aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/macintosh/Kconfig
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/macintosh/Kconfig
downloadkernel_samsung_espresso10-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip
kernel_samsung_espresso10-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz
kernel_samsung_espresso10-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.bz2
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/macintosh/Kconfig')
-rw-r--r--drivers/macintosh/Kconfig198
1 files changed, 198 insertions, 0 deletions
diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig
new file mode 100644
index 0000000..8a7117a
--- /dev/null
+++ b/drivers/macintosh/Kconfig
@@ -0,0 +1,198 @@
+
+menu "Macintosh device drivers"
+ depends on PPC || MAC
+
+config ADB
+ bool "Apple Desktop Bus (ADB) support"
+ depends on MAC || PPC_PMAC
+ help
+ Apple Desktop Bus (ADB) support is for support of devices which
+ are connected to an ADB port. ADB devices tend to have 4 pins.
+ If you have an Apple Macintosh prior to the iMac, an iBook or
+ PowerBook, or a "Blue and White G3", you probably want to say Y
+ here. Otherwise say N.
+
+config ADB_MACII
+ bool "Include Mac II ADB driver"
+ depends on ADB && MAC
+ help
+ Say Y here if want your kernel to support Macintosh systems that use
+ the Mac II style ADB. This includes the II, IIx, IIcx, SE/30, IIci,
+ Quadra 610, Quadra 650, Quadra 700, Quadra 800, Centris 610 and
+ Centris 650.
+
+config ADB_MACIISI
+ bool "Include Mac IIsi ADB driver"
+ depends on ADB && MAC
+ help
+ Say Y here if want your kernel to support Macintosh systems that use
+ the Mac IIsi style ADB. This includes the IIsi, IIvi, IIvx, Classic
+ II, LC, LC II, LC III, Performa 460, and the Performa 600.
+
+config ADB_IOP
+ bool "Include IOP (IIfx/Quadra 9x0) ADB driver"
+ depends on ADB && MAC
+ help
+ The I/O Processor (IOP) is an Apple custom IC designed to provide
+ intelligent support for I/O controllers. It is described at
+ <http://www.angelfire.com/ca2/dev68k/iopdesc.html> to enable direct
+ support for it, say 'Y' here.
+
+config ADB_PMU68K
+ bool "Include PMU (Powerbook) ADB driver"
+ depends on ADB && MAC
+ help
+ Say Y here if want your kernel to support the m68k based Powerbooks.
+ This includes the PowerBook 140, PowerBook 145, PowerBook 150,
+ PowerBook 160, PowerBook 165, PowerBook 165c, PowerBook 170,
+ PowerBook 180, PowerBook, 180c, PowerBook 190cs, PowerBook 520,
+ PowerBook Duo 210, PowerBook Duo 230, PowerBook Duo 250,
+ PowerBook Duo 270c, PowerBook Duo 280 and PowerBook Duo 280c.
+
+# we want to change this to something like CONFIG_SYSCTRL_CUDA/PMU
+config ADB_CUDA
+ bool "Support for CUDA based Macs and PowerMacs"
+ depends on (ADB || PPC_PMAC) && !PPC_PMAC64
+ help
+ This provides support for CUDA based Macintosh and Power Macintosh
+ systems. This includes many m68k based Macs (Color Classic, Mac TV,
+ Performa 475, Performa 520, Performa 550, Performa 575,
+ Performa 588, Quadra 605, Quadra 630, Quadra/Centris 660AV, and
+ Quadra 840AV), most OldWorld PowerMacs, the first generation iMacs,
+ the Blue&White G3 and the "Yikes" G4 (PCI Graphics). All later
+ models should use CONFIG_ADB_PMU instead. It is safe to say Y here
+ even if your machine doesn't have a CUDA.
+
+ If unsure say Y.
+
+config ADB_PMU
+ bool "Support for PMU based PowerMacs"
+ depends on PPC_PMAC
+ help
+ On PowerBooks, iBooks, and recent iMacs and Power Macintoshes, the
+ PMU is an embedded microprocessor whose primary function is to
+ control system power, and battery charging on the portable models.
+ The PMU also controls the ADB (Apple Desktop Bus) which connects to
+ the keyboard and mouse on some machines, as well as the non-volatile
+ RAM and the RTC (real time clock) chip. Say Y to enable support for
+ this device; you should do so if your machine is one of those
+ mentioned above.
+
+config PMAC_SMU
+ bool "Support for SMU based PowerMacs"
+ depends on PPC_PMAC64
+ help
+ This option adds support for the newer G5 iMacs and PowerMacs based
+ on the "SMU" system control chip which replaces the old PMU.
+ If you don't know, say Y.
