Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (29 commits)
  pcmcia: disable PCMCIA ioctl also for ARM
  drivers/staging/comedi: dev_node removal (quatech_daqp_cs)
  drivers/staging/comedi: dev_node removal (ni_mio_cs)
  drivers/staging/comedi: dev_node removal (ni_labpc_cs)
  drivers/staging/comedi: dev_node removal (ni_daq_dio24)
  drivers/staging/comedi: dev_node removal (ni_daq_700)
  drivers/staging/comedi: dev_node removal (das08_cs)
  drivers/staging/comedi: dev_node removal (cb_das16_cs)
  pata_pcmcia: get rid of extra indirection
  pcmcia: remove suspend-related comment from yenta_socket.c
  pcmcia: call pcmcia_{read,write}_cis_mem with ops_mutex held
  pcmcia: remove pcmcia_add_device_lock
  pcmcia: update gfp/slab.h includes
  pcmcia: remove unused mem_op.h
  pcmcia: do not autoadd root PCI bus resources
  pcmcia: clarify alloc_io_space, move it to resource handlers
  pcmcia: move all pcmcia_resource_ops providers into one module
  pcmcia: move high level CIS access code to separate file
  pcmcia: dev_node removal (core)
  pcmcia: dev_node removal (remaining drivers)
  ...

1 files changed, 5 insertions, 65 deletions

diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c
index 3240791..c2746fc 100644
--- a/drivers/net/wireless/atmel_cs.c
+++ b/drivers/net/wireless/atmel_cs.c
@@ -85,41 +85,7 @@ static void atmel_release(struct pcmcia_device *link);
 
 static void atmel_detach(struct pcmcia_device *p_dev);
 
-/*
-   You'll also need to prototype all the functions that will actually
-   be used to talk to your device.  See 'pcmem_cs' for a good example
-   of a fully self-sufficient driver; the other drivers rely more or
-   less on other parts of the kernel.
-*/
-
-/*
-   A linked list of "instances" of the  atmelnet device.  Each actual
-   PCMCIA card corresponds to one device instance, and is described
-   by one struct pcmcia_device structure (defined in ds.h).
-
-   You may not want to use a linked list for this -- for example, the
-   memory card driver uses an array of struct pcmcia_device pointers, where minor
-   device numbers are used to derive the corresponding array index.
-*/
-
-/*
-   A driver needs to provide a dev_node_t structure for each device
-   on a card.  In some cases, there is only one device per card (for
-   example, ethernet cards, modems).  In other cases, there may be
-   many actual or logical devices (SCSI adapters, memory cards with
-   multiple partitions).  The dev_node_t structures need to be kept
-   in a linked list starting at the 'dev' field of a struct pcmcia_device
-   structure.  We allocate them in the card's private data structure,
-   because they generally shouldn't be allocated dynamically.
-
-   In this case, we also provide a flag to indicate if a device is
-   "stopped" due to a power management event, or card ejection.  The
-   device IO routines can use a flag like this to throttle IO to a
-   card that is not ready to accept it.
-*/
-
 typedef struct local_info_t {
-	dev_node_t	node;
 	struct net_device *eth_dev;
 } local_info_t;
 
@@ -141,10 +107,6 @@ static int atmel_probe(struct pcmcia_device *p_dev)
 
 	dev_dbg(&p_dev->dev, "atmel_attach()\n");
 
-	/* Interrupt setup */
-	p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-	p_dev->irq.Handler = NULL;
-
 	/*
 	  General socket configuration defaults can go here.  In this
 	  client, we assume very little, and rely on the CIS for almost
@@ -226,9 +188,7 @@ static int atmel_config_check(struct pcmcia_device *p_dev,
 	else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM))
 		p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000;
 
-	/* Do we need to allocate an interrupt? */
-	if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
-		p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
 
 	/* IO window settings */
 	p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
@@ -278,15 +238,9 @@ static int atmel_config(struct pcmcia_device *link)
 	if (pcmcia_loop_config(link, atmel_config_check, NULL))
 		goto failed;
 
-	/*
-	  Allocate an interrupt line.  Note that this does not assign a
-	  handler to the interrupt, unless the 'Handler' member of the
-	  irq structure is initialized.
-	*/
-	if (link->conf.Attributes & CONF_ENABLE_IRQ) {
-		ret = pcmcia_request_irq(link, &link->irq);
-		if (ret)
-			goto failed;
+	if (!link->irq) {
+		dev_err(&link->dev, "atmel: cannot assign IRQ: check that CONFIG_ISA is set in kernel config.");
+		goto failed;
 	}
 
 	/*
@@ -298,14 +252,8 @@ static int atmel_config(struct pcmcia_device *link)
 	if (ret)
 		goto failed;
 
-	if (link->irq.AssignedIRQ == 0) {
-		printk(KERN_ALERT
-		       "atmel: cannot assign IRQ: check that CONFIG_ISA is set in kernel config.");
-		goto failed;
-	}
-
 	((local_info_t*)link->priv)->eth_dev =
-		init_atmel_card(link->irq.AssignedIRQ,
+		init_atmel_card(link->irq,
 				link->io.BasePort1,
 				did ? did->driver_info : ATMEL_FW_TYPE_NONE,
 				&link->dev,
@@ -315,14 +263,6 @@ static int atmel_config(struct pcmcia_device *link)
 			goto failed;
 
 
-	/*
-	  At this point, the dev_node_t structure(s) need to be
-	  initialized and arranged in a linked list at link->dev_node.
-	*/
-	strcpy(dev->node.dev_name, ((local_info_t*)link->priv)->eth_dev->name );
-	dev->node.major = dev->node.minor = 0;
-	link->dev_node = &dev->node;
-
 	return 0;
 
  failed: