The next round of scheduled OSS code removal

This patch contains the next round of scheduled OSS code removal.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

19 files changed, 0 insertions, 11360 deletions

diff --git a/sound/oss/Makefile b/sound/oss/Makefile
index 1200670..f883c4b 100644
--- a/sound/oss/Makefile
+++ b/sound/oss/Makefile
@@ -36,7 +36,6 @@ obj-$(CONFIG_SOUND_MSNDCLAS)	+= msnd.o msnd_classic.o
 obj-$(CONFIG_SOUND_MSNDPIN)	+= msnd.o msnd_pinnacle.o
 obj-$(CONFIG_SOUND_VWSND)	+= vwsnd.o
 obj-$(CONFIG_SOUND_ICH)		+= i810_audio.o ac97_codec.o
-obj-$(CONFIG_SOUND_ES1371)	+= es1371.o ac97_codec.o
 obj-$(CONFIG_SOUND_AU1550_AC97)	+= au1550_ac97.o ac97_codec.o
 obj-$(CONFIG_SOUND_TRIDENT)	+= trident.o ac97_codec.o
 obj-$(CONFIG_SOUND_BCM_CS4297A)	+= swarm_cs4297a.o
diff --git a/sound/oss/dmasound/Makefile b/sound/oss/dmasound/Makefile
index 4611636..3c15316 100644
--- a/sound/oss/dmasound/Makefile
+++ b/sound/oss/dmasound/Makefile
@@ -2,12 +2,6 @@
 # Makefile for the DMA sound driver
 #
 
-dmasound_pmac-y			+= dmasound_awacs.o \
-				   trans_16.o dac3550a.o tas_common.o \
-				   tas3001c.o tas3001c_tables.o \
-				   tas3004.o tas3004_tables.o
-
 obj-$(CONFIG_DMASOUND_ATARI)	+= dmasound_core.o dmasound_atari.o
-obj-$(CONFIG_DMASOUND_PMAC)	+= dmasound_core.o dmasound_pmac.o
 obj-$(CONFIG_DMASOUND_PAULA)	+= dmasound_core.o dmasound_paula.o
 obj-$(CONFIG_DMASOUND_Q40)	+= dmasound_core.o dmasound_q40.o
diff --git a/sound/oss/dmasound/awacs_defs.h b/sound/oss/dmasound/awacs_defs.h
deleted file mode 100644
index 2194f46..0000000
--- a/sound/oss/dmasound/awacs_defs.h
+++ /dev/null
@@ -1,251 +0,0 @@
-/*********************************************************/
-/* This file was written by someone, somewhere, sometime */
-/* And is released into the Public Domain                */
-/*********************************************************/
-
-#ifndef _AWACS_DEFS_H_
-#define _AWACS_DEFS_H_
-
-/*******************************/
-/* AWACs Audio Register Layout */
-/*******************************/
-
-struct awacs_regs {
-    unsigned	control;	/* Audio control register */
-    unsigned	pad0[3];
-    unsigned	codec_ctrl;	/* Codec control register */
-    unsigned	pad1[3];
-    unsigned	codec_stat;	/* Codec status register */
-    unsigned	pad2[3];
-    unsigned	clip_count;	/* Clipping count register */
-    unsigned	pad3[3];
-    unsigned	byteswap;	/* Data is little-endian if 1 */
-};
-
-/*******************/
-/* Audio Bit Masks */
-/*******************/
-
-/* Audio Control Reg Bit Masks */
-/* ----- ------- --- --- ----- */
-#define MASK_ISFSEL	(0xf)		/* Input SubFrame Select */
-#define MASK_OSFSEL	(0xf << 4)	/* Output SubFrame Select */
-#define MASK_RATE	(0x7 << 8)	/* Sound Rate */
-#define MASK_CNTLERR	(0x1 << 11)	/* Error */
-#define MASK_PORTCHG	(0x1 << 12)	/* Port Change */
-#define MASK_IEE	(0x1 << 13)	/* Enable Interrupt on Error */
-#define MASK_IEPC	(0x1 << 14)	/* Enable Interrupt on Port Change */
-#define MASK_SSFSEL	(0x3 << 15)	/* Status SubFrame Select */
-
-/* Audio Codec Control Reg Bit Masks */
-/* ----- ----- ------- --- --- ----- */
-#define MASK_NEWECMD	(0x1 << 24)	/* Lock: don't write to reg when 1 */
-#define MASK_EMODESEL	(0x3 << 22)	/* Send info out on which frame? */
-#define MASK_EXMODEADDR	(0x3ff << 12)	/* Extended Mode Address -- 10 bits */
-#define MASK_EXMODEDATA	(0xfff)		/* Extended Mode Data -- 12 bits */
-
-/* Audio Codec Control Address Values / Masks */
-/* ----- ----- ------- ------- ------ - ----- */
-#define MASK_ADDR0	(0x0 << 12)	/* Expanded Data Mode Address 0 */
-#define MASK_ADDR_MUX	MASK_ADDR0	/* Mux Control */
-#define MASK_ADDR_GAIN	MASK_ADDR0
-
-#define MASK_ADDR1	(0x1 << 12)	/* Expanded Data Mode Address 1 */
-#define MASK_ADDR_MUTE	MASK_ADDR1
-#define MASK_ADDR_RATE	MASK_ADDR1
-
-#define MASK_ADDR2	(0x2 << 12)	/* Expanded Data Mode Address 2 */
-#define MASK_ADDR_VOLA	MASK_ADDR2	/* Volume Control A -- Headphones */
-#define MASK_ADDR_VOLHD MASK_ADDR2
-
-#define MASK_ADDR4	(0x4 << 12)	/* Expanded Data Mode Address 4 */
-#define MASK_ADDR_VOLC	MASK_ADDR4	/* Volume Control C -- Speaker */
-#define MASK_ADDR_VOLSPK MASK_ADDR4
-
-/* additional registers of screamer */
-#define MASK_ADDR5	(0x5 << 12)	/* Expanded Data Mode Address 5 */
-#define MASK_ADDR6	(0x6 << 12)	/* Expanded Data Mode Address 6 */
-#define MASK_ADDR7	(0x7 << 12)	/* Expanded Data Mode Address 7 */
-
-/* Address 0 Bit Masks & Macros */
-/* ------- - --- ----- - ------ */
-#define MASK_GAINRIGHT	(0xf)		/* Gain Right Mask */
-#define MASK_GAINLEFT	(0xf << 4)	/* Gain Left Mask */
-#define MASK_GAINLINE	(0x1 << 8)	/* Disable Mic preamp */
-#define MASK_GAINMIC	(0x0 << 8)	/* Enable Mic preamp */
-
-#define MASK_MUX_CD	(0x1 << 9)	/* Select CD in MUX */
-#define MASK_MUX_MIC	(0x1 << 10)	/* Select Mic in MUX */
-#define MASK_MUX_AUDIN	(0x1 << 11)	/* Select Audio In in MUX */
-#define MASK_MUX_LINE	MASK_MUX_AUDIN
-
-#define GAINRIGHT(x)	((x) & MASK_GAINRIGHT)
-#define GAINLEFT(x)	(((x) << 4) & MASK_GAINLEFT)
-
-#define DEF_CD_GAIN 0x00bb
-#define DEF_MIC_GAIN 0x00cc
-
-/* Address 1 Bit Masks */
-/* ------- - --- ----- */
-#define MASK_ADDR1RES1	(0x3)		/* Reserved */
-#define MASK_RECALIBRATE (0x1 << 2)	/* Recalibrate */
-#define MASK_SAMPLERATE	(0x7 << 3)	/* Sample Rate: */
-#define MASK_LOOPTHRU	(0x1 << 6)	/* Loopthrough Enable */
-#define MASK_CMUTE	(0x1 << 7)	/* Output C (Speaker) Mute when 1 */
-#define MASK_SPKMUTE	MASK_CMUTE
-#define MASK_ADDR1RES2	(0x1 << 8)	/* Reserved */
-#define MASK_AMUTE	(0x1 << 9)	/* Output A (Headphone) Mute when 1 */
-#define MASK_HDMUTE	MASK_AMUTE
-#define MASK_PAROUT0	(0x1 << 10)	/* Parallel Output 0 */
-#define MASK_PAROUT1	(0x2 << 10)	/* Parallel Output 1 */
-
-#define MASK_MIC_BOOST  (0x4)           /* screamer mic boost */
-
-#define SAMPLERATE_48000	(0x0 << 3)	/* 48 or 44.1 kHz */
-#define SAMPLERATE_32000	(0x1 << 3)	/* 32 or 29.4 kHz */
-#define SAMPLERATE_24000	(0x2 << 3)	/* 24 or 22.05 kHz */
-#define SAMPLERATE_19200	(0x3 << 3)	/* 19.2 or 17.64 kHz */
-#define SAMPLERATE_16000	(0x4 << 3)	/* 16 or 14.7 kHz */
-#define SAMPLERATE_12000	(0x5 << 3)	/* 12 or 11.025 kHz */
-#define SAMPLERATE_9600		(0x6 << 3)	/* 9.6 or 8.82 kHz */
-#define SAMPLERATE_8000		(0x7 << 3)	/* 8 or 7.35 kHz */
-
-/* Address 2 & 4 Bit Masks & Macros */
-/* ------- - - - --- ----- - ------ */
-#define MASK_OUTVOLRIGHT (0xf)		/* Output Right Volume */
-#define MASK_ADDR2RES1	(0x2 << 4)	/* Reserved */
-#define MASK_ADDR4RES1	MASK_ADDR2RES1
-#define MASK_OUTVOLLEFT	(0xf << 6)	/* Output Left Volume */
-#define MASK_ADDR2RES2	(0x2 << 10)	/* Reserved */
-#define MASK_ADDR4RES2	MASK_ADDR2RES2
-
-#define VOLRIGHT(x)	(((~(x)) & MASK_OUTVOLRIGHT))
-#define VOLLEFT(x)	(((~(x)) << 6) & MASK_OUTVOLLEFT)
-
-/* Audio Codec Status Reg Bit Masks */
-/* ----- ----- ------ --- --- ----- */
-#define MASK_EXTEND	(0x1 << 23)	/* Extend */
-#define MASK_VALID	(0x1 << 22)	/* Valid Data? */
-#define MASK_OFLEFT	(0x1 << 21)	/* Overflow Left */
-#define MASK_OFRIGHT	(0x1 << 20)	/* Overflow Right */
-#define MASK_ERRCODE	(0xf << 16)	/* Error Code */
-#define MASK_REVISION	(0xf << 12)	/* Revision Number */
-#define MASK_MFGID	(0xf << 8)	/* Mfg. ID */
-#define MASK_CODSTATRES	(0xf << 4)	/* bits 4 - 7 reserved */
-#define MASK_INPPORT	(0xf)		/* Input Port */
-#define MASK_HDPCONN	8		/* headphone plugged in */
-
-/* Clipping Count Reg Bit Masks */
-/* -------- ----- --- --- ----- */
-#define MASK_CLIPLEFT	(0xff << 7)	/* Clipping Count, Left Channel */
-#define MASK_CLIPRIGHT	(0xff)		/* Clipping Count, Right Channel */
-
-/* DBDMA ChannelStatus Bit Masks */
-/* ----- ------------- --- ----- */
-#define MASK_CSERR	(0x1 << 7)	/* Error */
-#define MASK_EOI	(0x1 << 6)	/* End of Input -- only for Input Channel */
-#define MASK_CSUNUSED	(0x1f << 1)	/* bits 1-5 not used */
-#define MASK_WAIT	(0x1)		/* Wait */
-
-/* Various Rates */
-/* ------- ----- */
-#define RATE_48000	(0x0 << 8)	/* 48 kHz */
-#define RATE_44100	(0x0 << 8)	/* 44.1 kHz */
-#define RATE_32000	(0x1 << 8)	/* 32 kHz */
-#define RATE_29400	(0x1 << 8)	/* 29.4 kHz */
-#define RATE_24000	(0x2 << 8)	/* 24 kHz */
-#define RATE_22050	(0x2 << 8)	/* 22.05 kHz */
-#define RATE_19200	(0x3 << 8)	/* 19.2 kHz */
-#define RATE_17640	(0x3 << 8)	/* 17.64 kHz */
-#define RATE_16000	(0x4 << 8)	/* 16 kHz */
-#define RATE_14700	(0x4 << 8)	/* 14.7 kHz */
-#define RATE_12000	(0x5 << 8)	/* 12 kHz */
-#define RATE_11025	(0x5 << 8)	/* 11.025 kHz */
-#define RATE_9600	(0x6 << 8)	/* 9.6 kHz */
-#define RATE_8820	(0x6 << 8)	/* 8.82 kHz */
-#define RATE_8000	(0x7 << 8)	/* 8 kHz */
-#define RATE_7350	(0x7 << 8)	/* 7.35 kHz */
-
-#define RATE_LOW	1	/* HIGH = 48kHz, etc;  LOW = 44.1kHz, etc. */
-
-/*******************/
-/* Burgundy values */
-/*******************/
-
-#define MASK_ADDR_BURGUNDY_INPSEL21 (0x11 << 12)
-#define MASK_ADDR_BURGUNDY_INPSEL3 (0x12 << 12)
-
-#define MASK_ADDR_BURGUNDY_GAINCH1 (0x13 << 12)
-#define MASK_ADDR_BURGUNDY_GAINCH2 (0x14 << 12)
-#define MASK_ADDR_BURGUNDY_GAINCH3 (0x15 << 12)
-#define MASK_ADDR_BURGUNDY_GAINCH4 (0x16 << 12)
-
-#define MASK_ADDR_BURGUNDY_VOLCH1 (0x20 << 12)
-#define MASK_ADDR_BURGUNDY_VOLCH2 (0x21 << 12)
-#define MASK_ADDR_BURGUNDY_VOLCH3 (0x22 << 12)
-#define MASK_ADDR_BURGUNDY_VOLCH4 (0x23 << 12)
-
-#define MASK_ADDR_BURGUNDY_OUTPUTSELECTS (0x2B << 12)
-#define MASK_ADDR_BURGUNDY_OUTPUTENABLES (0x2F << 12)
-
-#define MASK_ADDR_BURGUNDY_MASTER_VOLUME (0x30 << 12)
-
-#define MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES (0x60 << 12)
-
-#define MASK_ADDR_BURGUNDY_ATTENSPEAKER (0x62 << 12)
-#define MASK_ADDR_BURGUNDY_ATTENLINEOUT (0x63 << 12)
-#define MASK_ADDR_BURGUNDY_ATTENHP (0x64 << 12)
-
-#define MASK_ADDR_BURGUNDY_VOLCD (MASK_ADDR_BURGUNDY_VOLCH1)
-#define MASK_ADDR_BURGUNDY_VOLLINE (MASK_ADDR_BURGUNDY_VOLCH2)
-#define MASK_ADDR_BURGUNDY_VOLMIC (MASK_ADDR_BURGUNDY_VOLCH3)
-#define MASK_ADDR_BURGUNDY_VOLMODEM (MASK_ADDR_BURGUNDY_VOLCH4)
-
-#define MASK_ADDR_BURGUNDY_GAINCD (MASK_ADDR_BURGUNDY_GAINCH1)
-#define MASK_ADDR_BURGUNDY_GAINLINE (MASK_ADDR_BURGUNDY_GAINCH2)
-#define MASK_ADDR_BURGUNDY_GAINMIC (MASK_ADDR_BURGUNDY_GAINCH3)
-#define MASK_ADDR_BURGUNDY_GAINMODEM (MASK_ADDR_BURGUNDY_VOLCH4)
-
-
-/* These are all default values for the burgundy */
-#define DEF_BURGUNDY_INPSEL21 (0xAA)
-#define DEF_BURGUNDY_INPSEL3 (0x0A)
-
-#define DEF_BURGUNDY_GAINCD (0x33)
-#define DEF_BURGUNDY_GAINLINE (0x44)
-#define DEF_BURGUNDY_GAINMIC (0x44)
-#define DEF_BURGUNDY_GAINMODEM (0x06)
-
-/* Remember: lowest volume here is 0x9b */
-#define DEF_BURGUNDY_VOLCD (0xCCCCCCCC)
-#define DEF_BURGUNDY_VOLLINE (0x00000000)
-#define DEF_BURGUNDY_VOLMIC (0x00000000)
-#define DEF_BURGUNDY_VOLMODEM (0xCCCCCCCC)
-
-#define DEF_BURGUNDY_OUTPUTSELECTS (0x010f010f)
-#define DEF_BURGUNDY_OUTPUTENABLES (0x0A)
-
-#define DEF_BURGUNDY_MASTER_VOLUME (0xFFFFFFFF)
-
-#define DEF_BURGUNDY_MORE_OUTPUTENABLES (0x7E)
-
-#define DEF_BURGUNDY_ATTENSPEAKER (0x44)
-#define DEF_BURGUNDY_ATTENLINEOUT (0xCC)
-#define DEF_BURGUNDY_ATTENHP (0xCC)
-
-/*********************/
-/* i2s layout values */
-/*********************/
-
-#define I2S_REG_INT_CTL			0x00
-#define I2S_REG_SERIAL_FORMAT		0x10
-#define I2S_REG_CODEC_MSG_OUT		0x20
-#define I2S_REG_CODEC_MSG_IN		0x30
-#define I2S_REG_FRAME_COUNT		0x40
-#define I2S_REG_FRAME_MATCH		0x50
-#define I2S_REG_DATAWORD_SIZES		0x60
-#define I2S_REG_PEAKLEVEL_SEL		0x70
-#define I2S_REG_PEAKLEVEL_IN0		0x80
-#define I2S_REG_PEAKLEVEL_IN1		0x90
-
-#endif /* _AWACS_DEFS_H_ */
diff --git a/sound/oss/dmasound/dac3550a.c b/sound/oss/dmasound/dac3550a.c
deleted file mode 100644
index 0f0d03a..0000000
--- a/sound/oss/dmasound/dac3550a.c
+++ /dev/null
@@ -1,209 +0,0 @@
-/*
- * Driver for the i2c/i2s based DAC3550a sound chip used
- * on some Apple iBooks. Also known as "DACA".
