Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (22 commits)
  pcmcia: synclink_cs: fix information leak to userland
  pcmcia: don't call flush_scheduled_work() spuriously
  serial_cs: drop spurious flush_scheduled_work() call
  pcmcia/yenta: guide users in case of problems with O2-bridges
  pcmcia: fix unused function compile warning
  pcmcia: vrc4173_cardu: Fix error path for pci_release_regions and pci_disable_device
  pcmcia: add a few debug statements
  pcmcia: remove obsolete and wrong comments
  pcmcia: avoid messages on module (un)loading
  pcmcia: move driver name to struct pcmcia_driver
  pcmcia: remove the "Finally, report what we've done" message
  pcmcia: use autoconfiguration feature for ioports and iomem
  pcmcia: introduce autoconfiguration feature
  pcmcia: Documentation update
  pcmcia: convert pcmcia_request_configuration to pcmcia_enable_device
  pcmcia: move config_{base,index,regs} to struct pcmcia_device
  pcmcia: simplify IntType
  pcmcia: simplify Status, ExtStatus register access
  pcmcia: remove Pin, Copy configuration register access
  pcmcia: move Vpp setup to struct pcmcia_device
  ...

10 files changed, 58 insertions, 777 deletions

diff --git a/drivers/staging/comedi/drivers/cb_das16_cs.c b/drivers/staging/comedi/drivers/cb_das16_cs.c
index f8ede11..0345b4c 100644
--- a/drivers/staging/comedi/drivers/cb_das16_cs.c
+++ b/drivers/staging/comedi/drivers/cb_das16_cs.c
@@ -37,7 +37,6 @@ Status: experimental
 #include <linux/delay.h>
 #include <linux/pci.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
 
@@ -692,10 +691,6 @@ static int das16cs_pcmcia_attach(struct pcmcia_device *link)
 	local->link = link;
 	link->priv = local;
 
-	/* Initialize the pcmcia_device structure */
-	link->conf.Attributes = 0;
-	link->conf.IntType = INT_MEMORY_AND_IO;
-
 	cur_dev = link;
 
 	das16cs_pcmcia_config(link);
@@ -715,37 +710,12 @@ static void das16cs_pcmcia_detach(struct pcmcia_device *link)
 
 
 static int das16cs_pcmcia_config_loop(struct pcmcia_device *p_dev,
-				cistpl_cftable_entry_t *cfg,
-				cistpl_cftable_entry_t *dflt,
-				unsigned int vcc,
 				void *priv_data)
 {
-	if (cfg->index == 0)
+	if (p_dev->config_index == 0)
 		return -EINVAL;
 
-	/* Do we need to allocate an interrupt? */
-	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
-
-	/* IO window settings */
-	p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
-	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
-		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
-		p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
-		p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
-		p_dev->resource[0]->flags |=
-			pcmcia_io_cfg_data_width(io->flags);
-		p_dev->resource[0]->start = io->win[0].base;
-		p_dev->resource[0]->end = io->win[0].len;
-		if (io->nwin > 1) {
-			p_dev->resource[1]->flags = p_dev->resource[0]->flags;
-			p_dev->resource[1]->start = io->win[1].base;
-			p_dev->resource[1]->end = io->win[1].len;
-		}
-		/* This reserves IO space but doesn't actually enable it */
-		return pcmcia_request_io(p_dev);
-	}
-
-	return 0;
+	return pcmcia_request_io(p_dev);
 }
 
 static void das16cs_pcmcia_config(struct pcmcia_device *link)
@@ -754,6 +724,9 @@ static void das16cs_pcmcia_config(struct pcmcia_device *link)
 
 	dev_dbg(&link->dev, "das16cs_pcmcia_config\n");
 
+	/* Do we need to allocate an interrupt? */
+	link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
+
 	ret = pcmcia_loop_config(link, das16cs_pcmcia_config_loop, NULL);
 	if (ret) {
 		dev_warn(&link->dev, "no configuration found\n");
@@ -763,25 +736,10 @@ static void das16cs_pcmcia_config(struct pcmcia_device *link)
 	if (!link->irq)
 		goto failed;
 
-	/*
-	   This actually configures the PCMCIA socket -- setting up
-	   the I/O windows and the interrupt mapping, and putting the
-	   card and host interface into "Memory and IO" mode.
-	 */
-	ret = pcmcia_request_configuration(link, &link->conf);
+	ret = pcmcia_enable_device(link);
 	if (ret)
 		goto failed;
 
-	/* Finally, report what we've done */
-	dev_info(&link->dev, "index 0x%02x", link->conf.ConfigIndex);
-	if (link->conf.Attributes & CONF_ENABLE_IRQ)
-		printk(", irq %u", link->irq);
-	if (link->resource[0])
-		printk(", io %pR", link->resource[0]);
-	if (link->resource[1])
-		printk(", io %pR", link->resource[1]);
-	printk("\n");
-
 	return;
 
 failed:
@@ -832,9 +790,7 @@ struct pcmcia_driver das16cs_driver = {
 	.resume = das16cs_pcmcia_resume,
 	.id_table = das16cs_id_table,
 	.owner = THIS_MODULE,
-	.drv = {
-		.name = "cb_das16_cs",
-		},
+	.name = "cb_das16_cs",
 };
 
 static int __init init_das16cs_pcmcia_cs(void)
diff --git a/drivers/staging/comedi/drivers/das08_cs.c b/drivers/staging/comedi/drivers/das08_cs.c
index 48d9fb1..0b32a2d 100644
--- a/drivers/staging/comedi/drivers/das08_cs.c
+++ b/drivers/staging/comedi/drivers/das08_cs.c
@@ -48,7 +48,6 @@ Command support does not exist, but could be added for this board.
 #include "das08.h"
 
 /* pcmcia includes */
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
 
@@ -115,40 +114,15 @@ static void das08_pcmcia_release(struct pcmcia_device *link);
 static int das08_pcmcia_suspend(struct pcmcia_device *p_dev);
 static int das08_pcmcia_resume(struct pcmcia_device *p_dev);
 
-/*
-   The attach() and detach() entry points are used to create and destroy
-   "instances" of the driver, where each instance represents everything
-   needed to manage one actual PCMCIA card.
-*/
-
 static int das08_pcmcia_attach(struct pcmcia_device *);
 static void das08_pcmcia_detach(struct pcmcia_device *);
 
