Merge remote branch 'rmk/for-linus' into for-linus

* rmk/for-linus: (1557 commits)
  ARM: 6806/1: irq: introduce entry and exit functions for chained handlers
  ARM: 6781/1: Thumb-2: Work around buggy Thumb-2 short branch relocations in gas
  ARM: 6747/1: P2V: Thumb2 support
  ARM: 6798/1: aout-core: zero thread debug registers in a.out core dump
  ARM: 6796/1: Footbridge: Fix I/O mappings for NOMMU mode
  ARM: 6784/1: errata: no automatic Store Buffer drain on Cortex-A9
  ARM: 6772/1: errata: possible fault MMU translations following an ASID switch
  ARM: 6776/1: mach-ux500: activate fix for errata 753970
  ARM: 6794/1: SPEAr: Append UL to device address macros.
  ARM: 6793/1: SPEAr: Remove unused *_SIZE macros from spear*.h files
  ARM: 6792/1: SPEAr: Replace SIZE macro's with SZ_4K macros
  ARM: 6791/1: SPEAr3xx: Declare device structures after shirq code
  ARM: 6790/1: SPEAr: Clock Framework: Rename usbd clock and align apb_clk entry
  ARM: 6789/1: SPEAr3xx: Rename sdio to sdhci
  ARM: 6788/1: SPEAr: Include mach/hardware.h instead of mach/spear.h
  ARM: 6787/1: SPEAr: Reorder #includes in .h & .c files.
  ARM: 6681/1: SPEAr: add debugfs support to clk API
  ARM: 6703/1: SPEAr: update clk API support
  ARM: 6679/1: SPEAr: make clk API functions more generic
  ARM: 6737/1: SPEAr: formalized timer support
  ...

Conflicts:
	arch/arm/mach-msm/board-msm7x27.c
	arch/arm/mach-msm/board-msm7x30.c
	arch/arm/mach-msm/board-qsd8x50.c
	arch/arm/mach-msm/board-sapphire.c
	arch/arm/mach-msm/include/mach/memory.h

9 files changed, 28 insertions, 28 deletions

diff --git a/drivers/tty/serial/68328serial.c b/drivers/tty/serial/68328serial.c
index be0ebce..de0160e 100644
--- a/drivers/tty/serial/68328serial.c
+++ b/drivers/tty/serial/68328serial.c
@@ -262,7 +262,7 @@ static void status_handle(struct m68k_serial *info, unsigned short status)
 
 static void receive_chars(struct m68k_serial *info, unsigned short rx)
 {
-	struct tty_struct *tty = info->port.tty;
+	struct tty_struct *tty = info->tty;
 	m68328_uart *uart = &uart_addr[info->line];
 	unsigned char ch, flag;
 
@@ -329,7 +329,7 @@ static void transmit_chars(struct m68k_serial *info)
 		goto clear_and_return;
 	}
 
-	if((info->xmit_cnt <= 0) || info->port.tty->stopped) {
+	if((info->xmit_cnt <= 0) || info->tty->stopped) {
 		/* That's peculiar... TX ints off */
 		uart->ustcnt &= ~USTCNT_TX_INTR_MASK;
 		goto clear_and_return;
@@ -383,7 +383,7 @@ static void do_softint(struct work_struct *work)
 	struct m68k_serial	*info = container_of(work, struct m68k_serial, tqueue);
 	struct tty_struct	*tty;
 	
-	tty = info->port.tty;
+	tty = info->tty;
 	if (!tty)
 		return;
 #if 0
@@ -407,7 +407,7 @@ static void do_serial_hangup(struct work_struct *work)
 	struct m68k_serial	*info = container_of(work, struct m68k_serial, tqueue_hangup);
 	struct tty_struct	*tty;
 	
-	tty = info->port.tty;
+	tty = info->tty;
 	if (!tty)
 		return;
 
@@ -451,8 +451,8 @@ static int startup(struct m68k_serial * info)
 	uart->ustcnt = USTCNT_UEN | USTCNT_RXEN | USTCNT_RX_INTR_MASK;
 #endif
 
-	if (info->port.tty)
-		clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
+	if (info->tty)
+		clear_bit(TTY_IO_ERROR, &info->tty->flags);
 	info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
 
 	/*
@@ -486,8 +486,8 @@ static void shutdown(struct m68k_serial * info)
 		info->xmit_buf = 0;
 	}
 
-	if (info->port.tty)
-		set_bit(TTY_IO_ERROR, &info->port.tty->flags);
+	if (info->tty)
+		set_bit(TTY_IO_ERROR, &info->tty->flags);
 	
 	info->flags &= ~S_INITIALIZED;
 	local_irq_restore(flags);
@@ -553,9 +553,9 @@ static void change_speed(struct m68k_serial *info)
 	unsigned cflag;
 	int	i;
 