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License.  See the file COPYING in the main directory of this archive
- *  for more details.
- */
-
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/proc_fs.h>
-#include <linux/ioport.h>
-#include <linux/sysctl.h>
-#include <linux/types.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <asm/uaccess.h>
-#include <asm/errno.h>
-#include <asm/io.h>
-
-#include "dmasound.h"
-
-/* FYI: This code was derived from the tas3001c.c Texas/Tumbler mixer
- * control code, as well as info derived from the AppleDACAAudio driver
- * from Darwin CVS (main thing I derived being register numbers and 
- * values, as well as when to make the calls). */
-
-#define I2C_DRIVERID_DACA (0xFDCB)
-
-#define DACA_VERSION	"0.1"
-#define DACA_DATE "20010930"
-
-static int cur_left_vol;
-static int cur_right_vol;
-static struct i2c_client *daca_client;
-
-static int daca_attach_adapter(struct i2c_adapter *adapter);
-static int daca_detect_client(struct i2c_adapter *adapter, int address);
-static int daca_detach_client(struct i2c_client *client);
-
-struct i2c_driver daca_driver = {  
-	.driver = {
-		.name		= "DAC3550A driver  V " DACA_VERSION,
-	},
-	.id			= I2C_DRIVERID_DACA,
-	.attach_adapter		= daca_attach_adapter,
-	.detach_client		= daca_detach_client,
-};
-
-#define VOL_MAX ((1<<20) - 1)
-
-void daca_get_volume(uint * left_vol, uint  *right_vol)
-{
-	*left_vol = cur_left_vol >> 5;
-	*right_vol = cur_right_vol >> 5;
-}
-
-int daca_set_volume(uint left_vol, uint right_vol)
-{
-	unsigned short voldata;
-  
-	if (!daca_client)
-		return -1;
-
-	/* Derived from experience, not from any specific values */
-	left_vol <<= 5;
-	right_vol <<= 5;
-
-	if (left_vol > VOL_MAX)
-		left_vol = VOL_MAX;
-	if (right_vol > VOL_MAX)
-		right_vol = VOL_MAX;
-
-	voldata = ((left_vol >> 14)  & 0x3f) << 8;
-	voldata |= (right_vol >> 14)  & 0x3f;
-  
-	if (i2c_smbus_write_word_data(daca_client, 2, voldata) < 0) {
-		printk("daca: failed to set volume \n");
-		return -1; 
-	}
-
-	cur_left_vol = left_vol;
-	cur_right_vol = right_vol;
-  
-	return 0;
-}
-
-int daca_leave_sleep(void)
-{
-	if (!daca_client)
-		return -1;
-  
-	/* Do a short sleep, just to make sure I2C bus is awake and paying
-	 * attention to us
-	 */
-	msleep(20);
-	/* Write the sample rate reg the value it needs */
-	i2c_smbus_write_byte_data(daca_client, 1, 8);
-	daca_set_volume(cur_left_vol >> 5, cur_right_vol >> 5);
-	/* Another short delay, just to make sure the other I2C bus writes
-	 * have taken...
-	 */
-	msleep(20);
-	/* Write the global config reg - invert right power amp,
-	 * DAC on, use 5-volt mode */
-	i2c_smbus_write_byte_data(daca_client, 3, 0x45);
-
-	return 0;
-}
-
-int daca_enter_sleep(void)
-{
-	if (!daca_client)
-		return -1;
-
-	i2c_smbus_write_byte_data(daca_client, 1, 8);
-	daca_set_volume(cur_left_vol >> 5, cur_right_vol >> 5);
-
-	/* Write the global config reg - invert right power amp,
-	 * DAC on, enter low-power mode, use 5-volt mode
-	 */
-	i2c_smbus_write_byte_data(daca_client, 3, 0x65);
-
-	return 0;
-}
-
-static int daca_attach_adapter(struct i2c_adapter *adapter)
-{
-	if (!strncmp(adapter->name, "mac-io", 6))
-		daca_detect_client(adapter, 0x4d);
-	return 0;
-}
-
-static int daca_init_client(struct i2c_client * new_client)
-{
-	/* 
-	 * Probe is not working with the current i2c-keywest
-	 * driver. We try to use addr 0x4d on each adapters
-	 * instead, by setting the format register.
-	 * 
-	 * FIXME: I'm sure that can be obtained from the
-	 * device-tree. --BenH.
-	 */
-  
-	/* Write the global config reg - invert right power amp,
-	 * DAC on, use 5-volt mode
-	 */
-	if (i2c_smbus_write_byte_data(new_client, 3, 0x45))
-		return -1;
-
-	i2c_smbus_write_byte_data(new_client, 1, 8);
-	daca_client = new_client;
-	daca_set_volume(15000, 15000);
-
-	return 0;
-}
-
-static int daca_detect_client(struct i2c_adapter *adapter, int address)
-{
-	const char *client_name = "DAC 3550A Digital Equalizer";
-	struct i2c_client *new_client;
-	int rc = -ENODEV;
-
-	new_client = kzalloc(sizeof(*new_client), GFP_KERNEL);
-	if (!new_client)
-		return -ENOMEM;
-
-	new_client->addr = address;
-	new_client->adapter = adapter;
-	new_client->driver = &daca_driver;
-	new_client->flags = 0;
-	strcpy(new_client->name, client_name);
-
-	if (daca_init_client(new_client))
-		goto bail;
-
-	/* Tell the i2c layer a new client has arrived */
-	if (i2c_attach_client(new_client))
-		goto bail;
-
-	return 0;
- bail:
-	kfree(new_client);
-	return rc;
-}
-
-
-static int daca_detach_client(struct i2c_client *client)
-{
-	if (client == daca_client)
-		daca_client = NULL;
-
-  	i2c_detach_client(client);
-	kfree(client);
-	return 0;
-}
-
-void daca_cleanup(void)
-{
-	i2c_del_driver(&daca_driver);
-}
-
-int daca_init(void)
-{
-	printk("dac3550a driver version %s (%s)\n",DACA_VERSION,DACA_DATE);
-	return i2c_add_driver(&daca_driver);
-}
diff --git a/sound/oss/dmasound/dmasound.h b/sound/oss/dmasound/dmasound.h
index 25dd5a3..d978b00 100644
--- a/sound/oss/dmasound/dmasound.h
+++ b/sound/oss/dmasound/dmasound.h
@@ -59,7 +59,6 @@ static inline int ioctl_return(int __user *addr, int value)
      */
 
 #undef HAS_8BIT_TABLES
-#undef HAS_RECORD
 
 #if defined(CONFIG_DMASOUND_ATARI) || defined(CONFIG_DMASOUND_ATARI_MODULE) ||\
     defined(CONFIG_DMASOUND_PAULA) || defined(CONFIG_DMASOUND_PAULA_MODULE) ||\
@@ -83,10 +82,6 @@ static inline int ioctl_return(int __user *addr, int value)
 #define DEFAULT_N_BUFFERS 4
 #define DEFAULT_BUFF_SIZE (1<<15)
 
-#if defined(CONFIG_DMASOUND_PMAC) || defined(CONFIG_DMASOUND_PMAC_MODULE)
-#define HAS_RECORD
-#endif
-
     /*
      *  Initialization
      */
@@ -168,9 +163,6 @@ struct sound_settings {
     SETTINGS soft;	/* software settings */
     SETTINGS dsp;	/* /dev/dsp default settings */
     TRANS *trans_write;	/* supported translations */
-#ifdef HAS_RECORD
-    TRANS *trans_read;	/* supported translations */
-#endif
     int volume_left;	/* volume (range is machine dependent) */
     int volume_right;
     int bass;		/* tone (range is machine dependent) */
@@ -253,11 +245,6 @@ struct sound_queue {
 extern struct sound_queue dmasound_write_sq;
 #define write_sq	dmasound_write_sq
 
-#ifdef HAS_RECORD
-extern struct sound_queue dmasound_read_sq;
-#define read_sq		dmasound_read_sq
-#endif
-
 extern int dmasound_catchRadius;
 #define catchRadius	dmasound_catchRadius
 
diff --git a/sound/oss/dmasound/dmasound_awacs.c b/sound/oss/dmasound/dmasound_awacs.c
deleted file mode 100644
index 8f63880..0000000
--- a/sound/oss/dmasound/dmasound_awacs.c
+++ /dev/null
@@ -1,3215 +0,0 @@
-/*
- *  linux/sound/oss/dmasound/dmasound_awacs.c
- *
- *  PowerMac `AWACS' and `Burgundy' DMA Sound Driver
- *  with some limited support for DACA & Tumbler
- *
- *  See linux/sound/oss/dmasound/dmasound_core.c for copyright and
- *  history prior to 2001/01/26.
- *
- *	26/01/2001 ed 0.1 Iain Sandoe
- *		- added version info.
- *		- moved dbdma command buffer allocation to PMacXXXSqSetup()
- *		- fixed up beep dbdma cmd buffers
- *
- *	08/02/2001 [0.2]
- *		- make SNDCTL_DSP_GETFMTS return the correct info for the h/w
- *		- move soft format translations to a separate file
- *		- [0.3] make SNDCTL_DSP_GETCAPS return correct info.
- *		- [0.4] more informative machine name strings.
- *		- [0.5]
- *		- record changes.
- *		- made the default_hard/soft entries.
- *	04/04/2001 [0.6]
- *		- minor correction to bit assignments in awacs_defs.h
- *		- incorporate mixer changes from 2.2.x back-port.
- *		- take out passthru as a rec input (it isn't).
- *              - make Input Gain slider work the 'right way up'.
- *              - try to make the mixer sliders more logical - so now the
- *                input selectors are just two-state (>50% == ON) and the
- *                Input Gain slider handles the rest of the gain issues.
- *              - try to pick slider representations that most closely match
- *                the actual use - e.g. IGain for input gain... 
- *              - first stab at over/under-run detection.
- *		- minor cosmetic changes to IRQ identification.
- *		- fix bug where rates > max would be reported as supported.
- *              - first stab at over/under-run detection.
- *              - make use of i2c for mixer settings conditional on perch
- *                rather than cuda (some machines without perch have cuda).
- *              - fix bug where TX stops when dbdma status comes up "DEAD"
- *		  so far only reported on PowerComputing clones ... but.
- *		- put in AWACS/Screamer register write timeouts.
- *		- part way to partitioning the init() stuff
- *		- first pass at 'tumbler' stuff (not support - just an attempt
- *		  to allow the driver to load on new G4s).
- *      01/02/2002 [0.7] - BenH
- *	        - all sort of minor bits went in since the latest update, I
- *	          bumped the version number for that reason
- *
- *      07/26/2002 [0.8] - BenH
- *	        - More minor bits since last changelog (I should be more careful
- *	          with those)
- *	        - Support for snapper & better tumbler integration by Toby Sargeant
- *	        - Headphone detect for scremer by Julien Blache
- *	        - More tumbler fixed by Andreas Schwab
- *	11/29/2003 [0.8.1] - Renzo Davoli (King Enzo)
- *		- Support for Snapper line in
- *		- snapper input resampling (for rates < 44100)
- *		- software line gain control
- */
-
-/* GENERAL FIXME/TODO: check that the assumptions about what is written to
-   mac-io is valid for DACA & Tumbler.
-
-   This driver is in bad need of a rewrite. The dbdma code has to be split,
-   some proper device-tree parsing code has to be written, etc...
