diff options
author | Grant Grundler <grundler@parisc-linux.org> | 2009-04-20 04:28:22 +0000 |
---|---|---|
committer | Kyle McMartin <kyle@mcmartin.ca> | 2009-07-03 03:34:07 +0000 |
commit | fed99b1e86f5ff4f1b41e37264bb869da67d3174 (patch) | |
tree | eea44830caf663e97041dbb90a2f74cb7e28a1b3 /drivers/parisc | |
parent | 7d17e2763129ea307702fcdc91f6e9d114b65c2d (diff) | |
download | kernel_samsung_espresso10-fed99b1e86f5ff4f1b41e37264bb869da67d3174.zip kernel_samsung_espresso10-fed99b1e86f5ff4f1b41e37264bb869da67d3174.tar.gz kernel_samsung_espresso10-fed99b1e86f5ff4f1b41e37264bb869da67d3174.tar.bz2 |
parisc: advertise PCI devs after "assign_resources"
Alex Chiang asked me why PARISC was calling pci_bus_add_devices()
and pci_bus_assign_resources() in the opposite order from everyone else.
No reason and I couldn't see any data dependency.
Patch below applies cleanly to 2.6.30-rc2.
Later, I suspected the code worked only because no drivers would be
loaded/ready until much later in the system initialization sequence.
Tested "LBA" code on J6000 (32-bit) and A500 (64-bit SMP) with 2.6.30-rc2.
Not tested with any Dino controllers.
Not tested with PCI-PCI Bridge (TBD).
Reported-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
Diffstat (limited to 'drivers/parisc')
-rw-r--r-- | drivers/parisc/dino.c | 10 | ||||
-rw-r--r-- | drivers/parisc/lba_pci.c | 10 |
2 files changed, 10 insertions, 10 deletions
diff --git a/drivers/parisc/dino.c b/drivers/parisc/dino.c index 52ae0b1..d327c2d 100644 --- a/drivers/parisc/dino.c +++ b/drivers/parisc/dino.c @@ -1019,22 +1019,22 @@ static int __init dino_probe(struct parisc_device *dev) ** It's not used to avoid chicken/egg problems ** with configuration accessor functions. */ - bus = pci_scan_bus_parented(&dev->dev, dino_current_bus, - &dino_cfg_ops, NULL); + dino_dev->hba.hba_bus = bus = pci_scan_bus_parented(&dev->dev, + dino_current_bus, &dino_cfg_ops, NULL); + if(bus) { - pci_bus_add_devices(bus); /* This code *depends* on scanning being single threaded * if it isn't, this global bus number count will fail */ dino_current_bus = bus->subordinate + 1; pci_bus_assign_resources(bus); + pci_bus_add_devices(bus); } else { - printk(KERN_ERR "ERROR: failed to scan PCI bus on %s (probably duplicate bus number %d)\n", + printk(KERN_ERR "ERROR: failed to scan PCI bus on %s (duplicate bus number %d?)\n", dev_name(&dev->dev), dino_current_bus); /* increment the bus number in case of duplicates */ dino_current_bus++; } - dino_dev->hba.hba_bus = bus; return 0; } diff --git a/drivers/parisc/lba_pci.c b/drivers/parisc/lba_pci.c index 59fbbf1..f2661e1 100644 --- a/drivers/parisc/lba_pci.c +++ b/drivers/parisc/lba_pci.c @@ -1509,10 +1509,6 @@ lba_driver_probe(struct parisc_device *dev) lba_bus = lba_dev->hba.hba_bus = pci_scan_bus_parented(&dev->dev, lba_dev->hba.bus_num.start, cfg_ops, NULL); - if (lba_bus) { - lba_next_bus = lba_bus->subordinate + 1; - pci_bus_add_devices(lba_bus); - } /* This is in lieu of calling pci_assign_unassigned_resources() */ if (is_pdc_pat()) { @@ -1533,7 +1529,6 @@ lba_driver_probe(struct parisc_device *dev) } pci_enable_bridges(lba_bus); - /* ** Once PCI register ops has walked the bus, access to config ** space is restricted. Avoids master aborts on config cycles. @@ -1543,6 +1538,11 @@ lba_driver_probe(struct parisc_device *dev) lba_dev->flags |= LBA_FLAG_SKIP_PROBE; } + if (lba_bus) { + lba_next_bus = lba_bus->subordinate + 1; + pci_bus_add_devices(lba_bus); + } + /* Whew! Finally done! Tell services we got this one covered. */ return 0; } |