Merge git://git.infradead.org/mtd-2.6

* git://git.infradead.org/mtd-2.6: (69 commits)
  Revert "[MTD] m25p80.c code cleanup"
  [MTD] [NAND] GPIO driver depends on ARM... for now.
  [MTD] [NAND] sh_flctl: fix compile error
  [MTD] [NOR] AT49BV6416 has swapped erase regions
  [MTD] [NAND] GPIO NAND flash driver
  [MTD] cmdlineparts documentation change - explain where mtd-id comes from
  [MTD] cfi_cmdset_0002.c: Add Macronix CFI V1.0 TopBottom detection
  [MTD] [NAND] Fix compilation warnings in drivers/mtd/nand/cs553x_nand.c
  [JFFS2] Write buffer offset adjustment for NOR-ECC (Sibley) flash
  [MTD] mtdoops: Fix a bug where block may not be erased
  [MTD] mtdoops: Add a magic number to logged kernel oops
  [MTD] mtdoops: Fix an off by one error
  [JFFS2] Correct parameter names of jffs2_compress() in comments
  [MTD] [NAND] sh_flctl: add support for Renesas SuperH FLCTL
  [MTD] [NAND] Bug on atmel_nand HW ECC : OOB info not correctly written
  [MTD] [MAPS] Remove unused variable after ROM API cleanup.
  [MTD] m25p80.c extended jedec support (v2)
  [MTD] remove unused mtd parameter in of_mtd_parse_partitions()
  [MTD] [NAND] remove dead Kconfig associated with !CONFIG_PPC_MERGE
  [MTD] [NAND] driver extension to support NAND on TQM85xx modules
  ...

8 files changed, 203 insertions, 200 deletions

diff --git a/fs/Kconfig b/fs/Kconfig
index c189089..4eca61c 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -1168,195 +1168,7 @@ config EFS_FS
 	  To compile the EFS file system support as a module, choose M here: the
 	  module will be called efs.
 
