diff options
Diffstat (limited to 'drivers/hwmon')
| -rw-r--r-- | drivers/hwmon/Kconfig | 12 | ||||
| -rw-r--r-- | drivers/hwmon/Makefile | 1 | ||||
| -rw-r--r-- | drivers/hwmon/adt7462.c | 4 | ||||
| -rw-r--r-- | drivers/hwmon/amc6821.c | 1115 | ||||
| -rw-r--r-- | drivers/hwmon/asus_atk0110.c | 304 | ||||
| -rw-r--r-- | drivers/hwmon/coretemp.c | 16 | ||||
| -rw-r--r-- | drivers/hwmon/fschmd.c | 7 | ||||
| -rw-r--r-- | drivers/hwmon/k10temp.c | 40 | ||||
| -rw-r--r-- | drivers/hwmon/k8temp.c | 2 | ||||
| -rw-r--r-- | drivers/hwmon/lm78.c | 25 | ||||
| -rw-r--r-- | drivers/hwmon/sis5595.c | 2 | ||||
| -rw-r--r-- | drivers/hwmon/smsc47m1.c | 2 | ||||
| -rw-r--r-- | drivers/hwmon/via686a.c | 2 | ||||
| -rw-r--r-- | drivers/hwmon/vt8231.c | 2 | ||||
| -rw-r--r-- | drivers/hwmon/w83781d.c | 26 |
15 files changed, 1453 insertions, 107 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 46c3c56..68cf877 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -392,7 +392,7 @@ config SENSORS_GL520SM config SENSORS_CORETEMP tristate "Intel Core/Core2/Atom temperature sensor" - depends on X86 && EXPERIMENTAL + depends on X86 && PCI && EXPERIMENTAL help If you say yes here you get support for the temperature sensor inside your CPU. Most of the family 6 CPUs @@ -792,6 +792,16 @@ config SENSORS_ADS7828 This driver can also be built as a module. If so, the module will be called ads7828. +config SENSORS_AMC6821 + tristate "Texas Instruments AMC6821" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for the Texas Instruments + AMC6821 hardware monitoring chips. + + This driver can also be build as a module. If so, the module + will be called amc6821. + config SENSORS_THMC50 tristate "Texas Instruments THMC50 / Analog Devices ADM1022" depends on I2C && EXPERIMENTAL diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 450c8e8..4bc215c 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -86,6 +86,7 @@ obj-$(CONFIG_SENSORS_SIS5595) += sis5595.o obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o obj-$(CONFIG_SENSORS_SMSC47M1) += smsc47m1.o obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o +obj-$(CONFIG_SENSORS_AMC6821) += amc6821.o obj-$(CONFIG_SENSORS_THMC50) += thmc50.o obj-$(CONFIG_SENSORS_TMP401) += tmp401.o obj-$(CONFIG_SENSORS_TMP421) += tmp421.o diff --git a/drivers/hwmon/adt7462.c b/drivers/hwmon/adt7462.c index a1a7ef1..b8156b4 100644 --- a/drivers/hwmon/adt7462.c +++ b/drivers/hwmon/adt7462.c @@ -94,7 +94,7 @@ static const unsigned short normal_i2c[] = { 0x58, 0x5C, I2C_CLIENT_END }; #define ADT7462_PIN24_SHIFT 6 #define ADT7462_PIN26_VOLT_INPUT 0x08 #define ADT7462_PIN25_VOLT_INPUT 0x20 -#define ADT7462_PIN28_SHIFT 6 /* cfg3 */ +#define ADT7462_PIN28_SHIFT 4 /* cfg3 */ #define ADT7462_PIN28_VOLT 0x5 #define ADT7462_REG_ALARM1 0xB8 @@ -179,7 +179,7 @@ static const unsigned short normal_i2c[] = { 0x58, 0x5C, I2C_CLIENT_END }; * * Some, but not all, of these voltages have low/high limits. */ -#define ADT7462_VOLT_COUNT 12 +#define ADT7462_VOLT_COUNT 13 #define ADT7462_VENDOR 0x41 #define ADT7462_DEVICE 0x62 diff --git a/drivers/hwmon/amc6821.c b/drivers/hwmon/amc6821.c new file mode 100644 index 0000000..fa9708c --- /dev/null +++ b/drivers/hwmon/amc6821.c @@ -0,0 +1,1115 @@ +/* + amc6821.c - Part of lm_sensors, Linux kernel modules for hardware + monitoring + Copyright (C) 2009 T. Mertelj <tomaz.mertelj@guest.arnes.si> + + Based on max6650.c: + Copyright (C) 2007 Hans J. Koch <hjk@linutronix.de> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + + +#include <linux/kernel.h> /* Needed for KERN_INFO */ +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/jiffies.h> +#include <linux/i2c.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/err.h> +#include <linux/mutex.h> + + +/* + * Addresses to scan. + */ + +static const unsigned short normal_i2c[] = {0x18, 0x19, 0x1a, 0x2c, 0x2d, 0x2e, + 0x4c, 0x4d, 0x4e, I2C_CLIENT_END}; + + + +/* + * Insmod parameters + */ + +static int pwminv = 0; /*Inverted PWM output. */ +module_param(pwminv, int, S_IRUGO); + +static int init = 1; /*Power-on initialization.*/ +module_param(init, int, S_IRUGO); + + +enum chips { amc6821 }; + +#define AMC6821_REG_DEV_ID 0x3D +#define AMC6821_REG_COMP_ID 0x3E +#define AMC6821_REG_CONF1 0x00 +#define AMC6821_REG_CONF2 0x01 +#define AMC6821_REG_CONF3 0x3F +#define AMC6821_REG_CONF4 0x04 +#define AMC6821_REG_STAT1 0x02 +#define AMC6821_REG_STAT2 0x03 +#define AMC6821_REG_TDATA_LOW 0x08 +#define AMC6821_REG_TDATA_HI 0x09 +#define AMC6821_REG_LTEMP_HI 0x0A +#define AMC6821_REG_RTEMP_HI 0x0B +#define AMC6821_REG_LTEMP_LIMIT_MIN 0x15 +#define AMC6821_REG_LTEMP_LIMIT_MAX 0x14 +#define AMC6821_REG_RTEMP_LIMIT_MIN 0x19 +#define AMC6821_REG_RTEMP_LIMIT_MAX 0x18 +#define AMC6821_REG_LTEMP_CRIT 0x1B +#define AMC6821_REG_RTEMP_CRIT 0x1D +#define AMC6821_REG_PSV_TEMP 0x1C +#define AMC6821_REG_DCY 0x22 +#define AMC6821_REG_LTEMP_FAN_CTRL 0x24 +#define AMC6821_REG_RTEMP_FAN_CTRL 0x25 +#define AMC6821_REG_DCY_LOW_TEMP 0x21 + +#define AMC6821_REG_TACH_LLIMITL 0x10 +#define AMC6821_REG_TACH_LLIMITH 0x11 +#define AMC6821_REG_TACH_HLIMITL 0x12 +#define AMC6821_REG_TACH_HLIMITH 0x13 + +#define AMC6821_CONF1_START 0x01 +#define AMC6821_CONF1_FAN_INT_EN 0x02 +#define AMC6821_CONF1_FANIE 0x04 +#define AMC6821_CONF1_PWMINV 0x08 +#define AMC6821_CONF1_FAN_FAULT_EN 0x10 +#define AMC6821_CONF1_FDRC0 0x20 +#define AMC6821_CONF1_FDRC1 0x40 +#define AMC6821_CONF1_THERMOVIE 0x80 + +#define AMC6821_CONF2_PWM_EN 0x01 +#define AMC6821_CONF2_TACH_MODE 0x02 +#define AMC6821_CONF2_TACH_EN 0x04 +#define AMC6821_CONF2_RTFIE 0x08 +#define AMC6821_CONF2_LTOIE 0x10 +#define AMC6821_CONF2_RTOIE 0x20 +#define AMC6821_CONF2_PSVIE 0x40 +#define AMC6821_CONF2_RST 0x80 + +#define AMC6821_CONF3_THERM_FAN_EN 0x80 +#define AMC6821_CONF3_REV_MASK 0x0F + +#define AMC6821_CONF4_OVREN 0x10 +#define AMC6821_CONF4_TACH_FAST 0x20 +#define AMC6821_CONF4_PSPR 0x40 +#define AMC6821_CONF4_MODE 0x80 + +#define AMC6821_STAT1_RPM_ALARM 0x01 +#define AMC6821_STAT1_FANS 0x02 +#define AMC6821_STAT1_RTH 0x04 +#define AMC6821_STAT1_RTL 0x08 +#define AMC6821_STAT1_R_THERM 0x10 +#define AMC6821_STAT1_RTF 0x20 +#define AMC6821_STAT1_LTH 0x40 +#define AMC6821_STAT1_LTL 0x80 + +#define AMC6821_STAT2_RTC 0x08 +#define