Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (44 commits)
  [ARM] 3541/2: workaround for PXA27x erratum E7
  [ARM] nommu: provide a way for correct control register value selection
  [ARM] 3705/1: add supersection support to ioremap()
  [ARM] 3707/1: iwmmxt: use the generic thread notifier infrastructure
  [ARM] 3706/2: ep93xx: add cirrus logic edb9315a support
  [ARM] 3704/1: format IOP Kconfig with tabs, create more consistency
  [ARM] 3703/1: Add help description for ARCH_EP80219
  [ARM] 3678/1: MMC: Make OMAP MMC work
  [ARM] 3677/1: OMAP: Update H2 defconfig
  [ARM] 3676/1: ARM: OMAP: Fix dmtimers and timer32k to compile on OMAP1
  [ARM] Add section support to ioremap
  [ARM] Fix sa11x0 SDRAM selection
  [ARM] Set bit 4 on section mappings correctly depending on CPU
  [ARM] 3666/1: TRIZEPS4 [1/5] core
  ARM: OMAP: Multiplexing for 24xx GPMC wait pin monitoring
  ARM: OMAP: Fix SRAM to use MT_MEMORY instead of MT_DEVICE
  ARM: OMAP: Update dmtimers
  ARM: OMAP: Make clock variables static
  ARM: OMAP: Fix GPMC compilation when DEBUG is defined
  ARM: OMAP: Mux updates for external DMA and GPIO
  ...

7 files changed, 731 insertions, 24 deletions

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index ea5137f..03d07ca 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -35,6 +35,10 @@ config PXA_SHARPSL
 	  SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
 	  handheld computer.
 
+config MACH_TRIZEPS4
+	bool "Keith und Koep Trizeps4 DIMM-Module"
+	select PXA27x
+
 endchoice
 
 if PXA_SHARPSL
@@ -55,6 +59,21 @@ endchoice
 
 endif
 
+if MACH_TRIZEPS4
+
+choice
+	prompt "Select base board for Trizeps 4 module"
+
+config MACH_TRIZEPS4_CONXS
+	bool "ConXS Eval Board"
+
+config MACH_TRIZEPS4_ANY
+	bool "another Board"
+
+endchoice
+
+endif
+
 endmenu
 
 config MACH_POODLE
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 1610690..9093eb1c9 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o
 obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o
 obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o
 obj-$(CONFIG_ARCH_PXA_IDP) += idp.o
+obj-$(CONFIG_MACH_TRIZEPS4)	+= trizeps4.o
 obj-$(CONFIG_PXA_SHARP_C7xx)	+= corgi.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o corgi_pm.o
 obj-$(CONFIG_PXA_SHARP_Cxx00)	+= spitz.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o spitz_pm.o
 obj-$(CONFIG_MACH_AKITA)	+= akita-ioexp.o
@@ -23,6 +24,7 @@ led-y := leds.o
 led-$(CONFIG_ARCH_LUBBOCK) += leds-lubbock.o
 led-$(CONFIG_MACH_MAINSTONE) += leds-mainstone.o
 led-$(CONFIG_ARCH_PXA_IDP) += leds-idp.o
+led-$(CONFIG_MACH_TRIZEPS4) += leds-trizeps4.o
 
 obj-$(CONFIG_LEDS) += $(led-y)
 
