Merge master.kernel.org:/home/rmk/linux-2.6-arm

172 files changed, 1906 insertions, 1791 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 4b15f5f..16a5d52 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -154,6 +154,7 @@ config ARCH_RPC
 	select FIQ
 	select TIMER_ACORN
 	select ARCH_MAY_HAVE_PC_FDC
+	select ISA_DMA_API
 	help
 	  On the Acorn Risc-PC, Linux can support the internal IDE disk and
 	  CD-ROM interface, serial and parallel port, and the floppy drive.
@@ -206,6 +207,7 @@ config ARCH_IMX
 
 config ARCH_H720X
 	bool "Hynix-HMS720x-based"
+	select ISA_DMA_API
 	help
 	  This enables support for systems based on the Hynix HMS720x
 
@@ -290,12 +292,14 @@ config ISA
 	  (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
 	  newer boards don't support it.  If you have ISA, say Y, otherwise N.
 
+# Select ISA DMA controller support
 config ISA_DMA
 	bool
+	select ISA_DMA_API
 
+# Select ISA DMA interface
 config ISA_DMA_API
 	bool
-	default y
 
 config PCI
 	bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB
@@ -656,7 +660,6 @@ source "kernel/power/Kconfig"
 
 config APM
 	tristate "Advanced Power Management Emulation"
-	depends on PM_LEGACY
 	---help---
 	  APM is a BIOS specification for saving power using several different
 	  techniques. This is mostly useful for battery powered laptops with
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 81bd219..afaf3a1 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -8,7 +8,7 @@
 # Copyright (C) 1995-2001 by Russell King
 
 LDFLAGS_vmlinux	:=-p --no-undefined -X
-CPPFLAGS_vmlinux.lds = -DKERNEL_RAM_ADDR=$(TEXTADDR)
+CPPFLAGS_vmlinux.lds = -DTEXT_OFFSET=$(TEXT_OFFSET)
 OBJCOPYFLAGS	:=-O binary -R .note -R .comment -S
 GZFLAGS		:=-9
 #CFLAGS		+=-pipe
@@ -65,7 +65,7 @@ CHECKFLAGS	+= -D__arm__
 
 #Default value
 head-y		:= arch/arm/kernel/head.o arch/arm/kernel/init_task.o
-textaddr-y	:= 0xC0008000
+textofs-y	:= 0x00008000
 
  machine-$(CONFIG_ARCH_RPC)	   := rpc
  machine-$(CONFIG_ARCH_EBSA110)	   := ebsa110
@@ -73,22 +73,20 @@ textaddr-y	:= 0xC0008000
   incdir-$(CONFIG_ARCH_CLPS7500)   := cl7500
  machine-$(CONFIG_FOOTBRIDGE)	   := footbridge
   incdir-$(CONFIG_FOOTBRIDGE)	   := ebsa285
-textaddr-$(CONFIG_ARCH_CO285)	   := 0x60008000
  machine-$(CONFIG_ARCH_CO285)	   := footbridge
   incdir-$(CONFIG_ARCH_CO285)	   := ebsa285
  machine-$(CONFIG_ARCH_SHARK)	   := shark
  machine-$(CONFIG_ARCH_SA1100)	   := sa1100
 ifeq ($(CONFIG_ARCH_SA1100),y)
 # SA1111 DMA bug: we don't want the kernel to live in precious DMA-able memory
-textaddr-$(CONFIG_SA1111)	   := 0xc0208000
+ textofs-$(CONFIG_SA1111)	   := 0x00208000
 endif
  machine-$(CONFIG_ARCH_PXA)	   := pxa
  machine-$(CONFIG_ARCH_L7200)	   := l7200
  machine-$(CONFIG_ARCH_INTEGRATOR) := integrator
  machine-$(CONFIG_ARCH_CAMELOT)	   := epxa10db
-textaddr-$(CONFIG_ARCH_CLPS711X)   := 0xc0028000
+ textofs-$(CONFIG_ARCH_CLPS711X)   := 0x00028000
  machine-$(CONFIG_ARCH_CLPS711X)   := clps711x
-textaddr-$(CONFIG_ARCH_FORTUNET)   := 0xc0008000
  machine-$(CONFIG_ARCH_IOP3XX)	   := iop3xx
  machine-$(CONFIG_ARCH_IXP4XX)	   := ixp4xx
  machine-$(CONFIG_ARCH_IXP2000)    := ixp2000
@@ -110,7 +108,8 @@ CFLAGS_3c589_cs.o :=-DISA_SIXTEEN_BIT_PERIPHERAL
 export CFLAGS_3c589_cs.o
 endif
 
-TEXTADDR := $(textaddr-y)
+# The byte offset of the kernel image in RAM from the start of RAM.
+TEXT_OFFSET := $(textofs-y)
 
 ifeq ($(incdir-y),)
 incdir-y := $(machine-y)
@@ -123,7 +122,7 @@ else
 MACHINE  :=
 endif
   
-export	TEXTADDR GZFLAGS
+export	TEXT_OFFSET GZFLAGS
 
 # Do we have FASTFPE?
 FASTFPE		:=arch/arm/fastfpe
diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
index 937a353..a174d63 100644
--- a/arch/arm/boot/Makefile
+++ b/arch/arm/boot/Makefile
@@ -15,7 +15,7 @@ include $(srctree)/$(MACHINE)/Makefile.boot
 endif
 
 # Note: the following conditions must always be true:
-#   ZRELADDR == virt_to_phys(TEXTADDR)
+#   ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET)
 #   PARAMS_PHYS must be within 4MB of ZRELADDR
 #   INITRD_PHYS must be in RAM
 ZRELADDR    := $(zreladdr-y)
diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
index 666ba39..d7509c7 100644
--- a/arch/arm/common/Kconfig
+++ b/arch/arm/common/Kconfig
@@ -23,5 +23,8 @@ config SHARP_LOCOMO
 config SHARP_PARAM
 	bool
 
+config SHARPSL_PM
+	bool
+
 config SHARP_SCOOP
 	bool
diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
index a878865..ec8d17c 100644
--- a/arch/arm/common/Makefile
+++ b/arch/arm/common/Makefile
@@ -3,7 +3,6 @@
 #
 
 obj-y				+= rtctime.o
-obj-$(CONFIG_ARM_AMBA)		+= amba.o
 obj-$(CONFIG_ARM_GIC)		+= gic.o
 obj-$(CONFIG_ICST525)		+= icst525.o
 obj-$(CONFIG_ICST307)		+= icst307.o
@@ -13,4 +12,5 @@ obj-$(CONFIG_DMABOUNCE)		+= dmabounce.o
 obj-$(CONFIG_TIMER_ACORN)	+= time-acorn.o
 obj-$(CONFIG_SHARP_LOCOMO)	+= locomo.o
 obj-$(CONFIG_SHARP_PARAM)	+= sharpsl_param.o
+obj-$(CONFIG_SHARPSL_PM)	+= sharpsl_pm.o
 obj-$(CONFIG_SHARP_SCOOP)	+= scoop.o
diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c
index 0c3cbd9..b6de43e 100644
--- a/arch/arm/common/scoop.c
+++ b/arch/arm/common/scoop.c
@@ -33,7 +33,6 @@ void reset_scoop(struct device *dev)
 
 	SCOOP_REG(sdev->base,SCOOP_MCR) = 0x0100;  // 00
 	SCOOP_REG(sdev->base,SCOOP_CDR) = 0x0000;  // 04
-	SCOOP_REG(sdev->base,SCOOP_CPR) = 0x0000;  // 0C
 	SCOOP_REG(sdev->base,SCOOP_CCR) = 0x0000;  // 10
 	SCOOP_REG(sdev->base,SCOOP_IMR) = 0x0000;  // 18
 	SCOOP_REG(sdev->base,SCOOP_IRM) = 0x00FF;  // 14
@@ -154,6 +153,7 @@ int __init scoop_probe(struct platform_device *pdev)
 
 	SCOOP_REG(devptr->base, SCOOP_MCR) = 0x0140;
 	reset_scoop(&pdev->dev);
+	SCOOP_REG(devptr->base, SCOOP_CPR) = 0x0000;
 	SCOOP_REG(devptr->base, SCOOP_GPCR) = inf->io_dir & 0xffff;
 	SCOOP_REG(devptr->base, SCOOP_GPWR) = inf->io_out & 0xffff;
 
diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c
new file mode 100644
index 0000000..978d32e
--- /dev/null
+++ b/arch/arm/common/sharpsl_pm.c
@@ -0,0 +1,839 @@
+/*
+ * Battery and Power Management code for the Sharp SL-C7xx and SL-Cxx00
+ * series of PDAs
+ *
+ * Copyright (c) 2004-2005 Richard Purdie
+ *
+ * Based on code written by Sharp for 2.4 kernels
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#undef DEBUG
+
+#include <linux/module.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/apm_bios.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/apm.h>
+#include <asm/arch/pm.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/sharpsl.h>
+#include <asm/hardware/sharpsl_pm.h>
+
+/*
+ * Constants
+ */
+#define SHARPSL_CHARGE_ON_TIME_INTERVAL        (msecs_to_jiffies(1*60*1000))  /* 1 min */
+#define SHARPSL_CHARGE_FINISH_TIME             (msecs_to_jiffies(10*60*1000)) /* 10 min */
+#define SHARPSL_BATCHK_TIME                    (msecs_to_jiffies(15*1000))    /* 15 sec */
+#define SHARPSL_BATCHK_TIME_SUSPEND            (60*10)                        /* 10 min */
+#define SHARPSL_WAIT_CO_TIME                   15  /* 15 sec */
+#define SHARPSL_WAIT_DISCHARGE_ON              100 /* 100 msec */
+#define SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP   10  /* 10 msec */
+#define SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT   10  /* 10 msec */
+#define SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN   10  /* 10 msec */
+#define SHARPSL_CHARGE_WAIT_TIME               15  /* 15 msec */
+#define SHARPSL_CHARGE_CO_CHECK_TIME           5   /* 5 msec */
+#define SHARPSL_CHARGE_RETRY_CNT               1   /* eqv. 10 min */
+
+#define SHARPSL_CHARGE_ON_VOLT         0x99  /* 2.9V */
+#define SHARPSL_CHARGE_ON_TEMP         0xe0  /* 2.9V */
+#define SHARPSL_CHARGE_ON_ACIN_HIGH    0x9b  /* 6V */
+#define SHARPSL_CHARGE_ON_ACIN_LOW     0x34  /* 2V */
+#define SHARPSL_FATAL_ACIN_VOLT        182   /* 3.45V */
+#define SHARPSL_FATAL_NOACIN_VOLT      170   /* 3.40V */
+
+/*
+ * Prototypes
+ */
+static int sharpsl_off_charge_battery(void);
+static int sharpsl_check_battery_temp(void);
+static int sharpsl_check_battery_voltage(void);
+static int sharpsl_ac_check(void);
+static int sharpsl_fatal_check(void);
+static int sharpsl_average_value(int ad);
+static void sharpsl_average_clear(void);
+static void sharpsl_charge_toggle(void *private_);
+static void sharpsl_battery_thread(void *private_);
+
+
+/*
+ * Variables
+ */
+struct sharpsl_pm_status sharpsl_pm;
+DECLARE_WORK(toggle_charger, sharpsl_charge_toggle, NULL);
+DECLARE_WORK(sharpsl_bat, sharpsl_battery_thread, NULL);
+
+
+static int get_percentage(int voltage)
+{
+	int i = sharpsl_pm.machinfo->bat_levels - 1;
+	struct battery_thresh *thresh;
+
+	if (sharpsl_pm.charge_mode == CHRG_ON)
+		thresh=sharpsl_pm.machinfo->bat_levels_acin;
+	else
+		thresh=sharpsl_pm.machinfo->bat_levels_noac;
+
+	while (i > 0 && (voltage > thresh[i].voltage))
+		i--;
+
+	return thresh[i].percentage;
+}
+
+static int get_apm_status(int voltage)
+{
+	int low_thresh, high_thresh;
+
+	if (sharpsl_pm.charge_mode == CHRG_ON) {
+		high_thresh = sharpsl_pm.machinfo->status_high_acin;
+		low_thresh = sharpsl_pm.machinfo->status_low_acin;
+	} else {
+		high_thresh = sharpsl_pm.machinfo->status_high_noac;
+		low_thresh = sharpsl_pm.machinfo->status_low_noac;
+	}
+
+	if (voltage >= high_thresh)
+		return APM_BATTERY_STATUS_HIGH;
+	if (voltage >= low_thresh)
+		return APM_BATTERY_STATUS_LOW;
+	return APM_BATTERY_STATUS_CRITICAL;
+}
+
+void sharpsl_battery_kick(void)
+{
+	schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(125));
+}
+EXPORT_SYMBOL(sharpsl_battery_kick);
+
+
+static void sharpsl_battery_thread(void *private_)
+{
+	int voltage, percent, apm_status, i = 0;
+
+	if (!sharpsl_pm.machinfo)
+		return;
+
+	sharpsl_pm.battstat.ac_status = (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN) ? APM_AC_ONLINE : APM_AC_OFFLINE);
+
+	/* Corgi cannot confirm when battery fully charged so periodically kick! */
+	if (machine_is_corgi() && (sharpsl_pm.charge_mode == CHRG_ON)
+			&& time_after(jiffies, sharpsl_pm.charge_start_time +  SHARPSL_CHARGE_ON_TIME_INTERVAL))
+		schedule_work(&toggle_charger);
+
+	while(1) {
+		voltage = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
+
+		if (voltage > 0) break;
+		if (i++ > 5) {
+			voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage;
+			dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n");
+			break;
+		}
+	}
+
+	voltage = sharpsl_average_value(voltage);
+	apm_status = get_apm_status(voltage);
+	percent = get_percentage(voltage);
+
+	/* At low battery voltages, the voltage has a tendency to start
+           creeping back up so we try to avoid this here */
+	if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE) || (apm_status == APM_BATTERY_STATUS_HIGH) ||  percent <= sharpsl_pm.battstat.mainbat_percent) {
+		sharpsl_pm.battstat.mainbat_voltage = voltage;
+		sharpsl_pm.battstat.mainbat_status = apm_status;
+		sharpsl_pm.battstat.mainbat_percent = percent;
+	}
+
+	dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %d\n", voltage,
+			sharpsl_pm.battstat.mainbat_status, sharpsl_pm.battstat.mainbat_percent, jiffies);
+
+	/* If battery is low. limit backlight intensity to save power. */
+	if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
+			&& ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW) ||
+			(sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) {
+		if (!(sharpsl_pm.flags & SHARPSL_BL_LIMIT)) {
+			corgibl_limit_intensity(1);
+			sharpsl_pm.flags |= SHARPSL_BL_LIMIT;
+		}
+	} else if (sharpsl_pm.flags & SHARPSL_BL_LIMIT) {
+		corgibl_limit_intensity(0);
+		sharpsl_pm.flags &= ~SHARPSL_BL_LIMIT;
+	}
+
+	/* Suspend if critical battery level */
+	if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
+			&& (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL)
+			&& !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) {
+		sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
+		dev_err(sharpsl_pm.dev, "Fatal Off\n");
+		apm_queue_event(APM_CRITICAL_SUSPEND);
+	}
+
+	schedule_delayed_work(&sharpsl_bat, SHARPSL_BATCHK_TIME);
+}
+
+void sharpsl_pm_led(int val)
+{
+	if (val == SHARPSL_LED_ERROR) {
+		dev_err(sharpsl_pm.dev, "Charging Error!\n");
+	} else if (val == SHARPSL_LED_ON) {
+		dev_dbg(sharpsl_pm.dev, "Charge LED On\n");
+
+	} else {
+		dev_dbg(sharpsl_pm.dev, "Charge LED Off\n");
+
+	}
+}
+
+static void sharpsl_charge_on(void)
+{
+	dev_dbg(sharpsl_pm.dev, "Turning Charger On\n");
+
+	sharpsl_pm.full_count = 0;
+	sharpsl_pm.charge_mode = CHRG_ON;
+	schedule_delayed_work(&toggle_charger, msecs_to_jiffies(250));
+	schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(500));
+}
+
+static void sharpsl_charge_off(void)
+{
+	dev_dbg(sharpsl_pm.dev, "Turning Charger Off\n");
+
+	sharpsl_pm.machinfo->charge(0);
+	sharpsl_pm_led(SHARPSL_LED_OFF);
+	sharpsl_pm.charge_mode = CHRG_OFF;
+
+	schedule_work(&sharpsl_bat);
+}
+
+static void sharpsl_charge_error(void)
+{
+	sharpsl_pm_led(SHARPSL_LED_ERROR);
+	sharpsl_pm.machinfo->charge(0);
+	sharpsl_pm.charge_mode = CHRG_ERROR;
+}
+
+static void sharpsl_charge_toggle(void *private_)
+{
+	dev_dbg(sharpsl_pm.dev, "Toogling Charger at time: %lx\n", jiffies);
+
+	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
+		sharpsl_charge_off();
+		return;
+	} else if ((sharpsl_check_battery_temp() < 0) || (sharpsl_ac_check() < 0)) {
+		sharpsl_charge_error();
+		return;
+	}
+
+	sharpsl_pm_led(SHARPSL_LED_ON);
+	sharpsl_pm.machinfo->charge(0);
+	mdelay(SHARPSL_CHARGE_WAIT_TIME);
+	sharpsl_pm.machinfo->charge(1);
+
+	sharpsl_pm.charge_start_time = jiffies;
+}
+
+static void sharpsl_ac_timer(unsigned long data)
+{
+	int acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
+
+	dev_dbg(sharpsl_pm.dev, "AC Status: %d\n",acin);
+
+	sharpsl_average_clear();
+	if (acin && (sharpsl_pm.charge_mode != CHRG_ON))
+		sharpsl_charge_on();
+	else if (sharpsl_pm.charge_mode == CHRG_ON)
+		sharpsl_charge_off();
+
+	schedule_work(&sharpsl_bat);
+}
+
+
+irqreturn_t sharpsl_ac_isr(int irq, void *dev_id, struct pt_regs *fp)
+{
+	/* Delay the event slightly to debounce */
+	/* Must be a smaller delay than the chrg_full_isr below */
+	mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
+
+	return IRQ_HANDLED;
+}
+
+static void sharpsl_chrg_full_timer(unsigned long data)
+{
+	dev_dbg(sharpsl_pm.dev, "Charge Full at time: %lx\n", jiffies);
+
+	sharpsl_pm.full_count++;
+
+	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
+		dev_dbg(sharpsl_pm.dev, "Charge Full: AC removed - stop charging!\n");
+		if (sharpsl_pm.charge_mode == CHRG_ON)
+			sharpsl_charge_off();
+	} else if (sharpsl_pm.full_count < 2) {
+		dev_dbg(sharpsl_pm.dev, "Charge Full: Count too low\n");
+		schedule_work(&toggle_charger);
+	} else if (time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_FINISH_TIME)) {
+		dev_dbg(sharpsl_pm.dev, "Charge Full: Interrupt generated too slowly - retry.\n");
+		schedule_work(&toggle_charger);
+	} else {
+		sharpsl_charge_off();
+		sharpsl_pm.charge_mode = CHRG_DONE;
+		dev_dbg(sharpsl_pm.dev, "Charge Full: Charging Finished\n");
+	}
+}
+
+/* Charging Finished Interrupt (Not present on Corgi) */
+/* Can trigger at the same time as an AC staus change so
+   delay until after that has been processed */
+irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id, struct pt_regs *fp)
+{
+	if (sharpsl_pm.flags & SHARPSL_SUSPENDED)
+		return IRQ_HANDLED;
+
+	/* delay until after any ac interrupt */
+	mod_timer(&sharpsl_pm.chrg_full_timer, jiffies + msecs_to_jiffies(500));
+
+	return IRQ_HANDLED;
+}
+
+irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id, struct pt_regs *fp)
+{
+	int is_fatal = 0;
+
+	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) {
+		dev_err(sharpsl_pm.dev, "Battery now Unlocked! Suspending.\n");
+		is_fatal = 1;
+	}
+
+	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_FATAL)) {
+		dev_err(sharpsl_pm.dev, "Fatal Batt Error! Suspending.\n");
+		is_fatal = 1;
+	}
+
+	if (!(sharpsl_pm.flags & SHARPSL_APM_QUEUED) && is_fatal) {
+		sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
+		apm_queue_event(APM_CRITICAL_SUSPEND);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Maintain an average of the last 10 readings
+ */
+#define SHARPSL_CNV_VALUE_NUM    10
+static int sharpsl_ad_index;
+
+static void sharpsl_average_clear(void)
+{
+	sharpsl_ad_index = 0;
+}
+
+static int sharpsl_average_value(int ad)
+{
+	int i, ad_val = 0;
+	static int sharpsl_ad[SHARPSL_CNV_VALUE_NUM+1];
+
+	if (sharpsl_pm.battstat.mainbat_status != APM_BATTERY_STATUS_HIGH) {
+		sharpsl_ad_index = 0;
+		return ad;
+	}
+
+	sharpsl_ad[sharpsl_ad_index] = ad;
+	sharpsl_ad_index++;
+	if (sharpsl_ad_index >= SHARPSL_CNV_VALUE_NUM) {
+		for (i=0; i < (SHARPSL_CNV_VALUE_NUM-1); i++)
+			sharpsl_ad[i] = sharpsl_ad[i+1];
+		sharpsl_ad_index = SHARPSL_CNV_VALUE_NUM - 1;
+	}
+	for (i=0; i < sharpsl_ad_index; i++)
+		ad_val += sharpsl_ad[i];
+
+	return (ad_val / sharpsl_ad_index);
+}
+
+/*
+ * Take an array of 5 integers, remove the maximum and minimum values
+ * and return the average.
+ */
+static int get_select_val(int *val)
+{
+	int i, j, k, temp, sum = 0;
+
+	/* Find MAX val */
+	temp = val[0];
+	j=0;
+	for (i=1; i<5; i++) {
+		if (temp < val[i]) {
+			temp = val[i];
+			j = i;
+		}
+	}
+
+	/* Find MIN val */
+	temp = val[4];
+	k=4;
+	for (i=3; i>=0; i--) {
+		if (temp > val[i]) {
+			temp = val[i];
+			k = i;
+		}
+	}
+
+	for (i=0; i<5; i++)
+		if (i != j && i != k )
+			sum += val[i];
+
+	dev_dbg(sharpsl_pm.dev, "Average: %d from values: %d, %d, %d, %d, %d\n", sum/3, val[0], val[1], val[2], val[3], val[4]);
+
+	return (sum/3);
+}
+
+static int sharpsl_check_battery_temp(void)
+{
+	int val, i, buff[5];
+
+	/* Check battery temperature */
+	for (i=0; i<5; i++) {
+		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
+		sharpsl_pm.machinfo->measure_temp(1);
+		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
+		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_TEMP);
+		sharpsl_pm.machinfo->measure_temp(0);
+	}
+
+	val = get_select_val(buff);
+
+	dev_dbg(sharpsl_pm.dev, "Temperature: %d\n", val);
+	if (val > SHARPSL_CHARGE_ON_TEMP)
+		return -1;
+
+	return 0;
+}
+
+static int sharpsl_check_battery_voltage(void)
+{
+	int val, i, buff[5];
+
+	/* disable charge, enable discharge */
+	sharpsl_pm.machinfo->charge(0);
+	sharpsl_pm.machinfo->discharge(1);
+	mdelay(SHARPSL_WAIT_DISCHARGE_ON);
+
+	if (sharpsl_pm.machinfo->discharge1)
+		sharpsl_pm.machinfo->discharge1(1);
+
+	/* Check battery voltage */
+	for (i=0; i<5; i++) {
+		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
+		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
+	}
+
+	if (sharpsl_pm.machinfo->discharge1)
+		sharpsl_pm.machinfo->discharge1(0);
+
+	sharpsl_pm.machinfo->discharge(0);
+
+	val = get_select_val(buff);
+	dev_dbg(sharpsl_pm.dev, "Battery Voltage: %d\n", val);
+
+	if (val < SHARPSL_CHARGE_ON_VOLT)
+		return -1;
+
+	return 0;
+}
+
+static int sharpsl_ac_check(void)
+{
+	int temp, i, buff[5];
+
+	for (i=0; i<5; i++) {
+		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_ACIN_VOLT);
+		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN);
+	}
+
+	temp = get_select_val(buff);
+	dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n",temp);
+
+	if ((temp > SHARPSL_CHARGE_ON_ACIN_HIGH) || (temp < SHARPSL_CHARGE_ON_ACIN_LOW)) {
+		dev_err(sharpsl_pm.dev, "Error: AC check failed.\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int sharpsl_pm_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	sharpsl_pm.flags |= SHARPSL_SUSPENDED;
+	flush_scheduled_work();
+
+	if (sharpsl_pm.charge_mode == CHRG_ON)
+		sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG;
+	else
+		sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
+
+	return 0;
+}
+
+static int sharpsl_pm_resume(struct platform_device *pdev)
+{
+	/* Clear the reset source indicators as they break the bootloader upon reboot */
+	RCSR = 0x0f;
+	sharpsl_average_clear();
+	sharpsl_pm.flags &= ~SHARPSL_APM_QUEUED;
+	sharpsl_pm.flags &= ~SHARPSL_SUSPENDED;
+
+	return 0;
+}
+
+static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
+{
+	dev_dbg(sharpsl_pm.dev, "Time is: %08x\n",RCNR);
+
+	dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n",sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG);
+	/* not charging and AC-IN! */
+
+	if ((sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG) && (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN))) {
+		dev_dbg(sharpsl_pm.dev, "Activating Offline Charger...\n");
+		sharpsl_pm.charge_mode = CHRG_OFF;
+		sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
+		sharpsl_off_charge_battery();
+	}
+
+	sharpsl_pm.machinfo->presuspend();
+
+	PEDR = 0xffffffff; /* clear it */
+
+	sharpsl_pm.flags &= ~SHARPSL_ALARM_ACTIVE;
+	if ((sharpsl_pm.charge_mode == CHRG_ON) && ((alarm_enable && ((alarm_time - RCNR) > (SHARPSL_BATCHK_TIME_SUSPEND + 30))) || !alarm_enable)) {
+		RTSR &= RTSR_ALE;
+		RTAR = RCNR + SHARPSL_BATCHK_TIME_SUSPEND;
+		dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n",RTAR);
+		sharpsl_pm.flags |= SHARPSL_ALARM_ACTIVE;
+	} else if (alarm_enable) {
+		RTSR &= RTSR_ALE;
+		RTAR = alarm_time;
+		dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n",RTAR);
+	} else {
+		dev_dbg(sharpsl_pm.dev, "No alarms set.\n");
+	}
+
+	pxa_pm_enter(state);
+
+	sharpsl_pm.machinfo->postsuspend();
+
+	dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n",PEDR);
+}
+
+static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
+{
+	if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable) )
+	{
+		if (!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE)) {
+			dev_dbg(sharpsl_pm.dev, "No user triggered wakeup events and not charging. Strange. Suspend.\n");
+			corgi_goto_sleep(alarm_time, alarm_enable, state);
+			return 1;
+		}
+		if(sharpsl_off_charge_battery()) {
+			dev_dbg(sharpsl_pm.dev, "Charging. Suspend...\n");
+			corgi_goto_sleep(alarm_time, alarm_enable, state);
+			return 1;
+		}
+		dev_dbg(sharpsl_pm.dev, "User triggered wakeup in offline charger.\n");
+	}
+
+	if ((!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) || (sharpsl_fatal_check() < 0) )
+	{
+		dev_err(sharpsl_pm.dev, "Fatal condition. Suspend.\n");
+		corgi_goto_sleep(alarm_time, alarm_enable, state);
+		return 1;
+	}
+
+	return 0;
+}
+
+static int corgi_pxa_pm_enter(suspend_state_t state)
+{
+	unsigned long alarm_time = RTAR;
+	unsigned int alarm_status = ((RTSR & RTSR_ALE) != 0);
+
+	dev_dbg(sharpsl_pm.dev, "SharpSL suspending for first time.\n");
+
+	corgi_goto_sleep(alarm_time, alarm_status, state);
+
+	while (corgi_enter_suspend(alarm_time,alarm_status,state))
+		{}
+
+	dev_dbg(sharpsl_pm.dev, "SharpSL resuming...\n");
+
+	return 0;
+}
+#endif
+
+
+/*
+ * Check for fatal battery errors
+ * Fatal returns -1
+ */
+static int sharpsl_fatal_check(void)
+{
+	int buff[5], temp, i, acin;
+
+	dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check entered\n");
+
+	/* Check AC-Adapter */
+	acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
+
+	if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) {
+		sharpsl_pm.machinfo->charge(0);
+		udelay(100);
+		sharpsl_pm.machinfo->discharge(1);	/* enable discharge */
+		mdelay(SHARPSL_WAIT_DISCHARGE_ON);
+	}
+
+	if (sharpsl_pm.machinfo->discharge1)
+		sharpsl_pm.machinfo->discharge1(1);
+
+	/* Check battery : check inserting battery ? */
+	for (i=0; i<5; i++) {
+		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
+		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
+	}
+
+	if (sharpsl_pm.machinfo->discharge1)
+		sharpsl_pm.machinfo->discharge1(0);
+
+	if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) {
+		udelay(100);
+		sharpsl_pm.machinfo->charge(1);
+		sharpsl_pm.machinfo->discharge(0);
+	}
+
+	temp = get_select_val(buff);
+	dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check: acin: %d, discharge voltage: %d, no discharge: %d\n", acin, temp, sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT));
+
+	if ((acin && (temp < SHARPSL_FATAL_ACIN_VOLT)) ||
+			(!acin && (temp < SHARPSL_FATAL_NOACIN_VOLT)))
+		return -1;
+	return 0;
+}
+
+static int sharpsl_off_charge_error(void)
+{
+	dev_err(sharpsl_pm.dev, "Offline Charger: Error occured.\n");
+	sharpsl_pm.machinfo->charge(0);
+	sharpsl_pm_led(SHARPSL_LED_ERROR);
+	sharpsl_pm.charge_mode = CHRG_ERROR;
+	return 1;
+}
+
+/*
+ * Charging Control while suspended
+ * Return 1 - go straight to sleep
+ * Return 0 - sleep or wakeup depending on other factors
+ */
+static int sharpsl_off_charge_battery(void)
+{
+	int time;
+
+	dev_dbg(sharpsl_pm.dev, "Charge Mode: %d\n", sharpsl_pm.charge_mode);
+
+	if (sharpsl_pm.charge_mode == CHRG_OFF) {
+		dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 1\n");
+
+		/* AC Check */
+		if ((sharpsl_ac_check() < 0) || (sharpsl_check_battery_temp() < 0))
+			return sharpsl_off_charge_error();
+
+		/* Start Charging */
+		sharpsl_pm_led(SHARPSL_LED_ON);
+		sharpsl_pm.machinfo->charge(0);
+		mdelay(SHARPSL_CHARGE_WAIT_TIME);
+		sharpsl_pm.machinfo->charge(1);
+
+		sharpsl_pm.charge_mode = CHRG_ON;
+		sharpsl_pm.full_count = 0;
+
+		return 1;
+	} else if (sharpsl_pm.charge_mode != CHRG_ON) {
+		return 1;
+	}
+
+	if (sharpsl_pm.full_count == 0) {
+		int time;
+
+		dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 2\n");
+
+		if ((sharpsl_check_battery_temp() < 0) || (sharpsl_check_battery_voltage() < 0))
+			return sharpsl_off_charge_error();
+
+		sharpsl_pm.machinfo->charge(0);
+		mdelay(SHARPSL_CHARGE_WAIT_TIME);
+		sharpsl_pm.machinfo->charge(1);
+		sharpsl_pm.charge_mode = CHRG_ON;
+
+		mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
+
+		time = RCNR;
+		while(1) {
+			/* Check if any wakeup event had occured */
+			if (sharpsl_pm.machinfo->charger_wakeup() != 0)
+				return 0;
+			/* Check for timeout */
+			if ((RCNR - time) > SHARPSL_WAIT_CO_TIME)
+				return 1;
+			if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) {
+				dev_dbg(sharpsl_pm.dev, "Offline Charger: Charge full occured. Retrying to check\n");
+	   			sharpsl_pm.full_count++;
+				sharpsl_pm.machinfo->charge(0);
+				mdelay(SHARPSL_CHARGE_WAIT_TIME);
+				sharpsl_pm.machinfo->charge(1);
+				return 1;
+			}
+		}
+	}
+
+	dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 3\n");
+
+	mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
+
+	time = RCNR;
+	while(1) {
+		/* Check if any wakeup event had occured */
+		if (sharpsl_pm.machinfo->charger_wakeup() != 0)
+			return 0;
+		/* Check for timeout */
+		if ((RCNR-time) > SHARPSL_WAIT_CO_TIME) {
+			if (sharpsl_pm.full_count > SHARPSL_CHARGE_RETRY_CNT) {
+				dev_dbg(sharpsl_pm.dev, "Offline Charger: Not charged sufficiently. Retrying.\n");
+				sharpsl_pm.full_count = 0;
+			}
+			sharpsl_pm.full_count++;
+			return 1;
+		}
+		if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) {
+			dev_dbg(sharpsl_pm.dev, "Offline Charger: Charging complete.\n");
+			sharpsl_pm_led(SHARPSL_LED_OFF);
+			sharpsl_pm.machinfo->charge(0);
+			sharpsl_pm.charge_mode = CHRG_DONE;
+			return 1;
+		}
+	}
+}
+
+
+static ssize_t battery_percentage_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_percent);
+}
+
+static ssize_t battery_voltage_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_voltage);
+}
+
+static DEVICE_ATTR(battery_percentage, 0444, battery_percentage_show, NULL);
+static DEVICE_ATTR(battery_voltage, 0444, battery_voltage_show, NULL);
+
+extern void (*apm_get_power_status)(struct apm_power_info *);
+
+static void sharpsl_apm_get_power_status(struct apm_power_info *info)
+{
+	info->ac_line_status = sharpsl_pm.battstat.ac_status;
+
+	if (sharpsl_pm.charge_mode == CHRG_ON)
+		info->battery_status = APM_BATTERY_STATUS_CHARGING;
+	else
+		info->battery_status = sharpsl_pm.battstat.mainbat_status;
+
+	info->battery_flag = (1 << info->battery_status);
+	info->battery_life = sharpsl_pm.battstat.mainbat_percent;
+}
+
+static struct pm_ops sharpsl_pm_ops = {
+	.pm_disk_mode	= PM_DISK_FIRMWARE,
+	.prepare	= pxa_pm_prepare,
+	.enter		= corgi_pxa_pm_enter,
+	.finish		= pxa_pm_finish,
+};
+
+static int __init sharpsl_pm_probe(struct platform_device *pdev)
+{
+	if (!pdev->dev.platform_data)
+		return -EINVAL;
+
+	sharpsl_pm.dev = &pdev->dev;
+	sharpsl_pm.machinfo = pdev->dev.platform_data;
+	sharpsl_pm.charge_mode = CHRG_OFF;
+	sharpsl_pm.flags = 0;
+
+	init_timer(&sharpsl_pm.ac_timer);
+	sharpsl_pm.ac_timer.function = sharpsl_ac_timer;
+
+	init_timer(&sharpsl_pm.chrg_full_timer);
+	sharpsl_pm.chrg_full_timer.function = sharpsl_chrg_full_timer;
+
+	sharpsl_pm.machinfo->init();
+
+	device_create_file(&pdev->dev, &dev_attr_battery_percentage);
+	device_create_file(&pdev->dev, &dev_attr_battery_voltage);
+
+	apm_get_power_status = sharpsl_apm_get_power_status;
+
+	pm_set_ops(&sharpsl_pm_ops);
+
+	mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
+
+	return 0;
+}
+
+static int sharpsl_pm_remove(struct platform_device *pdev)
+{
+	pm_set_ops(NULL);
+
+	device_remove_file(&pdev->dev, &dev_attr_battery_percentage);
+	device_remove_file(&pdev->dev, &dev_attr_battery_voltage);
+
+	sharpsl_pm.machinfo->exit();
+
+	del_timer_sync(&sharpsl_pm.chrg_full_timer);
+	del_timer_sync(&sharpsl_pm.ac_timer);
+
+	return 0;
+}
+
+static struct platform_driver sharpsl_pm_driver = {
+	.probe		= sharpsl_pm_probe,
+	.remove		= sharpsl_pm_remove,
+	.suspend	= sharpsl_pm_suspend,
+	.resume		= sharpsl_pm_resume,
+	.driver		= {
+		.name		= "sharpsl-pm",
+	},
+};
+
+static int __devinit sharpsl_pm_init(void)
+{
+	return platform_driver_register(&sharpsl_pm_driver);
+}
+
+static void sharpsl_pm_exit(void)
+{
+ 	platform_driver_unregister(&sharpsl_pm_driver);
+}
+
+late_initcall(sharpsl_pm_init);
+module_exit(sharpsl_pm_exit);
diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig
index f74c926..613afab 100644
--- a/arch/arm/configs/ixp4xx_defconfig
+++ b/arch/arm/configs/ixp4xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc1-git5
-# Tue Sep 20 17:26:28 2005
+# Linux kernel version: 2.6.15
+# Tue Jan  3 03:20:40 2006
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
@@ -33,6 +33,7 @@ CONFIG_SYSCTL=y
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
@@ -42,7 +43,6 @@ CONFIG_BUG=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
@@ -62,6 +62,23 @@ CONFIG_MODVERSIONS=y
 CONFIG_KMOD=y
 
