diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /include/linux/hdreg.h | |
download | kernel_samsung_espresso10-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip kernel_samsung_espresso10-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz kernel_samsung_espresso10-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.bz2 |
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'include/linux/hdreg.h')
-rw-r--r-- | include/linux/hdreg.h | 703 |
1 files changed, 703 insertions, 0 deletions
diff --git a/include/linux/hdreg.h b/include/linux/hdreg.h new file mode 100644 index 0000000..b5d6600 --- /dev/null +++ b/include/linux/hdreg.h @@ -0,0 +1,703 @@ +#ifndef _LINUX_HDREG_H +#define _LINUX_HDREG_H + +#ifdef __KERNEL__ +#include <linux/ata.h> + +/* + * This file contains some defines for the AT-hd-controller. + * Various sources. + */ + +/* ide.c has its own port definitions in "ide.h" */ + +#define HD_IRQ 14 + +/* Hd controller regs. Ref: IBM AT Bios-listing */ +#define HD_DATA 0x1f0 /* _CTL when writing */ +#define HD_ERROR 0x1f1 /* see err-bits */ +#define HD_NSECTOR 0x1f2 /* nr of sectors to read/write */ +#define HD_SECTOR 0x1f3 /* starting sector */ +#define HD_LCYL 0x1f4 /* starting cylinder */ +#define HD_HCYL 0x1f5 /* high byte of starting cyl */ +#define HD_CURRENT 0x1f6 /* 101dhhhh , d=drive, hhhh=head */ +#define HD_STATUS 0x1f7 /* see status-bits */ +#define HD_FEATURE HD_ERROR /* same io address, read=error, write=feature */ +#define HD_PRECOMP HD_FEATURE /* obsolete use of this port - predates IDE */ +#define HD_COMMAND HD_STATUS /* same io address, read=status, write=cmd */ + +#define HD_CMD 0x3f6 /* used for resets */ +#define HD_ALTSTATUS 0x3f6 /* same as HD_STATUS but doesn't clear irq */ + +/* remainder is shared between hd.c, ide.c, ide-cd.c, and the hdparm utility */ + +/* Bits of HD_STATUS */ +#define ERR_STAT 0x01 +#define INDEX_STAT 0x02 +#define ECC_STAT 0x04 /* Corrected error */ +#define DRQ_STAT 0x08 +#define SEEK_STAT 0x10 +#define SRV_STAT 0x10 +#define WRERR_STAT 0x20 +#define READY_STAT 0x40 +#define BUSY_STAT 0x80 + +/* Bits for HD_ERROR */ +#define MARK_ERR 0x01 /* Bad address mark */ +#define TRK0_ERR 0x02 /* couldn't find track 0 */ +#define ABRT_ERR 0x04 /* Command aborted */ +#define MCR_ERR 0x08 /* media change request */ +#define ID_ERR 0x10 /* ID field not found */ +#define MC_ERR 0x20 /* media changed */ +#define ECC_ERR 0x40 /* Uncorrectable ECC error */ +#define BBD_ERR 0x80 /* pre-EIDE meaning: block marked bad */ +#define ICRC_ERR 0x80 /* new meaning: CRC error during transfer */ + +/* Bits of HD_NSECTOR */ +#define CD 0x01 +#define IO 0x02 +#define REL 0x04 +#define TAG_MASK 0xf8 +#endif /* __KERNEL__ */ + +/* + * Command Header sizes for IOCTL commands + */ + +#define HDIO_DRIVE_CMD_HDR_SIZE (4 * sizeof(u8)) +#define HDIO_DRIVE_HOB_HDR_SIZE (8 * sizeof(u8)) +#define HDIO_DRIVE_TASK_HDR_SIZE (8 * sizeof(u8)) + +#define IDE_DRIVE_TASK_INVALID -1 +#define IDE_DRIVE_TASK_NO_DATA 0 +#define IDE_DRIVE_TASK_SET_XFER 1 + +#define IDE_DRIVE_TASK_IN 2 + +#define IDE_DRIVE_TASK_OUT 3 +#define IDE_DRIVE_TASK_RAW_WRITE 