Merge branch 'for-linus' into next

Conflicts:

	drivers/input/mouse/appletouch.c

13 files changed, 162 insertions, 56 deletions

diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index 56857d1..c27537b 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -807,6 +807,8 @@ static int atkbd_activate(struct atkbd *atkbd)
 static void atkbd_cleanup(struct serio *serio)
 {
 	struct atkbd *atkbd = serio_get_drvdata(serio);
+
+	atkbd_disable(atkbd);
 	ps2_command(&atkbd->ps2dev, NULL, ATKBD_CMD_RESET_BAT);
 }
 
diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c
index c7c9599..6f1516f 100644
--- a/drivers/input/keyboard/pxa27x_keypad.c
+++ b/drivers/input/keyboard/pxa27x_keypad.c
@@ -138,6 +138,9 @@ static void pxa27x_keypad_build_keycode(struct pxa27x_keypad *keypad)
 		set_bit(code, input_dev->keybit);
 	}
 
+	for (i = 0; i < pdata->direct_key_num; i++)
+		set_bit(pdata->direct_key_map[i], input_dev->keybit);
+
 	keypad->rotary_up_key[0] = pdata->rotary0_up_key;
 	keypad->rotary_up_key[1] = pdata->rotary1_up_key;
 	keypad->rotary_down_key[0] = pdata->rotary0_down_key;
@@ -145,17 +148,21 @@ static void pxa27x_keypad_build_keycode(struct pxa27x_keypad *keypad)
 	keypad->rotary_rel_code[0] = pdata->rotary0_rel_code;
 	keypad->rotary_rel_code[1] = pdata->rotary1_rel_code;
 
-	if (pdata->rotary0_up_key && pdata->rotary0_down_key) {
-		set_bit(pdata->rotary0_up_key, input_dev->keybit);
-		set_bit(pdata->rotary0_down_key, input_dev->keybit);
-	} else
-		set_bit(pdata->rotary0_rel_code, input_dev->relbit);
-
-	if (pdata->rotary1_up_key && pdata->rotary1_down_key) {
-		set_bit(pdata->rotary1_up_key, input_dev->keybit);
-		set_bit(pdata->rotary1_down_key, input_dev->keybit);
-	} else
-		set_bit(pdata->rotary1_rel_code, input_dev->relbit);
+	if (pdata->enable_rotary0) {
+		if (pdata->rotary0_up_key && pdata->rotary0_down_key) {
+			set_bit(pdata->rotary0_up_key, input_dev->keybit);
+			set_bit(pdata->rotary0_down_key, input_dev->keybit);
+		} else
+			set_bit(pdata->rotary0_rel_code, input_dev->relbit);
+	}
+
+	if (pdata->enable_rotary1) {
+		if (pdata->rotary1_up_key && pdata->rotary1_down_key) {
+			set_bit(pdata->rotary1_up_key, input_dev->keybit);
+			set_bit(pdata->rotary1_down_key, input_dev->keybit);
+		} else
+			set_bit(pdata->rotary1_rel_code, input_dev->relbit);
+	}
 }
 
 static inline unsigned int lookup_matrix_keycode(
@@ -493,8 +500,13 @@ static int __devinit pxa27x_keypad_probe(struct platform_device *pdev)
 	keypad->input_dev = input_dev;
 	input_set_drvdata(input_dev, keypad);
 
-	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) |
-		BIT_MASK(EV_REL);
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
+	if ((keypad->pdata->enable_rotary0 &&
+			keypad->pdata->rotary0_rel_code) ||
+	    (keypad->pdata->enable_rotary1 &&
+			keypad->pdata->rotary1_rel_code)) {
+		input_dev->evbit[0] |= BIT_MASK(EV_REL);
+	}
 