-config JFFS2_FS
-	tristate "Journalling Flash File System v2 (JFFS2) support"
-	select CRC32
-	depends on MTD
-	help
-	  JFFS2 is the second generation of the Journalling Flash File System
-	  for use on diskless embedded devices. It provides improved wear
-	  levelling, compression and support for hard links. You cannot use
-	  this on normal block devices, only on 'MTD' devices.
-
-	  Further information on the design and implementation of JFFS2 is
-	  available at <http://sources.redhat.com/jffs2/>.
-
-config JFFS2_FS_DEBUG
-	int "JFFS2 debugging verbosity (0 = quiet, 2 = noisy)"
-	depends on JFFS2_FS
-	default "0"
-	help
-	  This controls the amount of debugging messages produced by the JFFS2
-	  code. Set it to zero for use in production systems. For evaluation,
-	  testing and debugging, it's advisable to set it to one. This will
-	  enable a few assertions and will print debugging messages at the
-	  KERN_DEBUG loglevel, where they won't normally be visible. Level 2
-	  is unlikely to be useful - it enables extra debugging in certain
-	  areas which at one point needed debugging, but when the bugs were
-	  located and fixed, the detailed messages were relegated to level 2.
-
-	  If reporting bugs, please try to have available a full dump of the
-	  messages at debug level 1 while the misbehaviour was occurring.
-
-config JFFS2_FS_WRITEBUFFER
-	bool "JFFS2 write-buffering support"
-	depends on JFFS2_FS
-	default y
-	help
-	  This enables the write-buffering support in JFFS2.
-
-	  This functionality is required to support JFFS2 on the following
-	  types of flash devices:
-	    - NAND flash
-	    - NOR flash with transparent ECC
-	    - DataFlash
-
-config JFFS2_FS_WBUF_VERIFY
-	bool "Verify JFFS2 write-buffer reads"
-	depends on JFFS2_FS_WRITEBUFFER
-	default n
-	help
-	  This causes JFFS2 to read back every page written through the
-	  write-buffer, and check for errors.
-
-config JFFS2_SUMMARY
-	bool "JFFS2 summary support (EXPERIMENTAL)"
-	depends on JFFS2_FS && EXPERIMENTAL
-	default n
-	help
-	  This feature makes it possible to use summary information
-	  for faster filesystem mount.
-
-	  The summary information can be inserted into a filesystem image
-	  by the utility 'sumtool'.
-
-	  If unsure, say 'N'.
-
-config JFFS2_FS_XATTR
-	bool "JFFS2 XATTR support (EXPERIMENTAL)"
-	depends on JFFS2_FS && EXPERIMENTAL
-	default n
-	help
-	  Extended attributes are name:value pairs associated with inodes by
-	  the kernel or by users (see the attr(5) manual page, or visit
-	  <http://acl.bestbits.at/> for details).
-
-	  If unsure, say N.
-
-config JFFS2_FS_POSIX_ACL
-	bool "JFFS2 POSIX Access Control Lists"
-	depends on JFFS2_FS_XATTR
-	default y
-	select FS_POSIX_ACL
-	help
-	  Posix Access Control Lists (ACLs) support permissions for users and
-	  groups beyond the owner/group/world scheme.
-
-	  To learn more about Access Control Lists, visit the Posix ACLs for
-	  Linux website <http://acl.bestbits.at/>.
-
-	  If you don't know what Access Control Lists are, say N
-
-config JFFS2_FS_SECURITY
-	bool "JFFS2 Security Labels"
-	depends on JFFS2_FS_XATTR
-	default y
-	help
-	  Security labels support alternative access control models
-	  implemented by security modules like SELinux.  This option
-	  enables an extended attribute handler for file security
-	  labels in the jffs2 filesystem.
-
-	  If you are not using a security module that requires using
-	  extended attributes for file security labels, say N.
-
-config JFFS2_COMPRESSION_OPTIONS
-	bool "Advanced compression options for JFFS2"
-	depends on JFFS2_FS
-	default n
-	help
-	  Enabling this option allows you to explicitly choose which
-	  compression modules, if any, are enabled in JFFS2. Removing
-	  compressors can mean you cannot read existing file systems,
-	  and enabling experimental compressors can mean that you
-	  write a file system which cannot be read by a standard kernel.
-
-	  If unsure, you should _definitely_ say 'N'.
-
-config JFFS2_ZLIB
-	bool "JFFS2 ZLIB compression support" if JFFS2_COMPRESSION_OPTIONS
-	select ZLIB_INFLATE
-	select ZLIB_DEFLATE
-	depends on JFFS2_FS
-	default y
-	help
-	  Zlib is designed to be a free, general-purpose, legally unencumbered,
-	  lossless data-compression library for use on virtually any computer
-	  hardware and operating system. See <http://www.gzip.org/zlib/> for
-	  further information.
-
-	  Say 'Y' if unsure.
-
-config JFFS2_LZO
-	bool "JFFS2 LZO compression support" if JFFS2_COMPRESSION_OPTIONS
-	select LZO_COMPRESS
-	select LZO_DECOMPRESS
-	depends on JFFS2_FS
-	default n
-	help
-	  minilzo-based compression. Generally works better than Zlib.
-
-	  This feature was added in July, 2007. Say 'N' if you need
-	  compatibility with older bootloaders or kernels.
-
-config JFFS2_RTIME
-	bool "JFFS2 RTIME compression support" if JFFS2_COMPRESSION_OPTIONS
-	depends on JFFS2_FS
-	default y
-	help
-	  Rtime does manage to recompress already-compressed data. Say 'Y' if unsure.
-
-config JFFS2_RUBIN
-	bool "JFFS2 RUBIN compression support" if JFFS2_COMPRESSION_OPTIONS
-	depends on JFFS2_FS
-	default n
-	help
-	  RUBINMIPS and DYNRUBIN compressors. Say 'N' if unsure.
-
-choice
-	prompt "JFFS2 default compression mode" if JFFS2_COMPRESSION_OPTIONS
-	default JFFS2_CMODE_PRIORITY
-	depends on JFFS2_FS
-	help
-	  You can set here the default compression mode of JFFS2 from
-	  the available compression modes. Don't touch if unsure.
-
-config JFFS2_CMODE_NONE
-	bool "no compression"
-	help
-	  Uses no compression.
-
-config JFFS2_CMODE_PRIORITY
-	bool "priority"
-	help
-	  Tries the compressors in a predefined order and chooses the first
-	  successful one.
-
-config JFFS2_CMODE_SIZE
-	bool "size (EXPERIMENTAL)"
-	help
-	  Tries all compressors and chooses the one which has the smallest
-	  result.
-
-config JFFS2_CMODE_FAVOURLZO
-	bool "Favour LZO"
-	help
-	  Tries all compressors and chooses the one which has the smallest
-	  result but gives some preference to LZO (which has faster
-	  decompression) at the expense of size.
-
-endchoice
-
+source "fs/jffs2/Kconfig"
 # UBIFS File system configuration
 source "fs/ubifs/Kconfig"
 
