Merge branch 'master' into for-next

Conflicts:
	fs/exofs/inode.c

118 files changed, 4580 insertions, 1847 deletions

diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index 80b4008..239f050 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -41,7 +41,7 @@ obj-$(CONFIG_USB_MICROTEK)	+= image/
 obj-$(CONFIG_USB_SERIAL)	+= serial/
 
 obj-$(CONFIG_USB)		+= misc/
-obj-y				+= early/
+obj-$(CONFIG_EARLY_PRINTK_DBGP)	+= early/
 
 obj-$(CONFIG_USB_ATM)		+= atm/
 obj-$(CONFIG_USB_SPEEDTOUCH)	+= atm/
diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c
index 101ffc9..593fc5e 100644
--- a/drivers/usb/atm/cxacru.c
+++ b/drivers/usb/atm/cxacru.c
@@ -564,7 +564,7 @@ static void cxacru_timeout_kill(unsigned long data)
 }
 
 static int cxacru_start_wait_urb(struct urb *urb, struct completion *done,
-				 int* actual_length)
+				 int *actual_length)
 {
 	struct timer_list timer;
 
@@ -952,7 +952,7 @@ static int cxacru_fw(struct usb_device *usb_dev, enum cxacru_fw_request fw,
 		put_unaligned(cpu_to_le32(addr), (__le32 *)(buf + offb));
 		offb += 4;
 		addr += l;
-		if(l)
+		if (l)
 			memcpy(buf + offb, data + offd, l);
 		if (l < stride)
 			memset(buf + offb + l, 0, stride - l);
@@ -967,7 +967,7 @@ static int cxacru_fw(struct usb_device *usb_dev, enum cxacru_fw_request fw,
 			}
 			offb = 0;
 		}
-	} while(offd < size);
+	} while (offd < size);
 	dbg("sent fw %#x", fw);
 
 	ret = 0;
@@ -1043,8 +1043,7 @@ static void cxacru_upload_firmware(struct cxacru_data *instance,
 	if (instance->modem_type->boot_rom_patch) {
 		val = cpu_to_le32(BR_ADDR);
 		ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, BR_STACK_ADDR, (u8 *) &val, 4);
-	}
-	else {
+	} else {
 		ret = cxacru_fw(usb_dev, FW_GOTO_MEM, 0x0, 0x0, FW_ADDR, NULL, 0);
 	}
 	if (ret) {
@@ -1068,7 +1067,7 @@ static void cxacru_upload_firmware(struct cxacru_data *instance,
 }
 
 static int cxacru_find_firmware(struct cxacru_data *instance,
-				char* phase, const struct firmware **fw_p)
+				char *phase, const struct firmware **fw_p)
 {
 	struct usbatm_data *usbatm = instance->usbatm;
 	struct device *dev = &usbatm->usb_intf->dev;
diff --git a/drivers/usb/atm/speedtch.c b/drivers/usb/atm/speedtch.c
index 80f9617..4716e70 100644
--- a/drivers/usb/atm/speedtch.c
+++ b/drivers/usb/atm/speedtch.c
@@ -753,11 +753,13 @@ static struct usb_driver speedtch_usb_driver = {
 	.id_table	= speedtch_usb_ids
 };
 
-static void speedtch_release_interfaces(struct usb_device *usb_dev, int num_interfaces) {
+static void speedtch_release_interfaces(struct usb_device *usb_dev,
+					int num_interfaces)
+{
 	struct usb_interface *cur_intf;
 	int i;
 
-	for(i = 0; i < num_interfaces; i++)
+	for (i = 0; i < num_interfaces; i++)
 		if ((cur_intf = usb_ifnum_to_if(usb_dev, i))) {
 			usb_set_intfdata(cur_intf, NULL);
 			usb_driver_release_interface(&speedtch_usb_driver, cur_intf);
@@ -792,7 +794,7 @@ static int speedtch_bind(struct usbatm_data *usbatm,
 
 	/* claim all interfaces */
 
-	for (i=0; i < num_interfaces; i++) {
+	for (i = 0; i < num_interfaces; i++) {
 		cur_intf = usb_ifnum_to_if(usb_dev, i);
 
 		if ((i != ifnum) && cur_intf) {
@@ -842,7 +844,7 @@ static int speedtch_bind(struct usbatm_data *usbatm,
 
 		use_isoc = 0; /* fall back to bulk if endpoint not found */
 
-		for (i=0; i<desc->desc.bNumEndpoints; i++) {
+		for (i = 0; i < desc->desc.bNumEndpoints; i++) {
 			const struct usb_endpoint_descriptor *endpoint_desc = &desc->endpoint[i].desc;
 
 			if ((endpoint_desc->bEndpointAddress == target_address)) {
diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
index ebae944..5b3f555 100644
--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -67,6 +67,7 @@
 #include <linux/mutex.h>
 #include <linux/freezer.h>
 #include <linux/slab.h>
+#include <linux/kernel.h>
 
 #include <asm/unaligned.h>
 
@@ -2436,7 +2437,6 @@ UEA_ATTR(firmid, 0);
 
 /* Retrieve the device End System Identifier (MAC) */
 
-#define htoi(x) (isdigit(x) ? x-'0' : toupper(x)-'A'+10)
 static int uea_getesi(struct uea_softc *sc, u_char * esi)
 {
 	unsigned char mac_str[2 * ETH_ALEN + 1];
@@ -2447,7 +2447,8 @@ static int uea_getesi(struct uea_softc *sc, u_char * esi)
 		return 1;
 
 	for (i = 0; i < ETH_ALEN; i++)
-		esi[i] = htoi(mac_str[2 * i]) * 16 + htoi(mac_str[2 * i + 1]);
+		esi[i] = hex_to_bin(mac_str[2 * i]) * 16 +
+			 hex_to_bin(mac_str[2 * i + 1]);
 
 	return 0;
 }
diff --git a/drivers/usb/atm/usbatm.c b/drivers/usb/atm/usbatm.c
index 9b53e8d..05bf5a2 100644
--- a/drivers/usb/atm/usbatm.c
+++ b/drivers/usb/atm/usbatm.c
@@ -84,8 +84,8 @@
 
 #ifdef VERBOSE_DEBUG
 static int usbatm_print_packet(const unsigned char *data, int len);
-#define PACKETDEBUG(arg...)	usbatm_print_packet (arg)
-#define vdbg(arg...)		dbg (arg)
+#define PACKETDEBUG(arg...)	usbatm_print_packet(arg)
+#define vdbg(arg...)		dbg(arg)
 #else
 #define PACKETDEBUG(arg...)
 #define vdbg(arg...)
@@ -273,8 +273,7 @@ static void usbatm_complete(struct urb *urb)
 
 	if (unlikely(status) &&
 			(!(channel->usbatm->flags & UDSL_IGNORE_EILSEQ) ||
-			 status != -EILSEQ ))
-	{
+			 status != -EILSEQ)) {
 		if (status == -ESHUTDOWN)
 			return;
 
@@ -494,7 +493,7 @@ static unsigned int usbatm_write_cells(struct usbatm_data *instance,
 		ptr += data_len;
 		__skb_pull(skb, data_len);
 
-		if(!left)
+		if (!left)
 			continue;
 
 		memset(ptr, 0, left);
@@ -506,7 +505,7 @@ static unsigned int usbatm_write_cells(struct usbatm_data *instance,
 			trailer[2] = ctrl->len >> 8;
 			trailer[3] = ctrl->len;
 
-			ctrl->crc = ~ crc32_be(ctrl->crc, ptr, left - 4);
+			ctrl->crc = ~crc32_be(ctrl->crc, ptr, left - 4);
 
 			trailer[4] = ctrl->crc >> 24;
 			trailer[5] = ctrl->crc >> 16;
@@ -516,8 +515,7 @@ static unsigned int usbatm_write_cells(struct usbatm_data *instance,
 			target[3] |= 0x2;	/* adjust PTI */
 
 			ctrl->len = 0;		/* tag this skb finished */
-		}
-		else
+		} else
 			ctrl->crc = crc32_be(ctrl->crc, ptr, left);
 	}
 
@@ -1146,7 +1144,7 @@ int usbatm_usb_probe(struct usb_interface *intf, const struct usb_device_id *id,
 	instance->tx_channel.endpoint = usb_sndbulkpipe(usb_dev, driver->bulk_out);
 
 	/* tx buffer size must be a positive multiple of the stride */
-	instance->tx_channel.buf_size = max (instance->tx_channel.stride,
+	instance->tx_channel.buf_size = max(instance->tx_channel.stride,
 			snd_buf_bytes - (snd_buf_bytes % instance->tx_channel.stride));
 
 	/* rx buffer size must be a positive multiple of the endpoint maxpacket */
@@ -1159,7 +1157,7 @@ int usbatm_usb_probe(struct usb_interface *intf, const struct usb_device_id *id,
 		goto fail_unbind;
 	}
 
-	num_packets = max (1U, (rcv_buf_bytes + maxpacket / 2) / maxpacket); /* round */
+	num_packets = max(1U, (rcv_buf_bytes + maxpacket / 2) / maxpacket); /* round */
 
 	if (num_packets * maxpacket > UDSL_MAX_BUF_SIZE)
 		num_packets--;
@@ -1262,7 +1260,7 @@ int usbatm_usb_probe(struct usb_interface *intf, const struct usb_device_id *id,
 		usb_free_urb(instance->urbs[i]);
 	}
 
-	kfree (instance);
+	kfree(instance);
 
 	return error;
 }
@@ -1390,9 +1388,8 @@ static int usbatm_print_packet(const unsigned char *data, int len)
 	for (i = 0; i < len;) {
 		buffer[0] = '\0';
 		sprintf(buffer, "%.3d :", i);
-		for (j = 0; (j < 16) && (i < len); j++, i++) {
+		for (j = 0; (j < 16) && (i < len); j++, i++)
 			sprintf(buffer, "%s %2.2x", buffer, data[i]);
-		}
 		dbg("%s", buffer);
 	}
 	return i;
diff --git a/drivers/usb/atm/usbatm.h b/drivers/usb/atm/usbatm.h
index 0863f85..5fc4894 100644
--- a/drivers/usb/atm/usbatm.h
+++ b/drivers/usb/atm/usbatm.h
@@ -48,7 +48,7 @@
 			dev_warn(&(instance)->usb_intf->dev,		\
 				 "failed assertion '%s' at line %d",	\
 				 __stringify(x), __LINE__);		\
-	} while(0)
+	} while (0)
 #endif
 
 #define usb_err(instance, format, arg...)	\
@@ -59,7 +59,7 @@
 	dev_warn(&(instance)->usb_intf->dev , format , ## arg)
 #ifdef DEBUG
 #define usb_dbg(instance, format, arg...)	\
-        dev_printk(KERN_DEBUG , &(instance)->usb_intf->dev , format , ## arg)
+	dev_printk(KERN_DEBUG , &(instance)->usb_intf->dev , format , ## arg)
 #else
 #define usb_dbg(instance, format, arg...)	\
 	do {} while (0)
@@ -104,21 +104,21 @@ struct usbatm_data;
 /*
 *  Assuming all methods exist and succeed, they are called in this order:
 *
-*  	bind, heavy_init, atm_start, ..., atm_stop, unbind
+*	bind, heavy_init, atm_start, ..., atm_stop, unbind
 */
 
 struct usbatm_driver {
 	const char *driver_name;
 
 	/* init device ... can sleep, or cause probe() failure */
-        int (*bind) (struct usbatm_data *, struct usb_interface *,
+	int (*bind) (struct usbatm_data *, struct usb_interface *,
 		     const struct usb_device_id *id);
 
 	/* additional device initialization that is too slow to be done in probe() */
-        int (*heavy_init) (struct usbatm_data *, struct usb_interface *);
+	int (*heavy_init) (struct usbatm_data *, struct usb_interface *);
 
 	/* cleanup device ... can sleep, but can't fail */
-        void (*unbind) (struct usbatm_data *, struct usb_interface *);
+	void (*unbind) (struct usbatm_data *, struct usb_interface *);
 
 	/* init ATM device ... can sleep, or cause ATM initialization failure */
 	int (*atm_start) (struct usbatm_data *, struct atm_dev *);
@@ -126,9 +126,9 @@ struct usbatm_driver {
 	/* cleanup ATM device ... can sleep, but can't fail */
 	void (*atm_stop) (struct usbatm_data *, struct atm_dev *);
 
-        int bulk_in;	/* bulk rx endpoint */
-        int isoc_in;	/* isochronous rx endpoint */
-        int bulk_out;	/* bulk tx endpoint */
+	int bulk_in;	/* bulk rx endpoint */
+	int isoc_in;	/* isochronous rx endpoint */
+	int bulk_out;	/* bulk tx endpoint */
 
 	unsigned rx_padding;
 	unsigned tx_padding;
@@ -156,7 +156,7 @@ struct usbatm_channel {
 struct usbatm_data {
 	/******************
 	*  public fields  *
-        ******************/
+	******************/
 
 	/* mini driver */
 	struct usbatm_driver *driver;
@@ -174,7 +174,7 @@ struct usbatm_data {
 
 	/********************************
 	*  private fields - do not use  *
-        ********************************/
+	********************************/
 
 	struct kref refcount;
 	struct mutex serialize;
diff --git a/drivers/usb/atm/xusbatm.c b/drivers/usb/atm/xusbatm.c
index 17d167b..48ee0c5 100644
--- a/drivers/usb/atm/xusbatm.c
+++ b/drivers/usb/atm/xusbatm.c
@@ -49,13 +49,13 @@ static struct usbatm_driver xusbatm_drivers[XUSBATM_DRIVERS_MAX];
 static struct usb_device_id xusbatm_usb_ids[XUSBATM_DRIVERS_MAX + 1];
 static struct usb_driver xusbatm_usb_driver;
 
-static struct usb_interface *xusbatm_find_intf (struct usb_device *usb_dev, int altsetting, u8 ep)
+static struct usb_interface *xusbatm_find_intf(struct usb_device *usb_dev, int altsetting, u8 ep)
 {
 	struct usb_host_interface *alt;
 	struct usb_interface *intf;
 	int i, j;
 
-	for(i = 0; i < usb_dev->actconfig->desc.bNumInterfaces; i++)
+	for (i = 0; i < usb_dev->actconfig->desc.bNumInterfaces; i++)
 		if ((intf = usb_dev->actconfig->interface[i]) && (alt = usb_altnum_to_altsetting(intf, altsetting)))
 			for (j = 0; j < alt->desc.bNumEndpoints; j++)
 				if (alt->endpoint[j].desc.bEndpointAddress == ep)
@@ -63,7 +63,7 @@ static struct usb_interface *xusbatm_find_intf (struct usb_device *usb_dev, int
 	return NULL;
 }
 
-static int xusbatm_capture_intf (struct usbatm_data *usbatm, struct usb_device *usb_dev,
+static int xusbatm_capture_intf(struct usbatm_data *usbatm, struct usb_device *usb_dev,
 		struct usb_interface *intf, int altsetting, int claim)
 {
 	int ifnum = intf->altsetting->desc.bInterfaceNumber;
@@ -80,7 +80,7 @@ static int xusbatm_capture_intf (struct usbatm_data *usbatm, struct usb_device *
 	return 0;
 }
 
-static void xusbatm_release_intf (struct usb_device *usb_dev, struct usb_interface *intf, int claimed)
+static void xusbatm_release_intf(struct usb_device *usb_dev, struct usb_interface *intf, int claimed)
 {
 	if (claimed) {
 		usb_set_intfdata(intf, NULL);
@@ -147,7 +147,7 @@ static void xusbatm_unbind(struct usbatm_data *usbatm,
 
 	usb_dbg(usbatm, "%s entered\n", __func__);
 
-	for(i = 0; i < usb_dev->actconfig->desc.bNumInterfaces; i++) {
+	for (i = 0; i < usb_dev->actconfig->desc.bNumInterfaces; i++) {
 		struct usb_interface *cur_intf = usb_dev->actconfig->interface[i];
 
 		if (cur_intf && (usb_get_intfdata(cur_intf) == usbatm)) {
diff --git a/drivers/usb/c67x00/c67x00-hcd.c b/drivers/usb/c67x00/c67x00-hcd.c
index a22b887..d3e1356 100644
--- a/drivers/usb/c67x00/c67x00-hcd.c
+++ b/drivers/usb/c67x00/c67x00-hcd.c
@@ -264,7 +264,7 @@ static void c67x00_hcd_irq(struct c67x00_sie *sie, u16 int_status, u16 msg)
 	if (unlikely(hcd->state == HC_STATE_HALT))
 		return;
 
-	if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))
+	if (!HCD_HW_ACCESSIBLE(hcd))
 		return;
 
 	/* Handle Start of frame events */
@@ -282,7 +282,7 @@ static int c67x00_hcd_start(struct usb_hcd *hcd)
 {
 	hcd->uses_new_polling = 1;
 	hcd->state = HC_STATE_RUNNING;
-	hcd->poll_rh = 1;
+	set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
 
 	return 0;
 }
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 89d260d..1833b3a 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -636,19 +636,13 @@ static void acm_tty_unregister(struct acm *acm)
 
 static int acm_tty_chars_in_buffer(struct tty_struct *tty);
 
-static void acm_port_down(struct acm *acm, int drain)
+static void acm_port_down(struct acm *acm)
 {
 	int i, nr = acm->rx_buflimit;
 	mutex_lock(&open_mutex);
 	if (acm->dev) {
 		usb_autopm_get_interface(acm->control);
 		acm_set_control(acm, acm->ctrlout = 0);
-		/* try letting the last writes drain naturally */
-		if (drain) {
-			wait_event_interruptible_timeout(acm->drain_wait,
-				(ACM_NW == acm_wb_is_avail(acm)) || !acm->dev,
-					ACM_CLOSE_TIMEOUT * HZ);
-		}
 		usb_kill_urb(acm->ctrlurb);
 		for (i = 0; i < ACM_NW; i++)
 			usb_kill_urb(acm->wb[i].urb);
@@ -664,7 +658,7 @@ static void acm_tty_hangup(struct tty_struct *tty)
 {
 	struct acm *acm = tty->driver_data;
 	tty_port_hangup(&acm->port);
-	acm_port_down(acm, 0);
+	acm_port_down(acm);
 }
 
 static void acm_tty_close(struct tty_struct *tty, struct file *filp)
@@ -685,7 +679,7 @@ static void acm_tty_close(struct tty_struct *tty, struct file *filp)
 		mutex_unlock(&open_mutex);
 		return;
 	}
-	acm_port_down(acm, 0);
+	acm_port_down(acm);
 	tty_port_close_end(&acm->port, tty);
 	tty_port_tty_set(&acm->port, NULL);
 }
diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c
index 84f9e52..e325162 100644
--- a/drivers/usb/class/usblp.c
+++ b/drivers/usb/class/usblp.c
@@ -135,7 +135,7 @@ MFG:HEWLETT-PACKARD;MDL:DESKJET 970C;CMD:MLC,PCL,PML;CLASS:PRINTER;DESCRIPTION:H
  * ->lock locks what interrupt accesses.
  */
 struct usblp {
-	struct usb_device 	*dev;			/* USB device */
+	struct usb_device	*dev;			/* USB device */
 	struct mutex		wmut;
 	struct mutex		mut;
 	spinlock_t		lock;		/* locks rcomplete, wcomplete */
@@ -169,7 +169,8 @@ struct usblp {
 };
 
 #ifdef DEBUG
-static void usblp_dump(struct usblp *usblp) {
+static void usblp_dump(struct usblp *usblp)
+{
 	int p;
 
 	dbg("usblp=0x%p", usblp);
@@ -216,8 +217,8 @@ static const struct quirk_printer_struct quirk_printers[] = {
 	{ 0x03f0, 0x0304, USBLP_QUIRK_BIDIR }, /* HP DeskJet 810C/812C */
 	{ 0x03f0, 0x0404, USBLP_QUIRK_BIDIR }, /* HP DeskJet 830C */
 	{ 0x03f0, 0x0504, USBLP_QUIRK_BIDIR }, /* HP DeskJet 885C */
-	{ 0x03f0, 0x0604, USBLP_QUIRK_BIDIR }, /* HP DeskJet 840C */   
-	{ 0x03f0, 0x0804, USBLP_QUIRK_BIDIR }, /* HP DeskJet 816C */   
+	{ 0x03f0, 0x0604, USBLP_QUIRK_BIDIR }, /* HP DeskJet 840C */
+	{ 0x03f0, 0x0804, USBLP_QUIRK_BIDIR }, /* HP DeskJet 816C */
 	{ 0x03f0, 0x1104, USBLP_QUIRK_BIDIR }, /* HP Deskjet 959C */
 	{ 0x0409, 0xefbe, USBLP_QUIRK_BIDIR }, /* NEC Picty900 (HP OEM) */
 	{ 0x0409, 0xbef4, USBLP_QUIRK_BIDIR }, /* NEC Picty760 (HP OEM) */
@@ -254,9 +255,8 @@ static int usblp_ctrl_msg(struct usblp *usblp, int request, int type, int dir, i
 	/* High byte has the interface index.
 	   Low byte has the alternate setting.
 	 */
-	if ((request == USBLP_REQ_GET_ID) && (type == USB_TYPE_CLASS)) {
-	  index = (usblp->ifnum<<8)|usblp->protocol[usblp->current_protocol].alt_setting;
-	}
+	if ((request == USBLP_REQ_GET_ID) && (type == USB_TYPE_CLASS))
+		index = (usblp->ifnum<<8)|usblp->protocol[usblp->current_protocol].alt_setting;
 
 	retval = usb_control_msg(usblp->dev,
 		dir ? usb_rcvctrlpipe(usblp->dev, 0) : usb_sndctrlpipe(usblp->dev, 0),
@@ -372,7 +372,7 @@ static int usblp_check_status(struct usblp *usblp, int err)
 	return newerr;
 }
 
-static int handle_bidir (struct usblp *usblp)
+static int handle_bidir(struct usblp *usblp)
 {
 	if (usblp->bidir && usblp->used) {
 		if (usblp_submit_read(usblp) < 0)
@@ -395,14 +395,13 @@ static int usblp_open(struct inode *inode, struct file *file)
 	if (minor < 0)
 		return -ENODEV;
 
-	mutex_lock (&usblp_mutex);
+	mutex_lock(&usblp_mutex);
 
 	retval = -ENODEV;
 	intf = usb_find_interface(&usblp_driver, minor);
-	if (!intf) {
+	if (!intf)
 		goto out;
-	}
-	usblp = usb_get_intfdata (intf);
+	usblp = usb_get_intfdata(intf);
 	if (!usblp || !usblp->dev || !usblp->present)
 		goto out;
 
@@ -433,18 +432,18 @@ static int usblp_open(struct inode *inode, struct file *file)
 		retval = -EIO;
 	}
 out:
-	mutex_unlock (&usblp_mutex);
+	mutex_unlock(&usblp_mutex);
 	return retval;
 }
 
-static void usblp_cleanup (struct usblp *usblp)
+static void usblp_cleanup(struct usblp *usblp)
 {
 	printk(KERN_INFO "usblp%d: removed\n", usblp->minor);
 
 	kfree(usblp->readbuf);
-	kfree (usblp->device_id_string);
-	kfree (usblp->statusbuf);
-	kfree (usblp);
+	kfree(usblp->device_id_string);
+	kfree(usblp->statusbuf);
+	kfree(usblp);
 }
 
 static void usblp_unlink_urbs(struct usblp *usblp)
@@ -458,14 +457,14 @@ static int usblp_release(struct inode *inode, struct file *file)
 
 	usblp->flags &= ~LP_ABORT;
 
-	mutex_lock (&usblp_mutex);
+	mutex_lock(&usblp_mutex);
 	usblp->used = 0;
 	if (usblp->present) {
 		usblp_unlink_urbs(usblp);
 		usb_autopm_put_interface(usblp->intf);
-	} else 		/* finish cleanup from disconnect */
-		usblp_cleanup (usblp);
-	mutex_unlock (&usblp_mutex);
+	} else		/* finish cleanup from disconnect */
+		usblp_cleanup(usblp);
+	mutex_unlock(&usblp_mutex);
 	return 0;
 }
 
@@ -495,190 +494,190 @@ static long usblp_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	int twoints[2];
 	int retval = 0;
 
-	mutex_lock (&usblp->mut);
+	mutex_lock(&usblp->mut);
 	if (!usblp->present) {
 		retval = -ENODEV;
 		goto done;
 	}
 
 	dbg("usblp_ioctl: cmd=0x%x (%c nr=%d len=%d dir=%d)", cmd, _IOC_TYPE(cmd),
-		_IOC_NR(cmd), _IOC_SIZE(cmd), _IOC_DIR(cmd) );
+		_IOC_NR(cmd), _IOC_SIZE(cmd), _IOC_DIR(cmd));
 
 	if (_IOC_TYPE(cmd) == 'P')	/* new-style ioctl number */
 
 		switch (_IOC_NR(cmd)) {
 
-			case IOCNR_GET_DEVICE_ID: /* get the DEVICE_ID string */
-				if (_IOC_DIR(cmd) != _IOC_READ) {
-					retval = -EINVAL;
-					goto done;
-				}
+		case IOCNR_GET_DEVICE_ID: /* get the DEVICE_ID string */
+			if (_IOC_DIR(cmd) != _IOC_READ) {
+				retval = -EINVAL;
+				goto done;
+			}
 
-				length = usblp_cache_device_id_string(usblp);
-				if (length < 0) {
-					retval = length;
-					goto done;
-				}
-				if (length > _IOC_SIZE(cmd))
-					length = _IOC_SIZE(cmd); /* truncate */
-
-				if (copy_to_user((void __user *) arg,
-						usblp->device_id_string,
-						(unsigned long) length)) {
-					retval = -EFAULT;
-					goto done;
-				}
+			length = usblp_cache_device_id_string(usblp);
+			if (length < 0) {
+				retval = length;
+				goto done;
+			}
+			if (length > _IOC_SIZE(cmd))
+				length = _IOC_SIZE(cmd); /* truncate */
+
+			if (copy_to_user((void __user *) arg,
+					usblp->device_id_string,
+					(unsigned long) length)) {
+				retval = -EFAULT;
+				goto done;
+			}
 
-				break;
+			break;
 
-			case IOCNR_GET_PROTOCOLS:
-				if (_IOC_DIR(cmd) != _IOC_READ ||
-				    _IOC_SIZE(cmd) < sizeof(twoints)) {
-					retval = -EINVAL;
-					goto done;
-				}
+		case IOCNR_GET_PROTOCOLS:
+			if (_IOC_DIR(cmd) != _IOC_READ ||
+			    _IOC_SIZE(cmd) < sizeof(twoints)) {
+				retval = -EINVAL;
+				goto done;
+			}
 
-				twoints[0] = usblp->current_protocol;
-				twoints[1] = 0;
-				for (i = USBLP_FIRST_PROTOCOL;
-				     i <= USBLP_LAST_PROTOCOL; i++) {
-					if (usblp->protocol[i].alt_setting >= 0)
-						twoints[1] |= (1<<i);
-				}
+			twoints[0] = usblp->current_protocol;
+			twoints[1] = 0;
+			for (i = USBLP_FIRST_PROTOCOL;
+			     i <= USBLP_LAST_PROTOCOL; i++) {
+				if (usblp->protocol[i].alt_setting >= 0)
+					twoints[1] |= (1<<i);
+			}
 
-				if (copy_to_user((void __user *)arg,
-						(unsigned char *)twoints,
-						sizeof(twoints))) {
-					retval = -EFAULT;
-					goto done;
-				}
+			if (copy_to_user((void __user *)arg,
+					(unsigned char *)twoints,
+					sizeof(twoints))) {
+				retval = -EFAULT;
+				goto done;
+			}
 
-				break;
+			break;
 
-			case IOCNR_SET_PROTOCOL:
-				if (_IOC_DIR(cmd) != _IOC_WRITE) {
-					retval = -EINVAL;
-					goto done;
-				}
+		case IOCNR_SET_PROTOCOL:
+			if (_IOC_DIR(cmd) != _IOC_WRITE) {
+				retval = -EINVAL;
+				goto done;
+			}
 
 #ifdef DEBUG
-				if (arg == -10) {
-					usblp_dump(usblp);
-					break;
-				}
+			if (arg == -10) {
+				usblp_dump(usblp);
+				break;
+			}
 #endif
 
-				usblp_unlink_urbs(usblp);
-				retval = usblp_set_protocol(usblp, arg);
-				if (retval < 0) {
-					usblp_set_protocol(usblp,
-						usblp->current_protocol);
-				}
-				break;
+			usblp_unlink_urbs(usblp);
+			retval = usblp_set_protocol(usblp, arg);
+			if (retval < 0) {
+				usblp_set_protocol(usblp,
+					usblp->current_protocol);
+			}
+			break;
 
-			case IOCNR_HP_SET_CHANNEL:
-				if (_IOC_DIR(cmd) != _IOC_WRITE ||
-				    le16_to_cpu(usblp->dev->descriptor.idVendor) != 0x03F0 ||
-				    usblp->quirks & USBLP_QUIRK_BIDIR) {
-					retval = -EINVAL;
-					goto done;
-				}
+		case IOCNR_HP_SET_CHANNEL:
+			if (_IOC_DIR(cmd) != _IOC_WRITE ||
+			    le16_to_cpu(usblp->dev->descriptor.idVendor) != 0x03F0 ||
+			    usblp->quirks & USBLP_QUIRK_BIDIR) {
+				retval = -EINVAL;
+				goto done;
+			}
 
-				err = usblp_hp_channel_change_request(usblp,
-					arg, &newChannel);
-				if (err < 0) {
-					dev_err(&usblp->dev->dev,
-						"usblp%d: error = %d setting "
-						"HP channel\n",
-						usblp->minor, err);
-					retval = -EIO;
-					goto done;
-				}
+			err = usblp_hp_channel_change_request(usblp,
+				arg, &newChannel);
+			if (err < 0) {
+				dev_err(&usblp->dev->dev,
+					"usblp%d: error = %d setting "
+					"HP channel\n",
+					usblp->minor, err);
+				retval = -EIO;
+				goto done;
+			}
 
-				dbg("usblp%d requested/got HP channel %ld/%d",
-					usblp->minor, arg, newChannel);
-				break;
+			dbg("usblp%d requested/got HP channel %ld/%d",
+				usblp->minor, arg, newChannel);
+			break;
 
-			case IOCNR_GET_BUS_ADDRESS:
-				if (_IOC_DIR(cmd) != _IOC_READ ||
-				    _IOC_SIZE(cmd) < sizeof(twoints)) {
-					retval = -EINVAL;
-					goto done;
-				}
+		case IOCNR_GET_BUS_ADDRESS:
+			if (_IOC_DIR(cmd) != _IOC_READ ||
+			    _IOC_SIZE(cmd) < sizeof(twoints)) {
+				retval = -EINVAL;
+				goto done;
+			}
 
-				twoints[0] = usblp->dev->bus->busnum;
-				twoints[1] = usblp->dev->devnum;
-				if (copy_to_user((void __user *)arg,
-						(unsigned char *)twoints,
-						sizeof(twoints))) {
-					retval = -EFAULT;
-					goto done;
-				}
+			twoints[0] = usblp->dev->bus->busnum;
+			twoints[1] = usblp->dev->devnum;
+			if (copy_to_user((void __user *)arg,
+					(unsigned char *)twoints,
+					sizeof(twoints))) {
+				retval = -EFAULT;
+				goto done;
+			}
 
-				dbg("usblp%d is bus=%d, device=%d",
-					usblp->minor, twoints[0], twoints[1]);
-				break;
+			dbg("usblp%d is bus=%d, device=%d",
+				usblp->minor, twoints[0], twoints[1]);
+			break;
 
-			case IOCNR_GET_VID_PID:
-				if (_IOC_DIR(cmd) != _IOC_READ ||
-				    _IOC_SIZE(cmd) < sizeof(twoints)) {
-					retval = -EINVAL;
-					goto done;
-				}
+		case IOCNR_GET_VID_PID:
+			if (_IOC_DIR(cmd) != _IOC_READ ||
+			    _IOC_SIZE(cmd) < sizeof(twoints)) {
+				retval = -EINVAL;
+				goto done;
+			}
 
-				twoints[0] = le16_to_cpu(usblp->dev->descriptor.idVendor);
-				twoints[1] = le16_to_cpu(usblp->dev->descriptor.idProduct);
-				if (copy_to_user((void __user *)arg,
-						(unsigned char *)twoints,
-						sizeof(twoints))) {
-					retval = -EFAULT;
-					goto done;
-				}
+			twoints[0] = le16_to_cpu(usblp->dev->descriptor.idVendor);
+			twoints[1] = le16_to_cpu(usblp->dev->descriptor.idProduct);
+			if (copy_to_user((void __user *)arg,
+					(unsigned char *)twoints,
+					sizeof(twoints))) {
+				retval = -EFAULT;
+				goto done;
+			}
 
-				dbg("usblp%d is VID=0x%4.4X, PID=0x%4.4X",
-					usblp->minor, twoints[0], twoints[1]);
-				break;
+			dbg("usblp%d is VID=0x%4.4X, PID=0x%4.4X",
+				usblp->minor, twoints[0], twoints[1]);
+			break;
 
-			case IOCNR_SOFT_RESET:
-				if (_IOC_DIR(cmd) != _IOC_NONE) {
-					retval = -EINVAL;
-					goto done;
-				}
-				retval = usblp_reset(usblp);
-				break;
-			default:
-				retval = -ENOTTY;
+		case IOCNR_SOFT_RESET:
+			if (_IOC_DIR(cmd) != _IOC_NONE) {
+				retval = -EINVAL;
+				goto done;
+			}
+			retval = usblp_reset(usblp);
+			break;
+		default:
+			retval = -ENOTTY;
 		}
 	else	/* old-style ioctl value */
 		switch (cmd) {
 
-			case LPGETSTATUS:
-				if ((retval = usblp_read_status(usblp, usblp->statusbuf))) {
-					if (printk_ratelimit())
-						printk(KERN_ERR "usblp%d:"
-						    "failed reading printer status (%d)\n",
-						    usblp->minor, retval);
-					retval = -EIO;
-					goto done;
-				}
-				status = *usblp->statusbuf;
-				if (copy_to_user ((void __user *)arg, &status, sizeof(int)))
-					retval = -EFAULT;
-				break;
+		case LPGETSTATUS:
+			if ((retval = usblp_read_status(usblp, usblp->statusbuf))) {
+				if (printk_ratelimit())
+					printk(KERN_ERR "usblp%d:"
+					    "failed reading printer status (%d)\n",
+					    usblp->minor, retval);
+				retval = -EIO;
+				goto done;
+			}
+			status = *usblp->statusbuf;
+			if (copy_to_user((void __user *)arg, &status, sizeof(int)))
+				retval = -EFAULT;
+			break;
 
-			case LPABORT:
-				if (arg)
-					usblp->flags |= LP_ABORT;
-				else
-					usblp->flags &= ~LP_ABORT;
-				break;
+		case LPABORT:
+			if (arg)
+				usblp->flags |= LP_ABORT;
+			else
+				usblp->flags &= ~LP_ABORT;
+			break;
 
-			default:
-				retval = -ENOTTY;
+		default:
+			retval = -ENOTTY;
 		}
 
 done:
-	mutex_unlock (&usblp->mut);
+	mutex_unlock(&usblp->mut);
 	return retval;
 }
 
@@ -840,7 +839,7 @@ static ssize_t usblp_read(struct file *file, char __user *buffer, size_t len, lo
 	}
 
 done:
-	mutex_unlock (&usblp->mut);
+	mutex_unlock(&usblp->mut);
 	return count;
 }
 
@@ -1023,7 +1022,7 @@ raise_urb:
  * while you are sending print data, and you don't try to query the
  * printer status every couple of milliseconds, you will probably be OK.
  */
-static unsigned int usblp_quirks (__u16 vendor, __u16 product)
+static unsigned int usblp_quirks(__u16 vendor, __u16 product)
 {
 	int i;
 
@@ -1031,7 +1030,7 @@ static unsigned int usblp_quirks (__u16 vendor, __u16 product)
 		if (vendor == quirk_printers[i].vendorId &&
 		    product == quirk_printers[i].productId)
 			return quirk_printers[i].quirks;
- 	}
+	}
 	return 0;
 }
 
@@ -1061,7 +1060,7 @@ static struct usb_class_driver usblp_class = {
 static ssize_t usblp_show_ieee1284_id(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct usb_interface *intf = to_usb_interface(dev);
-	struct usblp *usblp = usb_get_intfdata (intf);
+	struct usblp *usblp = usb_get_intfdata(intf);
 
 	if (usblp->device_id_string[0] == 0 &&
 	    usblp->device_id_string[1] == 0)
@@ -1075,7 +1074,7 @@ static DEVICE_ATTR(ieee1284_id, S_IRUGO, usblp_show_ieee1284_id, NULL);
 static int usblp_probe(struct usb_interface *intf,
 		       const struct usb_device_id *id)
 {
-	struct usb_device *dev = interface_to_usbdev (intf);
+	struct usb_device *dev = interface_to_usbdev(intf);
 	struct usblp *usblp;
 	int protocol;
 	int retval;
@@ -1089,7 +1088,7 @@ static int usblp_probe(struct usb_interface *intf,
 	}
 	usblp->dev = dev;
 	mutex_init(&usblp->wmut);
-	mutex_init (&usblp->mut);
+	mutex_init(&usblp->mut);
 	spin_lock_init(&usblp->lock);
 	init_waitqueue_head(&usblp->rwait);
 	init_waitqueue_head(&usblp->wwait);
@@ -1153,7 +1152,7 @@ static int usblp_probe(struct usb_interface *intf,
 	usblp_check_status(usblp, 0);
 #endif
 
-	usb_set_intfdata (intf, usblp);
+	usb_set_intfdata(intf, usblp);
 
 	usblp->present = 1;
 
@@ -1177,7 +1176,7 @@ static int usblp_probe(struct usb_interface *intf,
 	return 0;
 
 abort_intfdata:
-	usb_set_intfdata (intf, NULL);
+	usb_set_intfdata(intf, NULL);
 	device_remove_file(&intf->dev, &dev_attr_ieee1284_id);
 abort:
 	kfree(usblp->readbuf);
@@ -1340,35 +1339,35 @@ static int usblp_cache_device_id_string(struct usblp *usblp)
 
 static void usblp_disconnect(struct usb_interface *intf)
 {
-	struct usblp *usblp = usb_get_intfdata (intf);
+	struct usblp *usblp = usb_get_intfdata(intf);
 
 	usb_deregister_dev(intf, &usblp_class);
 
 	if (!usblp || !usblp->dev) {
 		dev_err(&intf->dev, "bogus disconnect\n");
-		BUG ();
+		BUG();
 	}
 
 	device_remove_file(&intf->dev, &dev_attr_ieee1284_id);
 
-	mutex_lock (&usblp_mutex);
-	mutex_lock (&usblp->mut);
+	mutex_lock(&usblp_mutex);
+	mutex_lock(&usblp->mut);
 	usblp->present = 0;
 	wake_up(&usblp->wwait);
 	wake_up(&usblp->rwait);
-	usb_set_intfdata (intf, NULL);
+	usb_set_intfdata(intf, NULL);
 
 	usblp_unlink_urbs(usblp);
-	mutex_unlock (&usblp->mut);
+	mutex_unlock(&usblp->mut);
 
 	if (!usblp->used)
-		usblp_cleanup (usblp);
-	mutex_unlock (&usblp_mutex);
+		usblp_cleanup(usblp);
+	mutex_unlock(&usblp_mutex);
 }
 
 static int usblp_suspend(struct usb_interface *intf, pm_message_t message)
 {
-	struct usblp *usblp = usb_get_intfdata (intf);
+	struct usblp *usblp = usb_get_intfdata(intf);
 
 	usblp_unlink_urbs(usblp);
 #if 0 /* XXX Do we want this? What if someone is reading, should we fail? */
@@ -1382,10 +1381,10 @@ static int usblp_suspend(struct usb_interface *intf, pm_message_t message)
 
 static int usblp_resume(struct usb_interface *intf)
 {
-	struct usblp *usblp = usb_get_intfdata (intf);
+	struct usblp *usblp = usb_get_intfdata(intf);
 	int r;
 
-	r = handle_bidir (usblp);
+	r = handle_bidir(usblp);
 
 	return r;
 }
@@ -1401,7 +1400,7 @@ static const struct usb_device_id usblp_ids[] = {
 	{ }						/* Terminating entry */
 };
 
-MODULE_DEVICE_TABLE (usb, usblp_ids);
+MODULE_DEVICE_TABLE(usb, usblp_ids);
 
 static struct usb_driver usblp_driver = {
 	.name =		"usblp",
@@ -1426,8 +1425,8 @@ static void __exit usblp_exit(void)
 module_init(usblp_init);
 module_exit(usblp_exit);
 
-MODULE_AUTHOR( DRIVER_AUTHOR );
-MODULE_DESCRIPTION( DRIVER_DESC );
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
 module_param(proto_bias, int, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(proto_bias, "Favourite protocol number");
 MODULE_LICENSE("GPL");
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index c2f62a3..f1aaff6 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -1668,13 +1668,10 @@ static int proc_ioctl(struct dev_state *ps, struct usbdevfs_ioctl *ctl)
 	default:
 		if (intf->dev.driver)
 			driver = to_usb_driver(intf->dev.driver);
-		if (driver == NULL || driver->ioctl == NULL) {
+		if (driver == NULL || driver->unlocked_ioctl == NULL) {
 			retval = -ENOTTY;
 		} else {
-			/* keep API that guarantees BKL */
-			lock_kernel();
-			retval = driver->ioctl(intf, ctl->ioctl_code, buf);
-			unlock_kernel();
+			retval = driver->unlocked_ioctl(intf, ctl->ioctl_code, buf);
 			if (retval == -ENOIOCTLCMD)
 				retval = -ENOTTY;
 		}
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index a6bd53a..d7a4401 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -1742,9 +1742,8 @@ static int usb_runtime_suspend(struct device *dev)
 		}
 
 		/* Prevent the parent from suspending immediately after */
-		else if (udev->parent) {
+		else if (udev->parent)
 			udev->parent->last_busy = jiffies;
-		}
 	}
 
 	/* Runtime suspend for a USB interface doesn't mean anything. */
@@ -1786,21 +1785,19 @@ static int usb_runtime_idle(struct device *dev)
 	return 0;
 }
 
-static struct dev_pm_ops usb_bus_pm_ops = {
+static const struct dev_pm_ops usb_bus_pm_ops = {
 	.runtime_suspend =	usb_runtime_suspend,
 	.runtime_resume =	usb_runtime_resume,
 	.runtime_idle =		usb_runtime_idle,
 };
 
-#else
-
-#define usb_bus_pm_ops	(*(struct dev_pm_ops *) NULL)
-
 #endif /* CONFIG_USB_SUSPEND */
 
 struct bus_type usb_bus_type = {
 	.name =		"usb",
 	.match =	usb_device_match,
 	.uevent =	usb_uevent,
+#ifdef CONFIG_USB_SUSPEND
 	.pm =		&usb_bus_pm_ops,
+#endif
 };
diff --git a/drivers/usb/core/endpoint.c b/drivers/usb/core/endpoint.c
index 4f84a41..3788e73 100644
--- a/drivers/usb/core/endpoint.c
+++ b/drivers/usb/core/endpoint.c
@@ -96,16 +96,21 @@ static ssize_t show_ep_interval(struct device *dev,
 
 	switch (usb_endpoint_type(ep->desc)) {
 	case USB_ENDPOINT_XFER_CONTROL:
-		if (ep->udev->speed == USB_SPEED_HIGH) 	/* uframes per NAK */
+		if (ep->udev->speed == USB_SPEED_HIGH)
+			/* uframes per NAK */
 			interval = ep->desc->bInterval;
 		break;
+
 	case USB_ENDPOINT_XFER_ISOC:
 		interval = 1 << (ep->desc->bInterval - 1);
 		break;
+
 	case USB_ENDPOINT_XFER_BULK:
-		if (ep->udev->speed == USB_SPEED_HIGH && !in) /* uframes per NAK */
+		if (ep->udev->speed == USB_SPEED_HIGH && !in)
+			/* uframes per NAK */
 			interval = ep->desc->bInterval;
 		break;
+
 	case USB_ENDPOINT_XFER_INT:
 		if (ep->udev->speed == USB_SPEED_HIGH)
 			interval = 1 << (ep->desc->bInterval - 1);
diff --git a/drivers/usb/core/generic.c b/drivers/usb/core/generic.c
index 9a34ccb..69ecd3c 100644
--- a/drivers/usb/core/generic.c
+++ b/drivers/usb/core/generic.c
@@ -105,8 +105,10 @@ int usb_choose_configuration(struct usb_device *udev)
 		/* When the first config's first interface is one of Microsoft's
 		 * pet nonstandard Ethernet-over-USB protocols, ignore it unless
 		 * this kernel has enabled the necessary host side driver.
+		 * But: Don't ignore it if it's the only config.
 		 */
-		if (i == 0 && desc && (is_rndis(desc) || is_activesync(desc))) {
+		if (i == 0 && num_configs > 1 && desc &&
+				(is_rndis(desc) || is_activesync(desc))) {
 #if !defined(CONFIG_USB_NET_RNDIS_HOST) && !defined(CONFIG_USB_NET_RNDIS_HOST_MODULE)
 			continue;
 #else
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index 1cf2d1e..c3f9854 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -66,10 +66,7 @@ static void companion_common(struct pci_dev *pdev, struct usb_hcd *hcd,
 	 * vice versa.
 	 */
 	companion = NULL;
-	for (;;) {
-		companion = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, companion);
-		if (!companion)
-			break;
+	for_each_pci_dev(companion) {
 		if (companion->bus != pdev->bus ||
 				PCI_SLOT(companion->devfn) != slot)
 			continue;
@@ -250,6 +247,9 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	if (retval != 0)
 		goto err4;
 	set_hs_companion(dev, hcd);
+
+	if (pci_dev_run_wake(dev))
+		pm_runtime_put_noidle(&dev->dev);
 	return retval;
 
  err4:
@@ -292,6 +292,17 @@ void usb_hcd_pci_remove(struct pci_dev *dev)
 	if (!hcd)
 		return;
 
+	if (pci_dev_run_wake(dev))
+		pm_runtime_get_noresume(&dev->dev);
+
+	/* Fake an interrupt request in order to give the driver a chance
+	 * to test whether the controller hardware has been removed (e.g.,
+	 * cardbus physical eject).
+	 */
+	local_irq_disable();
+	usb_hcd_irq(0, hcd);
+	local_irq_enable();
+
 	usb_remove_hcd(hcd);
 	if (hcd->driver->flags & HCD_MEMORY) {
 		iounmap(hcd->regs);
@@ -317,12 +328,34 @@ void usb_hcd_pci_shutdown(struct pci_dev *dev)
 	if (!hcd)
 		return;
 
-	if (hcd->driver->shutdown)
+	if (test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) &&
+			hcd->driver->shutdown)
 		hcd->driver->shutdown(hcd);
 }
 EXPORT_SYMBOL_GPL(usb_hcd_pci_shutdown);
 
-#ifdef	CONFIG_PM_SLEEP
+#ifdef	CONFIG_PM_OPS
+
+#ifdef	CONFIG_PPC_PMAC
+static void powermac_set_asic(struct pci_dev *pci_dev, int enable)
+{
+	/* Enanble or disable ASIC clocks for USB */
+	if (machine_is(powermac)) {
+		struct device_node	*of_node;
+
+		of_node = pci_device_to_OF_node(pci_dev);
+		if (of_node)
+			pmac_call_feature(PMAC_FTR_USB_ENABLE,
+					of_node, 0, enable);
+	}
+}
+
+#else
+
+static inline void powermac_set_asic(struct pci_dev *pci_dev, int enable)
+{}
+
+#endif	/* CONFIG_PPC_PMAC */
 
 static int check_root_hub_suspended(struct device *dev)
 {
@@ -337,7 +370,7 @@ static int check_root_hub_suspended(struct device *dev)
 	return 0;
 }
 
-static int hcd_pci_suspend(struct device *dev)
+static int suspend_common(struct device *dev, bool do_wakeup)
 {
 	struct pci_dev		*pci_dev = to_pci_dev(dev);
 	struct usb_hcd		*hcd = pci_get_drvdata(pci_dev);
@@ -352,13 +385,21 @@ static int hcd_pci_suspend(struct device *dev)
 	if (retval)
 		return retval;
 
-	/* We might already be suspended (runtime PM -- not yet written) */
-	if (pci_dev->current_state != PCI_D0)
-		return retval;
-
 	if (hcd->driver->pci_suspend) {
-		retval = hcd->driver->pci_suspend(hcd);
+		/* Optimization: Don't suspend if a root-hub wakeup is
+		 * pending and it would cause the HCD to wake up anyway.
+		 */
+		if (do_wakeup && HCD_WAKEUP_PENDING(hcd))
+			return -EBUSY;
+		retval = hcd->driver->pci_suspend(hcd, do_wakeup);
 		suspend_report_result(hcd->driver->pci_suspend, retval);
+
+		/* Check again in case wakeup raced with pci_suspend */
+		if (retval == 0 && do_wakeup && HCD_WAKEUP_PENDING(hcd)) {
+			if (hcd->driver->pci_resume)
+				hcd->driver->pci_resume(hcd, false);
+			retval = -EBUSY;
+		}
 		if (retval)
 			return retval;
 	}
@@ -374,6 +415,48 @@ static int hcd_pci_suspend(struct device *dev)
 	return retval;
 }
 
+static int resume_common(struct device *dev, int event)
+{
+	struct pci_dev		*pci_dev = to_pci_dev(dev);
+	struct usb_hcd		*hcd = pci_get_drvdata(pci_dev);
+	int			retval;
+
+	if (hcd->state != HC_STATE_SUSPENDED) {
+		dev_dbg(dev, "can't resume, not suspended!\n");
+		return 0;
+	}
+
+	retval = pci_enable_device(pci_dev);
+	if (retval < 0) {
+		dev_err(dev, "can't re-enable after resume, %d!\n", retval);
+		return retval;
+	}
+
+	pci_set_master(pci_dev);
+
+	clear_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
+
+	if (hcd->driver->pci_resume) {
+		if (event != PM_EVENT_AUTO_RESUME)
+			wait_for_companions(pci_dev, hcd);
+
+		retval = hcd->driver->pci_resume(hcd,
+				event == PM_EVENT_RESTORE);
+		if (retval) {
+			dev_err(dev, "PCI post-resume error %d!\n", retval);
+			usb_hc_died(hcd);
+		}
+	}
+	return retval;
+}
+
+#ifdef	CONFIG_PM_SLEEP
+
+static int hcd_pci_suspend(struct device *dev)
+{
+	return suspend_common(dev, device_may_wakeup(dev));
+}
+
 static int hcd_pci_suspend_noirq(struct device *dev)
 {
 	struct pci_dev		*pci_dev = to_pci_dev(dev);
@@ -408,16 +491,7 @@ static int hcd_pci_suspend_noirq(struct device *dev)
 		return retval;
 	}
 
-#ifdef CONFIG_PPC_PMAC
-	/* Disable ASIC clocks for USB */
-	if (machine_is(powermac)) {
-		struct device_node	*of_node;
-
-		of_node = pci_device_to_OF_node(pci_dev);
-		if (of_node)
-			pmac_call_feature(PMAC_FTR_USB_ENABLE, of_node, 0, 0);
-	}
-#endif
+	powermac_set_asic(pci_dev, 0);
 	return retval;
 }
 
@@ -425,69 +499,63 @@ static int hcd_pci_resume_noirq(struct device *dev)
 {
 	struct pci_dev		*pci_dev = to_pci_dev(dev);
 
-#ifdef CONFIG_PPC_PMAC
-	/* Reenable ASIC clocks for USB */
-	if (machine_is(powermac)) {
-		struct device_node *of_node;
-
-		of_node = pci_device_to_OF_node(pci_dev);
-		if (of_node)
-			pmac_call_feature(PMAC_FTR_USB_ENABLE,
-						of_node, 0, 1);
-	}
-#endif
+	powermac_set_asic(pci_dev, 1);
 
 	/* Go back to D0 and disable remote wakeup */
 	pci_back_from_sleep(pci_dev);
 	return 0;
 }
 
-static int resume_common(struct device *dev, bool hibernated)
+static int hcd_pci_resume(struct device *dev)
 {
-	struct pci_dev		*pci_dev = to_pci_dev(dev);
-	struct usb_hcd		*hcd = pci_get_drvdata(pci_dev);
-	int			retval;
+	return resume_common(dev, PM_EVENT_RESUME);
+}
 
-	if (hcd->state != HC_STATE_SUSPENDED) {
-		dev_dbg(dev, "can't resume, not suspended!\n");
-		return 0;
-	}
+static int hcd_pci_restore(struct device *dev)
+{
+	return resume_common(dev, PM_EVENT_RESTORE);
+}
 
-	retval = pci_enable_device(pci_dev);
-	if (retval < 0) {
-		dev_err(dev, "can't re-enable after resume, %d!\n", retval);
-		return retval;
-	}
+#else
 
-	pci_set_master(pci_dev);
+#define hcd_pci_suspend		NULL
+#define hcd_pci_suspend_noirq	NULL
+#define hcd_pci_resume_noirq	NULL
+#define hcd_pci_resume		NULL
+#define hcd_pci_restore		NULL
 
-	clear_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
+#endif	/* CONFIG_PM_SLEEP */
 
-	if (hcd->driver->pci_resume) {
-		/* This call should be made only during system resume,
-		 * not during runtime resume.
-		 */
-		wait_for_companions(pci_dev, hcd);
+#ifdef	CONFIG_PM_RUNTIME
 
-		retval = hcd->driver->pci_resume(hcd, hibernated);
-		if (retval) {
-			dev_err(dev, "PCI post-resume error %d!\n", retval);
-			usb_hc_died(hcd);
-		}
-	}
+static int hcd_pci_runtime_suspend(struct device *dev)
+{
+	int	retval;
+
+	retval = suspend_common(dev, true);
+	if (retval == 0)
+		powermac_set_asic(to_pci_dev(dev), 0);
+	dev_dbg(dev, "hcd_pci_runtime_suspend: %d\n", retval);
 	return retval;
 }
 
-static int hcd_pci_resume(struct device *dev)
+static int hcd_pci_runtime_resume(struct device *dev)
 {
-	return resume_common(dev, false);
-}
+	int	retval;
 
-static int hcd_pci_restore(struct device *dev)
-{
-	return resume_common(dev, true);
+	powermac_set_asic(to_pci_dev(dev), 1);
+	retval = resume_common(dev, PM_EVENT_AUTO_RESUME);
+	dev_dbg(dev, "hcd_pci_runtime_resume: %d\n", retval);
+	return retval;
 }
 