 #
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
 # System Type
 #
 # CONFIG_ARCH_CLPS7500 is not set
@@ -83,6 +100,7 @@ CONFIG_ARCH_IXP4XX=y
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_OMAP is not set
 # CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_AAEC2000 is not set
@@ -102,6 +120,7 @@ CONFIG_MACH_IXDPG425=y
 CONFIG_MACH_IXDP465=y
 CONFIG_ARCH_IXCDP1100=y
 CONFIG_ARCH_PRPMC1100=y
+CONFIG_MACH_NAS100D=y
 CONFIG_ARCH_IXDP4XX=y
 CONFIG_CPU_IXP46X=y
 # CONFIG_MACH_GTWX5715 is not set
@@ -155,6 +174,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -173,6 +193,7 @@ CONFIG_CMDLINE="console=ttyS0,115200 ip=bootp root=/dev/nfs"
 # At least one emulation must be selected
 #
 CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
 # CONFIG_FPE_FASTFPE is not set
 
 #
@@ -187,6 +208,8 @@ CONFIG_BINFMT_ELF=y
 # Power management options
 #
 CONFIG_PM=y
+CONFIG_PM_LEGACY=y
+# CONFIG_PM_DEBUG is not set
 CONFIG_APM=y
 
 #
@@ -271,6 +294,10 @@ CONFIG_IP_VS_SH=m
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
 # CONFIG_NETFILTER_NETLINK is not set
 
 #
@@ -286,6 +313,7 @@ CONFIG_IP_NF_IRC=m
 # CONFIG_IP_NF_NETBIOS_NS is not set
 # CONFIG_IP_NF_TFTP is not set
 # CONFIG_IP_NF_AMANDA is not set
+# CONFIG_IP_NF_PPTP is not set
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_LIMIT=m
@@ -319,6 +347,7 @@ CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_TARGET_TCPMSS=m
+# CONFIG_IP_NF_TARGET_NFQUEUE is not set
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
@@ -380,10 +409,18 @@ CONFIG_ECONET=m
 CONFIG_ECONET_AUNUDP=y
 CONFIG_ECONET_NATIVE=y
 CONFIG_WAN_ROUTER=m
+
+#
+# QoS and/or fair queueing
+#
 CONFIG_NET_SCHED=y
 CONFIG_NET_SCH_CLK_JIFFIES=y
 # CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
 # CONFIG_NET_SCH_CLK_CPU is not set
+
+#
+# Queueing/Scheduling
+#
 CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_HTB=m
 # CONFIG_NET_SCH_HFSC is not set
@@ -397,8 +434,10 @@ CONFIG_NET_SCH_GRED=m
 CONFIG_NET_SCH_DSMARK=m
 # CONFIG_NET_SCH_NETEM is not set
 CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
+
+#
+# Classification
+#
 CONFIG_NET_CLS=y
 # CONFIG_NET_CLS_BASIC is not set
 CONFIG_NET_CLS_TCINDEX=m
@@ -407,13 +446,14 @@ CONFIG_NET_CLS_ROUTE=y
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
 # CONFIG_CLS_U32_PERF is not set
-# CONFIG_NET_CLS_IND is not set
 # CONFIG_CLS_U32_MARK is not set
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
 # CONFIG_NET_EMATCH is not set
 # CONFIG_NET_CLS_ACT is not set
 CONFIG_NET_CLS_POLICE=y
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_ESTIMATOR=y
 
 #
 # Network testing
@@ -437,6 +477,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_DEBUG_DRIVER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
 # Memory Technology Devices (MTD)
 #
 CONFIG_MTD=y
@@ -458,6 +503,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -492,7 +538,6 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
 # CONFIG_MTD_PHYSMAP is not set
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_IXP4XX=y
-# CONFIG_MTD_EDB7312 is not set
 # CONFIG_MTD_PCI is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -523,6 +568,11 @@ CONFIG_MTD_NAND_IDS=m
 # CONFIG_MTD_NAND_NANDSIM is not set
 
 #
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
 # Parallel port support
 #
 # CONFIG_PARPORT is not set
@@ -548,14 +598,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
 
 #
@@ -668,6 +710,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
@@ -739,6 +782,7 @@ CONFIG_NET_RADIO=y
 #
 # Wireless 802.11b ISA/PCI cards support
 #
+# CONFIG_AIRO is not set
 CONFIG_HERMES=y
 # CONFIG_PLX_HERMES is not set
 # CONFIG_TMD_HERMES is not set
@@ -782,6 +826,7 @@ CONFIG_WAN_ROUTER_DRIVERS=y
 #
 # ATM drivers
 #
+# CONFIG_ATM_DUMMY is not set
 CONFIG_ATM_TCP=m
 # CONFIG_ATM_LANAI is not set
 # CONFIG_ATM_ENI is not set
@@ -902,6 +947,7 @@ CONFIG_IXP4XX_WATCHDOG=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -954,6 +1000,7 @@ CONFIG_SENSORS_EEPROM=y
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_RTC8564 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -1036,6 +1083,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
 #
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
@@ -1110,6 +1161,7 @@ CONFIG_RAMFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
@@ -1190,7 +1242,9 @@ CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
 CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_DEBUG_USER is not set
 # CONFIG_DEBUG_WAITQ is not set
 CONFIG_DEBUG_ERRORS=y
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index c11169b..de94b0f 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -2,15 +2,16 @@
 # Makefile for the linux kernel.
 #
 
-AFLAGS_head.o := -DKERNEL_RAM_ADDR=$(TEXTADDR)
+AFLAGS_head.o := -DTEXT_OFFSET=$(TEXT_OFFSET)
 
 # Object file lists.
 
-obj-y		:= compat.o dma.o entry-armv.o entry-common.o irq.o \
+obj-y		:= compat.o entry-armv.o entry-common.o irq.o \
 		   process.o ptrace.o semaphore.o setup.o signal.o sys_arm.o \
 		   time.o traps.o
 
 obj-$(CONFIG_APM)		+= apm.o
+obj-$(CONFIG_ISA_DMA_API)	+= dma.o
 obj-$(CONFIG_ARCH_ACORN)	+= ecard.o 
 obj-$(CONFIG_FOOTBRIDGE)	+= isa.o
 obj-$(CONFIG_FIQ)		+= fiq.o
diff --git a/arch/arm/kernel/apm.c b/arch/arm/kernel/apm.c
index a2843be..b9df1b7 100644
--- a/arch/arm/kernel/apm.c
+++ b/arch/arm/kernel/apm.c
@@ -20,7 +20,6 @@
 #include <linux/apm_bios.h>
 #include <linux/sched.h>
 #include <linux/pm.h>
-#include <linux/pm_legacy.h>
 #include <linux/device.h>
 #include <linux/kernel.h>
 #include <linux/list.h>
@@ -81,6 +80,7 @@ struct apm_user {
  */
 static int suspends_pending;
 static int apm_disabled;
+static int arm_apm_active;
 
 static DECLARE_WAIT_QUEUE_HEAD(apm_waitqueue);
 static DECLARE_WAIT_QUEUE_HEAD(apm_suspend_waitqueue);
@@ -477,9 +477,9 @@ static int kapmd(void *arg)
 		apm_event_t event;
 
 		wait_event_interruptible(kapmd_wait,
-				!queue_empty(&kapmd_queue) || !pm_active);
+				!queue_empty(&kapmd_queue) || !arm_apm_active);
 
-		if (!pm_active)
+		if (!arm_apm_active)
 			break;
 
 		spin_lock_irq(&kapmd_queue_lock);
@@ -522,16 +522,11 @@ static int __init apm_init(void)
 		return -ENODEV;
 	}
 
-	if (PM_IS_ACTIVE()) {
-		printk(KERN_NOTICE "apm: overridden by ACPI.\n");
-		return -EINVAL;
-	}
-
-	pm_active = 1;
+	arm_apm_active = 1;
 
 	ret = kernel_thread(kapmd, NULL, CLONE_KERNEL);
 	if (ret < 0) {
-		pm_active = 0;
+		arm_apm_active = 0;
 		return ret;
 	}
 
@@ -543,7 +538,7 @@ static int __init apm_init(void)
 	if (ret != 0) {
 		remove_proc_entry("apm", NULL);
 
-		pm_active = 0;
+		arm_apm_active = 0;
 		wake_up(&kapmd_wait);
 		wait_for_completion(&kapmd_exit);
 	}
@@ -556,7 +551,7 @@ static void __exit apm_exit(void)
 	misc_deregister(&apm_device);
 	remove_proc_entry("apm", NULL);
 
-	pm_active = 0;
+	arm_apm_active = 0;
 	wake_up(&kapmd_wait);
 	wait_for_completion(&kapmd_exit);
 }
diff --git a/arch/arm/kernel/dma-isa.c b/arch/arm/kernel/dma-isa.c
index e9a3630..0353276 100644
--- a/arch/arm/kernel/dma-isa.c
+++ b/arch/arm/kernel/dma-isa.c
@@ -18,7 +18,7 @@
  */
 #include <linux/ioport.h>
 #include <linux/init.h>
-#include <linux/pci.h>
+#include <linux/dma-mapping.h>
 
 #include <asm/dma.h>
 #include <asm/io.h>
@@ -65,37 +65,41 @@ static void isa_enable_dma(dmach_t channel, dma_t *dma)
 {
 	if (dma->invalid) {
 		unsigned long address, length;
-		unsigned int mode, direction;
+		unsigned int mode;
+		enum dma_data_direction direction;
 
 		mode = channel & 3;
 		switch (dma->dma_mode & DMA_MODE_MASK) {
 		case DMA_MODE_READ:
 			mode |= ISA_DMA_MODE_READ;
-			direction = PCI_DMA_FROMDEVICE;
+			direction = DMA_FROM_DEVICE;
 			break;
 
 		case DMA_MODE_WRITE:
 			mode |= ISA_DMA_MODE_WRITE;
-			direction = PCI_DMA_TODEVICE;
+			direction = DMA_TO_DEVICE;
 			break;
 
 		case DMA_MODE_CASCADE:
 			mode |= ISA_DMA_MODE_CASCADE;
-			direction = PCI_DMA_BIDIRECTIONAL;
+			direction = DMA_BIDIRECTIONAL;
 			break;
 
 		default:
-			direction = PCI_DMA_NONE;
+			direction = DMA_NONE;
 			break;
 		}
 
-		if (!dma->using_sg) {
+		if (!dma->sg) {
 			/*
 			 * Cope with ISA-style drivers which expect cache
 			 * coherence.
 			 */
-			dma->buf.dma_address = pci_map_single(NULL,
-				dma->buf.__address, dma->buf.length,
+			dma->sg = &dma->buf;
+			dma->sgcount = 1;
+			dma->buf.length = dma->count;
+			dma->buf.dma_address = dma_map_single(NULL,
+				dma->addr, dma->count,
 				direction);
 		}
 
diff --git a/arch/arm/kernel/dma.c b/arch/arm/kernel/dma.c
index 2b78838..5a0f4bc 100644
--- a/arch/arm/kernel/dma.c
+++ b/arch/arm/kernel/dma.c
@@ -12,8 +12,6 @@
  *  DMA facilities.
  */
 #include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/mman.h>
 #include <linux/init.h>
 #include <linux/spinlock.h>
 #include <linux/errno.h>
@@ -23,8 +21,7 @@
 #include <asm/mach/dma.h>
 
 DEFINE_SPINLOCK(dma_spin_lock);
-
-#if MAX_DMA_CHANNELS > 0
+EXPORT_SYMBOL(dma_spin_lock);
 
 static dma_t dma_chan[MAX_DMA_CHANNELS];
 
@@ -81,6 +78,7 @@ bad_dma:
 busy:
 	return -EBUSY;
 }
+EXPORT_SYMBOL(request_dma);
 
 /*
  * Free DMA channel
@@ -112,6 +110,7 @@ void free_dma(dmach_t channel)
 bad_dma:
 	printk(KERN_ERR "dma: trying to free DMA%d\n", channel);
 }
+EXPORT_SYMBOL(free_dma);
 
 /* Set DMA Scatter-Gather list
  */
@@ -125,15 +124,15 @@ void set_dma_sg (dmach_t channel, struct scatterlist *sg, int nr_sg)
 
 	dma->sg = sg;
 	dma->sgcount = nr_sg;
-	dma->using_sg = 1;
 	dma->invalid = 1;
 }
+EXPORT_SYMBOL(set_dma_sg);
 
 /* Set DMA address
  *
  * Copy address to the structure, and set the invalid bit
  */
-void set_dma_addr (dmach_t channel, unsigned long physaddr)
+void __set_dma_addr (dmach_t channel, void *addr)
 {
 	dma_t *dma = dma_chan + channel;
 
@@ -141,12 +140,11 @@ void set_dma_addr (dmach_t channel, unsigned long physaddr)
 		printk(KERN_ERR "dma%d: altering DMA address while "
 		       "DMA active\n", channel);
 
-	dma->sg = &dma->buf;
-	dma->sgcount = 1;
-	dma->buf.__address = bus_to_virt(physaddr);
-	dma->using_sg = 0;
+	dma->sg = NULL;
+	dma->addr = addr;
 	dma->invalid = 1;
 }
+EXPORT_SYMBOL(__set_dma_addr);
 
 /* Set DMA byte count
  *
@@ -160,12 +158,11 @@ void set_dma_count (dmach_t channel, unsigned long count)
 		printk(KERN_ERR "dma%d: altering DMA count while "
 		       "DMA active\n", channel);
 
-	dma->sg = &dma->buf;
-	dma->sgcount = 1;
-	dma->buf.length = count;
-	dma->using_sg = 0;
+	dma->sg = NULL;
+	dma->count = count;
 	dma->invalid = 1;
 }
+EXPORT_SYMBOL(set_dma_count);
 
 /* Set DMA direction mode
  */
@@ -180,6 +177,7 @@ void set_dma_mode (dmach_t channel, dmamode_t mode)
 	dma->dma_mode = mode;
 	dma->invalid = 1;
 }
+EXPORT_SYMBOL(set_dma_mode);
 
 /* Enable DMA channel
  */
@@ -200,6 +198,7 @@ free_dma:
 	printk(KERN_ERR "dma%d: trying to enable free DMA\n", channel);
 	BUG();
 }
+EXPORT_SYMBOL(enable_dma);
 
 /* Disable DMA channel
  */
@@ -220,6 +219,7 @@ free_dma:
 	printk(KERN_ERR "dma%d: trying to disable free DMA\n", channel);
 	BUG();
 }
+EXPORT_SYMBOL(disable_dma);
 
 /*
  * Is the specified DMA channel active?
@@ -233,6 +233,7 @@ void set_dma_page(dmach_t channel, char pagenr)
 {
 	printk(KERN_ERR "dma%d: trying to set_dma_page\n", channel);
 }
+EXPORT_SYMBOL(set_dma_page);
 
 void set_dma_speed(dmach_t channel, int cycle_ns)
 {
@@ -243,6 +244,7 @@ void set_dma_speed(dmach_t channel, int cycle_ns)
 		ret = dma->d_ops->setspeed(channel, dma, cycle_ns);
 	dma->speed = ret;
 }
+EXPORT_SYMBOL(set_dma_speed);
 
 int get_dma_residue(dmach_t channel)
 {
@@ -254,49 +256,12 @@ int get_dma_residue(dmach_t channel)
 
 	return ret;
 }
+EXPORT_SYMBOL(get_dma_residue);
 
-void __init init_dma(void)
+static int __init init_dma(void)
 {
 	arch_dma_init(dma_chan);
-}
-
-#else
-
-int request_dma(dmach_t channel, const char *device_id)
-{
-	return -EINVAL;
-}
-
-int get_dma_residue(dmach_t channel)
-{
 	return 0;
 }
 
-#define GLOBAL_ALIAS(_a,_b) asm (".set " #_a "," #_b "; .globl " #_a)
-GLOBAL_ALIAS(disable_dma, get_dma_residue);
-GLOBAL_ALIAS(enable_dma, get_dma_residue);
-GLOBAL_ALIAS(free_dma, get_dma_residue);
-GLOBAL_ALIAS(get_dma_list, get_dma_residue);
-GLOBAL_ALIAS(set_dma_mode, get_dma_residue);
-GLOBAL_ALIAS(set_dma_page, get_dma_residue);
-GLOBAL_ALIAS(set_dma_count, get_dma_residue);
-GLOBAL_ALIAS(set_dma_addr, get_dma_residue);
-GLOBAL_ALIAS(set_dma_sg, get_dma_residue);
-GLOBAL_ALIAS(set_dma_speed, get_dma_residue);
-GLOBAL_ALIAS(init_dma, get_dma_residue);
-
-#endif
-
-EXPORT_SYMBOL(request_dma);
-EXPORT_SYMBOL(free_dma);
-EXPORT_SYMBOL(enable_dma);
-EXPORT_SYMBOL(disable_dma);
-EXPORT_SYMBOL(set_dma_addr);
-EXPORT_SYMBOL(set_dma_count);
-EXPORT_SYMBOL(set_dma_mode);
-EXPORT_SYMBOL(set_dma_page);
-EXPORT_SYMBOL(get_dma_residue);
-EXPORT_SYMBOL(set_dma_sg);
-EXPORT_SYMBOL(set_dma_speed);
-
-EXPORT_SYMBOL(dma_spin_lock);
+core_initcall(init_dma);
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 2a8d27e..a52baed 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -18,8 +18,6 @@
 #include <asm/memory.h>
 #include <asm/glue.h>
 #include <asm/vfpmacros.h>
-#include <asm/hardware.h>		/* should be moved into entry-macro.S */
-#include <asm/arch/irqs.h>		/* should be moved into entry-macro.S */
 #include <asm/arch/entry-macro.S>
 
 #include "entry-header.S"
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index d7d69fd..1e985f2 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -33,6 +33,8 @@
 #define MACHINFO_PGOFFIO	12
 #define MACHINFO_NAME		16
 
+#define KERNEL_RAM_ADDR	(PAGE_OFFSET + TEXT_OFFSET)
+
 /*
  * swapper_pg_dir is the virtual address of the initial page table.
  * We place the page tables 16K below KERNEL_RAM_ADDR.  Therefore, we must
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index d7099db..869c466 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -1027,7 +1027,6 @@ void __init init_irq_proc(void)
 void __init init_IRQ(void)
 {
 	struct irqdesc *desc;
-	extern void init_dma(void);
 	int irq;
 
 #ifdef CONFIG_SMP
@@ -1041,7 +1040,6 @@ void __init init_IRQ(void)
 	}
 
 	init_arch_irq();
-	init_dma();
 }
 
 static int __init noirqdebug_setup(char *str)
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 30494aa..54a21bd 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -28,10 +28,9 @@
 #include <linux/init.h>
 #include <linux/cpu.h>
 
-#include <asm/system.h>
-#include <asm/io.h>
 #include <asm/leds.h>
 #include <asm/processor.h>
+#include <asm/system.h>
 #include <asm/uaccess.h>
 #include <asm/mach/time.h>
 
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 8577416..2cab741a 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -26,8 +26,6 @@
 
 #include <asm/cpu.h>
 #include <asm/elf.h>
-#include <asm/hardware.h>
-#include <asm/io.h>
 #include <asm/procinfo.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index fc47291..d7d932c 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -29,9 +29,6 @@
 #include <linux/sysdev.h>
 #include <linux/timer.h>
 
-#include <asm/hardware.h>
-#include <asm/io.h>
-#include <asm/irq.h>
 #include <asm/leds.h>
 #include <asm/thread_info.h>
 #include <asm/mach/time.h>
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 45e9ea6..c9fe6f5 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -23,7 +23,6 @@
 
 #include <asm/atomic.h>
 #include <asm/cacheflush.h>
-#include <asm/io.h>
 #include <asm/system.h>
 #include <asm/uaccess.h>
 #include <asm/unistd.h>
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index 9a47770..2b254e8 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -17,15 +17,13 @@ jiffies = jiffies_64;
 jiffies = jiffies_64 + 4;
 #endif
 
+SECTIONS
+{
 #ifdef CONFIG_XIP_KERNEL
-#define TEXTADDR  XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
+	. = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR);
 #else
-#define TEXTADDR  KERNEL_RAM_ADDR
+	. = PAGE_OFFSET + TEXT_OFFSET;
 #endif
-
-SECTIONS
-{
-	. = TEXTADDR;
 	.init : {			/* Init code and data		*/
 		_stext = .;
 			_sinittext = .;
@@ -104,7 +102,7 @@ SECTIONS
 
 #ifdef CONFIG_XIP_KERNEL
 	__data_loc = ALIGN(4);		/* location in binary */
-	. = KERNEL_RAM_ADDR;
+	. = PAGE_OFFSET + TEXT_OFFSET;
 #else
 	. = ALIGN(THREAD_SIZE);
 	__data_loc = .;
diff --git a/arch/arm/mach-aaec2000/clock.c b/arch/arm/mach-aaec2000/clock.c
index 0340ddc..1c84c60 100644
--- a/arch/arm/mach-aaec2000/clock.c
+++ b/arch/arm/mach-aaec2000/clock.c
@@ -15,9 +15,9 @@
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/string.h>
+#include <linux/clk.h>
 
