1 files changed, 232 insertions, 0 deletions
diff --git a/arch/cris/kernel/time.c b/arch/cris/kernel/time.c
new file mode 100644
index 0000000..6c28b0e
--- /dev/null
+++ b/arch/cris/kernel/time.c
@@ -0,0 +1,232 @@
+/* $Id: time.c,v 1.14 2004/06/01 05:38:11 starvik Exp $
+ *
+ *  linux/arch/cris/kernel/time.c
+ *
+ *  Copyright (C) 1991, 1992, 1995  Linus Torvalds
+ *  Copyright (C) 1999, 2000, 2001 Axis Communications AB
+ *
+ * 1994-07-02    Alan Modra
+ *	fixed set_rtc_mmss, fixed time.year for >= 2000, new mktime
+ * 1995-03-26    Markus Kuhn
+ *      fixed 500 ms bug at call to set_rtc_mmss, fixed DS12887
+ *      precision CMOS clock update
+ * 1996-05-03    Ingo Molnar
+ *      fixed time warps in do_[slow|fast]_gettimeoffset()
+ * 1997-09-10	Updated NTP code according to technical memorandum Jan '96
+ *		"A Kernel Model for Precision Timekeeping" by Dave Mills
+ *
+ * Linux/CRIS specific code:
+ *
+ * Authors:    Bjorn Wesen
+ *             Johan Adolfsson  
+ *
+ */
+
+#include <asm/rtc.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/param.h>
+#include <linux/jiffies.h>
+#include <linux/bcd.h>
+#include <linux/timex.h>
+#include <linux/init.h>
+
+u64 jiffies_64 = INITIAL_JIFFIES;
+
+EXPORT_SYMBOL(jiffies_64);
+
+int have_rtc;  /* used to remember if we have an RTC or not */;
+
+#define TICK_SIZE tick
+
+extern unsigned long wall_jiffies;
+extern unsigned long loops_per_jiffy; /* init/main.c */
+unsigned long loops_per_usec;
+
+extern unsigned long do_slow_gettimeoffset(void);
+static unsigned long (*do_gettimeoffset)(void) = do_slow_gettimeoffset;
+
+/*
+ * This version of gettimeofday has near microsecond resolution.
+ *
+ * Note: Division is quite slow on CRIS and do_gettimeofday is called
+ *       rather often. Maybe we should do some kind of approximation here
+ *       (a naive approximation would be to divide by 1024).
+ */
+void do_gettimeofday(struct timeval *tv)
+{
+	unsigned long flags;
+	signed long usec, sec;
+	local_irq_save(flags);
+	local_irq_disable();
+	usec = do_gettimeoffset();
+	{
+		unsigned long lost = jiffies - wall_jiffies;
+		if (lost)
+			usec += lost * (1000000 / HZ);
+	}
+
+        /*
+	 * If time_adjust is negative then NTP is slowing the clock
+	 * so make sure not to go into next possible interval.
+	 * Better to lose some accuracy than have time go backwards..
+	 */
+	if (unlikely(time_adjust < 0) && usec > tickadj)
+		usec = tickadj;
+
+	sec = xtime.tv_sec;
+	usec += xtime.tv_nsec / 1000;
+	local_irq_restore(flags);
+
+	while (usec >= 1000000) {
+		usec -= 1000000;
+		sec++;
+	}
+
+	tv->tv_sec = sec;
+	tv->tv_usec = usec;
+}
+
+EXPORT_SYMBOL(do_gettimeofday);
+
+int do_settimeofday(struct timespec *tv)
+{
+	time_t wtm_sec, sec = tv->tv_sec;
+	long wtm_nsec, nsec = tv->tv_nsec;
+
+	if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
+		return -EINVAL;
+
+	write_seqlock_irq(&xtime_lock);
+	/*
+	 * This is revolting. We need to set "xtime" correctly. However, the
+	 * value in this location is the value at the most recent update of
+	 * wall time.  Discover what correction gettimeofday() would have
+	 * made, and then undo it!