 	pxa27x_keypad_build_keycode(keypad);
 	platform_set_drvdata(pdev, keypad);
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 3ad8bd9..432699d 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -15,7 +15,6 @@ if INPUT_MISC
 config INPUT_PCSPKR
 	tristate "PC Speaker support"
 	depends on PCSPKR_PLATFORM
-	depends on SND_PCSP=n
 	help
 	  Say Y here if you want the standard PC Speaker to be used for
 	  bells and whistles.
diff --git a/drivers/input/misc/apanel.c b/drivers/input/misc/apanel.c
index 9531d8c..d82f7f7 100644
--- a/drivers/input/misc/apanel.c
+++ b/drivers/input/misc/apanel.c
@@ -20,7 +20,6 @@
 #include <linux/module.h>
 #include <linux/ioport.h>
 #include <linux/io.h>
-#include <linux/module.h>
 #include <linux/input-polldev.h>
 #include <linux/i2c.h>
 #include <linux/workqueue.h>
diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c
index 6867c91..1f41ae9 100644
--- a/drivers/input/mouse/appletouch.c
+++ b/drivers/input/mouse/appletouch.c
@@ -564,6 +564,21 @@ static void atp_close(struct input_dev *input)
 	dev->open = 0;
 }
 
+static int atp_handle_geyser(struct atp *dev)
+{
+	struct usb_device *udev = dev->udev;
+
+	if (dev->type != ATP_FOUNTAIN) {
+		/* switch to raw sensor mode */
+		if (atp_geyser_init(udev))
+			return -EIO;
+
+		printk(KERN_INFO "appletouch: Geyser mode initialized.\n");
+	}
+
+	return 0;
+}
+
 static int atp_probe(struct usb_interface *iface,
 		     const struct usb_device_id *id)
 {
@@ -608,14 +623,6 @@ static int atp_probe(struct usb_interface *iface,
 	else
 		dev->datalen = 64;
 
-	if (dev->type != ATP_FOUNTAIN) {
-		/* switch to raw sensor mode */
-		if (atp_geyser_init(udev))
-			goto err_free_devs;
-
-		printk(KERN_INFO "appletouch: Geyser mode initialized.\n");
-	}
-
 	dev->urb = usb_alloc_urb(0, GFP_KERNEL);
 	if (!dev->urb)
 		goto err_free_devs;
@@ -629,6 +636,10 @@ static int atp_probe(struct usb_interface *iface,
 			 usb_rcvintpipe(udev, int_in_endpointAddr),
 			 dev->data, dev->datalen, atp_complete, dev, 1);
 
+	error = atp_handle_geyser(dev);
+	if (error)
+		goto err_free_buffer;
+
 	usb_make_path(udev, dev->phys, sizeof(dev->phys));
 	strlcat(dev->phys, "/input0", sizeof(dev->phys));
 
@@ -721,6 +732,20 @@ static void atp_disconnect(struct usb_interface *iface)
 	printk(KERN_INFO "input: appletouch disconnected\n");
 }
 
+static int atp_recover(struct atp *dev)
+{
+	int error;
+
+	error = atp_handle_geyser(dev);
+	if (error)
+		return error;
+
+	if (dev->open && usb_submit_urb(dev->urb, GFP_ATOMIC))
+		return -EIO;
+
+	return 0;
+}
+
 static int atp_suspend(struct usb_interface *iface, pm_message_t message)
 {
 	struct atp *dev = usb_get_intfdata(iface);
@@ -741,12 +766,20 @@ static int atp_resume(struct usb_interface *iface)
 	return 0;
 }
 
+static int atp_reset_resume(struct usb_interface *iface)
+{
+	struct atp *dev = usb_get_intfdata(iface);
+
+	return atp_recover(dev);
+}
+
 static struct usb_driver atp_driver = {
 	.name		= "appletouch",
 	.probe		= atp_probe,
 	.disconnect	= atp_disconnect,
 	.suspend	= atp_suspend,
 	.resume		= atp_resume,
+	.reset_resume	= atp_reset_resume,
 	.id_table	= atp_table,
 };
 