-*/
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/soundcard.h>
-#include <linux/adb.h>
-#include <linux/nvram.h>
-#include <linux/tty.h>
-#include <linux/vt_kern.h>
-#include <linux/spinlock.h>
-#include <linux/kmod.h>
-#include <linux/interrupt.h>
-#include <linux/input.h>
-#include <linux/mutex.h>
-#ifdef CONFIG_ADB_CUDA
-#include <linux/cuda.h>
-#endif
-#ifdef CONFIG_ADB_PMU
-#include <linux/pmu.h>
-#endif
-
-#include <asm/uaccess.h>
-#include <asm/prom.h>
-#include <asm/machdep.h>
-#include <asm/io.h>
-#include <asm/dbdma.h>
-#include <asm/pmac_feature.h>
-#include <asm/irq.h>
-#include <asm/nvram.h>
-
-#include "awacs_defs.h"
-#include "dmasound.h"
-#include "tas3001c.h"
-#include "tas3004.h"
-#include "tas_common.h"
-
-#define DMASOUND_AWACS_REVISION	0
-#define DMASOUND_AWACS_EDITION	7
-
-#define AWACS_SNAPPER   110	/* fake revision # for snapper */
-#define AWACS_BURGUNDY	100	/* fake revision # for burgundy */
-#define AWACS_TUMBLER    90	/* fake revision # for tumbler */
-#define AWACS_DACA	 80	/* fake revision # for daca (ibook) */
-#define AWACS_AWACS       2     /* holding revision for AWACS */
-#define AWACS_SCREAMER    3     /* holding revision for Screamer */
-/*
- * Interrupt numbers and addresses, & info obtained from the device tree.
- */
-static int awacs_irq, awacs_tx_irq, awacs_rx_irq;
-static volatile struct awacs_regs __iomem *awacs;
-static volatile u32 __iomem *i2s;
-static volatile struct dbdma_regs __iomem *awacs_txdma, *awacs_rxdma;
-static int awacs_rate_index;
-static int awacs_subframe;
-static struct device_node* awacs_node;
-static struct device_node* i2s_node;
-static struct resource awacs_rsrc[3];
-
-static char awacs_name[64];
-static int awacs_revision;
-static int awacs_sleeping;
-static DEFINE_MUTEX(dmasound_mutex);
-
-static int sound_device_id;		/* exists after iMac revA */
-static int hw_can_byteswap = 1 ;	/* most pmac sound h/w can */
-
-/* model info */
-/* To be replaced with better interaction with pmac_feature.c */
-static int is_pbook_3X00;
-static int is_pbook_g3;
-
-/* expansion info */
-static int has_perch;
-static int has_ziva;
-
-/* for earlier powerbooks which need fiddling with mac-io to enable
- * cd etc.
-*/
-static unsigned char __iomem *latch_base;
-static unsigned char __iomem *macio_base;
-
-/*
- * Space for the DBDMA command blocks.
- */
-static void *awacs_tx_cmd_space;
-static volatile struct dbdma_cmd *awacs_tx_cmds;
-static int number_of_tx_cmd_buffers;
-
-static void *awacs_rx_cmd_space;
-static volatile struct dbdma_cmd *awacs_rx_cmds;
-static int number_of_rx_cmd_buffers;
-
-/*
- * Cached values of AWACS registers (we can't read them).
- * Except on the burgundy (and screamer). XXX
- */
-
-int awacs_reg[8];
-int awacs_reg1_save;
-
-/* tracking values for the mixer contents
-*/
-
-static int spk_vol;
-static int line_vol;
-static int passthru_vol;
-
-static int ip_gain;           /* mic preamp settings */
-static int rec_lev = 0x4545 ; /* default CD gain 69 % */
-static int mic_lev;
-static int cd_lev = 0x6363 ; /* 99 % */
-static int line_lev;
-
-static int hdp_connected;
-
-/*
- * Stuff for outputting a beep.  The values range from -327 to +327
- * so we can multiply by an amplitude in the range 0..100 to get a
- * signed short value to put in the output buffer.
- */
-static short beep_wform[256] = {
-	0,	40,	79,	117,	153,	187,	218,	245,
-	269,	288,	304,	316,	323,	327,	327,	324,
-	318,	310,	299,	288,	275,	262,	249,	236,
-	224,	213,	204,	196,	190,	186,	183,	182,
-	182,	183,	186,	189,	192,	196,	200,	203,
-	206,	208,	209,	209,	209,	207,	204,	201,
-	197,	193,	188,	183,	179,	174,	170,	166,
-	163,	161,	160,	159,	159,	160,	161,	162,
-	164,	166,	168,	169,	171,	171,	171,	170,
-	169,	167,	163,	159,	155,	150,	144,	139,
-	133,	128,	122,	117,	113,	110,	107,	105,
-	103,	103,	103,	103,	104,	104,	105,	105,
-	105,	103,	101,	97,	92,	86,	78,	68,
-	58,	45,	32,	18,	3,	-11,	-26,	-41,
-	-55,	-68,	-79,	-88,	-95,	-100,	-102,	-102,
-	-99,	-93,	-85,	-75,	-62,	-48,	-33,	-16,
-	0,	16,	33,	48,	62,	75,	85,	93,
-	99,	102,	102,	100,	95,	88,	79,	68,
-	55,	41,	26,	11,	-3,	-18,	-32,	-45,
-	-58,	-68,	-78,	-86,	-92,	-97,	-101,	-103,
-	-105,	-105,	-105,	-104,	-104,	-103,	-103,	-103,
-	-103,	-105,	-107,	-110,	-113,	-117,	-122,	-128,
-	-133,	-139,	-144,	-150,	-155,	-159,	-163,	-167,
-	-169,	-170,	-171,	-171,	-171,	-169,	-168,	-166,
-	-164,	-162,	-161,	-160,	-159,	-159,	-160,	-161,
-	-163,	-166,	-170,	-174,	-179,	-183,	-188,	-193,
-	-197,	-201,	-204,	-207,	-209,	-209,	-209,	-208,
-	-206,	-203,	-200,	-196,	-192,	-189,	-186,	-183,
-	-182,	-182,	-183,	-186,	-190,	-196,	-204,	-213,
-	-224,	-236,	-249,	-262,	-275,	-288,	-299,	-310,
-	-318,	-324,	-327,	-327,	-323,	-316,	-304,	-288,
-	-269,	-245,	-218,	-187,	-153,	-117,	-79,	-40,
-};
-
-/* beep support */
-#define BEEP_SRATE	22050	/* 22050 Hz sample rate */
-#define BEEP_BUFLEN	512
-#define BEEP_VOLUME	15	/* 0 - 100 */
-
-static int beep_vol = BEEP_VOLUME;
-static int beep_playing;
-static int awacs_beep_state;
-static short *beep_buf;
-static void *beep_dbdma_cmd_space;
-static volatile struct dbdma_cmd *beep_dbdma_cmd;
-
-/* Burgundy functions */
-static void awacs_burgundy_wcw(unsigned addr,unsigned newval);
-static unsigned awacs_burgundy_rcw(unsigned addr);
-static void awacs_burgundy_write_volume(unsigned address, int volume);
-static int awacs_burgundy_read_volume(unsigned address);
-static void awacs_burgundy_write_mvolume(unsigned address, int volume);
-static int awacs_burgundy_read_mvolume(unsigned address);
-
-/* we will allocate a single 'emergency' dbdma cmd block to use if the
-   tx status comes up "DEAD".  This happens on some PowerComputing Pmac
-   clones, either owing to a bug in dbdma or some interaction between
-   IDE and sound.  However, this measure would deal with DEAD status if
-   if appeared elsewhere.
-
-   for the sake of memory efficiency we'll allocate this cmd as part of
-   the beep cmd stuff.
-*/
-
-static volatile struct dbdma_cmd *emergency_dbdma_cmd;
-
-#ifdef CONFIG_PM
-/*
- * Stuff for restoring after a sleep.
- */
-static void awacs_sleep_notify(struct pmu_sleep_notifier *self, int when);
-struct pmu_sleep_notifier awacs_sleep_notifier = {
-	awacs_sleep_notify, SLEEP_LEVEL_SOUND,
-};
-#endif /* CONFIG_PM */
-
-/* for (soft) sample rate translations */
-int expand_bal;		/* Balance factor for expanding (not volume!) */
-int expand_read_bal;	/* Balance factor for expanding reads (not volume!) */
-
-/*** Low level stuff *********************************************************/
-
-static void *PMacAlloc(unsigned int size, gfp_t flags);
-static void PMacFree(void *ptr, unsigned int size);
-static int PMacIrqInit(void);
-#ifdef MODULE
-static void PMacIrqCleanup(void);
-#endif
-static void PMacSilence(void);
-static void PMacInit(void);
-static int PMacSetFormat(int format);
-static int PMacSetVolume(int volume);
-static void PMacPlay(void);
-static void PMacRecord(void);
-static irqreturn_t pmac_awacs_tx_intr(int irq, void *devid);
-static irqreturn_t pmac_awacs_rx_intr(int irq, void *devid);
-static irqreturn_t pmac_awacs_intr(int irq, void *devid);
-static void awacs_write(int val);
-static int awacs_get_volume(int reg, int lshift);
-static int awacs_volume_setter(int volume, int n, int mute, int lshift);
-
-
-/*** Mid level stuff **********************************************************/
-
-static int PMacMixerIoctl(u_int cmd, u_long arg);
-static int PMacWriteSqSetup(void);
-static int PMacReadSqSetup(void);
-static void PMacAbortRead(void);
-
-extern TRANS transAwacsNormal ;
-extern TRANS transAwacsExpand ;
-extern TRANS transAwacsNormalRead ;
-extern TRANS transAwacsExpandRead ;
-
-extern int daca_init(void);
-extern void daca_cleanup(void);
-extern int daca_set_volume(uint left_vol, uint right_vol);
-extern void daca_get_volume(uint * left_vol, uint  *right_vol);
-extern int daca_enter_sleep(void);
-extern int daca_leave_sleep(void);
-
-#define TRY_LOCK()	\
-	if ((rc = mutex_lock_interruptible(&dmasound_mutex)) != 0)	\
-		return rc;
-#define LOCK()		mutex_lock(&dmasound_mutex);
-
-#define UNLOCK()	mutex_unlock(&dmasound_mutex);
-
-/* We use different versions that the ones provided in dmasound.h
- * 
- * FIXME: Use different names ;)
- */
-#undef IOCTL_IN
-#undef IOCTL_OUT
-
-#define IOCTL_IN(arg, ret)	\
-	rc = get_user(ret, (int __user *)(arg)); \
-	if (rc) break;
-#define IOCTL_OUT(arg, ret)	\
-	ioctl_return2((int __user *)(arg), ret)
-
-static inline int ioctl_return2(int __user *addr, int value)
-{
-	return value < 0 ? value : put_user(value, addr);
-}
-
-
-/*** AE - TUMBLER / SNAPPER START ************************************************/
-
-
-int gpio_audio_reset, gpio_audio_reset_pol;
-int gpio_amp_mute, gpio_amp_mute_pol;
-int gpio_headphone_mute, gpio_headphone_mute_pol;
-int gpio_headphone_detect, gpio_headphone_detect_pol;
-int gpio_headphone_irq;
-
-int
-setup_audio_gpio(const char *name, const char* compatible, int *gpio_addr, int* gpio_pol)
-{
-	struct device_node *gpiop;
-	struct device_node *np;
-	const u32* pp;
-	int ret = -ENODEV;
-
-	gpiop = of_find_node_by_name(NULL, "gpio");
-	if (!gpiop)
-		goto done;
-
-	np = of_get_next_child(gpiop, NULL);
-	while(np != 0) {
-		if (name) {
-			const char *property =
-				of_get_property(np,"audio-gpio",NULL);
-			if (property != 0 && strcmp(property,name) == 0)
-				break;
-		} else if (compatible && of_device_is_compatible(np, compatible))
-			break;
-		np = of_get_next_child(gpiop, np);
-	}
-	if (!np)
-		goto done;
-	pp = of_get_property(np, "AAPL,address", NULL);
-	if (!pp)
-		goto done;
-	*gpio_addr = (*pp) & 0x0000ffff;
-	pp = of_get_property(np, "audio-gpio-active-state", NULL);
-	if (pp)
-		*gpio_pol = *pp;
-	else
-		*gpio_pol = 1;
-	ret = irq_of_parse_and_map(np, 0);
-done:
-	of_node_put(np);
-	of_node_put(gpiop);
-	return ret;
-}
-
-static inline void
-write_audio_gpio(int gpio_addr, int data)
-{
-	if (!gpio_addr)
-		return;
-	pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, gpio_addr, data ? 0x05 : 0x04);
-}
-
-static inline int
-read_audio_gpio(int gpio_addr)
-{
-	if (!gpio_addr)
-		return 0;
-	return ((pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, gpio_addr, 0) & 0x02) !=0);
-}
-
-/*
- * Headphone interrupt via GPIO (Tumbler, Snapper, DACA)
- */
-static irqreturn_t
-headphone_intr(int irq, void *devid)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&dmasound.lock, flags);
-	if (read_audio_gpio(gpio_headphone_detect) == gpio_headphone_detect_pol) {
-		printk(KERN_INFO "Audio jack plugged, muting speakers.\n");
-		write_audio_gpio(gpio_headphone_mute, !gpio_headphone_mute_pol);
-		write_audio_gpio(gpio_amp_mute, gpio_amp_mute_pol);
-		tas_output_device_change(sound_device_id,TAS_OUTPUT_HEADPHONES,0);
-	} else {
-		printk(KERN_INFO "Audio jack unplugged, enabling speakers.\n");
-		write_audio_gpio(gpio_amp_mute, !gpio_amp_mute_pol);
-		write_audio_gpio(gpio_headphone_mute, gpio_headphone_mute_pol);
-		tas_output_device_change(sound_device_id,TAS_OUTPUT_INTERNAL_SPKR,0);
-	}
-	spin_unlock_irqrestore(&dmasound.lock, flags);
-	return IRQ_HANDLED;
-}
-
-
-/* Initialize tumbler */
-
-static int
-tas_dmasound_init(void)
-{
-	setup_audio_gpio(
-		"audio-hw-reset",
-		NULL,
-		&gpio_audio_reset,
-		&gpio_audio_reset_pol);
-	setup_audio_gpio(
-		"amp-mute",
-		NULL,
-		&gpio_amp_mute,
-		&gpio_amp_mute_pol);
-	setup_audio_gpio("headphone-mute",
-		NULL,
-		&gpio_headphone_mute,
-		&gpio_headphone_mute_pol);
-	gpio_headphone_irq = setup_audio_gpio(
-		"headphone-detect",
-		NULL,
-		&gpio_headphone_detect,
-		&gpio_headphone_detect_pol);
-	/* Fix some broken OF entries in desktop machines */
-	if (!gpio_headphone_irq)
-		gpio_headphone_irq = setup_audio_gpio(
-			NULL,
-			"keywest-gpio15",
-			&gpio_headphone_detect,
-			&gpio_headphone_detect_pol);
-
-	write_audio_gpio(gpio_audio_reset, gpio_audio_reset_pol);
-	msleep(100);
-	write_audio_gpio(gpio_audio_reset, !gpio_audio_reset_pol);
-	msleep(100);
-  	if (gpio_headphone_irq) {
-		if (request_irq(gpio_headphone_irq,headphone_intr,0,"Headphone detect",NULL) < 0) {
-    			printk(KERN_ERR "tumbler: Can't request headphone interrupt\n");
-    			gpio_headphone_irq = 0;
-    		} else {
-			u8 val;
-			/* Activate headphone status interrupts */
-			val = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, gpio_headphone_detect, 0);
-			pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, gpio_headphone_detect, val | 0x80);
-			/* Trigger it */
-  			headphone_intr(0, NULL);
-  		}
-  	}
-  	if (!gpio_headphone_irq) {
-  		/* Some machine enter this case ? */
-  		printk(KERN_WARNING "tumbler: Headphone detect IRQ not found, enabling all outputs !\n");
-  		write_audio_gpio(gpio_amp_mute, !gpio_amp_mute_pol);
-  		write_audio_gpio(gpio_headphone_mute, !gpio_headphone_mute_pol);
-  	}
-	return 0;
-}
-
-
-static int
-tas_dmasound_cleanup(void)
-{
-	if (gpio_headphone_irq)
-		free_irq(gpio_headphone_irq, NULL);
-	return 0;
-}
-
-/* We don't support 48k yet */
-static int tas_freqs[1] = { 44100 } ;
-static int tas_freqs_ok[1] = { 1 } ;
-
-/* don't know what to do really - just have to leave it where
- * OF left things
-*/
-
-static int
-tas_set_frame_rate(void)
-{
-	if (i2s) {
-		out_le32(i2s + (I2S_REG_SERIAL_FORMAT >> 2), 0x41190000);
-		out_le32(i2s + (I2S_REG_DATAWORD_SIZES >> 2), 0x02000200);
-	}
-	dmasound.hard.speed = 44100 ;
-	awacs_rate_index = 0 ;
-	return 44100 ;
-}
-
-static int
-tas_mixer_ioctl(u_int cmd, u_long arg)
-{
-	int __user *argp = (int __user *)arg;
-	int data;
-	int rc;
-
-        rc=tas_device_ioctl(cmd, arg);
-        if (rc != -EINVAL) {
-        	return rc;
-        }
-
-        if ((cmd & ~0xff) == MIXER_WRITE(0) &&
-            tas_supported_mixers() & (1<<(cmd & 0xff))) {
-		rc = get_user(data, argp);
-                if (rc<0) return rc;
-		tas_set_mixer_level(cmd & 0xff, data);
-		tas_get_mixer_level(cmd & 0xff, &data);
-		return ioctl_return2(argp, data);
-        }
-        if ((cmd & ~0xff) == MIXER_READ(0) &&
-            tas_supported_mixers() & (1<<(cmd & 0xff))) {
-		tas_get_mixer_level(cmd & 0xff, &data);
-		return ioctl_return2(argp, data);
-        }
-
-	switch(cmd) {
-	case SOUND_MIXER_READ_DEVMASK:
-		data = tas_supported_mixers() | SOUND_MASK_SPEAKER;
-		rc = IOCTL_OUT(arg, data);
-		break;
-	case SOUND_MIXER_READ_STEREODEVS:
-		data = tas_stereo_mixers();
-		rc = IOCTL_OUT(arg, data);
-		break;
-	case SOUND_MIXER_READ_CAPS:
-		rc = IOCTL_OUT(arg, 0);
-		break;
-	case SOUND_MIXER_READ_RECMASK:
-		// XXX FIXME: find a way to check what is really available */
-		data = SOUND_MASK_LINE | SOUND_MASK_MIC;
-		rc = IOCTL_OUT(arg, data);
-		break;
-	case SOUND_MIXER_READ_RECSRC:
-		if (awacs_reg[0] & MASK_MUX_AUDIN)
-			data |= SOUND_MASK_LINE;
-		if (awacs_reg[0] & MASK_MUX_MIC)
-			data |= SOUND_MASK_MIC;
-		rc = IOCTL_OUT(arg, data);
-		break;
-	case SOUND_MIXER_WRITE_RECSRC:
- 		IOCTL_IN(arg, data);
-		data =0;
- 		rc = IOCTL_OUT(arg, data);
- 		break;
-	case SOUND_MIXER_WRITE_SPEAKER:	/* really bell volume */
- 		IOCTL_IN(arg, data);
- 		beep_vol = data & 0xff;
- 		/* fall through */
-	case SOUND_MIXER_READ_SPEAKER:
-		rc = IOCTL_OUT(arg, (beep_vol<<8) | beep_vol);
- 		break;
-	case SOUND_MIXER_OUTMASK:
-	case SOUND_MIXER_OUTSRC:
-	default:
-		rc = -EINVAL;
-	}
-
-	return rc;
-}
-
-static void __init
-tas_init_frame_rates(const unsigned int *prop, unsigned int l)
-{
-	int i ;
-	if (prop) {
-		for (i=0; i<1; i++)
-			tas_freqs_ok[i] = 0;
-		for (l /= sizeof(int); l > 0; --l) {
-			unsigned int r = *prop++;
-			/* Apple 'Fixed' format */
-			if (r >= 0x10000)
-				r >>= 16;
-			for (i = 0; i < 1; ++i) {
-				if (r == tas_freqs[i]) {
-					tas_freqs_ok[i] = 1;
-					break;
-				}
-			}
-		}
-	}
-	/* else we assume that all the rates are available */
-}
-
-
-/*** AE - TUMBLER / SNAPPER END ************************************************/
-
-
-
-/*** Low level stuff *********************************************************/
-
-/*
- * PCI PowerMac, with AWACS, Screamer, Burgundy, DACA or Tumbler and DBDMA.
- */
-static void *PMacAlloc(unsigned int size, gfp_t flags)
-{
-	return kmalloc(size, flags);
-}
-
-static void PMacFree(void *ptr, unsigned int size)
-{
-	kfree(ptr);
-}
-
-static int __init PMacIrqInit(void)
-{
-	if (awacs)
-		if (request_irq(awacs_irq, pmac_awacs_intr, 0, "Built-in Sound misc", NULL))
-			return 0;
-	if (request_irq(awacs_tx_irq, pmac_awacs_tx_intr, 0, "Built-in Sound out", NULL)
-	    || request_irq(awacs_rx_irq, pmac_awacs_rx_intr, 0, "Built-in Sound in", NULL))
-		return 0;
-	return 1;
-}
-
-#ifdef MODULE
-static void PMacIrqCleanup(void)
-{
-	/* turn off input & output dma */
-	DBDMA_DO_STOP(awacs_txdma);
-	DBDMA_DO_STOP(awacs_rxdma);
-
-	if (awacs)
-		/* disable interrupts from awacs interface */
-		out_le32(&awacs->control, in_le32(&awacs->control) & 0xfff);
-	
-	/* Switch off the sound clock */
-	pmac_call_feature(PMAC_FTR_SOUND_CHIP_ENABLE, awacs_node, 0, 0);
-	/* Make sure proper bits are set on pismo & tipb */
-	if ((machine_is_compatible("PowerBook3,1") ||
-	    machine_is_compatible("PowerBook3,2")) && awacs) {
-		awacs_reg[1] |= MASK_PAROUT0 | MASK_PAROUT1;
-		awacs_write(MASK_ADDR1 | awacs_reg[1]);
-		msleep(200);
-	}
-	if (awacs)
-		free_irq(awacs_irq, NULL);
-	free_irq(awacs_tx_irq, NULL);
-	free_irq(awacs_rx_irq, NULL);
-	
-	if (awacs)
-		iounmap(awacs);
-	if (i2s)
-		iounmap(i2s);
-	iounmap(awacs_txdma);
-	iounmap(awacs_rxdma);
-
-	release_mem_region(awacs_rsrc[0].start,
-			   awacs_rsrc[0].end - awacs_rsrc[0].start + 1);
-	release_mem_region(awacs_rsrc[1].start,
-			   awacs_rsrc[1].end - awacs_rsrc[1].start + 1);
-	release_mem_region(awacs_rsrc[2].start,
-			   awacs_rsrc[2].end - awacs_rsrc[2].start + 1);
-
-	kfree(awacs_tx_cmd_space);
-	kfree(awacs_rx_cmd_space);
-	kfree(beep_dbdma_cmd_space);
-	kfree(beep_buf);
-#ifdef CONFIG_PM
-	pmu_unregister_sleep_notifier(&awacs_sleep_notifier);
-#endif
-}
-#endif /* MODULE */
-
-static void PMacSilence(void)
-{
-	/* turn off output dma */
-	DBDMA_DO_STOP(awacs_txdma);
-}
-
-/* don't know what to do really - just have to leave it where
- * OF left things
-*/
-
-static int daca_set_frame_rate(void)
-{
-	if (i2s) {
-		out_le32(i2s + (I2S_REG_SERIAL_FORMAT >> 2), 0x41190000);
-		out_le32(i2s + (I2S_REG_DATAWORD_SIZES >> 2), 0x02000200);
-	}
-	dmasound.hard.speed = 44100 ;
-	awacs_rate_index = 0 ;
-	return 44100 ;
-}
-
-static int awacs_freqs[8] = {
-	44100, 29400, 22050, 17640, 14700, 11025, 8820, 7350
-};
-static int awacs_freqs_ok[8] = { 1, 1, 1, 1, 1, 1, 1, 1 };
-
-static int
-awacs_set_frame_rate(int desired, int catch_r)
-{
-	int tolerance, i = 8 ;
-	/*
-	 * If we have a sample rate which is within catchRadius percent
-	 * of the requested value, we don't have to expand the samples.
-	 * Otherwise choose the next higher rate.
-	 * N.B.: burgundy awacs only works at 44100 Hz.
-	 */
-	do {
-		tolerance = catch_r * awacs_freqs[--i] / 100;
-		if (awacs_freqs_ok[i]
-		    && dmasound.soft.speed <= awacs_freqs[i] + tolerance)
-			break;
-	} while (i > 0);
-	dmasound.hard.speed = awacs_freqs[i];
-	awacs_rate_index = i;
-
-	out_le32(&awacs->control, MASK_IEPC | (i << 8) | 0x11 );
-	awacs_reg[1] = (awacs_reg[1] & ~MASK_SAMPLERATE) | (i << 3);
-	awacs_write(awacs_reg[1] | MASK_ADDR1);
-	return dmasound.hard.speed;
-}
-
-static int
-burgundy_set_frame_rate(void)
-{
-	awacs_rate_index = 0 ;
-	awacs_reg[1] = (awacs_reg[1] & ~MASK_SAMPLERATE) ;
-	/* XXX disable error interrupt on burgundy for now */
-	out_le32(&awacs->control, MASK_IEPC | 0 | 0x11 | MASK_IEE);
-	return 44100 ;
-}
-
-static int
-set_frame_rate(int desired, int catch_r)
-{
-	switch (awacs_revision) {
-		case AWACS_BURGUNDY:
-			dmasound.hard.speed = burgundy_set_frame_rate();
-			break ;
-		case AWACS_TUMBLER:
-		case AWACS_SNAPPER:
-			dmasound.hard.speed = tas_set_frame_rate();
-			break ;
-		case AWACS_DACA:
-			dmasound.hard.speed =
-			  daca_set_frame_rate();
-			break ;
-		default:
-			dmasound.hard.speed = awacs_set_frame_rate(desired,
-						catch_r);
-			break ;
-	}
-	return dmasound.hard.speed ;
-}
-
-static void
-awacs_recalibrate(void)
-{
-	/* Sorry for the horrible delays... I hope to get that improved
-	 * by making the whole PM process asynchronous in a future version
-	 */
-	msleep(750);
-	awacs_reg[1] |= MASK_CMUTE | MASK_AMUTE;
-	awacs_write(awacs_reg[1] | MASK_RECALIBRATE | MASK_ADDR1);
-	msleep(1000);
-	awacs_write(awacs_reg[1] | MASK_ADDR1);
-}
-
-static void PMacInit(void)
-{
-	int tolerance;
-
-	switch (dmasound.soft.format) {
-	    case AFMT_S16_LE:
-	    case AFMT_U16_LE:
-		if (hw_can_byteswap)
-			dmasound.hard.format = AFMT_S16_LE;
-		else
-			dmasound.hard.format = AFMT_S16_BE;
-		break;
-	default:
-		dmasound.hard.format = AFMT_S16_BE;
-		break;
-	}
-	dmasound.hard.stereo = 1;
-	dmasound.hard.size = 16;
-
-	/* set dmasound.hard.speed - on the basis of what we want (soft)
-	 * and the tolerance we'll allow.