AMC6821_STAT2_LTC 0x10 +#define AMC6821_STAT2_LPSV 0x20 +#define AMC6821_STAT2_L_THERM 0x40 +#define AMC6821_STAT2_THERM_IN 0x80 + +enum {IDX_TEMP1_INPUT = 0, IDX_TEMP1_MIN, IDX_TEMP1_MAX, + IDX_TEMP1_CRIT, IDX_TEMP2_INPUT, IDX_TEMP2_MIN, + IDX_TEMP2_MAX, IDX_TEMP2_CRIT, + TEMP_IDX_LEN, }; + +static const u8 temp_reg[] = {AMC6821_REG_LTEMP_HI, + AMC6821_REG_LTEMP_LIMIT_MIN, + AMC6821_REG_LTEMP_LIMIT_MAX, + AMC6821_REG_LTEMP_CRIT, + AMC6821_REG_RTEMP_HI, + AMC6821_REG_RTEMP_LIMIT_MIN, + AMC6821_REG_RTEMP_LIMIT_MAX, + AMC6821_REG_RTEMP_CRIT, }; + +enum {IDX_FAN1_INPUT = 0, IDX_FAN1_MIN, IDX_FAN1_MAX, + FAN1_IDX_LEN, }; + +static const u8 fan_reg_low[] = {AMC6821_REG_TDATA_LOW, + AMC6821_REG_TACH_LLIMITL, + AMC6821_REG_TACH_HLIMITL, }; + + +static const u8 fan_reg_hi[] = {AMC6821_REG_TDATA_HI, + AMC6821_REG_TACH_LLIMITH, + AMC6821_REG_TACH_HLIMITH, }; + +static int amc6821_probe( + struct i2c_client *client, + const struct i2c_device_id *id); +static int amc6821_detect( + struct i2c_client *client, + struct i2c_board_info *info); +static int amc6821_init_client(struct i2c_client *client); +static int amc6821_remove(struct i2c_client *client); +static struct amc6821_data *amc6821_update_device(struct device *dev); + +/* + * Driver data (common to all clients) + */ + +static const struct i2c_device_id amc6821_id[] = { + { "amc6821", amc6821 }, + { } +}; + +MODULE_DEVICE_TABLE(i2c, amc6821_id); + +static struct i2c_driver amc6821_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "amc6821", + }, + .probe = amc6821_probe, + .remove = amc6821_remove, + .id_table = amc6821_id, + .detect = amc6821_detect, + .address_list = normal_i2c, +}; + + +/* + * Client data (each client gets its own) + */ + +struct amc6821_data { + struct device *hwmon_dev; + struct mutex update_lock; + char valid; /* zero until following fields are valid */ + unsigned long last_updated; /* in jiffies */ + + /* register values */ + int temp[TEMP_IDX_LEN]; + + u16 fan[FAN1_IDX_LEN]; + u8 fan1_div; + + u8 pwm1; + u8 temp1_auto_point_temp[3]; + u8 temp2_auto_point_temp[3]; + u8 pwm1_auto_point_pwm[3]; + u8 pwm1_enable; + u8 pwm1_auto_channels_temp; + + u8 stat1; + u8 stat2; +}; + + +static ssize_t get_temp( + struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct amc6821_data *data = amc6821_update_device(dev); + int ix = to_sensor_dev_attr(devattr)->index; + + return sprintf(buf, "%d\n", data->temp[ix] * 1000); +} + + + +static ssize_t set_temp( + struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct amc6821_data *data = i2c_get_clientdata(client); + int ix = to_sensor_dev_attr(attr)->index; + long val; + + int ret = strict_strtol(buf, 10, &val); + if (ret) + return ret; + val = SENSORS_LIMIT(val / 1000, -128, 127); + + mutex_lock(&data->update_lock); + data->temp[ix] = val; + if (i2c_smbus_write_byte_data(client, temp_reg[ix], data->temp[ix])) { + dev_err(&client->dev, "Register write error, aborting.\n"); + count = -EIO; + } + mutex_unlock(&data->update_lock); + return count; +} + + + + +static ssize_t get_temp_alarm( + struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct amc6821_data *data = amc6821_update_device(dev); + int ix = to_sensor_dev_attr(devattr)->index; + u8 flag; + + switch (ix) { + case IDX_TEMP1_MIN: + flag = data->stat1 & AMC6821_STAT1_LTL; + break; + case IDX_TEMP1_MAX: + flag = data->stat1 & AMC6821_STAT1_LTH; + break; + case IDX_TEMP1_CRIT: + flag = data->stat2 & AMC6821_STAT2_LTC; + break; + case IDX_TEMP2_MIN: + flag = data->stat1 & AMC6821_STAT1_RTL; + break; + case IDX_TEMP2_MAX: + flag = data->stat1 & AMC6821_STAT1_RTH; + break; + case IDX_TEMP2_CRIT: + flag = data->stat2 & AMC6821_STAT2_RTC; + break; + default: + dev_dbg(dev, "Unknown attr->index (%d).\n", ix); + return -EINVAL; + } + if (flag) + return sprintf(buf, "1"); + else + return sprintf(buf, "0"); +} + + + + +static ssize_t get_temp2_fault( + struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct amc6821_data *data = amc6821_update_device(dev); + if (data->stat1 & AMC6821_STAT1_RTF) + return sprintf(buf, "1"); + else + return sprintf(buf, "0"); +} + +static ssize_t get_pwm1( + struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct amc6821_data *data = amc6821_update_device(dev); + return sprintf(buf, "%d\n", data->pwm1); +} + +static ssize_t set_pwm1( + struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct amc6821_data *data = i2c_get_clientdata(client); + long val; + int ret = strict_strtol(buf, 10, &val); + if (ret) + return ret; + + mutex_lock(&data->update_lock); + data->pwm1 = SENSORS_LIMIT(val , 0, 255); + i2c_smbus_write_byte_data(client, AMC6821_REG_DCY, data->pwm1); + mutex_unlock(&data->update_lock); + return count; +} + +static ssize_t get_pwm1_enable( + struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct amc6821_data *data = amc6821_update_device(dev); + return sprintf(buf, "%d\n", data->pwm1_enable); +} + +static ssize_t set_pwm1_enable( + struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct amc6821_data *data = i2c_get_clientdata(client); + long val; + int config = strict_strtol(buf, 10, &val); + if (config) + return config; + + config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF1); + if (config < 0) { + dev_err(&client->dev, + "Error reading configuration register, aborting.\n"); + return -EIO; + } + + switch (val) { + case 1: + config &= ~AMC6821_CONF1_FDRC0; + config &= ~AMC6821_CONF1_FDRC1; + break; + case 2: + config &= ~AMC6821_CONF1_FDRC0; + config |= AMC6821_CONF1_FDRC1; + break; + case 3: + config |= AMC6821_CONF1_FDRC0; + config |= AMC6821_CONF1_FDRC1; + break; + default: + return -EINVAL; + } + mutex_lock(&data->update_lock); + if (i2c_smbus_write_byte_data(client, AMC6821_REG_CONF1, config)) { + dev_err(&client->dev, + "Configuration register write error, aborting.\n"); + count = -EIO; + } + mutex_unlock(&data->update_lock); + return count; +} + + +static ssize_t get_pwm1_auto_channels_temp( + struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct amc6821_data *data = amc6821_update_device(dev); + return sprintf(buf, "%d\n", data->pwm1_auto_channels_temp); +} + + +static ssize_t get_temp_auto_point_temp( + struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + int ix = to_sensor_dev_attr_2(devattr)->index; + int nr = to_sensor_dev_attr_2(devattr)->nr; + struct amc6821_data *data = amc6821_update_device(dev); + switch (nr) { + case 1: + return sprintf(buf, "%d\n", + data->temp1_auto_point_temp[ix] * 1000); + break; + case 2: + return sprintf(buf, "%d\n", + data->temp2_auto_point_temp[ix] * 1000); + break; + default: + dev_dbg(dev, "Unknown attr->nr (%d).