diff options
| author | Haavard Skinnemoen <hskinnemoen@atmel.com> | 2006-10-04 16:02:08 +0200 |
|---|---|---|
| committer | Linus Torvalds <torvalds@g5.osdl.org> | 2006-10-04 10:25:05 -0700 |
| commit | 75d35213777e2b278db57a420efbce2bdb61da93 (patch) | |
| tree | 2731fc81e13bdca84e6db26a6278c3c9dedca642 /drivers/serial | |
| parent | 71f2e2b8783f7b270b673e31e2322572057b286a (diff) | |
| download | kernel_samsung_espresso10-75d35213777e2b278db57a420efbce2bdb61da93.zip kernel_samsung_espresso10-75d35213777e2b278db57a420efbce2bdb61da93.tar.gz kernel_samsung_espresso10-75d35213777e2b278db57a420efbce2bdb61da93.tar.bz2 | |
[PATCH] atmel_serial: Pass fixed register mappings through platform_data
In order to initialize the serial console early, the atmel_serial
driver had to do a hack where it compared the physical address of the
port with an address known to be permanently mapped, and used it as a
virtual address. This got around the limitation that ioremap() isn't
always available when the console is being initalized.
This patch removes that hack and replaces it with a new "regs" field
in struct atmel_uart_data that the board-specific code can initialize
to a fixed virtual mapping for platform devices where this is possible.
It also initializes the DBGU's regs field with the address the driver
used to check against.
On AVR32, the "regs" field is initialized from the physical base
address when this it can be accessed through a permanently 1:1 mapped
segment, i.e. the P4 segment.
If regs is NULL, the console initialization is delayed until the "real"
driver is up and running and ioremap() can be used.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Diffstat (limited to 'drivers/serial')
| -rw-r--r-- | drivers/serial/atmel_serial.c | 5 |
1 files changed, 3 insertions, 2 deletions
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c index 2f9d99b..34212df 100644 --- a/drivers/serial/atmel_serial.c +++ b/drivers/serial/atmel_serial.c @@ -694,8 +694,9 @@ static void __devinit atmel_init_port(struct atmel_uart_port *atmel_port, struct port->mapbase = pdev->resource[0].start; port->irq = pdev->resource[1].start; - if (port->mapbase == AT91_VA_BASE_SYS + AT91_DBGU) /* Part of system perpherals - already mapped */ - port->membase = (void __iomem *) port->mapbase; + if (data->regs) + /* Already mapped by setup code */ + port->membase = data->regs; else { port->flags |= UPF_IOREMAP; port->membase = NULL; |