Merge branch 'master' into upstream

23 files changed, 786 insertions, 221 deletions

diff --git a/Documentation/CodingStyle b/Documentation/CodingStyle
index 6d2412e..29c1896 100644
--- a/Documentation/CodingStyle
+++ b/Documentation/CodingStyle
@@ -532,6 +532,40 @@ appears outweighs the potential value of the hint that tells gcc to do
 something it would have done anyway.
 
 
+		Chapter 16: Function return values and names
+
+Functions can return values of many different kinds, and one of the
+most common is a value indicating whether the function succeeded or
+failed.  Such a value can be represented as an error-code integer
+(-Exxx = failure, 0 = success) or a "succeeded" boolean (0 = failure,
+non-zero = success).
+
+Mixing up these two sorts of representations is a fertile source of
+difficult-to-find bugs.  If the C language included a strong distinction
+between integers and booleans then the compiler would find these mistakes
+for us... but it doesn't.  To help prevent such bugs, always follow this
+convention:
+
+	If the name of a function is an action or an imperative command,
+	the function should return an error-code integer.  If the name
+	is a predicate, the function should return a "succeeded" boolean.
+
+For example, "add work" is a command, and the add_work() function returns 0
+for success or -EBUSY for failure.  In the same way, "PCI device present" is
+a predicate, and the pci_dev_present() function returns 1 if it succeeds in
+finding a matching device or 0 if it doesn't.
+
+All EXPORTed functions must respect this convention, and so should all
+public functions.  Private (static) functions need not, but it is
+recommended that they do.
+
+Functions whose return value is the actual result of a computation, rather
+than an indication of whether the computation succeeded, are not subject to
+this rule.  Generally they indicate failure by returning some out-of-range
+result.  Typical examples would be functions that return pointers; they use
+NULL or the ERR_PTR mechanism to report failure.
+
+
 
 		Appendix I: References
 
diff --git a/Documentation/DocBook/kernel-api.tmpl b/Documentation/DocBook/kernel-api.tmpl
index f8fe882..6d4b1ef 100644
--- a/Documentation/DocBook/kernel-api.tmpl
+++ b/Documentation/DocBook/kernel-api.tmpl
@@ -181,27 +181,6 @@ X!Ilib/string.c
      </sect1>
   </chapter>
 
-  <chapter id="proc">
-     <title>The proc filesystem</title>
- 
-     <sect1><title>sysctl interface</title>
-!Ekernel/sysctl.c
-     </sect1>
-
-     <sect1><title>proc filesystem interface</title>
-!Ifs/proc/base.c
-     </sect1>
-  </chapter>
-
-  <chapter id="debugfs">
-     <title>The debugfs filesystem</title>
- 
-     <sect1><title>debugfs interface</title>
-!Efs/debugfs/inode.c
-!Efs/debugfs/file.c
-     </sect1>
-  </chapter>
-
   <chapter id="vfs">
      <title>The Linux VFS</title>
      <sect1><title>The Filesystem types</title>
@@ -234,6 +213,50 @@ X!Ilib/string.c
      </sect1>
   </chapter>
 
+  <chapter id="proc">
+     <title>The proc filesystem</title>
+ 
+     <sect1><title>sysctl interface</title>
+!Ekernel/sysctl.c
+     </sect1>
+
+     <sect1><title>proc filesystem interface</title>
+!Ifs/proc/base.c
+     </sect1>
+  </chapter>
+
+  <chapter id="sysfs">
+     <title>The Filesystem for Exporting Kernel Objects</title>
+!Efs/sysfs/file.c
+!Efs/sysfs/symlink.c
+!Efs/sysfs/bin.c
+  </chapter>
+
+  <chapter id="debugfs">
+     <title>The debugfs filesystem</title>
+ 
+     <sect1><title>debugfs interface</title>
+!Efs/debugfs/inode.c
+!Efs/debugfs/file.c
+     </sect1>
+  </chapter>
+
+  <chapter id="relayfs">
+     <title>relay interface support</title>
+
+     <para>
+	Relay interface support
+	is designed to provide an efficient mechanism for tools and
+	facilities to relay large amounts of data from kernel space to
+	user space.
+     </para>
+
+     <sect1><title>relay interface</title>
+!Ekernel/relay.c
+!Ikernel/relay.c
+     </sect1>
+  </chapter>
+
   <chapter id="netcore">
      <title>Linux Networking</title>
      <sect1><title>Networking Base Types</title>
@@ -349,13 +372,6 @@ X!Earch/i386/kernel/mca.c
      </sect1>
   </chapter>
 
-  <chapter id="sysfs">
-     <title>The Filesystem for Exporting Kernel Objects</title>
-!Efs/sysfs/file.c
-!Efs/sysfs/symlink.c
-!Efs/sysfs/bin.c
-  </chapter>
-
   <chapter id="security">
      <title>Security Framework</title>
 !Esecurity/security.c
@@ -386,6 +402,7 @@ X!Iinclude/linux/device.h
 -->
 !Edrivers/base/driver.c
 !Edrivers/base/core.c
+!Edrivers/base/class.c
 !Edrivers/base/firmware_class.c
 !Edrivers/base/transport_class.c
 !Edrivers/base/dmapool.c
@@ -437,6 +454,11 @@ X!Edrivers/pnp/system.c
 !Eblock/ll_rw_blk.c
   </chapter>
 
+  <chapter id="chrdev">
+	<title>Char devices</title>
+!Efs/char_dev.c
+  </chapter>
+
   <chapter id="miscdev">
      <title>Miscellaneous Devices</title>
 !Edrivers/char/misc.c
diff --git a/Documentation/SubmitChecklist b/Documentation/SubmitChecklist
index a10bfb6..a6cb6ff 100644
--- a/Documentation/SubmitChecklist
+++ b/Documentation/SubmitChecklist
@@ -61,3 +61,6 @@ kernel patches.
     Documentation/kernel-parameters.txt.
 
 18: All new module parameters are documented with MODULE_PARM_DESC()
+
+19: All new userspace interfaces are documented in Documentation/ABI/.
+    See Documentation/ABI/README for more information.
diff --git a/Documentation/SubmittingDrivers b/Documentation/SubmittingDrivers
index 6bd30fd..58bead0 100644
--- a/Documentation/SubmittingDrivers
+++ b/Documentation/SubmittingDrivers
@@ -59,11 +59,11 @@ Copyright:	The copyright owner must agree to use of GPL.
 		are the same person/entity. If not, the name of
 		the person/entity authorizing use of GPL should be
 		listed in case it's necessary to verify the will of
-		the copright owner.
+		the copyright owner.
 
 Interfaces:	If your driver uses existing interfaces and behaves like
 		other drivers in the same class it will be much more likely
-		to be accepted than if it invents gratuitous new ones. 
+		to be accepted than if it invents gratuitous new ones.
 		If you need to implement a common API over Linux and NT
 		drivers do it in userspace.
 
@@ -88,7 +88,7 @@ Clarity:	It helps if anyone can see how to fix the driver. It helps
 		it will go in the bitbucket.
 
 Control:	In general if there is active maintainance of a driver by
-		the author then patches will be redirected to them unless 
+		the author then patches will be redirected to them unless
 		they are totally obvious and without need of checking.
 		If you want to be the contact and update point for the
 		driver it is a good idea to state this in the comments,
@@ -100,7 +100,7 @@ What Criteria Do Not Determine Acceptance
 Vendor:		Being the hardware vendor and maintaining the driver is
 		often a good thing. If there is a stable working driver from
 		other people already in the tree don't expect 'we are the
-		vendor' to get your driver chosen. Ideally work with the 
+		vendor' to get your driver chosen. Ideally work with the
 		existing driver author to build a single perfect driver.
 
