diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /Documentation/tipar.txt | |
download | kernel_samsung_espresso10-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip kernel_samsung_espresso10-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz kernel_samsung_espresso10-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.bz2 |
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'Documentation/tipar.txt')
-rw-r--r-- | Documentation/tipar.txt | 93 |
1 files changed, 93 insertions, 0 deletions
diff --git a/Documentation/tipar.txt b/Documentation/tipar.txt new file mode 100644 index 0000000..67133ba --- /dev/null +++ b/Documentation/tipar.txt @@ -0,0 +1,93 @@ + + Parallel link cable for Texas Instruments handhelds + =================================================== + + +Author: Romain Lievin +Homepage: http://lpg.ticalc.org/prj_tidev/index.html + + +INTRODUCTION: + +This is a driver for the very common home-made parallel link cable, a cable +designed for connecting TI8x/9x graphing calculators (handhelds) to a computer +or workstation (Alpha, Sparc). Given that driver is built on parport, the +parallel port abstraction layer, this driver is architecture-independent. + +It can also be used with another device plugged on the same port (such as a +ZIP drive). I have a 100MB ZIP and both of them work fine! + +If you need more information, please visit the 'TI drivers' homepage at the URL +above. + +WHAT YOU NEED: + +A TI calculator and a program capable of communicating with your calculator. + +TiLP will work for sure (since I am its developer!). yal92 may be able to use +it by changing tidev for tipar (may require some hacking...). + +HOW TO USE IT: + +You must have first compiled parport support (CONFIG_PARPORT_DEV): either +compiled in your kernel, either as a module. + +Next, (as root): + + modprobe parport + modprobe tipar + +If it is not already there (it usually is), create the device: + + mknod /dev/tipar0 c 115 0 + mknod /dev/tipar1 c 115 1 + mknod /dev/tipar2 c 115 2 + +You will have to set permissions on this device to allow you to read/write +from it: + + chmod 666 /dev/tipar[0..2] + +Now you are ready to run a linking program such as TiLP. Be sure to configure +it properly (RTFM). + +MODULE PARAMETERS: + + You can set these with: modprobe tipar NAME=VALUE + There is currently no way to set these on a per-cable basis. + + NAME: timeout + TYPE: integer + DEFAULT: 15 + DESC: Timeout value in tenth of seconds. If no data is available once this + time has expired then the driver will return with a timeout error. + + NAME: delay + TYPE: integer + DEFAULT: 10 + DESC: Inter-bit delay in micro-seconds. A lower value gives an higher data + rate but makes transmission less reliable. + +These parameters can be changed at run time by any program via ioctl(2) calls +as listed in ./include/linux/ticable.h. + +Rather than write 50 pages describing the ioctl() and so on, it is +perhaps more useful you look at ticables library (dev_link.c) that demonstrates +how to use them, and demonstrates the features of the driver. This is +probably a lot more useful to people interested in writing applications +that will be using this driver. + +QUIRKS/BUGS: + +None. + +HOW TO CONTACT US: + +You can email me at roms@lpg.ticalc.org. Please prefix the subject line +with "TIPAR: " so that I am certain to notice your message. +You can also mail JB at jb@jblache.org. He packaged these drivers for Debian. + +CREDITS: + +The code is based on tidev.c & parport.c. +The driver has been developed independently of Texas Instruments. |