diff options
Diffstat (limited to 'arch/mips/pci/ops-bcm63xx.c')
| -rw-r--r-- | arch/mips/pci/ops-bcm63xx.c | 467 |
1 files changed, 467 insertions, 0 deletions
diff --git a/arch/mips/pci/ops-bcm63xx.c b/arch/mips/pci/ops-bcm63xx.c new file mode 100644 index 0000000..822ae17 --- /dev/null +++ b/arch/mips/pci/ops-bcm63xx.c @@ -0,0 +1,467 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> + */ + +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/io.h> + +#include "pci-bcm63xx.h" + +/* + * swizzle 32bits data to return only the needed part + */ +static int postprocess_read(u32 data, int where, unsigned int size) +{ + u32 ret; + + ret = 0; + switch (size) { + case 1: + ret = (data >> ((where & 3) << 3)) & 0xff; + break; + case 2: + ret = (data >> ((where & 3) << 3)) & 0xffff; + break; + case 4: + ret = data; + break; + } + return ret; +} + +static int preprocess_write(u32 orig_data, u32 val, int where, + unsigned int size) +{ + u32 ret; + + ret = 0; + switch (size) { + case 1: + ret = (orig_data & ~(0xff << ((where & 3) << 3))) | + (val << ((where & 3) << 3)); + break; + case 2: + ret = (orig_data & ~(0xffff << ((where & 3) << 3))) | + (val << ((where & 3) << 3)); + break; + case 4: + ret = val; + break; + } + return ret; +} + +/* + * setup hardware for a configuration cycle with given parameters + */ +static int bcm63xx_setup_cfg_access(int type, unsigned int busn, + unsigned int devfn, int where) +{ + unsigned int slot, func, reg; + u32 val; + + slot = PCI_SLOT(devfn); + func = PCI_FUNC(devfn); + reg = where >> 2; + + /* sanity check */ + if (slot > (MPI_L2PCFG_DEVNUM_MASK >> MPI_L2PCFG_DEVNUM_SHIFT)) + return 1; + + if (func > (MPI_L2PCFG_FUNC_MASK >> MPI_L2PCFG_FUNC_SHIFT)) + return 1; + + if (reg > (MPI_L2PCFG_REG_MASK >> MPI_L2PCFG_REG_SHIFT)) + return 1; + + /* ok, setup config access */ + val = (reg << MPI_L2PCFG_REG_SHIFT); + val |= (func << MPI_L2PCFG_FUNC_SHIFT); + val |= (slot << MPI_L2PCFG_DEVNUM_SHIFT); + val |= MPI_L2PCFG_CFG_USEREG_MASK; + val |= MPI_L2PCFG_CFG_SEL_MASK; + /* type 0 cycle for local bus, type 1 cycle for anything else */ + if (type != 0) { + /* FIXME: how to specify bus ??? */ + val |= (1 << MPI_L2PCFG_CFG_TYPE_SHIFT); + } + bcm_mpi_writel(val, MPI_L2PCFG_REG); + + return 0; +} + +static int bcm63xx_do_cfg_read(int type, unsigned int busn, + unsigned int devfn, int where, int size, + u32 *val) +{ + u32 data; + + /* two phase cycle, first we write address, then read data at + * another location, caller already has a spinlock so no need + * to add one here */ + if (bcm63xx_setup_cfg_access(type, busn, devfn, where)) + return PCIBIOS_DEVICE_NOT_FOUND; + iob(); + data = le32_to_cpu(__raw_readl(pci_iospace_start)); + /* restore IO space normal behaviour */ + bcm_mpi_writel(0, MPI_L2PCFG_REG); + + *val = postprocess_read(data, where, size); + + return PCIBIOS_SUCCESSFUL; +} + +static int bcm63xx_do_cfg_write(int type, unsigned int busn, + unsigned int devfn, int where, int size, + u32 val) +{ + u32 data; + + /* two phase cycle, first we write address, then write data to + * another location, caller already has a spinlock so no need + * to add one here */ + if (bcm63xx_setup_cfg_access(type, busn, devfn, where)) + return PCIBIOS_DEVICE_NOT_FOUND; + iob(); + + data = le32_to_cpu(__raw_readl(pci_iospace_start)); + data = preprocess_write(data, val, where, size); + + __raw_writel(cpu_to_le32(data), pci_iospace_start); + wmb(); + /* no way to know the access is done, we have to wait */ + udelay(500); + /* restore IO space normal behaviour */ + bcm_mpi_writel(0, MPI_L2PCFG_REG); + + return PCIBIOS_SUCCESSFUL; +} + +static int bcm63xx_pci_read(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 *val) +{ + int type; + + type = bus->parent ? 