Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6:
  [SCSI] aic79xx: make driver respect nvram for IU and QAS settings
  [SCSI] don't attach ULD to Dell Universal Xport
  [SCSI] lpfc 8.3.3 : Update driver version to 8.3.3
  [SCSI] lpfc 8.3.3 : Add support for Target Reset handler entrypoint
  [SCSI] lpfc 8.3.3 : Fix a couple of spin_lock and memory issues and a crash
  [SCSI] lpfc 8.3.3 : FC/FCOE discovery fixes
  [SCSI] lpfc 8.3.3 : Fix various SLI-3 vs SLI-4 differences
  [SCSI] qla2xxx: Resolve a performance issue in interrupt
  [SCSI] cnic, bnx2i: Fix build failure when CONFIG_PCI is not set.
  [SCSI] nsp_cs: time_out reaches -1
  [SCSI] qla2xxx: fix printk format warnings
  [SCSI] ncr53c8xx: div reaches -1
  [SCSI] compat: don't perform unneeded copy in sg_io code
  [SCSI] zfcp: Update FC pass-through support
  [SCSI] zfcp: Add FC pass-through support
  [SCSI] FC Pass Thru support

5 files changed, 389 insertions, 2 deletions

diff --git a/include/scsi/Kbuild b/include/scsi/Kbuild
new file mode 100644
index 0000000..33b2750
--- /dev/null
+++ b/include/scsi/Kbuild
@@ -0,0 +1,4 @@
+header-y += scsi.h
+header-y += scsi_netlink.h
+header-y += scsi_netlink_fc.h
+header-y += scsi_bsg_fc.h
diff --git a/include/scsi/scsi_bsg_fc.h b/include/scsi/scsi_bsg_fc.h
new file mode 100644
index 0000000..a4b2333
--- /dev/null
+++ b/include/scsi/scsi_bsg_fc.h
@@ -0,0 +1,322 @@
+/*
+ *  FC Transport BSG Interface
+ *
+ *  Copyright (C) 2008   James Smart, Emulex Corporation
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef SCSI_BSG_FC_H
+#define SCSI_BSG_FC_H
+
+/*
+ * This file intended to be included by both kernel and user space
+ */
+
+#include <scsi/scsi.h>
+
+/*
+ * FC Transport SGIO v4 BSG Message Support
+ */
+
+/* Default BSG request timeout (in seconds) */
+#define FC_DEFAULT_BSG_TIMEOUT		(10 * HZ)
+
+
+/*
+ * Request Message Codes supported by the FC Transport
+ */
+
+/* define the class masks for the message codes */
+#define FC_BSG_CLS_MASK		0xF0000000	/* find object class */
+#define FC_BSG_HST_MASK		0x80000000	/* fc host class */
+#define FC_BSG_RPT_MASK		0x40000000	/* fc rport class */
+
+	/* fc_host Message Codes */
+#define FC_BSG_HST_ADD_RPORT		(FC_BSG_HST_MASK | 0x00000001)
+#define FC_BSG_HST_DEL_RPORT		(FC_BSG_HST_MASK | 0x00000002)
+#define FC_BSG_HST_ELS_NOLOGIN		(FC_BSG_HST_MASK | 0x00000003)
+#define FC_BSG_HST_CT			(FC_BSG_HST_MASK | 0x00000004)
+#define FC_BSG_HST_VENDOR		(FC_BSG_HST_MASK | 0x000000FF)
+
+	/* fc_rport Message Codes */
+#define FC_BSG_RPT_ELS			(FC_BSG_RPT_MASK | 0x00000001)
+#define FC_BSG_RPT_CT			(FC_BSG_RPT_MASK | 0x00000002)
+
+
+
+/*
+ * FC Address Identifiers in Message Structures :
+ *
+ *   Whenever a command payload contains a FC Address Identifier
+ *   (aka port_id), the value is effectively in big-endian
+ *   order, thus the array elements are decoded as follows:
+ *     element [0] is bits 23:16 of the FC Address Identifier
+ *     element [1] is bits 15:8 of the FC Address Identifier
+ *     element [2] is bits 7:0 of the FC Address Identifier
+ */
+
+
+/*
+ * FC Host Messages
+ */
+
+/* FC_BSG_HST_ADDR_PORT : */
+
+/* Request:
+ * This message requests the FC host to login to the remote port
+ * at the specified N_Port_Id.  The remote port is to be enumerated
+ * with the transport upon completion of the login.
+ */
+struct fc_bsg_host_add_rport {
+	uint8_t		reserved;
+
+	/* FC Address Identier of the remote port to login to */
