diff options
author | Jesper Juhl <jesper.juhl@gmail.com> | 2007-10-16 23:30:57 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@woody.linux-foundation.org> | 2007-10-17 08:43:03 -0700 |
commit | 06f748c4754de4fe2fc8d517acf29cb46a0b2d60 (patch) | |
tree | bac644ae5bb370066de964cba5043d855be9a822 /drivers | |
parent | d2da272a4e581e831e3567a37ef167686f1ea1d3 (diff) | |
download | kernel_samsung_espresso10-06f748c4754de4fe2fc8d517acf29cb46a0b2d60.zip kernel_samsung_espresso10-06f748c4754de4fe2fc8d517acf29cb46a0b2d60.tar.gz kernel_samsung_espresso10-06f748c4754de4fe2fc8d517acf29cb46a0b2d60.tar.bz2 |
floppy: do a very minimal style cleanup of the floppy driver
Yes, some of this will likely be replaced in later patches, but I do not see
anyone else coming out of the woodwork with any patches for this driver, so
I'll ignore comments about churn. I want to get this driver cleaned up, and
if I'm going to do so I want to start with this basic style cleanup to reduce
the reading pain a bit.
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/block/floppy.c | 123 |
1 files changed, 73 insertions, 50 deletions
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index 72803a3..c6416f8 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -5,6 +5,7 @@ * Copyright (C) 1993, 1994 Alain Knaff * Copyright (C) 1998 Alan Cox */ + /* * 02.12.91 - Changed to static variables to indicate need for reset * and recalibrate. This makes some things easier (output_byte reset @@ -149,7 +150,7 @@ #define REALLY_SLOW_IO #define DEBUGT 2 -#define DCL_DEBUG /* debug disk change line */ +#define DCL_DEBUG /* debug disk change line */ /* do print messages for unexpected interrupts */ static int print_unex = 1; @@ -161,10 +162,8 @@ static int print_unex = 1; #include <linux/workqueue.h> #define FDPATCHES #include <linux/fdreg.h> - #include <linux/fd.h> #include <linux/hdreg.h> - #include <linux/errno.h> #include <linux/slab.h> #include <linux/mm.h> @@ -274,8 +273,7 @@ static inline void fallback_on_nodma_alloc(char **addr, size_t l) return; /* we have the memory */ if (can_use_virtual_dma != 2) return; /* no fallback allowed */ - printk - ("DMA memory shortage. Temporarily falling back on virtual DMA\n"); + printk("DMA memory shortage. Temporarily falling back on virtual DMA\n"); *addr = (char *)nodma_mem_alloc(l); #else return; @@ -291,8 +289,8 @@ static int initialising = 1; #define TOMINOR(x) ((x & 3) | ((x & 4) << 5)) #define UNIT(x) ((x) & 0x03) /* drive on fdc */ #define FDC(x) (((x) & 0x04) >> 2) /* fdc of drive */ + /* reverse mapping from unit and fdc to drive */ #define REVDRIVE(fdc, unit) ((unit) + ((fdc) << 2)) - /* reverse mapping from unit and fdc to drive */ #define DP (&drive_params[current_drive]) #define DRS (&drive_state[current_drive]) #define DRWE (&write_errors[current_drive]) @@ -356,7 +354,6 @@ static int inr; /* size of reply buffer, when called from interrupt */ #define R_HEAD (reply_buffer[4]) #define R_SECTOR (reply_buffer[5]) #define R_SIZECODE (reply_buffer[6]) - #define SEL_DLY (2*HZ/100) /* @@ -472,8 +469,8 @@ static struct floppy_struct floppy_type[32] = { { 6400,40,2,80,0,0x25,0x5B,0xCF,0x00,"E3200" }, /* 26 3.20MB 3.5" */ { 7040,44,2,80,0,0x25,0x5B,0xCF,0x00,"E3520" }, /* 27 3.52MB 3.5" */ { 7680,48,2,80,0,0x25,0x63,0xCF,0x00,"E3840" }, /* 28 3.84MB 3.5" */ - { 3680,23,2,80,0,0x1C,0x10,0xCF,0x00,"H1840" }, /* 29 1.84MB 3.5" */ + { 1600,10,2,80,0,0x25,0x02,0xDF,0x2E,"D800" }, /* 30 800KB 3.5" */ { 3200,20,2,80,0,0x1C,0x00,0xCF,0x2C,"H1600" }, /* 31 1.6MB 3.5" */ }; @@ -539,12 +536,12 @@ static char *floppy_track_buffer; static int max_buffer_sectors; static int *errors; -typedef void (*done_f) (int); +typedef void (*done_f)(int); static struct cont_t { - void (*interrupt) (void); /* this is called after the interrupt of the + void (*interrupt)(void); /* this is called after the interrupt of the * main command */ - void (*redo) (void); /* this is called to retry the operation */ - void (*error) (void); /* this is called to tally an error */ + void (*redo)(void); /* this is called to retry the operation */ + void (*error)(void); /* this is called to tally an error */ done_f done; /* this is called to say if the operation has * succeeded/failed */ } *cont; @@ -694,7 +691,6 @@ static void reschedule_timeout(int drive, const char *message, int marg) } #define INFBOUND(a,b) (a)=max_t(int, a, b) - #define SUPBOUND(a,b) (a)=min_t(int, a, b) /* @@ -733,6 +729,7 @@ static void reschedule_timeout(int drive, const char *message, int marg) static int disk_change(int drive) { int fdc = FDC(drive); + #ifdef FLOPPY_SANITY_CHECK if (time_before(jiffies, UDRS->select_date + UDP->select_delay)) DPRINT("WARNING disk change called early\n"); @@ -892,7 +889,6 @@ static int _lock_fdc(int drive, int interruptible, int line) set_current_state(TASK_RUNNING); remove_wait_queue(&fdc_wait, &wait); - flush_scheduled_work(); } command_status = FD_COMMAND_NONE; @@ -968,7 +964,9 @@ static void floppy_off(unsigned int drive) */ static void scandrives(void) { - int i, drive, saved_drive; + int i; + int drive; + int saved_drive; if (DP->select_delay) return; @@ -1146,7 +1144,9 @@ static void show_floppy(void); /* waits until the fdc becomes ready */ static int wait_til_ready(void) { - int counter, status; + int status; + int counter; + if (FDCS->reset) return -1; for (counter = 0; counter < 10000; counter++) { @@ -1193,7 +1193,8 @@ static int output_byte(char byte) /* gets the response from the fdc */ static int result(void) { - int i, status = 0; + int i; + int status = 0; for (i = 0; i < MAX_REPLIES; i++) { if ((status = wait_til_ready()) < 0) @@ -1226,6 +1227,7 @@ static int result(void) static int need_more_output(void) { int status; + if ((status = wait_til_ready()) < 0) return -1; if ((status & (STATUS_READY | STATUS_DIR | STATUS_DMA)) == STATUS_READY) @@ -1309,8 +1311,11 @@ static int fdc_configure(void) */ static void fdc_specify(void) { - unsigned char spec1, spec2; - unsigned long srt, hlt, hut; + unsigned char spec1; + unsigned char spec2; + unsigned long srt; + unsigned long hlt; + unsigned long hut; unsigned long dtr = NOMINAL_DTR; unsigned long scale_dtr = NOMINAL_DTR; int hlt_max_code = 0x7f; @@ -1472,7 +1477,6 @@ static int interpret_errors(void) tell_sector(); } printk("\n"); - } if (ST2 & ST2_WC || ST2 & ST2_BC) /* wrong cylinder => recal */ @@ -1498,7 +1502,10 @@ static int interpret_errors(void) */ static void setup_rw_floppy(void) { - int i, r, flags, dflags; + int i; + int r; + int flags; + int dflags; unsigned long ready_date; timeout_fn function; @@ -1728,9 +1735,9 @@ static void print_result(char *message, int inr) /* interrupt handler. Note that this can be called externally on the Sparc */ irqreturn_t floppy_interrupt(int irq, void *dev_id) { - void (*handler) (void) = do_floppy; int do_print; unsigned long f; + void (*handler)(void) = do_floppy; lasthandler = handler; interruptjiffies = jiffies; @@ -1915,9 +1922,10 @@ static void floppy_shutdown(unsigned long data) /*typedef void (*timeout_fn)(unsigned long);*/ /* start motor, check media-changed condition and write protection */ -static int start_motor(void (*function) (void)) +static int start_motor(void (*function)(void)) { - int mask, data; + int mask; + int data; mask = 0xfc; data = UNIT(current_drive); @@ -2020,17 +2028,17 @@ static struct cont_t wakeup_cont = { .interrupt = empty, .redo = do_wakeup, .error = empty, - .done = (done_f) empty + .done = (done_f)empty }; static struct cont_t intr_cont = { .interrupt = empty, .redo = process_fd_request, .error = empty, - .done = (done_f) empty + .done = (done_f)empty }; -static int wait_til_done(void (*handler) (void), int interruptible) +static int wait_til_done(void (*handler)(void), int interruptible) { int ret; @@ -2049,7 +2057,6 @@ static int wait_til_done(void (*handler) (void), int interruptible) break; is_alive("wait_til_done"); - schedule(); } @@ -2141,6 +2148,7 @@ static void bad_flp_intr(void) static void set_floppy(int drive) { int type = ITYPE(UDRS->fd_device); + if (type) _floppy = floppy_type + type; else @@ -2169,11 +2177,14 @@ static void format_interrupt(void) #define CT(x) ((x) | 0xc0) static void setup_format_params(int