4 + +/* + * Define standard taskfile in/out register + */ +#define IDE_TASKFILE_STD_OUT_FLAGS 0xFE +#define IDE_TASKFILE_STD_IN_FLAGS 0xFE +#define IDE_HOB_STD_OUT_FLAGS 0x3C +#define IDE_HOB_STD_IN_FLAGS 0x3C + +typedef unsigned char task_ioreg_t; +typedef unsigned long sata_ioreg_t; + +typedef union ide_reg_valid_s { + unsigned all : 16; + struct { + unsigned data : 1; + unsigned error_feature : 1; + unsigned sector : 1; + unsigned nsector : 1; + unsigned lcyl : 1; + unsigned hcyl : 1; + unsigned select : 1; + unsigned status_command : 1; + + unsigned data_hob : 1; + unsigned error_feature_hob : 1; + unsigned sector_hob : 1; + unsigned nsector_hob : 1; + unsigned lcyl_hob : 1; + unsigned hcyl_hob : 1; + unsigned select_hob : 1; + unsigned control_hob : 1; + } b; +} ide_reg_valid_t; + +typedef struct ide_task_request_s { + task_ioreg_t io_ports[8]; + task_ioreg_t hob_ports[8]; + ide_reg_valid_t out_flags; + ide_reg_valid_t in_flags; + int data_phase; + int req_cmd; + unsigned long out_size; + unsigned long in_size; +} ide_task_request_t; + +typedef struct ide_ioctl_request_s { + ide_task_request_t *task_request; + unsigned char *out_buffer; + unsigned char *in_buffer; +} ide_ioctl_request_t; + +struct hd_drive_cmd_hdr { + task_ioreg_t command; + task_ioreg_t sector_number; + task_ioreg_t feature; + task_ioreg_t sector_count; +}; + +typedef struct hd_drive_task_hdr { + task_ioreg_t data; + task_ioreg_t feature; + task_ioreg_t sector_count; + task_ioreg_t sector_number; + task_ioreg_t low_cylinder; + task_ioreg_t high_cylinder; + task_ioreg_t device_head; + task_ioreg_t command; +} task_struct_t; + +typedef struct hd_drive_hob_hdr { + task_ioreg_t data; + task_ioreg_t feature; + task_ioreg_t sector_count; + task_ioreg_t sector_number; + task_ioreg_t low_cylinder; + task_ioreg_t high_cylinder; + task_ioreg_t device_head; + task_ioreg_t control; +} hob_struct_t; + +#define TASKFILE_INVALID 0x7fff +#define TASKFILE_48 0x8000 + +#define TASKFILE_NO_DATA 0x0000 + +#define TASKFILE_IN 0x0001 +#define TASKFILE_MULTI_IN 0x0002 + +#define TASKFILE_OUT 0x0004 +#define TASKFILE_MULTI_OUT 0x0008 +#define TASKFILE_IN_OUT 0x0010 + +#define TASKFILE_IN_DMA 0x0020 +#define TASKFILE_OUT_DMA 0x0040 +#define TASKFILE_IN_DMAQ 0x0080 +#define TASKFILE_OUT_DMAQ 0x0100 + +#define TASKFILE_P_IN 0x0200 +#define TASKFILE_P_OUT 0x0400 +#define TASKFILE_P_IN_DMA 0x0800 +#define TASKFILE_P_OUT_DMA 0x1000 +#define TASKFILE_P_IN_DMAQ 0x2000 +#define TASKFILE_P_OUT_DMAQ 0x4000 + +/* ATA/ATAPI Commands pre T13 Spec */ +#define WIN_NOP 0x00 +/* + * 0x01->0x02 Reserved + */ +#define CFA_REQ_EXT_ERROR_CODE 0x03 /* CFA Request Extended Error Code */ +/* + * 0x04->0x07 Reserved + */ +#define WIN_SRST 0x08 /* ATAPI soft reset command */ +#define WIN_DEVICE_RESET 0x08 +/* + * 0x09->0x0F Reserved + */ +#define WIN_RECAL 0x10 +#define WIN_RESTORE WIN_RECAL +/* + * 0x10->0x1F Reserved + */ +#define WIN_READ 0x20 /* 28-Bit */ +#define WIN_READ_ONCE 0x21 /* 28-Bit without retries */ +#define WIN_READ_LONG 0x22 /* 28-Bit */ +#define WIN_READ_LONG_ONCE 0x23 /* 28-Bit without retries */ +#define