+	uint8_t		port_id[3];
+};
+
+/* Response:
+ * There is no additional response data - fc_bsg_reply->result is sufficient
+ */
+
+
+/* FC_BSG_HST_DEL_RPORT : */
+
+/* Request:
+ * This message requests the FC host to remove an enumerated
+ * remote port and to terminate the login to it.
+ *
+ * Note: The driver is free to reject this request if it desires to
+ * remain logged in with the remote port.
+ */
+struct fc_bsg_host_del_rport {
+	uint8_t		reserved;
+
+	/* FC Address Identier of the remote port to logout of */
+	uint8_t		port_id[3];
+};
+
+/* Response:
+ * There is no additional response data - fc_bsg_reply->result is sufficient
+ */
+
+
+/* FC_BSG_HST_ELS_NOLOGIN : */
+
+/* Request:
+ * This message requests the FC_Host to send an ELS to a specific
+ * N_Port_ID. The host does not need to log into the remote port,
+ * nor does it need to enumerate the rport for further traffic
+ * (although, the FC host is free to do so if it desires).
+ */
+struct fc_bsg_host_els {
+	/*
+	 * ELS Command Code being sent (must be the same as byte 0
+	 * of the payload)
+	 */
+	uint8_t 	command_code;
+
+	/* FC Address Identier of the remote port to send the ELS to */
+	uint8_t		port_id[3];
+};
+
+/* Response:
+ */
+/* fc_bsg_ctels_reply->status values */
+#define FC_CTELS_STATUS_OK	0x00000000
+#define FC_CTELS_STATUS_REJECT	0x00000001
+#define FC_CTELS_STATUS_P_RJT	0x00000002
+#define FC_CTELS_STATUS_F_RJT	0x00000003
+#define FC_CTELS_STATUS_P_BSY	0x00000004
+#define FC_CTELS_STATUS_F_BSY	0x00000006
+struct fc_bsg_ctels_reply {
+	/*
+	 * Note: An ELS LS_RJT may be reported in 2 ways:
+	 *  a) A status of FC_CTELS_STATUS_OK is returned. The caller
+	 *     is to look into the ELS receive payload to determine
+	 *     LS_ACC or LS_RJT (by contents of word 0). The reject
+	 *     data will be in word 1.
+	 *  b) A status of FC_CTELS_STATUS_REJECT is returned, The
+	 *     rjt_data field will contain valid data.
+	 *
+	 * Note: ELS LS_ACC is determined by an FC_CTELS_STATUS_OK, and
+	 *   the receive payload word 0 indicates LS_ACC
+	 *   (e.g. value is 0x02xxxxxx).
+	 *
+	 * Note: Similarly, a CT Reject may be reported in 2 ways:
+	 *  a) A status of FC_CTELS_STATUS_OK is returned. The caller
+	 *     is to look into the CT receive payload to determine
+	 *     Accept or Reject (by contents of word 2). The reject
+	 *     data will be in word 3.
+	 *  b) A status of FC_CTELS_STATUS_REJECT is returned, The
+	 *     rjt_data field will contain valid data.
+	 *
+	 * Note: x_RJT/BSY status will indicae that the rjt_data field
+	 *   is valid and contains the reason/explanation values.
+	 */
+	uint32_t	status;		/* See FC_CTELS_STATUS_xxx */
+
+	/* valid if status is not FC_CTELS_STATUS_OK */
+	struct	{
+		uint8_t	action;		/* fragment_id for CT REJECT */
+		uint8_t	reason_code;
+		uint8_t	reason_explanation;
+		uint8_t	vendor_unique;
+	} rjt_data;
+};
+
+
+/* FC_BSG_HST_CT : */
+
+/* Request:
+ * This message requests that a CT Request be performed with the
+ * indicated N_Port_ID. The driver is responsible for logging in with
+ * the fabric and/or N_Port_ID, etc as per FC rules. This request does
+ * not mandate that the driver must enumerate the destination in the
+ * transport. The driver is allowed to decide whether to enumerate it,
+ * and whether to tear it down after the request.
+ */
+struct fc_bsg_host_ct {
+	uint8_t		reserved;
+
