[SCSI] Merge sym53c8xx_comm.h and sym53c8xx_defs.h into ncr driver

When the sym1 driver was in the tree, it used to share various parts of
its infrastructure with the ncr driver.  Now it's gone, these files are
just an annoyance, so merge sym53c8xx_comm.h into ncr53c8xx.c and merge
sym53c8xx_defs.h into ncr53c8xx.h.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

4 files changed, 1995 insertions, 2114 deletions

diff --git a/drivers/scsi/ncr53c8xx.c b/drivers/scsi/ncr53c8xx.c
index 8e1c77c..3235070 100644
--- a/drivers/scsi/ncr53c8xx.c
+++ b/drivers/scsi/ncr53c8xx.c
@@ -131,7 +131,739 @@
 #define NAME53C			"ncr53c"
 #define NAME53C8XX		"ncr53c8xx"
 
-#include "sym53c8xx_comm.h"
+
+/*==========================================================
+**
+**	Debugging tags
+**
+**==========================================================
+*/
+
+#define DEBUG_ALLOC    (0x0001)
+#define DEBUG_PHASE    (0x0002)
+#define DEBUG_QUEUE    (0x0008)
+#define DEBUG_RESULT   (0x0010)
+#define DEBUG_POINTER  (0x0020)
+#define DEBUG_SCRIPT   (0x0040)
+#define DEBUG_TINY     (0x0080)
+#define DEBUG_TIMING   (0x0100)
+#define DEBUG_NEGO     (0x0200)
+#define DEBUG_TAGS     (0x0400)
+#define DEBUG_SCATTER  (0x0800)
+#define DEBUG_IC        (0x1000)
+
+/*
+**    Enable/Disable debug messages.
+**    Can be changed at runtime too.
+*/
+
+#ifdef SCSI_NCR_DEBUG_INFO_SUPPORT
+static int ncr_debug = SCSI_NCR_DEBUG_FLAGS;
+	#define DEBUG_FLAGS ncr_debug
+#else
+	#define DEBUG_FLAGS	SCSI_NCR_DEBUG_FLAGS
+#endif
+
+static inline struct list_head *ncr_list_pop(struct list_head *head)
+{
+	if (!list_empty(head)) {
+		struct list_head *elem = head->next;
+
+		list_del(elem);
+		return elem;
+	}
+
+	return NULL;
+}
+
+/*==========================================================
+**
+**	Simple power of two buddy-like allocator.
+**
+**	This simple code is not intended to be fast, but to 
+**	provide power of 2 aligned memory allocations.
+**	Since the SCRIPTS processor only supplies 8 bit 
+**	arithmetic, this allocator allows simple and fast 
+**	address calculations  from the SCRIPTS code.
+**	In addition, cache line alignment is guaranteed for 
+**	power of 2 cache line size.
+**	Enhanced in linux-2.3.44 to provide a memory pool 
+**	per pcidev to support dynamic dma mapping. (I would 
+**	have preferred a real bus astraction, btw).
+**
+**==========================================================
+*/
+
+#define MEMO_SHIFT	4	/* 16 bytes minimum memory chunk */
+#if PAGE_SIZE >= 8192
+#define MEMO_PAGE_ORDER	0	/* 1 PAGE  maximum */
+#else
+#define MEMO_PAGE_ORDER	1	/* 2 PAGES maximum */
+#endif
+#define MEMO_FREE_UNUSED	/* Free unused pages immediately */
+#define MEMO_WARN	1
+#define MEMO_GFP_FLAGS	GFP_ATOMIC
+#define MEMO_CLUSTER_SHIFT	(PAGE_SHIFT+MEMO_PAGE_ORDER)
+#define MEMO_CLUSTER_SIZE	(1UL << MEMO_CLUSTER_SHIFT)
+#define MEMO_CLUSTER_MASK	(MEMO_CLUSTER_SIZE-1)
+
+typedef u_long m_addr_t;	/* Enough bits to bit-hack addresses */
+typedef struct device *m_bush_t;	/* Something that addresses DMAable */
+
+typedef struct m_link {		/* Link between free memory chunks */
+	struct m_link *next;
+} m_link_s;
+
+typedef struct m_vtob {		/* Virtual to Bus address translation */
+	struct m_vtob *next;
+	m_addr_t vaddr;
+	m_addr_t baddr;
+} m_vtob_s;
+#define VTOB_HASH_SHIFT		5
+#define VTOB_HASH_SIZE		(1UL << VTOB_HASH_SHIFT)
+#define VTOB_HASH_MASK		(VTOB_HASH_SIZE-1)
+#define VTOB_HASH_CODE(m)	\
+	((((m_addr_t) (m)) >> MEMO_CLUSTER_SHIFT) & VTOB_HASH_MASK)
+
+typedef struct m_pool {		/* Memory pool of a given kind */
+	m_bush_t bush;
+	m_addr_t (*getp)(struct m_pool *);
+	void (*freep)(struct m_pool *, m_addr_t);
+	int nump;
+	m_vtob_s *(vtob[VTOB_HASH_SIZE]);
+	struct m_pool *next;
+	struct m_link h[PAGE_SHIFT-MEMO_SHIFT+MEMO_PAGE_ORDER+1];
+} m_pool_s;
+
+static void *___m_alloc(m_pool_s *mp, int size)
+{
+	int i = 0;
+	int s = (1 << MEMO_SHIFT);
+	int j;
+	m_addr_t a;
+	m_link_s *h = mp->h;
+
+	if (size > (PAGE_SIZE << MEMO_PAGE_ORDER))
+		return NULL;
+
+	while (size > s) {
+		s <<= 1;
+		++i;
+	}
+
+	j = i;
+	while (!h[j].next) {
+		if (s == (PAGE_SIZE << MEMO_PAGE_ORDER)) {
+			h[j].next = (m_link_s *)mp->getp(mp);
+			if (h[j].next)
+				h[j].next->next = NULL;
+			break;
+		}
+		++j;
+		s <<= 1;
+	}
+	a = (m_addr_t) h[j].next;
+	if (a) {
+		h[j].next = h[j].next->next;
+		while (j > i) {
+			j -= 1;
+			s >>= 1;
+			h[j].next = (m_link_s *) (a+s);
+			h[j].next->next = NULL;
+		}
+	}
+#ifdef DEBUG
+	printk("___m_alloc(%d) = %p\n", size, (void *) a);
+#endif
+	return (void *) a;
+}
+
+static void ___m_free(m_pool_s *mp, void *ptr, int size)
+{
+	int i = 0;
+	int s = (1 << MEMO_SHIFT);
+	m_link_s *q;
+	m_addr_t a, b;
+	m_link_s *h = mp->h;
+
+#ifdef DEBUG
+	printk("___m_free(%p, %d)\n", ptr, size);
+#endif
+
+	if (size > (PAGE_SIZE << MEMO_PAGE_ORDER))
+		return;
+
+	while (size > s) {
+		s <<= 1;
+		++i;
+	}
+
+	a = (m_addr_t) ptr;
+
+	while (1) {
+#ifdef MEMO_FREE_UNUSED
+		if (s == (PAGE_SIZE << MEMO_PAGE_ORDER)) {
+			mp->freep(mp, a);
+			break;
+		}
+#endif
+		b = a ^ s;
+		q = &h[i];
+		while (q->next && q->next != (m_link_s *) b) {
+			q = q->next;
+		}
+		if (!q->next) {
+			((m_link_s *) a)->next = h[i].next;
+			h[i].next = (m_link_s *) a;
+			break;
+		}
+		q->next = q->next->next;
+		a = a & b;
+		s <<= 1;
+		++i;
+	}
+}
+
+static DEFINE_SPINLOCK(ncr53c8xx_lock);
+
+static void *__m_calloc2(m_pool_s *mp, int size, char *name, int uflags)
+{
+	void *p;
+
+	p = ___m_alloc(mp, size);
+
+	if (DEBUG_FLAGS & DEBUG_ALLOC)
+		printk ("new %-10s[%4d] @%p.\n", name, size, p);
+
+	if (p)
+		memset(p, 0, size);
+	else if (uflags & MEMO_WARN)
+		printk (NAME53C8XX ": failed to allocate %s[%d]\n", name, size);
+
+	return p;
+}
+
+#define __m_calloc(mp, s, n)	__m_calloc2(mp, s, n, MEMO_WARN)
+
+static void __m_free(m_pool_s *mp, void *ptr, int size, char *name)
+{
+	if (DEBUG_FLAGS & DEBUG_ALLOC)
+		printk ("freeing %-10s[%4d] @%p.\n", name, size, ptr);
+
+	___m_free(mp, ptr, size);
+
+}
+
+/*
+ * With pci bus iommu support, we use a default pool of unmapped memory 
+ * for memory we donnot need to DMA from/to and one pool per pcidev for 
+ * memory accessed by the PCI chip. `mp0' is the default not DMAable pool.
+ */
+
+static m_addr_t ___mp0_getp(m_pool_s *mp)
+{
+	m_addr_t m = __get_free_pages(MEMO_GFP_FLAGS, MEMO_PAGE_ORDER);
+	if (m)
+		++mp->nump;
+	return m;
+}
+
+static void ___mp0_freep(m_pool_s *mp, m_addr_t m)
+{
+	free_pages(m, MEMO_PAGE_ORDER);
+	--mp->nump;
+}
+
+static m_pool_s mp0 = {NULL, ___mp0_getp, ___mp0_freep};
+
+/*
+ * DMAable pools.
+ */
+
+/*
+ * With pci bus iommu support, we maintain one pool per pcidev and a 
+ * hashed reverse table for virtual to bus physical address translations.
+ */
+static m_addr_t ___dma_getp(m_pool_s *mp)
+{
+	m_addr_t vp;
+	m_vtob_s *vbp;
+
+	vbp = __m_calloc(&mp0, sizeof(*vbp), "VTOB");
+	if (vbp) {
+		dma_addr_t daddr;
+		vp = (m_addr_t) dma_alloc_coherent(mp->bush,
+						PAGE_SIZE<<MEMO_PAGE_ORDER,
+						&daddr, GFP_ATOMIC);
+		if (vp) {
+			int hc = VTOB_HASH_CODE(vp);
+			vbp->vaddr = vp;
+			vbp->baddr = daddr;
+			vbp->next = mp->vtob[hc];
+			mp->vtob[hc] = vbp;
+			++mp->nump;
+			return vp;
+		}
+	}
+	if (vbp)
+		__m_free(&mp0, vbp, sizeof(*vbp), "VTOB");
+	return 0;
+}
+
+static void ___dma_freep(m_pool_s *mp, m_addr_t m)
+{
+	m_vtob_s **vbpp, *vbp;
+	int hc = VTOB_HASH_CODE(m);
+
+	vbpp = &mp->vtob[hc];
+	while (*vbpp && (*vbpp)->vaddr != m)
+		vbpp = &(*vbpp)->next;
+	if (*vbpp) {
+		vbp = *vbpp;
+		*vbpp = (*vbpp)->next;
+		dma_free_coherent(mp->bush, PAGE_SIZE<<MEMO_PAGE_ORDER,
+				  (void *)vbp->vaddr, (dma_addr_t)vbp->baddr);
+		__m_free(&mp0, vbp, sizeof(*vbp), "VTOB");
+		--mp->nump;
+	}
+}
+
+static inline m_pool_s *___get_dma_pool(m_bush_t bush)
+{
+	m_pool_s *mp;
+	for (mp = mp0.next; mp && mp->bush != bush; mp = mp->next);
+	return mp;
+}
+
+static m_pool_s *___cre_dma_pool(m_bush_t bush)
+{
+	m_pool_s *mp;
+	mp = __m_calloc(&mp0, sizeof(*mp), "MPOOL");
+	if (mp) {
+		memset(mp, 0, sizeof(*mp));
+		mp->bush = bush;
+		mp->getp = ___dma_getp;
+		mp->freep = ___dma_freep;
+		mp->next = mp0.next;
+		mp0.next = mp;
+	}
+	return mp;
+}
+
+static void ___del_dma_pool(m_pool_s *p)
+{
+	struct m_pool **pp = &mp0.next;
+
+	while (*pp && *pp != p)
+		pp = &(*pp)->next;
+	if (*pp) {
+		*pp = (*pp)->next;
+		__m_free(&mp0, p, sizeof(*p), "MPOOL");
+	}
+}
+
+static void *__m_calloc_dma(m_bush_t bush, int size, char *name)
+{
+	u_long flags;
+	struct m_pool *mp;
+	void *m = NULL;
+
+	spin_lock_irqsave(&ncr53c8xx_lock, flags);
+	mp = ___get_dma_pool(bush);
+	if (!mp)
+		mp = ___cre_dma_pool(bush);
+	if (mp)
+		m = __m_calloc(mp, size, name);
+	if (mp && !mp->nump)
+		___del_dma_pool(mp);
+	spin_unlock_irqrestore(&ncr53c8xx_lock, flags);
+
+	return m;
+}
+
+static void __m_free_dma(m_bush_t bush, void *m, int size, char *name)
+{
+	u_long flags;
+	struct m_pool *mp;
+
+	spin_lock_irqsave(&ncr53c8xx_lock, flags);
+	mp = ___get_dma_pool(bush);
+	if (mp)
+		__m_free(mp, m, size, name);
+	if (mp && !mp->nump)
+		___del_dma_pool(mp);
+	spin_unlock_irqrestore(&ncr53c8xx_lock, flags);
+}
+
+static m_addr_t __vtobus(m_bush_t bush, void *m)
+{
+	u_long flags;
+	m_pool_s *mp;
+	int hc = VTOB_HASH_CODE(m);
+	m_vtob_s *vp = NULL;
+	m_addr_t a = ((m_addr_t) m) & ~MEMO_CLUSTER_MASK;
+
+	spin_lock_irqsave(&ncr53c8xx_lock, flags);
+	mp = ___get_dma_pool(bush);
+	if (mp) {
+		vp = mp->vtob[hc];
+		while (vp && (m_addr_t) vp->vaddr != a)
+			vp = vp->next;
+	}
+	spin_unlock_irqrestore(&ncr53c8xx_lock, flags);
+	return vp ? vp->baddr + (((m_addr_t) m) - a) : 0;
+}
+
+#define _m_calloc_dma(np, s, n)		__m_calloc_dma(np->dev, s, n)
+#define _m_free_dma(np, p, s, n)	__m_free_dma(np->dev, p, s, n)
+#define m_calloc_dma(s, n)		_m_calloc_dma(np, s, n)
+#define m_free_dma(p, s, n)		_m_free_dma(np, p, s, n)
+#define _vtobus(np, p)			__vtobus(np->dev, p)
+#define vtobus(p)			_vtobus(np, p)
+
+/*
+ *  Deal with DMA mapping/unmapping.
+ */
+
+/* To keep track of the dma mapping (sg/single) that has been set */
+#define __data_mapped	SCp.phase
+#define __data_mapping	SCp.have_data_in
+
+static void __unmap_scsi_data(struct device *dev, struct scsi_cmnd *cmd)
+{
+	switch(cmd->__data_mapped) {
+	case 2:
+		dma_unmap_sg(dev, cmd->buffer, cmd->use_sg,
+				cmd->sc_data_direction);
+		break;
+	case 1:
+		dma_unmap_single(dev, cmd->__data_mapping,
+				 cmd->request_bufflen,
+				 cmd->sc_data_direction);
+		break;
+	}
+	cmd->__data_mapped = 0;
+}
+
+static u_long __map_scsi_single_data(struct device *dev, struct scsi_cmnd *cmd)
+{
+	dma_addr_t mapping;
+
+	if (cmd->request_bufflen == 0)
+		return 0;
+
+	mapping = dma_map_single(dev, cmd->request_buffer,
+				 cmd->request_bufflen,
+				 cmd->sc_data_direction);
+	cmd->__data_mapped = 1;
+	cmd->__data_mapping = mapping;
+
+	return mapping;
+}
+
+static int __map_scsi_sg_data(struct device *dev, struct scsi_cmnd *cmd)
+{
+	int use_sg;
+
+	if (cmd->use_sg == 0)
+		return 0;
+
+	use_sg = dma_map_sg(dev, cmd->buffer, cmd->use_sg,
+			cmd->sc_data_direction);
+	cmd->__data_mapped = 2;
+	cmd->__data_mapping = use_sg;
+
+	return use_sg;
+}
+
+#define unmap_scsi_data(np, cmd)	__unmap_scsi_data(np->dev, cmd)
+#define map_scsi_single_data(np, cmd)	__map_scsi_single_data(np->dev, cmd)
+#define map_scsi_sg_data(np, cmd)	__map_scsi_sg_data(np->dev, cmd)
+
+/*==========================================================
+**
+**	Driver setup.
+**
+**	This structure is initialized from linux config 
+**	options. It can be overridden at boot-up by the boot 
+**	command line.
+**
+**==========================================================
+*/
+static struct ncr_driver_setup
+	driver_setup			= SCSI_NCR_DRIVER_SETUP;
+
+#ifdef	SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT
+static struct ncr_driver_setup
+	driver_safe_setup __initdata	= SCSI_NCR_DRIVER_SAFE_SETUP;
+#endif
+
+#define initverbose (driver_setup.verbose)
+#define bootverbose (np->verbose)
+
+
+/*===================================================================
+**
+**	Driver setup from the boot command line
+**
+**===================================================================
+*/
+
+#ifdef MODULE
+#define	ARG_SEP	' '
+#else
+#define	ARG_SEP	','
+#endif
+
+#define OPT_TAGS		1
+#define OPT_MASTER_PARITY	2
+#define OPT_SCSI_PARITY		3
+#define OPT_DISCONNECTION	4
+#define OPT_SPECIAL_FEATURES	5
+#define OPT_UNUSED_1		6
+#define OPT_FORCE_SYNC_NEGO	7
+#define OPT_REVERSE_PROBE	8
+#define OPT_DEFAULT_SYNC	9
+#define OPT_VERBOSE		10
+#define OPT_DEBUG		11
+#define OPT_BURST_MAX		12
+#define OPT_LED_PIN		13
+#define OPT_MAX_WIDE		14
+#define OPT_SETTLE_DELAY	15
+#define OPT_DIFF_SUPPORT	16
+#define OPT_IRQM		17
+#define OPT_PCI_FIX_UP		18
+#define OPT_BUS_CHECK		19
+#define OPT_OPTIMIZE		20
+#define OPT_RECOVERY		21
+#define OPT_SAFE_SETUP		22
+#define OPT_USE_NVRAM		23
+#define OPT_EXCLUDE		24
+#define OPT_HOST_ID		25
+
+#ifdef SCSI_NCR_IARB_SUPPORT
+#define OPT_IARB		26
+#endif
+
+static char setup_token[] __initdata = 
+	"tags:"   "mpar:"
+	"spar:"   "disc:"
+	"specf:"  "ultra:"
+	"fsn:"    "revprob:"
+	"sync:"   "verb:"
+	"debug:"  "burst:"
+	"led:"    "wide:"
+	"settle:" "diff:"
+	"irqm:"   "pcifix:"
+	"buschk:" "optim:"
+	"recovery:"
+	"safe:"   "nvram:"
+	"excl:"   "hostid:"
+#ifdef SCSI_NCR_IARB_SUPPORT
+	"iarb:"
+#endif
+	;	/* DONNOT REMOVE THIS ';' */
+
+#ifdef MODULE
+#define	ARG_SEP	' '
+#else
+#define	ARG_SEP	','
+#endif
+
+static int __init get_setup_token(char *p)
+{
+	char *cur = setup_token;
+	char *pc;
+	int i = 0;
+
+	while (cur != NULL && (pc = strchr(cur, ':')) != NULL) {
+		++pc;
+		++i;
+		if (!strncmp(p, cur, pc - cur))
+			return i;
+		cur = pc;
+	}
+	return 0;
+}
+
+
+static int __init sym53c8xx__setup(char *str)
+{
+#ifdef SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT
+	char *cur = str;
+	char *pc, *pv;
+	int i, val, c;
+	int xi = 0;
+
+	while (cur != NULL && (pc = strchr(cur, ':')) != NULL) {
+		char *pe;
+
+		val = 0;
+		pv = pc;
+		c = *++pv;
+
+		if	(c == 'n')
+			val = 0;
+		else if	(c == 'y')
+			val = 1;
+		else
+			val = (int) simple_strtoul(pv, &pe, 0);
+
+		switch (get_setup_token(cur)) {
+		case OPT_TAGS:
+			driver_setup.default_tags = val;
+			if (pe && *pe == '/') {
+				i = 0;
+				while (*pe && *pe != ARG_SEP && 
+					i < sizeof(driver_setup.tag_ctrl)-1) {
+					driver_setup.tag_ctrl[i++] = *pe++;
+				}
+				driver_setup.tag_ctrl[i] = '\0';
+			}
+			break;
+		case OPT_MASTER_PARITY:
+			driver_setup.master_parity = val;
+			break;
+		case OPT_SCSI_PARITY:
+			driver_setup.scsi_parity = val;
+			break;
+		case OPT_DISCONNECTION:
+			driver_setup.disconnection = val;
+			break;
+		case OPT_SPECIAL_FEATURES:
+			driver_setup.special_features = val;
+			break;
+		case OPT_FORCE_SYNC_NEGO:
+			driver_setup.force_sync_nego = val;
+			break;
+		case OPT_REVERSE_PROBE:
+			driver_setup.reverse_probe = val;
+			break;
+		case OPT_DEFAULT_SYNC:
+			driver_setup.default_sync = val;
+			break;
+		case OPT_VERBOSE:
+			driver_setup.verbose = val;
+			break;
+		case OPT_DEBUG:
+			driver_setup.debug = val;
+			break;
+		case OPT_BURST_MAX:
+			driver_setup.burst_max = val;
+			break;
+		case OPT_LED_PIN:
+			driver_setup.led_pin = val;
+			break;
+		case OPT_MAX_WIDE:
+			driver_setup.max_wide = val? 1:0;
+			break;
+		case OPT_SETTLE_DELAY:
+			driver_setup.settle_delay = val;
+			break;
+		case OPT_DIFF_SUPPORT:
+			driver_setup.diff_support = val;
+			break;
+		case OPT_IRQM:
+			driver_setup.irqm = val;
+			break;
+		case OPT_PCI_FIX_UP:
+			driver_setup.pci_fix_up	= val;
+			break;
+		case OPT_BUS_CHECK:
+			driver_setup.bus_check = val;
+			break;
+		case OPT_OPTIMIZE:
+			driver_setup.optimize = val;
+			break;
+		case OPT_RECOVERY:
+			driver_setup.recovery = val;
+			break;
+		case OPT_USE_NVRAM:
+			driver_setup.use_nvram = val;
+			break;
+		case OPT_SAFE_SETUP:
+			memcpy(&driver_setup, &driver_safe_setup,
+				sizeof(driver_setup));
+			break;
+		case OPT_EXCLUDE:
+			if (xi < SCSI_NCR_MAX_EXCLUDES)
+				driver_setup.excludes[xi++] = val;
+			break;
+		case OPT_HOST_ID:
+			driver_setup.host_id = val;
+			break;
+#ifdef SCSI_NCR_IARB_SUPPORT
+		case OPT_IARB:
+			driver_setup.iarb = val;
+			break;
+#endif
+		default:
+			printk("sym53c8xx_setup: unexpected boot option '%.*s' ignored\n", (int)(pc-cur+1), cur);
+			break;
+		}
+
+		if ((cur = strchr(cur, ARG_SEP)) != NULL)
+			++cur;
+	}
+#endif /* SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT */
+	return 1;
+}
+
+/*===================================================================
+**
+**	Get device queue depth from boot command line.