WIN_READ_EXT 0x24 /* 48-Bit */ +#define WIN_READDMA_EXT 0x25 /* 48-Bit */ +#define WIN_READDMA_QUEUED_EXT 0x26 /* 48-Bit */ +#define WIN_READ_NATIVE_MAX_EXT 0x27 /* 48-Bit */ +/* + * 0x28 + */ +#define WIN_MULTREAD_EXT 0x29 /* 48-Bit */ +/* + * 0x2A->0x2F Reserved + */ +#define WIN_WRITE 0x30 /* 28-Bit */ +#define WIN_WRITE_ONCE 0x31 /* 28-Bit without retries */ +#define WIN_WRITE_LONG 0x32 /* 28-Bit */ +#define WIN_WRITE_LONG_ONCE 0x33 /* 28-Bit without retries */ +#define WIN_WRITE_EXT 0x34 /* 48-Bit */ +#define WIN_WRITEDMA_EXT 0x35 /* 48-Bit */ +#define WIN_WRITEDMA_QUEUED_EXT 0x36 /* 48-Bit */ +#define WIN_SET_MAX_EXT 0x37 /* 48-Bit */ +#define CFA_WRITE_SECT_WO_ERASE 0x38 /* CFA Write Sectors without erase */ +#define WIN_MULTWRITE_EXT 0x39 /* 48-Bit */ +/* + * 0x3A->0x3B Reserved + */ +#define WIN_WRITE_VERIFY 0x3C /* 28-Bit */ +/* + * 0x3D->0x3F Reserved + */ +#define WIN_VERIFY 0x40 /* 28-Bit - Read Verify Sectors */ +#define WIN_VERIFY_ONCE 0x41 /* 28-Bit - without retries */ +#define WIN_VERIFY_EXT 0x42 /* 48-Bit */ +/* + * 0x43->0x4F Reserved + */ +#define WIN_FORMAT 0x50 +/* + * 0x51->0x5F Reserved + */ +#define WIN_INIT 0x60 +/* + * 0x61->0x5F Reserved + */ +#define WIN_SEEK 0x70 /* 0x70-0x7F Reserved */ + +#define CFA_TRANSLATE_SECTOR 0x87 /* CFA Translate Sector */ +#define WIN_DIAGNOSE 0x90 +#define WIN_SPECIFY 0x91 /* set drive geometry translation */ +#define WIN_DOWNLOAD_MICROCODE 0x92 +#define WIN_STANDBYNOW2 0x94 +#define WIN_STANDBY2 0x96 +#define WIN_SETIDLE2 0x97 +#define WIN_CHECKPOWERMODE2 0x98 +#define WIN_SLEEPNOW2 0x99 +/* + * 0x9A VENDOR + */ +#define WIN_PACKETCMD 0xA0 /* Send a packet command. */ +#define WIN_PIDENTIFY 0xA1 /* identify ATAPI device */ +#define WIN_QUEUED_SERVICE 0xA2 +#define WIN_SMART 0xB0 /* self-monitoring and reporting */ +#define CFA_ERASE_SECTORS 0xC0 +#define WIN_MULTREAD 0xC4 /* read sectors using multiple mode*/ +#define WIN_MULTWRITE 0xC5 /* write sectors using multiple mode */ +#define WIN_SETMULT 0xC6 /* enable/disable multiple mode */ +#define WIN_READDMA_QUEUED 0xC7 /* read sectors using Queued DMA transfers */ +#define WIN_READDMA 0xC8 /* read sectors using DMA transfers */ +#define WIN_READDMA_ONCE 0xC9 /* 28-Bit - without retries */ +#define WIN_WRITEDMA 0xCA /* write sectors using DMA transfers */ +#define WIN_WRITEDMA_ONCE 0xCB /* 28-Bit - without retries */ +#define WIN_WRITEDMA_QUEUED 0xCC /* write sectors using Queued DMA transfers */ +#define CFA_WRITE_MULTI_WO_ERASE 0xCD /* CFA Write multiple without erase */ +#define WIN_GETMEDIASTATUS 0xDA +#define WIN_ACKMEDIACHANGE 0xDB /* ATA-1, ATA-2 vendor */ +#define WIN_POSTBOOT 0xDC +#define WIN_PREBOOT 0xDD +#define WIN_DOORLOCK 0xDE /* lock door on removable drives */ +#define WIN_DOORUNLOCK 0xDF /* unlock door on removable drives */ +#define WIN_STANDBYNOW1 0xE0 +#define WIN_IDLEIMMEDIATE 0xE1 /* force drive to become "ready" */ +#define WIN_STANDBY 0xE2 /* Set device in Standby Mode */ +#define WIN_SETIDLE1 0xE3 +#define WIN_READ_BUFFER 0xE4 /* force read only 1 sector */ +#define WIN_CHECKPOWERMODE1 0xE5 +#define WIN_SLEEPNOW1 0xE6 +#define WIN_FLUSH_CACHE 0xE7 +#define WIN_WRITE_BUFFER 0xE8 /* force write only 1 sector */ +#define WIN_WRITE_SAME 0xE9 /* read ata-2 to use */ + /* SET_FEATURES 0x22 or 0xDD */ +#define WIN_FLUSH_CACHE_EXT 0xEA /* 48-Bit */ +#define WIN_IDENTIFY 0xEC /* ask drive to identify itself */ +#define WIN_MEDIAEJECT 0xED +#define WIN_IDENTIFY_DMA 0xEE /* same as WIN_IDENTIFY, but DMA */ +#define WIN_SETFEATURES 0xEF /* set special drive features */ +#define EXABYTE_ENABLE_NEST 0xF0 +#define WIN_SECURITY_SET_PASS 0xF1 +#define WIN_SECURITY_UNLOCK 0xF2 +#define WIN_SECURITY_ERASE_PREPARE 0xF3 +#define WIN_SECURITY_ERASE_UNIT 0xF4 +#define WIN_SECURITY_FREEZE_LOCK 0xF5 +#define WIN_SECURITY_DISABLE 0xF6 +#define WIN_READ_NATIVE_MAX 0xF8 /* return the native maximum address */ +#define WIN_SET_MAX 0xF9 +#define DISABLE_SEAGATE 0xFB + +/* WIN_SMART sub-commands */ + +#define SMART_READ_VALUES 0xD0 +#define SMART_READ_THRESHOLDS 0xD1 +#define SMART_AUTOSAVE 0xD2 +#define SMART_SAVE 0xD3 +#define SMART_IMMEDIATE_OFFLINE 0xD4 +#define SMART_READ_LOG_SECTOR 0xD5 +#define SMART_WRITE_LOG_SECTOR 0xD6 +#define SMART_WRITE_THRESHOLDS 0xD7 +#define SMART_ENABLE 0xD8 +#define SMART_DISABLE 0xD9 +#define SMART_STATUS 0xDA +#define SMART_AUTO_OFFLINE 0xDB + +/* Password used in TF4 & TF5 executing SMART commands */ + +#define SMART_LCYL_PASS 0x4F +#define SMART_HCYL_PASS 0xC2 + +/* WIN_SETFEATURES sub-commands */ +#define SETFEATURES_EN_8BIT 0x01 /* Enable 8-Bit Transfers */ +#define SETFEATURES_EN_WCACHE 0x02 /* Enable write cache */ +#define SETFEATURES_DIS_DEFECT 0x04 /* Disable Defect Management */ +#define SETFEATURES_EN_APM 0x05 /* Enable advanced power management */ +#define SETFEATURES_EN_SAME_R 0x22 /* for a region ATA-1 */ +#define SETFEATURES_DIS_MSN 0x31 /* Disable Media Status Notification */ +#define SETFEATURES_DIS_RETRY 0x33 /* Disable Retry */ +#define SETFEATURES_EN_AAM 0x42 /* Enable Automatic Acoustic Management */ +#define SETFEATURES_RW_LONG 0x44 /* Set Length of VS bytes */ +#define SETFEATURES_SET_CACHE 0x54 /* Set Cache segments to SC Reg. Val */ +#define SETFEATURES_DIS_RLA 0x55 /* Disable read look-ahead feature */ +#define SETFEATURES_EN_RI 0x5D /* Enable release interrupt */ +#define SETFEATURES_EN_SI 0x5E /* Enable SERVICE interrupt */ +#define SETFEATURES_DIS_RPOD 0x66 /* Disable reverting to power on defaults */ +#define SETFEATURES_DIS_ECC 0x77 /* Disable ECC byte count */ +#define SETFEATURES_DIS_8BIT 0x81 /* Disable 8-Bit Transfers */ +#define SETFEATURES_DIS_WCACHE 0x82 /* Disable write cache */ +#define SETFEATURES_EN_DEFECT 0x84 /* Enable Defect Management */ +#define SETFEATURES_DIS_APM 0x85 /* Disable advanced power management */ +#define SETFEATURES_EN_ECC 0x88 /* Enable ECC byte count */ +#define SETFEATURES_EN_MSN 0x95 /* Enable Media Status Notification */ +#define SETFEATURES_EN_RETRY 0x99 /* Enable Retry */ +#define SETFEATURES_EN_RLA 0xAA /* Enable read look-ahead feature */ +#define SETFEATURES_PREFETCH 0xAB /* Sets drive prefetch value */ +#define SETFEATURES_EN_REST 0xAC /* ATA-1 */ +#define SETFEATURES_4B_RW_LONG 0xBB /* Set