 #include <asm/semaphore.h>
-#include <asm/hardware/clock.h>
 
 #include "clock.h"
 
@@ -58,17 +58,6 @@ void clk_disable(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_disable);
 
-int clk_use(struct clk *clk)
-{
-	return 0;
-}
-EXPORT_SYMBOL(clk_use);
-
-void clk_unuse(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_unuse);
-
 unsigned long clk_get_rate(struct clk *clk)
 {
 	return clk->rate;
diff --git a/arch/arm/mach-aaec2000/core.c b/arch/arm/mach-aaec2000/core.c
index 4e706d9..dce4815 100644
--- a/arch/arm/mach-aaec2000/core.c
+++ b/arch/arm/mach-aaec2000/core.c
@@ -20,11 +20,11 @@
 #include <linux/interrupt.h>
 #include <linux/timex.h>
 #include <linux/signal.h>
+#include <linux/amba/bus.h>
 
 #include <asm/hardware.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
-#include <asm/hardware/amba.h>
 
 #include <asm/mach/flash.h>
 #include <asm/mach/irq.h>
diff --git a/arch/arm/mach-aaec2000/core.h b/arch/arm/mach-aaec2000/core.h
index daefc0e..b6029a9 100644
--- a/arch/arm/mach-aaec2000/core.h
+++ b/arch/arm/mach-aaec2000/core.h
@@ -9,7 +9,7 @@
  *
  */
 
-#include <asm/hardware/amba_clcd.h>
+#include <linux/amba/clcd.h>
 
 struct sys_timer;
 
diff --git a/arch/arm/mach-clps711x/dma.c b/arch/arm/mach-clps711x/dma.c
deleted file mode 100644
index af5a4de..0000000
--- a/arch/arm/mach-clps711x/dma.c
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- *  linux/arch/arm/mach-clps711x/dma.c
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/init.h>
-
-#include <asm/dma.h>
-#include <asm/mach/dma.h>
-
-void __init arch_dma_init(dma_t *dma)
-{
-}
diff --git a/arch/arm/mach-epxa10db/dma.c b/arch/arm/mach-epxa10db/dma.c
deleted file mode 100644
index 0151e9f..0000000
--- a/arch/arm/mach-epxa10db/dma.c
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- *  linux/arch/arm/mach-epxa10db/dma.c
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/init.h>
-
-#include <asm/dma.h>
-#include <asm/mach/dma.h>
-
-void __init arch_dma_init(dma_t *dma)
-{
-}
diff --git a/arch/arm/mach-footbridge/dma.c b/arch/arm/mach-footbridge/dma.c
index a6b1396..7a54578 100644
--- a/arch/arm/mach-footbridge/dma.c
+++ b/arch/arm/mach-footbridge/dma.c
@@ -15,6 +15,7 @@
 
 #include <asm/dma.h>
 #include <asm/io.h>
+#include <asm/scatterlist.h>
 
 #include <asm/mach/dma.h>
 #include <asm/hardware/dec21285.h>
diff --git a/arch/arm/mach-imx/mx1ads.c b/arch/arm/mach-imx/mx1ads.c
index 708e1b3..c9e0cd8 100644
--- a/arch/arm/mach-imx/mx1ads.c
+++ b/arch/arm/mach-imx/mx1ads.c
@@ -29,27 +29,27 @@
 #include "generic.h"
 #include <asm/serial.h>
 
-static struct resource mx1ads_resources[] = {
+static struct resource cs89x0_resources[] = {
 	[0] = {
-		.start	= IMX_CS4_VIRT,
-		.end	= IMX_CS4_VIRT + 16,
+		.start	= IMX_CS4_PHYS + 0x300,
+		.end	= IMX_CS4_PHYS + 0x300 + 16,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= 13,
-		.end	= 13,
+		.start	= IRQ_GPIOC(17),
+		.end	= IRQ_GPIOC(17),
 		.flags	= IORESOURCE_IRQ,
 	},
 };
 
-static struct platform_device mx1ads_device = {
-	.name		= "mx1ads",
-	.num_resources	= ARRAY_SIZE(mx1ads_resources),
-	.resource	= mx1ads_resources,
+static struct platform_device cs89x0_device = {
+	.name		= "cirrus-cs89x0",
+	.num_resources	= ARRAY_SIZE(cs89x0_resources),
+	.resource	= cs89x0_resources,
 };
 
 static struct platform_device *devices[] __initdata = {
-	&mx1ads_device,
+	&cs89x0_device,
 };
 
 static void __init
@@ -61,45 +61,10 @@ mx1ads_init(void)
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 
-static struct map_desc mx1ads_io_desc[] __initdata = {
-	{
-		.virtual	= IMX_CS0_VIRT,
-		.pfn		= __phys_to_pfn(IMX_CS0_PHYS),
-		.length		= IMX_CS0_SIZE,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= IMX_CS1_VIRT,
-		.pfn		= __phys_to_pfn(IMX_CS1_PHYS),
-		.length		= IMX_CS1_SIZE,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= IMX_CS2_VIRT,
-		.pfn		= __phys_to_pfn(IMX_CS2_PHYS),
-		.length		= IMX_CS2_SIZE,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= IMX_CS3_VIRT,
-		.pfn		= __phys_to_pfn(IMX_CS3_PHYS),
-		.length		= IMX_CS3_SIZE,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= IMX_CS4_VIRT,
-		.pfn		= __phys_to_pfn(IMX_CS4_PHYS),
-		.length		= IMX_CS4_SIZE,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= IMX_CS5_VIRT,
-		.pfn		= __phys_to_pfn(IMX_CS5_PHYS),
-		.length		= IMX_CS5_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-
 static void __init
 mx1ads_map_io(void)
 {
 	imx_map_io();
-	iotable_init(mx1ads_io_desc, ARRAY_SIZE(mx1ads_io_desc));
 }
 
 MACHINE_START(MX1ADS, "Motorola MX1ADS")
diff --git a/arch/arm/mach-integrator/clock.c b/arch/arm/mach-integrator/clock.c
index 73c3606..40684e0 100644
--- a/arch/arm/mach-integrator/clock.c
+++ b/arch/arm/mach-integrator/clock.c
@@ -14,9 +14,9 @@
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/string.h>
+#include <linux/clk.h>
 
 #include <asm/semaphore.h>
-#include <asm/hardware/clock.h>
 #include <asm/hardware/icst525.h>
 
 #include "clock.h"
@@ -58,17 +58,6 @@ void clk_disable(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_disable);
 
-int clk_use(struct clk *clk)
-{
-	return 0;
-}
-EXPORT_SYMBOL(clk_use);
-
-void clk_unuse(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_unuse);
-
 unsigned long clk_get_rate(struct clk *clk)
 {
 	return clk->rate;
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index dacbf50..20071a2 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -15,11 +15,11 @@
 #include <linux/interrupt.h>
 #include <linux/sched.h>
 #include <linux/smp.h>
+#include <linux/amba/bus.h>
 
 #include <asm/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
-#include <asm/hardware/amba.h>
 #include <asm/hardware/arm_timer.h>
 #include <asm/arch/cm.h>
 #include <asm/system.h>
diff --git a/arch/arm/mach-integrator/dma.c b/arch/arm/mach-integrator/dma.c
deleted file mode 100644
index aae6f23..0000000
--- a/arch/arm/mach-integrator/dma.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- *  linux/arch/arm/mach-integrator/dma.c
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/slab.h>
-#include <linux/mman.h>
-#include <linux/init.h>
-
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <asm/hardware.h>
-
-#include <asm/mach/dma.h>
-
-void __init arch_dma_init(dma_t *dma)
-{
-}
diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
index a4bafee..a85d471 100644
--- a/arch/arm/mach-integrator/impd1.c
+++ b/arch/arm/mach-integrator/impd1.c
@@ -18,11 +18,11 @@
 #include <linux/device.h>
 #include <linux/errno.h>
 #include <linux/mm.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/clcd.h>
 
 #include <asm/io.h>
 #include <asm/hardware/icst525.h>
-#include <asm/hardware/amba.h>
-#include <asm/hardware/amba_clcd.h>
 #include <asm/arch/lm.h>
 #include <asm/arch/impd1.h>
 #include <asm/sizes.h>
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index 4c0f7c65..3afedeb 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -25,6 +25,8 @@
 #include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/sysdev.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/kmi.h>
 
 #include <asm/hardware.h>
 #include <asm/io.h>
@@ -32,8 +34,6 @@
 #include <asm/setup.h>
 #include <asm/param.h>		/* HZ */
 #include <asm/mach-types.h>
-#include <asm/hardware/amba.h>
-#include <asm/hardware/amba_kmi.h>
 
 #include <asm/arch/lm.h>
 
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 93f7ccb..16cf248 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -16,15 +16,15 @@
 #include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/sysdev.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/kmi.h>
+#include <linux/amba/clcd.h>
 
 #include <asm/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
-#include <asm/hardware/amba.h>
-#include <asm/hardware/amba_kmi.h>
-#include <asm/hardware/amba_clcd.h>
 #include <asm/hardware/icst525.h>
 
 #include <asm/arch/cm.h>
diff --git a/arch/arm/mach-integrator/time.c b/arch/arm/mach-integrator/time.c
index 1a844ca..9f46aae 100644
--- a/arch/arm/mach-integrator/time.c
+++ b/arch/arm/mach-integrator/time.c
@@ -14,8 +14,8 @@
 #include <linux/interrupt.h>
 #include <linux/init.h>
 #include <linux/device.h>
+#include <linux/amba/bus.h>
 
-#include <asm/hardware/amba.h>
 #include <asm/hardware.h>
 #include <asm/io.h>
 #include <asm/uaccess.h>
diff --git a/arch/arm/mach-iop3xx/iop331-setup.c b/arch/arm/mach-iop3xx/iop331-setup.c
index 53f6061..e6ea1cb 100644
--- a/arch/arm/mach-iop3xx/iop331-setup.c
+++ b/arch/arm/mach-iop3xx/iop331-setup.c
@@ -18,7 +18,7 @@
 #include <linux/platform_device.h>
 #include <linux/serial.h>
 #include <linux/tty.h>
-#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
 
 #include <asm/io.h>
 #include <asm/pgtable.h>
@@ -50,32 +50,74 @@ static struct map_desc iop331_std_desc[] __initdata = {
 	}
 };
 
-static struct uart_port iop331_serial_ports[] = {
-	{
-		.membase	= (char*)(IOP331_UART0_VIRT),
-		.mapbase	= (IOP331_UART0_PHYS),
-		.irq		= IRQ_IOP331_UART0,
-		.flags		= UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IOP331_UART_XTAL,
-		.line		= 0,
-		.type		= PORT_XSCALE,
-		.fifosize	= 32
-	} , {
-		.membase	= (char*)(IOP331_UART1_VIRT),
-		.mapbase	= (IOP331_UART1_PHYS),
-		.irq		= IRQ_IOP331_UART1,
-		.flags		= UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IOP331_UART_XTAL,
-		.line		= 1,
-		.type		= PORT_XSCALE,
-		.fifosize	= 32
+static struct resource iop33x_uart0_resources[] = {
+	[0] = {
+		.start = IOP331_UART0_PHYS,
+		.end = IOP331_UART0_PHYS + 0x3f,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_IOP331_UART0,
+		.end = IRQ_IOP331_UART0,
+		.flags = IORESOURCE_IRQ
+	}
+};
+
+static struct resource iop33x_uart1_resources[] = {
+	[0] = {
+		.start = IOP331_UART1_PHYS,
+		.end = IOP331_UART1_PHYS + 0x3f,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_IOP331_UART1,
+		.end = IRQ_IOP331_UART1,
+		.flags = IORESOURCE_IRQ
 	}
 };
 
+static struct plat_serial8250_port iop33x_uart0_data[] = {
+	{
+       .membase     = (char*)(IOP331_UART0_VIRT),
+       .mapbase     = (IOP331_UART0_PHYS),
+       .irq         = IRQ_IOP331_UART0,
+       .uartclk     = IOP331_UART_XTAL,
+       .regshift    = 2,
+       .iotype      = UPIO_MEM,
+       .flags       = UPF_SKIP_TEST,
+	},
+	{  },
+};
+
+static struct plat_serial8250_port iop33x_uart1_data[] = {
+	{
+       .membase     = (char*)(IOP331_UART1_VIRT),
+       .mapbase     = (IOP331_UART1_PHYS),
+       .irq         = IRQ_IOP331_UART1,
+       .uartclk     = IOP331_UART_XTAL,
+       .regshift    = 2,
+       .iotype      = UPIO_MEM,
+       .flags       = UPF_SKIP_TEST,
+	},
+	{  },
+};
+
+static struct platform_device iop33x_uart0 = {
+       .name = "serial8250",
+       .id = 0,
+       .dev.platform_data = iop33x_uart0_data,
+       .num_resources = 2,
+       .resource = iop33x_uart0_resources,
+};
+
+static struct platform_device iop33x_uart1 = {
+       .name = "serial8250",
+       .id = 1,
+       .dev.platform_data = iop33x_uart1_data,
+       .num_resources = 2,
+       .resource = iop33x_uart1_resources,
+};
+
 static struct resource iop33x_i2c_0_resources[] = {
 	[0] = {
 		.start = 0xfffff680,
@@ -117,6 +159,8 @@ static struct platform_device iop33x_i2c_1_controller = {
 };
 
 static struct platform_device *iop33x_devices[] __initdata = {
+	&iop33x_uart0,
+	&iop33x_uart1,
 	&iop33x_i2c_0_controller,
 	&iop33x_i2c_1_controller
 };
@@ -133,8 +177,6 @@ void __init iop33x_init(void)
 void __init iop331_map_io(void)
 {
 	iotable_init(iop331_std_desc, ARRAY_SIZE(iop331_std_desc));
-	early_serial_setup(&iop331_serial_ports[0]);
-	early_serial_setup(&iop331_serial_ports[1]);
 }
 
 #ifdef CONFIG_ARCH_IOP331
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index 3852858..daadc78 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -71,6 +71,14 @@ config ARCH_PRPMC1100
 	  PrPCM1100 Processor Mezanine Module. For more information on
 	  this platform, see <file:Documentation/arm/IXP4xx>.
 
+config MACH_NAS100D
+	bool
+	prompt "NAS100D"
+	help
+	  Say 'Y' here if you want your kernel to support Iomega's
+	  NAS 100d device. For more information on this platform,
+	  see http://www.nslu2-linux.org/wiki/NAS100d/HomePage
+
 #
 # Avila and IXDP share the same source for now. Will change in future
 #
diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile
index 7a15629..0471044 100644
--- a/arch/arm/mach-ixp4xx/Makefile
+++ b/arch/arm/mach-ixp4xx/Makefile
@@ -9,4 +9,5 @@ obj-$(CONFIG_MACH_IXDPG425)	+= ixdpg425-pci.o coyote-setup.o
 obj-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-pci.o coyote-setup.o
 obj-$(CONFIG_MACH_GTWX5715)	+= gtwx5715-pci.o gtwx5715-setup.o
 obj-$(CONFIG_MACH_NSLU2)	+= nslu2-pci.o nslu2-setup.o nslu2-power.o
+obj-$(CONFIG_MACH_NAS100D)	+= nas100d-pci.o nas100d-setup.o nas100d-power.o
 
diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c
index 9795da2..6e3462e 100644
--- a/arch/arm/mach-ixp4xx/common-pci.c
+++ b/arch/arm/mach-ixp4xx/common-pci.c
@@ -341,6 +341,29 @@ int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
 	return (dev->bus == &pci_bus_type ) && ((dma_addr + size) >= SZ_64M);
 }
 
+/*
+ * Only first 64MB of memory can be accessed via PCI.
+ * We use GFP_DMA to allocate safe buffers to do map/unmap.
+ * This is really ugly and we need a better way of specifying
+ * DMA-capable regions of memory.
+ */
+void __init ixp4xx_adjust_zones(int node, unsigned long *zone_size,
+	unsigned long *zhole_size)
+{
+	unsigned int sz = SZ_64M >> PAGE_SHIFT;
+
+	/*
+	 * Only adjust if > 64M on current system
+	 */
+	if (node || (zone_size[0] <= sz))
+		return;
+
+	zone_size[1] = zone_size[0] - sz;
+	zone_size[0] = sz;
+	zhole_size[1] = zhole_size[0];
+	zhole_size[0] = 0;
+}
+
 void __init ixp4xx_pci_preinit(void)
 {  
 	unsigned long processor_id;
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index f3c687c..6b39369 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -142,6 +142,8 @@ static int ixp4xx_set_irq_type(unsigned int irq, unsigned int type)
 	*int_reg &= ~(IXP4XX_GPIO_STYLE_CLEAR <<
 	    		(line * IXP4XX_GPIO_STYLE_SIZE));
 
+	*IXP4XX_GPIO_GPISR = (1 << line);
+
 	/* Set the new style */
 	*int_reg |= (int_style << (line * IXP4XX_GPIO_STYLE_SIZE));
 
@@ -169,7 +171,7 @@ static void ixp4xx_irq_ack(unsigned int irq)
 	int line = (irq < 32) ? irq2gpio[irq] : -1;
 
 	if (line >= 0)
-		gpio_line_isr_clear(line);
+		*IXP4XX_GPIO_GPISR = (1 << line);
 }
 
 /*
@@ -330,11 +332,27 @@ static struct platform_device *ixp46x_devices[] __initdata = {
 	&ixp46x_i2c_controller
 };
 
+unsigned long ixp4xx_exp_bus_size;
+
 void __init ixp4xx_sys_init(void)
 {
+	ixp4xx_exp_bus_size = SZ_16M;
+
 	if (cpu_is_ixp46x()) {
+		int region;
+
 		platform_add_devices(ixp46x_devices,
 				ARRAY_SIZE(ixp46x_devices));
+
+		for (region = 0; region < 7; region++) {
+			if((*(IXP4XX_EXP_REG(0x4 * region)) & 0x200)) {
+				ixp4xx_exp_bus_size = SZ_32M;
+				break;
+			}
+		}
 	}
+
+	printk("IXP4xx: Using %uMiB expansion bus window size\n",
+			ixp4xx_exp_bus_size >> 20);
 }
 
diff --git a/arch/arm/mach-ixp4xx/coyote-pci.c b/arch/arm/mach-ixp4xx/coyote-pci.c
index 60de8a9..e6b7fcd 100644
--- a/arch/arm/mach-ixp4xx/coyote-pci.c
+++ b/arch/arm/mach-ixp4xx/coyote-pci.c
@@ -33,9 +33,6 @@ void __init coyote_pci_preinit(void)
 	set_irq_type(IRQ_COYOTE_PCI_SLOT0, IRQT_LOW);
 	set_irq_type(IRQ_COYOTE_PCI_SLOT1, IRQT_LOW);
 
-	gpio_line_isr_clear(COYOTE_PCI_SLOT0_PIN);
-	gpio_line_isr_clear(COYOTE_PCI_SLOT1_PIN);
-
 	ixp4xx_pci_preinit();
 }
 
diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c
index 050c927..679594a 100644
--- a/arch/arm/mach-ixp4xx/coyote-setup.c
+++ b/arch/arm/mach-ixp4xx/coyote-setup.c
@@ -14,6 +14,7 @@
 #include <linux/serial.h>
 #include <linux/tty.h>
 #include <linux/serial_8250.h>
+#include <linux/slab.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
@@ -30,8 +31,6 @@ static struct flash_platform_data coyote_flash_data = {
 };
 
 static struct resource coyote_flash_resource = {
-	.start		= COYOTE_FLASH_BASE,
-	.end		= COYOTE_FLASH_BASE + COYOTE_FLASH_SIZE - 1,
 	.flags		= IORESOURCE_MEM,
 };
 
@@ -81,6 +80,11 @@ static struct platform_device *coyote_devices[] __initdata = {
 
 static void __init coyote_init(void)
 {
+	ixp4xx_sys_init();
+
+	coyote_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+	coyote_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
+
 	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
 	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
 
@@ -91,8 +95,6 @@ static void __init coyote_init(void)
 		coyote_uart_data[0].irq = IRQ_IXP4XX_UART1;
 	}
 
-
-	ixp4xx_sys_init();
 	platform_add_devices(coyote_devices, ARRAY_SIZE(coyote_devices));
 }
 
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
index 29a6d02..0386704 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
@@ -27,6 +27,7 @@
 #include <linux/serial.h>
 #include <linux/tty.h>
 #include <linux/serial_8250.h>
+#include <linux/slab.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
@@ -106,11 +107,9 @@ static struct flash_platform_data gtwx5715_flash_data = {
 	.width		= 2,
 };
 
-static struct resource gtwx5715_flash_resource = {
-	.start		= GTWX5715_FLASH_BASE,
-	.end		= GTWX5715_FLASH_BASE + GTWX5715_FLASH_SIZE - 1,
+static struct gtw5715_flash_resource = {
 	.flags		= IORESOURCE_MEM,
-};
+}
 
 static struct platform_device gtwx5715_flash = {
 	.name		= "IXP4XX-Flash",
@@ -129,6 +128,14 @@ static struct platform_device *gtwx5715_devices[] __initdata = {
 
 static void __init gtwx5715_init(void)
 {
+	ixp4xx_sys_init();
+
+	if (!flash_resource)
+		printk(KERN_ERR "Could not allocate flash resource\n");
+
+	gtwx5715_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+	gtwx5715_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_8M - 1;
+
 	platform_add_devices(gtwx5715_devices, ARRAY_SIZE(gtwx5715_devices));
 }
 
diff --git a/arch/arm/mach-ixp4xx/ixdp425-pci.c b/arch/arm/mach-ixp4xx/ixdp425-pci.c
index f9a1d3e..da415d5 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-pci.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c
@@ -32,11 +32,6 @@ void __init ixdp425_pci_preinit(void)
 	set_irq_type(IRQ_IXDP425_PCI_INTC, IRQT_LOW);
 	set_irq_type(IRQ_IXDP425_PCI_INTD, IRQT_LOW);
 
-	gpio_line_isr_clear(IXDP425_PCI_INTA_PIN);
-	gpio_line_isr_clear(IXDP425_PCI_INTB_PIN);
-	gpio_line_isr_clear(IXDP425_PCI_INTC_PIN);
-	gpio_line_isr_clear(IXDP425_PCI_INTD_PIN);
-
 	ixp4xx_pci_preinit();
 }
 
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index 3a22d84..c2e105c 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -14,6 +14,7 @@
 #include <linux/serial.h>
 #include <linux/tty.h>
 #include <linux/serial_8250.h>
+#include <linux/slab.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
@@ -30,8 +31,6 @@ static struct flash_platform_data ixdp425_flash_data = {
 };
 
 static struct resource ixdp425_flash_resource = {
-	.start		= IXDP425_FLASH_BASE,
-	.end		= IXDP425_FLASH_BASE + IXDP425_FLASH_SIZE - 1,
 	.flags		= IORESOURCE_MEM,
 };
 
@@ -108,17 +107,13 @@ static struct platform_device *ixdp425_devices[] __initdata = {
 	&ixdp425_uart
 };
 
-
 static void __init ixdp425_init(void)
 {
 	ixp4xx_sys_init();
 
-	/*
-	 * IXP465 has 32MB window
-	 */
-	if (machine_is_ixdp465()) {
-		ixdp425_flash_resource.end += IXDP425_FLASH_SIZE;
-	}
+	ixdp425_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+	ixdp425_flash_resource.end =
+		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
 
 	platform_add_devices(ixdp425_devices, ARRAY_SIZE(ixdp425_devices));
 }
diff --git a/arch/arm/mach-ixp4xx/ixdpg425-pci.c b/arch/arm/mach-ixp4xx/ixdpg425-pci.c
index fe5e766..526fb61 100644
--- a/arch/arm/mach-ixp4xx/ixdpg425-pci.c
+++ b/arch/arm/mach-ixp4xx/ixdpg425-pci.c
@@ -32,9 +32,6 @@ void __init ixdpg425_pci_preinit(void)
 	set_irq_type(IRQ_IXP4XX_GPIO6, IRQT_LOW);
 	set_irq_type(IRQ_IXP4XX_GPIO7, IRQT_LOW);
 
-	gpio_line_isr_clear(6);
-	gpio_line_isr_clear(7);
-
 	ixp4xx_pci_preinit();
 }
 
diff --git a/arch/arm/mach-ixp4xx/nas100d-pci.c b/arch/arm/mach-ixp4xx/nas100d-pci.c
new file mode 100644
index 0000000..26b7c00
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/nas100d-pci.c
@@ -0,0 +1,71 @@
+/*
+ * arch/arm/mach-ixp4xx/nas100d-pci.c
+ *
+ * NAS 100d board-level PCI initialization
+ *
+ * based on ixdp425-pci.c:
+ *	Copyright (C) 2002 Intel Corporation.
+ *	Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * Maintainer: http://www.nslu2-linux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+
+#include <asm/mach/pci.h>
+#include <asm/mach-types.h>
+
+void __init nas100d_pci_preinit(void)
+{
+	set_irq_type(IRQ_NAS100D_PCI_INTA, IRQT_LOW);
+	set_irq_type(IRQ_NAS100D_PCI_INTB, IRQT_LOW);
+	set_irq_type(IRQ_NAS100D_PCI_INTC, IRQT_LOW);
+	set_irq_type(IRQ_NAS100D_PCI_INTD, IRQT_LOW);
+	set_irq_type(IRQ_NAS100D_PCI_INTE, IRQT_LOW);
+
+	ixp4xx_pci_preinit();
+}
+
+static int __init nas100d_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	static int pci_irq_table[NAS100D_PCI_MAX_DEV][NAS100D_PCI_IRQ_LINES] =
+	{
+		{ IRQ_NAS100D_PCI_INTA, -1, -1 },
+		{ IRQ_NAS100D_PCI_INTB, -1, -1 },
+		{ IRQ_NAS100D_PCI_INTC, IRQ_NAS100D_PCI_INTD, IRQ_NAS100D_PCI_INTE },
+	};
+
+	int irq = -1;
+
+	if (slot >= 1 && slot <= NAS100D_PCI_MAX_DEV &&
+		pin >= 1 && pin <= NAS100D_PCI_IRQ_LINES)
+		irq = pci_irq_table[slot-1][pin-1];
+
+	return irq;
+}
+
+struct hw_pci __initdata nas100d_pci = {
+	.nr_controllers = 1,
+	.preinit	= nas100d_pci_preinit,
+	.swizzle	= pci_std_swizzle,
+	.setup		= ixp4xx_setup,
+	.scan		= ixp4xx_scan_bus,
+	.map_irq	= nas100d_map_irq,
+};
+
+int __init nas100d_pci_init(void)
+{
+	if (machine_is_nas100d())
+		pci_common_init(&nas100d_pci);
+
+	return 0;
+}
+
+subsys_initcall(nas100d_pci_init);
diff --git a/arch/arm/mach-ixp4xx/nas100d-power.c b/arch/arm/mach-ixp4xx/nas100d-power.c
new file mode 100644
index 0000000..2bec69b
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/nas100d-power.c
@@ -0,0 +1,67 @@
+/*
+ * arch/arm/mach-ixp4xx/nas100d-power.c
+ *
+ * NAS 100d Power/Reset driver
+ *
+ * Copyright (C) 2005 Tower Technologies
+ *
+ * based on nas100d-io.c
+ *  Copyright (C) 2004 Karen Spearel
+ *
+ * Author: Alessandro Zummo <a.zummo@towertech.it>
+ * Maintainers: http://www.nslu2-linux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/reboot.h>
+#include <linux/interrupt.h>
+
+#include <asm/mach-types.h>
+
+extern void ctrl_alt_del(void);
+
+static irqreturn_t nas100d_reset_handler(int irq, void *dev_id, struct pt_regs *regs)
+{
+	/* Signal init to do the ctrlaltdel action, this will bypass init if
+	 * it hasn't started and do a kernel_restart.
+	 */
+	ctrl_alt_del();
+
+	return IRQ_HANDLED;
+}
+
+static int __init nas100d_power_init(void)
+{
+	if (!(machine_is_nas100d()))
+		return 0;
+
+	set_irq_type(NAS100D_RB_IRQ, IRQT_LOW);
+
+	if (request_irq(NAS100D_RB_IRQ, &nas100d_reset_handler,
+		SA_INTERRUPT, "NAS100D reset button", NULL) < 0) {
+
+		printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
+			NAS100D_RB_IRQ);
+
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static void __exit nas100d_power_exit(void)
+{
+	free_irq(NAS100D_RB_IRQ, NULL);
+}
+
+module_init(nas100d_power_init);
+module_exit(nas100d_power_exit);
+
+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
+MODULE_DESCRIPTION("NAS100D Power/Reset driver");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
new file mode 100644
index 0000000..49998a8
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -0,0 +1,135 @@
+/*
+ * arch/arm/mach-ixp4xx/nas100d-setup.c
+ *
+ * NAS 100d board-setup
+ *
+ * based ixdp425-setup.c:
+ *      Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * Author: Alessandro Zummo <a.zummo@towertech.it>
+ * Author: Rod Whitby <rod@whitby.id.au>
+ * Maintainers: http://www.nslu2-linux.org/
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+
+static struct flash_platform_data nas100d_flash_data = {
+	.map_name		= "cfi_probe",
+	.width			= 2,
+};
+
+static struct resource nas100d_flash_resource = {
+	.flags			= IORESOURCE_MEM,
+};
+
+static struct platform_device nas100d_flash = {
+	.name			= "IXP4XX-Flash",
+	.id			= 0,
+	.dev.platform_data	= &nas100d_flash_data,
+	.num_resources		= 1,
+	.resource		= &nas100d_flash_resource,
+};
+
+static struct ixp4xx_i2c_pins nas100d_i2c_gpio_pins = {
+	.sda_pin		= NAS100D_SDA_PIN,
+	.scl_pin		= NAS100D_SCL_PIN,
+};
+
+static struct platform_device nas100d_i2c_controller = {
+	.name			= "IXP4XX-I2C",
+	.id			= 0,
+	.dev.platform_data	= &nas100d_i2c_gpio_pins,
+	.num_resources		= 0,
+};
+
+static struct resource nas100d_uart_resources[] = {
+	{
+		.start		= IXP4XX_UART1_BASE_PHYS,
+		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= IXP4XX_UART2_BASE_PHYS,
+		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
+		.flags		= IORESOURCE_MEM,
+	}
+};
+
+static struct plat_serial8250_port nas100d_uart_data[] = {
+	{
+		.mapbase	= IXP4XX_UART1_BASE_PHYS,
+		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
+		.irq		= IRQ_IXP4XX_UART1,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP4XX_UART_XTAL,
+	},
+	{
+		.mapbase	= IXP4XX_UART2_BASE_PHYS,
+		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
+		.irq		= IRQ_IXP4XX_UART2,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP4XX_UART_XTAL,
+	},
+	{ }
+};
+
+static struct platform_device nas100d_uart = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev.platform_data	= nas100d_uart_data,
+	.num_resources		= 2,
+	.resource		= nas100d_uart_resources,
+};
+
+static struct platform_device *nas100d_devices[] __initdata = {
+	&nas100d_i2c_controller,
+	&nas100d_flash,
+	&nas100d_uart,
+};
+
+static void nas100d_power_off(void)
+{
+	/* This causes the box to drop the power and go dead. */
+
+	/* enable the pwr cntl gpio */
+	gpio_line_config(NAS100D_PO_GPIO, IXP4XX_GPIO_OUT);
+
+	/* do the deed */
+	gpio_line_set(NAS100D_PO_GPIO, IXP4XX_GPIO_HIGH);
+}
+
+static void __init nas100d_init(void)
+{
+	ixp4xx_sys_init();
+
+	nas100d_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+	nas100d_flash_resource.end =
+		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
+
+	pm_power_off = nas100d_power_off;
+
+	platform_add_devices(nas100d_devices, ARRAY_SIZE(nas100d_devices));
+}
+
+MACHINE_START(NAS100D, "Iomega NAS 100d")
+	/* Maintainer: www.nslu2-linux.org */
+	.phys_ram	= PHYS_OFFSET,
+	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
+	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
+	.boot_params	= 0x00000100,
+	.map_io		= ixp4xx_map_io,
+	.init_irq	= ixp4xx_init_irq,
+	.timer          = &ixp4xx_timer,
+	.init_machine	= nas100d_init,
+MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/nslu2-pci.c b/arch/arm/mach-ixp4xx/nslu2-pci.c
index a575f2e..ece8604 100644
--- a/arch/arm/mach-ixp4xx/nslu2-pci.c
+++ b/arch/arm/mach-ixp4xx/nslu2-pci.c
@@ -28,14 +28,6 @@ void __init nslu2_pci_preinit(void)
 	set_irq_type(IRQ_NSLU2_PCI_INTB, IRQT_LOW);
 	set_irq_type(IRQ_NSLU2_PCI_INTC, IRQT_LOW);
 