+**
+**===================================================================
+*/
+#define DEF_DEPTH	(driver_setup.default_tags)
+#define ALL_TARGETS	-2
+#define NO_TARGET	-1
+#define ALL_LUNS	-2
+#define NO_LUN		-1
+
+static int device_queue_depth(int unit, int target, int lun)
+{
+	int c, h, t, u, v;
+	char *p = driver_setup.tag_ctrl;
+	char *ep;
+
+	h = -1;
+	t = NO_TARGET;
+	u = NO_LUN;
+	while ((c = *p++) != 0) {
+		v = simple_strtoul(p, &ep, 0);
+		switch(c) {
+		case '/':
+			++h;
+			t = ALL_TARGETS;
+			u = ALL_LUNS;
+			break;
+		case 't':
+			if (t != target)
+				t = (target == v) ? v : NO_TARGET;
+			u = ALL_LUNS;
+			break;
+		case 'u':
+			if (u != lun)
+				u = (lun == v) ? v : NO_LUN;
+			break;
+		case 'q':
+			if (h == unit &&
+				(t == ALL_TARGETS || t == target) &&
+				(u == ALL_LUNS    || u == lun))
+				return v;
+			break;
+		case '-':
+			t = ALL_TARGETS;
+			u = ALL_LUNS;
+			break;
+		default:
+			break;
+		}
+		p = ep;
+	}
+	return DEF_DEPTH;
+}
 
 
 /*==========================================================
diff --git a/drivers/scsi/ncr53c8xx.h b/drivers/scsi/ncr53c8xx.h
index 05c7b83..6a7bef2 100644
--- a/drivers/scsi/ncr53c8xx.h
+++ b/drivers/scsi/ncr53c8xx.h
@@ -2,6 +2,7 @@
 **  Device driver for the PCI-SCSI NCR538XX controller family.
 **
 **  Copyright (C) 1994  Wolfgang Stanglmeier
+**  Copyright (C) 1998-2001  Gerard Roudier <groudier@free.fr>
 **
 **  This program is free software; you can redistribute it and/or modify
 **  it under the terms of the GNU General Public License as published by
@@ -36,15 +37,1275 @@
 **  And has been ported to NetBSD by
 **          Charles M. Hannum           <mycroft@gnu.ai.mit.edu>
 **
+**  NVRAM detection and reading.
+**    Copyright (C) 1997 Richard Waltham <dormouse@farsrobt.demon.co.uk>
+**
+**  Added support for MIPS big endian systems.
+**    Carsten Langgaard, carstenl@mips.com
+**    Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
+**
+**  Added support for HP PARISC big endian systems.
+**    Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
+**
 *******************************************************************************
 */
 
 #ifndef NCR53C8XX_H
 #define NCR53C8XX_H
 
+#include <linux/config.h>
 #include <scsi/scsi_host.h>
 
-#include "sym53c8xx_defs.h"
+/*
+**	If you want a driver as small as possible, do not define the 
+**	following options.
+*/
+#define SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT
+#define SCSI_NCR_DEBUG_INFO_SUPPORT
+
+/*
+**	To disable integrity checking, do not define the 
+**	following option.
+*/
+#ifdef	CONFIG_SCSI_NCR53C8XX_INTEGRITY_CHECK
+#	define SCSI_NCR_ENABLE_INTEGRITY_CHECK
+#endif
+
+/* ---------------------------------------------------------------------
+** Take into account kernel configured parameters.
+** Most of these options can be overridden at startup by a command line.
+** ---------------------------------------------------------------------
+*/
+
+/*
+ * For Ultra2 and Ultra3 SCSI support option, use special features. 
+ *
+ * Value (default) means:
+ *	bit 0 : all features enabled, except:
+ *		bit 1 : PCI Write And Invalidate.
+ *		bit 2 : Data Phase Mismatch handling from SCRIPTS.
+ *
+ * Use boot options ncr53c8xx=specf:1 if you want all chip features to be 
+ * enabled by the driver.
+ */
+#define	SCSI_NCR_SETUP_SPECIAL_FEATURES		(3)
+
+#define SCSI_NCR_MAX_SYNC			(80)
+
+/*
+ * Allow tags from 2 to 256, default 8
+ */
+#ifdef	CONFIG_SCSI_NCR53C8XX_MAX_TAGS
+#if	CONFIG_SCSI_NCR53C8XX_MAX_TAGS < 2
+#define SCSI_NCR_MAX_TAGS	(2)
+#elif	CONFIG_SCSI_NCR53C8XX_MAX_TAGS > 256
+#define SCSI_NCR_MAX_TAGS	(256)
+#else
+#define	SCSI_NCR_MAX_TAGS	CONFIG_SCSI_NCR53C8XX_MAX_TAGS
+#endif
+#else
+#define SCSI_NCR_MAX_TAGS	(8)
+#endif
+
+/*
+ * Allow tagged command queuing support if configured with default number 
+ * of tags set to max (see above).
+ */
+#ifdef	CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS
+#define	SCSI_NCR_SETUP_DEFAULT_TAGS	CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS
+#elif	defined CONFIG_SCSI_NCR53C8XX_TAGGED_QUEUE
+#define	SCSI_NCR_SETUP_DEFAULT_TAGS	SCSI_NCR_MAX_TAGS
+#else
+#define	SCSI_NCR_SETUP_DEFAULT_TAGS	(0)
+#endif
+
+/*
+ * Immediate arbitration
+ */
+#if defined(CONFIG_SCSI_NCR53C8XX_IARB)
+#define SCSI_NCR_IARB_SUPPORT
+#endif
+
+/*
+ * Sync transfer frequency at startup.
+ * Allow from 5Mhz to 80Mhz default 20 Mhz.
+ */
+#ifndef	CONFIG_SCSI_NCR53C8XX_SYNC
+#define	CONFIG_SCSI_NCR53C8XX_SYNC	(20)
+#elif	CONFIG_SCSI_NCR53C8XX_SYNC > SCSI_NCR_MAX_SYNC
+#undef	CONFIG_SCSI_NCR53C8XX_SYNC
+#define	CONFIG_SCSI_NCR53C8XX_SYNC	SCSI_NCR_MAX_SYNC
+#endif
+
+#if	CONFIG_SCSI_NCR53C8XX_SYNC == 0
+#define	SCSI_NCR_SETUP_DEFAULT_SYNC	(255)
+#elif	CONFIG_SCSI_NCR53C8XX_SYNC <= 5
+#define	SCSI_NCR_SETUP_DEFAULT_SYNC	(50)
+#elif	CONFIG_SCSI_NCR53C8XX_SYNC <= 20
+#define	SCSI_NCR_SETUP_DEFAULT_SYNC	(250/(CONFIG_SCSI_NCR53C8XX_SYNC))
+#elif	CONFIG_SCSI_NCR53C8XX_SYNC <= 33
+#define	SCSI_NCR_SETUP_DEFAULT_SYNC	(11)
+#elif	CONFIG_SCSI_NCR53C8XX_SYNC <= 40
+#define	SCSI_NCR_SETUP_DEFAULT_SYNC	(10)
+#else
+#define	SCSI_NCR_SETUP_DEFAULT_SYNC 	(9)
+#endif
+
+/*
+ * Disallow disconnections at boot-up
+ */
+#ifdef CONFIG_SCSI_NCR53C8XX_NO_DISCONNECT
+#define SCSI_NCR_SETUP_DISCONNECTION	(0)
+#else
+#define SCSI_NCR_SETUP_DISCONNECTION	(1)
+#endif
+
+/*
+ * Force synchronous negotiation for all targets
+ */
+#ifdef CONFIG_SCSI_NCR53C8XX_FORCE_SYNC_NEGO
+#define SCSI_NCR_SETUP_FORCE_SYNC_NEGO	(1)
+#else
+#define SCSI_NCR_SETUP_FORCE_SYNC_NEGO	(0)
+#endif
+
+/*
+ * Disable master parity checking (flawed hardwares need that)
+ */
+#ifdef CONFIG_SCSI_NCR53C8XX_DISABLE_MPARITY_CHECK
+#define SCSI_NCR_SETUP_MASTER_PARITY	(0)
+#else
+#define SCSI_NCR_SETUP_MASTER_PARITY	(1)
+#endif
+
+/*
+ * Disable scsi parity checking (flawed devices may need that)
+ */
+#ifdef CONFIG_SCSI_NCR53C8XX_DISABLE_PARITY_CHECK
+#define SCSI_NCR_SETUP_SCSI_PARITY	(0)
+#else
+#define SCSI_NCR_SETUP_SCSI_PARITY	(1)
+#endif
+
+/*
+ * Settle time after reset at boot-up
+ */
+#define SCSI_NCR_SETUP_SETTLE_TIME	(2)
+
+/*
+**	Bridge quirks work-around option defaulted to 1.
+*/
+#ifndef	SCSI_NCR_PCIQ_WORK_AROUND_OPT
+#define	SCSI_NCR_PCIQ_WORK_AROUND_OPT	1
+#endif
+
+/*
+**	Work-around common bridge misbehaviour.
+**
+**	- Do not flush posted writes in the opposite 
+**	  direction on read.
+**	- May reorder DMA writes to memory.
+**
+**	This option should not affect performances 
+**	significantly, so it is the default.
+*/
+#if	SCSI_NCR_PCIQ_WORK_AROUND_OPT == 1
+#define	SCSI_NCR_PCIQ_MAY_NOT_FLUSH_PW_UPSTREAM
+#define	SCSI_NCR_PCIQ_MAY_REORDER_WRITES
+#define	SCSI_NCR_PCIQ_MAY_MISS_COMPLETIONS
+
+/*
+**	Same as option 1, but also deal with 
+**	misconfigured interrupts.
+**
+**	- Edge triggerred instead of level sensitive.
+**	- No interrupt line connected.
+**	- IRQ number misconfigured.
+**	
+**	If no interrupt is delivered, the driver will 
+**	catch the interrupt conditions 10 times per 
+**	second. No need to say that this option is 
+**	not recommended.
+*/
+#elif	SCSI_NCR_PCIQ_WORK_AROUND_OPT == 2
+#define	SCSI_NCR_PCIQ_MAY_NOT_FLUSH_PW_UPSTREAM
+#define	SCSI_NCR_PCIQ_MAY_REORDER_WRITES
+#define	SCSI_NCR_PCIQ_MAY_MISS_COMPLETIONS
+#define	SCSI_NCR_PCIQ_BROKEN_INTR
+
+/*
+**	Some bridge designers decided to flush 
+**	everything prior to deliver the interrupt.
+**	This option tries to deal with such a 
+**	behaviour.
+*/
+#elif	SCSI_NCR_PCIQ_WORK_AROUND_OPT == 3
+#define	SCSI_NCR_PCIQ_SYNC_ON_INTR
+#endif
+
+/*
+**	Other parameters not configurable with "make config"
+**	Avoid to change these constants, unless you know what you are doing.
+*/
+
+#define SCSI_NCR_ALWAYS_SIMPLE_TAG
+#define SCSI_NCR_MAX_SCATTER	(127)
+#define SCSI_NCR_MAX_TARGET	(16)
+
+/*
+**   Compute some desirable value for CAN_QUEUE 
+**   and CMD_PER_LUN.
+**   The driver will use lower values if these 
+**   ones appear to be too large.
+*/
+#define SCSI_NCR_CAN_QUEUE	(8*SCSI_NCR_MAX_TAGS + 2*SCSI_NCR_MAX_TARGET)
+#define SCSI_NCR_CMD_PER_LUN	(SCSI_NCR_MAX_TAGS)
+
+#define SCSI_NCR_SG_TABLESIZE	(SCSI_NCR_MAX_SCATTER)
+#define SCSI_NCR_TIMER_INTERVAL	(HZ)
+
+#if 1 /* defined CONFIG_SCSI_MULTI_LUN */
+#define SCSI_NCR_MAX_LUN	(16)
+#else
+#define SCSI_NCR_MAX_LUN	(1)
+#endif
+
+/*
+ *  IO functions definition for big/little endian CPU support.
+ *  For now, the NCR is only supported in little endian addressing mode, 
+ */
+
+#ifdef	__BIG_ENDIAN
+
+#define	inw_l2b		inw
+#define	inl_l2b		inl
+#define	outw_b2l	outw
+#define	outl_b2l	outl
+
+#define	readb_raw	readb
+#define	writeb_raw	writeb
+
+#if defined(SCSI_NCR_BIG_ENDIAN)
+#define	readw_l2b	__raw_readw
+#define	readl_l2b	__raw_readl
+#define	writew_b2l	__raw_writew
+#define	writel_b2l	__raw_writel
+#define	readw_raw	__raw_readw
+#define	readl_raw	__raw_readl
+#define	writew_raw	__raw_writew
+#define	writel_raw	__raw_writel
+#else	/* Other big-endian */
+#define	readw_l2b	readw
+#define	readl_l2b	readl
+#define	writew_b2l	writew
+#define	writel_b2l	writel
+#define	readw_raw	readw
+#define	readl_raw	readl
+#define	writew_raw	writew
+#define	writel_raw	writel
+#endif
+
+#else	/* little endian */
+
+#define	inw_raw		inw
+#define	inl_raw		inl
+#define	outw_raw	outw
+#define	outl_raw	outl
+
+#define	readb_raw	readb
+#define	readw_raw	readw
+#define	readl_raw	readl
+#define	writeb_raw	writeb
+#define	writew_raw	writew
+#define	writel_raw	writel
+
+#endif
+
+#if !defined(__hppa__) && !defined(__mips__)
+#ifdef	SCSI_NCR_BIG_ENDIAN
+#error	"The NCR in BIG ENDIAN addressing mode is not (yet) supported"
+#endif
+#endif
+
+#define MEMORY_BARRIER()	mb()
+
+
+/*
+ *  If the NCR uses big endian addressing mode over the 
+ *  PCI, actual io register addresses for byte and word 
+ *  accesses must be changed according to lane routing.
+ *  Btw, ncr_offb() and ncr_offw() macros only apply to 
+ *  constants and so donnot generate bloated code.
+ */
+
+#if	defined(SCSI_NCR_BIG_ENDIAN)
+
+#define ncr_offb(o)	(((o)&~3)+((~((o)&3))&3))
+#define ncr_offw(o)	(((o)&~3)+((~((o)&3))&2))
+
+#else
+
+#define ncr_offb(o)	(o)
+#define ncr_offw(o)	(o)
+
+#endif
+
+/*
+ *  If the CPU and the NCR use same endian-ness addressing,
+ *  no byte reordering is needed for script patching.
+ *  Macro cpu_to_scr() is to be used for script patching.
+ *  Macro scr_to_cpu() is to be used for getting a DWORD 
+ *  from the script.
+ */
+
+#if	defined(__BIG_ENDIAN) && !defined(SCSI_NCR_BIG_ENDIAN)
+
+#define cpu_to_scr(dw)	cpu_to_le32(dw)
+#define scr_to_cpu(dw)	le32_to_cpu(dw)
+
+#elif	defined(__LITTLE_ENDIAN) && defined(SCSI_NCR_BIG_ENDIAN)
+
+#define cpu_to_scr(dw)	cpu_to_be32(dw)
+#define scr_to_cpu(dw)	be32_to_cpu(dw)
+
+#else
+
+#define cpu_to_scr(dw)	(dw)
+#define scr_to_cpu(dw)	(dw)
+
+#endif
+
+/*
+ *  Access to the controller chip.
+ *
+ *  If the CPU and the NCR use same endian-ness addressing,
+ *  no byte reordering is needed for accessing chip io 
+ *  registers. Functions suffixed by '_raw' are assumed 
+ *  to access the chip over the PCI without doing byte 
+ *  reordering. Functions suffixed by '_l2b' are 
+ *  assumed to perform little-endian to big-endian byte 
+ *  reordering, those suffixed by '_b2l' blah, blah,
+ *  blah, ...