-	*/
-	set_frame_rate(dmasound.soft.speed, catchRadius) ;
-
-	tolerance = (catchRadius * dmasound.hard.speed) / 100;
-	if (dmasound.soft.speed >= dmasound.hard.speed - tolerance) {
-		dmasound.trans_write = &transAwacsNormal;
-		dmasound.trans_read = &transAwacsNormalRead;
-	} else {
-		dmasound.trans_write = &transAwacsExpand;
-		dmasound.trans_read = &transAwacsExpandRead;
-	}
-
-	if (awacs) {
-		if (hw_can_byteswap && (dmasound.hard.format == AFMT_S16_LE))
-			out_le32(&awacs->byteswap, BS_VAL);
-		else
-			out_le32(&awacs->byteswap, 0);
-	}
-	
-	expand_bal = -dmasound.soft.speed;
-	expand_read_bal = -dmasound.soft.speed;
-}
-
-static int PMacSetFormat(int format)
-{
-	int size;
-	int req_format = format;
-		
-	switch (format) {
-	case AFMT_QUERY:
-		return dmasound.soft.format;
-	case AFMT_MU_LAW:
-	case AFMT_A_LAW:
-	case AFMT_U8:
-	case AFMT_S8:
-		size = 8;
-		break;
-	case AFMT_S16_LE:
-		if(!hw_can_byteswap)
-			format = AFMT_S16_BE;
-	case AFMT_S16_BE:
-		size = 16;
-		break;
-	case AFMT_U16_LE:
-		if(!hw_can_byteswap)
-			format = AFMT_U16_BE;
-	case AFMT_U16_BE:
-		size = 16;
-		break;
-	default: /* :-) */
-		printk(KERN_ERR "dmasound: unknown format 0x%x, using AFMT_U8\n",
-		       format);
-		size = 8;
-		format = AFMT_U8;
-	}
-	
-	if (req_format == format) {
-		dmasound.soft.format = format;
-		dmasound.soft.size = size;
-		if (dmasound.minDev == SND_DEV_DSP) {
-			dmasound.dsp.format = format;
-			dmasound.dsp.size = size;
-		}
-	}
-
-	return format;
-}
-
-#define AWACS_VOLUME_TO_MASK(x)	(15 - ((((x) - 1) * 15) / 99))
-#define AWACS_MASK_TO_VOLUME(y)	(100 - ((y) * 99 / 15))
-
-static int awacs_get_volume(int reg, int lshift)
-{
-	int volume;
-
-	volume = AWACS_MASK_TO_VOLUME((reg >> lshift) & 0xf);
-	volume |= AWACS_MASK_TO_VOLUME(reg & 0xf) << 8;
-	return volume;
-}
-
-static int awacs_volume_setter(int volume, int n, int mute, int lshift)
-{
-	int r1, rn;
-
-	if (mute && volume == 0) {
-		r1 = awacs_reg[1] | mute;
-	} else {
-		r1 = awacs_reg[1] & ~mute;
-		rn = awacs_reg[n] & ~(0xf | (0xf << lshift));
-		rn |= ((AWACS_VOLUME_TO_MASK(volume & 0xff) & 0xf) << lshift);
-		rn |= AWACS_VOLUME_TO_MASK((volume >> 8) & 0xff) & 0xf;
-		awacs_reg[n] = rn;
-		awacs_write((n << 12) | rn);
-		volume = awacs_get_volume(rn, lshift);
-	}
-	if (r1 != awacs_reg[1]) {
-		awacs_reg[1] = r1;
-		awacs_write(r1 | MASK_ADDR1);
-	}
-	return volume;
-}
-
-static int PMacSetVolume(int volume)
-{
-	printk(KERN_WARNING "Bogus call to PMacSetVolume !\n");
-	return 0;
-}
-
-static void awacs_setup_for_beep(int speed)
-{
-	out_le32(&awacs->control,
-		 (in_le32(&awacs->control) & ~0x1f00)
-		 | ((speed > 0 ? speed : awacs_rate_index) << 8));
-
-	if (hw_can_byteswap && (dmasound.hard.format == AFMT_S16_LE) && speed == -1)
-		out_le32(&awacs->byteswap, BS_VAL);
-	else
-		out_le32(&awacs->byteswap, 0);
-}
-
-/* CHECK: how much of this *really* needs IRQs masked? */
-static void __PMacPlay(void)
-{
-	volatile struct dbdma_cmd *cp;
-	int next_frg, count;
-
-	count = 300 ; /* > two cycles at the lowest sample rate */
-
-	/* what we want to send next */
-	next_frg = (write_sq.front + write_sq.active) % write_sq.max_count;
-
-	if (awacs_beep_state) {
-		/* sound takes precedence over beeps */
-		/* stop the dma channel */
-		out_le32(&awacs_txdma->control, (RUN|PAUSE|FLUSH|WAKE) << 16);
-		while ( (in_le32(&awacs_txdma->status) & RUN) && count--)
-			udelay(1);
-		if (awacs)
-			awacs_setup_for_beep(-1);
-		out_le32(&awacs_txdma->cmdptr,
-			 virt_to_bus(&(awacs_tx_cmds[next_frg])));
-
-		beep_playing = 0;
-		awacs_beep_state = 0;
-	}
-	/* this won't allow more than two frags to be in the output queue at
-	   once. (or one, if the max frags is 2 - because count can't exceed
-	   2 in that case)
-	*/
-	while (write_sq.active < 2 && write_sq.active < write_sq.count) {
-		count = (write_sq.count == write_sq.active + 1) ?
-				write_sq.rear_size:write_sq.block_size ;
-		if (count < write_sq.block_size) {
-			if (!write_sq.syncing) /* last block not yet filled,*/
-				break; 	/* and we're not syncing or POST-ed */
-			else {
-				/* pretend the block is full to force a new
-				   block to be started on the next write */
-				write_sq.rear_size = write_sq.block_size ;
-				write_sq.syncing &= ~2 ; /* clear POST */
-			}
-		}
-		cp = &awacs_tx_cmds[next_frg];
-		st_le16(&cp->req_count, count);
-		st_le16(&cp->xfer_status, 0);
-		st_le16(&cp->command, OUTPUT_MORE + INTR_ALWAYS);
-		/* put a STOP at the end of the queue - but only if we have
-		   space for it.  This means that, if we under-run and we only
-		   have two fragments, we might re-play sound from an existing
-		   queued frag.  I guess the solution to that is not to set two
-		   frags if you are likely to under-run...
-		*/
-		if (write_sq.count < write_sq.max_count) {
-			if (++next_frg >= write_sq.max_count)
-				next_frg = 0 ; /* wrap */
-			/* if we get here then we've underrun so we will stop*/
-			st_le16(&awacs_tx_cmds[next_frg].command, DBDMA_STOP);
-		}
-		/* set the dbdma controller going, if it is not already */
-		if (write_sq.active == 0)
-			out_le32(&awacs_txdma->cmdptr, virt_to_bus(cp));
-		(void)in_le32(&awacs_txdma->status);
-		out_le32(&awacs_txdma->control, ((RUN|WAKE) << 16) + (RUN|WAKE));
-		++write_sq.active;
-	}
-}
-
-static void PMacPlay(void)
-{
-	LOCK();
-	if (!awacs_sleeping) {
-		unsigned long flags;
-
-		spin_lock_irqsave(&dmasound.lock, flags);
-		__PMacPlay();
-		spin_unlock_irqrestore(&dmasound.lock, flags);
-	}
-	UNLOCK();
-}
-
-static void PMacRecord(void)
-{
-	unsigned long flags;
-
-	if (read_sq.active)
-		return;
-
-	spin_lock_irqsave(&dmasound.lock, flags);
-
-	/* This is all we have to do......Just start it up.
-	*/
-	out_le32(&awacs_rxdma->control, ((RUN|WAKE) << 16) + (RUN|WAKE));
-	read_sq.active = 1;
-
-	spin_unlock_irqrestore(&dmasound.lock, flags);
-}
-
-/* if the TX status comes up "DEAD" - reported on some Power Computing machines
-   we need to re-start the dbdma - but from a different physical start address
-   and with a different transfer length.  It would get very messy to do this
-   with the normal dbdma_cmd blocks - we would have to re-write the buffer start
-   addresses each time.  So, we will keep a single dbdma_cmd block which can be
-   fiddled with.
-   When DEAD status is first reported the content of the faulted dbdma block is
-   copied into the emergency buffer and we note that the buffer is in use.
-   we then bump the start physical address by the amount that was successfully
-   output before it died.
-   On any subsequent DEAD result we just do the bump-ups (we know that we are
-   already using the emergency dbdma_cmd).
-   CHECK: this just tries to "do it".  It is possible that we should abandon
-   xfers when the number of residual bytes gets below a certain value - I can
-   see that this might cause a loop-forever if too small a transfer causes
-   DEAD status.  However this is a TODO for now - we'll see what gets reported.
-   When we get a successful transfer result with the emergency buffer we just
-   pretend that it completed using the original dmdma_cmd and carry on.  The
-   'next_cmd' field will already point back to the original loop of blocks.
-*/
-
-static irqreturn_t
-pmac_awacs_tx_intr(int irq, void *devid)
-{
-	int i = write_sq.front;
-	int stat;
-	int i_nowrap = write_sq.front;
-	volatile struct dbdma_cmd *cp;
-	/* != 0 when we are dealing with a DEAD xfer */
-	static int emergency_in_use;
-
-	spin_lock(&dmasound.lock);
-	while (write_sq.active > 0) { /* we expect to have done something*/
-		if (emergency_in_use) /* we are dealing with DEAD xfer */
-			cp = emergency_dbdma_cmd ;
-		else
-			cp = &awacs_tx_cmds[i];
-		stat = ld_le16(&cp->xfer_status);
-		if (stat & DEAD) {
-			unsigned short req, res ;
-			unsigned int phy ;
-#ifdef DEBUG_DMASOUND
-printk("dmasound_pmac: tx-irq: xfer died - patching it up...\n") ;
-#endif
-			/* to clear DEAD status we must first clear RUN
-			   set it to quiescent to be on the safe side */
-			(void)in_le32(&awacs_txdma->status);
-			out_le32(&awacs_txdma->control,
-				(RUN|PAUSE|FLUSH|WAKE) << 16);
-			write_sq.died++ ;
-			if (!emergency_in_use) { /* new problem */
-				memcpy((void *)emergency_dbdma_cmd, (void *)cp,
-					sizeof(struct dbdma_cmd));
-				emergency_in_use = 1;
-				cp = emergency_dbdma_cmd;
-			}
-			/* now bump the values to reflect the amount
-			   we haven't yet shifted */
-			req = ld_le16(&cp->req_count);
-			res = ld_le16(&cp->res_count);
-			phy = ld_le32(&cp->phy_addr);
-			phy += (req - res);
-			st_le16(&cp->req_count, res);
-			st_le16(&cp->res_count, 0);
-			st_le16(&cp->xfer_status, 0);
-			st_le32(&cp->phy_addr, phy);
-			st_le32(&cp->cmd_dep, virt_to_bus(&awacs_tx_cmds[(i+1)%write_sq.max_count]));
-			st_le16(&cp->command, OUTPUT_MORE | BR_ALWAYS | INTR_ALWAYS);
-			
-			/* point at our patched up command block */
-			out_le32(&awacs_txdma->cmdptr, virt_to_bus(cp));
-			/* we must re-start the controller */
-			(void)in_le32(&awacs_txdma->status);
-			/* should complete clearing the DEAD status */
-			out_le32(&awacs_txdma->control,
-				((RUN|WAKE) << 16) + (RUN|WAKE));
-			break; /* this block is still going */
-		}
-		if ((stat & ACTIVE) == 0)
-			break;	/* this frame is still going */
-		if (emergency_in_use)
-			emergency_in_use = 0 ; /* done that */
-		--write_sq.count;
-		--write_sq.active;
-		i_nowrap++;
-		if (++i >= write_sq.max_count)
-			i = 0;
-	}
-
-	/* if we stopped and we were not sync-ing - then we under-ran */
-	if( write_sq.syncing == 0 ){
-		stat = in_le32(&awacs_txdma->status) ;
-		/* we hit the dbdma_stop */
-		if( (stat & ACTIVE) == 0 ) write_sq.xruns++ ;
-	}
-
-	/* if we used some data up then wake the writer to supply some more*/
-	if (i_nowrap != write_sq.front)
-		WAKE_UP(write_sq.action_queue);
-	write_sq.front = i;
-
-	/* but make sure we funnel what we've already got */\
-	 if (!awacs_sleeping)
-		__PMacPlay();
-
-	/* make the wake-on-empty conditional on syncing */
-	if (!write_sq.active && (write_sq.syncing & 1))
-		WAKE_UP(write_sq.sync_queue); /* any time we're empty */
-	spin_unlock(&dmasound.lock);
-	return IRQ_HANDLED;
-}
-
-
-static irqreturn_t
-pmac_awacs_rx_intr(int irq, void *devid)
-{
-	int stat ;
-	/* For some reason on my PowerBook G3, I get one interrupt
-	 * when the interrupt vector is installed (like something is
-	 * pending).  This happens before the dbdma is initialized by
-	 * us, so I just check the command pointer and if it is zero,
-	 * just blow it off.
-	 */
-	if (in_le32(&awacs_rxdma->cmdptr) == 0)
-		return IRQ_HANDLED;
-
-	/* We also want to blow 'em off when shutting down.
-	*/
-	if (read_sq.active == 0)
-		return IRQ_HANDLED;
-
-	spin_lock(&dmasound.lock);
-	/* Check multiple buffers in case we were held off from
-	 * interrupt processing for a long time.  Geeze, I really hope
-	 * this doesn't happen.
-	 */
-	while ((stat=awacs_rx_cmds[read_sq.rear].xfer_status)) {
-
-		/* if we got a "DEAD" status then just log it for now.
-		   and try to restart dma.
-		   TODO: figure out how best to fix it up
-		*/
-		if (stat & DEAD){
-#ifdef DEBUG_DMASOUND
-printk("dmasound_pmac: rx-irq: DIED - attempting resurection\n");
-#endif
-			/* to clear DEAD status we must first clear RUN
-			   set it to quiescent to be on the safe side */
-			(void)in_le32(&awacs_txdma->status);
-			out_le32(&awacs_txdma->control,
-				(RUN|PAUSE|FLUSH|WAKE) << 16);
-			awacs_rx_cmds[read_sq.rear].xfer_status = 0;
-			awacs_rx_cmds[read_sq.rear].res_count = 0;
-			read_sq.died++ ;
-			(void)in_le32(&awacs_txdma->status);
-			/* re-start the same block */
-			out_le32(&awacs_rxdma->cmdptr,
-				virt_to_bus(&awacs_rx_cmds[read_sq.rear]));
-			/* we must re-start the controller */
-			(void)in_le32(&awacs_rxdma->status);
-			/* should complete clearing the DEAD status */
-			out_le32(&awacs_rxdma->control,
-				((RUN|WAKE) << 16) + (RUN|WAKE));
-			spin_unlock(&dmasound.lock);
-			return IRQ_HANDLED; /* try this block again */
-		}
-		/* Clear status and move on to next buffer.
-		*/
-		awacs_rx_cmds[read_sq.rear].xfer_status = 0;
-		read_sq.rear++;
-
-		/* Wrap the buffer ring.
-		*/
-		if (read_sq.rear >= read_sq.max_active)
-			read_sq.rear = 0;
-
-		/* If we have caught up to the front buffer, bump it.
-		 * This will cause weird (but not fatal) results if the
-		 * read loop is currently using this buffer.  The user is
-		 * behind in this case anyway, so weird things are going
-		 * to happen.
-		 */
-		if (read_sq.rear == read_sq.front) {
-			read_sq.front++;
-			read_sq.xruns++ ; /* we overan */
-			if (read_sq.front >= read_sq.max_active)
-				read_sq.front = 0;
-		}
-	}
-
-	WAKE_UP(read_sq.action_queue);
-	spin_unlock(&dmasound.lock);
-	return IRQ_HANDLED;
-}
-
-
-static irqreturn_t
-pmac_awacs_intr(int irq, void *devid)
-{
-	int ctrl;
-	int status;
-	int r1;
-
-	spin_lock(&dmasound.lock);
-	ctrl = in_le32(&awacs->control);
-	status = in_le32(&awacs->codec_stat);
-
-	if (ctrl & MASK_PORTCHG) {
-		/* tested on Screamer, should work on others too */
-		if (awacs_revision == AWACS_SCREAMER) {
-			if (((status & MASK_HDPCONN) >> 3) && (hdp_connected == 0)) {
-				hdp_connected = 1;
-				
-				r1 = awacs_reg[1] | MASK_SPKMUTE;
-				awacs_reg[1] = r1;
-				awacs_write(r1 | MASK_ADDR_MUTE);
-			} else if (((status & MASK_HDPCONN) >> 3 == 0) && (hdp_connected == 1)) {
-				hdp_connected = 0;
-				
-				r1 = awacs_reg[1] & ~MASK_SPKMUTE;
-				awacs_reg[1] = r1;
-				awacs_write(r1 | MASK_ADDR_MUTE);
-			}
-		}
-	}
-	if (ctrl & MASK_CNTLERR) {
-		int err = (in_le32(&awacs->codec_stat) & MASK_ERRCODE) >> 16;
-		/* CHECK: we just swallow burgundy errors at the moment..*/
-		if (err != 0 && awacs_revision != AWACS_BURGUNDY)
-			printk(KERN_ERR "dmasound_pmac: error %x\n", err);
-	}
-	/* Writing 1s to the CNTLERR and PORTCHG bits clears them... */
-	out_le32(&awacs->control, ctrl);
-	spin_unlock(&dmasound.lock);
-	return IRQ_HANDLED;
-}
-
-static void
-awacs_write(int val)
-{
-	int count = 300 ;
-	if (awacs_revision >= AWACS_DACA || !awacs)
-		return ;
-
-	while ((in_le32(&awacs->codec_ctrl) & MASK_NEWECMD) && count--)
-		udelay(1) ;	/* timeout is > 2 samples at lowest rate */
-	out_le32(&awacs->codec_ctrl, val | (awacs_subframe << 22));
-	(void)in_le32(&awacs->byteswap);
-}
-
-/* this is called when the beep timer expires... it will be called even
-   if the beep has been overidden by other sound output.