-	gpio_line_isr_clear(NSLU2_PCI_INTA_PIN);
-	gpio_line_isr_clear(NSLU2_PCI_INTB_PIN);
-	gpio_line_isr_clear(NSLU2_PCI_INTC_PIN);
-
-	/* INTD is not configured as GPIO is used
-	 * for the power input button.
-	 */
-
 	ixp4xx_pci_preinit();
 }
 
diff --git a/arch/arm/mach-ixp4xx/nslu2-power.c b/arch/arm/mach-ixp4xx/nslu2-power.c
index 18fbc8c..b0ad9e9 100644
--- a/arch/arm/mach-ixp4xx/nslu2-power.c
+++ b/arch/arm/mach-ixp4xx/nslu2-power.c
@@ -54,9 +54,6 @@ static int __init nslu2_power_init(void)
 	set_irq_type(NSLU2_RB_IRQ, IRQT_LOW);
 	set_irq_type(NSLU2_PB_IRQ, IRQT_HIGH);
 
-	gpio_line_isr_clear(NSLU2_RB_GPIO);
-	gpio_line_isr_clear(NSLU2_PB_GPIO);
-
 	if (request_irq(NSLU2_RB_IRQ, &nslu2_reset_handler,
 		SA_INTERRUPT, "NSLU2 reset button", NULL) < 0) {
 
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 540b20d..5c975eb 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -19,6 +19,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/notifier.h>
+#include <linux/clk.h>
 
 #include <asm/hardware.h>
 #include <asm/mach-types.h>
@@ -30,7 +31,6 @@
 #include <asm/arch/usb.h>
 #include <asm/arch/board.h>
 #include <asm/arch/common.h>
-#include <asm/hardware/clock.h>
 
 static void __init omap_generic_init_irq(void)
 {
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 4277eee..9d862f8 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -16,9 +16,9 @@
 #include <linux/list.h>
 #include <linux/errno.h>
 #include <linux/err.h>
+#include <linux/clk.h>
 
 #include <asm/io.h>
-#include <asm/hardware/clock.h>
 
 #include <asm/arch/usb.h>
 #include <asm/arch/clock.h>
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 6810cfb..fcfb81d 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -17,10 +17,10 @@
 #include <linux/tty.h>
 #include <linux/serial_8250.h>
 #include <linux/serial_reg.h>
+#include <linux/clk.h>
 
 #include <asm/io.h>
 #include <asm/mach-types.h>
-#include <asm/hardware/clock.h>
 
 #include <asm/arch/board.h>
 #include <asm/arch/mux.h>
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 85818d9..5407b95 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -22,10 +22,10 @@
 #include <linux/list.h>
 #include <linux/errno.h>
 #include <linux/delay.h>
+#include <linux/clk.h>
 
 #include <asm/io.h>
 
-#include <asm/hardware/clock.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/sram.h>
 #include <asm/arch/prcm.h>
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index f4df04f..e1bd46a 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -16,9 +16,9 @@
 #include <linux/init.h>
 #include <linux/serial_8250.h>
 #include <linux/serial_reg.h>
+#include <linux/clk.h>
 
 #include <asm/io.h>
-#include <asm/hardware/clock.h>
 
 #include <asm/arch/common.h>
 #include <asm/arch/board.h>
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index 9ec1144..23d36b1 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -21,10 +21,11 @@
 #include <linux/time.h>
 #include <linux/interrupt.h>
 #include <linux/err.h>
+#include <linux/clk.h>
+
 #include <asm/mach/time.h>
 #include <asm/delay.h>
 #include <asm/io.h>
-#include <asm/hardware/clock.h>
 
 #define OMAP2_GP_TIMER1_BASE	0x48028000
 #define OMAP2_GP_TIMER2_BASE	0x4802a000
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 2a58499..c1d77f5 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -112,12 +112,14 @@ config IWMMXT
 config PXA_SHARP_C7xx
 	bool
 	select PXA_SSP
+	select SHARPSL_PM
 	help
 	  Enable support for all Sharp C7xx models
 
 config PXA_SHARP_Cxx00
 	bool
 	select PXA_SSP
+	select SHARPSL_PM
 	help
 	  Enable common support for Sharp Cxx00 models
 
diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
index 599be14..7a1ab73 100644
--- a/arch/arm/mach-pxa/corgi_pm.c
+++ b/arch/arm/mach-pxa/corgi_pm.c
@@ -33,19 +33,7 @@ static void corgi_charger_init(void)
 	pxa_gpio_mode(CORGI_GPIO_CHRG_ON | GPIO_OUT);
 	pxa_gpio_mode(CORGI_GPIO_CHRG_UKN | GPIO_OUT);
 	pxa_gpio_mode(CORGI_GPIO_KEY_INT | GPIO_IN);
-}
-
-static void corgi_charge_led(int val)
-{
-	if (val == SHARPSL_LED_ERROR) {
-		dev_dbg(sharpsl_pm.dev, "Charge LED Error\n");
-	} else if (val == SHARPSL_LED_ON) {
-		dev_dbg(sharpsl_pm.dev, "Charge LED On\n");
-		GPSR0 = GPIO_bit(CORGI_GPIO_LED_ORANGE);
-	} else {
-		dev_dbg(sharpsl_pm.dev, "Charge LED Off\n");
-		GPCR0 = GPIO_bit(CORGI_GPIO_LED_ORANGE);
-	}
+	sharpsl_pm_pxa_init();
 }
 
 static void corgi_measure_temp(int on)
@@ -138,15 +126,15 @@ static int corgi_should_wakeup(unsigned int resume_on_alarm)
 	dev_dbg(sharpsl_pm.dev, "GPLR0 = %x,%x\n", GPLR0, PEDR);
 
 	if ((PEDR & GPIO_bit(CORGI_GPIO_AC_IN))) {
-		if (STATUS_AC_IN()) {
+		if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
 			/* charge on */
 			dev_dbg(sharpsl_pm.dev, "ac insert\n");
 			sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG;
 		} else {
 			/* charge off */
 			dev_dbg(sharpsl_pm.dev, "ac remove\n");
-			CHARGE_LED_OFF();
-			CHARGE_OFF();
+			sharpsl_pm_led(SHARPSL_LED_OFF);
+			sharpsl_pm.machinfo->charge(0);
 			sharpsl_pm.charge_mode = CHRG_OFF;
 		}
 	}
@@ -172,23 +160,39 @@ static unsigned long corgi_charger_wakeup(void)
 	return ~GPLR0 & ( GPIO_bit(CORGI_GPIO_AC_IN) | GPIO_bit(CORGI_GPIO_KEY_INT) | GPIO_bit(CORGI_GPIO_WAKEUP) );
 }
 
-static int corgi_acin_status(void)
+unsigned long corgipm_read_devdata(int type)
 {
-	return ((GPLR(CORGI_GPIO_AC_IN) & GPIO_bit(CORGI_GPIO_AC_IN)) != 0);
+	switch(type) {
+	case SHARPSL_STATUS_ACIN:
+		return ((GPLR(CORGI_GPIO_AC_IN) & GPIO_bit(CORGI_GPIO_AC_IN)) != 0);
+	case SHARPSL_STATUS_LOCK:
+		return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batlock);
+	case SHARPSL_STATUS_CHRGFULL:
+		return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batfull);
+	case SHARPSL_STATUS_FATAL:
+		return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_fatal);
+	case SHARPSL_ACIN_VOLT:
+		return sharpsl_pm_pxa_read_max1111(MAX1111_ACIN_VOLT);
+	case SHARPSL_BATT_TEMP:
+		return sharpsl_pm_pxa_read_max1111(MAX1111_BATT_TEMP);
+	case SHARPSL_BATT_VOLT:
+	default:
+		return sharpsl_pm_pxa_read_max1111(MAX1111_BATT_VOLT);
+	}
 }
 
 static struct sharpsl_charger_machinfo corgi_pm_machinfo = {
 	.init            = corgi_charger_init,
+	.exit            = sharpsl_pm_pxa_remove,
 	.gpio_batlock    = CORGI_GPIO_BAT_COVER,
 	.gpio_acin       = CORGI_GPIO_AC_IN,
 	.gpio_batfull    = CORGI_GPIO_CHRG_FULL,
-	.status_acin     = corgi_acin_status,
 	.discharge       = corgi_discharge,
 	.charge          = corgi_charge,
-	.chargeled       = corgi_charge_led,
 	.measure_temp    = corgi_measure_temp,
 	.presuspend      = corgi_presuspend,
 	.postsuspend     = corgi_postsuspend,
+	.read_devdata    = corgipm_read_devdata,
 	.charger_wakeup  = corgi_charger_wakeup,
 	.should_wakeup   = corgi_should_wakeup,
 	.bat_levels      = 40,
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 277498a..8da9d3e 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -427,6 +427,12 @@ static void __init mainstone_init(void)
 	printk(KERN_NOTICE "Mainstone configured to boot from %s\n",
 	       mst_flash_data[0].name);
 
+	/* system bus arbiter setting
+	 * - Core_Park
+	 * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
+	 */
+	ARB_CNTRL = ARB_CORE_PARK | 0x234;
+
 	/*
 	 * On Mainstone, we route AC97_SYSCLK via GPIO45 to
 	 * the audio daughter card
diff --git a/arch/arm/mach-pxa/sharpsl.h b/arch/arm/mach-pxa/sharpsl.h
index b0c40a1..da4769c 100644
--- a/arch/arm/mach-pxa/sharpsl.h
+++ b/arch/arm/mach-pxa/sharpsl.h
@@ -1,7 +1,17 @@
 /*
- * SharpSL SSP Driver
+ * Copyright (c) 2004-2005 Richard Purdie
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
  */
 
+#include <asm/hardware/sharpsl_pm.h>
+
+/*
+ * SharpSL SSP Driver
+ */
 struct corgissp_machinfo {
 	int port;
 	int cs_lcdcon;
@@ -14,18 +24,18 @@ struct corgissp_machinfo {
 
 void corgi_ssp_set_machinfo(struct corgissp_machinfo *machinfo);
 
+
 /*
  * SharpSL Backlight
  */
-
 void corgi_bl_set_intensity(int intensity);
 void spitz_bl_set_intensity(int intensity);
 void akita_bl_set_intensity(int intensity);
 
+
 /*
  * SharpSL Touchscreen Driver
  */
-
 unsigned long corgi_get_hsync_len(void);
 unsigned long spitz_get_hsync_len(void);
 void corgi_put_hsync(void);
@@ -33,89 +43,22 @@ void spitz_put_hsync(void);
 void corgi_wait_hsync(void);
 void spitz_wait_hsync(void);
 
+
 /*
  * SharpSL Battery/PM Driver
  */
 
-struct sharpsl_charger_machinfo {
-	void (*init)(void);
-	int gpio_acin;
-	int gpio_batfull;
-	int gpio_batlock;
-	int gpio_fatal;
-	int (*status_acin)(void);
-	void (*discharge)(int);
-	void (*discharge1)(int);
-	void (*charge)(int);
-	void (*chargeled)(int);
-	void (*measure_temp)(int);
-	void (*presuspend)(void);
-	void (*postsuspend)(void);
-	unsigned long (*charger_wakeup)(void);
-	int (*should_wakeup)(unsigned int resume_on_alarm);
-	int bat_levels;
-	struct battery_thresh *bat_levels_noac;
-	struct battery_thresh *bat_levels_acin;
-	int status_high_acin;
-	int status_low_acin;
-	int status_high_noac;
-	int status_low_noac;
-};
-
-struct battery_thresh {
-	int voltage;
-	int percentage;
-};
-
-struct battery_stat {
-	int ac_status;         /* APM AC Present/Not Present */
-	int mainbat_status;    /* APM Main Battery Status */
-	int mainbat_percent;   /* Main Battery Percentage Charge */
-	int mainbat_voltage;   /* Main Battery Voltage */
-};
-
-struct sharpsl_pm_status {
-	struct device *dev;
-	struct timer_list ac_timer;
-	struct timer_list chrg_full_timer;
-
-	int charge_mode;
-#define CHRG_ERROR    (-1)
-#define CHRG_OFF      (0)
-#define CHRG_ON       (1)
-#define CHRG_DONE     (2)
-
-	unsigned int flags;
-#define SHARPSL_SUSPENDED       (1 << 0)  /* Device is Suspended */
-#define SHARPSL_ALARM_ACTIVE    (1 << 1)  /* Alarm is for charging event (not user) */
-#define SHARPSL_BL_LIMIT        (1 << 2)  /* Backlight Intensity Limited */
-#define SHARPSL_APM_QUEUED      (1 << 3)  /* APM Event Queued */
-#define SHARPSL_DO_OFFLINE_CHRG (1 << 4)  /* Trigger the offline charger */
+#define READ_GPIO_BIT(x)    (GPLR(x) & GPIO_bit(x))
 
-	int full_count;
-	unsigned long charge_start_time;
-	struct sharpsl_charger_machinfo *machinfo;
-	struct battery_stat battstat;
-};
+/* MAX1111 Channel Definitions */
+#define MAX1111_BATT_VOLT   4u
+#define MAX1111_BATT_TEMP   2u
+#define MAX1111_ACIN_VOLT   6u
 
-extern struct sharpsl_pm_status sharpsl_pm;
 extern struct battery_thresh spitz_battery_levels_acin[];
 extern struct battery_thresh spitz_battery_levels_noac[];
+void sharpsl_pm_pxa_init(void);
+void sharpsl_pm_pxa_remove(void);
+int sharpsl_pm_pxa_read_max1111(int channel);
 
-#define READ_GPIO_BIT(x)    (GPLR(x) & GPIO_bit(x))
-
-#define SHARPSL_LED_ERROR  2
-#define SHARPSL_LED_ON     1
-#define SHARPSL_LED_OFF    0
 
-#define CHARGE_ON()         sharpsl_pm.machinfo->charge(1)
-#define CHARGE_OFF()        sharpsl_pm.machinfo->charge(0)
-#define CHARGE_LED_ON()     sharpsl_pm.machinfo->chargeled(SHARPSL_LED_ON)
-#define CHARGE_LED_OFF()    sharpsl_pm.machinfo->chargeled(SHARPSL_LED_OFF)
-#define CHARGE_LED_ERR()    sharpsl_pm.machinfo->chargeled(SHARPSL_LED_ERROR)
-#define DISCHARGE_ON()      sharpsl_pm.machinfo->discharge(1)
-#define DISCHARGE_OFF()     sharpsl_pm.machinfo->discharge(0)
-#define STATUS_AC_IN()      sharpsl_pm.machinfo->status_acin()
-#define STATUS_BATT_LOCKED()  READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batlock)
-#define STATUS_CHRG_FULL()  READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batfull)
-#define STATUS_FATAL()      READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_fatal)
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index c10be00..6d402b2 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -15,48 +15,20 @@
 #undef DEBUG
 
 #include <linux/module.h>
-#include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
-#include <linux/apm_bios.h>
-#include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 
 #include <asm/hardware.h>
-#include <asm/hardware/scoop.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
 #include <asm/apm.h>
-
 #include <asm/arch/pm.h>
 #include <asm/arch/pxa-regs.h>
 #include <asm/arch/sharpsl.h>
 #include "sharpsl.h"
 
-/*
- * Constants
- */
-#define SHARPSL_CHARGE_ON_TIME_INTERVAL        (msecs_to_jiffies(1*60*1000))  /* 1 min */
-#define SHARPSL_CHARGE_FINISH_TIME             (msecs_to_jiffies(10*60*1000)) /* 10 min */
-#define SHARPSL_BATCHK_TIME                    (msecs_to_jiffies(15*1000))    /* 15 sec */
-#define SHARPSL_BATCHK_TIME_SUSPEND            (60*10)                        /* 10 min */
-#define SHARPSL_WAIT_CO_TIME                   15  /* 15 sec */
-#define SHARPSL_WAIT_DISCHARGE_ON              100 /* 100 msec */
-#define SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP   10  /* 10 msec */
-#define SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT   10  /* 10 msec */
-#define SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN   10  /* 10 msec */
-#define SHARPSL_CHARGE_WAIT_TIME               15  /* 15 msec */
-#define SHARPSL_CHARGE_CO_CHECK_TIME           5   /* 5 msec */
-#define SHARPSL_CHARGE_RETRY_CNT               1   /* eqv. 10 min */
-
-#define SHARPSL_CHARGE_ON_VOLT         0x99  /* 2.9V */
-#define SHARPSL_CHARGE_ON_TEMP         0xe0  /* 2.9V */
-#define SHARPSL_CHARGE_ON_ACIN_HIGH    0x9b  /* 6V */
-#define SHARPSL_CHARGE_ON_ACIN_LOW     0x34  /* 2V */
-#define SHARPSL_FATAL_ACIN_VOLT        182   /* 3.45V */
-#define SHARPSL_FATAL_NOACIN_VOLT      170   /* 3.40V */
-
 struct battery_thresh spitz_battery_levels_acin[] = {
 	{ 213, 100},
 	{ 212,  98},
@@ -151,763 +123,17 @@ struct battery_thresh  spitz_battery_levels_noac[] = {
 #define MAXCTRL_SEL_SH   4
 #define MAXCTRL_STR      1u << 7
 
-/* MAX1111 Channel Definitions */
-#define BATT_AD    4u
-#define BATT_THM   2u
-#define JK_VAD     6u
-
-
-/*
- * Prototypes
- */
-static int sharpsl_read_main_battery(void);
-static int sharpsl_off_charge_battery(void);
-static int sharpsl_check_battery_temp(void);
-static int sharpsl_check_battery_voltage(void);
-static int sharpsl_ac_check(void);
-static int sharpsl_fatal_check(void);
-static int sharpsl_average_value(int ad);
-static void sharpsl_average_clear(void);
-static void sharpsl_charge_toggle(void *private_);
-static void sharpsl_battery_thread(void *private_);
-
-
-/*
- * Variables
- */
-struct sharpsl_pm_status sharpsl_pm;
-DECLARE_WORK(toggle_charger, sharpsl_charge_toggle, NULL);
-DECLARE_WORK(sharpsl_bat, sharpsl_battery_thread, NULL);
-
-
-static int get_percentage(int voltage)
-{
-	int i = sharpsl_pm.machinfo->bat_levels - 1;
-	struct battery_thresh *thresh;
-
-	if (sharpsl_pm.charge_mode == CHRG_ON)
-		thresh=sharpsl_pm.machinfo->bat_levels_acin;
-	else
-		thresh=sharpsl_pm.machinfo->bat_levels_noac;
-
-	while (i > 0 && (voltage > thresh[i].voltage))
-		i--;
-
-	return thresh[i].percentage;
-}
-
-static int get_apm_status(int voltage)
-{
-	int low_thresh, high_thresh;
-
-	if (sharpsl_pm.charge_mode == CHRG_ON) {
-		high_thresh = sharpsl_pm.machinfo->status_high_acin;
-		low_thresh = sharpsl_pm.machinfo->status_low_acin;
-	} else {
-		high_thresh = sharpsl_pm.machinfo->status_high_noac;
-		low_thresh = sharpsl_pm.machinfo->status_low_noac;
-	}
-
-	if (voltage >= high_thresh)
-		return APM_BATTERY_STATUS_HIGH;
-	if (voltage >= low_thresh)
-		return APM_BATTERY_STATUS_LOW;
-	return APM_BATTERY_STATUS_CRITICAL;
-}
-
-void sharpsl_battery_kick(void)
-{
-	schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(125));
-}
-EXPORT_SYMBOL(sharpsl_battery_kick);
-
-
-static void sharpsl_battery_thread(void *private_)
-{
-	int voltage, percent, apm_status, i = 0;
-
-	if (!sharpsl_pm.machinfo)
-		return;
-
-	sharpsl_pm.battstat.ac_status = (STATUS_AC_IN() ? APM_AC_ONLINE : APM_AC_OFFLINE);
-
-	/* Corgi cannot confirm when battery fully charged so periodically kick! */
-	if (machine_is_corgi() && (sharpsl_pm.charge_mode == CHRG_ON)
-			&& time_after(jiffies, sharpsl_pm.charge_start_time +  SHARPSL_CHARGE_ON_TIME_INTERVAL))
-		schedule_work(&toggle_charger);
-
-	while(1) {
-		voltage = sharpsl_read_main_battery();
-		if (voltage > 0) break;
-		if (i++ > 5) {
-			voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage;
-			dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n");
-			break;
-		}
-	}
-
-	voltage = sharpsl_average_value(voltage);
-	apm_status = get_apm_status(voltage);
-	percent = get_percentage(voltage);
-
-	/* At low battery voltages, the voltage has a tendency to start
-           creeping back up so we try to avoid this here */
-	if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE) || (apm_status == APM_BATTERY_STATUS_HIGH) ||  percent <= sharpsl_pm.battstat.mainbat_percent) {
-		sharpsl_pm.battstat.mainbat_voltage = voltage;
-		sharpsl_pm.battstat.mainbat_status = apm_status;
-		sharpsl_pm.battstat.mainbat_percent = percent;
-	}
-
-	dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %d\n", voltage,
-			sharpsl_pm.battstat.mainbat_status, sharpsl_pm.battstat.mainbat_percent, jiffies);
-
-	/* If battery is low. limit backlight intensity to save power. */
-	if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
-			&& ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW) ||
-			(sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) {
-		if (!(sharpsl_pm.flags & SHARPSL_BL_LIMIT)) {
-			corgibl_limit_intensity(1);
-			sharpsl_pm.flags |= SHARPSL_BL_LIMIT;
-		}
-	} else if (sharpsl_pm.flags & SHARPSL_BL_LIMIT) {
-		corgibl_limit_intensity(0);
-		sharpsl_pm.flags &= ~SHARPSL_BL_LIMIT;
-	}
-
-	/* Suspend if critical battery level */
-	if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
-			&& (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL)
-			&& !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) {
-		sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
-		dev_err(sharpsl_pm.dev, "Fatal Off\n");
-		apm_queue_event(APM_CRITICAL_SUSPEND);
-	}
-
-	schedule_delayed_work(&sharpsl_bat, SHARPSL_BATCHK_TIME);
-}
-
-static void sharpsl_charge_on(void)
-{
-	dev_dbg(sharpsl_pm.dev, "Turning Charger On\n");
-
-	sharpsl_pm.full_count = 0;
-	sharpsl_pm.charge_mode = CHRG_ON;
-	schedule_delayed_work(&toggle_charger, msecs_to_jiffies(250));
-	schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(500));
-}
-
-static void sharpsl_charge_off(void)
-{
-	dev_dbg(sharpsl_pm.dev, "Turning Charger Off\n");
-
-	CHARGE_OFF();
-	CHARGE_LED_OFF();
-	sharpsl_pm.charge_mode = CHRG_OFF;
-
-	schedule_work(&sharpsl_bat);
-}
-
-static void sharpsl_charge_error(void)
-{
-	CHARGE_LED_ERR();
-	CHARGE_OFF();
-	sharpsl_pm.charge_mode = CHRG_ERROR;
-}
-
-static void sharpsl_charge_toggle(void *private_)
-{
-	dev_dbg(sharpsl_pm.dev, "Toogling Charger at time: %lx\n", jiffies);
-
-	if (STATUS_AC_IN() == 0) {
-		sharpsl_charge_off();
-		return;
-	} else if ((sharpsl_check_battery_temp() < 0) || (sharpsl_ac_check() < 0)) {
-		sharpsl_charge_error();
-		return;
-	}
-
-	CHARGE_LED_ON();
-	CHARGE_OFF();
-	mdelay(SHARPSL_CHARGE_WAIT_TIME);
-	CHARGE_ON();
-
-	sharpsl_pm.charge_start_time = jiffies;
-}
-
-static void sharpsl_ac_timer(unsigned long data)
-{
-	int acin = STATUS_AC_IN();
-
-	dev_dbg(sharpsl_pm.dev, "AC Status: %d\n",acin);
-
-	sharpsl_average_clear();
-	if (acin && (sharpsl_pm.charge_mode != CHRG_ON))
-		sharpsl_charge_on();
-	else if (sharpsl_pm.charge_mode == CHRG_ON)
-		sharpsl_charge_off();
-
-	schedule_work(&sharpsl_bat);
-}
-
-
-static irqreturn_t sharpsl_ac_isr(int irq, void *dev_id, struct pt_regs *fp)
-{
-	/* Delay the event slightly to debounce */
-	/* Must be a smaller delay than the chrg_full_isr below */
-	mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
-
-	return IRQ_HANDLED;
-}
-
-static void sharpsl_chrg_full_timer(unsigned long data)
-{
-	dev_dbg(sharpsl_pm.dev, "Charge Full at time: %lx\n", jiffies);
-
-	sharpsl_pm.full_count++;
-
-	if (STATUS_AC_IN() == 0) {
-		dev_dbg(sharpsl_pm.dev, "Charge Full: AC removed - stop charging!\n");
-		if (sharpsl_pm.charge_mode == CHRG_ON)
-			sharpsl_charge_off();
-	} else if (sharpsl_pm.full_count < 2) {
-		dev_dbg(sharpsl_pm.dev, "Charge Full: Count too low\n");
-		schedule_work(&toggle_charger);
-	} else if (time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_FINISH_TIME)) {
-		dev_dbg(sharpsl_pm.dev, "Charge Full: Interrupt generated too slowly - retry.\n");
-		schedule_work(&toggle_charger);
-	} else {
-		sharpsl_charge_off();
-		sharpsl_pm.charge_mode = CHRG_DONE;
-		dev_dbg(sharpsl_pm.dev, "Charge Full: Charging Finished\n");
-	}
-}
-
-/* Charging Finished Interrupt (Not present on Corgi) */
-/* Can trigger at the same time as an AC staus change so
-   delay until after that has been processed */
-static irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id, struct pt_regs *fp)
-{
-	if (sharpsl_pm.flags & SHARPSL_SUSPENDED)
-		return IRQ_HANDLED;
-
-	/* delay until after any ac interrupt */
-	mod_timer(&sharpsl_pm.chrg_full_timer, jiffies + msecs_to_jiffies(500));
-
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id, struct pt_regs *fp)
-{
-	int is_fatal = 0;
-
-	if (STATUS_BATT_LOCKED() == 0) {
-		dev_err(sharpsl_pm.dev, "Battery now Unlocked! Suspending.\n");
-		is_fatal = 1;
-	}
-
-	if (sharpsl_pm.machinfo->gpio_fatal && (STATUS_FATAL() == 0)) {
-		dev_err(sharpsl_pm.dev, "Fatal Batt Error! Suspending.\n");
-		is_fatal = 1;
-	}
-
-	if (!(sharpsl_pm.flags & SHARPSL_APM_QUEUED) && is_fatal) {
-		sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
-		apm_queue_event(APM_CRITICAL_SUSPEND);
-	}
-
-	return IRQ_HANDLED;
-}
-
-/*
- * Maintain an average of the last 10 readings
- */
-#define SHARPSL_CNV_VALUE_NUM    10
-static int sharpsl_ad_index;
-
-static void sharpsl_average_clear(void)
-{
-	sharpsl_ad_index = 0;
-}
-
-static int sharpsl_average_value(int ad)
-{
-	int i, ad_val = 0;
-	static int sharpsl_ad[SHARPSL_CNV_VALUE_NUM+1];
-
-	if (sharpsl_pm.battstat.mainbat_status != APM_BATTERY_STATUS_HIGH) {
-		sharpsl_ad_index = 0;
-		return ad;
-	}
-
-	sharpsl_ad[sharpsl_ad_index] = ad;
-	sharpsl_ad_index++;
-	if (sharpsl_ad_index >= SHARPSL_CNV_VALUE_NUM) {
-		for (i=0; i < (SHARPSL_CNV_VALUE_NUM-1); i++)
-			sharpsl_ad[i] = sharpsl_ad[i+1];
-		sharpsl_ad_index = SHARPSL_CNV_VALUE_NUM - 1;
-	}
-	for (i=0; i < sharpsl_ad_index; i++)
-		ad_val += sharpsl_ad[i];
-
-	return (ad_val / sharpsl_ad_index);
-}
-
-
 /*
  * Read MAX1111 ADC
  */
-static int read_max1111(int channel)
+int sharpsl_pm_pxa_read_max1111(int channel)
 {
 	return corgi_ssp_max1111_get((channel << MAXCTRL_SEL_SH) | MAXCTRL_PD0 | MAXCTRL_PD1
 			| MAXCTRL_SGL | MAXCTRL_UNI | MAXCTRL_STR);
 }
 