 Author:		It doesn't matter if a large Linux company wrote the driver,
@@ -116,17 +116,13 @@ Linux kernel master tree:
 	ftp.??.kernel.org:/pub/linux/kernel/...
 	?? == your country code, such as "us", "uk", "fr", etc.
 
-Linux kernel mailing list:		
+Linux kernel mailing list:
 	linux-kernel@vger.kernel.org
 	[mail majordomo@vger.kernel.org to subscribe]
 
 Linux Device Drivers, Third Edition (covers 2.6.10):
 	http://lwn.net/Kernel/LDD3/  (free version)
 
-Kernel traffic:
-	Weekly summary of kernel list activity (much easier to read)
-	http://www.kerneltraffic.org/kernel-traffic/
-
 LWN.net:
 	Weekly summary of kernel development activity - http://lwn.net/
 	2.6 API changes:
@@ -145,11 +141,8 @@ KernelNewbies:
 Linux USB project:
 	http://www.linux-usb.org/
 
-How to NOT write kernel driver by arjanv@redhat.com
-	http://people.redhat.com/arjanv/olspaper.pdf
+How to NOT write kernel driver by Arjan van de Ven:
+	http://www.fenrus.org/how-to-not-write-a-device-driver-paper.pdf
 
 Kernel Janitor:
 	http://janitor.kernelnewbies.org/
-
---
-Last updated on 17 Nov 2005.
diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches
index d42ab4c..302d148 100644
--- a/Documentation/SubmittingPatches
+++ b/Documentation/SubmittingPatches
@@ -173,15 +173,15 @@ For small patches you may want to CC the Trivial Patch Monkey
 trivial@kernel.org managed by Adrian Bunk; which collects "trivial"
 patches. Trivial patches must qualify for one of the following rules:
  Spelling fixes in documentation
- Spelling fixes which could break grep(1).
+ Spelling fixes which could break grep(1)
  Warning fixes (cluttering with useless warnings is bad)
  Compilation fixes (only if they are actually correct)
  Runtime fixes (only if they actually fix things)
- Removing use of deprecated functions/macros (eg. check_region).
+ Removing use of deprecated functions/macros (eg. check_region)
  Contact detail and documentation fixes
  Non-portable code replaced by portable code (even in arch-specific,
  since people copy, as long as it's trivial)
- Any fix by the author/maintainer of the file. (ie. patch monkey
+ Any fix by the author/maintainer of the file (ie. patch monkey
  in re-transmission mode)
 URL: <http://www.kernel.org/pub/linux/kernel/people/bunk/trivial/>
 
@@ -209,6 +209,19 @@ Exception:  If your mailer is mangling patches then someone may ask
 you to re-send them using MIME.
 
 
+WARNING: Some mailers like Mozilla send your messages with
+---- message header ----
+Content-Type: text/plain; charset=us-ascii; format=flowed
+---- message header ----
+The problem is that "format=flowed" makes some of the mailers
+on receiving side to replace TABs with spaces and do similar
+changes. Thus the patches from you can look corrupted.
+
+To fix this just make your mozilla defaults/pref/mailnews.js file to look like:
+pref("mailnews.send_plaintext_flowed", false); // RFC 2646=======
+pref("mailnews.display.disable_format_flowed_support", true);
+
+
 
 7) E-mail size.
 
@@ -245,13 +258,13 @@ updated change.
 It is quite common for Linus to "drop" your patch without comment.
 That's the nature of the system.  If he drops your patch, it could be
 due to
-* Your patch did not apply cleanly to the latest kernel version
+* Your patch did not apply cleanly to the latest kernel version.
 * Your patch was not sufficiently discussed on linux-kernel.
-* A style issue (see section 2),
-* An e-mail formatting issue (re-read this section)
-* A technical problem with your change
-* He gets tons of e-mail, and yours got lost in the shuffle
-* You are being annoying (See Figure 1)
+* A style issue (see section 2).
+* An e-mail formatting issue (re-read this section).
+* A technical problem with your change.
+* He gets tons of e-mail, and yours got lost in the shuffle.
+* You are being annoying.
 
 When in doubt, solicit comments on linux-kernel mailing list.
 
@@ -476,10 +489,10 @@ SECTION 3 - REFERENCES
 Andrew Morton, "The perfect patch" (tpp).
   <http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt>
 
-Jeff Garzik, "Linux kernel patch submission format."
+Jeff Garzik, "Linux kernel patch submission format".
   <http://linux.yyz.us/patch-format.html>
 
-Greg Kroah-Hartman "How to piss off a kernel subsystem maintainer".
+Greg Kroah-Hartman, "How to piss off a kernel subsystem maintainer".
   <http://www.kroah.com/log/2005/03/31/>
   <http://www.kroah.com/log/2005/07/08/>
   <http://www.kroah.com/log/2005/10/19/>
@@ -488,9 +501,9 @@ Greg Kroah-Hartman "How to piss off a kernel subsystem maintainer".
 NO!!!! No more huge patch bombs to linux-kernel@vger.kernel.org people!
   <http://marc.theaimsgroup.com/?l=linux-kernel&m=112112749912944&w=2>
 
-Kernel Documentation/CodingStyle
+Kernel Documentation/CodingStyle:
   <http://sosdg.org/~coywolf/lxr/source/Documentation/CodingStyle>
 
-Linus Torvald's mail on the canonical patch format:
+Linus Torvalds's mail on the canonical patch format:
   <http://lkml.org/lkml/2005/4/7/183>
 --
diff --git a/Documentation/cpusets.txt b/Documentation/cpusets.txt
index 76b4429..842f0d1 100644
--- a/Documentation/cpusets.txt
+++ b/Documentation/cpusets.txt
@@ -217,11 +217,11 @@ exclusive cpuset.  Also, the use of a Linux virtual file system (vfs)
 to represent the cpuset hierarchy provides for a familiar permission
 and name space for cpusets, with a minimum of additional kernel code.
 
-The cpus file in the root (top_cpuset) cpuset is read-only.
-It automatically tracks the value of cpu_online_map, using a CPU
-hotplug notifier.  If and when memory nodes can be hotplugged,
-we expect to make the mems file in the root cpuset read-only
-as well, and have it track the value of node_online_map.
+The cpus and mems files in the root (top_cpuset) cpuset are
+read-only.  The cpus file automatically tracks the value of
+cpu_online_map using a CPU hotplug notifier, and the mems file
+automatically tracks the value of node_online_map using the
+cpuset_track_online_nodes() hook.
 
 
 1.4 What are exclusive cpusets ?
diff --git a/Documentation/fb/intelfb.txt b/Documentation/fb/intelfb.txt
index c12d39a..aa0d322 100644
--- a/Documentation/fb/intelfb.txt
+++ b/Documentation/fb/intelfb.txt
@@ -1,16 +1,19 @@
-Intel 830M/845G/852GM/855GM/865G/915G Framebuffer driver
+Intel 830M/845G/852GM/855GM/865G/915G/945G Framebuffer driver
 ================================================================
 
 A. Introduction
-	This is a framebuffer driver for various Intel 810/815 compatible
+	This is a framebuffer driver for various Intel 8xx/9xx compatible
 graphics devices.  These would include:
 
 	Intel 830M
-	Intel 810E845G
+	Intel 845G
 	Intel 852GM
 	Intel 855GM
 	Intel 865G
 	Intel 915G
+	Intel 915GM
+	Intel 945G
+	Intel 945GM
 
 B.  List of available options
 
@@ -78,7 +81,7 @@ C. Kernel booting
 Separate each option/option-pair by commas (,) and the option from its value
 with an equals sign (=) as in the following:
 
