diff options
Diffstat (limited to 'drivers/hwmon')
| -rw-r--r-- | drivers/hwmon/Kconfig | 50 | ||||
| -rw-r--r-- | drivers/hwmon/Makefile | 1 | ||||
| -rw-r--r-- | drivers/hwmon/adm1025.c | 4 | ||||
| -rw-r--r-- | drivers/hwmon/adm1026.c | 6 | ||||
| -rw-r--r-- | drivers/hwmon/adm9240.c | 4 | ||||
| -rw-r--r-- | drivers/hwmon/asb100.c | 4 | ||||
| -rw-r--r-- | drivers/hwmon/atxp1.c | 4 | ||||
| -rw-r--r-- | drivers/hwmon/gl520sm.c | 4 | ||||
| -rw-r--r-- | drivers/hwmon/hwmon-vid.c | 103 | ||||
| -rw-r--r-- | drivers/hwmon/it87.c | 6 | ||||
| -rw-r--r-- | drivers/hwmon/lm85.c | 4 | ||||
| -rw-r--r-- | drivers/hwmon/lm87.c | 4 | ||||
| -rw-r--r-- | drivers/hwmon/pc87360.c | 2 | ||||
| -rw-r--r-- | drivers/hwmon/w83627hf.c | 4 | ||||
| -rw-r--r-- | drivers/hwmon/w83781d.c | 4 | ||||
| -rw-r--r-- | drivers/hwmon/w83792d.c | 1 |
16 files changed, 145 insertions, 60 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 6483ff6..35fe7d1 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -19,10 +19,13 @@ config HWMON This support can also be built as a module. If so, the module will be called hwmon. +config HWMON_VID + tristate + default n + config SENSORS_ADM1021 tristate "Analog Devices ADM1021 and compatibles" depends on HWMON && I2C - select I2C_SENSOR help If you say yes here you get support for Analog Devices ADM1021 and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A, @@ -35,7 +38,7 @@ config SENSORS_ADM1021 config SENSORS_ADM1025 tristate "Analog Devices ADM1025 and compatibles" depends on HWMON && I2C && EXPERIMENTAL - select I2C_SENSOR + select HWMON_VID help If you say yes here you get support for Analog Devices ADM1025 and Philips NE1619 sensor chips. @@ -46,7 +49,7 @@ config SENSORS_ADM1025 config SENSORS_ADM1026 tristate "Analog Devices ADM1026 and compatibles" depends on HWMON && I2C && EXPERIMENTAL - select I2C_SENSOR + select HWMON_VID help If you say yes here you get support for Analog Devices ADM1026 sensor chip. @@ -57,7 +60,6 @@ config SENSORS_ADM1026 config SENSORS_ADM1031 tristate "Analog Devices ADM1031 and compatibles" depends on HWMON && I2C && EXPERIMENTAL - select I2C_SENSOR help If you say yes here you get support for Analog Devices ADM1031 and ADM1030 sensor chips. @@ -68,7 +70,7 @@ config SENSORS_ADM1031 config SENSORS_ADM9240 tristate "Analog Devices ADM9240 and compatibles" depends on HWMON && I2C && EXPERIMENTAL - select I2C_SENSOR + select HWMON_VID help If you say yes here you get support for Analog Devices ADM9240, Dallas DS1780, National Semiconductor LM81 sensor chips. @@ -79,7 +81,7 @@ config SENSORS_ADM9240 config SENSORS_ASB100 tristate "Asus ASB100 Bach" depends on HWMON && I2C && EXPERIMENTAL - select I2C_SENSOR + select HWMON_VID help If you say yes here you get support for the ASB100 Bach sensor chip found on some Asus mainboards. @@ -90,7 +92,7 @@ config SENSORS_ASB100 config SENSORS_ATXP1 tristate "Attansic ATXP1 VID controller" depends on HWMON && I2C && EXPERIMENTAL - select I2C_SENSOR + select HWMON_VID help If you say yes here you get support for the Attansic ATXP1 VID controller. @@ -104,7 +106,6 @@ config SENSORS_ATXP1 config SENSORS_DS1621 tristate "Dallas Semiconductor DS1621 and DS1625" depends on HWMON && I2C && EXPERIMENTAL - select I2C_SENSOR help If you say yes here you get support for Dallas Semiconductor DS1621 and DS1625 sensor chips. @@ -115,7 +116,6 @@ config SENSORS_DS1621 config SENSORS_FSCHER tristate "FSC Hermes" depends on HWMON && I2C && EXPERIMENTAL - select I2C_SENSOR help If