-static int sharpsl_read_main_battery(void)
-{
-	return read_max1111(BATT_AD);
-}
-
-static int sharpsl_read_temp(void)
+void sharpsl_pm_pxa_init(void)
 {
-	int temp;
-
-	sharpsl_pm.machinfo->measure_temp(1);
-
-	mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
-	temp = read_max1111(BATT_THM);
-
-	sharpsl_pm.machinfo->measure_temp(0);
-
-	return temp;
-}
-
-static int sharpsl_read_acin(void)
-{
-	return read_max1111(JK_VAD);
-}
-
-/*
- * Take an array of 5 integers, remove the maximum and minimum values
- * and return the average.
- */
-static int get_select_val(int *val)
-{
-	int i, j, k, temp, sum = 0;
-
-	/* Find MAX val */
-	temp = val[0];
-	j=0;
-	for (i=1; i<5; i++) {
-		if (temp < val[i]) {
-			temp = val[i];
-			j = i;
-		}
-	}
-
-	/* Find MIN val */
-	temp = val[4];
-	k=4;
-	for (i=3; i>=0; i--) {
-		if (temp > val[i]) {
-			temp = val[i];
-			k = i;
-		}
-	}
-
-	for (i=0; i<5; i++)
-		if (i != j && i != k )
-			sum += val[i];
-
-	dev_dbg(sharpsl_pm.dev, "Average: %d from values: %d, %d, %d, %d, %d\n", sum/3, val[0], val[1], val[2], val[3], val[4]);
-
-	return (sum/3);
-}
-
-static int sharpsl_check_battery_temp(void)
-{
-	int val, i, buff[5];
-
-	/* Check battery temperature */
-	for (i=0; i<5; i++) {
-		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
-		buff[i] = sharpsl_read_temp();
-	}
-
-	val = get_select_val(buff);
-
-	dev_dbg(sharpsl_pm.dev, "Temperature: %d\n", val);
-	if (val > SHARPSL_CHARGE_ON_TEMP)
-		return -1;
-
-	return 0;
-}
-
-static int sharpsl_check_battery_voltage(void)
-{
-	int val, i, buff[5];
-
-	/* disable charge, enable discharge */
-	CHARGE_OFF();
-	DISCHARGE_ON();
-	mdelay(SHARPSL_WAIT_DISCHARGE_ON);
-
-	if (sharpsl_pm.machinfo->discharge1)
-		sharpsl_pm.machinfo->discharge1(1);
-
-	/* Check battery voltage */
-	for (i=0; i<5; i++) {
-		buff[i] = sharpsl_read_main_battery();
-		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
-	}
-
-	if (sharpsl_pm.machinfo->discharge1)
-		sharpsl_pm.machinfo->discharge1(0);
-
-	DISCHARGE_OFF();
-
-	val = get_select_val(buff);
-	dev_dbg(sharpsl_pm.dev, "Battery Voltage: %d\n", val);
-
-	if (val < SHARPSL_CHARGE_ON_VOLT)
-		return -1;
-
-	return 0;
-}
-
-static int sharpsl_ac_check(void)
-{
-	int temp, i, buff[5];
-
-	for (i=0; i<5; i++) {
-		buff[i] = sharpsl_read_acin();
-		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN);
-	}
-
-	temp = get_select_val(buff);
-	dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n",temp);
-
-	if ((temp > SHARPSL_CHARGE_ON_ACIN_HIGH) || (temp < SHARPSL_CHARGE_ON_ACIN_LOW)) {
-		dev_err(sharpsl_pm.dev, "Error: AC check failed.\n");
-		return -1;
-	}
-
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static int sharpsl_pm_suspend(struct platform_device *pdev, pm_message_t state)
-{
-	sharpsl_pm.flags |= SHARPSL_SUSPENDED;
-	flush_scheduled_work();
-
-	if (sharpsl_pm.charge_mode == CHRG_ON)
-		sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG;
-	else
-		sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
-
-	return 0;
-}
-
-static int sharpsl_pm_resume(struct platform_device *pdev)
-{
-	/* Clear the reset source indicators as they break the bootloader upon reboot */
-	RCSR = 0x0f;
-	sharpsl_average_clear();
-	sharpsl_pm.flags &= ~SHARPSL_APM_QUEUED;
-	sharpsl_pm.flags &= ~SHARPSL_SUSPENDED;
-
-	return 0;
-}
-
-static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
-{
-	dev_dbg(sharpsl_pm.dev, "Time is: %08x\n",RCNR);
-
-	dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n",sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG);
-	/* not charging and AC-IN! */
-
-	if ((sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG) && (STATUS_AC_IN() != 0)) {
-		dev_dbg(sharpsl_pm.dev, "Activating Offline Charger...\n");
-		sharpsl_pm.charge_mode = CHRG_OFF;
-		sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
-		sharpsl_off_charge_battery();
-	}
-
-	sharpsl_pm.machinfo->presuspend();
-
-	PEDR = 0xffffffff; /* clear it */
-
-	sharpsl_pm.flags &= ~SHARPSL_ALARM_ACTIVE;
-	if ((sharpsl_pm.charge_mode == CHRG_ON) && ((alarm_enable && ((alarm_time - RCNR) > (SHARPSL_BATCHK_TIME_SUSPEND + 30))) || !alarm_enable)) {
-		RTSR &= RTSR_ALE;
-		RTAR = RCNR + SHARPSL_BATCHK_TIME_SUSPEND;
-		dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n",RTAR);
-		sharpsl_pm.flags |= SHARPSL_ALARM_ACTIVE;
-	} else if (alarm_enable) {
-		RTSR &= RTSR_ALE;
-		RTAR = alarm_time;
-		dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n",RTAR);
-	} else {
-		dev_dbg(sharpsl_pm.dev, "No alarms set.\n");
-	}
-
-	pxa_pm_enter(state);
-
-	sharpsl_pm.machinfo->postsuspend();
-
-	dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n",PEDR);
-}
-
-static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
-{
-	if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable) )
-	{
-		if (!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE)) {
-			dev_dbg(sharpsl_pm.dev, "No user triggered wakeup events and not charging. Strange. Suspend.\n");
-			corgi_goto_sleep(alarm_time, alarm_enable, state);
-			return 1;
-		}
-		if(sharpsl_off_charge_battery()) {
-			dev_dbg(sharpsl_pm.dev, "Charging. Suspend...\n");
-			corgi_goto_sleep(alarm_time, alarm_enable, state);
-			return 1;
-		}
-		dev_dbg(sharpsl_pm.dev, "User triggered wakeup in offline charger.\n");
-	}
-
-	if ((STATUS_BATT_LOCKED() == 0) || (sharpsl_fatal_check() < 0) )
-	{
-		dev_err(sharpsl_pm.dev, "Fatal condition. Suspend.\n");
-		corgi_goto_sleep(alarm_time, alarm_enable, state);
-		return 1;
-	}
-
-	return 0;
-}
-
-static int corgi_pxa_pm_enter(suspend_state_t state)
-{
-	unsigned long alarm_time = RTAR;
-	unsigned int alarm_status = ((RTSR & RTSR_ALE) != 0);
-
-	dev_dbg(sharpsl_pm.dev, "SharpSL suspending for first time.\n");
-
-	corgi_goto_sleep(alarm_time, alarm_status, state);
-
-	while (corgi_enter_suspend(alarm_time,alarm_status,state))
-		{}
-
-	dev_dbg(sharpsl_pm.dev, "SharpSL resuming...\n");
-
-	return 0;
-}
-#endif
-
-
-/*
- * Check for fatal battery errors
- * Fatal returns -1
- */
-static int sharpsl_fatal_check(void)
-{
-	int buff[5], temp, i, acin;
-
-	dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check entered\n");
-
-	/* Check AC-Adapter */
-	acin = STATUS_AC_IN();
-
-	if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) {
-		CHARGE_OFF();
-		udelay(100);
-		DISCHARGE_ON();	/* enable discharge */
-		mdelay(SHARPSL_WAIT_DISCHARGE_ON);
-	}
-
-	if (sharpsl_pm.machinfo->discharge1)
-		sharpsl_pm.machinfo->discharge1(1);
-
-	/* Check battery : check inserting battery ? */
-	for (i=0; i<5; i++) {
-		buff[i] = sharpsl_read_main_battery();
-		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
-	}
-
-	if (sharpsl_pm.machinfo->discharge1)
-		sharpsl_pm.machinfo->discharge1(0);
-
-	if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) {
-		udelay(100);
-		CHARGE_ON();
-		DISCHARGE_OFF();
-	}
-
-	temp = get_select_val(buff);
-	dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check: acin: %d, discharge voltage: %d, no discharge: %d\n", acin, temp, sharpsl_read_main_battery());
-
-	if ((acin && (temp < SHARPSL_FATAL_ACIN_VOLT)) ||
-			(!acin && (temp < SHARPSL_FATAL_NOACIN_VOLT)))
-		return -1;
-	return 0;
-}
-
-static int sharpsl_off_charge_error(void)
-{
-	dev_err(sharpsl_pm.dev, "Offline Charger: Error occured.\n");
-	CHARGE_OFF();
-	CHARGE_LED_ERR();
-	sharpsl_pm.charge_mode = CHRG_ERROR;
-	return 1;
-}
-
-/*
- * Charging Control while suspended
- * Return 1 - go straight to sleep
- * Return 0 - sleep or wakeup depending on other factors
- */
-static int sharpsl_off_charge_battery(void)
-{
-	int time;
-
-	dev_dbg(sharpsl_pm.dev, "Charge Mode: %d\n", sharpsl_pm.charge_mode);
-
-	if (sharpsl_pm.charge_mode == CHRG_OFF) {
-		dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 1\n");
-
-		/* AC Check */
-		if ((sharpsl_ac_check() < 0) || (sharpsl_check_battery_temp() < 0))
-			return sharpsl_off_charge_error();
-
-		/* Start Charging */
-		CHARGE_LED_ON();
-		CHARGE_OFF();
-		mdelay(SHARPSL_CHARGE_WAIT_TIME);
-		CHARGE_ON();
-
-		sharpsl_pm.charge_mode = CHRG_ON;
-		sharpsl_pm.full_count = 0;
-
-		return 1;
-	} else if (sharpsl_pm.charge_mode != CHRG_ON) {
-		return 1;
-	}
-
-	if (sharpsl_pm.full_count == 0) {
-		int time;
-
-		dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 2\n");
-
-		if ((sharpsl_check_battery_temp() < 0) || (sharpsl_check_battery_voltage() < 0))
-			return sharpsl_off_charge_error();
-
-		CHARGE_OFF();
-		mdelay(SHARPSL_CHARGE_WAIT_TIME);
-		CHARGE_ON();
-		sharpsl_pm.charge_mode = CHRG_ON;
-
-		mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
-
-		time = RCNR;
-		while(1) {
-			/* Check if any wakeup event had occured */
-			if (sharpsl_pm.machinfo->charger_wakeup() != 0)
-				return 0;
-			/* Check for timeout */
-			if ((RCNR - time) > SHARPSL_WAIT_CO_TIME)
-				return 1;
-			if (STATUS_CHRG_FULL()) {
-				dev_dbg(sharpsl_pm.dev, "Offline Charger: Charge full occured. Retrying to check\n");
-	   			sharpsl_pm.full_count++;
-				CHARGE_OFF();
-				mdelay(SHARPSL_CHARGE_WAIT_TIME);
-				CHARGE_ON();
-				return 1;
-			}
-		}
-	}
-
-	dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 3\n");
-
-	mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
-
-	time = RCNR;
-	while(1) {
-		/* Check if any wakeup event had occured */
-		if (sharpsl_pm.machinfo->charger_wakeup() != 0)
-			return 0;
-		/* Check for timeout */
-		if ((RCNR-time) > SHARPSL_WAIT_CO_TIME) {
-			if (sharpsl_pm.full_count > SHARPSL_CHARGE_RETRY_CNT) {
-				dev_dbg(sharpsl_pm.dev, "Offline Charger: Not charged sufficiently. Retrying.\n");
-				sharpsl_pm.full_count = 0;
-			}
-			sharpsl_pm.full_count++;
-			return 1;
-		}
-		if (STATUS_CHRG_FULL()) {
-			dev_dbg(sharpsl_pm.dev, "Offline Charger: Charging complete.\n");
-			CHARGE_LED_OFF();
-			CHARGE_OFF();
-			sharpsl_pm.charge_mode = CHRG_DONE;
-			return 1;
-		}
-	}
-}
-
-
-static ssize_t battery_percentage_show(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_percent);
-}
-
-static ssize_t battery_voltage_show(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_voltage);
-}
-
-static DEVICE_ATTR(battery_percentage, 0444, battery_percentage_show, NULL);
-static DEVICE_ATTR(battery_voltage, 0444, battery_voltage_show, NULL);
-
-extern void (*apm_get_power_status)(struct apm_power_info *);
-
-static void sharpsl_apm_get_power_status(struct apm_power_info *info)
-{
-	info->ac_line_status = sharpsl_pm.battstat.ac_status;
-
-	if (sharpsl_pm.charge_mode == CHRG_ON)
-		info->battery_status = APM_BATTERY_STATUS_CHARGING;
-	else
-		info->battery_status = sharpsl_pm.battstat.mainbat_status;
-
-	info->battery_flag = (1 << info->battery_status);
-	info->battery_life = sharpsl_pm.battstat.mainbat_percent;
-}
-
-static struct pm_ops sharpsl_pm_ops = {
-	.pm_disk_mode	= PM_DISK_FIRMWARE,
-	.prepare	= pxa_pm_prepare,
-	.enter		= corgi_pxa_pm_enter,
-	.finish		= pxa_pm_finish,
-};
-
-static int __init sharpsl_pm_probe(struct platform_device *pdev)
-{
-	if (!pdev->dev.platform_data)
-		return -EINVAL;
-
-	sharpsl_pm.dev = &pdev->dev;
-	sharpsl_pm.machinfo = pdev->dev.platform_data;
-	sharpsl_pm.charge_mode = CHRG_OFF;
-	sharpsl_pm.flags = 0;
-
-	sharpsl_pm.machinfo->init();
-
-	init_timer(&sharpsl_pm.ac_timer);
-	sharpsl_pm.ac_timer.function = sharpsl_ac_timer;
-
-	init_timer(&sharpsl_pm.chrg_full_timer);
-	sharpsl_pm.chrg_full_timer.function = sharpsl_chrg_full_timer;
-
 	pxa_gpio_mode(sharpsl_pm.machinfo->gpio_acin | GPIO_IN);
 	pxa_gpio_mode(sharpsl_pm.machinfo->gpio_batfull | GPIO_IN);
 	pxa_gpio_mode(sharpsl_pm.machinfo->gpio_batlock | GPIO_IN);
@@ -938,26 +164,10 @@ static int __init sharpsl_pm_probe(struct platform_device *pdev)
 		}
 		else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull),IRQT_RISING);
 	}
-
-	device_create_file(&pdev->dev, &dev_attr_battery_percentage);
-	device_create_file(&pdev->dev, &dev_attr_battery_voltage);
-
-	apm_get_power_status = sharpsl_apm_get_power_status;
-
-	pm_set_ops(&sharpsl_pm_ops);
-
-	mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
-
-	return 0;
 }
 
-static int sharpsl_pm_remove(struct platform_device *pdev)
+void sharpsl_pm_pxa_remove(void)
 {
-	pm_set_ops(NULL);
-
-	device_remove_file(&pdev->dev, &dev_attr_battery_percentage);
-	device_remove_file(&pdev->dev, &dev_attr_battery_voltage);
-
 	free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr);
 	free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr);
 
@@ -966,32 +176,4 @@ static int sharpsl_pm_remove(struct platform_device *pdev)
 
 	if (!machine_is_corgi())
 		free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr);
-
-	del_timer_sync(&sharpsl_pm.chrg_full_timer);
-	del_timer_sync(&sharpsl_pm.ac_timer);
-
-	return 0;
 }
-
-static struct platform_driver sharpsl_pm_driver = {
-	.probe		= sharpsl_pm_probe,
-	.remove		= sharpsl_pm_remove,
-	.suspend	= sharpsl_pm_suspend,
-	.resume		= sharpsl_pm_resume,
-	.driver		= {
-		.name		= "sharpsl-pm",
-	},
-};
-
-static int __devinit sharpsl_pm_init(void)
-{
-	return platform_driver_register(&sharpsl_pm_driver);
-}
-
-static void sharpsl_pm_exit(void)
-{
- 	platform_driver_unregister(&sharpsl_pm_driver);
-}
-
-late_initcall(sharpsl_pm_init);
-module_exit(sharpsl_pm_exit);
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 2df1b56..f2007db 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -36,6 +36,7 @@
 #include <asm/arch/irq.h>
 #include <asm/arch/irda.h>
 #include <asm/arch/mmc.h>
+#include <asm/arch/ohci.h>
 #include <asm/arch/udc.h>
 #include <asm/arch/pxafb.h>
 #include <asm/arch/akita.h>
@@ -126,10 +127,12 @@ static void spitz_card_pwr_ctrl(int device, unsigned short new_cpr)
 		        cpr &= ~0x0002;
 		if (device == SPITZ_PWR_SD)
 		        cpr &= ~0x0004;
-	        write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr);
 		if (!(cpr & 0x0002) && !(cpr & 0x0004)) {
+			write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, 0x0000);
 		        mdelay(1);
 		        reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER);
+		} else {
+		        write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr);
 		}
 	}
 }
@@ -335,6 +338,35 @@ static struct pxamci_platform_data spitz_mci_platform_data = {
 
 
 /*
+ * USB Host (OHCI)
+ */
+static int spitz_ohci_init(struct device *dev)
+{
+	/* Only Port 2 is connected */
+	pxa_gpio_mode(SPITZ_GPIO_USB_CONNECT | GPIO_IN);
+	pxa_gpio_mode(SPITZ_GPIO_USB_HOST | GPIO_OUT);
+	pxa_gpio_mode(SPITZ_GPIO_USB_DEVICE | GPIO_IN);
+
+	/* Setup USB Port 2 Output Control Register */
+	UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
+
+	GPSR(SPITZ_GPIO_USB_HOST) = GPIO_bit(SPITZ_GPIO_USB_HOST);
+
+	UHCHR = (UHCHR) &
+		~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE);
+
+	UHCRHDA |= UHCRHDA_NOCP;
+
+	return 0;
+}
+
+static struct pxaohci_platform_data spitz_ohci_platform_data = {
+	.port_mode	= PMM_NPS_MODE,
+	.init		= spitz_ohci_init,
+};
+
+
+/*
  * Irda
  */
 static void spitz_irda_transceiver_mode(struct device *dev, int mode)
@@ -411,6 +443,7 @@ static void __init common_init(void)
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 	pxa_set_mci_info(&spitz_mci_platform_data);
+	pxa_set_ohci_info(&spitz_ohci_platform_data);
 	pxa_set_ficp_info(&spitz_ficp_platform_data);
 	set_pxa_fb_parent(&spitzssp_device.dev);
 	set_pxa_fb_info(&spitz_pxafb_info);
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 3ce7486..5e5bdc8 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -33,19 +33,7 @@ static void spitz_charger_init(void)
 {
 	pxa_gpio_mode(SPITZ_GPIO_KEY_INT | GPIO_IN);
 	pxa_gpio_mode(SPITZ_GPIO_SYNC | GPIO_IN);
-}
-
-static void spitz_charge_led(int val)
-{
-	if (val == SHARPSL_LED_ERROR) {
-		dev_dbg(sharpsl_pm.dev, "Charge LED Error\n");
-	} else if (val == SHARPSL_LED_ON) {
-		dev_dbg(sharpsl_pm.dev, "Charge LED On\n");
-		set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_ORANGE);
-	} else {
-		dev_dbg(sharpsl_pm.dev, "Charge LED Off\n");
-		reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_ORANGE);
-	}
+	sharpsl_pm_pxa_init();
 }
 
 static void spitz_measure_temp(int on)
@@ -92,7 +80,7 @@ static void spitz_discharge1(int on)
 
 static void spitz_presuspend(void)
 {
-	spitz_last_ac_status = STATUS_AC_IN();
+	spitz_last_ac_status = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
 
 	/* GPIO Sleep Register */
 	PGSR0 = 0x00144018;
@@ -138,7 +126,7 @@ static void spitz_postsuspend(void)
 static int spitz_should_wakeup(unsigned int resume_on_alarm)
 {
 	int is_resume = 0;
-	int acin = STATUS_AC_IN();
+	int acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
 
 	if (spitz_last_ac_status != acin) {
 		if (acin) {
@@ -148,8 +136,8 @@ static int spitz_should_wakeup(unsigned int resume_on_alarm)
 		} else {
 			/* charge off */
 			dev_dbg(sharpsl_pm.dev, "AC Removed\n");
-			CHARGE_LED_OFF();
-			CHARGE_OFF();
+			sharpsl_pm_led(SHARPSL_LED_OFF);
+			sharpsl_pm.machinfo->charge(0);
 			sharpsl_pm.charge_mode = CHRG_OFF;
 		}
 		spitz_last_ac_status = acin;
@@ -175,25 +163,41 @@ static unsigned long spitz_charger_wakeup(void)
 	return (~GPLR0 & GPIO_bit(SPITZ_GPIO_KEY_INT)) | (GPLR0 & GPIO_bit(SPITZ_GPIO_SYNC));
 }
 
-static int spitz_acin_status(void)
+unsigned long spitzpm_read_devdata(int type)
 {
-	return (((~GPLR(SPITZ_GPIO_AC_IN)) & GPIO_bit(SPITZ_GPIO_AC_IN)) != 0);
+	switch(type) {
+	case SHARPSL_STATUS_ACIN:
+		return (((~GPLR(SPITZ_GPIO_AC_IN)) & GPIO_bit(SPITZ_GPIO_AC_IN)) != 0);
+	case SHARPSL_STATUS_LOCK:
+		return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batlock);
+	case SHARPSL_STATUS_CHRGFULL:
+		return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batfull);
+	case SHARPSL_STATUS_FATAL:
+		return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_fatal);
+	case SHARPSL_ACIN_VOLT:
+		return sharpsl_pm_pxa_read_max1111(MAX1111_ACIN_VOLT);
+	case SHARPSL_BATT_TEMP:
+		return sharpsl_pm_pxa_read_max1111(MAX1111_BATT_TEMP);
+	case SHARPSL_BATT_VOLT:
+	default:
+		return sharpsl_pm_pxa_read_max1111(MAX1111_BATT_VOLT);
+	}
 }
 
 struct sharpsl_charger_machinfo spitz_pm_machinfo = {
 	.init             = spitz_charger_init,
+	.exit             = sharpsl_pm_pxa_remove,
 	.gpio_batlock     = SPITZ_GPIO_BAT_COVER,
 	.gpio_acin        = SPITZ_GPIO_AC_IN,
 	.gpio_batfull     = SPITZ_GPIO_CHRG_FULL,
 	.gpio_fatal       = SPITZ_GPIO_FATAL_BAT,
-	.status_acin      = spitz_acin_status,
 	.discharge        = spitz_discharge,
 	.discharge1       = spitz_discharge1,
 	.charge           = spitz_charge,
-	.chargeled        = spitz_charge_led,
 	.measure_temp     = spitz_measure_temp,
 	.presuspend       = spitz_presuspend,
 	.postsuspend      = spitz_postsuspend,
+	.read_devdata     = spitzpm_read_devdata,
 	.charger_wakeup   = spitz_charger_wakeup,
 	.should_wakeup    = spitz_should_wakeup,
 	.bat_levels       = 40,
diff --git a/arch/arm/mach-realview/clock.c b/arch/arm/mach-realview/clock.c
index 002635c..ec3f7e7 100644
--- a/arch/arm/mach-realview/clock.c
+++ b/arch/arm/mach-realview/clock.c
@@ -13,9 +13,9 @@
 #include <linux/list.h>
 #include <linux/errno.h>
 #include <linux/err.h>
+#include <linux/clk.h>
 
 #include <asm/semaphore.h>
-#include <asm/hardware/clock.h>
 #include <asm/hardware/icst307.h>
 
 #include "clock.h"
@@ -57,17 +57,6 @@ void clk_disable(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_disable);
 
-int clk_use(struct clk *clk)
-{
-	return 0;
-}
-EXPORT_SYMBOL(clk_use);
-
-void clk_unuse(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_unuse);
-
 unsigned long clk_get_rate(struct clk *clk)
 {
 	return clk->rate;
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index af6580f..4a222f5 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -24,14 +24,14 @@
 #include <linux/dma-mapping.h>
 #include <linux/sysdev.h>
 #include <linux/interrupt.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/clcd.h>
 
 #include <asm/system.h>
 #include <asm/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/leds.h>
-#include <asm/hardware/amba.h>
-#include <asm/hardware/amba_clcd.h>
 #include <asm/hardware/arm_timer.h>
 #include <asm/hardware/icst307.h>
 
diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
index c06e604..93e86d9 100644
--- a/arch/arm/mach-realview/core.h
+++ b/arch/arm/mach-realview/core.h
@@ -22,7 +22,8 @@
 #ifndef __ASM_ARCH_REALVIEW_H
 #define __ASM_ARCH_REALVIEW_H
 
-#include <asm/hardware/amba.h>
+#include <linux/amba/bus.h>
+
 #include <asm/leds.h>
 #include <asm/io.h>
 
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 7dc3250..112f759 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -23,6 +23,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/sysdev.h>
+#include <linux/amba/bus.h>
 
 #include <asm/hardware.h>
 #include <asm/io.h>
@@ -30,7 +31,6 @@
 #include <asm/leds.h>
 #include <asm/mach-types.h>
 #include <asm/hardware/gic.h>
-#include <asm/hardware/amba.h>
 #include <asm/hardware/icst307.h>
 
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-rpc/dma.c b/arch/arm/mach-rpc/dma.c
index bc07474..bd86ffb 100644
--- a/arch/arm/mach-rpc/dma.c
+++ b/arch/arm/mach-rpc/dma.c
@@ -13,7 +13,7 @@
 #include <linux/mman.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
-#include <linux/pci.h>
+#include <linux/dma-mapping.h>
 