-video=i810fb:option1,option2=value2
+video=intelfb:option1,option2=value2
 
 Sample Usage
 ------------
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 436697c..9364f47 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -46,17 +46,8 @@ Who:	Jody McIntyre <scjody@modernduck.com>
 
 ---------------------------
 
-What:	sbp2: module parameter "force_inquiry_hack"
-When:	July 2006
-Why:	Superceded by parameter "workarounds". Both parameters are meant to be
-	used ad-hoc and for single devices only, i.e. not in modprobe.conf,
-	therefore the impact of this feature replacement should be low.
-Who:	Stefan Richter <stefanr@s5r6.in-berlin.de>
-
----------------------------
-
 What:	Video4Linux API 1 ioctls and video_decoder.h from Video devices.
-When:	July 2006
+When:	December 2006
 Why:	V4L1 AP1 was replaced by V4L2 API. during migration from 2.4 to 2.6
 	series. The old API have lots of drawbacks and don't provide enough
 	means to work with all video and audio standards. The newer API is
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index 7db71d6..7240ee7 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -39,6 +39,8 @@ Table of Contents
   2.9	Appletalk
   2.10	IPX
   2.11	/proc/sys/fs/mqueue - POSIX message queues filesystem
+  2.12	/proc/<pid>/oom_adj - Adjust the oom-killer score
+  2.13	/proc/<pid>/oom_score - Display current oom-killer score
 
 ------------------------------------------------------------------------------
 Preface
@@ -1962,6 +1964,22 @@ a queue must be less or equal then msg_max.
 maximum  message size value (it is every  message queue's attribute set during
 its creation).
 
+2.12 /proc/<pid>/oom_adj - Adjust the oom-killer score
+------------------------------------------------------
+
+This file can be used to adjust the score used to select which processes
+should be killed in an  out-of-memory  situation.  Giving it a high score will
+increase the likelihood of this process being killed by the oom-killer.  Valid
+values are in the range -16 to +15, plus the special value -17, which disables
+oom-killing altogether for this process.
+
+2.13 /proc/<pid>/oom_score - Display current oom-killer score
+-------------------------------------------------------------
+
+------------------------------------------------------------------------------
+This file can be used to check the current score used by the oom-killer is for
+any given <pid>. Use it together with /proc/<pid>/oom_adj to tune which
+process should be killed in an out-of-memory situation.
 
 ------------------------------------------------------------------------------
 Summary
diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87
index 9555be1..e783fd6 100644
--- a/Documentation/hwmon/it87
+++ b/Documentation/hwmon/it87
@@ -13,12 +13,25 @@ Supported chips:
                        from Super I/O config space (8 I/O ports)
     Datasheet: Publicly available at the ITE website
                http://www.ite.com.tw/
+  * IT8716F
+    Prefix: 'it8716'
+    Addresses scanned: from Super I/O config space (8 I/O ports)
+    Datasheet: Publicly available at the ITE website
+               http://www.ite.com.tw/product_info/file/pc/IT8716F_V0.3.ZIP
+  * IT8718F
+    Prefix: 'it8718'
+    Addresses scanned: from Super I/O config space (8 I/O ports)
+    Datasheet: Publicly available at the ITE website
+               http://www.ite.com.tw/product_info/file/pc/IT8718F_V0.2.zip
+               http://www.ite.com.tw/product_info/file/pc/IT8718F_V0%203_(for%20C%20version).zip
   * SiS950   [clone of IT8705F]
     Prefix: 'it87'
     Addresses scanned: from Super I/O config space (8 I/O ports)
     Datasheet: No longer be available
 
-Author: Christophe Gauthron <chrisg@0-in.com>
+Authors:
+    Christophe Gauthron <chrisg@0-in.com>
+    Jean Delvare <khali@linux-fr.org>
 
 
 Module Parameters
@@ -43,26 +56,46 @@ Module Parameters
 Description
 -----------
 
-This driver implements support for the IT8705F, IT8712F and SiS950 chips.
-
-This driver also supports IT8712F, which adds SMBus access, and a VID
-input, used to report the Vcore voltage of the Pentium processor.
-The IT8712F additionally features VID inputs.
+This driver implements support for the IT8705F, IT8712F, IT8716F,
+IT8718F and SiS950 chips.
 
 These chips are 'Super I/O chips', supporting floppy disks, infrared ports,
 joysticks and other miscellaneous stuff. For hardware monitoring, they
 include an 'environment controller' with 3 temperature sensors, 3 fan
 rotation speed sensors, 8 voltage sensors, and associated alarms.
 
+The IT8712F and IT8716F additionally feature VID inputs, used to report
+the Vcore voltage of the processor. The early IT8712F have 5 VID pins,
+the IT8716F and late IT8712F have 6. They are shared with other functions
+though, so the functionality may not be available on a given system.
+The driver dumbly assume it is there.
+
+The IT8718F also features VID inputs (up to 8 pins) but the value is
+stored in the Super-I/O configuration space. Due to technical limitations,
+this value can currently only be read once at initialization time, so
+the driver won't notice and report changes in the VID value. The two
+upper VID bits share their pins with voltage inputs (in5 and in6) so you
+can't have both on a given board.
+
+The IT8716F, IT8718F and later IT8712F revisions have support for
+2 additional fans. They are not yet supported by the driver.
+
+The IT8716F and IT8718F, and late IT8712F and IT8705F also have optional
+16-bit tachometer counters for fans 1 to 3. This is better (no more fan
+clock divider mess) but not compatible with the older chips and
+revisions. For now, the driver only uses the 16-bit mode on the
+IT8716F and IT8718F.
+
 Temperatures are measured in degrees Celsius. An alarm is triggered once
 when the Overtemperature Shutdown limit is crossed.
 
 Fan rotation speeds are reported in RPM (rotations per minute). An alarm is
-triggered if the rotation speed has dropped below a programmable limit. Fan
-readings can be divided by a programmable divider (1, 2, 4 or 8) to give the
-readings more range or accuracy. Not all RPM values can accurately be
-represented, so some rounding is done. With a divider of 2, the lowest
-representable value is around 2600 RPM.
+triggered if the rotation speed has dropped below a programmable limit. When
+16-bit tachometer counters aren't used, fan readings can be divided by
+a programmable divider (1, 2, 4 or 8) to give the readings more range or
+accuracy. With a divider of 2, the lowest representable value is around
+2600 RPM. Not all RPM values can accurately be represented, so some rounding
+is done.
 
 Voltage sensors (also known as IN sensors) report their values in volts. An
 alarm is triggered if the voltage has crossed a programmable minimum or
@@ -71,9 +104,9 @@ zero'; this is important for negative voltage measurements. All voltage
 inputs can measure voltages between 0 and 4.08 volts, with a resolution of
 0.016 volt. The battery voltage in8 does not have limit registers.
 
-The VID lines (IT8712F only) encode the core voltage value: the voltage
-level your processor should work with. This is hardcoded by the mainboard
-and/or processor itself. It is a value in volts.
+The VID lines (IT8712F/IT8716F/IT8718F) encode the core voltage value:
+the voltage level your processor should work with. This is hardcoded by
+the mainboard and/or processor itself. It is a value in volts.
 
