[ARM] 3803/2: S3C24XX: PM split S3C2410 out of core pm

Remove the S3C2410 specific items out of the
core PM code. Add sysdev driver for all the
S3C24XX series that used the S3C2410 PM code.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

7 files changed, 209 insertions, 49 deletions

diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 61a359c..e555bc5 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -133,6 +133,12 @@ config S3C2410_CLOCK
 	help
 	  Clock code for the S3C2410, and similar processors
 
+config S3C2410_PM
+	bool
+	depends on CONFIG_PM
+	help
+	  Power Management code common to S3C2410 and better
+
 config CPU_S3C2410_DMA
 	bool
 	depends on S3C2410_DMA && (CPU_S3C2410 || CPU_S3C2442)
@@ -144,6 +150,7 @@ config CPU_S3C2410
 	bool
 	depends on ARCH_S3C2410
 	select S3C2410_CLOCK
+	select S3C2410_PM
 	help
 	  Support for S3C2410 and S3C2410A family from the S3C24XX line
 	  of Samsung Mobile CPUs.
@@ -172,6 +179,7 @@ config CPU_S3C2440
 	bool
 	depends on ARCH_S3C2410
 	select S3C2410_CLOCK
+	select S3C2410_PM
 	select CPU_S3C244X
 	help
 	  Support for S3C2440 Samsung Mobile CPU based systems.
@@ -180,6 +188,7 @@ config CPU_S3C2442
 	bool
 	depends on ARCH_S3C2420
 	select S3C2410_CLOCK
+	select S3C2410_PM
 	select CPU_S3C244X
 	help
 	  Support for S3C2442 Samsung Mobile CPU based systems.
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index 0d87a9d..758f7e13 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -23,6 +23,8 @@ obj-$(CONFIG_CPU_S3C2400)	+= s3c2400-gpio.o
 obj-$(CONFIG_CPU_S3C2410)	+= s3c2410.o
 obj-$(CONFIG_CPU_S3C2410)	+= s3c2410-gpio.o
 obj-$(CONFIG_CPU_S3C2410)	+= s3c2410-irq.o
+
+obj-$(CONFIG_S3C2410_PM)	+= s3c2410-pm.o s3c2410-sleep.o
 obj-$(CONFIG_CPU_S3C2410_DMA)	+= s3c2410-dma.o
 
 # Power Management support
diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c
index 46dedd3..9402583 100644
--- a/arch/arm/mach-s3c2410/pm.c
+++ b/arch/arm/mach-s3c2410/pm.c
@@ -142,7 +142,7 @@ static struct sleep_save uart_save[] = {
 
 extern void printascii(const char *);
 
-static void pm_dbg(const char *fmt, ...)
+void pm_dbg(const char *fmt, ...)
 {
 	va_list va;
 	char buff[256];
@@ -486,6 +486,9 @@ static void s3c2410_pm_configure_extint(void)
 	}
 }
 
+void (*pm_cpu_prep)(void);
+void (*pm_cpu_sleep)(void);
+
 #define any_allowed(mask, allow) (((mask) & (allow)) != (allow))
 
 /* s3c2410_pm_enter
@@ -496,7 +499,6 @@ static void s3c2410_pm_configure_extint(void)
 static int s3c2410_pm_enter(suspend_state_t state)
 {
 	unsigned long regs_save[16];
-	unsigned long tmp;
 
 	/* ensure the debug is initialised (if enabled) */
 
@@ -504,6 +506,11 @@ static int s3c2410_pm_enter(suspend_state_t state)
 
 	DBG("s3c2410_pm_enter(%d)\n", state);
 
+	if (pm_cpu_prep == NULL || pm_cpu_sleep == NULL) {
+		printk(KERN_ERR PFX "error: no cpu sleep functions set\n");
+		return -EINVAL;
+	}
+
 	if (state != PM_SUSPEND_MEM) {
 		printk(KERN_ERR PFX "error: only PM_SUSPEND_MEM supported\n");
 		return -EINVAL;
@@ -531,13 +538,6 @@ static int s3c2410_pm_enter(suspend_state_t state)
 
 	DBG("s3c2410_sleep_save_phys=0x%08lx\n", s3c2410_sleep_save_phys);
 
-	/* ensure at least GESTATUS3 has the resume address */
-
-	__raw_writel(virt_to_phys(s3c2410_cpu_resume), S3C2410_GSTATUS3);
-
-	DBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3));
-	DBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4));
-
 	/* save all necessary core registers not covered by the drivers */
 
 	s3c2410_pm_do_save(gpio_save, ARRAY_SIZE(gpio_save));
@@ -558,6 +558,10 @@ static int s3c2410_pm_enter(suspend_state_t state)
 
 	__raw_writel(__raw_readl(S3C2410_EINTPEND), S3C2410_EINTPEND);
 
+	/* call cpu specific preperation */
+
+	pm_cpu_prep();
+
 	/* flush cache back to ram */
 
 	flush_cache_all();
@@ -574,19 +578,13 @@ static int s3c2410_pm_enter(suspend_state_t state)
 
 	if (s3c2410_cpu_save(regs_save) == 0) {
 		flush_cache_all();
-		s3c2410_cpu_suspend();
+		pm_cpu_sleep();
 	}
 
 	/* restore the cpu state */
 
 	cpu_init();
 
-	/* unset the return-from-sleep flag, to ensure reset */
-
-	tmp = __raw_readl(S3C2410_GSTATUS2);
-	tmp &= S3C2410_GSTATUS2_OFFRESET;
-	__raw_writel(tmp, S3C2410_GSTATUS2);
-
 	/* restore the system state */
 
 	s3c2410_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
diff --git a/arch/arm/mach-s3c2410/pm.h b/arch/arm/mach-s3c2410/pm.h
index fa8e237..ffe197a 100644
--- a/arch/arm/mach-s3c2410/pm.h
+++ b/arch/arm/mach-s3c2410/pm.h
@@ -34,6 +34,11 @@ extern unsigned long s3c_irqwake_eintmask;
 extern unsigned long s3c_irqwake_intallow;
 extern unsigned long s3c_irqwake_eintallow;
 
+/* per-cpu sleep functions */
+
+extern void (*pm_cpu_prep)(void);
+extern void (*pm_cpu_sleep)(void);
+
 /* Flags for PM Control */
 
 extern unsigned long s3c_pm_flags;
diff --git a/arch/arm/mach-s3c2410/s3c2410-pm.c b/arch/arm/mach-s3c2410/s3c2410-pm.c
new file mode 100644
index 0000000..3080d25
--- /dev/null
+++ b/arch/arm/mach-s3c2410/s3c2410-pm.c
@@ -0,0 +1,111 @@
+/* linux/arch/arm/mach-s3c2410/s3c2410-pm.c
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 (and compatible) Power Manager (Suspend-To-RAM) support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <linux/errno.h>
+#include <linux/time.h>
+#include <linux/sysdev.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+
+#include <asm/arch/regs-gpio.h>
+
+#include "cpu.h"
+#include "pm.h"
+
+#ifdef CONFIG_S3C2410_PM_DEBUG
+extern void pm_dbg(const char *fmt, ...);
+#define DBG(fmt...) pm_dbg(fmt)
+#else
+#define DBG(fmt...) printk(KERN_DEBUG fmt)
+#endif
+
+static void s3c2410_pm_prepare(void)
+{
+	/* ensure at least GSTATUS3 has the resume address */
+
+	__raw_writel(virt_to_phys(s3c2410_cpu_resume), S3C2410_GSTATUS3);
+
+	DBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3));
+	DBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4));
+}
+
+int s3c2410_pm_resume(struct sys_device *dev)
+{
+	unsigned long tmp;
+
+	/* unset the return-from-sleep flag, to ensure reset */
+
+	tmp = __raw_readl(S3C2410_GSTATUS2);
+	tmp &= S3C2410_GSTATUS2_OFFRESET;
+	__raw_writel(tmp, S3C2410_GSTATUS2);
+
+	return 0;
+}
+
+static int s3c2410_pm_add(struct sys_device *dev)
+{
+	pm_cpu_prep = s3c2410_pm_prepare;
+	pm_cpu_sleep = s3c2410_cpu_suspend;
+
+	return 0;
+}
+
+static struct sysdev_driver s3c2410_pm_driver = {
+	.add		= s3c2410_pm_add,
+	.resume		= s3c2410_pm_resume,
+};
+
+/* register ourselves */
+
+static int __init s3c2410_pm_drvinit(void)
+{
+	return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_pm_driver);
+}
+
+arch_initcall(s3c2410_pm_drvinit);
+
+static struct sysdev_driver s3c2440_pm_driver = {
+	.add		= s3c2410_pm_add,
+	.resume		= s3c2410_pm_resume,
+};
+
+static int __init s3c2440_pm_drvinit(void)
+{
+	return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_pm_driver);
+}
+
+arch_initcall(s3c2440_pm_drvinit);
+
+static struct sysdev_driver s3c2442_pm_driver = {
+	.add		= s3c2410_pm_add,
+	.resume		= s3c2410_pm_resume,
+};
+
+static int __init s3c2442_pm_drvinit(void)
+{
+	return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_pm_driver);
+}
+
+arch_initcall(s3c2442_pm_drvinit);
diff --git a/arch/arm/mach-s3c2410/s3c2410-sleep.S b/arch/arm/mach-s3c2410/s3c2410-sleep.S
new file mode 100644
index 0000000..9179a10
--- /dev/null
+++ b/arch/arm/mach-s3c2410/s3c2410-sleep.S
@@ -0,0 +1,68 @@
+/* linux/arch/arm/mach-s3c2410/s3c2410-sleep.S
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 Power Manager (Suspend-To-RAM) support
+ *
+ * Based on PXA/SA1100 sleep code by:
+ *	Nicolas Pitre, (c) 2002 Monta Vista Software Inc
+ *	Cliff Brake, (c) 2001
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/hardware.h>
+#include <asm/arch/map.h>
+
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-clock.h>
+#include <asm/arch/regs-mem.h>
+#include <asm/arch/regs-serial.h>
+
+	/* s3c2410_cpu_suspend
+	 *
+	 * put the cpu into sleep mode
+	*/
+
+ENTRY(s3c2410_cpu_suspend)
+	@@ prepare cpu to sleep
+
+	ldr	r4, =S3C2410_REFRESH
+	ldr	r5, =S3C24XX_MISCCR
+	ldr	r6, =S3C2410_CLKCON
+	ldr	r7, [ r4 ]		@ get REFRESH (and ensure in TLB)
+	ldr	r8, [ r5 ]		@ get MISCCR (and ensure in TLB)
+	ldr	r9, [ r6 ]		@ get CLKCON (and ensure in TLB)
+
+	orr	r7, r7, #S3C2410_REFRESH_SELF	@ SDRAM sleep command
+	orr	r8, r8, #S3C2410_MISCCR_SDSLEEP @ SDRAM power-down signals
+	orr	r9, r9, #S3C2410_CLKCON_POWER	@ power down command
+
+	teq	pc, #0			@ first as a trial-run to load cache
+	bl	s3c2410_do_sleep
+	teq	r0, r0			@ now do it for real
+	b	s3c2410_do_sleep	@
+
+	@@ align next bit of code to cache line
+	.align	8
+s3c2410_do_sleep:
+	streq	r7, [ r4 ]			@ SDRAM sleep command
+	streq	r8, [ r5 ]			@ SDRAM power-down config
+	streq	r9, [ r6 ]			@ CPU sleep
+1:	beq	1b
+	mov	pc, r14
diff --git a/arch/arm/mach-s3c2410/sleep.S b/arch/arm/mach-s3c2410/sleep.S
index e977aa1..2018c2e 100644
--- a/arch/arm/mach-s3c2410/sleep.S
+++ b/arch/arm/mach-s3c2410/sleep.S
@@ -75,39 +75,6 @@ ENTRY(s3c2410_cpu_save)
 	mov	r0, #0
 	ldmfd	sp, { r4 - r12, pc }
 
-	/* s3c2410_cpu_suspend
-	 *
-	 * put the cpu into sleep mode
-	*/
-
-ENTRY(s3c2410_cpu_suspend)
-	@@ prepare cpu to sleep
-
-	ldr	r4, =S3C2410_REFRESH
-	ldr	r5, =S3C24XX_MISCCR
-	ldr	r6, =S3C2410_CLKCON
-	ldr	r7, [ r4 ]		@ get REFRESH (and ensure in TLB)
-	ldr	r8, [ r5 ]		@ get MISCCR (and ensure in TLB)
-	ldr	r9, [ r6 ]		@ get CLKCON (and ensure in TLB)
-
-	orr	r7, r7, #S3C2410_REFRESH_SELF	@ SDRAM sleep command
-	orr	r8, r8, #S3C2410_MISCCR_SDSLEEP @ SDRAM power-down signals
-	orr	r9, r9, #S3C2410_CLKCON_POWER	@ power down command
-
-	teq	pc, #0			@ first as a trial-run to load cache
-	bl	s3c2410_do_sleep
-	teq	r0, r0			@ now do it for real
-	b	s3c2410_do_sleep	@
-
-	@@ align next bit of code to cache line
-	.align	8
-s3c2410_do_sleep:
-	streq	r7, [ r4 ]			@ SDRAM sleep command
-	streq	r8, [ r5 ]			@ SDRAM power-down config
-	streq	r9, [ r6 ]			@ CPU sleep
-1:	beq	1b
-	mov	pc, r14
-
 	@@ return to the caller, after having the MMU
 	@@ turned on, this restores the last bits from the
 	@@ stack