Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

9 files changed, 1319 insertions, 0 deletions

diff --git a/arch/arm/mach-versatile/Kconfig b/arch/arm/mach-versatile/Kconfig
new file mode 100644
index 0000000..8d787f4
--- /dev/null
+++ b/arch/arm/mach-versatile/Kconfig
@@ -0,0 +1,16 @@
+menu "Versatile platform type"
+	depends on ARCH_VERSATILE
+
+config ARCH_VERSATILE_PB
+	bool "Support Versatile/PB platform"
+	default y
+	help
+	  Include support for the ARM(R) Versatile/PB platform.
+
+config MACH_VERSATILE_AB
+	bool "Support Versatile/AB platform"
+	default n
+	help
+	  Include support for the ARM(R) Versatile/AP platform.
+
+endmenu
diff --git a/arch/arm/mach-versatile/Makefile b/arch/arm/mach-versatile/Makefile
new file mode 100644
index 0000000..5d60883
--- /dev/null
+++ b/arch/arm/mach-versatile/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for the linux kernel.
+#
+
+obj-y					:= core.o clock.o
+obj-$(CONFIG_ARCH_VERSATILE_PB)		+= versatile_pb.o
+obj-$(CONFIG_MACH_VERSATILE_AB)		+= versatile_ab.o
diff --git a/arch/arm/mach-versatile/Makefile.boot b/arch/arm/mach-versatile/Makefile.boot
new file mode 100644
index 0000000..c7e75ac
--- /dev/null
+++ b/arch/arm/mach-versatile/Makefile.boot
@@ -0,0 +1,4 @@
+   zreladdr-y	:= 0x00008000
+params_phys-y	:= 0x00000100
+initrd_phys-y	:= 0x00800000
+
diff --git a/arch/arm/mach-versatile/clock.c b/arch/arm/mach-versatile/clock.c
new file mode 100644
index 0000000..48025c2
--- /dev/null
+++ b/arch/arm/mach-versatile/clock.c
@@ -0,0 +1,145 @@
+/*
+ *  linux/arch/arm/mach-versatile/clock.c
+ *
+ *  Copyright (C) 2004 ARM Limited.
+ *  Written by Deep Blue Solutions Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+
+#include <asm/semaphore.h>
+#include <asm/hardware/clock.h>
+#include <asm/hardware/icst307.h>
+
+#include "clock.h"
+
+static LIST_HEAD(clocks);
+static DECLARE_MUTEX(clocks_sem);
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+	struct clk *p, *clk = ERR_PTR(-ENOENT);
+
+	down(&clocks_sem);
+	list_for_each_entry(p, &clocks, node) {
+		if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
+			clk = p;
+			break;
+		}
+	}
+	up(&clocks_sem);
+
+	return clk;
+}
+EXPORT_SYMBOL(clk_get);
+
+void clk_put(struct clk *clk)
+{
+	module_put(clk->owner);
+}
+EXPORT_SYMBOL(clk_put);
+
+int clk_enable(struct clk *clk)
+{
+	return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
+int clk_use(struct clk *clk)
+{
+	return 0;
+}
+EXPORT_SYMBOL(clk_use);
+
+void clk_unuse(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_unuse);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	return rate;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	int ret = -EIO;
+
+	if (clk->setvco) {
+		struct icst307_vco vco;
+
+		vco = icst307_khz_to_vco(clk->params, rate / 1000);
+		clk->rate = icst307_khz(clk->params, vco) * 1000;
+
+		printk("Clock %s: setting VCO reg params: S=%d R=%d V=%d\n",
+			clk->name, vco.s, vco.r, vco.v);
+
+		clk->setvco(clk, vco);
+		ret = 0;
+	}
+	return ret;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+/*
+ * These are fixed clocks.
+ */
+static struct clk kmi_clk = {
+	.name	= "KMIREFCLK",
+	.rate	= 24000000,
+};
+
+static struct clk uart_clk = {
+	.name	= "UARTCLK",
+	.rate	= 24000000,
+};
+
+static struct clk mmci_clk = {
+	.name	= "MCLK",
+	.rate	= 33000000,
+};
+
+int clk_register(struct clk *clk)
+{
+	down(&clocks_sem);
+	list_add(&clk->node, &clocks);
+	up(&clocks_sem);
+	return 0;
+}
+EXPORT_SYMBOL(clk_register);
+
+void clk_unregister(struct clk *clk)
+{
+	down(&clocks_sem);
+	list_del(&clk->node);
+	up(&clocks_sem);
+}
+EXPORT_SYMBOL(clk_unregister);
+
+static int __init clk_init(void)
+{
+	clk_register(&kmi_clk);
+	clk_register(&uart_clk);
+	clk_register(&mmci_clk);
+	return 0;
+}
+arch_initcall(clk_init);
diff --git a/arch/arm/mach-versatile/clock.h b/arch/arm/mach-versatile/clock.h
new file mode 100644
index 0000000..8b0b61d
--- /dev/null
+++ b/arch/arm/mach-versatile/clock.h
@@ -0,0 +1,25 @@
+/*
+ *  linux/arch/arm/mach-versatile/clock.h
+ *
+ *  Copyright (C) 2004 ARM Limited.