you say yes here you get support for Fujitsu Siemens Computers Hermes sensor chips. @@ -126,7 +126,6 @@ config SENSORS_FSCHER config SENSORS_FSCPOS tristate "FSC Poseidon" depends on HWMON && I2C && EXPERIMENTAL - select I2C_SENSOR help If you say yes here you get support for Fujitsu Siemens Computers Poseidon sensor chips. @@ -137,7 +136,6 @@ config SENSORS_FSCPOS config SENSORS_GL518SM tristate "Genesys Logic GL518SM" depends on HWMON && I2C - select I2C_SENSOR help If you say yes here you get support for Genesys Logic GL518SM sensor chips. @@ -148,7 +146,7 @@ config SENSORS_GL518SM config SENSORS_GL520SM tristate "Genesys Logic GL520SM" depends on HWMON && I2C && EXPERIMENTAL - select I2C_SENSOR + select HWMON_VID help If you say yes here you get support for Genesys Logic GL520SM sensor chips. @@ -159,8 +157,8 @@ config SENSORS_GL520SM config SENSORS_IT87 tristate "ITE IT87xx and compatibles" depends on HWMON && I2C - select I2C_SENSOR select I2C_ISA + select HWMON_VID help If you say yes here you get support for ITE IT87xx sensor chips and clones: SiS960. @@ -171,7 +169,6 @@ config SENSORS_IT87 config SENSORS_LM63 tristate "National Semiconductor LM63" depends on HWMON && I2C && EXPERIMENTAL - select I2C_SENSOR help If you say yes here you get support for the National Semiconductor LM63 remote diode digital temperature sensor with integrated fan @@ -184,7 +181,6 @@ config SENSORS_LM63 config SENSORS_LM75 tristate "National Semiconductor LM75 and compatibles" depends on HWMON && I2C - select I2C_SENSOR help If you say yes here you get support for National Semiconductor LM75 sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in @@ -200,7 +196,6 @@ config SENSORS_LM75 config SENSORS_LM77 tristate "National Semiconductor LM77" depends on HWMON && I2C && EXPERIMENTAL - select I2C_SENSOR help If you say yes here you get support for National Semiconductor LM77 sensor chips. @@ -211,7 +206,6 @@ config SENSORS_LM77 config SENSORS_LM78 tristate "National Semiconductor LM78 and compatibles" depends on HWMON && I2C && EXPERIMENTAL - select I2C_SENSOR select I2C_ISA help If you say yes here you get support for National Semiconductor LM78, @@ -223,7 +217,6 @@ config SENSORS_LM78 config SENSORS_LM80 tristate "National Semiconductor LM80" depends on HWMON && I2C && EXPERIMENTAL - select I2C_SENSOR help If you say yes here you get support for National Semiconductor LM80 sensor chips. @@ -234,7 +227,6 @@ config SENSORS_LM80 config SENSORS_LM83 tristate "National Semiconductor LM83" depends on HWMON && I2C - select I2C_SENSOR help If you say yes here you get support for National Semiconductor LM83 sensor chips. @@ -245,7 +237,7 @@ config SENSORS_LM83 config SENSORS_LM85 tristate "National Semiconductor LM85 and compatibles" depends on HWMON && I2C && EXPERIMENTAL - select I2C_SENSOR + select HWMON_VID help If you say yes here you get support for National Semiconductor LM85 sensor chips and clones: ADT7463, EMC6D100, EMC6D102 and ADM1027. @@ -256,7 +248,7 @@ config SENSORS_LM85 config SENSORS_LM87 tristate "National Semiconductor LM87" depends on HWMON && I2C && EXPERIMENTAL - select I2C_SENSOR + select HWMON_VID help If you say yes here you get support for National Semiconductor LM87 sensor chips. @@ -267,7 +259,6 @@ config SENSORS_LM87 config SENSORS_LM90 tristate "National Semiconductor LM90 and compatibles" depends on HWMON && I2C - select I2C_SENSOR help If you say yes here you get support for National Semiconductor LM90, LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657 