 0x00000000, -}; - -static struct w100_mem_info e800_w100_mem_info = { - .ext_cntl = 0x09640011, - .sdram_mode_reg = 0x00600021, - .ext_timing_cntl = 0x10001545, - .io_cntl = 0x7ddd7333, - .size = 0x1fffff, -}; - -static void e800_tg_change(struct w100fb_par *par) -{ - unsigned long tmp; - - tmp = w100fb_gpio_read(W100_GPIO_PORT_A); - if (par->mode->xres == 480) - tmp |= 0x100; - else - tmp &= ~0x100; - w100fb_gpio_write(W100_GPIO_PORT_A, tmp); -} - -static struct w100_tg_info e800_tg_info = { - .change = e800_tg_change, -}; - -static struct w100fb_mach_info e800_fb_info = { - .modelist = e800_lcd_mode, - .num_modes = 2, - .regs = &e800_lcd_regs, - .gpio = &e800_w100_gpio_info, - .mem = &e800_w100_mem_info, - .tg = &e800_tg_info, - .xtal_freq = 16000000, -}; - -static struct resource e800_fb_resources[] = { - [0] = { - .start = 0x0c000000, - .end = 0x0cffffff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device e800_fb_device = { - .name = "w100fb", - .id = -1, - .dev = { - .platform_data = &e800_fb_info, - }, - .num_resources = ARRAY_SIZE(e800_fb_resources), - .resource = e800_fb_resources, -}; - -/* --------------------------- UDC definitions --------------------------- */ - -static struct pxa2xx_udc_mach_info e800_udc_mach_info = { - .gpio_vbus = GPIO_E800_USB_DISC, - .gpio_pullup = GPIO_E800_USB_PULLUP, - .gpio_pullup_inverted = 1 -}; - -/* ----------------- e800 tc6393xb parameters ------------------ */ - -static struct tc6393xb_platform_data e800_tc6393xb_info = { - .irq_base = IRQ_BOARD_START, - .scr_pll2cr = 0x0cc1, - .scr_gper = 0, - .gpio_base = -1, - .suspend = &eseries_tmio_suspend, - .resume = &eseries_tmio_resume, - .enable = &eseries_tmio_enable, - .disable = &eseries_tmio_disable, -}; - -static struct platform_device e800_tc6393xb_device = { - .name = "tc6393xb", - .id = -1, - .dev = { - .platform_data = &e800_tc6393xb_info, - }, - .num_resources = 2, - .resource = eseries_tmio_resources, -}; - -/* ----------------------------------------------------------------------- */ - -static struct platform_device *devices[] __initdata = { - &e800_fb_device, - &e800_tc6393xb_device, -}; - -static void __init e800_init(void) -{ - pxa2xx_mfp_config(ARRAY_AND_SIZE(e800_pin_config)); - pxa_set_ffuart_info(NULL); - pxa_set_btuart_info(NULL); - pxa_set_stuart_info(NULL); - clk_add_alias("CLK_CK3P6MI", e800_tc6393xb_device.name, - "GPIO11_CLK", NULL), - eseries_get_tmio_gpios(); - platform_add_devices(devices, ARRAY_SIZE(devices)); - pxa_set_udc_info(&e800_udc_mach_info); - pxa_set_ac97_info(NULL); -} - -MACHINE_START(E800, "Toshiba e800") - /* Maintainer: Ian Molton (spyro@f2s.com) */ - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, - .boot_params = 0xa0000100, - .map_io = pxa_map_io, - .init_irq = pxa25x_init_irq, - .fixup = eseries_fixup, - .init_machine = e800_init, - .timer = &pxa_timer, -MACHINE_END - |