+ */
+
+/*
+ *  MEMORY mapped IO input / output
+ */
+
+#define INB_OFF(o)		readb_raw((char __iomem *)np->reg + ncr_offb(o))
+#define OUTB_OFF(o, val)	writeb_raw((val), (char __iomem *)np->reg + ncr_offb(o))
+
+#if	defined(__BIG_ENDIAN) && !defined(SCSI_NCR_BIG_ENDIAN)
+
+#define INW_OFF(o)		readw_l2b((char __iomem *)np->reg + ncr_offw(o))
+#define INL_OFF(o)		readl_l2b((char __iomem *)np->reg + (o))
+
+#define OUTW_OFF(o, val)	writew_b2l((val), (char __iomem *)np->reg + ncr_offw(o))
+#define OUTL_OFF(o, val)	writel_b2l((val), (char __iomem *)np->reg + (o))
+
+#elif	defined(__LITTLE_ENDIAN) && defined(SCSI_NCR_BIG_ENDIAN)
+
+#define INW_OFF(o)		readw_b2l((char __iomem *)np->reg + ncr_offw(o))
+#define INL_OFF(o)		readl_b2l((char __iomem *)np->reg + (o))
+
+#define OUTW_OFF(o, val)	writew_l2b((val), (char __iomem *)np->reg + ncr_offw(o))
+#define OUTL_OFF(o, val)	writel_l2b((val), (char __iomem *)np->reg + (o))
+
+#else
+
+#ifdef CONFIG_SCSI_NCR53C8XX_NO_WORD_TRANSFERS
+/* Only 8 or 32 bit transfers allowed */
+#define INW_OFF(o)		(readb((char __iomem *)np->reg + ncr_offw(o)) << 8 | readb((char __iomem *)np->reg + ncr_offw(o) + 1))
+#else
+#define INW_OFF(o)		readw_raw((char __iomem *)np->reg + ncr_offw(o))
+#endif
+#define INL_OFF(o)		readl_raw((char __iomem *)np->reg + (o))
+
+#ifdef CONFIG_SCSI_NCR53C8XX_NO_WORD_TRANSFERS
+/* Only 8 or 32 bit transfers allowed */
+#define OUTW_OFF(o, val)	do { writeb((char)((val) >> 8), (char __iomem *)np->reg + ncr_offw(o)); writeb((char)(val), (char __iomem *)np->reg + ncr_offw(o) + 1); } while (0)
+#else
+#define OUTW_OFF(o, val)	writew_raw((val), (char __iomem *)np->reg + ncr_offw(o))
+#endif
+#define OUTL_OFF(o, val)	writel_raw((val), (char __iomem *)np->reg + (o))
+
+#endif
+
+#define INB(r)		INB_OFF (offsetof(struct ncr_reg,r))
+#define INW(r)		INW_OFF (offsetof(struct ncr_reg,r))
+#define INL(r)		INL_OFF (offsetof(struct ncr_reg,r))
+
+#define OUTB(r, val)	OUTB_OFF (offsetof(struct ncr_reg,r), (val))
+#define OUTW(r, val)	OUTW_OFF (offsetof(struct ncr_reg,r), (val))
+#define OUTL(r, val)	OUTL_OFF (offsetof(struct ncr_reg,r), (val))
+
+/*
+ *  Set bit field ON, OFF 
+ */
+
+#define OUTONB(r, m)	OUTB(r, INB(r) | (m))
+#define OUTOFFB(r, m)	OUTB(r, INB(r) & ~(m))
+#define OUTONW(r, m)	OUTW(r, INW(r) | (m))
+#define OUTOFFW(r, m)	OUTW(r, INW(r) & ~(m))
+#define OUTONL(r, m)	OUTL(r, INL(r) | (m))
+#define OUTOFFL(r, m)	OUTL(r, INL(r) & ~(m))
+
+/*
+ *  We normally want the chip to have a consistent view
+ *  of driver internal data structures when we restart it.
+ *  Thus these macros.
+ */
+#define OUTL_DSP(v)				\
+	do {					\
+		MEMORY_BARRIER();		\
+		OUTL (nc_dsp, (v));		\
+	} while (0)
+
+#define OUTONB_STD()				\
+	do {					\
+		MEMORY_BARRIER();		\
+		OUTONB (nc_dcntl, (STD|NOCOM));	\
+	} while (0)
+
+
+/*
+**   NCR53C8XX devices features table.
+*/
+struct ncr_chip {
+	unsigned short	revision_id;
+	unsigned char	burst_max;	/* log-base-2 of max burst */
+	unsigned char	offset_max;
+	unsigned char	nr_divisor;
+	unsigned int	features;
+#define FE_LED0		(1<<0)
+#define FE_WIDE		(1<<1)    /* Wide data transfers */
+#define FE_ULTRA	(1<<2)	  /* Ultra speed 20Mtrans/sec */
+#define FE_DBLR		(1<<4)	  /* Clock doubler present */
+#define FE_QUAD		(1<<5)	  /* Clock quadrupler present */
+#define FE_ERL		(1<<6)    /* Enable read line */
+#define FE_CLSE		(1<<7)    /* Cache line size enable */
+#define FE_WRIE		(1<<8)    /* Write & Invalidate enable */
+#define FE_ERMP		(1<<9)    /* Enable read multiple */
+#define FE_BOF		(1<<10)   /* Burst opcode fetch */
+#define FE_DFS		(1<<11)   /* DMA fifo size */
+#define FE_PFEN		(1<<12)   /* Prefetch enable */
+#define FE_LDSTR	(1<<13)   /* Load/Store supported */
+#define FE_RAM		(1<<14)   /* On chip RAM present */
+#define FE_VARCLK	(1<<15)   /* SCSI clock may vary */
+#define FE_RAM8K	(1<<16)   /* On chip RAM sized 8Kb */
+#define FE_64BIT	(1<<17)   /* Have a 64-bit PCI interface */
+#define FE_IO256	(1<<18)   /* Requires full 256 bytes in PCI space */
+#define FE_NOPM		(1<<19)   /* Scripts handles phase mismatch */
+#define FE_LEDC		(1<<20)   /* Hardware control of LED */
+#define FE_DIFF		(1<<21)   /* Support Differential SCSI */
+#define FE_66MHZ 	(1<<23)   /* 66MHz PCI Support */
+#define FE_DAC	 	(1<<24)   /* Support DAC cycles (64 bit addressing) */
+#define FE_ISTAT1 	(1<<25)   /* Have ISTAT1, MBOX0, MBOX1 registers */
+#define FE_DAC_IN_USE	(1<<26)	  /* Platform does DAC cycles */
+#define FE_EHP		(1<<27)   /* 720: Even host parity */
+#define FE_MUX		(1<<28)   /* 720: Multiplexed bus */
+#define FE_EA		(1<<29)   /* 720: Enable Ack */
+
+#define FE_CACHE_SET	(FE_ERL|FE_CLSE|FE_WRIE|FE_ERMP)
+#define FE_SCSI_SET	(FE_WIDE|FE_ULTRA|FE_DBLR|FE_QUAD|F_CLK80)
+#define FE_SPECIAL_SET	(FE_CACHE_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN|FE_RAM)
+};
+
+
+/*
+**	Driver setup structure.
+**
+**	This structure is initialized from linux config options.
+**	It can be overridden at boot-up by the boot command line.
+*/
+#define SCSI_NCR_MAX_EXCLUDES 8
+struct ncr_driver_setup {
+	u8	master_parity;
+	u8	scsi_parity;
+	u8	disconnection;
+	u8	special_features;
+	u8	force_sync_nego;
+	u8	reverse_probe;
+	u8	pci_fix_up;
+	u8	use_nvram;
+	u8	verbose;
+	u8	default_tags;
+	u16	default_sync;
+	u16	debug;
+	u8	burst_max;
+	u8	led_pin;
+	u8	max_wide;
+	u8	settle_delay;
+	u8	diff_support;
+	u8	irqm;
+	u8	bus_check;
+	u8	optimize;
+	u8	recovery;
+	u8	host_id;
+	u16	iarb;
+	u32	excludes[SCSI_NCR_MAX_EXCLUDES];
+	char	tag_ctrl[100];
+};
+
+/*
+**	Initial setup.
+**	Can be overriden at startup by a command line.
+*/
+#define SCSI_NCR_DRIVER_SETUP			\
+{						\
+	SCSI_NCR_SETUP_MASTER_PARITY,		\
+	SCSI_NCR_SETUP_SCSI_PARITY,		\
+	SCSI_NCR_SETUP_DISCONNECTION,		\
+	SCSI_NCR_SETUP_SPECIAL_FEATURES,	\
+	SCSI_NCR_SETUP_FORCE_SYNC_NEGO,		\
+	0,					\
+	0,					\
+	1,					\
+	0,					\
+	SCSI_NCR_SETUP_DEFAULT_TAGS,		\
+	SCSI_NCR_SETUP_DEFAULT_SYNC,		\
+	0x00,					\
+	7,					\
+	0,					\
+	1,					\
+	SCSI_NCR_SETUP_SETTLE_TIME,		\
+	0,					\
+	0,					\
+	1,					\
+	0,					\
+	0,					\
+	255,					\
+	0x00					\
+}
+
+/*
+**	Boot fail safe setup.
+**	Override initial setup from boot command line:
+**	ncr53c8xx=safe:y
+*/
+#define SCSI_NCR_DRIVER_SAFE_SETUP		\
+{						\
+	0,					\
+	1,					\
+	0,					\
+	0,					\
+	0,					\
+	0,					\
+	0,					\
+	1,					\
+	2,					\
+	0,					\
+	255,					\
+	0x00,					\
+	255,					\
+	0,					\
+	0,					\
+	10,					\
+	1,					\
+	1,					\
+	1,					\
+	0,					\
+	0,					\
+	255					\
+}
+
+/**************** ORIGINAL CONTENT of ncrreg.h from FreeBSD ******************/
+
+/*-----------------------------------------------------------------
+**
+**	The ncr 53c810 register structure.
+**
+**-----------------------------------------------------------------
+*/
+
+struct ncr_reg {
+/*00*/  u8	nc_scntl0;    /* full arb., ena parity, par->ATN  */
+
+/*01*/  u8	nc_scntl1;    /* no reset                         */
+        #define   ISCON   0x10  /* connected to scsi		    */
+        #define   CRST    0x08  /* force reset                      */
+        #define   IARB    0x02  /* immediate arbitration            */
+
+/*02*/  u8	nc_scntl2;    /* no disconnect expected           */
+	#define   SDU     0x80  /* cmd: disconnect will raise error */
+	#define   CHM     0x40  /* sta: chained mode                */
+	#define   WSS     0x08  /* sta: wide scsi send           [W]*/
+	#define   WSR     0x01  /* sta: wide scsi received       [W]*/
+
+/*03*/  u8	nc_scntl3;    /* cnf system clock dependent       */
+	#define   EWS     0x08  /* cmd: enable wide scsi         [W]*/
+	#define   ULTRA   0x80  /* cmd: ULTRA enable                */
+				/* bits 0-2, 7 rsvd for C1010       */
+
+/*04*/  u8	nc_scid;	/* cnf host adapter scsi address    */
+	#define   RRE     0x40  /* r/w:e enable response to resel.  */
+	#define   SRE     0x20  /* r/w:e enable response to select  */
+
+/*05*/  u8	nc_sxfer;	/* ### Sync speed and count         */
+				/* bits 6-7 rsvd for C1010          */
+
+/*06*/  u8	nc_sdid;	/* ### Destination-ID               */
+
+/*07*/  u8	nc_gpreg;	/* ??? IO-Pins                      */
+
+/*08*/  u8	nc_sfbr;	/* ### First byte in phase          */
+
+/*09*/  u8	nc_socl;
+	#define   CREQ	  0x80	/* r/w: SCSI-REQ                    */
+	#define   CACK	  0x40	/* r/w: SCSI-ACK                    */
+	#define   CBSY	  0x20	/* r/w: SCSI-BSY                    */
+	#define   CSEL	  0x10	/* r/w: SCSI-SEL                    */
+	#define   CATN	  0x08	/* r/w: SCSI-ATN                    */
+	#define   CMSG	  0x04	/* r/w: SCSI-MSG                    */
+	#define   CC_D	  0x02	/* r/w: SCSI-C_D                    */
+	#define   CI_O	  0x01	/* r/w: SCSI-I_O                    */
+
+/*0a*/  u8	nc_ssid;
+
+/*0b*/  u8	nc_sbcl;
+
+/*0c*/  u8	nc_dstat;
+        #define   DFE     0x80  /* sta: dma fifo empty              */
+        #define   MDPE    0x40  /* int: master data parity error    */
+        #define   BF      0x20  /* int: script: bus fault           */
+        #define   ABRT    0x10  /* int: script: command aborted     */
+        #define   SSI     0x08  /* int: script: single step         */
+        #define   SIR     0x04  /* int: script: interrupt instruct. */
+        #define   IID     0x01  /* int: script: illegal instruct.   */
+
+/*0d*/  u8	nc_sstat0;
+        #define   ILF     0x80  /* sta: data in SIDL register lsb   */
+        #define   ORF     0x40  /* sta: data in SODR register lsb   */
+        #define   OLF     0x20  /* sta: data in SODL register lsb   */
+        #define   AIP     0x10  /* sta: arbitration in progress     */
+        #define   LOA     0x08  /* sta: arbitration lost            */
+        #define   WOA     0x04  /* sta: arbitration won             */
+        #define   IRST    0x02  /* sta: scsi reset signal           */
+        #define   SDP     0x01  /* sta: scsi parity signal          */
+
+/*0e*/  u8	nc_sstat1;
+	#define   FF3210  0xf0	/* sta: bytes in the scsi fifo      */
+
+/*0f*/  u8	nc_sstat2;
+        #define   ILF1    0x80  /* sta: data in SIDL register msb[W]*/
+        #define   ORF1    0x40  /* sta: data in SODR register msb[W]*/
+        #define   OLF1    0x20  /* sta: data in SODL register msb[W]*/
+        #define   DM      0x04  /* sta: DIFFSENS mismatch (895/6 only) */
+        #define   LDSC    0x02  /* sta: disconnect & reconnect      */
+
+/*10*/  u8	nc_dsa;	/* --> Base page                    */
+/*11*/  u8	nc_dsa1;
+/*12*/  u8	nc_dsa2;
+/*13*/  u8	nc_dsa3;
+
+/*14*/  u8	nc_istat;	/* --> Main Command and status      */
+        #define   CABRT   0x80  /* cmd: abort current operation     */
+        #define   SRST    0x40  /* mod: reset chip                  */
+        #define   SIGP    0x20  /* r/w: message from host to ncr    */
+        #define   SEM     0x10  /* r/w: message between host + ncr  */
+        #define   CON     0x08  /* sta: connected to scsi           */
+        #define   INTF    0x04  /* sta: int on the fly (reset by wr)*/
+        #define   SIP     0x02  /* sta: scsi-interrupt              */
+        #define   DIP     0x01  /* sta: host/script interrupt       */
+
+/*15*/  u8	nc_istat1;	/* 896 and later cores only */
+        #define   FLSH    0x04  /* sta: chip is flushing            */
+        #define   SRUN    0x02  /* sta: scripts are running         */
+        #define   SIRQD   0x01  /* r/w: disable INT pin             */
+
+/*16*/  u8	nc_mbox0;	/* 896 and later cores only */
+/*17*/  u8	nc_mbox1;	/* 896 and later cores only */
+
+/*18*/	u8	nc_ctest0;
+	#define   EHP     0x04	/* 720 even host parity             */
+/*19*/  u8	nc_ctest1;
+
+/*1a*/  u8	nc_ctest2;
+	#define   CSIGP   0x40
+				/* bits 0-2,7 rsvd for C1010        */
+
+/*1b*/  u8	nc_ctest3;
+	#define   FLF     0x08  /* cmd: flush dma fifo              */
+	#define   CLF	  0x04	/* cmd: clear dma fifo		    */
+	#define   FM      0x02  /* mod: fetch pin mode              */
+	#define   WRIE    0x01  /* mod: write and invalidate enable */
+				/* bits 4-7 rsvd for C1010          */
+
+/*1c*/  u32    nc_temp;	/* ### Temporary stack              */
+
+/*20*/	u8	nc_dfifo;
+/*21*/  u8	nc_ctest4;
+	#define   MUX     0x80  /* 720 host bus multiplex mode      */
+	#define   BDIS    0x80  /* mod: burst disable               */
+	#define   MPEE    0x08  /* mod: master parity error enable  */
+
+/*22*/  u8	nc_ctest5;
+	#define   DFS     0x20  /* mod: dma fifo size               */
+				/* bits 0-1, 3-7 rsvd for C1010          */
+/*23*/  u8	nc_ctest6;
+
+/*24*/  u32    nc_dbc;	/* ### Byte count and command       */
+/*28*/  u32    nc_dnad;	/* ### Next command register        */
+/*2c*/  u32    nc_dsp;	/* --> Script Pointer               */
+/*30*/  u32    nc_dsps;	/* --> Script pointer save/opcode#2 */
+
+/*34*/  u8	nc_scratcha;  /* Temporary register a            */
+/*35*/  u8	nc_scratcha1;
+/*36*/  u8	nc_scratcha2;
+/*37*/  u8	nc_scratcha3;
+
+/*38*/  u8	nc_dmode;
+	#define   BL_2    0x80  /* mod: burst length shift value +2 */
+	#define   BL_1    0x40  /* mod: burst length shift value +1 */
+	#define   ERL     0x08  /* mod: enable read line            */
+	#define   ERMP    0x04  /* mod: enable read multiple        */
+	#define   BOF     0x02  /* mod: burst op code fetch         */
+
+/*39*/  u8	nc_dien;
+/*3a*/  u8	nc_sbr;
+
+/*3b*/  u8	nc_dcntl;	/* --> Script execution control     */
+	#define   CLSE    0x80  /* mod: cache line size enable      */
+	#define   PFF     0x40  /* cmd: pre-fetch flush             */
+	#define   PFEN    0x20  /* mod: pre-fetch enable            */
+	#define   EA      0x20  /* mod: 720 enable-ack              */
+	#define   SSM     0x10  /* mod: single step mode            */
+	#define   IRQM    0x08  /* mod: irq mode (1 = totem pole !) */
+	#define   STD     0x04  /* cmd: start dma mode              */
+	#define   IRQD    0x02  /* mod: irq disable                 */
+ 	#define	  NOCOM   0x01	/* cmd: protect sfbr while reselect */
+				/* bits 0-1 rsvd for C1010          */
+
+/*3c*/  u32	nc_adder;
+
+/*40*/  u16	nc_sien;	/* -->: interrupt enable            */
+/*42*/  u16	nc_sist;	/* <--: interrupt status            */
+        #define   SBMC    0x1000/* sta: SCSI Bus Mode Change (895/6 only) */
+        #define   STO     0x0400/* sta: timeout (select)            */
+        #define   GEN     0x0200/* sta: timeout (general)           */
+        #define   HTH     0x0100/* sta: timeout (handshake)         */
+        #define   MA      0x80  /* sta: phase mismatch              */
+        #define   CMP     0x40  /* sta: arbitration complete        */
+        #define   SEL     0x20  /* sta: selected by another device  */
+        #define   RSL     0x10  /* sta: reselected by another device*/
+        #define   SGE     0x08  /* sta: gross error (over/underflow)*/
+        #define   UDC     0x04  /* sta: unexpected disconnect       */
+        #define   RST     0x02  /* sta: scsi bus reset detected     */
+        #define   PAR     0x01  /* sta: scsi parity error           */
+
+/*44*/  u8	nc_slpar;
+/*45*/  u8	nc_swide;
+/*46*/  u8	nc_macntl;
+/*47*/  u8	nc_gpcntl;
+/*48*/  u8	nc_stime0;    /* cmd: timeout for select&handshake*/
+/*49*/  u8	nc_stime1;    /* cmd: timeout user defined        */
+/*4a*/  u16   nc_respid;    /* sta: Reselect-IDs                */
+
+/*4c*/  u8	nc_stest0;
+
+/*4d*/  u8	nc_stest1;
+	#define   SCLK    0x80	/* Use the PCI clock as SCSI clock	*/
+	#define   DBLEN   0x08	/* clock doubler running		*/
+	#define   DBLSEL  0x04	/* clock doubler selected		*/
+  
+
+/*4e*/  u8	nc_stest2;
+	#define   ROF     0x40	/* reset scsi offset (after gross error!) */
+	#define   DIF     0x20  /* 720 SCSI differential mode             */
+	#define   EXT     0x02  /* extended filtering                     */
+
+/*4f*/  u8	nc_stest3;
+	#define   TE     0x80	/* c: tolerAnt enable */
+	#define   HSC    0x20	/* c: Halt SCSI Clock */
+	#define   CSF    0x02	/* c: clear scsi fifo */
+
+/*50*/  u16   nc_sidl;	/* Lowlevel: latched from scsi data */
+/*52*/  u8	nc_stest4;
+	#define   SMODE  0xc0	/* SCSI bus mode      (895/6 only) */
+	#define    SMODE_HVD 0x40	/* High Voltage Differential       */
+	#define    SMODE_SE  0x80	/* Single Ended                    */
+	#define    SMODE_LVD 0xc0	/* Low Voltage Differential        */
+	#define   LCKFRQ 0x20	/* Frequency Lock (895/6 only)     */
+				/* bits 0-5 rsvd for C1010          */
+
+/*53*/  u8	nc_53_;
+/*54*/  u16	nc_sodl;	/* Lowlevel: data out to scsi data  */
+/*56*/	u8	nc_ccntl0;	/* Chip Control 0 (896)             */
+	#define   ENPMJ  0x80	/* Enable Phase Mismatch Jump       */
+	#define   PMJCTL 0x40	/* Phase Mismatch Jump Control      */
+	#define   ENNDJ  0x20	/* Enable Non Data PM Jump          */
+	#define   DISFC  0x10	/* Disable Auto FIFO Clear          */
+	#define   DILS   0x02	/* Disable Internal Load/Store      */
+	#define   DPR    0x01	/* Disable Pipe Req                 */
+
+/*57*/	u8	nc_ccntl1;	/* Chip Control 1 (896)             */
+	#define   ZMOD   0x80	/* High Impedance Mode              */
+	#define	  DIC	 0x10	/* Disable Internal Cycles	    */
+	#define   DDAC   0x08	/* Disable Dual Address Cycle       */
+	#define   XTIMOD 0x04	/* 64-bit Table Ind. Indexing Mode  */
+	#define   EXTIBMV 0x02	/* Enable 64-bit Table Ind. BMOV    */
+	#define   EXDBMV 0x01	/* Enable 64-bit Direct BMOV        */
+
+/*58*/  u16	nc_sbdl;	/* Lowlevel: data from scsi data    */
+/*5a*/  u16	nc_5a_;
+
+/*5c*/  u8	nc_scr0;	/* Working register B               */
+/*5d*/  u8	nc_scr1;	/*                                  */
+/*5e*/  u8	nc_scr2;	/*                                  */
+/*5f*/  u8	nc_scr3;	/*                                  */
+
+/*60*/  u8	nc_scrx[64];	/* Working register C-R             */
+/*a0*/	u32	nc_mmrs;	/* Memory Move Read Selector        */
+/*a4*/	u32	nc_mmws;	/* Memory Move Write Selector       */
+/*a8*/	u32	nc_sfs;		/* Script Fetch Selector            */
+/*ac*/	u32	nc_drs;		/* DSA Relative Selector            */
+/*b0*/	u32	nc_sbms;	/* Static Block Move Selector       */
+/*b4*/	u32	nc_dbms;	/* Dynamic Block Move Selector      */
+/*b8*/	u32	nc_dnad64;	/* DMA Next Address 64              */
+/*bc*/	u16	nc_scntl4;	/* C1010 only                       */
+	#define   U3EN   0x80	/* Enable Ultra 3                   */
+	#define   AIPEN	 0x40   /* Allow check upper byte lanes     */
+	#define   XCLKH_DT 0x08 /* Extra clock of data hold on DT
+					transfer edge	            */
+	#define   XCLKH_ST 0x04 /* Extra clock of data hold on ST
+					transfer edge	            */
+
+/*be*/  u8	nc_aipcntl0;	/* Epat Control 1 C1010 only        */
+/*bf*/  u8	nc_aipcntl1;	/* AIP Control C1010_66 Only        */
+
+/*c0*/	u32	nc_pmjad1;	/* Phase Mismatch Jump Address 1    */
+/*c4*/	u32	nc_pmjad2;	/* Phase Mismatch Jump Address 2    */
+/*c8*/	u8	nc_rbc;		/* Remaining Byte Count             */
+/*c9*/	u8	nc_rbc1;	/*                                  */
+/*ca*/	u8	nc_rbc2;	/*                                  */
+/*cb*/	u8	nc_rbc3;	/*                                  */
+
+/*cc*/	u8	nc_ua;		/* Updated Address                  */
+/*cd*/	u8	nc_ua1;		/*                                  */
+/*ce*/	u8	nc_ua2;		/*                                  */
+/*cf*/	u8	nc_ua3;		/*                                  */
+/*d0*/	u32	nc_esa;		/* Entry Storage Address            */
+/*d4*/	u8	nc_ia;		/* Instruction Address              */
+/*d5*/	u8	nc_ia1;
+/*d6*/	u8	nc_ia2;
+/*d7*/	u8	nc_ia3;
+/*d8*/	u32	nc_sbc;		/* SCSI Byte Count (3 bytes only)   */
+/*dc*/	u32	nc_csbc;	/* Cumulative SCSI Byte Count       */
+
+				/* Following for C1010 only         */
+/*e0*/  u16	nc_crcpad;	/* CRC Value                        */
+/*e2*/  u8	nc_crccntl0;	/* CRC control register             */
+	#define   SNDCRC  0x10	/* Send CRC Request                 */
+/*e3*/  u8	nc_crccntl1;	/* CRC control register             */
+/*e4*/  u32	nc_crcdata;	/* CRC data register                */ 
+/*e8*/  u32	nc_e8_;		/* rsvd 			    */
+/*ec*/  u32	nc_ec_;		/* rsvd 			    */
+/*f0*/  u16	nc_dfbc;	/* DMA FIFO byte count              */ 
+
+};
+
+/*-----------------------------------------------------------
+**
+**	Utility macros for the script.