-/*
-   You'll also need to prototype all the functions that will actually
-   be used to talk to your device.  See 'memory_cs' for a good example
-   of a fully self-sufficient driver; the other drivers rely more or
-   less on other parts of the kernel.
-*/
-
 struct local_info_t {
 	struct pcmcia_device *link;
 	int stop;
 	struct bus_operations *bus;
 };
 
-/*======================================================================
-
-    das08_pcmcia_attach() creates an "instance" of the driver, allocating
-    local data structures for one device.  The device is registered
-    with Card Services.
-
-    The dev_link structure is initialized, but we don't actually
-    configure the card at this point -- we wait until we receive a
-    card insertion event.
-
-======================================================================*/
-
 static int das08_pcmcia_attach(struct pcmcia_device *link)
 {
 	struct local_info_t *local;
@@ -162,16 +136,6 @@ static int das08_pcmcia_attach(struct pcmcia_device *link)
 	local->link = link;
 	link->priv = local;
 
-	/*
-	   General socket configuration defaults can go here.  In this
-	   client, we assume very little, and rely on the CIS for almost
-	   everything.  In most clients, many details (i.e., number, sizes,
-	   and attributes of IO windows) are fixed by the nature of the
-	   device, and can be hard-wired here.
-	 */
-	link->conf.Attributes = 0;
-	link->conf.IntType = INT_MEMORY_AND_IO;
-
 	cur_dev = link;
 
 	das08_pcmcia_config(link);
@@ -179,15 +143,6 @@ static int das08_pcmcia_attach(struct pcmcia_device *link)
 	return 0;
 }				/* das08_pcmcia_attach */
 
-/*======================================================================
-
-    This deletes a driver "instance".  The device is de-registered
-    with Card Services.  If it has been released, all local data
-    structures are freed.  Otherwise, the structures will be freed
-    when the device is released.
-
-======================================================================*/
-
 static void das08_pcmcia_detach(struct pcmcia_device *link)
 {
 
@@ -203,46 +158,13 @@ static void das08_pcmcia_detach(struct pcmcia_device *link)
 
 
 static int das08_pcmcia_config_loop(struct pcmcia_device *p_dev,
-				cistpl_cftable_entry_t *cfg,
-				cistpl_cftable_entry_t *dflt,
-				unsigned int vcc,
 				void *priv_data)
 {
-	if (cfg->index == 0)
-		return -ENODEV;
-
-	/* Do we need to allocate an interrupt? */
-	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
-
-	/* IO window settings */
-	p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
-	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
-		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
-		p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
-		p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
-		p_dev->resource[0]->flags |=
-			pcmcia_io_cfg_data_width(io->flags);
-		p_dev->resource[0]->start = io->win[0].base;
-		p_dev->resource[0]->end = io->win[0].len;
-		if (io->nwin > 1) {
-			p_dev->resource[1]->flags = p_dev->resource[0]->flags;
-			p_dev->resource[1]->start = io->win[1].base;
-			p_dev->resource[1]->end = io->win[1].len;
-		}
-		/* This reserves IO space but doesn't actually enable it */
-		return pcmcia_request_io(p_dev);
-	}
-	return 0;
-}
-
-
-/*======================================================================
-
-    das08_pcmcia_config() is scheduled to run after a CARD_INSERTION event
-    is received, to configure the PCMCIA socket, and to make the
-    device available to the system.
+	if (p_dev->config_index == 0)
+		return -EINVAL;
 
-======================================================================*/
+	return pcmcia_request_io(p_dev);
+}
 
 static void das08_pcmcia_config(struct pcmcia_device *link)
 {
@@ -250,6 +172,8 @@ static void das08_pcmcia_config(struct pcmcia_device *link)
 
 	dev_dbg(&link->dev, "das08_pcmcia_config\n");
 
+	link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
+
 	ret = pcmcia_loop_config(link, das08_pcmcia_config_loop, NULL);
 	if (ret) {
 		dev_warn(&link->dev, "no configuration found\n");
@@ -259,25 +183,10 @@ static void das08_pcmcia_config(struct pcmcia_device *link)
 	if (!link->irq)
 		goto failed;
 
-	/*
-	   This actually configures the PCMCIA socket -- setting up
-	   the I/O windows and the interrupt mapping, and putting the
-	   card and host interface into "Memory and IO" mode.
-	 */
-	ret = pcmcia_request_configuration(link, &link->conf);
+	ret = pcmcia_enable_device(link);
 	if (ret)
 		goto failed;
 
-	/* Finally, report what we've done */
-	dev_info(&link->dev, "index 0x%02x", link->conf.ConfigIndex);
-	if (link->conf.Attributes & CONF_ENABLE_IRQ)
-		printk(", irq %u", link->irq);
-	if (link->resource[0])
-		printk(", io %pR", link->resource[0]);
-	if (link->resource[1])
-		printk(" & %pR", link->resource[1]);
-	printk("\n");
-
 	return;
 
 failed:
@@ -285,32 +194,12 @@ failed:
 
 }				/* das08_pcmcia_config */
 
-/*======================================================================
-
-    After a card is removed, das08_pcmcia_release() will unregister the
-    device, and release the PCMCIA configuration.  If the device is
-    still open, this will be postponed until it is closed.
-
-======================================================================*/
-
 static void das08_pcmcia_release(struct pcmcia_device *link)
 {
 	dev_dbg(&link->dev, "das08_pcmcia_release\n");
 	pcmcia_disable_device(link);
 }				/* das08_pcmcia_release */
 
-/*======================================================================
-
-    The card status event handler.  Mostly, this schedules other
-    stuff to run after an event is received.
-
-    When a CARD_REMOVAL event is received, we immediately set a
-    private flag to block future accesses to this device.  All the
-    functions that actually access the device should check this flag
-    to make sure the card is still present.
-
-======================================================================*/
-
 static int das08_pcmcia_suspend(struct pcmcia_device *link)
 {
 	struct local_info_t *local = link->priv;
@@ -348,9 +237,7 @@ struct pcmcia_driver das08_cs_driver = {
 	.resume = das08_pcmcia_resume,
 	.id_table = das08_cs_id_table,
 	.owner = THIS_MODULE,
-	.drv = {
-		.name = "pcm-das08",
-		},
+	.name = "pcm-das08",
 };
 
 static int __init init_das08_pcmcia_cs(void)
diff --git a/drivers/staging/comedi/drivers/ni_daq_700.c b/drivers/staging/comedi/drivers/ni_daq_700.c
index cc15666..fc772a8 100644
--- a/drivers/staging/comedi/drivers/ni_daq_700.c
+++ b/drivers/staging/comedi/drivers/ni_daq_700.c
@@ -47,7 +47,6 @@ IRQ is assigned but not used.
 