 #include <asm/page.h>
 #include <asm/dma.h>
@@ -148,11 +148,14 @@ static void iomd_enable_dma(dmach_t channel, dma_t *dma)
 		 * Cope with ISA-style drivers which expect cache
 		 * coherence.
 		 */
-		if (!dma->using_sg) {
-			dma->buf.dma_address = pci_map_single(NULL,
-				dma->buf.__address, dma->buf.length,
+		if (!dma->sg) {
+			dma->sg = &dma->buf;
+			dma->sgcount = 1;
+			dma->buf.length = dma->count;
+			dma->buf.dma_address = dma_map_single(NULL,
+				dma->addr, dma->count,
 				dma->dma_mode == DMA_MODE_READ ?
-				PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE);
+				DMA_FROM_DEVICE : DMA_TO_DEVICE);
 		}
 
 		iomd_writeb(DMA_CR_C, dma_base + CR);
@@ -239,7 +242,7 @@ static void floppy_enable_dma(dmach_t channel, dma_t *dma)
 	unsigned int fiqhandler_length;
 	struct pt_regs regs;
 
-	if (dma->using_sg)
+	if (dma->sg)
 		BUG();
 
 	if (dma->dma_mode == DMA_MODE_READ) {
@@ -252,8 +255,8 @@ static void floppy_enable_dma(dmach_t channel, dma_t *dma)
 		fiqhandler_length = &floppy_fiqout_end - &floppy_fiqout_start;
 	}
 
-	regs.ARM_r9  = dma->buf.length;
-	regs.ARM_r10 = (unsigned long)dma->buf.__address;
+	regs.ARM_r9  = dma->count;
+	regs.ARM_r10 = (unsigned long)dma->addr;
 	regs.ARM_fp  = (unsigned long)FLOPPYDMA_BASE;
 
 	if (claim_fiq(&fh)) {
diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c
index 82e8253..5830ae3 100644
--- a/arch/arm/mach-s3c2410/clock.c
+++ b/arch/arm/mach-s3c2410/clock.c
@@ -34,16 +34,15 @@
 #include <linux/err.h>
 #include <linux/platform_device.h>
 #include <linux/sysdev.h>
-
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
+#include <linux/clk.h>
 
 #include <asm/hardware.h>
 #include <asm/atomic.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
-#include <asm/hardware/clock.h>
 #include <asm/arch/regs-clock.h>
 
 #include "clock.h"
@@ -151,18 +150,6 @@ void clk_disable(struct clk *clk)
 }
 
 
-int clk_use(struct clk *clk)
-{
-	atomic_inc(&clk->used);
-	return 0;
-}
-
-
-void clk_unuse(struct clk *clk)
-{
-	atomic_dec(&clk->used);
-}
-
 unsigned long clk_get_rate(struct clk *clk)
 {
 	if (IS_ERR(clk))
@@ -196,8 +183,6 @@ EXPORT_SYMBOL(clk_get);
 EXPORT_SYMBOL(clk_put);
 EXPORT_SYMBOL(clk_enable);
 EXPORT_SYMBOL(clk_disable);
-EXPORT_SYMBOL(clk_use);
-EXPORT_SYMBOL(clk_unuse);
 EXPORT_SYMBOL(clk_get_rate);
 EXPORT_SYMBOL(clk_round_rate);
 EXPORT_SYMBOL(clk_set_rate);
@@ -370,7 +355,6 @@ static struct clk init_clocks[] = {
 int s3c24xx_register_clock(struct clk *clk)
 {
 	clk->owner = THIS_MODULE;
-	atomic_set(&clk->used, 0);
 
 	if (clk->enable == NULL)
 		clk->enable = clk_null_enable;
diff --git a/arch/arm/mach-s3c2410/clock.h b/arch/arm/mach-s3c2410/clock.h
index 7953b6f..177d5c8 100644
--- a/arch/arm/mach-s3c2410/clock.h
+++ b/arch/arm/mach-s3c2410/clock.h
@@ -16,7 +16,6 @@ struct clk {
 	struct clk           *parent;
 	const char           *name;
 	int		      id;
-	atomic_t              used;
 	unsigned long         rate;
 	unsigned long         ctrlbit;
 	int		    (*enable)(struct clk *, int enable);
diff --git a/arch/arm/mach-s3c2410/s3c2440-clock.c b/arch/arm/mach-s3c2410/s3c2440-clock.c
index c67e097..b557a2b 100644
--- a/arch/arm/mach-s3c2410/s3c2440-clock.c
+++ b/arch/arm/mach-s3c2410/s3c2440-clock.c
@@ -29,16 +29,15 @@
 #include <linux/err.h>
 #include <linux/device.h>
 #include <linux/sysdev.h>
-
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
+#include <linux/clk.h>
 
 #include <asm/hardware.h>
 #include <asm/atomic.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
-#include <asm/hardware/clock.h>
 #include <asm/arch/regs-clock.h>
 
 #include "clock.h"
diff --git a/arch/arm/mach-s3c2410/s3c2440.c b/arch/arm/mach-s3c2410/s3c2440.c
index 4d63e71..b7fe6d9 100644
--- a/arch/arm/mach-s3c2410/s3c2440.c
+++ b/arch/arm/mach-s3c2410/s3c2440.c
@@ -28,6 +28,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/sysdev.h>
+#include <linux/clk.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -36,7 +37,6 @@
 #include <asm/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/hardware/clock.h>
 
 #include <asm/arch/regs-clock.h>
 #include <asm/arch/regs-serial.h>
diff --git a/arch/arm/mach-s3c2410/time.c b/arch/arm/mach-s3c2410/time.c
index 8a00e3c..10a2976 100644
--- a/arch/arm/mach-s3c2410/time.c
+++ b/arch/arm/mach-s3c2410/time.c
@@ -24,6 +24,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/err.h>
+#include <linux/clk.h>
 
 #include <asm/system.h>
 #include <asm/leds.h>
@@ -35,7 +36,6 @@
 #include <asm/arch/regs-timer.h>
 #include <asm/arch/regs-irq.h>
 #include <asm/mach/time.h>
-#include <asm/hardware/clock.h>
 
 #include "clock.h"
 #include "cpu.h"
@@ -191,7 +191,6 @@ static void s3c2410_timer_setup (void)
 		if (IS_ERR(clk))
 			panic("failed to get clock for system timer");
 
-		clk_use(clk);
 		clk_enable(clk);
 
 		pclk = clk_get_rate(clk);
diff --git a/arch/arm/mach-sa1100/pm.c b/arch/arm/mach-sa1100/pm.c
index 59c7964..786c853 100644
--- a/arch/arm/mach-sa1100/pm.c
+++ b/arch/arm/mach-sa1100/pm.c
@@ -135,29 +135,11 @@ unsigned long sleep_phys_sp(void *sp)
 }
 
 /*
- * Called after processes are frozen, but before we shut down devices.
- */
-static int sa11x0_pm_prepare(suspend_state_t state)
-{
-	return 0;
-}
-
-/*
- * Called after devices are re-setup, but before processes are thawed.
- */
-static int sa11x0_pm_finish(suspend_state_t state)
-{
-	return 0;
-}
-
-/*
  * Set to PM_DISK_FIRMWARE so we can quickly veto suspend-to-disk.
  */
 static struct pm_ops sa11x0_pm_ops = {
 	.pm_disk_mode	= PM_DISK_FIRMWARE,
-	.prepare	= sa11x0_pm_prepare,
 	.enter		= sa11x0_pm_enter,
-	.finish		= sa11x0_pm_finish,
 };
 
 static int __init sa11x0_pm_init(void)
diff --git a/arch/arm/mach-versatile/clock.c b/arch/arm/mach-versatile/clock.c
index b96a2ea..dcf1001 100644
--- a/arch/arm/mach-versatile/clock.c
+++ b/arch/arm/mach-versatile/clock.c
@@ -14,9 +14,9 @@
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/string.h>
+#include <linux/clk.h>
 
 #include <asm/semaphore.h>
-#include <asm/hardware/clock.h>
 #include <asm/hardware/icst307.h>
 
 #include "clock.h"
@@ -58,17 +58,6 @@ void clk_disable(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_disable);
 
-int clk_use(struct clk *clk)
-{
-	return 0;
-}
-EXPORT_SYMBOL(clk_use);
-
-void clk_unuse(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_unuse);
-
 unsigned long clk_get_rate(struct clk *clk)
 {
 	return clk->rate;
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index a1ca466..9002374 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -25,14 +25,14 @@
 #include <linux/platform_device.h>
 #include <linux/sysdev.h>
 #include <linux/interrupt.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/clcd.h>
 
 #include <asm/system.h>
 #include <asm/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/leds.h>
-#include <asm/hardware/amba.h>
-#include <asm/hardware/amba_clcd.h>
 #include <asm/hardware/arm_timer.h>
 #include <asm/hardware/icst307.h>
 
diff --git a/arch/arm/mach-versatile/core.h b/arch/arm/mach-versatile/core.h
index 588c206..afcaa85 100644
--- a/arch/arm/mach-versatile/core.h
+++ b/arch/arm/mach-versatile/core.h
@@ -22,7 +22,7 @@
 #ifndef __ASM_ARCH_VERSATILE_H
 #define __ASM_ARCH_VERSATILE_H
 
-#include <asm/hardware/amba.h>
+#include <linux/amba/bus.h>
 
 extern void __init versatile_init(void);
 extern void __init versatile_init_irq(void);
diff --git a/arch/arm/mach-versatile/versatile_ab.c b/arch/arm/mach-versatile/versatile_ab.c
index 8b0b3be..e74c8a2 100644
--- a/arch/arm/mach-versatile/versatile_ab.c
+++ b/arch/arm/mach-versatile/versatile_ab.c
@@ -23,12 +23,12 @@
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/sysdev.h>
+#include <linux/amba/bus.h>
 
 #include <asm/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
-#include <asm/hardware/amba.h>
 
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c
index 7c3078c..22d5ca0 100644
--- a/arch/arm/mach-versatile/versatile_pb.c
+++ b/arch/arm/mach-versatile/versatile_pb.c
@@ -23,12 +23,12 @@
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/sysdev.h>
+#include <linux/amba/bus.h>
 
 #include <asm/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
-#include <asm/hardware/amba.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/mmc.h>
diff --git a/arch/arm/mm/consistent.c b/arch/arm/mm/consistent.c
index dbfe9e8..0513ed1 100644
--- a/arch/arm/mm/consistent.c
+++ b/arch/arm/mm/consistent.c
@@ -19,7 +19,6 @@
 #include <linux/dma-mapping.h>
 
 #include <asm/cacheflush.h>
-#include <asm/io.h>
 #include <asm/tlbflush.h>
 
 #define CONSISTENT_BASE	(0xffc00000)
diff --git a/arch/arm/mm/discontig.c b/arch/arm/mm/discontig.c
index 0d097bb..1e56021 100644
--- a/arch/arm/mm/discontig.c
+++ b/arch/arm/mm/discontig.c
@@ -9,10 +9,8 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-
 #include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/init.h>
+#include <linux/mmzone.h>
 #include <linux/bootmem.h>
 
 #if MAX_NUMNODES != 4 && MAX_NUMNODES != 16
diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c
index 9e50127..d0245a3 100644
--- a/arch/arm/mm/mm-armv.c
+++ b/arch/arm/mm/mm-armv.c
@@ -19,7 +19,6 @@
 
 #include <asm/pgalloc.h>
 #include <asm/page.h>
-#include <asm/io.h>
 #include <asm/setup.h>
 #include <asm/tlbflush.h>
 
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 7ce39b9..84fd656 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -19,10 +19,10 @@
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/string.h>
+#include <linux/clk.h>
 
 #include <asm/io.h>
 #include <asm/semaphore.h>
-#include <asm/hardware/clock.h>
 
 #include <asm/arch/clock.h>
 
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index ccdb452..adffc5a 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -18,12 +18,12 @@
 #include <linux/tty.h>
 #include <linux/serial_8250.h>
 #include <linux/serial_reg.h>
+#include <linux/clk.h>
 
 #include <asm/hardware.h>
 #include <asm/system.h>
 #include <asm/pgtable.h>
 #include <asm/mach/map.h>
-#include <asm/hardware/clock.h>
 #include <asm/io.h>
 #include <asm/setup.h>
 
diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c
index fd894bb..98edc9f 100644
--- a/arch/arm/plat-omap/cpu-omap.c
+++ b/arch/arm/plat-omap/cpu-omap.c
@@ -19,13 +19,12 @@
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/err.h>
+#include <linux/clk.h>
 
 #include <asm/hardware.h>
 #include <asm/io.h>
 #include <asm/system.h>
 
-#include <asm/hardware/clock.h>
-
 /* TODO: Add support for SDRAM timing changes */
 
 int omap_verify_speed(struct cpufreq_policy *policy)
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 76f721d..ca3681a 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -19,9 +19,9 @@
 #include <linux/ptrace.h>
 #include <linux/sysdev.h>
 #include <linux/err.h>
+#include <linux/clk.h>
 
 #include <asm/hardware.h>
-#include <asm/hardware/clock.h>
 #include <asm/irq.h>
 #include <asm/arch/irqs.h>
 #include <asm/arch/gpio.h>
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index ea9475c..be0e0f3 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -19,6 +19,7 @@
 #include <linux/completion.h>
 #include <linux/interrupt.h>
 #include <linux/err.h>
+#include <linux/clk.h>
 
 #include <asm/delay.h>
 #include <asm/io.h>
@@ -30,8 +31,6 @@
 #include <asm/arch/dsp_common.h>
 #include <asm/arch/mcbsp.h>
 
-#include <asm/hardware/clock.h>
-
 #ifdef CONFIG_MCBSP_DEBUG
 #define DBG(x...)	printk(x)
 #else
diff --git a/arch/arm/plat-omap/ocpi.c b/arch/arm/plat-omap/ocpi.c
index b861482..e40fcc8 100644
--- a/arch/arm/plat-omap/ocpi.c
+++ b/arch/arm/plat-omap/ocpi.c
@@ -31,9 +31,9 @@
 #include <linux/init.h>
 #include <linux/spinlock.h>
 #include <linux/err.h>
+#include <linux/clk.h>
 
 #include <asm/io.h>
-#include <asm/hardware/clock.h>
 #include <asm/hardware.h>
 
 #define OCPI_BASE		0xfffec320
diff --git a/drivers/Makefile b/drivers/Makefile
index ea410b6..7fc3f0f 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_ACPI)		+= acpi/
 # PnP must come after ACPI since it will eventually need to check if acpi
 # was used and do nothing if so
 obj-$(CONFIG_PNP)		+= pnp/
+obj-$(CONFIG_ARM_AMBA)		+= amba/
 
 # char/ comes before serial/ etc so that the VT console is the boot-time
 # default.
diff --git a/drivers/amba/Makefile b/drivers/amba/Makefile
new file mode 100644
index 0000000..40fe740
--- /dev/null
+++ b/drivers/amba/Makefile
@@ -0,0 +1,2 @@
+obj-y		+= bus.o
+
diff --git a/arch/arm/common/amba.c b/drivers/amba/bus.c
index c95ec9e..1bbdd16 100644
--- a/arch/arm/common/amba.c
+++ b/drivers/amba/bus.c
@@ -12,10 +12,10 @@
 #include <linux/device.h>
 #include <linux/string.h>
 #include <linux/slab.h>
+#include <linux/amba/bus.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/hardware/amba.h>
 #include <asm/sizes.h>
 
 #define to_amba_device(d)	container_of(d, struct amba_device, dev)
diff --git a/drivers/char/s3c2410-rtc.c b/drivers/char/s3c2410-rtc.c
index 3df7a57..2e30865 100644
--- a/drivers/char/s3c2410-rtc.c
+++ b/drivers/char/s3c2410-rtc.c
@@ -24,6 +24,7 @@
 #include <linux/interrupt.h>
 #include <linux/rtc.h>
 #include <linux/bcd.h>
+#include <linux/clk.h>
 
 #include <asm/hardware.h>
 #include <asm/uaccess.h>
@@ -33,7 +34,6 @@
 
 #include <asm/mach/time.h>
 
-#include <asm/hardware/clock.h>
 #include <asm/arch/regs-rtc.h>
 
 /* need this for the RTC_AF definitions */
diff --git a/drivers/char/watchdog/s3c2410_wdt.c b/drivers/char/watchdog/s3c2410_wdt.c
index eb667da..9dc5473 100644
--- a/drivers/char/watchdog/s3c2410_wdt.c
+++ b/drivers/char/watchdog/s3c2410_wdt.c
@@ -46,12 +46,12 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
+#include <linux/clk.h>
 
 #include <asm/uaccess.h>
 #include <asm/io.h>
 
 #include <asm/arch/map.h>
-#include <asm/hardware/clock.h>
 
 #undef S3C24XX_VA_WATCHDOG
 #define S3C24XX_VA_WATCHDOG (0)
@@ -397,7 +397,6 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
 		return -ENOENT;
 	}
 
-	clk_use(wdt_clock);
 	clk_enable(wdt_clock);
 
 	/* see if we can actually set the requested timer margin, and if
@@ -444,7 +443,6 @@ static int s3c2410wdt_remove(struct platform_device *dev)
 
 	if (wdt_clock != NULL) {
 		clk_disable(wdt_clock);
-		clk_unuse(wdt_clock);
 		clk_put(wdt_clock);
 		wdt_clock = NULL;
 	}
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 58cfd31..f7d40f8 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -34,12 +34,12 @@
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/platform_device.h>
+#include <linux/clk.h>
 
 #include <asm/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
-#include <asm/hardware/clock.h>
 #include <asm/arch/regs-gpio.h>
 #include <asm/arch/regs-iic.h>
 #include <asm/arch/iic.h>
@@ -738,7 +738,6 @@ static void s3c24xx_i2c_free(struct s3c24xx_i2c *i2c)
 {
 	if (i2c->clk != NULL && !IS_ERR(i2c->clk)) {
 		clk_disable(i2c->clk);
-		clk_unuse(i2c->clk);
 		clk_put(i2c->clk);
 		i2c->clk = NULL;
 	}
@@ -778,7 +777,6 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
 
 	dev_dbg(&pdev->dev, "clock source %p\n", i2c->clk);
 
-	clk_use(i2c->clk);
 	clk_enable(i2c->clk);
 
 	/* map the registers */
diff --git a/drivers/input/serio/ambakmi.c b/drivers/input/serio/ambakmi.c
index 9b1ab5e..3df5eed 100644
--- a/drivers/input/serio/ambakmi.c
+++ b/drivers/input/serio/ambakmi.c
@@ -19,12 +19,12 @@
 #include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/err.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/kmi.h>
+#include <linux/clk.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/hardware/amba.h>
-#include <asm/hardware/amba_kmi.h>
-#include <asm/hardware/clock.h>
 
 #define KMI_BASE	(kmi->base)
 
@@ -72,13 +72,9 @@ static int amba_kmi_open(struct serio *io)
 	unsigned int divisor;
 	int ret;
 
-	ret = clk_use(kmi->clk);
-	if (ret)
-		goto out;
-
 	ret = clk_enable(kmi->clk);
 	if (ret)
-		goto clk_unuse;
+		goto out;
 
 	divisor = clk_get_rate(kmi->clk) / 8000000 - 1;
 	writeb(divisor, KMICLKDIV);
@@ -97,8 +93,6 @@ static int amba_kmi_open(struct serio *io)
 
  clk_disable:
 	clk_disable(kmi->clk);
- clk_unuse:
-	clk_unuse(kmi->clk);
  out:
 	return ret;
 }
@@ -111,7 +105,6 @@ static void amba_kmi_close(struct serio *io)
 
 	free_irq(kmi->irq, kmi);
 	clk_disable(kmi->clk);
-	clk_unuse(kmi->clk);
 }
 
 static int amba_kmi_probe(struct amba_device *dev, void *id)
diff --git a/drivers/mmc/mmci.c b/drivers/mmc/mmci.c
index 2b10a2d..634ef53 100644
--- a/drivers/mmc/mmci.c
+++ b/drivers/mmc/mmci.c
@@ -19,14 +19,14 @@
 #include <linux/highmem.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/protocol.h>
+#include <linux/amba/bus.h>
+#include <linux/clk.h>
 
 #include <asm/cacheflush.h>
 #include <asm/div64.h>
 #include <asm/io.h>
 #include <asm/scatterlist.h>
 #include <asm/sizes.h>
-#include <asm/hardware/amba.h>
-#include <asm/hardware/clock.h>
 #include <asm/mach/mmc.h>
 
 #include "mmci.h"
@@ -494,13 +494,9 @@ static int mmci_probe(struct amba_device *dev, void *id)
 		goto host_free;
 	}
 
-	ret = clk_use(host->clk);
-	if (ret)
-		goto clk_free;
-
 	ret = clk_enable(host->clk);
 	if (ret)
-		goto clk_unuse;
+		goto clk_free;
 
 	host->plat = plat;
 	host->mclk = clk_get_rate(host->clk);
@@ -573,8 +569,6 @@ static int mmci_probe(struct amba_device *dev, void *id)
 	iounmap(host->base);
  clk_disable:
 	clk_disable(host->clk);
- clk_unuse:
-	clk_unuse(host->clk);
  clk_free:
 	clk_put(host->clk);
  host_free:
@@ -609,7 +603,6 @@ static int mmci_remove(struct amba_device *dev)
 
 		iounmap(host->base);
 		clk_disable(host->clk);
-		clk_unuse(host->clk);
 		clk_put(host->clk);
 
 		mmc_free_host(mmc);
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index d209214..5b55599 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -53,6 +53,7 @@
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/slab.h>
+#include <linux/clk.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
@@ -60,7 +61,6 @@
 #include <linux/mtd/partitions.h>
 
 #include <asm/io.h>
-#include <asm/hardware/clock.h>
 
 #include <asm/arch/regs-nand.h>
 #include <asm/arch/nand.h>
@@ -460,7 +460,6 @@ static int s3c2410_nand_remove(struct platform_device *pdev)
 
 	if (info->clk != NULL && !IS_ERR(info->clk)) {
 		clk_disable(info->clk);
-		clk_unuse(info->clk);
 		clk_put(info->clk);
 	}
 
@@ -598,7 +597,6 @@ static int s3c24xx_nand_probe(struct platform_device *pdev, int is_s3c2440)
 		goto exit_error;
 	}
 
-	clk_use(info->clk);
 	clk_enable(info->clk);
 
 	/* allocate and map the resource */
diff --git a/drivers/pcmcia/pxa2xx_sharpsl.c b/drivers/pcmcia/pxa2xx_sharpsl.c
index b5fdeec..12a7244 100644
--- a/drivers/pcmcia/pxa2xx_sharpsl.c
+++ b/drivers/pcmcia/pxa2xx_sharpsl.c
@@ -36,9 +36,18 @@
 struct scoop_pcmcia_config *platform_scoop_config;
 #define SCOOP_DEV platform_scoop_config->devs
 
-static void sharpsl_pcmcia_init_reset(struct scoop_pcmcia_dev *scoopdev)
+static void sharpsl_pcmcia_init_reset(struct soc_pcmcia_socket *skt)
 {
+	struct scoop_pcmcia_dev *scoopdev = &SCOOP_DEV[skt->nr];
+
 	reset_scoop(scoopdev->dev);
+
+	/* Shared power controls need to be handled carefully */
+	if (platform_scoop_config->power_ctrl)
+		platform_scoop_config->power_ctrl(scoopdev->dev, 0x0000, skt->nr);
+	else
+		write_scoop_reg(scoopdev->dev, SCOOP_CPR, 0x0000);
+
 	scoopdev->keep_vs = NO_KEEP_VS;
 	scoopdev->keep_rd = 0;
 }
@@ -208,26 +217,17 @@ static int sharpsl_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
 
 static void sharpsl_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
 {
-	sharpsl_pcmcia_init_reset(&SCOOP_DEV[skt->nr]);
+	sharpsl_pcmcia_init_reset(skt);
 
 	/* Enable interrupt */
 	write_scoop_reg(SCOOP_DEV[skt->nr].dev, SCOOP_IMR, 0x00C0);
 	write_scoop_reg(SCOOP_DEV[skt->nr].dev, SCOOP_MCR, 0x0101);
 	SCOOP_DEV[skt->nr].keep_vs = NO_KEEP_VS;
-
-	if (machine_is_collie())
-		/* We need to disable SS_OUTPUT_ENA here. */
-		write_scoop_reg(SCOOP_DEV[skt->nr].dev, SCOOP_CPR, read_scoop_reg(SCOOP_DEV[skt->nr].dev, SCOOP_CPR) & ~0x0080);
 }
 
 static void sharpsl_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
 {
-	/* CF_BUS_OFF */
-	sharpsl_pcmcia_init_reset(&SCOOP_DEV[skt->nr]);
-
-	if (machine_is_collie())
-		/* We need to disable SS_OUTPUT_ENA here. */
-		write_scoop_reg(SCOOP_DEV[skt->nr].dev, SCOOP_CPR, read_scoop_reg(SCOOP_DEV[skt->nr].dev, SCOOP_CPR) & ~0x0080);
+	sharpsl_pcmcia_init_reset(skt);
 }
 
 static struct pcmcia_low_level sharpsl_pcmcia_ops = {
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index ddd0307..48f6e87 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -47,12 +47,12 @@
 #include <linux/tty_flip.h>
 #include <linux/serial_core.h>
 #include <linux/serial.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/serial.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/hardware.h>
-#include <asm/hardware/amba.h>
-#include <asm/hardware/amba_serial.h>
 
 #define UART_NR		2
 
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index d84476e..1296705 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -47,12 +47,12 @@
 #include <linux/tty_flip.h>
 #include <linux/serial_core.h>
 #include <linux/serial.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/serial.h>
+#include <linux/clk.h>
 
 #include <asm/io.h>
 #include <asm/sizes.h>
-#include <asm/hardware/amba.h>
-#include <asm/hardware/clock.h>
-#include <asm/hardware/amba_serial.h>
 
 #define UART_NR			14
 
@@ -761,10 +761,6 @@ static int pl011_probe(struct amba_device *dev, void *id)
 		goto unmap;
 	}
 
-	ret = clk_use(uap->clk);
-	if (ret)
-		goto putclk;
-
 	uap->port.dev = &dev->dev;
 	uap->port.mapbase = dev->res.start;
 	uap->port.membase = base;
@@ -782,8 +778,6 @@ static int pl011_probe(struct amba_device *dev, void *id)
 	if (ret) {
 		amba_set_drvdata(dev, NULL);
 		amba_ports[i] = NULL;
-		clk_unuse(uap->clk);
- putclk:
 		clk_put(uap->clk);
  unmap:
 		iounmap(base);
@@ -808,7 +802,6 @@ static int pl011_remove(struct amba_device *dev)
 			amba_ports[i] = NULL;
 
 	iounmap(uap->port.membase);
-	clk_unuse(uap->clk);
 	clk_put(uap->clk);
 	kfree(uap);
 	return 0;
diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c
index 47681c4..fe83ce6 100644
--- a/drivers/serial/s3c2410.c
+++ b/drivers/serial/s3c2410.c
@@ -72,12 +72,12 @@
 #include <linux/serial_core.h>
 #include <linux/serial.h>
 #include <linux/delay.h>
+#include <linux/clk.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
 
 #include <asm/hardware.h>
-#include <asm/hardware/clock.h>
 
 #include <asm/arch/regs-serial.h>
 #include <asm/arch/regs-gpio.h>
@@ -782,11 +782,9 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
 
 		if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) {
 			clk_disable(ourport->baudclk);
-			clk_unuse(ourport->baudclk);
 			ourport->baudclk  = NULL;
 		}
 
-		clk_use(clk);
 		clk_enable(clk);
 
 		ourport->clksrc = clksrc;
@@ -1077,9 +1075,6 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
 
 	ourport->clk	= clk_get(&platdev->dev, "uart");
 
-	if (ourport->clk != NULL && !IS_ERR(ourport->clk))
-		clk_use(ourport->clk);
-
 	dbg("port: map=%08x, mem=%08x, irq=%d, clock=%ld\n",
 	    port->mapbase, port->membase, port->irq, port->uartclk);
 
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index c9e29d8..3785b3f 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -17,6 +17,7 @@
 #include <linux/signal.h>	/* SA_INTERRUPT */
 #include <linux/jiffies.h>
 #include <linux/platform_device.h>
+#include <linux/clk.h>
 
 #include <asm/hardware.h>
 #include <asm/io.h>
@@ -27,7 +28,6 @@
 #include <asm/arch/gpio.h>
 #include <asm/arch/fpga.h>
 #include <asm/arch/usb.h>
-#include <asm/hardware/clock.h>
 
 
 /* OMAP-1510 OHCI has its own MMU for DMA */
diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c
index 35cc940..372527a 100644
--- a/drivers/usb/host/ohci-s3c2410.c
+++ b/drivers/usb/host/ohci-s3c2410.c
@@ -20,9 +20,9 @@
 */
 
 #include <linux/platform_device.h>
+#include <linux/clk.h>
 
 #include <asm/hardware.h>
-#include <asm/hardware/clock.h>
 #include <asm/arch/usb-control.h>
 
 #define valid_port(idx) ((idx) == 1 || (idx) == 2)
@@ -363,7 +363,6 @@ int usb_hcd_s3c2410_probe (const struct hc_driver *driver,
 		goto err1;
 	}
 
-	clk_use(clk);
 	s3c2410_start_hc(dev, hcd);
 