+ *  Written by Deep Blue Solutions Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+struct module;
+struct icst307_params;
+
+struct clk {
+	struct list_head	node;
+	unsigned long		rate;
+	struct module		*owner;
+	const char		*name;
+	const struct icst307_params *params;
+	void			*data;
+	void			(*setvco)(struct clk *, struct icst307_vco vco);
+};
+
+int clk_register(struct clk *clk);
+void clk_unregister(struct clk *clk);
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
new file mode 100644
index 0000000..554e1bd
--- /dev/null
+++ b/arch/arm/mach-versatile/core.c
@@ -0,0 +1,918 @@
+/*
+ *  linux/arch/arm/mach-versatile/core.c
+ *
+ *  Copyright (C) 1999 - 2003 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+
+#include <asm/system.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/leds.h>
+#include <asm/mach-types.h>
+#include <asm/hardware/amba.h>
+#include <asm/hardware/amba_clcd.h>
+#include <asm/hardware/icst307.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <asm/mach/mmc.h>
+
+#include "core.h"
+#include "clock.h"
+
+/*
+ * All IO addresses are mapped onto VA 0xFFFx.xxxx, where x.xxxx
+ * is the (PA >> 12).
+ *
+ * Setup a VA for the Versatile Vectored Interrupt Controller.
+ */
+#define VA_VIC_BASE		 IO_ADDRESS(VERSATILE_VIC_BASE)
+#define VA_SIC_BASE		 IO_ADDRESS(VERSATILE_SIC_BASE)
+
+static void vic_mask_irq(unsigned int irq)
+{
+	irq -= IRQ_VIC_START;
+	writel(1 << irq, VA_VIC_BASE + VIC_IRQ_ENABLE_CLEAR);
+}
+
+static void vic_unmask_irq(unsigned int irq)
+{
+	irq -= IRQ_VIC_START;
+	writel(1 << irq, VA_VIC_BASE + VIC_IRQ_ENABLE);
+}
+
+static struct irqchip vic_chip = {
+	.ack	= vic_mask_irq,
+	.mask	= vic_mask_irq,
+	.unmask	= vic_unmask_irq,
+};
+
+static void sic_mask_irq(unsigned int irq)
+{
+	irq -= IRQ_SIC_START;
+	writel(1 << irq, VA_SIC_BASE + SIC_IRQ_ENABLE_CLEAR);
+}
+
+static void sic_unmask_irq(unsigned int irq)
+{
+	irq -= IRQ_SIC_START;
+	writel(1 << irq, VA_SIC_BASE + SIC_IRQ_ENABLE_SET);
+}
+
+static struct irqchip sic_chip = {
+	.ack	= sic_mask_irq,
+	.mask	= sic_mask_irq,
+	.unmask	= sic_unmask_irq,
+};
+
+static void
+sic_handle_irq(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
+{
+	unsigned long status = readl(VA_SIC_BASE + SIC_IRQ_STATUS);
+
+	if (status == 0) {
+		do_bad_IRQ(irq, desc, regs);
+		return;
+	}
+
+	do {
+		irq = ffs(status) - 1;
+		status &= ~(1 << irq);
+
+		irq += IRQ_SIC_START;
+
+		desc = irq_desc + irq;
+		desc->handle(irq, desc, regs);
+	} while (status);
+}
+
+#if 1
+#define IRQ_MMCI0A	IRQ_VICSOURCE22
+#define IRQ_AACI	IRQ_VICSOURCE24
+#define IRQ_ETH		IRQ_VICSOURCE25
+#define PIC_MASK	0xFFD00000
+#else
+#define IRQ_MMCI0A	IRQ_SIC_MMCI0A
+#define IRQ_AACI	IRQ_SIC_AACI
+#define IRQ_ETH		IRQ_SIC_ETH
+#define PIC_MASK	0
+#endif
+
+void __init versatile_init_irq(void)
+{
+	unsigned int i, value;
+
+	/* Disable all interrupts initially. */
+
+	writel(0, VA_VIC_BASE + VIC_INT_SELECT);
+	writel(0, VA_VIC_BASE + VIC_IRQ_ENABLE);
+	writel(~0, VA_VIC_BASE + VIC_IRQ_ENABLE_CLEAR);
+	writel(0, VA_VIC_BASE + VIC_IRQ_STATUS);
+	writel(0, VA_VIC_BASE + VIC_ITCR);
+	writel(~0, VA_VIC_BASE + VIC_IRQ_SOFT_CLEAR);
+
+	/*
+	 * Make sure we clear all existing interrupts
+	 */
+	writel(0, VA_VIC_BASE + VIC_VECT_ADDR);
+	for (i = 0; i < 19; i++) {
+		value = readl(VA_VIC_BASE + VIC_VECT_ADDR);
+		writel(value, VA_VIC_BASE + VIC_VECT_ADDR);
+	}
+
+	for (i = 0; i < 16; i++) {
+		value = readl(VA_VIC_BASE + VIC_VECT_CNTL0 + (i * 4));
+		writel(value | VICVectCntl_Enable | i, VA_VIC_BASE + VIC_VECT_CNTL0 + (i * 4));
+	}
+
+	writel(32, VA_VIC_BASE + VIC_DEF_VECT_ADDR);
+
+	for (i = IRQ_VIC_START; i <= IRQ_VIC_END; i++) {
+		if (i != IRQ_VICSOURCE31) {
+			set_irq_chip(i, &vic_chip);
+			set_irq_handler(i, do_level_IRQ);
+			set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+		}
+	}
+
+	set_irq_handler(IRQ_VICSOURCE31, sic_handle_irq);
+	vic_unmask_irq(IRQ_VICSOURCE31);
+
+	/* Do second interrupt controller */
+	writel(~0, VA_SIC_BASE + SIC_IRQ_ENABLE_CLEAR);
+
+	for (i = IRQ_SIC_START; i <= IRQ_SIC_END; i++) {
+		if ((PIC_MASK & (1 << (i - IRQ_SIC_START))) == 0) {
+			set_irq_chip(i, &sic_chip);
+			set_irq_handler(i, do_level_IRQ);
+			set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+		}
+	}
+
+	/*
+	 * Interrupts on secondary controller from 0 to 8 are routed to
+	 * source 31 on PIC.