+#else
+
+#define hcd_pci_runtime_suspend	NULL
+#define hcd_pci_runtime_resume	NULL
+
+#endif	/* CONFIG_PM_RUNTIME */
+
 const struct dev_pm_ops usb_hcd_pci_pm_ops = {
 	.suspend	= hcd_pci_suspend,
 	.suspend_noirq	= hcd_pci_suspend_noirq,
@@ -501,7 +569,9 @@ const struct dev_pm_ops usb_hcd_pci_pm_ops = {
 	.poweroff_noirq	= hcd_pci_suspend_noirq,
 	.restore_noirq	= hcd_pci_resume_noirq,
 	.restore	= hcd_pci_restore,
+	.runtime_suspend = hcd_pci_runtime_suspend,
+	.runtime_resume	= hcd_pci_runtime_resume,
 };
 EXPORT_SYMBOL_GPL(usb_hcd_pci_pm_ops);
 
-#endif	/* CONFIG_PM_SLEEP */
+#endif	/* CONFIG_PM_OPS */
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 12742f1..5cca00a 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -667,7 +667,7 @@ void usb_hcd_poll_rh_status(struct usb_hcd *hcd)
 	unsigned long	flags;
 	char		buffer[6];	/* Any root hubs with > 31 ports? */
 
-	if (unlikely(!hcd->rh_registered))
+	if (unlikely(!hcd->rh_pollable))
 		return;
 	if (!hcd->uses_new_polling && !hcd->status_urb)
 		return;
@@ -679,7 +679,7 @@ void usb_hcd_poll_rh_status(struct usb_hcd *hcd)
 		spin_lock_irqsave(&hcd_root_hub_lock, flags);
 		urb = hcd->status_urb;
 		if (urb) {
-			hcd->poll_pending = 0;
+			clear_bit(HCD_FLAG_POLL_PENDING, &hcd->flags);
 			hcd->status_urb = NULL;
 			urb->actual_length = length;
 			memcpy(urb->transfer_buffer, buffer, length);
@@ -690,7 +690,7 @@ void usb_hcd_poll_rh_status(struct usb_hcd *hcd)
 			spin_lock(&hcd_root_hub_lock);
 		} else {
 			length = 0;
-			hcd->poll_pending = 1;
+			set_bit(HCD_FLAG_POLL_PENDING, &hcd->flags);
 		}
 		spin_unlock_irqrestore(&hcd_root_hub_lock, flags);
 	}
@@ -699,7 +699,7 @@ void usb_hcd_poll_rh_status(struct usb_hcd *hcd)
 	 * exceed that limit if HZ is 100. The math is more clunky than
 	 * maybe expected, this is to make sure that all timers for USB devices
 	 * fire at the same time to give the CPU a break inbetween */
-	if (hcd->uses_new_polling ? hcd->poll_rh :
+	if (hcd->uses_new_polling ? HCD_POLL_RH(hcd) :
 			(length == 0 && hcd->status_urb != NULL))
 		mod_timer (&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4));
 }
@@ -736,7 +736,7 @@ static int rh_queue_status (struct usb_hcd *hcd, struct urb *urb)
 		mod_timer(&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4));
 
 	/* If a status change has already occurred, report it ASAP */
-	else if (hcd->poll_pending)
+	else if (HCD_POLL_PENDING(hcd))
 		mod_timer(&hcd->rh_timer, jiffies);
 	retval = 0;
  done:
@@ -1150,8 +1150,7 @@ int usb_hcd_check_unlink_urb(struct usb_hcd *hcd, struct urb *urb,
 	 * finish unlinking the initial failed usb_set_address()
 	 * or device descriptor fetch.
 	 */
-	if (!test_bit(HCD_FLAG_SAW_IRQ, &hcd->flags) &&
-			!is_root_hub(urb->dev)) {
+	if (!HCD_SAW_IRQ(hcd) && !is_root_hub(urb->dev)) {
 		dev_warn(hcd->self.controller, "Unlink after no-IRQ?  "
 			"Controller is probably using the wrong IRQ.\n");
 		set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
@@ -1219,6 +1218,11 @@ static int hcd_alloc_coherent(struct usb_bus *bus,
 {
 	unsigned char *vaddr;
 
+	if (*vaddr_handle == NULL) {
+		WARN_ON_ONCE(1);
+		return -EFAULT;
+	}
+
 	vaddr = hcd_buffer_alloc(bus, size + sizeof(vaddr),
 				 mem_flags, dma_handle);
 	if (!vaddr)
@@ -1941,6 +1945,7 @@ int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg)
 
 	dev_dbg(&rhdev->dev, "usb %s%s\n",
 			(msg.event & PM_EVENT_AUTO ? "auto-" : ""), "resume");
+	clear_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags);
 	if (!hcd->driver->bus_resume)
 		return -ENOENT;
 	if (hcd->state == HC_STATE_RUNNING)
@@ -1994,8 +1999,10 @@ void usb_hcd_resume_root_hub (struct usb_hcd *hcd)
 	unsigned long flags;
 
 	spin_lock_irqsave (&hcd_root_hub_lock, flags);
-	if (hcd->rh_registered)
+	if (hcd->rh_registered) {
+		set_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags);
 		queue_work(pm_wq, &hcd->wakeup_work);
+	}
 	spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
 }
 EXPORT_SYMBOL_GPL(usb_hcd_resume_root_hub);
@@ -2063,8 +2070,7 @@ irqreturn_t usb_hcd_irq (int irq, void *__hcd)
 	 */
 	local_irq_save(flags);
 
-	if (unlikely(hcd->state == HC_STATE_HALT ||
-		     !test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))) {
+	if (unlikely(hcd->state == HC_STATE_HALT || !HCD_HW_ACCESSIBLE(hcd))) {
 		rc = IRQ_NONE;
 	} else if (hcd->driver->irq(hcd) == IRQ_NONE) {
 		rc = IRQ_NONE;
@@ -2079,6 +2085,7 @@ irqreturn_t usb_hcd_irq (int irq, void *__hcd)
 	local_irq_restore(flags);
 	return rc;
 }
+EXPORT_SYMBOL_GPL(usb_hcd_irq);
 
 /*-------------------------------------------------------------------------*/
 
@@ -2098,7 +2105,7 @@ void usb_hc_died (struct usb_hcd *hcd)
 
 	spin_lock_irqsave (&hcd_root_hub_lock, flags);
 	if (hcd->rh_registered) {
-		hcd->poll_rh = 0;
+		clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
 
 		/* make khubd clean up old urbs and devices */
 		usb_set_device_state (hcd->self.root_hub,
@@ -2217,6 +2224,7 @@ int usb_add_hcd(struct usb_hcd *hcd,
 		retval = -ENOMEM;
 		goto err_allocate_root_hub;
 	}
+	hcd->self.root_hub = rhdev;
 
 	switch (hcd->driver->flags & HCD_MASK) {
 	case HCD_USB11:
@@ -2229,9 +2237,8 @@ int usb_add_hcd(struct usb_hcd *hcd,
 		rhdev->speed = USB_SPEED_SUPER;
 		break;
 	default:
-		goto err_allocate_root_hub;
+		goto err_set_rh_speed;
 	}
-	hcd->self.root_hub = rhdev;
 
 	/* wakeup flag init defaults to "everything works" for root hubs,
 	 * but drivers can override it in reset() if needed, along with
@@ -2246,6 +2253,7 @@ int usb_add_hcd(struct usb_hcd *hcd,
 		dev_err(hcd->self.controller, "can't setup\n");
 		goto err_hcd_driver_setup;
 	}
+	hcd->rh_pollable = 1;
 
 	/* NOTE: root hub and controller capabilities may not be the same */
 	if (device_can_wakeup(hcd->self.controller)
@@ -2300,23 +2308,38 @@ int usb_add_hcd(struct usb_hcd *hcd,
 		       retval);
 		goto error_create_attr_group;
 	}
-	if (hcd->uses_new_polling && hcd->poll_rh)
+	if (hcd->uses_new_polling && HCD_POLL_RH(hcd))
 		usb_hcd_poll_rh_status(hcd);
 	return retval;
 
 error_create_attr_group:
+	if (HC_IS_RUNNING(hcd->state))
+		hcd->state = HC_STATE_QUIESCING;
+	spin_lock_irq(&hcd_root_hub_lock);
+	hcd->rh_registered = 0;
+	spin_unlock_irq(&hcd_root_hub_lock);
+
+#ifdef CONFIG_USB_SUSPEND
+	cancel_work_sync(&hcd->wakeup_work);
+#endif
 	mutex_lock(&usb_bus_list_lock);
-	usb_disconnect(&hcd->self.root_hub);
+	usb_disconnect(&rhdev);		/* Sets rhdev to NULL */
 	mutex_unlock(&usb_bus_list_lock);
 err_register_root_hub:
+	hcd->rh_pollable = 0;
+	clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+	del_timer_sync(&hcd->rh_timer);
 	hcd->driver->stop(hcd);
+	hcd->state = HC_STATE_HALT;
+	clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+	del_timer_sync(&hcd->rh_timer);
 err_hcd_driver_start:
 	if (hcd->irq >= 0)
 		free_irq(irqnum, hcd);
 err_request_irq:
 err_hcd_driver_setup:
-	hcd->self.root_hub = NULL;
-	usb_put_dev(rhdev);
+err_set_rh_speed:
+	usb_put_dev(hcd->self.root_hub);
 err_allocate_root_hub:
 	usb_deregister_bus(&hcd->self);
 err_register_bus:
@@ -2335,8 +2358,13 @@ EXPORT_SYMBOL_GPL(usb_add_hcd);
  */
 void usb_remove_hcd(struct usb_hcd *hcd)
 {
+	struct usb_device *rhdev = hcd->self.root_hub;
+
 	dev_info(hcd->self.controller, "remove, state %x\n", hcd->state);
 
+	usb_get_dev(rhdev);
+	sysfs_remove_group(&rhdev->dev.kobj, &usb_bus_attr_group);
+
 	if (HC_IS_RUNNING (hcd->state))
 		hcd->state = HC_STATE_QUIESCING;
 
@@ -2349,19 +2377,30 @@ void usb_remove_hcd(struct usb_hcd *hcd)
 	cancel_work_sync(&hcd->wakeup_work);
 #endif
 
-	sysfs_remove_group(&hcd->self.root_hub->dev.kobj, &usb_bus_attr_group);
 	mutex_lock(&usb_bus_list_lock);
-	usb_disconnect(&hcd->self.root_hub);
+	usb_disconnect(&rhdev);		/* Sets rhdev to NULL */
 	mutex_unlock(&usb_bus_list_lock);
 
+	/* Prevent any more root-hub status calls from the timer.
+	 * The HCD might still restart the timer (if a port status change
+	 * interrupt occurs), but usb_hcd_poll_rh_status() won't invoke
+	 * the hub_status_data() callback.
+	 */
+	hcd->rh_pollable = 0;
+	clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+	del_timer_sync(&hcd->rh_timer);
+
 	hcd->driver->stop(hcd);
 	hcd->state = HC_STATE_HALT;
 
-	hcd->poll_rh = 0;
+	/* In case the HCD restarted the timer, stop it again. */
+	clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
 	del_timer_sync(&hcd->rh_timer);
 
 	if (hcd->irq >= 0)
 		free_irq(hcd->irq, hcd);
+
+	usb_put_dev(hcd->self.root_hub);
 	usb_deregister_bus(&hcd->self);
 	hcd_buffer_destroy(hcd);
 }
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 70cccc7..84c18971 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -20,6 +20,7 @@
 #include <linux/usb.h>
 #include <linux/usbdevice_fs.h>
 #include <linux/usb/hcd.h>
+#include <linux/usb/quirks.h>
 #include <linux/kthread.h>
 #include <linux/mutex.h>
 #include <linux/freezer.h>
@@ -1294,6 +1295,7 @@ descriptor_error:
 	return -ENODEV;
 }
 
+/* No BKL needed */
 static int
 hub_ioctl(struct usb_interface *intf, unsigned int code, void *user_data)
 {
@@ -1801,7 +1803,6 @@ int usb_new_device(struct usb_device *udev)
 	pm_runtime_set_active(&udev->dev);
 	pm_runtime_enable(&udev->dev);
 
-	usb_detect_quirks(udev);
 	err = usb_enumerate_device(udev);	/* Read descriptors */
 	if (err < 0)
 		goto fail;
@@ -2880,7 +2881,9 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 	}
 
 	retval = 0;
-
+	/* notify HCD that we have a device connected and addressed */
+	if (hcd->driver->update_device)
+		hcd->driver->update_device(hcd, udev);
 fail:
 	if (retval) {
 		hub_port_disable(hub, port1, 0);
@@ -3111,6 +3114,10 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
 		if (status < 0)
 			goto loop;
 
+		usb_detect_quirks(udev);
+		if (udev->quirks & USB_QUIRK_DELAY_INIT)
+			msleep(1000);
+
 		/* consecutive bus-powered hubs aren't reliable; they can
 		 * violate the voltage drop budget.  if the new child has
 		 * a "powered" LED, users should notice we didn't enable it
@@ -3463,7 +3470,7 @@ static struct usb_driver hub_driver = {
 	.reset_resume =	hub_reset_resume,
 	.pre_reset =	hub_pre_reset,
 	.post_reset =	hub_post_reset,
-	.ioctl =	hub_ioctl,
+	.unlocked_ioctl = hub_ioctl,
 	.id_table =	hub_id_table,
 	.supports_autosuspend =	1,
 };
diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c
index 1a27618..095fa53 100644
--- a/drivers/usb/core/inode.c
+++ b/drivers/usb/core/inode.c
@@ -265,13 +265,9 @@ static int remount(struct super_block *sb, int *flags, char *data)
 		return -EINVAL;
 	}
 
-	lock_kernel();
-
 	if (usbfs_mount && usbfs_mount->mnt_sb)
 		update_sb(usbfs_mount->mnt_sb);
 
-	unlock_kernel();
-
 	return 0;
 }
 
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index db99c08..25719da 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -38,6 +38,9 @@ static const struct usb_device_id usb_quirk_list[] = {
 	/* Creative SB Audigy 2 NX */
 	{ USB_DEVICE(0x041e, 0x3020), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Logitech Harmony 700-series */
+	{ USB_DEVICE(0x046d, 0xc122), .driver_info = USB_QUIRK_DELAY_INIT },
+
 	/* Philips PSC805 audio device */
 	{ USB_DEVICE(0x0471, 0x0155), .driver_info = USB_QUIRK_RESET_RESUME },
 
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index 7c05555..419e6b3 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -137,6 +137,16 @@ void usb_anchor_urb(struct urb *urb, struct usb_anchor *anchor)
 }
 EXPORT_SYMBOL_GPL(usb_anchor_urb);
 
+/* Callers must hold anchor->lock */
+static void __usb_unanchor_urb(struct urb *urb, struct usb_anchor *anchor)
+{
+	urb->anchor = NULL;
+	list_del(&urb->anchor_list);
+	usb_put_urb(urb);
+	if (list_empty(&anchor->urb_list))
+		wake_up(&anchor->wait);
+}
+
 /**
  * usb_unanchor_urb - unanchors an URB
  * @urb: pointer to the urb to anchor
@@ -156,17 +166,14 @@ void usb_unanchor_urb(struct urb *urb)
 		return;
 
 	spin_lock_irqsave(&anchor->lock, flags);
-	if (unlikely(anchor != urb->anchor)) {
-		/* we've lost the race to another thread */
-		spin_unlock_irqrestore(&anchor->lock, flags);
-		return;
-	}
-	urb->anchor = NULL;
-	list_del(&urb->anchor_list);
+	/*
+	 * At this point, we could be competing with another thread which
+	 * has the same intention. To protect the urb from being unanchored
+	 * twice, only the winner of the race gets the job.
+	 */
+	if (likely(anchor == urb->anchor))
+		__usb_unanchor_urb(urb, anchor);
 	spin_unlock_irqrestore(&anchor->lock, flags);
-	usb_put_urb(urb);
-	if (list_empty(&anchor->urb_list))
-		wake_up(&anchor->wait);
 }
 EXPORT_SYMBOL_GPL(usb_unanchor_urb);
 
@@ -749,20 +756,11 @@ EXPORT_SYMBOL_GPL(usb_unpoison_anchored_urbs);
 void usb_unlink_anchored_urbs(struct usb_anchor *anchor)
 {
 	struct urb *victim;
-	unsigned long flags;
 
-	spin_lock_irqsave(&anchor->lock, flags);
-	while (!list_empty(&anchor->urb_list)) {
-		victim = list_entry(anchor->urb_list.prev, struct urb,
-				    anchor_list);
-		usb_get_urb(victim);
-		spin_unlock_irqrestore(&anchor->lock, flags);
-		/* this will unanchor the URB */
+	while ((victim = usb_get_from_anchor(anchor)) != NULL) {
 		usb_unlink_urb(victim);
 		usb_put_urb(victim);
-		spin_lock_irqsave(&anchor->lock, flags);
 	}
-	spin_unlock_irqrestore(&anchor->lock, flags);
 }
 EXPORT_SYMBOL_GPL(usb_unlink_anchored_urbs);
 
@@ -799,12 +797,11 @@ struct urb *usb_get_from_anchor(struct usb_anchor *anchor)
 		victim = list_entry(anchor->urb_list.next, struct urb,
 				    anchor_list);
 		usb_get_urb(victim);
-		spin_unlock_irqrestore(&anchor->lock, flags);
-		usb_unanchor_urb(victim);
+		__usb_unanchor_urb(victim, anchor);
 	} else {
-		spin_unlock_irqrestore(&anchor->lock, flags);
 		victim = NULL;
 	}
+	spin_unlock_irqrestore(&anchor->lock, flags);
 
 	return victim;
 }
@@ -826,12 +823,7 @@ void usb_scuttle_anchored_urbs(struct usb_anchor *anchor)
 	while (!list_empty(&anchor->urb_list)) {
 		victim = list_entry(anchor->urb_list.prev, struct urb,
 				    anchor_list);
-		usb_get_urb(victim);
-		spin_unlock_irqrestore(&anchor->lock, flags);
-		/* this may free the URB */
-		usb_unanchor_urb(victim);
-		usb_put_urb(victim);
-		spin_lock_irqsave(&anchor->lock, flags);
+		__usb_unanchor_urb(victim, anchor);
 	}
 	spin_unlock_irqrestore(&anchor->lock, flags);
 }
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 5ae14f6..fdd4130 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -317,10 +317,6 @@ static const struct dev_pm_ops usb_device_pm_ops = {
 	.restore =	usb_dev_restore,
 };
 
-#else
-
-#define usb_device_pm_ops	(*(struct dev_pm_ops *) NULL)
-
 #endif	/* CONFIG_PM */
 
 
@@ -338,7 +334,9 @@ struct device_type usb_device_type = {
 	.release =	usb_release_dev,
 	.uevent =	usb_dev_uevent,
 	.devnode = 	usb_devnode,
+#ifdef CONFIG_PM
 	.pm =		&usb_device_pm_ops,
+#endif
 };
 
 
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 591ae9f..cd27f9b 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -714,6 +714,7 @@ config USB_GADGETFS
 config USB_FUNCTIONFS
 	tristate "Function Filesystem (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
+	select USB_FUNCTIONFS_GENERIC if !(USB_FUNCTIONFS_ETH || USB_FUNCTIONFS_RNDIS)
 	help
 	  The Function Filesystem (FunctioFS) lets one create USB
 	  composite functions in user space in the same way as GadgetFS
@@ -722,31 +723,31 @@ config USB_FUNCTIONFS
 	  implemented in kernel space (for instance Ethernet, serial or
 	  mass storage) and other are implemented in user space.
 
+	  If you say "y" or "m" here you will be able what kind of
+	  configurations the gadget will provide.
+
 	  Say "y" to link the driver statically, or "m" to build
 	  a dynamically linked module called "g_ffs".
 
 config USB_FUNCTIONFS_ETH
-	bool "Include CDC ECM (Ethernet) function"
+	bool "Include configuration with CDC ECM (Ethernet)"
 	depends on USB_FUNCTIONFS && NET
 	help
-	  Include an CDC ECM (Ethernet) funcion in the CDC ECM (Funcion)
-	  Filesystem.  If you also say "y" to the RNDIS query below the
-	  gadget will have two configurations.
+	  Include a configuration with CDC ECM funcion (Ethernet) and the
+	  Funcion Filesystem.
 
 config USB_FUNCTIONFS_RNDIS
-	bool "Include RNDIS (Ethernet) function"
+	bool "Include configuration with RNDIS (Ethernet)"
 	depends on USB_FUNCTIONFS && NET
 	help
-	  Include an RNDIS (Ethernet) funcion in the Funcion Filesystem.
-	  If you also say "y" to the CDC ECM query above the gadget will
-	  have two configurations.
+	  Include a configuration with RNDIS funcion (Ethernet) and the Filesystem.
 
 config USB_FUNCTIONFS_GENERIC
 	bool "Include 'pure' configuration"
-	depends on USB_FUNCTIONFS && (USB_FUNCTIONFS_ETH || USB_FUNCTIONFS_RNDIS)
+	depends on USB_FUNCTIONFS
 	help
-	  Include a configuration with FunctionFS and no Ethernet
-	  configuration.
+	  Include a configuration with the Function Filesystem alone with
+	  no Ethernet interface.
 
 config USB_FILE_STORAGE
 	tristate "File-backed Storage Gadget"
@@ -863,6 +864,7 @@ config USB_G_NOKIA
 config USB_G_MULTI
 	tristate "Multifunction Composite Gadget (EXPERIMENTAL)"
 	depends on BLOCK && NET
+	select USB_G_MULTI_CDC if !USB_G_MULTI_RNDIS
 	help
 	  The Multifunction Composite Gadget provides Ethernet (RNDIS
 	  and/or CDC Ethernet), mass storage and ACM serial link
@@ -913,6 +915,34 @@ config USB_G_HID
 	  Say "y" to link the driver statically, or "m" to build a
 	  dynamically linked module called "g_hid".
 
+config USB_G_DBGP
+	tristate "EHCI Debug Device Gadget"
+	help
+	  This gadget emulates an EHCI Debug device. This is useful when you want
+	  to interact with an EHCI Debug Port.
+
+	  Say "y" to link the driver statically, or "m" to build a
+	  dynamically linked module called "g_dbgp".
+
+if USB_G_DBGP
+choice
+	prompt "EHCI Debug Device mode"
+	default USB_G_DBGP_SERIAL
+
+config USB_G_DBGP_PRINTK
+	depends on USB_G_DBGP
+	bool "printk"
+	help
+	  Directly printk() received data. No interaction.
+
+config USB_G_DBGP_SERIAL
+	depends on USB_G_DBGP
+	bool "serial"
+	help
+	  Userland can interact using /dev/ttyGSxxx.
+endchoice
+endif
+
 # put drivers that need isochronous transfer support (for audio
 # or video class gadget drivers), or specific hardware, here.
 config USB_G_WEBCAM
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 9bcde11..27283df 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -44,6 +44,7 @@ g_printer-objs			:= printer.o
 g_cdc-objs			:= cdc2.o
 g_multi-objs			:= multi.o
 g_hid-objs			:= hid.o
+g_dbgp-objs			:= dbgp.o
 g_nokia-objs			:= nokia.o
 g_webcam-objs			:= webcam.o
 
@@ -52,7 +53,6 @@ obj-$(CONFIG_USB_AUDIO)		+= g_audio.o
 obj-$(CONFIG_USB_ETH)		+= g_ether.o
 obj-$(CONFIG_USB_GADGETFS)	+= gadgetfs.o
 obj-$(CONFIG_USB_FUNCTIONFS)	+= g_ffs.o
-obj-$(CONFIG_USB_ETH_FUNCTIONFS)	+= g_eth_ffs.o
 obj-$(CONFIG_USB_FILE_STORAGE)	+= g_file_storage.o
 obj-$(CONFIG_USB_MASS_STORAGE)	+= g_mass_storage.o
 obj-$(CONFIG_USB_G_SERIAL)	+= g_serial.o
@@ -60,6 +60,7 @@ obj-$(CONFIG_USB_G_PRINTER)	+= g_printer.o
 obj-$(CONFIG_USB_MIDI_GADGET)	+= g_midi.o
 obj-$(CONFIG_USB_CDC_COMPOSITE) += g_cdc.o
 obj-$(CONFIG_USB_G_HID)		+= g_hid.o
+obj-$(CONFIG_USB_G_DBGP)	+= g_dbgp.o
 obj-$(CONFIG_USB_G_MULTI)	+= g_multi.o
 obj-$(CONFIG_USB_G_NOKIA)	+= g_nokia.o
 obj-$(CONFIG_USB_G_WEBCAM)	+= g_webcam.o
diff --git a/drivers/usb/gadget/audio.c b/drivers/usb/gadget/audio.c
index a62af7b..b744ccd 100644
--- a/drivers/usb/gadget/audio.c
+++ b/drivers/usb/gadget/audio.c
@@ -89,7 +89,7 @@ static const struct usb_descriptor_header *otg_desc[] = {
 
 /*-------------------------------------------------------------------------*/
 
-static int __init audio_do_config(struct usb_configuration *c)
+static int __ref audio_do_config(struct usb_configuration *c)
 {
 	/* FIXME alloc iConfiguration string, set it in c->strings */
 
@@ -113,7 +113,7 @@ static struct usb_configuration audio_config_driver = {
 
 /*-------------------------------------------------------------------------*/
 
-static int __init audio_bind(struct usb_composite_dev *cdev)
+static int __ref audio_bind(struct usb_composite_dev *cdev)
 {
 	int			gcnum;
 	int			status;
diff --git a/drivers/usb/gadget/cdc2.c b/drivers/usb/gadget/cdc2.c
index 928137d..1f5ba2f 100644
--- a/drivers/usb/gadget/cdc2.c
+++ b/drivers/usb/gadget/cdc2.c
@@ -129,7 +129,7 @@ static u8 hostaddr[ETH_ALEN];
 /*
  * We _always_ have both CDC ECM and CDC ACM functions.
  */
-static int __init cdc_do_config(struct usb_configuration *c)
+static int __ref cdc_do_config(struct usb_configuration *c)
 {
 	int	status;
 
@@ -159,7 +159,7 @@ static struct usb_configuration cdc_config_driver = {
 
 /*-------------------------------------------------------------------------*/
 
-static int __init cdc_bind(struct usb_composite_dev *cdev)
+static int __ref cdc_bind(struct usb_composite_dev *cdev)
 {
 	int			gcnum;
 	struct usb_gadget	*gadget = cdev->gadget;
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 391d169..e483f80 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -673,20 +673,83 @@ static int get_string(struct usb_composite_dev *cdev,
  * string IDs.  Drivers for functions, configurations, or gadgets will
  * then store that ID in the appropriate descriptors and string table.
  *
- * All string identifier should be allocated using this routine, to
- * ensure that for example different functions don't wrongly assign
- * different meanings to the same identifier.
+ * All string identifier should be allocated using this,
+ * @usb_string_ids_tab() or @usb_string_ids_n() routine, to ensure
+ * that for example different functions don't wrongly assign different
+ * meanings to the same identifier.
  */
 int usb_string_id(struct usb_composite_dev *cdev)
 {
 	if (cdev->next_string_id < 254) {
-		/* string id 0 is reserved */
+		/* string id 0 is reserved by USB spec for list of
+		 * supported languages */
+		/* 255 reserved as well? -- mina86 */
 		cdev->next_string_id++;
 		return cdev->next_string_id;
 	}
 	return -ENODEV;
 }
 
+/**
+ * usb_string_ids() - allocate unused string IDs in batch
+ * @cdev: the device whose string descriptor IDs are being allocated
+ * @str: an array of usb_string objects to assign numbers to
+ * Context: single threaded during gadget setup
+ *
+ * @usb_string_ids() is called from bind() callbacks to allocate
+ * string IDs.  Drivers for functions, configurations, or gadgets will
+ * then copy IDs from the string table to the appropriate descriptors
+ * and string table for other languages.
+ *
+ * All string identifier should be allocated using this,
+ * @usb_string_id() or @usb_string_ids_n() routine, to ensure that for
+ * example different functions don't wrongly assign different meanings
+ * to the same identifier.
+ */
+int usb_string_ids_tab(struct usb_composite_dev *cdev, struct usb_string *str)
+{
+	int next = cdev->next_string_id;
+
+	for (; str->s; ++str) {
+		if (unlikely(next >= 254))
+			return -ENODEV;
+		str->id = ++next;
+	}
+
+	cdev->next_string_id = next;
+
+	return 0;
+}
+
+/**
+ * usb_string_ids_n() - allocate unused string IDs in batch
+ * @cdev: the device whose string descriptor IDs are being allocated
+ * @n: number of string IDs to allocate
+ * Context: single threaded during gadget setup
+ *
+ * Returns the first requested ID.  This ID and next @n-1 IDs are now
+ * valid IDs.  At least providind that @n is non zore because if it
+ * is, returns last requested ID which is now very useful information.
+ *
+ * @usb_string_ids_n() is called from bind() callbacks to allocate
+ * string IDs.  Drivers for functions, configurations, or gadgets will
+ * then store that ID in the appropriate descriptors and string table.
+ *
+ * All string identifier should be allocated using this,
+ * @usb_string_id() or @usb_string_ids_n() routine, to ensure that for
+ * example different functions don't wrongly assign different meanings
+ * to the same identifier.
+ */
+int usb_string_ids_n(struct usb_composite_dev *c, unsigned n)
+{
+	unsigned next = c->next_string_id;
+	if (unlikely(n > 254 || (unsigned)next + n > 254))
+		return -ENODEV;
+	c->next_string_id += n;
+	return next + 1;
+}
+
+
 /*-------------------------------------------------------------------------*/
 
 static void composite_setup_complete(struct usb_ep *ep, struct usb_request *req)
@@ -893,6 +956,8 @@ static void composite_disconnect(struct usb_gadget *gadget)
 	spin_lock_irqsave(&cdev->lock, flags);
 	if (cdev->config)
 		reset_config(cdev);
+	if (composite->disconnect)
+		composite->disconnect(cdev);
 	spin_unlock_irqrestore(&cdev->lock, flags);
 }
 
diff --git a/drivers/usb/gadget/dbgp.c b/drivers/usb/gadget/dbgp.c
new file mode 100644
index 0000000..0ed50a2
--- /dev/null
+++ b/drivers/usb/gadget/dbgp.c
@@ -0,0 +1,434 @@
+/*
+ * dbgp.c -- EHCI Debug Port device gadget
+ *
+ * Copyright (C) 2010 Stephane Duverger
+ *
+ * Released under the GPLv2.
+ *
+ */
+
+/* verbose messages */
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+/* See comments in "zero.c" */
+#include "epautoconf.c"
+
+#ifdef CONFIG_USB_G_DBGP_SERIAL
+#include "u_serial.c"
+#endif
+
+#define DRIVER_VENDOR_ID	0x0525 /* NetChip */
+#define DRIVER_PRODUCT_ID	0xc0de /* undefined */
+
+#define USB_DEBUG_MAX_PACKET_SIZE     8
+#define DBGP_REQ_EP0_LEN              128
+#define DBGP_REQ_LEN                  512
+
+static struct dbgp {
+	struct usb_gadget  *gadget;
+	struct usb_request *req;
+	struct usb_ep      *i_ep;
+	struct usb_ep      *o_ep;
+#ifdef CONFIG_USB_G_DBGP_SERIAL
+	struct gserial     *serial;
+#endif
+} dbgp;
+
+static struct usb_device_descriptor device_desc = {
+	.bLength = sizeof device_desc,
+	.bDescriptorType = USB_DT_DEVICE,
+	.bcdUSB = __constant_cpu_to_le16(0x0200),
+	.bDeviceClass =	USB_CLASS_VENDOR_SPEC,
+	.idVendor = __constant_cpu_to_le16(DRIVER_VENDOR_ID),
+	.idProduct = __constant_cpu_to_le16(DRIVER_PRODUCT_ID),
+	.bNumConfigurations = 1,
+};
+
+static struct usb_debug_descriptor dbg_desc = {
+	.bLength = sizeof dbg_desc,
+	.bDescriptorType = USB_DT_DEBUG,
+};
+
+static struct usb_endpoint_descriptor i_desc = {
+	.bLength = USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType = USB_DT_ENDPOINT,
+	.bmAttributes = USB_ENDPOINT_XFER_BULK,
+	.bEndpointAddress = USB_DIR_IN,
+};
+
+static struct usb_endpoint_descriptor o_desc = {
+	.bLength = USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType = USB_DT_ENDPOINT,
+	.bmAttributes = USB_ENDPOINT_XFER_BULK,
+	.bEndpointAddress = USB_DIR_OUT,
+};
+
+#ifdef CONFIG_USB_G_DBGP_PRINTK
+static int dbgp_consume(char *buf, unsigned len)
+{
+	char c;
+
+	if (!len)
+		return 0;
+
+	c = buf[len-1];
+	if (c != 0)
+		buf[len-1] = 0;
+
+	printk(KERN_NOTICE "%s%c", buf, c);
+	return 0;
+}
+
+static void __disable_ep(struct usb_ep *ep)
+{
+	if (ep && ep->driver_data == dbgp.gadget) {
+		usb_ep_disable(ep);
+		ep->driver_data = NULL;
+	}
+}
+
+static void dbgp_disable_ep(void)
+{
+	__disable_ep(dbgp.i_ep);
+	__disable_ep(dbgp.o_ep);
+}
+
+static void dbgp_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	int stp;
+	int err = 0;
+	int status = req->status;
+
+	if (ep == dbgp.i_ep) {
+		stp = 1;
+		goto fail;
+	}
+
+	if (status != 0) {
+		stp = 2;
+		goto release_req;
+	}
+
+	dbgp_consume(req->buf, req->actual);
+
+	req->length = DBGP_REQ_LEN;
+	err = usb_ep_queue(ep, req, GFP_ATOMIC);
+	if (err < 0) {
+		stp = 3;
+		goto release_req;
+	}
+
+	return;
+
+release_req:
+	kfree(req->buf);
+	usb_ep_free_request(dbgp.o_ep, req);
+	dbgp_disable_ep();
+fail:
+	dev_dbg(&dbgp.gadget->dev,
+		"complete: failure (%d:%d) ==> %d\n", stp, err, status);
+}
+
+static int dbgp_enable_ep_req(struct usb_ep *ep)
+{
+	int err, stp;
+	struct usb_request *req;
+
+	req = usb_ep_alloc_request(ep, GFP_KERNEL);
+	if (!req) {
+		err = -ENOMEM;
+		stp = 1;
+		goto fail_1;
+	}
+
+	req->buf = kmalloc(DBGP_REQ_LEN, GFP_KERNEL);
+	if (!req->buf) {
+		err = -ENOMEM;
+		stp = 2;
+		goto fail_2;
+	}
+
+	req->complete = dbgp_complete;
+	req->length = DBGP_REQ_LEN;
+	err = usb_ep_queue(ep, req, GFP_ATOMIC);
+	if (err < 0) {
+		stp = 3;
+		goto fail_3;
+	}
+
+	return 0;
+
+fail_3:
+	kfree(req->buf);
+fail_2:
+	usb_ep_free_request(dbgp.o_ep, req);
+fail_1:
+	dev_dbg(&dbgp.gadget->dev,
+		"enable ep req: failure (%d:%d)\n", stp, err);
+	return err;
+}
+
+static int __enable_ep(struct usb_ep *ep, struct usb_endpoint_descriptor *desc)
+{
+	int err = usb_ep_enable(ep, desc);
+	ep->driver_data = dbgp.gadget;
+	return err;
+}
+
+static int dbgp_enable_ep(void)
+{
+	int err, stp;
+
+	err = __enable_ep(dbgp.i_ep, &i_desc);
+	if (err < 0) {
+		stp = 1;
+		goto fail_1;
+	}
+
+	err = __enable_ep(dbgp.o_ep, &o_desc);
+	if (err < 0) {
+		stp = 2;
+		goto fail_2;
+	}
+
+	err = dbgp_enable_ep_req(dbgp.o_ep);
+	if (err < 0) {
+		stp = 3;
+		goto fail_3;
+	}
+
+	return 0;
+
+fail_3:
+	__disable_ep(dbgp.o_ep);
+fail_2:
+	__disable_ep(dbgp.i_ep);
+fail_1:
+	dev_dbg(&dbgp.gadget->dev, "enable ep: failure (%d:%d)\n", stp, err);
+	return err;
+}
+#endif
+
+static void dbgp_disconnect(struct usb_gadget *gadget)
+{
+#ifdef CONFIG_USB_G_DBGP_PRINTK
+	dbgp_disable_ep();
+#else
+	gserial_disconnect(dbgp.serial);
+#endif
+}
+
+static void dbgp_unbind(struct usb_gadget *gadget)
+{
+#ifdef CONFIG_USB_G_DBGP_SERIAL
+	kfree(dbgp.serial);
+#endif
+	if (dbgp.req) {
+		kfree(dbgp.req->buf);
+		usb_ep_free_request(gadget->ep0, dbgp.req);
+	}
+
+	gadget->ep0->driver_data = NULL;
+}
+
+static int __init dbgp_configure_endpoints(struct usb_gadget *gadget)
+{
+	int stp;
+
+	usb_ep_autoconfig_reset(gadget);
+
+	dbgp.i_ep = usb_ep_autoconfig(gadget, &i_desc);
+	if (!dbgp.i_ep) {
+		stp = 1;
+		goto fail_1;
+	}
+
+	dbgp.i_ep->driver_data = gadget;
+	i_desc.wMaxPacketSize =
+		__constant_cpu_to_le16(USB_DEBUG_MAX_PACKET_SIZE);
+
+	dbgp.o_ep = usb_ep_autoconfig(gadget, &o_desc);
+	if (!dbgp.o_ep) {
+		dbgp.i_ep->driver_data = NULL;
+		stp = 2;
+		goto fail_2;
+	}
+
+	dbgp.o_ep->driver_data = gadget;
+	o_desc.wMaxPacketSize =
+		__constant_cpu_to_le16(USB_DEBUG_MAX_PACKET_SIZE);
+
+	dbg_desc.bDebugInEndpoint = i_desc.bEndpointAddress & 0x7f;
+	dbg_desc.bDebugOutEndpoint = o_desc.bEndpointAddress & 0x7f;
+
+#ifdef CONFIG_USB_G_DBGP_SERIAL
+	dbgp.serial->in = dbgp.i_ep;
+	dbgp.serial->out = dbgp.o_ep;
+
+	dbgp.serial->in_desc = &i_desc;
+	dbgp.serial->out_desc = &o_desc;
+
+	if (gserial_setup(gadget, 1) < 0) {
+		stp = 3;
+		goto fail_3;
+	}
+
+	return 0;
+
+fail_3:
+	dbgp.o_ep->driver_data = NULL;
+#else
+	return 0;
+#endif
+fail_2:
+	dbgp.i_ep->driver_data = NULL;
+fail_1:
+	dev_dbg(&dbgp.gadget->dev, "ep config: failure (%d)\n", stp);
+	return -ENODEV;
+}
+
+static int __init dbgp_bind(struct usb_gadget *gadget)
+{
+	int err, stp;
+
+	dbgp.gadget = gadget;
+
+	dbgp.req = usb_ep_alloc_request(gadget->ep0, GFP_KERNEL);
+	if (!dbgp.req) {
+		err = -ENOMEM;
+		stp = 1;
+		goto fail;
+	}
+
+	dbgp.req->buf = kmalloc(DBGP_REQ_EP0_LEN, GFP_KERNEL);
+	if (!dbgp.req->buf) {
+		err = -ENOMEM;
+		stp = 2;
+		goto fail;
+	}
+
+	dbgp.req->length = DBGP_REQ_EP0_LEN;
+	gadget->ep0->driver_data = gadget;
+
+#ifdef CONFIG_USB_G_DBGP_SERIAL
+	dbgp.serial = kzalloc(sizeof(struct gserial), GFP_KERNEL);
+	if (!dbgp.serial) {
+		stp = 3;
+		err = -ENOMEM;
+		goto fail;
+	}
+#endif
+	err = dbgp_configure_endpoints(gadget);
+	if (err < 0) {
+		stp = 4;
+		goto fail;
+	}
+
+	dev_dbg(&dbgp.gadget->dev, "bind: success\n");
+	return 0;
+
+fail:
+	dev_dbg(&gadget->dev, "bind: failure (%d:%d)\n", stp, err);
+	dbgp_unbind(gadget);
+	return err;
+}
+
+static void dbgp_setup_complete(struct usb_ep *ep,
+				struct usb_request *req)
+{
+	dev_dbg(&dbgp.gadget->dev, "setup complete: %d, %d/%d\n",
+		req->status, req->actual, req->length);
+}
+
+static int dbgp_setup(struct usb_gadget *gadget,
+		      const struct usb_ctrlrequest *ctrl)
+{
+	struct usb_request *req = dbgp.req;
+	u8 request = ctrl->bRequest;
+	u16 value = le16_to_cpu(ctrl->wValue);
+	u16 length = le16_to_cpu(ctrl->wLength);
+	int err = 0;
+	void *data;
+	u16 len;
+
+	gadget->ep0->driver_data = gadget;
+
+	if (request == USB_REQ_GET_DESCRIPTOR) {
+		switch (value>>8) {
+		case USB_DT_DEVICE:
+			dev_dbg(&dbgp.gadget->dev, "setup: desc device\n");
+			len = sizeof device_desc;
+			data = &device_desc;
+			break;
+		case USB_DT_DEBUG:
+			dev_dbg(&dbgp.gadget->dev, "setup: desc debug\n");
+			len = sizeof dbg_desc;
+			data = &dbg_desc;
+			break;
+		default:
+			goto fail;
+		}
+	} else if (request == USB_REQ_SET_FEATURE &&
+		   value == USB_DEVICE_DEBUG_MODE) {
+		len = 0;
+		data = NULL;
+		dev_dbg(&dbgp.gadget->dev, "setup: feat debug\n");
+#ifdef CONFIG_USB_G_DBGP_PRINTK
+		err = dbgp_enable_ep();
+#else
+		err = gserial_connect(dbgp.serial, 0);
+#endif
+		if (err < 0)
+			goto fail;
+	} else
+		goto fail;
+
+	if (len >= 0) {
+		req->length = min(length, len);
+		req->zero = len < req->length;
+		if (data && req->length)
+			memcpy(req->buf, data, req->length);
+
+		req->complete = dbgp_setup_complete;
+		return usb_ep_queue(gadget->ep0, req, GFP_ATOMIC);
+	}
+
+fail:
+	dev_dbg(&dbgp.gadget->dev,
+		"setup: failure req %x v %x\n", request, value);
+	return err;
+}
+
+static struct usb_gadget_driver dbgp_driver = {
+	.function = "dbgp",
+	.speed = USB_SPEED_HIGH,
+	.bind = dbgp_bind,
+	.unbind = dbgp_unbind,
+	.setup = dbgp_setup,
+	.disconnect = dbgp_disconnect,
+	.driver	= {
+		.owner = THIS_MODULE,
+		.name = "dbgp"
+	},
+};
+
+static int __init dbgp_init(void)
+{
+	return usb_gadget_register_driver(&dbgp_driver);
+}
+
+static void __exit dbgp_exit(void)
+{
+	usb_gadget_unregister_driver(&dbgp_driver);
+#ifdef CONFIG_USB_G_DBGP_SERIAL
+	gserial_cleanup();
+#endif
+}
+
+MODULE_AUTHOR("Stephane Duverger");
+MODULE_LICENSE("GPL");
+module_init(dbgp_init);
+module_exit(dbgp_exit);
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index 4f9e578..dc65462 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -1542,7 +1542,7 @@ static int dummy_hub_status (struct usb_hcd *hcd, char *buf)
 	dum = hcd_to_dummy (hcd);
 
 	spin_lock_irqsave (&dum->lock, flags);
-	if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))
+	if (!HCD_HW_ACCESSIBLE(hcd))
 		goto done;
 
 	if (dum->resuming && time_after_eq (jiffies, dum->re_timeout)) {
@@ -1588,7 +1588,7 @@ static int dummy_hub_control (
 	int		retval = 0;
 	unsigned long	flags;
 
-	if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))
+	if (!HCD_HW_ACCESSIBLE(hcd))
 		return -ETIMEDOUT;
 
 	dum = hcd_to_dummy (hcd);
@@ -1739,7 +1739,7 @@ static int dummy_bus_resume (struct usb_hcd *hcd)
 	dev_dbg (&hcd->self.root_hub->dev, "%s\n", __func__);
 
 	spin_lock_irq (&dum->lock);
-	if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
+	if (!HCD_HW_ACCESSIBLE(hcd)) {
 		rc = -ESHUTDOWN;
 	} else {
 		dum->rh_state = DUMMY_RH_RUNNING;
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index 400f803..114fa02 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -237,7 +237,7 @@ static u8 hostaddr[ETH_ALEN];
  * the first one present.  That's to make Microsoft's drivers happy,
  * and to follow DOCSIS 1.0 (cable modem standard).
  */
-static int __init rndis_do_config(struct usb_configuration *c)
+static int __ref rndis_do_config(struct usb_configuration *c)
 {
 	/* FIXME alloc iConfiguration string, set it in c->strings */
 
@@ -270,7 +270,7 @@ MODULE_PARM_DESC(use_eem, "use CDC EEM mode");
 /*
  * We _always_ have an ECM, CDC Subset, or EEM configuration.
  */
-static int __init eth_do_config(struct usb_configuration *c)
+static int __ref eth_do_config(struct usb_configuration *c)
 {
 	/* FIXME alloc iConfiguration string, set it in c->strings */
 
@@ -297,7 +297,7 @@ static struct usb_configuration eth_config_driver = {
 
 /*-------------------------------------------------------------------------*/
 
-static int __init eth_bind(struct usb_composite_dev *cdev)
+static int __ref eth_bind(struct usb_composite_dev *cdev)
 {
 	int			gcnum;
 	struct usb_gadget	*gadget = cdev->gadget;
diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c
index 2aaa0f7..e4f5950 100644
--- a/drivers/usb/gadget/f_fs.c
+++ b/drivers/usb/gadget/f_fs.c
@@ -714,9 +714,7 @@ static long ffs_ep0_ioctl(struct file *file, unsigned code, unsigned long value)
 		struct ffs_function *func = ffs->func;
 		ret = func ? ffs_func_revmap_intf(func, value) : -ENODEV;
 	} else if (gadget->ops->ioctl) {
-		lock_kernel();
 		ret = gadget->ops->ioctl(gadget, code, value);
-		unlock_kernel();
 	} else {
 		ret = -ENOTTY;
 	}
@@ -1377,7 +1375,8 @@ static void ffs_data_reset(struct ffs_data *ffs)
 
 static int functionfs_bind(struct ffs_data *ffs, struct usb_composite_dev *cdev)
 {
-	unsigned i, count;
+	struct usb_gadget_strings **lang;
+	int first_id;
 
 	ENTER();
 
@@ -1385,7 +1384,9 @@ static int functionfs_bind(struct ffs_data *ffs, struct usb_composite_dev *cdev)
 		 || test_and_set_bit(FFS_FL_BOUND, &ffs->flags)))
 		return -EBADFD;
 
-	ffs_data_get(ffs);
+	first_id = usb_string_ids_n(cdev, ffs->strings_count);
+	if (unlikely(first_id < 0))
+		return first_id;
 
 	ffs->ep0req = usb_ep_alloc_request(cdev->gadget->ep0, GFP_KERNEL);
 	if (unlikely(!ffs->ep0req))
@@ -1393,25 +1394,16 @@ static int functionfs_bind(struct ffs_data *ffs, struct usb_composite_dev *cdev)
 	ffs->ep0req->complete = ffs_ep0_complete;
 	ffs->ep0req->context = ffs;
 
-	/* Get strings identifiers */
-	for (count = ffs->strings_count, i = 0; i < count; ++i) {
-		struct usb_gadget_strings **lang;
-
-		int id = usb_string_id(cdev);
-		if (unlikely(id < 0)) {
-			usb_ep_free_request(cdev->gadget->ep0, ffs->ep0req);
-			ffs->ep0req = NULL;
-			return id;
-		}
-
-		lang = ffs->stringtabs;
-		do {
-			(*lang)->strings[i].id = id;
-			++lang;
-		} while (*lang);
+	lang = ffs->stringtabs;
+	for (lang = ffs->stringtabs; *lang; ++lang) {
+		struct usb_string *str = (*lang)->strings;
+		int id = first_id;
+		for (; str->s; ++id, ++str)
+			str->id = id;
 	}
 
 	ffs->gadget = cdev->gadget;
+	ffs_data_get(ffs);
 	return 0;
 }
 
@@ -1480,9 +1472,9 @@ static void ffs_epfiles_destroy(struct ffs_epfile *epfiles, unsigned count)
 }
 
 
-static int functionfs_add(struct usb_composite_dev *cdev,
-			  struct usb_configuration *c,
-			  struct ffs_data *ffs)
+static int functionfs_bind_config(struct usb_composite_dev *cdev,
+				  struct usb_configuration *c,
+				  struct ffs_data *ffs)
 {
 	struct ffs_function *func;
 	int ret;
diff --git a/drivers/usb/gadget/f_hid.c b/drivers/usb/gadget/f_hid.c
index 9447427..111b85c 100644
--- a/drivers/usb/gadget/f_hid.c
+++ b/drivers/usb/gadget/f_hid.c
@@ -142,7 +142,7 @@ static struct usb_descriptor_header *hidg_fs_descriptors[] = {
 static ssize_t f_hidg_read(struct file *file, char __user *buffer,
 			size_t count, loff_t *ptr)
 {
-	struct f_hidg	*hidg     = (struct f_hidg *)file->private_data;
+	struct f_hidg	*hidg     = file->private_data;
 	char		*tmp_buff = NULL;
 	unsigned long	flags;
 
@@ -200,7 +200,7 @@ static void f_hidg_req_complete(struct usb_ep *ep, struct usb_request *req)
 static ssize_t f_hidg_write(struct file *file, const char __user *buffer,
 			    size_t count, loff_t *offp)
 {
-	struct f_hidg *hidg  = (struct f_hidg *)file->private_data;
+	struct f_hidg *hidg  = file->private_data;
 	ssize_t status = -ENOMEM;
 
 	if (!access_ok(VERIFY_READ, buffer, count))
@@ -257,7 +257,7 @@ static ssize_t f_hidg_write(struct file *file, const char __user *buffer,
 
 static unsigned int f_hidg_poll(struct file *file, poll_table *wait)
 {
-	struct f_hidg	*hidg  = (struct f_hidg *)file->private_data;
+	struct f_hidg	*hidg  = file->private_data;
 	unsigned int	ret = 0;
 
 	poll_wait(file, &hidg->read_queue, wait);
diff --git a/drivers/usb/gadget/f_loopback.c b/drivers/usb/gadget/f_loopback.c
index e91d1b1..4322587 100644
--- a/drivers/usb/gadget/f_loopback.c
+++ b/drivers/usb/gadget/f_loopback.c
@@ -324,7 +324,7 @@ static void loopback_disable(struct usb_function *f)
 
 /*-------------------------------------------------------------------------*/
 
-static int __init loopback_bind_config(struct usb_configuration *c)
+static int __ref loopback_bind_config(struct usb_configuration *c)
 {
 	struct f_loopback	*loop;
 	int			status;
@@ -346,7 +346,7 @@ static int __init loopback_bind_config(struct usb_configuration *c)
 	return status;
 }
 
-static struct usb_configuration loopback_driver = {
+static  struct usb_configuration loopback_driver = {
 	.label		= "loopback",
 	.strings	= loopback_strings,
 	.bind		= loopback_bind_config,
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index 4ce899c..32cce02 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -316,6 +316,27 @@ static const char fsg_string_interface[] = "Mass Storage";
 /*-------------------------------------------------------------------------*/
 
 struct fsg_dev;
+struct fsg_common;
+
+/* FSF callback functions */
+struct fsg_operations {
+	/* Callback function to call when thread exits.  If no
+	 * callback is set or it returns value lower then zero MSF
+	 * will force eject all LUNs it operates on (including those
+	 * marked as non-removable or with prevent_medium_removal flag
+	 * set). */
+	int (*thread_exits)(struct fsg_common *common);
+
+	/* Called prior to ejection.  Negative return means error,
+	 * zero means to continue with ejection, positive means not to
+	 * eject. */
+	int (*pre_eject)(struct fsg_common *common,
+			 struct fsg_lun *lun, int num);
+	/* Called after ejection.  Negative return means error, zero
+	 * or positive is just a success. */
+	int (*post_eject)(struct fsg_common *common,
+			  struct fsg_lun *lun, int num);
+};
 
 
 /* Data shared by all the FSG instances. */
@@ -333,7 +354,6 @@ struct fsg_common {
 	struct usb_ep		*ep0;		/* Copy of gadget->ep0 */
 	struct usb_request	*ep0req;	/* Copy of cdev->req */
 	unsigned int		ep0_req_tag;
-	const char		*ep0req_name;
 
 	struct fsg_buffhd	*next_buffhd_to_fill;
 	struct fsg_buffhd	*next_buffhd_to_drain;
@@ -369,8 +389,8 @@ struct fsg_common {
 	struct completion	thread_notifier;
 	struct task_struct	*thread_task;
 
-	/* Callback function to call when thread exits. */
-	int			(*thread_exits)(struct fsg_common *common);
+	/* Callback functions. */
+	const struct fsg_operations	*ops;
 	/* Gadget's private data. */
 	void			*private_data;
 
@@ -394,12 +414,8 @@ struct fsg_config {
 	const char		*lun_name_format;
 	const char		*thread_name;
 
-	/* Callback function to call when thread exits.  If no
-	 * callback is set or it returns value lower then zero MSF
-	 * will force eject all LUNs it operates on (including those
-	 * marked as non-removable or with prevent_medium_removal flag
-	 * set). */
-	int			(*thread_exits)(struct fsg_common *common);
+	/* Callback functions. */
+	const struct fsg_operations	*ops;
 	/* Gadget's private data. */
 	void			*private_data;
 
@@ -435,6 +451,7 @@ static inline int __fsg_is_set(struct fsg_common *common,
 	if (common->fsg)
 		return 1;
 	ERROR(common, "common->fsg is NULL in %s at %u\n", func, line);
+	WARN_ON(1);
 	return 0;
 }
 
@@ -623,8 +640,6 @@ static int fsg_setup(struct usb_function *f,
 
 		/* Respond with data/status */
 		req->length = min((u16)1, w_length);
-		fsg->common->ep0req_name =
-			ctrl->bRequestType & USB_DIR_IN ? "ep0-in" : "ep0-out";
 		return ep0_queue(fsg->common);
 	}
 