Lenght of 4 bytes */ +#define SETFEATURES_DIS_AAM 0xC2 /* Disable Automatic Acoustic Management */ +#define SETFEATURES_EN_RPOD 0xCC /* Enable reverting to power on defaults */ +#define SETFEATURES_DIS_RI 0xDD /* Disable release interrupt ATAPI */ +#define SETFEATURES_EN_SAME_M 0xDD /* for a entire device ATA-1 */ +#define SETFEATURES_DIS_SI 0xDE /* Disable SERVICE interrupt ATAPI */ + +/* WIN_SECURITY sub-commands */ + +#define SECURITY_SET_PASSWORD 0xBA +#define SECURITY_UNLOCK 0xBB +#define SECURITY_ERASE_PREPARE 0xBC +#define SECURITY_ERASE_UNIT 0xBD +#define SECURITY_FREEZE_LOCK 0xBE +#define SECURITY_DISABLE_PASSWORD 0xBF + +struct hd_geometry { + unsigned char heads; + unsigned char sectors; + unsigned short cylinders; + unsigned long start; +}; + +/* hd/ide ctl's that pass (arg) ptrs to user space are numbered 0x030n/0x031n */ +#define HDIO_GETGEO 0x0301 /* get device geometry */ +#define HDIO_GET_UNMASKINTR 0x0302 /* get current unmask setting */ +#define HDIO_GET_MULTCOUNT 0x0304 /* get current IDE blockmode setting */ +#define HDIO_GET_QDMA 0x0305 /* get use-qdma flag */ + +#define HDIO_SET_XFER 0x0306 /* set transfer rate via proc */ + +#define HDIO_OBSOLETE_IDENTITY 0x0307 /* OBSOLETE, DO NOT USE: returns 142 bytes */ +#define HDIO_GET_KEEPSETTINGS 0x0308 /* get keep-settings-on-reset flag */ +#define HDIO_GET_32BIT 0x0309 /* get current io_32bit setting */ +#define HDIO_GET_NOWERR 0x030a /* get ignore-write-error flag */ +#define HDIO_GET_DMA 0x030b /* get use-dma flag */ +#define HDIO_GET_NICE 0x030c /* get nice flags */ +#define HDIO_GET_IDENTITY 0x030d /* get IDE identification info */ +#define HDIO_GET_WCACHE 0x030e /* get write cache mode on|off */ +#define HDIO_GET_ACOUSTIC 0x030f /* get acoustic value */ +#define HDIO_GET_ADDRESS 0x0310 /* */ + +#define HDIO_GET_BUSSTATE 0x031a /* get the bus state of the hwif */ +#define HDIO_TRISTATE_HWIF 0x031b /* execute a channel tristate */ +#define HDIO_DRIVE_RESET 0x031c /* execute a device reset */ +#define HDIO_DRIVE_TASKFILE 0x031d /* execute raw taskfile */ +#define HDIO_DRIVE_TASK 0x031e /* execute task and special drive command */ +#define HDIO_DRIVE_CMD 0x031f /* execute a special drive command */ +#define HDIO_DRIVE_CMD_AEB HDIO_DRIVE_TASK + +/* hd/ide ctl's that pass (arg) non-ptr values are numbered 0x032n/0x033n */ +#define HDIO_SET_MULTCOUNT 0x0321 /* change IDE blockmode */ +#define HDIO_SET_UNMASKINTR 0x0322 /* permit other irqs during I/O */ +#define HDIO_SET_KEEPSETTINGS 0x0323 /* keep ioctl settings on reset */ +#define HDIO_SET_32BIT 0x0324 /* change io_32bit flags */ +#define HDIO_SET_NOWERR 0x0325 /* change ignore-write-error flag */ +#define HDIO_SET_DMA 0x0326 /* change use-dma flag */ +#define HDIO_SET_PIO_MODE 0x0327 /* reconfig interface to new speed */ +#define HDIO_SCAN_HWIF 0x0328 /* register and (re)scan interface */ +#define HDIO_SET_NICE 0x0329 /* set nice flags */ +#define HDIO_UNREGISTER_HWIF 0x032a /* unregister interface */ +#define HDIO_SET_WCACHE 0x032b /* change write cache enable-disable */ +#define HDIO_SET_ACOUSTIC 0x032c /* change acoustic behavior */ +#define HDIO_SET_BUSSTATE 0x032d /* set the bus state of the hwif */ +#define HDIO_SET_QDMA 0x032e /* change use-qdma flag */ +#define HDIO_SET_ADDRESS 0x032f /* change lba addressing modes */ + +/* bus states */ +enum { + BUSSTATE_OFF = 0, + BUSSTATE_ON, + BUSSTATE_TRISTATE +}; + +/* hd/ide ctl's that pass (arg) ptrs to user space are numbered 0x033n/0x033n */ +/* 0x330 is reserved - used to be HDIO_GETGEO_BIG */ +/* 0x331 is reserved - used to be HDIO_GETGEO_BIG_RAW */ +/* 0x338 is reserved - used to be HDIO_SET_IDE_SCSI */ +/* 0x339 is reserved - used to be HDIO_SET_SCSI_IDE */ + +#define __NEW_HD_DRIVE_ID + +/* + * Structure returned by HDIO_GET_IDENTITY, as per ANSI NCITS ATA6 rev.1b spec. + * + * If you change something here, please remember to update fix_driveid() in + * ide/probe.c. + */ +struct hd_driveid { + unsigned short config; /* lots of obsolete bit flags */ + unsigned short cyls; /* Obsolete, "physical" cyls */ + unsigned short reserved2; /* reserved (word 2) */ + unsigned short heads; /* Obsolete, "physical" heads */ + unsigned short track_bytes; /* unformatted bytes per track */ + unsigned short sector_bytes; /* unformatted bytes per sector */ + unsigned short sectors; /* Obsolete, "physical" sectors per track */ + unsigned short vendor0; /* vendor unique */ + unsigned short vendor1; /* vendor unique */ + unsigned short vendor2; /* Retired vendor unique */ + unsigned char serial_no[20]; /* 0 = not_specified */ + unsigned short buf_type; /* Retired */ + unsigned short buf_size; /* Retired, 512 byte increments + * 0 = not_specified + */ + unsigned short ecc_bytes; /* for r/w long cmds; 0 = not_specified */ + unsigned char fw_rev[8]; /* 0 = not_specified */ + unsigned char model[40]; /* 0 = not_specified */ + unsigned char max_multsect; /* 0=not_implemented */ + unsigned char vendor3; /* vendor unique */ + unsigned short dword_io; /* 0=not_implemented; 1=implemented */ + unsigned char vendor4; /* vendor unique */ + unsigned char capability; /* (upper byte of word 49) + * 3: IORDYsup + * 2: IORDYsw + * 1: LBA + * 0: DMA + */ + unsigned short reserved50; /* reserved (word 50) */ + unsigned char vendor5; /* Obsolete, vendor unique */ + unsigned char tPIO; /* Obsolete, 0=slow, 1=medium, 2=fast */ + unsigned char vendor6; /* Obsolete, vendor unique */ + unsigned char tDMA; /* Obsolete, 0=slow, 1=medium, 2=fast */ + unsigned short field_valid; /* (word 53) + * 2: ultra_ok word 88 + * 1: eide_ok words 64-70 + * 0: cur_ok words 54-58 + */ + unsigned short cur_cyls; /* Obsolete, logical cylinders */ + unsigned short cur_heads; /* Obsolete, l heads */ + unsigned short cur_sectors; /* Obsolete, l sectors per track */ + unsigned short cur_capacity0; /* Obsolete, l total sectors on drive */ + unsigned short cur_capacity1; /* Obsolete, (2 words, misaligned int) */ + unsigned char multsect; /* current multiple sector count */ + unsigned char multsect_valid; /* when (bit0==1) multsect is ok */ + unsigned int lba_capacity; /* Obsolete, total number of sectors */ + unsigned short dma_1word; /* Obsolete, single-word dma info */ + unsigned short dma_mword; /* multiple-word