aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/hwmon
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/hwmon')
-rw-r--r--drivers/hwmon/Kconfig6
-rw-r--r--drivers/hwmon/ads7871.c38
-rw-r--r--drivers/hwmon/coretemp.c1
-rw-r--r--drivers/hwmon/f71882fg.c83
-rw-r--r--drivers/hwmon/k8temp.c35
5 files changed, 62 insertions, 101 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 0fba829..4d4d09b 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -332,11 +332,11 @@ config SENSORS_F71805F
will be called f71805f.
config SENSORS_F71882FG
- tristate "Fintek F71808E, F71858FG, F71862FG, F71882FG, F71889FG and F8000"
+ tristate "Fintek F71858FG, F71862FG, F71882FG, F71889FG and F8000"
depends on EXPERIMENTAL
help
- If you say yes here you get support for hardware monitoring features
- of the Fintek F71808E, F71858FG, F71862FG/71863FG, F71882FG/F71883FG,
+ If you say yes here you get support for hardware monitoring
+ features of the Fintek F71858FG, F71862FG/71863FG, F71882FG/F71883FG,
F71889FG and F8000 Super-I/O chips.
This driver can also be built as a module. If so, the module
diff --git a/drivers/hwmon/ads7871.c b/drivers/hwmon/ads7871.c
index b300a20..5231934 100644
--- a/drivers/hwmon/ads7871.c
+++ b/drivers/hwmon/ads7871.c
@@ -160,30 +160,12 @@ static const struct attribute_group ads7871_group = {
static int __devinit ads7871_probe(struct spi_device *spi)
{
- int status, ret, err = 0;
+ int ret, err;
uint8_t val;
struct ads7871_data *pdata;
dev_dbg(&spi->dev, "probe\n");
- pdata = kzalloc(sizeof(struct ads7871_data), GFP_KERNEL);
- if (!pdata) {
- err = -ENOMEM;
- goto exit;
- }
-
- status = sysfs_create_group(&spi->dev.kobj, &ads7871_group);
- if (status < 0)
- goto error_free;
-
- pdata->hwmon_dev = hwmon_device_register(&spi->dev);
- if (IS_ERR(pdata->hwmon_dev)) {
- err = PTR_ERR(pdata->hwmon_dev);
- goto error_remove;
- }
-
- spi_set_drvdata(spi, pdata);
-
/* Configure the SPI bus */
spi->mode = (SPI_MODE_0);
spi->bits_per_word = 8;
@@ -201,6 +183,24 @@ static int __devinit ads7871_probe(struct spi_device *spi)
we need to make sure we really have a chip*/
if (val != ret) {
err = -ENODEV;
+ goto exit;
+ }
+
+ pdata = kzalloc(sizeof(struct ads7871_data), GFP_KERNEL);
+ if (!pdata) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ err = sysfs_create_group(&spi->dev.kobj, &ads7871_group);
+ if (err < 0)
+ goto error_free;
+
+ spi_set_drvdata(spi, pdata);
+
+ pdata->hwmon_dev = hwmon_device_register(&spi->dev);
+ if (IS_ERR(pdata->hwmon_dev)) {
+ err = PTR_ERR(pdata->hwmon_dev);
goto error_remove;
}
diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c
index c070c97..de81111 100644
--- a/drivers/hwmon/coretemp.c
+++ b/drivers/hwmon/coretemp.c
@@ -518,7 +518,6 @@ static struct notifier_block coretemp_cpu_notifier __refdata = {
static int __init coretemp_init(void)
{
int i, err = -ENODEV;
- struct pdev_entry *p, *n;
/* quick check if we run Intel */
if (cpu_data(0).x86_vendor != X86_VENDOR_INTEL)
diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c
index 6207120..537841e 100644
--- a/drivers/hwmon/f71882fg.c
+++ b/drivers/hwmon/f71882fg.c
@@ -45,7 +45,6 @@
#define SIO_REG_ADDR 0x60 /* Logical device address (2 bytes) */
#define SIO_FINTEK_ID 0x1934 /* Manufacturers ID */
-#define SIO_F71808_ID 0x0901 /* Chipset ID */
#define SIO_F71858_ID 0x0507 /* Chipset ID */
#define SIO_F71862_ID 0x0601 /* Chipset ID */
#define SIO_F71882_ID 0x0541 /* Chipset ID */
@@ -97,10 +96,9 @@ static unsigned short force_id;
module_param(force_id, ushort, 0);
MODULE_PARM_DESC(force_id, "Override the detected device ID");
-enum chips { f71808fg, f71858fg, f71862fg, f71882fg, f71889fg, f8000 };
+enum chips { f71858fg, f71862fg, f71882fg, f71889fg, f8000 };
static const char *f71882fg_names[] = {
- "f71808fg",
"f71858fg",
"f71862fg",
"f71882fg",
@@ -308,8 +306,8 @@ static struct sensor_device_attribute_2 f71858fg_in_temp_attr[] = {
SENSOR_ATTR_2(temp3_fault, S_IRUGO, show_temp_fault, NULL, 0, 2),
};
-/* In attr common to the f71862fg, f71882fg and f71889fg */
-static struct sensor_device_attribute_2 fxxxx_in_attr[] = {
+/* Temp and in attr common to the f71862fg, f71882fg and f71889fg */
+static struct sensor_device_attribute_2 fxxxx_in_temp_attr[] = {
SENSOR_ATTR_2(in0_input, S_IRUGO, show_in, NULL, 0, 0),
SENSOR_ATTR_2(in1_input, S_IRUGO, show_in, NULL, 0, 1),
SENSOR_ATTR_2(in2_input, S_IRUGO, show_in, NULL, 0, 2),
@@ -319,22 +317,6 @@ static struct sensor_device_attribute_2 fxxxx_in_attr[] = {
SENSOR_ATTR_2(in6_input, S_IRUGO, show_in, NULL, 0, 6),
SENSOR_ATTR_2(in7_input, S_IRUGO, show_in, NULL, 0, 7),
SENSOR_ATTR_2(in8_input, S_IRUGO, show_in, NULL, 0, 8),
-};
-
-/* In attr for the f71808fg */
-static struct sensor_device_attribute_2 f71808_in_attr[] = {
- SENSOR_ATTR_2(in0_input, S_IRUGO, show_in, NULL, 0, 0),
- SENSOR_ATTR_2(in1_input, S_IRUGO, show_in, NULL, 0, 1),
- SENSOR_ATTR_2(in2_input, S_IRUGO, show_in, NULL, 0, 2),
- SENSOR_ATTR_2(in3_input, S_IRUGO, show_in, NULL, 0, 3),
- SENSOR_ATTR_2(in4_input, S_IRUGO, show_in, NULL, 0, 4),
- SENSOR_ATTR_2(in5_input, S_IRUGO, show_in, NULL, 0, 5),
- SENSOR_ATTR_2(in6_input, S_IRUGO, show_in, NULL, 0, 7),
- SENSOR_ATTR_2(in7_input, S_IRUGO, show_in, NULL, 0, 8),
-};
-
-/* Temp attr common to the f71808fg, f71862fg, f71882fg and f71889fg */
-static struct sensor_device_attribute_2 fxxxx_temp_attr[] = {
SENSOR_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0, 1),
SENSOR_ATTR_2(temp1_max, S_IRUGO|S_IWUSR, show_temp_max,
store_temp_max, 0, 1),
@@ -373,10 +355,6 @@ static struct sensor_device_attribute_2 fxxxx_temp_attr[] = {
store_temp_beep, 0, 6),
SENSOR_ATTR_2(temp2_type, S_IRUGO, show_temp_type, NULL, 0, 2),
SENSOR_ATTR_2(temp2_fault, S_IRUGO, show_temp_fault, NULL, 0, 2),
-};
-
-/* Temp and in attr common to the f71862fg, f71882fg and f71889fg */
-static struct sensor_device_attribute_2 f71862_temp_attr[] = {
SENSOR_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 0, 3),
SENSOR_ATTR_2(temp3_max, S_IRUGO|S_IWUSR, show_temp_max,
store_temp_max, 0, 3),
@@ -1011,11 +989,6 @@ static struct f71882fg_data *f71882fg_update_device(struct device *dev)
data->temp_type[1] = 6;
break;
}
- } else if (data->type == f71808fg) {
- reg = f71882fg_read8(data, F71882FG_REG_TEMP_TYPE);
- data->temp_type[1] = (reg & 0x02) ? 2 : 4;
- data->temp_type[2] = (reg & 0x04) ? 2 : 4;
-
} else {
reg2 = f71882fg_read8(data, F71882FG_REG_PECI);
if ((reg2 & 0x03) == 0x01)
@@ -1898,8 +1871,7 @@ static ssize_t store_pwm_auto_point_temp(struct device *dev,
val /= 1000;
- if (data->type == f71889fg
- || data->type == f71808fg)
+ if (data->type == f71889fg)
val = SENSORS_LIMIT(val, -128, 127);
else
val = SENSORS_LIMIT(val, 0, 127);
@@ -2002,28 +1974,8 @@ static int __devinit f71882fg_probe(struct platform_device *pdev)
/* fall through! */
case f71862fg:
err = f71882fg_create_sysfs_files(pdev,
- f71862_temp_attr,