+**
+**-----------------------------------------------------------
+*/
+
+#define REGJ(p,r) (offsetof(struct ncr_reg, p ## r))
+#define REG(r) REGJ (nc_, r)
+
+typedef u32 ncrcmd;
+
+/*-----------------------------------------------------------
+**
+**	SCSI phases
+**
+**	DT phases illegal for ncr driver.
+**
+**-----------------------------------------------------------
+*/
+
+#define	SCR_DATA_OUT	0x00000000
+#define	SCR_DATA_IN	0x01000000
+#define	SCR_COMMAND	0x02000000
+#define	SCR_STATUS	0x03000000
+#define SCR_DT_DATA_OUT	0x04000000
+#define SCR_DT_DATA_IN	0x05000000
+#define SCR_MSG_OUT	0x06000000
+#define SCR_MSG_IN      0x07000000
+
+#define SCR_ILG_OUT	0x04000000
+#define SCR_ILG_IN	0x05000000
+
+/*-----------------------------------------------------------
+**
+**	Data transfer via SCSI.
+**
+**-----------------------------------------------------------
+**
+**	MOVE_ABS (LEN)
+**	<<start address>>
+**
+**	MOVE_IND (LEN)
+**	<<dnad_offset>>
+**
+**	MOVE_TBL
+**	<<dnad_offset>>
+**
+**-----------------------------------------------------------
+*/
+
+#define OPC_MOVE          0x08000000
+
+#define SCR_MOVE_ABS(l) ((0x00000000 | OPC_MOVE) | (l))
+#define SCR_MOVE_IND(l) ((0x20000000 | OPC_MOVE) | (l))
+#define SCR_MOVE_TBL     (0x10000000 | OPC_MOVE)
+
+#define SCR_CHMOV_ABS(l) ((0x00000000) | (l))
+#define SCR_CHMOV_IND(l) ((0x20000000) | (l))
+#define SCR_CHMOV_TBL     (0x10000000)
+
+struct scr_tblmove {
+        u32  size;
+        u32  addr;
+};
+
+/*-----------------------------------------------------------
+**
+**	Selection
+**
+**-----------------------------------------------------------
+**
+**	SEL_ABS | SCR_ID (0..15)    [ | REL_JMP]
+**	<<alternate_address>>
+**
+**	SEL_TBL | << dnad_offset>>  [ | REL_JMP]
+**	<<alternate_address>>
+**
+**-----------------------------------------------------------
+*/
+
+#define	SCR_SEL_ABS	0x40000000
+#define	SCR_SEL_ABS_ATN	0x41000000
+#define	SCR_SEL_TBL	0x42000000
+#define	SCR_SEL_TBL_ATN	0x43000000
+
+
+#ifdef SCSI_NCR_BIG_ENDIAN
+struct scr_tblsel {
+        u8	sel_scntl3;
+        u8	sel_id;
+        u8	sel_sxfer;
+        u8	sel_scntl4;	
+};
+#else
+struct scr_tblsel {
+        u8	sel_scntl4;	
+        u8	sel_sxfer;
+        u8	sel_id;
+        u8	sel_scntl3;
+};
+#endif
+
+#define SCR_JMP_REL     0x04000000
+#define SCR_ID(id)	(((u32)(id)) << 16)
+
+/*-----------------------------------------------------------
+**
+**	Waiting for Disconnect or Reselect
+**
+**-----------------------------------------------------------
+**
+**	WAIT_DISC
+**	dummy: <<alternate_address>>
+**
+**	WAIT_RESEL
+**	<<alternate_address>>
+**
+**-----------------------------------------------------------
+*/
+
+#define	SCR_WAIT_DISC	0x48000000
+#define SCR_WAIT_RESEL  0x50000000
+
+/*-----------------------------------------------------------
+**
+**	Bit Set / Reset
+**
+**-----------------------------------------------------------
+**
+**	SET (flags {|.. })
+**
+**	CLR (flags {|.. })
+**
+**-----------------------------------------------------------
+*/
+
+#define SCR_SET(f)     (0x58000000 | (f))
+#define SCR_CLR(f)     (0x60000000 | (f))
+
+#define	SCR_CARRY	0x00000400
+#define	SCR_TRG		0x00000200
+#define	SCR_ACK		0x00000040
+#define	SCR_ATN		0x00000008
+
+
+
+
+/*-----------------------------------------------------------
+**
+**	Memory to memory move
+**
+**-----------------------------------------------------------
+**
+**	COPY (bytecount)
+**	<< source_address >>
+**	<< destination_address >>
+**
+**	SCR_COPY   sets the NO FLUSH option by default.
+**	SCR_COPY_F does not set this option.
+**
+**	For chips which do not support this option,
+**	ncr_copy_and_bind() will remove this bit.
+**-----------------------------------------------------------
+*/
+
+#define SCR_NO_FLUSH 0x01000000
+
+#define SCR_COPY(n) (0xc0000000 | SCR_NO_FLUSH | (n))
+#define SCR_COPY_F(n) (0xc0000000 | (n))
+
+/*-----------------------------------------------------------
+**
+**	Register move and binary operations
+**
+**-----------------------------------------------------------
+**
+**	SFBR_REG (reg, op, data)        reg  = SFBR op data
+**	<< 0 >>
+**
+**	REG_SFBR (reg, op, data)        SFBR = reg op data
+**	<< 0 >>
+**
+**	REG_REG  (reg, op, data)        reg  = reg op data
+**	<< 0 >>
+**
+**-----------------------------------------------------------
+**	On 810A, 860, 825A, 875, 895 and 896 chips the content 
+**	of SFBR register can be used as data (SCR_SFBR_DATA).
+**	The 896 has additionnal IO registers starting at 
+**	offset 0x80. Bit 7 of register offset is stored in 
+**	bit 7 of the SCRIPTS instruction first DWORD.
+**-----------------------------------------------------------
+*/
+
+#define SCR_REG_OFS(ofs) ((((ofs) & 0x7f) << 16ul) + ((ofs) & 0x80)) 
+
+#define SCR_SFBR_REG(reg,op,data) \
+        (0x68000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul))
+
+#define SCR_REG_SFBR(reg,op,data) \
+        (0x70000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul))
+
+#define SCR_REG_REG(reg,op,data) \
+        (0x78000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul))
+
+
+#define      SCR_LOAD   0x00000000
+#define      SCR_SHL    0x01000000
+#define      SCR_OR     0x02000000
+#define      SCR_XOR    0x03000000
+#define      SCR_AND    0x04000000
+#define      SCR_SHR    0x05000000
+#define      SCR_ADD    0x06000000
+#define      SCR_ADDC   0x07000000
+
+#define      SCR_SFBR_DATA   (0x00800000>>8ul)	/* Use SFBR as data */
+
+/*-----------------------------------------------------------
+**
+**	FROM_REG (reg)		  SFBR = reg
+**	<< 0 >>
+**
+**	TO_REG	 (reg)		  reg  = SFBR
+**	<< 0 >>
+**
+**	LOAD_REG (reg, data)	  reg  = <data>
+**	<< 0 >>
+**
+**	LOAD_SFBR(data) 	  SFBR = <data>
+**	<< 0 >>
+**
+**-----------------------------------------------------------
+*/
+
+#define	SCR_FROM_REG(reg) \
+	SCR_REG_SFBR(reg,SCR_OR,0)
+
+#define	SCR_TO_REG(reg) \
+	SCR_SFBR_REG(reg,SCR_OR,0)
+
+#define	SCR_LOAD_REG(reg,data) \
+	SCR_REG_REG(reg,SCR_LOAD,data)
+
+#define SCR_LOAD_SFBR(data) \
+        (SCR_REG_SFBR (gpreg, SCR_LOAD, data))
+
+/*-----------------------------------------------------------
+**
+**	LOAD  from memory   to register.
+**	STORE from register to memory.
+**
+**	Only supported by 810A, 860, 825A, 875, 895 and 896.
+**
+**-----------------------------------------------------------
+**
+**	LOAD_ABS (LEN)
+**	<<start address>>
+**
+**	LOAD_REL (LEN)        (DSA relative)
+**	<<dsa_offset>>
+**
+**-----------------------------------------------------------
+*/
+
+#define SCR_REG_OFS2(ofs) (((ofs) & 0xff) << 16ul)
+#define SCR_NO_FLUSH2	0x02000000
+#define SCR_DSA_REL2	0x10000000
+
+#define SCR_LOAD_R(reg, how, n) \
+        (0xe1000000 | how | (SCR_REG_OFS2(REG(reg))) | (n))
+
+#define SCR_STORE_R(reg, how, n) \
+        (0xe0000000 | how | (SCR_REG_OFS2(REG(reg))) | (n))
+
+#define SCR_LOAD_ABS(reg, n)	SCR_LOAD_R(reg, SCR_NO_FLUSH2, n)
+#define SCR_LOAD_REL(reg, n)	SCR_LOAD_R(reg, SCR_NO_FLUSH2|SCR_DSA_REL2, n)
+#define SCR_LOAD_ABS_F(reg, n)	SCR_LOAD_R(reg, 0, n)
+#define SCR_LOAD_REL_F(reg, n)	SCR_LOAD_R(reg, SCR_DSA_REL2, n)
+
+#define SCR_STORE_ABS(reg, n)	SCR_STORE_R(reg, SCR_NO_FLUSH2, n)
+#define SCR_STORE_REL(reg, n)	SCR_STORE_R(reg, SCR_NO_FLUSH2|SCR_DSA_REL2,n)
+#define SCR_STORE_ABS_F(reg, n)	SCR_STORE_R(reg, 0, n)
+#define SCR_STORE_REL_F(reg, n)	SCR_STORE_R(reg, SCR_DSA_REL2, n)
+
+
+/*-----------------------------------------------------------
+**
+**	Waiting for Disconnect or Reselect
+**
+**-----------------------------------------------------------
+**
+**	JUMP            [ | IFTRUE/IFFALSE ( ... ) ]
+**	<<address>>
+**
+**	JUMPR           [ | IFTRUE/IFFALSE ( ... ) ]
+**	<<distance>>
+**
+**	CALL            [ | IFTRUE/IFFALSE ( ... ) ]
+**	<<address>>
+**
+**	CALLR           [ | IFTRUE/IFFALSE ( ... ) ]
+**	<<distance>>
+**
+**	RETURN          [ | IFTRUE/IFFALSE ( ... ) ]
+**	<<dummy>>
+**
+**	INT             [ | IFTRUE/IFFALSE ( ... ) ]
+**	<<ident>>
+**
+**	INT_FLY         [ | IFTRUE/IFFALSE ( ... ) ]
+**	<<ident>>
+**
+**	Conditions:
+**	     WHEN (phase)
+**	     IF   (phase)
+**	     CARRYSET
+**	     DATA (data, mask)
+**
+**-----------------------------------------------------------
+*/
+
+#define SCR_NO_OP       0x80000000
+#define SCR_JUMP        0x80080000
+#define SCR_JUMP64      0x80480000
+#define SCR_JUMPR       0x80880000
+#define SCR_CALL        0x88080000
+#define SCR_CALLR       0x88880000
+#define SCR_RETURN      0x90080000
+#define SCR_INT         0x98080000
+#define SCR_INT_FLY     0x98180000
+
+#define IFFALSE(arg)   (0x00080000 | (arg))
+#define IFTRUE(arg)    (0x00000000 | (arg))
+
+#define WHEN(phase)    (0x00030000 | (phase))
+#define IF(phase)      (0x00020000 | (phase))
+
+#define DATA(D)        (0x00040000 | ((D) & 0xff))
+#define MASK(D,M)      (0x00040000 | (((M ^ 0xff) & 0xff) << 8ul)|((D) & 0xff))
+
+#define CARRYSET       (0x00200000)
+
+/*-----------------------------------------------------------
+**
+**	SCSI  constants.
+**
+**-----------------------------------------------------------
+*/
+
+/*
+**	Messages
+*/
+
+#define	M_COMPLETE	COMMAND_COMPLETE
+#define	M_EXTENDED	EXTENDED_MESSAGE
+#define	M_SAVE_DP	SAVE_POINTERS
+#define	M_RESTORE_DP	RESTORE_POINTERS
+#define	M_DISCONNECT	DISCONNECT
+#define	M_ID_ERROR	INITIATOR_ERROR
+#define	M_ABORT		ABORT_TASK_SET
+#define	M_REJECT	MESSAGE_REJECT
+#define	M_NOOP		NOP
+#define	M_PARITY	MSG_PARITY_ERROR
+#define	M_LCOMPLETE	LINKED_CMD_COMPLETE
+#define	M_FCOMPLETE	LINKED_FLG_CMD_COMPLETE
+#define	M_RESET		TARGET_RESET
+#define	M_ABORT_TAG	ABORT_TASK
+#define	M_CLEAR_QUEUE	CLEAR_TASK_SET
+#define	M_INIT_REC	INITIATE_RECOVERY
+#define	M_REL_REC	RELEASE_RECOVERY
+#define	M_TERMINATE	(0x11)
+#define	M_SIMPLE_TAG	SIMPLE_QUEUE_TAG
+#define	M_HEAD_TAG	HEAD_OF_QUEUE_TAG
+#define	M_ORDERED_TAG	ORDERED_QUEUE_TAG
+#define	M_IGN_RESIDUE	IGNORE_WIDE_RESIDUE
+#define	M_IDENTIFY   	(0x80)
+
+#define	M_X_MODIFY_DP	EXTENDED_MODIFY_DATA_POINTER
+#define	M_X_SYNC_REQ	EXTENDED_SDTR
+#define	M_X_WIDE_REQ	EXTENDED_WDTR
+#define	M_X_PPR_REQ	EXTENDED_PPR
+
+/*
+**	Status
+*/
+
+#define	S_GOOD		(0x00)
+#define	S_CHECK_COND	(0x02)
+#define	S_COND_MET	(0x04)
+#define	S_BUSY		(0x08)
+#define	S_INT		(0x10)
+#define	S_INT_COND_MET	(0x14)
+#define	S_CONFLICT	(0x18)
+#define	S_TERMINATED	(0x20)
+#define	S_QUEUE_FULL	(0x28)
+#define	S_ILLEGAL	(0xff)
+#define	S_SENSE		(0x80)
+
+/*
+ * End of ncrreg from FreeBSD
+ */
 
 /*
 	Build a scatter/gather entry.
diff --git a/drivers/scsi/sym53c8xx_comm.h b/drivers/scsi/sym53c8xx_comm.h
deleted file mode 100644
index 20ae2b1..0000000
--- a/drivers/scsi/sym53c8xx_comm.h
+++ /dev/null
@@ -1,792 +0,0 @@
-/******************************************************************************
-**  High Performance device driver for the Symbios 53C896 controller.
-**
-**  Copyright (C) 1998-2001  Gerard Roudier <groudier@free.fr>
-**
-**  This driver also supports all the Symbios 53C8XX controller family, 
-**  except 53C810 revisions < 16, 53C825 revisions < 16 and all 
-**  revisions of 53C815 controllers.
-**
-**  This driver is based on the Linux port of the FreeBSD ncr driver.
-** 
-**  Copyright (C) 1994  Wolfgang Stanglmeier
-**  
-**-----------------------------------------------------------------------------
-**  
-**  This program is free software; you can redistribute it and/or modify
-**  it under the terms of the GNU General Public License as published by
-**  the Free Software Foundation; either version 2 of the License, or
-**  (at your option) any later version.
-**
-**  This program is distributed in the hope that it will be useful,
-**  but WITHOUT ANY WARRANTY; without even the implied warranty of
-**  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-**  GNU General Public License for more details.
-**
-**  You should have received a copy of the GNU General Public License
-**  along with this program; if not, write to the Free Software
-**  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-**
-**-----------------------------------------------------------------------------
-**
-**  The Linux port of the FreeBSD ncr driver has been achieved in 
-**  november 1995 by:
-**
-**          Gerard Roudier              <groudier@free.fr>
-**
-**  Being given that this driver originates from the FreeBSD version, and
-**  in order to keep synergy on both, any suggested enhancements and corrections
-**  received on Linux are automatically a potential candidate for the FreeBSD 
-**  version.
-**
-**  The original driver has been written for 386bsd and FreeBSD by
-**          Wolfgang Stanglmeier        <wolf@cologne.de>
-**          Stefan Esser                <se@mi.Uni-Koeln.de>
-**
-**-----------------------------------------------------------------------------
-**
-**  Major contributions:
-**  --------------------
-**
-**  NVRAM detection and reading.
-**    Copyright (C) 1997 Richard Waltham <dormouse@farsrobt.demon.co.uk>
-**
-*******************************************************************************
-*/
-
-/*==========================================================
-**
-**	Debugging tags
-**
-**==========================================================
-*/
-
-#define DEBUG_ALLOC    (0x0001)
-#define DEBUG_PHASE    (0x0002)
-#define DEBUG_QUEUE    (0x0008)
-#define DEBUG_RESULT   (0x0010)
-#define DEBUG_POINTER  (0x0020)
-#define DEBUG_SCRIPT   (0x0040)
-#define DEBUG_TINY     (0x0080)
-#define DEBUG_TIMING   (0x0100)
-#define DEBUG_NEGO     (0x0200)
-#define DEBUG_TAGS     (0x0400)
-#define DEBUG_SCATTER  (0x0800)
-#define DEBUG_IC        (0x1000)
-
-/*
-**    Enable/Disable debug messages.
-**    Can be changed at runtime too.
-*/
-
-#ifdef SCSI_NCR_DEBUG_INFO_SUPPORT
-static int ncr_debug = SCSI_NCR_DEBUG_FLAGS;
-	#define DEBUG_FLAGS ncr_debug
-#else
-	#define DEBUG_FLAGS	SCSI_NCR_DEBUG_FLAGS
-#endif
-
-static inline struct list_head *ncr_list_pop(struct list_head *head)
-{
-	if (!list_empty(head)) {
-		struct list_head *elem = head->next;
-
-		list_del(elem);
-		return elem;
-	}
-
-	return NULL;
-}
-
-#ifdef __sparc__
-#include <asm/irq.h>
-#endif
-
-/*==========================================================
-**
-**	Simple power of two buddy-like allocator.
-**
-**	This simple code is not intended to be fast, but to 
-**	provide power of 2 aligned memory allocations.
-**	Since the SCRIPTS processor only supplies 8 bit 
-**	arithmetic, this allocator allows simple and fast 
-**	address calculations  from the SCRIPTS code.
-**	In addition, cache line alignment is guaranteed for 
-**	power of 2 cache line size.
-**	Enhanced in linux-2.3.44 to provide a memory pool 
-**	per pcidev to support dynamic dma mapping. (I would 
-**	have preferred a real bus astraction, btw).
-**
-**==========================================================
-*/
-
-#define MEMO_SHIFT	4	/* 16 bytes minimum memory chunk */
-#if PAGE_SIZE >= 8192
-#define MEMO_PAGE_ORDER	0	/* 1 PAGE  maximum */
-#else
-#define MEMO_PAGE_ORDER	1	/* 2 PAGES maximum */
-#endif
-#define MEMO_FREE_UNUSED	/* Free unused pages immediately */
-#define MEMO_WARN	1
-#define MEMO_GFP_FLAGS	GFP_ATOMIC
-#define MEMO_CLUSTER_SHIFT	(PAGE_SHIFT+MEMO_PAGE_ORDER)
-#define MEMO_CLUSTER_SIZE	(1UL << MEMO_CLUSTER_SHIFT)
-#define MEMO_CLUSTER_MASK	(MEMO_CLUSTER_SIZE-1)
-
-typedef u_long m_addr_t;	/* Enough bits to bit-hack addresses */
-typedef struct device *m_bush_t;	/* Something that addresses DMAable */
-
-typedef struct m_link {		/* Link between free memory chunks */
-	struct m_link *next;
-} m_link_s;
-
-typedef struct m_vtob {		/* Virtual to Bus address translation */
-	struct m_vtob *next;
-	m_addr_t vaddr;
-	m_addr_t baddr;
-} m_vtob_s;
-#define VTOB_HASH_SHIFT		5
-#define VTOB_HASH_SIZE		(1UL << VTOB_HASH_SHIFT)
-#define VTOB_HASH_MASK		(VTOB_HASH_SIZE-1)
-#define VTOB_HASH_CODE(m)	\
-	((((m_addr_t) (m)) >> MEMO_CLUSTER_SHIFT) & VTOB_HASH_MASK)
-
-typedef struct m_pool {		/* Memory pool of a given kind */
-	m_bush_t bush;
-	m_addr_t (*getp)(struct m_pool *);
-	void (*freep)(struct m_pool *, m_addr_t);
-	int nump;
-	m_vtob_s *(vtob[VTOB_HASH_SIZE]);
-	struct m_pool *next;
-	struct m_link h[PAGE_SHIFT-MEMO_SHIFT+MEMO_PAGE_ORDER+1];
-} m_pool_s;
-
-static void *___m_alloc(m_pool_s *mp, int size)
-{
-	int i = 0;
-	int s = (1 << MEMO_SHIFT);
-	int j;
-	m_addr_t a;
-	m_link_s *h = mp->h;
-
-	if (size > (PAGE_SIZE << MEMO_PAGE_ORDER))
-		return NULL;
-
-	while (size > s) {
-		s <<= 1;
-		++i;
-	}
-
-	j = i;
-	while (!h[j].next) {
-		if (s == (PAGE_SIZE << MEMO_PAGE_ORDER)) {
-			h[j].next = (m_link_s *)mp->getp(mp);
-			if (h[j].next)
-				h[j].next->next = NULL;
-			break;
-		}
-		++j;
-		s <<= 1;
-	}
-	a = (m_addr_t) h[j].next;
-	if (a) {
-		h[j].next = h[j].next->next;
-		while (j > i) {
-			j -= 1;
-			s >>= 1;
-			h[j].next = (m_link_s *) (a+s);
-			h[j].next->next = NULL;
-		}
-	}
-#ifdef DEBUG
-	printk("___m_alloc(%d) = %p\n", size, (void *) a);
-#endif
-	return (void *) a;
-}
-
-static void ___m_free(m_pool_s *mp, void *ptr, int size)
-{
-	int i = 0;
-	int s = (1 << MEMO_SHIFT);
-	m_link_s *q;
-	m_addr_t a, b;
-	m_link_s *h = mp->h;
-
-#ifdef DEBUG
-	printk("___m_free(%p, %d)\n", ptr, size);
-#endif
-
-	if (size > (PAGE_SIZE << MEMO_PAGE_ORDER))
-		return;
-
-	while (size > s) {
-		s <<= 1;
-		++i;
-	}
-
-	a = (m_addr_t) ptr;
-
-	while (1) {
-#ifdef MEMO_FREE_UNUSED
-		if (s == (PAGE_SIZE << MEMO_PAGE_ORDER)) {
-			mp->freep(mp, a);
-			break;
-		}
-#endif
-		b = a ^ s;
-		q = &h[i];
-		while (q->next && q->next != (m_link_s *) b) {
-			q = q->next;
-		}
-		if (!q->next) {
-			((m_link_s *) a)->next = h[i].next;
-			h[i].next = (m_link_s *) a;
-			break;
-		}
-		q->next = q->next->next;
-		a = a & b;
-		s <<= 1;
-		++i;
-	}
-}
-
-static DEFINE_SPINLOCK(ncr53c8xx_lock);
-
-static void *__m_calloc2(m_pool_s *mp, int size, char *name, int uflags)
-{
-	void *p;
-
-	p = ___m_alloc(mp, size);
-
-	if (DEBUG_FLAGS & DEBUG_ALLOC)
-		printk ("new %-10s[%4d] @%p.\n", name, size, p);
-
-	if (p)
-		memset(p, 0, size);
-	else if (uflags & MEMO_WARN)
-		printk (NAME53C8XX ": failed to allocate %s[%d]\n", name, size);
-
-	return p;
-}
-
-#define __m_calloc(mp, s, n)	__m_calloc2(mp, s, n, MEMO_WARN)
-
-static void __m_free(m_pool_s *mp, void *ptr, int size, char *name)
-{
-	if (DEBUG_FLAGS & DEBUG_ALLOC)
-		printk ("freeing %-10s[%4d] @%p.\n", name, size, ptr);
-
-	___m_free(mp, ptr, size);
-
-}
-
-/*
- * With pci bus iommu support, we use a default pool of unmapped memory 
- * for memory we donnot need to DMA from/to and one pool per pcidev for 
- * memory accessed by the PCI chip. `mp0' is the default not DMAable pool.
- */
-
-static m_addr_t ___mp0_getp(m_pool_s *mp)
-{
-	m_addr_t m = __get_free_pages(MEMO_GFP_FLAGS, MEMO_PAGE_ORDER);
-	if (m)
-		++mp->nump;
-	return m;
-}
-
-static void ___mp0_freep(m_pool_s *mp, m_addr_t m)
-{
-	free_pages(m, MEMO_PAGE_ORDER);
-	--mp->nump;
-}
-
-static m_pool_s mp0 = {NULL, ___mp0_getp, ___mp0_freep};
-
-/*
- * DMAable pools.
- */
-
-/*
- * With pci bus iommu support, we maintain one pool per pcidev and a 
- * hashed reverse table for virtual to bus physical address translations.
- */
-static m_addr_t ___dma_getp(m_pool_s *mp)
-{
-	m_addr_t vp;
-	m_vtob_s *vbp;
-
-	vbp = __m_calloc(&mp0, sizeof(*vbp), "VTOB");
-	if (vbp) {
-		dma_addr_t daddr;
-		vp = (m_addr_t) dma_alloc_coherent(mp->bush,
-						PAGE_SIZE<<MEMO_PAGE_ORDER,
-						&daddr, GFP_ATOMIC);
-		if (vp) {
-			int hc = VTOB_HASH_CODE(vp);
-			vbp->vaddr = vp;
-			vbp->baddr = daddr;
-			vbp->next = mp->vtob[hc];
-			mp->vtob[hc] = vbp;
-			++mp->nump;
-			return vp;
-		}
-	}
-	if (vbp)
-		__m_free(&mp0, vbp, sizeof(*vbp), "VTOB");
-	return 0;
-}
-
-static void ___dma_freep(m_pool_s *mp, m_addr_t m)
-{
-	m_vtob_s **vbpp, *vbp;
-	int hc = VTOB_HASH_CODE(m);
-
-	vbpp = &mp->vtob[hc];
-	while (*vbpp && (*vbpp)->vaddr != m)
-		vbpp = &(*vbpp)->next;
-	if (*vbpp) {
-		vbp = *vbpp;
-		*vbpp = (*vbpp)->next;
-		dma_free_coherent(mp->bush, PAGE_SIZE<<MEMO_PAGE_ORDER,
-				  (void *)vbp->vaddr, (dma_addr_t)vbp->baddr);
-		__m_free(&mp0, vbp, sizeof(*vbp), "VTOB");
-		--mp->nump;
-	}
-}
-
-static inline m_pool_s *___get_dma_pool(m_bush_t bush)
-{
-	m_pool_s *mp;
-	for (mp = mp0.next; mp && mp->bush != bush; mp = mp->next);
-	return mp;
-}
-
-static m_pool_s *___cre_dma_pool(m_bush_t bush)
-{
-	m_pool_s *mp;
-	mp = __m_calloc(&mp0, sizeof(*mp), "MPOOL");
-	if (mp) {
-		memset(mp, 0, sizeof(*mp));
-		mp->bush = bush;
-		mp->getp = ___dma_getp;
-		mp->freep = ___dma_freep;
-		mp->next = mp0.next;
-		mp0.next = mp;
-	}
-	return mp;
-}
-
-static void ___del_dma_pool(m_pool_s *p)
-{
-	struct m_pool **pp = &mp0.next;
-
-	while (*pp && *pp != p)
-		pp = &(*pp)->next;
-	if (*pp) {
-		*pp = (*pp)->next;
-		__m_free(&mp0, p, sizeof(*p), "MPOOL");
-	}
-}
-
-static void *__m_calloc_dma(m_bush_t bush, int size, char *name)
-{
-	u_long flags;
-	struct m_pool *mp;
-	void *m = NULL;
-
-	spin_lock_irqsave(&ncr53c8xx_lock, flags);
-	mp = ___get_dma_pool(bush);
-	if (!mp)
-		mp = ___cre_dma_pool(bush);
-	if (mp)
-		m = __m_calloc(mp, size, name);
-	if (mp && !mp->nump)
-		___del_dma_pool(mp);
-	spin_unlock_irqrestore(&ncr53c8xx_lock, flags);
-
-	return m;
-}
-
-static void __m_free_dma(m_bush_t bush, void *m, int size, char *name)
-{
-	u_long flags;
-	struct m_pool *mp;
-
-	spin_lock_irqsave(&ncr53c8xx_lock, flags);
-	mp = ___get_dma_pool(bush);
-	if (mp)
-		__m_free(mp, m, size, name);
-	if (mp && !mp->nump)
-		___del_dma_pool(mp);
-	spin_unlock_irqrestore(&ncr53c8xx_lock, flags);
-}
-
-static m_addr_t __vtobus(m_bush_t bush, void *m)
-{
-	u_long flags;
-	m_pool_s *mp;
-	int hc = VTOB_HASH_CODE(m);
-	m_vtob_s *vp = NULL;
-	m_addr_t a = ((m_addr_t) m) & ~MEMO_CLUSTER_MASK;
-
-	spin_lock_irqsave(&ncr53c8xx_lock, flags);
-	mp = ___get_dma_pool(bush);
-	if (mp) {
-		vp = mp->vtob[hc];
-		while (vp && (m_addr_t) vp->vaddr != a)
-			vp = vp->next;
-	}
-	spin_unlock_irqrestore(&ncr53c8xx_lock, flags);
-	return vp ? vp->baddr + (((m_addr_t) m) - a) : 0;
-}
-
-#define _m_calloc_dma(np, s, n)		__m_calloc_dma(np->dev, s, n)
-#define _m_free_dma(np, p, s, n)	__m_free_dma(np->dev, p, s, n)
-#define m_calloc_dma(s, n)		_m_calloc_dma(np, s, n)
-#define m_free_dma(p, s, n)		_m_free_dma(np, p, s, n)
-#define _vtobus(np, p)			__vtobus(np->dev, p)
-#define vtobus(p)			_vtobus(np, p)
-
-/*
- *  Deal with DMA mapping/unmapping.
- */
-
-/* To keep track of the dma mapping (sg/single) that has been set */
-#define __data_mapped	SCp.phase
-#define __data_mapping	SCp.have_data_in
-
-static void __unmap_scsi_data(struct device *dev, struct scsi_cmnd *cmd)
-{
-	switch(cmd->__data_mapped) {
-	case 2:
-		dma_unmap_sg(dev, cmd->buffer, cmd->use_sg,
-				cmd->sc_data_direction);
-		break;
-	case 1:
-		dma_unmap_single(dev, cmd->__data_mapping,
-				 cmd->request_bufflen,
-				 cmd->sc_data_direction);
-		break;
-	}
-	cmd->__data_mapped = 0;
-}
-
-static u_long __map_scsi_single_data(struct device *dev, struct scsi_cmnd *cmd)
-{
-	dma_addr_t mapping;
-
-	if (cmd->request_bufflen == 0)
-		return 0;
-
-	mapping = dma_map_single(dev, cmd->request_buffer,
-				 cmd->request_bufflen,
-				 cmd->sc_data_direction);
-	cmd->__data_mapped = 1;
-	cmd->__data_mapping = mapping;
-
-	return mapping;
-}
-
-static int __map_scsi_sg_data(struct device *dev, struct scsi_cmnd *cmd)
-{
-	int use_sg;
-
-	if (cmd->use_sg == 0)
-		return 0;
-
-	use_sg = dma_map_sg(dev, cmd->buffer, cmd->use_sg,
-			cmd->sc_data_direction);
-	cmd->__data_mapped = 2;
-	cmd->__data_mapping = use_sg;
-
-	return use_sg;
-}
-
-#define unmap_scsi_data(np, cmd)	__unmap_scsi_data(np->dev, cmd)
-#define map_scsi_single_data(np, cmd)	__map_scsi_single_data(np->dev, cmd)
-#define map_scsi_sg_data(np, cmd)	__map_scsi_sg_data(np->dev, cmd)
-
-/*==========================================================
-**
-**	Driver setup.
-**
-**	This structure is initialized from linux config 
-**	options. It can be overridden at boot-up by the boot 
-**	command line.
