diff options
Diffstat (limited to 'drivers/net/wireless/b43/phy_a.h')
| -rw-r--r-- | drivers/net/wireless/b43/phy_a.h | 130 |
1 files changed, 130 insertions, 0 deletions
diff --git a/drivers/net/wireless/b43/phy_a.h b/drivers/net/wireless/b43/phy_a.h new file mode 100644 index 0000000..5cfaab7 --- /dev/null +++ b/drivers/net/wireless/b43/phy_a.h @@ -0,0 +1,130 @@ +#ifndef LINUX_B43_PHY_A_H_ +#define LINUX_B43_PHY_A_H_ + +#include "phy_common.h" + + +/* OFDM (A) PHY Registers */ +#define B43_PHY_VERSION_OFDM B43_PHY_OFDM(0x00) /* Versioning register for A-PHY */ +#define B43_PHY_BBANDCFG B43_PHY_OFDM(0x01) /* Baseband config */ +#define B43_PHY_BBANDCFG_RXANT 0x180 /* RX Antenna selection */ +#define B43_PHY_BBANDCFG_RXANT_SHIFT 7 +#define B43_PHY_PWRDOWN B43_PHY_OFDM(0x03) /* Powerdown */ +#define B43_PHY_CRSTHRES1_R1 B43_PHY_OFDM(0x06) /* CRS Threshold 1 (phy.rev 1 only) */ +#define B43_PHY_LNAHPFCTL B43_PHY_OFDM(0x1C) /* LNA/HPF control */ +#define B43_PHY_LPFGAINCTL B43_PHY_OFDM(0x20) /* LPF Gain control */ +#define B43_PHY_ADIVRELATED B43_PHY_OFDM(0x27) /* FIXME rename */ +#define B43_PHY_CRS0 B43_PHY_OFDM(0x29) +#define B43_PHY_CRS0_EN 0x4000 +#define B43_PHY_PEAK_COUNT B43_PHY_OFDM(0x30) +#define B43_PHY_ANTDWELL B43_PHY_OFDM(0x2B) /* Antenna dwell */ +#define B43_PHY_ANTDWELL_AUTODIV1 0x0100 /* Automatic RX diversity start antenna */ +#define B43_PHY_ENCORE B43_PHY_OFDM(0x49) /* "Encore" (RangeMax / BroadRange) */ +#define B43_PHY_ENCORE_EN 0x0200 /* Encore enable */ +#define B43_PHY_LMS B43_PHY_OFDM(0x55) +#define B43_PHY_OFDM61 B43_PHY_OFDM(0x61) /* FIXME rename */ +#define B43_PHY_OFDM61_10 0x0010 /* FIXME rename */ +#define B43_PHY_IQBAL B43_PHY_OFDM(0x69) /* I/Q balance */ +#define B43_PHY_BBTXDC_BIAS B43_PHY_OFDM(0x6B) /* Baseband TX DC bias */ +#define B43_PHY_OTABLECTL B43_PHY_OFDM(0x72) /* OFDM table control (see below) */ +#define B43_PHY_OTABLEOFF 0x03FF /* OFDM table offset (see below) */ +#define B43_PHY_OTABLENR 0xFC00 /* OFDM table number (see below) */ +#define B43_PHY_OTABLENR_SHIFT 10 +#define B43_PHY_OTABLEI B43_PHY_OFDM(0x73) /* OFDM table data I */ +#define B43_PHY_OTABLEQ B43_PHY_OFDM(0x74) /* OFDM table data Q */ +#define B43_PHY_HPWR_TSSICTL B43_PHY_OFDM(0x78) /* Hardware power TSSI control */ +#define B43_PHY_ADCCTL B43_PHY_OFDM(0x7A) /* ADC control */ +#define B43_PHY_IDLE_TSSI B43_PHY_OFDM(0x7B) +#define B43_PHY_A_TEMP_SENSE B43_PHY_OFDM(0x7C) /* A PHY temperature sense */ +#define B43_PHY_NRSSITHRES B43_PHY_OFDM(0x8A) /* NRSSI threshold */ +#define B43_PHY_ANTWRSETT B43_PHY_OFDM(0x8C) /* Antenna WR settle */ +#define B43_PHY_ANTWRSETT_ARXDIV 0x2000 /* Automatic RX diversity enabled */ +#define B43_PHY_CLIPPWRDOWNT B43_PHY_OFDM(0x93) /* Clip powerdown threshold */ +#define B43_PHY_OFDM9B B43_PHY_OFDM(0x9B) /* FIXME rename */ +#define B43_PHY_N1P1GAIN B43_PHY_OFDM(0xA0) +#define B43_PHY_P1P2GAIN B43_PHY_OFDM(0xA1) +#define B43_PHY_N1N2GAIN B43_PHY_OFDM(0xA2) +#define B43_PHY_CLIPTHRES B43_PHY_OFDM(0xA3) +#define B43_PHY_CLIPN1P2THRES B43_PHY_OFDM(0xA4) +#define B43_PHY_CCKSHIFTBITS_WA B43_PHY_OFDM(0xA5) /* CCK shiftbits workaround, FIXME rename */ +#define B43_PHY_CCKSHIFTBITS B43_PHY_OFDM(0xA7) /* FIXME rename */ +#define B43_PHY_DIVSRCHIDX B43_PHY_OFDM(0xA8) /* Divider search gain/index */ +#define B43_PHY_CLIPP2THRES B43_PHY_OFDM(0xA9) +#define