 #include <linux/ioport.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/ds.h>
@@ -435,47 +434,20 @@ static int dio700_detach(struct comedi_device *dev)
 	return 0;
 };
 
-/* PCMCIA crap -- watch your words, please! */
-
 static void dio700_config(struct pcmcia_device *link);
 static void dio700_release(struct pcmcia_device *link);
 static int dio700_cs_suspend(struct pcmcia_device *p_dev);
 static int dio700_cs_resume(struct pcmcia_device *p_dev);
 
-/*
-   The attach() and detach() entry points are used to create and destroy
-   "instances" of the driver, where each instance represents everything
-   needed to manage one actual PCMCIA card.
-*/
-
 static int dio700_cs_attach(struct pcmcia_device *);
 static void dio700_cs_detach(struct pcmcia_device *);
 
-/*
-   You'll also need to prototype all the functions that will actually
-   be used to talk to your device.  See 'memory_cs' for a good example
-   of a fully self-sufficient driver; the other drivers rely more or
-   less on other parts of the kernel.
-*/
-
 struct local_info_t {
 	struct pcmcia_device *link;
 	int stop;
 	struct bus_operations *bus;
 };
 
-/*======================================================================
-
-    dio700_cs_attach() creates an "instance" of the driver, allocating
-    local data structures for one device.  The device is registered
-    with Card Services.
-
-    The dev_link structure is initialized, but we don't actually
-    configure the card at this point -- we wait until we receive a
-    card insertion event.
-
-======================================================================*/
-
 static int dio700_cs_attach(struct pcmcia_device *link)
 {
 	struct local_info_t *local;
@@ -491,16 +463,6 @@ static int dio700_cs_attach(struct pcmcia_device *link)
 	local->link = link;
 	link->priv = local;
 
-	/*
-	   General socket configuration defaults can go here.  In this
-	   client, we assume very little, and rely on the CIS for almost
-	   everything.  In most clients, many details (i.e., number, sizes,
-	   and attributes of IO windows) are fixed by the nature of the
-	   device, and can be hard-wired here.
-	 */
-	link->conf.Attributes = 0;
-	link->conf.IntType = INT_MEMORY_AND_IO;
-
 	pcmcia_cur_dev = link;
 
 	dio700_config(link);
@@ -508,15 +470,6 @@ static int dio700_cs_attach(struct pcmcia_device *link)
 	return 0;
 }				/* dio700_cs_attach */
 
-/*======================================================================
-
-    This deletes a driver "instance".  The device is de-registered
-    with Card Services.  If it has been released, all local data
-    structures are freed.  Otherwise, the structures will be freed
-    when the device is released.
-
-======================================================================*/
-
 static void dio700_cs_detach(struct pcmcia_device *link)
 {
 
@@ -532,54 +485,13 @@ static void dio700_cs_detach(struct pcmcia_device *link)
 
 }				/* dio700_cs_detach */
 
-/*======================================================================
-
-    dio700_config() is scheduled to run after a CARD_INSERTION event
-    is received, to configure the PCMCIA socket, and to make the
-    device available to the system.
-
-======================================================================*/
-
 static int dio700_pcmcia_config_loop(struct pcmcia_device *p_dev,
-				cistpl_cftable_entry_t *cfg,
-				cistpl_cftable_entry_t *dflt,
-				unsigned int vcc,
 				void *priv_data)
 {
-	if (cfg->index == 0)
-		return -ENODEV;
-
-	/* Does this card need audio output? */
-	if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
-		p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
-		p_dev->conf.Status = CCSR_AUDIO_ENA;
-	}
-
-	/* Do we need to allocate an interrupt? */
-	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
-
-	/* IO window settings */
-	p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
-	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
-		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
-		p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
-		p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
-		p_dev->resource[0]->flags |=
-			pcmcia_io_cfg_data_width(io->flags);
-		p_dev->resource[0]->start = io->win[0].base;
-		p_dev->resource[0]->end = io->win[0].len;
-		if (io->nwin > 1) {
-			p_dev->resource[1]->flags = p_dev->resource[0]->flags;
-			p_dev->resource[1]->start = io->win[1].base;
-			p_dev->resource[1]->end = io->win[1].len;
-		}
-		/* This reserves IO space but doesn't actually enable it */
-		if (pcmcia_request_io(p_dev) != 0)
-			return -ENODEV;
-	}
+	if (p_dev->config_index == 0)
+		return -EINVAL;
 
-	/* If we got this far, we're cool! */
-	return 0;
+	return pcmcia_request_io(p_dev);
 }
 
 static void dio700_config(struct pcmcia_device *link)
@@ -591,6 +503,9 @@ static void dio700_config(struct pcmcia_device *link)
 
 	dev_dbg(&link->dev, "dio700_config\n");
 
+	link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_AUDIO |
+		CONF_AUTO_SET_IO;
+
 	ret = pcmcia_loop_config(link, dio700_pcmcia_config_loop, NULL);
 	if (ret) {
 		dev_warn(&link->dev, "no configuration found\n");
@@ -600,25 +515,10 @@ static void dio700_config(struct pcmcia_device *link)
 	if (!link->irq)
 		goto failed;
 
-	/*
-	   This actually configures the PCMCIA socket -- setting up
-	   the I/O windows and the interrupt mapping, and putting the
-	   card and host interface into "Memory and IO" mode.
-	 */
-	ret = pcmcia_request_configuration(link, &link->conf);
+	ret = pcmcia_enable_device(link);
 	if (ret != 0)
 		goto failed;
 
-	/* Finally, report what we've done */
-	dev_info(&link->dev, "index 0x%02x", link->conf.ConfigIndex);
-	if (link->conf.Attributes & CONF_ENABLE_IRQ)
-		printk(", irq %d", link->irq);
-	if (link->resource[0])
-		printk(", io %pR", link->resource[0]);
-	if (link->resource[1])
-		printk(" & %pR", link->resource[1]);
-	printk("\n");
-
 	return;
 
 failed:
@@ -634,18 +534,6 @@ static void dio700_release(struct pcmcia_device *link)
 	pcmcia_disable_device(link);
 }				/* dio700_release */
 