+	 * Interrupts from 21 to 31 are routed directly to the VIC on
+	 * the corresponding number on primary controller. This is controlled
+	 * by setting PIC_ENABLEx.
+	 */
+	writel(PIC_MASK, VA_SIC_BASE + SIC_INT_PIC_ENABLE);
+}
+
+static struct map_desc versatile_io_desc[] __initdata = {
+ { IO_ADDRESS(VERSATILE_SYS_BASE),   VERSATILE_SYS_BASE,   SZ_4K,      MT_DEVICE },
+ { IO_ADDRESS(VERSATILE_SIC_BASE),   VERSATILE_SIC_BASE,   SZ_4K,      MT_DEVICE },
+ { IO_ADDRESS(VERSATILE_VIC_BASE),   VERSATILE_VIC_BASE,   SZ_4K,      MT_DEVICE },
+ { IO_ADDRESS(VERSATILE_SCTL_BASE),  VERSATILE_SCTL_BASE,  SZ_4K * 9,  MT_DEVICE },
+#ifdef CONFIG_MACH_VERSATILE_AB
+ { IO_ADDRESS(VERSATILE_GPIO0_BASE), VERSATILE_GPIO0_BASE, SZ_4K,      MT_DEVICE },
+ { IO_ADDRESS(VERSATILE_IB2_BASE),   VERSATILE_IB2_BASE,   SZ_64M,     MT_DEVICE },
+#endif
+#ifdef CONFIG_DEBUG_LL
+ { IO_ADDRESS(VERSATILE_UART0_BASE), VERSATILE_UART0_BASE, SZ_4K,      MT_DEVICE },
+#endif
+#ifdef FIXME
+ { PCI_MEMORY_VADDR,		     PHYS_PCI_MEM_BASE,    SZ_16M,     MT_DEVICE },
+ { PCI_CONFIG_VADDR,		     PHYS_PCI_CONFIG_BASE, SZ_16M,     MT_DEVICE },
+ { PCI_V3_VADDR,		     PHYS_PCI_V3_BASE,     SZ_512K,    MT_DEVICE },
+ { PCI_IO_VADDR,		     PHYS_PCI_IO_BASE,     SZ_64K,     MT_DEVICE },
+#endif
+};
+
+void __init versatile_map_io(void)
+{
+	iotable_init(versatile_io_desc, ARRAY_SIZE(versatile_io_desc));
+}
+
+#define VERSATILE_REFCOUNTER	(IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_24MHz_OFFSET)
+
+/*
+ * This is the Versatile sched_clock implementation.  This has
+ * a resolution of 41.7ns, and a maximum value of about 179s.
+ */
+unsigned long long sched_clock(void)
+{
+	unsigned long long v;
+
+	v = (unsigned long long)readl(VERSATILE_REFCOUNTER) * 125;
+	do_div(v, 3);
+
+	return v;
+}
+
+
+#define VERSATILE_FLASHCTRL    (IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_FLASH_OFFSET)
+
+static int versatile_flash_init(void)
+{
+	u32 val;
+
+	val = __raw_readl(VERSATILE_FLASHCTRL);
+	val &= ~VERSATILE_FLASHPROG_FLVPPEN;
+	__raw_writel(val, VERSATILE_FLASHCTRL);
+
+	return 0;
+}
+
+static void versatile_flash_exit(void)
+{
+	u32 val;
+
+	val = __raw_readl(VERSATILE_FLASHCTRL);
+	val &= ~VERSATILE_FLASHPROG_FLVPPEN;
+	__raw_writel(val, VERSATILE_FLASHCTRL);
+}
+
+static void versatile_flash_set_vpp(int on)
+{
+	u32 val;
+
+	val = __raw_readl(VERSATILE_FLASHCTRL);
+	if (on)
+		val |= VERSATILE_FLASHPROG_FLVPPEN;
+	else
+		val &= ~VERSATILE_FLASHPROG_FLVPPEN;
+	__raw_writel(val, VERSATILE_FLASHCTRL);
+}
+
+static struct flash_platform_data versatile_flash_data = {
+	.map_name		= "cfi_probe",
+	.width			= 4,
+	.init			= versatile_flash_init,
+	.exit			= versatile_flash_exit,
+	.set_vpp		= versatile_flash_set_vpp,
+};
+
+static struct resource versatile_flash_resource = {
+	.start			= VERSATILE_FLASH_BASE,
+	.end			= VERSATILE_FLASH_BASE + VERSATILE_FLASH_SIZE,
+	.flags			= IORESOURCE_MEM,
+};
+
+static struct platform_device versatile_flash_device = {
+	.name			= "armflash",
+	.id			= 0,
+	.dev			= {
+		.platform_data	= &versatile_flash_data,
+	},
+	.num_resources		= 1,
+	.resource		= &versatile_flash_resource,
+};
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.start		= VERSATILE_ETH_BASE,
+		.end		= VERSATILE_ETH_BASE + SZ_64K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= IRQ_ETH,
+		.end		= IRQ_ETH,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+};
+
+#define VERSATILE_SYSMCI	(IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_MCI_OFFSET)
+
+unsigned int mmc_status(struct device *dev)
+{
+	struct amba_device *adev = container_of(dev, struct amba_device, dev);
+	u32 mask;
+
+	if (adev->res.start == VERSATILE_MMCI0_BASE)
+		mask = 1;
+	else
+		mask = 2;
+
+	return readl(VERSATILE_SYSMCI) & mask;
+}
+
+static struct mmc_platform_data mmc0_plat_data = {
+	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.status		= mmc_status,
+};
+
+/*
+ * Clock handling
+ */
+static const struct icst307_params versatile_oscvco_params = {
+	.ref		= 24000,
+	.vco_max	= 200000,
+	.vd_min		= 4 + 8,
+	.vd_max		= 511 + 8,
+	.rd_min		= 1 + 2,
+	.rd_max		= 127 + 2,
+};
+
+static void versatile_oscvco_set(struct clk *clk, struct icst307_vco vco)
+{
+	unsigned long sys_lock = IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_LOCK_OFFSET;
+#if defined(CONFIG_ARCH_VERSATILE_PB)
+	unsigned long sys_osc = IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_OSC4_OFFSET;
+#elif defined(CONFIG_MACH_VERSATILE_AB)
+	unsigned long sys_osc = IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_OSC1_OFFSET;
+#endif
+	u32 val;
+
+	val = readl(sys_osc) & ~0x7ffff;
+	val |= vco.v | (vco.r << 9) | (vco.s << 16);
+
+	writel(0xa05f, sys_lock);
+	writel(val, sys_osc);
+	writel(0, sys_lock);
+}
+
+static struct clk versatile_clcd_clk = {
+	.name	= "CLCDCLK",
+	.params	= &versatile_oscvco_params,
+	.setvco = versatile_oscvco_set,
+};
+
+/*
+ * CLCD support.