track) { + int n; + int il; + int count; + int head_shift; + int track_shift; struct fparm { unsigned char track, head, sect, size; } *here = (struct fparm *)floppy_track_buffer; - int il, n; - int count, head_shift, track_shift; raw_cmd = &default_raw_cmd; raw_cmd->track = track; @@ -2344,7 +2355,10 @@ static void request_done(int uptodate) /* Interrupt handler evaluating the result of the r/w operation */ static void rw_interrupt(void) { - int nr_sectors, ssize, eoc, heads; + int eoc; + int ssize; + int heads; + int nr_sectors; if (R_HEAD >= 2) { /* some Toshiba floppy controllers occasionnally seem to @@ -2476,7 +2490,8 @@ static void copy_buffer(int ssize, int max_sector, int max_sector_2) { int remaining; /* number of transferred 512-byte sectors */ struct bio_vec *bv; - char *buffer, *dma_buffer; + char *buffer; + char *dma_buffer; int size; struct req_iterator iter; @@ -2578,7 +2593,8 @@ static inline int check_dma_crossing(char *start, */ static void virtualdmabug_workaround(void) { - int hard_sectors, end_sector; + int hard_sectors; + int end_sector; if (CT(COMMAND) == FD_WRITE) { COMMAND &= ~0x80; /* switch off multiple track mode */ @@ -2610,7 +2626,10 @@ static void virtualdmabug_workaround(void) static int make_raw_rw_request(void) { int aligned_sector_t; - int max_sector, max_size, tracksize, ssize; + int max_sector; + int max_size; + int tracksize; + int ssize; if (max_buffer_sectors == 0) { printk("VFS: Block I/O scheduled on unopened device\n"); @@ -2777,8 +2796,8 @@ static int make_raw_rw_request(void) indirect, direct, fsector_t); return 0; } -/* check_dma_crossing(raw_cmd->kernel_data, - raw_cmd->length, +/* check_dma_crossing(raw_cmd->kernel_data, + raw_cmd->length, "end of make_raw_request [1]");*/ virtualdmabug_workaround(); @@ -3011,6 +3030,7 @@ static struct cont_t poll_cont = { static int poll_drive(int interruptible, int flag) { int ret; + /* no auto-sense, just clear dcl */ raw_cmd = &default_raw_cmd; raw_cmd->flags = flag; @@ -3173,7 +3193,8 @@ static inline int raw_cmd_copyout(int cmd, char __user *param, static void raw_cmd_free(struct floppy_raw_cmd **ptr) { - struct floppy_raw_cmd *next, *this; + struct floppy_raw_cmd *next; + struct floppy_raw_cmd *this; this = *ptr; *ptr = NULL; @@ -3245,8 +3266,10 @@ static inline int raw_cmd_copyin(int cmd, char __user *param, static int raw_cmd_ioctl(int cmd, void __user *param) { - int drive, ret, ret2; struct floppy_raw_cmd *my_raw_cmd; + int drive; + int ret2; + int ret; if (FDCS->rawcmd <= 1) FDCS->rawcmd = 1; @@ -3453,7 +3476,8 @@ static int fd_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, #define IN(c,x,tag) case c: *(x) = inparam. tag ; return 0 int drive = (long)inode->i_bdev->bd_disk->private_data; - int i, type = ITYPE(UDRS->fd_device); + int type = ITYPE(UDRS->fd_device); + int i; int ret; int size; union inparam { @@ -3619,8 +3643,7 @@ static void __init config_types(void) if (!UDP->cmos && FLOPPY1_TYPE) UDP->cmos = FLOPPY1_TYPE; - /* XXX */ - /* additional physical CMOS drive detection should go here */ + /* FIXME: additional physical CMOS drive detection should go here */ for (drive = 0; drive < N_DRIVE; drive++) { unsigned int type = UDP->cmos; @@ -3903,13 +3926,13 @@ static int floppy_revalidate(struct gendisk *disk) } static struct block_device_operations floppy_fops = { - .owner = THIS_MODULE, - .open = floppy_open, - .release = floppy_release, - .ioctl = fd_ioctl, - .getgeo = fd_getgeo, - .media_changed = check_floppy_change, - .revalidate_disk = floppy_revalidate, + .owner = THIS_MODULE, + .open = floppy_open, + .release = floppy_release, + .ioctl = fd_ioctl, + .getgeo = fd_getgeo, + .media_changed = check_floppy_change, + .revalidate_disk = floppy_revalidate, }; /* @@ -4428,8 +4451,8 @@ static int floppy_grab_irq_and_dma(void) if (FDCS->address != -1) fd_outb(FDCS->dor, FD_DOR); /* - * The driver will try and free resources and relies on us - * to know if they were allocated or not. + * The driver will try and free resources and relies on us + * to know if they were allocated or not. */ fdc = 0; irqdma_allocated = 1; |