\n", nr); + return -EINVAL; + } +} + + +static ssize_t get_pwm1_auto_point_pwm( + struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + int ix = to_sensor_dev_attr(devattr)->index; + struct amc6821_data *data = amc6821_update_device(dev); + return sprintf(buf, "%d\n", data->pwm1_auto_point_pwm[ix]); +} + + +static inline ssize_t set_slope_register(struct i2c_client *client, + u8 reg, + u8 dpwm, + u8 *ptemp) +{ + int dt; + u8 tmp; + + dt = ptemp[2]-ptemp[1]; + for (tmp = 4; tmp > 0; tmp--) { + if (dt * (0x20 >> tmp) >= dpwm) + break; + } + tmp |= (ptemp[1] & 0x7C) << 1; + if (i2c_smbus_write_byte_data(client, + reg, tmp)) { + dev_err(&client->dev, "Register write error, aborting.\n"); + return -EIO; + } + return 0; +} + + + +static ssize_t set_temp_auto_point_temp( + struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct amc6821_data *data = amc6821_update_device(dev); + int ix = to_sensor_dev_attr_2(attr)->index; + int nr = to_sensor_dev_attr_2(attr)->nr; + u8 *ptemp; + u8 reg; + int dpwm; + long val; + int ret = strict_strtol(buf, 10, &val); + if (ret) + return ret; + + switch (nr) { + case 1: + ptemp = data->temp1_auto_point_temp; + reg = AMC6821_REG_LTEMP_FAN_CTRL; + break; + case 2: + ptemp = data->temp2_auto_point_temp; + reg = AMC6821_REG_RTEMP_FAN_CTRL; + break; + default: + dev_dbg(dev, "Unknown attr->nr (%d).\n", nr); + return -EINVAL; + } + + data->valid = 0; + mutex_lock(&data->update_lock); + switch (ix) { + case 0: + ptemp[0] = SENSORS_LIMIT(val / 1000, 0, + data->temp1_auto_point_temp[1]); + ptemp[0] = SENSORS_LIMIT(ptemp[0], 0, + data->temp2_auto_point_temp[1]); + ptemp[0] = SENSORS_LIMIT(ptemp[0], 0, 63); + if (i2c_smbus_write_byte_data( + client, + AMC6821_REG_PSV_TEMP, + ptemp[0])) { + dev_err(&client->dev, + "Register write error, aborting.\n"); + count = -EIO; + } + goto EXIT; + break; + case 1: + ptemp[1] = SENSORS_LIMIT( + val / 1000, + (ptemp[0] & 0x7C) + 4, + 124); + ptemp[1] &= 0x7C; + ptemp[2] = SENSORS_LIMIT( + ptemp[2], ptemp[1] + 1, + 255); + break; + case 2: + ptemp[2] = SENSORS_LIMIT( + val / 1000, + ptemp[1]+1, + 255); + break; + default: + dev_dbg(dev, "Unknown attr->index (%d).\n", ix); + count = -EINVAL; + goto EXIT; + } + dpwm = data->pwm1_auto_point_pwm[2] - data->pwm1_auto_point_pwm[1]; + if (set_slope_register(client, reg, dpwm, ptemp)) + count = -EIO; + +EXIT: + mutex_unlock(&data->update_lock); + return count; +} + + + +static ssize_t set_pwm1_auto_point_pwm( + struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct amc6821_data *data = i2c_get_clientdata(client); + int dpwm; + long val; + int ret = strict_strtol(buf, 10, &val); + if (ret) + return ret; + + mutex_lock(&data->update_lock); + data->pwm1_auto_point_pwm[1] = SENSORS_LIMIT(val, 0, 254); + if (i2c_smbus_write_byte_data(client, AMC6821_REG_DCY_LOW_TEMP, + data->pwm1_auto_point_pwm[1])) { + dev_err(&client->dev, "Register write error, aborting.\n"); + count = -EIO; + goto EXIT; + } + dpwm = data->pwm1_auto_point_pwm[2] - data->pwm1_auto_point_pwm[1]; + if (set_slope_register(client, AMC6821_REG_LTEMP_FAN_CTRL, dpwm, + data->temp1_auto_point_temp)) { + count = -EIO; + goto EXIT; + } + if (set_slope_register(client, AMC6821_REG_RTEMP_FAN_CTRL, dpwm, + data->temp2_auto_point_temp)) { + count = -EIO; + goto EXIT; + } + +EXIT: + data->valid = 0; + mutex_unlock(&data->update_lock); + return count; +} + +static ssize_t get_fan( + struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct amc6821_data *data = amc6821_update_device(dev); + int ix = to_sensor_dev_attr(devattr)->index; + if (0 == data->fan[ix]) + return sprintf(buf, "0"); + return sprintf(buf, "%d\n", (int)(6000000 / data->fan[ix])); +} + + + +static ssize_t get_fan1_fault( + struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct amc6821_data *data = amc6821_update_device(dev); + if (data->stat1 & AMC6821_STAT1_FANS) + return sprintf(buf, "1"); + else + return sprintf(buf, "0"); +} + + + +static ssize_t set_fan( + struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct amc6821_data *data = i2c_get_clientdata(client); + long val; + int ix = to_sensor_dev_attr(attr)->index; + int ret = strict_strtol(buf, 10, &val); + if (ret) + return ret; + val = 1 > val ? 0xFFFF : 6000000/val; + + mutex_lock(&data->update_lock); + data->fan[ix] = (u16) SENSORS_LIMIT(val, 1, 0xFFFF); + if (i2c_smbus_write_byte_data(client, fan_reg_low[ix], + data->fan[ix] & 0xFF)) { + dev_err(&client->dev, "Register write error, aborting.\n"); + count = -EIO; + goto EXIT; + } + if (i2c_smbus_write_byte_data(client, + fan_reg_hi[ix], data->fan[ix] >> 8)) { + dev_err(&client->dev, "Register write error, aborting.\n"); + count = -EIO; + } +EXIT: + mutex_unlock(&data->update_lock); + return count; +} + + + +static ssize_t get_fan1_div( + struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct amc6821_data *data = amc6821_update_device(dev); + return sprintf(buf, "%d\n", data->fan1_div); +} + +static ssize_t set_fan1_div( + struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct amc6821_data *data = i2c_get_clientdata(client); + long val; + int config = strict_strtol(buf, 10, &val); + if (config) + return config; + + config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF4); + if (config < 0) { + dev_err(&client->dev, + "Error reading configuration register, aborting.\n"); + return -EIO; + } + mutex_lock(&data->update_lock); + switch (val) { + case 2: + config &= ~AMC6821_CONF4_PSPR; + data->fan1_div = 2; + break; + case 4: + config |= AMC6821_CONF4_PSPR; + data->fan1_div = 4; + break; + default: + count = -EINVAL; + goto EXIT; + } + if (i2c_smbus_write_byte_data(client, AMC6821_REG_CONF4, config)) { + dev_err(&client->dev, + "Configuration register write error, aborting.