 If an alarm triggers, it will remain triggered until the hardware register
 is read at least once. This means that the cause for the alarm may already
diff --git a/Documentation/hwmon/k8temp b/Documentation/hwmon/k8temp
new file mode 100644
index 0000000..bab445a
--- /dev/null
+++ b/Documentation/hwmon/k8temp
@@ -0,0 +1,52 @@
+Kernel driver k8temp
+====================
+
+Supported chips:
+  * AMD K8 CPU
+    Prefix: 'k8temp'
+    Addresses scanned: PCI space
+    Datasheet: http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/32559.pdf
+
+Author: Rudolf Marek
+Contact: Rudolf Marek <r.marek@sh.cvut.cz>
+
+Description
+-----------
+
+This driver permits reading temperature sensor(s) embedded inside AMD K8 CPUs.
+Official documentation says that it works from revision F of K8 core, but
+in fact it seems to be implemented for all revisions of K8 except the first
+two revisions (SH-B0 and SH-B3).
+
+There can be up to four temperature sensors inside single CPU. The driver
+will auto-detect the sensors and will display only temperatures from
+implemented sensors.
+
+Mapping of /sys files is as follows:
+
+temp1_input - temperature of Core 0 and "place" 0
+temp2_input - temperature of Core 0 and "place" 1
+temp3_input - temperature of Core 1 and "place" 0
+temp4_input - temperature of Core 1 and "place" 1
+
+Temperatures are measured in degrees Celsius and measurement resolution is
+1 degree C. It is expected that future CPU will have better resolution. The
+temperature is updated once a second. Valid temperatures are from -49 to
+206 degrees C.
+
+Temperature known as TCaseMax was specified for processors up to revision E.
+This temperature is defined as temperature between heat-spreader and CPU
+case, so the internal CPU temperature supplied by this driver can be higher.
+There is no easy way how to measure the temperature which will correlate
+with TCaseMax temperature.
+
+For newer revisions of CPU (rev F, socket AM2) there is a mathematically
+computed temperature called TControl, which must be lower than TControlMax.
+
+The relationship is following:
+
+temp1_input - TjOffset*2 < TControlMax,
+
+TjOffset is not yet exported by the driver, TControlMax is usually
+70 degrees C. The rule of the thumb -> CPU temperature should not cross
+60 degrees C too much.
diff --git a/Documentation/hwmon/vt1211 b/Documentation/hwmon/vt1211
new file mode 100644
index 0000000..77fa633
--- /dev/null
+++ b/Documentation/hwmon/vt1211
@@ -0,0 +1,206 @@
+Kernel driver vt1211
+====================
+
+Supported chips:
+  * VIA VT1211
+    Prefix: 'vt1211'
+    Addresses scanned: none, address read from Super-I/O config space
+    Datasheet: Provided by VIA upon request and under NDA
+
+Authors: Juerg Haefliger <juergh@gmail.com>
+
+This driver is based on the driver for kernel 2.4 by Mark D. Studebaker and
+its port to kernel 2.6 by Lars Ekman.
+
+Thanks to Joseph Chan and Fiona Gatt from VIA for providing documentation and
+technical support.
+
+
+Module Parameters
+-----------------
+
+* uch_config: int	Override the BIOS default universal channel (UCH)
+			configuration for channels 1-5.
+			Legal values are in the range of 0-31. Bit 0 maps to
+			UCH1, bit 1 maps to UCH2 and so on. Setting a bit to 1
+			enables the thermal input of that particular UCH and
+			setting a bit to 0 enables the voltage input.
+
+* int_mode: int		Override the BIOS default temperature interrupt mode.
+			The only possible value is 0 which forces interrupt
+			mode 0. In this mode, any pending interrupt is cleared
+			when the status register is read but is regenerated as
+			long as the temperature stays above the hysteresis
+			limit.
+
+Be aware that overriding BIOS defaults might cause some unwanted side effects!
+
+
+Description
+-----------
+
+The VIA VT1211 Super-I/O chip includes complete hardware monitoring
+capabilities. It monitors 2 dedicated temperature sensor inputs (temp1 and
+temp2), 1 dedicated voltage (in5) and 2 fans. Additionally, the chip
+implements 5 universal input channels (UCH1-5) that can be individually
+programmed to either monitor a voltage or a temperature.
+
+This chip also provides manual and automatic control of fan speeds (according
+to the datasheet). The driver only supports automatic control since the manual
+mode doesn't seem to work as advertised in the datasheet. In fact I couldn't
+get manual mode to work at all! Be aware that automatic mode hasn't been
+tested very well (due to the fact that my EPIA M10000 doesn't have the fans
+connected to the PWM outputs of the VT1211 :-().
+
+The following table shows the relationship between the vt1211 inputs and the
+sysfs nodes.
+
+Sensor          Voltage Mode   Temp Mode   Default Use (from the datasheet)
+------          ------------   ---------   --------------------------------
+Reading 1                      temp1       Intel thermal diode
+Reading 3                      temp2       Internal thermal diode
+UCH1/Reading2   in0            temp3       NTC type thermistor
+UCH2            in1            temp4       +2.5V
+UCH3            in2            temp5       VccP (processor core)
+UCH4            in3            temp6       +5V
+UCH5            in4            temp7       +12V
++3.3V           in5                        Internal VCC (+3.3V)
+
+
+Voltage Monitoring
+------------------
+
+Voltages are sampled by an 8-bit ADC with a LSB of ~10mV. The supported input
+range is thus from 0 to 2.60V. Voltage values outside of this range need
+external scaling resistors. This external scaling needs to be compensated for
+via compute lines in sensors.conf, like:
+
+compute inx @*(1+R1/R2), @/(1+R1/R2)
+
+The board level scaling resistors according to VIA's recommendation are as
+follows. And this is of course totally dependent on the actual board
+implementation :-) You will have to find documentation for your own
+motherboard and edit sensors.conf accordingly.
+
+                                      Expected
+Voltage       R1     R2     Divider   Raw Value
+-----------------------------------------------
++2.5V         2K     10K    1.2       2083 mV
+VccP          ---    ---    1.0       1400 mV (1)
++5V           14K    10K    2.4       2083 mV
++12V          47K    10K    5.7       2105 mV
++3.3V (int)   2K     3.4K   1.588     3300 mV (2)
++3.3V (ext)   6.8K   10K    1.68      1964 mV
+
+(1) Depending on the CPU (1.4V is for a VIA C3 Nehemiah).
+(2) R1 and R2 for 3.3V (int) are internal to the VT1211 chip and the driver
+    performs the scaling and returns the properly scaled voltage value.
+
+Each measured voltage has an associated low and high limit which triggers an
+alarm when crossed.
+
+
+Temperature Monitoring
+----------------------
+
+Temperatures are reported in millidegree Celsius. Each measured temperature
+has a high limit which triggers an alarm if crossed. There is an associated
+hysteresis value with each temperature below which the temperature has to drop
+before the alarm is cleared (this is only true for interrupt mode 0). The
+interrupt mode can be forced to 0 in case the BIOS doesn't do it
+automatically. See the 'Module Parameters' section for details.
+
+All temperature channels except temp2 are external. Temp2 is the VT1211
+internal thermal diode and the driver does all the scaling for temp2 and
+returns the temperature in millidegree Celsius. For the external channels
+temp1 and temp3-temp7, scaling depends on the board implementation and needs
+to be performed in userspace via sensors.conf.
+
+Temp1 is an Intel-type thermal diode which requires the following formula to
+convert between sysfs readings and real temperatures:
+
+compute temp1 (@-Offset)/Gain, (@*Gain)+Offset
+