-/*======================================================================
-
-    The card status event handler.  Mostly, this schedules other
-    stuff to run after an event is received.
-
-    When a CARD_REMOVAL event is received, we immediately set a
-    private flag to block future accesses to this device.  All the
-    functions that actually access the device should check this flag
-    to make sure the card is still present.
-
-======================================================================*/
-
 static int dio700_cs_suspend(struct pcmcia_device *link)
 {
 	struct local_info_t *local = link->priv;
@@ -685,9 +573,7 @@ struct pcmcia_driver dio700_cs_driver = {
 	.resume = dio700_cs_resume,
 	.id_table = dio700_cs_ids,
 	.owner = THIS_MODULE,
-	.drv = {
-		.name = "ni_daq_700",
-		},
+	.name = "ni_daq_700",
 };
 
 static int __init init_dio700_cs(void)
diff --git a/drivers/staging/comedi/drivers/ni_daq_dio24.c b/drivers/staging/comedi/drivers/ni_daq_dio24.c
index 773ae20..c9c2858 100644
--- a/drivers/staging/comedi/drivers/ni_daq_dio24.c
+++ b/drivers/staging/comedi/drivers/ni_daq_dio24.c
@@ -48,7 +48,6 @@ the PCMCIA interface.
 
 #include "8255.h"
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/ds.h>
@@ -187,47 +186,20 @@ static int dio24_detach(struct comedi_device *dev)
 	return 0;
 };
 
-/* PCMCIA crap -- watch your words! */
-
 static void dio24_config(struct pcmcia_device *link);
 static void dio24_release(struct pcmcia_device *link);
 static int dio24_cs_suspend(struct pcmcia_device *p_dev);
 static int dio24_cs_resume(struct pcmcia_device *p_dev);
 
-/*
-   The attach() and detach() entry points are used to create and destroy
-   "instances" of the driver, where each instance represents everything
-   needed to manage one actual PCMCIA card.
-*/
-
 static int dio24_cs_attach(struct pcmcia_device *);
 static void dio24_cs_detach(struct pcmcia_device *);
 
-/*
-   You'll also need to prototype all the functions that will actually
-   be used to talk to your device.  See 'memory_cs' for a good example
-   of a fully self-sufficient driver; the other drivers rely more or
-   less on other parts of the kernel.
-*/
-
 struct local_info_t {
 	struct pcmcia_device *link;
 	int stop;
 	struct bus_operations *bus;
 };
 
-/*======================================================================
-
-    dio24_cs_attach() creates an "instance" of the driver, allocating
-    local data structures for one device.  The device is registered
-    with Card Services.
-
-    The dev_link structure is initialized, but we don't actually
-    configure the card at this point -- we wait until we receive a
-    card insertion event.
-
-======================================================================*/
-
 static int dio24_cs_attach(struct pcmcia_device *link)
 {
 	struct local_info_t *local;
@@ -243,16 +215,6 @@ static int dio24_cs_attach(struct pcmcia_device *link)
 	local->link = link;
 	link->priv = local;
 
-	/*
-	   General socket configuration defaults can go here.  In this
-	   client, we assume very little, and rely on the CIS for almost
-	   everything.  In most clients, many details (i.e., number, sizes,
-	   and attributes of IO windows) are fixed by the nature of the
-	   device, and can be hard-wired here.
-	 */
-	link->conf.Attributes = 0;
-	link->conf.IntType = INT_MEMORY_AND_IO;
-
 	pcmcia_cur_dev = link;
 
 	dio24_config(link);
@@ -260,15 +222,6 @@ static int dio24_cs_attach(struct pcmcia_device *link)
 	return 0;
 }				/* dio24_cs_attach */
 
-/*======================================================================
-
-    This deletes a driver "instance".  The device is de-registered
-    with Card Services.  If it has been released, all local data
-    structures are freed.  Otherwise, the structures will be freed
-    when the device is released.
-
-======================================================================*/
-
 static void dio24_cs_detach(struct pcmcia_device *link)
 {
 
@@ -284,54 +237,13 @@ static void dio24_cs_detach(struct pcmcia_device *link)
 
 }				/* dio24_cs_detach */
 
-/*======================================================================
-
-    dio24_config() is scheduled to run after a CARD_INSERTION event
-    is received, to configure the PCMCIA socket, and to make the
-    device available to the system.
-
-======================================================================*/
-
 static int dio24_pcmcia_config_loop(struct pcmcia_device *p_dev,
-				cistpl_cftable_entry_t *cfg,
-				cistpl_cftable_entry_t *dflt,
-				unsigned int vcc,
 				void *priv_data)
 {
-	if (cfg->index == 0)
-		return -ENODEV;
-
-	/* Does this card need audio output? */
-	if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
-		p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
-		p_dev->conf.Status = CCSR_AUDIO_ENA;
-	}
-
-	/* Do we need to allocate an interrupt? */
-	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
-
-	/* IO window settings */
-	p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
-	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
-		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
-		p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
-		p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
-		p_dev->resource[0]->flags |=
-			pcmcia_io_cfg_data_width(io->flags);
-		p_dev->resource[0]->start = io->win[0].base;
-		p_dev->resource[0]->end = io->win[0].len;
-		if (io->nwin > 1) {
-			p_dev->resource[1]->flags = p_dev->resource[0]->flags;
-			p_dev->resource[1]->start = io->win[1].base;
-			p_dev->resource[1]->end = io->win[1].len;
-		}
-		/* This reserves IO space but doesn't actually enable it */
-		if (pcmcia_request_io(p_dev) != 0)
-			return -ENODEV;
-	}
+	if (p_dev->config_index == 0)
+		return -EINVAL;
 
-	/* If we got this far, we're cool! */
-	return 0;
+	return pcmcia_request_io(p_dev);
 }
 
 static void dio24_config(struct pcmcia_device *link)
@@ -342,6 +254,9 @@ static void dio24_config(struct pcmcia_device *link)
 
 	dev_dbg(&link->dev, "dio24_config\n");
 
+	link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_AUDIO |
+		CONF_AUTO_SET_IO;
+
 	ret = pcmcia_loop_config(link, dio24_pcmcia_config_loop, NULL);
 	if (ret) {
 		dev_warn(&link->dev, "no configuration found\n");
@@ -351,25 +266,10 @@ static void dio24_config(struct pcmcia_device *link)
 	if (!link->irq)
 		goto failed;
 
-	/*
-	   This actually configures the PCMCIA socket -- setting up
-	   the I/O windows and the interrupt mapping, and putting the
-	   card and host interface into "Memory and IO" mode.
-	 */
-	ret = pcmcia_request_configuration(link, &link->conf);
+	ret = pcmcia_enable_device(link);
 	if (ret)
 		goto failed;
 