@@ -1395,43 +1410,55 @@ static int do_start_stop(struct fsg_common *common)
 	} else if (!curlun->removable) {
 		curlun->sense_data = SS_INVALID_COMMAND;
 		return -EINVAL;
-	}
-
-	loej = common->cmnd[4] & 0x02;
-	start = common->cmnd[4] & 0x01;
-
-	/* eject code from file_storage.c:do_start_stop() */
-
-	if ((common->cmnd[1] & ~0x01) != 0 ||	  /* Mask away Immed */
-		(common->cmnd[4] & ~0x03) != 0) { /* Mask LoEj, Start */
+	} else if ((common->cmnd[1] & ~0x01) != 0 || /* Mask away Immed */
+		   (common->cmnd[4] & ~0x03) != 0) { /* Mask LoEj, Start */
 		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
 		return -EINVAL;
 	}
 
-	if (!start) {
-		/* Are we allowed to unload the media? */
-		if (curlun->prevent_medium_removal) {
-			LDBG(curlun, "unload attempt prevented\n");
-			curlun->sense_data = SS_MEDIUM_REMOVAL_PREVENTED;
-			return -EINVAL;
-		}
-		if (loej) {	/* Simulate an unload/eject */
-			up_read(&common->filesem);
-			down_write(&common->filesem);
-			fsg_lun_close(curlun);
-			up_write(&common->filesem);
-			down_read(&common->filesem);
-		}
-	} else {
+	loej  = common->cmnd[4] & 0x02;
+	start = common->cmnd[4] & 0x01;
 
-		/* Our emulation doesn't support mounting; the medium is
-		 * available for use as soon as it is loaded. */
+	/* Our emulation doesn't support mounting; the medium is
+	 * available for use as soon as it is loaded. */
+	if (start) {
 		if (!fsg_lun_is_open(curlun)) {
 			curlun->sense_data = SS_MEDIUM_NOT_PRESENT;
 			return -EINVAL;
 		}
+		return 0;
 	}
-	return 0;
+
+	/* Are we allowed to unload the media? */
+	if (curlun->prevent_medium_removal) {
+		LDBG(curlun, "unload attempt prevented\n");
+		curlun->sense_data = SS_MEDIUM_REMOVAL_PREVENTED;
+		return -EINVAL;
+	}
+
+	if (!loej)
+		return 0;
+
+	/* Simulate an unload/eject */
+	if (common->ops && common->ops->pre_eject) {
+		int r = common->ops->pre_eject(common, curlun,
+					       curlun - common->luns);
+		if (unlikely(r < 0))
+			return r;
+		else if (r)
+			return 0;
+	}
+
+	up_read(&common->filesem);
+	down_write(&common->filesem);
+	fsg_lun_close(curlun);
+	up_write(&common->filesem);
+	down_read(&common->filesem);
+
+	return common->ops && common->ops->post_eject
+		? min(0, common->ops->post_eject(common, curlun,
+						 curlun - common->luns))
+		: 0;
 }
 
 
@@ -2610,7 +2637,8 @@ static int fsg_main_thread(void *common_)
 	common->thread_task = NULL;
 	spin_unlock_irq(&common->lock);
 
-	if (!common->thread_exits || common->thread_exits(common) < 0) {
+	if (!common->ops || !common->ops->thread_exits
+	 || common->ops->thread_exits(common) < 0) {
 		struct fsg_lun *curlun = common->luns;
 		unsigned i = common->nluns;
 
@@ -2686,6 +2714,7 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common,
 		common->free_storage_on_release = 0;
 	}
 
+	common->ops = cfg->ops;
 	common->private_data = cfg->private_data;
 
 	common->gadget = gadget;
@@ -2807,7 +2836,6 @@ buffhds_first_it:
 
 
 	/* Tell the thread to start working */
-	common->thread_exits = cfg->thread_exits;
 	common->thread_task =
 		kthread_create(fsg_main_thread, common,
 			       OR(cfg->thread_name, "file-storage"));
@@ -2990,9 +3018,9 @@ static struct usb_gadget_strings *fsg_strings_array[] = {
 	NULL,
 };
 
-static int fsg_add(struct usb_composite_dev *cdev,
-		   struct usb_configuration *c,
-		   struct fsg_common *common)
+static int fsg_bind_config(struct usb_composite_dev *cdev,
+			   struct usb_configuration *c,
+			   struct fsg_common *common)
 {
 	struct fsg_dev *fsg;
 	int rc;
@@ -3024,6 +3052,13 @@ static int fsg_add(struct usb_composite_dev *cdev,
 	return rc;
 }
 
+static inline int __deprecated __maybe_unused
+fsg_add(struct usb_composite_dev *cdev,
+	struct usb_configuration *c,
+	struct fsg_common *common)
+{
+	return fsg_bind_config(cdev, c, common);
+}
 
 
 /************************* Module parameters *************************/
@@ -3096,8 +3131,8 @@ fsg_config_from_params(struct fsg_config *cfg,
 	cfg->product_name = 0;
 	cfg->release = 0xffff;
 
-	cfg->thread_exits = 0;
-	cfg->private_data = 0;
+	cfg->ops = NULL;
+	cfg->private_data = NULL;
 
 	/* Finalise */
 	cfg->can_stall = params->stall;
diff --git a/drivers/usb/gadget/f_sourcesink.c b/drivers/usb/gadget/f_sourcesink.c
index 6d3cc44..685d768 100644
--- a/drivers/usb/gadget/f_sourcesink.c
+++ b/drivers/usb/gadget/f_sourcesink.c
@@ -404,7 +404,7 @@ static void sourcesink_disable(struct usb_function *f)
 
 /*-------------------------------------------------------------------------*/
 
-static int __init sourcesink_bind_config(struct usb_configuration *c)
+static int __ref sourcesink_bind_config(struct usb_configuration *c)
 {
 	struct f_sourcesink	*ss;
 	int			status;
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index b49d86e..a857b7a 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -56,7 +56,7 @@
  * following protocols: RBC (0x01), ATAPI or SFF-8020i (0x02), QIC-157 (0c03),
  * UFI (0x04), SFF-8070i (0x05), and transparent SCSI (0x06), selected by
  * the optional "protocol" module parameter.  In addition, the default
- * Vendor ID, Product ID, and release number can be overridden.
+ * Vendor ID, Product ID, release number and serial number can be overridden.
  *
  * There is support for multiple logical units (LUNs), each of which has
  * its own backing file.  The number of LUNs can be set using the optional
@@ -93,6 +93,8 @@
  *	removable		Default false, boolean for removable media
  *	luns=N			Default N = number of filenames, number of
  *					LUNs to support
+ *	nofua=b[,b...]		Default false, booleans for ignore FUA flag
+ *					in SCSI WRITE(10,12) commands
  *	stall			Default determined according to the type of
  *					USB device controller (usually true),
  *					boolean to permit the driver to halt
@@ -106,17 +108,18 @@
  *	vendor=0xVVVV		Default 0x0525 (NetChip), USB Vendor ID
  *	product=0xPPPP		Default 0xa4a5 (FSG), USB Product ID
  *	release=0xRRRR		Override the USB release number (bcdDevice)
+ *	serial=HHHH...		Override serial number (string of hex chars)
  *	buflen=N		Default N=16384, buffer size used (will be
  *					rounded down to a multiple of
  *					PAGE_CACHE_SIZE)
  *
  * If CONFIG_USB_FILE_STORAGE_TEST is not set, only the "file", "ro",
- * "removable", "luns", "stall", and "cdrom" options are available; default
- * values are used for everything else.
+ * "removable", "luns", "nofua", "stall", and "cdrom" options are available;
+ * default values are used for everything else.
  *
  * The pathnames of the backing files and the ro settings are available in
- * the attribute files "file" and "ro" in the lun<n> subdirectory of the
- * gadget's sysfs directory.  If the "removable" option is set, writing to
+ * the attribute files "file", "nofua", and "ro" in the lun<n> subdirectory of
+ * the gadget's sysfs directory.  If the "removable" option is set, writing to
  * these files will simulate ejecting/loading the medium (writing an empty
  * line means eject) and adjusting a write-enable tab.  Changes to the ro
  * setting are not allowed when the medium is loaded or if CD-ROM emulation
@@ -270,6 +273,8 @@
 
 #define DRIVER_DESC		"File-backed Storage Gadget"
 #define DRIVER_NAME		"g_file_storage"
+/* DRIVER_VERSION must be at least 6 characters long, as it is used
+ * to generate a fallback serial number. */
 #define DRIVER_VERSION		"20 November 2008"
 
 static       char fsg_string_manufacturer[64];
@@ -301,8 +306,10 @@ MODULE_LICENSE("Dual BSD/GPL");
 static struct {
 	char		*file[FSG_MAX_LUNS];
 	int		ro[FSG_MAX_LUNS];
+	int		nofua[FSG_MAX_LUNS];
 	unsigned int	num_filenames;
 	unsigned int	num_ros;
+	unsigned int	num_nofuas;
 	unsigned int	nluns;
 
 	int		removable;
@@ -314,6 +321,7 @@ static struct {
 	unsigned short	vendor;
 	unsigned short	product;
 	unsigned short	release;
+	char		*serial;
 	unsigned int	buflen;
 
 	int		transport_type;
@@ -341,6 +349,10 @@ MODULE_PARM_DESC(file, "names of backing files or devices");
 module_param_array_named(ro, mod_data.ro, bool, &mod_data.num_ros, S_IRUGO);
 MODULE_PARM_DESC(ro, "true to force read-only");
 
+module_param_array_named(nofua, mod_data.nofua, bool, &mod_data.num_nofuas,
+		S_IRUGO);
+MODULE_PARM_DESC(nofua, "true to ignore SCSI WRITE(10,12) FUA bit");
+
 module_param_named(luns, mod_data.nluns, uint, S_IRUGO);
 MODULE_PARM_DESC(luns, "number of LUNs");
 
@@ -353,6 +365,8 @@ MODULE_PARM_DESC(stall, "false to prevent bulk stalls");
 module_param_named(cdrom, mod_data.cdrom, bool, S_IRUGO);
 MODULE_PARM_DESC(cdrom, "true to emulate cdrom instead of disk");
 
+module_param_named(serial, mod_data.serial, charp, S_IRUGO);
+MODULE_PARM_DESC(serial, "USB serial number");
 
 /* In the non-TEST version, only the module parameters listed above
  * are available. */
@@ -1272,7 +1286,8 @@ static int do_write(struct fsg_dev *fsg)
 			curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
 			return -EINVAL;
 		}
-		if (fsg->cmnd[1] & 0x08) {	// FUA
+		/* FUA */
+		if (!curlun->nofua && (fsg->cmnd[1] & 0x08)) {
 			spin_lock(&curlun->filp->f_lock);
 			curlun->filp->f_flags |= O_DSYNC;
 			spin_unlock(&curlun->filp->f_lock);
@@ -3126,6 +3141,7 @@ static int fsg_main_thread(void *fsg_)
 
 /* The write permissions and store_xxx pointers are set in fsg_bind() */
 static DEVICE_ATTR(ro, 0444, fsg_show_ro, NULL);
+static DEVICE_ATTR(nofua, 0644, fsg_show_nofua, NULL);
 static DEVICE_ATTR(file, 0444, fsg_show_file, NULL);
 
 
@@ -3197,6 +3213,7 @@ static int __init check_parameters(struct fsg_dev *fsg)
 {
 	int	prot;
 	int	gcnum;
+	int	i;
 
 	/* Store the default values */
 	mod_data.transport_type = USB_PR_BULK;
@@ -3272,13 +3289,65 @@ static int __init check_parameters(struct fsg_dev *fsg)
 		ERROR(fsg, "invalid buflen\n");
 		return -ETOOSMALL;
 	}
+
 #endif /* CONFIG_USB_FILE_STORAGE_TEST */
 
+	/* Serial string handling.
+	 * On a real device, the serial string would be loaded
+	 * from permanent storage. */
+	if (mod_data.serial) {
+		const char *ch;
+		unsigned len = 0;
+
+		/* Sanity check :
+		 * The CB[I] specification limits the serial string to
+		 * 12 uppercase hexadecimal characters.
+		 * BBB need at least 12 uppercase hexadecimal characters,
+		 * with a maximum of 126. */
+		for (ch = mod_data.serial; *ch; ++ch) {
+			++len;
+			if ((*ch < '0' || *ch > '9') &&
+			    (*ch < 'A' || *ch > 'F')) { /* not uppercase hex */
+				WARNING(fsg,
+					"Invalid serial string character: %c; "
+					"Failing back to default\n",
+					*ch);
+				goto fill_serial;
+			}
+		}
+		if (len > 126 ||
+		    (mod_data.transport_type == USB_PR_BULK && len < 12) ||
+		    (mod_data.transport_type != USB_PR_BULK && len > 12)) {
+			WARNING(fsg,
+				"Invalid serial string length; "
+				"Failing back to default\n");
+			goto fill_serial;
+		}
+		fsg_strings[FSG_STRING_SERIAL - 1].s = mod_data.serial;
+	} else {
+		WARNING(fsg,
+			"Userspace failed to provide serial number; "
+			"Failing back to default\n");
+fill_serial:
+		/* Serial number not specified or invalid, make our own.
+		 * We just encode it from the driver version string,
+		 * 12 characters to comply with both CB[I] and BBB spec.
+		 * Warning : Two devices running the same kernel will have
+		 * the same fallback serial number. */
+		for (i = 0; i < 12; i += 2) {
+			unsigned char	c = DRIVER_VERSION[i / 2];
+
+			if (!c)
+				break;
+			sprintf(&fsg_string_serial[i], "%02X", c);
+		}
+	}
+
 	return 0;
 }
 
 
-static int __init fsg_bind(struct usb_gadget *gadget)
+static int __ref fsg_bind(struct usb_gadget *gadget)
 {
 	struct fsg_dev		*fsg = the_fsg;
 	int			rc;
@@ -3305,6 +3374,10 @@ static int __init fsg_bind(struct usb_gadget *gadget)
 		}
 	}
 
+	/* Only for removable media? */
+	dev_attr_nofua.attr.mode = 0644;
+	dev_attr_nofua.store = fsg_store_nofua;
+
 	/* Find out how many LUNs there should be */
 	i = mod_data.nluns;
 	if (i == 0)
@@ -3330,6 +3403,7 @@ static int __init fsg_bind(struct usb_gadget *gadget)
 		curlun->ro = mod_data.cdrom || mod_data.ro[i];
 		curlun->initially_ro = curlun->ro;
 		curlun->removable = mod_data.removable;
+		curlun->nofua = mod_data.nofua[i];
 		curlun->dev.release = lun_release;
 		curlun->dev.parent = &gadget->dev;
 		curlun->dev.driver = &fsg_driver.driver;
@@ -3344,6 +3418,8 @@ static int __init fsg_bind(struct usb_gadget *gadget)
 		if ((rc = device_create_file(&curlun->dev,
 					&dev_attr_ro)) != 0 ||
 				(rc = device_create_file(&curlun->dev,
+					&dev_attr_nofua)) != 0 ||
+				(rc = device_create_file(&curlun->dev,
 					&dev_attr_file)) != 0) {
 			device_unregister(&curlun->dev);
 			goto out;
@@ -3447,16 +3523,6 @@ static int __init fsg_bind(struct usb_gadget *gadget)
 			init_utsname()->sysname, init_utsname()->release,
 			gadget->name);
 
-	/* On a real device, serial[] would be loaded from permanent
-	 * storage.  We just encode it from the driver version string. */
-	for (i = 0; i < sizeof fsg_string_serial - 2; i += 2) {
-		unsigned char		c = DRIVER_VERSION[i / 2];
-
-		if (!c)
-			break;
-		sprintf(&fsg_string_serial[i], "%02X", c);
-	}
-
 	fsg->thread_task = kthread_create(fsg_main_thread, fsg,
 			"file-storage-gadget");
 	if (IS_ERR(fsg->thread_task)) {
@@ -3478,8 +3544,8 @@ static int __init fsg_bind(struct usb_gadget *gadget)
 				if (IS_ERR(p))
 					p = NULL;
 			}
-			LINFO(curlun, "ro=%d, file: %s\n",
-					curlun->ro, (p ? p : "(error)"));
+			LINFO(curlun, "ro=%d, nofua=%d, file: %s\n",
+			      curlun->ro, curlun->nofua, (p ? p : "(error)"));
 		}
 	}
 	kfree(pathbuf);
diff --git a/drivers/usb/gadget/g_ffs.c b/drivers/usb/gadget/g_ffs.c
index d1af253..a9474f8 100644
--- a/drivers/usb/gadget/g_ffs.c
+++ b/drivers/usb/gadget/g_ffs.c
@@ -32,12 +32,13 @@
 #  include "u_ether.c"
 
 static u8 gfs_hostaddr[ETH_ALEN];
-#else
-#  if !defined CONFIG_USB_FUNCTIONFS_GENERIC
-#    define CONFIG_USB_FUNCTIONFS_GENERIC
+#  ifdef CONFIG_USB_FUNCTIONFS_ETH
+static int eth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]);
 #  endif
+#else
 #  define gether_cleanup() do { } while (0)
 #  define gether_setup(gadget, hostaddr)   ((int)0)
+#  define gfs_hostaddr NULL
 #endif
 
 #include "f_fs.c"
@@ -107,15 +108,7 @@ static const struct usb_descriptor_header *gfs_otg_desc[] = {
 enum {
 	GFS_STRING_MANUFACTURER_IDX,
 	GFS_STRING_PRODUCT_IDX,
-#ifdef CONFIG_USB_FUNCTIONFS_RNDIS
-	GFS_STRING_RNDIS_CONFIG_IDX,
-#endif
-#ifdef CONFIG_USB_FUNCTIONFS_ETH
-	GFS_STRING_ECM_CONFIG_IDX,
-#endif
-#ifdef CONFIG_USB_FUNCTIONFS_GENERIC
-	GFS_STRING_GENERIC_CONFIG_IDX,
-#endif
+	GFS_STRING_FIRST_CONFIG_IDX,
 };
 
 static       char gfs_manufacturer[50];
@@ -126,13 +119,13 @@ static struct usb_string gfs_strings[] = {
 	[GFS_STRING_MANUFACTURER_IDX].s = gfs_manufacturer,
 	[GFS_STRING_PRODUCT_IDX].s = gfs_driver_desc,
 #ifdef CONFIG_USB_FUNCTIONFS_RNDIS
-	[GFS_STRING_RNDIS_CONFIG_IDX].s = "FunctionFS + RNDIS",
+	{ .s = "FunctionFS + RNDIS" },
 #endif
 #ifdef CONFIG_USB_FUNCTIONFS_ETH
-	[GFS_STRING_ECM_CONFIG_IDX].s = "FunctionFS + ECM",
+	{ .s = "FunctionFS + ECM" },
 #endif
 #ifdef CONFIG_USB_FUNCTIONFS_GENERIC
-	[GFS_STRING_GENERIC_CONFIG_IDX].s = "FunctionFS",
+	{ .s = "FunctionFS" },
 #endif
 	{  } /* end of list */
 };
@@ -146,59 +139,33 @@ static struct usb_gadget_strings *gfs_dev_strings[] = {
 };
 
 
+
+struct gfs_configuration {
+	struct usb_configuration c;
+	int (*eth)(struct usb_configuration *c, u8 *ethaddr);
+} gfs_configurations[] = {
 #ifdef CONFIG_USB_FUNCTIONFS_RNDIS
-static int gfs_do_rndis_config(struct usb_configuration *c);
-
-static struct usb_configuration gfs_rndis_config_driver = {
-	.label			= "FunctionFS + RNDIS",
-	.bind			= gfs_do_rndis_config,
-	.bConfigurationValue	= 1,
-	/* .iConfiguration	= DYNAMIC */
-	.bmAttributes		= USB_CONFIG_ATT_SELFPOWER,
-};
-#  define gfs_add_rndis_config(cdev) \
-	usb_add_config(cdev, &gfs_rndis_config_driver)
-#else
-#  define gfs_add_rndis_config(cdev) 0
+	{
+		.eth		= rndis_bind_config,
+	},
 #endif
 
-
 #ifdef CONFIG_USB_FUNCTIONFS_ETH
-static int gfs_do_ecm_config(struct usb_configuration *c);
-
-static struct usb_configuration gfs_ecm_config_driver = {
-	.label			= "FunctionFS + ECM",
-	.bind			= gfs_do_ecm_config,
-	.bConfigurationValue	= 1,
-	/* .iConfiguration	= DYNAMIC */
-	.bmAttributes		= USB_CONFIG_ATT_SELFPOWER,
-};
-#  define gfs_add_ecm_config(cdev) \
-	usb_add_config(cdev, &gfs_ecm_config_driver)
-#else
-#  define gfs_add_ecm_config(cdev) 0
+	{
+		.eth		= eth_bind_config,
+	},
 #endif
 
-
 #ifdef CONFIG_USB_FUNCTIONFS_GENERIC
-static int gfs_do_generic_config(struct usb_configuration *c);
-
-static struct usb_configuration gfs_generic_config_driver = {
-	.label			= "FunctionFS",
-	.bind			= gfs_do_generic_config,
-	.bConfigurationValue	= 2,
-	/* .iConfiguration	= DYNAMIC */
-	.bmAttributes		= USB_CONFIG_ATT_SELFPOWER,
-};
-#  define gfs_add_generic_config(cdev) \
-	usb_add_config(cdev, &gfs_generic_config_driver)
-#else
-#  define gfs_add_generic_config(cdev) 0
+	{
+	},
 #endif
+};
 
 
 static int gfs_bind(struct usb_composite_dev *cdev);
 static int gfs_unbind(struct usb_composite_dev *cdev);
+static int gfs_do_config(struct usb_configuration *c);
 
 static struct usb_composite_driver gfs_driver = {
 	.name		= gfs_short_name,
@@ -267,7 +234,7 @@ static int functionfs_check_dev_callback(const char *dev_name)
 
 static int gfs_bind(struct usb_composite_dev *cdev)
 {
-	int ret;
+	int ret, i;
 
 	ENTER();
 
@@ -284,57 +251,32 @@ static int gfs_bind(struct usb_composite_dev *cdev)
 	snprintf(gfs_manufacturer, sizeof gfs_manufacturer, "%s %s with %s",
 		 init_utsname()->sysname, init_utsname()->release,
 		 cdev->gadget->name);
-	ret = usb_string_id(cdev);
-	if (unlikely(ret < 0))
-		goto error;
-	gfs_strings[GFS_STRING_MANUFACTURER_IDX].id = ret;
-	gfs_dev_desc.iManufacturer = ret;
-
-	ret = usb_string_id(cdev);
-	if (unlikely(ret < 0))
-		goto error;
-	gfs_strings[GFS_STRING_PRODUCT_IDX].id = ret;
-	gfs_dev_desc.iProduct = ret;
-
-#ifdef CONFIG_USB_FUNCTIONFS_RNDIS
-	ret = usb_string_id(cdev);
-	if (unlikely(ret < 0))
-		goto error;
-	gfs_strings[GFS_STRING_RNDIS_CONFIG_IDX].id = ret;
-	gfs_rndis_config_driver.iConfiguration = ret;
-#endif
 
-#ifdef CONFIG_USB_FUNCTIONFS_ETH
-	ret = usb_string_id(cdev);
+	ret = usb_string_ids_tab(cdev, gfs_strings);
 	if (unlikely(ret < 0))
 		goto error;
-	gfs_strings[GFS_STRING_ECM_CONFIG_IDX].id = ret;
-	gfs_ecm_config_driver.iConfiguration = ret;
-#endif
 
-#ifdef CONFIG_USB_FUNCTIONFS_GENERIC
-	ret = usb_string_id(cdev);
-	if (unlikely(ret < 0))
-		goto error;
-	gfs_strings[GFS_STRING_GENERIC_CONFIG_IDX].id = ret;
-	gfs_generic_config_driver.iConfiguration = ret;
-#endif
+	gfs_dev_desc.iManufacturer = gfs_strings[GFS_STRING_MANUFACTURER_IDX].id;
+	gfs_dev_desc.iProduct      = gfs_strings[GFS_STRING_PRODUCT_IDX].id;
 
 	ret = functionfs_bind(gfs_ffs_data, cdev);
 	if (unlikely(ret < 0))
 		goto error;
 
-	ret = gfs_add_rndis_config(cdev);
-	if (unlikely(ret < 0))
-		goto error_unbind;
+	for (i = 0; i < ARRAY_SIZE(gfs_configurations); ++i) {
+		struct gfs_configuration *c = gfs_configurations + i;
 
-	ret = gfs_add_ecm_config(cdev);
-	if (unlikely(ret < 0))
-		goto error_unbind;
+		ret = GFS_STRING_FIRST_CONFIG_IDX + i;
+		c->c.label			= gfs_strings[ret].s;
+		c->c.iConfiguration		= gfs_strings[ret].id;
+		c->c.bind			= gfs_do_config;
+		c->c.bConfigurationValue	= 1 + i;
+		c->c.bmAttributes		= USB_CONFIG_ATT_SELFPOWER;
 
-	ret = gfs_add_generic_config(cdev);
-	if (unlikely(ret < 0))
-		goto error_unbind;
+		ret = usb_add_config(cdev, &c->c);
+		if (unlikely(ret < 0))
+			goto error_unbind;
+	}
 
 	return 0;
 
@@ -368,10 +310,10 @@ static int gfs_unbind(struct usb_composite_dev *cdev)
 }
 
 
-static int __gfs_do_config(struct usb_configuration *c,
-			   int (*eth)(struct usb_configuration *c, u8 *ethaddr),
-			   u8 *ethaddr)
+static int gfs_do_config(struct usb_configuration *c)
 {
+	struct gfs_configuration *gc =
+		container_of(c, struct gfs_configuration, c);
 	int ret;
 
 	if (WARN_ON(!gfs_ffs_data))
@@ -382,13 +324,13 @@ static int __gfs_do_config(struct usb_configuration *c,
 		c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
 	}
 
-	if (eth) {
-		ret = eth(c, ethaddr);
+	if (gc->eth) {
+		ret = gc->eth(c, gfs_hostaddr);
 		if (unlikely(ret < 0))
 			return ret;
 	}
 
-	ret = functionfs_add(c->cdev, c, gfs_ffs_data);
+	ret = functionfs_bind_config(c->cdev, c, gfs_ffs_data);
 	if (unlikely(ret < 0))
 		return ret;
 
@@ -406,32 +348,12 @@ static int __gfs_do_config(struct usb_configuration *c,
 	return 0;
 }
 
-#ifdef CONFIG_USB_FUNCTIONFS_RNDIS
-static int gfs_do_rndis_config(struct usb_configuration *c)
-{
-	ENTER();
-
-	return __gfs_do_config(c, rndis_bind_config, gfs_hostaddr);
-}
-#endif
 
 #ifdef CONFIG_USB_FUNCTIONFS_ETH
-static int gfs_do_ecm_config(struct usb_configuration *c)
-{
-	ENTER();
-
-	return __gfs_do_config(c,
-			       can_support_ecm(c->cdev->gadget)
-			     ? ecm_bind_config : geth_bind_config,
-			       gfs_hostaddr);
-}
-#endif
-
-#ifdef CONFIG_USB_FUNCTIONFS_GENERIC
-static int gfs_do_generic_config(struct usb_configuration *c)
+static int eth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN])
 {
-	ENTER();
-
-	return __gfs_do_config(c, NULL, NULL);
+	return can_support_ecm(c->cdev->gadget)
+		? ecm_bind_config(c, ethaddr)
+		: geth_bind_config(c, ethaddr);
 }
 #endif
diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c
index b7bf880..1b413a5 100644
--- a/drivers/usb/gadget/gmidi.c
+++ b/drivers/usb/gadget/gmidi.c
@@ -1157,7 +1157,7 @@ fail:
 /*
  * Creates an output endpoint, and initializes output ports.
  */
-static int __init gmidi_bind(struct usb_gadget *gadget)
+static int __ref gmidi_bind(struct usb_gadget *gadget)
 {
 	struct gmidi_device *dev;
 	struct usb_ep *in_ep, *out_ep;
diff --git a/drivers/usb/gadget/hid.c b/drivers/usb/gadget/hid.c
index 7757226..735495b 100644
--- a/drivers/usb/gadget/hid.c
+++ b/drivers/usb/gadget/hid.c
@@ -127,7 +127,7 @@ static struct usb_gadget_strings *dev_strings[] = {
 
 /****************************** Configurations ******************************/
 
-static int __init do_config(struct usb_configuration *c)
+static int __ref do_config(struct usb_configuration *c)
 {
 	struct hidg_func_node *e;
 	int func = 0, status = 0;
@@ -156,7 +156,7 @@ static struct usb_configuration config_driver = {
 
 /****************************** Gadget Bind ******************************/
 
-static int __init hid_bind(struct usb_composite_dev *cdev)
+static int __ref hid_bind(struct usb_composite_dev *cdev)
 {
 	struct usb_gadget *gadget = cdev->gadget;
 	struct list_head *tmp;
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index de8a838..fc35406 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -1299,11 +1299,9 @@ static long dev_ioctl (struct file *fd, unsigned code, unsigned long value)
 	struct usb_gadget	*gadget = dev->gadget;
 	long ret = -ENOTTY;
 
-	if (gadget->ops->ioctl) {
-		lock_kernel();
+	if (gadget->ops->ioctl)
 		ret = gadget->ops->ioctl (gadget, code, value);
-		unlock_kernel();
-	}
+
 	return ret;
 }
 
@@ -1867,13 +1865,9 @@ dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
 	buf += 4;
 	length -= 4;
 
-	kbuf = kmalloc (length, GFP_KERNEL);
-	if (!kbuf)
-		return -ENOMEM;
-	if (copy_from_user (kbuf, buf, length)) {
-		kfree (kbuf);
-		return -EFAULT;
-	}
+	kbuf = memdup_user(buf, length);
+	if (IS_ERR(kbuf))
+		return PTR_ERR(kbuf);
 
 	spin_lock_irq (&dev->lock);
 	value = -EINVAL;
diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c
index f1a0702..d41b69c 100644
--- a/drivers/usb/gadget/langwell_udc.c
+++ b/drivers/usb/gadget/langwell_udc.c
@@ -841,9 +841,9 @@ static int langwell_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
 		VDBG(dev, "req->mapped = 0\n");
 	}
 
-	DBG(dev, "%s queue req %p, len %u, buf %p, dma 0x%08x\n",
-			_ep->name,
-			_req, _req->length, _req->buf, _req->dma);
+	DBG(dev, "%s queue req %p, len %u, buf %p, dma 0x%08llx\n",
+	    _ep->name,
+	    _req, _req->length, _req->buf, (unsigned long long)_req->dma);
 
 	_req->status = -EINPROGRESS;
 	_req->actual = 0;
diff --git a/drivers/usb/gadget/mass_storage.c b/drivers/usb/gadget/mass_storage.c
index 705cc1f..585f255 100644
--- a/drivers/usb/gadget/mass_storage.c
+++ b/drivers/usb/gadget/mass_storage.c
@@ -141,9 +141,14 @@ static int msg_thread_exits(struct fsg_common *common)
 	return 0;
 }
 
-static int __init msg_do_config(struct usb_configuration *c)
+static int __ref msg_do_config(struct usb_configuration *c)
 {
-	struct fsg_common *common;
+	static const struct fsg_operations ops = {
+		.thread_exits = msg_thread_exits,
+	};
+	static struct fsg_common common;
+
+	struct fsg_common *retp;
 	struct fsg_config config;
 	int ret;
 
@@ -153,13 +158,14 @@ static int __init msg_do_config(struct usb_configuration *c)
 	}
 
 	fsg_config_from_params(&config, &mod_data);
-	config.thread_exits = msg_thread_exits;
-	common = fsg_common_init(0, c->cdev, &config);
-	if (IS_ERR(common))
-		return PTR_ERR(common);
+	config.ops = &ops;
+
+	retp = fsg_common_init(&common, c->cdev, &config);
+	if (IS_ERR(retp))
+		return PTR_ERR(retp);
 
-	ret = fsg_add(c->cdev, c, common);
-	fsg_common_put(common);
+	ret = fsg_bind_config(c->cdev, c, &common);
+	fsg_common_put(&common);
 	return ret;
 }
 
@@ -176,7 +182,7 @@ static struct usb_configuration msg_config_driver = {
 /****************************** Gadget Bind ******************************/
 
 
-static int __init msg_bind(struct usb_composite_dev *cdev)
+static int __ref msg_bind(struct usb_composite_dev *cdev)
 {
 	struct usb_gadget *gadget = cdev->gadget;
 	int status;
diff --git a/drivers/usb/gadget/multi.c b/drivers/usb/gadget/multi.c
index a930d7f..795d762 100644
--- a/drivers/usb/gadget/multi.c
+++ b/drivers/usb/gadget/multi.c
@@ -24,6 +24,7 @@
 
 #include <linux/kernel.h>
 #include <linux/utsname.h>
+#include <linux/module.h>
 
 
 #if defined USB_ETH_RNDIS
@@ -35,14 +36,13 @@
 
 
 #define DRIVER_DESC		"Multifunction Composite Gadget"
-#define DRIVER_VERSION		"2009/07/21"
 
-/*-------------------------------------------------------------------------*/
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Michal Nazarewicz");
+MODULE_LICENSE("GPL");
 
-#define MULTI_VENDOR_NUM	0x0525	/* XXX NetChip */
-#define MULTI_PRODUCT_NUM	0xa4ab	/* XXX */
 
-/*-------------------------------------------------------------------------*/
+/***************************** All the files... *****************************/
 
 /*
  * kbuild is not very cooperative with respect to linking separately
@@ -57,6 +57,8 @@
 #include "config.c"
 #include "epautoconf.c"
 
+#include "f_mass_storage.c"
+
 #include "u_serial.c"
 #include "f_acm.c"
 
@@ -68,13 +70,24 @@
 #endif
 #include "u_ether.c"
 
-#undef DBG     /* u_ether.c has broken idea about macros */
-#undef VDBG    /* so clean up after it */
-#undef ERROR
-#undef INFO
-#include "f_mass_storage.c"
 
-/*-------------------------------------------------------------------------*/
+
+/***************************** Device Descriptor ****************************/
+
+#define MULTI_VENDOR_NUM	0x0525	/* XXX NetChip */
+#define MULTI_PRODUCT_NUM	0xa4ab	/* XXX */
+
+
+enum {
+	__MULTI_NO_CONFIG,
+#ifdef CONFIG_USB_G_MULTI_RNDIS
+	MULTI_RNDIS_CONFIG_NUM,
+#endif
+#ifdef CONFIG_USB_G_MULTI_CDC
+	MULTI_CDC_CONFIG_NUM,
+#endif
+};
+
 
 static struct usb_device_descriptor device_desc = {
 	.bLength =		sizeof device_desc,
@@ -82,80 +95,82 @@ static struct usb_device_descriptor device_desc = {
 
 	.bcdUSB =		cpu_to_le16(0x0200),
 
-	/* .bDeviceClass =		USB_CLASS_COMM, */
-	/* .bDeviceSubClass =	0, */
-	/* .bDeviceProtocol =	0, */
-	.bDeviceClass =		0xEF,
+	.bDeviceClass =		USB_CLASS_MISC /* 0xEF */,
 	.bDeviceSubClass =	2,
 	.bDeviceProtocol =	1,
-	/* .bMaxPacketSize0 = f(hardware) */
 
 	/* Vendor and product id can be overridden by module parameters.  */
 	.idVendor =		cpu_to_le16(MULTI_VENDOR_NUM),
 	.idProduct =		cpu_to_le16(MULTI_PRODUCT_NUM),
-	/* .bcdDevice = f(hardware) */
-	/* .iManufacturer = DYNAMIC */
-	/* .iProduct = DYNAMIC */
-	/* NO SERIAL NUMBER */
-	.bNumConfigurations =	1,
 };
 
-static struct usb_otg_descriptor otg_descriptor = {
-	.bLength =		sizeof otg_descriptor,
-	.bDescriptorType =	USB_DT_OTG,
-
-	/* REVISIT SRP-only hardware is possible, although
-	 * it would not be called "OTG" ...
-	 */
-	.bmAttributes =		USB_OTG_SRP | USB_OTG_HNP,
-};
 
 static const struct usb_descriptor_header *otg_desc[] = {
-	(struct usb_descriptor_header *) &otg_descriptor,
+	(struct usb_descriptor_header *) &(struct usb_otg_descriptor){
+		.bLength =		sizeof(struct usb_otg_descriptor),
+		.bDescriptorType =	USB_DT_OTG,
+
+		/*
+		 * REVISIT SRP-only hardware is possible, although
+		 * it would not be called "OTG" ...
+		 */
+		.bmAttributes =		USB_OTG_SRP | USB_OTG_HNP,
+	},
 	NULL,
 };
 
 
-/* string IDs are assigned dynamically */
-
-#define STRING_MANUFACTURER_IDX		0
-#define STRING_PRODUCT_IDX		1
+enum {
+	MULTI_STRING_MANUFACTURER_IDX,
+	MULTI_STRING_PRODUCT_IDX,
+#ifdef CONFIG_USB_G_MULTI_RNDIS
+	MULTI_STRING_RNDIS_CONFIG_IDX,
+#endif
+#ifdef CONFIG_USB_G_MULTI_CDC
+	MULTI_STRING_CDC_CONFIG_IDX,
+#endif
+};
 
 static char manufacturer[50];
 
 static struct usb_string strings_dev[] = {
-	[STRING_MANUFACTURER_IDX].s = manufacturer,
-	[STRING_PRODUCT_IDX].s = DRIVER_DESC,
+	[MULTI_STRING_MANUFACTURER_IDX].s = manufacturer,
+	[MULTI_STRING_PRODUCT_IDX].s      = DRIVER_DESC,
+#ifdef CONFIG_USB_G_MULTI_RNDIS
+	[MULTI_STRING_RNDIS_CONFIG_IDX].s = "Multifunction with RNDIS",
+#endif
+#ifdef CONFIG_USB_G_MULTI_CDC
+	[MULTI_STRING_CDC_CONFIG_IDX].s   = "Multifunction with CDC ECM",
+#endif
 	{  } /* end of list */
 };
 
-static struct usb_gadget_strings stringtab_dev = {
-	.language	= 0x0409,	/* en-us */
-	.strings	= strings_dev,
-};
-
 static struct usb_gadget_strings *dev_strings[] = {
-	&stringtab_dev,
+	&(struct usb_gadget_strings){
+		.language	= 0x0409,	/* en-us */
+		.strings	= strings_dev,
+	},
 	NULL,
 };
 
-static u8 hostaddr[ETH_ALEN];
 
 
 
 /****************************** Configurations ******************************/
 
-static struct fsg_module_parameters mod_data = {
-	.stall = 1
-};
-FSG_MODULE_PARAMETERS(/* no prefix */, mod_data);
+static struct fsg_module_parameters fsg_mod_data = { .stall = 1 };
+FSG_MODULE_PARAMETERS(/* no prefix */, fsg_mod_data);
+
+static struct fsg_common fsg_common;
+
+static u8 hostaddr[ETH_ALEN];
 
-static struct fsg_common *fsg_common;
 
+/********** RNDIS **********/
 
 #ifdef USB_ETH_RNDIS
 
-static int __init rndis_do_config(struct usb_configuration *c)
+static __ref int rndis_do_config(struct usb_configuration *c)
 {
 	int ret;
 
@@ -172,26 +187,42 @@ static int __init rndis_do_config(struct usb_configuration *c)
 	if (ret < 0)
 		return ret;
 
-	ret = fsg_add(c->cdev, c, fsg_common);
+	ret = fsg_bind_config(c->cdev, c, &fsg_common);
 	if (ret < 0)
 		return ret;
 
 	return 0;
 }
 
-static struct usb_configuration rndis_config_driver = {
-	.label			= "Multifunction Composite (RNDIS + MS + ACM)",
-	.bind			= rndis_do_config,
-	.bConfigurationValue	= 2,
-	/* .iConfiguration = DYNAMIC */
-	.bmAttributes		= USB_CONFIG_ATT_SELFPOWER,
-};
+static int rndis_config_register(struct usb_composite_dev *cdev)
+{
+	static struct usb_configuration config = {
+		.bind			= rndis_do_config,
+		.bConfigurationValue	= MULTI_RNDIS_CONFIG_NUM,
+		.bmAttributes		= USB_CONFIG_ATT_SELFPOWER,
+	};
+
+	config.label          = strings_dev[MULTI_STRING_RNDIS_CONFIG_IDX].s;
+	config.iConfiguration = strings_dev[MULTI_STRING_RNDIS_CONFIG_IDX].id;
+
+	return usb_add_config(cdev, &config);
+}
+
+#else
+
+static int rndis_config_register(struct usb_composite_dev *cdev)
+{
+	return 0;
+}
 
 #endif
 
+
+/********** CDC ECM **********/
+
 #ifdef CONFIG_USB_G_MULTI_CDC
 
-static int __init cdc_do_config(struct usb_configuration *c)
+static __ref int cdc_do_config(struct usb_configuration *c)
 {
 	int ret;
 
@@ -208,20 +239,33 @@ static int __init cdc_do_config(struct usb_configuration *c)
 	if (ret < 0)
 		return ret;
 
-	ret = fsg_add(c->cdev, c, fsg_common);
+	ret = fsg_bind_config(c->cdev, c, &fsg_common);
 	if (ret < 0)
 		return ret;
 
 	return 0;
 }
 
-static struct usb_configuration cdc_config_driver = {
-	.label			= "Multifunction Composite (CDC + MS + ACM)",
-	.bind			= cdc_do_config,
-	.bConfigurationValue	= 1,
-	/* .iConfiguration = DYNAMIC */
-	.bmAttributes		= USB_CONFIG_ATT_SELFPOWER,
-};
+static int cdc_config_register(struct usb_composite_dev *cdev)
+{
+	static struct usb_configuration config = {
+		.bind			= cdc_do_config,
+		.bConfigurationValue	= MULTI_CDC_CONFIG_NUM,
+		.bmAttributes		= USB_CONFIG_ATT_SELFPOWER,
+	};
+
+	config.label          = strings_dev[MULTI_STRING_CDC_CONFIG_IDX].s;
+	config.iConfiguration = strings_dev[MULTI_STRING_CDC_CONFIG_IDX].id;
+
+	return usb_add_config(cdev, &config);
+}
+
+#else
+
+static int cdc_config_register(struct usb_composite_dev *cdev)
+{
+	return 0;
+}
 
 #endif
 
@@ -230,7 +274,7 @@ static struct usb_configuration cdc_config_driver = {
 /****************************** Gadget Bind ******************************/
 
 
-static int __init multi_bind(struct usb_composite_dev *cdev)
+static int __ref multi_bind(struct usb_composite_dev *cdev)
 {
 	struct usb_gadget *gadget = cdev->gadget;
 	int status, gcnum;
@@ -252,67 +296,56 @@ static int __init multi_bind(struct usb_composite_dev *cdev)
 		goto fail0;
 
 	/* set up mass storage function */
-	fsg_common = fsg_common_from_params(0, cdev, &mod_data);
-	if (IS_ERR(fsg_common)) {
-		status = PTR_ERR(fsg_common);
-		goto fail1;
+	{
+		void *retp;
+		retp = fsg_common_from_params(&fsg_common, cdev, &fsg_mod_data);
+		if (IS_ERR(retp)) {
+			status = PTR_ERR(retp);
+			goto fail1;
+		}
 	}
 
-
+	/* set bcdDevice */
 	gcnum = usb_gadget_controller_number(gadget);
-	if (gcnum >= 0)
+	if (gcnum >= 0) {
 		device_desc.bcdDevice = cpu_to_le16(0x0300 | gcnum);
-	else {
-		/* We assume that can_support_ecm() tells the truth;
-		 * but if the controller isn't recognized at all then
-		 * that assumption is a bit more likely to be wrong.
-		 */
-		WARNING(cdev, "controller '%s' not recognized\n",
-		        gadget->name);
+	} else {
+		WARNING(cdev, "controller '%s' not recognized\n", gadget->name);
 		device_desc.bcdDevice = cpu_to_le16(0x0300 | 0x0099);
 	}
 
-
-	/* Allocate string descriptor numbers ... note that string
-	 * contents can be overridden by the composite_dev glue.
-	 */
-
-	/* device descriptor strings: manufacturer, product */
+	/* allocate string descriptor numbers */
 	snprintf(manufacturer, sizeof manufacturer, "%s %s with %s",
 	         init_utsname()->sysname, init_utsname()->release,
 	         gadget->name);
-	status = usb_string_id(cdev);
-	if (status < 0)
-		goto fail2;
-	strings_dev[STRING_MANUFACTURER_IDX].id = status;
-	device_desc.iManufacturer = status;
 
-	status = usb_string_id(cdev);
-	if (status < 0)
+	status = usb_string_ids_tab(cdev, strings_dev);
+	if (unlikely(status < 0))
 		goto fail2;
-	strings_dev[STRING_PRODUCT_IDX].id = status;
-	device_desc.iProduct = status;
 
-#ifdef USB_ETH_RNDIS
-	/* register our first configuration */
-	status = usb_add_config(cdev, &rndis_config_driver);
-	if (status < 0)
+	device_desc.iManufacturer =
+		strings_dev[MULTI_STRING_MANUFACTURER_IDX].id;
+	device_desc.iProduct      =
+		strings_dev[MULTI_STRING_PRODUCT_IDX].id;
+
+	/* register configurations */
+	status = rndis_config_register(cdev);
+	if (unlikely(status < 0))
 		goto fail2;
-#endif
 
-#ifdef CONFIG_USB_G_MULTI_CDC
-	/* register our second configuration */
-	status = usb_add_config(cdev, &cdc_config_driver);
-	if (status < 0)
+	status = cdc_config_register(cdev);
+	if (unlikely(status < 0))
 		goto fail2;
-#endif
 
-	dev_info(&gadget->dev, DRIVER_DESC ", version: " DRIVER_VERSION "\n");
-	fsg_common_put(fsg_common);
+	/* we're done */
+	dev_info(&gadget->dev, DRIVER_DESC "\n");
+	fsg_common_put(&fsg_common);
 	return 0;
 
+
+	/* error recovery */
 fail2:
-	fsg_common_put(fsg_common);
+	fsg_common_put(&fsg_common);
 fail1:
 	gserial_cleanup();
 fail0:
@@ -339,18 +372,15 @@ static struct usb_composite_driver multi_driver = {
 	.unbind		= __exit_p(multi_unbind),
 };
 
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_AUTHOR("Michal Nazarewicz");
-MODULE_LICENSE("GPL");
 
-static int __init g_multi_init(void)
+static int __init multi_init(void)
 {
 	return usb_composite_register(&multi_driver);
 }
-module_init(g_multi_init);
+module_init(multi_init);
 
-static void __exit g_multi_cleanup(void)
+static void __exit multi_exit(void)
 {
 	usb_composite_unregister(&multi_driver);
 }
-module_exit(g_multi_cleanup);
+module_exit(multi_exit);
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index 4c3ac5c..cf241c3 100644
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -25,7 +25,7 @@
 #include <linux/ioport.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
+#include <linux/mutex.h>
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/timer.h>
@@ -70,6 +70,7 @@
 #define DRIVER_DESC		"Printer Gadget"
 #define DRIVER_VERSION		"2007 OCT 06"
 
+static DEFINE_MUTEX(printer_mutex);
 static const char shortname [] = "printer";
 static const char driver_desc [] = DRIVER_DESC;
 
@@ -476,7 +477,7 @@ printer_open(struct inode *inode, struct file *fd)
 	unsigned long		flags;
 	int			ret = -EBUSY;
 
-	lock_kernel();
+	mutex_lock(&printer_mutex);
 	dev = container_of(inode->i_cdev, struct printer_dev, printer_cdev);
 
 	spin_lock_irqsave(&dev->lock, flags);
@@ -492,7 +493,7 @@ printer_open(struct inode *inode, struct file *fd)
 	spin_unlock_irqrestore(&dev->lock, flags);
 
 	DBG(dev, "printer_open returned %x\n", ret);
-	unlock_kernel();
+	mutex_unlock(&printer_mutex);
 	return ret;
 }
 
@@ -1346,7 +1347,7 @@ printer_unbind(struct usb_gadget *gadget)
 	set_gadget_data(gadget, NULL);
 }
 
-static int __init
+static int __ref
 printer_bind(struct usb_gadget *gadget)
 {
 	struct printer_dev	*dev;
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 26193ec..521ebed 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -12,6 +12,8 @@
  * published by the Free Software Foundation.
 */
 
+#define DEBUG
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/spinlock.h>
@@ -23,6 +25,7 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/slab.h>
+#include <linux/clk.h>
 
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
@@ -33,6 +36,7 @@
 #include <plat/regs-usb-hsotg.h>
 #include <mach/regs-sys.h>
 #include <plat/udc-hs.h>
+#include <plat/cpu.h>
 
 #define DMA_ADDR_INVALID (~((dma_addr_t)0))
 
@@ -91,7 +95,9 @@ struct s3c_hsotg_req;
  * For periodic IN endpoints, we have fifo_size and fifo_load to try
  * and keep track of the amount of data in the periodic FIFO for each
  * of these as we don't have a status register that tells us how much
- * is in each of them.
+ * is in each of them. (note, this may actually be useless information
+ * as in shared-fifo mode periodic in acts like a single-frame packet
+ * buffer than a fifo)
  */
 struct s3c_hsotg_ep {
 	struct usb_ep		ep;
@@ -128,6 +134,7 @@ struct s3c_hsotg_ep {
  * @regs: The memory area mapped for accessing registers.
  * @regs_res: The resource that was allocated when claiming register space.
  * @irq: The IRQ number we are using
+ * @dedicated_fifos: Set if the hardware has dedicated IN-EP fifos.
  * @debug_root: root directrory for debugfs.
  * @debug_file: main status file for debugfs.
  * @debug_fifo: FIFO status file for debugfs.
@@ -145,6 +152,9 @@ struct s3c_hsotg {
 	void __iomem		*regs;
 	struct resource		*regs_res;
 	int			irq;
+	struct clk		*clk;
+
+	unsigned int		dedicated_fifos:1;
 
 	struct dentry		*debug_root;
 	struct dentry		*debug_file;
@@ -310,11 +320,11 @@ static void s3c_hsotg_init_fifo(struct s3c_hsotg *hsotg)
 		hsotg->regs + S3C_GNPTXFSIZ);
 	*/
 
-	/* set FIFO sizes to 2048/0x1C0 */
+	/* set FIFO sizes to 2048/1024 */
 
 	writel(2048, hsotg->regs + S3C_GRXFSIZ);
 	writel(S3C_GNPTXFSIZ_NPTxFStAddr(2048) |
-	       S3C_GNPTXFSIZ_NPTxFDep(0x1C0),
+	       S3C_GNPTXFSIZ_NPTxFDep(1024),
 	       hsotg->regs + S3C_GNPTXFSIZ);
 
 	/* arange all the rest of the TX FIFOs, as some versions of this
@@ -464,7 +474,7 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg,
 	if (to_write == 0)
 		return 0;
 
-	if (periodic) {
+	if (periodic && !hsotg->dedicated_fifos) {
 		u32 epsize = readl(hsotg->regs + S3C_DIEPTSIZ(hs_ep->index));
 		int size_left;
 		int size_done;
@@ -474,6 +484,14 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg,
 
 		size_left = S3C_DxEPTSIZ_XferSize_GET(epsize);
 
+		/* if shared fifo, we cannot write anything until the
+		 * previous data has been completely sent.
+		 */
+		if (hs_ep->fifo_load != 0) {
+			s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_PTxFEmp);
+			return -ENOSPC;
+		}
+
 		dev_dbg(hsotg->dev, "%s: left=%d, load=%d, fifo=%d, size %d\n",
 			__func__, size_left,
 			hs_ep->size_loaded, hs_ep->fifo_load, hs_ep->fifo_size);
@@ -494,6 +512,11 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg,
 			s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_PTxFEmp);
 			return -ENOSPC;
 		}
+	} else if (hsotg->dedicated_fifos && hs_ep->index != 0) {
+		can_write = readl(hsotg->regs + S3C_DTXFSTS(hs_ep->index));
+
+		can_write &= 0xffff;
+		can_write *= 4;
 	} else {
 		if (S3C_GNPTXSTS_NPTxQSpcAvail_GET(gnptxsts) == 0) {
 			dev_dbg(hsotg->dev,
@@ -505,6 +528,7 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg,
 		}
 
 		can_write = S3C_GNPTXSTS_NPTxFSpcAvail_GET(gnptxsts);
+		can_write *= 4;	/* fifo size is in 32bit quantities. */
 	}
 
 	dev_dbg(hsotg->dev, "%s: GNPTXSTS=%08x, can=%d, to=%d, mps %d\n",
@@ -517,6 +541,17 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg,
 	if (can_write > 512)
 		can_write = 512;
 
+	/* limit the write to one max-packet size worth of data, but allow
+	 * the transfer to return that it did not run out of fifo space
+	 * doing it. */
+	if (to_write > hs_ep->ep.maxpacket) {
+		to_write = hs_ep->ep.maxpacket;
+
+		s3c_hsotg_en_gsint(hsotg,
+				   periodic ? S3C_GINTSTS_PTxFEmp :
+				   S3C_GINTSTS_NPTxFEmp);
+	}
+
 	/* see if we can write data */
 
 	if (to_write > can_write) {
@@ -579,12 +614,10 @@ static unsigned get_ep_limit(struct s3c_hsotg_ep *hs_ep)
 		maxsize = S3C_DxEPTSIZ_XferSize_LIMIT + 1;
 		maxpkt = S3C_DxEPTSIZ_PktCnt_LIMIT + 1;
 	} else {
+		maxsize = 64+64;
 		if (hs_ep->dir_in) {
-			/* maxsize = S3C_DIEPTSIZ0_XferSize_LIMIT + 1; */
-			maxsize = 64+64+1;
 			maxpkt = S3C_DIEPTSIZ0_PktCnt_LIMIT + 1;
 		} else {
-			maxsize = 0x3f;
 			maxpkt = 2;
 		}
 	}
@@ -1353,6 +1386,9 @@ static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size)
 	read_ptr = hs_req->req.actual;
 	max_req = hs_req->req.length - read_ptr;
 
+	dev_dbg(hsotg->dev, "%s: read %d/%d, done %d/%d\n",
+		__func__, to_read, max_req, read_ptr, hs_req->req.length);
+
 	if (to_read > max_req) {
 		/* more data appeared than we where willing
 		 * to deal with in this request.
@@ -1362,9 +1398,6 @@ static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size)
 		WARN_ON_ONCE(1);
 	}
 