diff --git a/arch/arm/mach-pxa/leds-trizeps4.c b/arch/arm/mach-pxa/leds-trizeps4.c
new file mode 100644
index 0000000..14cfc85
--- /dev/null
+++ b/arch/arm/mach-pxa/leds-trizeps4.c
@@ -0,0 +1,134 @@
+/*
+ * linux/arch/arm/mach-pxa/leds-trizeps4.c
+ *
+ *  Author:	Jürgen Schindele
+ *  Created:	20 02, 2006
+ *  Copyright:	Jürgen Schindele
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+
+#include <asm/hardware.h>
+#include <asm/system.h>
+#include <asm/types.h>
+#include <asm/leds.h>
+
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/trizeps4.h>
+
+#include "leds.h"
+
+#define LED_STATE_ENABLED	1
+#define LED_STATE_CLAIMED	2
+
+#define SYS_BUSY		0x01
+#define HEARTBEAT		0x02
+#define BLINK			0x04
+
+static unsigned int led_state;
+static unsigned int hw_led_state;
+
+void trizeps4_leds_event(led_event_t evt)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	switch (evt) {
+	case led_start:
+		hw_led_state = 0;
+		pxa_gpio_mode( GPIO_SYS_BUSY_LED  | GPIO_OUT);		/* LED1 */
+		pxa_gpio_mode( GPIO_HEARTBEAT_LED | GPIO_OUT);		/* LED2 */
+		led_state = LED_STATE_ENABLED;
+		break;
+
+	case led_stop:
+		led_state &= ~LED_STATE_ENABLED;
+		break;
+
+	case led_claim:
+		led_state |= LED_STATE_CLAIMED;
+		hw_led_state = 0;
+		break;
+
+	case led_release:
+		led_state &= ~LED_STATE_CLAIMED;
+		hw_led_state = 0;
+		break;
+
+#ifdef CONFIG_LEDS_TIMER
+	case led_timer:
+		hw_led_state ^= HEARTBEAT;
+		break;
+#endif
+
+#ifdef CONFIG_LEDS_CPU
+	case led_idle_start:
+		hw_led_state &= ~SYS_BUSY;
+		break;
+
+	case led_idle_end:
+		hw_led_state |= SYS_BUSY;
+		break;
+#endif
+
+	case led_halted:
+		break;
+
+	case led_green_on:
+		hw_led_state |= BLINK;
+		break;
+
+	case led_green_off:
+		hw_led_state &= ~BLINK;
+		break;
+
+	case led_amber_on:
+		break;
+
+	case led_amber_off:
+		break;
+
+	case led_red_on:
+		break;
+
+	case led_red_off:
+		break;
+
+	default:
+		break;
+	}
+
+	if  (led_state & LED_STATE_ENABLED) {
+		switch (hw_led_state) {
+			case 0:
+				GPSR(GPIO_SYS_BUSY_LED)  |= GPIO_bit(GPIO_SYS_BUSY_LED);
+				GPSR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
+				break;
+			case 1:
+				GPCR(GPIO_SYS_BUSY_LED)  |= GPIO_bit(GPIO_SYS_BUSY_LED);
+				GPSR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
+				break;
+			case 2:
+				GPSR(GPIO_SYS_BUSY_LED)  |= GPIO_bit(GPIO_SYS_BUSY_LED);
+				GPCR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
+				break;
+			case 3:
+				GPCR(GPIO_SYS_BUSY_LED)  |= GPIO_bit(GPIO_SYS_BUSY_LED);
+				GPCR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
+				break;
+		}
+	}
+	else {
+		/* turn all off */
+		GPSR(GPIO_SYS_BUSY_LED)  |= GPIO_bit(GPIO_SYS_BUSY_LED);
+		GPSR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
+	}
+
+	local_irq_restore(flags);
+}
diff --git a/arch/arm/mach-pxa/leds.c b/arch/arm/mach-pxa/leds.c
index bbe4d5f..e13eb84 100644
--- a/arch/arm/mach-pxa/leds.c
+++ b/arch/arm/mach-pxa/leds.c
@@ -24,6 +24,8 @@ pxa_leds_init(void)
 		leds_event = mainstone_leds_event;
 	if (machine_is_pxa_idp())
 		leds_event = idp_leds_event;
+	if (machine_is_trizeps4())
+		leds_event = trizeps4_leds_event;
 
 	leds_event(led_start);
 	return 0;
diff --git a/arch/arm/mach-pxa/leds.h b/arch/arm/mach-pxa/leds.h
index d98f6e9..4f829b8 100644
--- a/arch/arm/mach-pxa/leds.h
+++ b/arch/arm/mach-pxa/leds.h
@@ -10,3 +10,4 @@
 extern void idp_leds_event(led_event_t evt);
 extern void lubbock_leds_event(led_event_t evt);
 extern void mainstone_leds_event(led_event_t evt);
+extern void trizeps4_leds_event(led_event_t evt);
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index ec0f43a..1a5f5c2 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -248,58 +248,137 @@ static void lpd270_backlight_power(int on)
 