-**
-**==========================================================
-*/
-static struct ncr_driver_setup
-	driver_setup			= SCSI_NCR_DRIVER_SETUP;
-
-#ifdef	SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT
-static struct ncr_driver_setup
-	driver_safe_setup __initdata	= SCSI_NCR_DRIVER_SAFE_SETUP;
-#endif
-
-#define initverbose (driver_setup.verbose)
-#define bootverbose (np->verbose)
-
-
-/*===================================================================
-**
-**	Driver setup from the boot command line
-**
-**===================================================================
-*/
-
-#ifdef MODULE
-#define	ARG_SEP	' '
-#else
-#define	ARG_SEP	','
-#endif
-
-#define OPT_TAGS		1
-#define OPT_MASTER_PARITY	2
-#define OPT_SCSI_PARITY		3
-#define OPT_DISCONNECTION	4
-#define OPT_SPECIAL_FEATURES	5
-#define OPT_UNUSED_1		6
-#define OPT_FORCE_SYNC_NEGO	7
-#define OPT_REVERSE_PROBE	8
-#define OPT_DEFAULT_SYNC	9
-#define OPT_VERBOSE		10
-#define OPT_DEBUG		11
-#define OPT_BURST_MAX		12
-#define OPT_LED_PIN		13
-#define OPT_MAX_WIDE		14
-#define OPT_SETTLE_DELAY	15
-#define OPT_DIFF_SUPPORT	16
-#define OPT_IRQM		17
-#define OPT_PCI_FIX_UP		18
-#define OPT_BUS_CHECK		19
-#define OPT_OPTIMIZE		20
-#define OPT_RECOVERY		21
-#define OPT_SAFE_SETUP		22
-#define OPT_USE_NVRAM		23
-#define OPT_EXCLUDE		24
-#define OPT_HOST_ID		25
-
-#ifdef SCSI_NCR_IARB_SUPPORT
-#define OPT_IARB		26
-#endif
-
-static char setup_token[] __initdata = 
-	"tags:"   "mpar:"
-	"spar:"   "disc:"
-	"specf:"  "ultra:"
-	"fsn:"    "revprob:"
-	"sync:"   "verb:"
-	"debug:"  "burst:"
-	"led:"    "wide:"
-	"settle:" "diff:"
-	"irqm:"   "pcifix:"
-	"buschk:" "optim:"
-	"recovery:"
-	"safe:"   "nvram:"
-	"excl:"   "hostid:"
-#ifdef SCSI_NCR_IARB_SUPPORT
-	"iarb:"
-#endif
-	;	/* DONNOT REMOVE THIS ';' */
-
-#ifdef MODULE
-#define	ARG_SEP	' '
-#else
-#define	ARG_SEP	','
-#endif
-
-static int __init get_setup_token(char *p)
-{
-	char *cur = setup_token;
-	char *pc;
-	int i = 0;
-
-	while (cur != NULL && (pc = strchr(cur, ':')) != NULL) {
-		++pc;
-		++i;
-		if (!strncmp(p, cur, pc - cur))
-			return i;
-		cur = pc;
-	}
-	return 0;
-}
-
-
-static int __init sym53c8xx__setup(char *str)
-{
-#ifdef SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT
-	char *cur = str;
-	char *pc, *pv;
-	int i, val, c;
-	int xi = 0;
-
-	while (cur != NULL && (pc = strchr(cur, ':')) != NULL) {
-		char *pe;
-
-		val = 0;
-		pv = pc;
-		c = *++pv;
-
-		if	(c == 'n')
-			val = 0;
-		else if	(c == 'y')
-			val = 1;
-		else
-			val = (int) simple_strtoul(pv, &pe, 0);
-
-		switch (get_setup_token(cur)) {
-		case OPT_TAGS:
-			driver_setup.default_tags = val;
-			if (pe && *pe == '/') {
-				i = 0;
-				while (*pe && *pe != ARG_SEP && 
-					i < sizeof(driver_setup.tag_ctrl)-1) {
-					driver_setup.tag_ctrl[i++] = *pe++;
-				}
-				driver_setup.tag_ctrl[i] = '\0';
-			}
-			break;
-		case OPT_MASTER_PARITY:
-			driver_setup.master_parity = val;
-			break;
-		case OPT_SCSI_PARITY:
-			driver_setup.scsi_parity = val;
-			break;
-		case OPT_DISCONNECTION:
-			driver_setup.disconnection = val;
-			break;
-		case OPT_SPECIAL_FEATURES:
-			driver_setup.special_features = val;
-			break;
-		case OPT_FORCE_SYNC_NEGO:
-			driver_setup.force_sync_nego = val;
-			break;
-		case OPT_REVERSE_PROBE:
-			driver_setup.reverse_probe = val;
-			break;
-		case OPT_DEFAULT_SYNC:
-			driver_setup.default_sync = val;
-			break;
-		case OPT_VERBOSE:
-			driver_setup.verbose = val;
-			break;
-		case OPT_DEBUG:
-			driver_setup.debug = val;
-			break;
-		case OPT_BURST_MAX:
-			driver_setup.burst_max = val;
-			break;
-		case OPT_LED_PIN:
-			driver_setup.led_pin = val;
-			break;
-		case OPT_MAX_WIDE:
-			driver_setup.max_wide = val? 1:0;
-			break;
-		case OPT_SETTLE_DELAY:
-			driver_setup.settle_delay = val;
-			break;
-		case OPT_DIFF_SUPPORT:
-			driver_setup.diff_support = val;
-			break;
-		case OPT_IRQM:
-			driver_setup.irqm = val;
-			break;
-		case OPT_PCI_FIX_UP:
-			driver_setup.pci_fix_up	= val;
-			break;
-		case OPT_BUS_CHECK:
-			driver_setup.bus_check = val;
-			break;
-		case OPT_OPTIMIZE:
-			driver_setup.optimize = val;
-			break;
-		case OPT_RECOVERY:
-			driver_setup.recovery = val;
-			break;
-		case OPT_USE_NVRAM:
-			driver_setup.use_nvram = val;
-			break;
-		case OPT_SAFE_SETUP:
-			memcpy(&driver_setup, &driver_safe_setup,
-				sizeof(driver_setup));
-			break;
-		case OPT_EXCLUDE:
-			if (xi < SCSI_NCR_MAX_EXCLUDES)
-				driver_setup.excludes[xi++] = val;
-			break;
-		case OPT_HOST_ID:
-			driver_setup.host_id = val;
-			break;
-#ifdef SCSI_NCR_IARB_SUPPORT
-		case OPT_IARB:
-			driver_setup.iarb = val;
-			break;
-#endif
-		default:
-			printk("sym53c8xx_setup: unexpected boot option '%.*s' ignored\n", (int)(pc-cur+1), cur);
-			break;
-		}
-
-		if ((cur = strchr(cur, ARG_SEP)) != NULL)
-			++cur;
-	}
-#endif /* SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT */
-	return 1;
-}
-
-/*===================================================================
-**
-**	Get device queue depth from boot command line.
-**
-**===================================================================
-*/
-#define DEF_DEPTH	(driver_setup.default_tags)
-#define ALL_TARGETS	-2
-#define NO_TARGET	-1
-#define ALL_LUNS	-2
-#define NO_LUN		-1
-
-static int device_queue_depth(int unit, int target, int lun)
-{
-	int c, h, t, u, v;
-	char *p = driver_setup.tag_ctrl;
-	char *ep;
-
-	h = -1;
-	t = NO_TARGET;
-	u = NO_LUN;
-	while ((c = *p++) != 0) {
-		v = simple_strtoul(p, &ep, 0);
-		switch(c) {
-		case '/':
-			++h;
-			t = ALL_TARGETS;
-			u = ALL_LUNS;
-			break;
-		case 't':
-			if (t != target)
-				t = (target == v) ? v : NO_TARGET;
-			u = ALL_LUNS;
-			break;
-		case 'u':
-			if (u != lun)
-				u = (lun == v) ? v : NO_LUN;
-			break;
-		case 'q':
-			if (h == unit &&
-				(t == ALL_TARGETS || t == target) &&
-				(u == ALL_LUNS    || u == lun))
-				return v;
-			break;
-		case '-':
-			t = ALL_TARGETS;
-			u = ALL_LUNS;
-			break;
-		default:
-			break;
-		}
-		p = ep;
-	}
-	return DEF_DEPTH;
-}
diff --git a/drivers/scsi/sym53c8xx_defs.h b/drivers/scsi/sym53c8xx_defs.h
deleted file mode 100644
index 139cd0e..0000000
--- a/drivers/scsi/sym53c8xx_defs.h
+++ /dev/null
@@ -1,1320 +0,0 @@
-/******************************************************************************
-**  High Performance device driver for the Symbios 53C896 controller.
-**
-**  Copyright (C) 1998-2001  Gerard Roudier <groudier@free.fr>
-**
-**  This driver also supports all the Symbios 53C8XX controller family, 
-**  except 53C810 revisions < 16, 53C825 revisions < 16 and all 
-**  revisions of 53C815 controllers.
-**
-**  This driver is based on the Linux port of the FreeBSD ncr driver.
-** 
-**  Copyright (C) 1994  Wolfgang Stanglmeier
-**  
-**-----------------------------------------------------------------------------
-**  
-**  This program is free software; you can redistribute it and/or modify
-**  it under the terms of the GNU General Public License as published by
-**  the Free Software Foundation; either version 2 of the License, or
-**  (at your option) any later version.
-**
-**  This program is distributed in the hope that it will be useful,
-**  but WITHOUT ANY WARRANTY; without even the implied warranty of
-**  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-**  GNU General Public License for more details.
-**
-**  You should have received a copy of the GNU General Public License
-**  along with this program; if not, write to the Free Software
-**  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-**
-**-----------------------------------------------------------------------------
-**
-**  The Linux port of the FreeBSD ncr driver has been achieved in 
-**  november 1995 by:
-**
-**          Gerard Roudier              <groudier@free.fr>
-**
-**  Being given that this driver originates from the FreeBSD version, and
-**  in order to keep synergy on both, any suggested enhancements and corrections
-**  received on Linux are automatically a potential candidate for the FreeBSD 
-**  version.
-**
-**  The original driver has been written for 386bsd and FreeBSD by
-**          Wolfgang Stanglmeier        <wolf@cologne.de>
-**          Stefan Esser                <se@mi.Uni-Koeln.de>
-**
-**-----------------------------------------------------------------------------
-**
-**  Major contributions:
-**  --------------------
-**
-**  NVRAM detection and reading.
-**    Copyright (C) 1997 Richard Waltham <dormouse@farsrobt.demon.co.uk>
-**
-**  Added support for MIPS big endian systems.
-**    Carsten Langgaard, carstenl@mips.com
-**    Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
-**
-**  Added support for HP PARISC big endian systems.
-**    Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
-**
-*******************************************************************************
-*/
-
-#ifndef SYM53C8XX_DEFS_H
-#define SYM53C8XX_DEFS_H
-
-#include <linux/config.h>
-
-/*
-**	If you want a driver as small as possible, donnot define the 
-**	following options.
-*/
-#define SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT
-#define SCSI_NCR_DEBUG_INFO_SUPPORT
-
-/*
-**	To disable integrity checking, do not define the 
-**	following option.
-*/
-#ifdef	CONFIG_SCSI_NCR53C8XX_INTEGRITY_CHECK
-#	define SCSI_NCR_ENABLE_INTEGRITY_CHECK
-#endif
-
-/* ---------------------------------------------------------------------
-** Take into account kernel configured parameters.
-** Most of these options can be overridden at startup by a command line.
-** ---------------------------------------------------------------------
-*/
-
-/*
- * For Ultra2 and Ultra3 SCSI support option, use special features. 
- *
- * Value (default) means:
- *	bit 0 : all features enabled, except:
- *		bit 1 : PCI Write And Invalidate.
- *		bit 2 : Data Phase Mismatch handling from SCRIPTS.
- *
- * Use boot options ncr53c8xx=specf:1 if you want all chip features to be 
- * enabled by the driver.
- */
-#define	SCSI_NCR_SETUP_SPECIAL_FEATURES		(3)
-
-#define SCSI_NCR_MAX_SYNC			(80)
-
-/*
- * Allow tags from 2 to 256, default 8
- */
-#ifdef	CONFIG_SCSI_NCR53C8XX_MAX_TAGS
-#if	CONFIG_SCSI_NCR53C8XX_MAX_TAGS < 2
-#define SCSI_NCR_MAX_TAGS	(2)
-#elif	CONFIG_SCSI_NCR53C8XX_MAX_TAGS > 256
-#define SCSI_NCR_MAX_TAGS	(256)
-#else
-#define	SCSI_NCR_MAX_TAGS	CONFIG_SCSI_NCR53C8XX_MAX_TAGS
-#endif
-#else
-#define SCSI_NCR_MAX_TAGS	(8)
-#endif
-
-/*
- * Allow tagged command queuing support if configured with default number 
- * of tags set to max (see above).
- */
-#ifdef	CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS
-#define	SCSI_NCR_SETUP_DEFAULT_TAGS	CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS
-#elif	defined CONFIG_SCSI_NCR53C8XX_TAGGED_QUEUE
-#define	SCSI_NCR_SETUP_DEFAULT_TAGS	SCSI_NCR_MAX_TAGS
-#else
-#define	SCSI_NCR_SETUP_DEFAULT_TAGS	(0)
-#endif
-
-/*
- * Immediate arbitration
- */
-#if defined(CONFIG_SCSI_NCR53C8XX_IARB)
-#define SCSI_NCR_IARB_SUPPORT
-#endif
-
-/*
- * Sync transfer frequency at startup.
- * Allow from 5Mhz to 80Mhz default 20 Mhz.
- */
-#ifndef	CONFIG_SCSI_NCR53C8XX_SYNC
-#define	CONFIG_SCSI_NCR53C8XX_SYNC	(20)
-#elif	CONFIG_SCSI_NCR53C8XX_SYNC > SCSI_NCR_MAX_SYNC
-#undef	CONFIG_SCSI_NCR53C8XX_SYNC
-#define	CONFIG_SCSI_NCR53C8XX_SYNC	SCSI_NCR_MAX_SYNC
-#endif
-
-#if	CONFIG_SCSI_NCR53C8XX_SYNC == 0
-#define	SCSI_NCR_SETUP_DEFAULT_SYNC	(255)
-#elif	CONFIG_SCSI_NCR53C8XX_SYNC <= 5
-#define	SCSI_NCR_SETUP_DEFAULT_SYNC	(50)
-#elif	CONFIG_SCSI_NCR53C8XX_SYNC <= 20
-#define	SCSI_NCR_SETUP_DEFAULT_SYNC	(250/(CONFIG_SCSI_NCR53C8XX_SYNC))
-#elif	CONFIG_SCSI_NCR53C8XX_SYNC <= 33
-#define	SCSI_NCR_SETUP_DEFAULT_SYNC	(11)
-#elif	CONFIG_SCSI_NCR53C8XX_SYNC <= 40
-#define	SCSI_NCR_SETUP_DEFAULT_SYNC	(10)
-#else
-#define	SCSI_NCR_SETUP_DEFAULT_SYNC 	(9)
-#endif
-
-/*
- * Disallow disconnections at boot-up
- */
-#ifdef CONFIG_SCSI_NCR53C8XX_NO_DISCONNECT
-#define SCSI_NCR_SETUP_DISCONNECTION	(0)
-#else
-#define SCSI_NCR_SETUP_DISCONNECTION	(1)
-#endif
-
-/*
- * Force synchronous negotiation for all targets
- */
-#ifdef CONFIG_SCSI_NCR53C8XX_FORCE_SYNC_NEGO
-#define SCSI_NCR_SETUP_FORCE_SYNC_NEGO	(1)
-#else
-#define SCSI_NCR_SETUP_FORCE_SYNC_NEGO	(0)
-#endif
-
-/*
- * Disable master parity checking (flawed hardwares need that)
- */
-#ifdef CONFIG_SCSI_NCR53C8XX_DISABLE_MPARITY_CHECK
-#define SCSI_NCR_SETUP_MASTER_PARITY	(0)
-#else
-#define SCSI_NCR_SETUP_MASTER_PARITY	(1)
-#endif
-
-/*
- * Disable scsi parity checking (flawed devices may need that)
- */
-#ifdef CONFIG_SCSI_NCR53C8XX_DISABLE_PARITY_CHECK
-#define SCSI_NCR_SETUP_SCSI_PARITY	(0)
-#else
-#define SCSI_NCR_SETUP_SCSI_PARITY	(1)
-#endif
-
-/*
- * Settle time after reset at boot-up
- */
-#define SCSI_NCR_SETUP_SETTLE_TIME	(2)
-
-/*
-**	Bridge quirks work-around option defaulted to 1.
-*/
-#ifndef	SCSI_NCR_PCIQ_WORK_AROUND_OPT
-#define	SCSI_NCR_PCIQ_WORK_AROUND_OPT	1
-#endif
-
-/*
-**	Work-around common bridge misbehaviour.
-**
-**	- Do not flush posted writes in the opposite 
-**	  direction on read.
-**	- May reorder DMA writes to memory.
-**
-**	This option should not affect performances 
-**	significantly, so it is the default.
-*/
-#if	SCSI_NCR_PCIQ_WORK_AROUND_OPT == 1
-#define	SCSI_NCR_PCIQ_MAY_NOT_FLUSH_PW_UPSTREAM
-#define	SCSI_NCR_PCIQ_MAY_REORDER_WRITES
-#define	SCSI_NCR_PCIQ_MAY_MISS_COMPLETIONS
-
-/*
-**	Same as option 1, but also deal with 
-**	misconfigured interrupts.
-**
-**	- Edge triggerred instead of level sensitive.
-**	- No interrupt line connected.
-**	- IRQ number misconfigured.
-**	
-**	If no interrupt is delivered, the driver will 
-**	catch the interrupt conditions 10 times per 
-**	second. No need to say that this option is 
-**	not recommended.
-*/
-#elif	SCSI_NCR_PCIQ_WORK_AROUND_OPT == 2
-#define	SCSI_NCR_PCIQ_MAY_NOT_FLUSH_PW_UPSTREAM
-#define	SCSI_NCR_PCIQ_MAY_REORDER_WRITES
-#define	SCSI_NCR_PCIQ_MAY_MISS_COMPLETIONS
-#define	SCSI_NCR_PCIQ_BROKEN_INTR
-
-/*
-**	Some bridge designers decided to flush 
-**	everything prior to deliver the interrupt.
-**	This option tries to deal with such a 
-**	behaviour.
-*/
-#elif	SCSI_NCR_PCIQ_WORK_AROUND_OPT == 3
-#define	SCSI_NCR_PCIQ_SYNC_ON_INTR
-#endif
-
-/*
-**	Other parameters not configurable with "make config"
-**	Avoid to change these constants, unless you know what you are doing.
-*/
-
-#define SCSI_NCR_ALWAYS_SIMPLE_TAG
-#define SCSI_NCR_MAX_SCATTER	(127)
-#define SCSI_NCR_MAX_TARGET	(16)
-
-/*
-**   Compute some desirable value for CAN_QUEUE 
-**   and CMD_PER_LUN.
-**   The driver will use lower values if these 
-**   ones appear to be too large.
-*/
-#define SCSI_NCR_CAN_QUEUE	(8*SCSI_NCR_MAX_TAGS + 2*SCSI_NCR_MAX_TARGET)
-#define SCSI_NCR_CMD_PER_LUN	(SCSI_NCR_MAX_TAGS)
-
-#define SCSI_NCR_SG_TABLESIZE	(SCSI_NCR_MAX_SCATTER)
-#define SCSI_NCR_TIMER_INTERVAL	(HZ)
-
-#if 1 /* defined CONFIG_SCSI_MULTI_LUN */
-#define SCSI_NCR_MAX_LUN	(16)
-#else
-#define SCSI_NCR_MAX_LUN	(1)
-#endif
-
-/*
- *  IO functions definition for big/little endian CPU support.
- *  For now, the NCR is only supported in little endian addressing mode, 
- */
-
-#ifdef	__BIG_ENDIAN
-
-#define	inw_l2b		inw
-#define	inl_l2b		inl
-#define	outw_b2l	outw
-#define	outl_b2l	outl
-
-#define	readb_raw	readb
-#define	writeb_raw	writeb
-
-#if defined(SCSI_NCR_BIG_ENDIAN)
-#define	readw_l2b	__raw_readw
-#define	readl_l2b	__raw_readl
-#define	writew_b2l	__raw_writew
-#define	writel_b2l	__raw_writel
-#define	readw_raw	__raw_readw
-#define	readl_raw	__raw_readl
-#define	writew_raw	__raw_writew
-#define	writel_raw	__raw_writel
-#else	/* Other big-endian */
-#define	readw_l2b	readw
-#define	readl_l2b	readl
-#define	writew_b2l	writew
-#define	writel_b2l	writel
-#define	readw_raw	readw
-#define	readl_raw	readl
-#define	writew_raw	writew
-#define	writel_raw	writel
-#endif
-
-#else	/* little endian */
-
-#define	inw_raw		inw
-#define	inl_raw		inl
-#define	outw_raw	outw
-#define	outl_raw	outl
-
-#define	readb_raw	readb
-#define	readw_raw	readw
-#define	readl_raw	readl
-#define	writeb_raw	writeb
-#define	writew_raw	writew
-#define	writel_raw	writel
-
-#endif
-
-#if !defined(__hppa__) && !defined(__mips__)
-#ifdef	SCSI_NCR_BIG_ENDIAN
-#error	"The NCR in BIG ENDIAN addressing mode is not (yet) supported"
-#endif
-#endif
-
-#define MEMORY_BARRIER()	mb()
-
-
-/*
- *  If the NCR uses big endian addressing mode over the 
- *  PCI, actual io register addresses for byte and word 
- *  accesses must be changed according to lane routing.
- *  Btw, ncr_offb() and ncr_offw() macros only apply to 
- *  constants and so donnot generate bloated code.
- */
-
-#if	defined(SCSI_NCR_BIG_ENDIAN)
-
-#define ncr_offb(o)	(((o)&~3)+((~((o)&3))&3))
-#define ncr_offw(o)	(((o)&~3)+((~((o)&3))&2))
-
-#else
-
-#define ncr_offb(o)	(o)
-#define ncr_offw(o)	(o)
-
-#endif
-
-/*
- *  If the CPU and the NCR use same endian-ness addressing,
- *  no byte reordering is needed for script patching.
- *  Macro cpu_to_scr() is to be used for script patching.
- *  Macro scr_to_cpu() is to be used for getting a DWORD 
- *  from the script.
- */
-
-#if	defined(__BIG_ENDIAN) && !defined(SCSI_NCR_BIG_ENDIAN)
-
-#define cpu_to_scr(dw)	cpu_to_le32(dw)
-#define scr_to_cpu(dw)	le32_to_cpu(dw)
-
-#elif	defined(__LITTLE_ENDIAN) && defined(SCSI_NCR_BIG_ENDIAN)
-
-#define cpu_to_scr(dw)	cpu_to_be32(dw)
-#define scr_to_cpu(dw)	be32_to_cpu(dw)
-
-#else
-
-#define cpu_to_scr(dw)	(dw)
-#define scr_to_cpu(dw)	(dw)
-
-#endif
-
-/*
- *  Access to the controller chip.
- *
- *  If the CPU and the NCR use same endian-ness addressing,
- *  no byte reordering is needed for accessing chip io 
- *  registers. Functions suffixed by '_raw' are assumed 
- *  to access the chip over the PCI without doing byte 
- *  reordering. Functions suffixed by '_l2b' are 
- *  assumed to perform little-endian to big-endian byte 
- *  reordering, those suffixed by '_b2l' blah, blah,
- *  blah, ...