\n"); + count = -EIO; + } +EXIT: + mutex_unlock(&data->update_lock); + return count; +} + + + +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, + get_temp, NULL, IDX_TEMP1_INPUT); +static SENSOR_DEVICE_ATTR(temp1_min, S_IRUGO | S_IWUSR, get_temp, + set_temp, IDX_TEMP1_MIN); +static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR, get_temp, + set_temp, IDX_TEMP1_MAX); +static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO | S_IWUSR, get_temp, + set_temp, IDX_TEMP1_CRIT); +static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, + get_temp_alarm, NULL, IDX_TEMP1_MIN); +static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, + get_temp_alarm, NULL, IDX_TEMP1_MAX); +static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, + get_temp_alarm, NULL, IDX_TEMP1_CRIT); +static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO | S_IWUSR, + get_temp, NULL, IDX_TEMP2_INPUT); +static SENSOR_DEVICE_ATTR(temp2_min, S_IRUGO | S_IWUSR, get_temp, + set_temp, IDX_TEMP2_MIN); +static SENSOR_DEVICE_ATTR(temp2_max, S_IRUGO | S_IWUSR, get_temp, + set_temp, IDX_TEMP2_MAX); +static SENSOR_DEVICE_ATTR(temp2_crit, S_IRUGO | S_IWUSR, get_temp, + set_temp, IDX_TEMP2_CRIT); +static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, + get_temp2_fault, NULL, 0); +static SENSOR_DEVICE_ATTR(temp2_min_alarm, S_IRUGO, + get_temp_alarm, NULL, IDX_TEMP2_MIN); +static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO, + get_temp_alarm, NULL, IDX_TEMP2_MAX); +static SENSOR_DEVICE_ATTR(temp2_crit_alarm, S_IRUGO, + get_temp_alarm, NULL, IDX_TEMP2_CRIT); +static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, get_fan, NULL, IDX_FAN1_INPUT); +static SENSOR_DEVICE_ATTR(fan1_min, S_IRUGO | S_IWUSR, + get_fan, set_fan, IDX_FAN1_MIN); +static SENSOR_DEVICE_ATTR(fan1_max, S_IRUGO | S_IWUSR, + get_fan, set_fan, IDX_FAN1_MAX); +static SENSOR_DEVICE_ATTR(fan1_fault, S_IRUGO, get_fan1_fault, NULL, 0); +static SENSOR_DEVICE_ATTR(fan1_div, S_IRUGO | S_IWUSR, + get_fan1_div, set_fan1_div, 0); + +static SENSOR_DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, get_pwm1, set_pwm1, 0); +static SENSOR_DEVICE_ATTR(pwm1_enable, S_IWUSR | S_IRUGO, + get_pwm1_enable, set_pwm1_enable, 0); +static SENSOR_DEVICE_ATTR(pwm1_auto_point1_pwm, S_IRUGO, + get_pwm1_auto_point_pwm, NULL, 0); +static SENSOR_DEVICE_ATTR(pwm1_auto_point2_pwm, S_IWUSR | S_IRUGO, + get_pwm1_auto_point_pwm, set_pwm1_auto_point_pwm, 1); +static SENSOR_DEVICE_ATTR(pwm1_auto_point3_pwm, S_IRUGO, + get_pwm1_auto_point_pwm, NULL, 2); +static SENSOR_DEVICE_ATTR(pwm1_auto_channels_temp, S_IRUGO, + get_pwm1_auto_channels_temp, NULL, 0); +static SENSOR_DEVICE_ATTR_2(temp1_auto_point1_temp, S_IRUGO, + get_temp_auto_point_temp, NULL, 1, 0); +static SENSOR_DEVICE_ATTR_2(temp1_auto_point2_temp, S_IWUSR | S_IRUGO, + get_temp_auto_point_temp, set_temp_auto_point_temp, 1, 1); +static SENSOR_DEVICE_ATTR_2(temp1_auto_point3_temp, S_IWUSR | S_IRUGO, + get_temp_auto_point_temp, set_temp_auto_point_temp, 1, 2); + +static SENSOR_DEVICE_ATTR_2(temp2_auto_point1_temp, S_IWUSR | S_IRUGO, + get_temp_auto_point_temp, set_temp_auto_point_temp, 2, 0); +static SENSOR_DEVICE_ATTR_2(temp2_auto_point2_temp, S_IWUSR | S_IRUGO, + get_temp_auto_point_temp, set_temp_auto_point_temp, 2, 1); +static SENSOR_DEVICE_ATTR_2(temp2_auto_point3_temp, S_IWUSR | S_IRUGO, + get_temp_auto_point_temp, set_temp_auto_point_temp, 2, 2); + + + +static struct attribute *amc6821_attrs[] = { + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp1_min.dev_attr.attr, + &sensor_dev_attr_temp1_max.dev_attr.attr, + &sensor_dev_attr_temp1_crit.dev_attr.attr, + &sensor_dev_attr_temp1_min_alarm.dev_attr.attr, + &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, + &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_input.dev_attr.attr, + &sensor_dev_attr_temp2_min.dev_attr.attr, + &sensor_dev_attr_temp2_max.dev_attr.attr, + &sensor_dev_attr_temp2_crit.dev_attr.attr, + &sensor_dev_attr_temp2_min_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_max_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_fault.dev_attr.attr, + &sensor_dev_attr_fan1_input.dev_attr.attr, + &sensor_dev_attr_fan1_min.dev_attr.attr, + &sensor_dev_attr_fan1_max.dev_attr.attr, + &sensor_dev_attr_fan1_fault.dev_attr.attr, + &sensor_dev_attr_fan1_div.dev_attr.attr, + &sensor_dev_attr_pwm1.dev_attr.attr, + &sensor_dev_attr_pwm1_enable.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point3_pwm.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point3_temp.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point3_temp.dev_attr.attr, + NULL +}; + +static struct attribute_group amc6821_attr_grp = { + .attrs = amc6821_attrs, +}; + + + +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int amc6821_detect( + struct i2c_client *client, + struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = client->adapter; + int address = client->addr; + int dev_id, comp_id; + + dev_dbg(&adapter->dev, "amc6821_detect called.\n"); + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { + dev_dbg(&adapter->dev, + "amc6821: I2C bus doesn't support byte mode, " + "skipping.\n"); + return -ENODEV; + } + + dev_id = i2c_smbus_read_byte_data(client, AMC6821_REG_DEV_ID); + comp_id = i2c_smbus_read_byte_data(client, AMC6821_REG_COMP_ID); + if (dev_id != 0x21 || comp_id != 0x49) { + dev_dbg(&adapter->dev, + "amc6821: detection failed at 0x%02x.\n", + address); + return -ENODEV; + } + + /* Bit 7 of the address register is ignored, so we can check the + ID registers again */ + dev_id = i2c_smbus_read_byte_data(client, 0x80 | AMC6821_REG_DEV_ID); + comp_id = i2c_smbus_read_byte_data(client, 0x80 | AMC6821_REG_COMP_ID); + if (dev_id != 0x21 || comp_id != 0x49) { + dev_dbg(&adapter->dev, + "amc6821: detection failed at 0x%02x.\n", + address); + return -ENODEV; + } + + dev_info(&adapter->dev, "amc6821: chip found at 0x%02x.\n", address); + strlcpy(info->type, "amc6821", I2C_NAME_SIZE); + + return 0; +} + +static int amc6821_probe( + struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct amc6821_data *data; + int err; + + data = kzalloc(sizeof(struct amc6821_data), GFP_KERNEL); + if (!data) { + dev_err(&client->dev, "out of memory.