+ */
+#define SYS_CLCD_MODE_MASK	(3 << 0)
+#define SYS_CLCD_MODE_888	(0 << 0)
+#define SYS_CLCD_MODE_5551	(1 << 0)
+#define SYS_CLCD_MODE_565_RLSB	(2 << 0)
+#define SYS_CLCD_MODE_565_BLSB	(3 << 0)
+#define SYS_CLCD_NLCDIOON	(1 << 2)
+#define SYS_CLCD_VDDPOSSWITCH	(1 << 3)
+#define SYS_CLCD_PWR3V5SWITCH	(1 << 4)
+#define SYS_CLCD_ID_MASK	(0x1f << 8)
+#define SYS_CLCD_ID_SANYO_3_8	(0x00 << 8)
+#define SYS_CLCD_ID_UNKNOWN_8_4	(0x01 << 8)
+#define SYS_CLCD_ID_EPSON_2_2	(0x02 << 8)
+#define SYS_CLCD_ID_SANYO_2_5	(0x07 << 8)
+#define SYS_CLCD_ID_VGA		(0x1f << 8)
+
+static struct clcd_panel vga = {
+	.mode		= {
+		.name		= "VGA",
+		.refresh	= 60,
+		.xres		= 640,
+		.yres		= 480,
+		.pixclock	= 39721,
+		.left_margin	= 40,
+		.right_margin	= 24,
+		.upper_margin	= 32,
+		.lower_margin	= 11,
+		.hsync_len	= 96,
+		.vsync_len	= 2,
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+	.width		= -1,
+	.height		= -1,
+	.tim2		= TIM2_BCD | TIM2_IPC,
+	.cntl		= CNTL_LCDTFT | CNTL_LCDVCOMP(1),
+	.bpp		= 16,
+};
+
+static struct clcd_panel sanyo_3_8_in = {
+	.mode		= {
+		.name		= "Sanyo QVGA",
+		.refresh	= 116,
+		.xres		= 320,
+		.yres		= 240,
+		.pixclock	= 100000,
+		.left_margin	= 6,
+		.right_margin	= 6,
+		.upper_margin	= 5,
+		.lower_margin	= 5,
+		.hsync_len	= 6,
+		.vsync_len	= 6,
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+	.width		= -1,
+	.height		= -1,
+	.tim2		= TIM2_BCD,
+	.cntl		= CNTL_LCDTFT | CNTL_LCDVCOMP(1),
+	.bpp		= 16,
+};
+
+static struct clcd_panel sanyo_2_5_in = {
+	.mode		= {
+		.name		= "Sanyo QVGA Portrait",
+		.refresh	= 116,
+		.xres		= 240,
+		.yres		= 320,
+		.pixclock	= 100000,
+		.left_margin	= 20,
+		.right_margin	= 10,
+		.upper_margin	= 2,
+		.lower_margin	= 2,
+		.hsync_len	= 10,
+		.vsync_len	= 2,
+		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+	.width		= -1,
+	.height		= -1,
+	.tim2		= TIM2_IVS | TIM2_IHS | TIM2_IPC,
+	.cntl		= CNTL_LCDTFT | CNTL_LCDVCOMP(1),
+	.bpp		= 16,
+};
+
+static struct clcd_panel epson_2_2_in = {
+	.mode		= {
+		.name		= "Epson QCIF",
+		.refresh	= 390,
+		.xres		= 176,
+		.yres		= 220,
+		.pixclock	= 62500,
+		.left_margin	= 3,
+		.right_margin	= 2,
+		.upper_margin	= 1,
+		.lower_margin	= 0,
+		.hsync_len	= 3,
+		.vsync_len	= 2,
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+	.width		= -1,
+	.height		= -1,
+	.tim2		= TIM2_BCD | TIM2_IPC,
+	.cntl		= CNTL_LCDTFT | CNTL_LCDVCOMP(1),
+	.bpp		= 16,
+};
+
+/*
+ * Detect which LCD panel is connected, and return the appropriate
+ * clcd_panel structure.  Note: we do not have any information on
+ * the required timings for the 8.4in panel, so we presently assume
+ * VGA timings.
