m68k: merge m68k and m68knommu arch directories

There is a lot of common code that could be shared between the m68k
and m68knommu arch branches. It makes sense to merge the two branches
into a single directory structure so that we can more easily share
that common code.

This is a brute force merge, based on a script from Stephen King
<sfking@fdwdc.com>, which was originally written by Arnd Bergmann
<arnd@arndb.de>.

> The script was inspired by the script Sam Ravnborg used to merge the
> includes from m68knommu. For those files common to both arches but
> differing in content, the m68k version of the file is renamed to
> <file>_mm.<ext> and the m68knommu version of the file is moved into the
> corresponding m68k directory and renamed <file>_no.<ext> and a small
> wrapper file <file>.<ext> is used to select between the two version. Files
> that are common to both but don't differ are removed from the m68knommu
> tree and files and directories that are unique to the m68knommu tree are
> moved to the m68k tree. Finally, the arch/m68knommu tree is removed.
>
> To select between the the versions of the files, the wrapper uses
>
> #ifdef CONFIG_MMU
> #include <file>_mm.<ext>
> #else
> #include <file>_no.<ext>
> #endif

On top of this file merge I have done a simplistic merge of m68k and
m68knommu Kconfig, which primarily attempts to keep existing options and
menus in place. Other than a handful of options being moved it produces
identical .config outputs on m68k and m68knommu targets I tested it on.

With this in place there is now quite a bit of scope for merge cleanups
in future patches.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>