+According to the VIA VT1211 BIOS porting guide, the following gain and offset
+values should be used:
+
+Diode Type      Offset   Gain
+----------      ------   ----
+Intel CPU       88.638   0.9528
+                65.000   0.9686   *)
+VIA C3 Ezra     83.869   0.9528
+VIA C3 Ezra-T   73.869   0.9528
+
+*) This is the formula from the lm_sensors 2.10.0 sensors.conf file. I don't
+know where it comes from or how it was derived, it's just listed here for
+completeness.
+
+Temp3-temp7 support NTC thermistors. For these channels, the driver returns
+the voltages as seen at the individual pins of UCH1-UCH5. The voltage at the
+pin (Vpin) is formed by a voltage divider made of the thermistor (Rth) and a
+scaling resistor (Rs):
+
+Vpin = 2200 * Rth / (Rs + Rth)   (2200 is the ADC max limit of 2200 mV)
+
+The equation for the thermistor is as follows (google it if you want to know
+more about it):
+
+Rth = Ro * exp(B * (1 / T - 1 / To))   (To is 298.15K (25C) and Ro is the
+                                        nominal resistance at 25C)
+
+Mingling the above two equations and assuming Rs = Ro and B = 3435 yields the
+following formula for sensors.conf:
+
+compute tempx 1 / (1 / 298.15 - (` (2200 / @ - 1)) / 3435) - 273.15,
+              2200 / (1 + (^ (3435 / 298.15 - 3435 / (273.15 + @))))
+
+
+Fan Speed Control
+-----------------
+
+The VT1211 provides 2 programmable PWM outputs to control the speeds of 2
+fans. Writing a 2 to any of the two pwm[1-2]_enable sysfs nodes will put the
+PWM controller in automatic mode. There is only a single controller that
+controls both PWM outputs but each PWM output can be individually enabled and
+disabled.
+
+Each PWM has 4 associated distinct output duty-cycles: full, high, low and
+off. Full and off are internally hard-wired to 255 (100%) and 0 (0%),
+respectively. High and low can be programmed via
+pwm[1-2]_auto_point[2-3]_pwm. Each PWM output can be associated with a
+different thermal input but - and here's the weird part - only one set of
+thermal thresholds exist that controls both PWMs output duty-cycles. The
+thermal thresholds are accessible via pwm[1-2]_auto_point[1-4]_temp. Note
+that even though there are 2 sets of 4 auto points each, they map to the same
+registers in the VT1211 and programming one set is sufficient (actually only
+the first set pwm1_auto_point[1-4]_temp is writable, the second set is
+read-only).
+
+PWM Auto Point             PWM Output Duty-Cycle
+------------------------------------------------
+pwm[1-2]_auto_point4_pwm   full speed duty-cycle (hard-wired to 255)
+pwm[1-2]_auto_point3_pwm   high speed duty-cycle
+pwm[1-2]_auto_point2_pwm   low speed duty-cycle
+pwm[1-2]_auto_point1_pwm   off duty-cycle (hard-wired to 0)
+
+Temp Auto Point             Thermal Threshold
+---------------------------------------------
+pwm[1-2]_auto_point4_temp   full speed temp
+pwm[1-2]_auto_point3_temp   high speed temp
+pwm[1-2]_auto_point2_temp   low speed temp
+pwm[1-2]_auto_point1_temp   off temp
+
+Long story short, the controller implements the following algorithm to set the
+PWM output duty-cycle based on the input temperature:
+
+Thermal Threshold             Output Duty-Cycle
+                    (Rising Temp)           (Falling Temp)
+----------------------------------------------------------
+                    full speed duty-cycle   full speed duty-cycle
+full speed temp
+                    high speed duty-cycle   full speed duty-cycle
+high speed temp
+                    low speed duty-cycle    high speed duty-cycle
+low speed temp
+                    off duty-cycle          low speed duty-cycle
+off temp
diff --git a/Documentation/hwmon/w83627ehf b/Documentation/hwmon/w83627ehf
new file mode 100644
index 0000000..fae3b78
--- /dev/null
+++ b/Documentation/hwmon/w83627ehf
@@ -0,0 +1,85 @@
+Kernel driver w83627ehf
+=======================
+
+Supported chips:
+  * Winbond W83627EHF/EHG (ISA access ONLY)
+    Prefix: 'w83627ehf'
+    Addresses scanned: ISA address retrieved from Super I/O registers
+    Datasheet: http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/W83627EHF_%20W83627EHGb.pdf
+
+Authors:
+        Jean Delvare <khali@linux-fr.org>
+        Yuan Mu (Winbond)
+        Rudolf Marek <r.marek@sh.cvut.cz>
+
+Description
+-----------
+
+This driver implements support for the Winbond W83627EHF and W83627EHG
+super I/O chips. We will refer to them collectively as Winbond chips.
+
+The chips implement three temperature sensors, five fan rotation
+speed sensors, ten analog voltage sensors, alarms with beep warnings (control
+unimplemented), and some automatic fan regulation strategies (plus manual
+fan control mode).
+
+Temperatures are measured in degrees Celsius and measurement resolution is 1
+degC for temp1 and 0.5 degC for temp2 and temp3. An alarm is triggered when
+the temperature gets higher than high limit; it stays on until the temperature
+falls below the Hysteresis value.
+
+Fan rotation speeds are reported in RPM (rotations per minute). An alarm is
+triggered if the rotation speed has dropped below a programmable limit. Fan
+readings can be divided by a programmable divider (1, 2, 4, 8, 16, 32, 64 or
+128) to give the readings more range or accuracy. The driver sets the most
+suitable fan divisor itself. Some fans might not be present because they
+share pins with other functions.
+
+Voltage sensors (also known as IN sensors) report their values in millivolts.
+An alarm is triggered if the voltage has crossed a programmable minimum
+or maximum limit.
+
+The driver supports automatic fan control mode known as Thermal Cruise.
+In this mode, the chip attempts to keep the measured temperature in a
+predefined temperature range. If the temperature goes out of range, fan
+is driven slower/faster to reach the predefined range again.
+
+The mode works for fan1-fan4. Mapping of temperatures to pwm outputs is as
+follows:
+
+temp1 -> pwm1
+temp2 -> pwm2
+temp3 -> pwm3
+prog  -> pwm4 (the programmable setting is not supported by the driver)
+
+/sys files
+----------
+
+pwm[1-4] - this file stores PWM duty cycle or DC value (fan speed) in range:
+	   0 (stop) to 255 (full)
+
+pwm[1-4]_enable - this file controls mode of fan/temperature control:
+	* 1 Manual Mode, write to pwm file any value 0-255 (full speed)
+	* 2 Thermal Cruise
+
+Thermal Cruise mode
+-------------------
+
+If the temperature is in the range defined by:
+
+pwm[1-4]_target    - set target temperature, unit millidegree Celcius
+		     (range 0 - 127000)
+pwm[1-4]_tolerance - tolerance, unit millidegree Celcius (range 0 - 15000)
+
+there are no changes to fan speed. Once the temperature leaves the interval,
+fan speed increases (temp is higher) or decreases if lower than desired.
+There are defined steps and times, but not exported by the driver yet.
+
+pwm[1-4]_min_output - minimum fan speed (range 1 - 255), when the temperature
+                      is below defined range.
+pwm[1-4]_stop_time  - how many milliseconds [ms] must elapse to switch
+                      corresponding fan off. (when the temperature was below
+                      defined range).
+
+Note: last two functions are influenced by other control bits, not yet exported
+      by the driver, so a change might not have any effect.
diff --git a/Documentation/hwmon/w83791d b/Documentation/hwmon/w83791d
index 83a3836..19b2ed7 100644
--- a/Documentation/hwmon/w83791d
+++ b/Documentation/hwmon/w83791d
@@ -5,7 +5,7 @@ Supported chips:
   * Winbond W83791D
     Prefix: 'w83791d'
     Addresses scanned: I2C 0x2c - 0x2f
-    Datasheet: http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/W83791Da.pdf
+    Datasheet: http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/W83791D_W83791Gb.pdf
 