+ */
+static struct clcd_panel *versatile_clcd_panel(void)
+{
+	unsigned long sys_clcd = IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
+	struct clcd_panel *panel = &vga;
+	u32 val;
+
+	val = readl(sys_clcd) & SYS_CLCD_ID_MASK;
+	if (val == SYS_CLCD_ID_SANYO_3_8)
+		panel = &sanyo_3_8_in;
+	else if (val == SYS_CLCD_ID_SANYO_2_5)
+		panel = &sanyo_2_5_in;
+	else if (val == SYS_CLCD_ID_EPSON_2_2)
+		panel = &epson_2_2_in;
+	else if (val == SYS_CLCD_ID_VGA)
+		panel = &vga;
+	else {
+		printk(KERN_ERR "CLCD: unknown LCD panel ID 0x%08x, using VGA\n",
+			val);
+		panel = &vga;
+	}
+
+	return panel;
+}
+
+/*
+ * Disable all display connectors on the interface module.
+ */
+static void versatile_clcd_disable(struct clcd_fb *fb)
+{
+	unsigned long sys_clcd = IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
+	u32 val;
+
+	val = readl(sys_clcd);
+	val &= ~SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
+	writel(val, sys_clcd);
+
+#ifdef CONFIG_MACH_VERSATILE_AB
+	/*
+	 * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light off
+	 */
+	if (fb->panel == &sanyo_2_5_in) {
+		unsigned long versatile_ib2_ctrl = IO_ADDRESS(VERSATILE_IB2_CTRL);
+		unsigned long ctrl;
+
+		ctrl = readl(versatile_ib2_ctrl);
+		ctrl &= ~0x01;
+		writel(ctrl, versatile_ib2_ctrl);
+	}
+#endif
+}
+
+/*
+ * Enable the relevant connector on the interface module.
+ */
+static void versatile_clcd_enable(struct clcd_fb *fb)
+{
+	unsigned long sys_clcd = IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
+	u32 val;
+
+	val = readl(sys_clcd);
+	val &= ~SYS_CLCD_MODE_MASK;
+
+	switch (fb->fb.var.green.length) {
+	case 5:
+		val |= SYS_CLCD_MODE_5551;
+		break;
+	case 6:
+		val |= SYS_CLCD_MODE_565_BLSB;
+		break;
+	case 8:
+		val |= SYS_CLCD_MODE_888;
+		break;
+	}
+
+	/*
+	 * Set the MUX
+	 */
+	writel(val, sys_clcd);
+
+	/*
+	 * And now enable the PSUs
+	 */
+	val |= SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
+	writel(val, sys_clcd);
+
+#ifdef CONFIG_MACH_VERSATILE_AB
+	/*
+	 * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light on
+	 */
+	if (fb->panel == &sanyo_2_5_in) {
+		unsigned long versatile_ib2_ctrl = IO_ADDRESS(VERSATILE_IB2_CTRL);
+		unsigned long ctrl;
+
+		ctrl = readl(versatile_ib2_ctrl);
+		ctrl |= 0x01;
+		writel(ctrl, versatile_ib2_ctrl);
+	}
+#endif
+}
+
+static unsigned long framesize = SZ_1M;
+
+static int versatile_clcd_setup(struct clcd_fb *fb)
+{
+	dma_addr_t dma;
+
+	fb->panel		= versatile_clcd_panel();
+
+	fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize,
+						    &dma, GFP_KERNEL);
+	if (!fb->fb.screen_base) {
+		printk(KERN_ERR "CLCD: unable to map framebuffer\n");
+		return -ENOMEM;
+	}
+
+	fb->fb.fix.smem_start	= dma;
+	fb->fb.fix.smem_len	= framesize;
+
+	return 0;
+}
+
+static int versatile_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
+{
+	return dma_mmap_writecombine(&fb->dev->dev, vma,
+				     fb->fb.screen_base,
+				     fb->fb.fix.smem_start,
+				     fb->fb.fix.smem_len);
+}
+
+static void versatile_clcd_remove(struct clcd_fb *fb)
+{
+	dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
+			      fb->fb.screen_base, fb->fb.fix.smem_start);
+}
+
+static struct clcd_board clcd_plat_data = {
+	.name		= "Versatile",
+	.check		= clcdfb_check,
+	.decode		= clcdfb_decode,
+	.disable	= versatile_clcd_disable,
+	.enable		= versatile_clcd_enable,
+	.setup		= versatile_clcd_setup,
+	.mmap		= versatile_clcd_mmap,
+	.remove		= versatile_clcd_remove,
+};
+
+#define AACI_IRQ	{ IRQ_AACI, NO_IRQ }
+#define AACI_DMA	{ 0x80, 0x81 }
+#define MMCI0_IRQ	{ IRQ_MMCI0A,IRQ_SIC_MMCI0B }
+#define MMCI0_DMA	{ 0x84, 0 }
+#define KMI0_IRQ	{ IRQ_SIC_KMI0, NO_IRQ }