 /* 5.7" TFT QVGA (LoLo display number 1) */
 static struct pxafb_mach_info sharp_lq057q3dc02 __initdata = {
-	.pixclock		= 100000,
-	.xres			= 240,
-	.yres			= 320,
+	.pixclock		= 150000,
+	.xres			= 320,
+	.yres			= 240,
 	.bpp			= 16,
-	.hsync_len		= 64,
-	.left_margin		= 0x27,
-	.right_margin		= 0x09,
-	.vsync_len		= 0x04,
+	.hsync_len		= 0x14,
+	.left_margin		= 0x28,
+	.right_margin		= 0x0a,
+	.vsync_len		= 0x02,
 	.upper_margin		= 0x08,
 	.lower_margin		= 0x14,
-	.sync			= 0,
+	.sync			= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 	.lccr0			= 0x07800080,
-	.lccr3			= 0x04400007,
+	.lccr3			= 0x00400000,
+	.pxafb_backlight_power	= lpd270_backlight_power,
+};
+
+/* 12.1" TFT SVGA (LoLo display number 2) */
+static struct pxafb_mach_info sharp_lq121s1dg31 __initdata = {
+	.pixclock		= 50000,
+	.xres			= 800,
+	.yres			= 600,
+	.bpp			= 16,
+	.hsync_len		= 0x05,
+	.left_margin		= 0x52,
+	.right_margin		= 0x05,
+	.vsync_len		= 0x04,
+	.upper_margin		= 0x14,
+	.lower_margin		= 0x0a,
+	.sync			= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+	.lccr0			= 0x07800080,
+	.lccr3			= 0x00400000,
+	.pxafb_backlight_power	= lpd270_backlight_power,
+};
+
+/* 3.6" TFT QVGA (LoLo display number 3) */
+static struct pxafb_mach_info sharp_lq036q1da01 __initdata = {
+	.pixclock		= 150000,
+	.xres			= 320,
+	.yres			= 240,
+	.bpp			= 16,
+	.hsync_len		= 0x0e,
+	.left_margin		= 0x04,
+	.right_margin		= 0x0a,
+	.vsync_len		= 0x03,
+	.upper_margin		= 0x03,
+	.lower_margin		= 0x03,
+	.sync			= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+	.lccr0			= 0x07800080,
+	.lccr3			= 0x00400000,
 	.pxafb_backlight_power	= lpd270_backlight_power,
 };
 
 /* 6.4" TFT VGA (LoLo display number 5) */
 static struct pxafb_mach_info sharp_lq64d343 __initdata = {
-	.pixclock		= 20000,
+	.pixclock		= 25000,
 	.xres			= 640,
 	.yres			= 480,
 	.bpp			= 16,
-	.hsync_len		= 49,
+	.hsync_len		= 0x31,
 	.left_margin		= 0x89,
 	.right_margin		= 0x19,
-	.vsync_len		= 18,
+	.vsync_len		= 0x12,
 	.upper_margin		= 0x22,
-	.lower_margin		= 0,
+	.lower_margin		= 0x00,
 	.sync			= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 	.lccr0			= 0x07800080,
-	.lccr3			= 0x04400001,
+	.lccr3			= 0x00400000,
+	.pxafb_backlight_power	= lpd270_backlight_power,
+};
+
+/* 10.4" TFT VGA (LoLo display number 7) */
+static struct pxafb_mach_info sharp_lq10d368 __initdata = {
+	.pixclock		= 25000,
+	.xres			= 640,
+	.yres			= 480,
+	.bpp			= 16,
+	.hsync_len		= 0x31,
+	.left_margin		= 0x89,
+	.right_margin		= 0x19,
+	.vsync_len		= 0x12,
+	.upper_margin		= 0x22,
+	.lower_margin		= 0x00,
+	.sync			= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+	.lccr0			= 0x07800080,
+	.lccr3			= 0x00400000,
 	.pxafb_backlight_power	= lpd270_backlight_power,
 };
 