4 files changed, 369 insertions, 0 deletions

diff --git a/arch/m68k/platform/5307/Makefile b/arch/m68k/platform/5307/Makefile
new file mode 100644
index 0000000..d4293b7
--- /dev/null
+++ b/arch/m68k/platform/5307/Makefile
@@ -0,0 +1,20 @@
+#
+# Makefile for the m68knommu kernel.
+#
+
+#
+# If you want to play with the HW breakpoints then you will
+# need to add define this,  which will give you a stack backtrace
+# on the console port whenever a DBG interrupt occurs. You have to
+# set up you HW breakpoints to trigger a DBG interrupt:
+#
+# ccflags-y := -DTRAP_DBG_INTERRUPT
+# asflags-y := -DTRAP_DBG_INTERRUPT
+#
+
+asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
+
+obj-y			+= config.o gpio.o
+obj-$(CONFIG_NETtel)	+= nettel.o
+obj-$(CONFIG_CLEOPATRA)	+= nettel.o
+
diff --git a/arch/m68k/platform/5307/config.c b/arch/m68k/platform/5307/config.c
new file mode 100644
index 0000000..00900ac
--- /dev/null
+++ b/arch/m68k/platform/5307/config.c
@@ -0,0 +1,147 @@
+/***************************************************************************/
+
+/*
+ *	linux/arch/m68knommu/platform/5307/config.c
+ *
+ *	Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
+ *	Copyright (C) 2000, Lineo (www.lineo.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfuart.h>
+#include <asm/mcfwdebug.h>
+
+/***************************************************************************/
+
+/*
+ *	Some platforms need software versions of the GPIO data registers.
+ */
+unsigned short ppdata;
+unsigned char ledbank = 0xff;
+
+/***************************************************************************/
+
+static struct mcf_platform_uart m5307_uart_platform[] = {
+	{
+		.mapbase	= MCF_MBAR + MCFUART_BASE1,
+		.irq		= 73,
+	},
+	{
+		.mapbase 	= MCF_MBAR + MCFUART_BASE2,
+		.irq		= 74,
+	},
+	{ },
+};
+
+static struct platform_device m5307_uart = {
+	.name			= "mcfuart",
+	.id			= 0,
+	.dev.platform_data	= m5307_uart_platform,
+};
+
+static struct platform_device *m5307_devices[] __initdata = {
+	&m5307_uart,
+};
+
+/***************************************************************************/
+
+static void __init m5307_uart_init_line(int line, int irq)
+{
+	if (line == 0) {
+		writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR);
+		writeb(irq, MCF_MBAR + MCFUART_BASE1 + MCFUART_UIVR);
+		mcf_mapirq2imr(irq, MCFINTC_UART0);
+	} else if (line == 1) {
+		writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR);
+		writeb(irq, MCF_MBAR + MCFUART_BASE2 + MCFUART_UIVR);
+		mcf_mapirq2imr(irq, MCFINTC_UART1);
+	}
+}
+
+static void __init m5307_uarts_init(void)
+{
+	const int nrlines = ARRAY_SIZE(m5307_uart_platform);
+	int line;
+
+	for (line = 0; (line < nrlines); line++)
+		m5307_uart_init_line(line, m5307_uart_platform[line].irq);
+}
+
+/***************************************************************************/
+
+static void __init m5307_timers_init(void)
+{
+	/* Timer1 is always used as system timer */
+	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3,
+		MCF_MBAR + MCFSIM_TIMER1ICR);
+	mcf_mapirq2imr(MCF_IRQ_TIMER, MCFINTC_TIMER1);
+
+#ifdef CONFIG_HIGHPROFILE
+	/* Timer2 is to be used as a high speed profile timer  */
+	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3,
+		MCF_MBAR + MCFSIM_TIMER2ICR);
+	mcf_mapirq2imr(MCF_IRQ_PROFILER, MCFINTC_TIMER2);
+#endif
+}
+
+/***************************************************************************/
+
+void m5307_cpu_reset(void)
+{
+	local_irq_disable();
+	/* Set watchdog to soft reset, and enabled */
+	__raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR);
+	for (;;)
+		/* wait for watchdog to timeout */;
+}
+
+/***************************************************************************/
+
+void __init config_BSP(char *commandp, int size)
+{
+#if defined(CONFIG_NETtel) || \
+    defined(CONFIG_SECUREEDGEMP3) || defined(CONFIG_CLEOPATRA)
+	/* Copy command line from FLASH to local buffer... */
+	memcpy(commandp, (char *) 0xf0004000, size);
+	commandp[size-1] = 0;
+#endif
+
+	mach_reset = m5307_cpu_reset;
+	m5307_timers_init();
+	m5307_uarts_init();
+
+	/* Only support the external interrupts on their primary level */
+	mcf_mapirq2imr(25, MCFINTC_EINT1);
+	mcf_mapirq2imr(27, MCFINTC_EINT3);
+	mcf_mapirq2imr(29, MCFINTC_EINT5);
+	mcf_mapirq2imr(31, MCFINTC_EINT7);
+
+#ifdef CONFIG_BDM_DISABLE
+	/*
+	 * Disable the BDM clocking.  This also turns off most of the rest of
+	 * the BDM device.  This is good for EMC reasons. This option is not
+	 * incompatible with the memory protection option.
+	 */
+	wdebug(MCFDEBUG_CSR, MCFDEBUG_CSR_PSTCLK);
+#endif
+}
+
+/***************************************************************************/
+
+static int __init init_BSP(void)
+{
+	platform_add_devices(m5307_devices, ARRAY_SIZE(m5307_devices));
+	return 0;
+}
+
+arch_initcall(init_BSP);
+
+/***************************************************************************/
diff --git a/arch/m68k/platform/5307/gpio.c b/arch/m68k/platform/5307/gpio.c