-	dev_dbg(hsotg->dev, "%s: read %d/%d, done %d/%d\n",
-		__func__, to_read, max_req, read_ptr, hs_req->req.length);
-
 	hs_ep->total_data += to_read;
 	hs_req->req.actual += to_read;
 	to_read = DIV_ROUND_UP(to_read, 4);
@@ -1433,9 +1466,11 @@ static void s3c_hsotg_send_zlp(struct s3c_hsotg *hsotg,
 static void s3c_hsotg_handle_outdone(struct s3c_hsotg *hsotg,
 				     int epnum, bool was_setup)
 {
+	u32 epsize = readl(hsotg->regs + S3C_DOEPTSIZ(epnum));
 	struct s3c_hsotg_ep *hs_ep = &hsotg->eps[epnum];
 	struct s3c_hsotg_req *hs_req = hs_ep->req;
 	struct usb_request *req = &hs_req->req;
+	unsigned size_left = S3C_DxEPTSIZ_XferSize_GET(epsize);
 	int result = 0;
 
 	if (!hs_req) {
@@ -1444,9 +1479,7 @@ static void s3c_hsotg_handle_outdone(struct s3c_hsotg *hsotg,
 	}
 
 	if (using_dma(hsotg)) {
-		u32 epsize = readl(hsotg->regs + S3C_DOEPTSIZ(epnum));
 		unsigned size_done;
-		unsigned size_left;
 
 		/* Calculate the size of the transfer by checking how much
 		 * is left in the endpoint size register and then working it
@@ -1456,14 +1489,18 @@ static void s3c_hsotg_handle_outdone(struct s3c_hsotg *hsotg,
 		 * so may overshoot/undershoot the transfer.
 		 */
 
-		size_left = S3C_DxEPTSIZ_XferSize_GET(epsize);
-
 		size_done = hs_ep->size_loaded - size_left;
 		size_done += hs_ep->last_load;
 
 		req->actual = size_done;
 	}
 
+	/* if there is more request to do, schedule new transfer */
+	if (req->actual < req->length && size_left == 0) {
+		s3c_hsotg_start_req(hsotg, hs_ep, hs_req, true);
+		return;
+	}
+
 	if (req->actual < req->length && req->short_not_ok) {
 		dev_dbg(hsotg->dev, "%s: got %d/%d (short not ok) => error\n",
 			__func__, req->actual, req->length);
@@ -1758,7 +1795,7 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx,
 		if (dir_in) {
 			s3c_hsotg_complete_in(hsotg, hs_ep);
 
-			if (idx == 0)
+			if (idx == 0 && !hs_ep->req)
 				s3c_hsotg_enqueue_setup(hsotg);
 		} else if (using_dma(hsotg)) {
 			/* We're using DMA, we need to fire an OutDone here
@@ -1818,6 +1855,15 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx,
 				 __func__, idx);
 			clear |= S3C_DIEPMSK_INTknEPMisMsk;
 		}
+
+		/* FIFO has space or is empty (see GAHBCFG) */
+		if (hsotg->dedicated_fifos &&
+		    ints & S3C_DIEPMSK_TxFIFOEmpty) {
+			dev_dbg(hsotg->dev, "%s: ep%d: TxFIFOEmpty\n",
+				__func__, idx);
+			s3c_hsotg_trytx(hsotg, hs_ep);
+			clear |= S3C_DIEPMSK_TxFIFOEmpty;
+		}
 	}
 
 	writel(clear, hsotg->regs + epint_reg);
@@ -2071,17 +2117,12 @@ irq_retry:
 		kill_all_requests(hsotg, &hsotg->eps[0], -ECONNRESET, true);
 
 		/* it seems after a reset we can end up with a situation
-		 * where the TXFIFO still has data in it... try flushing
-		 * it to remove anything that may still be in it.
+		 * where the TXFIFO still has data in it... the docs
+		 * suggest resetting all the fifos, so use the init_fifo
+		 * code to relayout and flush the fifos.
 		 */
 
-		if (1) {
-			writel(S3C_GRSTCTL_TxFNum(0) | S3C_GRSTCTL_TxFFlsh,
-			       hsotg->regs + S3C_GRSTCTL);
-
-			dev_info(hsotg->dev, "GNPTXSTS=%08x\n",
-				 readl(hsotg->regs + S3C_GNPTXSTS));
-		}
+		s3c_hsotg_init_fifo(hsotg);
 
 		s3c_hsotg_enqueue_setup(hsotg);
 
@@ -2274,6 +2315,12 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep,
 		break;
 	}
 
+	/* if the hardware has dedicated fifos, we must give each IN EP
+	 * a unique tx-fifo even if it is non-periodic.
+	 */
+	if (dir_in && hsotg->dedicated_fifos)
+		epctrl |= S3C_DxEPCTL_TxFNum(index);
+
 	/* for non control endpoints, set PID to D0 */
 	if (index)
 		epctrl |= S3C_DxEPCTL_SetD0PID;
@@ -2563,7 +2610,8 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver)
 
 	writel(S3C_DIEPMSK_TimeOUTMsk | S3C_DIEPMSK_AHBErrMsk |
 	       S3C_DIEPMSK_INTknEPMisMsk |
-	       S3C_DIEPMSK_EPDisbldMsk | S3C_DIEPMSK_XferComplMsk,
+	       S3C_DIEPMSK_EPDisbldMsk | S3C_DIEPMSK_XferComplMsk |
+	       ((hsotg->dedicated_fifos) ? S3C_DIEPMSK_TxFIFOEmpty : 0),
 	       hsotg->regs + S3C_DIEPMSK);
 
 	/* don't need XferCompl, we get that from RXFIFO in slave mode. In
@@ -2732,7 +2780,7 @@ static void __devinit s3c_hsotg_initep(struct s3c_hsotg *hsotg,
 	 */
 
 	ptxfifo = readl(hsotg->regs + S3C_DPTXFSIZn(epnum));
-	hs_ep->fifo_size = S3C_DPTXFSIZn_DPTxFSize_GET(ptxfifo);
+	hs_ep->fifo_size = S3C_DPTXFSIZn_DPTxFSize_GET(ptxfifo) * 4;
 
 	/* if we're using dma, we need to set the next-endpoint pointer
 	 * to be something valid.
@@ -2753,13 +2801,33 @@ static void __devinit s3c_hsotg_initep(struct s3c_hsotg *hsotg,
  */
 static void s3c_hsotg_otgreset(struct s3c_hsotg *hsotg)
 {
-	u32 osc;
+	struct clk *xusbxti;
+	u32 pwr, osc;
 
-	writel(0, S3C_PHYPWR);
+	pwr = readl(S3C_PHYPWR);
+	pwr &= ~0x19;
+	writel(pwr, S3C_PHYPWR);
 	mdelay(1);
 
 	osc = hsotg->plat->is_osc ? S3C_PHYCLK_EXT_OSC : 0;
 
+	xusbxti = clk_get(hsotg->dev, "xusbxti");
+	if (xusbxti && !IS_ERR(xusbxti)) {
+		switch (clk_get_rate(xusbxti)) {
+		case 12*MHZ:
+			osc |= S3C_PHYCLK_CLKSEL_12M;
+			break;
+		case 24*MHZ:
+			osc |= S3C_PHYCLK_CLKSEL_24M;
+			break;
+		default:
+		case 48*MHZ:
+			/* default reference clock */
+			break;
+		}
+		clk_put(xusbxti);
+	}
+
 	writel(osc | 0x10, S3C_PHYCLK);
 
 	/* issue a full set of resets to the otg and core */
@@ -2772,6 +2840,8 @@ static void s3c_hsotg_otgreset(struct s3c_hsotg *hsotg)
 
 static void s3c_hsotg_init(struct s3c_hsotg *hsotg)
 {
+	u32 cfg4;
+
 	/* unmask subset of endpoint interrupts */
 
 	writel(S3C_DIEPMSK_TimeOUTMsk | S3C_DIEPMSK_AHBErrMsk |
@@ -2807,6 +2877,14 @@ static void s3c_hsotg_init(struct s3c_hsotg *hsotg)
 
 	writel(using_dma(hsotg) ? S3C_GAHBCFG_DMAEn : 0x0,
 	       hsotg->regs + S3C_GAHBCFG);
+
+	/* check hardware configuration */
+
+	cfg4 = readl(hsotg->regs + 0x50);
+	hsotg->dedicated_fifos = (cfg4 >> 25) & 1;
+
+	dev_info(hsotg->dev, "%s fifos\n",
+		 hsotg->dedicated_fifos ? "dedicated" : "shared");
 }
 
 static void s3c_hsotg_dump(struct s3c_hsotg *hsotg)
@@ -3181,13 +3259,20 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev)
 	hsotg->dev = dev;
 	hsotg->plat = plat;
 
+	hsotg->clk = clk_get(&pdev->dev, "otg");
+	if (IS_ERR(hsotg->clk)) {
+		dev_err(dev, "cannot get otg clock\n");
+		ret = -EINVAL;
+		goto err_mem;
+	}
+
 	platform_set_drvdata(pdev, hsotg);
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
 		dev_err(dev, "cannot find register resource 0\n");
 		ret = -EINVAL;
-		goto err_mem;
+		goto err_clk;
 	}
 
 	hsotg->regs_res = request_mem_region(res->start, resource_size(res),
@@ -3195,7 +3280,7 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev)
 	if (!hsotg->regs_res) {
 		dev_err(dev, "cannot reserve registers\n");
 		ret = -ENOENT;
-		goto err_mem;
+		goto err_clk;
 	}
 
 	hsotg->regs = ioremap(res->start, resource_size(res));
@@ -3248,6 +3333,8 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev)
 
 	/* reset the system */
 
+	clk_enable(hsotg->clk);
+
 	s3c_hsotg_gate(pdev, true);
 
 	s3c_hsotg_otgreset(hsotg);
@@ -3271,7 +3358,8 @@ err_regs:
 err_regs_res:
 	release_resource(hsotg->regs_res);
 	kfree(hsotg->regs_res);
-
+err_clk:
+	clk_put(hsotg->clk);
 err_mem:
 	kfree(hsotg);
 	return ret;
@@ -3293,6 +3381,9 @@ static int __devexit s3c_hsotg_remove(struct platform_device *pdev)
 
 	s3c_hsotg_gate(pdev, false);
 
+	clk_disable(hsotg->clk);
+	clk_put(hsotg->clk);
+
 	kfree(hsotg);
 	return 0;
 }
diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c
index f46a609..b22eedb 100644
--- a/drivers/usb/gadget/serial.c
+++ b/drivers/usb/gadget/serial.c
@@ -137,7 +137,7 @@ MODULE_PARM_DESC(n_ports, "number of ports to create, default=1");
 
 /*-------------------------------------------------------------------------*/
 
-static int __init serial_bind_config(struct usb_configuration *c)
+static int __ref serial_bind_config(struct usb_configuration *c)
 {
 	unsigned i;
 	int status = 0;
@@ -161,7 +161,7 @@ static struct usb_configuration serial_config_driver = {
 	.bmAttributes	= USB_CONFIG_ATT_SELFPOWER,
 };
 
-static int __init gs_bind(struct usb_composite_dev *cdev)
+static int __ref gs_bind(struct usb_composite_dev *cdev)
 {
 	int			gcnum;
 	struct usb_gadget	*gadget = cdev->gadget;
diff --git a/drivers/usb/gadget/storage_common.c b/drivers/usb/gadget/storage_common.c
index 04c462f..484acfb 100644
--- a/drivers/usb/gadget/storage_common.c
+++ b/drivers/usb/gadget/storage_common.c
@@ -57,10 +57,12 @@
 #include <asm/unaligned.h>
 
 
-/* Thanks to NetChip Technologies for donating this product ID.
+/*
+ * Thanks to NetChip Technologies for donating this product ID.
  *
  * DO NOT REUSE THESE IDs with any other driver!!  Ever!!
- * Instead:  allocate your own, using normal USB-IF procedures. */
+ * Instead:  allocate your own, using normal USB-IF procedures.
+ */
 #define FSG_VENDOR_ID	0x0525	/* NetChip */
 #define FSG_PRODUCT_ID	0xa4a5	/* Linux-USB File-backed Storage Gadget */
 
@@ -84,14 +86,27 @@
 #define LWARN(lun, fmt, args...)  dev_warn(&(lun)->dev, fmt, ## args)
 #define LINFO(lun, fmt, args...)  dev_info(&(lun)->dev, fmt, ## args)
 
-/* Keep those macros in sync with thos in
- * include/linux/ubs/composite.h or else GCC will complain.  If they
+/*
+ * Keep those macros in sync with those in
+ * include/linux/usb/composite.h or else GCC will complain.  If they
  * are identical (the same names of arguments, white spaces in the
  * same places) GCC will allow redefinition otherwise (even if some
- * white space is removed or added) warning will be issued.  No
- * checking if those symbols is defined is performed because warning
- * is desired when those macros were defined by someone else to mean
- * something else. */
+ * white space is removed or added) warning will be issued.
+ *
+ * Those macros are needed here because File Storage Gadget does not
+ * include the composite.h header.  For composite gadgets those macros
+ * are redundant since composite.h is included any way.
+ *
+ * One could check whether those macros are already defined (which
+ * would indicate composite.h had been included) or not (which would
+ * indicate we were in FSG) but this is not done because a warning is
+ * desired if definitions here differ from the ones in composite.h.
+ *
+ * We want the definitions to match and be the same in File Storage
+ * Gadget as well as Mass Storage Function (and so composite gadgets
+ * using MSF).  If someone changes them in composite.h it will produce
+ * a warning in this file when building MSF.
+ */
 #define DBG(d, fmt, args...)     dev_dbg(&(d)->gadget->dev , fmt , ## args)
 #define VDBG(d, fmt, args...)    dev_vdbg(&(d)->gadget->dev , fmt , ## args)
 #define ERROR(d, fmt, args...)   dev_err(&(d)->gadget->dev , fmt , ## args)
@@ -269,6 +284,7 @@ struct fsg_lun {
 	unsigned int	prevent_medium_removal:1;
 	unsigned int	registered:1;
 	unsigned int	info_valid:1;
+	unsigned int	nofua:1;
 
 	u32		sense_data;
 	u32		sense_data_info;
@@ -313,9 +329,11 @@ struct fsg_buffhd {
 	enum fsg_buffer_state		state;
 	struct fsg_buffhd		*next;
 
-	/* The NetChip 2280 is faster, and handles some protocol faults
+	/*
+	 * The NetChip 2280 is faster, and handles some protocol faults
 	 * better, if we don't submit any short bulk-out read requests.
-	 * So we will record the intended request length here. */
+	 * So we will record the intended request length here.
+	 */
 	unsigned int			bulk_out_intended_length;
 
 	struct usb_request		*inreq;
@@ -395,8 +413,10 @@ fsg_intf_desc = {
 	.iInterface =		FSG_STRING_INTERFACE,
 };
 
-/* Three full-speed endpoint descriptors: bulk-in, bulk-out,
- * and interrupt-in. */
+/*
+ * Three full-speed endpoint descriptors: bulk-in, bulk-out, and
+ * interrupt-in.
+ */
 
 static struct usb_endpoint_descriptor
 fsg_fs_bulk_in_desc = {
@@ -459,7 +479,7 @@ static struct usb_descriptor_header *fsg_fs_function[] = {
  *
  * That means alternate endpoint descriptors (bigger packets)
  * and a "device qualifier" ... plus more construction options
- * for the config descriptor.
+ * for the configuration descriptor.
  */
 static struct usb_endpoint_descriptor
 fsg_hs_bulk_in_desc = {
@@ -547,8 +567,10 @@ static struct usb_gadget_strings	fsg_stringtab = {
 
  /*-------------------------------------------------------------------------*/
 
-/* If the next two routines are called while the gadget is registered,
- * the caller must own fsg->filesem for writing. */
+/*
+ * If the next two routines are called while the gadget is registered,
+ * the caller must own fsg->filesem for writing.
+ */
 
 static int fsg_lun_open(struct fsg_lun *curlun, const char *filename)
 {
@@ -587,8 +609,10 @@ static int fsg_lun_open(struct fsg_lun *curlun, const char *filename)
 		goto out;
 	}
 
-	/* If we can't read the file, it's no good.
-	 * If we can't write the file, use it read-only. */
+	/*
+	 * If we can't read the file, it's no good.
+	 * If we can't write the file, use it read-only.
+	 */
 	if (!filp->f_op || !(filp->f_op->read || filp->f_op->aio_read)) {
 		LINFO(curlun, "file not readable: %s\n", filename);
 		goto out;
@@ -646,8 +670,10 @@ static void fsg_lun_close(struct fsg_lun *curlun)
 
 /*-------------------------------------------------------------------------*/
 
-/* Sync the file data, don't bother with the metadata.
- * This code was copied from fs/buffer.c:sys_fdatasync(). */
+/*
+ * Sync the file data, don't bother with the metadata.
+ * This code was copied from fs/buffer.c:sys_fdatasync().
+ */
 static int fsg_lun_fsync_sub(struct fsg_lun *curlun)
 {
 	struct file	*filp = curlun->filp;
@@ -689,6 +715,14 @@ static ssize_t fsg_show_ro(struct device *dev, struct device_attribute *attr,
 				  : curlun->initially_ro);
 }
 
+static ssize_t fsg_show_nofua(struct device *dev, struct device_attribute *attr,
+			      char *buf)
+{
+	struct fsg_lun	*curlun = fsg_lun_from_dev(dev);
+
+	return sprintf(buf, "%u\n", curlun->nofua);
+}
+
 static ssize_t fsg_show_file(struct device *dev, struct device_attribute *attr,
 			     char *buf)
 {
@@ -723,26 +757,47 @@ static ssize_t fsg_store_ro(struct device *dev, struct device_attribute *attr,
 	ssize_t		rc = count;
 	struct fsg_lun	*curlun = fsg_lun_from_dev(dev);
 	struct rw_semaphore	*filesem = dev_get_drvdata(dev);
-	int		i;
+	unsigned long	ro;
 
-	if (sscanf(buf, "%d", &i) != 1)
+	if (strict_strtoul(buf, 2, &ro))
 		return -EINVAL;
 
-	/* Allow the write-enable status to change only while the backing file
-	 * is closed. */
+	/*
+	 * Allow the write-enable status to change only while the
+	 * backing file is closed.
+	 */
 	down_read(filesem);
 	if (fsg_lun_is_open(curlun)) {
 		LDBG(curlun, "read-only status change prevented\n");
 		rc = -EBUSY;
 	} else {
-		curlun->ro = !!i;
-		curlun->initially_ro = !!i;
+		curlun->ro = ro;
+		curlun->initially_ro = ro;
 		LDBG(curlun, "read-only status set to %d\n", curlun->ro);
 	}
 	up_read(filesem);
 	return rc;
 }
 
+static ssize_t fsg_store_nofua(struct device *dev,
+			       struct device_attribute *attr,
+			       const char *buf, size_t count)
+{
+	struct fsg_lun	*curlun = fsg_lun_from_dev(dev);
+	unsigned long	nofua;
+
+	if (strict_strtoul(buf, 2, &nofua))
+		return -EINVAL;
+
+	/* Sync data when switching from async mode to sync */
+	if (!nofua && curlun->nofua)
+		fsg_lun_fsync_sub(curlun);
+
+	curlun->nofua = nofua;
+
+	return count;
+}
+
 static ssize_t fsg_store_file(struct device *dev, struct device_attribute *attr,
 			      const char *buf, size_t count)
 {
diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c
index 1da755a..6bb876d 100644
--- a/drivers/usb/gadget/u_ether.c
+++ b/drivers/usb/gadget/u_ether.c
@@ -704,17 +704,6 @@ static char *host_addr;
 module_param(host_addr, charp, S_IRUGO);
 MODULE_PARM_DESC(host_addr, "Host Ethernet Address");
 
-
-static u8 __init nibble(unsigned char c)
-{
-	if (isdigit(c))
-		return c - '0';
-	c = toupper(c);
-	if (isxdigit(c))
-		return 10 + c - 'A';
-	return 0;
-}
-
 static int get_ether_addr(const char *str, u8 *dev_addr)
 {
 	if (str) {
@@ -725,8 +714,8 @@ static int get_ether_addr(const char *str, u8 *dev_addr)
 
 			if ((*str == '.') || (*str == ':'))
 				str++;
-			num = nibble(*str++) << 4;
-			num |= (nibble(*str++));
+			num = hex_to_bin(*str++) << 4;
+			num |= hex_to_bin(*str++);
 			dev_addr [i] = num;
 		}
 		if (is_valid_ether_addr(dev_addr))
diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c
index 3e8dcb5..01e5354 100644
--- a/drivers/usb/gadget/u_serial.c
+++ b/drivers/usb/gadget/u_serial.c
@@ -18,6 +18,7 @@
 /* #define VERBOSE_DEBUG */
 
 #include <linux/kernel.h>
+#include <linux/sched.h>
 #include <linux/interrupt.h>
 #include <linux/device.h>
 #include <linux/delay.h>
diff --git a/drivers/usb/gadget/webcam.c b/drivers/usb/gadget/webcam.c
index 288d211..de1deb7 100644
--- a/drivers/usb/gadget/webcam.c
+++ b/drivers/usb/gadget/webcam.c
@@ -308,7 +308,7 @@ static const struct uvc_descriptor_header * const uvc_hs_streaming_cls[] = {
  * USB configuration
  */
 
-static int __init
+static int __ref
 webcam_config_bind(struct usb_configuration *c)
 {
 	return uvc_bind_config(c, uvc_control_cls, uvc_fs_streaming_cls,
@@ -330,7 +330,7 @@ webcam_unbind(struct usb_composite_dev *cdev)
 	return 0;
 }
 
-static int __init
+static int __ref
 webcam_bind(struct usb_composite_dev *cdev)
 {
 	int ret;
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
index 807280d..cf35392 100644
--- a/drivers/usb/gadget/zero.c
+++ b/drivers/usb/gadget/zero.c
@@ -264,7 +264,7 @@ static void zero_resume(struct usb_composite_dev *cdev)
 
 /*-------------------------------------------------------------------------*/
 
-static int __init zero_bind(struct usb_composite_dev *cdev)
+static int __ref zero_bind(struct usb_composite_dev *cdev)
 {
 	int			gcnum;
 	struct usb_gadget	*gadget = cdev->gadget;
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index f865be2..2d926ce 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -72,8 +72,9 @@ config USB_EHCI_ROOT_HUB_TT
 	  from ARC, and has since changed hands a few times.
 
 config USB_EHCI_TT_NEWSCHED
-	bool "Improved Transaction Translator scheduling (EXPERIMENTAL)"
-	depends on USB_EHCI_HCD && EXPERIMENTAL
+	bool "Improved Transaction Translator scheduling"
+	depends on USB_EHCI_HCD
+	default y
 	---help---
 	  This changes the periodic scheduling code to fill more of the low
 	  and full speed bandwidth available from the Transaction Translator
@@ -84,9 +85,11 @@ config USB_EHCI_TT_NEWSCHED
 	  If you have multiple periodic low/fullspeed devices connected to a
 	  highspeed USB hub which is connected to a highspeed USB Host
 	  Controller, and some of those devices will not work correctly
-	  (possibly due to "ENOSPC" or "-28" errors), say Y.
+	  (possibly due to "ENOSPC" or "-28" errors), say Y.  Conversely, if
+	  you have only one such device and it doesn't work, you could try
+	  saying N.
 
-	  If unsure, say N.
+	  If unsure, say Y.
 
 config USB_EHCI_BIG_ENDIAN_MMIO
 	bool
diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c
index faa6174..2baf8a8 100644
--- a/drivers/usb/host/ehci-au1xxx.c
+++ b/drivers/usb/host/ehci-au1xxx.c
@@ -228,7 +228,7 @@ static int ehci_hcd_au1xxx_drv_suspend(struct device *dev)
 	 * the root hub is either suspended or stopped.
 	 */
 	spin_lock_irqsave(&ehci->lock, flags);
-	ehci_prepare_ports_for_controller_suspend(ehci);
+	ehci_prepare_ports_for_controller_suspend(ehci, device_may_wakeup(dev));
 	ehci_writel(ehci, 0, &ehci->regs->intr_enable);
 	(void)ehci_readl(ehci, &ehci->regs->intr_enable);
 
diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c
index 874d200..76b7fd2 100644
--- a/drivers/usb/host/ehci-dbg.c
+++ b/drivers/usb/host/ehci-dbg.c
@@ -98,13 +98,18 @@ static void dbg_hcc_params (struct ehci_hcd *ehci, char *label)
 			HCC_64BIT_ADDR(params) ? " 64 bit addr" : "");
 	} else {
 		ehci_dbg (ehci,
-			"%s hcc_params %04x thresh %d uframes %s%s%s\n",
+			"%s hcc_params %04x thresh %d uframes %s%s%s%s%s%s%s\n",
 			label,
 			params,
 			HCC_ISOC_THRES(params),
 			HCC_PGM_FRAMELISTLEN(params) ? "256/512/1024" : "1024",
 			HCC_CANPARK(params) ? " park" : "",
-			HCC_64BIT_ADDR(params) ? " 64 bit addr" : "");
+			HCC_64BIT_ADDR(params) ? " 64 bit addr" : "",
+			HCC_LPM(params) ? " LPM" : "",
+			HCC_PER_PORT_CHANGE_EVENT(params) ? " ppce" : "",
+			HCC_HW_PREFETCH(params) ? " hw prefetch" : "",
+			HCC_32FRAME_PERIODIC_LIST(params) ?
+				" 32 peridic list" : "");
 	}
 }
 #else
@@ -191,8 +196,9 @@ static int __maybe_unused
 dbg_status_buf (char *buf, unsigned len, const char *label, u32 status)
 {
 	return scnprintf (buf, len,
-		"%s%sstatus %04x%s%s%s%s%s%s%s%s%s%s",
+		"%s%sstatus %04x%s%s%s%s%s%s%s%s%s%s%s",
 		label, label [0] ? " " : "", status,
+		(status & STS_PPCE_MASK) ? " PPCE" : "",
 		(status & STS_ASS) ? " Async" : "",
 		(status & STS_PSS) ? " Periodic" : "",
 		(status & STS_RECL) ? " Recl" : "",
@@ -210,8 +216,9 @@ static int __maybe_unused
 dbg_intr_buf (char *buf, unsigned len, const char *label, u32 enable)
 {
 	return scnprintf (buf, len,
-		"%s%sintrenable %02x%s%s%s%s%s%s",
+		"%s%sintrenable %02x%s%s%s%s%s%s%s",
 		label, label [0] ? " " : "", enable,
+		(enable & STS_PPCE_MASK) ? " PPCE" : "",
 		(enable & STS_IAA) ? " IAA" : "",
 		(enable & STS_FATAL) ? " FATAL" : "",
 		(enable & STS_FLR) ? " FLR" : "",
@@ -228,9 +235,15 @@ static int
 dbg_command_buf (char *buf, unsigned len, const char *label, u32 command)
 {
 	return scnprintf (buf, len,
-		"%s%scommand %06x %s=%d ithresh=%d%s%s%s%s period=%s%s %s",
+		"%s%scommand %07x %s%s%s%s%s%s=%d ithresh=%d%s%s%s%s "
+		"period=%s%s %s",
 		label, label [0] ? " " : "", command,
-		(command & CMD_PARK) ? "park" : "(park)",
+		(command & CMD_HIRD) ? " HIRD" : "",
+		(command & CMD_PPCEE) ? " PPCEE" : "",
+		(command & CMD_FSP) ? " FSP" : "",
+		(command & CMD_ASPE) ? " ASPE" : "",
+		(command & CMD_PSPE) ? " PSPE" : "",
+		(command & CMD_PARK) ? " park" : "(park)",
 		CMD_PARK_CNT (command),
 		(command >> 16) & 0x3f,
 		(command & CMD_LRESET) ? " LReset" : "",
@@ -257,11 +270,22 @@ dbg_port_buf (char *buf, unsigned len, const char *label, int port, u32 status)
 	}
 
 	return scnprintf (buf, len,
-		"%s%sport %d status %06x%s%s sig=%s%s%s%s%s%s%s%s%s%s",
+		"%s%sport:%d status %06x %d %s%s%s%s%s%s "
+		"sig=%s%s%s%s%s%s%s%s%s%s%s",
 		label, label [0] ? " " : "", port, status,
+		status>>25,/*device address */
+		(status & PORT_SSTS)>>23 == PORTSC_SUSPEND_STS_ACK ?
+						" ACK" : "",
+		(status & PORT_SSTS)>>23 == PORTSC_SUSPEND_STS_NYET ?
+						" NYET" : "",
+		(status & PORT_SSTS)>>23 == PORTSC_SUSPEND_STS_STALL ?
+						" STALL" : "",
+		(status & PORT_SSTS)>>23 == PORTSC_SUSPEND_STS_ERR ?
+						" ERR" : "",
 		(status & PORT_POWER) ? " POWER" : "",
 		(status & PORT_OWNER) ? " OWNER" : "",
 		sig,
+		(status & PORT_LPM) ? " LPM" : "",
 		(status & PORT_RESET) ? " RESET" : "",
 		(status & PORT_SUSPEND) ? " SUSPEND" : "",
 		(status & PORT_RESUME) ? " RESUME" : "",
@@ -330,6 +354,13 @@ static int debug_async_open(struct inode *, struct file *);
 static int debug_periodic_open(struct inode *, struct file *);
 static int debug_registers_open(struct inode *, struct file *);
 static int debug_async_open(struct inode *, struct file *);
+static int debug_lpm_open(struct inode *, struct file *);
+static ssize_t debug_lpm_read(struct file *file, char __user *user_buf,
+				   size_t count, loff_t *ppos);
+static ssize_t debug_lpm_write(struct file *file, const char __user *buffer,
+			      size_t count, loff_t *ppos);
+static int debug_lpm_close(struct inode *inode, struct file *file);
+
 static ssize_t debug_output(struct file*, char __user*, size_t, loff_t*);
 static int debug_close(struct inode *, struct file *);
 
@@ -351,6 +382,13 @@ static const struct file_operations debug_registers_fops = {
 	.read		= debug_output,
 	.release	= debug_close,
 };
+static const struct file_operations debug_lpm_fops = {
+	.owner		= THIS_MODULE,
+	.open		= debug_lpm_open,
+	.read		= debug_lpm_read,
+	.write		= debug_lpm_write,
+	.release	= debug_lpm_close,
+};
 
 static struct dentry *ehci_debug_root;
 
@@ -674,7 +712,7 @@ static ssize_t fill_registers_buffer(struct debug_buffer *buf)
 
 	spin_lock_irqsave (&ehci->lock, flags);
 
-	if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
+	if (!HCD_HW_ACCESSIBLE(hcd)) {
 		size = scnprintf (next, size,
 			"bus %s, device %s\n"
 			"%s\n"
@@ -917,51 +955,127 @@ static int debug_registers_open(struct inode *inode, struct file *file)
 	return file->private_data ? 0 : -ENOMEM;
 }
 
+static int debug_lpm_open(struct inode *inode, struct file *file)
+{
+	file->private_data = inode->i_private;
+	return 0;
+}
+
+static int debug_lpm_close(struct inode *inode, struct file *file)
+{
+	return 0;
+}
+
+static ssize_t debug_lpm_read(struct file *file, char __user *user_buf,
+				   size_t count, loff_t *ppos)
+{
+	/* TODO: show lpm stats */
+	return 0;
+}
+
+static ssize_t debug_lpm_write(struct file *file, const char __user *user_buf,
+			      size_t count, loff_t *ppos)
+{
+	struct usb_hcd		*hcd;
+	struct ehci_hcd		*ehci;
+	char buf[50];
+	size_t len;
+	u32 temp;
+	unsigned long port;
+	u32 __iomem	*portsc ;
+	u32 params;
+
+	hcd = bus_to_hcd(file->private_data);
+	ehci = hcd_to_ehci(hcd);
+
+	len = min(count, sizeof(buf) - 1);
+	if (copy_from_user(buf, user_buf, len))
+		return -EFAULT;
+	buf[len] = '\0';
+	if (len > 0 && buf[len - 1] == '\n')
+		buf[len - 1] = '\0';
+
+	if (strncmp(buf, "enable", 5) == 0) {
+		if (strict_strtoul(buf + 7, 10, &port))
+			return -EINVAL;
+		params = ehci_readl(ehci, &ehci->caps->hcs_params);
+		if (port > HCS_N_PORTS(params)) {
+			ehci_dbg(ehci, "ERR: LPM on bad port %lu\n", port);
+			return -ENODEV;
+		}
+		portsc = &ehci->regs->port_status[port-1];
+		temp = ehci_readl(ehci, portsc);
+		if (!(temp & PORT_DEV_ADDR)) {
+			ehci_dbg(ehci, "LPM: no device attached\n");
+			return -ENODEV;
+		}
+		temp |= PORT_LPM;
+		ehci_writel(ehci, temp, portsc);
+		printk(KERN_INFO "force enable LPM for port %lu\n", port);
+	} else if (strncmp(buf, "hird=", 5) == 0) {
+		unsigned long hird;
+		if (strict_strtoul(buf + 5, 16, &hird))
+			return -EINVAL;
+		printk(KERN_INFO "setting hird %s %lu\n", buf + 6, hird);
+		temp = ehci_readl(ehci, &ehci->regs->command);
+		temp &= ~CMD_HIRD;
+		temp |= hird << 24;
+		ehci_writel(ehci, temp, &ehci->regs->command);
+	} else if (strncmp(buf, "disable", 7) == 0) {
+		if (strict_strtoul(buf + 8, 10, &port))
+			return -EINVAL;
+		params = ehci_readl(ehci, &ehci->caps->hcs_params);
+		if (port > HCS_N_PORTS(params)) {
+			ehci_dbg(ehci, "ERR: LPM off bad port %lu\n", port);
+			return -ENODEV;
+		}
+		portsc = &ehci->regs->port_status[port-1];
+		temp = ehci_readl(ehci, portsc);
+		if (!(temp & PORT_DEV_ADDR)) {
+			ehci_dbg(ehci, "ERR: no device attached\n");
+			return -ENODEV;
+		}
+		temp &= ~PORT_LPM;
+		ehci_writel(ehci, temp, portsc);
+		printk(KERN_INFO "disabled LPM for port %lu\n", port);
+	} else
+		return -EOPNOTSUPP;
+	return count;
+}
+
 static inline void create_debug_files (struct ehci_hcd *ehci)
 {
 	struct usb_bus *bus = &ehci_to_hcd(ehci)->self;
 
 	ehci->debug_dir = debugfs_create_dir(bus->bus_name, ehci_debug_root);
 	if (!ehci->debug_dir)
-		goto dir_error;
-
-	ehci->debug_async = debugfs_create_file("async", S_IRUGO,
-						ehci->debug_dir, bus,
-						&debug_async_fops);
-	if (!ehci->debug_async)
-		goto async_error;
-
-	ehci->debug_periodic = debugfs_create_file("periodic", S_IRUGO,
-						   ehci->debug_dir, bus,
-						   &debug_periodic_fops);
-	if (!ehci->debug_periodic)
-		goto periodic_error;
-
-	ehci->debug_registers = debugfs_create_file("registers", S_IRUGO,
-						    ehci->debug_dir, bus,
-						    &debug_registers_fops);
-	if (!ehci->debug_registers)
-		goto registers_error;
+		return;
+
+	if (!debugfs_create_file("async", S_IRUGO, ehci->debug_dir, bus,
+						&debug_async_fops))
+		goto file_error;
+
+	if (!debugfs_create_file("periodic", S_IRUGO, ehci->debug_dir, bus,
+						&debug_periodic_fops))
+		goto file_error;
+
+	if (!debugfs_create_file("registers", S_IRUGO, ehci->debug_dir, bus,
+						    &debug_registers_fops))
+		goto file_error;
+
+	if (!debugfs_create_file("lpm", S_IRUGO|S_IWUGO, ehci->debug_dir, bus,
+						    &debug_lpm_fops))
+		goto file_error;
+
 	return;
 
-registers_error:
-	debugfs_remove(ehci->debug_periodic);
-periodic_error:
-	debugfs_remove(ehci->debug_async);
-async_error:
-	debugfs_remove(ehci->debug_dir);
-dir_error:
-	ehci->debug_periodic = NULL;
-	ehci->debug_async = NULL;
-	ehci->debug_dir = NULL;
+file_error:
+	debugfs_remove_recursive(ehci->debug_dir);
 }
 
 static inline void remove_debug_files (struct ehci_hcd *ehci)
 {
-	debugfs_remove(ehci->debug_registers);
-	debugfs_remove(ehci->debug_periodic);
-	debugfs_remove(ehci->debug_async);
-	debugfs_remove(ehci->debug_dir);
+	debugfs_remove_recursive(ehci->debug_dir);
 }
 
 #endif /* STUB_DEBUG_FILES */
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index 5cd967d..a416421 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -313,7 +313,8 @@ static int ehci_fsl_drv_suspend(struct device *dev)
 	struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd);
 	void __iomem *non_ehci = hcd->regs;
 
-	ehci_prepare_ports_for_controller_suspend(hcd_to_ehci(hcd));
+	ehci_prepare_ports_for_controller_suspend(hcd_to_ehci(hcd),
+			device_may_wakeup(dev));
 	if (!fsl_deep_sleep())
 		return 0;
 
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 6fcffe1..ac0f7a4 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -36,6 +36,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/debugfs.h>
 #include <linux/slab.h>
+#include <linux/uaccess.h>
 
 #include <asm/byteorder.h>
 #include <asm/io.h>
@@ -78,7 +79,13 @@ static const char	hcd_name [] = "ehci_hcd";
 #define	EHCI_TUNE_RL_TT		0
 #define	EHCI_TUNE_MULT_HS	1	/* 1-3 transactions/uframe; 4.10.3 */
 #define	EHCI_TUNE_MULT_TT	1
-#define	EHCI_TUNE_FLS		2	/* (small) 256 frame schedule */
+/*
+ * Some drivers think it's safe to schedule isochronous transfers more than
+ * 256 ms into the future (partly as a result of an old bug in the scheduling
+ * code).  In an attempt to avoid trouble, we will use a minimum scheduling
+ * length of 512 frames instead of 256.
+ */
+#define	EHCI_TUNE_FLS		1	/* (medium) 512-frame schedule */
 
 #define EHCI_IAA_MSECS		10		/* arbitrary */
 #define EHCI_IO_JIFFIES		(HZ/10)		/* io watchdog > irq_thresh */
@@ -100,6 +107,11 @@ static int ignore_oc = 0;
 module_param (ignore_oc, bool, S_IRUGO);
 MODULE_PARM_DESC (ignore_oc, "ignore bogus hardware overcurrent indications");
 
+/* for link power management(LPM) feature */
+static unsigned int hird;
+module_param(hird, int, S_IRUGO);
+MODULE_PARM_DESC(hird, "host initiated resume duration, +1 for each 75us\n");
+
 #define	INTR_MASK (STS_IAA | STS_FATAL | STS_PCD | STS_ERR | STS_INT)
 
 /*-------------------------------------------------------------------------*/
@@ -304,6 +316,7 @@ static void end_unlink_async(struct ehci_hcd *ehci);
 static void ehci_work(struct ehci_hcd *ehci);
 
 #include "ehci-hub.c"
+#include "ehci-lpm.c"
 #include "ehci-mem.c"
 #include "ehci-q.c"
 #include "ehci-sched.c"
@@ -577,6 +590,11 @@ static int ehci_init(struct usb_hcd *hcd)
 	if (log2_irq_thresh < 0 || log2_irq_thresh > 6)
 		log2_irq_thresh = 0;
 	temp = 1 << (16 + log2_irq_thresh);
+	if (HCC_PER_PORT_CHANGE_EVENT(hcc_params)) {
+		ehci->has_ppcd = 1;
+		ehci_dbg(ehci, "enable per-port change event\n");
+		temp |= CMD_PPCEE;
+	}
 	if (HCC_CANPARK(hcc_params)) {
 		/* HW default park == 3, on hardware that supports it (like
 		 * NVidia and ALI silicon), maximizes throughput on the async
@@ -603,10 +621,22 @@ static int ehci_init(struct usb_hcd *hcd)
 		default:	BUG();
 		}
 	}
+	if (HCC_LPM(hcc_params)) {
+		/* support link power management EHCI 1.1 addendum */
+		ehci_dbg(ehci, "support lpm\n");
+		ehci->has_lpm = 1;
+		if (hird > 0xf) {
+			ehci_dbg(ehci, "hird %d invalid, use default 0",
+			hird);
+			hird = 0;
+		}
+		temp |= hird << 24;
+	}
 	ehci->command = temp;
 
 	/* Accept arbitrarily long scatter-gather lists */
-	hcd->self.sg_tablesize = ~0;
+	if (!(hcd->driver->flags & HCD_LOCAL_MEM))
+		hcd->self.sg_tablesize = ~0;
 	return 0;
 }
 
@@ -619,7 +649,6 @@ static int ehci_run (struct usb_hcd *hcd)
 	u32			hcc_params;
 
 	hcd->uses_new_polling = 1;
-	hcd->poll_rh = 0;
 
 	/* EHCI spec section 4.1 */
 	if ((retval = ehci_reset(ehci)) != 0) {
@@ -764,6 +793,7 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd)
 	/* remote wakeup [4.3.1] */
 	if (status & STS_PCD) {
 		unsigned	i = HCS_N_PORTS (ehci->hcs_params);
+		u32		ppcd = 0;
 
 		/* kick root hub later */
 		pcd_status = status;
@@ -772,9 +802,18 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd)
 		if (!(cmd & CMD_RUN))
 			usb_hcd_resume_root_hub(hcd);
 
+		/* get per-port change detect bits */
+		if (ehci->has_ppcd)
+			ppcd = status >> 16;
+
 		while (i--) {
-			int pstatus = ehci_readl(ehci,
-						 &ehci->regs->port_status [i]);
+			int pstatus;
+
+			/* leverage per-port change bits feature */
+			if (ehci->has_ppcd && !(ppcd & (1 << i)))
+				continue;
+			pstatus = ehci_readl(ehci,
+					 &ehci->regs->port_status[i]);
 
 			if (pstatus & PORT_OWNER)
 				continue;
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index e7d3d8d..796ea0c 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -107,7 +107,7 @@ static void ehci_handover_companion_ports(struct ehci_hcd *ehci)
 }
 
 static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
-		bool suspending)
+		bool suspending, bool do_wakeup)
 {
 	int		port;
 	u32		temp;
@@ -117,8 +117,7 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
 	 * when the controller is suspended or resumed.  In all other
 	 * cases they don't need to be changed.
 	 */
-	if (!ehci_to_hcd(ehci)->self.root_hub->do_remote_wakeup ||
-			device_may_wakeup(ehci_to_hcd(ehci)->self.controller))
+	if (!ehci_to_hcd(ehci)->self.root_hub->do_remote_wakeup || do_wakeup)
 		return;
 
 	/* clear phy low-power mode before changing wakeup flags */
@@ -167,6 +166,10 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
 			ehci_writel(ehci, temp | HOSTPC_PHCD, hostpc_reg);
 		}
 	}
+
+	/* Does the root hub have a port wakeup pending? */
+	if (!suspending && (ehci_readl(ehci, &ehci->regs->status) & STS_PCD))
+		usb_hcd_resume_root_hub(ehci_to_hcd(ehci));
 }
 
 static int ehci_bus_suspend (struct usb_hcd *hcd)
@@ -316,7 +319,7 @@ static int ehci_bus_resume (struct usb_hcd *hcd)
 	if (time_before (jiffies, ehci->next_statechange))
 		msleep(5);
 	spin_lock_irq (&ehci->lock);
-	if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
+	if (!HCD_HW_ACCESSIBLE(hcd)) {
 		spin_unlock_irq(&ehci->lock);
 		return -ESHUTDOWN;
 	}
@@ -603,6 +606,7 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
 	u32		mask;
 	int		ports, i, retval = 1;
 	unsigned long	flags;
+	u32		ppcd = 0;
 
 	/* if !USB_SUSPEND, root hub timers won't get shut down ... */
 	if (!HC_IS_RUNNING(hcd->state))
@@ -632,7 +636,15 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
 
 	/* port N changes (bit N)? */
 	spin_lock_irqsave (&ehci->lock, flags);
+
+	/* get per-port change detect bits */
+	if (ehci->has_ppcd)
+		ppcd = ehci_readl(ehci, &ehci->regs->status) >> 16;
+
 	for (i = 0; i < ports; i++) {
+		/* leverage per-port change bits feature */
+		if (ehci->has_ppcd && !(ppcd & (1 << i)))
+			continue;
 		temp = ehci_readl(ehci, &ehci->regs->port_status [i]);
 
 		/*
@@ -790,6 +802,11 @@ static int ehci_hub_control (
 					  status_reg);
 			break;
 		case USB_PORT_FEAT_C_CONNECTION:
+			if (ehci->has_lpm) {
+				/* clear PORTSC bits on disconnect */
+				temp &= ~PORT_LPM;
+				temp &= ~PORT_DEV_ADDR;
+			}
 			ehci_writel(ehci, (temp & ~PORT_RWC_BITS) | PORT_CSC,
 					status_reg);
 			break;
diff --git a/drivers/usb/host/ehci-lpm.c b/drivers/usb/host/ehci-lpm.c
new file mode 100644
index 0000000..b4d4d63
--- /dev/null
+++ b/drivers/usb/host/ehci-lpm.c
@@ -0,0 +1,83 @@
+/* ehci-lpm.c EHCI HCD LPM support code
+ * Copyright (c) 2008 - 2010,  Intel Corporation.
+ * Author: Jacob Pan <jacob.jun.pan@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/* this file is part of ehci-hcd.c */
+static int ehci_lpm_set_da(struct ehci_hcd *ehci, int dev_addr, int port_num)
+{
+	u32 __iomem portsc;
+
+	ehci_dbg(ehci, "set dev address %d for port %d\n", dev_addr, port_num);
+	if (port_num > HCS_N_PORTS(ehci->hcs_params)) {
+		ehci_dbg(ehci, "invalid port number %d\n", port_num);
+		return -ENODEV;
+	}
+	portsc = ehci_readl(ehci, &ehci->regs->port_status[port_num-1]);
+	portsc &= ~PORT_DEV_ADDR;
+	portsc |= dev_addr<<25;
+	ehci_writel(ehci, portsc, &ehci->regs->port_status[port_num-1]);
+	return 0;
+}
+
+/*
+ * this function is used to check if the device support LPM
+ * if yes, mark the PORTSC register with PORT_LPM bit
+ */
+static int ehci_lpm_check(struct ehci_hcd *ehci, int port)
+{
+	u32 __iomem	*portsc ;
+	u32 val32;
+	int retval;
+
+	portsc = &ehci->regs->port_status[port-1];
+	val32 = ehci_readl(ehci, portsc);
+	if (!(val32 & PORT_DEV_ADDR)) {
+		ehci_dbg(ehci, "LPM: no device attached\n");
+		return -ENODEV;
+	}
+	val32 |= PORT_LPM;
+	ehci_writel(ehci, val32, portsc);
+	msleep(5);
+	val32 |= PORT_SUSPEND;
+	ehci_dbg(ehci, "Sending LPM 0x%08x to port %d\n", val32, port);
+	ehci_writel(ehci, val32, portsc);
+	/* wait for ACK */
+	msleep(10);
+	retval = handshake(ehci, &ehci->regs->port_status[port-1], PORT_SSTS,
+			PORTSC_SUSPEND_STS_ACK, 125);
+	dbg_port(ehci, "LPM", port, val32);
+	if (retval != -ETIMEDOUT) {
+		ehci_dbg(ehci, "LPM: device ACK for LPM\n");
+		val32 |= PORT_LPM;
+		/*
+		 * now device should be in L1 sleep, let's wake up the device
+		 * so that we can complete enumeration.
+		 */
+		ehci_writel(ehci, val32, portsc);
+		msleep(10);
+		val32 |= PORT_RESUME;
+		ehci_writel(ehci, val32, portsc);
+	} else {
+		ehci_dbg(ehci, "LPM: device does not ACK, disable LPM %d\n",
+			retval);
+		val32 &= ~PORT_LPM;
+		retval = -ETIMEDOUT;
+		ehci_writel(ehci, val32, portsc);
+	}
+
+	return retval;
+}
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index 5450e62..116ae28 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -38,6 +38,7 @@
 #include <linux/gpio.h>
 #include <linux/regulator/consumer.h>
 #include <linux/slab.h>
+#include <linux/usb/ulpi.h>
 #include <plat/usb.h>
 
 /*
@@ -236,6 +237,35 @@ static void omap_usb_utmi_init(struct ehci_hcd_omap *omap, u8 tll_channel_mask)
 
 /*-------------------------------------------------------------------------*/
 
+static void omap_ehci_soft_phy_reset(struct ehci_hcd_omap *omap, u8 port)
+{
+	unsigned long timeout = jiffies + msecs_to_jiffies(1000);
+	unsigned reg = 0;
+
+	reg = ULPI_FUNC_CTRL_RESET
+		/* FUNCTION_CTRL_SET register */
+		| (ULPI_SET(ULPI_FUNC_CTRL) << EHCI_INSNREG05_ULPI_REGADD_SHIFT)
+		/* Write */
+		| (2 << EHCI_INSNREG05_ULPI_OPSEL_SHIFT)
+		/* PORTn */
+		| ((port + 1) << EHCI_INSNREG05_ULPI_PORTSEL_SHIFT)
+		/* start ULPI access*/
+		| (1 << EHCI_INSNREG05_ULPI_CONTROL_SHIFT);
+
+	ehci_omap_writel(omap->ehci_base, EHCI_INSNREG05_ULPI, reg);
+
+	/* Wait for ULPI access completion */
+	while ((ehci_omap_readl(omap->ehci_base, EHCI_INSNREG05_ULPI)
+			& (1 << EHCI_INSNREG05_ULPI_CONTROL_SHIFT))) {
+		cpu_relax();
+
+		if (time_after(jiffies, timeout)) {
+			dev_dbg(omap->dev, "phy reset operation timed out\n");
+			break;
+		}
+	}
+}
+
 /* omap_start_ehc
  *	- Start the TI USBHOST controller
  */
@@ -425,6 +455,12 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
 			gpio_set_value(omap->reset_gpio_port[1], 1);
 	}
 
+	/* Soft reset the PHY using PHY reset command over ULPI */
+	if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_PHY)
+		omap_ehci_soft_phy_reset(omap, 0);
+	if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_PHY)
+		omap_ehci_soft_phy_reset(omap, 1);
+
 	return 0;
 
 err_sys_status:
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index d43d176..58b72d7 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -114,6 +114,7 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 		break;
 	case PCI_VENDOR_ID_INTEL:
 		ehci->need_io_watchdog = 0;
+		ehci->fs_i_thresh = 1;
 		if (pdev->device == 0x27cc) {
 			ehci->broken_periodic = 1;
 			ehci_info(ehci, "using broken periodic workaround\n");
@@ -277,7 +278,7 @@ done:
  * Also they depend on separate root hub suspend/resume.
  */
 
-static int ehci_pci_suspend(struct usb_hcd *hcd)
+static int ehci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
 {
 	struct ehci_hcd		*ehci = hcd_to_ehci(hcd);
 	unsigned long		flags;
@@ -291,7 +292,7 @@ static int ehci_pci_suspend(struct usb_hcd *hcd)
 	 * the root hub is either suspended or stopped.
 	 */
 	spin_lock_irqsave (&ehci->lock, flags);
-	ehci_prepare_ports_for_controller_suspend(ehci);
+	ehci_prepare_ports_for_controller_suspend(ehci, do_wakeup);
 	ehci_writel(ehci, 0, &ehci->regs->intr_enable);
 	(void)ehci_readl(ehci, &ehci->regs->intr_enable);
 
@@ -361,6 +362,22 @@ static int ehci_pci_resume(struct usb_hcd *hcd, bool hibernated)
 }
 #endif
 
+static int ehci_update_device(struct usb_hcd *hcd, struct usb_device *udev)
+{
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	int rc = 0;
+
+	if (!udev->parent) /* udev is root hub itself, impossible */
+		rc = -1;
+	/* we only support lpm device connected to root hub yet */
+	if (ehci->has_lpm && !udev->parent->parent) {
+		rc = ehci_lpm_set_da(ehci, udev->devnum, udev->portnum);
+		if (!rc)
+			rc = ehci_lpm_check(ehci, udev->portnum);
+	}
+	return rc;
+}
+
 static const struct hc_driver ehci_pci_hc_driver = {
 	.description =		hcd_name,
 	.product_desc =		"EHCI Host Controller",
@@ -407,6 +424,11 @@ static const struct hc_driver ehci_pci_hc_driver = {
 	.relinquish_port =	ehci_relinquish_port,
 	.port_handed_over =	ehci_port_handed_over,
 
+	/*
+	 * call back when device connected and addressed
+	 */
+	.update_device =	ehci_update_device,
+
 	.clear_tt_buffer_complete	= ehci_clear_tt_buffer_complete,
 };
 
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index 11a79c4..233c288 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -1126,8 +1126,7 @@ submit_async (
 #endif
 
 	spin_lock_irqsave (&ehci->lock, flags);
-	if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE,
-			       &ehci_to_hcd(ehci)->flags))) {
+	if (unlikely(!HCD_HW_ACCESSIBLE(ehci_to_hcd(ehci)))) {
 		rc = -ESHUTDOWN;
 		goto done;
 	}
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index 805ec63..a92526d 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -880,8 +880,7 @@ static int intr_submit (
 
 	spin_lock_irqsave (&ehci->lock, flags);
 
-	if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE,
-			&ehci_to_hcd(ehci)->flags))) {
+	if (unlikely(!HCD_HW_ACCESSIBLE(ehci_to_hcd(ehci)))) {
 		status = -ESHUTDOWN;
 		goto done_not_linked;
 	}
@@ -1075,15 +1074,6 @@ iso_stream_put(struct ehci_hcd *ehci, struct ehci_iso_stream *stream)
 		if (stream->ep)
 			stream->ep->hcpriv = NULL;
 
-		if (stream->rescheduled) {
-			ehci_info (ehci, "ep%d%s-iso rescheduled "
-				"%lu times in %lu seconds\n",
-				stream->bEndpointAddress, is_in ? "in" : "out",
-				stream->rescheduled,
-				((jiffies - stream->start)/HZ)
-				);
-		}
-
 		kfree(stream);
 	}
 }
@@ -1396,30 +1386,25 @@ iso_stream_schedule (
 	struct ehci_iso_stream	*stream
 )
 {
-	u32			now, next, start, period;
+	u32			now, next, start, period, span;
 	int			status;
 	unsigned		mod = ehci->periodic_size << 3;
 	struct ehci_iso_sched	*sched = urb->hcpriv;
-	struct pci_dev		*pdev;
 
-	if (sched->span > (mod - SCHEDULE_SLOP)) {
-		ehci_dbg (ehci, "iso request %p too long\n", urb);
-		status = -EFBIG;
-		goto fail;
+	period = urb->interval;
+	span = sched->span;
+	if (!stream->highspeed) {
+		period <<= 3;
+		span <<= 3;
 	}
 