+#define KMI0_DMA	{ 0, 0 }
+#define KMI1_IRQ	{ IRQ_SIC_KMI1, NO_IRQ }
+#define KMI1_DMA	{ 0, 0 }
+
+/*
+ * These devices are connected directly to the multi-layer AHB switch
+ */
+#define SMC_IRQ		{ NO_IRQ, NO_IRQ }
+#define SMC_DMA		{ 0, 0 }
+#define MPMC_IRQ	{ NO_IRQ, NO_IRQ }
+#define MPMC_DMA	{ 0, 0 }
+#define CLCD_IRQ	{ IRQ_CLCDINT, NO_IRQ }
+#define CLCD_DMA	{ 0, 0 }
+#define DMAC_IRQ	{ IRQ_DMAINT, NO_IRQ }
+#define DMAC_DMA	{ 0, 0 }
+
+/*
+ * These devices are connected via the core APB bridge
+ */
+#define SCTL_IRQ	{ NO_IRQ, NO_IRQ }
+#define SCTL_DMA	{ 0, 0 }
+#define WATCHDOG_IRQ	{ IRQ_WDOGINT, NO_IRQ }
+#define WATCHDOG_DMA	{ 0, 0 }
+#define GPIO0_IRQ	{ IRQ_GPIOINT0, NO_IRQ }
+#define GPIO0_DMA	{ 0, 0 }
+#define GPIO1_IRQ	{ IRQ_GPIOINT1, NO_IRQ }
+#define GPIO1_DMA	{ 0, 0 }
+#define RTC_IRQ		{ IRQ_RTCINT, NO_IRQ }
+#define RTC_DMA		{ 0, 0 }
+
+/*
+ * These devices are connected via the DMA APB bridge
+ */
+#define SCI_IRQ		{ IRQ_SCIINT, NO_IRQ }
+#define SCI_DMA		{ 7, 6 }
+#define UART0_IRQ	{ IRQ_UARTINT0, NO_IRQ }
+#define UART0_DMA	{ 15, 14 }
+#define UART1_IRQ	{ IRQ_UARTINT1, NO_IRQ }
+#define UART1_DMA	{ 13, 12 }
+#define UART2_IRQ	{ IRQ_UARTINT2, NO_IRQ }
+#define UART2_DMA	{ 11, 10 }
+#define SSP_IRQ		{ IRQ_SSPINT, NO_IRQ }
+#define SSP_DMA		{ 9, 8 }
+
+/* FPGA Primecells */
+AMBA_DEVICE(aaci,  "fpga:04", AACI,     NULL);
+AMBA_DEVICE(mmc0,  "fpga:05", MMCI0,    &mmc0_plat_data);
+AMBA_DEVICE(kmi0,  "fpga:06", KMI0,     NULL);
+AMBA_DEVICE(kmi1,  "fpga:07", KMI1,     NULL);
+
+/* DevChip Primecells */
+AMBA_DEVICE(smc,   "dev:00",  SMC,      NULL);
+AMBA_DEVICE(mpmc,  "dev:10",  MPMC,     NULL);
+AMBA_DEVICE(clcd,  "dev:20",  CLCD,     &clcd_plat_data);
+AMBA_DEVICE(dmac,  "dev:30",  DMAC,     NULL);
+AMBA_DEVICE(sctl,  "dev:e0",  SCTL,     NULL);
+AMBA_DEVICE(wdog,  "dev:e1",  WATCHDOG, NULL);
+AMBA_DEVICE(gpio0, "dev:e4",  GPIO0,    NULL);
+AMBA_DEVICE(gpio1, "dev:e5",  GPIO1,    NULL);
+AMBA_DEVICE(rtc,   "dev:e8",  RTC,      NULL);
+AMBA_DEVICE(sci0,  "dev:f0",  SCI,      NULL);
+AMBA_DEVICE(uart0, "dev:f1",  UART0,    NULL);
+AMBA_DEVICE(uart1, "dev:f2",  UART1,    NULL);
+AMBA_DEVICE(uart2, "dev:f3",  UART2,    NULL);
+AMBA_DEVICE(ssp0,  "dev:f4",  SSP,      NULL);
+
+static struct amba_device *amba_devs[] __initdata = {
+	&dmac_device,
+	&uart0_device,
+	&uart1_device,
+	&uart2_device,
+	&smc_device,
+	&mpmc_device,
+	&clcd_device,
+	&sctl_device,
+	&wdog_device,
+	&gpio0_device,
+	&gpio1_device,
+	&rtc_device,
+	&sci0_device,
+	&ssp0_device,
+	&aaci_device,
+	&mmc0_device,
+	&kmi0_device,
+	&kmi1_device,
+};
+
+#ifdef CONFIG_LEDS
+#define VA_LEDS_BASE (IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_LED_OFFSET)
+
+static void versatile_leds_event(led_event_t ledevt)
+{
+	unsigned long flags;
+	u32 val;
+
+	local_irq_save(flags);
+	val = readl(VA_LEDS_BASE);
+
+	switch (ledevt) {
+	case led_idle_start:
+		val = val & ~VERSATILE_SYS_LED0;
+		break;
+
+	case led_idle_end:
+		val = val | VERSATILE_SYS_LED0;
+		break;
+
+	case led_timer:
+		val = val ^ VERSATILE_SYS_LED1;
+		break;
+
+	case led_halted:
+		val = 0;
+		break;
+
+	default:
+		break;
+	}
+
+	writel(val, VA_LEDS_BASE);
+	local_irq_restore(flags);
+}
+#endif	/* CONFIG_LEDS */
+
+void __init versatile_init(void)
+{
+	int i;
+
+	clk_register(&versatile_clcd_clk);
+
+	platform_device_register(&versatile_flash_device);
+	platform_device_register(&smc91x_device);
+
+	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+		struct amba_device *d = amba_devs[i];
+		amba_device_register(d, &iomem_resource);
+	}
+
+#ifdef CONFIG_LEDS
+	leds_event = versatile_leds_event;
+#endif
+}
+
+/*
+ * Where is the timer (VA)?