-	if (!info->port.tty || !info->port.tty->termios)
+	if (!info->tty || !info->tty->termios)
 		return;
-	cflag = info->port.tty->termios->c_cflag;
+	cflag = info->tty->termios->c_cflag;
 	if (!(port = info->port))
 		return;
 
@@ -970,7 +970,6 @@ static void send_break(struct m68k_serial * info, unsigned int duration)
 static int rs_ioctl(struct tty_struct *tty, struct file * file,
 		    unsigned int cmd, unsigned long arg)
 {
-	int error;
 	struct m68k_serial * info = (struct m68k_serial *)tty->driver_data;
 	int retval;
 
@@ -1104,7 +1103,7 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
 	tty_ldisc_flush(tty);
 	tty->closing = 0;
 	info->event = 0;
-	info->port.tty = NULL;
+	info->tty = NULL;
 #warning "This is not and has never been valid so fix it"	
 #if 0
 	if (tty->ldisc.num != ldiscs[N_TTY].num) {
@@ -1142,7 +1141,7 @@ void rs_hangup(struct tty_struct *tty)
 	info->event = 0;
 	info->count = 0;
 	info->flags &= ~S_NORMAL_ACTIVE;
-	info->port.tty = NULL;
+	info->tty = NULL;
 	wake_up_interruptible(&info->open_wait);
 }
 
@@ -1261,7 +1260,7 @@ int rs_open(struct tty_struct *tty, struct file * filp)
 
 	info->count++;
 	tty->driver_data = info;
-	info->port.tty = tty;
+	info->tty = tty;
 
 	/*
 	 * Start up serial port
@@ -1338,7 +1337,7 @@ rs68328_init(void)
 	    info = &m68k_soft[i];
 	    info->magic = SERIAL_MAGIC;
 	    info->port = (int) &uart_addr[i];
-	    info->port.tty = NULL;
+	    info->tty = NULL;
 	    info->irq = uart_irqs[i];
 	    info->custom_divisor = 16;
 	    info->close_delay = 50;
diff --git a/drivers/tty/serial/68360serial.c b/drivers/tty/serial/68360serial.c
index 88b1335..bc21eea 100644
--- a/drivers/tty/serial/68360serial.c
+++ b/drivers/tty/serial/68360serial.c
@@ -2428,6 +2428,7 @@ static const struct tty_operations rs_360_ops = {
 	/* .read_proc = rs_360_read_proc, */
 	.tiocmget = rs_360_tiocmget,
 	.tiocmset = rs_360_tiocmset,
+	.get_icount = rs_360_get_icount,
 };
 
 static int __init rs_360_init(void)
diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c
index b25e6e4..3975df6 100644
--- a/drivers/tty/serial/8250.c
+++ b/drivers/tty/serial/8250.c
@@ -236,7 +236,8 @@ static const struct serial8250_config uart_config[] = {
 		.fifo_size	= 128,
 		.tx_loadsz	= 128,
 		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
-		.flags		= UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
+		/* UART_CAP_EFR breaks billionon CF bluetooth card. */
+		.flags		= UART_CAP_FIFO | UART_CAP_SLEEP,
 	},
 	[PORT_16654] = {
 		.name		= "ST16654",
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index b1682d7..2b83346 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1518,6 +1518,7 @@ config SERIAL_BCM63XX_CONSOLE
 config SERIAL_GRLIB_GAISLER_APBUART
 	tristate "GRLIB APBUART serial support"
 	depends on OF
+	select SERIAL_CORE
 	---help---
 	Add support for the GRLIB APBUART serial port.
 
diff --git a/drivers/tty/serial/bfin_5xx.c b/drivers/tty/serial/bfin_5xx.c
index e381b89..9b1ff2b 100644
--- a/drivers/tty/serial/bfin_5xx.c
+++ b/drivers/tty/serial/bfin_5xx.c
@@ -370,10 +370,8 @@ static irqreturn_t bfin_serial_rx_int(int irq, void *dev_id)
 {
 	struct bfin_serial_port *uart = dev_id;
 
-	spin_lock(&uart->port.lock);
 	while (UART_GET_LSR(uart) & DR)
 		bfin_serial_rx_chars(uart);
-	spin_unlock(&uart->port.lock);
 
 	return IRQ_HANDLED;
 }
@@ -490,9 +488,8 @@ void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart)
 {
 	int x_pos, pos;
 