 /* 3.5" TFT QVGA (LoLo display number 8) */
 static struct pxafb_mach_info sharp_lq035q7db02_20 __initdata = {
-	.pixclock		= 100000,
+	.pixclock		= 150000,
 	.xres			= 240,
 	.yres			= 320,
 	.bpp			= 16,
-	.hsync_len		= 0x34,
-	.left_margin		= 0x09,
-	.right_margin		= 0x09,
-	.vsync_len		= 0x08,
+	.hsync_len		= 0x0e,
+	.left_margin		= 0x0a,
+	.right_margin		= 0x0a,
+	.vsync_len		= 0x03,
 	.upper_margin		= 0x05,
 	.lower_margin		= 0x14,
-	.sync			= 0,
+	.sync			= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 	.lccr0			= 0x07800080,
-	.lccr3			= 0x04400007,
+	.lccr3			= 0x00400000,
 	.pxafb_backlight_power	= lpd270_backlight_power,
 };
 
+static struct pxafb_mach_info *lpd270_lcd_to_use;
+
+static int __init lpd270_set_lcd(char *str)
+{
+	if (!strnicmp(str, "lq057q3dc02", 11)) {
+		lpd270_lcd_to_use = &sharp_lq057q3dc02;
+	} else if (!strnicmp(str, "lq121s1dg31", 11)) {
+		lpd270_lcd_to_use = &sharp_lq121s1dg31;
+	} else if (!strnicmp(str, "lq036q1da01", 11)) {
+		lpd270_lcd_to_use = &sharp_lq036q1da01;
+	} else if (!strnicmp(str, "lq64d343", 8)) {
+		lpd270_lcd_to_use = &sharp_lq64d343;
+	} else if (!strnicmp(str, "lq10d368", 8)) {
+		lpd270_lcd_to_use = &sharp_lq10d368;
+	} else if (!strnicmp(str, "lq035q7db02-20", 14)) {
+		lpd270_lcd_to_use = &sharp_lq035q7db02_20;
+	} else {
+		printk(KERN_INFO "lpd270: unknown lcd panel [%s]\n", str);
+	}
+
+	return 1;
+}
+
+__setup("lcd=", lpd270_set_lcd);
+
 static struct platform_device *platform_devices[] __initdata = {
 	&smc91x_device,
 	&lpd270_audio_device,
@@ -345,9 +424,8 @@ static void __init lpd270_init(void)
 
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
-	// set_pxa_fb_info(&sharp_lq057q3dc02);
-	set_pxa_fb_info(&sharp_lq64d343);
-	// set_pxa_fb_info(&sharp_lq035q7db02_20);
+	if (lpd270_lcd_to_use != NULL)
+		set_pxa_fb_info(lpd270_lcd_to_use);
 