-	/* Finally, report what we've done */
-	dev_info(&link->dev, "index 0x%02x", link->conf.ConfigIndex);
-	if (link->conf.Attributes & CONF_ENABLE_IRQ)
-		printk(", irq %d", link->irq);
-	if (link->resource[0])
-		printk(" & %pR", link->resource[0]);
-	if (link->resource[1])
-		printk(" & %pR", link->resource[1]);
-	printk("\n");
-
 	return;
 
 failed:
@@ -385,18 +285,6 @@ static void dio24_release(struct pcmcia_device *link)
 	pcmcia_disable_device(link);
 }				/* dio24_release */
 
-/*======================================================================
-
-    The card status event handler.  Mostly, this schedules other
-    stuff to run after an event is received.
-
-    When a CARD_REMOVAL event is received, we immediately set a
-    private flag to block future accesses to this device.  All the
-    functions that actually access the device should check this flag
-    to make sure the card is still present.
-
-======================================================================*/
-
 static int dio24_cs_suspend(struct pcmcia_device *link)
 {
 	struct local_info_t *local = link->priv;
@@ -435,9 +323,7 @@ struct pcmcia_driver dio24_cs_driver = {
 	.resume = dio24_cs_resume,
 	.id_table = dio24_cs_ids,
 	.owner = THIS_MODULE,
-	.drv = {
-		.name = "ni_daq_dio24",
-		},
+	.name = "ni_daq_dio24",
 };
 
 static int __init init_dio24_cs(void)
diff --git a/drivers/staging/comedi/drivers/ni_labpc_cs.c b/drivers/staging/comedi/drivers/ni_labpc_cs.c
index 68c4ecb..6facbc8 100644
--- a/drivers/staging/comedi/drivers/ni_labpc_cs.c
+++ b/drivers/staging/comedi/drivers/ni_labpc_cs.c
@@ -71,7 +71,6 @@ NI manuals:
 #include "comedi_fc.h"
 #include "ni_labpc.h"
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/ds.h>
@@ -153,59 +152,20 @@ static int labpc_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	return labpc_common_attach(dev, iobase, irq, 0);
 }
 
-/*====================================================================*/
-
-/*
-   The event() function is this driver's Card Services event handler.
-   It will be called by Card Services when an appropriate card status
-   event is received.  The config() and release() entry points are
-   used to configure or release a socket, in response to card
-   insertion and ejection events.  They are invoked from the dummy
-   event handler.
-
-   Kernel version 2.6.16 upwards uses suspend() and resume() functions
-   instead of an event() function.
-*/
-
 static void labpc_config(struct pcmcia_device *link);
 static void labpc_release(struct pcmcia_device *link);
 static int labpc_cs_suspend(struct pcmcia_device *p_dev);
 static int labpc_cs_resume(struct pcmcia_device *p_dev);
 
-/*
-   The attach() and detach() entry points are used to create and destroy
-   "instances" of the driver, where each instance represents everything
-   needed to manage one actual PCMCIA card.
-*/
-
 static int labpc_cs_attach(struct pcmcia_device *);
 static void labpc_cs_detach(struct pcmcia_device *);
 
-/*
-   You'll also need to prototype all the functions that will actually
-   be used to talk to your device.  See 'memory_cs' for a good example
-   of a fully self-sufficient driver; the other drivers rely more or
-   less on other parts of the kernel.
-*/
-
 struct local_info_t {
 	struct pcmcia_device *link;
 	int stop;
 	struct bus_operations *bus;
 };
 
-/*======================================================================
-
-    labpc_cs_attach() creates an "instance" of the driver, allocating
-    local data structures for one device.  The device is registered
-    with Card Services.
-
-    The dev_link structure is initialized, but we don't actually
-    configure the card at this point -- we wait until we receive a
-    card insertion event.
-
-======================================================================*/
-
 static int labpc_cs_attach(struct pcmcia_device *link)
 {
 	struct local_info_t *local;
@@ -219,16 +179,6 @@ static int labpc_cs_attach(struct pcmcia_device *link)
 	local->link = link;
 	link->priv = local;
 
-	/*
-	   General socket configuration defaults can go here.  In this
-	   client, we assume very little, and rely on the CIS for almost
-	   everything.  In most clients, many details (i.e., number, sizes,
-	   and attributes of IO windows) are fixed by the nature of the
-	   device, and can be hard-wired here.
-	 */
-	link->conf.Attributes = 0;
-	link->conf.IntType = INT_MEMORY_AND_IO;
-
 	pcmcia_cur_dev = link;
 
 	labpc_config(link);
@@ -236,15 +186,6 @@ static int labpc_cs_attach(struct pcmcia_device *link)
 	return 0;
 }				/* labpc_cs_attach */
 
-/*======================================================================
-
-    This deletes a driver "instance".  The device is de-registered
-    with Card Services.  If it has been released, all local data
-    structures are freed.  Otherwise, the structures will be freed
-    when the device is released.
-
-======================================================================*/
-
 static void labpc_cs_detach(struct pcmcia_device *link)
 {
 	dev_dbg(&link->dev, "labpc_cs_detach\n");
@@ -263,54 +204,13 @@ static void labpc_cs_detach(struct pcmcia_device *link)
 
 }				/* labpc_cs_detach */
 
-/*======================================================================
-
-    labpc_config() is scheduled to run after a CARD_INSERTION event
-    is received, to configure the PCMCIA socket, and to make the
-    device available to the system.
-
-======================================================================*/
-
 static int labpc_pcmcia_config_loop(struct pcmcia_device *p_dev,
-				cistpl_cftable_entry_t *cfg,
-				cistpl_cftable_entry_t *dflt,
-				unsigned int vcc,
 				void *priv_data)
 {
-	if (cfg->index == 0)
-		return -ENODEV;
-
-	/* Does this card need audio output? */
-	if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
-		p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
-		p_dev->conf.Status = CCSR_AUDIO_ENA;
-	}
-
-	/* Do we need to allocate an interrupt? */
-	p_dev->conf.Attributes |= CONF_ENABLE_IRQ | CONF_ENABLE_PULSE_IRQ;
-
-	/* IO window settings */
-	p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
-	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
-		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
-		p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
-		p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
-		p_dev->resource[0]->flags |=
-			pcmcia_io_cfg_data_width(io->flags);
-		p_dev->resource[0]->start = io->win[0].base;
-		p_dev->resource[0]->end = io->win[0].len;
-		if (io->nwin > 1) {
-			p_dev->resource[1]->flags = p_dev->resource[0]->flags;
-			p_dev->resource[1]->start = io->win[1].base;
-			p_dev->resource[1]->end = io->win[1].len;
-		}
-		/* This reserves IO space but doesn't actually enable it */
-		if (pcmcia_request_io(p_dev) != 0)
-			return -ENODEV;
-	}
+	if (p_dev->config_index == 0)
+		return -EINVAL;
 