dma info */ + unsigned short eide_pio_modes; /* bits 0:mode3 1:mode4 */ + unsigned short eide_dma_min; /* min mword dma cycle time (ns) */ + unsigned short eide_dma_time; /* recommended mword dma cycle time (ns) */ + unsigned short eide_pio; /* min cycle time (ns), no IORDY */ + unsigned short eide_pio_iordy; /* min cycle time (ns), with IORDY */ + unsigned short words69_70[2]; /* reserved words 69-70 + * future command overlap and queuing + */ + /* HDIO_GET_IDENTITY currently returns only words 0 through 70 */ + unsigned short words71_74[4]; /* reserved words 71-74 + * for IDENTIFY PACKET DEVICE command + */ + unsigned short queue_depth; /* (word 75) + * 15:5 reserved + * 4:0 Maximum queue depth -1 + */ + unsigned short words76_79[4]; /* reserved words 76-79 */ + unsigned short major_rev_num; /* (word 80) */ + unsigned short minor_rev_num; /* (word 81) */ + unsigned short command_set_1; /* (word 82) supported + * 15: Obsolete + * 14: NOP command + * 13: READ_BUFFER + * 12: WRITE_BUFFER + * 11: Obsolete + * 10: Host Protected Area + * 9: DEVICE Reset + * 8: SERVICE Interrupt + * 7: Release Interrupt + * 6: look-ahead + * 5: write cache + * 4: PACKET Command + * 3: Power Management Feature Set + * 2: Removable Feature Set + * 1: Security Feature Set + * 0: SMART Feature Set + */ + unsigned short command_set_2; /* (word 83) + * 15: Shall be ZERO + * 14: Shall be ONE + * 13: FLUSH CACHE EXT + * 12: FLUSH CACHE + * 11: Device Configuration Overlay + * 10: 48-bit Address Feature Set + * 9: Automatic Acoustic Management + * 8: SET MAX security + * 7: reserved 1407DT PARTIES + * 6: SetF sub-command Power-Up + * 5: Power-Up in Standby Feature Set + * 4: Removable Media Notification + * 3: APM Feature Set + * 2: CFA Feature Set + * 1: READ/WRITE DMA QUEUED + * 0: Download MicroCode + */ + unsigned short cfsse; /* (word 84) + * cmd set-feature supported extensions + * 15: Shall be ZERO + * 14: Shall be ONE + * 13:6 reserved + * 5: General Purpose Logging + * 4: Streaming Feature Set + * 3: Media Card Pass Through + * 2: Media Serial Number Valid + * 1: SMART selt-test supported + * 0: SMART error logging + */ + unsigned short cfs_enable_1; /* (word 85) + * command set-feature enabled + * 15: Obsolete + * 14: NOP command + * 13: READ_BUFFER + * 12: WRITE_BUFFER + * 11: Obsolete + * 10: Host Protected Area + * 9: DEVICE Reset + * 8: SERVICE Interrupt + * 7: Release Interrupt + * 6: look-ahead + * 5: write cache + * 4: PACKET Command + * 3: Power Management Feature Set + * 2: Removable Feature Set + * 1: Security Feature Set + * 0: SMART Feature Set + */ + unsigned short cfs_enable_2; /* (word 86) + * command set-feature enabled + * 15: Shall be ZERO + * 14: Shall be ONE + * 13: FLUSH CACHE EXT + * 12: FLUSH CACHE + * 11: Device Configuration Overlay + * 10: 48-bit Address Feature Set + * 9: Automatic Acoustic Management + * 8: SET MAX security + * 7: reserved 1407DT PARTIES + * 6: SetF sub-command Power-Up + * 5: Power-Up in Standby Feature Set + * 4: Removable Media Notification + * 3: APM Feature Set + * 2: CFA Feature Set + * 1: READ/WRITE DMA QUEUED + * 