+
+config PMAC_PBOOK
+ bool "Power management support for PowerBooks"
+ depends on ADB_PMU
+ ---help---
+ This provides support for putting a PowerBook to sleep; it also
+ enables media bay support. Power management works on the
+ PB2400/3400/3500, Wallstreet, Lombard, and Bronze PowerBook G3 and
+ the Titanium Powerbook G4, as well as the iBooks. You should get
+ the power management daemon, pmud, to make it work and you must have
+ the /dev/pmu device (see the pmud README).
+
+ Get pmud from <ftp://ftp.samba.org/pub/ppclinux/pmud/>.
+
+ If you have a PowerBook, you should say Y here.
+
+ You may also want to compile the dma sound driver as a module and
+ have it autoloaded. The act of removing the module shuts down the
+ sound hardware for more power savings.
+
+config PM
+ bool
+ depends on PPC_PMAC && ADB_PMU && PMAC_PBOOK
+ default y
+
+config PMAC_APM_EMU
+ tristate "APM emulation"
+ depends on PMAC_PBOOK
+
+# made a separate option since backlight may end up beeing used
+# on non-powerbook machines (but only on PMU based ones AFAIK)
+config PMAC_BACKLIGHT
+ bool "Backlight control for LCD screens"
+ depends on ADB_PMU
+ help
+ Say Y here to build in code to manage the LCD backlight on a
+ Macintosh PowerBook. With this code, the backlight will be turned
+ on and off appropriately on power-management and lid-open/lid-closed
+ events; also, the PowerBook button device will be enabled so you can
+ change the screen brightness.
+
+config MAC_SERIAL
+ tristate "Support for PowerMac serial ports (OBSOLETE DRIVER)"
+ depends on PPC_PMAC && BROKEN
+ help
+ This driver is obsolete. Use CONFIG_SERIAL_PMACZILOG in
+ "Character devices --> Serial drivers --> PowerMac z85c30" option.
+
+config ADB_MACIO
+ bool "Include MacIO (CHRP) ADB driver"
+ depends on ADB && PPC_CHRP && !PPC_PMAC64
+ help
+ Say Y here to include direct support for the ADB controller in the
+ Hydra chip used on PowerPC Macintoshes of the CHRP type. (The Hydra
+ also includes a MESH II SCSI controller, DBDMA controller, VIA chip,
+ OpenPIC controller and two RS422/Geoports.)
+
+config INPUT_ADBHID
+ bool "Support for ADB input devices (keyboard, mice, ...)"
+ depends on ADB && INPUT=y
+ help
+ Say Y here if you want to have ADB (Apple Desktop Bus) HID devices
+ such as keyboards, mice, joysticks, trackpads or graphic tablets
+ handled by the input layer. If you say Y here, make sure to say Y to
+ the corresponding drivers "Keyboard support" (CONFIG_INPUT_KEYBDEV),
+ "Mouse Support" (CONFIG_INPUT_MOUSEDEV) and "Event interface
+ support" (CONFIG_INPUT_EVDEV) as well.
+
+ If unsure, say Y.
+
+config MAC_EMUMOUSEBTN
+ bool "Support for mouse button 2+3 emulation"
+ depends on INPUT_ADBHID
+ help
+ This provides generic support for emulating the 2nd and 3rd mouse
+ button with keypresses. If you say Y here, the emulation is still
+ disabled by default. The emulation is controlled by these sysctl
+ entries:
+ /proc/sys/dev/mac_hid/mouse_button_emulation
+ /proc/sys/dev/mac_hid/mouse_button2_keycode
+ /proc/sys/dev/mac_hid/mouse_button3_keycode
+
+ If you have an Apple machine with a 1-button mouse, say Y here.
+
+config THERM_WINDTUNNEL
+ tristate "Support for thermal management on Windtunnel G4s"
+ depends on I2C && I2C_KEYWEST && PPC_PMAC && !PPC_PMAC64
+ help
+ This driver provides some thermostat and fan control for the desktop
+ G4 "Windtunnel"
+
+config THERM_ADT746X
+ tristate "Support for thermal mgmnt on laptops with ADT 746x chipset"
+ depends on I2C && I2C_KEYWEST && PPC_PMAC && !PPC_PMAC64
+ help
+ This driver provides some thermostat and fan control for the
+ iBook G4, and the ATI based aluminium PowerBooks, allowing slighlty
+ better fan behaviour by default, and some manual control.
+
+config THERM_PM72
+ tristate "Support for thermal management on PowerMac G5"
+ depends on I2C && I2C_KEYWEST && PPC_PMAC64
+ help
+ This driver provides thermostat and fan control for the desktop
+ G5 machines.
+
+config ANSLCD
+ tristate "Support for ANS LCD display"
+ depends on ADB_CUDA && PPC_PMAC
+
+endmenu