+	/* FC Address Identier of the remote port to send the ELS to */
+	uint8_t		port_id[3];
+
+	/*
+	 * We need words 0-2 of the generic preamble for the LLD's
+	 */
+	uint32_t	preamble_word0;	/* revision & IN_ID */
+	uint32_t	preamble_word1;	/* GS_Type, GS_SubType, Options, Rsvd */
+	uint32_t	preamble_word2;	/* Cmd Code, Max Size */
+
+};
+/* Response:
+ *
+ * The reply structure is an fc_bsg_ctels_reply structure
+ */
+
+
+/* FC_BSG_HST_VENDOR : */
+
+/* Request:
+ * Note: When specifying vendor_id, be sure to read the Vendor Type and ID
+ *   formatting requirements specified in scsi_netlink.h
+ */
+struct fc_bsg_host_vendor {
+	/*
+	 * Identifies the vendor that the message is formatted for. This
+	 * should be the recipient of the message.
+	 */
+	uint64_t vendor_id;
+
+	/* start of vendor command area */
+	uint32_t vendor_cmd[0];
+};
+
+/* Response:
+ */
+struct fc_bsg_host_vendor_reply {
+	/* start of vendor response area */
+	uint32_t vendor_rsp[0];
+};
+
+
+
+/*
+ * FC Remote Port Messages
+ */
+
+/* FC_BSG_RPT_ELS : */
+
+/* Request:
+ * This message requests that an ELS be performed with the rport.
+ */
+struct fc_bsg_rport_els {
+	/*
+	 * ELS Command Code being sent (must be the same as
+	 * byte 0 of the payload)
+	 */
+	uint8_t els_code;
+};
+
+/* Response:
+ *
+ * The reply structure is an fc_bsg_ctels_reply structure
+ */
+
+
+/* FC_BSG_RPT_CT : */
+
+/* Request:
+ * This message requests that a CT Request be performed with the rport.
+ */
+struct fc_bsg_rport_ct {
+	/*
+	 * We need words 0-2 of the generic preamble for the LLD's
+	 */
+	uint32_t	preamble_word0;	/* revision & IN_ID */
+	uint32_t	preamble_word1;	/* GS_Type, GS_SubType, Options, Rsvd */
+	uint32_t	preamble_word2;	/* Cmd Code, Max Size */
+};
+/* Response:
+ *
+ * The reply structure is an fc_bsg_ctels_reply structure
+ */
+
+
+
+
+/* request (CDB) structure of the sg_io_v4 */
+struct fc_bsg_request {
+	uint32_t msgcode;
+	union {
+		struct fc_bsg_host_add_rport	h_addrport;
+		struct fc_bsg_host_del_rport	h_delrport;
+		struct fc_bsg_host_els		h_els;
+		struct fc_bsg_host_ct		h_ct;
+		struct fc_bsg_host_vendor	h_vendor;
+
+		struct fc_bsg_rport_els		r_els;
+		struct fc_bsg_rport_ct		r_ct;
+	} rqst_data;
+};
+
+
+/* response (request sense data) structure of the sg_io_v4 */
+struct fc_bsg_reply {
+	/*
+	 * The completion result. Result exists in two forms:
+	 *  if negative, it is an -Exxx system errno value. There will
+	 *    be no further reply information supplied.
+	 *  else, it's the 4-byte scsi error result, with driver, host,
+	 *    msg and status fields. The per-msgcode reply structure
+	 *    will contain valid data.
+	 */
+	uint32_t result;
+
+	/* If there was reply_payload, how much was recevied ? */
+	uint32_t reply_payload_rcv_len;
+
+	union {
+		struct fc_bsg_host_vendor_reply		vendor_reply;
+
+		struct fc_bsg_ctels_reply		ctels_reply;
+	} reply_data;
+};
+
+
+#endif /* SCSI_BSG_FC_H */
+
diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
index d123ca8..b62a097 100644
--- a/include/scsi/scsi_host.h
+++ b/include/scsi/scsi_host.h
@@ -478,6 +478,15 @@ struct scsi_host_template {
 	 * module_init/module_exit.
 	 */
 	struct list_head legacy_hosts;
+
+	/*
+	 * Vendor Identifier associated with the host
+	 *
+	 * Note: When specifying vendor_id, be sure to read the
+	 *   Vendor Type and ID formatting requirements specified in
+	 *   scsi_netlink.h
+	 */
+	u64 vendor_id;
 };
 