+ */
+#define TIMER0_VA_BASE		 IO_ADDRESS(VERSATILE_TIMER0_1_BASE)
+#define TIMER1_VA_BASE		(IO_ADDRESS(VERSATILE_TIMER0_1_BASE) + 0x20)
+#define TIMER2_VA_BASE		 IO_ADDRESS(VERSATILE_TIMER2_3_BASE)
+#define TIMER3_VA_BASE		(IO_ADDRESS(VERSATILE_TIMER2_3_BASE) + 0x20)
+#define VA_IC_BASE		 IO_ADDRESS(VERSATILE_VIC_BASE) 
+
+/*
+ * How long is the timer interval?
+ */
+#define TIMER_INTERVAL	(TICKS_PER_uSEC * mSEC_10)
+#if TIMER_INTERVAL >= 0x100000
+#define TIMER_RELOAD	(TIMER_INTERVAL >> 8)		/* Divide by 256 */
+#define TIMER_CTRL	0x88				/* Enable, Clock / 256 */
+#define TICKS2USECS(x)	(256 * (x) / TICKS_PER_uSEC)
+#elif TIMER_INTERVAL >= 0x10000
+#define TIMER_RELOAD	(TIMER_INTERVAL >> 4)		/* Divide by 16 */
+#define TIMER_CTRL	0x84				/* Enable, Clock / 16 */
+#define TICKS2USECS(x)	(16 * (x) / TICKS_PER_uSEC)
+#else
+#define TIMER_RELOAD	(TIMER_INTERVAL)
+#define TIMER_CTRL	0x80				/* Enable */
+#define TICKS2USECS(x)	((x) / TICKS_PER_uSEC)
+#endif
+
+#define TIMER_CTRL_IE	(1 << 5)	/* Interrupt Enable */
+
+/*
+ * What does it look like?
+ */
+typedef struct TimerStruct {
+	unsigned long TimerLoad;
+	unsigned long TimerValue;
+	unsigned long TimerControl;
+	unsigned long TimerClear;
+} TimerStruct_t;
+
+/*
+ * Returns number of ms since last clock interrupt.  Note that interrupts
+ * will have been disabled by do_gettimeoffset()
+ */
+static unsigned long versatile_gettimeoffset(void)
+{
+	volatile TimerStruct_t *timer0 = (TimerStruct_t *)TIMER0_VA_BASE;
+	unsigned long ticks1, ticks2, status;
+
+	/*
+	 * Get the current number of ticks.  Note that there is a race
+	 * condition between us reading the timer and checking for
+	 * an interrupt.  We get around this by ensuring that the
+	 * counter has not reloaded between our two reads.
+	 */
+	ticks2 = timer0->TimerValue & 0xffff;
+	do {
+		ticks1 = ticks2;
+		status = __raw_readl(VA_IC_BASE + VIC_IRQ_RAW_STATUS);
+		ticks2 = timer0->TimerValue & 0xffff;
+	} while (ticks2 > ticks1);
+
+	/*
+	 * Number of ticks since last interrupt.
+	 */
+	ticks1 = TIMER_RELOAD - ticks2;
+
+	/*
+	 * Interrupt pending?  If so, we've reloaded once already.
+	 *
+	 * FIXME: Need to check this is effectively timer 0 that expires
+	 */
+	if (status & IRQMASK_TIMERINT0_1)
+		ticks1 += TIMER_RELOAD;
+
+	/*
+	 * Convert the ticks to usecs
+	 */
+	return TICKS2USECS(ticks1);
+}
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t versatile_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	volatile TimerStruct_t *timer0 = (volatile TimerStruct_t *)TIMER0_VA_BASE;
+
+	write_seqlock(&xtime_lock);
+
+	// ...clear the interrupt
+	timer0->TimerClear = 1;
+
+	timer_tick(regs);
+
+	write_sequnlock(&xtime_lock);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction versatile_timer_irq = {
+	.name		= "Versatile Timer Tick",
+	.flags		= SA_INTERRUPT,
+	.handler	= versatile_timer_interrupt
+};
+
+/*
+ * Set up timer interrupt, and return the current time in seconds.
+ */
+static void __init versatile_timer_init(void)
+{
+	volatile TimerStruct_t *timer0 = (volatile TimerStruct_t *)TIMER0_VA_BASE;
+	volatile TimerStruct_t *timer1 = (volatile TimerStruct_t *)TIMER1_VA_BASE;
+	volatile TimerStruct_t *timer2 = (volatile TimerStruct_t *)TIMER2_VA_BASE;
+	volatile TimerStruct_t *timer3 = (volatile TimerStruct_t *)TIMER3_VA_BASE;
+
+	/* 
+	 * set clock frequency: 
+	 *	VERSATILE_REFCLK is 32KHz
+	 *	VERSATILE_TIMCLK is 1MHz
+	 */
+	*(volatile unsigned int *)IO_ADDRESS(VERSATILE_SCTL_BASE) |= 
+	  ((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) | (VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) | 
+	   (VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) | (VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel));
+
+	/*
+	 * Initialise to a known state (all timers off)
+	 */
+	timer0->TimerControl = 0;
+	timer1->TimerControl = 0;
+	timer2->TimerControl = 0;
+	timer3->TimerControl = 0;
+
+	timer0->TimerLoad    = TIMER_RELOAD;
+	timer0->TimerValue   = TIMER_RELOAD;
+	timer0->TimerControl = TIMER_CTRL | 0x40 | TIMER_CTRL_IE;  /* periodic + IE */
+
+	/* 
+	 * Make irqs happen for the system timer
+	 */
+	setup_irq(IRQ_TIMERINT0_1, &versatile_timer_irq);
+}
+
+struct sys_timer versatile_timer = {
