diff options
author | Linus Torvalds <torvalds@woody.linux-foundation.org> | 2007-07-12 13:40:57 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@woody.linux-foundation.org> | 2007-07-12 13:40:57 -0700 |
commit | 21ba0f88ae56da82a3a15fe54d729208b64c4f4b (patch) | |
tree | 17ce67f276fe3ea7284c3dc730bdd6a2ec7dfe2f /drivers | |
parent | dc690d8ef842b464f1c429a376ca16cb8dbee6ae (diff) | |
parent | 36e235901f90fb83215be43cbd8f1ca14661ea40 (diff) | |
download | kernel_samsung_espresso10-21ba0f88ae56da82a3a15fe54d729208b64c4f4b.zip kernel_samsung_espresso10-21ba0f88ae56da82a3a15fe54d729208b64c4f4b.tar.gz kernel_samsung_espresso10-21ba0f88ae56da82a3a15fe54d729208b64c4f4b.tar.bz2 |
Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (34 commits)
PCI: Only build PCI syscalls on architectures that want them
PCI: limit pci_get_bus_and_slot to domain 0
PCI: hotplug: acpiphp: avoid acpiphp "cannot get bridge info" PCI hotplug failure
PCI: hotplug: acpiphp: remove hot plug parameter write to PCI host bridge
PCI: hotplug: acpiphp: fix slot poweroff problem on systems without _PS3
PCI: hotplug: pciehp: wait for 1 second after power off slot
PCI: pci_set_power_state(): check for PM capabilities earlier
PCI: cpci_hotplug: Convert to use the kthread API
PCI: add pci_try_set_mwi
PCI: pcie: remove SPIN_LOCK_UNLOCKED
PCI: ROUND_UP macro cleanup in drivers/pci
PCI: remove pci_dac_dma_... APIs
PCI: pci-x-pci-express-read-control-interfaces cleanups
PCI: Fix typo in include/linux/pci.h
PCI: pci_ids, remove double or more empty lines
PCI: pci_ids, add atheros and 3com_2 vendors
PCI: pci_ids, reorder some entries
PCI: i386: traps, change VENDOR to DEVICE
PCI: ATM: lanai, change VENDOR to DEVICE
PCI: Change all drivers to use pci_device->revision
...
Diffstat (limited to 'drivers')
107 files changed, 652 insertions, 661 deletions
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index f7de02a..e1ca86d 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -115,7 +115,6 @@ struct acpi_processor_errata errata __read_mostly; static int acpi_processor_errata_piix4(struct pci_dev *dev) { - u8 rev = 0; u8 value1 = 0; u8 value2 = 0; @@ -127,9 +126,7 @@ static int acpi_processor_errata_piix4(struct pci_dev *dev) * Note that 'dev' references the PIIX4 ACPI Controller. */ - pci_read_config_byte(dev, PCI_REVISION_ID, &rev); - - switch (rev) { + switch (dev->revision) { case 0: ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4 A-step\n")); break; @@ -147,7 +144,7 @@ static int acpi_processor_errata_piix4(struct pci_dev *dev) break; } - switch (rev) { + switch (dev->revision) { case 0: /* PIIX4 A-step */ case 1: /* PIIX4 B-step */ diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 21a7ca4..d9fa329 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -928,20 +928,18 @@ static int __devinit piix_check_450nx_errata(struct pci_dev *ata_dev) { struct pci_dev *pdev = NULL; u16 cfg; - u8 rev; int no_piix_dma = 0; while((pdev = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, pdev)) != NULL) { /* Look for 450NX PXB. Check for problem configurations A PCI quirk checks bit 6 already */ - pci_read_config_byte(pdev, PCI_REVISION_ID, &rev); pci_read_config_word(pdev, 0x41, &cfg); /* Only on the original revision: IDE DMA can hang */ - if (rev == 0x00) + if (pdev->revision == 0x00) no_piix_dma = 1; /* On all revisions below 5 PXB bus lock must be disabled for IDE */ - else if (cfg & (1<<14) && rev < 5) + else if (cfg & (1<<14) && pdev->revision < 5) no_piix_dma = 2; } if (no_piix_dma) diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c index 30c4276..0104367 100644 --- a/drivers/ata/pata_ali.c +++ b/drivers/ata/pata_ali.c @@ -455,23 +455,21 @@ static struct ata_port_operations ali_c5_port_ops = { static void ali_init_chipset(struct pci_dev *pdev) { - u8 rev, tmp; + u8 tmp; struct pci_dev *north, *isa_bridge; - pci_read_config_byte(pdev, PCI_REVISION_ID, &rev); - /* * The chipset revision selects the driver operations and * mode data. */ - if (rev >= 0x20 && rev < 0xC2) { + if (pdev->revision >= 0x20 && pdev->revision < 0xC2) { /* 1543-E/F, 1543C-C, 1543C-D, 1543C-E */ pci_read_config_byte(pdev, 0x4B, &tmp); /* Clear CD-ROM DMA write bit */ tmp &= 0x7F; pci_write_config_byte(pdev, 0x4B, tmp); - } else if (rev >= 0xC2) { + } else if (pdev->revision >= 0xC2) { /* Enable cable detection logic */ pci_read_config_byte(pdev, 0x4B, &tmp); pci_write_config_byte(pdev, 0x4B, tmp | 0x08); @@ -483,21 +481,21 @@ static void ali_init_chipset(struct pci_dev *pdev) /* Configure the ALi bridge logic. For non ALi rely on BIOS. Set the south bridge enable bit */ pci_read_config_byte(isa_bridge, 0x79, &tmp); - if (rev == 0xC2) + if (pdev->revision == 0xC2) pci_write_config_byte(isa_bridge, 0x79, tmp | 0x04); - else if (rev > 0xC2 && rev < 0xC5) + else if (pdev->revision > 0xC2 && pdev->revision < 0xC5) pci_write_config_byte(isa_bridge, 0x79, tmp | 0x02); } - if (rev >= 0x20) { + if (pdev->revision >= 0x20) { /* * CD_ROM DMA on (0x53 bit 0). Enable this even if we want * to use PIO. 0x53 bit 1 (rev 20 only) - enable FIFO control * via 0x54/55. */ pci_read_config_byte(pdev, 0x53, &tmp); - if (rev <= 0x20) + if (pdev->revision <= 0x20) tmp &= ~0x02; - if (rev >= 0xc7) + if (pdev->revision >= 0xc7) tmp |= 0x03; else tmp |= 0x01; /* CD_ROM enable for DMA */ @@ -579,25 +577,23 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) }; const struct ata_port_info *ppi[] = { NULL, NULL }; - u8 rev, tmp; + u8 tmp; struct pci_dev *isa_bridge; - pci_read_config_byte(pdev, PCI_REVISION_ID, &rev); - /* * The chipset revision selects the driver operations and * mode data. */ - if (rev < 0x20) { + if (pdev->revision < 0x20) { ppi[0] = &info_early; - } else if (rev < 0xC2) { + } else if (pdev->revision < 0xC2) { ppi[0] = &info_20; - } else if (rev == 0xC2) { + } else if (pdev->revision == 0xC2) { ppi[0] = &info_c2; - } else if (rev == 0xC3) { + } else if (pdev->revision == 0xC3) { ppi[0] = &info_c3; - } else if (rev == 0xC4) { + } else if (pdev->revision == 0xC4) { ppi[0] = &info_c4; } else ppi[0] = &info_c5; @@ -605,7 +601,7 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) ali_init_chipset(pdev); isa_bridge = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL); - if (isa_bridge && rev >= 0x20 && rev < 0xC2) { + if (isa_bridge && pdev->revision >= 0x20 && pdev->revision < 0xC2) { /* Are we paired with a UDMA capable chip */ pci_read_config_byte(isa_bridge, 0x5E, &tmp); if ((tmp & 0x1E) == 0x12) diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c index b9c44c5..b09faca 100644 --- a/drivers/ata/pata_amd.c +++ b/drivers/ata/pata_amd.c @@ -623,17 +623,15 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id) const struct ata_port_info *ppi[] = { NULL, NULL }; static int printed_version; int type = id->driver_data; - u8 rev; u8 fifo; if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); - pci_read_config_byte(pdev, PCI_REVISION_ID, &rev); pci_read_config_byte(pdev, 0x41, &fifo); /* Check for AMD7409 without swdma errata and if found adjust type */ - if (type == 1 && rev > 0x7) + if (type == 1 && pdev->revision > 0x7) type = 2; /* Check for AMD7411 */ diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c index 3fca589..68f150a 100644 --- a/drivers/ata/pata_cs5530.c +++ b/drivers/ata/pata_cs5530.c @@ -266,7 +266,7 @@ static int cs5530_init_chip(void) } pci_set_master(cs5530_0); - pci_set_mwi(cs5530_0); + pci_try_set_mwi(cs5530_0); /* * Set PCI CacheLineSize to 16-bytes: diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c index b67bbf6..430673b 100644 --- a/drivers/ata/pata_it821x.c +++ b/drivers/ata/pata_it821x.c @@ -587,8 +587,7 @@ static int it821x_port_start(struct ata_port *ap) itdev->want[1][1] = ATA_ANY; itdev->last_device = -1; - pci_read_config_byte(pdev, PCI_REVISION_ID, &conf); - if (conf == 0x10) { + if (pdev->revision == 0x11) { itdev->timing10 = 1; /* Need to disable ATAPI DMA for this case */ if (!itdev->smart) diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c index 0231aba..8969154 100644 --- a/drivers/ata/pata_serverworks.c +++ b/drivers/ata/pata_serverworks.c @@ -410,11 +410,8 @@ static int serverworks_fixup_osb4(struct pci_dev *pdev) static int serverworks_fixup_csb(struct pci_dev *pdev) { - u8 rev; u8 btr; - pci_read_config_byte(pdev, PCI_REVISION_ID, &rev); - /* Third Channel Test */ if (!(PCI_FUNC(pdev->devfn) & 1)) { struct pci_dev * findev = NULL; @@ -456,7 +453,7 @@ static int serverworks_fixup_csb(struct pci_dev *pdev) if (!(PCI_FUNC(pdev->devfn) & 1)) btr |= 0x2; else - btr |= (rev >= SVWKS_CSB5_REVISION_NEW) ? 0x3 : 0x2; + btr |= (pdev->revision >= SVWKS_CSB5_REVISION_NEW) ? 0x3 : 0x2; pci_write_config_byte(pdev, 0x5A, btr); return btr; diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c index 657b1ee..9a829a7 100644 --- a/drivers/ata/pata_sis.c +++ b/drivers/ata/pata_sis.c @@ -931,9 +931,7 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) if (host != NULL) { chipset = sets; /* Match found */ if (sets->device == 0x630) { /* SIS630 */ - u8 host_rev; - pci_read_config_byte(host, PCI_REVISION_ID, &host_rev); - if (host_rev >= 0x30) /* 630 ET */ + if (host->revision >= 0x30) /* 630 ET */ chipset = &sis100_early; } break; @@ -977,7 +975,6 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) u16 trueid; u8 prefctl; u8 idecfg; - u8 sbrev; /* Try the second unmasking technique */ pci_read_config_byte(pdev, 0x4a, &idecfg); @@ -990,11 +987,10 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) lpc_bridge = pci_get_slot(pdev->bus, 0x10); /* Bus 0 Dev 2 Fn 0 */ if (lpc_bridge == NULL) break; - pci_read_config_byte(lpc_bridge, PCI_REVISION_ID, &sbrev); pci_read_config_byte(pdev, 0x49, &prefctl); pci_dev_put(lpc_bridge); - if (sbrev == 0x10 && (prefctl & 0x80)) { + if (lpc_bridge->revision == 0x10 && (prefctl & 0x80)) { chipset = &sis133_early; break; } diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c index bde7341..8c2813a 100644 --- a/drivers/ata/pata_sl82c105.c +++ b/drivers/ata/pata_sl82c105.c @@ -270,7 +270,6 @@ static struct ata_port_operations sl82c105_port_ops = { static int sl82c105_bridge_revision(struct pci_dev *pdev) { struct pci_dev *bridge; - u8 rev; /* * The bridge should be part of the same device, but function 0. @@ -292,10 +291,8 @@ static int sl82c105_bridge_revision(struct pci_dev *pdev) /* * We need to find function 0's revision, not function 1 */ - pci_read_config_byte(bridge, PCI_REVISION_ID, &rev); - pci_dev_put(bridge); - return rev; + return bridge->revision; } diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c index f0cadbe..f645fe2 100644 --- a/drivers/ata/pata_via.c +++ b/drivers/ata/pata_via.c @@ -506,7 +506,6 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id) struct pci_dev *isa = NULL; const struct via_isa_bridge *config; static int printed_version; - u8 t; u8 enable; u32 timing; @@ -520,9 +519,8 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id) !!(config->flags & VIA_BAD_ID), config->id, NULL))) { - pci_read_config_byte(isa, PCI_REVISION_ID, &t); - if (t >= config->rev_min && - t <= config->rev_max) + if (isa->revision >= config->rev_min && + isa->revision <= config->rev_max) break; pci_dev_put(isa); } diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 8a77a0a..5d57643 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -1765,12 +1765,9 @@ static void mv5_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val) static void mv5_reset_bus(struct pci_dev *pdev, void __iomem *mmio) { - u8 rev_id; int early_5080; - pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id); - - early_5080 = (pdev->device == 0x5080) && (rev_id == 0); + early_5080 = (pdev->device == 0x5080) && (pdev->revision == 0); if (!early_5080) { u32 tmp = readl(mmio + MV_PCI_EXP_ROM_BAR_CTL); @@ -2387,17 +2384,14 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx) { struct pci_dev *pdev = to_pci_dev(host->dev); struct mv_host_priv *hpriv = host->private_data; - u8 rev_id; u32 hp_flags = hpriv->hp_flags; - pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id); - switch(board_idx) { case chip_5080: hpriv->ops = &mv5xxx_ops; hp_flags |= MV_HP_GEN_I; - switch (rev_id) { + switch (pdev->revision) { case 0x1: hp_flags |= MV_HP_ERRATA_50XXB0; break; @@ -2417,7 +2411,7 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx) hpriv->ops = &mv5xxx_ops; hp_flags |= MV_HP_GEN_I; - switch (rev_id) { + switch (pdev->revision) { case 0x0: hp_flags |= MV_HP_ERRATA_50XXB0; break; @@ -2437,7 +2431,7 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx) hpriv->ops = &mv6xxx_ops; hp_flags |= MV_HP_GEN_II; - switch (rev_id) { + switch (pdev->revision) { case 0x7: hp_flags |= MV_HP_ERRATA_60X1B2; break; @@ -2457,7 +2451,7 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx) hpriv->ops = &mv6xxx_ops; hp_flags |= MV_HP_GEN_IIE; - switch (rev_id) { + switch (pdev->revision) { case 0x0: hp_flags |= MV_HP_ERRATA_XX42A0; break; @@ -2585,14 +2579,12 @@ static void mv_print_info(struct ata_host *host) { struct pci_dev *pdev = to_pci_dev(host->dev); struct mv_host_priv *hpriv = host->private_data; - u8 rev_id, scc; + u8 scc; const char *scc_s, *gen; /* Use this to determine the HW stepping of the chip so we know * what errata to workaround */ - pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id); - pci_read_config_byte(pdev, PCI_CLASS_DEVICE, &scc); if (scc == 0) scc_s = "SCSI"; diff --git a/drivers/atm/eni.c b/drivers/atm/eni.c index 0d3a38b..77637e7 100644 --- a/drivers/atm/eni.c +++ b/drivers/atm/eni.c @@ -1704,7 +1704,6 @@ static int __devinit eni_do_init(struct atm_dev *dev) struct pci_dev *pci_dev; unsigned long real_base; void __iomem *base; - unsigned char revision; int error,i,last; DPRINTK(">eni_init\n"); @@ -1715,12 +1714,6 @@ static int __devinit eni_do_init(struct atm_dev *dev) pci_dev = eni_dev->pci_dev; real_base = pci_resource_start(pci_dev, 0); eni_dev->irq = pci_dev->irq; - error = pci_read_config_byte(pci_dev,PCI_REVISION_ID,&revision); - if (error) { - printk(KERN_ERR DEV_LABEL "(itf %d): init error 0x%02x\n", - dev->number,error); - return -EINVAL; - } if ((error = pci_write_config_word(pci_dev,PCI_COMMAND, PCI_COMMAND_MEMORY | (eni_dev->asic ? PCI_COMMAND_PARITY | PCI_COMMAND_SERR : 0)))) { @@ -1729,7 +1722,7 @@ static int __devinit eni_do_init(struct atm_dev *dev) return -EIO; } printk(KERN_NOTICE DEV_LABEL "(itf %d): rev.%d,base=0x%lx,irq=%d,", - dev->number,revision,real_base,eni_dev->irq); + dev->number,pci_dev->revision,real_base,eni_dev->irq); if (!