 /*
diff --git a/include/scsi/scsi_transport_fc.h b/include/scsi/scsi_transport_fc.h
index 68a8d87..fc50bd6 100644
--- a/include/scsi/scsi_transport_fc.h
+++ b/include/scsi/scsi_transport_fc.h
@@ -33,7 +33,6 @@
 
 struct scsi_transport_template;
 
-
 /*
  * FC Port definitions - Following FC HBAAPI guidelines
  *
@@ -352,6 +351,7 @@ struct fc_rport {	/* aka fc_starget_attrs */
  	struct delayed_work fail_io_work;
  	struct work_struct stgt_delete_work;
 	struct work_struct rport_delete_work;
+	struct request_queue *rqst_q;	/* bsg support */
 } __attribute__((aligned(sizeof(unsigned long))));
 
 /* bit field values for struct fc_rport "flags" field: */
@@ -514,6 +514,9 @@ struct fc_host_attrs {
 	struct workqueue_struct *work_q;
 	char devloss_work_q_name[20];
 	struct workqueue_struct *devloss_work_q;
+
+	/* bsg support */
+	struct request_queue *rqst_q;
 };
 
 #define shost_to_fc_host(x) \
@@ -579,6 +582,47 @@ struct fc_host_attrs {
 	(((struct fc_host_attrs *)(x)->shost_data)->devloss_work_q)
 
 
+struct fc_bsg_buffer {
+	unsigned int payload_len;
+	int sg_cnt;
+	struct scatterlist *sg_list;
+};
+
+/* Values for fc_bsg_job->state_flags (bitflags) */
+#define FC_RQST_STATE_INPROGRESS	0
+#define FC_RQST_STATE_DONE		1
+
+struct fc_bsg_job {
+	struct Scsi_Host *shost;
+	struct fc_rport *rport;
+	struct device *dev;
+	struct request *req;
+	spinlock_t job_lock;
+	unsigned int state_flags;
+	unsigned int ref_cnt;
+	void (*job_done)(struct fc_bsg_job *);
+
+	struct fc_bsg_request *request;
+	struct fc_bsg_reply *reply;
+	unsigned int request_len;
+	unsigned int reply_len;
+	/*
+	 * On entry : reply_len indicates the buffer size allocated for
+	 * the reply.
+	 *
+	 * Upon completion : the message handler must set reply_len
+	 *  to indicates the size of the reply to be returned to the
+	 *  caller.
+	 */
+
+	/* DMA payloads for the request/response */
+	struct fc_bsg_buffer request_payload;
+	struct fc_bsg_buffer reply_payload;
+
+	void *dd_data;			/* Used for driver-specific storage */
+};
+
+
 /* The functions by which the transport class and the driver communicate */
 struct fc_function_template {
 	void    (*get_rport_dev_loss_tmo)(struct fc_rport *);
@@ -614,9 +658,14 @@ struct fc_function_template {
 	int     (* tsk_mgmt_response)(struct Scsi_Host *, u64, u64, int);
 	int     (* it_nexus_response)(struct Scsi_Host *, u64, int);
 
+	/* bsg support */
+	int	(*bsg_request)(struct fc_bsg_job *);
+	int	(*bsg_timeout)(struct fc_bsg_job *);
+
 	/* allocation lengths for host-specific data */
 	u32	 			dd_fcrport_size;
 	u32	 			dd_fcvport_size;
+	u32				dd_bsg_size;
 
 	/*
 	 * The driver sets these to tell the transport class it
@@ -737,7 +786,6 @@ fc_vport_set_state(struct fc_vport *vport, enum fc_vport_state new_state)
 	vport->vport_state = new_state;
 }
 
-
 struct scsi_transport_template *fc_attach_transport(
 			struct fc_function_template *);
 void fc_release_transport(struct scsi_transport_template *);
diff --git a/include/scsi/scsi_transport_spi.h b/include/scsi/scsi_transport_spi.h
index 286e962..7497a38 100644
--- a/include/scsi/scsi_transport_spi.h
+++ b/include/scsi/scsi_transport_spi.h
@@ -36,8 +36,10 @@ struct spi_transport_attrs {
 	unsigned int width:1;	/* 0 - narrow, 1 - wide */
 	unsigned int max_width:1;
 	unsigned int iu:1;	/* Information Units enabled */
+	unsigned int max_iu:1;
 	unsigned int dt:1;	/* DT clocking enabled */
 	unsigned int qas:1;	/* Quick Arbitration and Selection enabled */
+	unsigned int max_qas:1;
 	unsigned int wr_flow:1;	/* Write Flow control enabled */
 	unsigned int rd_strm:1;	/* Read streaming enabled */
 	unsigned int rti:1;	/* Retain Training Information */
@@ -77,8 +79,10 @@ struct spi_host_attrs {
 #define spi_width(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->width)
 #define spi_max_width(x) (((struct spi_transport_attrs *)&(x)->starget_data)->max_width)
 #define spi_iu(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->iu)
+#define spi_max_iu(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->max_iu)
 #define spi_dt(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->dt)
 #define spi_qas(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->qas)
+#define spi_max_qas(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->max_qas)
 #define spi_wr_flow(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->wr_flow)
 #define spi_rd_strm(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->rd_strm)
 #define spi_rti(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->rti)