- */
-
-/*
- *  MEMORY mapped IO input / output
- */
-
-#define INB_OFF(o)		readb_raw((char __iomem *)np->reg + ncr_offb(o))
-#define OUTB_OFF(o, val)	writeb_raw((val), (char __iomem *)np->reg + ncr_offb(o))
-
-#if	defined(__BIG_ENDIAN) && !defined(SCSI_NCR_BIG_ENDIAN)
-
-#define INW_OFF(o)		readw_l2b((char __iomem *)np->reg + ncr_offw(o))
-#define INL_OFF(o)		readl_l2b((char __iomem *)np->reg + (o))
-
-#define OUTW_OFF(o, val)	writew_b2l((val), (char __iomem *)np->reg + ncr_offw(o))
-#define OUTL_OFF(o, val)	writel_b2l((val), (char __iomem *)np->reg + (o))
-
-#elif	defined(__LITTLE_ENDIAN) && defined(SCSI_NCR_BIG_ENDIAN)
-
-#define INW_OFF(o)		readw_b2l((char __iomem *)np->reg + ncr_offw(o))
-#define INL_OFF(o)		readl_b2l((char __iomem *)np->reg + (o))
-
-#define OUTW_OFF(o, val)	writew_l2b((val), (char __iomem *)np->reg + ncr_offw(o))
-#define OUTL_OFF(o, val)	writel_l2b((val), (char __iomem *)np->reg + (o))
-
-#else
-
-#ifdef CONFIG_SCSI_NCR53C8XX_NO_WORD_TRANSFERS
-/* Only 8 or 32 bit transfers allowed */
-#define INW_OFF(o)		(readb((char __iomem *)np->reg + ncr_offw(o)) << 8 | readb((char __iomem *)np->reg + ncr_offw(o) + 1))
-#else
-#define INW_OFF(o)		readw_raw((char __iomem *)np->reg + ncr_offw(o))
-#endif
-#define INL_OFF(o)		readl_raw((char __iomem *)np->reg + (o))
-
-#ifdef CONFIG_SCSI_NCR53C8XX_NO_WORD_TRANSFERS
-/* Only 8 or 32 bit transfers allowed */
-#define OUTW_OFF(o, val)	do { writeb((char)((val) >> 8), (char __iomem *)np->reg + ncr_offw(o)); writeb((char)(val), (char __iomem *)np->reg + ncr_offw(o) + 1); } while (0)
-#else
-#define OUTW_OFF(o, val)	writew_raw((val), (char __iomem *)np->reg + ncr_offw(o))
-#endif
-#define OUTL_OFF(o, val)	writel_raw((val), (char __iomem *)np->reg + (o))
-
-#endif
-
-#define INB(r)		INB_OFF (offsetof(struct ncr_reg,r))
-#define INW(r)		INW_OFF (offsetof(struct ncr_reg,r))
-#define INL(r)		INL_OFF (offsetof(struct ncr_reg,r))
-
-#define OUTB(r, val)	OUTB_OFF (offsetof(struct ncr_reg,r), (val))
-#define OUTW(r, val)	OUTW_OFF (offsetof(struct ncr_reg,r), (val))
-#define OUTL(r, val)	OUTL_OFF (offsetof(struct ncr_reg,r), (val))
-
-/*
- *  Set bit field ON, OFF 
- */
-
-#define OUTONB(r, m)	OUTB(r, INB(r) | (m))
-#define OUTOFFB(r, m)	OUTB(r, INB(r) & ~(m))
-#define OUTONW(r, m)	OUTW(r, INW(r) | (m))
-#define OUTOFFW(r, m)	OUTW(r, INW(r) & ~(m))
-#define OUTONL(r, m)	OUTL(r, INL(r) | (m))
-#define OUTOFFL(r, m)	OUTL(r, INL(r) & ~(m))
-
-/*
- *  We normally want the chip to have a consistent view
- *  of driver internal data structures when we restart it.
- *  Thus these macros.
- */
-#define OUTL_DSP(v)				\
-	do {					\
-		MEMORY_BARRIER();		\
-		OUTL (nc_dsp, (v));		\
-	} while (0)
-
-#define OUTONB_STD()				\
-	do {					\
-		MEMORY_BARRIER();		\
-		OUTONB (nc_dcntl, (STD|NOCOM));	\
-	} while (0)
-
-
-/*
-**   NCR53C8XX devices features table.
-*/
-struct ncr_chip {
-	unsigned short	revision_id;
-	unsigned char	burst_max;	/* log-base-2 of max burst */
-	unsigned char	offset_max;
-	unsigned char	nr_divisor;
-	unsigned int	features;
-#define FE_LED0		(1<<0)
-#define FE_WIDE		(1<<1)    /* Wide data transfers */
-#define FE_ULTRA	(1<<2)	  /* Ultra speed 20Mtrans/sec */
-#define FE_DBLR		(1<<4)	  /* Clock doubler present */
-#define FE_QUAD		(1<<5)	  /* Clock quadrupler present */
-#define FE_ERL		(1<<6)    /* Enable read line */
-#define FE_CLSE		(1<<7)    /* Cache line size enable */
-#define FE_WRIE		(1<<8)    /* Write & Invalidate enable */
-#define FE_ERMP		(1<<9)    /* Enable read multiple */
-#define FE_BOF		(1<<10)   /* Burst opcode fetch */
-#define FE_DFS		(1<<11)   /* DMA fifo size */
-#define FE_PFEN		(1<<12)   /* Prefetch enable */
-#define FE_LDSTR	(1<<13)   /* Load/Store supported */
-#define FE_RAM		(1<<14)   /* On chip RAM present */
-#define FE_VARCLK	(1<<15)   /* SCSI clock may vary */
-#define FE_RAM8K	(1<<16)   /* On chip RAM sized 8Kb */
-#define FE_64BIT	(1<<17)   /* Have a 64-bit PCI interface */
-#define FE_IO256	(1<<18)   /* Requires full 256 bytes in PCI space */
-#define FE_NOPM		(1<<19)   /* Scripts handles phase mismatch */
-#define FE_LEDC		(1<<20)   /* Hardware control of LED */
-#define FE_DIFF		(1<<21)   /* Support Differential SCSI */
-#define FE_66MHZ 	(1<<23)   /* 66MHz PCI Support */
-#define FE_DAC	 	(1<<24)   /* Support DAC cycles (64 bit addressing) */
-#define FE_ISTAT1 	(1<<25)   /* Have ISTAT1, MBOX0, MBOX1 registers */
-#define FE_DAC_IN_USE	(1<<26)	  /* Platform does DAC cycles */
-#define FE_EHP		(1<<27)   /* 720: Even host parity */
-#define FE_MUX		(1<<28)   /* 720: Multiplexed bus */
-#define FE_EA		(1<<29)   /* 720: Enable Ack */
-
-#define FE_CACHE_SET	(FE_ERL|FE_CLSE|FE_WRIE|FE_ERMP)
-#define FE_SCSI_SET	(FE_WIDE|FE_ULTRA|FE_DBLR|FE_QUAD|F_CLK80)
-#define FE_SPECIAL_SET	(FE_CACHE_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN|FE_RAM)
-};
-
-
-/*
-**	Driver setup structure.
-**
-**	This structure is initialized from linux config options.
-**	It can be overridden at boot-up by the boot command line.
-*/
-#define SCSI_NCR_MAX_EXCLUDES 8
-struct ncr_driver_setup {
-	u8	master_parity;
-	u8	scsi_parity;
-	u8	disconnection;
-	u8	special_features;
-	u8	force_sync_nego;
-	u8	reverse_probe;
-	u8	pci_fix_up;
-	u8	use_nvram;
-	u8	verbose;
-	u8	default_tags;
-	u16	default_sync;
-	u16	debug;
-	u8	burst_max;
-	u8	led_pin;
-	u8	max_wide;
-	u8	settle_delay;
-	u8	diff_support;
-	u8	irqm;
-	u8	bus_check;
-	u8	optimize;
-	u8	recovery;
-	u8	host_id;
-	u16	iarb;
-	u32	excludes[SCSI_NCR_MAX_EXCLUDES];
-	char	tag_ctrl[100];
-};
-
-/*
-**	Initial setup.
-**	Can be overriden at startup by a command line.
-*/
-#define SCSI_NCR_DRIVER_SETUP			\
-{						\
-	SCSI_NCR_SETUP_MASTER_PARITY,		\
-	SCSI_NCR_SETUP_SCSI_PARITY,		\
-	SCSI_NCR_SETUP_DISCONNECTION,		\
-	SCSI_NCR_SETUP_SPECIAL_FEATURES,	\
-	SCSI_NCR_SETUP_FORCE_SYNC_NEGO,		\
-	0,					\
-	0,					\
-	1,					\
-	0,					\
-	SCSI_NCR_SETUP_DEFAULT_TAGS,		\
-	SCSI_NCR_SETUP_DEFAULT_SYNC,		\
-	0x00,					\
-	7,					\
-	0,					\
-	1,					\
-	SCSI_NCR_SETUP_SETTLE_TIME,		\
-	0,					\
-	0,					\
-	1,					\
-	0,					\
-	0,					\
-	255,					\
-	0x00					\
-}
-
-/*
-**	Boot fail safe setup.
-**	Override initial setup from boot command line:
-**	ncr53c8xx=safe:y
-*/
-#define SCSI_NCR_DRIVER_SAFE_SETUP		\
-{						\
-	0,					\
-	1,					\
-	0,					\
-	0,					\
-	0,					\
-	0,					\
-	0,					\
-	1,					\
-	2,					\
-	0,					\
-	255,					\
-	0x00,					\
-	255,					\
-	0,					\
-	0,					\
-	10,					\
-	1,					\
-	1,					\
-	1,					\
-	0,					\
-	0,					\
-	255					\
-}
-
-/**************** ORIGINAL CONTENT of ncrreg.h from FreeBSD ******************/
-
-/*-----------------------------------------------------------------
-**
-**	The ncr 53c810 register structure.
-**
-**-----------------------------------------------------------------
-*/
-
-struct ncr_reg {
-/*00*/  u8	nc_scntl0;    /* full arb., ena parity, par->ATN  */
-
-/*01*/  u8	nc_scntl1;    /* no reset                         */
-        #define   ISCON   0x10  /* connected to scsi		    */
-        #define   CRST    0x08  /* force reset                      */
-        #define   IARB    0x02  /* immediate arbitration            */
-
-/*02*/  u8	nc_scntl2;    /* no disconnect expected           */
-	#define   SDU     0x80  /* cmd: disconnect will raise error */
-	#define   CHM     0x40  /* sta: chained mode                */
-	#define   WSS     0x08  /* sta: wide scsi send           [W]*/
-	#define   WSR     0x01  /* sta: wide scsi received       [W]*/
-
-/*03*/  u8	nc_scntl3;    /* cnf system clock dependent       */
-	#define   EWS     0x08  /* cmd: enable wide scsi         [W]*/
-	#define   ULTRA   0x80  /* cmd: ULTRA enable                */
-				/* bits 0-2, 7 rsvd for C1010       */
-
-/*04*/  u8	nc_scid;	/* cnf host adapter scsi address    */
-	#define   RRE     0x40  /* r/w:e enable response to resel.  */
-	#define   SRE     0x20  /* r/w:e enable response to select  */
-
-/*05*/  u8	nc_sxfer;	/* ### Sync speed and count         */
-				/* bits 6-7 rsvd for C1010          */
-
-/*06*/  u8	nc_sdid;	/* ### Destination-ID               */
-
-/*07*/  u8	nc_gpreg;	/* ??? IO-Pins                      */
-
-/*08*/  u8	nc_sfbr;	/* ### First byte in phase          */
-
-/*09*/  u8	nc_socl;
-	#define   CREQ	  0x80	/* r/w: SCSI-REQ                    */
-	#define   CACK	  0x40	/* r/w: SCSI-ACK                    */
-	#define   CBSY	  0x20	/* r/w: SCSI-BSY                    */
-	#define   CSEL	  0x10	/* r/w: SCSI-SEL                    */
-	#define   CATN	  0x08	/* r/w: SCSI-ATN                    */
-	#define   CMSG	  0x04	/* r/w: SCSI-MSG                    */
-	#define   CC_D	  0x02	/* r/w: SCSI-C_D                    */
-	#define   CI_O	  0x01	/* r/w: SCSI-I_O                    */
-
-/*0a*/  u8	nc_ssid;
-
-/*0b*/  u8	nc_sbcl;
-
-/*0c*/  u8	nc_dstat;
-        #define   DFE     0x80  /* sta: dma fifo empty              */
-        #define   MDPE    0x40  /* int: master data parity error    */
-        #define   BF      0x20  /* int: script: bus fault           */
-        #define   ABRT    0x10  /* int: script: command aborted     */
-        #define   SSI     0x08  /* int: script: single step         */
-        #define   SIR     0x04  /* int: script: interrupt instruct. */
-        #define   IID     0x01  /* int: script: illegal instruct.   */
-
-/*0d*/  u8	nc_sstat0;
-        #define   ILF     0x80  /* sta: data in SIDL register lsb   */
-        #define   ORF     0x40  /* sta: data in SODR register lsb   */
-        #define   OLF     0x20  /* sta: data in SODL register lsb   */
-        #define   AIP     0x10  /* sta: arbitration in progress     */
-        #define   LOA     0x08  /* sta: arbitration lost            */
-        #define   WOA     0x04  /* sta: arbitration won             */
-        #define   IRST    0x02  /* sta: scsi reset signal           */
-        #define   SDP     0x01  /* sta: scsi parity signal          */
-
-/*0e*/  u8	nc_sstat1;
-	#define   FF3210  0xf0	/* sta: bytes in the scsi fifo      */
-
-/*0f*/  u8	nc_sstat2;
-        #define   ILF1    0x80  /* sta: data in SIDL register msb[W]*/
-        #define   ORF1    0x40  /* sta: data in SODR register msb[W]*/
-        #define   OLF1    0x20  /* sta: data in SODL register msb[W]*/
-        #define   DM      0x04  /* sta: DIFFSENS mismatch (895/6 only) */
-        #define   LDSC    0x02  /* sta: disconnect & reconnect      */
-
-/*10*/  u8	nc_dsa;	/* --> Base page                    */
-/*11*/  u8	nc_dsa1;
-/*12*/  u8	nc_dsa2;
-/*13*/  u8	nc_dsa3;
-
-/*14*/  u8	nc_istat;	/* --> Main Command and status      */
-        #define   CABRT   0x80  /* cmd: abort current operation     */
-        #define   SRST    0x40  /* mod: reset chip                  */
-        #define   SIGP    0x20  /* r/w: message from host to ncr    */
-        #define   SEM     0x10  /* r/w: message between host + ncr  */
-        #define   CON     0x08  /* sta: connected to scsi           */
-        #define   INTF    0x04  /* sta: int on the fly (reset by wr)*/
-        #define   SIP     0x02  /* sta: scsi-interrupt              */
-        #define   DIP     0x01  /* sta: host/script interrupt       */
-
-/*15*/  u8	nc_istat1;	/* 896 and later cores only */
-        #define   FLSH    0x04  /* sta: chip is flushing            */
-        #define   SRUN    0x02  /* sta: scripts are running         */
-        #define   SIRQD   0x01  /* r/w: disable INT pin             */
-
-/*16*/  u8	nc_mbox0;	/* 896 and later cores only */
-/*17*/  u8	nc_mbox1;	/* 896 and later cores only */
-
-/*18*/	u8	nc_ctest0;
-	#define   EHP     0x04	/* 720 even host parity             */
-/*19*/  u8	nc_ctest1;
-
-/*1a*/  u8	nc_ctest2;
-	#define   CSIGP   0x40
-				/* bits 0-2,7 rsvd for C1010        */
-
-/*1b*/  u8	nc_ctest3;
-	#define   FLF     0x08  /* cmd: flush dma fifo              */
-	#define   CLF	  0x04	/* cmd: clear dma fifo		    */
-	#define   FM      0x02  /* mod: fetch pin mode              */
-	#define   WRIE    0x01  /* mod: write and invalidate enable */
-				/* bits 4-7 rsvd for C1010          */
-
-/*1c*/  u32    nc_temp;	/* ### Temporary stack              */
-
-/*20*/	u8	nc_dfifo;
-/*21*/  u8	nc_ctest4;
-	#define   MUX     0x80  /* 720 host bus multiplex mode      */
-	#define   BDIS    0x80  /* mod: burst disable               */
-	#define   MPEE    0x08  /* mod: master parity error enable  */
-
-/*22*/  u8	nc_ctest5;
-	#define   DFS     0x20  /* mod: dma fifo size               */
-				/* bits 0-1, 3-7 rsvd for C1010          */
-/*23*/  u8	nc_ctest6;
-
-/*24*/  u32    nc_dbc;	/* ### Byte count and command       */
-/*28*/  u32    nc_dnad;	/* ### Next command register        */
-/*2c*/  u32    nc_dsp;	/* --> Script Pointer               */
-/*30*/  u32    nc_dsps;	/* --> Script pointer save/opcode#2 */
-
-/*34*/  u8	nc_scratcha;  /* Temporary register a            */
-/*35*/  u8	nc_scratcha1;
-/*36*/  u8	nc_scratcha2;
-/*37*/  u8	nc_scratcha3;
-
-/*38*/  u8	nc_dmode;
-	#define   BL_2    0x80  /* mod: burst length shift value +2 */
-	#define   BL_1    0x40  /* mod: burst length shift value +1 */
-	#define   ERL     0x08  /* mod: enable read line            */
-	#define   ERMP    0x04  /* mod: enable read multiple        */
-	#define   BOF     0x02  /* mod: burst op code fetch         */
-
-/*39*/  u8	nc_dien;
-/*3a*/  u8	nc_sbr;
-
-/*3b*/  u8	nc_dcntl;	/* --> Script execution control     */
-	#define   CLSE    0x80  /* mod: cache line size enable      */
-	#define   PFF     0x40  /* cmd: pre-fetch flush             */
-	#define   PFEN    0x20  /* mod: pre-fetch enable            */
-	#define   EA      0x20  /* mod: 720 enable-ack              */
-	#define   SSM     0x10  /* mod: single step mode            */
-	#define   IRQM    0x08  /* mod: irq mode (1 = totem pole !) */
-	#define   STD     0x04  /* cmd: start dma mode              */
-	#define   IRQD    0x02  /* mod: irq disable                 */
- 	#define	  NOCOM   0x01	/* cmd: protect sfbr while reselect */
-				/* bits 0-1 rsvd for C1010          */
-
-/*3c*/  u32	nc_adder;
-
-/*40*/  u16	nc_sien;	/* -->: interrupt enable            */
-/*42*/  u16	nc_sist;	/* <--: interrupt status            */
-        #define   SBMC    0x1000/* sta: SCSI Bus Mode Change (895/6 only) */
-        #define   STO     0x0400/* sta: timeout (select)            */
-        #define   GEN     0x0200/* sta: timeout (general)           */
-        #define   HTH     0x0100/* sta: timeout (handshake)         */
-        #define   MA      0x80  /* sta: phase mismatch              */
-        #define   CMP     0x40  /* sta: arbitration complete        */
-        #define   SEL     0x20  /* sta: selected by another device  */
-        #define   RSL     0x10  /* sta: reselected by another device*/
-        #define   SGE     0x08  /* sta: gross error (over/underflow)*/
-        #define   UDC     0x04  /* sta: unexpected disconnect       */
-        #define   RST     0x02  /* sta: scsi bus reset detected     */
-        #define   PAR     0x01  /* sta: scsi parity error           */
-
-/*44*/  u8	nc_slpar;
-/*45*/  u8	nc_swide;
-/*46*/  u8	nc_macntl;
-/*47*/  u8	nc_gpcntl;
-/*48*/  u8	nc_stime0;    /* cmd: timeout for select&handshake*/
-/*49*/  u8	nc_stime1;    /* cmd: timeout user defined        */
-/*4a*/  u16   nc_respid;    /* sta: Reselect-IDs                */
-
-/*4c*/  u8	nc_stest0;
-
-/*4d*/  u8	nc_stest1;
-	#define   SCLK    0x80	/* Use the PCI clock as SCSI clock	*/
-	#define   DBLEN   0x08	/* clock doubler running		*/
-	#define   DBLSEL  0x04	/* clock doubler selected		*/
-  
-
-/*4e*/  u8	nc_stest2;
-	#define   ROF     0x40	/* reset scsi offset (after gross error!) */
-	#define   DIF     0x20  /* 720 SCSI differential mode             */
-	#define   EXT     0x02  /* extended filtering                     */
-
-/*4f*/  u8	nc_stest3;
-	#define   TE     0x80	/* c: tolerAnt enable */
-	#define   HSC    0x20	/* c: Halt SCSI Clock */
-	#define   CSF    0x02	/* c: clear scsi fifo */
-
-/*50*/  u16   nc_sidl;	/* Lowlevel: latched from scsi data */
-/*52*/  u8	nc_stest4;
-	#define   SMODE  0xc0	/* SCSI bus mode      (895/6 only) */
-	#define    SMODE_HVD 0x40	/* High Voltage Differential       */
-	#define    SMODE_SE  0x80	/* Single Ended                    */
-	#define    SMODE_LVD 0xc0	/* Low Voltage Differential        */
-	#define   LCKFRQ 0x20	/* Frequency Lock (895/6 only)     */
-				/* bits 0-5 rsvd for C1010          */
-
-/*53*/  u8	nc_53_;
-/*54*/  u16	nc_sodl;	/* Lowlevel: data out to scsi data  */
-/*56*/	u8	nc_ccntl0;	/* Chip Control 0 (896)             */
-	#define   ENPMJ  0x80	/* Enable Phase Mismatch Jump       */
-	#define   PMJCTL 0x40	/* Phase Mismatch Jump Control      */
-	#define   ENNDJ  0x20	/* Enable Non Data PM Jump          */
-	#define   DISFC  0x10	/* Disable Auto FIFO Clear          */
-	#define   DILS   0x02	/* Disable Internal Load/Store      */
-	#define   DPR    0x01	/* Disable Pipe Req                 */
-
-/*57*/	u8	nc_ccntl1;	/* Chip Control 1 (896)             */
-	#define   ZMOD   0x80	/* High Impedance Mode              */
-	#define	  DIC	 0x10	/* Disable Internal Cycles	    */
-	#define   DDAC   0x08	/* Disable Dual Address Cycle       */
-	#define   XTIMOD 0x04	/* 64-bit Table Ind. Indexing Mode  */
-	#define   EXTIBMV 0x02	/* Enable 64-bit Table Ind. BMOV    */
-	#define   EXDBMV 0x01	/* Enable 64-bit Direct BMOV        */
-
-/*58*/  u16	nc_sbdl;	/* Lowlevel: data from scsi data    */
-/*5a*/  u16	nc_5a_;
-
-/*5c*/  u8	nc_scr0;	/* Working register B               */
-/*5d*/  u8	nc_scr1;	/*                                  */
-/*5e*/  u8	nc_scr2;	/*                                  */
-/*5f*/  u8	nc_scr3;	/*                                  */
-
-/*60*/  u8	nc_scrx[64];	/* Working register C-R             */
-/*a0*/	u32	nc_mmrs;	/* Memory Move Read Selector        */
-/*a4*/	u32	nc_mmws;	/* Memory Move Write Selector       */
-/*a8*/	u32	nc_sfs;		/* Script Fetch Selector            */
-/*ac*/	u32	nc_drs;		/* DSA Relative Selector            */
-/*b0*/	u32	nc_sbms;	/* Static Block Move Selector       */
-/*b4*/	u32	nc_dbms;	/* Dynamic Block Move Selector      */
-/*b8*/	u32	nc_dnad64;	/* DMA Next Address 64              */
-/*bc*/	u16	nc_scntl4;	/* C1010 only                       */
-	#define   U3EN   0x80	/* Enable Ultra 3                   */
-	#define   AIPEN	 0x40   /* Allow check upper byte lanes     */
-	#define   XCLKH_DT 0x08 /* Extra clock of data hold on DT
-					transfer edge	            */
-	#define   XCLKH_ST 0x04 /* Extra clock of data hold on ST
-					transfer edge	            */
-
-/*be*/  u8	nc_aipcntl0;	/* Epat Control 1 C1010 only        */
-/*bf*/  u8	nc_aipcntl1;	/* AIP Control C1010_66 Only        */
-
-/*c0*/	u32	nc_pmjad1;	/* Phase Mismatch Jump Address 1    */
-/*c4*/	u32	nc_pmjad2;	/* Phase Mismatch Jump Address 2    */
-/*c8*/	u8	nc_rbc;		/* Remaining Byte Count             */
-/*c9*/	u8	nc_rbc1;	/*                                  */
-/*ca*/	u8	nc_rbc2;	/*                                  */
-/*cb*/	u8	nc_rbc3;	/*                                  */
-
-/*cc*/	u8	nc_ua;		/* Updated Address                  */
-/*cd*/	u8	nc_ua1;		/*                                  */
-/*ce*/	u8	nc_ua2;		/*                                  */
-/*cf*/	u8	nc_ua3;		/*                                  */
-/*d0*/	u32	nc_esa;		/* Entry Storage Address            */
-/*d4*/	u8	nc_ia;		/* Instruction Address              */
-/*d5*/	u8	nc_ia1;
-/*d6*/	u8	nc_ia2;
-/*d7*/	u8	nc_ia3;
-/*d8*/	u32	nc_sbc;		/* SCSI Byte Count (3 bytes only)   */
-/*dc*/	u32	nc_csbc;	/* Cumulative SCSI Byte Count       */
-
-				/* Following for C1010 only         */
-/*e0*/  u16	nc_crcpad;	/* CRC Value                        */
-/*e2*/  u8	nc_crccntl0;	/* CRC control register             */
-	#define   SNDCRC  0x10	/* Send CRC Request                 */
-/*e3*/  u8	nc_crccntl1;	/* CRC control register             */
-/*e4*/  u32	nc_crcdata;	/* CRC data register                */ 
-/*e8*/  u32	nc_e8_;		/* rsvd 			    */
-/*ec*/  u32	nc_ec_;		/* rsvd 			    */
-/*f0*/  u16	nc_dfbc;	/* DMA FIFO byte count              */ 
-
-};
-
-/*-----------------------------------------------------------
-**
-**	Utility macros for the script.