-*/
-static void awacs_nosound(unsigned long xx)
-{
-	unsigned long flags;
-	int count = 600 ; /* > four samples at lowest rate */
-
-	spin_lock_irqsave(&dmasound.lock, flags);
-	if (beep_playing) {
-		st_le16(&beep_dbdma_cmd->command, DBDMA_STOP);
-		out_le32(&awacs_txdma->control, (RUN|PAUSE|FLUSH|WAKE) << 16);
-		while ((in_le32(&awacs_txdma->status) & RUN) && count--)
-			udelay(1);
-		if (awacs)
-			awacs_setup_for_beep(-1);
-		beep_playing = 0;
-	}
-	spin_unlock_irqrestore(&dmasound.lock, flags);
-}
-
-/*
- * We generate the beep with a single dbdma command that loops a buffer
- * forever - without generating interrupts.
- *
- * So, to stop it you have to stop dma output as per awacs_nosound.
- */
-static int awacs_beep_event(struct input_dev *dev, unsigned int type,
-		unsigned int code, int hz)
-{
-	unsigned long flags;
-	int beep_speed = 0;
-	int srate;
-	int period, ncycles, nsamples;
-	int i, j, f;
-	short *p;
-	static int beep_hz_cache;
-	static int beep_nsamples_cache;
-	static int beep_volume_cache;
-
-	if (type != EV_SND)
-		return -1;
-	switch (code) {
-	case SND_BELL:
-		if (hz)
-			hz = 1000;
-		break;
-	case SND_TONE:
-		break;
-	default:
-		return -1;
-	}
-
-	if (beep_buf == NULL)
-		return -1;
-
-	/* quick-hack fix for DACA, Burgundy & Tumbler */
-
-	if (awacs_revision >= AWACS_DACA){
-		srate = 44100 ;
-	} else {
-		for (i = 0; i < 8 && awacs_freqs[i] >= BEEP_SRATE; ++i)
-			if (awacs_freqs_ok[i])
-				beep_speed = i;
-		srate = awacs_freqs[beep_speed];
-	}
-
-	if (hz <= srate / BEEP_BUFLEN || hz > srate / 2) {
-		/* cancel beep currently playing */
-		awacs_nosound(0);
-		return 0;
-	}
-
-	spin_lock_irqsave(&dmasound.lock, flags);
-	if (beep_playing || write_sq.active || beep_buf == NULL) {
-		spin_unlock_irqrestore(&dmasound.lock, flags);
-		return -1;		/* too hard, sorry :-( */
-	}
-	beep_playing = 1;
-	st_le16(&beep_dbdma_cmd->command, OUTPUT_MORE + BR_ALWAYS);
-	spin_unlock_irqrestore(&dmasound.lock, flags);
-
-	if (hz == beep_hz_cache && beep_vol == beep_volume_cache) {
-		nsamples = beep_nsamples_cache;
-	} else {
-		period = srate * 256 / hz;	/* fixed point */
-		ncycles = BEEP_BUFLEN * 256 / period;
-		nsamples = (period * ncycles) >> 8;
-		f = ncycles * 65536 / nsamples;
-		j = 0;
-		p = beep_buf;
-		for (i = 0; i < nsamples; ++i, p += 2) {
-			p[0] = p[1] = beep_wform[j >> 8] * beep_vol;
-			j = (j + f) & 0xffff;
-		}
-		beep_hz_cache = hz;
-		beep_volume_cache = beep_vol;
-		beep_nsamples_cache = nsamples;
-	}
-
-	st_le16(&beep_dbdma_cmd->req_count, nsamples*4);
-	st_le16(&beep_dbdma_cmd->xfer_status, 0);
-	st_le32(&beep_dbdma_cmd->cmd_dep, virt_to_bus(beep_dbdma_cmd));
-	st_le32(&beep_dbdma_cmd->phy_addr, virt_to_bus(beep_buf));
-	awacs_beep_state = 1;
-
-	spin_lock_irqsave(&dmasound.lock, flags);
-	if (beep_playing) {	/* i.e. haven't been terminated already */
-		int count = 300 ;
-		out_le32(&awacs_txdma->control, (RUN|WAKE|FLUSH|PAUSE) << 16);
-		while ((in_le32(&awacs_txdma->status) & RUN) && count--)
-			udelay(1); /* timeout > 2 samples at lowest rate*/
-		if (awacs)
-			awacs_setup_for_beep(beep_speed);
-		out_le32(&awacs_txdma->cmdptr, virt_to_bus(beep_dbdma_cmd));
-		(void)in_le32(&awacs_txdma->status);
-		out_le32(&awacs_txdma->control, RUN | (RUN << 16));
-	}
-	spin_unlock_irqrestore(&dmasound.lock, flags);
-
-	return 0;
-}
-
-/* used in init and for wake-up */
-
-static void
-load_awacs(void)
-{
-	awacs_write(awacs_reg[0] + MASK_ADDR0);
-	awacs_write(awacs_reg[1] + MASK_ADDR1);
-	awacs_write(awacs_reg[2] + MASK_ADDR2);
-	awacs_write(awacs_reg[4] + MASK_ADDR4);
-
-	if (awacs_revision == AWACS_SCREAMER) {
-		awacs_write(awacs_reg[5] + MASK_ADDR5);
-		msleep(100);
-		awacs_write(awacs_reg[6] + MASK_ADDR6);
-		msleep(2);
-		awacs_write(awacs_reg[1] + MASK_ADDR1);
-		awacs_write(awacs_reg[7] + MASK_ADDR7);
-	}
-	if (awacs) {
-		if (hw_can_byteswap && (dmasound.hard.format == AFMT_S16_LE))
-			out_le32(&awacs->byteswap, BS_VAL);
-		else
-			out_le32(&awacs->byteswap, 0);
-	}
-}
-
-#ifdef CONFIG_PM
-/*
- * Save state when going to sleep, restore it afterwards.
- */
-/* FIXME: sort out disabling/re-enabling of read stuff as well */
-static void awacs_sleep_notify(struct pmu_sleep_notifier *self, int when)
-{
-	unsigned long flags;
-
-	switch (when) {
-	case PBOOK_SLEEP_NOW:		
-		LOCK();
-		awacs_sleeping = 1;
-		/* Tell the rest of the driver we are now going to sleep */
-		mb();
-		if (awacs_revision == AWACS_SCREAMER ||
-		    awacs_revision == AWACS_AWACS) {
-			awacs_reg1_save = awacs_reg[1];
-			awacs_reg[1] |= MASK_AMUTE | MASK_CMUTE;
-			awacs_write(MASK_ADDR1 | awacs_reg[1]);
-		}
-
-		PMacSilence();
-		/* stop rx - if going - a bit of a daft user... but */
-		out_le32(&awacs_rxdma->control, (RUN|WAKE|FLUSH << 16));
-		/* deny interrupts */
-		if (awacs)
-			disable_irq(awacs_irq);
-		disable_irq(awacs_tx_irq);
-		disable_irq(awacs_rx_irq);
-		/* Chip specific sleep code */
-		switch (awacs_revision) {
-			case AWACS_TUMBLER:
-			case AWACS_SNAPPER:
-				write_audio_gpio(gpio_headphone_mute, gpio_headphone_mute_pol);
-				write_audio_gpio(gpio_amp_mute, gpio_amp_mute_pol);
-				tas_enter_sleep();
-				write_audio_gpio(gpio_audio_reset, gpio_audio_reset_pol);
-				break ;
-			case AWACS_DACA:
-				daca_enter_sleep();
-				break ;
-			case AWACS_BURGUNDY:
-				break ;
-			case AWACS_SCREAMER:
-			case AWACS_AWACS:
-			default:
-				out_le32(&awacs->control, 0x11) ;
-				break ;
-		}
-		/* Disable sound clock */
-		pmac_call_feature(PMAC_FTR_SOUND_CHIP_ENABLE, awacs_node, 0, 0);
-		/* According to Darwin, we do that after turning off the sound
-		 * chip clock. All this will have to be cleaned up once we properly
-		 * parse the OF sound-objects
-		 */
-		if ((machine_is_compatible("PowerBook3,1") ||
-		    machine_is_compatible("PowerBook3,2")) && awacs) {
-			awacs_reg[1] |= MASK_PAROUT0 | MASK_PAROUT1;
-			awacs_write(MASK_ADDR1 | awacs_reg[1]);
-			msleep(200);
-		}
-		break;
-	case PBOOK_WAKE:
-		/* Enable sound clock */
-		pmac_call_feature(PMAC_FTR_SOUND_CHIP_ENABLE, awacs_node, 0, 1);
-		if ((machine_is_compatible("PowerBook3,1") ||
-		    machine_is_compatible("PowerBook3,2")) && awacs) {
-			msleep(100);
-			awacs_reg[1] &= ~(MASK_PAROUT0 | MASK_PAROUT1);
-			awacs_write(MASK_ADDR1 | awacs_reg[1]);
-			msleep(300);
-		} else
-			msleep(1000);
- 		/* restore settings */
-		switch (awacs_revision) {
-			case AWACS_TUMBLER:
-			case AWACS_SNAPPER:
-				write_audio_gpio(gpio_headphone_mute, gpio_headphone_mute_pol);
-				write_audio_gpio(gpio_amp_mute, gpio_amp_mute_pol);
-				write_audio_gpio(gpio_audio_reset, gpio_audio_reset_pol);
-				msleep(100);
-				write_audio_gpio(gpio_audio_reset, !gpio_audio_reset_pol);
-				msleep(150);
-				tas_leave_sleep(); /* Stub for now */
-				headphone_intr(0, NULL);
-				break;
-			case AWACS_DACA:
-				msleep(10); /* Check this !!! */
-				daca_leave_sleep();
-				break ;		/* dont know how yet */
-			case AWACS_BURGUNDY:
-				break ;
-			case AWACS_SCREAMER:
-			case AWACS_AWACS:
-			default:
-		 		load_awacs() ;
-				break ;
-		}
-		/* Recalibrate chip */
-		if (awacs_revision == AWACS_SCREAMER && awacs)
-			awacs_recalibrate();
-		/* Make sure dma is stopped */
-		PMacSilence();
-		if (awacs)
-			enable_irq(awacs_irq);
-		enable_irq(awacs_tx_irq);
- 		enable_irq(awacs_rx_irq);
- 		if (awacs) {
- 			/* OK, allow ints back again */
-	 		out_le32(&awacs->control, MASK_IEPC
- 			 	| (awacs_rate_index << 8) | 0x11
- 				 | (awacs_revision < AWACS_DACA ? MASK_IEE: 0));
- 		}
- 		if (macio_base && is_pbook_g3) {
-			/* FIXME: should restore the setup we had...*/
-			out_8(macio_base + 0x37, 3);
- 		} else if (is_pbook_3X00) {
-			in_8(latch_base + 0x190);
-		}
-		/* Remove mute */
-		if (awacs_revision == AWACS_SCREAMER ||
-		    awacs_revision == AWACS_AWACS) {
-			awacs_reg[1] = awacs_reg1_save;
-			awacs_write(MASK_ADDR1 | awacs_reg[1]);
-		}
- 		awacs_sleeping = 0;
-		/* Resume pending sounds. */
-		/* we don't try to restart input... */
-		spin_lock_irqsave(&dmasound.lock, flags);
-		__PMacPlay();
-		spin_unlock_irqrestore(&dmasound.lock, flags);
-		UNLOCK();
-	}
-}
-#endif /* CONFIG_PM */
-
-
-/* All the burgundy functions: */
-
-/* Waits for busy flag to clear */
-static inline void
-awacs_burgundy_busy_wait(void)
-{
-	int count = 50; /* > 2 samples at 44k1 */
-	while ((in_le32(&awacs->codec_ctrl) & MASK_NEWECMD) && count--)
-		udelay(1) ;
-}
-
-static inline void
-awacs_burgundy_extend_wait(void)
-{
-	int count = 50 ; /* > 2 samples at 44k1 */
-	while ((!(in_le32(&awacs->codec_stat) & MASK_EXTEND)) && count--)
-		udelay(1) ;
-	count = 50;
-	while ((in_le32(&awacs->codec_stat) & MASK_EXTEND) && count--)
-		udelay(1);
-}
-
-static void
-awacs_burgundy_wcw(unsigned addr, unsigned val)
-{
-	out_le32(&awacs->codec_ctrl, addr + 0x200c00 + (val & 0xff));
-	awacs_burgundy_busy_wait();
-	out_le32(&awacs->codec_ctrl, addr + 0x200d00 +((val>>8) & 0xff));
-	awacs_burgundy_busy_wait();
-	out_le32(&awacs->codec_ctrl, addr + 0x200e00 +((val>>16) & 0xff));
-	awacs_burgundy_busy_wait();
-	out_le32(&awacs->codec_ctrl, addr + 0x200f00 +((val>>24) & 0xff));
-	awacs_burgundy_busy_wait();
-}
-
-static unsigned
-awacs_burgundy_rcw(unsigned addr)
-{
-	unsigned val = 0;
-	unsigned long flags;
-
-	/* should have timeouts here */
-	spin_lock_irqsave(&dmasound.lock, flags);
-
-	out_le32(&awacs->codec_ctrl, addr + 0x100000);
-	awacs_burgundy_busy_wait();
-	awacs_burgundy_extend_wait();
-	val += (in_le32(&awacs->codec_stat) >> 4) & 0xff;
-
-	out_le32(&awacs->codec_ctrl, addr + 0x100100);
-	awacs_burgundy_busy_wait();
-	awacs_burgundy_extend_wait();
-	val += ((in_le32(&awacs->codec_stat)>>4) & 0xff) <<8;
-
-	out_le32(&awacs->codec_ctrl, addr + 0x100200);
-	awacs_burgundy_busy_wait();
-	awacs_burgundy_extend_wait();
-	val += ((in_le32(&awacs->codec_stat)>>4) & 0xff) <<16;
-
-	out_le32(&awacs->codec_ctrl, addr + 0x100300);
-	awacs_burgundy_busy_wait();