(base = ioremap_nocache(real_base,MAP_MAX_SIZE))) { printk("\n"); printk(KERN_ERR DEV_LABEL "(itf %d): can't set up page " diff --git a/drivers/atm/idt77252.c b/drivers/atm/idt77252.c index 3800bc0..8f995ce 100644 --- a/drivers/atm/idt77252.c +++ b/drivers/atm/idt77252.c @@ -3679,7 +3679,6 @@ idt77252_init_one(struct pci_dev *pcidev, const struct pci_device_id *id) unsigned long membase, srambase; struct idt77252_dev *card; struct atm_dev *dev; - ushort revision = 0; int i, err; @@ -3688,19 +3687,13 @@ idt77252_init_one(struct pci_dev *pcidev, const struct pci_device_id *id) return err; } - if (pci_read_config_word(pcidev, PCI_REVISION_ID, &revision)) { - printk("idt77252-%d: can't read PCI_REVISION_ID\n", index); - err = -ENODEV; - goto err_out_disable_pdev; - } - card = kzalloc(sizeof(struct idt77252_dev), GFP_KERNEL); if (!card) { printk("idt77252-%d: can't allocate private data\n", index); err = -ENOMEM; goto err_out_disable_pdev; } - card->revision = revision; + card->revision = pcidev->revision; card->index = index; card->pcidev = pcidev; sprintf(card->name, "idt77252-%d", card->index); @@ -3762,8 +3755,8 @@ idt77252_init_one(struct pci_dev *pcidev, const struct pci_device_id *id) } printk("%s: ABR SAR (Rev %c): MEM %08lx SRAM %08lx [%u KB]\n", - card->name, ((revision > 1) && (revision < 25)) ? - 'A' + revision - 1 : '?', membase, srambase, + card->name, ((card->revision > 1) && (card->revision < 25)) ? + 'A' + card->revision - 1 : '?', membase, srambase, card->sramsize / 1024); if (init_card(dev)) { diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c index bb7ef57..a3b605a 100644 --- a/drivers/atm/iphase.c +++ b/drivers/atm/iphase.c @@ -2290,7 +2290,6 @@ static int __devinit ia_init(struct atm_dev *dev) unsigned long real_base; void __iomem *base; unsigned short command; - unsigned char revision; int error, i; /* The device has been identified and registered. Now we read @@ -2305,16 +2304,14 @@ static int __devinit ia_init(struct atm_dev *dev) real_base = pci_resource_start (iadev->pci, 0); iadev->irq = iadev->pci->irq; - if ((error = pci_read_config_word(iadev->pci, PCI_COMMAND,&command)) - || (error = pci_read_config_byte(iadev->pci, - PCI_REVISION_ID,&revision))) - { + error = pci_read_config_word(iadev->pci, PCI_COMMAND, &command); + if (error) { printk(KERN_ERR DEV_LABEL "(itf %d): init error 0x%x\n", dev->number,error); return -EINVAL; } IF_INIT(printk(DEV_LABEL "(itf %d): rev.%d,realbase=0x%lx,irq=%d\n", - dev->number, revision, real_base, iadev->irq);) + dev->number, iadev->pci->revision, real_base, iadev->irq);) /* find mapping size of board */ @@ -2353,7 +2350,7 @@ static int __devinit ia_init(struct atm_dev *dev) return error; } IF_INIT(printk(DEV_LABEL " (itf %d): rev.%d,base=%p,irq=%d\n", - dev->number, revision, base, iadev->irq);) + dev->number, iadev->pci->revision, base, iadev->irq);) /* filling the iphase dev structure */ iadev->mem = iadev->pci_map_size /2; diff --git a/drivers/atm/lanai.c b/drivers/atm/lanai.c index 09f477d..0e2c1ae 100644 --- a/drivers/atm/lanai.c +++ b/drivers/atm/lanai.c @@ -246,8 +246,8 @@ struct lanai_vcc { }; enum lanai_type { - lanai2 = PCI_VENDOR_ID_EF_ATM_LANAI2, - lanaihb = PCI_VENDOR_ID_EF_ATM_LANAIHB + lanai2 = PCI_DEVICE_ID_EF_ATM_LANAI2, + lanaihb = PCI_DEVICE_ID_EF_ATM_LANAIHB }; struct lanai_dev_stats { @@ -293,7 +293,6 @@ struct lanai_dev { struct atm_vcc *cbrvcc; int number; int board_rev; - u8 pci_revision; /* TODO - look at race conditions with maintence of conf1/conf2 */ /* TODO - transmit locking: should we use _irq not _irqsave? */ /* TODO - organize above in some rational fashion (see <asm/cache.h>) */ @@ -1969,14 +1968,6 @@ static int __devinit lanai_pci_start(struct lanai_dev *lanai) "(itf %d): No suitable DMA available.\n", lanai->number); return -EBUSY; } - /* Get the pci revision byte */ - result = pci_read_config_byte(pci, PCI_REVISION_ID, - &lanai->pci_revision); - if (result != PCIBIOS_SUCCESSFUL) { - printk(KERN_ERR DEV_LABEL "(itf %d): can't read " - "PCI_REVISION_ID: %d\n", lanai->number, result); - return -EINVAL; - } result = pci_read_config_word(pci, PCI_SUBSYSTEM_ID, &w); if (result != PCIBIOS_SUCCESSFUL) { printk(KERN_ERR DEV_LABEL "(itf %d): can't read " @@ -2254,7 +2245,7 @@ static int __devinit lanai_dev_open(struct atm_dev *atmdev) lanai_timed_poll_start(lanai); printk(KERN_NOTICE DEV_LABEL "(itf %d): rev.%d, base=0x%lx, irq=%u " "(%02X-%02X-%02X-%02X-%02X-%02X)\n", lanai->number, - (int) lanai->pci_revision, (unsigned long) lanai->base, + (int) lanai->pci->revision, (unsigned long) lanai->base, lanai->pci->irq, atmdev->esi[0], atmdev->esi[1], atmdev->esi[2], atmdev->esi[3], atmdev->esi[4], atmdev->esi[5]); @@ -2491,7 +2482,7 @@ static int lanai_proc_read(struct atm_dev *atmdev, loff_t *pos, char *page) (unsigned int) lanai->magicno, lanai->num_vci); if (left-- == 0) return sprintf(page, "revision: board=%d, pci_if=%d\n", - lanai->board_rev, (int) lanai->pci_revision); + lanai->board_rev, (int) lanai->pci->revision); if (left-- == 0) return sprintf(page, "EEPROM ESI: " "%02X:%02X:%02X:%02X:%02X:%02X\n", @@ -2631,14 +2622,8 @@ static int __devinit lanai_init_one(struct pci_dev *pci, } static struct pci_device_id lanai_pci_tbl[] = { - { - PCI_VENDOR_ID_EF, PCI_VENDOR_ID_EF_ATM_LANAI2, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 - }, - { - PCI_VENDOR_ID_EF, PCI_VENDOR_ID_EF_ATM_LANAIHB, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 - }, + { PCI_VDEVICE(EF, PCI_DEVICE_ID_EF_ATM_LANAI2) }, + { PCI_VDEVICE(EF, PCI_DEVICE_ID_EF_ATM_LANAIHB) }, { 0, } /* terminal entry */ }; MODULE_DEVICE_TABLE(pci, lanai_pci_tbl); diff --git a/drivers/atm/zatm.c b/drivers/atm/zatm.c index 2ad2527..020a87a 100644 --- a/drivers/atm/zatm.c +++ b/drivers/atm/zatm.c @@ -1182,7 +1182,6 @@ static int __devinit zatm_init(struct atm_dev *dev) struct zatm_dev *zatm_dev; struct pci_dev *pci_dev; unsigned short command; - unsigned char revision; int error,i,last; unsigned long t0,t1,t2; @@ -1192,8 +1191,7 @@ static int __devinit zatm_init(struct atm_dev *dev) pci_dev = zatm_dev->pci_dev; zatm_dev->base = pci_resource_start(pci_dev, 0); zatm_dev->irq = pci_dev->irq; - if ((error = pci_read_config_word(pci_dev,PCI_COMMAND,&command)) || - (error = pci_read_config_byte(pci_dev,PCI_REVISION_ID,&revision))) { + if ((error = pci_read_config_word(pci_dev,PCI_COMMAND,&command))) { printk(KERN_ERR DEV_LABEL "(itf %d): init error 0x%02x\n", dev->number,error); return -EINVAL; @@ -1206,7 +1204,7 @@ static int __devinit zatm_init(struct atm_dev *dev) } eprom_get_esi(dev); printk(KERN_NOTICE DEV_LABEL "(itf %d): rev.%d,base=0x%x,irq=%d,", - dev->number,revision,zatm_dev->base,zatm_dev->irq); + dev->number,pci_dev->revision,zatm_dev->base,zatm_dev->irq); /* reset uPD98401 */ zout(0,SWR); while (!(zin(GSR) & uPD98401_INT_IND)); diff --git a/drivers/char/agp/amd-k7-agp.c b/drivers/char/agp/amd-k7-agp.c index e6c534e..df0ddf1 100644 --- a/drivers/char/agp/amd-k7-agp.c +++ b/drivers/char/agp/amd-k7-agp.c @@ -462,9 +462,7 @@ static int __devinit agp_amdk7_probe(struct pci_dev *pdev, * erratum 46: Setup violation on AGP SBA pins - Disable side band addressing. * With this lot disabled, we should prevent lockups. */ if (agp_bridge->dev->device == PCI_DEVICE_ID_AMD_FE_GATE_700E) { - u8 revision=0; - pci_read_config_byte(pdev, PCI_REVISION_ID, &revision); - if (revision == 0x10 || revision == 0x11) { + if (pdev->revision == 0x10 || pdev->revision == 0x11) { agp_bridge->flags = AGP_ERRATA_FASTWRITES; agp_bridge->flags |= AGP_ERRATA_SBA; agp_bridge->flags |= AGP_ERRATA_1X; diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c index 801abdd..d95662e 100644 --- a/drivers/char/agp/amd64-agp.c +++ b/drivers/char/agp/amd64-agp.c @@ -367,10 +367,8 @@ static __devinit int cache_nbs (struct pci_dev *pdev, u32 cap_ptr) static void __devinit amd8151_init(struct pci_dev *pdev, struct agp_bridge_data *bridge) { char *revstring; - u8 rev_id; - pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id); - switch (rev_id) { + switch (pdev->revision) { case 0x01: revstring="A0"; break; case 0x02: revstring="A1"; break; case 0x11: revstring="B0"; break; @@ -386,7 +384,7 @@ static void __devinit amd8151_init(struct pci_dev *pdev, struct agp_bridge_data * Work around errata. * Chips before B2 stepping incorrectly reporting v3.5 */ - if (rev_id < 0x13) { + if (pdev->revision < 0x13) { printk (KERN_INFO PFX "Correcting AGP revision (reports 3.5, is really 3.0)\n"); bridge->major_version = 3; bridge->minor_version = 0; diff --git a/drivers/clocksource/acpi_pm.c b/drivers/clocksource/acpi_pm.c index 5cfcff5..e783dbf 100644 --- a/drivers/clocksource/acpi_pm.c +++ b/drivers/clocksource/acpi_pm.c @@ -105,14 +105,11 @@ static inline void acpi_pm_need_workaround(void) */ static void __devinit acpi_pm_check_blacklist(struct pci_dev *dev) { - u8 rev; - if (acpi_pm_good) return; - pci_read_config_byte(dev, PCI_REVISION_ID, &rev); /* the bug has been fixed in PIIX4M */ - if (rev < 3) { + if (dev->revision < 3) { printk(KERN_WARNING "* Found PM-Timer Bug on the chipset." " Due to workarounds for a bug,\n" "* this clock source is slow. Consider trying" diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c index a0f7e4a..edc2750 100644 --- a/drivers/i2c/busses/i2c-viapro.c +++ b/drivers/i2c/busses/i2c-viapro.c @@ -397,8 +397,7 @@ found: case PCI_DEVICE_ID_VIA_82C686_4: /* The VT82C686B (rev 0x40) does support I2C block transactions, but the VT82C686A (rev 0x30) doesn't */ - if (!pci_read_config_byte(pdev, PCI_REVISION_ID, &temp) - && temp >= 0x40) + if (pdev->revision >= 0x40) vt596_features |= FEATURE_I2CBLOCK; break; } diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c index 8a6b27b..ba0fb92b 100644 --- a/drivers/ide/pci/alim15x3.c +++ b/drivers/ide/pci/alim15x3.c @@ -508,7 +508,7 @@ static unsigned int __devinit init_chipset_ali15x3 (struct pci_dev *dev, const c u8 tmpbyte; struct pci_dev *north = pci_get_slot(dev->bus, PCI_DEVFN(0,0)); - pci_read_config_byte(dev, PCI_REVISION_ID, &m5229_revision); + m5229_revision = dev->revision; isa_dev = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL); diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c index 84ed30c..8d30b99 100644 --- a/drivers/ide/pci/amd74xx.c +++ b/drivers/ide/pci/amd74xx.c @@ -123,8 +123,7 @@ static int amd74xx_get_info(char *buffer, char **addr, off_t offset, int count) amd_print("Driver Version: 2.13"); amd_print("South Bridge: %s", pci_name(bmide_dev)); - pci_read_config_byte(dev, PCI_REVISION_ID, &t); - amd_print("Revision: IDE %#x", t); + amd_print("Revision: IDE %#x", dev->revision); amd_print("Highest DMA rate: UDMA%s", amd_dma[fls(amd_config->udma_mask) - 1]); amd_print("BM-DMA base: %#lx", amd_base); @@ -312,8 +311,7 @@ static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev, const ch */ if (amd_config->flags & AMD_CHECK_SWDMA) { - pci_read_config_byte(dev, PCI_REVISION_ID, &t); - if (t <= 7) + if (dev->revision <= 7) amd_config->flags |= AMD_BAD_SWDMA; } @@ -383,7 +381,7 @@ static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev, const ch pci_read_config_byte(dev, PCI_REVISION_ID, &t); printk(KERN_INFO "%s: %s (rev %02x) UDMA%s controller\n", - amd_chipset->name, pci_name(dev), t, + amd_chipset->name, pci_name(dev), dev->revision, amd_dma[fls(amd_config->udma_mask) - 1]); /* diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c index 8631b6c..1e89dd6 100644 --- a/drivers/ide/pci/cmd64x.c +++ b/drivers/ide/pci/cmd64x.c @@ -88,7 +88,6 @@ static char * print_cmd64x_get_info (char *buf, struct pci_dev *dev, int index) u8 reg72 = 0, reg73 = 0; /* primary */ u8 reg7a = 0, reg7b = 0; /* secondary */ u8 reg50 = 1, reg51 = 1, reg57 = 0, reg71 = 0; /* extra */ - u8 rev = 0; p += sprintf(p, "\nController: %d\n", index); p += sprintf(p, "PCI-%x Chipset.\n", dev->device); @@ -103,9 +102,8 @@ static char * print_cmd64x_get_info (char *buf, struct pci_dev *dev, int index) (void) pci_read_config_byte(dev, UDIDETCR1, ®7b); /* PCI0643/6 originally didn't have the primary channel enable bit */ - (void) pci_read_config_byte(dev, PCI_REVISION_ID, &rev); if ((dev->device == PCI_DEVICE_ID_CMD_643) || - (dev->device == PCI_DEVICE_ID_CMD_646 && rev < 3)) + (dev->device == PCI_DEVICE_ID_CMD_646 && dev->revision < 3)) reg51 |= CNTRL_ENA_1ST; p += sprintf(p, "---------------- Primary Channel " @@ -604,14 +602,11 @@ static int __devinit init_setup_cmd64x(struct pci_dev *dev, ide_pci_device_t *d) static int __devinit init_setup_cmd646(struct pci_dev *dev, ide_pci_device_t *d) { - u8 rev = 0; - /* * The original PCI0646 didn't have the primary channel enable bit, * it appeared starting with PCI0646U (i.e. revision ID 3). */ - pci_read_config_byte(dev, PCI_REVISION_ID, &rev); - if (rev < 3) + if (dev->revision < 3) d->enablebits[0].reg = 0; return ide_setup_pci_device(dev, d); diff --git a/drivers/ide/pci/cs5530.c b/drivers/ide/pci/cs5530.c index 1eec1f3..b5c00d1 100644 --- a/drivers/ide/pci/cs5530.c +++ b/drivers/ide/pci/cs5530.c @@ -236,7 +236,7 @@ static unsigned int __devinit init_chipset_cs5530 (struct pci_dev *dev, const ch */ pci_set_master(cs5530_0); - pci_set_mwi(cs5530_0); + pci_try_set_mwi(cs5530_0); /* * Set PCI CacheLineSize to 16-bytes: diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c index 4b6bae8..e9b07a9 100644 --- a/drivers/ide/pci/hpt366.c +++ b/drivers/ide/pci/hpt366.c @@ -1413,11 +1413,9 @@ static int __devinit init_setup_hpt372n(struct pci_dev *dev, ide_pci_device_t *d static int __devinit init_setup_hpt371(struct pci_dev *dev, ide_pci_device_t *d) { struct hpt_info *info; - u8 rev = 0, mcr1 = 0; + u8 mcr1 = 0; - pci_read_config_byte(dev, PCI_REVISION_ID, &rev); - - if (rev > 1) { + if (dev->revision > 1) { d->name = "HPT371N"; info = &hpt371n; @@ -1442,11 +1440,8 @@ static int __devinit init_setup_hpt371(struct pci_dev *dev, ide_pci_device_t *d) static int __devinit init_setup_hpt372a(struct pci_dev *dev, ide_pci_device_t *d) { struct hpt_info *info; - u8 rev = 0; - - pci_read_config_byte(dev, PCI_REVISION_ID, &rev); - if (rev > 1) { + if (dev->revision > 1) { d->name = "HPT372N"; info = &hpt372n; @@ -1460,11 +1455,8 @@ static int __devinit init_setup_hpt372a(struct pci_dev *dev, ide_pci_device_t *d static int __devinit init_setup_hpt302(struct pci_dev *dev, ide_pci_device_t *d) { struct hpt_info *info; - u8 rev = 0; - pci_read_config_byte(dev, PCI_REVISION_ID, &rev); - - if (rev > 1) { + if (dev->revision > 1) { d->name = "HPT302N"; info = &hpt302n; @@ -1478,7 +1470,7 @@ static int __devinit init_setup_hpt302(struct pci_dev *dev, ide_pci_device_t *d) static int __devinit init_setup_hpt366(struct pci_dev *dev, ide_pci_device_t *d) { struct pci_dev *dev2; - u8 rev = 0; + u8 rev = dev->revision; static char *chipset_names[] = { "HPT366", "HPT366", "HPT368", "HPT370", "HPT370A", "HPT372", "HPT372N" }; @@ -1489,8 +1481,6 @@ static int __devinit init_setup_hpt366(struct pci_dev *dev, ide_pci_device_t *d) if (PCI_FUNC(dev->devfn) & 1) return -ENODEV; - pci_read_config_byte(dev, PCI_REVISION_ID, &rev); - switch (rev) { case 0: case 1: diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c index 2e0b29e..1372c35 100644 --- a/drivers/ide/pci/piix.c +++ b/drivers/ide/pci/piix.c @@ -572,18 +572,16 @@ static void __devinit piix_check_450nx(void) { struct pci_dev *pdev = NULL; u16 cfg; - u8 rev; while((pdev=pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, pdev))!=NULL) { /* Look for 450NX PXB. Check for problem configurations A PCI quirk checks bit 6 already */ - pci_read_config_byte(pdev, PCI_REVISION_ID, &rev); pci_read_config_word(pdev, 0x41, &cfg); /* Only on the original revision: IDE DMA can hang */ - if(rev == 0x00) + if (pdev->revision == 0x00) no_piix_dma = 1; /* On all revisions below 5 PXB bus lock must be disabled for IDE */ - else if(cfg & (1<<14) && rev < 5) + else if (cfg & (1<<14) && pdev->revision < 5) no_piix_dma = 2; } if(no_piix_dma) diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c index 1371b5b..ed04e0c 100644 --- a/drivers/ide/pci/serverworks.c +++ b/drivers/ide/pci/serverworks.c @@ -55,7 +55,6 @@ static const char *svwks_bad_ata100[] = { NULL }; -static u8 svwks_revision = 0; static struct pci_dev *isa_dev; static int check_in_drive_lists (ide_drive_t *drive, const char **list) @@ -71,9 +70,6 @@ static u8 svwks_udma_filter(ide_drive_t *drive) struct pci_dev *dev = HWIF(drive)->pci_dev; u8 mask = 0; - if (!svwks_revision) - pci_read_config_byte(dev, PCI_REVISION_ID, &svwks_revision); - if (dev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE) return 0x1f; if (dev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) { @@ -88,9 +84,9 @@ static u8 svwks_udma_filter(ide_drive_t *drive) return 0; /* Check the OSB4 DMA33 enable bit */ return ((reg & 0x00004000) == 0x00004000) ? 