diff --git a/fs/jffs2/Kconfig b/fs/jffs2/Kconfig
new file mode 100644
index 0000000..6ae169c
--- /dev/null
+++ b/fs/jffs2/Kconfig
@@ -0,0 +1,188 @@
+config JFFS2_FS
+	tristate "Journalling Flash File System v2 (JFFS2) support"
+	select CRC32
+	depends on MTD
+	help
+	  JFFS2 is the second generation of the Journalling Flash File System
+	  for use on diskless embedded devices. It provides improved wear
+	  levelling, compression and support for hard links. You cannot use
+	  this on normal block devices, only on 'MTD' devices.
+
+	  Further information on the design and implementation of JFFS2 is
+	  available at <http://sources.redhat.com/jffs2/>.
+
+config JFFS2_FS_DEBUG
+	int "JFFS2 debugging verbosity (0 = quiet, 2 = noisy)"
+	depends on JFFS2_FS
+	default "0"
+	help
+	  This controls the amount of debugging messages produced by the JFFS2
+	  code. Set it to zero for use in production systems. For evaluation,
+	  testing and debugging, it's advisable to set it to one. This will
+	  enable a few assertions and will print debugging messages at the
+	  KERN_DEBUG loglevel, where they won't normally be visible. Level 2
+	  is unlikely to be useful - it enables extra debugging in certain
+	  areas which at one point needed debugging, but when the bugs were
+	  located and fixed, the detailed messages were relegated to level 2.
+
+	  If reporting bugs, please try to have available a full dump of the
+	  messages at debug level 1 while the misbehaviour was occurring.
+
+config JFFS2_FS_WRITEBUFFER
+	bool "JFFS2 write-buffering support"
+	depends on JFFS2_FS
+	default y
+	help
+	  This enables the write-buffering support in JFFS2.
+
+	  This functionality is required to support JFFS2 on the following
+	  types of flash devices:
+	    - NAND flash
+	    - NOR flash with transparent ECC
+	    - DataFlash
+
+config JFFS2_FS_WBUF_VERIFY
+	bool "Verify JFFS2 write-buffer reads"
+	depends on JFFS2_FS_WRITEBUFFER
+	default n
+	help
+	  This causes JFFS2 to read back every page written through the
+	  write-buffer, and check for errors.
+
+config JFFS2_SUMMARY
+	bool "JFFS2 summary support (EXPERIMENTAL)"
+	depends on JFFS2_FS && EXPERIMENTAL
+	default n
+	help
+	  This feature makes it possible to use summary information
+	  for faster filesystem mount.
+
+	  The summary information can be inserted into a filesystem image
+	  by the utility 'sumtool'.
+
+	  If unsure, say 'N'.
+
+config JFFS2_FS_XATTR
+	bool "JFFS2 XATTR support (EXPERIMENTAL)"
+	depends on JFFS2_FS && EXPERIMENTAL
+	default n
+	help
+	  Extended attributes are name:value pairs associated with inodes by
+	  the kernel or by users (see the attr(5) manual page, or visit
+	  <http://acl.bestbits.at/> for details).
+
+	  If unsure, say N.
+
+config JFFS2_FS_POSIX_ACL
+	bool "JFFS2 POSIX Access Control Lists"
+	depends on JFFS2_FS_XATTR
+	default y
+	select FS_POSIX_ACL
+	help
+	  Posix Access Control Lists (ACLs) support permissions for users and
+	  groups beyond the owner/group/world scheme.
+
+	  To learn more about Access Control Lists, visit the Posix ACLs for
+	  Linux website <http://acl.bestbits.at/>.
+
+	  If you don't know what Access Control Lists are, say N
+
+config JFFS2_FS_SECURITY
+	bool "JFFS2 Security Labels"
+	depends on JFFS2_FS_XATTR
+	default y
+	help
+	  Security labels support alternative access control models
+	  implemented by security modules like SELinux.  This option
+	  enables an extended attribute handler for file security
+	  labels in the jffs2 filesystem.
+
+	  If you are not using a security module that requires using
+	  extended attributes for file security labels, say N.
+
+config JFFS2_COMPRESSION_OPTIONS
+	bool "Advanced compression options for JFFS2"
+	depends on JFFS2_FS
+	default n
+	help
+	  Enabling this option allows you to explicitly choose which
+	  compression modules, if any, are enabled in JFFS2. Removing
+	  compressors can mean you cannot read existing file systems,
+	  and enabling experimental compressors can mean that you
+	  write a file system which cannot be read by a standard kernel.
+
+	  If unsure, you should _definitely_ say 'N'.
+
+config JFFS2_ZLIB
+	bool "JFFS2 ZLIB compression support" if JFFS2_COMPRESSION_OPTIONS
+	select ZLIB_INFLATE
+	select ZLIB_DEFLATE
+	depends on JFFS2_FS
+	default y
+	help
+	  Zlib is designed to be a free, general-purpose, legally unencumbered,
+	  lossless data-compression library for use on virtually any computer
+	  hardware and operating system. See <http://www.gzip.org/zlib/> for
+	  further information.
+
+	  Say 'Y' if unsure.
+
+config JFFS2_LZO
+	bool "JFFS2 LZO compression support" if JFFS2_COMPRESSION_OPTIONS
+	select LZO_COMPRESS
+	select LZO_DECOMPRESS
+	depends on JFFS2_FS
+	default n
+	help
+	  minilzo-based compression. Generally works better than Zlib.
+
+	  This feature was added in July, 2007. Say 'N' if you need
+	  compatibility with older bootloaders or kernels.
+
+config JFFS2_RTIME
+	bool "JFFS2 RTIME compression support" if JFFS2_COMPRESSION_OPTIONS
+	depends on JFFS2_FS
+	default y
+	help
+	  Rtime does manage to recompress already-compressed data. Say 'Y' if unsure.
+
+config JFFS2_RUBIN
+	bool "JFFS2 RUBIN compression support" if JFFS2_COMPRESSION_OPTIONS
+	depends on JFFS2_FS
+	default n
+	help
+	  RUBINMIPS and DYNRUBIN compressors. Say 'N' if unsure.
+
+choice
+	prompt "JFFS2 default compression mode" if JFFS2_COMPRESSION_OPTIONS
+	default JFFS2_CMODE_PRIORITY
+	depends on JFFS2_FS
+	help
+	  You can set here the default compression mode of JFFS2 from
+	  the available compression modes. Don't touch if unsure.
+
+config JFFS2_CMODE_NONE
+	bool "no compression"
+	help
+	  Uses no compression.
+
+config JFFS2_CMODE_PRIORITY
+	bool "priority"
+	help
+	  Tries the compressors in a predefined order and chooses the first
+	  successful one.
+
+config JFFS2_CMODE_SIZE
+	bool "size (EXPERIMENTAL)"
+	help
+	  Tries all compressors and chooses the one which has the smallest
+	  result.
+
+config JFFS2_CMODE_FAVOURLZO
+	bool "Favour LZO"
+	help
+	  Tries all compressors and chooses the one which has the smallest
+	  result but gives some preference to LZO (which has faster
+	  decompression) at the expense of size.
+
+endchoice
diff --git a/fs/jffs2/compr.c b/fs/jffs2/compr.c
index 86739ee..f25e70c 100644
--- a/fs/jffs2/compr.c
+++ b/fs/jffs2/compr.c
@@ -53,8 +53,8 @@ static int jffs2_is_best_compression(struct jffs2_compressor *this,
 }
 