B43_PHY_CLIPP3THRES B43_PHY_OFDM(0xAA) +#define B43_PHY_DIVP1P2GAIN B43_PHY_OFDM(0xAB) +#define B43_PHY_DIVSRCHGAINBACK B43_PHY_OFDM(0xAD) /* Divider search gain back */ +#define B43_PHY_DIVSRCHGAINCHNG B43_PHY_OFDM(0xAE) /* Divider search gain change */ +#define B43_PHY_CRSTHRES1 B43_PHY_OFDM(0xC0) /* CRS Threshold 1 (phy.rev >= 2 only) */ +#define B43_PHY_CRSTHRES2 B43_PHY_OFDM(0xC1) /* CRS Threshold 2 (phy.rev >= 2 only) */ +#define B43_PHY_TSSIP_LTBASE B43_PHY_OFDM(0x380) /* TSSI power lookup table base */ +#define B43_PHY_DC_LTBASE B43_PHY_OFDM(0x3A0) /* DC lookup table base */ +#define B43_PHY_GAIN_LTBASE B43_PHY_OFDM(0x3C0) /* Gain lookup table base */ + +/*** OFDM table numbers ***/ +#define B43_OFDMTAB(number, offset) (((number) << B43_PHY_OTABLENR_SHIFT) | (offset)) +#define B43_OFDMTAB_AGC1 B43_OFDMTAB(0x00, 0) +#define B43_OFDMTAB_GAIN0 B43_OFDMTAB(0x00, 0) +#define B43_OFDMTAB_GAINX B43_OFDMTAB(0x01, 0) //TODO rename +#define B43_OFDMTAB_GAIN1 B43_OFDMTAB(0x01, 4) +#define B43_OFDMTAB_AGC3 B43_OFDMTAB(0x02, 0) +#define B43_OFDMTAB_GAIN2 B43_OFDMTAB(0x02, 3) +#define B43_OFDMTAB_LNAHPFGAIN1 B43_OFDMTAB(0x03, 0) +#define B43_OFDMTAB_WRSSI B43_OFDMTAB(0x04, 0) +#define B43_OFDMTAB_LNAHPFGAIN2 B43_OFDMTAB(0x04, 0) +#define B43_OFDMTAB_NOISESCALE B43_OFDMTAB(0x05, 0) +#define B43_OFDMTAB_AGC2 B43_OFDMTAB(0x06, 0) +#define B43_OFDMTAB_ROTOR B43_OFDMTAB(0x08, 0) +#define B43_OFDMTAB_ADVRETARD B43_OFDMTAB(0x09, 0) +#define B43_OFDMTAB_DAC B43_OFDMTAB(0x0C, 0) +#define B43_OFDMTAB_DC B43_OFDMTAB(0x0E, 7) +#define B43_OFDMTAB_PWRDYN2 B43_OFDMTAB(0x0E, 12) +#define B43_OFDMTAB_LNAGAIN B43_OFDMTAB(0x0E, 13) +#define B43_OFDMTAB_UNKNOWN_0F B43_OFDMTAB(0x0F, 0) //TODO rename +#define B43_OFDMTAB_UNKNOWN_APHY B43_OFDMTAB(0x0F, 7) //TODO rename +#define B43_OFDMTAB_LPFGAIN B43_OFDMTAB(0x0F, 12) +#define B43_OFDMTAB_RSSI B43_OFDMTAB(0x10, 0) +#define B43_OFDMTAB_UNKNOWN_11 B43_OFDMTAB(0x11, 4) //TODO rename +#define B43_OFDMTAB_AGC1_R1 B43_OFDMTAB(0x13, 0) +#define B43_OFDMTAB_GAINX_R1 B43_OFDMTAB(0x14, 0) //TODO remove! +#define B43_OFDMTAB_MINSIGSQ B43_OFDMTAB(0x14, 0) +#define B43_OFDMTAB_AGC3_R1 B43_OFDMTAB(0x15, 0) +#define B43_OFDMTAB_WRSSI_R1 B43_OFDMTAB(0x15, 4) +#define B43_OFDMTAB_TSSI B43_OFDMTAB(0x15, 0) +#define B43_OFDMTAB_DACRFPABB B43_OFDMTAB(0x16, 0) +#define B43_OFDMTAB_DACOFF B43_OFDMTAB(0x17, 0) +#define B43_OFDMTAB_DCBIAS B43_OFDMTAB(0x18, 0) + +u16 b43_ofdmtab_read16(struct b43_wldev *dev, u16 table, u16 offset); +void b43_ofdmtab_write16(struct b43_wldev *dev, u16 table, + u16 offset, u16 value); +u32 b43_ofdmtab_read32(struct b43_wldev *dev, u16 table, u16 offset); +void b43_ofdmtab_write32(struct b43_wldev *dev, u16 table, + u16 offset, u32 value); + + +struct b43_phy_a { + /* Pointer to the table used to convert a + * TSSI value to dBm-Q5.2 */ + const s8 *tssi2dbm; + /* Target idle TSSI */ + int tgt_idle_tssi; + /* Current idle TSSI */ + int cur_idle_tssi;//FIXME value currently not set + + /* A-PHY TX Power control value. */ + u16 txpwr_offset; + + //TODO lots of missing stuff +}; + +/** + * b43_phy_inita - Lowlevel A-PHY init routine. + * This is _only_ used by the G-PHY code. + */ +void b43_phy_inita(struct b43_wldev *dev); + + +struct b43_phy_operations; +extern const struct b43_phy_operations b43_phyops_a; + +#endif /* LINUX_B43_PHY_A_H_ */ |