 	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
@@ -384,7 +383,6 @@ int usb_hcd_s3c2410_probe (const struct hc_driver *driver,
  err2:
 	s3c2410_stop_hc(dev);
 	iounmap(hcd->regs);
-	clk_unuse(clk);
 	clk_put(clk);
 
  err1:
diff --git a/drivers/video/amba-clcd.c b/drivers/video/amba-clcd.c
index a3c2c45..0da4083 100644
--- a/drivers/video/amba-clcd.c
+++ b/drivers/video/amba-clcd.c
@@ -21,12 +21,11 @@
 #include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/list.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/clcd.h>
+#include <linux/clk.h>
 
 #include <asm/sizes.h>
-#include <asm/hardware/amba.h>
-#include <asm/hardware/clock.h>
-
-#include <asm/hardware/amba_clcd.h>
 
 #define to_clcd(info)	container_of(info, struct clcd_fb, fb)
 
@@ -346,10 +345,6 @@ static int clcdfb_register(struct clcd_fb *fb)
 		goto out;
 	}
 
-	ret = clk_use(fb->clk);
-	if (ret)
-		goto free_clk;
-
 	fb->fb.fix.mmio_start	= fb->dev->res.start;
 	fb->fb.fix.mmio_len	= SZ_4K;
 
@@ -357,7 +352,7 @@ static int clcdfb_register(struct clcd_fb *fb)
 	if (!fb->regs) {
 		printk(KERN_ERR "CLCD: unable to remap registers\n");
 		ret = -ENOMEM;
-		goto unuse_clk;
+		goto free_clk;
 	}
 
 	fb->fb.fbops		= &clcdfb_ops;
@@ -427,8 +422,6 @@ static int clcdfb_register(struct clcd_fb *fb)
 	printk(KERN_ERR "CLCD: cannot register framebuffer (%d)\n", ret);
 
 	iounmap(fb->regs);
- unuse_clk:
-	clk_unuse(fb->clk);
  free_clk:
 	clk_put(fb->clk);
  out:
@@ -489,7 +482,6 @@ static int clcdfb_remove(struct amba_device *dev)
 	clcdfb_disable(fb);
 	unregister_framebuffer(&fb->fb);
 	iounmap(fb->regs);
-	clk_unuse(fb->clk);
 	clk_put(fb->clk);
 
 	fb->board->remove(fb);
diff --git a/drivers/video/backlight/corgi_bl.c b/drivers/video/backlight/corgi_bl.c
index 6a219b2..d0aaf45 100644
--- a/drivers/video/backlight/corgi_bl.c
+++ b/drivers/video/backlight/corgi_bl.c
@@ -20,6 +20,7 @@
 #include <linux/backlight.h>
 
 #include <asm/arch/sharpsl.h>
+#include <asm/hardware/sharpsl_pm.h>
 
 #define CORGI_DEFAULT_INTENSITY		0x1f
 #define CORGI_LIMIT_MASK		0x0b
diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
index 5924cc2..1718baa 100644
--- a/drivers/video/imxfb.c
+++ b/drivers/video/imxfb.c
@@ -554,7 +554,7 @@ static int __init imxfb_probe(struct platform_device *pdev)
 
 	inf = pdev->dev.platform_data;
 	if(!inf) {
-		dev_err(dev,"No platform_data available\n");
+		dev_err(&pdev->dev,"No platform_data available\n");
 		return -ENOMEM;
 	}
 
@@ -579,7 +579,7 @@ static int __init imxfb_probe(struct platform_device *pdev)
 	if (!inf->fixed_screen_cpu) {
 		ret = imxfb_map_video_memory(info);
 		if (ret) {
-			dev_err(dev, "Failed to allocate video RAM: %d\n", ret);
+			dev_err(&pdev->dev, "Failed to allocate video RAM: %d\n", ret);
 			ret = -ENOMEM;
 			goto failed_map;
 		}
@@ -608,7 +608,7 @@ static int __init imxfb_probe(struct platform_device *pdev)
 	imxfb_set_par(info);
 	ret = register_framebuffer(info);
 	if (ret < 0) {
-		dev_err(dev, "failed to register framebuffer\n");
+		dev_err(&pdev->dev, "failed to register framebuffer\n");
 		goto failed_register;
 	}
 
diff --git a/drivers/video/s3c2410fb.c b/drivers/video/s3c2410fb.c
index ce6e749..fe99d17 100644
--- a/drivers/video/s3c2410fb.c
+++ b/drivers/video/s3c2410fb.c
@@ -87,6 +87,7 @@
 #include <linux/workqueue.h>
 #include <linux/wait.h>
 #include <linux/platform_device.h>
+#include <linux/clk.h>
 
 #include <asm/io.h>
 #include <asm/uaccess.h>
@@ -96,7 +97,6 @@
 #include <asm/arch/regs-lcd.h>
 #include <asm/arch/regs-gpio.h>
 #include <asm/arch/fb.h>
-#include <asm/hardware/clock.h>
 
 #ifdef CONFIG_PM
 #include <linux/pm.h>
@@ -746,7 +746,6 @@ int __init s3c2410fb_probe(struct platform_device *pdev)
 		goto release_irq;
 	}
 
-	clk_use(info->clk);
 	clk_enable(info->clk);
 	dprintk("got and enabled clock\n");
 
@@ -783,7 +782,6 @@ free_video_memory:
 	s3c2410fb_unmap_video_memory(info);
 release_clock:
 	clk_disable(info->clk);
-	clk_unuse(info->clk);
 	clk_put(info->clk);
 release_irq:
 	free_irq(irq,info);
@@ -828,7 +826,6 @@ static int s3c2410fb_remove(struct platform_device *pdev)
 
  	if (info->clk) {
  		clk_disable(info->clk);
- 		clk_unuse(info->clk);
  		clk_put(info->clk);
  		info->clk = NULL;
 	}
diff --git a/include/asm-arm/arch-aaec2000/dma.h b/include/asm-arm/arch-aaec2000/dma.h
index 28c890b..e100b1e 100644
--- a/include/asm-arm/arch-aaec2000/dma.h
+++ b/include/asm-arm/arch-aaec2000/dma.h
@@ -7,11 +7,3 @@
  *  it under the terms of the GNU General Public License version 2 as
  *  published by the Free Software Foundation.
  */
-
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#define MAX_DMA_ADDRESS         0xffffffff
-#define MAX_DMA_CHANNELS        0
-
-#endif
diff --git a/include/asm-arm/arch-cl7500/dma.h b/include/asm-arm/arch-cl7500/dma.h
index 1d6a882..591ed25 100644
--- a/include/asm-arm/arch-cl7500/dma.h
+++ b/include/asm-arm/arch-cl7500/dma.h
@@ -15,7 +15,6 @@
  * bytes of RAM.
  */
 #define MAX_DMA_ADDRESS		0xd0000000
-#define MAX_DMA_CHANNELS	0
 
 #define DMA_S0			0
 
diff --git a/include/asm-arm/arch-cl7500/entry-macro.S b/include/asm-arm/arch-cl7500/entry-macro.S
index 686f413..c9e5395 100644
--- a/include/asm-arm/arch-cl7500/entry-macro.S
+++ b/include/asm-arm/arch-cl7500/entry-macro.S
@@ -1,3 +1,3 @@
-
+#include <asm/hardware.h>
 #include <asm/hardware/entry-macro-iomd.S>
 
diff --git a/include/asm-arm/arch-clps711x/dma.h b/include/asm-arm/arch-clps711x/dma.h
index 3c4c5c8..6109979 100644
--- a/include/asm-arm/arch-clps711x/dma.h
+++ b/include/asm-arm/arch-clps711x/dma.h
@@ -17,12 +17,3 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#define MAX_DMA_ADDRESS		0xffffffff
-
-#define MAX_DMA_CHANNELS	0
-
-#endif /* _ASM_ARCH_DMA_H */
-
diff --git a/include/asm-arm/arch-clps711x/entry-macro.S b/include/asm-arm/arch-clps711x/entry-macro.S
index b31079a..21f6ee4 100644
--- a/include/asm-arm/arch-clps711x/entry-macro.S
+++ b/include/asm-arm/arch-clps711x/entry-macro.S
@@ -7,6 +7,7 @@
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
+#include <asm/hardware.h>
 #include <asm/hardware/clps7111.h>
 
 		.macro	disable_fiq
diff --git a/include/asm-arm/arch-clps711x/system.h b/include/asm-arm/arch-clps711x/system.h
index 2ab981f..11e1491 100644
--- a/include/asm-arm/arch-clps711x/system.h
+++ b/include/asm-arm/arch-clps711x/system.h
@@ -20,7 +20,9 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
+#include <asm/hardware.h>
 #include <asm/hardware/clps7111.h>
+#include <asm/io.h>
 
 static inline void arch_idle(void)
 {
diff --git a/include/asm-arm/arch-ebsa110/dma.h b/include/asm-arm/arch-ebsa110/dma.h
index d491776..c52f9e2a 100644
--- a/include/asm-arm/arch-ebsa110/dma.h
+++ b/include/asm-arm/arch-ebsa110/dma.h
@@ -9,11 +9,3 @@
  *
  *  EBSA110 DMA definitions
  */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#define MAX_DMA_ADDRESS		0xffffffff
-#define MAX_DMA_CHANNELS	0
-
-#endif /* _ASM_ARCH_DMA_H */
-
diff --git a/include/asm-arm/arch-ebsa285/dma.h b/include/asm-arm/arch-ebsa285/dma.h
index c43046e..0259ad4 100644
--- a/include/asm-arm/arch-ebsa285/dma.h
+++ b/include/asm-arm/arch-ebsa285/dma.h
@@ -10,11 +10,6 @@
 #define __ASM_ARCH_DMA_H
 
 /*
- * This is the maximum DMA address that can be DMAd to.
- */
-#define MAX_DMA_ADDRESS		0xffffffff
-
-/*
  * The 21285 has two internal DMA channels; we call these 8 and 9.
  * On CATS hardware we have an additional eight ISA dma channels
  * numbered 0..7.
diff --git a/include/asm-arm/arch-ebsa285/entry-macro.S b/include/asm-arm/arch-ebsa285/entry-macro.S
index db5729f..cf10ac9 100644
--- a/include/asm-arm/arch-ebsa285/entry-macro.S
+++ b/include/asm-arm/arch-ebsa285/entry-macro.S
@@ -7,6 +7,8 @@
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
+#include <asm/hardware.h>
+#include <asm/arch/irqs.h>
 #include <asm/hardware/dec21285.h>
 
 		.macro	disable_fiq
diff --git a/include/asm-arm/arch-epxa10db/dma.h b/include/asm-arm/arch-epxa10db/dma.h
index 5d97734..de20ec8 100644
--- a/include/asm-arm/arch-epxa10db/dma.h
+++ b/include/asm-arm/arch-epxa10db/dma.h
@@ -17,12 +17,3 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#define MAX_DMA_ADDRESS		0xffffffff
-
-#define MAX_DMA_CHANNELS	0
-
-#endif /* _ASM_ARCH_DMA_H */
-
diff --git a/include/asm-arm/arch-imx/dma.h b/include/asm-arm/arch-imx/dma.h
index dbdc017..b45fa36 100644
--- a/include/asm-arm/arch-imx/dma.h
+++ b/include/asm-arm/arch-imx/dma.h
@@ -20,10 +20,6 @@
 #ifndef __ASM_ARCH_DMA_H
 #define __ASM_ARCH_DMA_H
 
-#define MAX_DMA_ADDRESS		0xffffffff
-
-#define MAX_DMA_CHANNELS	0
-
 /*
  * DMA registration
  */
diff --git a/include/asm-arm/arch-imx/entry-macro.S b/include/asm-arm/arch-imx/entry-macro.S
index b40ea7c..3b9ef69 100644
--- a/include/asm-arm/arch-imx/entry-macro.S
+++ b/include/asm-arm/arch-imx/entry-macro.S
@@ -7,6 +7,8 @@
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
+#include <asm/hardware.h>
+
 		.macro	disable_fiq
 		.endm
 #define AITC_NIVECSR   0x40
diff --git a/include/asm-arm/arch-integrator/debug-macro.S b/include/asm-arm/arch-integrator/debug-macro.S
index 484a1aa..031d309 100644
--- a/include/asm-arm/arch-integrator/debug-macro.S
+++ b/include/asm-arm/arch-integrator/debug-macro.S
@@ -11,7 +11,7 @@
  *
 */
 
-#include <asm/hardware/amba_serial.h>
+#include <linux/amba/serial.h>
 
 		.macro	addruart,rx
 		mrc	p15, 0, \rx, c1, c0
diff --git a/include/asm-arm/arch-integrator/dma.h b/include/asm-arm/arch-integrator/dma.h
index 7171792..83fd6bb 100644
--- a/include/asm-arm/arch-integrator/dma.h
+++ b/include/asm-arm/arch-integrator/dma.h
@@ -17,12 +17,3 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#define MAX_DMA_ADDRESS		0xffffffff
-
-#define MAX_DMA_CHANNELS	0
-
-#endif /* _ASM_ARCH_DMA_H */
-
diff --git a/include/asm-arm/arch-integrator/entry-macro.S b/include/asm-arm/arch-integrator/entry-macro.S
index 44f7ee6..69838d0 100644
--- a/include/asm-arm/arch-integrator/entry-macro.S
+++ b/include/asm-arm/arch-integrator/entry-macro.S
@@ -7,6 +7,8 @@
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
+#include <asm/hardware.h>
+#include <asm/arch/irqs.h>
 
  		.macro	disable_fiq
 		.endm
diff --git a/include/asm-arm/arch-iop3xx/dma.h b/include/asm-arm/arch-iop3xx/dma.h
index 797f9e6..1e808db 100644
--- a/include/asm-arm/arch-iop3xx/dma.h
+++ b/include/asm-arm/arch-iop3xx/dma.h
@@ -7,10 +7,3 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-
-#ifndef _IOP3XX_DMA_H_P
-#define _IOP3XX_DMA_H_P
-
-#define MAX_DMA_ADDRESS		0xffffffff
-
-#endif /* _ASM_ARCH_DMA_H_P */
diff --git a/include/asm-arm/arch-iop3xx/entry-macro.S b/include/asm-arm/arch-iop3xx/entry-macro.S
index e2ce7f5..926668c 100644
--- a/include/asm-arm/arch-iop3xx/entry-macro.S
+++ b/include/asm-arm/arch-iop3xx/entry-macro.S
@@ -7,6 +7,7 @@
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
+#include <asm/arch/irqs.h>
 
 #if defined(CONFIG_ARCH_IOP321)
 		.macro  disable_fiq
diff --git a/include/asm-arm/arch-ixp2000/dma.h b/include/asm-arm/arch-ixp2000/dma.h
index 0fb3568..548d8dc 100644
--- a/include/asm-arm/arch-ixp2000/dma.h
+++ b/include/asm-arm/arch-ixp2000/dma.h
@@ -7,12 +7,3 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#define MAX_DMA_ADDRESS		0xffffffff
-
-/* No DMA */
-#define MAX_DMA_CHANNELS	0
-
-#endif /* _ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-ixp2000/enp2611.h b/include/asm-arm/arch-ixp2000/enp2611.h
index 95128d9..42f3c28 100644
--- a/include/asm-arm/arch-ixp2000/enp2611.h
+++ b/include/asm-arm/arch-ixp2000/enp2611.h
@@ -36,5 +36,11 @@
 #define ENP2611_GPIO_SCL		7
 #define ENP2611_GPIO_SDA		6
 
+#define IRQ_ENP2611_THERMAL		IRQ_IXP2000_GPIO4
+#define IRQ_ENP2611_OPTION_BOARD	IRQ_IXP2000_GPIO3
+#define IRQ_ENP2611_CALEB		IRQ_IXP2000_GPIO2
+#define IRQ_ENP2611_PM3386_1		IRQ_IXP2000_GPIO1
+#define IRQ_ENP2611_PM3386_0		IRQ_IXP2000_GPIO0
+
 
 #endif
diff --git a/include/asm-arm/arch-ixp2000/entry-macro.S b/include/asm-arm/arch-ixp2000/entry-macro.S
index e3a4e41..16e1e61 100644
--- a/include/asm-arm/arch-ixp2000/entry-macro.S
+++ b/include/asm-arm/arch-ixp2000/entry-macro.S
@@ -7,6 +7,7 @@
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
+#include <asm/arch/irqs.h>
 
 		.macro  disable_fiq
 		.endm
diff --git a/include/asm-arm/arch-ixp2000/io.h b/include/asm-arm/arch-ixp2000/io.h
index 7fbcdf9..c0ff2c6 100644
--- a/include/asm-arm/arch-ixp2000/io.h
+++ b/include/asm-arm/arch-ixp2000/io.h
@@ -131,102 +131,4 @@
 #endif
 
 
-#ifdef CONFIG_ARCH_IXDP2X01
-/*
- * This is an ugly hack but the CS8900 on the 2x01's does not sit in any sort
- * of "I/O space" and is just direct mapped into a 32-bit-only addressable
- * bus. The address space for this bus is such that we can't really easily
- * make it contiguous to the PCI I/O address range, and it also does not
- * need swapping like PCI addresses do (IXDP2x01 is a BE platform).
- * B/C of this we can't use the standard in/out functions and need to
- * runtime check if the incoming address is a PCI address or for
- * the CS89x0.
- */
-#undef inw
-#undef outw
-#undef insw
-#undef outsw
-
-#include <asm/mach-types.h>
-
-static inline void insw(u32 ptr, void *buf, int length)
-{
-	register volatile u32 *port = (volatile u32 *)ptr;
-
-	/*
-	 * Is this cycle meant for the CS8900?
-	 */
-	if ((machine_is_ixdp2401() || machine_is_ixdp2801()) && 
-		(((u32)port >= (u32)IXDP2X01_CS8900_VIRT_BASE) &&
-		 ((u32)port <= (u32)IXDP2X01_CS8900_VIRT_END))) {
-		u8 *buf8 = (u8*)buf;
-		register u32 tmp32;
-
-		do {
-			tmp32 = *port;
-			*buf8++ = (u8)tmp32;
-			*buf8++ = (u8)(tmp32 >> 8);
-		} while(--length);
-
-		return;
-	}
-
-	__raw_readsw(alignw(___io(ptr)),buf,length);
-}
-
-static inline void outsw(u32 ptr, void *buf, int length)
-{
-	register volatile u32 *port = (volatile u32 *)ptr;
-
-	/*
-	 * Is this cycle meant for the CS8900?
-	 */
-	if ((machine_is_ixdp2401() || machine_is_ixdp2801()) && 
-		(((u32)port >= (u32)IXDP2X01_CS8900_VIRT_BASE) &&
-		 ((u32)port <= (u32)IXDP2X01_CS8900_VIRT_END))) {
-		register u32 tmp32;
-		u8 *buf8 = (u8*)buf;
-		do {
-			tmp32 = *buf8++;
-			tmp32 |= (*buf8++) << 8;
-			*port = tmp32;
-		} while(--length);
-		return;
-	}
-
-	__raw_writesw(alignw(___io(ptr)),buf,length);
-}
-
-
-static inline u16 inw(u32 ptr)
-{
-	register volatile u32 *port = (volatile u32 *)ptr;
-
-	/*
-	 * Is this cycle meant for the CS8900?
-	 */
-	if ((machine_is_ixdp2401() || machine_is_ixdp2801()) && 
-		(((u32)port >= (u32)IXDP2X01_CS8900_VIRT_BASE) &&
-		 ((u32)port <= (u32)IXDP2X01_CS8900_VIRT_END))) {
-		return (u16)(*port);  
-	}
-
-	return __raw_readw(alignw(___io(ptr)));
-}
-
-static inline void outw(u16 value, u32 ptr)
-{
-	register volatile u32 *port = (volatile u32 *)ptr;
-
-	if ((machine_is_ixdp2401() || machine_is_ixdp2801()) && 
-		(((u32)port >= (u32)IXDP2X01_CS8900_VIRT_BASE) &&
-		 ((u32)port <= (u32)IXDP2X01_CS8900_VIRT_END))) {
-		*port = value;  
-		return;
-	}
-
-	__raw_writew((value),alignw(___io(ptr)));
-}
-#endif	/* IXDP2x01 */
-
 #endif
diff --git a/include/asm-arm/arch-ixp2000/ixp2000-regs.h b/include/asm-arm/arch-ixp2000/ixp2000-regs.h
index fc5ac6a..8cf70ff 100644
--- a/include/asm-arm/arch-ixp2000/ixp2000-regs.h
+++ b/include/asm-arm/arch-ixp2000/ixp2000-regs.h
@@ -156,6 +156,14 @@
 #define IXP2000_IRQ_THD_RAW_STATUS_B_1	IXP2000_INTCTL_REG(0x84)
 #define IXP2000_IRQ_THD_RAW_STATUS_B_2	IXP2000_INTCTL_REG(0x88)
 #define IXP2000_IRQ_THD_RAW_STATUS_B_3	IXP2000_INTCTL_REG(0x8c)
+#define IXP2000_IRQ_THD_STATUS_A_0	IXP2000_INTCTL_REG(0xe0)
+#define IXP2000_IRQ_THD_STATUS_A_1	IXP2000_INTCTL_REG(0xe4)
+#define IXP2000_IRQ_THD_STATUS_A_2	IXP2000_INTCTL_REG(0xe8)
+#define IXP2000_IRQ_THD_STATUS_A_3	IXP2000_INTCTL_REG(0xec)
+#define IXP2000_IRQ_THD_STATUS_B_0	IXP2000_INTCTL_REG(0x100)
+#define IXP2000_IRQ_THD_STATUS_B_1	IXP2000_INTCTL_REG(0x104)
+#define IXP2000_IRQ_THD_STATUS_B_2	IXP2000_INTCTL_REG(0x108)
+#define IXP2000_IRQ_THD_STATUS_B_3	IXP2000_INTCTL_REG(0x10c)
 #define IXP2000_IRQ_THD_ENABLE_SET_A_0	IXP2000_INTCTL_REG(0x160)
 #define IXP2000_IRQ_THD_ENABLE_SET_A_1	IXP2000_INTCTL_REG(0x164)
 #define IXP2000_IRQ_THD_ENABLE_SET_A_2	IXP2000_INTCTL_REG(0x168)
diff --git a/include/asm-arm/arch-ixp4xx/coyote.h b/include/asm-arm/arch-ixp4xx/coyote.h
index dd0c2d2..7ac9ba2 100644
--- a/include/asm-arm/arch-ixp4xx/coyote.h
+++ b/include/asm-arm/arch-ixp4xx/coyote.h
@@ -16,9 +16,6 @@
 #error "Do not include this directly, instead #include <asm/hardware.h>"
 #endif
 
-#define	COYOTE_FLASH_BASE	IXP4XX_EXP_BUS_CS0_BASE_PHYS
-#define	COYOTE_FLASH_SIZE	IXP4XX_EXP_BUS_CSX_REGION_SIZE * 2
-
 /* PCI controller GPIO to IRQ pin mappings */
 #define	COYOTE_PCI_SLOT0_PIN	6
 #define	COYOTE_PCI_SLOT1_PIN	11
@@ -26,7 +23,7 @@
 #define	COYOTE_PCI_SLOT0_DEVID	14
 #define	COYOTE_PCI_SLOT1_DEVID	15
 
-#define	COYOTE_IDE_BASE_PHYS	IXP4XX_EXP_BUS_CS3_BASE_PHYS
+#define	COYOTE_IDE_BASE_PHYS	IXP4XX_EXP_BUS_BASE(3)
 #define	COYOTE_IDE_BASE_VIRT	0xFFFE1000
 #define	COYOTE_IDE_REGION_SIZE	0x1000
 
diff --git a/include/asm-arm/arch-ixp4xx/dma.h b/include/asm-arm/arch-ixp4xx/dma.h
index 312065d..b1a071e 100644
--- a/include/asm-arm/arch-ixp4xx/dma.h
+++ b/include/asm-arm/arch-ixp4xx/dma.h
@@ -20,7 +20,4 @@
 
 #define MAX_DMA_ADDRESS		(PAGE_OFFSET + SZ_64M)
 
-/* No DMA */
-#define MAX_DMA_CHANNELS	0
-
 #endif /* _ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-ixp4xx/entry-macro.S b/include/asm-arm/arch-ixp4xx/entry-macro.S
index 323b0bc..27e1241 100644
--- a/include/asm-arm/arch-ixp4xx/entry-macro.S
+++ b/include/asm-arm/arch-ixp4xx/entry-macro.S
@@ -7,6 +7,7 @@
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
+#include <asm/hardware.h>
 
 		.macro	disable_fiq
 		.endm
diff --git a/include/asm-arm/arch-ixp4xx/gtwx5715.h b/include/asm-arm/arch-ixp4xx/gtwx5715.h
index fc460af..c3069d6 100644
--- a/include/asm-arm/arch-ixp4xx/gtwx5715.h
+++ b/include/asm-arm/arch-ixp4xx/gtwx5715.h
@@ -57,10 +57,6 @@
 #define GTWX5715_GPIO13_IRQ		IRQ_IXP4XX_SW_INT1
 #define GTWX5715_GPIO14_IRQ		IRQ_IXP4XX_SW_INT2
 
-
-#define	GTWX5715_FLASH_BASE	IXP4XX_EXP_BUS_CS0_BASE_PHYS
-#define	GTWX5715_FLASH_SIZE	(0x00800000)
-
 /* PCI controller GPIO to IRQ pin mappings
 
 			INTA	INTB
diff --git a/include/asm-arm/arch-ixp4xx/hardware.h b/include/asm-arm/arch-ixp4xx/hardware.h
index cfb413c..6acb69c 100644
--- a/include/asm-arm/arch-ixp4xx/hardware.h
+++ b/include/asm-arm/arch-ixp4xx/hardware.h
@@ -45,5 +45,6 @@ extern unsigned int processor_id;
 #include "coyote.h"
 #include "prpmc1100.h"
 #include "nslu2.h"
+#include "nas100d.h"
 
 #endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-ixp4xx/irqs.h b/include/asm-arm/arch-ixp4xx/irqs.h
index 2cf4930..f24b763 100644
--- a/include/asm-arm/arch-ixp4xx/irqs.h
+++ b/include/asm-arm/arch-ixp4xx/irqs.h
@@ -100,4 +100,13 @@
 #define        IRQ_NSLU2_PCI_INTB      IRQ_IXP4XX_GPIO10
 #define        IRQ_NSLU2_PCI_INTC      IRQ_IXP4XX_GPIO9
 
+/*
+ * NAS100D board IRQs
+ */
+#define        IRQ_NAS100D_PCI_INTA    IRQ_IXP4XX_GPIO11
+#define        IRQ_NAS100D_PCI_INTB    IRQ_IXP4XX_GPIO10
+#define        IRQ_NAS100D_PCI_INTC    IRQ_IXP4XX_GPIO9
+#define        IRQ_NAS100D_PCI_INTD    IRQ_IXP4XX_GPIO8
+#define        IRQ_NAS100D_PCI_INTE    IRQ_IXP4XX_GPIO7
+
 #endif
diff --git a/include/asm-arm/arch-ixp4xx/ixdp425.h b/include/asm-arm/arch-ixp4xx/ixdp425.h
index 7d21bf9..3d3820d 100644
--- a/include/asm-arm/arch-ixp4xx/ixdp425.h
+++ b/include/asm-arm/arch-ixp4xx/ixdp425.h
@@ -16,9 +16,6 @@
 #error "Do not include this directly, instead #include <asm/hardware.h>"
 #endif
 
-#define	IXDP425_FLASH_BASE	IXP4XX_EXP_BUS_CS0_BASE_PHYS
-#define	IXDP425_FLASH_SIZE	IXP4XX_EXP_BUS_CSX_REGION_SIZE
-
 #define	IXDP425_SDA_PIN		7
 #define	IXDP425_SCL_PIN		6
 
diff --git a/include/asm-arm/arch-ixp4xx/memory.h b/include/asm-arm/arch-ixp4xx/memory.h
index e024d0a..ee211d2 100644
--- a/include/asm-arm/arch-ixp4xx/memory.h
+++ b/include/asm-arm/arch-ixp4xx/memory.h
@@ -16,31 +16,10 @@
 
 #ifndef __ASSEMBLY__
 
-/*
- * Only first 64MB of memory can be accessed via PCI.
- * We use GFP_DMA to allocate safe buffers to do map/unmap.
- * This is really ugly and we need a better way of specifying
- * DMA-capable regions of memory.
- */
-static inline void __arch_adjust_zones(int node, unsigned long *zone_size, 
-	unsigned long *zhole_size) 
-{
-	unsigned int sz = SZ_64M >> PAGE_SHIFT;
-
-	/*
-	 * Only adjust if > 64M on current system
-	 */
-	if (node || (zone_size[0] <= sz))
-		return;
-
-	zone_size[1] = zone_size[0] - sz;
-	zone_size[0] = sz;
-	zhole_size[1] = zhole_size[0];
-	zhole_size[0] = 0;
-}
+void ixp4xx_adjust_zones(int node, unsigned long *size, unsigned long *holes);
 
 #define arch_adjust_zones(node, size, holes) \
-	__arch_adjust_zones(node, size, holes)
+	ixp4xx_adjust_zones(node, size, holes)
 