1 : 0; + + if (type == 0 && PCI_SLOT(devfn) == CARDBUS_PCI_IDSEL) + return PCIBIOS_DEVICE_NOT_FOUND; + + return bcm63xx_do_cfg_read(type, bus->number, devfn, + where, size, val); +} + +static int bcm63xx_pci_write(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 val) +{ + int type; + + type = bus->parent ? 1 : 0; + + if (type == 0 && PCI_SLOT(devfn) == CARDBUS_PCI_IDSEL) + return PCIBIOS_DEVICE_NOT_FOUND; + + return bcm63xx_do_cfg_write(type, bus->number, devfn, + where, size, val); +} + +struct pci_ops bcm63xx_pci_ops = { + .read = bcm63xx_pci_read, + .write = bcm63xx_pci_write +}; + +#ifdef CONFIG_CARDBUS +/* + * emulate configuration read access on a cardbus bridge + */ +#define FAKE_CB_BRIDGE_SLOT 0x1e + +static int fake_cb_bridge_bus_number = -1; + +static struct { + u16 pci_command; + u8 cb_latency; + u8 subordinate_busn; + u8 cardbus_busn; + u8 pci_busn; + int bus_assigned; + u16 bridge_control; + + u32 mem_base0; + u32 mem_limit0; + u32 mem_base1; + u32 mem_limit1; + + u32 io_base0; + u32 io_limit0; + u32 io_base1; + u32 io_limit1; +} fake_cb_bridge_regs; + +static int fake_cb_bridge_read(int where, int size, u32 *val) +{ + unsigned int reg; + u32 data; + + data = 0; + reg = where >> 2; + switch (reg) { + case (PCI_VENDOR_ID >> 2): + case (PCI_CB_SUBSYSTEM_VENDOR_ID >> 2): + /* create dummy vendor/device id from our cpu id */ + data = (bcm63xx_get_cpu_id() << 16) | PCI_VENDOR_ID_BROADCOM; + break; + + case (PCI_COMMAND >> 2): + data = (PCI_STATUS_DEVSEL_SLOW << 16); + data |= fake_cb_bridge_regs.pci_command; + break; + + case (PCI_CLASS_REVISION >> 2): + data = (PCI_CLASS_BRIDGE_CARDBUS << 16); + break; + + case (PCI_CACHE_LINE_SIZE >> 2): + data = (PCI_HEADER_TYPE_CARDBUS << 16); + break; + + case (PCI_INTERRUPT_LINE >> 2): + /* bridge control */ + data = (fake_cb_bridge_regs.bridge_control << 16); + /* pin:intA line:0xff */ + data |= (0x1 << 8) | 0xff; + break; + + case (PCI_CB_PRIMARY_BUS >> 2): + data = (fake_cb_bridge_regs.cb_latency << 24); + data |= (fake_cb_bridge_regs.subordinate_busn << 16); + data |= (fake_cb_bridge_regs.cardbus_busn << 8); + data |= fake_cb_bridge_regs.pci_busn; + break; + + case (PCI_CB_MEMORY_BASE_0 >> 2): + data = fake_cb_bridge_regs.mem_base0; + break; + + case (PCI_CB_MEMORY_LIMIT_0 >> 2): + data = fake_cb_bridge_regs.mem_limit0; + break; + + case (PCI_CB_MEMORY_BASE_1 >> 2): + data = fake_cb_bridge_regs.mem_base1; + break; + + case (PCI_CB_MEMORY_LIMIT_1 >> 2): + data = fake_cb_bridge_regs.mem_limit1; + break; + + case (PCI_CB_IO_BASE_0 >> 2): + /* | 1 for 32bits io support */ + data = fake_cb_bridge_regs.io_base0 | 0x1; + break; + + case (PCI_CB_IO_LIMIT_0 >> 2): + data = fake_cb_bridge_regs.io_limit0; + break; + + case (PCI_CB_IO_BASE_1 >> 2): + /* | 1 for 32bits io support */ + data = fake_cb_bridge_regs.io_base1 | 0x1; + break; + + case (PCI_CB_IO_LIMIT_1 >> 2): + data = fake_cb_bridge_regs.io_limit1; + break; + } + + *val = postprocess_read(data, where, size); + return PCIBIOS_SUCCESSFUL; +} + +/* + * emulate configuration write access on a cardbus bridge + */ +static int fake_cb_bridge_write(int where, int size, u32 val) +{ + unsigned int reg; + u32 data, tmp; + int ret; + + ret = fake_cb_bridge_read((where & ~0x3), 4, &data); + if (ret != PCIBIOS_SUCCESSFUL) + return ret; + + data = preprocess_write(data, val, where, size); + + reg = where >> 2; + switch (reg) { + case (PCI_COMMAND >> 2): + fake_cb_bridge_regs.pci_command = (data & 0xffff); + break; + + case (PCI_CB_PRIMARY_BUS >> 2): + fake_cb_bridge_regs.cb_latency = (data >> 24) & 0xff; + fake_cb_bridge_regs.subordinate_busn = (data >> 16) & 0xff; + fake_cb_bridge_regs.cardbus_busn = (data >> 8) & 0xff; + fake_cb_bridge_regs.pci_busn = data & 0xff; + if (fake_cb_bridge_regs.cardbus_busn) + fake_cb_bridge_regs.bus_assigned = 1; + break; + + case (PCI_INTERRUPT_LINE >> 2): + tmp = (data >> 16) & 0xffff; + /* disable memory prefetch support */ + tmp &= ~PCI_CB_BRIDGE_CTL_PREFETCH_MEM0; + tmp &= ~PCI_CB_BRIDGE_CTL_PREFETCH_MEM1; + fake_cb_bridge_regs.bridge_control = tmp; + break; + + case (PCI_CB_MEMORY_BASE_0 >> 2): + fake_cb_bridge_regs.mem_base0 = data; + break; + + case (PCI_CB_MEMORY_LIMIT_0 >> 2): + fake_cb_bridge_regs.mem_limit0 = data; + break; + + case (PCI_CB_MEMORY_BASE_1 >> 2): + fake_cb_bridge_regs.mem_base1 = data; + break; + + case (PCI_CB_MEMORY_LIMIT_1 >> 2): + fake_cb_bridge_regs.mem_limit1 = data; + break; + + case (PCI_CB_IO_BASE_0 >> 2): + fake_cb_bridge_regs.io_base0 = data; + break; + + case (PCI_CB_IO_LIMIT_0 >> 2): + fake_cb_bridge_regs.io_limit0 = data; + break; + + case (PCI_CB_IO_BASE_1 >> 2): + fake_cb_bridge_regs.io_base1 = data; + break; + + case (PCI_CB_IO_LIMIT_1 >> 2): + fake_cb_bridge_regs.io_limit1 = data; + break; + } + + return PCIBIOS_SUCCESSFUL; +} + +static int bcm63xx_cb_read(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 *val) +{ + /* snoop access to slot 0x1e on root bus, we fake a cardbus + * bridge at this location */ + if (!bus->parent && PCI_SLOT(devfn) == FAKE_CB_BRIDGE_SLOT) { + fake_cb_bridge_bus_number = bus->number; + return fake_cb_bridge_read(where, size, val); + } + + /* a configuration cycle for the device behind the cardbus + * bridge is actually done as a type 0 cycle on the primary + * bus. This means that only one device can be on the cardbus + * bus */ + if (fake_cb_bridge_regs.bus_assigned && + bus->number == fake_cb_bridge_regs.cardbus_busn && + PCI_SLOT(devfn) == 0) + return bcm63xx_do_cfg_read(0, 0, + PCI_DEVFN(CARDBUS_PCI_IDSEL, 0), + where, size, val); + + return PCIBIOS_DEVICE_NOT_FOUND; +} + +static int bcm63xx_cb_write(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 val) +{ + if (!bus->parent && PCI_SLOT(devfn) == FAKE_CB_BRIDGE_SLOT) { + fake_cb_bridge_bus_number = bus->number; + return fake_cb_bridge_write(where, size, val); + } + + if (fake_cb_bridge_regs.bus_assigned && + bus->number == fake_cb_bridge_regs.cardbus_busn && + PCI_SLOT(devfn) == 0) + return bcm63xx_do_cfg_write(0, 0, + PCI_DEVFN(CARDBUS_PCI_IDSEL, 0), + where, size, val); + + return PCIBIOS_DEVICE_NOT_FOUND; +} + +struct pci_ops bcm63xx_cb_ops = { + .read = bcm63xx_cb_read, + .write = bcm63xx_cb_write, +}; + +/* + * only one IO window, so it cannot be shared by PCI and cardbus, use + * fixup to choose and detect unhandled configuration + */ +static void bcm63xx_fixup(struct pci_dev *dev) +{ + static int io_window = -1; + int i, found, new_io_window; + u32 val; + + /* look for any io resource */ + found = 0; + for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { + if (pci_resource_flags(dev, i) & IORESOURCE_IO) { + found = 1; + break; + } + } + + if (!found) + return; + + /* skip our fake bus with only cardbus bridge on it */ + if (dev->bus->number == fake_cb_bridge_bus_number) + return; + + /* find on which bus the device is */ + if (fake_cb_bridge_regs.bus_assigned && + dev->bus->number == fake_cb_bridge_regs.cardbus_busn && + PCI_SLOT(dev->devfn) == 0) + new_io_window = 1; + else + new_io_window = 0; + + if (new_io_window == io_window) + return; + + if (io_window != -1) { + printk(KERN_ERR "bcm63xx: both PCI and cardbus devices " + "need IO, which hardware cannot do\n"); + return; + } + + printk(KERN_INFO "bcm63xx: PCI IO window assigned to %s\n", + (new_io_window == 0) ? "PCI" : "cardbus"); + + val = bcm_mpi_readl(MPI_L2PIOREMAP_REG); + if (io_window) + val |= MPI_L2PREMAP_IS_CARDBUS_MASK; + else + val &= ~MPI_L2PREMAP_IS_CARDBUS_MASK; + bcm_mpi_writel(val, MPI_L2PIOREMAP_REG); + + io_window = new_io_window; +} + +DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, bcm63xx_fixup); +#endif |