0x07 : 0; - } else if (svwks_revision < SVWKS_CSB5_REVISION_NEW) { + } else if (dev->revision < SVWKS_CSB5_REVISION_NEW) { return 0x07; - } else if (svwks_revision >= SVWKS_CSB5_REVISION_NEW) { + } else if (dev->revision >= SVWKS_CSB5_REVISION_NEW) { u8 btr = 0, mode; pci_read_config_byte(dev, 0x5A, &btr); mode = btr & 0x3; @@ -234,9 +230,6 @@ static unsigned int __devinit init_chipset_svwks (struct pci_dev *dev, const cha unsigned int reg; u8 btr; - /* save revision id to determine DMA capability */ - pci_read_config_byte(dev, PCI_REVISION_ID, &svwks_revision); - /* force Master Latency Timer value to 64 PCICLKs */ pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x40); @@ -315,7 +308,7 @@ static unsigned int __devinit init_chipset_svwks (struct pci_dev *dev, const cha if (!(PCI_FUNC(dev->devfn) & 1)) btr |= 0x2; else - btr |= (svwks_revision >= SVWKS_CSB5_REVISION_NEW) ? 0x3 : 0x2; + btr |= (dev->revision >= SVWKS_CSB5_REVISION_NEW) ? 0x3 : 0x2; pci_write_config_byte(dev, 0x5A, btr); } /* Setup HT1000 SouthBridge Controller - Single Channel Only */ diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c index f875183..756a9b6 100644 --- a/drivers/ide/pci/sis5513.c +++ b/drivers/ide/pci/sis5513.c @@ -659,9 +659,7 @@ static unsigned int __devinit init_chipset_sis5513 (struct pci_dev *dev, const c /* Special case for SiS630 : 630S/ET is ATA_100a */ if (SiSHostChipInfo[i].host_id == PCI_DEVICE_ID_SI_630) { - u8 hostrev; - pci_read_config_byte(host, PCI_REVISION_ID, &hostrev); - if (hostrev >= 0x30) + if (host->revision >= 0x30) chipset_family = ATA_100a; } pci_dev_put(host); @@ -702,7 +700,6 @@ static unsigned int __devinit init_chipset_sis5513 (struct pci_dev *dev, const c u16 trueid; u8 prefctl; u8 idecfg; - u8 sbrev; pci_read_config_byte(dev, 0x4a, &idecfg); pci_write_config_byte(dev, 0x4a, idecfg | 0x10); @@ -712,11 +709,10 @@ static unsigned int __devinit init_chipset_sis5513 (struct pci_dev *dev, const c if (trueid == 0x5517) { /* SiS 961/961B */ lpc_bridge = pci_get_slot(dev->bus, 0x10); /* Bus 0, Dev 2, Fn 0 */ - pci_read_config_byte(lpc_bridge, PCI_REVISION_ID, &sbrev); pci_read_config_byte(dev, 0x49, &prefctl); pci_dev_put(lpc_bridge); - if (sbrev == 0x10 && (prefctl & 0x80)) { + if (lpc_bridge->revision == 0x10 && (prefctl & 0x80)) { printk(KERN_INFO "SIS5513: SiS 961B MuTIOL IDE UDMA133 controller\n"); chipset_family = ATA_133a; } else { diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c index 4878798..a7323d2 100644 --- a/drivers/ide/pci/sl82c105.c +++ b/drivers/ide/pci/sl82c105.c @@ -338,7 +338,6 @@ static void sl82c105_tune_drive(ide_drive_t *drive, u8 pio) static unsigned int sl82c105_bridge_revision(struct pci_dev *dev) { struct pci_dev *bridge; - u8 rev; /* * The bridge should be part of the same device, but function 0. @@ -360,10 +359,9 @@ static unsigned int sl82c105_bridge_revision(struct pci_dev *dev) /* * We need to find function 0's revision, not function 1 */ - pci_read_config_byte(bridge, PCI_REVISION_ID, &rev); pci_dev_put(bridge); - return rev; + return bridge->revision; } /* diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c index d21dd2e..27e92fb 100644 --- a/drivers/ide/pci/via82cxxx.c +++ b/drivers/ide/pci/via82cxxx.c @@ -237,16 +237,14 @@ static int via82cxxx_ide_dma_check (ide_drive_t *drive) static struct via_isa_bridge *via_config_find(struct pci_dev **isa) { struct via_isa_bridge *via_config; - u8 t; for (via_config = via_isa_bridges; via_config->id; via_config++) if ((*isa = pci_get_device(PCI_VENDOR_ID_VIA + !!(via_config->flags & VIA_BAD_ID), via_config->id, NULL))) { - pci_read_config_byte(*isa, PCI_REVISION_ID, &t); - if (t >= via_config->rev_min && - t <= via_config->rev_max) + if ((*isa)->revision >= via_config->rev_min && + (*isa)->revision <= via_config->rev_max) break; pci_dev_put(*isa); } @@ -404,10 +402,9 @@ static unsigned int __devinit init_chipset_via82cxxx(struct pci_dev *dev, const * Print the boot message. */ - pci_read_config_byte(isa, PCI_REVISION_ID, &t); printk(KERN_INFO "VP_IDE: VIA %s (rev %02x) IDE %sDMA%s " "controller on pci%s\n", - via_config->name, t, + via_config->name, isa->revision, via_config->udma_mask ? "U" : "MW", via_dma[via_config->udma_mask ? (fls(via_config->udma_mask) - 1) : 0], diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c index e3a2232..834e86f 100644 --- a/drivers/infiniband/hw/ipath/ipath_driver.c +++ b/drivers/infiniband/hw/ipath/ipath_driver.c @@ -270,7 +270,6 @@ static int __devinit ipath_init_one(struct pci_dev *pdev, struct ipath_devdata *dd; unsigned long long addr; u32 bar0 = 0, bar1 = 0; - u8 rev; dd = ipath_alloc_devdata(pdev); if (IS_ERR(dd)) { @@ -432,13 +431,7 @@ static int __devinit ipath_init_one(struct pci_dev *pdev, dd->ipath_deviceid = ent->device; /* save for later use */ dd->ipath_vendorid = ent->vendor; - ret = pci_read_config_byte(pdev, PCI_REVISION_ID, &rev); - if (ret) { - ipath_dev_err(dd, "Failed to read PCI revision ID unit " - "%u: err %d\n", dd->ipath_unit, -ret); - goto bail_regions; /* shouldn't ever happen */ - } - dd->ipath_pcirev = rev; + dd->ipath_pcirev = pdev->revision; #if defined(__powerpc__) /* There isn't a generic way to specify writethrough mappings */ diff --git a/drivers/isdn/hisax/bkm_a8.c b/drivers/isdn/hisax/bkm_a8.c index 3403106..6339bb4 100644 --- a/drivers/isdn/hisax/bkm_a8.c +++ b/drivers/isdn/hisax/bkm_a8.c @@ -287,7 +287,6 @@ setup_sct_quadro(struct IsdnCard *card) #ifdef CONFIG_PCI struct IsdnCardState *cs = card->cs; char tmp[64]; - u_char pci_rev_id; u_int found = 0; u_int pci_ioaddr1, pci_ioaddr2, pci_ioaddr3, pci_ioaddr4, pci_ioaddr5; @@ -335,8 +334,7 @@ setup_sct_quadro(struct IsdnCard *card) } #ifdef ATTEMPT_PCI_REMAPPING /* HACK: PLX revision 1 bug: PLX address bit 7 must not be set */ - pci_read_config_byte(dev_a8, PCI_REVISION_ID, &pci_rev_id); - if ((pci_ioaddr1 & 0x80) && (pci_rev_id == 1)) { + if ((pci_ioaddr1 & 0x80) && (dev_a8->revision == 1)) { printk(KERN_WARNING "HiSax: %s (%s): PLX rev 1, remapping required!\n", CardType[card->typ], sct_quadro_subtypes[cs->subtyp]); diff --git a/drivers/media/radio/radio-gemtek-pci.c b/drivers/media/radio/radio-gemtek-pci.c index fdf5d6e..5e6f17d 100644 --- a/drivers/media/radio/radio-gemtek-pci.c +++ b/drivers/media/radio/radio-gemtek-pci.c @@ -94,7 +94,6 @@ struct gemtek_pci_card { u32 iobase; u32 length; - u8 chiprev; u16 model; u32 current_frequency; @@ -415,7 +414,6 @@ static int __devinit gemtek_pci_probe( struct pci_dev *pci_dev, const struct pci goto err_pci; } - pci_read_config_byte( pci_dev, PCI_REVISION_ID, &card->chiprev ); pci_read_config_word( pci_dev, PCI_SUBSYSTEM_ID, &card->model ); pci_set_drvdata( pci_dev, card ); @@ -436,7 +434,7 @@ static int __devinit gemtek_pci_probe( struct pci_dev *pci_dev, const struct pci gemtek_pci_mute( card ); printk( KERN_INFO "Gemtek PCI Radio (rev. %d) found at 0x%04x-0x%04x.\n", - card->chiprev, card->iobase, card->iobase + card->length - 1 ); + pci_dev->revision, card->iobase, card->iobase + card->length - 1 ); return 0; diff --git a/drivers/media/video/meye.c b/drivers/media/video/meye.c index 664aba8..7533fc2 100644 --- a/drivers/media/video/meye.c +++ b/drivers/media/video/meye.c @@ -1809,7 +1809,6 @@ static int __devinit meye_probe(struct pci_dev *pcidev, { int ret = -EBUSY; unsigned long mchip_adr; - u8 revision; if (meye.mchip_dev != NULL) { printk(KERN_ERR "meye: only one device allowed!\n"); @@ -1885,7 +1884,6 @@ static int __devinit meye_probe(struct pci_dev *pcidev, goto outreqirq; } - pci_read_config_byte(meye.mchip_dev, PCI_REVISION_ID, &revision); pci_write_config_byte(meye.mchip_dev, PCI_CACHE_LINE_SIZE, 8); pci_write_config_byte(meye.mchip_dev, PCI_LATENCY_TIMER, 64); @@ -1939,7 +1937,7 @@ static int __devinit meye_probe(struct pci_dev *pcidev, printk(KERN_INFO "meye: Motion Eye Camera Driver v%s.\n", MEYE_DRIVER_VERSION); printk(KERN_INFO "meye: mchip KL5A72002 rev. %d, base %lx, irq %d\n", - revision, mchip_adr, meye.mchip_irq); + meye.mchip_dev->revision, mchip_adr, meye.mchip_irq); return 0; diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c index 58bbc3e..807e699 100644 --- a/drivers/net/8139cp.c +++ b/drivers/net/8139cp.c @@ -1799,7 +1799,6 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) void __iomem *regs; resource_size_t pciaddr; unsigned int addr_len, i, pci_using_dac; - u8 pci_rev; #ifndef MODULE static int version_printed; @@ -1807,13 +1806,11 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) printk("%s", version); #endif - pci_read_config_byte(pdev, PCI_REVISION_ID, &pci_rev); - if (pdev->vendor == PCI_VENDOR_ID_REALTEK && - pdev->device == PCI_DEVICE_ID_REALTEK_8139 && pci_rev < 0x20) { + pdev->device == PCI_DEVICE_ID_REALTEK_8139 && pdev->revision < 0x20) { dev_err(&pdev->dev, "This (id %04x:%04x rev %02x) is not an 8139C+ compatible chip\n", - pdev->vendor, pdev->device, pci_rev); + pdev->vendor, pdev->device, pdev->revision); dev_err(&pdev->dev, "Try the \"8139too\" driver instead.\n"); return -ENODEV; } diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c index 21a6ccb..327eaa7 100644 --- a/drivers/net/8139too.c +++ b/drivers/net/8139too.c @@ -931,7 +931,6 @@ static int __devinit rtl8139_init_one (struct pci_dev *pdev, int i, addr_len, option; void __iomem *ioaddr; static int board_idx = -1; - u8 pci_rev; assert (pdev != NULL); assert (ent != NULL); @@ -949,13 +948,11 @@ static int __devinit rtl8139_init_one (struct pci_dev *pdev, } #endif - pci_read_config_byte(pdev, PCI_REVISION_ID, &pci_rev); - if (pdev->vendor == PCI_VENDOR_ID_REALTEK && - pdev->device == PCI_DEVICE_ID_REALTEK_8139 && pci_rev >= 0x20) { + pdev->device == PCI_DEVICE_ID_REALTEK_8139 && pdev->revision >= 0x20) { dev_info(&pdev->dev, "This (id %04x:%04x rev %02x) is an enhanced 8139C+ chip\n", - pdev->vendor, pdev->device, pci_rev); + pdev->vendor, pdev->device, pdev->revision); dev_info(&pdev->dev, "Use the \"8139cp\" driver for improved performance and stability.\n"); } diff --git a/drivers/net/atl1/atl1.h b/drivers/net/atl1/atl1.h index b1c6034..df4c1a0 100644 --- a/drivers/net/atl1/atl1.h +++ b/drivers/net/atl1/atl1.h @@ -210,7 +210,6 @@ struct atl1_hw { u16 phy_spd_default; u16 dev_rev; - u8 revision_id; /* spi flash */ u8 flash_vendor; diff --git a/drivers/net/atl1/atl1_main.c b/drivers/net/atl1/atl1_main.c index 3bb40dd..501919e 100644 --- a/drivers/net/atl1/atl1_main.c +++ b/drivers/net/atl1/atl1_main.c @@ -118,10 +118,6 @@ static int __devinit atl1_sw_init(struct atl1_adapter *adapter) { struct atl1_hw *hw = &adapter->hw; struct net_device *netdev = adapter->netdev; - struct pci_dev *pdev = adapter->pdev; - - /* PCI config space info */ - pci_read_config_byte(pdev, PCI_REVISION_ID, &hw->revision_id); hw->max_frame_size = netdev->mtu + ENET_HEADER_SIZE + ETHERNET_FCS_SIZE; hw->min_frame_size = MINIMUM_ETHERNET_FRAME_SIZE; diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index d681903..02e994b 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -6736,10 +6736,9 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) while ((amd_8132 = pci_get_device(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE, amd_8132))) { - u8 rev; - pci_read_config_byte(amd_8132, PCI_REVISION_ID, &rev); - if (rev >= 0x10 && rev <= 0x13) { + if (amd_8132->revision >= 0x10 && + amd_8132->revision <= 0x13) { disable_msi = 1; pci_dev_put(amd_8132); break; diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c index 59b9943..f6e4030 100644 --- a/drivers/net/cassini.c +++ b/drivers/net/cassini.c @@ -3422,21 +3422,19 @@ done: static void cas_check_pci_invariants(struct cas *cp) { struct pci_dev *pdev = cp->pdev; - u8 rev; cp->cas_flags = 0; - pci_read_config_byte(pdev, PCI_REVISION_ID, &rev); if ((pdev->vendor == PCI_VENDOR_ID_SUN) && (pdev->device == PCI_DEVICE_ID_SUN_CASSINI)) { - if (rev >= CAS_ID_REVPLUS) + if (pdev->revision >= CAS_ID_REVPLUS) cp->cas_flags |= CAS_FLAG_REG_PLUS; - if (rev < CAS_ID_REVPLUS02u) + if (pdev->revision < CAS_ID_REVPLUS02u) cp->cas_flags |= CAS_FLAG_TARGET_ABORT; /* Original Cassini supports HW CSUM, but it's not * enabled by default as it can trigger TX hangs. */ - if (rev < CAS_ID_REV2) + if (pdev->revision < CAS_ID_REV2) cp->cas_flags |= CAS_FLAG_NO_HW_CSUM; } else { /* Only sun has original cassini chips. */ @@ -4919,13 +4917,13 @@ static int __devinit cas_init_one(struct pci_dev *pdev, pci_cmd &= ~PCI_COMMAND_SERR; pci_cmd |= PCI_COMMAND_PARITY; pci_write_config_word(pdev, PCI_COMMAND, pci_cmd); - if (pci_set_mwi(pdev)) + if (pci_try_set_mwi(pdev)) printk(KERN_WARNING PFX "Could not enable MWI for %s\n", pci_name(pdev)); /* * On some architectures, the default cache line size set - * by pci_set_mwi reduces perforamnce. We have to increase + * by pci_try_set_mwi reduces perforamnce. We have to increase * it for this case. To start, we'll print some configuration * data. */ diff --git a/drivers/net/dl2k.c b/drivers/net/dl2k.c index a4ace07..04e3710 100644 --- a/drivers/net/dl2k.c +++ b/drivers/net/dl2k.c @@ -250,7 +250,6 @@ rio_probe1 (struct pci_dev *pdev, const struct pci_device_id *ent) np->an_enable = 1; mii_set_media (dev); } - pci_read_config_byte(pdev, PCI_REVISION_ID, &np->pci_rev_id); err = register_netdev (dev); if (err) @@ -879,7 +878,7 @@ receive_packet (struct net_device *dev) skb->protocol = eth_type_trans (skb, dev); #if 0 /* Checksum done by hw, but csum value unavailable. */ - if (np->pci_rev_id >= 0x0c && + if (np->pdev->pci_rev_id >= 0x0c && !