 	pxa_set_ohci_info(&lpd270_ohci_platform_data);
 }
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
new file mode 100644
index 0000000..4ffff9e
--- /dev/null
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -0,0 +1,471 @@
+/*
+ *  linux/arch/arm/mach-pxa/trizeps4.c
+ *
+ *  Support for the Keith und Koep Trizeps4 Module Platform.
+ *
+ *  Author:	Jürgen Schindele
+ *  Created:	20 02, 2006
+ *  Copyright:	Jürgen Schindele
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/bitops.h>
+#include <linux/fb.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/serial_8250.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/sizes.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
+
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/trizeps4.h>
+#include <asm/arch/audio.h>
+#include <asm/arch/pxafb.h>
+#include <asm/arch/mmc.h>
+#include <asm/arch/irda.h>
+#include <asm/arch/ohci.h>
+
+#include "generic.h"
+
+/********************************************************************************************
+ * ONBOARD FLASH
+ ********************************************************************************************/
+static struct mtd_partition trizeps4_partitions[] = {
+	{
+		.name =		"Bootloader",
+		.size =		0x00040000,
+		.offset =	0,
+		.mask_flags =	MTD_WRITEABLE  /* force read-only */
+	},{
+		.name =		"Kernel",
+		.size =		0x00400000,
+		.offset =	0x00040000
+	},{
+		.name =		"Filesystem",
+		.size =		MTDPART_SIZ_FULL,
+		.offset =	0x00440000
+	}
+};
+
+static struct flash_platform_data trizeps4_flash_data[] = {
+	{
+		.map_name	= "cfi_probe",
+		.parts		= trizeps4_partitions,
+		.nr_parts	= ARRAY_SIZE(trizeps4_partitions)
+	}
+};
+
+static struct resource flash_resource = {
+	.start	= PXA_CS0_PHYS,
+	.end	= PXA_CS0_PHYS + SZ_64M - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+	.name		= "pxa2xx-flash",
+	.id		= 0,
+	.dev = {
+		.platform_data = &trizeps4_flash_data,
+	},
+	.resource = &flash_resource,
+	.num_resources = 1,
+};
+
+/********************************************************************************************
+ * DAVICOM DM9000 Ethernet
+ ********************************************************************************************/
+static struct resource dm9000_resources[] = {
+	[0] = {
+		.start	= TRIZEPS4_ETH_PHYS+0x300,
+		.end	= TRIZEPS4_ETH_PHYS+0x400-1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= TRIZEPS4_ETH_PHYS+0x8300,
+		.end	= TRIZEPS4_ETH_PHYS+0x8400-1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= TRIZEPS4_ETH_IRQ,
+		.end	= TRIZEPS4_ETH_IRQ,
+		.flags	= (IORESOURCE_IRQ | IRQT_RISING),
+	},
+};
+
+static struct platform_device dm9000_device = {
+	.name		= "dm9000",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(dm9000_resources),
+	.resource	= dm9000_resources,
+};
+
+/********************************************************************************************
+ * PXA270 serial ports
+ ********************************************************************************************/