 Author: Charles Spirakis <bezaur@gmail.com>
 
@@ -20,6 +20,9 @@ Credits:
     Chunhao Huang <DZShen@Winbond.com.tw>,
     Rudolf Marek <r.marek@sh.cvut.cz>
 
+Additional contributors:
+    Sven Anders <anders@anduras.de>
+
 Module Parameters
 -----------------
 
@@ -46,7 +49,8 @@ Module Parameters
 Description
 -----------
 
-This driver implements support for the Winbond W83791D chip.
+This driver implements support for the Winbond W83791D chip. The W83791G
+chip appears to be the same as the W83791D but is lead free.
 
 Detection of the chip can sometimes be foiled because it can be in an
 internal state that allows no clean access (Bank with ID register is not
@@ -71,34 +75,36 @@ Voltage sensors (also known as IN sensors) report their values in millivolts.
 An alarm is triggered if the voltage has crossed a programmable minimum
 or maximum limit.
 
-Alarms are provided as output from a "realtime status register". The
-following bits are defined:
-
-bit - alarm on:
-0  - Vcore
-1  - VINR0
-2  - +3.3VIN
-3  - 5VDD
-4  - temp1
-5  - temp2
-6  - fan1
-7  - fan2
-8  - +12VIN
-9  - -12VIN
-10 - -5VIN
-11 - fan3
-12 - chassis
-13 - temp3
-14 - VINR1
-15 - reserved
-16 - tart1
-17 - tart2
-18 - tart3
-19 - VSB
-20 - VBAT
-21 - fan4
-22 - fan5
-23 - reserved
+The bit ordering for the alarm "realtime status register" and the
+"beep enable registers" are different.
+
+in0 (VCORE)  :  alarms: 0x000001 beep_enable: 0x000001
+in1 (VINR0)  :  alarms: 0x000002 beep_enable: 0x002000 <== mismatch
+in2 (+3.3VIN):  alarms: 0x000004 beep_enable: 0x000004
+in3 (5VDD)   :  alarms: 0x000008 beep_enable: 0x000008
+in4 (+12VIN) :  alarms: 0x000100 beep_enable: 0x000100
+in5 (-12VIN) :  alarms: 0x000200 beep_enable: 0x000200
+in6 (-5VIN)  :  alarms: 0x000400 beep_enable: 0x000400
+in7 (VSB)    :  alarms: 0x080000 beep_enable: 0x010000 <== mismatch
+in8 (VBAT)   :  alarms: 0x100000 beep_enable: 0x020000 <== mismatch
+in9 (VINR1)  :  alarms: 0x004000 beep_enable: 0x004000
+temp1        :  alarms: 0x000010 beep_enable: 0x000010
+temp2        :  alarms: 0x000020 beep_enable: 0x000020
+temp3        :  alarms: 0x002000 beep_enable: 0x000002 <== mismatch
+fan1         :  alarms: 0x000040 beep_enable: 0x000040
+fan2         :  alarms: 0x000080 beep_enable: 0x000080
+fan3         :  alarms: 0x000800 beep_enable: 0x000800
+fan4         :  alarms: 0x200000 beep_enable: 0x200000
+fan5         :  alarms: 0x400000 beep_enable: 0x400000
+tart1        :  alarms: 0x010000 beep_enable: 0x040000 <== mismatch
+tart2        :  alarms: 0x020000 beep_enable: 0x080000 <== mismatch
+tart3        :  alarms: 0x040000 beep_enable: 0x100000 <== mismatch
+case_open    :  alarms: 0x001000 beep_enable: 0x001000
+user_enable  :  alarms: -------- beep_enable: 0x800000
+
+*** NOTE: It is the responsibility of user-space code to handle the fact
+that the beep enable and alarm bits are in different positions when using that
+feature of the chip.
 
 When an alarm goes off, you can be warned by a beeping signal through your
 computer speaker. It is possible to enable all beeping globally, or only
@@ -109,5 +115,6 @@ often will do no harm, but will return 'old' values.
 
 W83791D TODO:
 ---------------
-Provide a patch for per-file alarms as discussed on the mailing list
+Provide a patch for per-file alarms and beep enables as defined in the hwmon
+	documentation (Documentation/hwmon/sysfs-interface)
 Provide a patch for smart-fan control (still need appropriate motherboard/fans)
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 5498324..137e993 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -110,6 +110,13 @@ be entered as an environment variable, whereas its absence indicates that
 it will appear as a kernel argument readable via /proc/cmdline by programs
 running once the system is up.
 
+The number of kernel parameters is not limited, but the length of the
+complete command line (parameters including spaces etc.) is limited to
+a fixed number of characters. This limit depends on the architecture
+and is between 256 and 4096 characters. It is defined in the file
+./include/asm/setup.h as COMMAND_LINE_SIZE.
+
+
 	53c7xx=		[HW,SCSI] Amiga SCSI controllers
 			See header of drivers/scsi/53c7xx.c.
 			See also Documentation/scsi/ncr53c7xx.txt.
@@ -1324,7 +1331,7 @@ running once the system is up.
 	pt.		[PARIDE]
 			See Documentation/paride.txt.
 
-	quiet=		[KNL] Disable log messages
+	quiet		[KNL] Disable most log messages
 
 	r128=		[HW,DRM]
 
diff --git a/Documentation/networking/pktgen.txt b/Documentation/networking/pktgen.txt
index 44f2f76..18d385c 100644
--- a/Documentation/networking/pktgen.txt
+++ b/Documentation/networking/pktgen.txt
@@ -100,6 +100,7 @@ Examples:
                          are: IPSRC_RND #IP Source is random (between min/max),
                               IPDST_RND, UDPSRC_RND,
                               UDPDST_RND, MACSRC_RND, MACDST_RND 
+                              MPLS_RND, VID_RND, SVID_RND
 
  pgset "udp_src_min 9"   set UDP source port min, If < udp_src_max, then
                          cycle through the port range.
@@ -125,6 +126,21 @@ Examples:
 
  pgset "mpls 0"		  turn off mpls (or any invalid argument works too!)
 
+ pgset "vlan_id 77"       set VLAN ID 0-4095
+ pgset "vlan_p 3"         set priority bit 0-7 (default 0)
+ pgset "vlan_cfi 0"       set canonical format identifier 0-1 (default 0)
+
+ pgset "svlan_id 22"      set SVLAN ID 0-4095
+ pgset "svlan_p 3"        set priority bit 0-7 (default 0)
+ pgset "svlan_cfi 0"      set canonical format identifier 0-1 (default 0)
+
+ pgset "vlan_id 9999"     > 4095 remove vlan and svlan tags
+ pgset "svlan 9999"       > 4095 remove svlan tag
+
+
+ pgset "tos XX"           set former IPv4 TOS field (e.g. "tos 28" for AF11 no ECN, default 00)
+ pgset "traffic_class XX" set former IPv6 TRAFFIC CLASS (e.g. "traffic_class B8" for EF no ECN, default 00)
+
  pgset stop    	          aborts injection. Also, ^C aborts generator.
 