(frame_status & (TCPError | UDPError | IPError))) { skb->ip_summed = CHECKSUM_UNNECESSARY; } diff --git a/drivers/net/dl2k.h b/drivers/net/dl2k.h index 814c449..e443065 100644 --- a/drivers/net/dl2k.h +++ b/drivers/net/dl2k.h @@ -668,7 +668,6 @@ struct netdev_private { unsigned int rx_flow:1; /* Rx flow control enable */ unsigned int phy_media:1; /* 1: fiber, 0: copper */ unsigned int link_status:1; /* Current link status */ - unsigned char pci_rev_id; /* PCI revision ID */ struct netdev_desc *last_tx; /* Last Tx descriptor used. */ unsigned long cur_rx, old_rx; /* Producer/consumer ring indices */ unsigned long cur_tx, old_tx; diff --git a/drivers/net/e100.c b/drivers/net/e100.c index 74ea637..6b6401e 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -583,7 +583,6 @@ struct nic { u32 rx_tco_frames; u32 rx_over_length_errors; - u8 rev_id; u16 leds; u16 eeprom_wc; u16 eeprom[256]; @@ -937,9 +936,8 @@ static void e100_get_defaults(struct nic *nic) struct param_range rfds = { .min = 16, .max = 256, .count = 256 }; struct param_range cbs = { .min = 64, .max = 256, .count = 128 }; - pci_read_config_byte(nic->pdev, PCI_REVISION_ID, &nic->rev_id); /* MAC type is encoded as rev ID; exception: ICH is treated as 82559 */ - nic->mac = (nic->flags & ich) ? mac_82559_D101M : nic->rev_id; + nic->mac = (nic->flags & ich) ? mac_82559_D101M : nic->pdev->revision; if(nic->mac == mac_unknown) nic->mac = mac_82557_D100_A; @@ -1279,7 +1277,7 @@ static void e100_setup_ucode(struct nic *nic, struct cb *cb, struct sk_buff *skb if (nic->flags & ich) goto noloaducode; - /* Search for ucode match against h/w rev_id */ + /* Search for ucode match against h/w revision */ for (opts = ucode_opts; opts->mac; opts++) { int i; u32 *ucode = opts->ucode; @@ -2238,7 +2236,7 @@ static void e100_get_regs(struct net_device *netdev, u32 *buff = p; int i; - regs->version = (1 << 24) | nic->rev_id; + regs->version = (1 << 24) | nic->pdev->revision; buff[0] = ioread8(&nic->csr->scb.cmd_hi) << 24 | ioread8(&nic->csr->scb.cmd_lo) << 16 | ioread16(&nic->csr->scb.status); diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index cf8af92..f48b659 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -1266,8 +1266,7 @@ e1000_sw_init(struct e1000_adapter *adapter) hw->device_id = pdev->device; hw->subsystem_vendor_id = pdev->subsystem_vendor; hw->subsystem_id = pdev->subsystem_device; - - pci_read_config_byte(pdev, PCI_REVISION_ID, &hw->revision_id); + hw->revision_id = pdev->revision; pci_read_config_word(pdev, PCI_COMMAND, &hw->pci_cmd_word); diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index 42ba1c0..67046e8 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -5084,15 +5084,13 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i np->wolenabled = 0; if (id->driver_data & DEV_HAS_POWER_CNTRL) { - u8 revision_id; - pci_read_config_byte(pci_dev, PCI_REVISION_ID, &revision_id); /* take phy and nic out of low power mode */ powerstate = readl(base + NvRegPowerState2); powerstate &= ~NVREG_POWERSTATE2_POWERUP_MASK; if ((id->device == PCI_DEVICE_ID_NVIDIA_NVENET_12 || id->device == PCI_DEVICE_ID_NVIDIA_NVENET_13) && - revision_id >= 0xA3) + pci_dev->revision >= 0xA3) powerstate |= NVREG_POWERSTATE2_POWERUP_REV_A3; writel(powerstate, base + NvRegPowerState2); } diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index 56f8197..b703ccf 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -54,8 +54,6 @@ static char netxen_nic_driver_string[] = "NetXen Network Driver version " #define NETXEN_ADAPTER_UP_MAGIC 777 #define NETXEN_NIC_PEG_TUNE 0 -u8 nx_p2_id = NX_P2_C0; - #define DMA_32BIT_MASK 0x00000000ffffffffULL #define DMA_35BIT_MASK 0x00000007ffffffffULL @@ -307,8 +305,7 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) goto err_out_disable_pdev; pci_set_master(pdev); - pci_read_config_byte(pdev, PCI_REVISION_ID, &nx_p2_id); - if (nx_p2_id == NX_P2_C1 && + if (pdev->revision == NX_P2_C1 && (pci_set_dma_mask(pdev, DMA_35BIT_MASK) == 0) && (pci_set_consistent_dma_mask(pdev, DMA_35BIT_MASK) == 0)) { pci_using_dac = 1; @@ -552,7 +549,7 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) INIT_WORK(&adapter->watchdog_task, netxen_watchdog_task); adapter->ahw.pdev = pdev; adapter->proc_cmd_buf_counter = 0; - adapter->ahw.revision_id = nx_p2_id; + adapter->ahw.revision_id = pdev->revision; /* make sure Window == 1 */ netxen_nic_pci_change_crbwindow(adapter, 1); diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index fa29a40..58bbfdd 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -1135,7 +1135,7 @@ static int init_nic(struct s2io_nic *nic) * SXE-008 TRANSMIT DMA ARBITRATION ISSUE. */ if ((nic->device_type == XFRAME_I_DEVICE) && - (get_xena_rev_id(nic->pdev) < 4)) + (nic->pdev->revision < 4)) writeq(PCC_ENABLE_FOUR, &bar0->pcc_enable); val64 = readq(&bar0->tx_fifo_partition_0); @@ -1873,7 +1873,7 @@ static int verify_pcc_quiescent(struct s2io_nic *sp, int flag) herc = (sp->device_type == XFRAME_II_DEVICE); if (flag == FALSE) { - if ((!herc && (get_xena_rev_id(sp->pdev) >= 4)) || herc) { + if ((!herc && (sp->pdev->revision >= 4)) || herc) { if (!(val64 & ADAPTER_STATUS_RMAC_PCC_IDLE)) ret = 1; } else { @@ -1881,7 +1881,7 @@ static int verify_pcc_quiescent(struct s2io_nic *sp, int flag) ret = 1; } } else { - if ((!herc && (get_xena_rev_id(sp->pdev) >= 4)) || herc) { + if ((!herc && (sp->pdev->revision >= 4)) || herc) { if (((val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) == ADAPTER_STATUS_RMAC_PCC_IDLE)) ret = 1; @@ -7076,23 +7076,6 @@ static void s2io_link(struct s2io_nic * sp, int link) } /** - * get_xena_rev_id - to identify revision ID of xena. - * @pdev : PCI Dev structure - * Description: - * Function to identify the Revision ID of xena. - * Return value: - * returns the revision ID of the device. - */ - -static int get_xena_rev_id(struct pci_dev *pdev) -{ - u8 id = 0; - int ret; - ret = pci_read_config_byte(pdev, PCI_REVISION_ID, (u8 *) & id); - return id; -} - -/** * s2io_init_pci -Initialization of PCI and PCI-X configuration registers . * @sp : private member of the device structure, which is a pointer to the * s2io_nic structure. @@ -7550,7 +7533,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) s2io_vpd_read(sp); DBG_PRINT(ERR_DBG, "Copyright(c) 2002-2007 Neterion Inc.\n"); DBG_PRINT(ERR_DBG, "%s: Neterion %s (rev %d)\n",dev->name, - sp->product_name, get_xena_rev_id(sp->pdev)); + sp->product_name, pdev->revision); DBG_PRINT(ERR_DBG, "%s: Driver version %s\n", dev->name, s2io_driver_version); DBG_PRINT(ERR_DBG, "%s: MAC ADDR: " diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h index 5859278..3887fe6 100644 --- a/drivers/net/s2io.h +++ b/drivers/net/s2io.h @@ -1033,7 +1033,6 @@ static void s2io_set_link(struct work_struct *work); static int s2io_set_swapper(struct s2io_nic * sp); static void s2io_card_down(struct s2io_nic *nic); static int s2io_card_up(struct s2io_nic *nic); -static int get_xena_rev_id(struct pci_dev *pdev); static int wait_for_cmd_complete(void __iomem *addr, u64 busy_bit, int bit_state); static int s2io_add_isr(struct s2io_nic * sp); diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c index f2e1019..8b64786 100644 --- a/drivers/net/starfire.c +++ b/drivers/net/starfire.c @@ -740,7 +740,7 @@ static int __devinit starfire_init_one(struct pci_dev *pdev, pci_set_master(pdev); /* enable MWI -- it vastly improves Rx performance on sparc64 */ - pci_set_mwi(pdev); + pci_try_set_mwi(pdev); #ifdef ZEROCOPY /* Starfire can do TCP/UDP checksumming */ diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c index c8ba534..af0c983 100644 --- a/drivers/net/sundance.c +++ b/drivers/net/sundance.c @@ -397,7 +397,6 @@ struct netdev_private { unsigned char phys[MII_CNT]; /* MII device addresses, only first one used. */ struct pci_dev *pci_dev; void __iomem *base; - unsigned char pci_rev_id; }; /* The station address location in the EEPROM. */ @@ -544,8 +543,6 @@ static int __devinit sundance_probe1 (struct pci_dev *pdev, dev->change_mtu = &change_mtu; pci_set_drvdata(pdev, dev); - pci_read_config_byte(pdev, PCI_REVISION_ID, &np->pci_rev_id); - i = register_netdev(dev); if (i) goto err_out_unmap_rx; @@ -828,7 +825,7 @@ static int netdev_open(struct net_device *dev) iowrite8(100, ioaddr + RxDMAPollPeriod); iowrite8(127, ioaddr + TxDMAPollPeriod); /* Fix DFE-580TX packet drop issue */ - if (np->pci_rev_id >= 0x14) + if (np->pci_dev->revision >= 0x14) iowrite8(0x01, ioaddr + DebugCtrl1); netif_start_queue(dev); @@ -1194,7 +1191,7 @@ static irqreturn_t intr_handler(int irq, void *dev_instance) hw_frame_id = ioread8(ioaddr + TxFrameId); } - if (np->pci_rev_id >= 0x14) { + if (np->pci_dev->revision >= 0x14) { spin_lock(&np->lock); for (; np->cur_tx - np->dirty_tx > 0; np->dirty_tx++) { int entry = np->dirty_tx % TX_RING_SIZE; diff --git a/drivers/net/sunhme.c b/drivers/net/sunhme.c index 15146a1..8b35f13 100644 --- a/drivers/net/sunhme.c +++ b/drivers/net/sunhme.c @@ -3095,12 +3095,8 @@ static int __devinit happy_meal_pci_probe(struct pci_dev *pdev, #ifdef CONFIG_SPARC hp->hm_revision = of_getintprop_default(dp, "hm-rev", 0xff); - if (hp->hm_revision == 0xff) { - unsigned char prev; - - pci_read_config_byte(pdev, PCI_REVISION_ID, &prev); - hp->hm_revision = 0xc0 | (prev & 0x0f); - } + if (hp->hm_revision == 0xff) + hp->hm_revision = 0xc0 | (pdev->revision & 0x0f); #else /* works with this on non-sparc hosts */ hp->hm_revision = 0x20; diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 3245f16..32e4037 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -10551,11 +10551,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp) continue; } if (pci_id->rev != PCI_ANY_ID) { - u8 rev; - - pci_read_config_byte(bridge, PCI_REVISION_ID, - &rev); - if (rev > pci_id->rev) + if (bridge->revision > pci_id->rev) continue; } if (bridge->subordinate && diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c index 106dc1e..74eb121 100644 --- a/drivers/net/tlan.c +++ b/drivers/net/tlan.c @@ -533,7 +533,6 @@ static int __devinit TLan_probe1(struct pci_dev *pdev, struct net_device *dev; TLanPrivateInfo *priv; - u8 pci_rev; u16 device_id; int reg, rc = -ENODEV; @@ -577,8 +576,6 @@ static int __devinit TLan_probe1(struct pci_dev *pdev, goto err_out_free_dev; } - pci_read_config_byte ( pdev, PCI_REVISION_ID, &pci_rev); - for ( reg= 0; reg <= 5; reg ++ ) { if (pci_resource_flags(pdev, reg) & IORESOURCE_IO) { pci_io_base = pci_resource_start(pdev, reg); @@ -595,7 +592,7 @@ static int __devinit TLan_probe1(struct pci_dev *pdev, dev->base_addr = pci_io_base; dev->irq = pdev->irq; - priv->adapterRev = pci_rev; + priv->adapterRev = pdev->revision; pci_set_master(pdev); pci_set_drvdata(pdev, dev); diff --git a/drivers/net/tulip/de4x5.c b/drivers/net/tulip/de4x5.c index 42fca26..0990289 100644 --- a/drivers/net/tulip/de4x5.c +++ b/drivers/net/tulip/de4x5.c @@ -2134,7 +2134,7 @@ srom_search(struct net_device *dev, struct pci_dev *pdev) u_short vendor, status; u_int irq = 0, device; u_long iobase = 0; /* Clear upper 32 bits in Alphas */ - int i, j, cfrv; + int i, j; struct de4x5_private *lp = netdev_priv(dev); struct list_head *walk; @@ -2150,7 +2150,6 @@ srom_search(struct net_device *dev, struct pci_dev *pdev) /* Get the chip configuration revision register */ pb = this_dev->bus->number; - pci_read_config_dword(this_dev, PCI_REVISION_ID, &cfrv); /* Set the device number information */ lp->device = PCI_SLOT(this_dev->devfn); @@ -2158,7 +2157,8 @@ srom_search(struct net_device *dev, struct pci_dev *pdev) /* Set the chipset information */ if (is_DC2114x) { - device = ((cfrv & CFRV_RN) < DC2114x_BRK ? DC21142 : DC21143); + device = ((this_dev->revision & CFRV_RN) < DC2114x_BRK + ? DC21142 : DC21143); } lp->chipset = device; @@ -2254,7 +2254,7 @@ static int __devinit de4x5_pci_probe (struct pci_dev *pdev, } /* Get the chip configuration revision register */ - pci_read_config_dword(pdev, PCI_REVISION_ID, &lp->cfrv); + lp->cfrv = pdev->revision; /* Set the device number information */ lp->device = dev_num; diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c index 4ed67ff..dab74fe 100644 --- a/drivers/net/tulip/dmfe.c +++ b/drivers/net/tulip/dmfe.c @@ -181,11 +181,12 @@ udelay(5); #define __CHK_IO_SIZE(pci_id, dev_rev) \ - (( ((pci_id)==PCI_DM9132_ID) || ((dev_rev) >= 0x02000030) ) ? \ + (( ((pci_id)==PCI_DM9132_ID) || ((dev_rev) >= 0x30) ) ? \ DM9102A_IO_SIZE: DM9102_IO_SIZE) -#define CHK_IO_SIZE(pci_dev, dev_rev) \ - (__CHK_IO_SIZE(((pci_dev)->device << 16) | (pci_dev)->vendor, dev_rev)) +#define CHK_IO_SIZE(pci_dev) \ + (__CHK_IO_SIZE(((pci_dev)->device << 16) | (pci_dev)->vendor, \ + (pci_dev)->revision)) /* Sten Check */ #define DEVICE net_device @@ -205,7 +206,7 @@ struct rx_desc { struct dmfe_board_info { u32 chip_id; /* Chip vendor/Device ID */ - u32 chip_revision; /* Chip revision */ + u8 chip_revision; /* Chip revision */ struct DEVICE *next_dev; /* next device */ struct pci_dev *pdev; /* PCI device */ spinlock_t lock; @@ -359,7 +360,7 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev, { struct dmfe_board_info *db; /* board information structure */ struct net_device *dev; - u32 dev_rev, pci_pmr; + u32 pci_pmr; int i, err; DMFE_DBUG(0, "dmfe_init_one()", 0); @@ -392,10 +393,7 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev, goto err_out_disable; } - /* Read Chip revision */ - pci_read_config_dword(pdev, PCI_REVISION_ID, &dev_rev); - - if (pci_resource_len(pdev, 0) < (CHK_IO_SIZE(pdev, dev_rev)) ) { + if (pci_resource_len(pdev, 0) < (CHK_IO_SIZE(pdev)) ) { printk(KERN_ERR DRV_NAME ": Allocated I/O size too small\n"); err = -ENODEV; goto err_out_disable; @@ -433,7 +431,7 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev, db->chip_id = ent->driver_data; db->ioaddr = pci_resource_start(pdev, 0); - db->chip_revision = dev_rev; + db->chip_revision = pdev->revision; db->wol_mode = 0; db->pdev = pdev; @@ -455,7 +453,7 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev, pci_read_config_dword(pdev, 0x50, &pci_pmr); pci_pmr &= 0x70000; - if ( (pci_pmr == 0x10000) && (dev_rev == 0x02000031) ) + if ( (pci_pmr == 0x10000) && (db->chip_revision == 0x31) ) db->chip_type = 1; /* DM9102A E3 */ else db->chip_type = 0; @@ -553,7 +551,7 @@ static int dmfe_open(struct DEVICE *dev) /* CR6 operation mode decision */ if ( !chkmode || (db->chip_id == PCI_DM9132_ID) || - (db->chip_revision >= 0x02000030) ) { + (db->chip_revision >= 0x30) ) { db->cr6_data |= DMFE_TXTH_256; db->cr0_data = CR0_DEFAULT; db->dm910x_chk_mode=4; /* Enter the normal mode */ @@ -1199,9 +1197,9 @@ static void dmfe_timer(unsigned long data) tmp_cr12 = inb(db->ioaddr + DCR12); /* DM9102/DM9102A */ if ( ((db->chip_id == PCI_DM9102_ID) && - (db->chip_revision == 0x02000030)) || + (db->chip_revision == 0x30)) || ((db->chip_id == PCI_DM9132_ID) && - (db->chip_revision == 0x02000010)) ) { + (db->chip_revision == 0x10)) ) { /* DM9102A Chip */ if (tmp_cr12 & 2) link_ok = 0; diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c index 041af63..7dcd138 100644 --- a/drivers/net/tulip/tulip_core.c +++ b/drivers/net/tulip/tulip_core.c @@ -1155,7 +1155,7 @@ static void __devinit tulip_mwi_config (struct pci_dev *pdev, /* set or disable MWI in the standard PCI command bit. * Check for the case where mwi is desired but not available */ - if (csr0 & MWI) pci_set_mwi(pdev); + if (csr0 & MWI) pci_try_set_mwi(pdev); else pci_clear_mwi(pdev); /* read result from hardware (in case bit refused to enable) */ @@ -1238,7 +1238,6 @@ static int __devinit tulip_init_one (struct pci_dev *pdev, }; static int last_irq; static int multiport_cnt; /* For four-port boards w/one EEPROM */ - u8 chip_rev; int i, irq; unsigned short sum; unsigned char *ee_data; @@ -1274,10 +1273,8 @@ static int __devinit tulip_init_one (struct pci_dev *pdev, if (pdev->vendor == 0x1282 && pdev->device == 0x9100) { - u32 dev_rev; /* Read Chip revision */ - pci_read_config_dword(pdev, PCI_REVISION_ID, &dev_rev); - if(dev_rev < 0x02000030) + if (pdev->revision < 0x02000030) { printk(KERN_ERR PFX "skipping early DM9100 with Crc bug (use dmfe)\n"); return -ENODEV; @@ -1360,8 +1357,6 @@ static int __devinit tulip_init_one (struct pci_dev *pdev, if (!ioaddr) goto err_out_free_res; - pci_read_config_byte (pdev, PCI_REVISION_ID, &chip_rev); - /* * initialize private data structure 'tp' * it is zeroed and aligned in alloc_etherdev @@ -1382,7 +1377,7 @@ static int __devinit tulip_init_one (struct pci_dev *pdev, tp->flags = tulip_tbl[chip_idx].flags; tp->pdev = pdev; tp->base_addr = ioaddr; - tp->revision = chip_rev; + tp->revision = pdev->revision; tp->csr0 = csr0; spin_lock_init(&tp->lock); spin_lock_init(&tp->mii_lock); @@ -1399,7 +1394,7 @@ static int __devinit tulip_init_one (struct pci_dev *pdev, tulip_mwi_config (pdev, dev); #else /* MWI is broken for DC21143 rev 65... */ - if (chip_idx == DC21143 && chip_rev == 65) + if (chip_idx == DC21143 && pdev->revision == 65) tp->csr0 &= ~MWI; #endif @@ -1640,7 +1635,7 @@ static int __devinit tulip_init_one (struct pci_dev *pdev, #else "Port" #endif - " %#llx,", dev->name, chip_name, chip_rev, + " %#llx,", dev->name, chip_name, pdev->revision, (unsigned long long) pci_resource_start(pdev, TULIP_BAR)); pci_set_drvdata(pdev, dev); diff --git a/drivers/net/tulip/xircom_cb.c b/drivers/net/tulip/xircom_cb.c index 37e35cd..16a54e6 100644 --- a/drivers/net/tulip/xircom_cb.c +++ b/drivers/net/tulip/xircom_cb.c @@ -205,7 +205,6 @@ static int __devinit xircom_probe(struct pci_dev *pdev, const struct pci_device_ { struct net_device *dev = NULL; struct xircom_private *private; - unsigned char chip_rev; unsigned long flags; unsigned short tmp16; enter("xircom_probe"); @@ -224,8 +223,6 @@ static int __devinit xircom_probe(struct pci_dev *pdev, const struct pci_device_ pci_read_config_word (pdev,PCI_STATUS, &tmp16); pci_write_config_word (pdev, PCI_STATUS,tmp16); - pci_read_config_byte(pdev, PCI_REVISION_ID, &chip_rev); - if (!request_region(pci_resource_start(pdev, 0), 128, "xircom_cb")) { printk(KERN_ERR "xircom_probe: failed to allocate io-region\n"); return -ENODEV; @@ -286,7 +283,7 @@ static int __devinit xircom_probe(struct pci_dev *pdev, const struct pci_device_ goto reg_fail; } - printk(KERN_INFO "%s: Xircom cardbus revision %i at irq %i \n", dev->name, chip_rev, pdev->irq); + printk(KERN_INFO "%s: Xircom cardbus revision %i at irq %i \n", dev->name, pdev->revision, pdev->irq); /* start the transmitter to get a heartbeat */ /* TODO: send 2 dummy packets here */ transceiver_voodoo(private); diff --git a/drivers/net/tulip/xircom_tulip_cb.c b/drivers/net/tulip/xircom_tulip_cb.c index f984fbd..fc439f3 100644 --- a/drivers/net/tulip/xircom_tulip_cb.c +++ b/drivers/net/tulip/xircom_tulip_cb.c @@ -524,7 +524,6 @@ static int __devinit xircom_init_one(struct pci_dev *pdev, const struct pci_devi int chip_idx = id->driver_data; long ioaddr; int i; - u8 chip_rev; /* when built into the kernel, we only print version if device is found */ #ifndef MODULE @@ -620,9 +619,8 @@ static int __devinit xircom_init_one(struct pci_dev *pdev, const struct pci_devi if (register_netdev(dev)) goto err_out_cleardev; - pci_read_config_byte(pdev, PCI_REVISION_ID, &chip_rev); printk(KERN_INFO "%s: %s rev %d at %#3lx,", - dev->name, xircom_tbl[chip_idx].chip_name, chip_rev, ioaddr); + dev->name, xircom_tbl[chip_idx].chip_name, pdev->revision, ioaddr); for (i = 0; i < 6; i++) printk("%c%2.2X", i ? ':' : ' ', dev->dev_addr[i]); printk(", IRQ %d.