- ARRAY_SIZE(f71862_temp_attr));
- if (err)
- goto exit_unregister_sysfs;
- err = f71882fg_create_sysfs_files(pdev,
- fxxxx_in_attr,
- ARRAY_SIZE(fxxxx_in_attr));
- if (err)
- goto exit_unregister_sysfs;
- err = f71882fg_create_sysfs_files(pdev,
- fxxxx_temp_attr,
- ARRAY_SIZE(fxxxx_temp_attr));
- break;
- case f71808fg:
- err = f71882fg_create_sysfs_files(pdev,
- f71808_in_attr,
- ARRAY_SIZE(f71808_in_attr));
- if (err)
- goto exit_unregister_sysfs;
- err = f71882fg_create_sysfs_files(pdev,
- fxxxx_temp_attr,
- ARRAY_SIZE(fxxxx_temp_attr));
+ fxxxx_in_temp_attr,
+ ARRAY_SIZE(fxxxx_in_temp_attr));
break;
case f8000:
err = f71882fg_create_sysfs_files(pdev,
@@ -2050,7 +2002,6 @@ static int __devinit f71882fg_probe(struct platform_device *pdev)
case f71862fg:
err = (data->pwm_enable & 0x15) != 0x15;
break;
- case f71808fg:
case f71882fg:
case f71889fg:
err = 0;
@@ -2096,7 +2047,6 @@ static int __devinit f71882fg_probe(struct platform_device *pdev)
f8000_auto_pwm_attr,
ARRAY_SIZE(f8000_auto_pwm_attr));
break;
- case f71808fg:
case f71889fg:
for (i = 0; i < nr_fans; i++) {
data->pwm_auto_point_mapping[i] =
@@ -2176,22 +2126,8 @@ static int f71882fg_remove(struct platform_device *pdev)
/* fall through! */
case f71862fg:
f71882fg_remove_sysfs_files(pdev,
- f71862_temp_attr,
- ARRAY_SIZE(f71862_temp_attr));
- f71882fg_remove_sysfs_files(pdev,
- fxxxx_in_attr,
- ARRAY_SIZE(fxxxx_in_attr));
- f71882fg_remove_sysfs_files(pdev,
- fxxxx_temp_attr,
- ARRAY_SIZE(fxxxx_temp_attr));
- break;
- case f71808fg:
- f71882fg_remove_sysfs_files(pdev,
- f71808_in_attr,
- ARRAY_SIZE(f71808_in_attr));
- f71882fg_remove_sysfs_files(pdev,
- fxxxx_temp_attr,
- ARRAY_SIZE(fxxxx_temp_attr));
+ fxxxx_in_temp_attr,
+ ARRAY_SIZE(fxxxx_in_temp_attr));
break;
case f8000:
f71882fg_remove_sysfs_files(pdev,
@@ -2259,9 +2195,6 @@ static int __init f71882fg_find(int sioaddr, unsigned short *address,
devid = force_id ? force_id : superio_inw(sioaddr, SIO_REG_DEVID);
switch (devid) {
- case SIO_F71808_ID:
- sio_data->type = f71808fg;
- break;
case SIO_F71858_ID:
sio_data->type = f71858fg;
break;
diff --git a/drivers/hwmon/k8temp.c b/drivers/hwmon/k8temp.c
index b9bb3e0..39ead2a 100644
--- a/drivers/hwmon/k8temp.c
+++ b/drivers/hwmon/k8temp.c
@@ -143,6 +143,37 @@ static const struct pci_device_id k8temp_ids[] = {
MODULE_DEVICE_TABLE(pci, k8temp_ids);
+static int __devinit is_rev_g_desktop(u8 model)
+{
+ u32 brandidx;
+
+ if (model < 0x69)
+ return 0;
+
+ if (model == 0xc1 || model == 0x6c || model == 0x7c)
+ return 0;
+
+ /*
+ * Differentiate between AM2 and ASB1.
+ * See "Constructing the processor Name String" in "Revision
+ * Guide for AMD NPT Family 0Fh Processors" (33610).
+ */
+ brandidx = cpuid_ebx(0x80000001);
+ brandidx = (brandidx >> 9) & 0x1f;
+
+ /* Single core */
+ if ((model == 0x6f || model == 0x7f) &&
+ (brandidx == 0x7 || brandidx == 0x9 || brandidx == 0xc))
+ return 0;
+
+ /* Dual core */
+ if (model == 0x6b &&
+ (brandidx == 0xb || brandidx == 0xc))
+ return 0;
+
+ return 1;
+}
+
static int __devinit k8temp_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
@@ -179,9 +210,7 @@ static int __devinit k8temp_probe(struct pci_dev *pdev,
"wrong - check erratum #141\n");
}
- if ((model >= 0x69) &&
- !(model == 0xc1 || model == 0x6c || model == 0x7c ||
- model == 0x6b || model == 0x6f || model == 0x7f)) {
+ if (is_rev_g_desktop(model)) {
/*
* RevG desktop CPUs (i.e. no socket S1G1 or
* ASB1 parts) need additional offset,