and @@ -282,7 +273,6 @@ config SENSORS_LM90 config SENSORS_LM92 tristate "National Semiconductor LM92 and compatibles" depends on HWMON && I2C && EXPERIMENTAL - select I2C_SENSOR help If you say yes here you get support for National Semiconductor LM92 and Maxim MAX6635 sensor chips. @@ -293,7 +283,6 @@ config SENSORS_LM92 config SENSORS_MAX1619 tristate "Maxim MAX1619 sensor chip" depends on HWMON && I2C && EXPERIMENTAL - select I2C_SENSOR help If you say yes here you get support for MAX1619 sensor chip. @@ -303,8 +292,8 @@ config SENSORS_MAX1619 config SENSORS_PC87360 tristate "National Semiconductor PC87360 family" depends on HWMON && I2C && EXPERIMENTAL - select I2C_SENSOR select I2C_ISA + select HWMON_VID help If you say yes here you get access to the hardware monitoring functions of the National Semiconductor PC8736x Super-I/O chips. @@ -318,7 +307,6 @@ config SENSORS_PC87360 config SENSORS_SIS5595 tristate "Silicon Integrated Systems Corp. SiS5595" depends on HWMON && I2C && PCI && EXPERIMENTAL - select I2C_SENSOR select I2C_ISA help If you say yes here you get support for the integrated sensors in @@ -330,7 +318,6 @@ config SENSORS_SIS5595 config SENSORS_SMSC47M1 tristate "SMSC LPC47M10x and compatibles" depends on HWMON && I2C && EXPERIMENTAL - select I2C_SENSOR select I2C_ISA help If you say yes here you get support for the integrated fan @@ -343,7 +330,6 @@ config SENSORS_SMSC47M1 config SENSORS_SMSC47B397 tristate "SMSC LPC47B397-NC" depends on HWMON && I2C && EXPERIMENTAL - select I2C_SENSOR select I2C_ISA help If you say yes here you get support for the SMSC LPC47B397-NC @@ -355,7 +341,6 @@ config SENSORS_SMSC47B397 config SENSORS_VIA686A tristate "VIA686A" depends on HWMON && I2C && PCI - select I2C_SENSOR select I2C_ISA help If you say yes here you get support for the integrated sensors in @@ -367,8 +352,8 @@ config SENSORS_VIA686A config SENSORS_W83781D tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F" depends on HWMON && I2C - select I2C_SENSOR select I2C_ISA + select HWMON_VID help If you say yes here you get support for the Winbond W8378x series of sensor chips: the W83781D, W83782D, W83783S and W83627HF, @@ -380,7 +365,6 @@ config SENSORS_W83781D config SENSORS_W83792D tristate "Winbond W83792D" depends on HWMON && I2C && EXPERIMENTAL - select I2C_SENSOR help If you say yes here you get support for the Winbond W83792D chip. @@ -390,7 +374,6 @@ config SENSORS_W83792D config SENSORS_W83L785TS tristate "Winbond W83L785TS-S" depends on HWMON && I2C && EXPERIMENTAL - select I2C_SENSOR help If you say yes here you get support for the Winbond W83L785TS-S sensor chip, which is used on the Asus A7N8X, among other @@ -402,8 +385,8 @@ config SENSORS_W83L785TS config SENSORS_W83627HF tristate "Winbond W83627HF, W83627THF, W83637HF, W83697HF" depends on HWMON && I2C && EXPERIMENTAL - select I2C_SENSOR select I2C_ISA + select HWMON_VID help If you say yes here you get support for the Winbond W836X7 series of sensor chips: the W83627HF, W83627THF, W83637HF, and the W83697HF @@ -414,7 +397,6 @@ config SENSORS_W83627HF config SENSORS_W83627EHF tristate "Winbond W83627EHF" depends on HWMON && I2C && EXPERIMENTAL - select I2C_SENSOR select I2C_ISA help If you say yes here you get preliminary support for the hardware diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 187b89d..381f1bf 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -3,6 +3,7 @@ # obj-$(CONFIG_HWMON) += hwmon.o +obj-$(CONFIG_HWMON_VID) += hwmon-vid.o # asb100, then w83781d go first, as they can override other drivers' addresses. obj-$(CONFIG_SENSORS_ASB100) += asb100.o diff --git a/drivers/hwmon/adm1025.c b/drivers/hwmon/adm1025.c index 229fd0d..526b7ff 100644 --- a/drivers/hwmon/adm1025.c +++ b/drivers/hwmon/adm1025.c @@ -50,8 +50,8 @@ #include <linux/slab.h> #include <linux/jiffies.h> #include <linux/i2c.h> -#include <linux/i2c-vid.h> #include <linux/hwmon.h> +#include <linux/hwmon-vid.h> #include <linux/err.h> /* @@ -473,7 +473,7 @@ static void adm1025_init_client(struct i2c_client *client) struct adm1025_data *data = i2c_get_clientdata(client); int i; - data->vrm = i2c_which_vrm(); + data->vrm = vid_which_vrm(); /* * Set high limits diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c index f32f819..6251581 100644 --- a/drivers/hwmon/adm1026.c +++ b/drivers/hwmon/adm1026.c @@ -28,9 +28,9 @@ #include <linux/slab.h> #include <linux/jiffies.h> #include <linux/i2c.h> -#include <linux/i2c-vid.h> -#include <linux/hwmon-sysfs.h> #include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/hwmon-vid.h> #include <linux/err.h> /* Addresses to scan */ @@ -1552,7 +1552,7 @@ int adm1026_detect(struct i2c_adapter *adapter, int address, goto exitfree; /* Set the VRM version */ - data->vrm = i2c_which_vrm(); + data->vrm = vid_which_vrm(); /* Initialize the ADM1026 chip */ adm1026_init_client(new_client); diff --git a/drivers/hwmon/adm9240.c b/drivers/hwmon/adm9240.c index 0a742cb..bc7faef 100644 --- a/drivers/hwmon/adm9240.c +++ b/drivers/hwmon/adm9240.c @@ -45,8 +45,8 @@ #include <linux/module.h> #include <linux/slab.h> #include <linux/i2c.h> -#include <linux/i2c-vid.h> #include <linux/hwmon.h> +#include <linux/hwmon-vid.h> #include <linux/err.h> /* Addresses to scan */ @@ -657,7 +657,7 @@ static void adm9240_init_client(struct i2c_client *client) u8 conf = adm9240_read_value(client, ADM9240_REG_CONFIG); u8 mode = adm9240_read_value(client, ADM9240_REG_TEMP_CONF) & 3; - data->vrm = i2c_which_vrm(); /* need this to report vid as mV */ + data->vrm = vid_which_vrm(); /* need this to report vid as mV */ dev_info(&client->dev, "Using VRM: %d.%d\n", data->vrm / 10, data->vrm % 10); diff --git a/drivers/hwmon/asb100.c b/drivers/hwmon/asb100.c index 66b0dbd..8e34855 100644 --- a/drivers/hwmon/asb100.c +++ b/drivers/hwmon/asb100.c @@ -39,8 +39,8 @@ #include <linux/module.h> #include <linux/slab.h> #include <linux/i2c.h> -#include <linux/i2c-vid.h> #include <linux/hwmon.h> +#include <linux/hwmon-vid.h> #include <linux/err.h> #include <linux/init.h> #include <linux/jiffies.h> @@ -973,7 +973,7 @@ static void asb100_init_client(struct i2c_client *client) vid = asb100_read_value(client, ASB100_REG_VID_FANDIV) & 0x0f; vid |= (asb100_read_value(client, ASB100_REG_CHIPID) & 0x01) << 4; - data->vrm = i2c_which_vrm(); + data->vrm = vid_which_vrm(); vid = vid_from_reg(vid, data->vrm); /* Start monitoring */ diff --git a/drivers/hwmon/atxp1.c b/drivers/hwmon/atxp1.c index 5cf77e6..deb4d34 100644 --- a/drivers/hwmon/atxp1.c +++ b/drivers/hwmon/atxp1.c @@ -23,8 +23,8 @@ #include <linux/module.h> #include <linux/jiffies.h> #include <linux/i2c.h> -#include <linux/i2c-vid.h> #include <linux/hwmon.h> +#include <linux/hwmon-vid.h> #include <linux/err.h> MODULE_LICENSE("GPL"); @@ -296,7 +296,7 @@ static int atxp1_detect(struct i2c_adapter *adapter, int address, int kind) } /* Get VRM */ - data->vrm = i2c_which_vrm(); + data->vrm = vid_which_vrm(); if ((data->vrm != 90) && (data->vrm != 91)) { dev_err(&new_client->dev, "Not supporting VRM %d.