\n", dev->irq); diff --git a/drivers/net/typhoon.c b/drivers/net/typhoon.c index df52454..0358720 100644 --- a/drivers/net/typhoon.c +++ b/drivers/net/typhoon.c @@ -2267,12 +2267,6 @@ need_resume: typhoon_resume(pdev); return -EBUSY; } - -static int -typhoon_enable_wake(struct pci_dev *pdev, pci_power_t state, int enable) -{ - return pci_enable_wake(pdev, state, enable); -} #endif static int __devinit @@ -2636,7 +2630,6 @@ static struct pci_driver typhoon_driver = { #ifdef CONFIG_PM .suspend = typhoon_suspend, .resume = typhoon_resume, - .enable_wake = typhoon_enable_wake, #endif }; diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c index 565f6cc..f51c2c1 100644 --- a/drivers/net/via-rhine.c +++ b/drivers/net/via-rhine.c @@ -622,7 +622,6 @@ static int __devinit rhine_init_one(struct pci_dev *pdev, struct net_device *dev; struct rhine_private *rp; int i, rc; - u8 pci_rev; u32 quirks; long pioaddr; long memaddr; @@ -642,27 +641,25 @@ static int __devinit rhine_init_one(struct pci_dev *pdev, printk(version); #endif - pci_read_config_byte(pdev, PCI_REVISION_ID, &pci_rev); - io_size = 256; phy_id = 0; quirks = 0; name = "Rhine"; - if (pci_rev < VTunknown0) { + if (pdev->revision < VTunknown0) { quirks = rqRhineI; io_size = 128; } - else if (pci_rev >= VT6102) { + else if (pdev->revision >= VT6102) { quirks = rqWOL | rqForceReset; - if (pci_rev < VT6105) { + if (pdev->revision < VT6105) { name = "Rhine II"; quirks |= rqStatusWBRace; /* Rhine-II exclusive */ } else { phy_id = 1; /* Integrated PHY, phy_id fixed to 1 */ - if (pci_rev >= VT6105_B0) + if (pdev->revision >= VT6105_B0) quirks |= rq6patterns; - if (pci_rev < VT6105M) + if (pdev->revision < VT6105M) name = "Rhine III"; else name = "Rhine III (Management Adapter)"; diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c index b670b97..f331843 100644 --- a/drivers/net/via-velocity.c +++ b/drivers/net/via-velocity.c @@ -890,8 +890,7 @@ static void __devinit velocity_init_info(struct pci_dev *pdev, static int __devinit velocity_get_pci_info(struct velocity_info *vptr, struct pci_dev *pdev) { - if (pci_read_config_byte(pdev, PCI_REVISION_ID, &vptr->rev_id) < 0) - return -EIO; + vptr->rev_id = pdev->revision; pci_set_master(pdev); diff --git a/drivers/net/wan/pc300_drv.c b/drivers/net/wan/pc300_drv.c index 999bf71..ec1c556 100644 --- a/drivers/net/wan/pc300_drv.c +++ b/drivers/net/wan/pc300_drv.c @@ -3439,7 +3439,6 @@ static int __devinit cpc_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { static int first_time = 1; - ucchar cpc_rev_id; int err, eeprom_outdated = 0; ucshort device_id; pc300_t *card; @@ -3480,7 +3479,6 @@ cpc_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) card->hw.falcsize = pci_resource_len(pdev, 4); card->hw.plxphys = pci_resource_start(pdev, 5); card->hw.plxsize = pci_resource_len(pdev, 5); - pci_read_config_byte(pdev, PCI_REVISION_ID, &cpc_rev_id); switch (device_id) { case PCI_DEVICE_ID_PC300_RX_1: @@ -3498,7 +3496,7 @@ cpc_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) } #ifdef PC300_DEBUG_PCI printk("cpc (bus=0x0%x,pci_id=0x%x,", pdev->bus->number, pdev->devfn); - printk("rev_id=%d) IRQ%d\n", cpc_rev_id, card->hw.irq); + printk("rev_id=%d) IRQ%d\n", pdev->revision, card->hw.irq); printk("cpc:found ramaddr=0x%08lx plxaddr=0x%08lx " "ctladdr=0x%08lx falcaddr=0x%08lx\n", card->hw.ramphys, card->hw.plxphys, card->hw.scaphys, diff --git a/drivers/net/wan/pc300too.c b/drivers/net/wan/pc300too.c index aff05db..dfbd3b0 100644 --- a/drivers/net/wan/pc300too.c +++ b/drivers/net/wan/pc300too.c @@ -311,7 +311,6 @@ static int __devinit pc300_pci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { card_t *card; - u8 rev_id; u32 __iomem *p; int i; u32 ramsize; @@ -366,7 +365,6 @@ static int __devinit pc300_pci_init_one(struct pci_dev *pdev, return -ENOMEM; } - pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id); if (pci_resource_len(pdev, 0) != PC300_PLX_SIZE || pci_resource_len(pdev, 2) != PC300_SCA_SIZE || pci_resource_len(pdev, 3) < 16384) { diff --git a/drivers/net/wan/pci200syn.c b/drivers/net/wan/pci200syn.c index ca06a00..7f720de 100644 --- a/drivers/net/wan/pci200syn.c +++ b/drivers/net/wan/pci200syn.c @@ -289,7 +289,6 @@ static int __devinit pci200_pci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { card_t *card; - u8 rev_id; u32 __iomem *p; int i; u32 ramsize; @@ -330,7 +329,6 @@ static int __devinit pci200_pci_init_one(struct pci_dev *pdev, return -ENOMEM; } - pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id); if (pci_resource_len(pdev, 0) != PCI200SYN_PLX_SIZE || pci_resource_len(pdev, 2) != PCI200SYN_SCA_SIZE || pci_resource_len(pdev, 3) < 16384) { diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.c b/drivers/net/wireless/bcm43xx/bcm43xx_main.c index ef6b253..c5d6753 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_main.c +++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.c @@ -3741,10 +3741,8 @@ static int bcm43xx_attach_board(struct bcm43xx_private *bcm) &bcm->board_type); if (err) goto err_iounmap; - err = bcm43xx_pci_read_config16(bcm, PCI_REVISION_ID, - &bcm->board_revision); - if (err) - goto err_iounmap; + + bcm->board_revision = bcm->pci_dev->revision; err = bcm43xx_chipset_attach(bcm); if (err) diff --git a/drivers/net/wireless/hostap/hostap_pci.c b/drivers/net/wireless/hostap/hostap_pci.c index 0cd48d1..7da3664 100644 --- a/drivers/net/wireless/hostap/hostap_pci.c +++ b/drivers/net/wireless/hostap/hostap_pci.c @@ -453,8 +453,6 @@ static struct pci_driver prism2_pci_drv_id = { .suspend = prism2_pci_suspend, .resume = prism2_pci_resume, #endif /* CONFIG_PM */ - /* Linux 2.4.6 added save_state and enable_wake that are not used here - */ }; diff --git a/drivers/net/wireless/hostap/hostap_plx.c b/drivers/net/wireless/hostap/hostap_plx.c index 0183df7..040dc3e 100644 --- a/drivers/net/wireless/hostap/hostap_plx.c +++ b/drivers/net/wireless/hostap/hostap_plx.c @@ -613,9 +613,6 @@ static struct pci_driver prism2_plx_drv_id = { .id_table = prism2_plx_id_table, .probe = prism2_plx_probe, .remove = prism2_plx_remove, - .suspend = NULL, - .resume = NULL, - .enable_wake = NULL }; diff --git a/drivers/net/wireless/prism54/islpci_hotplug.c b/drivers/net/wireless/prism54/islpci_hotplug.c index 3dcb13b..af2e4f2 100644 --- a/drivers/net/wireless/prism54/islpci_hotplug.c +++ b/drivers/net/wireless/prism54/islpci_hotplug.c @@ -87,7 +87,6 @@ static struct pci_driver prism54_driver = { .remove = prism54_remove, .suspend = prism54_suspend, .resume = prism54_resume, - /* .enable_wake ; we don't support this yet */ }; /****************************************************************************** @@ -167,8 +166,7 @@ prism54_probe(struct pci_dev *pdev, const struct pci_device_id *id) pci_set_master(pdev); /* enable MWI */ - if (!pci_set_mwi(pdev)) - printk(KERN_INFO "%s: pci_set_mwi(pdev) succeeded\n", DRV_NAME); + pci_try_set_mwi(pdev); /* setup the network device interface and its structure */ if (!(ndev = islpci_setup(pdev))) { diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index e3beb78..006054a 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -41,9 +41,7 @@ obj-$(CONFIG_ACPI) += pci-acpi.o # Cardbus & CompactPCI use setup-bus obj-$(CONFIG_HOTPLUG) += setup-bus.o -ifndef CONFIG_X86 -obj-y += syscall.o -endif +obj-$(CONFIG_PCI_SYSCALL) += syscall.o ifeq ($(CONFIG_PCI_DEBUG),y) EXTRA_CFLAGS += -DDEBUG diff --git a/drivers/pci/hotplug/acpiphp.h b/drivers/pci/hotplug/acpiphp.h index ddbadd95..f6cc0c5 100644 --- a/drivers/pci/hotplug/acpiphp.h +++ b/drivers/pci/hotplug/acpiphp.h @@ -211,6 +211,7 @@ typedef int (*acpiphp_callback)(struct acpiphp_slot *slot, void *data); extern int acpiphp_enable_slot (struct acpiphp_slot *slot); extern int acpiphp_disable_slot (struct acpiphp_slot *slot); +extern int acpiphp_eject_slot (struct acpiphp_slot *slot); extern u8 acpiphp_get_power_status (struct acpiphp_slot *slot); extern u8 acpiphp_get_attention_status (struct acpiphp_slot *slot); extern u8 acpiphp_get_latch_status (struct acpiphp_slot *slot); diff --git a/drivers/pci/hotplug/acpiphp_core.c b/drivers/pci/hotplug/acpiphp_core.c index fa5c019..a0ca63a 100644 --- a/drivers/pci/hotplug/acpiphp_core.c +++ b/drivers/pci/hotplug/acpiphp_core.c @@ -156,11 +156,15 @@ static int enable_slot(struct hotplug_slot *hotplug_slot) static int disable_slot(struct hotplug_slot *hotplug_slot) { struct slot *slot = hotplug_slot->private; + int retval; dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name); /* disable the specified slot */ - return acpiphp_disable_slot(slot->acpi_slot); + retval = acpiphp_disable_slot(slot->acpi_slot); + if (!retval) + retval = acpiphp_eject_slot(slot->acpi_slot); + return retval; } diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index 9ef4e98..1e125b5 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -1282,7 +1282,7 @@ static unsigned int get_slot_status(struct acpiphp_slot *slot) /** * acpiphp_eject_slot - physically eject the slot */ -static int acpiphp_eject_slot(struct acpiphp_slot *slot) +int acpiphp_eject_slot(struct acpiphp_slot *slot) { acpi_status status; struct acpiphp_func *func; @@ -1368,6 +1368,9 @@ static void program_hpp(struct pci_dev *dev, struct acpiphp_bridge *bridge) (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI))) return; + if ((dev->class >> 8) == PCI_CLASS_BRIDGE_HOST) + return; + pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, bridge->hpp.t0->cache_line_size); pci_write_config_byte(dev, PCI_LATENCY_TIMER, @@ -1502,6 +1505,37 @@ static void handle_bridge_insertion(acpi_handle handle, u32 type) * ACPI event handlers */ +static acpi_status +count_sub_bridges(acpi_handle handle, u32 lvl, void *context, void **rv) +{ + int *count = (int *)context; + struct acpiphp_bridge *bridge; + + bridge = acpiphp_handle_to_bridge(handle); + if (bridge) + (*count)++; + return AE_OK ; +} + +static acpi_status +check_sub_bridges(acpi_handle handle, u32 lvl, void *context, void **rv) +{ + struct acpiphp_bridge *bridge; + char objname[64]; + struct acpi_buffer buffer = { .length = sizeof(objname), + .pointer = objname }; + + bridge = acpiphp_handle_to_bridge(handle); + if (bridge) { + acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer); + dbg("%s: re-enumerating slots under %s\n", + __FUNCTION__, objname); + acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer); + acpiphp_check_bridge(bridge); + } + return AE_OK ; +} + /** * handle_hotplug_event_bridge - handle ACPI event on bridges * @@ -1519,6 +1553,7 @@ static void handle_hotplug_event_bridge(acpi_handle handle, u32 type, void *cont struct acpi_buffer buffer = { .length = sizeof(objname), .pointer = objname }; struct acpi_device *device; + int num_sub_bridges = 0; if (acpi_bus_get_device(handle, &device)) { /* This bridge must have just been physically inserted */ @@ -1527,7 +1562,12 @@ static void handle_hotplug_event_bridge(acpi_handle handle, u32 type, void *cont } bridge = acpiphp_handle_to_bridge(handle); - if (!bridge) { + if (type == ACPI_NOTIFY_BUS_CHECK) { + acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, ACPI_UINT32_MAX, + count_sub_bridges, &num_sub_bridges, NULL); + } + + if (!bridge && !num_sub_bridges) { err("cannot get bridge info\n"); return; } @@ -1538,7 +1578,14 @@ static void handle_hotplug_event_bridge(acpi_handle handle, u32 type, void *cont case ACPI_NOTIFY_BUS_CHECK: /* bus re-enumerate */ dbg("%s: Bus check notify on %s\n", __FUNCTION__, objname); - acpiphp_check_bridge(bridge); + if (bridge) { + dbg("%s: re-enumerating slots under %s\n", + __FUNCTION__, objname); + acpiphp_check_bridge(bridge); + } + if (num_sub_bridges) + acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, + ACPI_UINT32_MAX, check_sub_bridges, NULL, NULL); break; case ACPI_NOTIFY_DEVICE_CHECK: diff --git a/drivers/pci/hotplug/cpci_hotplug_core.c b/drivers/pci/hotplug/cpci_hotplug_core.c index 6845515..ed4d44e 100644 --- a/drivers/pci/hotplug/cpci_hotplug_core.c +++ b/drivers/pci/hotplug/cpci_hotplug_core.c @@ -35,6 +35,7 @@ #include <linux/smp_lock.h> #include <asm/atomic.h> #include <linux/delay.h> +#include <linux/kthread.h> #include "cpci_hotplug.h" #define DRIVER_AUTHOR "Scott Murray <scottm@somanetworks.com>" @@ -59,9 +60,8 @@ static int slots; static atomic_t extracting; int cpci_debug; static struct cpci_hp_controller *controller; -static struct semaphore event_semaphore; /* mutex for process loop (up if something to process) */ -static struct semaphore thread_exit; /* guard ensure thread has exited before calling it quits */ -static int thread_finished = 1; +static struct task_struct *cpci_thread; +static int thread_finished; static int enable_slot(struct hotplug_slot *slot); static int disable_slot(struct hotplug_slot *slot); @@ -357,9 +357,7 @@ cpci_hp_intr(int irq, void *data) controller->ops->disable_irq(); /* Trigger processing by the event thread */ - dbg("Signal event_semaphore"); - up(&event_semaphore); - dbg("exited cpci_hp_intr"); + wake_up_process(cpci_thread); return IRQ_HANDLED; } @@ -521,17 +519,12 @@ event_thread(void *data) { int rc; - lock_kernel(); - daemonize("cpci_hp_eventd"); - unlock_kernel(); - dbg("%s - event thread