 
diff --git a/Documentation/seclvl.txt b/Documentation/seclvl.txt
deleted file mode 100644
index 97274d1..0000000
--- a/Documentation/seclvl.txt
+++ /dev/null
@@ -1,97 +0,0 @@
-BSD Secure Levels Linux Security Module
-Michael A. Halcrow <mike@halcrow.us>
-
-
-Introduction
-
-Under the BSD Secure Levels security model, sets of policies are
-associated with levels. Levels range from -1 to 2, with -1 being the
-weakest and 2 being the strongest. These security policies are
-enforced at the kernel level, so not even the superuser is able to
-disable or circumvent them. This hardens the machine against attackers
-who gain root access to the system.
-
-
-Levels and Policies
-
-Level -1 (Permanently Insecure):
- - Cannot increase the secure level
-
-Level 0 (Insecure):
- - Cannot ptrace the init process
-
-Level 1 (Default):
- - /dev/mem and /dev/kmem are read-only
- - IMMUTABLE and APPEND extended attributes, if set, may not be unset
- - Cannot load or unload kernel modules
- - Cannot write directly to a mounted block device
- - Cannot perform raw I/O operations
- - Cannot perform network administrative tasks
- - Cannot setuid any file
-
-Level 2 (Secure):
- - Cannot decrement the system time
- - Cannot write to any block device, whether mounted or not
- - Cannot unmount any mounted filesystems
-
-
-Compilation
-
-To compile the BSD Secure Levels LSM, seclvl.ko, enable the
-SECURITY_SECLVL configuration option.  This is found under Security
-options -> BSD Secure Levels in the kernel configuration menu.
-
-
-Basic Usage
-
-Once the machine is in a running state, with all the necessary modules
-loaded and all the filesystems mounted, you can load the seclvl.ko
-module:
-
-# insmod seclvl.ko
-
-The module defaults to secure level 1, except when compiled directly
-into the kernel, in which case it defaults to secure level 0. To raise
-the secure level to 2, the administrator writes ``2'' to the
-seclvl/seclvl file under the sysfs mount point (assumed to be /sys in
-these examples):
-
-# echo -n "2" > /sys/seclvl/seclvl
-
-Alternatively, you can initialize the module at secure level 2 with
-the initlvl module parameter:
-
-# insmod seclvl.ko initlvl=2
-
-At this point, it is impossible to remove the module or reduce the
-secure level.  If the administrator wishes to have the option of doing
-so, he must provide a module parameter, sha1_passwd, that specifies
-the SHA1 hash of the password that can be used to reduce the secure
-level to 0.
-
-To generate this SHA1 hash, the administrator can use OpenSSL:
-
-# echo -n "boogabooga" | openssl sha1
-abeda4e0f33defa51741217592bf595efb8d289c
-
-In order to use password-instigated secure level reduction, the SHA1
-crypto module must be loaded or compiled into the kernel:
-
-# insmod sha1.ko
-
-The administrator can then insmod the seclvl module, including the
-SHA1 hash of the password:
-
-# insmod seclvl.ko
-         sha1_passwd=abeda4e0f33defa51741217592bf595efb8d289c
-
-To reduce the secure level, write the password to seclvl/passwd under
-your sysfs mount point:
-
-# echo -n "boogabooga" > /sys/seclvl/passwd
-
-The September 2004 edition of Sys Admin Magazine has an article about
-the BSD Secure Levels LSM.  I encourage you to refer to that article
-for a more in-depth treatment of this security module:
-
-http://www.samag.com/documents/s=9304/sam0409a/0409a.htm
diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88
index 00d9a1f..669a09a 100644
--- a/Documentation/video4linux/CARDLIST.cx88
+++ b/Documentation/video4linux/CARDLIST.cx88
@@ -7,10 +7,10 @@
   6 -> AverTV Studio 303 (M126)                            [1461:000b]
   7 -> MSI TV-@nywhere Master                              [1462:8606]
   8 -> Leadtek Winfast DV2000                              [107d:6620]
-  9 -> Leadtek PVR 2000                                    [107d:663b,107d:663C]
+  9 -> Leadtek PVR 2000                                    [107d:663b,107d:663c,107d:6632]
  10 -> IODATA GV-VCP3/PCI                                  [10fc:d003]
  11 -> Prolink PlayTV PVR
- 12 -> ASUS PVR-416                                        [1043:4823]
+ 12 -> ASUS PVR-416                                        [1043:4823,1461:c111]
  13 -> MSI TV-@nywhere
  14 -> KWorld/VStream XPert DVB-T                          [17de:08a6]
  15 -> DViCO FusionHDTV DVB-T1                             [18ac:db00]
@@ -51,3 +51,7 @@
  50 -> NPG Tech Real TV FM Top 10                          [14f1:0842]
  51 -> WinFast DTV2000 H                                   [107d:665e]
  52 -> Geniatech DVB-S                                     [14f1:0084]
+ 53 -> Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T  [0070:1404]
+ 54 -> Norwood Micro TV Tuner
+ 55 -> Shenzhen Tungsten Ages Tech TE-DTV-250 / Swann OEM  [c180:c980]
+ 56 -> Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder   [0070:9600,0070:9601,0070:9602]
diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134
index 9068b66..94cf695 100644
--- a/Documentation/video4linux/CARDLIST.saa7134
+++ b/Documentation/video4linux/CARDLIST.saa7134
@@ -58,7 +58,7 @@
  57 -> Avermedia AVerTV GO 007 FM               [1461:f31f]
  58 -> ADS Tech Instant TV (saa7135)            [1421:0350,1421:0351,1421:0370,1421:1370]
  59 -> Kworld/Tevion V-Stream Xpert TV PVR7134
- 60 -> LifeView/Typhoon FlyDVB-T Duo Cardbus    [5168:0502,4e42:0502]
+ 60 -> LifeView/Typhoon/Genius FlyDVB-T Duo Cardbus [5168:0502,4e42:0502,1489:0502]
  61 -> Philips TOUGH DVB-T reference design     [1131:2004]
  62 -> Compro VideoMate TV Gold+II
  63 -> Kworld Xpert TV PVR7134
@@ -83,7 +83,7 @@
  82 -> MSI TV@Anywhere plus                     [1462:6231]
  83 -> Terratec Cinergy 250 PCI TV              [153b:1160]
  84 -> LifeView FlyDVB Trio                     [5168:0319]
- 85 -> AverTV DVB-T 777                         [1461:2c05]
+ 85 -> AverTV DVB-T 777                         [1461:2c05,1461:2c05]
  86 -> LifeView FlyDVB-T / Genius VideoWonder DVB-T [5168:0301,1489:0301]
  87 -> ADS Instant TV Duo Cardbus PTV331        [0331:1421]
  88 -> Tevion/KWorld DVB-T 220RF                [17de:7201]
@@ -94,3 +94,6 @@
  93 -> Medion 7134 Bridge #2                    [16be:0005]
  94 -> LifeView FlyDVB-T Hybrid Cardbus         [5168:3306,5168:3502]
  95 -> LifeView FlyVIDEO3000 (NTSC)             [5169:0138]
+ 96 -> Medion Md8800 Quadro                     [16be:0007,16be:0008]
+ 97 -> LifeView FlyDVB-S /Acorp TV134DS         [5168:0300,4e42:0300]
+ 98 -> Proteus Pro 2309                         [0919:2003]
diff --git a/Documentation/video4linux/bttv/Insmod-options b/Documentation/video4linux/bttv/Insmod-options
index fc94ff2..bb7c2ca 100644
--- a/Documentation/video4linux/bttv/Insmod-options
+++ b/Documentation/video4linux/bttv/Insmod-options
@@ -54,6 +54,12 @@ bttv.o
 				dropouts.
 		chroma_agc=0/1	AGC of chroma signal, off by default.
 		adc_crush=0/1	Luminance ADC crush, on by default.
+		i2c_udelay=     Allow reduce I2C speed. Default is 5 usecs
+				(meaning 66,67 Kbps). The default is the
+				maximum supported speed by kernel bitbang
+				algoritm. You may use lower numbers, if I2C
+				messages are lost (16 is known to work on
+				all supported cards).
 