 /* jffs2_compress:
- * @data: Pointer to uncompressed data
- * @cdata: Pointer to returned pointer to buffer for compressed data
+ * @data_in: Pointer to uncompressed data
+ * @cpage_out: Pointer to returned pointer to buffer for compressed data
  * @datalen: On entry, holds the amount of data available for compression.
  *	On exit, expected to hold the amount of data actually compressed.
  * @cdatalen: On entry, holds the amount of space available for compressed
diff --git a/fs/jffs2/dir.c b/fs/jffs2/dir.c
index cd219ef..b1aaae8 100644
--- a/fs/jffs2/dir.c
+++ b/fs/jffs2/dir.c
@@ -311,7 +311,7 @@ static int jffs2_symlink (struct inode *dir_i, struct dentry *dentry, const char
 	/* FIXME: If you care. We'd need to use frags for the target
 	   if it grows much more than this */
 	if (targetlen > 254)
-		return -EINVAL;
+		return -ENAMETOOLONG;
 
 	ri = jffs2_alloc_raw_inode();
 
diff --git a/fs/jffs2/erase.c b/fs/jffs2/erase.c
index dddb2a6..259461b 100644
--- a/fs/jffs2/erase.c
+++ b/fs/jffs2/erase.c
@@ -68,7 +68,7 @@ static void jffs2_erase_block(struct jffs2_sb_info *c,
 	instr->len = c->sector_size;
 	instr->callback = jffs2_erase_callback;
 	instr->priv = (unsigned long)(&instr[1]);
-	instr->fail_addr = 0xffffffff;
+	instr->fail_addr = MTD_FAIL_ADDR_UNKNOWN;
 