started", __FUNCTION__); while (1) { dbg("event thread sleeping"); - down_interruptible(&event_semaphore); - dbg("event thread woken, thread_finished = %d", - thread_finished); - if (thread_finished || signal_pending(current)) + set_current_state(TASK_INTERRUPTIBLE); + schedule(); + if (kthread_should_stop()) break; do { rc = check_slots(); @@ -541,18 +534,17 @@ event_thread(void *data) } else if (rc < 0) { dbg("%s - error checking slots", __FUNCTION__); thread_finished = 1; - break; + goto out; } - } while (atomic_read(&extracting) && !thread_finished); - if (thread_finished) + } while (atomic_read(&extracting) && !kthread_should_stop()); + if (kthread_should_stop()) break; /* Re-enable ENUM# interrupt */ dbg("%s - re-enabling irq", __FUNCTION__); controller->ops->enable_irq(); } - dbg("%s - event thread signals exit", __FUNCTION__); - up(&thread_exit); + out: return 0; } @@ -562,12 +554,8 @@ poll_thread(void *data) { int rc; - lock_kernel(); - daemonize("cpci_hp_polld"); - unlock_kernel(); - while (1) { - if (thread_finished || signal_pending(current)) + if (kthread_should_stop() || signal_pending(current)) break; if (controller->ops->query_enum()) { do { @@ -578,48 +566,36 @@ poll_thread(void *data) } else if (rc < 0) { dbg("%s - error checking slots", __FUNCTION__); thread_finished = 1; - break; + goto out; } - } while (atomic_read(&extracting) && !thread_finished); + } while (atomic_read(&extracting) && !kthread_should_stop()); } msleep(100); } - dbg("poll thread signals exit"); - up(&thread_exit); + out: return 0; } static int cpci_start_thread(void) { - int pid; - - /* initialize our semaphores */ - init_MUTEX_LOCKED(&event_semaphore); - init_MUTEX_LOCKED(&thread_exit); - thread_finished = 0; - if (controller->irq) - pid = kernel_thread(event_thread, NULL, 0); + cpci_thread = kthread_run(event_thread, NULL, "cpci_hp_eventd"); else - pid = kernel_thread(poll_thread, NULL, 0); - if (pid < 0) { + cpci_thread = kthread_run(poll_thread, NULL, "cpci_hp_polld"); + if (IS_ERR(cpci_thread)) { err("Can't start up our thread"); - return -1; + return PTR_ERR(cpci_thread); } - dbg("Our thread pid = %d", pid); + thread_finished = 0; return 0; } static void cpci_stop_thread(void) { + kthread_stop(cpci_thread); thread_finished = 1; - dbg("thread finish command given"); - if (controller->irq) - up(&event_semaphore); - dbg("wait for thread to exit"); - down(&thread_exit); } int diff --git a/drivers/pci/hotplug/cpci_hotplug_pci.c b/drivers/pci/hotplug/cpci_hotplug_pci.c index 7b1beaa..5e9be44 100644 --- a/drivers/pci/hotplug/cpci_hotplug_pci.c +++ b/drivers/pci/hotplug/cpci_hotplug_pci.c @@ -45,8 +45,6 @@ extern int cpci_debug; #define info(format, arg...) printk(KERN_INFO "%s: " format "\n", MY_NAME , ## arg) #define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n", MY_NAME , ## arg) -#define ROUND_UP(x, a) (((x) + (a) - 1) & ~((a) - 1)) - u8 cpci_get_attention_status(struct slot* slot) { diff --git a/drivers/pci/hotplug/cpqphp_core.c b/drivers/pci/hotplug/cpqphp_core.c index 5617cfd..d590a99 100644 --- a/drivers/pci/hotplug/cpqphp_core.c +++ b/drivers/pci/hotplug/cpqphp_core.c @@ -796,7 +796,6 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) u8 num_of_slots = 0; u8 hp_slot = 0; u8 device; - u8 rev; u8 bus_cap; u16 temp_word; u16 vendor_id; @@ -823,9 +822,8 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) } dbg("Vendor ID: %x\n", vendor_id); - rc = pci_read_config_byte(pdev, PCI_REVISION_ID, &rev); - dbg("revision: %d\n", rev); - if (rc || ((vendor_id == PCI_VENDOR_ID_COMPAQ) && (!rev))) { + dbg("revision: %d\n", pdev->revision); + if ((vendor_id == PCI_VENDOR_ID_COMPAQ) && (!pdev->revision)) { err(msg_HPC_rev_error); rc = -ENODEV; goto err_disable_device; @@ -836,7 +834,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) * For Intel, each SSID bit identifies a PHP capability. * Also Intel HPC's may have RID=0. */ - if ((rev > 2) || (vendor_id == PCI_VENDOR_ID_INTEL)) { + if ((pdev->revision > 2) || (vendor_id == PCI_VENDOR_ID_INTEL)) { // TODO: This code can be made to support non-Compaq or Intel subsystem IDs rc = pci_read_config_word(pdev, PCI_SUBSYSTEM_VENDOR_ID, &subsystem_vid); if (rc) { @@ -870,7 +868,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) switch (subsystem_vid) { case PCI_VENDOR_ID_COMPAQ: - if (rev >= 0x13) { /* CIOBX */ + if (pdev->revision >= 0x13) { /* CIOBX */ ctrl->push_flag = 1; ctrl->slot_switch_type = 1; ctrl->push_button = 1; @@ -1075,7 +1073,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) memcpy(ctrl->pci_bus, pdev->bus, sizeof(*ctrl->pci_bus)); ctrl->bus = pdev->bus->number; - ctrl->rev = rev; + ctrl->rev = pdev->revision; dbg("bus device function rev: %d %d %d %d\n", ctrl->bus, PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn), ctrl->rev); diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h index ccc5762..7959c22 100644 --- a/drivers/pci/hotplug/pciehp.h +++ b/drivers/pci/hotplug/pciehp.h @@ -103,6 +103,7 @@ struct controller { u8 cap_base; struct timer_list poll_timer; volatile int cmd_busy; + spinlock_t lock; }; #define INT_BUTTON_IGNORE 0 diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c index 7f22caa..98e541f 100644 --- a/drivers/pci/hotplug/pciehp_ctrl.c +++ b/drivers/pci/hotplug/pciehp_ctrl.c @@ -197,6 +197,12 @@ static void set_slot_off(struct controller *ctrl, struct slot * pslot) __FUNCTION__); return; } + /* + * After turning power off, we must wait for at least + * 1 second before taking any action that relies on + * power having been removed from the slot/adapter. + */ + msleep(1000); } } @@ -615,6 +621,12 @@ int pciehp_disable_slot(struct slot *p_slot) mutex_unlock(&p_slot->ctrl->crit_sect); return -EINVAL; } + /* + * After turning power off, we must wait for at least + * 1 second before taking any action that relies on + * power having been removed from the slot/adapter. + */ + msleep(1000); } ret = remove_board(p_slot); diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 9aac6a8..016eea9 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -275,11 +275,19 @@ static inline int pcie_wait_cmd(struct controller *ctrl) return retval; } -static int pcie_write_cmd(struct slot *slot, u16 cmd) +/** + * pcie_write_cmd - Issue controller command + * @slot: slot to which the command is issued + * @cmd: command value written to slot control register + * @mask: bitmask of slot control register to be modified + */ +static int pcie_write_cmd(struct slot *slot, u16 cmd, u16 mask) { struct controller *ctrl = slot->ctrl; int retval = 0; u16 slot_status; + u16 slot_ctrl; + unsigned long flags; DBG_ENTER_ROUTINE @@ -299,17 +307,29 @@ static int pcie_write_cmd(struct slot *slot, u16 cmd) __FUNCTION__); } - ctrl->cmd_busy = 1; - retval = pciehp_writew(ctrl, SLOTCTRL, (cmd | CMD_CMPL_INTR_ENABLE)); + spin_lock_irqsave(&ctrl->lock, flags); + retval = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl); if (retval) { - err("%s: Cannot write to SLOTCTRL register\n", __FUNCTION__); - goto out; + err("%s: Cannot read SLOTCTRL register\n", __FUNCTION__); + goto out_spin_unlock; } + slot_ctrl &= ~mask; + slot_ctrl |= ((cmd & mask) | CMD_CMPL_INTR_ENABLE); + + ctrl->cmd_busy = 1; + retval = pciehp_writew(ctrl, SLOTCTRL, slot_ctrl); + if (retval) + err("%s: Cannot write to SLOTCTRL register\n", __FUNCTION__); + + out_spin_unlock: + spin_unlock_irqrestore(&ctrl->lock, flags); + /* * Wait for command completion. */ - retval = pcie_wait_cmd(ctrl); + if (!retval) + retval = pcie_wait_cmd(ctrl); out: mutex_unlock(&ctrl->ctrl_lock); DBG_LEAVE_ROUTINE @@ -502,25 +522,20 @@ static int hpc_get_emi_status(struct slot *slot, u8 *status) static int hpc_toggle_emi(struct slot *slot) { - struct controller *ctrl = slot->ctrl; - u16 slot_cmd = 0; - u16 slot_ctrl; - int rc = 0; + u16 slot_cmd; + u16 cmd_mask; + int rc; DBG_ENTER_ROUTINE - rc = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl); - if (rc) { - err("%s : hp_register_read_word SLOT_CTRL failed\n", - __FUNCTION__); - return rc; - } - - slot_cmd = (slot_ctrl | EMI_CTRL); - if (!pciehp_poll_mode) + slot_cmd = EMI_CTRL; + cmd_mask = EMI_CTRL; + if (!pciehp_poll_mode) { slot_cmd = slot_cmd | HP_INTR_ENABLE; + cmd_mask = cmd_mask | HP_INTR_ENABLE; + } - pcie_write_cmd(slot, slot_cmd); + rc = pcie_write_cmd(slot, slot_cmd, cmd_mask); slot->last_emi_toggle = get_seconds(); DBG_LEAVE_ROUTINE return rc; @@ -529,35 +544,32 @@ static int hpc_toggle_emi(struct slot *slot) static int hpc_set_attention_status(struct slot *slot, u8 value) { struct controller *ctrl = slot->ctrl; - u16 slot_cmd = 0; - u16 slot_ctrl; - int rc = 0; + u16 slot_cmd; + u16 cmd_mask; + int rc; DBG_ENTER_ROUTINE - rc = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl); - if (rc) { - err("%s: Cannot read SLOTCTRL register\n", __FUNCTION__); - return rc; - } - + cmd_mask = ATTN_LED_CTRL; switch (value) { case 0 : /* turn off */ - slot_cmd = (slot_ctrl & ~ATTN_LED_CTRL) | 0x00C0; + slot_cmd = 0x00C0; break; case 1: /* turn on */ - slot_cmd = (slot_ctrl & ~ATTN_LED_CTRL) | 0x0040; + slot_cmd = 0x0040; break; case 2: /* turn blink */ - slot_cmd = (slot_ctrl & ~ATTN_LED_CTRL) | 0x0080; + slot_cmd = 0x0080; break; default: return -1; } - if (!pciehp_poll_mode) - slot_cmd = slot_cmd | HP_INTR_ENABLE; + if (!pciehp_poll_mode) { + slot_cmd = slot_cmd | HP_INTR_ENABLE; + cmd_mask = cmd_mask | HP_INTR_ENABLE; + } - pcie_write_cmd(slot, slot_cmd); + rc = pcie_write_cmd(slot, slot_cmd, cmd_mask); dbg("%s: SLOTCTRL %x write cmd %x\n", __FUNCTION__, ctrl->cap_base + SLOTCTRL, slot_cmd); @@ -570,21 +582,18 @@ static void hpc_set_green_led_on(struct slot *slot) { struct controller *ctrl = slot->ctrl; u16 slot_cmd; - u16 slot_ctrl; - int rc = 0; + u16 cmd_mask; DBG_ENTER_ROUTINE - rc = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl); - if (rc) { - err("%s: Cannot read SLOTCTRL register\n", __FUNCTION__); - return; + slot_cmd = 0x0100; + cmd_mask = PWR_LED_CTRL; + if (!pciehp_poll_mode) { + slot_cmd = slot_cmd | HP_INTR_ENABLE; + cmd_mask = cmd_mask | HP_INTR_ENABLE; } - slot_cmd = (slot_ctrl & ~PWR_LED_CTRL) | 0x0100; - if (!pciehp_poll_mode) - slot_cmd = slot_cmd | HP_INTR_ENABLE; - pcie_write_cmd(slot, slot_cmd); + pcie_write_cmd(slot, slot_cmd, cmd_mask); dbg("%s: SLOTCTRL %x write cmd %x\n", __FUNCTION__, ctrl->cap_base + SLOTCTRL, slot_cmd); @@ -596,22 +605,18 @@ static void hpc_set_green_led_off(struct slot *slot) { struct controller *ctrl = slot->ctrl; u16 slot_cmd; - u16 slot_ctrl; - int rc = 0; + u16 cmd_mask; DBG_ENTER_ROUTINE - rc = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl); - if (rc) { - err("%s: Cannot read SLOTCTRL register\n", __FUNCTION__); - return; + slot_cmd = 0x0300; + cmd_mask = PWR_LED_CTRL; + if (!pciehp_poll_mode) { + slot_cmd = slot_cmd | HP_INTR_ENABLE; + cmd_mask = cmd_mask | HP_INTR_ENABLE; } - slot_cmd = (slot_ctrl & ~PWR_LED_CTRL) | 0x0300; - - if (!pciehp_poll_mode) - slot_cmd = slot_cmd | HP_INTR_ENABLE; - pcie_write_cmd(slot, slot_cmd); + pcie_write_cmd(slot, slot_cmd, cmd_mask); dbg("%s: SLOTCTRL %x write cmd %x\n", __FUNCTION__, ctrl->cap_base + SLOTCTRL, slot_cmd); @@ -623,22 +628,18 @@ static void hpc_set_green_led_blink(struct slot *slot) { struct controller *ctrl = slot->ctrl; u16 slot_cmd; - u16 slot_ctrl; - int rc = 0; + u16 cmd_mask; DBG_ENTER_ROUTINE - rc = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl); - if (rc) { - err("%s: Cannot read SLOTCTRL register\n", __FUNCTION__); - return; + slot_cmd = 0x0200; + cmd_mask = PWR_LED_CTRL; + if (!pciehp_poll_mode) { + slot_cmd = slot_cmd | HP_INTR_ENABLE; + cmd_mask = cmd_mask | HP_INTR_ENABLE; } - slot_cmd = (slot_ctrl & ~PWR_LED_CTRL) | 0x0200; - - if (!pciehp_poll_mode) - slot_cmd = slot_cmd | HP_INTR_ENABLE; - pcie_write_cmd(slot, slot_cmd); + pcie_write_cmd(slot, slot_cmd, cmd_mask); dbg("%s: SLOTCTRL %x write cmd %x\n", __FUNCTION__, ctrl->cap_base + SLOTCTRL, slot_cmd); @@ -669,7 +670,8 @@ static int hpc_power_on_slot(struct slot * slot) { struct controller *ctrl = slot->ctrl; u16 slot_cmd; - u16 slot_ctrl, slot_status; + u16 cmd_mask; + u16 slot_status; int retval = 0; DBG_ENTER_ROUTINE @@ -692,23 +694,23 @@ static int hpc_power_on_slot(struct slot * slot) } } - retval = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl); - if (retval) { - err("%s: Cannot read SLOTCTRL register\n", __FUNCTION__); - return retval; - } - - slot_cmd = (slot_ctrl & ~PWR_CTRL) | POWER_ON; - + slot_cmd = POWER_ON; + cmd_mask = PWR_CTRL; /* Enable detection that we turned off at slot power-off time */ - if (!pciehp_poll_mode) + if (!pciehp_poll_mode) { slot_cmd = slot_cmd | PWR_FAULT_DETECT_ENABLE | MRL_DETECT_ENABLE | PRSN_DETECT_ENABLE | HP_INTR_ENABLE; + cmd_mask = cmd_mask | + PWR_FAULT_DETECT_ENABLE | + MRL_DETECT_ENABLE | + PRSN_DETECT_ENABLE | + HP_INTR_ENABLE; + } - retval = pcie_write_cmd(slot, slot_cmd); + retval = pcie_write_cmd(slot, slot_cmd, cmd_mask); if (retval) { err("%s: Write %x command failed!\n", __FUNCTION__, slot_cmd); @@ -726,21 +728,15 @@ static int hpc_power_off_slot(struct slot * slot) { struct controller *ctrl = slot->ctrl; u16 slot_cmd; - u16 slot_ctrl; + u16 cmd_mask; int retval = 0; DBG_ENTER_ROUTINE dbg("%s: slot->hp_slot %x\n", __FUNCTION__, slot->hp_slot); - retval = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl); - if (retval) { - err("%s: Cannot read SLOTCTRL register\n", __FUNCTION__); - return retval; - } - - slot_cmd = (slot_ctrl & ~PWR_CTRL) | POWER_OFF; - + slot_cmd = POWER_OFF; + cmd_mask = PWR_CTRL; /* * If we get MRL or presence detect interrupts now, the isr * will notice the sticky power-fault bit too and issue power @@ -748,14 +744,19 @@ static int hpc_power_off_slot(struct slot * slot) * of command completions, since the power-fault bit remains on * till the slot is powered on again. */ - if (!pciehp_poll_mode) + if (!pciehp_poll_mode) { slot_cmd = (slot_cmd & ~PWR_FAULT_DETECT_ENABLE & ~MRL_DETECT_ENABLE & ~PRSN_DETECT_ENABLE) | HP_INTR_ENABLE; + cmd_mask = cmd_mask | + PWR_FAULT_DETECT_ENABLE | + MRL_DETECT_ENABLE | + PRSN_DETECT_ENABLE | + HP_INTR_ENABLE; + } - retval = pcie_write_cmd(slot, slot_cmd); - + retval = pcie_write_cmd(slot, slot_cmd, cmd_mask); if (retval) { err("%s: Write command failed!