new file mode 100644
index 0000000..5850612
--- /dev/null
+++ b/arch/m68k/platform/5307/gpio.c
@@ -0,0 +1,49 @@
+/*
+ * Coldfire generic GPIO support
+ *
+ * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfgpio.h>
+
+static struct mcf_gpio_chip mcf_gpio_chips[] = {
+	{
+		.gpio_chip			= {
+			.label			= "PP",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value,
+			.ngpio			= 16,
+		},
+		.pddr				= (void __iomem *) MCFSIM_PADDR,
+		.podr				= (void __iomem *) MCFSIM_PADAT,
+		.ppdr				= (void __iomem *) MCFSIM_PADAT,
+	},
+};
+
+static int __init mcf_gpio_init(void)
+{
+	unsigned i = 0;
+	while (i < ARRAY_SIZE(mcf_gpio_chips))
+		(void)gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]);
+	return 0;
+}
+
+core_initcall(mcf_gpio_init);
diff --git a/arch/m68k/platform/5307/nettel.c b/arch/m68k/platform/5307/nettel.c
new file mode 100644
index 0000000..e925ea4
--- /dev/null
+++ b/arch/m68k/platform/5307/nettel.c
@@ -0,0 +1,153 @@
+/***************************************************************************/
+
+/*
+ *	nettel.c -- startup code support for the NETtel boards
+ *
+ *	Copyright (C) 2009, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/nettel.h>
+
+/***************************************************************************/
+
+/*
+ * Define the IO and interrupt resources of the 2 SMC9196 interfaces.
+ */
+#define	NETTEL_SMC0_ADDR	0x30600300
+#define	NETTEL_SMC0_IRQ		29
+
+#define	NETTEL_SMC1_ADDR	0x30600000
+#define	NETTEL_SMC1_IRQ		27
+
+/*
+ * We need some access into the SMC9196 registers. Define those registers
+ * we will need here (including the smc91x.h doesn't seem to give us these
+ * in a simple form).
+ */
+#define	SMC91xx_BANKSELECT	14
+#define	SMC91xx_BASEADDR	2
+#define	SMC91xx_BASEMAC		4
+
+/***************************************************************************/
+
+static struct resource nettel_smc91x_0_resources[] = {
+	{
+		.start		= NETTEL_SMC0_ADDR,
+		.end		= NETTEL_SMC0_ADDR + 0x20,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= NETTEL_SMC0_IRQ,
+		.end		= NETTEL_SMC0_IRQ,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource nettel_smc91x_1_resources[] = {
+	{
+		.start		= NETTEL_SMC1_ADDR,
+		.end		= NETTEL_SMC1_ADDR + 0x20,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= NETTEL_SMC1_IRQ,
+		.end		= NETTEL_SMC1_IRQ,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device nettel_smc91x[] = {
+	{
+		.name			= "smc91x",
+		.id			= 0,
+		.num_resources		= ARRAY_SIZE(nettel_smc91x_0_resources),
+		.resource		= nettel_smc91x_0_resources,
+	},
+	{
+		.name			= "smc91x",
+		.id			= 1,
+		.num_resources		= ARRAY_SIZE(nettel_smc91x_1_resources),
+		.resource		= nettel_smc91x_1_resources,
+	},
+};
+
+static struct platform_device *nettel_devices[] __initdata = {
+	&nettel_smc91x[0],
+	&nettel_smc91x[1],
+};
+
+/***************************************************************************/
+
+static u8 nettel_macdefault[] __initdata = {
+	0x00, 0xd0, 0xcf, 0x00, 0x00, 0x01,
+};
+
+/*
+ * Set flash contained MAC address into SMC9196 core. Make sure the flash
+ * MAC address is sane, and not an empty flash. If no good use the Moreton
+ * Bay default MAC address instead.
+ */
+
+static void __init nettel_smc91x_setmac(unsigned int ioaddr, unsigned int flashaddr)
+{
+	u16 *macp;
+
+	macp = (u16 *) flashaddr;
+	if ((macp[0] == 0xffff) && (macp[1] == 0xffff) && (macp[2] == 0xffff))
+		macp = (u16 *) &nettel_macdefault[0];
+
+	writew(1, NETTEL_SMC0_ADDR + SMC91xx_BANKSELECT);
+	writew(macp[0], ioaddr + SMC91xx_BASEMAC);
+	writew(macp[1], ioaddr + SMC91xx_BASEMAC + 2);
+	writew(macp[2], ioaddr + SMC91xx_BASEMAC + 4);
+}
+
+/***************************************************************************/
+
+/*
+ * Re-map the address space of at least one of the SMC ethernet
+ * parts. Both parts power up decoding the same address, so we
+ * need to move one of them first, before doing anything else.
+ */
+
+static void __init nettel_smc91x_init(void)
+{
+	writew(0x00ec, MCF_MBAR + MCFSIM_PADDR);
+	mcf_setppdata(0, 0x0080);
+	writew(1, NETTEL_SMC0_ADDR + SMC91xx_BANKSELECT);
+	writew(0x0067, NETTEL_SMC0_ADDR + SMC91xx_BASEADDR);
+	mcf_setppdata(0x0080, 0);
+
+	/* Set correct chip select timing for SMC9196 accesses */
+	writew(0x1180, MCF_MBAR + MCFSIM_CSCR3);
+
+	/* Set the SMC interrupts to be auto-vectored */
+	mcf_autovector(NETTEL_SMC0_IRQ);
+	mcf_autovector(NETTEL_SMC1_IRQ);
+
+	/* Set MAC addresses from flash for both interfaces */
+	nettel_smc91x_setmac(NETTEL_SMC0_ADDR, 0xf0006000);
+	nettel_smc91x_setmac(NETTEL_SMC1_ADDR, 0xf0006006);
+}
+
+/***************************************************************************/
+
+static int __init init_nettel(void)
+{
+	nettel_smc91x_init();
+	platform_add_devices(nettel_devices, ARRAY_SIZE(nettel_devices));
+	return 0;
+}
+
+arch_initcall(init_nettel);
+
+/***************************************************************************/