-	dma_disable_irq(uart->tx_dma_channel);
-	dma_disable_irq(uart->rx_dma_channel);
-	spin_lock_bh(&uart->port.lock);
+	dma_disable_irq_nosync(uart->rx_dma_channel);
+	spin_lock_bh(&uart->rx_lock);
 
 	/* 2D DMA RX buffer ring is used. Because curr_y_count and
 	 * curr_x_count can't be read as an atomic operation,
@@ -523,8 +520,7 @@ void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart)
 		uart->rx_dma_buf.tail = uart->rx_dma_buf.head;
 	}
 
-	spin_unlock_bh(&uart->port.lock);
-	dma_enable_irq(uart->tx_dma_channel);
+	spin_unlock_bh(&uart->rx_lock);
 	dma_enable_irq(uart->rx_dma_channel);
 
 	mod_timer(&(uart->rx_dma_timer), jiffies + DMA_RX_FLUSH_JIFFIES);
@@ -571,7 +567,7 @@ static irqreturn_t bfin_serial_dma_rx_int(int irq, void *dev_id)
 	unsigned short irqstat;
 	int x_pos, pos;
 
-	spin_lock(&uart->port.lock);
+	spin_lock(&uart->rx_lock);
 	irqstat = get_dma_curr_irqstat(uart->rx_dma_channel);
 	clear_dma_irqstat(uart->rx_dma_channel);
 
@@ -589,7 +585,7 @@ static irqreturn_t bfin_serial_dma_rx_int(int irq, void *dev_id)
 		uart->rx_dma_buf.tail = uart->rx_dma_buf.head;
 	}
 
-	spin_unlock(&uart->port.lock);
+	spin_unlock(&uart->rx_lock);
 
 	return IRQ_HANDLED;
 }
@@ -1332,6 +1328,7 @@ static int bfin_serial_probe(struct platform_device *pdev)
 		}
 
 #ifdef CONFIG_SERIAL_BFIN_DMA
+		spin_lock_init(&uart->rx_lock);
 		uart->tx_done	    = 1;
 		uart->tx_count	    = 0;
 
diff --git a/drivers/tty/serial/max3100.c b/drivers/tty/serial/max3100.c
index beb1afa..7b951ad 100644
--- a/drivers/tty/serial/max3100.c
+++ b/drivers/tty/serial/max3100.c
@@ -601,7 +601,7 @@ static int max3100_startup(struct uart_port *port)
 	s->rts = 0;
 
 	sprintf(b, "max3100-%d", s->minor);
-	s->workqueue = create_freezeable_workqueue(b);
+	s->workqueue = create_freezable_workqueue(b);
 	if (!s->workqueue) {
 		dev_warn(&s->spi->dev, "cannot create workqueue\n");
 		return -EBUSY;
diff --git a/drivers/tty/serial/max3107.c b/drivers/tty/serial/max3107.c
index 910870e..750b4f6 100644
--- a/drivers/tty/serial/max3107.c
+++ b/drivers/tty/serial/max3107.c
@@ -833,7 +833,7 @@ static int max3107_startup(struct uart_port *port)
 	struct max3107_port *s = container_of(port, struct max3107_port, port);
 
 	/* Initialize work queue */
-	s->workqueue = create_freezeable_workqueue("max3107");
+	s->workqueue = create_freezable_workqueue("max3107");
 	if (!s->workqueue) {
 		dev_err(&s->spi->dev, "Workqueue creation failed\n");
 		return -EBUSY;
diff --git a/drivers/tty/serial/sb1250-duart.c b/drivers/tty/serial/sb1250-duart.c
index a2f2b32..602d984 100644
--- a/drivers/tty/serial/sb1250-duart.c
+++ b/drivers/tty/serial/sb1250-duart.c
@@ -829,7 +829,7 @@ static void __init sbd_probe_duarts(void)
 #ifdef CONFIG_SERIAL_SB1250_DUART_CONSOLE
 /*
  * Serial console stuff.  Very basic, polling driver for doing serial
- * console output.  The console_sem is held by the caller, so we
+ * console output.  The console_lock is held by the caller, so we
  * shouldn't be interrupted for more console activity.
  */
 static void sbd_console_putchar(struct uart_port *uport, int ch)
diff --git a/drivers/tty/serial/serial_cs.c b/drivers/tty/serial/serial_cs.c
index 93760b2..1ef4df9 100644
--- a/drivers/tty/serial/serial_cs.c
+++ b/drivers/tty/serial/serial_cs.c
@@ -712,6 +712,7 @@ static struct pcmcia_device_id serial_ids[] = {
 	PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf),
 	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0e01),
 	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0a05),
+	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0b05),
 	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x1101),
 	PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0104, 0x0070),
 	PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0101, 0x0562),