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index 2289e3a..9818359 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -193,6 +193,13 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = {
 		},
 	},
 	{
+		.ident = "Fujitsu-Siemens Amilo Pro 2030",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "AMILO PRO V2030"),
+		},
+	},
+	{
 		/*
 		 * No data is coming from the touchscreen unless KBC
 		 * is in legacy mode.
@@ -336,6 +343,13 @@ static struct dmi_system_id __initdata i8042_dmi_dritek_table[] = {
 		},
 	},
 	{
+		.ident = "Acer TravelMate 660",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 660"),
+		},
+	},
+	{
 		.ident = "Acer TravelMate 2490",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index 65a74cf..170f71e 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -885,6 +885,20 @@ static long i8042_panic_blink(long count)
 
 #undef DELAY
 
+#ifdef CONFIG_X86
+static void i8042_dritek_enable(void)
+{
+	char param = 0x90;
+	int error;
+
+	error = i8042_command(&param, 0x1059);
+	if (error)
+		printk(KERN_WARNING
+			"Failed to enable DRITEK extension: %d\n",
+			error);
+}
+#endif
+
 #ifdef CONFIG_PM
 /*
  * Here we try to restore the original BIOS settings. We only want to
@@ -938,10 +952,20 @@ static int i8042_resume(struct platform_device *dev)
 	i8042_ctr |= I8042_CTR_AUXDIS | I8042_CTR_KBDDIS;
 	i8042_ctr &= ~(I8042_CTR_AUXINT | I8042_CTR_KBDINT);
 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
-		printk(KERN_ERR "i8042: Can't write CTR to resume\n");
-		return -EIO;
+		printk(KERN_WARNING "i8042: Can't write CTR to resume, retrying...\n");
+		msleep(50);
+		if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
+			printk(KERN_ERR "i8042: CTR write retry failed\n");
+			return -EIO;
+		}
 	}
 
+
+#ifdef CONFIG_X86
+	if (i8042_dritek)
+		i8042_dritek_enable();
+#endif
+
 	if (i8042_mux_present) {
 		if (i8042_set_mux_mode(1, NULL) || i8042_enable_mux_ports())
 			printk(KERN_WARNING
@@ -1160,6 +1184,11 @@ static int __devinit i8042_probe(struct platform_device *dev)
 	if (error)
 		return error;
 
+#ifdef CONFIG_X86
+	if (i8042_dritek)
+		i8042_dritek_enable();
+#endif
+
 	if (!i8042_noaux) {
 		error = i8042_setup_aux();
 		if (error && error != -ENODEV && error != -EBUSY)
@@ -1171,14 +1200,6 @@ static int __devinit i8042_probe(struct platform_device *dev)
 		if (error)
 			goto out_fail;
 	}
-#ifdef CONFIG_X86
-	if (i8042_dritek) {
-		char param = 0x90;
-		error = i8042_command(&param, 0x1059);
-		if (error)
-			goto out_fail;
-	}
-#endif
 /*
  * Ok, everything is ready, let's register all serio ports
  */
diff --git a/drivers/input/tablet/gtco.c b/drivers/input/tablet/gtco.c
index c5a8661..1e748e4 100644
--- a/drivers/input/tablet/gtco.c
+++ b/drivers/input/tablet/gtco.c
@@ -830,7 +830,7 @@ static int gtco_probe(struct usb_interface *usbinterface,
 	struct gtco             *gtco;
 	struct input_dev        *input_dev;
 	struct hid_descriptor   *hid_desc;
-	char                    *report = NULL;
+	char                    *report;
 	int                     result = 0, retry;
 	int			error;
 	struct usb_endpoint_descriptor *endpoint;
@@ -916,12 +916,16 @@ static int gtco_probe(struct usb_interface *usbinterface,
 					 le16_to_cpu(hid_desc->wDescriptorLength),
 					 5000); /* 5 secs */
 
-		if (result == le16_to_cpu(hid_desc->wDescriptorLength))
+		dbg("usb_control_msg result: %d", result);
+		if (result == le16_to_cpu(hid_desc->wDescriptorLength)) {
+			parse_hid_report_descriptor(gtco, report, result);
 			break;
+		}
 	}
 