 	((struct erase_priv_struct *)instr->priv)->jeb = jeb;
 	((struct erase_priv_struct *)instr->priv)->c = c;
@@ -175,7 +175,7 @@ static void jffs2_erase_failed(struct jffs2_sb_info *c, struct jffs2_eraseblock
 {
 	/* For NAND, if the failure did not occur at the device level for a
 	   specific physical page, don't bother updating the bad block table. */
-	if (jffs2_cleanmarker_oob(c) && (bad_offset != 0xffffffff)) {
+	if (jffs2_cleanmarker_oob(c) && (bad_offset != MTD_FAIL_ADDR_UNKNOWN)) {
 		/* We had a device-level failure to erase.  Let's see if we've
 		   failed too many times. */
 		if (!jffs2_write_nand_badblock(c, jeb, bad_offset)) {
diff --git a/fs/jffs2/fs.c b/fs/jffs2/fs.c
index 086c438..249305d 100644
--- a/fs/jffs2/fs.c
+++ b/fs/jffs2/fs.c
@@ -207,6 +207,8 @@ int jffs2_statfs(struct dentry *dentry, struct kstatfs *buf)
 	buf->f_files = 0;
 	buf->f_ffree = 0;
 	buf->f_namelen = JFFS2_MAX_NAME_LEN;
+	buf->f_fsid.val[0] = JFFS2_SUPER_MAGIC;
+	buf->f_fsid.val[1] = c->mtd->index;
 
 	spin_lock(&c->erase_completion_lock);
 	avail = c->dirty_size + c->free_size;
@@ -440,14 +442,14 @@ struct inode *jffs2_new_inode (struct inode *dir_i, int mode, struct jffs2_raw_i
 
 	memset(ri, 0, sizeof(*ri));
 	/* Set OS-specific defaults for new inodes */
-	ri->uid = cpu_to_je16(current->fsuid);
+	ri->uid = cpu_to_je16(current_fsuid());
 
 	if (dir_i->i_mode & S_ISGID) {
 		ri->gid = cpu_to_je16(dir_i->i_gid);
 		if (S_ISDIR(mode))
 			mode |= S_ISGID;
 	} else {
-		ri->gid = cpu_to_je16(current->fsgid);
+		ri->gid = cpu_to_je16(current_fsgid());
 	}
 
 	/* POSIX ACLs have to be processed now, at least partly.
diff --git a/fs/jffs2/nodemgmt.c b/fs/jffs2/nodemgmt.c
index a9bf960..0875b60 100644
--- a/fs/jffs2/nodemgmt.c
+++ b/fs/jffs2/nodemgmt.c
@@ -261,6 +261,10 @@ static int jffs2_find_nextblock(struct jffs2_sb_info *c)
 
 	jffs2_sum_reset_collected(c->summary); /* reset collected summary */
 
+	/* adjust write buffer offset, else we get a non contiguous write bug */
+	if (!(c->wbuf_ofs % c->sector_size) && !c->wbuf_len)
+		c->wbuf_ofs = 0xffffffff;
+
 	D1(printk(KERN_DEBUG "jffs2_find_nextblock(): new nextblock = 0x%08x\n", c->nextblock->offset));
 
 	return 0;
diff --git a/fs/jffs2/wbuf.c b/fs/jffs2/wbuf.c
index 0e78b00..d9a721e 100644
--- a/fs/jffs2/wbuf.c
+++ b/fs/jffs2/wbuf.c
@@ -679,10 +679,7 @@ static int __jffs2_flush_wbuf(struct jffs2_sb_info *c, int pad)
 
 	memset(c->wbuf,0xff,c->wbuf_pagesize);
 	/* adjust write buffer offset, else we get a non contiguous write bug */
-	if (SECTOR_ADDR(c->wbuf_ofs) == SECTOR_ADDR(c->wbuf_ofs+c->wbuf_pagesize))
-		c->wbuf_ofs += c->wbuf_pagesize;
-	else
-		c->wbuf_ofs = 0xffffffff;
+	c->wbuf_ofs += c->wbuf_pagesize;
 	c->wbuf_len = 0;
 	return 0;
 }