 #define ISA_DMA_THRESHOLD (SZ_64M - 1)
 
diff --git a/include/asm-arm/arch-ixp4xx/nas100d.h b/include/asm-arm/arch-ixp4xx/nas100d.h
new file mode 100644
index 0000000..51ac018
--- /dev/null
+++ b/include/asm-arm/arch-ixp4xx/nas100d.h
@@ -0,0 +1,72 @@
+/*
+ * include/asm-arm/arch-ixp4xx/nas100d.h
+ *
+ * NAS100D platform specific definitions
+ *
+ * Copyright (c) 2005 Tower Technologies
+ *
+ * Author: Alessandro Zummo <a.zummo@towertech.it>
+ *
+ * based on ixdp425.h:
+ *	Copyright 2004 (c) MontaVista, Software, Inc.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <asm/hardware.h>"
+#endif
+
+#define NAS100D_SDA_PIN		6
+#define NAS100D_SCL_PIN		5
+
+/*
+ * NAS100D PCI IRQs
+ */
+#define NAS100D_PCI_MAX_DEV	3
+#define NAS100D_PCI_IRQ_LINES	3
+
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define NAS100D_PCI_INTA_PIN	11
+#define NAS100D_PCI_INTB_PIN	10
+#define NAS100D_PCI_INTC_PIN	9
+#define NAS100D_PCI_INTD_PIN	8
+#define NAS100D_PCI_INTE_PIN	7
+
+/* GPIO */
+
+#define NAS100D_GPIO0           0
+#define NAS100D_GPIO1           1
+#define NAS100D_GPIO2           2
+#define NAS100D_GPIO3           3
+#define NAS100D_GPIO4           4
+#define NAS100D_GPIO5           5
+#define NAS100D_GPIO6           6
+#define NAS100D_GPIO7           7
+#define NAS100D_GPIO8           8
+#define NAS100D_GPIO9           9
+#define NAS100D_GPIO10          10
+#define NAS100D_GPIO11          11
+#define NAS100D_GPIO12          12
+#define NAS100D_GPIO13          13
+#define NAS100D_GPIO14          14
+#define NAS100D_GPIO15          15
+
+
+/* Buttons */
+
+#define NAS100D_PB_GPIO         NAS100D_GPIO14
+#define NAS100D_RB_GPIO         NAS100D_GPIO4
+#define NAS100D_PO_GPIO         NAS100D_GPIO12   /* power off */
+
+#define NAS100D_PB_IRQ          IRQ_IXP4XX_GPIO14
+#define NAS100D_RB_IRQ          IRQ_IXP4XX_GPIO4
+
+/*
+#define NAS100D_PB_BM           (1L << NAS100D_PB_GPIO)
+#define NAS100D_PO_BM           (1L << NAS100D_PO_GPIO)
+#define NAS100D_RB_BM           (1L << NAS100D_RB_GPIO)
+*/
diff --git a/include/asm-arm/arch-ixp4xx/nslu2.h b/include/asm-arm/arch-ixp4xx/nslu2.h
index b8b347a..4281838 100644
--- a/include/asm-arm/arch-ixp4xx/nslu2.h
+++ b/include/asm-arm/arch-ixp4xx/nslu2.h
@@ -18,9 +18,6 @@
 #error "Do not include this directly, instead #include <asm/hardware.h>"
 #endif
 
-#define NSLU2_FLASH_BASE	IXP4XX_EXP_BUS_CS0_BASE_PHYS
-#define NSLU2_FLASH_SIZE	IXP4XX_EXP_BUS_CSX_REGION_SIZE
-
 #define NSLU2_SDA_PIN		7
 #define NSLU2_SCL_PIN		6
 
diff --git a/include/asm-arm/arch-ixp4xx/platform.h b/include/asm-arm/arch-ixp4xx/platform.h
index f14ed63..daf9790 100644
--- a/include/asm-arm/arch-ixp4xx/platform.h
+++ b/include/asm-arm/arch-ixp4xx/platform.h
@@ -26,16 +26,17 @@
  */
 #define IXP4XX_EXP_BUS_BASE_PHYS	(0x50000000)
 
-#define	IXP4XX_EXP_BUS_CSX_REGION_SIZE	(0x01000000)
+/*
+ * The expansion bus on the IXP4xx can be configured for either 16 or
+ * 32MB windows and the CS offset for each region changes based on the
+ * current configuration. This means that we cannot simply hardcode
+ * each offset. ixp4xx_sys_init() looks at the expansion bus configuration
+ * as setup by the bootloader to determine our window size.
+ */
+extern unsigned long ixp4xx_exp_bus_size;
 
-#define IXP4XX_EXP_BUS_CS0_BASE_PHYS	(IXP4XX_EXP_BUS_BASE_PHYS + 0x00000000)
-#define IXP4XX_EXP_BUS_CS1_BASE_PHYS	(IXP4XX_EXP_BUS_BASE_PHYS + 0x01000000)
-#define IXP4XX_EXP_BUS_CS2_BASE_PHYS	(IXP4XX_EXP_BUS_BASE_PHYS + 0x02000000)
-#define IXP4XX_EXP_BUS_CS3_BASE_PHYS	(IXP4XX_EXP_BUS_BASE_PHYS + 0x03000000)
-#define IXP4XX_EXP_BUS_CS4_BASE_PHYS	(IXP4XX_EXP_BUS_BASE_PHYS + 0x04000000)
-#define IXP4XX_EXP_BUS_CS5_BASE_PHYS	(IXP4XX_EXP_BUS_BASE_PHYS + 0x05000000)
-#define IXP4XX_EXP_BUS_CS6_BASE_PHYS	(IXP4XX_EXP_BUS_BASE_PHYS + 0x06000000)
-#define IXP4XX_EXP_BUS_CS7_BASE_PHYS	(IXP4XX_EXP_BUS_BASE_PHYS + 0x07000000)
+#define	IXP4XX_EXP_BUS_BASE(region)\
+		(IXP4XX_EXP_BUS_BASE_PHYS + ((region) * ixp4xx_exp_bus_size))
 
 #define IXP4XX_FLASH_WRITABLE	(0x2)
 #define IXP4XX_FLASH_DEFAULT	(0xbcd23c40)
@@ -112,10 +113,5 @@ static inline void gpio_line_set(u8 line, int value)
 	    *IXP4XX_GPIO_GPOUTR &= ~(1 << line);
 }
 
-static inline void gpio_line_isr_clear(u8 line)
-{
-	*IXP4XX_GPIO_GPISR = (1 << line);
-}
-
 #endif // __ASSEMBLY__
 
diff --git a/include/asm-arm/arch-l7200/dma.h b/include/asm-arm/arch-l7200/dma.h
index 6595b38..4c7eca6 100644
--- a/include/asm-arm/arch-l7200/dma.h
+++ b/include/asm-arm/arch-l7200/dma.h
@@ -17,7 +17,6 @@
  * bytes of RAM.
  */
 #define MAX_DMA_ADDRESS         0xd0000000
-#define MAX_DMA_CHANNELS        0
 
 #define DMA_S0                  0
 
diff --git a/include/asm-arm/arch-l7200/system.h b/include/asm-arm/arch-l7200/system.h
index cb4ff29..18825cf 100644
--- a/include/asm-arm/arch-l7200/system.h
+++ b/include/asm-arm/arch-l7200/system.h
@@ -12,6 +12,8 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
+#include <asm/hardware.h>
+
 static inline void arch_idle(void)
 {
 	*(unsigned long *)(IO_BASE + 0x50004) = 1;	/* idle mode */
diff --git a/include/asm-arm/arch-lh7a40x/dma.h b/include/asm-arm/arch-lh7a40x/dma.h
index 5797f01..15492e3 100644
--- a/include/asm-arm/arch-lh7a40x/dma.h
+++ b/include/asm-arm/arch-lh7a40x/dma.h
@@ -7,11 +7,3 @@
  *  version 2 as published by the Free Software Foundation.
  *
  */
-
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#define MAX_DMA_ADDRESS		0xffffffff
-#define MAX_DMA_CHANNELS	0 /* All DMA is internal to CPU */
-
-#endif /* _ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-lh7a40x/entry-macro.S b/include/asm-arm/arch-lh7a40x/entry-macro.S
index 865f396..a2f67c0 100644
--- a/include/asm-arm/arch-lh7a40x/entry-macro.S
+++ b/include/asm-arm/arch-lh7a40x/entry-macro.S
@@ -7,6 +7,8 @@
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
+#include <asm/hardware.h>
+#include <asm/arch/irqs.h>
 
 # if defined (CONFIG_ARCH_LH7A400) && defined (CONFIG_ARCH_LH7A404)
 #  error "LH7A400 and LH7A404 are mutually exclusive"
diff --git a/include/asm-arm/arch-omap/dma.h b/include/asm-arm/arch-omap/dma.h
index ccbcb58..d4e73ef 100644
--- a/include/asm-arm/arch-omap/dma.h
+++ b/include/asm-arm/arch-omap/dma.h
@@ -21,9 +21,6 @@
 #ifndef __ASM_ARCH_DMA_H
 #define __ASM_ARCH_DMA_H
 
-#define MAX_DMA_ADDRESS			0xffffffff
-#define MAX_DMA_CHANNELS		0
-
 /* Hardware registers for omap1 */
 #define OMAP_DMA_BASE			(0xfffed800)
 #define OMAP_DMA_GCR			(OMAP_DMA_BASE + 0x400)
diff --git a/include/asm-arm/arch-omap/entry-macro.S b/include/asm-arm/arch-omap/entry-macro.S
index f8814a8..0ffb118 100644
--- a/include/asm-arm/arch-omap/entry-macro.S
+++ b/include/asm-arm/arch-omap/entry-macro.S
@@ -7,6 +7,8 @@
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
+#include <asm/hardware.h>
+#include <asm/arch/irqs.h>
 
 #if defined(CONFIG_ARCH_OMAP1)
 
diff --git a/include/asm-arm/arch-omap/system.h b/include/asm-arm/arch-omap/system.h
index 9af415d..6724a81 100644
--- a/include/asm-arm/arch-omap/system.h
+++ b/include/asm-arm/arch-omap/system.h
@@ -5,8 +5,9 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 #include <linux/config.h>
+#include <linux/clk.h>
+
 #include <asm/mach-types.h>
-#include <asm/hardware/clock.h>
 #include <asm/hardware.h>
 #include <asm/arch/prcm.h>
 
diff --git a/include/asm-arm/arch-pxa/dma.h b/include/asm-arm/arch-pxa/dma.h
index 56db3d4..3e88a2a 100644
--- a/include/asm-arm/arch-pxa/dma.h
+++ b/include/asm-arm/arch-pxa/dma.h
@@ -12,11 +12,6 @@
 #ifndef __ASM_ARCH_DMA_H
 #define __ASM_ARCH_DMA_H
 
-#define MAX_DMA_ADDRESS		0xffffffff
-
-/* No DMA as the rest of the world see it */
-#define MAX_DMA_CHANNELS	0
-
 /*
  * Descriptor structure for PXA's DMA engine
  * Note: this structure must always be aligned to a 16-byte boundary.
diff --git a/include/asm-arm/arch-pxa/entry-macro.S b/include/asm-arm/arch-pxa/entry-macro.S
index 2abfc8b..4985e33 100644
--- a/include/asm-arm/arch-pxa/entry-macro.S
+++ b/include/asm-arm/arch-pxa/entry-macro.S
@@ -7,6 +7,8 @@
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
+#include <asm/hardware.h>
+#include <asm/arch/irqs.h>
 
 		.macro	disable_fiq
 		.endm
diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h
index a75a247..dae138b 100644
--- a/include/asm-arm/arch-pxa/pxa-regs.h
+++ b/include/asm-arm/arch-pxa/pxa-regs.h
@@ -2042,6 +2042,18 @@
 
 #ifdef CONFIG_PXA27x
 
+#define ARB_CNTRL	__REG(0x48000048)  /* Arbiter Control Register */
+
+#define ARB_DMA_SLV_PARK	(1<<31)	   /* Be parked with DMA slave when idle */
+#define ARB_CI_PARK		(1<<30)	   /* Be parked with Camera Interface when idle */
+#define ARB_EX_MEM_PARK 	(1<<29)	   /* Be parked with external MEMC when idle */
+#define ARB_INT_MEM_PARK	(1<<28)	   /* Be parked with internal MEMC when idle */
+#define ARB_USB_PARK		(1<<27)	   /* Be parked with USB when idle */
+#define ARB_LCD_PARK		(1<<26)	   /* Be parked with LCD when idle */
+#define ARB_DMA_PARK		(1<<25)	   /* Be parked with DMA when idle */
+#define ARB_CORE_PARK		(1<<24)	   /* Be parked with core when idle */
+#define ARB_LOCK_FLAG		(1<<23)	   /* Only Locking masters gain access to the bus */
+
 /*
  * Keypad
  */
diff --git a/include/asm-arm/arch-realview/debug-macro.S b/include/asm-arm/arch-realview/debug-macro.S
index ed28bd0..017ad99 100644
--- a/include/asm-arm/arch-realview/debug-macro.S
+++ b/include/asm-arm/arch-realview/debug-macro.S
@@ -11,7 +11,7 @@
  *
 */
 
-#include <asm/hardware/amba_serial.h>
+#include <linux/amba/serial.h>
 
 		.macro	addruart,rx
 		mrc	p15, 0, \rx, c1, c0
diff --git a/include/asm-arm/arch-realview/dma.h b/include/asm-arm/arch-realview/dma.h
index 744491a..8342e3f 100644
--- a/include/asm-arm/arch-realview/dma.h
+++ b/include/asm-arm/arch-realview/dma.h
@@ -18,10 +18,3 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#define MAX_DMA_ADDRESS		0xffffffff
-#define MAX_DMA_CHANNELS	0
-
-#endif /* _ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-realview/entry-macro.S b/include/asm-arm/arch-realview/entry-macro.S
index 6288fad..1a6eec8 100644
--- a/include/asm-arm/arch-realview/entry-macro.S
+++ b/include/asm-arm/arch-realview/entry-macro.S
@@ -7,7 +7,7 @@
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-
+#include <asm/hardware.h>
 #include <asm/hardware/gic.h>
 
 		.macro	disable_fiq
diff --git a/include/asm-arm/arch-rpc/entry-macro.S b/include/asm-arm/arch-rpc/entry-macro.S
index 686f413..c9e5395 100644
--- a/include/asm-arm/arch-rpc/entry-macro.S
+++ b/include/asm-arm/arch-rpc/entry-macro.S
@@ -1,3 +1,3 @@
-
+#include <asm/hardware.h>
 #include <asm/hardware/entry-macro-iomd.S>
 
diff --git a/include/asm-arm/arch-s3c2410/dma.h b/include/asm-arm/arch-s3c2410/dma.h
index e830a40..b011e14 100644
--- a/include/asm-arm/arch-s3c2410/dma.h
+++ b/include/asm-arm/arch-s3c2410/dma.h
@@ -31,14 +31,6 @@
 #define MAX_DMA_TRANSFER_SIZE   0x100000 /* Data Unit is half word  */
 
 
-/* according to the samsung port, we cannot use the regular
- * dma channels... we must therefore provide our own interface
- * for DMA, and allow our drivers to use that.
- */
-
-#define MAX_DMA_CHANNELS	0
-
-
 /* we have 4 dma channels */
 #define S3C2410_DMA_CHANNELS        (4)
 
diff --git a/include/asm-arm/arch-s3c2410/entry-macro.S b/include/asm-arm/arch-s3c2410/entry-macro.S
index b7d4d7f..cc06b1b 100644
--- a/include/asm-arm/arch-s3c2410/entry-macro.S
+++ b/include/asm-arm/arch-s3c2410/entry-macro.S
@@ -10,6 +10,8 @@
  * Modifications:
  *     10-Mar-2005 LCVR  Changed S3C2410_VA to S3C24XX_VA
  */
+#include <asm/hardware.h>
+#include <asm/arch/irqs.h>
 
 
 	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
diff --git a/include/asm-arm/arch-sa1100/dma.h b/include/asm-arm/arch-sa1100/dma.h
index 3d60ed9..02575d7 100644
--- a/include/asm-arm/arch-sa1100/dma.h
+++ b/include/asm-arm/arch-sa1100/dma.h
@@ -15,20 +15,6 @@
 
 
 /*
- * This is the maximum DMA address that can be DMAd to.
- */
-#define MAX_DMA_ADDRESS		0xffffffff
-
-
-/*
- * The regular generic DMA interface is inappropriate for the
- * SA1100 DMA model.  None of the SA1100 specific drivers using
- * DMA are portable anyway so it's pointless to try to twist the
- * regular DMA API to accommodate them.
- */
-#define MAX_DMA_CHANNELS	0
-
-/*
  * The SA1100 has six internal DMA channels.
  */
 #define SA1100_DMA_CHANNELS	6
diff --git a/include/asm-arm/arch-versatile/debug-macro.S b/include/asm-arm/arch-versatile/debug-macro.S
index 89e38ac..ef61671 100644
--- a/include/asm-arm/arch-versatile/debug-macro.S
+++ b/include/asm-arm/arch-versatile/debug-macro.S
@@ -11,7 +11,7 @@
  *
 */
 
-#include <asm/hardware/amba_serial.h>
+#include <linux/amba/serial.h>
 
 		.macro	addruart,rx
 		mrc	p15, 0, \rx, c1, c0
diff --git a/include/asm-arm/arch-versatile/dma.h b/include/asm-arm/arch-versatile/dma.h
index dcc8ac2..6425773 100644
--- a/include/asm-arm/arch-versatile/dma.h
+++ b/include/asm-arm/arch-versatile/dma.h
@@ -18,10 +18,3 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#define MAX_DMA_ADDRESS		0xffffffff
-#define MAX_DMA_CHANNELS	0
-
-#endif /* _ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-versatile/entry-macro.S b/include/asm-arm/arch-versatile/entry-macro.S
index 90e4e97..58f0d71 100644
--- a/include/asm-arm/arch-versatile/entry-macro.S
+++ b/include/asm-arm/arch-versatile/entry-macro.S
@@ -7,7 +7,9 @@
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-			.macro	disable_fiq
+#include <asm/hardware.h>
+
+		.macro	disable_fiq
 		.endm
 
 		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
diff --git a/include/asm-arm/byteorder.h b/include/asm-arm/byteorder.h
index d648a19..741f5bc 100644
--- a/include/asm-arm/byteorder.h
+++ b/include/asm-arm/byteorder.h
@@ -15,9 +15,23 @@
 #ifndef __ASM_ARM_BYTEORDER_H
 #define __ASM_ARM_BYTEORDER_H
 
-
+#include <linux/compiler.h>
 #include <asm/types.h>
 
+static inline __attribute_const__ __u32 ___arch__swab32(__u32 x)
+{
+	__u32 t;
+
+	t = x ^ ((x << 16) | (x >> 16));	/* eor r1,r0,r0,ror #16  */
+	x = (x << 24) | (x >> 8);		/* mov r0,r0,ror #8      */
+	t &= ~0x00FF0000;			/* bic r1,r1,#0x00FF0000 */
+	x ^= (t >> 8);				/* eor r0,r0,r1,lsr #8   */
+
+	return x;
+}
+
+#define __arch__swab32(x) ___arch__swab32(x)
+
 #if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
 #  define __BYTEORDER_HAS_U64__
 #  define __SWAB_64_THRU_32__
diff --git a/include/asm-arm/cacheflush.h b/include/asm-arm/cacheflush.h
index e81baff..09e19a7 100644
--- a/include/asm-arm/cacheflush.h
+++ b/include/asm-arm/cacheflush.h
@@ -14,7 +14,6 @@
 #include <linux/sched.h>
 #include <linux/mm.h>
 
-#include <asm/mman.h>
 #include <asm/glue.h>
 #include <asm/shmparam.h>
 
diff --git a/include/asm-arm/dma.h b/include/asm-arm/dma.h
index ef41df43a..49c01e2 100644
--- a/include/asm-arm/dma.h
+++ b/include/asm-arm/dma.h
@@ -10,6 +10,13 @@ typedef unsigned int dmach_t;
 #include <asm/arch/dma.h>
 
 /*
+ * This is the maximum virtual address which can be DMA'd from.
+ */
+#ifndef MAX_DMA_ADDRESS
+#define MAX_DMA_ADDRESS	0xffffffff
+#endif
+
+/*
  * DMA modes
  */
 typedef unsigned int dmamode_t;
@@ -91,7 +98,9 @@ extern void set_dma_sg(dmach_t channel, struct scatterlist *sg, int nr_sg);
  * especially since some DMA architectures don't update the
  * DMA address immediately, but defer it to the enable_dma().
  */
-extern void set_dma_addr(dmach_t channel, unsigned long physaddr);
+extern void __set_dma_addr(dmach_t channel, void *addr);
+#define set_dma_addr(channel, addr)				\
+	__set_dma_addr(channel, bus_to_virt(addr))
 
 /* Set the DMA byte count for this channel
  *
diff --git a/include/asm-arm/hardware/sharpsl_pm.h b/include/asm-arm/hardware/sharpsl_pm.h
new file mode 100644
index 0000000..36983e5
--- /dev/null
+++ b/include/asm-arm/hardware/sharpsl_pm.h
@@ -0,0 +1,94 @@
+/*
+ * SharpSL Battery/PM Driver
+ *
+ * Copyright (c) 2004-2005 Richard Purdie
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/interrupt.h>
+
+struct sharpsl_charger_machinfo {
+	void (*init)(void);
+	void (*exit)(void);
+	int gpio_acin;
+	int gpio_batfull;
+	int gpio_batlock;
+	int gpio_fatal;
+	void (*discharge)(int);
+	void (*discharge1)(int);
+	void (*charge)(int);
+	void (*measure_temp)(int);
+	void (*presuspend)(void);
+	void (*postsuspend)(void);
+	unsigned long (*read_devdata)(int);
+#define SHARPSL_BATT_VOLT       1
+#define SHARPSL_BATT_TEMP       2
+#define SHARPSL_ACIN_VOLT       3
+#define SHARPSL_STATUS_ACIN     4
+#define SHARPSL_STATUS_LOCK     5
+#define SHARPSL_STATUS_CHRGFULL 6
+#define SHARPSL_STATUS_FATAL    7
+	unsigned long (*charger_wakeup)(void);
+	int (*should_wakeup)(unsigned int resume_on_alarm);
+	int bat_levels;
+	struct battery_thresh *bat_levels_noac;
+	struct battery_thresh *bat_levels_acin;
+	int status_high_acin;
+	int status_low_acin;
+	int status_high_noac;
+	int status_low_noac;
+};
+
+struct battery_thresh {
+	int voltage;
+	int percentage;
+};
+
+struct battery_stat {
+	int ac_status;         /* APM AC Present/Not Present */
+	int mainbat_status;    /* APM Main Battery Status */
+	int mainbat_percent;   /* Main Battery Percentage Charge */
+	int mainbat_voltage;   /* Main Battery Voltage */
+};
+
+struct sharpsl_pm_status {
+	struct device *dev;
+	struct timer_list ac_timer;
+	struct timer_list chrg_full_timer;
+
+	int charge_mode;
+#define CHRG_ERROR    (-1)
+#define CHRG_OFF      (0)
+#define CHRG_ON       (1)
+#define CHRG_DONE     (2)
+
+	unsigned int flags;
+#define SHARPSL_SUSPENDED       (1 << 0)  /* Device is Suspended */
+#define SHARPSL_ALARM_ACTIVE    (1 << 1)  /* Alarm is for charging event (not user) */
+#define SHARPSL_BL_LIMIT        (1 << 2)  /* Backlight Intensity Limited */
+#define SHARPSL_APM_QUEUED      (1 << 3)  /* APM Event Queued */
+#define SHARPSL_DO_OFFLINE_CHRG (1 << 4)  /* Trigger the offline charger */
+
+	int full_count;
+	unsigned long charge_start_time;
+	struct sharpsl_charger_machinfo *machinfo;
+	struct battery_stat battstat;
+};
+
+extern struct sharpsl_pm_status sharpsl_pm;
+
+
+#define SHARPSL_LED_ERROR  2
+#define SHARPSL_LED_ON     1
+#define SHARPSL_LED_OFF    0
+
+void sharpsl_battery_kick(void);
+void sharpsl_pm_led(int val);
+irqreturn_t sharpsl_ac_isr(int irq, void *dev_id, struct pt_regs *fp);
+irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id, struct pt_regs *fp);
+irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id, struct pt_regs *fp);
+
diff --git a/include/asm-arm/mach/dma.h b/include/asm-arm/mach/dma.h
index 31bf716..e7c4a20 100644
--- a/include/asm-arm/mach/dma.h
+++ b/include/asm-arm/mach/dma.h
@@ -25,13 +25,15 @@ struct dma_ops {
 };
 
 struct dma_struct {
+	void		*addr;		/* single DMA address		*/
+	unsigned long	count;		/* single DMA size		*/
 	struct scatterlist buf;		/* single DMA			*/
 	int		sgcount;	/* number of DMA SG		*/
 	struct scatterlist *sg;		/* DMA Scatter-Gather List	*/
 
 	unsigned int	active:1;	/* Transfer active		*/
 	unsigned int	invalid:1;	/* Address/Count changed	*/
-	unsigned int	using_sg:1;	/* using scatter list?		*/
+
 	dmamode_t	dma_mode;	/* DMA mode			*/
 	int		speed;		/* DMA speed			*/
 
diff --git a/include/asm-arm/scatterlist.h b/include/asm-arm/scatterlist.h
index 83b876f..de2f65e 100644
--- a/include/asm-arm/scatterlist.h
+++ b/include/asm-arm/scatterlist.h
@@ -9,7 +9,6 @@ struct scatterlist {
 	unsigned int	offset;		/* buffer offset		 */
 	dma_addr_t	dma_address;	/* dma address			 */
 	unsigned int	length;		/* length			 */
-	char		*__address;	/* for set_dma_addr		 */
 };
 
 /*
diff --git a/include/asm-arm/hardware/amba.h b/include/linux/amba/bus.h
index 51e6e54..51e6e54 100644
--- a/include/asm-arm/hardware/amba.h
+++ b/include/linux/amba/bus.h
diff --git a/include/asm-arm/hardware/amba_clcd.h b/include/linux/amba/clcd.h
index 6b8d73d..6b8d73d 100644
--- a/include/asm-arm/hardware/amba_clcd.h
+++ b/include/linux/amba/clcd.h
diff --git a/include/asm-arm/hardware/amba_kmi.h b/include/linux/amba/kmi.h
index a39e5be..a39e5be 100644
--- a/include/asm-arm/hardware/amba_kmi.h
+++ b/include/linux/amba/kmi.h
diff --git a/include/asm-arm/hardware/amba_serial.h b/include/linux/amba/serial.h
index dc726ff..dc726ff 100644
--- a/include/asm-arm/hardware/amba_serial.h
+++ b/include/linux/amba/serial.h
diff --git a/include/asm-arm/hardware/clock.h b/include/linux/clk.h
index 19da861..12848f8 100644
--- a/include/asm-arm/hardware/clock.h
+++ b/include/linux/clk.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/hardware/clock.h
+ *  linux/include/linux/clk.h
  *
  *  Copyright (C) 2004 ARM Limited.
  *  Written by Deep Blue Solutions Limited.
@@ -33,6 +33,8 @@ struct clk;
  * uses @dev and @id to determine the clock consumer, and thereby
  * the clock producer.  (IOW, @id may be identical strings, but
  * clk_get may return different clock producers depending on @dev.)
+ *
+ * Drivers must assume that the clock source is not enabled.
  */
 struct clk *clk_get(struct device *dev, const char *id);
 
@@ -49,22 +51,16 @@ int clk_enable(struct clk *clk);
 /**
  * clk_disable - inform the system when the clock source is no longer required.
  * @clk: clock source
- */
-void clk_disable(struct clk *clk);
-
-/**
- * clk_use - increment the use count
- * @clk: clock source
  *
- * Returns success (0) or negative errno.
- */
-int clk_use(struct clk *clk);
-
-/**
- * clk_unuse - decrement the use count
- * @clk: clock source
+ * Inform the system that a clock source is no longer required by
+ * a driver and may be shut down.
+ *
+ * Implementation detail: if the clock source is shared between
+ * multiple drivers, clk_enable() calls must be balanced by the
+ * same number of clk_disable() calls for the clock source to be
+ * disabled.
  */
-void clk_unuse(struct clk *clk);
+void clk_disable(struct clk *clk);
 
 /**
  * clk_get_rate - obtain the current clock rate (in Hz) for a clock source.
@@ -76,6 +72,10 @@ unsigned long clk_get_rate(struct clk *clk);
 /**
  * clk_put	- "free" the clock source
  * @clk: clock source
+ *
+ * Note: drivers must ensure that all clk_enable calls made on this
+ * clock source are balanced by clk_disable calls prior to calling
+ * this function.
  */
 void clk_put(struct clk *clk);
 
diff --git a/sound/arm/aaci.c b/sound/arm/aaci.c
index 5e9a81a..54147c1 100644
--- a/sound/arm/aaci.c
+++ b/sound/arm/aaci.c
@@ -17,11 +17,11 @@
 #include <linux/spinlock.h>
 #include <linux/interrupt.h>
 #include <linux/err.h>
+#include <linux/amba/bus.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
-#include <asm/hardware/amba.h>
 
 #include <sound/driver.h>
 #include <sound/core.h>