+	kfree(report);
+
 	/* If we didn't get the report, fail */
-	dbg("usb_control_msg result: :%d", result);
 	if (result != le16_to_cpu(hid_desc->wDescriptorLength)) {
 		err("Failed to get HID Report Descriptor of size: %d",
 		    hid_desc->wDescriptorLength);
@@ -929,12 +933,6 @@ static int gtco_probe(struct usb_interface *usbinterface,
 		goto err_free_urb;
 	}
 
-	/* Now we parse the report */
-	parse_hid_report_descriptor(gtco, report, result);
-
-	/* Now we delete it */
-	kfree(report);
-
 	/* Create a device file node */
 	usb_make_path(gtco->usbdev, gtco->usbpath, sizeof(gtco->usbpath));
 	strlcat(gtco->usbpath, "/input0", sizeof(gtco->usbpath));
@@ -988,7 +986,6 @@ static int gtco_probe(struct usb_interface *usbinterface,
 	usb_buffer_free(gtco->usbdev, REPORT_MAX_SIZE,
 			gtco->buffer, gtco->buf_dma);
  err_free_devs:
-	kfree(report);
 	input_free_device(input_dev);
 	kfree(gtco);
 	return error;
diff --git a/drivers/input/touchscreen/wm9713.c b/drivers/input/touchscreen/wm9713.c
index 01278bd..8384587 100644
--- a/drivers/input/touchscreen/wm9713.c
+++ b/drivers/input/touchscreen/wm9713.c
@@ -85,6 +85,15 @@ module_param(delay, int, 0);
 MODULE_PARM_DESC(delay, "Set adc sample delay.");
 
 /*
+ * Set five_wire = 1 to use a 5 wire touchscreen.
+ *
+ * NOTE: Five wire mode does not allow for readback of pressure.
+ */
+static int five_wire;
+module_param(five_wire, int, 0);
+MODULE_PARM_DESC(five_wire, "Set to '1' to use 5-wire touchscreen.");
+
+/*
  * Set adc mask function.
  *
  * Sources of glitch noise, such as signals driving an LCD display, may feed
@@ -162,6 +171,19 @@ static void wm9713_phy_init(struct wm97xx *wm)
 			 64000 / rpu);
 	}
 
+	/* Five wire panel? */
+	if (five_wire) {
+		dig3 |= WM9713_45W;
+		dev_info(wm->dev, "setting 5-wire touchscreen mode.");
+
+		if (pil) {
+			dev_warn(wm->dev,
+				 "Pressure measurement not supported in 5 "
+				 "wire mode, disabling\n");
+			pil = 0;
+		}
+	}
+
 	/* touchpanel pressure */
 	if (pil == 2) {
 		dig3 |= WM9712_PIL;
diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c
index e9c7ea4..cdc24ad 100644
--- a/drivers/input/touchscreen/wm97xx-core.c
+++ b/drivers/input/touchscreen/wm97xx-core.c
@@ -608,6 +608,17 @@ static int wm97xx_probe(struct device *dev)
 		goto alloc_err;
 	}
 
+	/* set up physical characteristics */
+	wm->codec->phy_init(wm);
+
+	/* load gpio cache */
+	wm->gpio[0] = wm97xx_reg_read(wm, AC97_GPIO_CFG);
+	wm->gpio[1] = wm97xx_reg_read(wm, AC97_GPIO_POLARITY);
+	wm->gpio[2] = wm97xx_reg_read(wm, AC97_GPIO_STICKY);
+	wm->gpio[3] = wm97xx_reg_read(wm, AC97_GPIO_WAKEUP);
+	wm->gpio[4] = wm97xx_reg_read(wm, AC97_GPIO_STATUS);
+	wm->gpio[5] = wm97xx_reg_read(wm, AC97_MISC_AFE);
+
 	wm->input_dev = input_allocate_device();
 	if (wm->input_dev == NULL) {
 		ret = -ENOMEM;
@@ -616,6 +627,7 @@ static int wm97xx_probe(struct device *dev)
 