0: Download MicroCode + */ + unsigned short csf_default; /* (word 87) + * command set-feature default + * 15: Shall be ZERO + * 14: Shall be ONE + * 13:6 reserved + * 5: General Purpose Logging enabled + * 4: Valid CONFIGURE STREAM executed + * 3: Media Card Pass Through enabled + * 2: Media Serial Number Valid + * 1: SMART selt-test supported + * 0: SMART error logging + */ + unsigned short dma_ultra; /* (word 88) */ + unsigned short trseuc; /* time required for security erase */ + unsigned short trsEuc; /* time required for enhanced erase */ + unsigned short CurAPMvalues; /* current APM values */ + unsigned short mprc; /* master password revision code */ + unsigned short hw_config; /* hardware config (word 93) + * 15: Shall be ZERO + * 14: Shall be ONE + * 13: + * 12: + * 11: + * 10: + * 9: + * 8: + * 7: + * 6: + * 5: + * 4: + * 3: + * 2: + * 1: + * 0: Shall be ONE + */ + unsigned short acoustic; /* (word 94) + * 15:8 Vendor's recommended value + * 7:0 current value + */ + unsigned short msrqs; /* min stream request size */ + unsigned short sxfert; /* stream transfer time */ + unsigned short sal; /* stream access latency */ + unsigned int spg; /* stream performance granularity */ + unsigned long long lba_capacity_2;/* 48-bit total number of sectors */ + unsigned short words104_125[22];/* reserved words 104-125 */ + unsigned short last_lun; /* (word 126) */ + unsigned short word127; /* (word 127) Feature Set + * Removable Media Notification + * 15:2 reserved + * 1:0 00 = not supported + * 01 = supported + * 10 = reserved + * 11 = reserved + */ + unsigned short dlf; /* (word 128) + * device lock function + * 15:9 reserved + * 8 security level 1:max 0:high + * 7:6 reserved + * 5 enhanced erase + * 4 expire + * 3 frozen + * 2 locked + * 1 en/disabled + * 0 capability + */ + unsigned short csfo; /* (word 129) + * current set features options + * 15:4 reserved + * 3: auto reassign + * 2: reverting + * 1: read-look-ahead + * 0: write cache + */ + unsigned short words130_155[26];/* reserved vendor words 130-155 */ + unsigned short word156; /* reserved vendor word 156 */ + unsigned short words157_159[3];/* reserved vendor words 157-159 */ + unsigned short cfa_power; /* (word 160) CFA Power Mode + * 15 word 160 supported + * 14 reserved + * 13 + * 12 + * 11:0 + */ + unsigned short words161_175[15];/* Reserved for CFA */ + unsigned short words176_205[30];/* Current Media Serial Number */ + unsigned short words206_254[49];/* reserved words 206-254 */ + unsigned short integrity_word; /* (word 255) + * 15:8 Checksum + * 7:0 Signature + */ +}; + +/* + * IDE "nice" flags. These are used on a per drive basis to determine + * when to be nice and give more bandwidth to the other devices which + * share the same IDE bus. + */ +#define IDE_NICE_DSC_OVERLAP (0) /* per the DSC overlap protocol */ +#define IDE_NICE_ATAPI_OVERLAP (1) /* not supported yet */ +#define IDE_NICE_0 (2) /* when sure that it won't affect us */ +#define IDE_NICE_1 (3) /* when probably won't affect us much */ +#define IDE_NICE_2 (4) /* when we know it's on our expense */ + +#endif /* _LINUX_HDREG_H */ |