\n"); + return -ENOMEM; + } + + + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); + + /* + * Initialize the amc6821 chip + */ + err = amc6821_init_client(client); + if (err) + goto err_free; + + err = sysfs_create_group(&client->dev.kobj, &amc6821_attr_grp); + if (err) + goto err_free; + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (!IS_ERR(data->hwmon_dev)) + return 0; + + err = PTR_ERR(data->hwmon_dev); + dev_err(&client->dev, "error registering hwmon device.\n"); + sysfs_remove_group(&client->dev.kobj, &amc6821_attr_grp); +err_free: + kfree(data); + return err; +} + +static int amc6821_remove(struct i2c_client *client) +{ + struct amc6821_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &amc6821_attr_grp); + + kfree(data); + + return 0; +} + + +static int amc6821_init_client(struct i2c_client *client) +{ + int config; + int err = -EIO; + + if (init) { + config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF4); + + if (config < 0) { + dev_err(&client->dev, + "Error reading configuration register, aborting.\n"); + return err; + } + + config |= AMC6821_CONF4_MODE; + + if (i2c_smbus_write_byte_data(client, AMC6821_REG_CONF4, + config)) { + dev_err(&client->dev, + "Configuration register write error, aborting.\n"); + return err; + } + + config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF3); + + if (config < 0) { + dev_err(&client->dev, + "Error reading configuration register, aborting.\n"); + return err; + } + + dev_info(&client->dev, "Revision %d\n", config & 0x0f); + + config &= ~AMC6821_CONF3_THERM_FAN_EN; + + if (i2c_smbus_write_byte_data(client, AMC6821_REG_CONF3, + config)) { + dev_err(&client->dev, + "Configuration register write error, aborting.\n"); + return err; + } + + config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF2); + + if (config < 0) { + dev_err(&client->dev, + "Error reading configuration register, aborting.\n"); + return err; + } + + config &= ~AMC6821_CONF2_RTFIE; + config &= ~AMC6821_CONF2_LTOIE; + config &= ~AMC6821_CONF2_RTOIE; + if (i2c_smbus_write_byte_data(client, + AMC6821_REG_CONF2, config)) { + dev_err(&client->dev, + "Configuration register write error, aborting.\n"); + return err; + } + + config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF1); + + if (config < 0) { + dev_err(&client->dev, + "Error reading configuration register, aborting.\n"); + return err; + } + + config &= ~AMC6821_CONF1_THERMOVIE; + config &= ~AMC6821_CONF1_FANIE; + config |= AMC6821_CONF1_START; + if (pwminv) + config |= AMC6821_CONF1_PWMINV; + else + config &= ~AMC6821_CONF1_PWMINV; + + if (i2c_smbus_write_byte_data( + client, AMC6821_REG_CONF1, config)) { + dev_err(&client->dev, + "Configuration register write error, aborting.\n"); + return err; + } + } + return 0; +} + + +static struct amc6821_data *amc6821_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct amc6821_data *data = i2c_get_clientdata(client); + int timeout = HZ; + u8 reg; + int i; + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + timeout) || + !data->valid) { + + for (i = 0; i < TEMP_IDX_LEN; i++) + data->temp[i] = i2c_smbus_read_byte_data(client, + temp_reg[i]); + + data->stat1 = i2c_smbus_read_byte_data(client, + AMC6821_REG_STAT1); + data->stat2 = i2c_smbus_read_byte_data(client, + AMC6821_REG_STAT2); + + data->pwm1 = i2c_smbus_read_byte_data(client, + AMC6821_REG_DCY); + for (i = 0; i < FAN1_IDX_LEN; i++) { + data->fan[i] = i2c_smbus_read_byte_data( + client, + fan_reg_low[i]); + data->fan[i] += i2c_smbus_read_byte_data( + client, + fan_reg_hi[i]) << 8; + } + data->fan1_div = i2c_smbus_read_byte_data(client, + AMC6821_REG_CONF4); + data->fan1_div = data->fan1_div & AMC6821_CONF4_PSPR ? 4 : 2; + + data->pwm1_auto_point_pwm[0] = 0; + data->pwm1_auto_point_pwm[2] = 255; + data->pwm1_auto_point_pwm[1] = i2c_smbus_read_byte_data(client, + AMC6821_REG_DCY_LOW_TEMP); + + data->temp1_auto_point_temp[0] = + i2c_smbus_read_byte_data(client, + AMC6821_REG_PSV_TEMP); + data->temp2_auto_point_temp[0] = + data->temp1_auto_point_temp[0]; + reg = i2c_smbus_read_byte_data(client, + AMC6821_REG_LTEMP_FAN_CTRL); + data->temp1_auto_point_temp[1] = (reg & 0xF8) >> 1; + reg &= 0x07; + reg = 0x20 >> reg; + if (reg > 0) + data->temp1_auto_point_temp[2] = + data->temp1_auto_point_temp[1] + + (data->pwm1_auto_point_pwm[2] - + data->pwm1_auto_point_pwm[1]) / reg; + else + data->temp1_auto_point_temp[2] = 255; + + reg = i2c_smbus_read_byte_data(client, + AMC6821_REG_RTEMP_FAN_CTRL); + data->temp2_auto_point_temp[1] = (reg & 0xF8) >> 1; + reg &= 0x07; + reg = 0x20 >> reg; + if (reg > 0) + data->temp2_auto_point_temp[2] = + data->temp2_auto_point_temp[1] + + (data->pwm1_auto_point_pwm[2] - + data->pwm1_auto_point_pwm[1]) / reg; + else + data->temp2_auto_point_temp[2] = 255; + + reg = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF1); + reg = (reg >> 5) & 0x3; + switch (reg) { + case 0: /*open loop: software sets pwm1*/ + data->pwm1_auto_channels_temp = 0; + data->pwm1_enable = 1; + break; + case 2: /*closed loop: remote T (temp2)*/ + data->pwm1_auto_channels_temp = 2; + data->pwm1_enable = 2; + break; + case 3: /*closed loop: local and remote T (temp2)*/ + data->pwm1_auto_channels_temp = 3; + data->pwm1_enable = 3; + break; + case 1: /*semi-open loop: software sets rpm, chip controls pwm1, + *currently not implemented + */ + data->pwm1_auto_channels_temp = 0; + data->pwm1_enable = 0; + break; + } + + data->last_updated = jiffies; + data->valid = 1; + } + mutex_unlock(&data->update_lock); + return data; +} + + +static int __init amc6821_init(void) +{ + return i2c_add_driver(&amc6821_driver); +} + +static void __exit amc6821_exit(void) +{ + i2c_del_driver(&amc6821_driver); +} + +module_init(amc6821_init); +module_exit(amc6821_exit); + + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("T. Mertelj <tomaz.mertelj@guest.arnes.si>"); +MODULE_DESCRIPTION("Texas Instruments amc6821 hwmon driver"); diff --git a/drivers/hwmon/asus_atk0110.c b/drivers/hwmon/asus_atk0110.c index 5a3ee00..028284f 100644 --- a/drivers/hwmon/asus_atk0110.c +++ b/drivers/hwmon/asus_atk0110.c @@ -5,6 +5,7 @@ * See COPYING in the top level directory of the kernel tree. */ +#include <linux/debugfs.h> #include <linux/kernel.h> #include <linux/hwmon.h> #include <linux/list.h> @@ -101,6 +102,11 @@ struct atk_data { int temperature_count; int fan_count; struct list_head sensor_list; + + struct { + struct dentry *root; + u32 id; + } debugfs; }; @@ -624,6 +630,187 @@ static int atk_read_value(struct atk_sensor_data *sensor, u64 *value) return err; } +#ifdef CONFIG_DEBUG_FS +static int atk_debugfs_gitm_get(void *p, u64 *val) +{ + struct atk_data *data = p; + union acpi_object *ret; + struct atk_acpi_ret_buffer *buf; + int err = 0; + + if (!data->read_handle) + return -ENODEV; + + if (!data->debugfs.id) + return -EINVAL; + + ret = atk_gitm(data, data->debugfs.id); + if (IS_ERR(ret)) + return PTR_ERR(ret); + + buf = (struct atk_acpi_ret_buffer *)ret->buffer.pointer; + if (buf->flags) + *val = buf->value; + else + err = -EIO; + + return err; +} + +DEFINE_SIMPLE_ATTRIBUTE(atk_debugfs_gitm, + atk_debugfs_gitm_get, + NULL, + "0x%08llx\n") + +static int atk_acpi_print(char *buf, size_t sz, union acpi_object *obj) +{ + int ret = 0; + + switch (obj->type) { + case ACPI_TYPE_INTEGER: + ret = snprintf(buf, sz, "0x%08llx\n", obj->integer.value); + break; + case ACPI_TYPE_STRING: + ret = snprintf(buf, sz, "%s\n", obj->string.pointer); + break; + } + + return ret; +} + +static void atk_pack_print(char *buf, size_t sz, union acpi_object *pack) +{ + int ret; + int i; + + for (i = 0; i < pack->package.count; i++) { + union acpi_object *obj = &pack->package.elements[i]; + + ret = atk_acpi_print(buf, sz, obj); + if (ret >= sz) + break; + buf += ret; + sz -= ret; + } +} + +static int atk_debugfs_ggrp_open(struct inode *inode, struct file *file) +{ + struct atk_data *data = inode->i_private; + char *buf = NULL; + union acpi_object *ret; + u8 cls; + int i; + + if (!data->enumerate_handle) + return -ENODEV; + if (!data->debugfs.id) + return -EINVAL; + + cls = (data->debugfs.id & 0xff000000) >> 24; + ret = atk_ggrp(data, cls); + if (IS_ERR(ret)) + return PTR_ERR(ret); + + for (i = 0; i < ret->package.count; i++) { + union acpi_object *pack = &ret->package.elements[i]; + union acpi_object *id; + + if (pack->type != ACPI_TYPE_PACKAGE) + continue; + if (!pack->package.count) + continue; + id = &pack->package.elements[0]; + if (id->integer.value == data->debugfs.id) { + /* Print the package */ + buf = kzalloc(512, GFP_KERNEL); + if (!buf) { + ACPI_FREE(ret); + return -ENOMEM; + } + atk_pack_print(buf, 512, pack); + break; + } + } + ACPI_FREE(ret); + + if (!buf) + return -EINVAL; + + file->private_data = buf; + + return nonseekable_open(inode, file); +} + +static ssize_t atk_debugfs_ggrp_read(struct file *file, char __user *buf, + size_t count, loff_t *pos) +{ + char *str = file->private_data; + size_t len = strlen(str); + + return simple_read_from_buffer(buf, count, pos, str, len); +} + +static int atk_debugfs_ggrp_release(struct inode *inode, struct file *file) +{ + kfree(file->private_data); + return 0; +} + +static const struct file_operations atk_debugfs_ggrp_fops = { + .read = atk_debugfs_ggrp_read, + .open = atk_debugfs_ggrp_open, + .release = atk_debugfs_ggrp_release, +}; + +static void atk_debugfs_init(struct atk_data *data) +{ + struct dentry *d; + struct dentry *f; + + data->debugfs.id = 0; + + d = debugfs_create_dir("asus_atk0110", NULL); + if (!d || IS_ERR(d)) + return; + + f = debugfs_create_x32("id", S_IRUSR | S_IWUSR, d, &data->debugfs.id); + if (!f || IS_ERR(f)) + goto cleanup; + + f = debugfs_create_file("gitm", S_IRUSR, d, data, + &atk_debugfs_gitm); + if (!f || IS_ERR(f)) + goto cleanup; + + f = debugfs_create_file("ggrp", S_IRUSR, d, data, + &atk_debugfs_ggrp_fops); + if (!f || IS_ERR(f)) + goto cleanup; + + data->debugfs.root = d; + + return; +cleanup: + debugfs_remove_recursive(d); +} + +static void atk_debugfs_cleanup(struct atk_data *data) +{ + debugfs_remove_recursive(data->debugfs.root); +} + +#else /* CONFIG_DEBUG_FS */ + +static void atk_debugfs_init(struct atk_data *data) +{ +} + +static void atk_debugfs_cleanup(struct atk_data *data) +{ +} +#endif + static int atk_add_sensor(struct atk_data *data, union acpi_object *obj) { struct device *dev = &data->acpi_dev->dev; @@ -1047,76 +1234,75 @@ remove: return err; } -static int atk_check_old_if(struct atk_data *data) +static int atk_probe_if(struct atk_data *data) { struct device *dev = &data->acpi_dev->dev; acpi_handle ret; acpi_status status; + int err = 0; /* RTMP: read temperature */ status = acpi_get_handle(data->atk_handle, METHOD_OLD_READ_TMP, &ret); - if (status != AE_OK) { + if (ACPI_SUCCESS(status)) + data->rtmp_handle = ret; + else dev_dbg(dev, "method " METHOD_OLD_READ_TMP " not found: %s\n", acpi_format_exception(status)); - return -ENODEV; - } - data->rtmp_handle = ret; /* RVLT: read voltage */ status = acpi_get_handle(data->atk_handle, METHOD_OLD_READ_VLT, &ret); - if (status != AE_OK) { + if (ACPI_SUCCESS(status)) + data->rvlt_handle = ret; + else dev_dbg(dev, "method " METHOD_OLD_READ_VLT " not found: %s\n", acpi_format_exception(status)); - return -ENODEV; - } - data->rvlt_handle = ret; /* RFAN: read fan status */ status = acpi_get_handle(data->atk_handle, METHOD_OLD_READ_FAN, &ret); - if (status != AE_OK) { + if (ACPI_SUCCESS(status)) + data->rfan_handle = ret; + else dev_dbg(dev, "method " METHOD_OLD_READ_FAN " not found: %s\n", acpi_format_exception(status)); - return -ENODEV; - } - data->rfan_handle = ret; - - return 0; -} - -static int atk_check_new_if(struct atk_data *data) -{ - struct device *dev = &data->acpi_dev->dev; - acpi_handle ret; - acpi_status status; /* Enumeration */ status = acpi_get_handle(data->atk_handle, METHOD_ENUMERATE, &ret); - if (status != AE_OK) { + if (ACPI_SUCCESS(status)) + data->enumerate_handle = ret; + else dev_dbg(dev, "method " METHOD_ENUMERATE " not found: %s\n", acpi_format_exception(status)); - return -ENODEV; - } - data->enumerate_handle = ret; /* De-multiplexer (read) */ status = acpi_get_handle(data->atk_handle, METHOD_READ, &ret); - if (status != AE_OK) { + if (ACPI_SUCCESS(status)) + data->read_handle = ret; + else dev_dbg(dev, "method " METHOD_READ " not found: %s\n", acpi_format_exception(status)); - return -ENODEV; - } - data->read_handle = ret; /* De-multiplexer (write) */ status = acpi_get_handle(data->atk_handle, METHOD_WRITE, &ret); - if (status != AE_OK) { - dev_dbg(dev, "method " METHOD_READ " not found: %s\n", + if (ACPI_SUCCESS(status)) + data->write_handle = ret; + else + dev_dbg(dev, "method " METHOD_WRITE " not found: %s\n", acpi_format_exception(status)); - return -ENODEV; - } - data->write_handle = ret; - return 0; + /* Check for hwmon methods: first check "old" style methods; note that + * both may be present: in this case we stick to the old interface; + * analysis of multiple DSDTs indicates that when both interfaces + * are present the new one (GGRP/GITM) is not functional. + */ + if (data->rtmp_handle && data->rvlt_handle && data->rfan_handle) + data->old_interface = true; + else if (data->enumerate_handle && data->read_handle && + data->write_handle) + data->old_interface = false; + else + err = -ENODEV; + + return err; } static int atk_add(struct acpi_device *device) @@ -1143,40 +1329,30 @@ static int atk_add(struct acpi_device *device) &buf, ACPI_TYPE_PACKAGE); if (ret != AE_OK) { dev_dbg(&device->dev, "atk: method MBIF not found\n"); - err = -ENODEV; - goto out; + } else { + obj = buf.pointer; + if (obj->package.count >= 2) { + union acpi_object *id = &obj->package.elements[1]; + if (id->type == ACPI_TYPE_STRING) + dev_dbg(&device->dev, "board ID = %s\n", + id->string.pointer); + } + ACPI_FREE(buf.pointer); } - obj = buf.pointer; - if (obj->package.count >= 2 && - obj->package.elements[1].type == ACPI_TYPE_STRING) { - dev_dbg(&device->dev, "board ID = %s\n", - obj->package.elements[1].string.pointer); + err = atk_probe_if(data); + if (err) { + dev_err(&device->dev, "No usable hwmon interface detected\n"); + goto out; } - ACPI_FREE(buf.pointer); - /* Check for hwmon methods: first check "old" style methods; note that - * both may be present: in this case we stick to the old interface; - * analysis of multiple DSDTs indicates that when both interfaces - * are present the new one (GGRP/GITM) is not functional. - */ - err = atk_check_old_if(data); - if (!err) { + if (data->old_interface) { dev_dbg(&device->dev, "Using old hwmon interface\n"); - data->old_interface = true; + err = atk_enumerate_old_hwmon(data); } else { - err = atk_check_new_if(data); - if (err) - goto out; - dev_dbg(&device->dev, "Using new hwmon interface\n"); - data->old_interface = false; - } - - if (data->old_interface) - err = atk_enumerate_old_hwmon(data); - else err = atk_enumerate_new_hwmon(data); + } if (err < 0) goto out; if (err == 0) { @@ -1190,6 +1366,8 @@ static int atk_add(struct acpi_device *device) if (err) goto cleanup; + atk_debugfs_init(data); + device->driver_data = data; return 0; cleanup: @@ -1208,6 +1386,8 @@ static int atk_remove(struct acpi_device *device, int type) device->driver_data = NULL; + atk_debugfs_cleanup(data); + atk_remove_files(data); atk_free_sensors(data); hwmon_device_unregister(data->hwmon_dev); diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c index caef39c..2d7bcee 100644 --- a/drivers/hwmon/coretemp.c +++ b/drivers/hwmon/coretemp.c @@ -33,6 +33,7 @@ #include <linux/list.h> #include <linux/platform_device.h> #include <linux/cpu.h> +#include <linux/pci.h> #include <asm/msr.h> #include <asm/processor.h> @@ -161,6 +162,7 @@ static int __devinit adjust_tjmax(struct cpuinfo_x86 *c, u32 id, struct device * int usemsr_ee = 1; int err; u32 eax, edx; + struct pci_dev *host_bridge; /* Early chips have no MSR for TjMax */ @@ -168,11 +170,21 @@ static int __devinit adjust_tjmax(struct cpuinfo_x86 *c, u32 id, struct device * usemsr_ee = 0; } - /* Atoms seems to have TjMax at 90C */ + /* Atom CPUs */ if (c->x86_model == 0x1c) { usemsr_ee = 0; - tjmax = 90000; + + host_bridge = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0)); + + if (host_bridge && host_bridge->vendor == PCI_VENDOR_ID_INTEL + && (host_bridge->device == 0xa000 /* NM10 based nettop */ + || host_bridge->device == 0xa010)) /* NM10 based netbook */ + tjmax = 100000; + else + tjmax = 90000; + + pci_dev_put(host_bridge); } if ((c->x86_model > 0xe) && (usemsr_ee)) { diff --git a/drivers/hwmon/fschmd.c b/drivers/hwmon/fschmd.c index bd0fc67..fa07282 100644 --- a/drivers/hwmon/fschmd.c +++ b/drivers/hwmon/fschmd.c @@ -768,6 +768,7 @@ leave: static int watchdog_open(struct inode *inode, struct file *filp) { struct fschmd_data *pos, *data = NULL; + int watchdog_is_open; /* We get called from drivers/char/misc.c with misc_mtx hold, and we call misc_register() from fschmd_probe() with watchdog_data_mutex @@ -782,10 +783,12 @@ static int watchdog_open(struct inode *inode, struct file *filp) } } /* Note we can never not have found data, so we don't check for this */ - kref_get(&data->kref); + watchdog_is_open = test_and_set_bit(0, &data->watchdog_is_open); + if (!watchdog_is_open) + kref_get(&data->kref); mutex_unlock(&watchdog_data_mutex); - if (test_and_set_bit(0, &data->watchdog_is_open)) + if (watchdog_is_open) return -EBUSY; /* Start the watchdog */ diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c index d8a26d1..099a213 100644 --- a/drivers/hwmon/k10temp.c +++ b/drivers/hwmon/k10temp.c @@ -33,6 +33,16 @@ static bool force; module_param(force, bool, 0444); MODULE_PARM_DESC(force, "force loading on processors with erratum 319"); +/* CPUID function 0x80000001, ebx */ +#define CPUID_PKGTYPE_MASK 0xf0000000 +#define CPUID_PKGTYPE_F 0x00000000 +#define CPUID_PKGTYPE_AM2R2_AM3 0x10000000 + +/* DRAM controller (PCI function 2) */ +#define REG_DCT0_CONFIG_HIGH 0x094 +#define DDR3_MODE 0x00000100 + +/* miscellaneous (PCI function 3) */ #define REG_HARDWARE_THERMAL_CONTROL 0x64 #define HTC_ENABLE 0x00000001 @@ -85,13 +95,28 @@ static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO, show_temp_crit, NULL, 0); static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IRUGO, show_temp_crit, NULL, 1); static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); -static bool __devinit has_erratum_319(void) +static bool __devinit has_erratum_319(struct pci_dev *pdev) { + u32 pkg_type, reg_dram_cfg; + + if (boot_cpu_data.x86 != 0x10) + return false; + /* - * Erratum 319: The thermal sensor of older Family 10h processors - * (B steppings) may be unreliable. + * Erratum 319: The thermal sensor of Socket F/AM2+ processors + * may be unreliable. */ - return boot_cpu_data.x86 == 0x10 && boot_cpu_data.x86_model <= 2; + pkg_type = cpuid_ebx(0x80000001) & CPUID_PKGTYPE_MASK; + if (pkg_type == CPUID_PKGTYPE_F) + return true; + if (pkg_type != CPUID_PKGTYPE_AM2R2_AM3) + return false; + + /* Differentiate between AM2+ (bad) and AM3 (good) */ + pci_bus_read_config_dword(pdev->bus, + PCI_DEVFN(PCI_SLOT(pdev->devfn), 2), + REG_DCT0_CONFIG_HIGH, ®_dram_cfg); + return !