+static struct plat_serial8250_port tri_serial_ports[] = {
+#ifdef CONFIG_SERIAL_PXA
+	/* this uses the own PXA driver */
+	{
+		0,
+	},
+#else
+	/* this uses the generic 8520 driver */
+	[0] = {
+		.membase	= (void *)&FFUART,
+		.irq		= IRQ_FFUART,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM32,
+		.regshift	= 2,
+		.uartclk	= (921600*16),
+	},
+	[1] = {
+		.membase	= (void *)&BTUART,
+		.irq		= IRQ_BTUART,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM32,
+		.regshift	= 2,
+		.uartclk	= (921600*16),
+	},
+	{
+		0,
+	},
+#endif
+};
+
+static struct platform_device uart_devices = {
+	.name		= "serial8250",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= tri_serial_ports,
+	},
+	.num_resources	= 0,
+	.resource	= NULL,
+};
+
+/********************************************************************************************
+ * PXA270 ac97 sound codec
+ ********************************************************************************************/
+static struct platform_device ac97_audio_device = {
+	.name		= "pxa2xx-ac97",
+	.id		= -1,
+};
+
+static struct platform_device * trizeps4_devices[] __initdata = {
+	&flash_device,
+	&uart_devices,
+	&dm9000_device,
+	&ac97_audio_device,
+};
+
+#ifdef CONFIG_MACH_TRIZEPS4_CONXS
+static short trizeps_conxs_bcr;
+
+/* PCCARD power switching supports only 3,3V */
+void board_pcmcia_power(int power)
+{
+	if (power) {
+		/* switch power on, put in reset and enable buffers */
+		trizeps_conxs_bcr |= power;
+		trizeps_conxs_bcr |= ConXS_BCR_CF_RESET;
+		trizeps_conxs_bcr &= ~(ConXS_BCR_CF_BUF_EN);
+		ConXS_BCR = trizeps_conxs_bcr;
+		/* wait a little */
+		udelay(2000);
+		/* take reset away */
+		trizeps_conxs_bcr &= ~(ConXS_BCR_CF_RESET);
+		ConXS_BCR = trizeps_conxs_bcr;
+		udelay(2000);
+	} else {
+		/* put in reset */
+		trizeps_conxs_bcr |= ConXS_BCR_CF_RESET;
+		ConXS_BCR = trizeps_conxs_bcr;
+		udelay(1000);
+		/* switch power off */
+		trizeps_conxs_bcr &= ~(0xf);
+		ConXS_BCR = trizeps_conxs_bcr;
+
+	}
+	pr_debug("%s: o%s 0x%x\n", __FUNCTION__, power ? "n": "ff", trizeps_conxs_bcr);
+}
+
+/* backlight power switching for LCD panel */
+static void board_backlight_power(int on)
+{
+	if (on) {
+		trizeps_conxs_bcr |= ConXS_BCR_L_DISP;
+	} else {
+		trizeps_conxs_bcr &= ~ConXS_BCR_L_DISP;
+	}
+	pr_debug("%s: o%s 0x%x\n", __FUNCTION__, on ? "n" : "ff", trizeps_conxs_bcr);
+	ConXS_BCR = trizeps_conxs_bcr;
+}
+
+/* Powersupply for MMC/SD cardslot */
+static void board_mci_power(struct device *dev, unsigned int vdd)
+{
+	struct pxamci_platform_data* p_d = dev->platform_data;
+
+	if (( 1 << vdd) & p_d->ocr_mask) {
+		pr_debug("%s: on\n", __FUNCTION__);
+		/* FIXME fill in values here */
+	} else {
+		pr_debug("%s: off\n", __FUNCTION__);
+		/* FIXME fill in values here */
+	}
+}
+
+static short trizeps_conxs_ircr;
+
+/* Switch modes and Power for IRDA receiver */
+static void board_irda_mode(struct device *dev, int mode)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	if (mode & IR_SIRMODE) {