%d\n", diff --git a/drivers/hwmon/gl520sm.c b/drivers/hwmon/gl520sm.c index de6608a..12fd757 100644 --- a/drivers/hwmon/gl520sm.c +++ b/drivers/hwmon/gl520sm.c @@ -26,8 +26,8 @@ #include <linux/slab.h> #include <linux/jiffies.h> #include <linux/i2c.h> -#include <linux/i2c-vid.h> #include <linux/hwmon.h> +#include <linux/hwmon-vid.h> #include <linux/err.h> /* Type of the extra sensor */ @@ -617,7 +617,7 @@ static void gl520_init_client(struct i2c_client *client) conf = oldconf = gl520_read_value(client, GL520_REG_CONF); data->alarm_mask = 0xff; - data->vrm = i2c_which_vrm(); + data->vrm = vid_which_vrm(); if (extra_sensor_type == 1) conf &= ~0x10; diff --git a/drivers/hwmon/hwmon-vid.c b/drivers/hwmon/hwmon-vid.c new file mode 100644 index 0000000..ce475c9 --- /dev/null +++ b/drivers/hwmon/hwmon-vid.c @@ -0,0 +1,103 @@ +/* + hwmon-vid.c - VID/VRM/VRD voltage conversions + + Copyright (c) 2004 Rudolf Marek <r.marek@sh.cvut.cz> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/hwmon-vid.h> + +struct vrm_model { + u8 vendor; + u8 eff_family; + u8 eff_model; + int vrm_type; +}; + +#define ANY 0xFF + +#ifdef CONFIG_X86 + +static struct vrm_model vrm_models[] = { + {X86_VENDOR_AMD, 0x6, ANY, 90}, /* Athlon Duron etc */ + {X86_VENDOR_AMD, 0xF, ANY, 24}, /* Athlon 64, Opteron */ + {X86_VENDOR_INTEL, 0x6, 0x9, 85}, /* 0.13um too */ + {X86_VENDOR_INTEL, 0x6, 0xB, 85}, /* 0xB Tualatin */ + {X86_VENDOR_INTEL, 0x6, ANY, 82}, /* any P6 */ + {X86_VENDOR_INTEL, 0x7, ANY, 0}, /* Itanium */ + {X86_VENDOR_INTEL, 0xF, 0x3, 100}, /* P4 Prescott */ + {X86_VENDOR_INTEL, 0xF, ANY, 90}, /* P4 before Prescott */ + {X86_VENDOR_INTEL, 0x10,ANY, 0}, /* Itanium 2 */ + {X86_VENDOR_UNKNOWN, ANY, ANY, 0} /* stop here */ + }; + +static int find_vrm(u8 eff_family, u8 eff_model, u8 vendor) +{ + int i = 0; + + while (vrm_models[i].vendor!=X86_VENDOR_UNKNOWN) { + if (vrm_models[i].vendor==vendor) + if ((vrm_models[i].eff_family==eff_family)&& \ + ((vrm_models[i].eff_model==eff_model)|| \ + (vrm_models[i].eff_model==ANY))) + return vrm_models[i].vrm_type; + i++; + } + + return 0; +} + +int vid_which_vrm(void) +{ + struct cpuinfo_x86 *c = cpu_data; + u32 eax; + u8 eff_family, eff_model; + int vrm_ret; + + if (c->x86 < 6) return 0; /* any CPU with familly lower than 6 + dont have VID and/or CPUID */ + eax = cpuid_eax(1); + eff_family = ((eax & 0x00000F00)>>8); + eff_model = ((eax & 0x000000F0)>>4); + if (eff_family == 0xF) { /* use extended model & family */ + eff_family += ((eax & 0x00F00000)>>20); + eff_model += ((eax & 0x000F0000)>>16)<<4; + } + vrm_ret = find_vrm(eff_family,eff_model,c->x86_vendor); + if (vrm_ret == 0) + printk(KERN_INFO "hwmon-vid: Unknown VRM version of your" + " x86 CPU\n"); + return vrm_ret; +} + +/* and now for something completely different for Non-x86 world*/ +#else +int vid_which_vrm(void) +{ + printk(KERN_INFO "hwmon-vid: Unknown VRM version of your CPU\n"); + return 0; +} +#endif + +EXPORT_SYMBOL(vid_which_vrm); + +MODULE_AUTHOR("Rudolf Marek <r.marek@sh.cvut.cz>"); + +MODULE_DESCRIPTION("hwmon-vid driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index 8487766..53cc2b6 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -37,9 +37,9 @@ #include <linux/jiffies.h> #include <linux/i2c.h> #include <linux/i2c-isa.h> -#include <linux/i2c-vid.h> -#include <linux/hwmon-sysfs.h> #include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/hwmon-vid.h> #include <linux/err.h> #include <asm/io.h> @@ -919,7 +919,7 @@ int it87_detect(struct i2c_adapter *adapter, int address, int kind) } if (data->type == it8712) { - data->vrm = i2c_which_vrm(); + data->vrm = vid_which_vrm(); device_create_file_vrm(new_client); device_create_file_vid(new_client); } diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c index aeb4788..ab214df 100644 --- a/drivers/hwmon/lm85.c +++ b/drivers/hwmon/lm85.c @@ -28,8 +28,8 @@ #include <linux/slab.h> #include <linux/jiffies.h> #include <linux/i2c.h> -#include <linux/i2c-vid.h> #include <linux/hwmon.h> +#include <linux/hwmon-vid.h> #include <linux/err.h> /* Addresses to scan */ @@ -1147,7 +1147,7 @@ int lm85_detect(struct i2c_adapter *adapter, int address, goto ERROR1; /* Set the VRM version */ - data->vrm = i2c_which_vrm(); + data->vrm = vid_which_vrm(); /* Initialize the LM85 chip */ lm85_init_client(new_client); diff --git a/drivers/hwmon/lm87.c b/drivers/hwmon/lm87.c index d0d2464..dca996d 100644 --- a/drivers/hwmon/lm87.c +++ b/drivers/hwmon/lm87.c @@ -57,8 +57,8 @@ #include <linux/slab.h> #include <linux/jiffies.h> #include <linux/i2c.h> -#include <linux/i2c-vid.h> #include <linux/hwmon.h> +#include <linux/hwmon-vid.h> #include <linux/err.h> /* @@ -694,7 +694,7 @@ static void lm87_init_client(struct i2c_client *client) u8 config; data->channel = lm87_read_value(client, LM87_REG_CHANNEL_MODE); - data->vrm = i2c_which_vrm(); + data->vrm = vid_which_vrm(); config = lm87_read_value(client, LM87_REG_CONFIG); if (!(config & 0x01)) { diff --git a/drivers/hwmon/pc87360.c b/drivers/hwmon/pc87360.c index c66ae4f..08fcb5a 100644 --- a/drivers/hwmon/pc87360.c +++ b/drivers/hwmon/pc87360.c @@ -39,8 +39,8 @@ #include <linux/jiffies.h> #include <linux/i2c.h> #include <linux/i2c-isa.h> -#include <linux/i2c-vid.h> #include <linux/hwmon.h> +#include <linux/hwmon-vid.h> #include <linux/err.h> #include <asm/io.h> diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c index 2d2fcfb..02bd5c0 100644 --- a/drivers/hwmon/w83627hf.c +++ b/drivers/hwmon/w83627hf.c @@ -43,8 +43,8 @@ #include <linux/jiffies.h> #include <linux/i2c.h> #include <linux/i2c-isa.h> -#include <linux/i2c-vid.h> #include <linux/hwmon.h> +#include <linux/hwmon-vid.h> #include <linux/err.h> #include <asm/io.h> #include "lm75.h" @@ -1316,7 +1316,7 @@ static void w83627hf_init_client(struct i2c_client *client) data->vrm = (data->vrm_ovt & 0x01) ? 90 : 82; } else { /* Convert VID to voltage based on default VRM */ - data->vrm = i2c_which_vrm(); + data->vrm = vid_which_vrm(); } tmp = w83627hf_read_value(client, W83781D_REG_SCFG1); diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c index 4760798..4c43337 100644 --- a/drivers/hwmon/w83781d.c +++ b/drivers/hwmon/w83781d.c @@ -39,8 +39,8 @@ #include <linux/jiffies.h> #include <linux/i2c.h> #include <linux/i2c-isa.h> -#include <linux/i2c-vid.h> #include <linux/hwmon.h> +#include <linux/hwmon-vid.h> #include <linux/err.h> #include <asm/io.h> #include "lm75.h" @@ -1478,7 +1478,7 @@ w83781d_init_client(struct i2c_client *client) w83781d_write_value(client, W83781D_REG_BEEP_INTS2, 0); } - data->vrm = i2c_which_vrm(); + data->vrm = vid_which_vrm(); if ((type != w83781d) && (type != as99127f)) { tmp = w83781d_read_value(client, W83781D_REG_SCFG1); diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c index d6d8c0f..ba0c280 100644 --- a/drivers/hwmon/w83792d.c +++ b/drivers/hwmon/w83792d.c @@ -40,7 +40,6 @@ #include <linux/init.h> #include <linux/slab.h> #include <linux/i2c.h> -#include <linux/i2c-vid.h> #include <linux/hwmon.h> #include <linux/hwmon-sysfs.h> #include <linux/err.h> |