\n", __FUNCTION__); return -1; @@ -775,6 +776,7 @@ static irqreturn_t pcie_isr(int irq, void *dev_id) u16 temp_word; int hp_slot = 0; /* only 1 slot per PCI Express port */ int rc = 0; + unsigned long flags; rc = pciehp_readw(ctrl, SLOTSTATUS, &slot_status); if (rc) { @@ -794,10 +796,12 @@ static irqreturn_t pcie_isr(int irq, void *dev_id) dbg("%s: intr_loc %x\n", __FUNCTION__, intr_loc); /* Mask Hot-plug Interrupt Enable */ if (!pciehp_poll_mode) { + spin_lock_irqsave(&ctrl->lock, flags); rc = pciehp_readw(ctrl, SLOTCTRL, &temp_word); if (rc) { err("%s: Cannot read SLOT_CTRL register\n", __FUNCTION__); + spin_unlock_irqrestore(&ctrl->lock, flags); return IRQ_NONE; } @@ -808,8 +812,10 @@ static irqreturn_t pcie_isr(int irq, void *dev_id) if (rc) { err("%s: Cannot write to SLOTCTRL register\n", __FUNCTION__); + spin_unlock_irqrestore(&ctrl->lock, flags); return IRQ_NONE; } + spin_unlock_irqrestore(&ctrl->lock, flags); rc = pciehp_readw(ctrl, SLOTSTATUS, &slot_status); if (rc) { @@ -859,10 +865,12 @@ static irqreturn_t pcie_isr(int irq, void *dev_id) } /* Unmask Hot-plug Interrupt Enable */ if (!pciehp_poll_mode) { + spin_lock_irqsave(&ctrl->lock, flags); rc = pciehp_readw(ctrl, SLOTCTRL, &temp_word); if (rc) { err("%s: Cannot read SLOTCTRL register\n", __FUNCTION__); + spin_unlock_irqrestore(&ctrl->lock, flags); return IRQ_NONE; } @@ -873,8 +881,10 @@ static irqreturn_t pcie_isr(int irq, void *dev_id) if (rc) { err("%s: Cannot write to SLOTCTRL register\n", __FUNCTION__); + spin_unlock_irqrestore(&ctrl->lock, flags); return IRQ_NONE; } + spin_unlock_irqrestore(&ctrl->lock, flags); rc = pciehp_readw(ctrl, SLOTSTATUS, &slot_status); if (rc) { @@ -1237,6 +1247,7 @@ int pcie_init(struct controller * ctrl, struct pcie_device *dev) mutex_init(&ctrl->crit_sect); mutex_init(&ctrl->ctrl_lock); + spin_lock_init(&ctrl->lock); /* setup wait queue */ init_waitqueue_head(&ctrl->queue); diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index b5ac810..c806249 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -55,8 +55,6 @@ acpi_query_osc ( status = acpi_evaluate_object(handle, "_OSC", &input, &output); if (ACPI_FAILURE (status)) { - printk(KERN_DEBUG - "Evaluate _OSC Set fails. Status = 0x%04x\n", status); *ret_status = status; return status; } @@ -124,11 +122,9 @@ acpi_run_osc ( in_params[3].buffer.pointer = (u8 *)context; status = acpi_evaluate_object(handle, "_OSC", &input, &output); - if (ACPI_FAILURE (status)) { - printk(KERN_DEBUG - "Evaluate _OSC Set fails. Status = 0x%04x\n", status); + if (ACPI_FAILURE (status)) return status; - } + out_obj = output.pointer; if (out_obj->type != ACPI_TYPE_BUFFER) { printk(KERN_DEBUG diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index 6543cbe..10dbdec 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -603,6 +603,11 @@ static struct bin_attribute pcie_config_attr = { .write = pci_write_config, }; +int __attribute__ ((weak)) pcibios_add_platform_entries(struct pci_dev *dev) +{ + return 0; +} + int __must_check pci_create_sysfs_dev_files (struct pci_dev *pdev) { struct bin_attribute *rom_attr = NULL; @@ -642,10 +647,14 @@ int __must_check pci_create_sysfs_dev_files (struct pci_dev *pdev) } } /* add platform-specific attributes */ - pcibios_add_platform_entries(pdev); + if (pcibios_add_platform_entries(pdev)) + goto err_rom_file; return 0; +err_rom_file: + if (pci_resource_len(pdev, PCI_ROM_RESOURCE)) + sysfs_remove_bin_file(&pdev->dev.kobj, rom_attr); err_rom: kfree(rom_attr); err_resource_files: diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index fd47ac0..03fd59e 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -406,6 +406,13 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state) if ((state == PCI_D1 || state == PCI_D2) && pci_no_d1d2(dev)) return 0; + /* find PCI PM capability in list */ + pm = pci_find_capability(dev, PCI_CAP_ID_PM); + + /* abort if the device doesn't support PM capabilities */ + if (!pm) + return -EIO; + /* Validate current state: * Can enter D0 from any state, but if we can only go deeper * to sleep if we're already in a low power state @@ -418,13 +425,6 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state) return 0; /* we're already there */ - /* find PCI PM capability in list */ - pm = pci_find_capability(dev, PCI_CAP_ID_PM); - - /* abort if the device doesn't support PM capabilities */ - if (!pm) - return -EIO; - pci_read_config_word(dev,pm + PCI_PM_PMC,&pmc); if ((pmc & PCI_PM_CAP_VER_MASK) > 3) { printk(KERN_DEBUG @@ -1186,6 +1186,11 @@ int pci_set_mwi(struct pci_dev *dev) return 0; } +int pci_try_set_mwi(struct pci_dev *dev) +{ + return 0; +} + void pci_clear_mwi(struct pci_dev *dev) { } @@ -1242,9 +1247,7 @@ pci_set_cacheline_size(struct pci_dev *dev) * pci_set_mwi - enables memory-write-invalidate PCI transaction * @dev: the PCI device for which MWI is enabled * - * Enables the Memory-Write-Invalidate transaction in %PCI_COMMAND, - * and then calls @pcibios_set_mwi to do the needed arch specific - * operations or a generic mwi-prep function. + * Enables the Memory-Write-Invalidate transaction in %PCI_COMMAND. * * RETURNS: An appropriate -ERRNO error value on error, or zero for success. */ @@ -1260,7 +1263,8 @@ pci_set_mwi(struct pci_dev *dev) pci_read_config_word(dev, PCI_COMMAND, &cmd); if (! (cmd & PCI_COMMAND_INVALIDATE)) { - pr_debug("PCI: Enabling Mem-Wr-Inval for device %s\n", pci_name(dev)); + pr_debug("PCI: Enabling Mem-Wr-Inval for device %s\n", + pci_name(dev)); cmd |= PCI_COMMAND_INVALIDATE; pci_write_config_word(dev, PCI_COMMAND, cmd); } @@ -1269,6 +1273,21 @@ pci_set_mwi(struct pci_dev *dev) } /** + * pci_try_set_mwi - enables memory-write-invalidate PCI transaction + * @dev: the PCI device for which MWI is enabled + * + * Enables the Memory-Write-Invalidate transaction in %PCI_COMMAND. + * Callers are not required to check the return value. + * + * RETURNS: An appropriate -ERRNO error value on error, or zero for success. + */ +int pci_try_set_mwi(struct pci_dev *dev) +{ + int rc = pci_set_mwi(dev); + return rc; +} + +/** * pci_clear_mwi - disables Memory-Write-Invalidate for device dev * @dev: the PCI device to disable * @@ -1375,6 +1394,164 @@ pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask) #endif /** + * pcix_get_max_mmrbc - get PCI-X maximum designed memory read byte count + * @dev: PCI device to query + * + * Returns mmrbc: maximum designed memory read count in bytes + * or appropriate error value. + */ +int pcix_get_max_mmrbc(struct pci_dev *dev) +{ + int err, cap; + u32 stat; + + cap = pci_find_capability(dev, PCI_CAP_ID_PCIX); + if (!cap) + return -EINVAL; + + err = pci_read_config_dword(dev, cap + PCI_X_STATUS, &stat); + if (err) + return -EINVAL; + + return (stat & PCI_X_STATUS_MAX_READ) >> 12; +} +EXPORT_SYMBOL(pcix_get_max_mmrbc); + +/** + * pcix_get_mmrbc - get PCI-X maximum memory read byte count + * @dev: PCI device to query + * + * Returns mmrbc: maximum memory read count in bytes + * or appropriate error value. + */ +int pcix_get_mmrbc(struct pci_dev *dev) +{ + int ret, cap; + u32 cmd; + + cap = pci_find_capability(dev, PCI_CAP_ID_PCIX); + if (!cap) + return -EINVAL; + + ret = pci_read_config_dword(dev, cap + PCI_X_CMD, &cmd); + if (!ret) + ret = 512 << ((cmd & PCI_X_CMD_MAX_READ) >> 2); + + return ret; +} +EXPORT_SYMBOL(pcix_get_mmrbc); + +/** + * pcix_set_mmrbc - set PCI-X maximum memory read byte count + * @dev: PCI device to query + * @mmrbc: maximum memory read count in bytes + * valid values are 512, 1024, 2048, 4096 + * + * If possible sets maximum memory read byte count, some bridges have erratas + * that prevent this. + */ +int pcix_set_mmrbc(struct pci_dev *dev, int mmrbc) +{ + int cap, err = -EINVAL; + u32 stat, cmd, v, o; + + if (mmrbc < 512 || mmrbc > 4096 || (mmrbc & (mmrbc-1))) + goto out; + + v = ffs(mmrbc) - 10; + + cap = pci_find_capability(dev, PCI_CAP_ID_PCIX); + if (!cap) + goto out; + + err = pci_read_config_dword(dev, cap + PCI_X_STATUS, &stat); + if (err) + goto out; + + if (v > (stat & PCI_X_STATUS_MAX_READ) >> 21) + return -E2BIG; + + err = pci_read_config_dword(dev, cap + PCI_X_CMD, &cmd); + if (err) + goto out; + + o = (cmd & PCI_X_CMD_MAX_READ) >> 2; + if (o != v) { + if (v > o && dev->bus && + (dev->bus->bus_flags & PCI_BUS_FLAGS_NO_MMRBC)) + return -EIO; + + cmd &= ~PCI_X_CMD_MAX_READ; + cmd |= v << 2; + err = pci_write_config_dword(dev, cap + PCI_X_CMD, cmd); + } +out: + return err; +} +EXPORT_SYMBOL(pcix_set_mmrbc); + +/** + * pcie_get_readrq - get PCI Express read request size + * @dev: PCI device to query + * + * Returns maximum memory read request in bytes + * or appropriate error value. + */ +int pcie_get_readrq(struct pci_dev *dev) +{ + int ret, cap; + u16 ctl; + + cap = pci_find_capability(dev, PCI_CAP_ID_EXP); + if (!cap) + return -EINVAL; + + ret = pci_read_config_word(dev, cap + PCI_EXP_DEVCTL, &ctl); + if (!ret) + ret = 128 << ((ctl & PCI_EXP_DEVCTL_READRQ) >> 12); + + return ret; +} +EXPORT_SYMBOL(pcie_get_readrq); + +/** + * pcie_set_readrq - set PCI Express maximum memory read request + * @dev: PCI device to query + * @count: maximum memory read count in bytes + * valid values are 128, 256, 512, 1024, 2048, 4096 + * + * If possible sets maximum read byte count + */ +int pcie_set_readrq(struct pci_dev *dev, int rq) +{ + int cap, err = -EINVAL; + u16 ctl, v; + + if (rq < 128 || rq > 4096 || (rq & (rq-1))) + goto out; + + v = (ffs(rq) - 8) << 12; + + cap = pci_find_capability(dev, PCI_CAP_ID_EXP); + if (!cap) + goto out; + + err = pci_read_config_word(dev, cap + PCI_EXP_DEVCTL, &ctl); + if (err) + goto out; + + if ((ctl & PCI_EXP_DEVCTL_READRQ) != v) { + ctl &= ~PCI_EXP_DEVCTL_READRQ; + ctl |= v; + err = pci_write_config_dword(dev, cap + PCI_EXP_DEVCTL, ctl); + } + +out: + return err; +} +EXPORT_SYMBOL(pcie_set_readrq); + +/** * pci_select_bars - Make BAR mask from the type of resource * @dev: the PCI device for which BAR mask is made * @flags: resource type mask to be selected @@ -1442,6 +1619,7 @@ EXPORT_SYMBOL(pci_release_selected_regions); EXPORT_SYMBOL(pci_request_selected_regions); EXPORT_SYMBOL(pci_set_master); EXPORT_SYMBOL(pci_set_mwi); +EXPORT_SYMBOL(pci_try_set_mwi); EXPORT_SYMBOL(pci_clear_mwi); EXPORT_SYMBOL_GPL(pci_intx); EXPORT_SYMBOL(pci_set_dma_mask); diff --git a/drivers/pci/pcie/aer/Kconfig b/drivers/pci/pcie/aer/Kconfig index 3f37a60..c3bde58 100644 --- a/drivers/pci/pcie/aer/Kconfig +++ b/drivers/pci/pcie/aer/Kconfig @@ -4,7 +4,7 @@ config PCIEAER boolean "Root Port Advanced Error Reporting support" - depends on PCIEPORTBUS && ACPI + depends on PCIEPORTBUS default y help This enables PCI Express Root Port Advanced Error Reporting diff --git a/drivers/pci/pcie/aer/Makefile b/drivers/pci/pcie/aer/Makefile index 15a4f40..8da3bd8 100644 --- a/drivers/pci/pcie/aer/Makefile +++ b/drivers/pci/pcie/aer/Makefile @@ -4,5 +4,6 @@ obj-$(CONFIG_PCIEAER) += aerdriver.o -aerdriver-objs := aerdrv_errprint.o aerdrv_core.o aerdrv.o aerdrv_acpi.o +aerdriver-objs := aerdrv_errprint.o aerdrv_core.o aerdrv.o +aerdriver-$(CONFIG_ACPI) += aerdrv_acpi.o diff --git a/drivers/pci/pcie/aer/aerdrv.c b/drivers/pci/pcie/aer/aerdrv.c index db6ad8e..6846fb4 100644 --- a/drivers/pci/pcie/aer/aerdrv.c +++ b/drivers/pci/pcie/aer/aerdrv.c @@ -157,7 +157,7 @@ static struct aer_rpc* aer_alloc_rpc(struct pcie_device *dev) * Initialize Root lock access, e_lock, to Root Error Status Reg, * Root Error ID Reg, and Root error producer/consumer index. */ - rpc->e_lock = SPIN_LOCK_UNLOCKED; + spin_lock_init(&rpc->e_lock); rpc->rpd = dev; INIT_WORK(&rpc->dpc_handler, aer_isr); diff --git a/drivers/pci/pcie/aer/aerdrv.h b/drivers/pci/pcie/aer/aerdrv.h index 5cca394..c7ad68b 100644 --- a/drivers/pci/pcie/aer/aerdrv.h +++ b/drivers/pci/pcie/aer/aerdrv.h @@ -19,10 +19,6 @@ #define AER_ERROR_MASK 0x001fffff #define AER_ERROR(d) (d & AER_ERROR_MASK) -#define OSC_METHOD_RUN_SUCCESS 0 -#define OSC_METHOD_NOT_SUPPORTED 1 -#define OSC_METHOD_RUN_FAILURE 2 - /* Root Error Status Register Bits */ #define ROOT_ERR_STATUS_MASKS 0x0f @@ -121,6 +117,14 @@ extern void aer_delete_rootport(struct aer_rpc *rpc); extern int aer_init(struct pcie_device *dev); extern void aer_isr(struct work_struct *work); extern void aer_print_error(struct pci_dev *dev, struct aer_err_info *info); -extern int aer_osc_setup(struct pci_dev *dev); + +#ifdef CONFIG_ACPI +extern int aer_osc_setup(struct pcie_device *pciedev); +#else +static inline int aer_osc_setup(struct pcie_device *pciedev) +{ + return 0; +} +#endif #endif //_AERDRV_H_ diff --git a/drivers/pci/pcie/aer/aerdrv_acpi.c b/drivers/pci/pcie/aer/aerdrv_acpi.c index fa68e89..1a1eb45 100644 --- a/drivers/pci/pcie/aer/aerdrv_acpi.c +++ b/drivers/pci/pcie/aer/aerdrv_acpi.c @@ -20,19 +20,18 @@ /** * aer_osc_setup - run ACPI _OSC method + * @pciedev: pcie_device which AER is being enabled on * - * Return: - * Zero if success. Nonzero for otherwise. + * @return: Zero on success. Nonzero otherwise. * * Invoked when PCIE bus loads AER service driver. To avoid conflict with * BIOS AER support requires BIOS to yield AER control to OS native driver. **/ -int aer_osc_setup(struct pci_dev *dev) +int aer_osc_setup(struct pcie_device *pciedev) { - int retval = OSC_METHOD_RUN_SUCCESS; - acpi_status status; - acpi_handle handle = DEVICE_ACPI_HANDLE(&dev->dev); - struct pci_dev *pdev = dev; + acpi_status status = AE_NOT_FOUND; + struct pci_dev *pdev = pciedev->port; + acpi_handle handle = DEVICE_ACPI_HANDLE(&pdev->dev); struct pci_bus *parent; while (!handle) { @@ -50,19 +49,20 @@ int aer_osc_setup(struct pci_dev *dev) pdev = parent->self; } - if (!handle) - return OSC_METHOD_NOT_SUPPORTED; + if (handle) { + pci_osc_support_set(OSC_EXT_PCI_CONFIG_SUPPORT); + status = pci_osc_control_set(handle, + OSC_PCI_EXPRESS_AER_CONTROL | + OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL); + } - pci_osc_support_set(OSC_EXT_PCI_CONFIG_SUPPORT); - status = pci_osc_control_set(handle, OSC_PCI_EXPRESS_AER_CONTROL | - OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL); if (ACPI_FAILURE(status)) { - if (status == AE_SUPPORT) - retval = OSC_METHOD_NOT_SUPPORTED; - else - retval = OSC_METHOD_RUN_FAILURE; + printk(KERN_DEBUG "AER service couldn't init device %s - %s\n", + pciedev->device.bus_id, + (status == AE_SUPPORT || status == AE_NOT_FOUND) ? + "no _OSC support" : "Run ACPI _OSC fails"); + return -1; } - return retval; + return 0; } - diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c index 08e1303..92a8469 100644 --- a/drivers/pci/pcie/aer/aerdrv_core.c +++ b/drivers/pci/pcie/aer/aerdrv_core.c @@ -22,8 +22,6 @@ #include <linux/errno.h> #include <linux/pm.h> #include <linux/suspend.h> -#include <linux/acpi.h> -#include <linux/pci-acpi.h> #include <linux/delay.h> #include "aerdrv.h" @@ -119,6 +117,21 @@ int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev) return 0; } +int pci_cleanup_aer_correct_error_status(struct pci_dev *dev) +{ + int pos; + u32 status; + + pos = pci_find_aer_capability(dev); + if (!pos) + return -EIO; + + pci_read_config_dword(dev, pos + PCI_ERR_COR_STATUS, &status); + pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS, status); + + return 0; +} + static int find_device_iter(struct device *device, void *data) { struct pci_dev *dev; @@ -733,20 +746,8 @@ void aer_delete_rootport(struct aer_rpc *rpc) **/ int aer_init(struct pcie_device *dev) { - int status; - - /* Run _OSC Method */ - status = aer_osc_setup(dev->port); - - if(status != OSC_METHOD_RUN_SUCCESS) { - printk(KERN_DEBUG "%s: AER service init fails - %s\n", - __FUNCTION__, - (status == OSC_METHOD_NOT_SUPPORTED) ? - "No ACPI _OSC support" : "Run ACPI _OSC fails"); - - if (!forceload) - return status; - } + if (aer_osc_setup(dev) && !forceload) + return -ENXIO; return AER_SUCCESS; } @@ -755,4 +756,5 @@ EXPORT_SYMBOL_GPL(pci_find_aer_capability); EXPORT_SYMBOL_GPL(pci_enable_pcie_error_reporting); EXPORT_SYMBOL_GPL(pci_disable_pcie_error_reporting); EXPORT_SYMBOL_GPL(pci_cleanup_aer_uncorrect_error_status); +EXPORT_SYMBOL_GPL(pci_cleanup_aer_correct_error_status); diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 08783bd..a7bce75 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -654,7 +654,7 @@ int pci_scan_bridge(struct pci_bus *bus, struct pci_dev * dev, int max, int pass pcibios_assign_all_busses() ? " " : " (try 'pci=assign-busses')"); printk(KERN_WARNING "Please report the result to " - "linux-kernel to fix this permanently\n"); + "<bk@suse.de> to fix this permanently\n"); } bus = bus->parent; } @@ -700,6 +700,7 @@ static int pci_setup_device(struct pci_dev * dev) dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)); pci_read_config_dword(dev, PCI_CLASS_REVISION, &class); + dev->revision = class & 0xff; class >>= 8; /* upper 3 bytes */ dev->class = class; class >>= 8; diff --git a/drivers/pci/proc.c b/drivers/pci/proc.c index 0425a7b..cfa0dfe 100644 --- a/drivers/pci/proc.c +++ b/drivers/pci/proc.c @@ -480,7 +480,6 @@ static int __init pci_proc_init(void) __initcall(pci_proc_init); #ifdef CONFIG_HOTPLUG -EXPORT_SYMBOL(pci_proc_attach_device); EXPORT_SYMBOL(pci_proc_detach_bus); #endif diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 01d8f8a..c559085 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -587,10 +587,7 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_v */ static void __devinit quirk_amd_ioapic(struct pci_dev *dev) { - u8 rev; - - pci_read_config_byte(dev, PCI_REVISION_ID, &rev); - if (rev >= 0x02) { + if (dev->revision >= 0x02) { printk(KERN_WARNING "I/O APIC: AMD Erratum #22 may be present. In the event of instability try\n"); printk(KERN_WARNING " : booting with the \"noapic\" option.