+		/* Slow mode */
+		trizeps_conxs_ircr &= ~ConXS_IRCR_MODE;
+	} else if (mode & IR_FIRMODE) {
+		/* Fast mode */
+		trizeps_conxs_ircr |= ConXS_IRCR_MODE;
+	}
+	if (mode & IR_OFF) {
+		trizeps_conxs_ircr |= ConXS_IRCR_SD;
+	} else {
+		trizeps_conxs_ircr &= ~ConXS_IRCR_SD;
+	}
+	/* FIXME write values to register */
+	local_irq_restore(flags);
+}
+
+#else
+/* for other baseboards define dummies */
+void board_pcmcia_power(int power)	{;}
+#define board_backlight_power		NULL
+#define board_mci_power			NULL
+#define board_irda_mode			NULL
+
+#endif		/* CONFIG_MACH_TRIZEPS4_CONXS */
+EXPORT_SYMBOL(board_pcmcia_power);
+
+static int trizeps4_mci_init(struct device *dev, irqreturn_t (*mci_detect_int)(int, void *, struct pt_regs *), void *data)
+{
+	int err;
+	/* setup GPIO for PXA27x MMC controller */
+	pxa_gpio_mode(GPIO32_MMCCLK_MD);
+	pxa_gpio_mode(GPIO112_MMCCMD_MD);
+	pxa_gpio_mode(GPIO92_MMCDAT0_MD);
+	pxa_gpio_mode(GPIO109_MMCDAT1_MD);
+	pxa_gpio_mode(GPIO110_MMCDAT2_MD);
+	pxa_gpio_mode(GPIO111_MMCDAT3_MD);
+
+	pxa_gpio_mode(GPIO_MMC_DET | GPIO_IN);
+
+	err = request_irq(TRIZEPS4_MMC_IRQ, mci_detect_int, SA_INTERRUPT | SA_TRIGGER_RISING, "MMC card detect", data);
+	if (err) {
+		printk(KERN_ERR "trizeps4_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
+		return -1;
+	}
+	return 0;
+}
+
+static void trizeps4_mci_exit(struct device *dev, void *data)
+{
+	free_irq(TRIZEPS4_MMC_IRQ, data);
+}
+
+static struct pxamci_platform_data trizeps4_mci_platform_data = {
+	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.init 		= trizeps4_mci_init,
+	.exit		= trizeps4_mci_exit,
+	.setpower 	= board_mci_power,
+};
+
+static struct pxaficp_platform_data trizeps4_ficp_platform_data = {
+	.transceiver_cap  = IR_SIRMODE | IR_FIRMODE | IR_OFF,
+	.transceiver_mode = board_irda_mode,
+};
+
+static int trizeps4_ohci_init(struct device *dev)
+{
+	/* setup Port1 GPIO pin. */
+	pxa_gpio_mode( 88 | GPIO_ALT_FN_1_IN);	/* USBHPWR1 */
+	pxa_gpio_mode( 89 | GPIO_ALT_FN_2_OUT);	/* USBHPEN1 */
+
+	/* Set the Power Control Polarity Low and Power Sense
+	   Polarity Low to active low. */
+	UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
+		~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE);
+
+	return 0;
+}
+
+static void trizeps4_ohci_exit(struct device *dev)
+{
+	;
+}
+
+static struct pxaohci_platform_data trizeps4_ohci_platform_data = {
+	.port_mode	= PMM_PERPORT_MODE,
+	.init		= trizeps4_ohci_init,
+	.exit		= trizeps4_ohci_exit,
+};
+
+static struct map_desc trizeps4_io_desc[] __initdata = {
+	{ 	/* ConXS CFSR */
+		.virtual	= TRIZEPS4_CFSR_VIRT,
+		.pfn		= __phys_to_pfn(TRIZEPS4_CFSR_PHYS),
+		.length		= 0x00001000,
+		.type		= MT_DEVICE
+	},
+	{	/* ConXS BCR */
+		.virtual	= TRIZEPS4_BOCR_VIRT,
+		.pfn		= __phys_to_pfn(TRIZEPS4_BOCR_PHYS),
+		.length		= 0x00001000,
+		.type		= MT_DEVICE
+	},
+	{ 	/* ConXS IRCR */
+		.virtual	= TRIZEPS4_IRCR_VIRT,
+		.pfn		= __phys_to_pfn(TRIZEPS4_IRCR_PHYS),
+		.length		= 0x00001000,
+		.type		= MT_DEVICE
+	},