-	/* If we got this far, we're cool! */
-	return 0;
+	return pcmcia_request_io(p_dev);
 }
 
 
@@ -320,6 +220,9 @@ static void labpc_config(struct pcmcia_device *link)
 
 	dev_dbg(&link->dev, "labpc_config\n");
 
+	link->config_flags |= CONF_ENABLE_IRQ | CONF_ENABLE_PULSE_IRQ |
+		CONF_AUTO_AUDIO | CONF_AUTO_SET_IO;
+
 	ret = pcmcia_loop_config(link, labpc_pcmcia_config_loop, NULL);
 	if (ret) {
 		dev_warn(&link->dev, "no configuration found\n");
@@ -329,25 +232,10 @@ static void labpc_config(struct pcmcia_device *link)
 	if (!link->irq)
 		goto failed;
 
-	/*
-	   This actually configures the PCMCIA socket -- setting up
-	   the I/O windows and the interrupt mapping, and putting the
-	   card and host interface into "Memory and IO" mode.
-	 */
-	ret = pcmcia_request_configuration(link, &link->conf);
+	ret = pcmcia_enable_device(link);
 	if (ret)
 		goto failed;
 
-	/* Finally, report what we've done */
-	dev_info(&link->dev, "index 0x%02x", link->conf.ConfigIndex);
-	if (link->conf.Attributes & CONF_ENABLE_IRQ)
-		printk(", irq %d", link->irq);
-	if (link->resource[0])
-		printk(" & %pR", link->resource[0]);
-	if (link->resource[1])
-		printk(" & %pR", link->resource[1]);
-	printk("\n");
-
 	return;
 
 failed:
@@ -362,18 +250,6 @@ static void labpc_release(struct pcmcia_device *link)
 	pcmcia_disable_device(link);
 }				/* labpc_release */
 
-/*======================================================================
-
-    The card status event handler.  Mostly, this schedules other
-    stuff to run after an event is received.
-
-    When a CARD_REMOVAL event is received, we immediately set a
-    private flag to block future accesses to this device.  All the
-    functions that actually access the device should check this flag
-    to make sure the card is still present.
-
-======================================================================*/
-
 static int labpc_cs_suspend(struct pcmcia_device *link)
 {
 	struct local_info_t *local = link->priv;
@@ -391,8 +267,6 @@ static int labpc_cs_resume(struct pcmcia_device *link)
 	return 0;
 }				/* labpc_cs_resume */
 
-/*====================================================================*/
-
 static struct pcmcia_device_id labpc_cs_ids[] = {
 	/* N.B. These IDs should match those in labpc_cs_boards (ni_labpc.c) */
 	PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0103),	/* daqcard-1200 */
@@ -411,9 +285,7 @@ struct pcmcia_driver labpc_cs_driver = {
 	.resume = labpc_cs_resume,
 	.id_table = labpc_cs_ids,
 	.owner = THIS_MODULE,
-	.drv = {
-		.name = "daqcard-1200",
-		},
+	.name = "daqcard-1200",
 };
 
 static int __init init_labpc_cs(void)
diff --git a/drivers/staging/comedi/drivers/ni_mio_cs.c b/drivers/staging/comedi/drivers/ni_mio_cs.c
index 1f24263..4956327 100644
--- a/drivers/staging/comedi/drivers/ni_mio_cs.c
+++ b/drivers/staging/comedi/drivers/ni_mio_cs.c
@@ -48,7 +48,6 @@ See the notes in the ni_atmio.o driver.
 #include "ni_stc.h"
 #include "8255.h"
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
 
@@ -263,11 +262,6 @@ static struct pcmcia_device *cur_dev = NULL;
 
 static int cs_attach(struct pcmcia_device *link)
 {
-	link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
-	link->resource[0]->end = 16;
-	link->conf.Attributes = CONF_ENABLE_IRQ;
-	link->conf.IntType = INT_MEMORY_AND_IO;
-
 	cur_dev = link;
 
 	mio_cs_config(link);
@@ -301,16 +295,12 @@ static int mio_cs_resume(struct pcmcia_device *link)
 }
 
 
-static int mio_pcmcia_config_loop(struct pcmcia_device *p_dev,
-				cistpl_cftable_entry_t *cfg,
-				cistpl_cftable_entry_t *dflt,
-				unsigned int vcc,
-				void *priv_data)
+static int mio_pcmcia_config_loop(struct pcmcia_device *p_dev, void *priv_data)
 {
 	int base, ret;
 
-	p_dev->resource[0]->end = cfg->io.win[0].len;
-	p_dev->io_lines = cfg->io.flags & CISTPL_IO_LINES_MASK;
+	p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
 
 	for (base = 0x000; base < 0x400; base += 0x20) {
 		p_dev->resource[0]->start = base;
@@ -327,6 +317,7 @@ static void mio_cs_config(struct pcmcia_device *link)
 	int ret;
 
 	DPRINTK("mio_cs_config(link=%p)\n", link);
+	link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
 
 	ret = pcmcia_loop_config(link, mio_pcmcia_config_loop, NULL);
 	if (ret) {
@@ -337,7 +328,7 @@ static void mio_cs_config(struct pcmcia_device *link)
 	if (!link->irq)
 		dev_info(&link->dev, "no IRQ available\n");
 
-	ret = pcmcia_request_configuration(link, &link->conf);
+	ret = pcmcia_enable_device(link);
 }
 
 static int mio_cs_attach(struct comedi_device *dev, struct comedi_devconfig *it)
@@ -446,9 +437,7 @@ struct pcmcia_driver ni_mio_cs_driver = {
 	.resume = &mio_cs_resume,
 	.id_table = ni_mio_cs_ids,
 	.owner = THIS_MODULE,
-	.drv = {
-		.name = "ni_mio_cs",
-		},
+	.name = "ni_mio_cs",
 };
 
 int init_module(void)
diff --git a/drivers/staging/comedi/drivers/quatech_daqp_cs.c b/drivers/staging/comedi/drivers/quatech_daqp_cs.c
index bf489d7..ebba9bb 100644
--- a/drivers/staging/comedi/drivers/quatech_daqp_cs.c
+++ b/drivers/staging/comedi/drivers/quatech_daqp_cs.c
@@ -50,7 +50,6 @@ Devices: [Quatech] DAQP-208 (daqp), DAQP-308
 #include "../comedidev.h"
 #include <linux/semaphore.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/ds.h>
@@ -969,43 +968,14 @@ static int daqp_detach(struct comedi_device *dev)
 