+	.init		= versatile_timer_init,
+	.offset		= versatile_gettimeoffset,
+};
diff --git a/arch/arm/mach-versatile/core.h b/arch/arm/mach-versatile/core.h
new file mode 100644
index 0000000..588c206
--- /dev/null
+++ b/arch/arm/mach-versatile/core.h
@@ -0,0 +1,50 @@
+/*
+ *  linux/arch/arm/mach-versatile/core.h
+ *
+ *  Copyright (C) 2004 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_VERSATILE_H
+#define __ASM_ARCH_VERSATILE_H
+
+#include <asm/hardware/amba.h>
+
+extern void __init versatile_init(void);
+extern void __init versatile_init_irq(void);
+extern void __init versatile_map_io(void);
+extern struct sys_timer versatile_timer;
+extern unsigned int mmc_status(struct device *dev);
+
+#define AMBA_DEVICE(name,busid,base,plat)			\
+static struct amba_device name##_device = {			\
+	.dev		= {					\
+		.coherent_dma_mask = ~0,			\
+		.bus_id	= busid,				\
+		.platform_data = plat,				\
+	},							\
+	.res		= {					\
+		.start	= VERSATILE_##base##_BASE,		\
+		.end	= (VERSATILE_##base##_BASE) + SZ_4K - 1,\
+		.flags	= IORESOURCE_MEM,			\
+	},							\
+	.dma_mask	= ~0,					\
+	.irq		= base##_IRQ,				\
+	/* .dma		= base##_DMA,*/				\
+}
+
+#endif
diff --git a/arch/arm/mach-versatile/versatile_ab.c b/arch/arm/mach-versatile/versatile_ab.c
new file mode 100644
index 0000000..d332084
--- /dev/null
+++ b/arch/arm/mach-versatile/versatile_ab.c
@@ -0,0 +1,45 @@
+/*
+ *  linux/arch/arm/mach-versatile/versatile_ab.c
+ *
+ *  Copyright (C) 2004 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/sysdev.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+#include <asm/hardware/amba.h>
+
+#include <asm/mach/arch.h>
+
+#include "core.h"
+
+MACHINE_START(VERSATILE_AB, "ARM-Versatile AB")
+	MAINTAINER("ARM Ltd/Deep Blue Solutions Ltd")
+	BOOT_MEM(0x00000000, 0x101f1000, 0xf11f1000)
+	BOOT_PARAMS(0x00000100)
+	MAPIO(versatile_map_io)
+	INITIRQ(versatile_init_irq)
+	.timer		= &versatile_timer,
+	INIT_MACHINE(versatile_init)
+MACHINE_END
diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c
new file mode 100644
index 0000000..2702099
--- /dev/null
+++ b/arch/arm/mach-versatile/versatile_pb.c
@@ -0,0 +1,109 @@
+/*
+ *  linux/arch/arm/mach-versatile/versatile_pb.c
+ *
+ *  Copyright (C) 2004 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/sysdev.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+#include <asm/hardware/amba.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/mmc.h>
+
+#include "core.h"
+
+#if 1
+#define IRQ_MMCI1A	IRQ_VICSOURCE23
+#else
+#define IRQ_MMCI1A	IRQ_SIC_MMCI1A
+#endif
+
+static struct mmc_platform_data mmc1_plat_data = {
+	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.status		= mmc_status,
+};
+
+#define UART3_IRQ	{ IRQ_SIC_UART3, NO_IRQ }
+#define UART3_DMA	{ 0x86, 0x87 }
+#define SCI1_IRQ	{ IRQ_SIC_SCI3, NO_IRQ }
+#define SCI1_DMA	{ 0x88, 0x89 }
+#define MMCI1_IRQ	{ IRQ_MMCI1A, IRQ_SIC_MMCI1B }
+#define MMCI1_DMA	{ 0x85, 0 }
+
+/*
+ * These devices are connected via the core APB bridge
+ */
+#define GPIO2_IRQ	{ IRQ_GPIOINT2, NO_IRQ }
+#define GPIO2_DMA	{ 0, 0 }
+#define GPIO3_IRQ	{ IRQ_GPIOINT3, NO_IRQ }
+#define GPIO3_DMA	{ 0, 0 }
+
+/*
+ * These devices are connected via the DMA APB bridge
+ */
+
+/* FPGA Primecells */
+AMBA_DEVICE(uart3, "fpga:09", UART3,    NULL);
+AMBA_DEVICE(sci1,  "fpga:0a", SCI1,     NULL);
+AMBA_DEVICE(mmc1,  "fpga:0b", MMCI1,    &mmc1_plat_data);
+
+/* DevChip Primecells */
+AMBA_DEVICE(gpio2, "dev:e6",  GPIO2,    NULL);
+AMBA_DEVICE(gpio3, "dev:e7",  GPIO3,    NULL);
+
+static struct amba_device *amba_devs[] __initdata = {
+	&uart3_device,
+	&gpio2_device,
+	&gpio3_device,
+	&sci1_device,
+	&mmc1_device,
+};
+
+static int __init versatile_pb_init(void)
+{
+	int i;
+
+	if (machine_is_versatile_pb()) {
+		for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+			struct amba_device *d = amba_devs[i];
+			amba_device_register(d, &iomem_resource);
+		}
+	}
+
+	return 0;
+}
+
+arch_initcall(versatile_pb_init);
+
+MACHINE_START(VERSATILE_PB, "ARM-Versatile PB")
+	MAINTAINER("ARM Ltd/Deep Blue Solutions Ltd")
+	BOOT_MEM(0x00000000, 0x101f1000, 0xf11f1000)
+	BOOT_PARAMS(0x00000100)
+	MAPIO(versatile_map_io)
+	INITIRQ(versatile_init_irq)
+	.timer		= &versatile_timer,
+	INIT_MACHINE(versatile_init)
+MACHINE_END