+	{	/* ConXS DCR */
+		.virtual	= TRIZEPS4_DICR_VIRT,
+		.pfn		= __phys_to_pfn(TRIZEPS4_DICR_PHYS),
+		.length		= 0x00001000,
+		.type		= MT_DEVICE
+	},
+	{	/* ConXS UPSR */
+		.virtual	= TRIZEPS4_UPSR_VIRT,
+		.pfn		= __phys_to_pfn(TRIZEPS4_UPSR_PHYS),
+		.length		= 0x00001000,
+		.type		= MT_DEVICE
+	}
+};
+
+static struct pxafb_mach_info sharp_lcd __initdata = {
+    .pixclock		= 78000,
+    .xres		= 640,
+    .yres		= 480,
+    .bpp		= 8,
+    .hsync_len		= 4,
+    .left_margin	= 4,
+    .right_margin	= 4,
+    .vsync_len		= 2,
+    .upper_margin	= 0,
+    .lower_margin	= 0,
+    .sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+    .cmap_greyscale	= 0,
+    .cmap_inverse	= 0,
+    .cmap_static	= 0,
+    .lccr0		= LCCR0_Color | LCCR0_Pas | LCCR0_Dual,
+    .lccr3		= 0x0340ff02,
+    .pxafb_backlight_power = board_backlight_power,
+};
+
+static void __init trizeps4_fixup(struct machine_desc *desc, struct tag *tags, char **cmdline, struct meminfo *mi)
+{
+}
+
+static void __init trizeps4_init(void)
+{
+	platform_add_devices(trizeps4_devices, ARRAY_SIZE(trizeps4_devices));
+
+	set_pxa_fb_info(&sharp_lcd);
+
+	pxa_set_mci_info(&trizeps4_mci_platform_data);
+	pxa_set_ficp_info(&trizeps4_ficp_platform_data);
+	pxa_set_ohci_info(&trizeps4_ohci_platform_data);
+}
+
+static void __init trizeps4_map_io(void)
+{
+	pxa_map_io();
+	iotable_init(trizeps4_io_desc, ARRAY_SIZE(trizeps4_io_desc));
+
+	/* for DiskOnChip */
+	pxa_gpio_mode(GPIO15_nCS_1_MD);
+
+	/* for off-module PIC on ConXS board */
+	pxa_gpio_mode(GPIO_PIC | GPIO_IN);
+
+	/* UCB1400 irq */
+	pxa_gpio_mode(GPIO_UCB1400 | GPIO_IN);
+
+	/* for DM9000 LAN */
+	pxa_gpio_mode(GPIO78_nCS_2_MD);
+	pxa_gpio_mode(GPIO_DM9000 | GPIO_IN);
+
+	/* for PCMCIA device */
+	pxa_gpio_mode(GPIO_PCD | GPIO_IN);
+	pxa_gpio_mode(GPIO_PRDY | GPIO_IN);
+
+	/* for I2C adapter */
+	pxa_gpio_mode(GPIO117_I2CSCL_MD);
+	pxa_gpio_mode(GPIO118_I2CSDA_MD);
+
+	/* MMC_DET s.o. */
+	pxa_gpio_mode(GPIO_MMC_DET | GPIO_IN);
+
+	/* whats that for ??? */
+	pxa_gpio_mode(GPIO79_nCS_3_MD);
+
+	pxa_gpio_mode( GPIO_SYS_BUSY_LED  | GPIO_OUT);		/* LED1 */
+	pxa_gpio_mode( GPIO_HEARTBEAT_LED | GPIO_OUT);		/* LED2 */
+
+#ifdef CONFIG_MACH_TRIZEPS4_CONXS
+#ifdef CONFIG_IDE_PXA_CF
+	/* if boot direct from compact flash dont disable power */
+	trizeps_conxs_bcr = 0x0009;
+#else
+	/* this is the reset value */
+	trizeps_conxs_bcr = 0x00A0;
+#endif
+	ConXS_BCR = trizeps_conxs_bcr;
+#endif
+
+	PWER  = 0x00000002;
+	PFER  = 0x00000000;
+	PRER  = 0x00000002;
+	PGSR0 = 0x0158C000;
+	PGSR1 = 0x00FF0080;
+	PGSR2 = 0x0001C004;
+	/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
+	PCFR |= PCFR_OPDE;
+}
+
+MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module")
+	/* MAINTAINER("Jürgen Schindele") */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= TRIZEPS4_SDRAM_BASE + 0x100,
+	.fixup		= trizeps4_fixup,
+	.init_machine	= trizeps4_init,
+	.map_io		= trizeps4_map_io,
+	.init_irq	= pxa_init_irq,
+	.timer		= &pxa_timer,
+MACHINE_END
+