 ======================================================================*/
 
-/*
-   The event() function is this driver's Card Services event handler.
-   It will be called by Card Services when an appropriate card status
-   event is received.  The config() and release() entry points are
-   used to configure or release a socket, in response to card
-   insertion and ejection events.
-
-   Kernel version 2.6.16 upwards uses suspend() and resume() functions
-   instead of an event() function.
-*/
-
 static void daqp_cs_config(struct pcmcia_device *link);
 static void daqp_cs_release(struct pcmcia_device *link);
 static int daqp_cs_suspend(struct pcmcia_device *p_dev);
 static int daqp_cs_resume(struct pcmcia_device *p_dev);
 
-/*
-   The attach() and detach() entry points are used to create and destroy
-   "instances" of the driver, where each instance represents everything
-   needed to manage one actual PCMCIA card.
-*/
-
 static int daqp_cs_attach(struct pcmcia_device *);
 static void daqp_cs_detach(struct pcmcia_device *);
 
-/*======================================================================
-
-    daqp_cs_attach() creates an "instance" of the driver, allocating
-    local data structures for one device.  The device is registered
-    with Card Services.
-
-    The dev_link structure is initialized, but we don't actually
-    configure the card at this point -- we wait until we receive a
-    card insertion event.
-
-======================================================================*/
-
 static int daqp_cs_attach(struct pcmcia_device *link)
 {
 	struct local_info_t *local;
@@ -1031,30 +1001,11 @@ static int daqp_cs_attach(struct pcmcia_device *link)
 	local->link = link;
 	link->priv = local;
 
-	/*
-	   General socket configuration defaults can go here.  In this
-	   client, we assume very little, and rely on the CIS for almost
-	   everything.  In most clients, many details (i.e., number, sizes,
-	   and attributes of IO windows) are fixed by the nature of the
-	   device, and can be hard-wired here.
-	 */
-	link->conf.Attributes = 0;
-	link->conf.IntType = INT_MEMORY_AND_IO;
-
 	daqp_cs_config(link);
 
 	return 0;
 }				/* daqp_cs_attach */
 
-/*======================================================================
-
-    This deletes a driver "instance".  The device is de-registered
-    with Card Services.  If it has been released, all local data
-    structures are freed.  Otherwise, the structures will be freed
-    when the device is released.
-
-======================================================================*/
-
 static void daqp_cs_detach(struct pcmcia_device *link)
 {
 	struct local_info_t *dev = link->priv;
@@ -1070,45 +1021,11 @@ static void daqp_cs_detach(struct pcmcia_device *link)
 
 }				/* daqp_cs_detach */
 
-/*======================================================================
-
-    daqp_cs_config() is scheduled to run after a CARD_INSERTION event
-    is received, to configure the PCMCIA socket, and to make the
-    device available to the system.
-
-======================================================================*/
-
-
-static int daqp_pcmcia_config_loop(struct pcmcia_device *p_dev,
-				cistpl_cftable_entry_t *cfg,
-				cistpl_cftable_entry_t *dflt,
-				unsigned int vcc,
-				void *priv_data)
+static int daqp_pcmcia_config_loop(struct pcmcia_device *p_dev, void *priv_data)
 {
-	if (cfg->index == 0)
-		return -ENODEV;
+	if (p_dev->config_index == 0)
+		return -EINVAL;
 
-	/* Do we need to allocate an interrupt? */
-	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
-
-	/* IO window settings */
-	p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
-	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
-		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
-		p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
-		p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
-		p_dev->resource[0]->flags |=
-			pcmcia_io_cfg_data_width(io->flags);
-		p_dev->resource[0]->start = io->win[0].base;
-		p_dev->resource[0]->end = io->win[0].len;
-		if (io->nwin > 1) {
-			p_dev->resource[1]->flags = p_dev->resource[0]->flags;
-			p_dev->resource[1]->start = io->win[1].base;
-			p_dev->resource[1]->end = io->win[1].len;
-		}
-	}
-
-	/* This reserves IO space but doesn't actually enable it */
 	return pcmcia_request_io(p_dev);
 }
 
@@ -1118,6 +1035,8 @@ static void daqp_cs_config(struct pcmcia_device *link)
 
 	dev_dbg(&link->dev, "daqp_cs_config\n");
 
+	link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
+
 	ret = pcmcia_loop_config(link, daqp_pcmcia_config_loop, NULL);
 	if (ret) {
 		dev_warn(&link->dev, "no configuration found\n");
@@ -1128,25 +1047,10 @@ static void daqp_cs_config(struct pcmcia_device *link)
 	if (ret)
 		goto failed;
 
-	/*
-	   This actually configures the PCMCIA socket -- setting up
-	   the I/O windows and the interrupt mapping, and putting the
-	   card and host interface into "Memory and IO" mode.
-	 */
-	ret = pcmcia_request_configuration(link, &link->conf);
+	ret = pcmcia_enable_device(link);
 	if (ret)
 		goto failed;
 
-	/* Finally, report what we've done */
-	dev_info(&link->dev, "index 0x%02x", link->conf.ConfigIndex);
-	if (link->conf.Attributes & CONF_ENABLE_IRQ)
-		printk(", irq %u", link->irq);
-	if (link->resource[0])
-		printk(" & %pR", link->resource[0]);
-	if (link->resource[1])
-		printk(" & %pR", link->resource[1]);
-	printk("\n");
-
 	return;
 
 failed:
@@ -1161,18 +1065,6 @@ static void daqp_cs_release(struct pcmcia_device *link)
 	pcmcia_disable_device(link);
 }				/* daqp_cs_release */
 