 	/* set up touch configuration */
 	wm->input_dev->name = "wm97xx touchscreen";
+	wm->input_dev->phys = "wm97xx";
 	wm->input_dev->open = wm97xx_ts_input_open;
 	wm->input_dev->close = wm97xx_ts_input_close;
 	set_bit(EV_ABS, wm->input_dev->evbit);
@@ -634,17 +646,6 @@ static int wm97xx_probe(struct device *dev)
 	if (ret < 0)
 		goto dev_alloc_err;
 
-	/* set up physical characteristics */
-	wm->codec->phy_init(wm);
-
-	/* load gpio cache */
-	wm->gpio[0] = wm97xx_reg_read(wm, AC97_GPIO_CFG);
-	wm->gpio[1] = wm97xx_reg_read(wm, AC97_GPIO_POLARITY);
-	wm->gpio[2] = wm97xx_reg_read(wm, AC97_GPIO_STICKY);
-	wm->gpio[3] = wm97xx_reg_read(wm, AC97_GPIO_WAKEUP);
-	wm->gpio[4] = wm97xx_reg_read(wm, AC97_GPIO_STATUS);
-	wm->gpio[5] = wm97xx_reg_read(wm, AC97_MISC_AFE);
-
 	/* register our battery device */
 	wm->battery_dev = platform_device_alloc("wm97xx-battery", -1);
 	if (!wm->battery_dev) {
@@ -801,7 +802,7 @@ void wm97xx_unregister_mach_ops(struct wm97xx *wm)
 EXPORT_SYMBOL_GPL(wm97xx_unregister_mach_ops);
 
 static struct device_driver wm97xx_driver = {
-	.name =		"ac97",
+	.name =		"wm97xx-ts",
 	.bus =		&ac97_bus_type,
 	.owner =	THIS_MODULE,
 	.probe =	wm97xx_probe,
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index 2e20193..ec15f1d 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -47,6 +47,9 @@ static const struct usb_device_id usb_quirk_list[] = {
 	/* Edirol SD-20 */
 	{ USB_DEVICE(0x0582, 0x0027), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* appletouch */
+	{ USB_DEVICE(0x05ac, 0x021a), .driver_info = USB_QUIRK_RESET_RESUME },
+
 	/* M-Systems Flash Disk Pioneers */
 	{ USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME },
 
diff --git a/include/linux/input.h b/include/linux/input.h
index af9c631..3e86b61 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -639,7 +639,9 @@ struct input_absinfo {
 #define SW_LID			0x00  /* set = lid shut */
 #define SW_TABLET_MODE		0x01  /* set = tablet mode */
 #define SW_HEADPHONE_INSERT	0x02  /* set = inserted */
-#define SW_RADIO		0x03  /* set = radio enabled */
+#define SW_RFKILL_ALL		0x03  /* rfkill master switch, type "any"
+					 set = radio enabled */
+#define SW_RADIO		SW_RFKILL_ALL	/* deprecated */
 #define SW_MAX			0x0f
 #define SW_CNT			(SW_MAX+1)
 
diff --git a/include/linux/wm97xx.h b/include/linux/wm97xx.h
index 4d13732..6f69968 100644
--- a/include/linux/wm97xx.h
+++ b/include/linux/wm97xx.h
@@ -100,6 +100,7 @@
 #define WM9713_ADCSEL_Y		0x0004	/* Y measurement */
 #define WM9713_ADCSEL_PRES	0x0008	/* Pressure measurement */
 #define WM9713_COO		0x0001	/* enable coordinate mode */
+#define WM9713_45W		0x1000  /* set for 5 wire panel */
 #define WM9713_PDEN		0x0800	/* measure only when pen down */
 #define WM9713_ADCSEL_MASK	0x00fe	/* ADC selection mask */
 #define WM9713_WAIT		0x0200	/* coordinate wait */