-	if ((stream->depth + sched->span) > mod) {
-		ehci_dbg (ehci, "request %p would overflow (%d+%d>%d)\n",
-			urb, stream->depth, sched->span, mod);
+	if (span > mod - SCHEDULE_SLOP) {
+		ehci_dbg (ehci, "iso request %p too long\n", urb);
 		status = -EFBIG;
 		goto fail;
 	}
 
-	period = urb->interval;
-	if (!stream->highspeed)
-		period <<= 3;
-
-	now = ehci_readl(ehci, &ehci->regs->frame_index) % mod;
+	now = ehci_readl(ehci, &ehci->regs->frame_index) & (mod - 1);
 
 	/* Typical case: reuse current schedule, stream is still active.
 	 * Hopefully there are no gaps from the host falling behind
@@ -1427,34 +1412,35 @@ iso_stream_schedule (
 	 * slot in the schedule, implicitly assuming URB_ISO_ASAP.
 	 */
 	if (likely (!list_empty (&stream->td_list))) {
-		pdev = to_pci_dev(ehci_to_hcd(ehci)->self.controller);
-		start = stream->next_uframe;
+		u32	excess;
 
 		/* For high speed devices, allow scheduling within the
-		 * isochronous scheduling threshold.  For full speed devices,
-		 * don't. (Work around for Intel ICH9 bug.)
+		 * isochronous scheduling threshold.  For full speed devices
+		 * and Intel PCI-based controllers, don't (work around for
+		 * Intel ICH9 bug).
 		 */
-		if (!stream->highspeed &&
-				pdev->vendor == PCI_VENDOR_ID_INTEL)
+		if (!stream->highspeed && ehci->fs_i_thresh)
 			next = now + ehci->i_thresh;
 		else
 			next = now;
 
-		/* Fell behind (by up to twice the slop amount)? */
-		if (((start - next) & (mod - 1)) >=
-				mod - 2 * SCHEDULE_SLOP)
-			start += period * DIV_ROUND_UP(
-					(next - start) & (mod - 1),
-					period);
-
-		/* Tried to schedule too far into the future? */
-		if (unlikely(((start - now) & (mod - 1)) + sched->span
-					>= mod - 2 * SCHEDULE_SLOP)) {
+		/* Fell behind (by up to twice the slop amount)?
+		 * We decide based on the time of the last currently-scheduled
+		 * slot, not the time of the next available slot.
+		 */
+		excess = (stream->next_uframe - period - next) & (mod - 1);
+		if (excess >= mod - 2 * SCHEDULE_SLOP)
+			start = next + excess - mod + period *
+					DIV_ROUND_UP(mod - excess, period);
+		else
+			start = next + excess + period;
+		if (start - now >= mod) {
+			ehci_dbg(ehci, "request %p would overflow (%d+%d >= %d)\n",
+					urb, start - now - period, period,
+					mod);
 			status = -EFBIG;
 			goto fail;
 		}
-		stream->next_uframe = start;
-		goto ready;
 	}
 
 	/* need to schedule; when's the next (u)frame we could start?
@@ -1463,51 +1449,60 @@ iso_stream_schedule (
 	 * can also help high bandwidth if the dma and irq loads don't
 	 * jump until after the queue is primed.
 	 */
-	start = SCHEDULE_SLOP + (now & ~0x07);
-	start %= mod;
-	stream->next_uframe = start;
-
-	/* NOTE:  assumes URB_ISO_ASAP, to limit complexity/bugs */
-
-	/* find a uframe slot with enough bandwidth */
-	for (; start < (stream->next_uframe + period); start++) {
-		int		enough_space;
-
-		/* check schedule: enough space? */
-		if (stream->highspeed)
-			enough_space = itd_slot_ok (ehci, mod, start,
-					stream->usecs, period);
-		else {
-			if ((start % 8) >= 6)
-				continue;
-			enough_space = sitd_slot_ok (ehci, mod, stream,
-					start, sched, period);
+	else {
+		start = SCHEDULE_SLOP + (now & ~0x07);
+
+		/* NOTE:  assumes URB_ISO_ASAP, to limit complexity/bugs */
+
+		/* find a uframe slot with enough bandwidth */
+		next = start + period;
+		for (; start < next; start++) {
+
+			/* check schedule: enough space? */
+			if (stream->highspeed) {
+				if (itd_slot_ok(ehci, mod, start,
+						stream->usecs, period))
+					break;
+			} else {
+				if ((start % 8) >= 6)
+					continue;
+				if (sitd_slot_ok(ehci, mod, stream,
+						start, sched, period))
+					break;
+			}
 		}
 
-		/* schedule it here if there's enough bandwidth */
-		if (enough_space) {
-			stream->next_uframe = start % mod;
-			goto ready;
+		/* no room in the schedule */
+		if (start == next) {
+			ehci_dbg(ehci, "iso resched full %p (now %d max %d)\n",
+				urb, now, now + mod);
+			status = -ENOSPC;
+			goto fail;
 		}
 	}
 
-	/* no room in the schedule */
-	ehci_dbg (ehci, "iso %ssched full %p (now %d max %d)\n",
-		list_empty (&stream->td_list) ? "" : "re",
-		urb, now, now + mod);
-	status = -ENOSPC;
+	/* Tried to schedule too far into the future? */
+	if (unlikely(start - now + span - period
+				>= mod - 2 * SCHEDULE_SLOP)) {
+		ehci_dbg(ehci, "request %p would overflow (%d+%d >= %d)\n",
+				urb, start - now, span - period,
+				mod - 2 * SCHEDULE_SLOP);
+		status = -EFBIG;
+		goto fail;
+	}
 
-fail:
-	iso_sched_free (stream, sched);
-	urb->hcpriv = NULL;
-	return status;
+	stream->next_uframe = start & (mod - 1);
 
-ready:
 	/* report high speed start in uframes; full speed, in frames */
 	urb->start_frame = stream->next_uframe;
 	if (!stream->highspeed)
 		urb->start_frame >>= 3;
 	return 0;
+
+ fail:
+	iso_sched_free(stream, sched);
+	urb->hcpriv = NULL;
+	return status;
 }
 
 /*-------------------------------------------------------------------------*/
@@ -1602,7 +1597,7 @@ itd_link_urb (
 	struct ehci_iso_sched	*iso_sched = urb->hcpriv;
 	struct ehci_itd		*itd;
 
-	next_uframe = stream->next_uframe % mod;
+	next_uframe = stream->next_uframe & (mod - 1);
 
 	if (unlikely (list_empty(&stream->td_list))) {
 		ehci_to_hcd(ehci)->self.bandwidth_allocated
@@ -1613,7 +1608,6 @@ itd_link_urb (
 			(stream->bEndpointAddress & USB_DIR_IN) ? "in" : "out",
 			urb->interval,
 			next_uframe >> 3, next_uframe & 0x7);
-		stream->start = jiffies;
 	}
 	ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs++;
 
@@ -1639,14 +1633,13 @@ itd_link_urb (
 		itd_patch(ehci, itd, iso_sched, packet, uframe);
 
 		next_uframe += stream->interval;
-		stream->depth += stream->interval;
-		next_uframe %= mod;
+		next_uframe &= mod - 1;
 		packet++;
 
 		/* link completed itds into the schedule */
 		if (((next_uframe >> 3) != frame)
 				|| packet == urb->number_of_packets) {
-			itd_link (ehci, frame % ehci->periodic_size, itd);
+			itd_link(ehci, frame & (ehci->periodic_size - 1), itd);
 			itd = NULL;
 		}
 	}
@@ -1695,7 +1688,6 @@ itd_complete (
 
 		t = hc32_to_cpup(ehci, &itd->hw_transaction [uframe]);
 		itd->hw_transaction [uframe] = 0;
-		stream->depth -= stream->interval;
 
 		/* report transfer status */
 		if (unlikely (t & ISO_ERRS)) {
@@ -1815,8 +1807,7 @@ static int itd_submit (struct ehci_hcd *ehci, struct urb *urb,
 
 	/* schedule ... need to lock */
 	spin_lock_irqsave (&ehci->lock, flags);
-	if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE,
-			       &ehci_to_hcd(ehci)->flags))) {
+	if (unlikely(!HCD_HW_ACCESSIBLE(ehci_to_hcd(ehci)))) {
 		status = -ESHUTDOWN;
 		goto done_not_linked;
 	}
@@ -2024,9 +2015,8 @@ sitd_link_urb (
 			"sched devp %s ep%d%s-iso [%d] %dms/%04x\n",
 			urb->dev->devpath, stream->bEndpointAddress & 0x0f,
 			(stream->bEndpointAddress & USB_DIR_IN) ? "in" : "out",
-			(next_uframe >> 3) % ehci->periodic_size,
+			(next_uframe >> 3) & (ehci->periodic_size - 1),
 			stream->interval, hc32_to_cpu(ehci, stream->splits));
-		stream->start = jiffies;
 	}
 	ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs++;
 
@@ -2047,13 +2037,12 @@ sitd_link_urb (
 		sitd->urb = urb;
 
 		sitd_patch(ehci, stream, sitd, sched, packet);
-		sitd_link (ehci, (next_uframe >> 3) % ehci->periodic_size,
+		sitd_link(ehci, (next_uframe >> 3) & (ehci->periodic_size - 1),
 				sitd);
 
 		next_uframe += stream->interval << 3;
-		stream->depth += stream->interval << 3;
 	}
-	stream->next_uframe = next_uframe % mod;
+	stream->next_uframe = next_uframe & (mod - 1);
 
 	/* don't need that schedule data any more */
 	iso_sched_free (stream, sched);
@@ -2111,7 +2100,6 @@ sitd_complete (
 		desc->actual_length = desc->length - SITD_LENGTH(t);
 		urb->actual_length += desc->actual_length;
 	}
-	stream->depth -= stream->interval << 3;
 
 	/* handle completion now? */
 	if ((urb_index + 1) != urb->number_of_packets)
@@ -2201,8 +2189,7 @@ static int sitd_submit (struct ehci_hcd *ehci, struct urb *urb,
 
 	/* schedule ... need to lock */
 	spin_lock_irqsave (&ehci->lock, flags);
-	if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE,
-			       &ehci_to_hcd(ehci)->flags))) {
+	if (unlikely(!HCD_HW_ACCESSIBLE(ehci_to_hcd(ehci)))) {
 		status = -ESHUTDOWN;
 		goto done_not_linked;
 	}
@@ -2263,7 +2250,7 @@ scan_periodic (struct ehci_hcd *ehci)
 	now_uframe = ehci->next_uframe;
 	if (HC_IS_RUNNING(ehci_to_hcd(ehci)->state)) {
 		clock = ehci_readl(ehci, &ehci->regs->frame_index);
-		clock_frame = (clock >> 3) % ehci->periodic_size;
+		clock_frame = (clock >> 3) & (ehci->periodic_size - 1);
 	} else  {
 		clock = now_uframe + mod - 1;
 		clock_frame = -1;
@@ -2272,7 +2259,7 @@ scan_periodic (struct ehci_hcd *ehci)
 		free_cached_lists(ehci);
 		ehci->clock_frame = clock_frame;
 	}
-	clock %= mod;
+	clock &= mod - 1;
 	clock_frame = clock >> 3;
 
 	for (;;) {
@@ -2361,7 +2348,7 @@ restart:
 				 * frame is current.
 				 */
 				if (((frame == clock_frame) ||
-				     (((frame + 1) % ehci->periodic_size)
+				     (((frame + 1) & (ehci->periodic_size - 1))
 				      == clock_frame))
 				    && live
 				    && (q.sitd->hw_results &
@@ -2428,7 +2415,8 @@ restart:
 					|| ehci->periodic_sched == 0)
 				break;
 			ehci->next_uframe = now_uframe;
-			now = ehci_readl(ehci, &ehci->regs->frame_index) % mod;
+			now = ehci_readl(ehci, &ehci->regs->frame_index) &
+					(mod - 1);
 			if (now_uframe == now)
 				break;
 
@@ -2441,7 +2429,7 @@ restart:
 			}
 		} else {
 			now_uframe++;
-			now_uframe %= mod;
+			now_uframe &= mod - 1;
 		}
 	}
 }
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 650a687..bde823f 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -130,6 +130,7 @@ struct ehci_hcd {			/* one per controller */
 	unsigned		has_amcc_usb23:1;
 	unsigned		need_io_watchdog:1;
 	unsigned		broken_periodic:1;
+	unsigned		fs_i_thresh:1;	/* Intel iso scheduling */
 
 	/* required for usb32 quirk */
 	#define OHCI_CTRL_HCFS          (3 << 6)
@@ -140,7 +141,8 @@ struct ehci_hcd {			/* one per controller */
 	#define OHCI_HCCTRL_LEN         0x4
 	__hc32			*ohci_hcctrl_reg;
 	unsigned		has_hostpc:1;
-
+	unsigned		has_lpm:1;  /* support link power management */
+	unsigned		has_ppcd:1; /* support per-port change bits */
 	u8			sbrn;		/* packed release number */
 
 	/* irq statistics */
@@ -154,9 +156,6 @@ struct ehci_hcd {			/* one per controller */
 	/* debug files */
 #ifdef DEBUG
 	struct dentry		*debug_dir;
-	struct dentry		*debug_async;
-	struct dentry		*debug_periodic;
-	struct dentry		*debug_registers;
 #endif
 };
 
@@ -401,15 +400,12 @@ struct ehci_iso_stream {
 	u32			refcount;
 	u8			bEndpointAddress;
 	u8			highspeed;
-	u16			depth;		/* depth in uframes */
 	struct list_head	td_list;	/* queued itds/sitds */
 	struct list_head	free_list;	/* list of unused itds/sitds */
 	struct usb_device	*udev;
 	struct usb_host_endpoint *ep;
 
 	/* output of (re)scheduling */
-	unsigned long		start;		/* jiffies */
-	unsigned long		rescheduled;
 	int			next_uframe;
 	__hc32			splits;
 
@@ -538,11 +534,11 @@ struct ehci_fstn {
 
 /* Prepare the PORTSC wakeup flags during controller suspend/resume */
 
-#define ehci_prepare_ports_for_controller_suspend(ehci)		\
-		ehci_adjust_port_wakeup_flags(ehci, true);
+#define ehci_prepare_ports_for_controller_suspend(ehci, do_wakeup)	\
+		ehci_adjust_port_wakeup_flags(ehci, true, do_wakeup);
 
-#define ehci_prepare_ports_for_controller_resume(ehci)		\
-		ehci_adjust_port_wakeup_flags(ehci, false);
+#define ehci_prepare_ports_for_controller_resume(ehci)			\
+		ehci_adjust_port_wakeup_flags(ehci, false, false);
 
 /*-------------------------------------------------------------------------*/
 
diff --git a/drivers/usb/host/hwa-hc.c b/drivers/usb/host/hwa-hc.c
index 35742f8..9bfac65 100644
--- a/drivers/usb/host/hwa-hc.c
+++ b/drivers/usb/host/hwa-hc.c
@@ -159,7 +159,7 @@ static int hwahc_op_start(struct usb_hcd *usb_hcd)
 		goto error_set_cluster_id;
 
 	usb_hcd->uses_new_polling = 1;
-	usb_hcd->poll_rh = 1;
+	set_bit(HCD_FLAG_POLL_RH, &usb_hcd->flags);
 	usb_hcd->state = HC_STATE_RUNNING;
 	result = 0;
 out:
@@ -776,7 +776,7 @@ static int hwahc_probe(struct usb_interface *usb_iface,
 		goto error_alloc;
 	}
 	usb_hcd->wireless = 1;
-	usb_hcd->flags |= HCD_FLAG_SAW_IRQ;
+	set_bit(HCD_FLAG_SAW_IRQ, &usb_hcd->flags);
 	wusbhc = usb_hcd_to_wusbhc(usb_hcd);
 	hwahc = container_of(wusbhc, struct hwahc, wusbhc);
 	hwahc_init(hwahc);
diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c
index caf116c..d0abb9b 100644
--- a/drivers/usb/host/imx21-hcd.c
+++ b/drivers/usb/host/imx21-hcd.c
@@ -1521,7 +1521,7 @@ static int imx21_hc_reset(struct usb_hcd *hcd)
 			return -ETIMEDOUT;
 		}
 		spin_unlock_irq(&imx21->lock);
-		schedule_timeout(1);
+		schedule_timeout_uninterruptible(1);
 		spin_lock_irq(&imx21->lock);
 	}
 	spin_unlock_irqrestore(&imx21->lock, flags);
diff --git a/drivers/usb/host/isp1362.h b/drivers/usb/host/isp1362.h
index d995351..0f97820 100644
--- a/drivers/usb/host/isp1362.h
+++ b/drivers/usb/host/isp1362.h
@@ -8,29 +8,7 @@
 /*
  * Platform specific compile time options
  */
-#if defined(CONFIG_ARCH_KARO)
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/karo.h>
-
-#define USE_32BIT		1
-
-
-/* These options are mutually eclusive */
-#define USE_PLATFORM_DELAY	1
-#define USE_NDELAY		0
-/*
- * MAX_ROOT_PORTS: Number of downstream ports
- *
- * The chip has two USB ports, one of which can be configured as
- * an USB device port, so the value of this constant is implementation
- * specific.
- */
-#define MAX_ROOT_PORTS		2
-#define DUMMY_DELAY_ACCESS do {} while (0)
-
-/* insert platform specific definitions for other machines here */
-#elif defined(CONFIG_BLACKFIN)
+#if defined(CONFIG_BLACKFIN)
 
 #include <linux/io.h>
 #define USE_32BIT		0
diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
index dbcafa2..d1a3dfc 100644
--- a/drivers/usb/host/isp1760-hcd.c
+++ b/drivers/usb/host/isp1760-hcd.c
@@ -482,7 +482,6 @@ static int isp1760_run(struct usb_hcd *hcd)
 	u32 chipid;
 
 	hcd->uses_new_polling = 1;
-	hcd->poll_rh = 0;
 
 	hcd->state = HC_STATE_RUNNING;
 	isp1760_enable_interrupts(hcd);
@@ -1450,7 +1449,7 @@ static int isp1760_prepare_enqueue(struct isp1760_hcd *priv, struct urb *urb,
 	epnum = urb->ep->desc.bEndpointAddress;
 
 	spin_lock_irqsave(&priv->lock, flags);
-	if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &priv_to_hcd(priv)->flags)) {
+	if (!HCD_HW_ACCESSIBLE(priv_to_hcd(priv))) {
 		rc = -ESHUTDOWN;
 		goto done;
 	}
diff --git a/drivers/usb/host/ohci-dbg.c b/drivers/usb/host/ohci-dbg.c
index 8ad2441..36abd2b 100644
--- a/drivers/usb/host/ohci-dbg.c
+++ b/drivers/usb/host/ohci-dbg.c
@@ -645,7 +645,7 @@ static ssize_t fill_registers_buffer(struct debug_buffer *buf)
 		hcd->product_desc,
 		hcd_name);
 
-	if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
+	if (!HCD_HW_ACCESSIBLE(hcd)) {
 		size -= scnprintf (next, size,
 			"SUSPENDED (no register access)\n");
 		goto done;
@@ -687,7 +687,7 @@ static ssize_t fill_registers_buffer(struct debug_buffer *buf)
 	next += temp;
 
 	temp = scnprintf (next, size, "hub poll timer %s\n",
-			ohci_to_hcd(ohci)->poll_rh ? "ON" : "off");
+			HCD_POLL_RH(ohci_to_hcd(ohci)) ? "ON" : "off");
 	size -= temp;
 	next += temp;
 
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 3ceb097..15ae39d 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -212,7 +212,7 @@ static int ohci_urb_enqueue (
 	spin_lock_irqsave (&ohci->lock, flags);
 
 	/* don't submit to a dead HC */
-	if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
+	if (!HCD_HW_ACCESSIBLE(hcd)) {
 		retval = -ENODEV;
 		goto fail;
 	}
@@ -684,7 +684,7 @@ retry:
 	}
 
 	/* use rhsc irqs after khubd is fully initialized */
-	hcd->poll_rh = 1;
+	set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
 	hcd->uses_new_polling = 1;
 
 	/* start controller operations */
@@ -821,7 +821,7 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd)
 	else if (ints & OHCI_INTR_RD) {
 		ohci_vdbg(ohci, "resume detect\n");
 		ohci_writel(ohci, OHCI_INTR_RD, &regs->intrstatus);
-		hcd->poll_rh = 1;
+		set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
 		if (ohci->autostop) {
 			spin_lock (&ohci->lock);
 			ohci_rh_resume (ohci);
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index 65cac8c..cddcda9 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -284,7 +284,7 @@ static int ohci_bus_suspend (struct usb_hcd *hcd)
 
 	spin_lock_irq (&ohci->lock);
 
-	if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)))
+	if (unlikely(!HCD_HW_ACCESSIBLE(hcd)))
 		rc = -ESHUTDOWN;
 	else
 		rc = ohci_rh_suspend (ohci, 0);
@@ -302,7 +302,7 @@ static int ohci_bus_resume (struct usb_hcd *hcd)
 
 	spin_lock_irq (&ohci->lock);
 
-	if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)))
+	if (unlikely(!HCD_HW_ACCESSIBLE(hcd)))
 		rc = -ESHUTDOWN;
 	else
 		rc = ohci_rh_resume (ohci);
@@ -355,6 +355,11 @@ static void ohci_finish_controller_resume(struct usb_hcd *hcd)
 		ohci_readl(ohci, &ohci->regs->intrenable);
 		msleep(20);
 	}
+
+	/* Does the root hub have a port wakeup pending? */
+	if (ohci_readl(ohci, &ohci->regs->intrstatus) &
+			(OHCI_INTR_RD | OHCI_INTR_RHSC))
+		usb_hcd_resume_root_hub(hcd);
 }
 
 /* Carry out polling-, autostop-, and autoresume-related state changes */
@@ -364,7 +369,7 @@ static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
 	int	poll_rh = 1;
 	int	rhsc_enable;
 
-	/* Some broken controllers never turn off RHCS in the interrupt
+	/* Some broken controllers never turn off RHSC in the interrupt
 	 * status register.  For their sake we won't re-enable RHSC
 	 * interrupts if the interrupt bit is already active.
 	 */
@@ -489,7 +494,7 @@ ohci_hub_status_data (struct usb_hcd *hcd, char *buf)
 	unsigned long	flags;
 
 	spin_lock_irqsave (&ohci->lock, flags);
-	if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))
+	if (!HCD_HW_ACCESSIBLE(hcd))
 		goto done;
 
 	/* undocumented erratum seen on at least rev D */
@@ -533,8 +538,12 @@ ohci_hub_status_data (struct usb_hcd *hcd, char *buf)
 		}
 	}
 
-	hcd->poll_rh = ohci_root_hub_state_changes(ohci, changed,
-			any_connected, rhsc_status);
+	if (ohci_root_hub_state_changes(ohci, changed,
+			any_connected, rhsc_status))
+		set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+	else
+		clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+
 
 done:
 	spin_unlock_irqrestore (&ohci->lock, flags);
@@ -701,7 +710,7 @@ static int ohci_hub_control (
 	u32		temp;
 	int		retval = 0;
 
-	if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)))
+	if (unlikely(!HCD_HW_ACCESSIBLE(hcd)))
 		return -ESHUTDOWN;
 
 	switch (typeReq) {
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index b8a1148..6bdc8b2 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -392,7 +392,7 @@ static int __devinit ohci_pci_start (struct usb_hcd *hcd)
 
 #ifdef	CONFIG_PM
 
-static int ohci_pci_suspend(struct usb_hcd *hcd)
+static int ohci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
 {
 	struct ohci_hcd	*ohci = hcd_to_ohci (hcd);
 	unsigned long	flags;
diff --git a/drivers/usb/host/ohci-ssb.c b/drivers/usb/host/ohci-ssb.c
index 23fd6a8..48ee694 100644
--- a/drivers/usb/host/ohci-ssb.c
+++ b/drivers/usb/host/ohci-ssb.c
@@ -93,8 +93,11 @@ static void ssb_ohci_detach(struct ssb_device *dev)
 {
 	struct usb_hcd *hcd = ssb_get_drvdata(dev);
 
+	if (hcd->driver->shutdown)
+		hcd->driver->shutdown(hcd);
 	usb_remove_hcd(hcd);
 	iounmap(hcd->regs);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 	usb_put_hcd(hcd);
 	ssb_device_disable(dev, 0);
 }
@@ -106,10 +109,52 @@ static int ssb_ohci_attach(struct ssb_device *dev)
 	int err = -ENOMEM;
 	u32 tmp, flags = 0;
 
-	if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV)
-		flags |= SSB_OHCI_TMSLOW_HOSTMODE;
+	if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) ||
+	    dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32)))
+		return -EOPNOTSUPP;
 
-	ssb_device_enable(dev, flags);
+	if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) {
+		/* Put the device into host-mode. */
+		flags |= SSB_OHCI_TMSLOW_HOSTMODE;
+		ssb_device_enable(dev, flags);
+	} else if (dev->id.coreid == SSB_DEV_USB20_HOST) {
+		/*
+		 * USB 2.0 special considerations:
+		 *
+		 * In addition to the standard SSB reset sequence, the Host
+		 * Control Register must be programmed to bring the USB core
+		 * and various phy components out of reset.
+		 */
+		ssb_device_enable(dev, 0);
+		ssb_write32(dev, 0x200, 0x7ff);
+
+		/* Change Flush control reg */
+		tmp = ssb_read32(dev, 0x400);
+		tmp &= ~8;
+		ssb_write32(dev, 0x400, tmp);
+		tmp = ssb_read32(dev, 0x400);
+
+		/* Change Shim control reg */
+		tmp = ssb_read32(dev, 0x304);
+		tmp &= ~0x100;
+		ssb_write32(dev, 0x304, tmp);
+		tmp = ssb_read32(dev, 0x304);
+
+		udelay(1);
+
+		/* Work around for 5354 failures */
+		if (dev->id.revision == 2 && dev->bus->chip_id == 0x5354) {
+			/* Change syn01 reg */
+			tmp = 0x00fe00fe;
+			ssb_write32(dev, 0x894, tmp);
+
+			/* Change syn03 reg */
+			tmp = ssb_read32(dev, 0x89c);
+			tmp |= 0x1;
+			ssb_write32(dev, 0x89c, tmp);
+		}
+	} else
+		ssb_device_enable(dev, 0);
 
 	hcd = usb_create_hcd(&ssb_ohci_hc_driver, dev->dev,
 			dev_name(dev->dev));
@@ -200,6 +245,7 @@ static int ssb_ohci_resume(struct ssb_device *dev)
 static const struct ssb_device_id ssb_ohci_table[] = {
 	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV),
 	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV),
+	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV),
 	SSB_DEVTABLE_END
 };
 MODULE_DEVICE_TABLE(ssb, ssb_ohci_table);
diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c
index de9e1c3..8026dc8 100644
--- a/drivers/usb/host/oxu210hp-hcd.c
+++ b/drivers/usb/host/oxu210hp-hcd.c
@@ -1633,8 +1633,7 @@ static int submit_async(struct oxu_hcd	*oxu, struct urb *urb,
 #endif
 
 	spin_lock_irqsave(&oxu->lock, flags);
-	if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE,
-			       &oxu_to_hcd(oxu)->flags))) {
+	if (unlikely(!HCD_HW_ACCESSIBLE(oxu_to_hcd(oxu)))) {
 		rc = -ESHUTDOWN;
 		goto done;
 	}
@@ -2201,8 +2200,7 @@ static int intr_submit(struct oxu_hcd *oxu, struct urb *urb,
 
 	spin_lock_irqsave(&oxu->lock, flags);
 
-	if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE,
-			       &oxu_to_hcd(oxu)->flags))) {
+	if (unlikely(!HCD_HW_ACCESSIBLE(oxu_to_hcd(oxu)))) {
 		status = -ESHUTDOWN;
 		goto done;
 	}
@@ -2707,7 +2705,6 @@ static int oxu_run(struct usb_hcd *hcd)
 	u32 temp, hcc_params;
 
 	hcd->uses_new_polling = 1;
-	hcd->poll_rh = 0;
 
 	/* EHCI spec section 4.1 */
 	retval = ehci_reset(oxu);
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index bcf9f0e..990f06b 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -813,8 +813,11 @@ static int sl811h_urb_enqueue(
 #endif
 
 	/* avoid all allocations within spinlocks */
-	if (!hep->hcpriv)
+	if (!hep->hcpriv) {
 		ep = kzalloc(sizeof *ep, mem_flags);
+		if (ep == NULL)
+			return -ENOMEM;
+	}
 
 	spin_lock_irqsave(&sl811->lock, flags);
 
diff --git a/drivers/usb/host/uhci-debug.c b/drivers/usb/host/uhci-debug.c
index 98cf0b2..6e7fb5f 100644
--- a/drivers/usb/host/uhci-debug.c
+++ b/drivers/usb/host/uhci-debug.c
@@ -17,7 +17,6 @@
 
 #include "uhci-hcd.h"
 
-#define uhci_debug_operations (* (const struct file_operations *) NULL)
 static struct dentry *uhci_debugfs_root;
 
 #ifdef DEBUG
@@ -495,18 +494,16 @@ static int uhci_debug_open(struct inode *inode, struct file *file)
 {
 	struct uhci_hcd *uhci = inode->i_private;
 	struct uhci_debug *up;
-	int ret = -ENOMEM;
 	unsigned long flags;
 
-	lock_kernel();
 	up = kmalloc(sizeof(*up), GFP_KERNEL);
 	if (!up)
-		goto out;
+		return -ENOMEM;
 
 	up->data = kmalloc(MAX_OUTPUT, GFP_KERNEL);
 	if (!up->data) {
 		kfree(up);
-		goto out;
+		return -ENOMEM;
 	}
 
 	up->size = 0;
@@ -517,10 +514,7 @@ static int uhci_debug_open(struct inode *inode, struct file *file)
 
 	file->private_data = up;
 
-	ret = 0;
-out:
-	unlock_kernel();
-	return ret;
+	return 0;
 }
 
 static loff_t uhci_debug_lseek(struct file *file, loff_t off, int whence)
@@ -528,9 +522,9 @@ static loff_t uhci_debug_lseek(struct file *file, loff_t off, int whence)
 	struct uhci_debug *up;
 	loff_t new = -1;
 
-	lock_kernel();
 	up = file->private_data;
 
+	/* XXX: atomic 64bit seek access, but that needs to be fixed in the VFS */
 	switch (whence) {
 	case 0:
 		new = off;
@@ -539,11 +533,10 @@ static loff_t uhci_debug_lseek(struct file *file, loff_t off, int whence)
 		new = file->f_pos + off;
 		break;
 	}
-	if (new < 0 || new > up->size) {
-		unlock_kernel();
+
+	if (new < 0 || new > up->size)
 		return -EINVAL;
-	}
-	unlock_kernel();
+
 	return (file->f_pos = new);
 }
 
@@ -564,7 +557,6 @@ static int uhci_debug_release(struct inode *inode, struct file *file)
 	return 0;
 }
 
-#undef uhci_debug_operations
 static const struct file_operations uhci_debug_operations = {
 	.owner =	THIS_MODULE,
 	.open =		uhci_debug_open,
@@ -572,6 +564,7 @@ static const struct file_operations uhci_debug_operations = {
 	.read =		uhci_debug_read,
 	.release =	uhci_debug_release,
 };
+#define UHCI_DEBUG_OPS
 
 #endif	/* CONFIG_DEBUG_FS */
 
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index 6637e52..f52d04d 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -140,7 +140,7 @@ static void finish_reset(struct uhci_hcd *uhci)
 	uhci->rh_state = UHCI_RH_RESET;
 	uhci->is_stopped = UHCI_IS_STOPPED;
 	uhci_to_hcd(uhci)->state = HC_STATE_HALT;
-	uhci_to_hcd(uhci)->poll_rh = 0;
+	clear_bit(HCD_FLAG_POLL_RH, &uhci_to_hcd(uhci)->flags);
 
 	uhci->dead = 0;		/* Full reset resurrects the controller */
 }
@@ -176,6 +176,8 @@ static void check_and_reset_hc(struct uhci_hcd *uhci)
  */
 static void configure_hc(struct uhci_hcd *uhci)
 {
+	struct pci_dev *pdev = to_pci_dev(uhci_dev(uhci));
+
 	/* Set the frame length to the default: 1 ms exactly */
 	outb(USBSOF_DEFAULT, uhci->io_addr + USBSOF);
 
@@ -191,8 +193,11 @@ static void configure_hc(struct uhci_hcd *uhci)
 	mb();
 
 	/* Enable PIRQ */
-	pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP,
-			USBLEGSUP_DEFAULT);
+	pci_write_config_word(pdev, USBLEGSUP, USBLEGSUP_DEFAULT);
+
+	/* Disable platform-specific non-PME# wakeup */
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL)
+		pci_write_config_byte(pdev, USBRES_INTEL, 0);
 }
 
 
@@ -344,7 +349,10 @@ __acquires(uhci->lock)
 	/* If interrupts don't work and remote wakeup is enabled then
 	 * the suspended root hub needs to be polled.
 	 */
-	uhci_to_hcd(uhci)->poll_rh = (!int_enable && wakeup_enable);
+	if (!int_enable && wakeup_enable)
+		set_bit(HCD_FLAG_POLL_RH, &uhci_to_hcd(uhci)->flags);
+	else
+		clear_bit(HCD_FLAG_POLL_RH, &uhci_to_hcd(uhci)->flags);
 
 	uhci_scan_schedule(uhci);
 	uhci_fsbr_off(uhci);
@@ -363,7 +371,7 @@ static void start_rh(struct uhci_hcd *uhci)
 			uhci->io_addr + USBINTR);
 	mb();
 	uhci->rh_state = UHCI_RH_RUNNING;
-	uhci_to_hcd(uhci)->poll_rh = 1;
+	set_bit(HCD_FLAG_POLL_RH, &uhci_to_hcd(uhci)->flags);
 }
 
 static void wakeup_rh(struct uhci_hcd *uhci)
@@ -589,7 +597,7 @@ static int uhci_start(struct usb_hcd *hcd)
 	struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 	int retval = -EBUSY;
 	int i;
-	struct dentry *dentry;
+	struct dentry __maybe_unused *dentry;
 
 	hcd->uses_new_polling = 1;
 
@@ -599,18 +607,16 @@ static int uhci_start(struct usb_hcd *hcd)
 	INIT_LIST_HEAD(&uhci->idle_qh_list);
 	init_waitqueue_head(&uhci->waitqh);
 
-	if (DEBUG_CONFIGURED) {
-		dentry = debugfs_create_file(hcd->self.bus_name,
-				S_IFREG|S_IRUGO|S_IWUSR, uhci_debugfs_root,
-				uhci, &uhci_debug_operations);
-		if (!dentry) {
-			dev_err(uhci_dev(uhci), "couldn't create uhci "
-					"debugfs entry\n");
-			retval = -ENOMEM;
-			goto err_create_debug_entry;
-		}
-		uhci->dentry = dentry;
+#ifdef UHCI_DEBUG_OPS
+	dentry = debugfs_create_file(hcd->self.bus_name,
+			S_IFREG|S_IRUGO|S_IWUSR, uhci_debugfs_root,
+			uhci, &uhci_debug_operations);
+	if (!dentry) {
+		dev_err(uhci_dev(uhci), "couldn't create uhci debugfs entry\n");
+		return -ENOMEM;
 	}
+	uhci->dentry = dentry;
+#endif
 
 	uhci->frame = dma_alloc_coherent(uhci_dev(uhci),
 			UHCI_NUMFRAMES * sizeof(*uhci->frame),
@@ -691,7 +697,9 @@ static int uhci_start(struct usb_hcd *hcd)
 
 	configure_hc(uhci);
 	uhci->is_initialized = 1;
+	spin_lock_irq(&uhci->lock);
 	start_rh(uhci);
+	spin_unlock_irq(&uhci->lock);
 	return 0;
 
 /*
@@ -722,7 +730,6 @@ err_alloc_frame_cpu:
 err_alloc_frame:
 	debugfs_remove(uhci->dentry);
 
-err_create_debug_entry:
 	return retval;
 }
 
@@ -731,7 +738,7 @@ static void uhci_stop(struct usb_hcd *hcd)
 	struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 
 	spin_lock_irq(&uhci->lock);
-	if (test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) && !uhci->dead)
+	if (HCD_HW_ACCESSIBLE(hcd) && !uhci->dead)
 		uhci_hc_died(uhci);
 	uhci_scan_schedule(uhci);
 	spin_unlock_irq(&uhci->lock);
@@ -748,7 +755,7 @@ static int uhci_rh_suspend(struct usb_hcd *hcd)
 	int rc = 0;
 
 	spin_lock_irq(&uhci->lock);
-	if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))
+	if (!HCD_HW_ACCESSIBLE(hcd))
 		rc = -ESHUTDOWN;
 	else if (uhci->dead)
 		;		/* Dead controllers tell no tales */
@@ -775,7 +782,7 @@ static int uhci_rh_resume(struct usb_hcd *hcd)
 	int rc = 0;
 
 	spin_lock_irq(&uhci->lock);
-	if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))
+	if (!HCD_HW_ACCESSIBLE(hcd))
 		rc = -ESHUTDOWN;
 	else if (!uhci->dead)
 		wakeup_rh(uhci);
@@ -783,15 +790,16 @@ static int uhci_rh_resume(struct usb_hcd *hcd)
 	return rc;
 }
 
-static int uhci_pci_suspend(struct usb_hcd *hcd)
+static int uhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
 {
 	struct uhci_hcd *uhci = hcd_to_uhci(hcd);
+	struct pci_dev *pdev = to_pci_dev(uhci_dev(uhci));
 	int rc = 0;
 
 	dev_dbg(uhci_dev(uhci), "%s\n", __func__);
 
 	spin_lock_irq(&uhci->lock);
-	if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) || uhci->dead)
+	if (!HCD_HW_ACCESSIBLE(hcd) || uhci->dead)
 		goto done_okay;		/* Already suspended or dead */
 
 	if (uhci->rh_state > UHCI_RH_SUSPENDED) {
@@ -803,11 +811,15 @@ static int uhci_pci_suspend(struct usb_hcd *hcd)
 	/* All PCI host controllers are required to disable IRQ generation
 	 * at the source, so we must turn off PIRQ.
 	 */
-	pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP, 0);
-	mb();
-	hcd->poll_rh = 0;
-
-	/* FIXME: Enable non-PME# remote wakeup? */
+	pci_write_config_word(pdev, USBLEGSUP, 0);
+	clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+
+	/* Enable platform-specific non-PME# wakeup */
+	if (do_wakeup) {
+		if (pdev->vendor == PCI_VENDOR_ID_INTEL)
+			pci_write_config_byte(pdev, USBRES_INTEL,
+					USBPORT1EN | USBPORT2EN);
+	}
 
 done_okay:
 	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
@@ -826,7 +838,6 @@ static int uhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
 	 * even if the controller was dead.
 	 */
 	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-	mb();
 
 	spin_lock_irq(&uhci->lock);
 
@@ -834,8 +845,6 @@ static int uhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
 	if (hibernated)
 		uhci_hc_died(uhci);
 
-	/* FIXME: Disable non-PME# remote wakeup? */
-
 	/* The firmware or a boot kernel may have changed the controller
 	 * settings during a system wakeup.  Check it and reconfigure
 	 * to avoid problems.
@@ -845,22 +854,20 @@ static int uhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
 	/* If the controller was dead before, it's back alive now */
 	configure_hc(uhci);
 
-	if (uhci->rh_state == UHCI_RH_RESET) {
-
-		/* The controller had to be reset */
+	/* Tell the core if the controller had to be reset */
+	if (uhci->rh_state == UHCI_RH_RESET)
 		usb_root_hub_lost_power(hcd->self.root_hub);
-		suspend_rh(uhci, UHCI_RH_SUSPENDED);
-	}
 
 	spin_unlock_irq(&uhci->lock);
 
 	/* If interrupts don't work and remote wakeup is enabled then
 	 * the suspended root hub needs to be polled.
 	 */
-	if (!uhci->RD_enable && hcd->self.root_hub->do_remote_wakeup) {
-		hcd->poll_rh = 1;
-		usb_hcd_poll_rh_status(hcd);
-	}
+	if (!uhci->RD_enable && hcd->self.root_hub->do_remote_wakeup)
+		set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+
+	/* Does the root hub have a port wakeup pending? */
+	usb_hcd_poll_rh_status(hcd);
 	return 0;
 }
 #endif
diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h
index 26bd1b2..49bf279 100644
--- a/drivers/usb/host/uhci-hcd.h
+++ b/drivers/usb/host/uhci-hcd.h
@@ -67,12 +67,17 @@
 #define   USBPORTSC_RES3	0x4000	/* reserved, write zeroes */
 #define   USBPORTSC_RES4	0x8000	/* reserved, write zeroes */
 
-/* Legacy support register */
+/* PCI legacy support register */
 #define USBLEGSUP		0xc0
 #define   USBLEGSUP_DEFAULT	0x2000	/* only PIRQ enable set */
 #define   USBLEGSUP_RWC		0x8f00	/* the R/WC bits */
 #define   USBLEGSUP_RO		0x5040	/* R/O and reserved bits */
 
+/* PCI Intel-specific resume-enable register */
+#define USBRES_INTEL		0xc4
+#define   USBPORT1EN		0x01
+#define   USBPORT2EN		0x02
+
 #define UHCI_PTR_BITS		cpu_to_le32(0x000F)
 #define UHCI_PTR_TERM		cpu_to_le32(0x0001)
 #define UHCI_PTR_QH		cpu_to_le32(0x0002)
diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c
index 8270055..6d59c0f 100644
--- a/drivers/usb/host/uhci-hub.c
+++ b/drivers/usb/host/uhci-hub.c
@@ -190,7 +190,7 @@ static int uhci_hub_status_data(struct usb_hcd *hcd, char *buf)
 	spin_lock_irqsave(&uhci->lock, flags);
 
 	uhci_scan_schedule(uhci);
-	if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) || uhci->dead)
+	if (!HCD_HW_ACCESSIBLE(hcd) || uhci->dead)
 		goto done;
 	uhci_check_ports(uhci);
 
@@ -200,7 +200,7 @@ static int uhci_hub_status_data(struct usb_hcd *hcd, char *buf)
 	    case UHCI_RH_SUSPENDING:
 	    case UHCI_RH_SUSPENDED:
 		/* if port change, ask to be resumed */
-		if (status)
+		if (status || uhci->resuming_ports)
 			usb_hcd_resume_root_hub(hcd);
 		break;
 
@@ -246,7 +246,7 @@ static int uhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 	u16 wPortChange, wPortStatus;
 	unsigned long flags;
 
-	if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) || uhci->dead)
+	if (!HCD_HW_ACCESSIBLE(hcd) || uhci->dead)
 		return -ETIMEDOUT;
 
 	spin_lock_irqsave(&uhci->lock, flags);
diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c
index acd582c..d3ade40 100644
--- a/drivers/usb/host/uhci-q.c
+++ b/drivers/usb/host/uhci-q.c
@@ -565,7 +565,7 @@ static void uhci_unlink_qh(struct uhci_hcd *uhci, struct uhci_qh *qh)
 	qh->unlink_frame = uhci->frame_number;
 
 	/* Force an interrupt so we know when the QH is fully unlinked */
-	if (list_empty(&uhci->skel_unlink_qh->node))
+	if (list_empty(&uhci->skel_unlink_qh->node) || uhci->is_stopped)
 		uhci_set_next_interrupt(uhci);
 
 	/* Move the QH from its old list to the end of the unlinking list */
@@ -1667,7 +1667,7 @@ static int uhci_advance_check(struct uhci_hcd *uhci, struct uhci_qh *qh)
 			qh->advance_jiffies = jiffies;
 			goto done;
 		}
-		ret = 0;
+		ret = uhci->is_stopped;
 	}
 
 	/* The queue hasn't advanced; check for timeout */
diff --git a/drivers/usb/host/whci/hcd.c b/drivers/usb/host/whci/hcd.c
index e0d3401..72b6892 100644
--- a/drivers/usb/host/whci/hcd.c
+++ b/drivers/usb/host/whci/hcd.c
@@ -68,7 +68,7 @@ static int whc_start(struct usb_hcd *usb_hcd)
 	whc_write_wusbcmd(whc, WUSBCMD_RUN, WUSBCMD_RUN);
 
 	usb_hcd->uses_new_polling = 1;
-	usb_hcd->poll_rh = 1;
+	set_bit(HCD_FLAG_POLL_RH, &usb_hcd->flags);
 	usb_hcd->state = HC_STATE_RUNNING;
 
 out:
diff --git a/drivers/usb/host/whci/qset.c b/drivers/usb/host/whci/qset.c
index ab5a14f..dc0ab83 100644
--- a/drivers/usb/host/whci/qset.c
+++ b/drivers/usb/host/whci/qset.c
@@ -475,7 +475,7 @@ static int qset_add_urb_sg(struct whc *whc, struct whc_qset *qset, struct urb *u
 			    || (prev_end & (WHCI_PAGE_SIZE-1))
 			    || (dma_addr & (WHCI_PAGE_SIZE-1))
 			    || std->len + WHCI_PAGE_SIZE > QTD_MAX_XFER_SIZE) {
-				if (std->len % qset->max_packet != 0)
+				if (std && std->len % qset->max_packet != 0)
 					return -EINVAL;
 				std = qset_new_std(whc, qset, urb, mem_flags);
 				if (std == NULL) {
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 2eb658d..4e51343 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -391,49 +391,6 @@ struct xhci_ring *xhci_stream_id_to_ring(
 	return ep->stream_info->stream_rings[stream_id];
 }
 
-struct xhci_ring *xhci_triad_to_transfer_ring(struct xhci_hcd *xhci,
-		unsigned int slot_id, unsigned int ep_index,
-		unsigned int stream_id)
-{
-	struct xhci_virt_ep *ep;
-
-	ep = &xhci->devs[slot_id]->eps[ep_index];
-	/* Common case: no streams */
-	if (!(ep->ep_state & EP_HAS_STREAMS))
-		return ep->ring;
-
-	if (stream_id == 0) {
-		xhci_warn(xhci,
-				"WARN: Slot ID %u, ep index %u has streams, "
-				"but URB has no stream ID.\n",
-				slot_id, ep_index);
-		return NULL;
-	}
-
-	if (stream_id < ep->stream_info->num_streams)
-		return ep->stream_info->stream_rings[stream_id];
-
-	xhci_warn(xhci,
-			"WARN: Slot ID %u, ep index %u has "
-			"stream IDs 1 to %u allocated, "
-			"but stream ID %u is requested.\n",
-			slot_id, ep_index,
-			ep->stream_info->num_streams - 1,
-			stream_id);
-	return NULL;
-}
-
-/* Get the right ring for the given URB.
- * If the endpoint supports streams, boundary check the URB's stream ID.
- * If the endpoint doesn't support streams, return the singular endpoint ring.
- */
-struct xhci_ring *xhci_urb_to_transfer_ring(struct xhci_hcd *xhci,
-		struct urb *urb)
-{
-	return xhci_triad_to_transfer_ring(xhci, urb->dev->slot_id,
-		xhci_get_endpoint_index(&urb->ep->desc), urb->stream_id);
-}
-
 #ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
 static int xhci_test_radix_tree(struct xhci_hcd *xhci,
 		unsigned int num_streams,
@@ -1112,8 +1069,18 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
 	ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index);
 
 	/* Set up the endpoint ring */
-	virt_dev->eps[ep_index].new_ring =
-		xhci_ring_alloc(xhci, 1, true, mem_flags);
+	/*
+	 * Isochronous endpoint ring needs bigger size because one isoc URB
+	 * carries multiple packets and it will insert multiple tds to the
+	 * ring.
+	 * This should be replaced with dynamic ring resizing in the future.
+	 */
+	if (usb_endpoint_xfer_isoc(&ep->desc))
+		virt_dev->eps[ep_index].new_ring =
+			xhci_ring_alloc(xhci, 8, true, mem_flags);
+	else
+		virt_dev->eps[ep_index].new_ring =
+			xhci_ring_alloc(xhci, 1, true, mem_flags);
 	if (!virt_dev->eps[ep_index].new_ring) {
 		/* Attempt to use the ring cache */
 		if (virt_dev->num_rings_cached == 0)
@@ -1124,6 +1091,7 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
 		virt_dev->num_rings_cached--;
 		xhci_reinit_cached_ring(xhci, virt_dev->eps[ep_index].new_ring);
 	}
+	virt_dev->eps[ep_index].skip = false;
 	ep_ring = virt_dev->eps[ep_index].new_ring;
 	ep_ctx->deq = ep_ring->first_seg->dma | ep_ring->cycle_state;
 
@@ -1389,6 +1357,22 @@ struct xhci_command *xhci_alloc_command(struct xhci_hcd *xhci,
 	return command;
 }
 
+void xhci_urb_free_priv(struct xhci_hcd *xhci, struct urb_priv *urb_priv)
+{
+	int last;
+
+	if (!urb_priv)
+		return;
+
+	last = urb_priv->length - 1;
+	if (last >= 0) {
+		int	i;
+		for (i = 0; i <= last; i++)
+			kfree(urb_priv->td[i]);
+	}
+	kfree(urb_priv);
+}
+
 void xhci_free_command(struct xhci_hcd *xhci,
 		struct xhci_command *command)
 {
@@ -1588,7 +1572,7 @@ static int xhci_check_trb_in_td_math(struct xhci_hcd *xhci, gfp_t mem_flags)
 	unsigned int num_tests;
 	int i, ret;
 
-	num_tests = sizeof(simple_test_vector) / sizeof(simple_test_vector[0]);
+	num_tests = ARRAY_SIZE(simple_test_vector);
 	for (i = 0; i < num_tests; i++) {
 		ret = xhci_test_trb_in_td(xhci,
 				xhci->event_ring->first_seg,
@@ -1601,7 +1585,7 @@ static int xhci_check_trb_in_td_math(struct xhci_hcd *xhci, gfp_t mem_flags)
 			return ret;
 	}
 
-	num_tests = sizeof(complex_test_vector) / sizeof(complex_test_vector[0]);
+	num_tests = ARRAY_SIZE(complex_test_vector);
 	for (i = 0; i < num_tests; i++) {
 		ret = xhci_test_trb_in_td(xhci,
 				complex_test_vector[i].input_seg,
@@ -1617,6 +1601,29 @@ static int xhci_check_trb_in_td_math(struct xhci_hcd *xhci, gfp_t mem_flags)
 	return 0;
 }
 
+static void xhci_set_hc_event_deq(struct xhci_hcd *xhci)
+{
+	u64 temp;
+	dma_addr_t deq;
+
+	deq = xhci_trb_virt_to_dma(xhci->event_ring->deq_seg,
+			xhci->event_ring->dequeue);
+	if (deq == 0 && !in_interrupt())
+		xhci_warn(xhci, "WARN something wrong with SW event ring "
+				"dequeue ptr.\n");
+	/* Update HC event ring dequeue pointer */
+	temp = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
+	temp &= ERST_PTR_MASK;
+	/* Don't clear the EHB bit (which is RW1C) because
+	 * there might be more events to service.
+	 */
+	temp &= ~ERST_EHB;
+	xhci_dbg(xhci, "// Write event ring dequeue pointer, "
+			"preserving EHB bit\n");
+	xhci_write_64(xhci, ((u64) deq & (u64) ~ERST_PTR_MASK) | temp,
+			&xhci->ir_set->erst_dequeue);
+}
+
 
 int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 {
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 11482b6..f7efe02 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -53,6 +53,7 @@ static int xhci_pci_setup(struct usb_hcd *hcd)
 	struct xhci_hcd		*xhci = hcd_to_xhci(hcd);
 	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
 	int			retval;
+	u32			temp;
 
 	hcd->self.sg_tablesize = TRBS_PER_SEGMENT - 2;
 
@@ -93,6 +94,14 @@ static int xhci_pci_setup(struct usb_hcd *hcd)
 		return retval;
 	xhci_dbg(xhci, "Reset complete\n");
 
+	temp = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
+	if (HCC_64BIT_ADDR(temp)) {
+		xhci_dbg(xhci, "Enabling 64-bit DMA addresses.\n");
+		dma_set_mask(hcd->self.controller, DMA_BIT_MASK(64));
+	} else {
+		dma_set_mask(hcd->self.controller, DMA_BIT_MASK(32));
+	}
+
 	xhci_dbg(xhci, "Calling HCD init\n");
 	/* Initialize HCD and host controller data structures. */
 	retval = xhci_init(hcd);
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index bfc99a9..bc3f4f4 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -301,28 +301,6 @@ static int room_on_ring(struct xhci_hcd *xhci, struct xhci_ring *ring,
 	return 1;
 }
 
-void xhci_set_hc_event_deq(struct xhci_hcd *xhci)
-{
-	u64 temp;
-	dma_addr_t deq;
-
-	deq = xhci_trb_virt_to_dma(xhci->event_ring->deq_seg,
-			xhci->event_ring->dequeue);
-	if (deq == 0 && !in_interrupt())
-		xhci_warn(xhci, "WARN something wrong with SW event ring "
-				"dequeue ptr.\n");
-	/* Update HC event ring dequeue pointer */
-	temp = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
-	temp &= ERST_PTR_MASK;
-	/* Don't clear the EHB bit (which is RW1C) because
-	 * there might be more events to service.
-	 */
-	temp &= ~ERST_EHB;
-	xhci_dbg(xhci, "// Write event ring dequeue pointer, preserving EHB bit\n");
-	xhci_write_64(xhci, ((u64) deq & (u64) ~ERST_PTR_MASK) | temp,
-			&xhci->ir_set->erst_dequeue);
-}
-
 /* Ring the host controller doorbell after placing a command on the ring */
 void xhci_ring_cmd_db(struct xhci_hcd *xhci)
 {
@@ -359,11 +337,6 @@ static void ring_ep_doorbell(struct xhci_hcd *xhci,
 		field = xhci_readl(xhci, db_addr) & DB_MASK;
 		field |= EPI_TO_DB(ep_index) | STREAM_ID_TO_DB(stream_id);
 		xhci_writel(xhci, field, db_addr);
-		/* Flush PCI posted writes - FIXME Matthew Wilcox says this
-		 * isn't time-critical and we shouldn't make the CPU wait for
-		 * the flush.
-		 */
-		xhci_readl(xhci, db_addr);
 	}
 }
 
@@ -419,6 +392,50 @@ static struct xhci_segment *find_trb_seg(
 	return cur_seg;
 }
 