+	 */
+	nsec -= do_gettimeoffset() * NSEC_PER_USEC;
+	nsec -= (jiffies - wall_jiffies) * TICK_NSEC;
+
+	wtm_sec  = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
+	wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
+
+	set_normalized_timespec(&xtime, sec, nsec);
+	set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
+
+	time_adjust = 0;		/* stop active adjtime() */
+	time_status |= STA_UNSYNC;
+	time_maxerror = NTP_PHASE_LIMIT;
+	time_esterror = NTP_PHASE_LIMIT;
+	write_sequnlock_irq(&xtime_lock);
+	clock_was_set();
+	return 0;
+}
+
+EXPORT_SYMBOL(do_settimeofday);
+
+
+/*
+ * BUG: This routine does not handle hour overflow properly; it just
+ *      sets the minutes. Usually you'll only notice that after reboot!
+ */
+
+int set_rtc_mmss(unsigned long nowtime)
+{
+	int retval = 0;
+	int real_seconds, real_minutes, cmos_minutes;
+
+	printk(KERN_DEBUG "set_rtc_mmss(%lu)\n", nowtime);
+
+	if(!have_rtc)
+		return 0;
+
+	cmos_minutes = CMOS_READ(RTC_MINUTES);
+	BCD_TO_BIN(cmos_minutes);
+
+	/*
+	 * since we're only adjusting minutes and seconds,
+	 * don't interfere with hour overflow. This avoids
+	 * messing with unknown time zones but requires your
+	 * RTC not to be off by more than 15 minutes
+	 */
+	real_seconds = nowtime % 60;
+	real_minutes = nowtime / 60;
+	if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
+		real_minutes += 30;		/* correct for half hour time zone */
+	real_minutes %= 60;
+
+	if (abs(real_minutes - cmos_minutes) < 30) {
+		BIN_TO_BCD(real_seconds);
+		BIN_TO_BCD(real_minutes);
+		CMOS_WRITE(real_seconds,RTC_SECONDS);
+		CMOS_WRITE(real_minutes,RTC_MINUTES);
+	} else {
+		printk(KERN_WARNING
+		       "set_rtc_mmss: can't update from %d to %d\n",
+		       cmos_minutes, real_minutes);
+		retval = -1;
+	}
+
+	return retval;
+}
+
+/* grab the time from the RTC chip */
+
+unsigned long
+get_cmos_time(void)
+{
+	unsigned int year, mon, day, hour, min, sec;
+
+	sec = CMOS_READ(RTC_SECONDS);
+	min = CMOS_READ(RTC_MINUTES);
+	hour = CMOS_READ(RTC_HOURS);
+	day = CMOS_READ(RTC_DAY_OF_MONTH);
+	mon = CMOS_READ(RTC_MONTH);
+	year = CMOS_READ(RTC_YEAR);
+
+	printk(KERN_DEBUG
+	       "rtc: sec 0x%x min 0x%x hour 0x%x day 0x%x mon 0x%x year 0x%x\n",
+	       sec, min, hour, day, mon, year);
+
+	BCD_TO_BIN(sec);
+	BCD_TO_BIN(min);
+	BCD_TO_BIN(hour);
+	BCD_TO_BIN(day);
+	BCD_TO_BIN(mon);
+	BCD_TO_BIN(year);
+
+	if ((year += 1900) < 1970)
+		year += 100;
+
+	return mktime(year, mon, day, hour, min, sec);
+}
+
+/* update xtime from the CMOS settings. used when /dev/rtc gets a SET_TIME.
+ * TODO: this doesn't reset the fancy NTP phase stuff as do_settimeofday does.
+ */
+
+void
+update_xtime_from_cmos(void)
+{
+	if(have_rtc) {
+		xtime.tv_sec = get_cmos_time();
+		xtime.tv_nsec = 0;
+	}
+}
+
+/*
+ * Scheduler clock - returns current time in nanosec units.
+ */
+unsigned long long sched_clock(void)
+{
+	return (unsigned long long)jiffies * (1000000000 / HZ);
+}
+
+static int
+__init init_udelay(void)
+{
+	loops_per_usec = (loops_per_jiffy * HZ) / 1000000;
+	return 0;
+}
+
+__initcall(init_udelay);