 		bttv_gpio=0/1
 		gpiomask=
diff --git a/Documentation/video4linux/cx2341x/README.hm12 b/Documentation/video4linux/cx2341x/README.hm12
new file mode 100644
index 0000000..0e213ed
--- /dev/null
+++ b/Documentation/video4linux/cx2341x/README.hm12
@@ -0,0 +1,116 @@
+The cx23416 can produce (and the cx23415 can also read) raw YUV output. The
+format of a YUV frame is specific to this chip and is called HM12. 'HM' stands
+for 'Hauppauge Macroblock', which is a misnomer as 'Conexant Macroblock' would
+be more accurate.
+
+The format is YUV 4:2:0 which uses 1 Y byte per pixel and 1 U and V byte per
+four pixels.
+
+The data is encoded as two macroblock planes, the first containing the Y
+values, the second containing UV macroblocks.
+
+The Y plane is divided into blocks of 16x16 pixels from left to right
+and from top to bottom. Each block is transmitted in turn, line-by-line.
+
+So the first 16 bytes are the first line of the top-left block, the
+second 16 bytes are the second line of the top-left block, etc. After
+transmitting this block the first line of the block on the right to the
+first block is transmitted, etc.
+
+The UV plane is divided into blocks of 16x8 UV values going from left
+to right, top to bottom. Each block is transmitted in turn, line-by-line.
+
+So the first 16 bytes are the first line of the top-left block and
+contain 8 UV value pairs (16 bytes in total). The second 16 bytes are the
+second line of 8 UV pairs of the top-left block, etc. After transmitting
+this block the first line of the block on the right to the first block is
+transmitted, etc.
+
+The code below is given as an example on how to convert HM12 to separate
+Y, U and V planes. This code assumes frames of 720x576 (PAL) pixels.
+
+The width of a frame is always 720 pixels, regardless of the actual specified
+width.
+
+--------------------------------------------------------------------------
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+static unsigned char frame[576*720*3/2];
+static unsigned char framey[576*720];
+static unsigned char frameu[576*720 / 4];
+static unsigned char framev[576*720 / 4];
+
+static void de_macro_y(unsigned char* dst, unsigned char *src, int dstride, int w, int h)
+{
+    unsigned int y, x, i;
+
+    // descramble Y plane
+    // dstride = 720 = w
+    // The Y plane is divided into blocks of 16x16 pixels
+    // Each block in transmitted in turn, line-by-line.
+    for (y = 0; y < h; y += 16) {
+	for (x = 0; x < w; x += 16) {
+	    for (i = 0; i < 16; i++) {
+		memcpy(dst + x + (y + i) * dstride, src, 16);
+		src += 16;
+	    }
+	}
+    }
+}
+
+static void de_macro_uv(unsigned char *dstu, unsigned char *dstv, unsigned char *src, int dstride, int w, int h)
+{
+    unsigned int y, x, i;
+
+    // descramble U/V plane
+    // dstride = 720 / 2 = w
+    // The U/V values are interlaced (UVUV...).
+    // Again, the UV plane is divided into blocks of 16x16 UV values.
+    // Each block in transmitted in turn, line-by-line.
+    for (y = 0; y < h; y += 16) {
+	for (x = 0; x < w; x += 8) {
+	    for (i = 0; i < 16; i++) {
+		int idx = x + (y + i) * dstride;
+
+		dstu[idx+0] = src[0];  dstv[idx+0] = src[1];
+		dstu[idx+1] = src[2];  dstv[idx+1] = src[3];
+		dstu[idx+2] = src[4];  dstv[idx+2] = src[5];
+		dstu[idx+3] = src[6];  dstv[idx+3] = src[7];
+		dstu[idx+4] = src[8];  dstv[idx+4] = src[9];
+		dstu[idx+5] = src[10]; dstv[idx+5] = src[11];
+		dstu[idx+6] = src[12]; dstv[idx+6] = src[13];
+		dstu[idx+7] = src[14]; dstv[idx+7] = src[15];
+		src += 16;
+	    }
+	}
+    }
+}
+
+/*************************************************************************/
+int main(int argc, char **argv)
+{
+    FILE *fin;
+    int i;
+
+    if (argc == 1) fin = stdin;
+    else fin = fopen(argv[1], "r");
+
+    if (fin == NULL) {
+	fprintf(stderr, "cannot open input\n");
+	exit(-1);
+    }
+    while (fread(frame, sizeof(frame), 1, fin) == 1) {
+	de_macro_y(framey, frame, 720, 720, 576);
+	de_macro_uv(frameu, framev, frame + 720 * 576, 720 / 2, 720 / 2, 576 / 2);
+	fwrite(framey, sizeof(framey), 1, stdout);
+	fwrite(framev, sizeof(framev), 1, stdout);
+	fwrite(frameu, sizeof(frameu), 1, stdout);
+    }
+    fclose(fin);
+    return 0;
+}
+
+--------------------------------------------------------------------------
diff --git a/Documentation/video4linux/cx2341x/README.vbi b/Documentation/video4linux/cx2341x/README.vbi
new file mode 100644
index 0000000..5807cf1
--- /dev/null
+++ b/Documentation/video4linux/cx2341x/README.vbi
@@ -0,0 +1,45 @@
+
+Format of embedded V4L2_MPEG_STREAM_VBI_FMT_IVTV VBI data
+=========================================================
+
+This document describes the V4L2_MPEG_STREAM_VBI_FMT_IVTV format of the VBI data
+embedded in an MPEG-2 program stream. This format is in part dictated by some
+hardware limitations of the ivtv driver (the driver for the Conexant cx23415/6
+chips), in particular a maximum size for the VBI data. Anything longer is cut
+off when the MPEG stream is played back through the cx23415.
+
+The advantage of this format is it is very compact and that all VBI data for
+all lines can be stored while still fitting within the maximum allowed size.
+
+The stream ID of the VBI data is 0xBD. The maximum size of the embedded data is
+4 + 43 * 36, which is 4 bytes for a header and 2 * 18 VBI lines with a 1 byte
+header and a 42 bytes payload each. Anything beyond this limit is cut off by
+the cx23415/6 firmware. Besides the data for the VBI lines we also need 36 bits
+for a bitmask determining which lines are captured and 4 bytes for a magic cookie,
+signifying that this data package contains V4L2_MPEG_STREAM_VBI_FMT_IVTV VBI data.
+If all lines are used, then there is no longer room for the bitmask. To solve this
+two different magic numbers were introduced:
+
+'itv0': After this magic number two unsigned longs follow. Bits 0-17 of the first
+unsigned long denote which lines of the first field are captured. Bits 18-31 of
+the first unsigned long and bits 0-3 of the second unsigned long are used for the
+second field.
+
+'ITV0': This magic number assumes all VBI lines are captured, i.e. it implicitly
+implies that the bitmasks are 0xffffffff and 0xf.
+
+After these magic cookies (and the 8 byte bitmask in case of cookie 'itv0') the
+captured VBI lines start:
+
+For each line the least significant 4 bits of the first byte contain the data type.
+Possible values are shown in the table below. The payload is in the following 42
+bytes.
+
+Here is the list of possible data types:
+
+#define IVTV_SLICED_TYPE_TELETEXT       0x1     // Teletext (uses lines 6-22 for PAL)
+#define IVTV_SLICED_TYPE_CC             0x4     // Closed Captions (line 21 NTSC)
+#define IVTV_SLICED_TYPE_WSS            0x5     // Wide Screen Signal (line 23 PAL)
+#define IVTV_SLICED_TYPE_VPS            0x7     // Video Programming System (PAL) (line 16)
+
+Hans Verkuil <hverkuil@xs4all.nl>
diff --git a/Documentation/x86_64/boot-options.txt b/Documentation/x86_64/boot-options.txt
index 4303e0c..74b77f9 100644
--- a/Documentation/x86_64/boot-options.txt
+++ b/Documentation/x86_64/boot-options.txt
@@ -199,6 +199,11 @@ IOMMU
    allowed  overwrite iommu off workarounds for specific chipsets.
    soft	 Use software bounce buffering (default for Intel machines)
    noaperture Don't touch the aperture for AGP.
+   allowdac Allow DMA >4GB
+	    When off all DMA over >4GB is forced through an IOMMU or bounce
+	    buffering.
+   nodac    Forbid DMA >4GB
+   panic    Always panic when IOMMU overflows
 
   swiotlb=pages[,force]