+
+static struct xhci_ring *xhci_triad_to_transfer_ring(struct xhci_hcd *xhci,
+		unsigned int slot_id, unsigned int ep_index,
+		unsigned int stream_id)
+{
+	struct xhci_virt_ep *ep;
+
+	ep = &xhci->devs[slot_id]->eps[ep_index];
+	/* Common case: no streams */
+	if (!(ep->ep_state & EP_HAS_STREAMS))
+		return ep->ring;
+
+	if (stream_id == 0) {
+		xhci_warn(xhci,
+				"WARN: Slot ID %u, ep index %u has streams, "
+				"but URB has no stream ID.\n",
+				slot_id, ep_index);
+		return NULL;
+	}
+
+	if (stream_id < ep->stream_info->num_streams)
+		return ep->stream_info->stream_rings[stream_id];
+
+	xhci_warn(xhci,
+			"WARN: Slot ID %u, ep index %u has "
+			"stream IDs 1 to %u allocated, "
+			"but stream ID %u is requested.\n",
+			slot_id, ep_index,
+			ep->stream_info->num_streams - 1,
+			stream_id);
+	return NULL;
+}
+
+/* Get the right ring for the given URB.
+ * If the endpoint supports streams, boundary check the URB's stream ID.
+ * If the endpoint doesn't support streams, return the singular endpoint ring.
+ */
+static struct xhci_ring *xhci_urb_to_transfer_ring(struct xhci_hcd *xhci,
+		struct urb *urb)
+{
+	return xhci_triad_to_transfer_ring(xhci, urb->dev->slot_id,
+		xhci_get_endpoint_index(&urb->ep->desc), urb->stream_id);
+}
+
 /*
  * Move the xHC's endpoint ring dequeue pointer past cur_td.
  * Record the new state of the xHC's endpoint ring dequeue segment,
@@ -578,16 +595,24 @@ static void xhci_giveback_urb_in_irq(struct xhci_hcd *xhci,
 		struct xhci_td *cur_td, int status, char *adjective)
 {
 	struct usb_hcd *hcd = xhci_to_hcd(xhci);
+	struct urb	*urb;
+	struct urb_priv	*urb_priv;
 
-	cur_td->urb->hcpriv = NULL;
-	usb_hcd_unlink_urb_from_ep(hcd, cur_td->urb);
-	xhci_dbg(xhci, "Giveback %s URB %p\n", adjective, cur_td->urb);
+	urb = cur_td->urb;
+	urb_priv = urb->hcpriv;
+	urb_priv->td_cnt++;
 
-	spin_unlock(&xhci->lock);
-	usb_hcd_giveback_urb(hcd, cur_td->urb, status);
-	kfree(cur_td);
-	spin_lock(&xhci->lock);
-	xhci_dbg(xhci, "%s URB given back\n", adjective);
+	/* Only giveback urb when this is the last td in urb */
+	if (urb_priv->td_cnt == urb_priv->length) {
+		usb_hcd_unlink_urb_from_ep(hcd, urb);
+		xhci_dbg(xhci, "Giveback %s URB %p\n", adjective, urb);
+
+		spin_unlock(&xhci->lock);
+		usb_hcd_giveback_urb(hcd, urb, status);
+		xhci_urb_free_priv(xhci, urb_priv);
+		spin_lock(&xhci->lock);
+		xhci_dbg(xhci, "%s URB given back\n", adjective);
+	}
 }
 
 /*
@@ -1132,7 +1157,6 @@ static void handle_port_status(struct xhci_hcd *xhci,
 
 	/* Update event ring dequeue pointer before dropping the lock */
 	inc_deq(xhci, xhci->event_ring, true);
-	xhci_set_hc_event_deq(xhci);
 
 	spin_unlock(&xhci->lock);
 	/* Pass this up to the core */
@@ -1258,6 +1282,421 @@ int xhci_is_vendor_info_code(struct xhci_hcd *xhci, unsigned int trb_comp_code)
 }
 
 /*
+ * Finish the td processing, remove the td from td list;
+ * Return 1 if the urb can be given back.
+ */
+static int finish_td(struct xhci_hcd *xhci, struct xhci_td *td,
+	union xhci_trb *event_trb, struct xhci_transfer_event *event,
+	struct xhci_virt_ep *ep, int *status, bool skip)
+{
+	struct xhci_virt_device *xdev;
+	struct xhci_ring *ep_ring;
+	unsigned int slot_id;
+	int ep_index;
+	struct urb *urb = NULL;
+	struct xhci_ep_ctx *ep_ctx;
+	int ret = 0;
+	struct urb_priv	*urb_priv;
+	u32 trb_comp_code;
+
+	slot_id = TRB_TO_SLOT_ID(event->flags);
+	xdev = xhci->devs[slot_id];
+	ep_index = TRB_TO_EP_ID(event->flags) - 1;
+	ep_ring = xhci_dma_to_transfer_ring(ep, event->buffer);
+	ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
+	trb_comp_code = GET_COMP_CODE(event->transfer_len);
+
+	if (skip)
+		goto td_cleanup;
+
+	if (trb_comp_code == COMP_STOP_INVAL ||
+			trb_comp_code == COMP_STOP) {
+		/* The Endpoint Stop Command completion will take care of any
+		 * stopped TDs.  A stopped TD may be restarted, so don't update
+		 * the ring dequeue pointer or take this TD off any lists yet.
+		 */
+		ep->stopped_td = td;
+		ep->stopped_trb = event_trb;
+		return 0;
+	} else {
+		if (trb_comp_code == COMP_STALL) {
+			/* The transfer is completed from the driver's
+			 * perspective, but we need to issue a set dequeue
+			 * command for this stalled endpoint to move the dequeue
+			 * pointer past the TD.  We can't do that here because
+			 * the halt condition must be cleared first.  Let the
+			 * USB class driver clear the stall later.
+			 */
+			ep->stopped_td = td;
+			ep->stopped_trb = event_trb;
+			ep->stopped_stream = ep_ring->stream_id;
+		} else if (xhci_requires_manual_halt_cleanup(xhci,
+					ep_ctx, trb_comp_code)) {
+			/* Other types of errors halt the endpoint, but the
+			 * class driver doesn't call usb_reset_endpoint() unless
+			 * the error is -EPIPE.  Clear the halted status in the
+			 * xHCI hardware manually.
+			 */
+			xhci_cleanup_halted_endpoint(xhci,
+					slot_id, ep_index, ep_ring->stream_id,
+					td, event_trb);
+		} else {
+			/* Update ring dequeue pointer */
+			while (ep_ring->dequeue != td->last_trb)
+				inc_deq(xhci, ep_ring, false);
+			inc_deq(xhci, ep_ring, false);
+		}
+
+td_cleanup:
+		/* Clean up the endpoint's TD list */
+		urb = td->urb;
+		urb_priv = urb->hcpriv;
+
+		/* Do one last check of the actual transfer length.
+		 * If the host controller said we transferred more data than
+		 * the buffer length, urb->actual_length will be a very big
+		 * number (since it's unsigned).  Play it safe and say we didn't
+		 * transfer anything.
+		 */
+		if (urb->actual_length > urb->transfer_buffer_length) {
+			xhci_warn(xhci, "URB transfer length is wrong, "
+					"xHC issue? req. len = %u, "
+					"act. len = %u\n",
+					urb->transfer_buffer_length,
+					urb->actual_length);
+			urb->actual_length = 0;
+			if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
+				*status = -EREMOTEIO;
+			else
+				*status = 0;
+		}
+		list_del(&td->td_list);
+		/* Was this TD slated to be cancelled but completed anyway? */
+		if (!list_empty(&td->cancelled_td_list))
+			list_del(&td->cancelled_td_list);
+
+		urb_priv->td_cnt++;
+		/* Giveback the urb when all the tds are completed */
+		if (urb_priv->td_cnt == urb_priv->length)
+			ret = 1;
+	}
+
+	return ret;
+}
+
+/*
+ * Process control tds, update urb status and actual_length.
+ */
+static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td,
+	union xhci_trb *event_trb, struct xhci_transfer_event *event,
+	struct xhci_virt_ep *ep, int *status)
+{
+	struct xhci_virt_device *xdev;
+	struct xhci_ring *ep_ring;
+	unsigned int slot_id;
+	int ep_index;
+	struct xhci_ep_ctx *ep_ctx;
+	u32 trb_comp_code;
+
+	slot_id = TRB_TO_SLOT_ID(event->flags);
+	xdev = xhci->devs[slot_id];
+	ep_index = TRB_TO_EP_ID(event->flags) - 1;
+	ep_ring = xhci_dma_to_transfer_ring(ep, event->buffer);
+	ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
+	trb_comp_code = GET_COMP_CODE(event->transfer_len);
+
+	xhci_debug_trb(xhci, xhci->event_ring->dequeue);
+	switch (trb_comp_code) {
+	case COMP_SUCCESS:
+		if (event_trb == ep_ring->dequeue) {
+			xhci_warn(xhci, "WARN: Success on ctrl setup TRB "
+					"without IOC set??\n");
+			*status = -ESHUTDOWN;
+		} else if (event_trb != td->last_trb) {
+			xhci_warn(xhci, "WARN: Success on ctrl data TRB "
+					"without IOC set??\n");
+			*status = -ESHUTDOWN;
+		} else {
+			xhci_dbg(xhci, "Successful control transfer!\n");
+			*status = 0;
+		}
+		break;
+	case COMP_SHORT_TX:
+		xhci_warn(xhci, "WARN: short transfer on control ep\n");
+		if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
+			*status = -EREMOTEIO;
+		else
+			*status = 0;
+		break;
+	default:
+		if (!xhci_requires_manual_halt_cleanup(xhci,
+					ep_ctx, trb_comp_code))
+			break;
+		xhci_dbg(xhci, "TRB error code %u, "
+				"halted endpoint index = %u\n",
+				trb_comp_code, ep_index);
+		/* else fall through */
+	case COMP_STALL:
+		/* Did we transfer part of the data (middle) phase? */
+		if (event_trb != ep_ring->dequeue &&
+				event_trb != td->last_trb)
+			td->urb->actual_length =
+				td->urb->transfer_buffer_length
+				- TRB_LEN(event->transfer_len);
+		else
+			td->urb->actual_length = 0;
+
+		xhci_cleanup_halted_endpoint(xhci,
+			slot_id, ep_index, 0, td, event_trb);
+		return finish_td(xhci, td, event_trb, event, ep, status, true);
+	}
+	/*
+	 * Did we transfer any data, despite the errors that might have
+	 * happened?  I.e. did we get past the setup stage?
+	 */
+	if (event_trb != ep_ring->dequeue) {
+		/* The event was for the status stage */
+		if (event_trb == td->last_trb) {
+			if (td->urb->actual_length != 0) {
+				/* Don't overwrite a previously set error code
+				 */
+				if ((*status == -EINPROGRESS || *status == 0) &&
+						(td->urb->transfer_flags
+						 & URB_SHORT_NOT_OK))
+					/* Did we already see a short data
+					 * stage? */
+					*status = -EREMOTEIO;
+			} else {
+				td->urb->actual_length =
+					td->urb->transfer_buffer_length;
+			}
+		} else {
+		/* Maybe the event was for the data stage? */
+			if (trb_comp_code != COMP_STOP_INVAL) {
+				/* We didn't stop on a link TRB in the middle */
+				td->urb->actual_length =
+					td->urb->transfer_buffer_length -
+					TRB_LEN(event->transfer_len);
+				xhci_dbg(xhci, "Waiting for status "
+						"stage event\n");
+				return 0;
+			}
+		}
+	}
+
+	return finish_td(xhci, td, event_trb, event, ep, status, false);
+}
+
+/*
+ * Process isochronous tds, update urb packet status and actual_length.
+ */
+static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td,
+	union xhci_trb *event_trb, struct xhci_transfer_event *event,
+	struct xhci_virt_ep *ep, int *status)
+{
+	struct xhci_ring *ep_ring;
+	struct urb_priv *urb_priv;
+	int idx;
+	int len = 0;
+	int skip_td = 0;
+	union xhci_trb *cur_trb;
+	struct xhci_segment *cur_seg;
+	u32 trb_comp_code;
+
+	ep_ring = xhci_dma_to_transfer_ring(ep, event->buffer);
+	trb_comp_code = GET_COMP_CODE(event->transfer_len);
+	urb_priv = td->urb->hcpriv;
+	idx = urb_priv->td_cnt;
+
+	if (ep->skip) {
+		/* The transfer is partly done */
+		*status = -EXDEV;
+		td->urb->iso_frame_desc[idx].status = -EXDEV;
+	} else {
+		/* handle completion code */
+		switch (trb_comp_code) {
+		case COMP_SUCCESS:
+			td->urb->iso_frame_desc[idx].status = 0;
+			xhci_dbg(xhci, "Successful isoc transfer!\n");
+			break;
+		case COMP_SHORT_TX:
+			if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
+				td->urb->iso_frame_desc[idx].status =
+					 -EREMOTEIO;
+			else
+				td->urb->iso_frame_desc[idx].status = 0;
+			break;
+		case COMP_BW_OVER:
+			td->urb->iso_frame_desc[idx].status = -ECOMM;
+			skip_td = 1;
+			break;
+		case COMP_BUFF_OVER:
+		case COMP_BABBLE:
+			td->urb->iso_frame_desc[idx].status = -EOVERFLOW;
+			skip_td = 1;
+			break;
+		case COMP_STALL:
+			td->urb->iso_frame_desc[idx].status = -EPROTO;
+			skip_td = 1;
+			break;
+		case COMP_STOP:
+		case COMP_STOP_INVAL:
+			break;
+		default:
+			td->urb->iso_frame_desc[idx].status = -1;
+			break;
+		}
+	}
+
+	/* calc actual length */
+	if (ep->skip) {
+		td->urb->iso_frame_desc[idx].actual_length = 0;
+		return finish_td(xhci, td, event_trb, event, ep, status, true);
+	}
+
+	if (trb_comp_code == COMP_SUCCESS || skip_td == 1) {
+		td->urb->iso_frame_desc[idx].actual_length =
+			td->urb->iso_frame_desc[idx].length;
+		td->urb->actual_length +=
+			td->urb->iso_frame_desc[idx].length;
+	} else {
+		for (cur_trb = ep_ring->dequeue,
+		     cur_seg = ep_ring->deq_seg; cur_trb != event_trb;
+		     next_trb(xhci, ep_ring, &cur_seg, &cur_trb)) {
+			if ((cur_trb->generic.field[3] &
+			 TRB_TYPE_BITMASK) != TRB_TYPE(TRB_TR_NOOP) &&
+			    (cur_trb->generic.field[3] &
+			 TRB_TYPE_BITMASK) != TRB_TYPE(TRB_LINK))
+				len +=
+				    TRB_LEN(cur_trb->generic.field[2]);
+		}
+		len += TRB_LEN(cur_trb->generic.field[2]) -
+			TRB_LEN(event->transfer_len);
+
+		if (trb_comp_code != COMP_STOP_INVAL) {
+			td->urb->iso_frame_desc[idx].actual_length = len;
+			td->urb->actual_length += len;
+		}
+	}
+
+	if ((idx == urb_priv->length - 1) && *status == -EINPROGRESS)
+		*status = 0;
+
+	return finish_td(xhci, td, event_trb, event, ep, status, false);
+}
+
+/*
+ * Process bulk and interrupt tds, update urb status and actual_length.
+ */
+static int process_bulk_intr_td(struct xhci_hcd *xhci, struct xhci_td *td,
+	union xhci_trb *event_trb, struct xhci_transfer_event *event,
+	struct xhci_virt_ep *ep, int *status)
+{
+	struct xhci_ring *ep_ring;
+	union xhci_trb *cur_trb;
+	struct xhci_segment *cur_seg;
+	u32 trb_comp_code;
+
+	ep_ring = xhci_dma_to_transfer_ring(ep, event->buffer);
+	trb_comp_code = GET_COMP_CODE(event->transfer_len);
+
+	switch (trb_comp_code) {
+	case COMP_SUCCESS:
+		/* Double check that the HW transferred everything. */
+		if (event_trb != td->last_trb) {
+			xhci_warn(xhci, "WARN Successful completion "
+					"on short TX\n");
+			if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
+				*status = -EREMOTEIO;
+			else
+				*status = 0;
+		} else {
+			if (usb_endpoint_xfer_bulk(&td->urb->ep->desc))
+				xhci_dbg(xhci, "Successful bulk "
+						"transfer!\n");
+			else
+				xhci_dbg(xhci, "Successful interrupt "
+						"transfer!\n");
+			*status = 0;
+		}
+		break;
+	case COMP_SHORT_TX:
+		if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
+			*status = -EREMOTEIO;
+		else
+			*status = 0;
+		break;
+	default:
+		/* Others already handled above */
+		break;
+	}
+	dev_dbg(&td->urb->dev->dev,
+			"ep %#x - asked for %d bytes, "
+			"%d bytes untransferred\n",
+			td->urb->ep->desc.bEndpointAddress,
+			td->urb->transfer_buffer_length,
+			TRB_LEN(event->transfer_len));
+	/* Fast path - was this the last TRB in the TD for this URB? */
+	if (event_trb == td->last_trb) {
+		if (TRB_LEN(event->transfer_len) != 0) {
+			td->urb->actual_length =
+				td->urb->transfer_buffer_length -
+				TRB_LEN(event->transfer_len);
+			if (td->urb->transfer_buffer_length <
+					td->urb->actual_length) {
+				xhci_warn(xhci, "HC gave bad length "
+						"of %d bytes left\n",
+						TRB_LEN(event->transfer_len));
+				td->urb->actual_length = 0;
+				if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
+					*status = -EREMOTEIO;
+				else
+					*status = 0;
+			}
+			/* Don't overwrite a previously set error code */
+			if (*status == -EINPROGRESS) {
+				if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
+					*status = -EREMOTEIO;
+				else
+					*status = 0;
+			}
+		} else {
+			td->urb->actual_length =
+				td->urb->transfer_buffer_length;
+			/* Ignore a short packet completion if the
+			 * untransferred length was zero.
+			 */
+			if (*status == -EREMOTEIO)
+				*status = 0;
+		}
+	} else {
+		/* Slow path - walk the list, starting from the dequeue
+		 * pointer, to get the actual length transferred.
+		 */
+		td->urb->actual_length = 0;
+		for (cur_trb = ep_ring->dequeue, cur_seg = ep_ring->deq_seg;
+				cur_trb != event_trb;
+				next_trb(xhci, ep_ring, &cur_seg, &cur_trb)) {
+			if ((cur_trb->generic.field[3] &
+			 TRB_TYPE_BITMASK) != TRB_TYPE(TRB_TR_NOOP) &&
+			    (cur_trb->generic.field[3] &
+			 TRB_TYPE_BITMASK) != TRB_TYPE(TRB_LINK))
+				td->urb->actual_length +=
+					TRB_LEN(cur_trb->generic.field[2]);
+		}
+		/* If the ring didn't stop on a Link or No-op TRB, add
+		 * in the actual bytes transferred from the Normal TRB
+		 */
+		if (trb_comp_code != COMP_STOP_INVAL)
+			td->urb->actual_length +=
+				TRB_LEN(cur_trb->generic.field[2]) -
+				TRB_LEN(event->transfer_len);
+	}
+
+	return finish_td(xhci, td, event_trb, event, ep, status, false);
+}
+
+/*
  * If this function returns an error condition, it means it got a Transfer
  * event with a corrupted Slot ID, Endpoint ID, or TRB DMA address.
  * At this point, the host controller is probably hosed and should be reset.
@@ -1276,10 +1715,11 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 	union xhci_trb *event_trb;
 	struct urb *urb = NULL;
 	int status = -EINPROGRESS;
+	struct urb_priv *urb_priv;
 	struct xhci_ep_ctx *ep_ctx;
 	u32 trb_comp_code;
+	int ret = 0;
 
-	xhci_dbg(xhci, "In %s\n", __func__);
 	slot_id = TRB_TO_SLOT_ID(event->flags);
 	xdev = xhci->devs[slot_id];
 	if (!xdev) {
@@ -1293,51 +1733,16 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 	ep = &xdev->eps[ep_index];
 	ep_ring = xhci_dma_to_transfer_ring(ep, event->buffer);
 	ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
-	if (!ep_ring || (ep_ctx->ep_info & EP_STATE_MASK) == EP_STATE_DISABLED) {
+	if (!ep_ring ||
+		(ep_ctx->ep_info & EP_STATE_MASK) == EP_STATE_DISABLED) {
 		xhci_err(xhci, "ERROR Transfer event for disabled endpoint "
 				"or incorrect stream ring\n");
 		return -ENODEV;
 	}
 
 	event_dma = event->buffer;
-	/* This TRB should be in the TD at the head of this ring's TD list */
-	xhci_dbg(xhci, "%s - checking for list empty\n", __func__);
-	if (list_empty(&ep_ring->td_list)) {
-		xhci_warn(xhci, "WARN Event TRB for slot %d ep %d with no TDs queued?\n",
-				TRB_TO_SLOT_ID(event->flags), ep_index);
-		xhci_dbg(xhci, "Event TRB with TRB type ID %u\n",
-				(unsigned int) (event->flags & TRB_TYPE_BITMASK)>>10);
-		xhci_print_trb_offsets(xhci, (union xhci_trb *) event);
-		urb = NULL;
-		goto cleanup;
-	}
-	xhci_dbg(xhci, "%s - getting list entry\n", __func__);
-	td = list_entry(ep_ring->td_list.next, struct xhci_td, td_list);
-
-	/* Is this a TRB in the currently executing TD? */
-	xhci_dbg(xhci, "%s - looking for TD\n", __func__);
-	event_seg = trb_in_td(ep_ring->deq_seg, ep_ring->dequeue,
-			td->last_trb, event_dma);
-	xhci_dbg(xhci, "%s - found event_seg = %p\n", __func__, event_seg);
-	if (!event_seg) {
-		/* HC is busted, give up! */
-		xhci_err(xhci, "ERROR Transfer event TRB DMA ptr not part of current TD\n");
-		return -ESHUTDOWN;
-	}
-	event_trb = &event_seg->trbs[(event_dma - event_seg->dma) / sizeof(*event_trb)];
-	xhci_dbg(xhci, "Event TRB with TRB type ID %u\n",
-			(unsigned int) (event->flags & TRB_TYPE_BITMASK)>>10);
-	xhci_dbg(xhci, "Offset 0x00 (buffer lo) = 0x%x\n",
-			lower_32_bits(event->buffer));
-	xhci_dbg(xhci, "Offset 0x04 (buffer hi) = 0x%x\n",
-			upper_32_bits(event->buffer));
-	xhci_dbg(xhci, "Offset 0x08 (transfer length) = 0x%x\n",
-			(unsigned int) event->transfer_len);
-	xhci_dbg(xhci, "Offset 0x0C (flags) = 0x%x\n",
-			(unsigned int) event->flags);
-
-	/* Look for common error cases */
 	trb_comp_code = GET_COMP_CODE(event->transfer_len);
+	/* Look for common error cases */
 	switch (trb_comp_code) {
 	/* Skip codes that require special handling depending on
 	 * transfer type
@@ -1373,278 +1778,156 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 		xhci_warn(xhci, "WARN: HC couldn't access mem fast enough\n");
 		status = -ENOSR;
 		break;
+	case COMP_BW_OVER:
+		xhci_warn(xhci, "WARN: bandwidth overrun event on endpoint\n");
+		break;
+	case COMP_BUFF_OVER:
+		xhci_warn(xhci, "WARN: buffer overrun event on endpoint\n");
+		break;
+	case COMP_UNDERRUN:
+		/*
+		 * When the Isoch ring is empty, the xHC will generate
+		 * a Ring Overrun Event for IN Isoch endpoint or Ring
+		 * Underrun Event for OUT Isoch endpoint.
+		 */
+		xhci_dbg(xhci, "underrun event on endpoint\n");
+		if (!list_empty(&ep_ring->td_list))
+			xhci_dbg(xhci, "Underrun Event for slot %d ep %d "
+					"still with TDs queued?\n",
+				TRB_TO_SLOT_ID(event->flags), ep_index);
+		goto cleanup;
+	case COMP_OVERRUN:
+		xhci_dbg(xhci, "overrun event on endpoint\n");
+		if (!list_empty(&ep_ring->td_list))
+			xhci_dbg(xhci, "Overrun Event for slot %d ep %d "
+					"still with TDs queued?\n",
+				TRB_TO_SLOT_ID(event->flags), ep_index);
+		goto cleanup;
+	case COMP_MISSED_INT:
+		/*
+		 * When encounter missed service error, one or more isoc tds
+		 * may be missed by xHC.
+		 * Set skip flag of the ep_ring; Complete the missed tds as
+		 * short transfer when process the ep_ring next time.
+		 */
+		ep->skip = true;
+		xhci_dbg(xhci, "Miss service interval error, set skip flag\n");
+		goto cleanup;
 	default:
 		if (xhci_is_vendor_info_code(xhci, trb_comp_code)) {
 			status = 0;
 			break;
 		}
-		xhci_warn(xhci, "ERROR Unknown event condition, HC probably busted\n");
-		urb = NULL;
+		xhci_warn(xhci, "ERROR Unknown event condition, HC probably "
+				"busted\n");
 		goto cleanup;
 	}
-	/* Now update the urb's actual_length and give back to the core */
-	/* Was this a control transfer? */
-	if (usb_endpoint_xfer_control(&td->urb->ep->desc)) {
-		xhci_debug_trb(xhci, xhci->event_ring->dequeue);
-		switch (trb_comp_code) {
-		case COMP_SUCCESS:
-			if (event_trb == ep_ring->dequeue) {
-				xhci_warn(xhci, "WARN: Success on ctrl setup TRB without IOC set??\n");
-				status = -ESHUTDOWN;
-			} else if (event_trb != td->last_trb) {
-				xhci_warn(xhci, "WARN: Success on ctrl data TRB without IOC set??\n");
-				status = -ESHUTDOWN;
-			} else {
-				xhci_dbg(xhci, "Successful control transfer!\n");
-				status = 0;
-			}
-			break;
-		case COMP_SHORT_TX:
-			xhci_warn(xhci, "WARN: short transfer on control ep\n");
-			if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
-				status = -EREMOTEIO;
-			else
-				status = 0;
-			break;
 
-		default:
-			if (!xhci_requires_manual_halt_cleanup(xhci,
-						ep_ctx, trb_comp_code))
-				break;
-			xhci_dbg(xhci, "TRB error code %u, "
-					"halted endpoint index = %u\n",
-					trb_comp_code, ep_index);
-			/* else fall through */
-		case COMP_STALL:
-			/* Did we transfer part of the data (middle) phase? */
-			if (event_trb != ep_ring->dequeue &&
-					event_trb != td->last_trb)
-				td->urb->actual_length =
-					td->urb->transfer_buffer_length
-					- TRB_LEN(event->transfer_len);
-			else
-				td->urb->actual_length = 0;
-
-			xhci_cleanup_halted_endpoint(xhci,
-					slot_id, ep_index, 0, td, event_trb);
-			goto td_cleanup;
-		}
-		/*
-		 * Did we transfer any data, despite the errors that might have
-		 * happened?  I.e. did we get past the setup stage?
+	do {
+		/* This TRB should be in the TD at the head of this ring's
+		 * TD list.
 		 */
-		if (event_trb != ep_ring->dequeue) {
-			/* The event was for the status stage */
-			if (event_trb == td->last_trb) {
-				if (td->urb->actual_length != 0) {
-					/* Don't overwrite a previously set error code */
-					if ((status == -EINPROGRESS ||
-								status == 0) &&
-							(td->urb->transfer_flags
-							 & URB_SHORT_NOT_OK))
-						/* Did we already see a short data stage? */
-						status = -EREMOTEIO;
-				} else {
-					td->urb->actual_length =
-						td->urb->transfer_buffer_length;
-				}
-			} else {
-			/* Maybe the event was for the data stage? */
-				if (trb_comp_code != COMP_STOP_INVAL) {
-					/* We didn't stop on a link TRB in the middle */
-					td->urb->actual_length =
-						td->urb->transfer_buffer_length -
-						TRB_LEN(event->transfer_len);
-					xhci_dbg(xhci, "Waiting for status stage event\n");
-					urb = NULL;
-					goto cleanup;
-				}
+		if (list_empty(&ep_ring->td_list)) {
+			xhci_warn(xhci, "WARN Event TRB for slot %d ep %d "
+					"with no TDs queued?\n",
+				  TRB_TO_SLOT_ID(event->flags), ep_index);
+			xhci_dbg(xhci, "Event TRB with TRB type ID %u\n",
+			  (unsigned int) (event->flags & TRB_TYPE_BITMASK)>>10);
+			xhci_print_trb_offsets(xhci, (union xhci_trb *) event);
+			if (ep->skip) {
+				ep->skip = false;
+				xhci_dbg(xhci, "td_list is empty while skip "
+						"flag set. Clear skip flag.\n");
 			}
+			ret = 0;
+			goto cleanup;
 		}
-	} else {
-		switch (trb_comp_code) {
-		case COMP_SUCCESS:
-			/* Double check that the HW transferred everything. */
-			if (event_trb != td->last_trb) {
-				xhci_warn(xhci, "WARN Successful completion "
-						"on short TX\n");
-				if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
-					status = -EREMOTEIO;
-				else
-					status = 0;
-			} else {
-				if (usb_endpoint_xfer_bulk(&td->urb->ep->desc))
-					xhci_dbg(xhci, "Successful bulk "
-							"transfer!\n");
-				else
-					xhci_dbg(xhci, "Successful interrupt "
-							"transfer!\n");
-				status = 0;
-			}
-			break;
-		case COMP_SHORT_TX:
-			if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
-				status = -EREMOTEIO;
-			else
-				status = 0;
-			break;
-		default:
-			/* Others already handled above */
-			break;
+
+		td = list_entry(ep_ring->td_list.next, struct xhci_td, td_list);
+		/* Is this a TRB in the currently executing TD? */
+		event_seg = trb_in_td(ep_ring->deq_seg, ep_ring->dequeue,
+				td->last_trb, event_dma);
+		if (event_seg && ep->skip) {
+			xhci_dbg(xhci, "Found td. Clear skip flag.\n");
+			ep->skip = false;
+		}
+		if (!event_seg &&
+		   (!ep->skip || !usb_endpoint_xfer_isoc(&td->urb->ep->desc))) {
+			/* HC is busted, give up! */
+			xhci_err(xhci, "ERROR Transfer event TRB DMA ptr not "
+					"part of current TD\n");
+			return -ESHUTDOWN;
 		}
-		dev_dbg(&td->urb->dev->dev,
-				"ep %#x - asked for %d bytes, "
-				"%d bytes untransferred\n",
-				td->urb->ep->desc.bEndpointAddress,
-				td->urb->transfer_buffer_length,
-				TRB_LEN(event->transfer_len));
-		/* Fast path - was this the last TRB in the TD for this URB? */
-		if (event_trb == td->last_trb) {
-			if (TRB_LEN(event->transfer_len) != 0) {
-				td->urb->actual_length =
-					td->urb->transfer_buffer_length -
-					TRB_LEN(event->transfer_len);
-				if (td->urb->transfer_buffer_length <
-						td->urb->actual_length) {
-					xhci_warn(xhci, "HC gave bad length "
-							"of %d bytes left\n",
-							TRB_LEN(event->transfer_len));
-					td->urb->actual_length = 0;
-					if (td->urb->transfer_flags &
-							URB_SHORT_NOT_OK)
-						status = -EREMOTEIO;
-					else
-						status = 0;
-				}
-				/* Don't overwrite a previously set error code */
-				if (status == -EINPROGRESS) {
-					if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
-						status = -EREMOTEIO;
-					else
-						status = 0;
-				}
-			} else {
-				td->urb->actual_length = td->urb->transfer_buffer_length;
-				/* Ignore a short packet completion if the
-				 * untransferred length was zero.
-				 */
-				if (status == -EREMOTEIO)
-					status = 0;
-			}
-		} else {
-			/* Slow path - walk the list, starting from the dequeue
-			 * pointer, to get the actual length transferred.
-			 */
-			union xhci_trb *cur_trb;
-			struct xhci_segment *cur_seg;
 
-			td->urb->actual_length = 0;
-			for (cur_trb = ep_ring->dequeue, cur_seg = ep_ring->deq_seg;
-					cur_trb != event_trb;
-					next_trb(xhci, ep_ring, &cur_seg, &cur_trb)) {
-				if ((cur_trb->generic.field[3] &
-				 TRB_TYPE_BITMASK) != TRB_TYPE(TRB_TR_NOOP) &&
-				    (cur_trb->generic.field[3] &
-				 TRB_TYPE_BITMASK) != TRB_TYPE(TRB_LINK))
-					td->urb->actual_length +=
-						TRB_LEN(cur_trb->generic.field[2]);
-			}
-			/* If the ring didn't stop on a Link or No-op TRB, add
-			 * in the actual bytes transferred from the Normal TRB
+		if (event_seg) {
+			event_trb = &event_seg->trbs[(event_dma -
+					 event_seg->dma) / sizeof(*event_trb)];
+			/*
+			 * No-op TRB should not trigger interrupts.
+			 * If event_trb is a no-op TRB, it means the
+			 * corresponding TD has been cancelled. Just ignore
+			 * the TD.
 			 */
-			if (trb_comp_code != COMP_STOP_INVAL)
-				td->urb->actual_length +=
-					TRB_LEN(cur_trb->generic.field[2]) -
-					TRB_LEN(event->transfer_len);
+			if ((event_trb->generic.field[3] & TRB_TYPE_BITMASK)
+					 == TRB_TYPE(TRB_TR_NOOP)) {
+				xhci_dbg(xhci, "event_trb is a no-op TRB. "
+						"Skip it\n");
+				goto cleanup;
+			}
 		}
-	}
-	if (trb_comp_code == COMP_STOP_INVAL ||
-			trb_comp_code == COMP_STOP) {
-		/* The Endpoint Stop Command completion will take care of any
-		 * stopped TDs.  A stopped TD may be restarted, so don't update
-		 * the ring dequeue pointer or take this TD off any lists yet.
+
+		/* Now update the urb's actual_length and give back to
+		 * the core
 		 */
-		ep->stopped_td = td;
-		ep->stopped_trb = event_trb;
-	} else {
-		if (trb_comp_code == COMP_STALL) {
-			/* The transfer is completed from the driver's
-			 * perspective, but we need to issue a set dequeue
-			 * command for this stalled endpoint to move the dequeue
-			 * pointer past the TD.  We can't do that here because
-			 * the halt condition must be cleared first.  Let the
-			 * USB class driver clear the stall later.
-			 */
-			ep->stopped_td = td;
-			ep->stopped_trb = event_trb;
-			ep->stopped_stream = ep_ring->stream_id;
-		} else if (xhci_requires_manual_halt_cleanup(xhci,
-					ep_ctx, trb_comp_code)) {
-			/* Other types of errors halt the endpoint, but the
-			 * class driver doesn't call usb_reset_endpoint() unless
-			 * the error is -EPIPE.  Clear the halted status in the
-			 * xHCI hardware manually.
-			 */
-			xhci_cleanup_halted_endpoint(xhci,
-					slot_id, ep_index, ep_ring->stream_id, td, event_trb);
-		} else {
-			/* Update ring dequeue pointer */
-			while (ep_ring->dequeue != td->last_trb)
-				inc_deq(xhci, ep_ring, false);
-			inc_deq(xhci, ep_ring, false);
-		}
+		if (usb_endpoint_xfer_control(&td->urb->ep->desc))
+			ret = process_ctrl_td(xhci, td, event_trb, event, ep,
+						 &status);
+		else if (usb_endpoint_xfer_isoc(&td->urb->ep->desc))
+			ret = process_isoc_td(xhci, td, event_trb, event, ep,
+						 &status);
+		else
+			ret = process_bulk_intr_td(xhci, td, event_trb, event,
+						 ep, &status);
 
-td_cleanup:
-		/* Clean up the endpoint's TD list */
-		urb = td->urb;
-		/* Do one last check of the actual transfer length.
-		 * If the host controller said we transferred more data than
-		 * the buffer length, urb->actual_length will be a very big
-		 * number (since it's unsigned).  Play it safe and say we didn't
-		 * transfer anything.
+cleanup:
+		/*
+		 * Do not update event ring dequeue pointer if ep->skip is set.
+		 * Will roll back to continue process missed tds.
 		 */
-		if (urb->actual_length > urb->transfer_buffer_length) {
-			xhci_warn(xhci, "URB transfer length is wrong, "
-					"xHC issue? req. len = %u, "
-					"act. len = %u\n",
-					urb->transfer_buffer_length,
-					urb->actual_length);
-			urb->actual_length = 0;
-			if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
-				status = -EREMOTEIO;
-			else
-				status = 0;
+		if (trb_comp_code == COMP_MISSED_INT || !ep->skip) {
+			inc_deq(xhci, xhci->event_ring, true);
 		}
-		list_del(&td->td_list);
-		/* Was this TD slated to be cancelled but completed anyway? */
-		if (!list_empty(&td->cancelled_td_list))
-			list_del(&td->cancelled_td_list);
 
-		/* Leave the TD around for the reset endpoint function to use
-		 * (but only if it's not a control endpoint, since we already
-		 * queued the Set TR dequeue pointer command for stalled
-		 * control endpoints).
-		 */
-		if (usb_endpoint_xfer_control(&urb->ep->desc) ||
-			(trb_comp_code != COMP_STALL &&
-				trb_comp_code != COMP_BABBLE)) {
-			kfree(td);
+		if (ret) {
+			urb = td->urb;
+			urb_priv = urb->hcpriv;
+			/* Leave the TD around for the reset endpoint function
+			 * to use(but only if it's not a control endpoint,
+			 * since we already queued the Set TR dequeue pointer
+			 * command for stalled control endpoints).
+			 */
+			if (usb_endpoint_xfer_control(&urb->ep->desc) ||
+				(trb_comp_code != COMP_STALL &&
+					trb_comp_code != COMP_BABBLE))
+				xhci_urb_free_priv(xhci, urb_priv);
+
+			usb_hcd_unlink_urb_from_ep(xhci_to_hcd(xhci), urb);
+			xhci_dbg(xhci, "Giveback URB %p, len = %d, "
+					"status = %d\n",
+					urb, urb->actual_length, status);
+			spin_unlock(&xhci->lock);
+			usb_hcd_giveback_urb(xhci_to_hcd(xhci), urb, status);
+			spin_lock(&xhci->lock);
 		}
-		urb->hcpriv = NULL;
-	}
-cleanup:
-	inc_deq(xhci, xhci->event_ring, true);
-	xhci_set_hc_event_deq(xhci);
 
-	/* FIXME for multi-TD URBs (who have buffers bigger than 64MB) */
-	if (urb) {
-		usb_hcd_unlink_urb_from_ep(xhci_to_hcd(xhci), urb);
-		xhci_dbg(xhci, "Giveback URB %p, len = %d, status = %d\n",
-				urb, urb->actual_length, status);
-		spin_unlock(&xhci->lock);
-		usb_hcd_giveback_urb(xhci_to_hcd(xhci), urb, status);
-		spin_lock(&xhci->lock);
-	}
+	/*
+	 * If ep->skip is set, it means there are missed tds on the
+	 * endpoint ring need to take care of.
+	 * Process them as short transfer until reach the td pointed by
+	 * the event.
+	 */
+	} while (ep->skip && trb_comp_code != COMP_MISSED_INT);
+
 	return 0;
 }
 
@@ -1652,7 +1935,7 @@ cleanup:
  * This function handles all OS-owned events on the event ring.  It may drop
  * xhci->lock between event processing (e.g. to pass up port status changes).
  */
-void xhci_handle_event(struct xhci_hcd *xhci)
+static void xhci_handle_event(struct xhci_hcd *xhci)
 {
 	union xhci_trb *event;
 	int update_ptrs = 1;
@@ -1710,15 +1993,130 @@ void xhci_handle_event(struct xhci_hcd *xhci)
 		return;
 	}
 
-	if (update_ptrs) {
-		/* Update SW and HC event ring dequeue pointer */
+	if (update_ptrs)
+		/* Update SW event ring dequeue pointer */
 		inc_deq(xhci, xhci->event_ring, true);
-		xhci_set_hc_event_deq(xhci);
-	}
+
 	/* Are there more items on the event ring? */
 	xhci_handle_event(xhci);
 }
 
+/*
+ * xHCI spec says we can get an interrupt, and if the HC has an error condition,
+ * we might get bad data out of the event ring.  Section 4.10.2.7 has a list of
+ * indicators of an event TRB error, but we check the status *first* to be safe.
+ */
+irqreturn_t xhci_irq(struct usb_hcd *hcd)
+{
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	u32 status;
+	union xhci_trb *trb;
+	u64 temp_64;
+	union xhci_trb *event_ring_deq;
+	dma_addr_t deq;
+
+	spin_lock(&xhci->lock);
+	trb = xhci->event_ring->dequeue;
+	/* Check if the xHC generated the interrupt, or the irq is shared */
+	status = xhci_readl(xhci, &xhci->op_regs->status);
+	if (status == 0xffffffff)
+		goto hw_died;
+
+	if (!(status & STS_EINT)) {
+		spin_unlock(&xhci->lock);
+		xhci_warn(xhci, "Spurious interrupt.\n");
+		return IRQ_NONE;
+	}
+	xhci_dbg(xhci, "op reg status = %08x\n", status);
+	xhci_dbg(xhci, "Event ring dequeue ptr:\n");
+	xhci_dbg(xhci, "@%llx %08x %08x %08x %08x\n",
+			(unsigned long long)
+			xhci_trb_virt_to_dma(xhci->event_ring->deq_seg, trb),
+			lower_32_bits(trb->link.segment_ptr),
+			upper_32_bits(trb->link.segment_ptr),
+			(unsigned int) trb->link.intr_target,
+			(unsigned int) trb->link.control);
+
+	if (status & STS_FATAL) {
+		xhci_warn(xhci, "WARNING: Host System Error\n");
+		xhci_halt(xhci);
+hw_died:
+		xhci_to_hcd(xhci)->state = HC_STATE_HALT;
+		spin_unlock(&xhci->lock);
+		return -ESHUTDOWN;
+	}
+
+	/*
+	 * Clear the op reg interrupt status first,
+	 * so we can receive interrupts from other MSI-X interrupters.
+	 * Write 1 to clear the interrupt status.
+	 */
+	status |= STS_EINT;
+	xhci_writel(xhci, status, &xhci->op_regs->status);
+	/* FIXME when MSI-X is supported and there are multiple vectors */
+	/* Clear the MSI-X event interrupt status */
+
+	if (hcd->irq != -1) {
+		u32 irq_pending;
+		/* Acknowledge the PCI interrupt */
+		irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending);
+		irq_pending |= 0x3;
+		xhci_writel(xhci, irq_pending, &xhci->ir_set->irq_pending);
+	}
+
+	if (xhci->xhc_state & XHCI_STATE_DYING) {
+		xhci_dbg(xhci, "xHCI dying, ignoring interrupt. "
+				"Shouldn't IRQs be disabled?\n");
+		/* Clear the event handler busy flag (RW1C);
+		 * the event ring should be empty.
+		 */
+		temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
+		xhci_write_64(xhci, temp_64 | ERST_EHB,
+				&xhci->ir_set->erst_dequeue);
+		spin_unlock(&xhci->lock);
+
+		return IRQ_HANDLED;
+	}
+
+	event_ring_deq = xhci->event_ring->dequeue;
+	/* FIXME this should be a delayed service routine
+	 * that clears the EHB.
+	 */
+	xhci_handle_event(xhci);
+
+	temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
+	/* If necessary, update the HW's version of the event ring deq ptr. */
+	if (event_ring_deq != xhci->event_ring->dequeue) {
+		deq = xhci_trb_virt_to_dma(xhci->event_ring->deq_seg,
+				xhci->event_ring->dequeue);
+		if (deq == 0)
+			xhci_warn(xhci, "WARN something wrong with SW event "
+					"ring dequeue ptr.\n");
+		/* Update HC event ring dequeue pointer */
+		temp_64 &= ERST_PTR_MASK;
+		temp_64 |= ((u64) deq & (u64) ~ERST_PTR_MASK);
+	}
+
+	/* Clear the event handler busy flag (RW1C); event ring is empty. */
+	temp_64 |= ERST_EHB;
+	xhci_write_64(xhci, temp_64, &xhci->ir_set->erst_dequeue);
+
+	spin_unlock(&xhci->lock);
+
+	return IRQ_HANDLED;
+}
+
+irqreturn_t xhci_msi_irq(int irq, struct usb_hcd *hcd)
+{
+	irqreturn_t ret;
+
+	set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
+
+	ret = xhci_irq(hcd);
+
+	return ret;
+}
+
 /****		Endpoint Ring Operations	****/
 
 /*
@@ -1827,10 +2225,12 @@ static int prepare_transfer(struct xhci_hcd *xhci,
 		unsigned int stream_id,
 		unsigned int num_trbs,
 		struct urb *urb,
-		struct xhci_td **td,
+		unsigned int td_index,
 		gfp_t mem_flags)
 {
 	int ret;
+	struct urb_priv *urb_priv;
+	struct xhci_td	*td;
 	struct xhci_ring *ep_ring;
 	struct xhci_ep_ctx *ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
 
@@ -1846,24 +2246,29 @@ static int prepare_transfer(struct xhci_hcd *xhci,
 			num_trbs, mem_flags);
 	if (ret)
 		return ret;
-	*td = kzalloc(sizeof(struct xhci_td), mem_flags);
-	if (!*td)
-		return -ENOMEM;
-	INIT_LIST_HEAD(&(*td)->td_list);
-	INIT_LIST_HEAD(&(*td)->cancelled_td_list);
 
-	ret = usb_hcd_link_urb_to_ep(xhci_to_hcd(xhci), urb);
-	if (unlikely(ret)) {
-		kfree(*td);
-		return ret;
+	urb_priv = urb->hcpriv;
+	td = urb_priv->td[td_index];
+
+	INIT_LIST_HEAD(&td->td_list);
+	INIT_LIST_HEAD(&td->cancelled_td_list);
+
+	if (td_index == 0) {
+		ret = usb_hcd_link_urb_to_ep(xhci_to_hcd(xhci), urb);
+		if (unlikely(ret)) {
+			xhci_urb_free_priv(xhci, urb_priv);
+			urb->hcpriv = NULL;
+			return ret;
+		}
 	}
 
-	(*td)->urb = urb;
-	urb->hcpriv = (void *) (*td);
+	td->urb = urb;
 	/* Add this TD to the tail of the endpoint ring's TD list */
-	list_add_tail(&(*td)->td_list, &ep_ring->td_list);
-	(*td)->start_seg = ep_ring->enq_seg;
-	(*td)->first_trb = ep_ring->enqueue;
+	list_add_tail(&td->td_list, &ep_ring->td_list);
+	td->start_seg = ep_ring->enq_seg;
+	td->first_trb = ep_ring->enqueue;
+
+	urb_priv->td[td_index] = td;
 
 	return 0;
 }
@@ -2002,6 +2407,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 {
 	struct xhci_ring *ep_ring;
 	unsigned int num_trbs;
+	struct urb_priv *urb_priv;
 	struct xhci_td *td;
 	struct scatterlist *sg;
 	int num_sgs;
@@ -2022,9 +2428,13 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 
 	trb_buff_len = prepare_transfer(xhci, xhci->devs[slot_id],
 			ep_index, urb->stream_id,
-			num_trbs, urb, &td, mem_flags);
+			num_trbs, urb, 0, mem_flags);
 	if (trb_buff_len < 0)
 		return trb_buff_len;
+
+	urb_priv = urb->hcpriv;
+	td = urb_priv->td[0];
+
 	/*
 	 * Don't give the first TRB to the hardware (by toggling the cycle bit)
 	 * until we've finished creating all the other TRBs.  The ring's cycle
@@ -2145,6 +2555,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 		struct urb *urb, int slot_id, unsigned int ep_index)
 {
 	struct xhci_ring *ep_ring;
+	struct urb_priv *urb_priv;
 	struct xhci_td *td;
 	int num_trbs;
 	struct xhci_generic_trb *start_trb;
@@ -2190,10 +2601,13 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 
 	ret = prepare_transfer(xhci, xhci->devs[slot_id],
 			ep_index, urb->stream_id,
-			num_trbs, urb, &td, mem_flags);
+			num_trbs, urb, 0, mem_flags);
 	if (ret < 0)
 		return ret;
 
+	urb_priv = urb->hcpriv;
+	td = urb_priv->td[0];
+
 	/*
 	 * Don't give the first TRB to the hardware (by toggling the cycle bit)
 	 * until we've finished creating all the other TRBs.  The ring's cycle
@@ -2279,6 +2693,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 	struct xhci_generic_trb *start_trb;
 	int start_cycle;
 	u32 field, length_field;
+	struct urb_priv *urb_priv;
 	struct xhci_td *td;
 
 	ep_ring = xhci_urb_to_transfer_ring(xhci, urb);
@@ -2306,10 +2721,13 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 		num_trbs++;
 	ret = prepare_transfer(xhci, xhci->devs[slot_id],
 			ep_index, urb->stream_id,
-			num_trbs, urb, &td, mem_flags);
+			num_trbs, urb, 0, mem_flags);
 	if (ret < 0)
 		return ret;
 
+	urb_priv = urb->hcpriv;
+	td = urb_priv->td[0];
+
 	/*
 	 * Don't give the first TRB to the hardware (by toggling the cycle bit)
 	 * until we've finished creating all the other TRBs.  The ring's cycle
@@ -2366,6 +2784,224 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 	return 0;
 }
 
+static int count_isoc_trbs_needed(struct xhci_hcd *xhci,
+		struct urb *urb, int i)
+{
+	int num_trbs = 0;
+	u64 addr, td_len, running_total;
+
+	addr = (u64) (urb->transfer_dma + urb->iso_frame_desc[i].offset);
+	td_len = urb->iso_frame_desc[i].length;
+
+	running_total = TRB_MAX_BUFF_SIZE -
+			(addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1));
+	if (running_total != 0)
+		num_trbs++;
+
+	while (running_total < td_len) {
+		num_trbs++;
+		running_total += TRB_MAX_BUFF_SIZE;
+	}
+
+	return num_trbs;
+}
+
+/* This is for isoc transfer */
+static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+		struct urb *urb, int slot_id, unsigned int ep_index)
+{
+	struct xhci_ring *ep_ring;
+	struct urb_priv *urb_priv;
+	struct xhci_td *td;
+	int num_tds, trbs_per_td;
+	struct xhci_generic_trb *start_trb;
+	bool first_trb;
+	int start_cycle;
+	u32 field, length_field;
+	int running_total, trb_buff_len, td_len, td_remain_len, ret;
+	u64 start_addr, addr;
+	int i, j;
+
+	ep_ring = xhci->devs[slot_id]->eps[ep_index].ring;
+
+	num_tds = urb->number_of_packets;
+	if (num_tds < 1) {
+		xhci_dbg(xhci, "Isoc URB with zero packets?\n");
+		return -EINVAL;
+	}
+
+	if (!in_interrupt())
+		dev_dbg(&urb->dev->dev, "ep %#x - urb len = %#x (%d),"
+				" addr = %#llx, num_tds = %d\n",
+				urb->ep->desc.bEndpointAddress,
+				urb->transfer_buffer_length,
+				urb->transfer_buffer_length,
+				(unsigned long long)urb->transfer_dma,
+				num_tds);
+
+	start_addr = (u64) urb->transfer_dma;
+	start_trb = &ep_ring->enqueue->generic;
+	start_cycle = ep_ring->cycle_state;
+
+	/* Queue the first TRB, even if it's zero-length */
+	for (i = 0; i < num_tds; i++) {
+		first_trb = true;
+
+		running_total = 0;
+		addr = start_addr + urb->iso_frame_desc[i].offset;
+		td_len = urb->iso_frame_desc[i].length;
+		td_remain_len = td_len;
+
+		trbs_per_td = count_isoc_trbs_needed(xhci, urb, i);
+
+		ret = prepare_transfer(xhci, xhci->devs[slot_id], ep_index,
+				urb->stream_id, trbs_per_td, urb, i, mem_flags);
+		if (ret < 0)
+			return ret;
+
+		urb_priv = urb->hcpriv;
+		td = urb_priv->td[i];
+
+		for (j = 0; j < trbs_per_td; j++) {
+			u32 remainder = 0;
+			field = 0;
+
+			if (first_trb) {
+				/* Queue the isoc TRB */
+				field |= TRB_TYPE(TRB_ISOC);
+				/* Assume URB_ISO_ASAP is set */
+				field |= TRB_SIA;
+				if (i > 0)
+					field |= ep_ring->cycle_state;
+				first_trb = false;
+			} else {
+				/* Queue other normal TRBs */
+				field |= TRB_TYPE(TRB_NORMAL);
+				field |= ep_ring->cycle_state;
+			}
+
+			/* Chain all the TRBs together; clear the chain bit in
+			 * the last TRB to indicate it's the last TRB in the
+			 * chain.
+			 */
+			if (j < trbs_per_td - 1) {
+				field |= TRB_CHAIN;
+			} else {
+				td->last_trb = ep_ring->enqueue;
+				field |= TRB_IOC;
+			}
+
+			/* Calculate TRB length */
+			trb_buff_len = TRB_MAX_BUFF_SIZE -
+				(addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1));
+			if (trb_buff_len > td_remain_len)
+				trb_buff_len = td_remain_len;
+
+			remainder = xhci_td_remainder(td_len - running_total);
+			length_field = TRB_LEN(trb_buff_len) |
+				remainder |
+				TRB_INTR_TARGET(0);
+			queue_trb(xhci, ep_ring, false, false,
+				lower_32_bits(addr),
+				upper_32_bits(addr),
+				length_field,
+				/* We always want to know if the TRB was short,
+				 * or we won't get an event when it completes.
+				 * (Unless we use event data TRBs, which are a
+				 * waste of space and HC resources.)
+				 */
+				field | TRB_ISP);
+			running_total += trb_buff_len;
+
+			addr += trb_buff_len;
+			td_remain_len -= trb_buff_len;
+		}
+
+		/* Check TD length */
+		if (running_total != td_len) {
+			xhci_err(xhci, "ISOC TD length unmatch\n");
+			return -EINVAL;
+		}
+	}
+
+	wmb();
+	start_trb->field[3] |= start_cycle;
+
+	ring_ep_doorbell(xhci, slot_id, ep_index, urb->stream_id);
+	return 0;
+}
+
+/*
+ * Check transfer ring to guarantee there is enough room for the urb.
+ * Update ISO URB start_frame and interval.
+ * Update interval as xhci_queue_intr_tx does. Just use xhci frame_index to
+ * update the urb->start_frame by now.
+ * Always assume URB_ISO_ASAP set, and NEVER use urb->start_frame as input.
+ */
+int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags,
+		struct urb *urb, int slot_id, unsigned int ep_index)
+{
+	struct xhci_virt_device *xdev;
+	struct xhci_ring *ep_ring;
+	struct xhci_ep_ctx *ep_ctx;
+	int start_frame;
+	int xhci_interval;
+	int ep_interval;
+	int num_tds, num_trbs, i;
+	int ret;
+
+	xdev = xhci->devs[slot_id];
+	ep_ring = xdev->eps[ep_index].ring;
+	ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
+
+	num_trbs = 0;
+	num_tds = urb->number_of_packets;
+	for (i = 0; i < num_tds; i++)
+		num_trbs += count_isoc_trbs_needed(xhci, urb, i);
+
+	/* Check the ring to guarantee there is enough room for the whole urb.
+	 * Do not insert any td of the urb to the ring if the check failed.
+	 */
+	ret = prepare_ring(xhci, ep_ring, ep_ctx->ep_info & EP_STATE_MASK,
+				num_trbs, mem_flags);
+	if (ret)
+		return ret;
+
+	start_frame = xhci_readl(xhci, &xhci->run_regs->microframe_index);
+	start_frame &= 0x3fff;
+
+	urb->start_frame = start_frame;
+	if (urb->dev->speed == USB_SPEED_LOW ||
+			urb->dev->speed == USB_SPEED_FULL)
+		urb->start_frame >>= 3;
+
+	xhci_interval = EP_INTERVAL_TO_UFRAMES(ep_ctx->ep_info);
+	ep_interval = urb->interval;
+	/* Convert to microframes */
+	if (urb->dev->speed == USB_SPEED_LOW ||
+			urb->dev->speed == USB_SPEED_FULL)
+		ep_interval *= 8;
+	/* FIXME change this to a warning and a suggestion to use the new API
+	 * to set the polling interval (once the API is added).
+	 */
+	if (xhci_interval != ep_interval) {
+		if (!printk_ratelimit())
+			dev_dbg(&urb->dev->dev, "Driver uses different interval"
+					" (%d microframe%s) than xHCI "
+					"(%d microframe%s)\n",
+					ep_interval,
+					ep_interval == 1 ? "" : "s",
+					xhci_interval,
+					xhci_interval == 1 ? "" : "s");
+		urb->interval = xhci_interval;
+		/* Convert back to frames for LS/FS devices */
+		if (urb->dev->speed == USB_SPEED_LOW ||
+				urb->dev->speed == USB_SPEED_FULL)
+			urb->interval /= 8;
+	}
+	return xhci_queue_isoc_tx(xhci, GFP_ATOMIC, urb, slot_id, ep_index);
+}
+
 /****		Command Ring Operations		****/
 