-**
-**-----------------------------------------------------------
-*/
-
-#define REGJ(p,r) (offsetof(struct ncr_reg, p ## r))
-#define REG(r) REGJ (nc_, r)
-
-typedef u32 ncrcmd;
-
-/*-----------------------------------------------------------
-**
-**	SCSI phases
-**
-**	DT phases illegal for ncr driver.
-**
-**-----------------------------------------------------------
-*/
-
-#define	SCR_DATA_OUT	0x00000000
-#define	SCR_DATA_IN	0x01000000
-#define	SCR_COMMAND	0x02000000
-#define	SCR_STATUS	0x03000000
-#define SCR_DT_DATA_OUT	0x04000000
-#define SCR_DT_DATA_IN	0x05000000
-#define SCR_MSG_OUT	0x06000000
-#define SCR_MSG_IN      0x07000000
-
-#define SCR_ILG_OUT	0x04000000
-#define SCR_ILG_IN	0x05000000
-
-/*-----------------------------------------------------------
-**
-**	Data transfer via SCSI.
-**
-**-----------------------------------------------------------
-**
-**	MOVE_ABS (LEN)
-**	<<start address>>
-**
-**	MOVE_IND (LEN)
-**	<<dnad_offset>>
-**
-**	MOVE_TBL
-**	<<dnad_offset>>
-**
-**-----------------------------------------------------------
-*/
-
-#define OPC_MOVE          0x08000000
-
-#define SCR_MOVE_ABS(l) ((0x00000000 | OPC_MOVE) | (l))
-#define SCR_MOVE_IND(l) ((0x20000000 | OPC_MOVE) | (l))
-#define SCR_MOVE_TBL     (0x10000000 | OPC_MOVE)
-
-#define SCR_CHMOV_ABS(l) ((0x00000000) | (l))
-#define SCR_CHMOV_IND(l) ((0x20000000) | (l))
-#define SCR_CHMOV_TBL     (0x10000000)
-
-struct scr_tblmove {
-        u32  size;
-        u32  addr;
-};
-
-/*-----------------------------------------------------------
-**
-**	Selection
-**
-**-----------------------------------------------------------
-**
-**	SEL_ABS | SCR_ID (0..15)    [ | REL_JMP]
-**	<<alternate_address>>
-**
-**	SEL_TBL | << dnad_offset>>  [ | REL_JMP]
-**	<<alternate_address>>
-**
-**-----------------------------------------------------------
-*/
-
-#define	SCR_SEL_ABS	0x40000000
-#define	SCR_SEL_ABS_ATN	0x41000000
-#define	SCR_SEL_TBL	0x42000000
-#define	SCR_SEL_TBL_ATN	0x43000000
-
-
-#ifdef SCSI_NCR_BIG_ENDIAN
-struct scr_tblsel {
-        u8	sel_scntl3;
-        u8	sel_id;
-        u8	sel_sxfer;
-        u8	sel_scntl4;	
-};
-#else
-struct scr_tblsel {
-        u8	sel_scntl4;	
-        u8	sel_sxfer;
-        u8	sel_id;
-        u8	sel_scntl3;
-};
-#endif
-
-#define SCR_JMP_REL     0x04000000
-#define SCR_ID(id)	(((u32)(id)) << 16)
-
-/*-----------------------------------------------------------
-**
-**	Waiting for Disconnect or Reselect
-**
-**-----------------------------------------------------------
-**
-**	WAIT_DISC
-**	dummy: <<alternate_address>>
-**
-**	WAIT_RESEL
-**	<<alternate_address>>
-**
-**-----------------------------------------------------------
-*/
-
-#define	SCR_WAIT_DISC	0x48000000
-#define SCR_WAIT_RESEL  0x50000000
-
-/*-----------------------------------------------------------
-**
-**	Bit Set / Reset
-**
-**-----------------------------------------------------------
-**
-**	SET (flags {|.. })
-**
-**	CLR (flags {|.. })
-**
-**-----------------------------------------------------------
-*/
-
-#define SCR_SET(f)     (0x58000000 | (f))
-#define SCR_CLR(f)     (0x60000000 | (f))
-
-#define	SCR_CARRY	0x00000400
-#define	SCR_TRG		0x00000200
-#define	SCR_ACK		0x00000040
-#define	SCR_ATN		0x00000008
-
-
-
-
-/*-----------------------------------------------------------
-**
-**	Memory to memory move
-**
-**-----------------------------------------------------------
-**
-**	COPY (bytecount)
-**	<< source_address >>
-**	<< destination_address >>
-**
-**	SCR_COPY   sets the NO FLUSH option by default.
-**	SCR_COPY_F does not set this option.
-**
-**	For chips which do not support this option,
-**	ncr_copy_and_bind() will remove this bit.
-**-----------------------------------------------------------
-*/
-
-#define SCR_NO_FLUSH 0x01000000
-
-#define SCR_COPY(n) (0xc0000000 | SCR_NO_FLUSH | (n))
-#define SCR_COPY_F(n) (0xc0000000 | (n))
-
-/*-----------------------------------------------------------
-**
-**	Register move and binary operations
-**
-**-----------------------------------------------------------
-**
-**	SFBR_REG (reg, op, data)        reg  = SFBR op data
-**	<< 0 >>
-**
-**	REG_SFBR (reg, op, data)        SFBR = reg op data
-**	<< 0 >>
-**
-**	REG_REG  (reg, op, data)        reg  = reg op data
-**	<< 0 >>
-**
-**-----------------------------------------------------------
-**	On 810A, 860, 825A, 875, 895 and 896 chips the content 
-**	of SFBR register can be used as data (SCR_SFBR_DATA).
-**	The 896 has additionnal IO registers starting at 
-**	offset 0x80. Bit 7 of register offset is stored in 
-**	bit 7 of the SCRIPTS instruction first DWORD.
-**-----------------------------------------------------------
-*/
-
-#define SCR_REG_OFS(ofs) ((((ofs) & 0x7f) << 16ul) + ((ofs) & 0x80)) 
-
-#define SCR_SFBR_REG(reg,op,data) \
-        (0x68000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul))
-
-#define SCR_REG_SFBR(reg,op,data) \
-        (0x70000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul))
-
-#define SCR_REG_REG(reg,op,data) \
-        (0x78000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul))
-
-
-#define      SCR_LOAD   0x00000000
-#define      SCR_SHL    0x01000000
-#define      SCR_OR     0x02000000
-#define      SCR_XOR    0x03000000
-#define      SCR_AND    0x04000000
-#define      SCR_SHR    0x05000000
-#define      SCR_ADD    0x06000000
-#define      SCR_ADDC   0x07000000
-
-#define      SCR_SFBR_DATA   (0x00800000>>8ul)	/* Use SFBR as data */
-
-/*-----------------------------------------------------------
-**
-**	FROM_REG (reg)		  SFBR = reg
-**	<< 0 >>
-**
-**	TO_REG	 (reg)		  reg  = SFBR
-**	<< 0 >>
-**
-**	LOAD_REG (reg, data)	  reg  = <data>
-**	<< 0 >>
-**
-**	LOAD_SFBR(data) 	  SFBR = <data>
-**	<< 0 >>
-**
-**-----------------------------------------------------------
-*/
-
-#define	SCR_FROM_REG(reg) \
-	SCR_REG_SFBR(reg,SCR_OR,0)
-
-#define	SCR_TO_REG(reg) \
-	SCR_SFBR_REG(reg,SCR_OR,0)
-
-#define	SCR_LOAD_REG(reg,data) \
-	SCR_REG_REG(reg,SCR_LOAD,data)
-
-#define SCR_LOAD_SFBR(data) \
-        (SCR_REG_SFBR (gpreg, SCR_LOAD, data))
-
-/*-----------------------------------------------------------
-**
-**	LOAD  from memory   to register.
-**	STORE from register to memory.
-**
-**	Only supported by 810A, 860, 825A, 875, 895 and 896.
-**
-**-----------------------------------------------------------
-**
-**	LOAD_ABS (LEN)
-**	<<start address>>
-**
-**	LOAD_REL (LEN)        (DSA relative)
-**	<<dsa_offset>>
-**
-**-----------------------------------------------------------
-*/
-
-#define SCR_REG_OFS2(ofs) (((ofs) & 0xff) << 16ul)
-#define SCR_NO_FLUSH2	0x02000000
-#define SCR_DSA_REL2	0x10000000
-
-#define SCR_LOAD_R(reg, how, n) \
-        (0xe1000000 | how | (SCR_REG_OFS2(REG(reg))) | (n))
-
-#define SCR_STORE_R(reg, how, n) \
-        (0xe0000000 | how | (SCR_REG_OFS2(REG(reg))) | (n))
-
-#define SCR_LOAD_ABS(reg, n)	SCR_LOAD_R(reg, SCR_NO_FLUSH2, n)
-#define SCR_LOAD_REL(reg, n)	SCR_LOAD_R(reg, SCR_NO_FLUSH2|SCR_DSA_REL2, n)
-#define SCR_LOAD_ABS_F(reg, n)	SCR_LOAD_R(reg, 0, n)
-#define SCR_LOAD_REL_F(reg, n)	SCR_LOAD_R(reg, SCR_DSA_REL2, n)
-
-#define SCR_STORE_ABS(reg, n)	SCR_STORE_R(reg, SCR_NO_FLUSH2, n)
-#define SCR_STORE_REL(reg, n)	SCR_STORE_R(reg, SCR_NO_FLUSH2|SCR_DSA_REL2,n)
-#define SCR_STORE_ABS_F(reg, n)	SCR_STORE_R(reg, 0, n)
-#define SCR_STORE_REL_F(reg, n)	SCR_STORE_R(reg, SCR_DSA_REL2, n)
-
-
-/*-----------------------------------------------------------
-**
-**	Waiting for Disconnect or Reselect
-**
-**-----------------------------------------------------------
-**
-**	JUMP            [ | IFTRUE/IFFALSE ( ... ) ]
-**	<<address>>
-**
-**	JUMPR           [ | IFTRUE/IFFALSE ( ... ) ]
-**	<<distance>>
-**
-**	CALL            [ | IFTRUE/IFFALSE ( ... ) ]
-**	<<address>>
-**
-**	CALLR           [ | IFTRUE/IFFALSE ( ... ) ]
-**	<<distance>>
-**
-**	RETURN          [ | IFTRUE/IFFALSE ( ... ) ]
-**	<<dummy>>
-**
-**	INT             [ | IFTRUE/IFFALSE ( ... ) ]
-**	<<ident>>
-**
-**	INT_FLY         [ | IFTRUE/IFFALSE ( ... ) ]
-**	<<ident>>
-**
-**	Conditions:
-**	     WHEN (phase)
-**	     IF   (phase)
-**	     CARRYSET
-**	     DATA (data, mask)
-**
-**-----------------------------------------------------------
-*/
-
-#define SCR_NO_OP       0x80000000
-#define SCR_JUMP        0x80080000
-#define SCR_JUMP64      0x80480000
-#define SCR_JUMPR       0x80880000
-#define SCR_CALL        0x88080000
-#define SCR_CALLR       0x88880000
-#define SCR_RETURN      0x90080000
-#define SCR_INT         0x98080000
-#define SCR_INT_FLY     0x98180000
-
-#define IFFALSE(arg)   (0x00080000 | (arg))
-#define IFTRUE(arg)    (0x00000000 | (arg))
-
-#define WHEN(phase)    (0x00030000 | (phase))
-#define IF(phase)      (0x00020000 | (phase))
-
-#define DATA(D)        (0x00040000 | ((D) & 0xff))
-#define MASK(D,M)      (0x00040000 | (((M ^ 0xff) & 0xff) << 8ul)|((D) & 0xff))
-
-#define CARRYSET       (0x00200000)
-
-/*-----------------------------------------------------------
-**
-**	SCSI  constants.
-**
-**-----------------------------------------------------------
-*/
-
-/*
-**	Messages
-*/
-
-#define	M_COMPLETE	COMMAND_COMPLETE
-#define	M_EXTENDED	EXTENDED_MESSAGE
-#define	M_SAVE_DP	SAVE_POINTERS
-#define	M_RESTORE_DP	RESTORE_POINTERS
-#define	M_DISCONNECT	DISCONNECT
-#define	M_ID_ERROR	INITIATOR_ERROR
-#define	M_ABORT		ABORT_TASK_SET
-#define	M_REJECT	MESSAGE_REJECT
-#define	M_NOOP		NOP
-#define	M_PARITY	MSG_PARITY_ERROR
-#define	M_LCOMPLETE	LINKED_CMD_COMPLETE
-#define	M_FCOMPLETE	LINKED_FLG_CMD_COMPLETE
-#define	M_RESET		TARGET_RESET
-#define	M_ABORT_TAG	ABORT_TASK
-#define	M_CLEAR_QUEUE	CLEAR_TASK_SET
-#define	M_INIT_REC	INITIATE_RECOVERY
-#define	M_REL_REC	RELEASE_RECOVERY
-#define	M_TERMINATE	(0x11)
-#define	M_SIMPLE_TAG	SIMPLE_QUEUE_TAG
-#define	M_HEAD_TAG	HEAD_OF_QUEUE_TAG
-#define	M_ORDERED_TAG	ORDERED_QUEUE_TAG
-#define	M_IGN_RESIDUE	IGNORE_WIDE_RESIDUE
-#define	M_IDENTIFY   	(0x80)
-
-#define	M_X_MODIFY_DP	EXTENDED_MODIFY_DATA_POINTER
-#define	M_X_SYNC_REQ	EXTENDED_SDTR
-#define	M_X_WIDE_REQ	EXTENDED_WDTR
-#define	M_X_PPR_REQ	EXTENDED_PPR
-
-/*
-**	Status
-*/
-
-#define	S_GOOD		(0x00)
-#define	S_CHECK_COND	(0x02)
-#define	S_COND_MET	(0x04)
-#define	S_BUSY		(0x08)
-#define	S_INT		(0x10)
-#define	S_INT_COND_MET	(0x14)
-#define	S_CONFLICT	(0x18)
-#define	S_TERMINATED	(0x20)
-#define	S_QUEUE_FULL	(0x28)
-#define	S_ILLEGAL	(0xff)
-#define	S_SENSE		(0x80)
-
-/*
- * End of ncrreg from FreeBSD
- */
-
-#endif /* defined SYM53C8XX_DEFS_H */