\n"); } @@ -610,13 +607,12 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_ANY_ID, quirk_ioapic_rmw ); #define AMD8131_NIOAMODE_BIT 0 static void quirk_amd_8131_ioapic(struct pci_dev *dev) { - unsigned char revid, tmp; + unsigned char tmp; if (nr_ioapics == 0) return; - pci_read_config_byte(dev, PCI_REVISION_ID, &revid); - if (revid == AMD8131_revA0 || revid == AMD8131_revB0) { + if (dev->revision == AMD8131_revA0 || dev->revision == AMD8131_revB0) { printk(KERN_INFO "Fixing up AMD8131 IOAPIC mode\n"); pci_read_config_byte( dev, AMD8131_MISC, &tmp); tmp &= ~(1 << AMD8131_NIOAMODE_BIT); @@ -627,6 +623,22 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_amd_8131_ioapic); #endif /* CONFIG_X86_IO_APIC */ +/* + * Some settings of MMRBC can lead to data corruption so block changes. + * See AMD 8131 HyperTransport PCI-X Tunnel Revision Guide + */ +static void __init quirk_amd_8131_mmrbc(struct pci_dev *dev) +{ + unsigned char revid; + + pci_read_config_byte(dev, PCI_REVISION_ID, &revid); + if (dev->subordinate && revid <= 0x12) { + printk(KERN_INFO "AMD8131 rev %x detected, disabling PCI-X " + "MMRBC\n", revid); + dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MMRBC; + } +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_amd_8131_mmrbc); /* * FIXME: it is questionable that quirk_via_acpi @@ -843,10 +855,8 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_PCI_MASTER, qu static void quirk_disable_pxb(struct pci_dev *pdev) { u16 config; - u8 rev; - pci_read_config_byte(pdev, PCI_REVISION_ID, &rev); - if (rev != 0x04) /* Only C0 requires this */ + if (pdev->revision != 0x04) /* Only C0 requires this */ return; pci_read_config_word(pdev, 0x40, &config); if (config & (1<<6)) { diff --git a/drivers/pci/search.c b/drivers/pci/search.c index c132324..9f7090f 100644 --- a/drivers/pci/search.c +++ b/drivers/pci/search.c @@ -139,12 +139,14 @@ struct pci_dev * pci_get_slot(struct pci_bus *bus, unsigned int devfn) } /** - * pci_get_bus_and_slot - locate PCI device from a given PCI slot + * pci_get_bus_and_slot - locate PCI device from a given PCI bus & slot * @bus: number of PCI bus on which desired PCI device resides * @devfn: encodes number of PCI slot in which the desired PCI * device resides and the logical device number within that slot * in case of multi-function devices. * + * Note: the bus/slot search is limited to PCI domain (segment) 0. + * * Given a PCI bus and slot/function number, the desired PCI device * is located in system global list of PCI devices. If the device * is found, a pointer to its data structure is returned. If no @@ -157,7 +159,8 @@ struct pci_dev * pci_get_bus_and_slot(unsigned int bus, unsigned int devfn) struct pci_dev *dev = NULL; while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { - if (dev->bus->number == bus && dev->devfn == devfn) + if (pci_domain_nr(dev->bus) == 0 && + (dev->bus->number == bus && dev->devfn == devfn)) return dev; } return NULL; diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index 5ec297d..5e5191e 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -34,8 +34,6 @@ #define DBG(x...) #endif -#define ROUND_UP(x, a) (((x) + (a) - 1) & ~((a) - 1)) - static void pbus_assign_resources_sorted(struct pci_bus *bus) { struct pci_dev *dev; @@ -310,7 +308,7 @@ static void pbus_size_io(struct pci_bus *bus) #if defined(CONFIG_ISA) || defined(CONFIG_EISA) size = (size & 0xff) + ((size & ~0xffUL) << 2); #endif - size = ROUND_UP(size + size1, 4096); + size = ALIGN(size + size1, 4096); if (!size) { b_res->flags = 0; return; @@ -378,11 +376,11 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask, unsigned long if (!align) min_align = align1; - else if (ROUND_UP(align + min_align, min_align) < align1) + else if (ALIGN(align + min_align, min_align) < align1) min_align = align1 >> 1; align += aligns[order]; } - size = ROUND_UP(size, min_align); + size = ALIGN(size, min_align); if (!size) { b_res->flags = 0; return 1; diff --git a/drivers/pci/syscall.c b/drivers/pci/syscall.c index 9d37fec..2ac050d 100644 --- a/drivers/pci/syscall.c +++ b/drivers/pci/syscall.c @@ -23,14 +23,14 @@ sys_pciconfig_read(unsigned long bus, unsigned long dfn, u8 byte; u16 word; u32 dword; - long err, cfg_ret; + long err; + long cfg_ret; - err = -EPERM; if (!capable(CAP_SYS_ADMIN)) - goto error; + return -EPERM; err = -ENODEV; - dev = pci_find_slot(bus, dfn); + dev = pci_get_bus_and_slot(bus, dfn); if (!dev) goto error; @@ -66,7 +66,8 @@ sys_pciconfig_read(unsigned long bus, unsigned long dfn, case 4: err = put_user(dword, (unsigned int __user *)buf); break; - }; + } + pci_dev_put(dev); return err; error: @@ -83,7 +84,8 @@ error: case 4: put_user(-1, (unsigned int __user *)buf); break; - }; + } + pci_dev_put(dev); return err; } @@ -101,7 +103,7 @@ sys_pciconfig_write(unsigned long bus, unsigned long dfn, if (!capable(CAP_SYS_ADMIN)) return -EPERM; - dev = pci_find_slot(bus, dfn); + dev = pci_get_bus_and_slot(bus, dfn); if (!dev) return -ENODEV; @@ -137,8 +139,8 @@ sys_pciconfig_write(unsigned long bus, unsigned long dfn, default: err = -EINVAL; break; - }; + } unlock_kernel(); - + pci_dev_put(dev); return err; } diff --git a/drivers/scsi/aic94xx/aic94xx_init.c b/drivers/scsi/aic94xx/aic94xx_init.c index 27852b4..1c0d757 100644 --- a/drivers/scsi/aic94xx/aic94xx_init.c +++ b/drivers/scsi/aic94xx/aic94xx_init.c @@ -223,13 +223,8 @@ static int __devinit asd_common_setup(struct asd_ha_struct *asd_ha) { int err, i; - err = pci_read_config_byte(asd_ha->pcidev, PCI_REVISION_ID, - &asd_ha->revision_id); - if (err) { - asd_printk("couldn't read REVISION ID register of %s\n", - pci_name(asd_ha->pcidev)); - goto Err; - } + asd_ha->revision_id = asd_ha->pcidev->revision; + err = -ENODEV; if (asd_ha->revision_id < AIC9410_DEV_REV_B0) { asd_printk("%s is revision %s (%X), which is not supported\n", diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index 4a3083e..b3bf77f 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -5373,18 +5373,12 @@ static const u16 ipr_blocked_processors[] = { **/ static int ipr_invalid_adapter(struct ipr_ioa_cfg *ioa_cfg) { - u8 rev_id; int i; - if (ioa_cfg->type == 0x5702) { - if (pci_read_config_byte(ioa_cfg->pdev, PCI_REVISION_ID, - &rev_id) == PCIBIOS_SUCCESSFUL) { - if (rev_id < 4) { - for (i = 0; i < ARRAY_SIZE(ipr_blocked_processors); i++){ - if (__is_processor(ipr_blocked_processors[i])) - return 1; - } - } + if ((ioa_cfg->type == 0x5702) && (ioa_cfg->pdev->revision < 4)) { + for (i = 0; i < ARRAY_SIZE(ipr_blocked_processors); i++){ + if (__is_processor(ipr_blocked_processors[i])) + return 1; } } return 0; @@ -7541,13 +7535,7 @@ static int __devinit ipr_probe_ioa(struct pci_dev *pdev, else ioa_cfg->transop_timeout = IPR_OPERATIONAL_TIMEOUT; - rc = pci_read_config_byte(pdev, PCI_REVISION_ID, &ioa_cfg->revid); - - if (rc != PCIBIOS_SUCCESSFUL) { - dev_err(&pdev->dev, "Failed to read PCI revision ID\n"); - rc = -EIO; - goto out_scsi_host_put; - } + ioa_cfg->revid = pdev->revision; ipr_regs_pci = pci_resource_start(pdev, 0); diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c index 8b704f7..40f148e 100644 --- a/drivers/scsi/ips.c +++ b/drivers/scsi/ips.c @@ -7148,7 +7148,6 @@ ips_init_phase1(struct pci_dev *pci_dev, int *indexPtr) uint32_t mem_addr; uint32_t io_len; uint32_t mem_len; - uint8_t revision_id; uint8_t bus; uint8_t func; uint8_t irq; @@ -7227,12 +7226,6 @@ ips_init_phase1(struct pci_dev *pci_dev, int *indexPtr) } } - /* get the revision ID */ - if (pci_read_config_byte(pci_dev, PCI_REVISION_ID, &revision_id)) { - IPS_PRINTK(KERN_WARNING, pci_dev, "Can't get revision id.\n"); - return -1; - } - subdevice_id = pci_dev->subsystem_device; /* found a controller */ @@ -7258,7 +7251,7 @@ ips_init_phase1(struct pci_dev *pci_dev, int *indexPtr) ha->mem_ptr = mem_ptr; ha->ioremap_ptr = ioremap_ptr; ha->host_num = (uint32_t) index; - ha->revision_id = revision_id; + ha->revision_id = pci_dev->revision; ha->slot_num = PCI_SLOT(pci_dev->devfn); ha->device_id = pci_dev->device; ha->subdevice_id = subdevice_id; diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index dcb4ba0..955b2e4 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -1578,10 +1578,7 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) INIT_LIST_HEAD(&phba->fc_nodes); pci_set_master(pdev); - retval = pci_set_mwi(pdev); - if (retval) - dev_printk(KERN_WARNING, &pdev->dev, - "Warning: pci_set_mwi returned %d\n", retval); + pci_try_set_mwi(pdev); if (pci_set_dma_mask(phba->pcidev, DMA_64BIT_MASK) != 0) if (pci_set_dma_mask(phba->pcidev, DMA_32BIT_MASK) != 0) diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c index f6f561d..3e9765f 100644 --- a/drivers/scsi/nsp32.c +++ b/drivers/scsi/nsp32.c @@ -3487,15 +3487,6 @@ static int nsp32_resume(struct pci_dev *pdev) return 0; } -/* Enable wake event */ -static int nsp32_enable_wake(struct pci_dev *pdev, pci_power_t state, int enable) -{ - struct Scsi_Host *host = pci_get_drvdata(pdev); - - nsp32_msg(KERN_INFO, "pci-enable_wake: stub, pdev=0x%p, enable=%d, slot=%s, host=0x%p", pdev, enable, pci_name(pdev), host); - - return 0; -} #endif /************************************************************************ @@ -3571,7 +3562,6 @@ static struct pci_driver nsp32_driver = { #ifdef CONFIG_PM .suspend = nsp32_suspend, .resume = nsp32_resume, - .enable_wake = nsp32_enable_wake, #endif }; diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 2a45aec..cf94f86 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -296,7 +296,7 @@ qla24xx_pci_config(scsi_qla_host_t *ha) d &= ~PCI_ROM_ADDRESS_ENABLE; pci_write_config_dword(ha->pdev, PCI_ROM_ADDRESS, d); - pci_read_config_word(ha->pdev, PCI_REVISION_ID, &ha->chip_revision); + ha->chip_revision = ha->pdev->revision; /* Get PCI bus information. */ spin_lock_irqsave(&ha->hardware_lock, flags); diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c index 81792e6..6767ee3 100644 --- a/drivers/serial/jsm/jsm_driver.c +++ b/drivers/serial/jsm/jsm_driver.c @@ -88,7 +88,7 @@ static int jsm_probe_one(struct pci_dev *pdev, const struct pci_device_id *ent) spin_lock_init(&brd->bd_intr_lock); /* store which revision we have */ - pci_read_config_byte(pdev, PCI_REVISION_ID, &brd->rev); + brd->rev = pdev->revision; brd->irq = pdev->irq; diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c index d975ecf..00fda33 100644 --- a/drivers/usb/gadget/net2280.c +++ b/drivers/usb/gadget/net2280.c @@ -2964,7 +2964,7 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id) , &dev->pci->pcimstctl); /* erratum 0115 shouldn't appear: Linux inits PCI_LATENCY_TIMER */ pci_set_master (pdev); - pci_set_mwi (pdev); + pci_try_set_mwi (pdev); /* ... also flushes any posted pci writes */ dev->chiprev = get_idx_reg (dev->regs, REG_CHIPREV) & 0xffff; diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 12edc72..966965f 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -149,8 +149,7 @@ static int ehci_pci_setup(struct usb_hcd *hcd) * fixed in newer silicon. */ case 0x0068: - pci_read_config_dword(pdev, PCI_REVISION_ID, &temp); - if ((temp & 0xff) < 0xa4) + if (pdev->revision < 0xa4) ehci->no_selective_suspend = 1; break; } diff --git a/drivers/video/kyro/STG4000InitDevice.c b/drivers/video/kyro/STG4000InitDevice.c index ab5285a..1d3f2080 100644 --- a/drivers/video/kyro/STG4000InitDevice.c +++ b/drivers/video/kyro/STG4000InitDevice.c @@ -247,7 +247,6 @@ int SetCoreClockPLL(volatile STG4000REG __iomem *pSTGReg, struct pci_dev *pDev) u32 ulCoreClock; u32 tmp; u32 ulChipSpeed; - u8 rev; STG_WRITE_REG(IntMask, 0xFFFF); @@ -276,9 +275,9 @@ int SetCoreClockPLL(volatile STG4000REG __iomem *pSTGReg, struct pci_dev *pDev) PMX2_SOFTRESET_ROM_RST); pci_read_config_word(pDev, PCI_CONFIG_SUBSYS_ID, &sub); - pci_read_config_byte(pDev, PCI_REVISION_ID, &rev); - ulChipSpeed = InitSDRAMRegisters(pSTGReg, (u32)sub, (u32)rev); + ulChipSpeed = InitSDRAMRegisters(pSTGReg, (u32)sub, + (u32)pDev->revision); if (ulChipSpeed == 0) return -EINVAL; diff --git a/drivers/video/matrox/matroxfb_base.c b/drivers/video/matrox/matroxfb_base.c index c8559a7..886e475 100644 --- a/drivers/video/matrox/matroxfb_base.c +++ b/drivers/video/matrox/matroxfb_base.c @@ -1994,7 +1994,6 @@ static void matroxfb_unregister_device(struct matrox_fb_info* minfo) { static int matroxfb_probe(struct pci_dev* pdev, const struct pci_device_id* dummy) { struct board* b; - u_int8_t rev; u_int16_t svid; u_int16_t sid; struct matrox_fb_info* minfo; @@ -2005,11 +2004,10 @@ static int matroxfb_probe(struct pci_dev* pdev, const struct pci_device_id* dumm #endif DBG(__FUNCTION__) - pci_read_config_byte(pdev, PCI_REVISION_ID, &rev); svid = pdev->subsystem_vendor; sid = pdev->subsystem_device; for (b = dev_list; b->vendor; b++) { - if ((b->vendor != pdev->vendor) || (b->device != pdev->device) || (b->rev < rev)) continue; + if ((b->vendor != pdev->vendor) || (b->device != pdev->device) || (b->rev < pdev->revision)) continue; if (b->svid) if ((b->svid != svid) || (b->sid != sid)) continue; break; diff --git a/drivers/video/sis/sis_main.c b/drivers/video/sis/sis_main.c index a30e1e1..93d07ef 100644 --- a/drivers/video/sis/sis_main.c +++ b/drivers/video/sis/sis_main.c @@ -5789,7 +5789,7 @@ sisfb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) ivideo->warncount = 0; ivideo->chip_id = pdev->device; ivideo->chip_vendor = pdev->vendor; - pci_read_config_byte(pdev, PCI_REVISION_ID, &ivideo->revision_id); + ivideo->revision_id = pdev->revision; ivideo->SiS_Pr.ChipRevision = ivideo->revision_id; pci_read_config_word(pdev, PCI_COMMAND, ®16); ivideo->sisvga_enabled = reg16 & 0x01; diff --git a/drivers/video/sstfb.c b/drivers/video/sstfb.c index 62fa550..5eff28ce 100644 --- a/drivers/video/sstfb.c +++ b/drivers/video/sstfb.c @@ -1348,7 +1348,7 @@ static int __devinit sstfb_probe(struct pci_dev *pdev, f_ddprintk("found device : %s\n", spec->name); par->dev = pdev; - pci_read_config_byte(pdev, PCI_REVISION_ID, &par->revision); + par->revision = pdev->revision; fix->mmio_start = pci_resource_start(pdev,0); fix->mmio_len = 0x400000; diff --git a/drivers/video/tgafb.c b/drivers/video/tgafb.c index f0fde6e..5c0dab6 100644 --- a/drivers/video/tgafb.c +++ b/drivers/video/tgafb.c @@ -1625,8 +1625,7 @@ tgafb_register(struct device *dev) par->tga_regs_base = mem_base + TGA_REGS_OFFSET; par->tga_type = tga_type; if (tga_bus_pci) - pci_read_config_byte(to_pci_dev(dev), PCI_REVISION_ID, - &par->tga_chip_rev); + par->tga_chip_rev = (to_pci_dev(dev))->revision; if (tga_bus_tc) par->tga_chip_rev = TGA_READ_REG(par, TGA_START_REG) & 0xff; |