-/*======================================================================
-
-    The card status event handler.  Mostly, this schedules other
-    stuff to run after an event is received.
-
-    When a CARD_REMOVAL event is received, we immediately set a
-    private flag to block future accesses to this device.  All the
-    functions that actually access the device should check this flag
-    to make sure the card is still present.
-
-======================================================================*/
-
 static int daqp_cs_suspend(struct pcmcia_device *link)
 {
 	struct local_info_t *local = link->priv;
@@ -1212,9 +1104,7 @@ static struct pcmcia_driver daqp_cs_driver = {
 	.resume = daqp_cs_resume,
 	.id_table = daqp_cs_id_table,
 	.owner = THIS_MODULE,
-	.drv = {
-		.name = "quatech_daqp_cs",
-		},
+	.name = "quatech_daqp_cs",
 };
 
 int __init init_module(void)
diff --git a/drivers/staging/wlags49_h2/wl_cs.c b/drivers/staging/wlags49_h2/wl_cs.c
index 19c3354..6555891 100644
--- a/drivers/staging/wlags49_h2/wl_cs.c
+++ b/drivers/staging/wlags49_h2/wl_cs.c
@@ -83,7 +83,6 @@
 #include <linux/if_arp.h>
 #include <linux/ioport.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/ciscode.h>
@@ -147,10 +146,9 @@ static int wl_adapter_attach(struct pcmcia_device *link)
 
 	link->resource[0]->end  = HCF_NUM_IO_PORTS;
 	link->resource[0]->flags= IO_DATA_PATH_WIDTH_16;
-	link->conf.Attributes   = CONF_ENABLE_IRQ;
-	link->conf.IntType      = INT_MEMORY_AND_IO;
-	link->conf.ConfigIndex  = 5;
-	link->conf.Present      = PRESENT_OPTION;
+	link->config_flags     |= CONF_ENABLE_IRQ;
+	link->config_index      = 5;
+	link->config_regs       = PRESENT_OPTION;
 
 	link->priv = dev;
 	lp = wl_priv(dev);
@@ -165,27 +163,6 @@ static int wl_adapter_attach(struct pcmcia_device *link)
 
 
 
-/*******************************************************************************
- *	wl_adapter_detach()
- *******************************************************************************
- *
- *  DESCRIPTION:
- *
- *      This deletes a driver "instance". The device is de-registered with Card
- *  Services. If it has been released, then the net device is unregistered, and
- *  all local data structures are freed. Otherwise, the structures will be
- *  freed when the device is released.
- *
- *  PARAMETERS:
- *
- *      link    - pointer to the dev_link_t structure representing the device to
- *                detach
- *
- *  RETURNS:
- *
- *      N/A
- *
- ******************************************************************************/
 static void wl_adapter_detach(struct pcmcia_device *link)
 {
 	struct net_device   *dev = link->priv;
@@ -209,26 +186,6 @@ static void wl_adapter_detach(struct pcmcia_device *link)
 /*============================================================================*/
 
 
-/*******************************************************************************
- *	wl_adapter_release()
- *******************************************************************************
- *
- *  DESCRIPTION:
- *
- *      After a card is removed, this routine will release the PCMCIA
- *  configuration. If the device is still open, this will be postponed until it
- *  is closed.
- *
- *  PARAMETERS:
- *
- *      arg - a u_long representing a pointer to a dev_link_t structure for the
- *            device to be released.
- *
- *  RETURNS:
- *
- *      N/A
- *
- ******************************************************************************/
 void wl_adapter_release(struct pcmcia_device *link)
 {
 	DBG_FUNC("wl_adapter_release");
@@ -268,26 +225,6 @@ static int wl_adapter_resume(struct pcmcia_device *link)
 	return 0;
 } /* wl_adapter_resume */
 
-/*******************************************************************************
- *	wl_adapter_insert()
- *******************************************************************************
- *
- *  DESCRIPTION:
- *
- *      wl_adapter_insert() is scheduled to run after a CARD_INSERTION event is
- *  received, to configure the PCMCIA socket, and to make the ethernet device
- *  available to the system.
- *
- *  PARAMETERS:
- *
- *      link    - pointer to the dev_link_t structure representing the device to
- *                insert
- *
- *  RETURNS:
- *
- *      N/A
- *
- ******************************************************************************/
 void wl_adapter_insert(struct pcmcia_device *link)
 {
 	struct net_device *dev;
@@ -302,7 +239,7 @@ void wl_adapter_insert(struct pcmcia_device *link)
 	dev     = link->priv;
 
 	/* Do we need to allocate an interrupt? */
-	link->conf.Attributes |= CONF_ENABLE_IRQ;
+	link->config_flags |= CONF_ENABLE_IRQ;
 	link->io_lines = 6;
 
 	ret = pcmcia_request_io(link);
@@ -313,7 +250,7 @@ void wl_adapter_insert(struct pcmcia_device *link)
 	if (ret != 0)
 		goto failed;
 
-	ret = pcmcia_request_configuration(link, &link->conf);
+	ret = pcmcia_enable_device(link);
 	if (ret != 0)
 		goto failed;
 
@@ -457,9 +394,7 @@ MODULE_DEVICE_TABLE(pcmcia, wl_adapter_ids);
 
 static struct pcmcia_driver wlags49_driver = {
 	.owner	    = THIS_MODULE,
-	.drv	    = {
-		.name = DRIVER_NAME,
-	},
+	.name	    = DRIVER_NAME,
 	.probe	    = wl_adapter_attach,
 	.remove	    = wl_adapter_detach,
 	.id_table   = wl_adapter_ids,
diff --git a/drivers/staging/wlags49_h2/wl_internal.h b/drivers/staging/wlags49_h2/wl_internal.h
index 02f0a20..cd129b3 100644
--- a/drivers/staging/wlags49_h2/wl_internal.h
+++ b/drivers/staging/wlags49_h2/wl_internal.h
@@ -69,7 +69,6 @@
  ******************************************************************************/
 #include <linux/version.h>
 #ifdef BUS_PCMCIA
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/ciscode.h>
diff --git a/drivers/staging/wlags49_h2/wl_main.c b/drivers/staging/wlags49_h2/wl_main.c
index 88d0d47..8e3536a 100644
--- a/drivers/staging/wlags49_h2/wl_main.c
+++ b/drivers/staging/wlags49_h2/wl_main.c
@@ -414,25 +414,6 @@ extern memimage fw_image;            // firmware image to be downloaded
 #endif /* HCF_STA */
 
 
-/*******************************************************************************
- *	wl_insert()
- *******************************************************************************
- *
- *  DESCRIPTION:
- *
- *      wl_insert() is scheduled to run after a CARD_INSERTION event is
- *  received, to configure the PCMCIA socket, and to make the ethernet device
- *  available to the system.
- *
- *  PARAMETERS:
- *
- *      dev - a pointer to the net_device struct of the wireless device
- *
- *  RETURNS:
- *
- *      TRUE or FALSE
- *
- ******************************************************************************/
 int wl_insert( struct net_device *dev )
 {
 	int                     result = 0;