(reg_dram_cfg & DDR3_MODE); } static int __devinit k10temp_probe(struct pci_dev *pdev, @@ -99,9 +124,10 @@ static int __devinit k10temp_probe(struct pci_dev *pdev, { struct device *hwmon_dev; u32 reg_caps, reg_htc; + int unreliable = has_erratum_319(pdev); int err; - if (has_erratum_319() && !force) { + if (unreliable && !force) { dev_err(&pdev->dev, "unreliable CPU thermal sensor; monitoring disabled\n"); err = -ENODEV; @@ -139,7 +165,7 @@ static int __devinit k10temp_probe(struct pci_dev *pdev, } dev_set_drvdata(&pdev->dev, hwmon_dev); - if (has_erratum_319() && force) + if (unreliable && force) dev_warn(&pdev->dev, "unreliable CPU thermal sensor; check erratum 319\n"); return 0; @@ -169,7 +195,7 @@ static void __devexit k10temp_remove(struct pci_dev *pdev) dev_set_drvdata(&pdev->dev, NULL); } -static struct pci_device_id k10temp_id_table[] = { +static const struct pci_device_id k10temp_id_table[] = { { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC) }, { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_11H_NB_MISC) }, {} diff --git a/drivers/hwmon/k8temp.c b/drivers/hwmon/k8temp.c index 1fe9951..0ceb6d6 100644 --- a/drivers/hwmon/k8temp.c +++ b/drivers/hwmon/k8temp.c @@ -136,7 +136,7 @@ static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 1, 0); static SENSOR_DEVICE_ATTR_2(temp4_input, S_IRUGO, show_temp, NULL, 1, 1); static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); -static struct pci_device_id k8temp_ids[] = { +static const struct pci_device_id k8temp_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_MISC) }, { 0 }, }; diff --git a/drivers/hwmon/lm78.c b/drivers/hwmon/lm78.c index cadcbd9..72ff2c4 100644 --- a/drivers/hwmon/lm78.c +++ b/drivers/hwmon/lm78.c @@ -851,17 +851,16 @@ static struct lm78_data *lm78_update_device(struct device *dev) static int __init lm78_isa_found(unsigned short address) { int val, save, found = 0; - - /* We have to request the region in two parts because some - boards declare base+4 to base+7 as a PNP device */ - if (!request_region(address, 4, "lm78")) { - pr_debug("lm78: Failed to request low part of region\n"); - return 0; - } - if (!request_region(address + 4, 4, "lm78")) { - pr_debug("lm78: Failed to request high part of region\n"); - release_region(address, 4); - return 0; + int port; + + /* Some boards declare base+0 to base+7 as a PNP device, some base+4 + * to base+7 and some base+5 to base+6. So we better request each port + * individually for the probing phase. */ + for (port = address; port < address + LM78_EXTENT; port++) { + if (!request_region(port, 1, "lm78")) { + pr_debug("lm78: Failed to request port 0x%x\n", port); + goto release; + } } #define REALLY_SLOW_IO @@ -925,8 +924,8 @@ static int __init lm78_isa_found(unsigned short address) val & 0x80 ? "LM79" : "LM78", (int)address); release: - release_region(address + 4, 4); - release_region(address, 4); + for (port--; port >= address; port--) + release_region(port, 1); return found; } diff --git a/drivers/hwmon/sis5595.c b/drivers/hwmon/sis5595.c index 12f2e70..79c2931 100644 --- a/drivers/hwmon/sis5595.c +++ b/drivers/hwmon/sis5595.c @@ -697,7 +697,7 @@ static struct sis5595_data *sis5595_update_device(struct device *dev) return data; } -static struct pci_device_id sis5595_pci_ids[] = { +static const struct pci_device_id sis5595_pci_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503) }, { 0, } }; diff --git a/drivers/hwmon/smsc47m1.c b/drivers/hwmon/smsc47m1.c index 9ca9781..8fa462f 100644 --- a/drivers/hwmon/smsc47m1.c +++ b/drivers/hwmon/smsc47m1.c @@ -488,7 +488,7 @@ static int __init smsc47m1_find(unsigned short *addr, } /* Restore device to its initial state */ -static void __init smsc47m1_restore(const struct smsc47m1_sio_data *sio_data) +static void smsc47m1_restore(const struct smsc47m1_sio_data *sio_data) { if ((sio_data->activate & 0x01) == 0) { superio_enter(); diff --git a/drivers/hwmon/via686a.c b/drivers/hwmon/via686a.c index 39e82a4..f397ce7 100644 --- a/drivers/hwmon/via686a.c +++ b/drivers/hwmon/via686a.c @@ -767,7 +767,7 @@ static struct via686a_data *via686a_update_device(struct device *dev) return data; } -static struct pci_device_id via686a_pci_ids[] = { +static const struct pci_device_id via686a_pci_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4) }, { 0, } }; diff --git a/drivers/hwmon/vt8231.c b/drivers/hwmon/vt8231.c index 470a122..d47b4c9 100644 --- a/drivers/hwmon/vt8231.c +++ b/drivers/hwmon/vt8231.c @@ -697,7 +697,7 @@ static struct platform_driver vt8231_driver = { .remove = __devexit_p(vt8231_remove), }; -static struct pci_device_id vt8231_pci_ids[] = { +static const struct pci_device_id vt8231_pci_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231_4) }, { 0, } }; diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c index 05f9225..32d4ade 100644 --- a/drivers/hwmon/w83781d.c +++ b/drivers/hwmon/w83781d.c @@ -1793,17 +1793,17 @@ static int __init w83781d_isa_found(unsigned short address) { int val, save, found = 0; - - /* We have to request the region in two parts because some - boards declare base+4 to base+7 as a PNP device */ - if (!request_region(address, 4, "w83781d")) { - pr_debug("w83781d: Failed to request low part of region\n"); - return 0; - } - if (!request_region(address + 4, 4, "w83781d")) { - pr_debug("w83781d: Failed to request high part of region\n"); - release_region(address, 4); - return 0; + int port; + + /* Some boards declare base+0 to base+7 as a PNP device, some base+4 + * to base+7 and some base+5 to base+6. So we better request each port + * individually for the probing phase. */ + for (port = address; port < address + W83781D_EXTENT; port++) { + if (!request_region(port, 1, "w83781d")) { + pr_debug("w83781d: Failed to request port 0x%x\n", + port); + goto release; + } } #define REALLY_SLOW_IO @@ -1877,8 +1877,8 @@ w83781d_isa_found(unsigned short address) val == 0x30 ? "W83782D" : "W83781D", (int)address); release: - release_region(address + 4, 4); - release_region(address, 4); + for (port--; port >= address; port--) + release_region(port, 1); return found; } |