 /* Generic function for queueing a command TRB on the command ring.
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 3998f72..d5c550e 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -20,6 +20,7 @@
  * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#include <linux/pci.h>
 #include <linux/irq.h>
 #include <linux/log2.h>
 #include <linux/module.h>
@@ -171,22 +172,84 @@ int xhci_reset(struct xhci_hcd *xhci)
 	return handshake(xhci, &xhci->op_regs->status, STS_CNR, 0, 250 * 1000);
 }
 
+/*
+ * Free IRQs
+ * free all IRQs request
+ */
+static void xhci_free_irq(struct xhci_hcd *xhci)
+{
+	int i;
+	struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
 
-#if 0
-/* Set up MSI-X table for entry 0 (may claim other entries later) */
-static int xhci_setup_msix(struct xhci_hcd *xhci)
+	/* return if using legacy interrupt */
+	if (xhci_to_hcd(xhci)->irq >= 0)
+		return;
+
+	if (xhci->msix_entries) {
+		for (i = 0; i < xhci->msix_count; i++)
+			if (xhci->msix_entries[i].vector)
+				free_irq(xhci->msix_entries[i].vector,
+						xhci_to_hcd(xhci));
+	} else if (pdev->irq >= 0)
+		free_irq(pdev->irq, xhci_to_hcd(xhci));
+
+	return;
+}
+
+/*
+ * Set up MSI
+ */
+static int xhci_setup_msi(struct xhci_hcd *xhci)
 {
 	int ret;
+	struct pci_dev  *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
+
+	ret = pci_enable_msi(pdev);
+	if (ret) {
+		xhci_err(xhci, "failed to allocate MSI entry\n");
+		return ret;
+	}
+
+	ret = request_irq(pdev->irq, (irq_handler_t)xhci_msi_irq,
+				0, "xhci_hcd", xhci_to_hcd(xhci));
+	if (ret) {
+		xhci_err(xhci, "disable MSI interrupt\n");
+		pci_disable_msi(pdev);
+	}
+
+	return ret;
+}
+
+/*
+ * Set up MSI-X
+ */
+static int xhci_setup_msix(struct xhci_hcd *xhci)
+{
+	int i, ret = 0;
 	struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
 
-	xhci->msix_count = 0;
-	/* XXX: did I do this right?  ixgbe does kcalloc for more than one */
-	xhci->msix_entries = kmalloc(sizeof(struct msix_entry), GFP_KERNEL);
+	/*
+	 * calculate number of msi-x vectors supported.
+	 * - HCS_MAX_INTRS: the max number of interrupts the host can handle,
+	 *   with max number of interrupters based on the xhci HCSPARAMS1.
+	 * - num_online_cpus: maximum msi-x vectors per CPUs core.
+	 *   Add additional 1 vector to ensure always available interrupt.
+	 */
+	xhci->msix_count = min(num_online_cpus() + 1,
+				HCS_MAX_INTRS(xhci->hcs_params1));
+
+	xhci->msix_entries =
+		kmalloc((sizeof(struct msix_entry))*xhci->msix_count,
+				GFP_KERNEL);
 	if (!xhci->msix_entries) {
 		xhci_err(xhci, "Failed to allocate MSI-X entries\n");
 		return -ENOMEM;
 	}
-	xhci->msix_entries[0].entry = 0;
+
+	for (i = 0; i < xhci->msix_count; i++) {
+		xhci->msix_entries[i].entry = i;
+		xhci->msix_entries[i].vector = 0;
+	}
 
 	ret = pci_enable_msix(pdev, xhci->msix_entries, xhci->msix_count);
 	if (ret) {
@@ -194,20 +257,19 @@ static int xhci_setup_msix(struct xhci_hcd *xhci)
 		goto free_entries;
 	}
 
-	/*
-	 * Pass the xhci pointer value as the request_irq "cookie".
-	 * If more irqs are added, this will need to be unique for each one.
-	 */
-	ret = request_irq(xhci->msix_entries[0].vector, &xhci_irq, 0,
-			"xHCI", xhci_to_hcd(xhci));
-	if (ret) {
-		xhci_err(xhci, "Failed to allocate MSI-X interrupt\n");
-		goto disable_msix;
+	for (i = 0; i < xhci->msix_count; i++) {
+		ret = request_irq(xhci->msix_entries[i].vector,
+				(irq_handler_t)xhci_msi_irq,
+				0, "xhci_hcd", xhci_to_hcd(xhci));
+		if (ret)
+			goto disable_msix;
 	}
-	xhci_dbg(xhci, "Finished setting up MSI-X\n");
-	return 0;
+
+	return ret;
 
 disable_msix:
+	xhci_err(xhci, "disable MSI-X interrupt\n");
+	xhci_free_irq(xhci);
 	pci_disable_msix(pdev);
 free_entries:
 	kfree(xhci->msix_entries);
@@ -215,21 +277,23 @@ free_entries:
 	return ret;
 }
 
-/* XXX: code duplication; can xhci_setup_msix call this? */
 /* Free any IRQs and disable MSI-X */
 static void xhci_cleanup_msix(struct xhci_hcd *xhci)
 {
 	struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
-	if (!xhci->msix_entries)
-		return;
 
-	free_irq(xhci->msix_entries[0].vector, xhci);
-	pci_disable_msix(pdev);
-	kfree(xhci->msix_entries);
-	xhci->msix_entries = NULL;
-	xhci_dbg(xhci, "Finished cleaning up MSI-X\n");
+	xhci_free_irq(xhci);
+
+	if (xhci->msix_entries) {
+		pci_disable_msix(pdev);
+		kfree(xhci->msix_entries);
+		xhci->msix_entries = NULL;
+	} else {
+		pci_disable_msi(pdev);
+	}
+
+	return;
 }
-#endif
 
 /*
  * Initialize memory for HCD and xHC (one-time init).
@@ -257,100 +321,8 @@ int xhci_init(struct usb_hcd *hcd)
 	return retval;
 }
 
-/*
- * Called in interrupt context when there might be work
- * queued on the event ring
- *
- * xhci->lock must be held by caller.
- */
-static void xhci_work(struct xhci_hcd *xhci)
-{
-	u32 temp;
-	u64 temp_64;
-
-	/*
-	 * Clear the op reg interrupt status first,
-	 * so we can receive interrupts from other MSI-X interrupters.
-	 * Write 1 to clear the interrupt status.
-	 */
-	temp = xhci_readl(xhci, &xhci->op_regs->status);
-	temp |= STS_EINT;
-	xhci_writel(xhci, temp, &xhci->op_regs->status);
-	/* FIXME when MSI-X is supported and there are multiple vectors */
-	/* Clear the MSI-X event interrupt status */
-
-	/* Acknowledge the interrupt */
-	temp = xhci_readl(xhci, &xhci->ir_set->irq_pending);
-	temp |= 0x3;
-	xhci_writel(xhci, temp, &xhci->ir_set->irq_pending);
-	/* Flush posted writes */
-	xhci_readl(xhci, &xhci->ir_set->irq_pending);
-
-	if (xhci->xhc_state & XHCI_STATE_DYING)
-		xhci_dbg(xhci, "xHCI dying, ignoring interrupt. "
-				"Shouldn't IRQs be disabled?\n");
-	else
-		/* FIXME this should be a delayed service routine
-		 * that clears the EHB.
-		 */
-		xhci_handle_event(xhci);
-
-	/* Clear the event handler busy flag (RW1C); the event ring should be empty. */
-	temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
-	xhci_write_64(xhci, temp_64 | ERST_EHB, &xhci->ir_set->erst_dequeue);
-	/* Flush posted writes -- FIXME is this necessary? */
-	xhci_readl(xhci, &xhci->ir_set->irq_pending);
-}
-
 /*-------------------------------------------------------------------------*/
 
-/*
- * xHCI spec says we can get an interrupt, and if the HC has an error condition,
- * we might get bad data out of the event ring.  Section 4.10.2.7 has a list of
- * indicators of an event TRB error, but we check the status *first* to be safe.
- */
-irqreturn_t xhci_irq(struct usb_hcd *hcd)
-{
-	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
-	u32 temp, temp2;
-	union xhci_trb *trb;
-
-	spin_lock(&xhci->lock);
-	trb = xhci->event_ring->dequeue;
-	/* Check if the xHC generated the interrupt, or the irq is shared */
-	temp = xhci_readl(xhci, &xhci->op_regs->status);
-	temp2 = xhci_readl(xhci, &xhci->ir_set->irq_pending);
-	if (temp == 0xffffffff && temp2 == 0xffffffff)
-		goto hw_died;
-
-	if (!(temp & STS_EINT) && !ER_IRQ_PENDING(temp2)) {
-		spin_unlock(&xhci->lock);
-		return IRQ_NONE;
-	}
-	xhci_dbg(xhci, "op reg status = %08x\n", temp);
-	xhci_dbg(xhci, "ir set irq_pending = %08x\n", temp2);
-	xhci_dbg(xhci, "Event ring dequeue ptr:\n");
-	xhci_dbg(xhci, "@%llx %08x %08x %08x %08x\n",
-			(unsigned long long)xhci_trb_virt_to_dma(xhci->event_ring->deq_seg, trb),
-			lower_32_bits(trb->link.segment_ptr),
-			upper_32_bits(trb->link.segment_ptr),
-			(unsigned int) trb->link.intr_target,
-			(unsigned int) trb->link.control);
-
-	if (temp & STS_FATAL) {
-		xhci_warn(xhci, "WARNING: Host System Error\n");
-		xhci_halt(xhci);
-hw_died:
-		xhci_to_hcd(xhci)->state = HC_STATE_HALT;
-		spin_unlock(&xhci->lock);
-		return -ESHUTDOWN;
-	}
-
-	xhci_work(xhci);
-	spin_unlock(&xhci->lock);
-
-	return IRQ_HANDLED;
-}
 
 #ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
 void xhci_event_ring_work(unsigned long arg)
@@ -423,21 +395,36 @@ int xhci_run(struct usb_hcd *hcd)
 {
 	u32 temp;
 	u64 temp_64;
+	u32 ret;
 	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	struct pci_dev  *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
 	void (*doorbell)(struct xhci_hcd *) = NULL;
 
 	hcd->uses_new_polling = 1;
-	hcd->poll_rh = 0;
 
 	xhci_dbg(xhci, "xhci_run\n");
-#if 0	/* FIXME: MSI not setup yet */
-	/* Do this at the very last minute */
+	/* unregister the legacy interrupt */
+	if (hcd->irq)
+		free_irq(hcd->irq, hcd);
+	hcd->irq = -1;
+
 	ret = xhci_setup_msix(xhci);
-	if (!ret)
-		return ret;
+	if (ret)
+		/* fall back to msi*/
+		ret = xhci_setup_msi(xhci);
+
+	if (ret) {
+		/* fall back to legacy interrupt*/
+		ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED,
+					hcd->irq_descr, hcd);
+		if (ret) {
+			xhci_err(xhci, "request interrupt %d failed\n",
+					pdev->irq);
+			return ret;
+		}
+		hcd->irq = pdev->irq;
+	}
 
-	return -ENOSYS;
-#endif
 #ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
 	init_timer(&xhci->event_ring_timer);
 	xhci->event_ring_timer.data = (unsigned long) xhci;
@@ -495,7 +482,6 @@ int xhci_run(struct usb_hcd *hcd)
 		return -ENODEV;
 	}
 
-	xhci_dbg(xhci, "// @%p = 0x%x\n", &xhci->op_regs->command, temp);
 	if (doorbell)
 		(*doorbell)(xhci);
 	if (xhci->quirks & XHCI_NEC_HOST)
@@ -522,11 +508,9 @@ void xhci_stop(struct usb_hcd *hcd)
 	spin_lock_irq(&xhci->lock);
 	xhci_halt(xhci);
 	xhci_reset(xhci);
+	xhci_cleanup_msix(xhci);
 	spin_unlock_irq(&xhci->lock);
 
-#if 0	/* No MSI yet */
-	xhci_cleanup_msix(xhci);
-#endif
 #ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
 	/* Tell the event ring poll function not to reschedule */
 	xhci->zombie = 1;
@@ -560,11 +544,8 @@ void xhci_shutdown(struct usb_hcd *hcd)
 
 	spin_lock_irq(&xhci->lock);
 	xhci_halt(xhci);
-	spin_unlock_irq(&xhci->lock);
-
-#if 0
 	xhci_cleanup_msix(xhci);
-#endif
+	spin_unlock_irq(&xhci->lock);
 
 	xhci_dbg(xhci, "xhci_shutdown completed - status = %x\n",
 		    xhci_readl(xhci, &xhci->op_regs->status));
@@ -720,7 +701,8 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags)
 	unsigned long flags;
 	int ret = 0;
 	unsigned int slot_id, ep_index;
-
+	struct urb_priv	*urb_priv;
+	int size, i;
 
 	if (!urb || xhci_check_args(hcd, urb->dev, urb->ep, true, __func__) <= 0)
 		return -EINVAL;
@@ -734,12 +716,36 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags)
 		ret = -EINVAL;
 		goto exit;
 	}
-	if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
+	if (!HCD_HW_ACCESSIBLE(hcd)) {
 		if (!in_interrupt())
 			xhci_dbg(xhci, "urb submitted during PCI suspend\n");
 		ret = -ESHUTDOWN;
 		goto exit;
 	}
+
+	if (usb_endpoint_xfer_isoc(&urb->ep->desc))
+		size = urb->number_of_packets;
+	else
+		size = 1;
+
+	urb_priv = kzalloc(sizeof(struct urb_priv) +
+				  size * sizeof(struct xhci_td *), mem_flags);
+	if (!urb_priv)
+		return -ENOMEM;
+
+	for (i = 0; i < size; i++) {
+		urb_priv->td[i] = kzalloc(sizeof(struct xhci_td), mem_flags);
+		if (!urb_priv->td[i]) {
+			urb_priv->length = i;
+			xhci_urb_free_priv(xhci, urb_priv);
+			return -ENOMEM;
+		}
+	}
+
+	urb_priv->length = size;
+	urb_priv->td_cnt = 0;
+	urb->hcpriv = urb_priv;
+
 	if (usb_endpoint_xfer_control(&urb->ep->desc)) {
 		/* Check to see if the max packet size for the default control
 		 * endpoint changed during FS device enumeration
@@ -788,11 +794,18 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags)
 				slot_id, ep_index);
 		spin_unlock_irqrestore(&xhci->lock, flags);
 	} else {
-		ret = -EINVAL;
+		spin_lock_irqsave(&xhci->lock, flags);
+		if (xhci->xhc_state & XHCI_STATE_DYING)
+			goto dying;
+		ret = xhci_queue_isoc_tx_prepare(xhci, GFP_ATOMIC, urb,
+				slot_id, ep_index);
+		spin_unlock_irqrestore(&xhci->lock, flags);
 	}
 exit:
 	return ret;
 dying:
+	xhci_urb_free_priv(xhci, urb_priv);
+	urb->hcpriv = NULL;
 	xhci_dbg(xhci, "Ep 0x%x: URB %p submitted for "
 			"non-responsive xHCI host.\n",
 			urb->ep->desc.bEndpointAddress, urb);
@@ -800,6 +813,47 @@ dying:
 	return -ESHUTDOWN;
 }
 
+/* Get the right ring for the given URB.
+ * If the endpoint supports streams, boundary check the URB's stream ID.
+ * If the endpoint doesn't support streams, return the singular endpoint ring.
+ */
+static struct xhci_ring *xhci_urb_to_transfer_ring(struct xhci_hcd *xhci,
+		struct urb *urb)
+{
+	unsigned int slot_id;
+	unsigned int ep_index;
+	unsigned int stream_id;
+	struct xhci_virt_ep *ep;
+
+	slot_id = urb->dev->slot_id;
+	ep_index = xhci_get_endpoint_index(&urb->ep->desc);
+	stream_id = urb->stream_id;
+	ep = &xhci->devs[slot_id]->eps[ep_index];
+	/* Common case: no streams */
+	if (!(ep->ep_state & EP_HAS_STREAMS))
+		return ep->ring;
+
+	if (stream_id == 0) {
+		xhci_warn(xhci,
+				"WARN: Slot ID %u, ep index %u has streams, "
+				"but URB has no stream ID.\n",
+				slot_id, ep_index);
+		return NULL;
+	}
+
+	if (stream_id < ep->stream_info->num_streams)
+		return ep->stream_info->stream_rings[stream_id];
+
+	xhci_warn(xhci,
+			"WARN: Slot ID %u, ep index %u has "
+			"stream IDs 1 to %u allocated, "
+			"but stream ID %u is requested.\n",
+			slot_id, ep_index,
+			ep->stream_info->num_streams - 1,
+			stream_id);
+	return NULL;
+}
+
 /*
  * Remove the URB's TD from the endpoint ring.  This may cause the HC to stop
  * USB transfers, potentially stopping in the middle of a TRB buffer.  The HC
@@ -834,9 +888,10 @@ dying:
 int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
 {
 	unsigned long flags;
-	int ret;
+	int ret, i;
 	u32 temp;
 	struct xhci_hcd *xhci;
+	struct urb_priv	*urb_priv;
 	struct xhci_td *td;
 	unsigned int ep_index;
 	struct xhci_ring *ep_ring;
@@ -851,12 +906,12 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
 	temp = xhci_readl(xhci, &xhci->op_regs->status);
 	if (temp == 0xffffffff) {
 		xhci_dbg(xhci, "HW died, freeing TD.\n");
-		td = (struct xhci_td *) urb->hcpriv;
+		urb_priv = urb->hcpriv;
 
 		usb_hcd_unlink_urb_from_ep(hcd, urb);
 		spin_unlock_irqrestore(&xhci->lock, flags);
 		usb_hcd_giveback_urb(xhci_to_hcd(xhci), urb, -ESHUTDOWN);
-		kfree(td);
+		xhci_urb_free_priv(xhci, urb_priv);
 		return ret;
 	}
 	if (xhci->xhc_state & XHCI_STATE_DYING) {
@@ -884,9 +939,14 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
 
 	xhci_dbg(xhci, "Endpoint ring:\n");
 	xhci_debug_ring(xhci, ep_ring);
-	td = (struct xhci_td *) urb->hcpriv;
 
-	list_add_tail(&td->cancelled_td_list, &ep->cancelled_td_list);
+	urb_priv = urb->hcpriv;
+
+	for (i = urb_priv->td_cnt; i < urb_priv->length; i++) {
+		td = urb_priv->td[i];
+		list_add_tail(&td->cancelled_td_list, &ep->cancelled_td_list);
+	}
+
 	/* Queue a stop endpoint command, but only if this is
 	 * the first cancellation to be handled.
 	 */
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 6c7e343..34a60d9 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -720,6 +720,14 @@ struct xhci_virt_ep {
 	struct timer_list	stop_cmd_timer;
 	int			stop_cmds_pending;
 	struct xhci_hcd		*xhci;
+	/*
+	 * Sometimes the xHC can not process isochronous endpoint ring quickly
+	 * enough, and it will miss some isoc tds on the ring and generate
+	 * a Missed Service Error Event.
+	 * Set skip flag when receive a Missed Service Error Event and
+	 * process the missed tds on the endpoint ring.
+	 */
+	bool			skip;
 };
 
 struct xhci_virt_device {
@@ -911,6 +919,9 @@ struct xhci_event_cmd {
 /* Control transfer TRB specific fields */
 #define TRB_DIR_IN		(1<<16)
 
+/* Isochronous TRB specific fields */
+#define TRB_SIA			(1<<31)
+
 struct xhci_generic_trb {
 	u32 field[4];
 };
@@ -1082,6 +1093,12 @@ struct xhci_scratchpad {
 	dma_addr_t *sp_dma_buffers;
 };
 
+struct urb_priv {
+	int	length;
+	int	td_cnt;
+	struct	xhci_td	*td[0];
+};
+
 /*
  * Each segment table entry is 4*32bits long.  1K seems like an ok size:
  * (1K bytes * 8bytes/bit) / (4*32 bits) = 64 segment entries in the table,
@@ -1130,7 +1147,7 @@ struct xhci_hcd {
 	int		page_size;
 	/* Valid values are 12 to 20, inclusive */
 	int		page_shift;
-	/* only one MSI vector for now, but might need more later */
+	/* msi-x vectors */
 	int		msix_count;
 	struct msix_entry	*msix_entries;
 	/* data structures */
@@ -1327,11 +1344,6 @@ void xhci_setup_no_streams_ep_input_ctx(struct xhci_hcd *xhci,
 struct xhci_ring *xhci_dma_to_transfer_ring(
 		struct xhci_virt_ep *ep,
 		u64 address);
-struct xhci_ring *xhci_urb_to_transfer_ring(struct xhci_hcd *xhci,
-		struct urb *urb);
-struct xhci_ring *xhci_triad_to_transfer_ring(struct xhci_hcd *xhci,
-		unsigned int slot_id, unsigned int ep_index,
-		unsigned int stream_id);
 struct xhci_ring *xhci_stream_id_to_ring(
 		struct xhci_virt_device *dev,
 		unsigned int ep_index,
@@ -1339,6 +1351,7 @@ struct xhci_ring *xhci_stream_id_to_ring(
 struct xhci_command *xhci_alloc_command(struct xhci_hcd *xhci,
 		bool allocate_in_ctx, bool allocate_completion,
 		gfp_t mem_flags);
+void xhci_urb_free_priv(struct xhci_hcd *xhci, struct urb_priv *urb_priv);
 void xhci_free_command(struct xhci_hcd *xhci,
 		struct xhci_command *command);
 
@@ -1358,6 +1371,7 @@ void xhci_stop(struct usb_hcd *hcd);
 void xhci_shutdown(struct usb_hcd *hcd);
 int xhci_get_frame(struct usb_hcd *hcd);
 irqreturn_t xhci_irq(struct usb_hcd *hcd);
+irqreturn_t xhci_msi_irq(int irq, struct usb_hcd *hcd);
 int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev);
 void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev);
 int xhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev,
@@ -1386,8 +1400,6 @@ struct xhci_segment *trb_in_td(struct xhci_segment *start_seg,
 int xhci_is_vendor_info_code(struct xhci_hcd *xhci, unsigned int trb_comp_code);
 void xhci_ring_cmd_db(struct xhci_hcd *xhci);
 void *xhci_setup_one_noop(struct xhci_hcd *xhci);
-void xhci_handle_event(struct xhci_hcd *xhci);
-void xhci_set_hc_event_deq(struct xhci_hcd *xhci);
 int xhci_queue_slot_control(struct xhci_hcd *xhci, u32 trb_type, u32 slot_id);
 int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
 		u32 slot_id);
@@ -1401,6 +1413,8 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb,
 		int slot_id, unsigned int ep_index);
 int xhci_queue_intr_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb,
 		int slot_id, unsigned int ep_index);
+int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags,
+		struct urb *urb, int slot_id, unsigned int ep_index);
 int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
 		u32 slot_id, bool command_must_succeed);
 int xhci_queue_evaluate_context(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c
index d7e034a..c5b5710 100644
--- a/drivers/usb/misc/ftdi-elan.c
+++ b/drivers/usb/misc/ftdi-elan.c
@@ -648,7 +648,7 @@ static int ftdi_elan_open(struct inode *inode, struct file *file)
 
 static int ftdi_elan_release(struct inode *inode, struct file *file)
 {
-        struct usb_ftdi *ftdi = (struct usb_ftdi *)file->private_data;
+        struct usb_ftdi *ftdi = file->private_data;
         if (ftdi == NULL)
                 return -ENODEV;
         up(&ftdi->sw_lock);        /* decrement the count on our device */
@@ -671,7 +671,7 @@ static ssize_t ftdi_elan_read(struct file *file, char __user *buffer,
         int bytes_read = 0;
         int retry_on_empty = 10;
         int retry_on_timeout = 5;
-        struct usb_ftdi *ftdi = (struct usb_ftdi *)file->private_data;
+        struct usb_ftdi *ftdi = file->private_data;
         if (ftdi->disconnected > 0) {
                 return -ENODEV;
         }
diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c
index 7dc9d3c..2de49c8 100644
--- a/drivers/usb/misc/iowarrior.c
+++ b/drivers/usb/misc/iowarrior.c
@@ -18,7 +18,7 @@
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/sched.h>
-#include <linux/smp_lock.h>
+#include <linux/mutex.h>
 #include <linux/poll.h>
 #include <linux/usb/iowarrior.h>
 
@@ -61,6 +61,7 @@ MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
 
 /* Module parameters */
+static DEFINE_MUTEX(iowarrior_mutex);
 static int debug = 0;
 module_param(debug, bool, 0644);
 MODULE_PARM_DESC(debug, "debug=1 enables debugging messages");
@@ -282,7 +283,7 @@ static ssize_t iowarrior_read(struct file *file, char __user *buffer,
 	int read_idx;
 	int offset;
 
-	dev = (struct iowarrior *)file->private_data;
+	dev = file->private_data;
 
 	/* verify that the device wasn't unplugged */
 	if (dev == NULL || !dev->present)
@@ -348,7 +349,7 @@ static ssize_t iowarrior_write(struct file *file,
 	char *buf = NULL;	/* for IOW24 and IOW56 we need a buffer */
 	struct urb *int_out_urb = NULL;
 
-	dev = (struct iowarrior *)file->private_data;
+	dev = file->private_data;
 
 	mutex_lock(&dev->mutex);
 	/* verify that the device wasn't unplugged */
@@ -483,7 +484,7 @@ static long iowarrior_ioctl(struct file *file, unsigned int cmd,
 	int retval;
 	int io_res;		/* checks for bytes read/written and copy_to/from_user results */
 
-	dev = (struct iowarrior *)file->private_data;
+	dev = file->private_data;
 	if (dev == NULL) {
 		return -ENODEV;
 	}
@@ -493,7 +494,7 @@ static long iowarrior_ioctl(struct file *file, unsigned int cmd,
 		return -ENOMEM;
 
 	/* lock this object */
-	lock_kernel();
+	mutex_lock(&iowarrior_mutex);
 	mutex_lock(&dev->mutex);
 
 	/* verify that the device wasn't unplugged */
@@ -585,7 +586,7 @@ static long iowarrior_ioctl(struct file *file, unsigned int cmd,
 error_out:
 	/* unlock the device */
 	mutex_unlock(&dev->mutex);
-	unlock_kernel();
+	mutex_unlock(&iowarrior_mutex);
 	kfree(buffer);
 	return retval;
 }
@@ -602,12 +603,12 @@ static int iowarrior_open(struct inode *inode, struct file *file)
 
 	dbg("%s", __func__);
 
-	lock_kernel();
+	mutex_lock(&iowarrior_mutex);
 	subminor = iminor(inode);
 
 	interface = usb_find_interface(&iowarrior_driver, subminor);
 	if (!interface) {
-		unlock_kernel();
+		mutex_unlock(&iowarrior_mutex);
 		err("%s - error, can't find device for minor %d", __func__,
 		    subminor);
 		return -ENODEV;
@@ -617,7 +618,7 @@ static int iowarrior_open(struct inode *inode, struct file *file)
 	dev = usb_get_intfdata(interface);
 	if (!dev) {
 		mutex_unlock(&iowarrior_open_disc_lock);
-		unlock_kernel();
+		mutex_unlock(&iowarrior_mutex);
 		return -ENODEV;
 	}
 
@@ -644,7 +645,7 @@ static int iowarrior_open(struct inode *inode, struct file *file)
 
 out:
 	mutex_unlock(&dev->mutex);
-	unlock_kernel();
+	mutex_unlock(&iowarrior_mutex);
 	return retval;
 }
 
@@ -656,7 +657,7 @@ static int iowarrior_release(struct inode *inode, struct file *file)
 	struct iowarrior *dev;
 	int retval = 0;
 
-	dev = (struct iowarrior *)file->private_data;
+	dev = file->private_data;
 	if (dev == NULL) {
 		return -ENODEV;
 	}
diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c
index 8547bf9..6482c6e 100644
--- a/drivers/usb/misc/legousbtower.c
+++ b/drivers/usb/misc/legousbtower.c
@@ -448,7 +448,7 @@ static int tower_release (struct inode *inode, struct file *file)
 
 	dbg(2, "%s: enter", __func__);
 
-	dev = (struct lego_usb_tower *)file->private_data;
+	dev = file->private_data;
 
 	if (dev == NULL) {
 		dbg(1, "%s: object is NULL", __func__);
@@ -597,7 +597,7 @@ static ssize_t tower_read (struct file *file, char __user *buffer, size_t count,
 
 	dbg(2, "%s: enter, count = %Zd", __func__, count);
 
-	dev = (struct lego_usb_tower *)file->private_data;
+	dev = file->private_data;
 
 	/* lock this object */
 	if (mutex_lock_interruptible(&dev->lock)) {
@@ -686,7 +686,7 @@ static ssize_t tower_write (struct file *file, const char __user *buffer, size_t
 
 	dbg(2, "%s: enter, count = %Zd", __func__, count);
 
-	dev = (struct lego_usb_tower *)file->private_data;
+	dev = file->private_data;
 
 	/* lock this object */
 	if (mutex_lock_interruptible(&dev->lock)) {
diff --git a/drivers/usb/misc/rio500.c b/drivers/usb/misc/rio500.c
index a85771b..cc13ae6 100644
--- a/drivers/usb/misc/rio500.c
+++ b/drivers/usb/misc/rio500.c
@@ -32,7 +32,7 @@
 #include <linux/kernel.h>
 #include <linux/signal.h>
 #include <linux/sched.h>
-#include <linux/smp_lock.h>
+#include <linux/mutex.h>
 #include <linux/errno.h>
 #include <linux/random.h>
 #include <linux/poll.h>
@@ -72,6 +72,7 @@ struct rio_usb_data {
 	struct mutex lock;          /* general race avoidance */
 };
 
+static DEFINE_MUTEX(rio500_mutex);
 static struct rio_usb_data rio_instance;
 
 static int open_rio(struct inode *inode, struct file *file)
@@ -79,12 +80,12 @@ static int open_rio(struct inode *inode, struct file *file)
 	struct rio_usb_data *rio = &rio_instance;
 
 	/* against disconnect() */
-	lock_kernel();
+	mutex_lock(&rio500_mutex);
 	mutex_lock(&(rio->lock));
 
 	if (rio->isopen || !rio->present) {
 		mutex_unlock(&(rio->lock));
-		unlock_kernel();
+		mutex_unlock(&rio500_mutex);
 		return -EBUSY;
 	}
 	rio->isopen = 1;
@@ -94,7 +95,7 @@ static int open_rio(struct inode *inode, struct file *file)
 	mutex_unlock(&(rio->lock));
 
 	dev_info(&rio->rio_dev->dev, "Rio opened.\n");
-	unlock_kernel();
+	mutex_unlock(&rio500_mutex);
 
 	return 0;
 }
@@ -491,7 +492,7 @@ static void disconnect_rio(struct usb_interface *intf)
 	struct rio_usb_data *rio = usb_get_intfdata (intf);
 
 	usb_set_intfdata (intf, NULL);
-	lock_kernel();
+	mutex_lock(&rio500_mutex);
 	if (rio) {
 		usb_deregister_dev(intf, &usb_rio_class);
 
@@ -501,7 +502,7 @@ static void disconnect_rio(struct usb_interface *intf)
 			/* better let it finish - the release will do whats needed */
 			rio->rio_dev = NULL;
 			mutex_unlock(&(rio->lock));
-			unlock_kernel();
+			mutex_unlock(&rio500_mutex);
 			return;
 		}
 		kfree(rio->ibuf);
@@ -512,7 +513,7 @@ static void disconnect_rio(struct usb_interface *intf)
 		rio->present = 0;
 		mutex_unlock(&(rio->lock));
 	}
-	unlock_kernel();
+	mutex_unlock(&rio500_mutex);
 }
 
 static const struct usb_device_id rio_table[] = {
diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c
index d25814c..70d00e9 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.c
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -2487,7 +2487,7 @@ sisusb_release(struct inode *inode, struct file *file)
 {
 	struct sisusb_usb_data *sisusb;
 
-	if (!(sisusb = (struct sisusb_usb_data *)file->private_data))
+	if (!(sisusb = file->private_data))
 		return -ENODEV;
 
 	mutex_lock(&sisusb->lock);
@@ -2519,7 +2519,7 @@ sisusb_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos)
 	u16 buf16;
 	u32 buf32, address;
 
-	if (!(sisusb = (struct sisusb_usb_data *)file->private_data))
+	if (!(sisusb = file->private_data))
 		return -ENODEV;
 
 	mutex_lock(&sisusb->lock);
@@ -2661,7 +2661,7 @@ sisusb_write(struct file *file, const char __user *buffer, size_t count,
 	u16 buf16;
 	u32 buf32, address;
 
-	if (!(sisusb = (struct sisusb_usb_data *)file->private_data))
+	if (!(sisusb = file->private_data))
 		return -ENODEV;
 
 	mutex_lock(&sisusb->lock);
@@ -2804,7 +2804,7 @@ sisusb_lseek(struct file *file, loff_t offset, int orig)
 	struct sisusb_usb_data *sisusb;
 	loff_t ret;
 
-	if (!(sisusb = (struct sisusb_usb_data *)file->private_data))
+	if (!(sisusb = file->private_data))
 		return -ENODEV;
 
 	mutex_lock(&sisusb->lock);
@@ -2969,7 +2969,7 @@ sisusb_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	long retval = 0;
 	u32 __user *argp = (u32 __user *)arg;
 
-	if (!(sisusb = (struct sisusb_usb_data *)file->private_data))
+	if (!(sisusb = file->private_data))
 		return -ENODEV;
 
 	mutex_lock(&sisusb->lock);
diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c
index 7828c76..d00dde1 100644
--- a/drivers/usb/misc/usblcd.c
+++ b/drivers/usb/misc/usblcd.c
@@ -16,7 +16,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/errno.h>
 #include <linux/mutex.h>
 #include <asm/uaccess.h>
@@ -30,6 +29,7 @@
 #define IOCTL_GET_DRV_VERSION	2
 
 
+static DEFINE_MUTEX(lcd_mutex);
 static const struct usb_device_id id_table[] = {
 	{ .idVendor = 0x10D2, .match_flags = USB_DEVICE_ID_MATCH_VENDOR, },
 	{ },
@@ -74,12 +74,12 @@ static int lcd_open(struct inode *inode, struct file *file)
 	struct usb_interface *interface;
 	int subminor, r;
 
-	lock_kernel();
+	mutex_lock(&lcd_mutex);
 	subminor = iminor(inode);
 
 	interface = usb_find_interface(&lcd_driver, subminor);
 	if (!interface) {
-		unlock_kernel();
+		mutex_unlock(&lcd_mutex);
 		err ("USBLCD: %s - error, can't find device for minor %d",
 		     __func__, subminor);
 		return -ENODEV;
@@ -89,7 +89,7 @@ static int lcd_open(struct inode *inode, struct file *file)
 	dev = usb_get_intfdata(interface);
 	if (!dev) {
 		mutex_unlock(&open_disc_mutex);
-		unlock_kernel();
+		mutex_unlock(&lcd_mutex);
 		return -ENODEV;
 	}
 
@@ -101,13 +101,13 @@ static int lcd_open(struct inode *inode, struct file *file)
 	r = usb_autopm_get_interface(interface);
 	if (r < 0) {
 		kref_put(&dev->kref, lcd_delete);
-		unlock_kernel();
+		mutex_unlock(&lcd_mutex);
 		return r;
 	}
 
 	/* save our object in the file's private structure */
 	file->private_data = dev;
-	unlock_kernel();
+	mutex_unlock(&lcd_mutex);
 
 	return 0;
 }
@@ -116,7 +116,7 @@ static int lcd_release(struct inode *inode, struct file *file)
 {
 	struct usb_lcd *dev;
 
-	dev = (struct usb_lcd *)file->private_data;
+	dev = file->private_data;
 	if (dev == NULL)
 		return -ENODEV;
 
@@ -132,7 +132,7 @@ static ssize_t lcd_read(struct file *file, char __user * buffer, size_t count, l
 	int retval = 0;
 	int bytes_read;
 
-	dev = (struct usb_lcd *)file->private_data;
+	dev = file->private_data;
 
 	/* do a blocking bulk read to get data from the device */
 	retval = usb_bulk_msg(dev->udev, 
@@ -158,20 +158,20 @@ static long lcd_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	u16 bcdDevice;
 	char buf[30];
 
-	dev = (struct usb_lcd *)file->private_data;
+	dev = file->private_data;
 	if (dev == NULL)
 		return -ENODEV;
 	
 	switch (cmd) {
 	case IOCTL_GET_HARD_VERSION:
-		lock_kernel();
+		mutex_lock(&lcd_mutex);
 		bcdDevice = le16_to_cpu((dev->udev)->descriptor.bcdDevice);
 		sprintf(buf,"%1d%1d.%1d%1d",
 			(bcdDevice & 0xF000)>>12,
 			(bcdDevice & 0xF00)>>8,
 			(bcdDevice & 0xF0)>>4,
 			(bcdDevice & 0xF));
-		unlock_kernel();
+		mutex_unlock(&lcd_mutex);
 		if (copy_to_user((void __user *)arg,buf,strlen(buf))!=0)
 			return -EFAULT;
 		break;
@@ -217,7 +217,7 @@ static ssize_t lcd_write(struct file *file, const char __user * user_buffer, siz
 	struct urb *urb = NULL;
 	char *buf = NULL;
 	
-	dev = (struct usb_lcd *)file->private_data;
+	dev = file->private_data;
 	
 	/* verify that we actually have some data to write */
 	if (count == 0)
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index 16dffe9..eef370e 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -136,7 +136,7 @@ try_iso:
 					iso_out = e;
 			}
 		}
-		if ((in && out)  ||  (iso_in && iso_out))
+		if ((in && out)  ||  iso_in || iso_out)
 			goto found;
 	}
 	return -EINVAL;
@@ -162,6 +162,9 @@ found:
 		dev->in_iso_pipe = usb_rcvisocpipe (udev,
 				iso_in->desc.bEndpointAddress
 					& USB_ENDPOINT_NUMBER_MASK);
+	}
+
+	if (iso_out) {
 		dev->iso_out = &iso_out->desc;
 		dev->out_iso_pipe = usb_sndisocpipe (udev,
 				iso_out->desc.bEndpointAddress
@@ -1378,7 +1381,6 @@ static void iso_callback (struct urb *urb)
 			break;
 		}
 	}
-	simple_free_urb (urb);
 
 	ctx->pending--;
 	if (ctx->pending == 0) {
@@ -1495,6 +1497,7 @@ test_iso_queue (struct usbtest_dev *dev, struct usbtest_param *param,
 			}
 
 			simple_free_urb (urbs [i]);
+			urbs[i] = NULL;
 			context.pending--;
 			context.submit_error = 1;
 			break;
@@ -1504,6 +1507,10 @@ test_iso_queue (struct usbtest_dev *dev, struct usbtest_param *param,
 
 	wait_for_completion (&context.done);
 
+	for (i = 0; i < param->sglen; i++) {
+		if (urbs[i])
+			simple_free_urb(urbs[i]);
+	}
 	/*
 	 * Isochronous transfers are expected to fail sometimes.  As an
 	 * arbitrary limit, we will report an error if any submissions
@@ -1548,6 +1555,7 @@ fail:
  * off just killing the userspace task and waiting for it to exit.
  */
 
+/* No BKL needed */
 static int
 usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *buf)
 {
@@ -2170,7 +2178,7 @@ static struct usb_driver usbtest_driver = {
 	.name =		"usbtest",
 	.id_table =	id_table,
 	.probe =	usbtest_probe,
-	.ioctl =	usbtest_ioctl,
+	.unlocked_ioctl = usbtest_ioctl,
 	.disconnect =	usbtest_disconnect,
 	.suspend =	usbtest_suspend,
 	.resume =	usbtest_resume,
diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c
index 61c76b1..44cb37b 100644
--- a/drivers/usb/mon/mon_bin.c
+++ b/drivers/usb/mon/mon_bin.c
@@ -646,17 +646,14 @@ static int mon_bin_open(struct inode *inode, struct file *file)
 	size_t size;
 	int rc;
 
-	lock_kernel();
 	mutex_lock(&mon_lock);
 	if ((mbus = mon_bus_lookup(iminor(inode))) == NULL) {
 		mutex_unlock(&mon_lock);
-		unlock_kernel();
 		return -ENODEV;
 	}
 	if (mbus != &mon_bus0 && mbus->u_bus == NULL) {
 		printk(KERN_ERR TAG ": consistency error on open\n");
 		mutex_unlock(&mon_lock);
-		unlock_kernel();
 		return -ENODEV;
 	}
 
@@ -689,7 +686,6 @@ static int mon_bin_open(struct inode *inode, struct file *file)
 
 	file->private_data = rp;
 	mutex_unlock(&mon_lock);
-	unlock_kernel();
 	return 0;
 
 err_allocbuff:
@@ -698,7 +694,6 @@ err_allocvec:
 	kfree(rp);
 err_alloc:
 	mutex_unlock(&mon_lock);
-	unlock_kernel();
 	return rc;
 }
 
@@ -954,7 +949,7 @@ static int mon_bin_queued(struct mon_reader_bin *rp)
 
 /*
  */
-static int mon_bin_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+static long mon_bin_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	struct mon_reader_bin *rp = file->private_data;
 	// struct mon_bus* mbus = rp->r.m_bus;
@@ -1009,7 +1004,7 @@ static int mon_bin_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 
 		mutex_lock(&rp->fetch_lock);
 		spin_lock_irqsave(&rp->b_lock, flags);
-		mon_free_buff(rp->b_vec, size/CHUNK_SIZE);
+		mon_free_buff(rp->b_vec, rp->b_size/CHUNK_SIZE);
 		kfree(rp->b_vec);
 		rp->b_vec  = vec;
 		rp->b_size = size;
@@ -1094,19 +1089,6 @@ static int mon_bin_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	return ret;
 }
 
-static long mon_bin_unlocked_ioctl(struct file *file, unsigned int cmd,
-				   unsigned long arg)
-{
-	int ret;
-
-	lock_kernel();
-	ret = mon_bin_ioctl(file, cmd, arg);
-	unlock_kernel();
-
-	return ret;
-}
-
-
 #ifdef CONFIG_COMPAT
 static long mon_bin_compat_ioctl(struct file *file,
     unsigned int cmd, unsigned long arg)
@@ -1250,7 +1232,7 @@ static const struct file_operations mon_fops_binary = {
 	.read =		mon_bin_read,
 	/* .write =	mon_text_write, */
 	.poll =		mon_bin_poll,
-	.unlocked_ioctl = mon_bin_unlocked_ioctl,
+	.unlocked_ioctl = mon_bin_ioctl,
 #ifdef CONFIG_COMPAT
 	.compat_ioctl =	mon_bin_compat_ioctl,
 #endif
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 3b795c5..540c766 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -704,7 +704,6 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 #ifdef CONFIG_USB_MUSB_HDRC_HCD
 	if (int_usb & MUSB_INTR_CONNECT) {
 		struct usb_hcd *hcd = musb_to_hcd(musb);
-		void __iomem *mbase = musb->mregs;
 
 		handled = IRQ_HANDLED;
 		musb->is_active = 1;
@@ -717,9 +716,9 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 		if (is_peripheral_active(musb)) {
 			/* REVISIT HNP; just force disconnect */
 		}
-		musb_writew(mbase, MUSB_INTRTXE, musb->epmask);
-		musb_writew(mbase, MUSB_INTRRXE, musb->epmask & 0xfffe);
-		musb_writeb(mbase, MUSB_INTRUSBE, 0xf7);
+		musb_writew(musb->mregs, MUSB_INTRTXE, musb->epmask);
+		musb_writew(musb->mregs, MUSB_INTRRXE, musb->epmask & 0xfffe);
+		musb_writeb(musb->mregs, MUSB_INTRUSBE, 0xf7);
 #endif
 		musb->port1_status &= ~(USB_PORT_STAT_LOW_SPEED
 					|USB_PORT_STAT_HIGH_SPEED
diff --git a/drivers/usb/musb/musb_debugfs.c b/drivers/usb/musb/musb_debugfs.c
index bba76af..c79a5e3 100644
--- a/drivers/usb/musb/musb_debugfs.c
+++ b/drivers/usb/musb/musb_debugfs.c
@@ -92,29 +92,29 @@ static const struct musb_register_map musb_regmap[] = {
 	{ "LS_EOF1",		0x7E,	8 },
 	{ "SOFT_RST",		0x7F,	8 },
 	{ "DMA_CNTLch0",	0x204,	16 },
-	{ "DMA_ADDRch0",	0x208,	16 },
-	{ "DMA_COUNTch0",	0x20C,	16 },
+	{ "DMA_ADDRch0",	0x208,	32 },
+	{ "DMA_COUNTch0",	0x20C,	32 },
 	{ "DMA_CNTLch1",	0x214,	16 },
-	{ "DMA_ADDRch1",	0x218,	16 },
-	{ "DMA_COUNTch1",	0x21C,	16 },
+	{ "DMA_ADDRch1",	0x218,	32 },
+	{ "DMA_COUNTch1",	0x21C,	32 },
 	{ "DMA_CNTLch2",	0x224,	16 },
-	{ "DMA_ADDRch2",	0x228,	16 },
-	{ "DMA_COUNTch2",	0x22C,	16 },
+	{ "DMA_ADDRch2",	0x228,	32 },
+	{ "DMA_COUNTch2",	0x22C,	32 },
 	{ "DMA_CNTLch3",	0x234,	16 },
-	{ "DMA_ADDRch3",	0x238,	16 },
-	{ "DMA_COUNTch3",	0x23C,	16 },
+	{ "DMA_ADDRch3",	0x238,	32 },
+	{ "DMA_COUNTch3",	0x23C,	32 },
 	{ "DMA_CNTLch4",	0x244,	16 },
-	{ "DMA_ADDRch4",	0x248,	16 },
-	{ "DMA_COUNTch4",	0x24C,	16 },
+	{ "DMA_ADDRch4",	0x248,	32 },
+	{ "DMA_COUNTch4",	0x24C,	32 },
 	{ "DMA_CNTLch5",	0x254,	16 },
-	{ "DMA_ADDRch5",	0x258,	16 },
-	{ "DMA_COUNTch5",	0x25C,	16 },
+	{ "DMA_ADDRch5",	0x258,	32 },
+	{ "DMA_COUNTch5",	0x25C,	32 },
 	{ "DMA_CNTLch6",	0x264,	16 },
-	{ "DMA_ADDRch6",	0x268,	16 },
-	{ "DMA_COUNTch6",	0x26C,	16 },
+	{ "DMA_ADDRch6",	0x268,	32 },
+	{ "DMA_COUNTch6",	0x26C,	32 },
 	{ "DMA_CNTLch7",	0x274,	16 },
-	{ "DMA_ADDRch7",	0x278,	16 },
-	{ "DMA_COUNTch7",	0x27C,	16 },
+	{ "DMA_ADDRch7",	0x278,	32 },
+	{ "DMA_COUNTch7",	0x27C,	32 },
 	{  }	/* Terminating Entry */
 };
 
diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c
index 21b9788..59bef8f 100644
--- a/drivers/usb/musb/musb_gadget_ep0.c
+++ b/drivers/usb/musb/musb_gadget_ep0.c
@@ -402,6 +402,9 @@ __acquires(musb->lock)
 					musb->g.a_alt_hnp_support = 1;
 					break;
 #endif
+				case USB_DEVICE_DEBUG_MODE:
+					handled = 0;
+					break;
 stall:
 				default:
 					handled = -EINVAL;
diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c
index 92e85e0..43233c3 100644
--- a/drivers/usb/musb/musb_virthub.c
+++ b/drivers/usb/musb/musb_virthub.c
@@ -244,7 +244,7 @@ int musb_hub_control(
 
 	spin_lock_irqsave(&musb->lock, flags);
 
-	if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))) {
+	if (unlikely(!HCD_HW_ACCESSIBLE(hcd))) {
 		spin_unlock_irqrestore(&musb->lock, flags);
 		return -ESHUTDOWN;
 	}
diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c
index dc66e43..6dc107f 100644
--- a/drivers/usb/musb/musbhsdma.c
+++ b/drivers/usb/musb/musbhsdma.c
@@ -173,10 +173,7 @@ static int dma_channel_program(struct dma_channel *channel,
 	musb_channel->max_packet_sz = packet_sz;
 	channel->status = MUSB_DMA_STATUS_BUSY;
 
-	if ((mode == 1) && (len >= packet_sz))
-		configure_channel(channel, packet_sz, 1, dma_addr, len);
-	else
-		configure_channel(channel, packet_sz, 0, dma_addr, len);
+	configure_channel(channel, packet_sz, mode, dma_addr, len);
 
 	return true;
 }
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index e06d65e..2111a24 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -32,8 +32,6 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <plat/mux.h>
-
 #include "musb_core.h"
 #include "omap2430.h"
 
@@ -194,10 +192,6 @@ int __init musb_platform_init(struct musb *musb, void *board_data)
 	u32 l;
 	struct omap_musb_board_data *data = board_data;
 
-#if defined(CONFIG_ARCH_OMAP2430)
-	omap_cfg_reg(AE5_2430_USB0HS_STP);
-#endif
-
 	/* We require some kind of external transceiver, hooked
 	 * up through ULPI.  TWL4030-family PMICs include one,
 	 * which needs a driver, drivers aren't always needed.
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index 3d2d3e5..3b12895 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -49,8 +49,6 @@ config USB_ULPI
 	  Enable this to support ULPI connected USB OTG transceivers which
 	  are likely found on embedded boards.
 
-	  The only chip currently supported is NXP's ISP1504
-
 config TWL4030_USB
 	tristate "TWL4030 USB Transceiver Driver"
 	depends on TWL4030_CORE && REGULATOR_TWL4030
diff --git a/drivers/usb/otg/ulpi.c b/drivers/usb/otg/ulpi.c
index d331b22..ccc8195 100644
--- a/drivers/usb/otg/ulpi.c
+++ b/drivers/usb/otg/ulpi.c
@@ -31,30 +31,110 @@
 
 #define ULPI_ID(vendor, product) (((vendor) << 16) | (product))
 
-#define TR_FLAG(flags, a, b)	(((flags) & a) ? b : 0)
-
 /* ULPI hardcoded IDs, used for probing */
 static unsigned int ulpi_ids[] = {
 	ULPI_ID(0x04cc, 0x1504),	/* NXP ISP1504 */
+	ULPI_ID(0x0424, 0x0006),        /* SMSC USB3319 */
 };
 
-static int ulpi_set_flags(struct otg_transceiver *otg)
+static int ulpi_set_otg_flags(struct otg_transceiver *otg)
 {
-	unsigned int flags = 0;
+	unsigned int flags = ULPI_OTG_CTRL_DP_PULLDOWN |
+			     ULPI_OTG_CTRL_DM_PULLDOWN;
 
-	if (otg->flags & USB_OTG_PULLUP_ID)
+	if (otg->flags & ULPI_OTG_ID_PULLUP)
 		flags |= ULPI_OTG_CTRL_ID_PULLUP;
 
-	if (otg->flags & USB_OTG_PULLDOWN_DM)
-		flags |= ULPI_OTG_CTRL_DM_PULLDOWN;
+	/*
+	 * ULPI Specification rev.1.1 default
+	 * for Dp/DmPulldown is enabled.
+	 */
+	if (otg->flags & ULPI_OTG_DP_PULLDOWN_DIS)
+		flags &= ~ULPI_OTG_CTRL_DP_PULLDOWN;
 
-	if (otg->flags & USB_OTG_PULLDOWN_DP)
-		flags |= ULPI_OTG_CTRL_DP_PULLDOWN;
+	if (otg->flags & ULPI_OTG_DM_PULLDOWN_DIS)
+		flags &= ~ULPI_OTG_CTRL_DM_PULLDOWN;
 
-	if (otg->flags & USB_OTG_EXT_VBUS_INDICATOR)
+	if (otg->flags & ULPI_OTG_EXTVBUSIND)
 		flags |= ULPI_OTG_CTRL_EXTVBUSIND;
 
-	return otg_io_write(otg, flags, ULPI_SET(ULPI_OTG_CTRL));
+	return otg_io_write(otg, flags, ULPI_OTG_CTRL);
+}
+
+static int ulpi_set_fc_flags(struct otg_transceiver *otg)
+{
+	unsigned int flags = 0;
+
+	/*
+	 * ULPI Specification rev.1.1 default
+	 * for XcvrSelect is Full Speed.
+	 */
+	if (otg->flags & ULPI_FC_HS)
+		flags |= ULPI_FUNC_CTRL_HIGH_SPEED;
+	else if (otg->flags & ULPI_FC_LS)
+		flags |= ULPI_FUNC_CTRL_LOW_SPEED;
+	else if (otg->flags & ULPI_FC_FS4LS)
+		flags |= ULPI_FUNC_CTRL_FS4LS;
+	else
+		flags |= ULPI_FUNC_CTRL_FULL_SPEED;
+
+	if (otg->flags & ULPI_FC_TERMSEL)
+		flags |= ULPI_FUNC_CTRL_TERMSELECT;
+
+	/*
+	 * ULPI Specification rev.1.1 default
+	 * for OpMode is Normal Operation.
+	 */
+	if (otg->flags & ULPI_FC_OP_NODRV)
+		flags |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING;
+	else if (otg->flags & ULPI_FC_OP_DIS_NRZI)
+		flags |= ULPI_FUNC_CTRL_OPMODE_DISABLE_NRZI;
+	else if (otg->flags & ULPI_FC_OP_NSYNC_NEOP)
+		flags |= ULPI_FUNC_CTRL_OPMODE_NOSYNC_NOEOP;
+	else
+		flags |= ULPI_FUNC_CTRL_OPMODE_NORMAL;
+
+	/*
+	 * ULPI Specification rev.1.1 default
+	 * for SuspendM is Powered.
+	 */
+	flags |= ULPI_FUNC_CTRL_SUSPENDM;
+
+	return otg_io_write(otg, flags, ULPI_FUNC_CTRL);
+}
+
+static int ulpi_set_ic_flags(struct otg_transceiver *otg)
+{
+	unsigned int flags = 0;
+
+	if (otg->flags & ULPI_IC_AUTORESUME)
+		flags |= ULPI_IFC_CTRL_AUTORESUME;
+
+	if (otg->flags & ULPI_IC_EXTVBUS_INDINV)
+		flags |= ULPI_IFC_CTRL_EXTERNAL_VBUS;
+
+	if (otg->flags & ULPI_IC_IND_PASSTHRU)
+		flags |= ULPI_IFC_CTRL_PASSTHRU;
+
+	if (otg->flags & ULPI_IC_PROTECT_DIS)
+		flags |= ULPI_IFC_CTRL_PROTECT_IFC_DISABLE;
+
+	return otg_io_write(otg, flags, ULPI_IFC_CTRL);
+}
+
+static int ulpi_set_flags(struct otg_transceiver *otg)
+{
+	int ret;
+
+	ret = ulpi_set_otg_flags(otg);
+	if (ret)
+		return ret;
+
+	ret = ulpi_set_ic_flags(otg);
+	if (ret)
+		return ret;
+
+	return ulpi_set_fc_flags(otg);
 }
 
 static int ulpi_init(struct otg_transceiver *otg)
@@ -81,6 +161,31 @@ static int ulpi_init(struct otg_transceiver *otg)
 	return -ENODEV;
 }
 
+static int ulpi_set_host(struct otg_transceiver *otg, struct usb_bus *host)
+{
+	unsigned int flags = otg_io_read(otg, ULPI_IFC_CTRL);
+
+	if (!host) {
+		otg->host = NULL;
+		return 0;
+	}
+
+	otg->host = host;
+
+	flags &= ~(ULPI_IFC_CTRL_6_PIN_SERIAL_MODE |
+		   ULPI_IFC_CTRL_3_PIN_SERIAL_MODE |
+		   ULPI_IFC_CTRL_CARKITMODE);
+
+	if (otg->flags & ULPI_IC_6PIN_SERIAL)
+		flags |= ULPI_IFC_CTRL_6_PIN_SERIAL_MODE;
+	else if (otg->flags & ULPI_IC_3PIN_SERIAL)
+		flags |= ULPI_IFC_CTRL_3_PIN_SERIAL_MODE;
+	else if (otg->flags & ULPI_IC_CARKIT)
+		flags |= ULPI_IFC_CTRL_CARKITMODE;
+
+	return otg_io_write(otg, flags, ULPI_IFC_CTRL);
+}
+
 static int ulpi_set_vbus(struct otg_transceiver *otg, bool on)
 {
 	unsigned int flags = otg_io_read(otg, ULPI_OTG_CTRL);
@@ -88,14 +193,14 @@ static int ulpi_set_vbus(struct otg_transceiver *otg, bool on)
 	flags &= ~(ULPI_OTG_CTRL_DRVVBUS | ULPI_OTG_CTRL_DRVVBUS_EXT);
 
 	if (on) {
-		if (otg->flags & USB_OTG_DRV_VBUS)
+		if (otg->flags & ULPI_OTG_DRVVBUS)
 			flags |= ULPI_OTG_CTRL_DRVVBUS;
 
-		if (otg->flags & USB_OTG_DRV_VBUS_EXT)
+		if (otg->flags & ULPI_OTG_DRVVBUS_EXT)
 			flags |= ULPI_OTG_CTRL_DRVVBUS_EXT;
 	}
 
-	return otg_io_write(otg, flags, ULPI_SET(ULPI_OTG_CTRL));
+	return otg_io_write(otg, flags, ULPI_OTG_CTRL);
 }
 
 struct otg_transceiver *
@@ -112,6 +217,7 @@ otg_ulpi_create(struct otg_io_access_ops *ops,
 	otg->flags	= flags;
 	otg->io_ops	= ops;
 	otg->init	= ulpi_init;
+	otg->set_host	= ulpi_set_host;
 	otg->set_vbus	= ulpi_set_vbus;
 
 	return otg;
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index bd8aab0..916b2b6 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -642,6 +642,15 @@ config USB_SERIAL_ZIO
 	  To compile this driver as a module, choose M here: the
 	  module will be called zio.
 
+config USB_SERIAL_SSU100
+	tristate "USB Quatech SSU-100 Single Port Serial Driver"
+	help
+	  Say Y here if you want to use the Quatech SSU-100 single
+	  port usb to serial adapter.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ssu100.
+
 config USB_SERIAL_DEBUG
 	tristate "USB Debugging Device"
 	help
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index e54c728..40ebe17 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -51,6 +51,7 @@ obj-$(CONFIG_USB_SERIAL_SAFE)			+= safe_serial.o
 obj-$(CONFIG_USB_SERIAL_SIEMENS_MPI)		+= siemens_mpi.o
 obj-$(CONFIG_USB_SERIAL_SIERRAWIRELESS)		+= sierra.o
 obj-$(CONFIG_USB_SERIAL_SPCP8X5)		+= spcp8x5.o
+obj-$(CONFIG_USB_SERIAL_SSU100)			+= ssu100.o
 obj-$(CONFIG_USB_SERIAL_SYMBOL)			+= symbolserial.o
 obj-$(CONFIG_USB_SERIAL_WWAN)			+= usb_wwan.o
 obj-$(CONFIG_USB_SERIAL_TI)			+= ti_usb_3410_5052.o
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 8b8c797..2bef441 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -126,6 +126,10 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
 	{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
 	{ USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */
+	{ USB_DEVICE(0x16DC, 0x0010) }, /* W-IE-NE-R Plein & Baus GmbH PL512 Power Supply */
+	{ USB_DEVICE(0x16DC, 0x0011) }, /* W-IE-NE-R Plein & Baus GmbH RCM Remote Control for MARATON Power Supply */
+	{ USB_DEVICE(0x16DC, 0x0012) }, /* W-IE-NE-R Plein & Baus GmbH MPOD Multi Channel Power Supply */
+	{ USB_DEVICE(0x16DC, 0x0015) }, /* W-IE-NE-R Plein & Baus GmbH CML Control, Monitoring and Data Logger */
 	{ } /* Terminating Entry */
 };
 
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index fd35f73..b92070c 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -609,8 +609,10 @@ static void digi_wakeup_write_lock(struct work_struct *work)
 static void digi_wakeup_write(struct usb_serial_port *port)
 {
 	struct tty_struct *tty = tty_port_tty_get(&port->port);
-	tty_wakeup(tty);
-	tty_kref_put(tty);
+	if (tty) {
+		tty_wakeup(tty);
+		tty_kref_put(tty);
+	}
 }
 
 
@@ -1682,7 +1684,7 @@ static int digi_read_inb_callback(struct urb *urb)
 		priv->dp_throttle_restart = 1;
 
 	/* receive data */
-	if (opcode == DIGI_CMD_RECEIVE_DATA) {
+	if (tty && opcode == DIGI_CMD_RECEIVE_DATA) {
 		/* get flag from port_status */
 		flag = 0;
 
@@ -1763,10 +1765,12 @@ static int digi_read_oob_callback(struct urb *urb)
 			return -1;
 
 		tty = tty_port_tty_get(&port->port);
+
 		rts = 0;
-		rts = tty->termios->c_cflag & CRTSCTS;
+		if (tty)
+			rts = tty->termios->c_cflag & CRTSCTS;
 		
-		if (opcode == DIGI_CMD_READ_INPUT_SIGNALS) {
+		if (tty && opcode == DIGI_CMD_READ_INPUT_SIGNALS) {
 			spin_lock(&priv->dp_port_lock);
 			/* convert from digi flags to termiox flags */
 			if (val & DIGI_READ_INPUT_SIGNALS_CTS) {
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index e34023f..4fc588c 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -157,6 +157,9 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_5_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_6_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_7_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_USINT_CAT_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_USINT_WKEY_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_USINT_RS232_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ACTZWAVE_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_IRTRANS_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_IPLUS_PID) },
@@ -746,6 +749,7 @@ static struct usb_device_id id_table_combined [] = {
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SH4_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, SEGWAY_RMP200_PID) },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index d01946d..6e612c5 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -40,6 +40,11 @@
 
 #define FTDI_NXTCAM_PID		0xABB8 /* NXTCam for Mindstorms NXT */
 
+/* US Interface Navigator (http://www.usinterface.com/) */
+#define FTDI_USINT_CAT_PID	0xb810	/* Navigator CAT and 2nd PTT lines */
+#define FTDI_USINT_WKEY_PID	0xb811	/* Navigator WKEY and FSK lines */
+#define FTDI_USINT_RS232_PID	0xb812	/* Navigator RS232 and CONFIG lines */
+
 /* OOCDlink by Joern Kaipf <joernk@web.de>
  * (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */
 #define FTDI_OOCDLINK_PID	0xbaf8	/* Amontec JTAGkey */
@@ -1032,3 +1037,8 @@
 #define XVERVE_SIGNALYZER_SH2_PID	0xBCA2
 #define XVERVE_SIGNALYZER_SH4_PID	0xBCA4
 
+/*
+ * Segway Robotic Mobility Platform USB interface (using VID 0x0403)
+ * Submitted by John G. Rogers
+ */
+#define SEGWAY_RMP200_PID	0xe729
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index a817ced..ca92f67 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -208,18 +208,23 @@ retry:
 	urb->transfer_buffer_length = count;
 	usb_serial_debug_data(debug, &port->dev, __func__, count,
 						urb->transfer_buffer);
+	spin_lock_irqsave(&port->lock, flags);
+	port->tx_bytes += count;
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	clear_bit(i, &port->write_urbs_free);
 	result = usb_submit_urb(urb, GFP_ATOMIC);
 	if (result) {
 		dev_err(&port->dev, "%s - error submitting urb: %d\n",
 						__func__, result);
+		set_bit(i, &port->write_urbs_free);
+		spin_lock_irqsave(&port->lock, flags);
+		port->tx_bytes -= count;
+		spin_unlock_irqrestore(&port->lock, flags);
+
 		clear_bit_unlock(USB_SERIAL_WRITE_BUSY, &port->flags);
 		return result;
 	}
-	clear_bit(i, &port->write_urbs_free);
-
-	spin_lock_irqsave(&port->lock, flags);
-	port->tx_bytes += count;
-	spin_unlock_irqrestore(&port->lock, flags);
 
 	/* Try sending off another urb, unless in irq context (in which case
 	 * there will be no free urb). */
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index 4a6da66..9d6be30 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -1298,7 +1298,7 @@ static int download_fw(struct edgeport_serial *serial)
 				kfree(header);
 				kfree(rom_desc);
 				kfree(ti_manuf_desc);
-				return status;
+				return -EINVAL;
 			}
 
 			/* verify the write -- must do this in order for
@@ -1321,7 +1321,7 @@ static int download_fw(struct edgeport_serial *serial)
 				kfree(header);
 				kfree(rom_desc);
 				kfree(ti_manuf_desc);
-				return status;
+				return -EINVAL;
 			}
 
 			kfree(vheader);
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index 28913fa..4735931 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -534,7 +534,6 @@ static struct usb_device_id ipaq_id_table [] = {
 	{ USB_DEVICE(0x413C, 0x4009) }, /* Dell Axim USB Sync */
 	{ USB_DEVICE(0x4505, 0x0010) }, /* Smartphone */
 	{ USB_DEVICE(0x5E04, 0xCE00) }, /* SAGEM Wireless Assistant */
-	{ USB_DEVICE(0x0BB4, 0x00CF) }, /* HTC smartphone modems */
 	{ }                             /* Terminating entry */
 };
 
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index 55766a6..12ed594 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -1,6 +1,8 @@
 /*
  * Infinity Unlimited USB Phoenix driver
  *
+ * Copyright (C) 2010 James Courtier-Dutton (James@superbug.co.uk)
+
  * Copyright (C) 2007 Alain Degreffe (eczema@ecze.com)
  *
  * Original code taken from iuutool (Copyright (C) 2006 Juan Carlos Borrás)
@@ -40,7 +42,7 @@ static int debug;
 /*
  * Version Information
  */
-#define DRIVER_VERSION "v0.11"
+#define DRIVER_VERSION "v0.12"
 #define DRIVER_DESC "Infinity USB Unlimited Phoenix driver"
 
 static const struct usb_device_id id_table[] = {
@@ -81,6 +83,9 @@ struct iuu_private {
 	u8 *dbgbuf;		/* debug buffer */
 	u8 len;
 	int vcc;		/* vcc (either 3 or 5 V) */
+	u32 baud;
+	u32 boost;
+	u32 clk;
 };
 
 
@@ -157,13 +162,14 @@ static int iuu_tiocmset(struct tty_struct *tty, struct file *file,
 	    port->number, set, clear);
 
 	spin_lock_irqsave(&priv->lock, flags);
-	if (set & TIOCM_RTS)
-		priv->tiostatus = TIOCM_RTS;
 
-	if (!(set & TIOCM_RTS) && priv->tiostatus == TIOCM_RTS) {
+	if ((set & TIOCM_RTS) && !(priv->tiostatus == TIOCM_RTS)) {
 		dbg("%s TIOCMSET RESET called !!!", __func__);
 		priv->reset = 1;
 	}
+	if (set & TIOCM_RTS)
+		priv->tiostatus = TIOCM_RTS;
+
 	spin_unlock_irqrestore(&priv->lock, flags);
 	return 0;
 }
@@ -850,20 +856,24 @@ static int iuu_uart_off(struct usb_serial_port *port)
 	return status;
 }
 
-static int iuu_uart_baud(struct usb_serial_port *port, u32 baud,
+static int iuu_uart_baud(struct usb_serial_port *port, u32 baud_base,
 			 u32 *actual, u8 parity)
 {
 	int status;
+	u32 baud;
 	u8 *dataout;
 	u8 DataCount = 0;
 	u8 T1Frekvens = 0;
 	u8 T1reload = 0;
 	unsigned int T1FrekvensHZ = 0;
 
+	dbg("%s - enter baud_base=%d", __func__, baud_base);
 	dataout = kmalloc(sizeof(u8) * 5, GFP_KERNEL);
 
 	if (!dataout)
 		return -ENOMEM;
+	/*baud = (((priv->clk / 35) * baud_base) / 100000); */
+	baud = baud_base;
 
 	if (baud < 1200 || baud > 230400) {
 		kfree(dataout);
@@ -947,15 +957,20 @@ static void iuu_set_termios(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ktermios *old_termios)
 {
 	const u32 supported_mask = CMSPAR|PARENB|PARODD;
-
+	struct iuu_private *priv = usb_get_serial_port_data(port);
 	unsigned int cflag = tty->termios->c_cflag;
 	int status;
 	u32 actual;
 	u32 parity;
 	int csize = CS7;
-	int baud = 9600;	/* Fixed for the moment */
+	int baud;
 	u32 newval = cflag & supported_mask;
 
+	/* Just use the ospeed. ispeed should be the same. */
+	baud = tty->termios->c_ospeed;
+
+	dbg("%s - enter c_ospeed or baud=%d", __func__, baud);
+
 	/* compute the parity parameter */
 	parity = 0;
 	if (cflag & CMSPAR) {	/* Using mark space */
@@ -975,15 +990,15 @@ static void iuu_set_termios(struct tty_struct *tty,
 
 	/* set it */
 	status = iuu_uart_baud(port,
-			(clockmode == 2) ? 16457 : 9600 * boost / 100,
+			baud * priv->boost / 100,
 			&actual, parity);
 
 	/* set the termios value to the real one, so the user now what has
 	 * changed. We support few fields so its easies to copy the old hw
 	 * settings back over and then adjust them
 	 */
- 	if (old_termios)
- 		tty_termios_copy_hw(tty->termios, old_termios);
+	if (old_termios)
+		tty_termios_copy_hw(tty->termios, old_termios);
 	if (status != 0)	/* Set failed - return old bits */
 		return;
 	/* Re-encode speed, parity and csize */
@@ -1017,6 +1032,7 @@ static void iuu_close(struct usb_serial_port *port)
 
 static void iuu_init_termios(struct tty_struct *tty)
 {
+	dbg("%s - enter", __func__);
 	*(tty->termios) = tty_std_termios;
 	tty->termios->c_cflag = CLOCAL | CREAD | CS8 | B9600
 				| TIOCM_CTS | CSTOPB | PARENB;
@@ -1032,10 +1048,16 @@ static int iuu_open(struct tty_struct *tty, struct usb_serial_port *port)
 	struct usb_serial *serial = port->serial;
 	u8 *buf;
 	int result;
+	int baud;
 	u32 actual;
 	struct iuu_private *priv = usb_get_serial_port_data(port);
 
-	dbg("%s -  port %d", __func__, port->number);
+	baud = tty->termios->c_ospeed;
+	tty->termios->c_ispeed = baud;
+	/* Re-encode speed */
+	tty_encode_baud_rate(tty, baud, baud);
+
+	dbg("%s -  port %d, baud %d", __func__, port->number, baud);
 	usb_clear_halt(serial->dev, port->write_urb->pipe);
 	usb_clear_halt(serial->dev, port->read_urb->pipe);
 
@@ -1070,23 +1092,29 @@ static int iuu_open(struct tty_struct *tty, struct usb_serial_port *port)
 	iuu_uart_on(port);
 	if (boost < 100)
 		boost = 100;
+	priv->boost = boost;
+	priv->baud = baud;
 	switch (clockmode) {
 	case 2:		/*  3.680 Mhz */
+		priv->clk = IUU_CLK_3680000;
 		iuu_clk(port, IUU_CLK_3680000 * boost / 100);
 		result =
-		    iuu_uart_baud(port, 9600 * boost / 100, &actual,
+		    iuu_uart_baud(port, baud * boost / 100, &actual,
 				  IUU_PARITY_EVEN);
 		break;
 	case 3:		/*  6.00 Mhz */
 		iuu_clk(port, IUU_CLK_6000000 * boost / 100);
+		priv->clk = IUU_CLK_6000000;
+		/* Ratio of 6000000 to 3500000 for baud 9600 */
 		result =
 		    iuu_uart_baud(port, 16457 * boost / 100, &actual,
 				  IUU_PARITY_EVEN);
 		break;
 	default:		/*  3.579 Mhz */
 		iuu_clk(port, IUU_CLK_3579000 * boost / 100);
+		priv->clk = IUU_CLK_3579000;
 		result =
-		    iuu_uart_baud(port, 9600 * boost / 100, &actual,
+		    iuu_uart_baud(port, baud * boost / 100, &actual,
 				  IUU_PARITY_EVEN);
 	}
 
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 5cd30e4..9fc6ea2 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -145,7 +145,10 @@ static void option_instat_callback(struct urb *urb);
 #define HUAWEI_PRODUCT_E143D			0x143D
 #define HUAWEI_PRODUCT_E143E			0x143E
 #define HUAWEI_PRODUCT_E143F			0x143F
+#define HUAWEI_PRODUCT_K4505			0x1464
+#define HUAWEI_PRODUCT_K3765			0x1465
 #define HUAWEI_PRODUCT_E14AC			0x14AC
+#define HUAWEI_PRODUCT_ETS1220			0x1803
 
 #define QUANTA_VENDOR_ID			0x0408
 #define QUANTA_PRODUCT_Q101			0xEA02
@@ -264,9 +267,6 @@ static void option_instat_callback(struct urb *urb);
 #define BANDRICH_PRODUCT_1011			0x1011
 #define BANDRICH_PRODUCT_1012			0x1012
 
-#define AMOI_VENDOR_ID			0x1614
-#define AMOI_PRODUCT_9508			0x0800
-
 #define QUALCOMM_VENDOR_ID			0x05C6
 
 #define CMOTECH_VENDOR_ID			0x16d8
@@ -482,8 +482,10 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143D, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143E, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143F, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4505, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_ETS1220, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E14AC) },
-	{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_9508) },
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V640) }, /* Novatel Merlin V640/XV620 */
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V620) }, /* Novatel Merlin V620/S620 */
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V740) }, /* Novatel Merlin EX720/V740/X720 */
@@ -1017,6 +1019,13 @@ static int option_probe(struct usb_serial *serial,
 		serial->interface->cur_altsetting->desc.bInterfaceClass != 0xff)
 		return -ENODEV;
 
+	/* Don't bind network interfaces on Huawei K3765 & K4505 */
+	if (serial->dev->descriptor.idVendor == HUAWEI_VENDOR_ID &&
+		(serial->dev->descriptor.idProduct == HUAWEI_PRODUCT_K3765 ||
+			serial->dev->descriptor.idProduct == HUAWEI_PRODUCT_K4505) &&
+		serial->interface->cur_altsetting->desc.bInterfaceNumber == 1)
+		return -ENODEV;
+
 	data = serial->private = kzalloc(sizeof(struct usb_wwan_intf_private), GFP_KERNEL);
 
 	if (!data)
diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c
new file mode 100644
index 0000000..6e82d4f
--- /dev/null
+++ b/drivers/usb/serial/ssu100.c
@@ -0,0 +1,698 @@
+/*
+ * usb-serial driver for Quatech SSU-100
+ *
+ * based on ftdi_sio.c and the original serqt_usb.c from Quatech
+ *
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/serial.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include <linux/uaccess.h>
+
+#define QT_OPEN_CLOSE_CHANNEL       0xca
+#define QT_SET_GET_DEVICE           0xc2
+#define QT_SET_GET_REGISTER         0xc0
+#define QT_GET_SET_PREBUF_TRIG_LVL  0xcc
+#define QT_SET_ATF                  0xcd
+#define QT_GET_SET_UART             0xc1
+#define QT_TRANSFER_IN              0xc0
+#define QT_HW_FLOW_CONTROL_MASK     0xc5
+#define QT_SW_FLOW_CONTROL_MASK     0xc6
+
+#define MODEM_CTL_REGISTER         0x04
+#define MODEM_STATUS_REGISTER      0x06
+
+
+#define SERIAL_LSR_OE       0x02
+#define SERIAL_LSR_PE       0x04
+#define SERIAL_LSR_FE       0x08
+#define SERIAL_LSR_BI       0x10
+
+#define SERIAL_LSR_TEMT     0x40
+
+#define  SERIAL_MCR_DTR             0x01
+#define  SERIAL_MCR_RTS             0x02
+#define  SERIAL_MCR_LOOP            0x10
+
+#define  SERIAL_MSR_CTS             0x10
+#define  SERIAL_MSR_CD              0x80
+#define  SERIAL_MSR_RI              0x40
+#define  SERIAL_MSR_DSR             0x20
+#define  SERIAL_MSR_MASK            0xf0
+
+#define  SERIAL_CRTSCTS ((SERIAL_MCR_RTS << 8) | SERIAL_MSR_CTS)
+
+#define  SERIAL_8_DATA              0x03
+#define  SERIAL_7_DATA              0x02
+#define  SERIAL_6_DATA              0x01
+#define  SERIAL_5_DATA              0x00
+
+#define  SERIAL_ODD_PARITY          0X08
+#define  SERIAL_EVEN_PARITY         0X18
+
+#define  MAX_BAUD_RATE              460800
+
+#define ATC_DISABLED                0x00
+#define DUPMODE_BITS        0xc0
+#define RR_BITS             0x03
+#define LOOPMODE_BITS       0x41
+#define RS232_MODE          0x00
+#define RTSCTS_TO_CONNECTOR 0x40
+#define CLKS_X4             0x02
+#define FULLPWRBIT          0x00000080
+#define NEXT_BOARD_POWER_BIT        0x00000004
+
+static int debug = 1;
+
+/* Version Information */
+#define DRIVER_VERSION "v0.1"
+#define DRIVER_DESC "Quatech SSU-100 USB to Serial Driver"
+
+#define	USB_VENDOR_ID_QUATECH	0x061d	/* Quatech VID */
+#define QUATECH_SSU100	0xC020	/* SSU100 */
+
+static const struct usb_device_id id_table[] = {
+	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_SSU100)},
+	{}			/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, id_table);
+
+
+static struct usb_driver ssu100_driver = {
+	.name			       = "ssu100",
+	.probe			       = usb_serial_probe,
+	.disconnect		       = usb_serial_disconnect,
+	.id_table		       = id_table,
+	.suspend		       = usb_serial_suspend,
+	.resume			       = usb_serial_resume,
+	.no_dynamic_id		       = 1,
+	.supports_autosuspend	       = 1,
+};
+
+struct ssu100_port_private {
+	u8 shadowLSR;
+	u8 shadowMSR;
+	wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */
+	unsigned short max_packet_size;
+};
+
+static void ssu100_release(struct usb_serial *serial)
+{
+	struct ssu100_port_private *priv = usb_get_serial_port_data(*serial->port);
+
+	dbg("%s", __func__);
+	kfree(priv);
+}
+
+static inline int ssu100_control_msg(struct usb_device *dev,
+				     u8 request, u16 data, u16 index)
+{
+	return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+			       request, 0x40, data, index,
+			       NULL, 0, 300);
+}
+
+static inline int ssu100_setdevice(struct usb_device *dev, u8 *data)
+{
+	u16 x = ((u16)(data[1] << 8) | (u16)(data[0]));
+
+	return ssu100_control_msg(dev, QT_SET_GET_DEVICE, x, 0);
+}
+
+
+static inline int ssu100_getdevice(struct usb_device *dev, u8 *data)
+{
+	return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+			       QT_SET_GET_DEVICE, 0xc0, 0, 0,
+			       data, 3, 300);
+}
+
+static inline int ssu100_getregister(struct usb_device *dev,
+				     unsigned short uart,
+				     unsigned short reg,
+				     u8 *data)
+{
+	return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+			       QT_SET_GET_REGISTER, 0xc0, reg,
+			       uart, data, sizeof(*data), 300);
+
+}
+
+
+static inline int ssu100_setregister(struct usb_device *dev,
+				     unsigned short uart,
+				     u16 data)
+{
+	u16 value = (data << 8) | MODEM_CTL_REGISTER;
+
+	return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+			       QT_SET_GET_REGISTER, 0x40, value, uart,
+			       NULL, 0, 300);
+
+}
+
+#define set_mctrl(dev, set)		update_mctrl((dev), (set), 0)
+#define clear_mctrl(dev, clear)	update_mctrl((dev), 0, (clear))
+
+/* these do not deal with device that have more than 1 port */
+static inline int update_mctrl(struct usb_device *dev, unsigned int set,
+			       unsigned int clear)
+{
+	unsigned urb_value;
+	int result;
+
+	if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) {
+		dbg("%s - DTR|RTS not being set|cleared", __func__);
+		return 0;	/* no change */
+	}
+
+	clear &= ~set;	/* 'set' takes precedence over 'clear' */
+	urb_value = 0;
+	if (set & TIOCM_DTR)
+		urb_value |= SERIAL_MCR_DTR;
+	if (set & TIOCM_RTS)
+		urb_value |= SERIAL_MCR_RTS;
+
+	result = ssu100_setregister(dev, 0, urb_value);
+	if (result < 0)
+		dbg("%s Error from MODEM_CTRL urb", __func__);
+
+	return result;
+}
+
+static int ssu100_initdevice(struct usb_device *dev)
+{
+	u8 *data;
+	int result = 0;
+
+	dbg("%s", __func__);
+
+	data = kzalloc(3, GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	result = ssu100_getdevice(dev, data);
+	if (result < 0) {
+		dbg("%s - get_device failed %i", __func__, result);
+		goto out;
+	}
+
+	data[1] &= ~FULLPWRBIT;
+
+	result = ssu100_setdevice(dev, data);
+	if (result < 0) {
+		dbg("%s - setdevice failed %i", __func__, result);
+		goto out;
+	}
+
+	result = ssu100_control_msg(dev, QT_GET_SET_PREBUF_TRIG_LVL, 128, 0);
+	if (result < 0) {
+		dbg("%s - set prebuffer level failed %i", __func__, result);
+		goto out;
+	}
+
+	result = ssu100_control_msg(dev, QT_SET_ATF, ATC_DISABLED, 0);
+	if (result < 0) {
+		dbg("%s - set ATFprebuffer level failed %i", __func__, result);
+		goto out;
+	}
+
+	result = ssu100_getdevice(dev, data);
+	if (result < 0) {
+		dbg("%s - get_device failed %i", __func__, result);
+		goto out;
+	}
+
+	data[0] &= ~(RR_BITS | DUPMODE_BITS);
+	data[0] |= CLKS_X4;
+	data[1] &= ~(LOOPMODE_BITS);
+	data[1] |= RS232_MODE;
+
+	result = ssu100_setdevice(dev, data);
+	if (result < 0) {
+		dbg("%s - setdevice failed %i", __func__, result);
+		goto out;
+	}
+
+out:	kfree(data);
+	return result;
+
+}
+
+
+static void ssu100_set_termios(struct tty_struct *tty,
+			       struct usb_serial_port *port,
+			       struct ktermios *old_termios)
+{
+	struct usb_device *dev = port->serial->dev;
+	struct ktermios *termios = tty->termios;
+	u16 baud, divisor, remainder;
+	unsigned int cflag = termios->c_cflag;
+	u16 urb_value = 0; /* will hold the new flags */
+	int result;
+
+	dbg("%s", __func__);
+
+	if (cflag & PARENB) {
+		if (cflag & PARODD)
+			urb_value |= SERIAL_ODD_PARITY;
+		else
+			urb_value |= SERIAL_EVEN_PARITY;
+	}
+
+	switch (cflag & CSIZE) {
+	case CS5:
+		urb_value |= SERIAL_5_DATA;
+		break;
+	case CS6:
+		urb_value |= SERIAL_6_DATA;
+		break;
+	case CS7:
+		urb_value |= SERIAL_7_DATA;
+		break;
+	default:
+	case CS8:
+		urb_value |= SERIAL_8_DATA;
+		break;
+	}
+
+	baud = tty_get_baud_rate(tty);
+	if (!baud)
+		baud = 9600;
+
+	dbg("%s - got baud = %d\n", __func__, baud);
+
+
+	divisor = MAX_BAUD_RATE / baud;
+	remainder = MAX_BAUD_RATE % baud;
+	if (((remainder * 2) >= baud) && (baud != 110))
+		divisor++;
+
+	urb_value = urb_value << 8;
+
+	result = ssu100_control_msg(dev, QT_GET_SET_UART, divisor, urb_value);
+	if (result < 0)
+		dbg("%s - set uart failed", __func__);
+
+	if (cflag & CRTSCTS)
+		result = ssu100_control_msg(dev, QT_HW_FLOW_CONTROL_MASK,
+					    SERIAL_CRTSCTS, 0);
+	else
+		result = ssu100_control_msg(dev, QT_HW_FLOW_CONTROL_MASK,
+					    0, 0);
+	if (result < 0)
+		dbg("%s - set HW flow control failed", __func__);
+
+	if (I_IXOFF(tty) || I_IXON(tty)) {
+		u16 x = ((u16)(START_CHAR(tty) << 8) | (u16)(STOP_CHAR(tty)));
+
+		result = ssu100_control_msg(dev, QT_SW_FLOW_CONTROL_MASK,
+					    x, 0);
+	} else
+		result = ssu100_control_msg(dev, QT_SW_FLOW_CONTROL_MASK,
+					    0, 0);
+
+	if (result < 0)
+		dbg("%s - set SW flow control failed", __func__);
+
+}
+
+
+static int ssu100_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	struct usb_device *dev = port->serial->dev;
+	struct ssu100_port_private *priv = usb_get_serial_port_data(port);
+	u8 *data;
+	int result;
+
+	dbg("%s - port %d", __func__, port->number);
+
+	data = kzalloc(2, GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+				 QT_OPEN_CLOSE_CHANNEL,
+				 QT_TRANSFER_IN, 0x01,
+				 0, data, 2, 300);
+	if (result < 0) {
+		dbg("%s - open failed %i", __func__, result);
+		kfree(data);
+		return result;
+	}
+
+	priv->shadowLSR = data[0]  & (SERIAL_LSR_OE | SERIAL_LSR_PE |
+				      SERIAL_LSR_FE | SERIAL_LSR_BI);
+
+	priv->shadowMSR = data[1]  & (SERIAL_MSR_CTS | SERIAL_MSR_DSR |
+				      SERIAL_MSR_RI | SERIAL_MSR_CD);
+
+	kfree(data);
+
+/* set to 9600 */
+	result = ssu100_control_msg(dev, QT_GET_SET_UART, 0x30, 0x0300);
+	if (result < 0)
+		dbg("%s - set uart failed", __func__);
+
+	if (tty)
+		ssu100_set_termios(tty, port, tty->termios);
+
+	return usb_serial_generic_open(tty, port);
+}
+
+static void ssu100_close(struct usb_serial_port *port)
+{
+	dbg("%s", __func__);
+	usb_serial_generic_close(port);
+}
+
+static int get_serial_info(struct usb_serial_port *port,
+			   struct serial_struct __user *retinfo)
+{
+	struct serial_struct tmp;
+
+	if (!retinfo)
+		return -EFAULT;
+
+	memset(&tmp, 0, sizeof(tmp));
+	tmp.line		= port->serial->minor;
+	tmp.port		= 0;
+	tmp.irq			= 0;
+	tmp.flags		= ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
+	tmp.xmit_fifo_size	= port->bulk_out_size;
+	tmp.baud_base		= 9600;
+	tmp.close_delay		= 5*HZ;
+	tmp.closing_wait	= 30*HZ;
+
+	if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
+		return -EFAULT;
+	return 0;
+}
+
+static int ssu100_ioctl(struct tty_struct *tty, struct file *file,
+		    unsigned int cmd, unsigned long arg)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct ssu100_port_private *priv = usb_get_serial_port_data(port);
+
+	dbg("%s cmd 0x%04x", __func__, cmd);
+
+	switch (cmd) {
+	case TIOCGSERIAL:
+		return get_serial_info(port,
+				       (struct serial_struct __user *) arg);
+
+	case TIOCMIWAIT:
+		while (priv != NULL) {
+			u8 prevMSR = priv->shadowMSR & SERIAL_MSR_MASK;
+			interruptible_sleep_on(&priv->delta_msr_wait);
+			/* see if a signal did it */
+			if (signal_pending(current))
+				return -ERESTARTSYS;
+			else {
+				u8 diff = (priv->shadowMSR & SERIAL_MSR_MASK) ^ prevMSR;
+				if (!diff)
+					return -EIO; /* no change => error */
+
+				/* Return 0 if caller wanted to know about
+				   these bits */
+
+				if (((arg & TIOCM_RNG) && (diff & SERIAL_MSR_RI)) ||
+				    ((arg & TIOCM_DSR) && (diff & SERIAL_MSR_DSR)) ||
+				    ((arg & TIOCM_CD) && (diff & SERIAL_MSR_CD)) ||
+				    ((arg & TIOCM_CTS) && (diff & SERIAL_MSR_CTS)))
+					return 0;
+			}
+		}
+		return 0;
+
+	default:
+		break;
+	}
+
+	dbg("%s arg not supported", __func__);
+
+	return -ENOIOCTLCMD;
+}
+
+static void ssu100_set_max_packet_size(struct usb_serial_port *port)
+{
+	struct ssu100_port_private *priv = usb_get_serial_port_data(port);
+	struct usb_serial *serial = port->serial;
+	struct usb_device *udev = serial->dev;
+
+	struct usb_interface *interface = serial->interface;
+	struct usb_endpoint_descriptor *ep_desc = &interface->cur_altsetting->endpoint[1].desc;
+
+	unsigned num_endpoints;
+	int i;
+
+	num_endpoints = interface->cur_altsetting->desc.bNumEndpoints;
+	dev_info(&udev->dev, "Number of endpoints %d\n", num_endpoints);
+
+	for (i = 0; i < num_endpoints; i++) {
+		dev_info(&udev->dev, "Endpoint %d MaxPacketSize %d\n", i+1,
+			interface->cur_altsetting->endpoint[i].desc.wMaxPacketSize);
+		ep_desc = &interface->cur_altsetting->endpoint[i].desc;
+	}
+
+	/* set max packet size based on descriptor */
+	priv->max_packet_size = ep_desc->wMaxPacketSize;
+
+	dev_info(&udev->dev, "Setting MaxPacketSize %d\n", priv->max_packet_size);
+}
+
+static int ssu100_attach(struct usb_serial *serial)
+{
+	struct ssu100_port_private *priv;
+	struct usb_serial_port *port = *serial->port;
+
+	dbg("%s", __func__);
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv) {
+		dev_err(&port->dev, "%s- kmalloc(%Zd) failed.\n", __func__,
+			sizeof(*priv));
+		return -ENOMEM;
+	}
+
+	init_waitqueue_head(&priv->delta_msr_wait);
+	usb_set_serial_port_data(port, priv);
+
+	ssu100_set_max_packet_size(port);
+
+	return ssu100_initdevice(serial->dev);
+}
+
+static int ssu100_tiocmget(struct tty_struct *tty, struct file *file)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct usb_device *dev = port->serial->dev;
+	u8 *d;
+	int r;
+
+	dbg("%s\n", __func__);
+
+	d = kzalloc(2, GFP_KERNEL);
+	if (!d)
+		return -ENOMEM;
+
+	r = ssu100_getregister(dev, 0, MODEM_CTL_REGISTER, d);
+	if (r < 0)
+		goto mget_out;
+
+	r = ssu100_getregister(dev, 0, MODEM_STATUS_REGISTER, d+1);
+	if (r < 0)
+		goto mget_out;
+
+	r = (d[0] & SERIAL_MCR_DTR ? TIOCM_DTR : 0) |
+		(d[0] & SERIAL_MCR_RTS ? TIOCM_RTS : 0) |
+		(d[1] & SERIAL_MSR_CTS ? TIOCM_CTS : 0) |
+		(d[1] & SERIAL_MSR_CD ? TIOCM_CAR : 0) |
+		(d[1] & SERIAL_MSR_RI ? TIOCM_RI : 0) |
+		(d[1] & SERIAL_MSR_DSR ? TIOCM_DSR : 0);
+
+mget_out:
+	kfree(d);
+	return r;
+}
+
+static int ssu100_tiocmset(struct tty_struct *tty, struct file *file,
+			   unsigned int set, unsigned int clear)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct usb_device *dev = port->serial->dev;
+
+	dbg("%s\n", __func__);
+	return update_mctrl(dev, set, clear);
+}
+
+static void ssu100_dtr_rts(struct usb_serial_port *port, int on)
+{
+	struct usb_device *dev = port->serial->dev;
+
+	dbg("%s\n", __func__);
+
+	mutex_lock(&port->serial->disc_mutex);
+	if (!port->serial->disconnected) {
+		/* Disable flow control */
+		if (!on &&
+		    ssu100_setregister(dev, 0, 0) < 0)
+			dev_err(&port->dev, "error from flowcontrol urb\n");
+		/* drop RTS and DTR */
+		if (on)
+			set_mctrl(dev, TIOCM_DTR | TIOCM_RTS);
+		else
+			clear_mctrl(dev, TIOCM_DTR | TIOCM_RTS);
+	}
+	mutex_unlock(&port->serial->disc_mutex);
+}
+
+static int ssu100_process_packet(struct tty_struct *tty,
+				 struct usb_serial_port *port,
+				 struct ssu100_port_private *priv,
+				 char *packet, int len)
+{
+	int i;
+	char flag;
+	char *ch;
+
+	dbg("%s - port %d", __func__, port->number);
+
+	if (len < 4) {
+		dbg("%s - malformed packet", __func__);
+		return 0;
+	}
+
+	if ((packet[0] == 0x1b) && (packet[1] == 0x1b) &&
+	    ((packet[2] == 0x00) || (packet[2] == 0x01))) {
+		if (packet[2] == 0x00)
+			priv->shadowLSR = packet[3] & (SERIAL_LSR_OE |
+						       SERIAL_LSR_PE |
+						       SERIAL_LSR_FE |
+						       SERIAL_LSR_BI);
+
+		if (packet[2] == 0x01) {
+			priv->shadowMSR = packet[3];
+			wake_up_interruptible(&priv->delta_msr_wait);
+		}
+
+		len -= 4;
+		ch = packet + 4;
+	} else
+		ch = packet;
+
+	if (!len)
+		return 0;	/* status only */
+
+	if (port->port.console && port->sysrq) {
+		for (i = 0; i < len; i++, ch++) {
+			if (!usb_serial_handle_sysrq_char(tty, port, *ch))
+				tty_insert_flip_char(tty, *ch, flag);
+		}
+	} else
+		tty_insert_flip_string_fixed_flag(tty, ch, flag, len);
+
+	return len;
+}
+
+static void ssu100_process_read_urb(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	struct ssu100_port_private *priv = usb_get_serial_port_data(port);
+	char *data = (char *)urb->transfer_buffer;
+	struct tty_struct *tty;
+	int count = 0;
+	int i;
+	int len;
+
+	dbg("%s", __func__);
+
+	tty = tty_port_tty_get(&port->port);
+	if (!tty)
+		return;
+
+	for (i = 0; i < urb->actual_length; i += priv->max_packet_size) {
+		len = min_t(int, urb->actual_length - i, priv->max_packet_size);
+		count += ssu100_process_packet(tty, port, priv, &data[i], len);
+	}
+
+	if (count)
+		tty_flip_buffer_push(tty);
+	tty_kref_put(tty);
+}
+
+
+static struct usb_serial_driver ssu100_device = {
+	.driver = {
+		.owner = THIS_MODULE,
+		.name = "ssu100",
+	},
+	.description	     = DRIVER_DESC,
+	.id_table	     = id_table,
+	.usb_driver	     = &ssu100_driver,
+	.num_ports	     = 1,
+	.bulk_in_size        = 256,
+	.bulk_out_size       = 256,
+	.open		     = ssu100_open,
+	.close		     = ssu100_close,
+	.attach              = ssu100_attach,
+	.release             = ssu100_release,
+	.dtr_rts             = ssu100_dtr_rts,
+	.process_read_urb    = ssu100_process_read_urb,
+	.tiocmget            = ssu100_tiocmget,
+	.tiocmset            = ssu100_tiocmset,
+	.ioctl               = ssu100_ioctl,
+	.set_termios         = ssu100_set_termios,
+};
+
+static int __init ssu100_init(void)
+{
+	int retval;
+
+	dbg("%s", __func__);
+
+	/* register with usb-serial */
+	retval = usb_serial_register(&ssu100_device);
+
+	if (retval)
+		goto failed_usb_sio_register;
+
+	retval = usb_register(&ssu100_driver);
+	if (retval)
+		goto failed_usb_register;
+
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
+
+	return 0;
+
+failed_usb_register:
+	usb_serial_deregister(&ssu100_device);
+failed_usb_sio_register:
+	return retval;
+}
+
+static void __exit ssu100_exit(void)
+{
+	usb_deregister(&ssu100_driver);
+	usb_serial_deregister(&ssu100_device);
+}
+
+module_init(ssu100_init);
+module_exit(ssu100_exit);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug enabled or not");
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 941c2d4..2a982e6 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -653,6 +653,7 @@ exit:
 	return id;
 }
 
+/* Caller must hold table_lock */
 static struct usb_serial_driver *search_serial_device(
 					struct usb_interface *iface)
 {
@@ -718,17 +719,23 @@ int usb_serial_probe(struct usb_interface *interface,
 	int num_ports = 0;
 	int max_endpoints;
 
-	lock_kernel(); /* guard against unloading a serial driver module */
+	mutex_lock(&table_lock);
 	type = search_serial_device(interface);
 	if (!type) {
-		unlock_kernel();
+		mutex_unlock(&table_lock);
 		dbg("none matched");
 		return -ENODEV;
 	}
 
+	if (!try_module_get(type->driver.owner)) {
+		mutex_unlock(&table_lock);
+		dev_err(&interface->dev, "module get failed, exiting\n");
+		return -EIO;
+	}
+	mutex_unlock(&table_lock);
+
 	serial = create_serial(dev, interface, type);
 	if (!serial) {
-		unlock_kernel();
 		dev_err(&interface->dev, "%s - out of memory\n", __func__);
 		return -ENOMEM;
 	}
@@ -737,20 +744,11 @@ int usb_serial_probe(struct usb_interface *interface,
 	if (type->probe) {
 		const struct usb_device_id *id;
 
-		if (!try_module_get(type->driver.owner)) {
-			unlock_kernel();
-			dev_err(&interface->dev,
-				"module get failed, exiting\n");
-			kfree(serial);
-			return -EIO;
-		}
-
 		id = get_iface_id(type, interface);
 		retval = type->probe(serial, id);
 		module_put(type->driver.owner);
 
 		if (retval) {
-			unlock_kernel();
 			dbg("sub driver rejected device");
 			kfree(serial);
 			return retval;
@@ -822,7 +820,6 @@ int usb_serial_probe(struct usb_interface *interface,
 		 * properly during a later invocation of usb_serial_probe
 		 */
 		if (num_bulk_in == 0 || num_bulk_out == 0) {
-			unlock_kernel();
 			dev_info(&interface->dev, "PL-2303 hack: descriptors matched but endpoints did not\n");
 			kfree(serial);
 			return -ENODEV;
@@ -835,7 +832,6 @@ int usb_serial_probe(struct usb_interface *interface,
 	if (type == &usb_serial_generic_device) {
 		num_ports = num_bulk_out;
 		if (num_ports == 0) {
-			unlock_kernel();
 			dev_err(&interface->dev,
 			    "Generic device with no bulk out, not allowed.\n");
 			kfree(serial);
@@ -847,7 +843,6 @@ int usb_serial_probe(struct usb_interface *interface,
 		/* if this device type has a calc_num_ports function, call it */
 		if (type->calc_num_ports) {
 			if (!try_module_get(type->driver.owner)) {
-				unlock_kernel();
 				dev_err(&interface->dev,
 					"module get failed, exiting\n");
 				kfree(serial);
@@ -878,7 +873,6 @@ int usb_serial_probe(struct usb_interface *interface,
 	max_endpoints = max(max_endpoints, num_interrupt_out);
 	max_endpoints = max(max_endpoints, (int)serial->num_ports);
 	serial->num_port_pointers = max_endpoints;
-	unlock_kernel();
 
 	dbg("%s - setting up %d port structures for this device",
 						__func__, max_endpoints);
@@ -1077,6 +1071,8 @@ int usb_serial_probe(struct usb_interface *interface,
 		dev_set_name(&port->dev, "ttyUSB%d", port->number);
 		dbg ("%s - registering %s", __func__, dev_name(&port->dev));
 		port->dev_state = PORT_REGISTERING;
+		device_enable_async_suspend(&port->dev);
+
 		retval = device_add(&port->dev);
 		if (retval) {
 			dev_err(&port->dev, "Error registering port device, "
@@ -1349,6 +1345,7 @@ int usb_serial_register(struct usb_serial_driver *driver)
 		driver->description = driver->driver.name;
 
 	/* Add this device to our list of devices */
+	mutex_lock(&table_lock);
 	list_add(&driver->driver_list, &usb_serial_driver_list);
 
 	retval = usb_serial_bus_register(driver);
@@ -1360,6 +1357,7 @@ int usb_serial_register(struct usb_serial_driver *driver)
 		printk(KERN_INFO "USB Serial support registered for %s\n",
 						driver->description);
 
+	mutex_unlock(&table_lock);
 	return retval;
 }
 EXPORT_SYMBOL_GPL(usb_serial_register);
@@ -1370,8 +1368,10 @@ void usb_serial_deregister(struct usb_serial_driver *device)
 	/* must be called with BKL held */
 	printk(KERN_INFO "USB Serial deregistering driver %s\n",
 	       device->description);
+	mutex_lock(&table_lock);
 	list_del(&device->driver_list);
 	usb_serial_bus_deregister(device);
+	mutex_unlock(&table_lock);
 }
 EXPORT_SYMBOL_GPL(usb_serial_deregister);
 
diff --git a/drivers/usb/storage/freecom.c b/drivers/usb/storage/freecom.c
index 54cc942..6542ca4 100644
--- a/drivers/usb/storage/freecom.c
+++ b/drivers/usb/storage/freecom.c
@@ -269,7 +269,7 @@ static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us)
 	/* The firmware will time-out commands after 20 seconds. Some commands
 	 * can legitimately take longer than this, so we use a different
 	 * command that only waits for the interrupt and then sends status,
-	 * without having to send a new ATAPI command to the device. 
+	 * without having to send a new ATAPI command to the device.
 	 *
 	 * NOTE: There is some indication that a data transfer after a timeout
 	 * may not work, but that is a condition that should never happen.
@@ -324,14 +324,14 @@ static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us)
 
 	/* Find the length we desire to read. */
 	switch (srb->cmnd[0]) {
-		case INQUIRY:
-		case REQUEST_SENSE:		/* 16 or 18 bytes? spec says 18, lots of devices only have 16 */
-		case MODE_SENSE:
-		case MODE_SENSE_10:
-			length = le16_to_cpu(fst->Count);
-			break;
-		default:
-			length = scsi_bufflen(srb);
+	case INQUIRY:
+	case REQUEST_SENSE:	/* 16 or 18 bytes? spec says 18, lots of devices only have 16 */
+	case MODE_SENSE:
+	case MODE_SENSE_10:
+		length = le16_to_cpu(fst->Count);
+		break;
+	default:
+		length = scsi_bufflen(srb);
 	}
 
 	/* verify that this amount is legal */
@@ -414,7 +414,7 @@ static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us)
 		/* should never hit here -- filtered in usb.c */
 		US_DEBUGP ("freecom unimplemented direction: %d\n",
 				us->srb->sc_data_direction);
-		// Return fail, SCSI seems to handle this better.
+		/* Return fail, SCSI seems to handle this better. */
 		return USB_STOR_TRANSPORT_FAILED;
 		break;
 	}
@@ -494,8 +494,7 @@ static void pdump (void *ibuffer, int length)
 				offset = 0;
 			}
 			offset += sprintf (line+offset, "%08x:", i);
-		}
-		else if ((i & 7) == 0) {
+		} else if ((i & 7) == 0) {
 			offset += sprintf (line+offset, " -");
 		}
 		offset += sprintf (line+offset, " %02x", buffer[i] & 0xff);
diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c
index e9cbc14..6b9982c 100644
--- a/drivers/usb/storage/isd200.c
+++ b/drivers/usb/storage/isd200.c
@@ -1456,8 +1456,7 @@ static int isd200_init_info(struct us_data *us)
 	int retStatus = ISD200_GOOD;
 	struct isd200_info *info;
 
-	info = (struct isd200_info *)
-			kzalloc(sizeof(struct isd200_info), GFP_KERNEL);
+	info = kzalloc(sizeof(struct isd200_info), GFP_KERNEL);
 	if (!info)
 		retStatus = ISD200_ERROR;
 	else {
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index a7d0bf9..90bb017 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -336,6 +336,7 @@ static int usb_stor_control_thread(void * __us)
 		else {
 			US_DEBUG(usb_stor_show_command(us->srb));
 			us->proto_handler(us->srb, us);
+			usb_mark_last_busy(us->pusb_dev);
 		}
 
 		/* lock access to the state */
@@ -845,6 +846,7 @@ static int usb_stor_scan_thread(void * __us)
 		/* Should we unbind if no devices were detected? */
 	}
 
+	usb_autopm_put_interface(us->pusb_intf);
 	complete_and_exit(&us->scanning_done, 0);
 }
 
@@ -968,6 +970,7 @@ int usb_stor_probe2(struct us_data *us)
 		goto BadDevice;
 	}
 
+	usb_autopm_get_interface_no_resume(us->pusb_intf);
 	wake_up_process(th);
 
 	return 0;
@@ -1040,6 +1043,7 @@ static struct usb_driver usb_storage_driver = {
 	.pre_reset =	usb_stor_pre_reset,
 	.post_reset =	usb_stor_post_reset,
 	.id_table =	usb_storage_usb_ids,
+	.supports_autosuspend = 1,
 	.soft_unbind =	1,
 };
 
diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c
index d110588..552679b 100644
--- a/drivers/usb/usb-skeleton.c
+++ b/drivers/usb/usb-skeleton.c
@@ -142,7 +142,7 @@ static int skel_release(struct inode *inode, struct file *file)
 {
 	struct usb_skel *dev;
 
-	dev = (struct usb_skel *)file->private_data;
+	dev = file->private_data;
 	if (dev == NULL)
 		return -ENODEV;
 
@@ -162,7 +162,7 @@ static int skel_flush(struct file *file, fl_owner_t id)
 	struct usb_skel *dev;
 	int res;
 
-	dev = (struct usb_skel *)file->private_data;
+	dev = file->private_data;
 	if (dev == NULL)
 		return -ENODEV;
 
@@ -246,7 +246,7 @@ static ssize_t skel_read(struct file *file, char *buffer, size_t count,
 	int rv;
 	bool ongoing_io;
 
-	dev = (struct usb_skel *)file->private_data;
+	dev = file->private_data;
 
 	/* if we cannot read at all, return EOF */
 	if (!dev->bulk_in_urb || !count)
@@ -401,7 +401,7 @@ static ssize_t skel_write(struct file *file, const char *user_buffer,
 	char *buf = NULL;
 	size_t writesize = min(count, (size_t)MAX_TRANSFER);
 
-	dev = (struct usb_skel *)file->private_data;
+	dev = file->private_data;
 
 	/* verify that we actually have some data to write */
 	if (count == 0)