-	awacs_burgundy_extend_wait();
-	val += ((in_le32(&awacs->codec_stat)>>4) & 0xff) <<24;
-
-	spin_unlock_irqrestore(&dmasound.lock, flags);
-
-	return val;
-}
-
-
-static void
-awacs_burgundy_wcb(unsigned addr, unsigned val)
-{
-	out_le32(&awacs->codec_ctrl, addr + 0x300000 + (val & 0xff));
-	awacs_burgundy_busy_wait();
-}
-
-static unsigned
-awacs_burgundy_rcb(unsigned addr)
-{
-	unsigned val = 0;
-	unsigned long flags;
-
-	/* should have timeouts here */
-	spin_lock_irqsave(&dmasound.lock, flags);
-
-	out_le32(&awacs->codec_ctrl, addr + 0x100000);
-	awacs_burgundy_busy_wait();
-	awacs_burgundy_extend_wait();
-	val += (in_le32(&awacs->codec_stat) >> 4) & 0xff;
-
-	spin_unlock_irqrestore(&dmasound.lock, flags);
-
-	return val;
-}
-
-static int
-awacs_burgundy_check(void)
-{
-	/* Checks to see the chip is alive and kicking */
-	int error = in_le32(&awacs->codec_ctrl) & MASK_ERRCODE;
-
-	return error == 0xf0000;
-}
-
-static int
-awacs_burgundy_init(void)
-{
-	if (awacs_burgundy_check()) {
-		printk(KERN_WARNING "dmasound_pmac: burgundy not working :-(\n");
-		return 1;
-	}
-
-	awacs_burgundy_wcb(MASK_ADDR_BURGUNDY_OUTPUTENABLES,
-			   DEF_BURGUNDY_OUTPUTENABLES);
-	awacs_burgundy_wcb(MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES,
-			   DEF_BURGUNDY_MORE_OUTPUTENABLES);
-	awacs_burgundy_wcw(MASK_ADDR_BURGUNDY_OUTPUTSELECTS,
-			   DEF_BURGUNDY_OUTPUTSELECTS);
-
-	awacs_burgundy_wcb(MASK_ADDR_BURGUNDY_INPSEL21,
-			   DEF_BURGUNDY_INPSEL21);
-	awacs_burgundy_wcb(MASK_ADDR_BURGUNDY_INPSEL3,
-			   DEF_BURGUNDY_INPSEL3);
-	awacs_burgundy_wcb(MASK_ADDR_BURGUNDY_GAINCD,
-			   DEF_BURGUNDY_GAINCD);
-	awacs_burgundy_wcb(MASK_ADDR_BURGUNDY_GAINLINE,
-			   DEF_BURGUNDY_GAINLINE);
-	awacs_burgundy_wcb(MASK_ADDR_BURGUNDY_GAINMIC,
-			   DEF_BURGUNDY_GAINMIC);
-	awacs_burgundy_wcb(MASK_ADDR_BURGUNDY_GAINMODEM,
-			   DEF_BURGUNDY_GAINMODEM);
-
-	awacs_burgundy_wcb(MASK_ADDR_BURGUNDY_ATTENSPEAKER,
-			   DEF_BURGUNDY_ATTENSPEAKER);
-	awacs_burgundy_wcb(MASK_ADDR_BURGUNDY_ATTENLINEOUT,
-			   DEF_BURGUNDY_ATTENLINEOUT);
-	awacs_burgundy_wcb(MASK_ADDR_BURGUNDY_ATTENHP,
-			   DEF_BURGUNDY_ATTENHP);
-
-	awacs_burgundy_wcw(MASK_ADDR_BURGUNDY_MASTER_VOLUME,
-			   DEF_BURGUNDY_MASTER_VOLUME);
-	awacs_burgundy_wcw(MASK_ADDR_BURGUNDY_VOLCD,
-			   DEF_BURGUNDY_VOLCD);
-	awacs_burgundy_wcw(MASK_ADDR_BURGUNDY_VOLLINE,
-			   DEF_BURGUNDY_VOLLINE);
-	awacs_burgundy_wcw(MASK_ADDR_BURGUNDY_VOLMIC,
-			   DEF_BURGUNDY_VOLMIC);
-	return 0;
-}
-
-static void
-awacs_burgundy_write_volume(unsigned address, int volume)
-{
-	int hardvolume,lvolume,rvolume;
-
-	lvolume = (volume & 0xff) ? (volume & 0xff) + 155 : 0;
-	rvolume = ((volume >>8)&0xff) ? ((volume >> 8)&0xff ) + 155 : 0;
-
-	hardvolume = lvolume + (rvolume << 16);
-
-	awacs_burgundy_wcw(address, hardvolume);
-}
-
-static int
-awacs_burgundy_read_volume(unsigned address)
-{
-	int softvolume,wvolume;
-
-	wvolume = awacs_burgundy_rcw(address);
-
-	softvolume = (wvolume & 0xff) - 155;
-	softvolume += (((wvolume >> 16) & 0xff) - 155)<<8;
-
-	return softvolume > 0 ? softvolume : 0;
-}
-
-static int
-awacs_burgundy_read_mvolume(unsigned address)
-{
-	int lvolume,rvolume,wvolume;
-
-	wvolume = awacs_burgundy_rcw(address);
-
-	wvolume &= 0xffff;
-
-	rvolume = (wvolume & 0xff) - 155;
-	lvolume = ((wvolume & 0xff00)>>8) - 155;
-
-	return lvolume + (rvolume << 8);
-}
-
-static void
-awacs_burgundy_write_mvolume(unsigned address, int volume)
-{
-	int lvolume,rvolume,hardvolume;
-
-	lvolume = (volume &0xff) ? (volume & 0xff) + 155 :0;
-	rvolume = ((volume >>8) & 0xff) ? (volume >> 8) + 155 :0;
-
-	hardvolume = lvolume + (rvolume << 8);
-	hardvolume += (hardvolume << 16);
-
-	awacs_burgundy_wcw(address, hardvolume);
-}
-
-/* End burgundy functions */
-
-/* Set up output volumes on machines with the 'perch/whisper' extension card.
- * this has an SGS i2c chip (7433) which is accessed using the cuda.
- *
- * TODO: split this out and make use of the other parts of the SGS chip to
- * do Bass, Treble etc.
- */
-
-static void
-awacs_enable_amp(int spkr_vol)
-{
-#ifdef CONFIG_ADB_CUDA
-	struct adb_request req;
-
-	if (sys_ctrler != SYS_CTRLER_CUDA)
-		return;
-
-	/* turn on headphones */
-	cuda_request(&req, NULL, 5, CUDA_PACKET, CUDA_GET_SET_IIC,
-		     0x8a, 4, 0);
-	while (!req.complete) cuda_poll();
-	cuda_request(&req, NULL, 5, CUDA_PACKET, CUDA_GET_SET_IIC,
-		     0x8a, 6, 0);
-	while (!req.complete) cuda_poll();
-
-	/* turn on speaker */
-	cuda_request(&req, NULL, 5, CUDA_PACKET, CUDA_GET_SET_IIC,
-		     0x8a, 3, (100 - (spkr_vol & 0xff)) * 32 / 100);
-	while (!req.complete) cuda_poll();
-	cuda_request(&req, NULL, 5, CUDA_PACKET, CUDA_GET_SET_IIC,
-		     0x8a, 5, (100 - ((spkr_vol >> 8) & 0xff)) * 32 / 100);
-	while (!req.complete) cuda_poll();
-
-	cuda_request(&req, NULL, 5, CUDA_PACKET,
-		     CUDA_GET_SET_IIC, 0x8a, 1, 0x29);
-	while (!req.complete) cuda_poll();
-#endif /* CONFIG_ADB_CUDA */
-}
-
-
-/*** Mid level stuff *********************************************************/
-
-
-/*
- * /dev/mixer abstraction
- */
-
-static void do_line_lev(int data)
-{
-		line_lev = data ;
-		awacs_reg[0] &= ~MASK_MUX_AUDIN;
-		if ((data & 0xff) >= 50)
-			awacs_reg[0] |= MASK_MUX_AUDIN;
-		awacs_write(MASK_ADDR0 | awacs_reg[0]);
-}
-
-static void do_ip_gain(int data)
-{
-	ip_gain = data ;
-	data &= 0xff;
-	awacs_reg[0] &= ~MASK_GAINLINE;
-	if (awacs_revision == AWACS_SCREAMER) {
-		awacs_reg[6] &= ~MASK_MIC_BOOST ;
-		if (data >= 33) {
-			awacs_reg[0] |= MASK_GAINLINE;
-			if( data >= 66)
-				awacs_reg[6] |= MASK_MIC_BOOST ;
-		}
-		awacs_write(MASK_ADDR6 | awacs_reg[6]) ;
-	} else {
-		if (data >= 50)
-			awacs_reg[0] |= MASK_GAINLINE;
-	}
-	awacs_write(MASK_ADDR0 | awacs_reg[0]);
-}
-
-static void do_mic_lev(int data)
-{
-	mic_lev = data ;
-	data &= 0xff;
-	awacs_reg[0] &= ~MASK_MUX_MIC;
-	if (data >= 50)
-		awacs_reg[0] |= MASK_MUX_MIC;
-	awacs_write(MASK_ADDR0 | awacs_reg[0]);
-}
-
-static void do_cd_lev(int data)
-{
-	cd_lev = data ;
-	awacs_reg[0] &= ~MASK_MUX_CD;
-	if ((data & 0xff) >= 50)
-		awacs_reg[0] |= MASK_MUX_CD;
-	awacs_write(MASK_ADDR0 | awacs_reg[0]);
-}
-
-static void do_rec_lev(int data)
-{
-	int left, right ;
-	rec_lev = data ;
-	/* need to fudge this to use the volume setter routine */
-	left = 100 - (data & 0xff) ; if( left < 0 ) left = 0 ;
-	right = 100 - ((data >> 8) & 0xff) ; if( right < 0 ) right = 0 ;
-	left |= (right << 8 );
-	left = awacs_volume_setter(left, 0, 0, 4);
-}
-
-static void do_passthru_vol(int data)
-{
-	passthru_vol = data ;
-	awacs_reg[1] &= ~MASK_LOOPTHRU;
-	if (awacs_revision == AWACS_SCREAMER) {
-		if( data ) { /* switch it on for non-zero */
-			awacs_reg[1] |= MASK_LOOPTHRU;
-			awacs_write(MASK_ADDR1 | awacs_reg[1]);
-		}
-		data = awacs_volume_setter(data, 5, 0, 6) ;
-	} else {
-		if ((data & 0xff) >= 50)
-			awacs_reg[1] |= MASK_LOOPTHRU;
-		awacs_write(MASK_ADDR1 | awacs_reg[1]);
-		data = (awacs_reg[1] & MASK_LOOPTHRU)? 100: 0;
-	}
-}
-
-static int awacs_mixer_ioctl(u_int cmd, u_long arg)
-{
-	int data;
-	int rc;
-
-	switch (cmd) {
-	case SOUND_MIXER_READ_CAPS:
-		/* say we will allow multiple inputs?  prob. wrong
-			so I'm switching it to single */
-		return IOCTL_OUT(arg, 1);
-	case SOUND_MIXER_READ_DEVMASK:
-		data  = SOUND_MASK_VOLUME | SOUND_MASK_SPEAKER
-			| SOUND_MASK_LINE | SOUND_MASK_MIC | SOUND_MASK_CD
-			| SOUND_MASK_IGAIN | SOUND_MASK_RECLEV
-			| SOUND_MASK_ALTPCM
-			| SOUND_MASK_MONITOR;
-		rc = IOCTL_OUT(arg, data);
-		break;
-	case SOUND_MIXER_READ_RECMASK:
-		data = SOUND_MASK_LINE | SOUND_MASK_MIC | SOUND_MASK_CD;
-		rc = IOCTL_OUT(arg, data);
-		break;
-	case SOUND_MIXER_READ_RECSRC:
-		data = 0;
-		if (awacs_reg[0] & MASK_MUX_AUDIN)
-			data |= SOUND_MASK_LINE;
-		if (awacs_reg[0] & MASK_MUX_MIC)
-			data |= SOUND_MASK_MIC;
-		if (awacs_reg[0] & MASK_MUX_CD)
-			data |= SOUND_MASK_CD;
-		rc = IOCTL_OUT(arg, data);
-		break;
-	case SOUND_MIXER_WRITE_RECSRC:
-		IOCTL_IN(arg, data);
-		data &= (SOUND_MASK_LINE | SOUND_MASK_MIC | SOUND_MASK_CD);
-		awacs_reg[0] &= ~(MASK_MUX_CD | MASK_MUX_MIC
-				  | MASK_MUX_AUDIN);
-		if (data & SOUND_MASK_LINE)
-			awacs_reg[0] |= MASK_MUX_AUDIN;
-		if (data & SOUND_MASK_MIC)
-			awacs_reg[0] |= MASK_MUX_MIC;
-		if (data & SOUND_MASK_CD)
-			awacs_reg[0] |= MASK_MUX_CD;
-		awacs_write(awacs_reg[0] | MASK_ADDR0);
-		rc = IOCTL_OUT(arg, data);
-		break;
-	case SOUND_MIXER_READ_STEREODEVS:
-		data = SOUND_MASK_VOLUME | SOUND_MASK_SPEAKER| SOUND_MASK_RECLEV  ;
-		if (awacs_revision == AWACS_SCREAMER)
-			data |= SOUND_MASK_MONITOR ;
-		rc = IOCTL_OUT(arg, data);
-		break;
-	case SOUND_MIXER_WRITE_VOLUME:
-		IOCTL_IN(arg, data);
-		line_vol = data ;
-		awacs_volume_setter(data, 2, 0, 6);
-		/* fall through */
-	case SOUND_MIXER_READ_VOLUME:
-		rc = IOCTL_OUT(arg, line_vol);
-		break;
-	case SOUND_MIXER_WRITE_SPEAKER:
-		IOCTL_IN(arg, data);
-		spk_vol = data ;
-		if (has_perch)
-			awacs_enable_amp(data);
-		else
-			(void)awacs_volume_setter(data, 4, MASK_CMUTE, 6);
-		/* fall though */
-	case SOUND_MIXER_READ_SPEAKER:
-		rc = IOCTL_OUT(arg, spk_vol);
-		break;
-	case SOUND_MIXER_WRITE_ALTPCM:	/* really bell volume */
-		IOCTL_IN(arg, data);
-		beep_vol = data & 0xff;
-		/* fall through */
-	case SOUND_MIXER_READ_ALTPCM:
-		rc = IOCTL_OUT(arg, beep_vol);
-		break;
-	case SOUND_MIXER_WRITE_LINE:
-		IOCTL_IN(arg, data);
-		do_line_lev(data) ;
-		/* fall through */
-	case SOUND_MIXER_READ_LINE:
-		rc = IOCTL_OUT(arg, line_lev);
-		break;
-	case SOUND_MIXER_WRITE_IGAIN:
-		IOCTL_IN(arg, data);
-		do_ip_gain(data) ;
-		/* fall through */
-	case SOUND_MIXER_READ_IGAIN:
-		rc = IOCTL_OUT(arg, ip_gain);
-		break;
-	case SOUND_MIXER_WRITE_MIC:
-		IOCTL_IN(arg, data);
-		do_mic_lev(data);
-		/* fall through */
-	case SOUND_MIXER_READ_MIC:
-		rc = IOCTL_OUT(arg, mic_lev);
-		break;
-	case SOUND_MIXER_WRITE_CD:
-		IOCTL_IN(arg, data);
-		do_cd_lev(data);
-		/* fall through */
-	case SOUND_MIXER_READ_CD:
-		rc = IOCTL_OUT(arg, cd_lev);
-		break;
-	case SOUND_MIXER_WRITE_RECLEV:
-		IOCTL_IN(arg, data);
-		do_rec_lev(data) ;
-		/* fall through */
-	case SOUND_MIXER_READ_RECLEV:
-		rc = IOCTL_OUT(arg, rec_lev);
-		break;
-	case MIXER_WRITE(SOUND_MIXER_MONITOR):
-		IOCTL_IN(arg, data);
-		do_passthru_vol(data) ;
-		/* fall through */
-	case MIXER_READ(SOUND_MIXER_MONITOR):
-		rc = IOCTL_OUT(arg, passthru_vol);
-		break;
-	default:
-		rc = -EINVAL;
-	}
-	
-	return rc;
-}
-
-static void awacs_mixer_init(void)
-{
-	awacs_volume_setter(line_vol, 2, 0, 6);
-	if (has_perch)
-		awacs_enable_amp(spk_vol);
-	else
-		(void)awacs_volume_setter(spk_vol, 4, MASK_CMUTE, 6);
-	do_line_lev(line_lev) ;
-	do_ip_gain(ip_gain) ;
-	do_mic_lev(mic_lev) ;
-	do_cd_lev(cd_lev) ;
-	do_rec_lev(rec_lev) ;
-	do_passthru_vol(passthru_vol) ;
-}
-
-static int burgundy_mixer_ioctl(u_int cmd, u_long arg)
-{
-	int data;
-	int rc;
-
-	/* We are, we are, we are... Burgundy or better */
-	switch(cmd) {
-	case SOUND_MIXER_READ_DEVMASK:
-		data = SOUND_MASK_VOLUME | SOUND_MASK_CD |
-			SOUND_MASK_LINE | SOUND_MASK_MIC |
-			SOUND_MASK_SPEAKER | SOUND_MASK_ALTPCM;
-		rc = IOCTL_OUT(arg, data);
-		break;
-	case SOUND_MIXER_READ_RECMASK:
-		data = SOUND_MASK_LINE | SOUND_MASK_MIC
-			| SOUND_MASK_CD;
-		rc = IOCTL_OUT(arg, data);
-		break;
-	case SOUND_MIXER_READ_RECSRC:
-		data = 0;
-		if (awacs_reg[0] & MASK_MUX_AUDIN)
-			data |= SOUND_MASK_LINE;
-		if (awacs_reg[0] & MASK_MUX_MIC)
-			data |= SOUND_MASK_MIC;
-		if (awacs_reg[0] & MASK_MUX_CD)
-			data |= SOUND_MASK_CD;
-		rc = IOCTL_OUT(arg, data);
-		break;
-	case SOUND_MIXER_WRITE_RECSRC:
-		IOCTL_IN(arg, data);
-		data &= (SOUND_MASK_LINE
-			 | SOUND_MASK_MIC | SOUND_MASK_CD);
-		awacs_reg[0] &= ~(MASK_MUX_CD | MASK_MUX_MIC
-				  | MASK_MUX_AUDIN);
-		if (data & SOUND_MASK_LINE)
-			awacs_reg[0] |= MASK_MUX_AUDIN;
-		if (data & SOUND_MASK_MIC)
-			awacs_reg[0] |= MASK_MUX_MIC;
-		if (data & SOUND_MASK_CD)
-			awacs_reg[0] |= MASK_MUX_CD;
-		awacs_write(awacs_reg[0] | MASK_ADDR0);
-		rc = IOCTL_OUT(arg, data);
-		break;
-	case SOUND_MIXER_READ_STEREODEVS:
-		data = SOUND_MASK_VOLUME | SOUND_MASK_SPEAKER
-			| SOUND_MASK_RECLEV | SOUND_MASK_CD
-			| SOUND_MASK_LINE;
-		rc = IOCTL_OUT(arg, data);
-		break;
-	case SOUND_MIXER_READ_CAPS:
-		rc = IOCTL_OUT(arg, 0);
-		break;
-	case SOUND_MIXER_WRITE_VOLUME:
-		IOCTL_IN(arg, data);
-		awacs_burgundy_write_mvolume(MASK_ADDR_BURGUNDY_MASTER_VOLUME, data);
-				/* Fall through */
-	case SOUND_MIXER_READ_VOLUME:
-		rc = IOCTL_OUT(arg, awacs_burgundy_read_mvolume(MASK_ADDR_BURGUNDY_MASTER_VOLUME));
-		break;
-	case SOUND_MIXER_WRITE_SPEAKER:
-		IOCTL_IN(arg, data);
-		if (!(data & 0xff)) {
-			/* Mute the left speaker */
-			awacs_burgundy_wcb(MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES,
-					   awacs_burgundy_rcb(MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES) & ~0x2);
-		} else {
-			/* Unmute the left speaker */
-			awacs_burgundy_wcb(MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES,
-					   awacs_burgundy_rcb(MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES) | 0x2);
-		}
-		if (!(data & 0xff00)) {
-			/* Mute the right speaker */
-			awacs_burgundy_wcb(MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES,
-					   awacs_burgundy_rcb(MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES) & ~0x4);
-		} else {
-			/* Unmute the right speaker */
-			awacs_burgundy_wcb(MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES,
-					   awacs_burgundy_rcb(MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES) | 0x4);
-		}
-
-		data = (((data&0xff)*16)/100 > 0xf ? 0xf :
-			(((data&0xff)*16)/100)) +
-			((((data>>8)*16)/100 > 0xf ? 0xf :
-			  ((((data>>8)*16)/100)))<<4);
-
-		awacs_burgundy_wcb(MASK_ADDR_BURGUNDY_ATTENSPEAKER, ~data);
-				/* Fall through */
-	case SOUND_MIXER_READ_SPEAKER:
-		data = awacs_burgundy_rcb(MASK_ADDR_BURGUNDY_ATTENSPEAKER);
-		data = (((data & 0xf)*100)/16) + ((((data>>4)*100)/16)<<8);
-		rc = IOCTL_OUT(arg, (~data) & 0x0000ffff);
-		break;
-	case SOUND_MIXER_WRITE_ALTPCM:	/* really bell volume */
-		IOCTL_IN(arg, data);
-		beep_vol = data & 0xff;
-				/* fall through */
-	case SOUND_MIXER_READ_ALTPCM:
-		rc = IOCTL_OUT(arg, beep_vol);
-		break;
-	case SOUND_MIXER_WRITE_LINE:
-		IOCTL_IN(arg, data);
-		awacs_burgundy_write_volume(MASK_ADDR_BURGUNDY_VOLLINE, data);
-
-				/* fall through */
-	case SOUND_MIXER_READ_LINE:
-		data = awacs_burgundy_read_volume(MASK_ADDR_BURGUNDY_VOLLINE);
-		rc = IOCTL_OUT(arg, data);
-		break;
-	case SOUND_MIXER_WRITE_MIC:
-		IOCTL_IN(arg, data);
-				/* Mic is mono device */
-		data = (data << 8) + (data << 24);
-		awacs_burgundy_write_volume(MASK_ADDR_BURGUNDY_VOLMIC, data);
-				/* fall through */
-	case SOUND_MIXER_READ_MIC:
-		data = awacs_burgundy_read_volume(MASK_ADDR_BURGUNDY_VOLMIC);
-		data <<= 24;
-		rc = IOCTL_OUT(arg, data);
-		break;
-	case SOUND_MIXER_WRITE_CD:
-		IOCTL_IN(arg, data);
-		awacs_burgundy_write_volume(MASK_ADDR_BURGUNDY_VOLCD, data);
-				/* fall through */
-	case SOUND_MIXER_READ_CD:
-		data = awacs_burgundy_read_volume(MASK_ADDR_BURGUNDY_VOLCD);
-		rc = IOCTL_OUT(arg, data);
-		break;
-	case SOUND_MIXER_WRITE_RECLEV:
-		IOCTL_IN(arg, data);
-		data = awacs_volume_setter(data, 0, 0, 4);
-		rc = IOCTL_OUT(arg, data);
-		break;
-	case SOUND_MIXER_READ_RECLEV:
-		data = awacs_get_volume(awacs_reg[0], 4);
-		rc = IOCTL_OUT(arg, data);
-		break;
-	case SOUND_MIXER_OUTMASK:
-	case SOUND_MIXER_OUTSRC:
-	default:
-		rc = -EINVAL;
-	}
-	
-	return rc;
-}
-
-static int daca_mixer_ioctl(u_int cmd, u_long arg)
-{
-	int data;
-	int rc;
-
-	/* And the DACA's no genius either! */
-
-	switch(cmd) {
-	case SOUND_MIXER_READ_DEVMASK:
-		data = SOUND_MASK_VOLUME;
-		rc = IOCTL_OUT(arg, data);
-		break;
-	case SOUND_MIXER_READ_RECMASK:
-		data = 0;
-		rc = IOCTL_OUT(arg, data);
-		break;
-	case SOUND_MIXER_READ_RECSRC:
-		data = 0;
-		rc = IOCTL_OUT(arg, data);
-		break;
-	case SOUND_MIXER_WRITE_RECSRC:
-		IOCTL_IN(arg, data);
-		data =0;
-		rc = IOCTL_OUT(arg, data);
-		break;
-	case SOUND_MIXER_READ_STEREODEVS:
-		data = SOUND_MASK_VOLUME;
-		rc = IOCTL_OUT(arg, data);
-		break;
-	case SOUND_MIXER_READ_CAPS:
-		rc = IOCTL_OUT(arg, 0);
-		break;
-	case SOUND_MIXER_WRITE_VOLUME:
-		IOCTL_IN(arg, data);
-		daca_set_volume(data, data);
-		/* Fall through */
-	case SOUND_MIXER_READ_VOLUME:
-		daca_get_volume(& data, &data);
-		rc = IOCTL_OUT(arg, data);
-		break;
-	case SOUND_MIXER_OUTMASK:
-	case SOUND_MIXER_OUTSRC:
-	default:
-		rc = -EINVAL;
-	}
-	return rc;
-}
-
-static int PMacMixerIoctl(u_int cmd, u_long arg)
-{
-	int rc;
-	
-	/* Different IOCTLS for burgundy and, eventually, DACA & Tumbler */
-
-	TRY_LOCK();
-	
-	switch (awacs_revision){
-		case AWACS_BURGUNDY:
-			rc = burgundy_mixer_ioctl(cmd, arg);
-			break ;
-		case AWACS_DACA:
-			rc = daca_mixer_ioctl(cmd, arg);
-			break;
-		case AWACS_TUMBLER:
-		case AWACS_SNAPPER:
-			rc = tas_mixer_ioctl(cmd, arg);
-			break ;
-		default: /* ;-)) */
-			rc = awacs_mixer_ioctl(cmd, arg);
-	}
-
-	UNLOCK();
-	
-	return rc;
-}
-
-static void PMacMixerInit(void)
-{
-	switch (awacs_revision) {
-		case AWACS_TUMBLER:
-		  printk("AE-Init tumbler mixer\n");
-		  break ;
-		case AWACS_SNAPPER:
-		  printk("AE-Init snapper mixer\n");
-		  break ;
-		case AWACS_DACA:
-		case AWACS_BURGUNDY:
-			break ;	/* don't know yet */
-		case AWACS_AWACS:
-		case AWACS_SCREAMER:
-		default:
-			awacs_mixer_init() ;
-			break ;
-	}
-}
-
-/* Write/Read sq setup functions:
-   Check to see if we have enough (or any) dbdma cmd buffers for the
-   user's fragment settings.  If not, allocate some. If this fails we will
-   point at the beep buffer - as an emergency provision - to stop dma tromping
-   on some random bit of memory (if someone lets it go anyway).
-   The command buffers are then set up to point to the fragment buffers
-   (allocated elsewhere).  We need n+1 commands the last of which holds
-   a NOP + loop to start.
-*/
-
-static int PMacWriteSqSetup(void)
-{
-	int i, count = 600 ;
-	volatile struct dbdma_cmd *cp;
-
-	LOCK();
-	
-	/* stop the controller from doing any output - if it isn't already.
-	   it _should_ be before this is called anyway */
-
-	out_le32(&awacs_txdma->control, (RUN|PAUSE|FLUSH|WAKE) << 16);
-	while ((in_le32(&awacs_txdma->status) & RUN) && count--)
-		udelay(1);
-#ifdef DEBUG_DMASOUND
-if (count <= 0)
-	printk("dmasound_pmac: write sq setup: timeout waiting for dma to stop\n");
-#endif
-
-	if ((write_sq.max_count + 1) > number_of_tx_cmd_buffers) {
-		kfree(awacs_tx_cmd_space);
-		number_of_tx_cmd_buffers = 0;
-
-		/* we need nbufs + 1 (for the loop) and we should request + 1
-		   again because the DBDMA_ALIGN might pull the start up by up
-		   to sizeof(struct dbdma_cmd) - 4.
-		*/
-
-		awacs_tx_cmd_space = kmalloc
-			((write_sq.max_count + 1 + 1) * sizeof(struct dbdma_cmd),
-			 GFP_KERNEL);
-		if (awacs_tx_cmd_space == NULL) {
-			/* don't leave it dangling - nasty but better than a
-			   random address */
-			out_le32(&awacs_txdma->cmdptr, virt_to_bus(beep_dbdma_cmd));
-			printk(KERN_ERR
-			   "dmasound_pmac: can't allocate dbdma cmd buffers"
-			   ", driver disabled\n");
-			UNLOCK();
-			return -ENOMEM;
-		}
-		awacs_tx_cmds = (volatile struct dbdma_cmd *)
-			DBDMA_ALIGN(awacs_tx_cmd_space);
-		number_of_tx_cmd_buffers = write_sq.max_count + 1;
-	}
-
-	cp = awacs_tx_cmds;
-	memset((void *)cp, 0, (write_sq.max_count+1) * sizeof(struct dbdma_cmd));
-	for (i = 0; i < write_sq.max_count; ++i, ++cp) {
-		st_le32(&cp->phy_addr, virt_to_bus(write_sq.buffers[i]));
-	}
-	st_le16(&cp->command, DBDMA_NOP + BR_ALWAYS);
-	st_le32(&cp->cmd_dep, virt_to_bus(awacs_tx_cmds));
-	/* point the controller at the command stack - ready to go */
-	out_le32(&awacs_txdma->cmdptr, virt_to_bus(awacs_tx_cmds));
-	UNLOCK();
-	return 0;
-}
-
-static int PMacReadSqSetup(void)
-{
-	int i, count = 600;
-	volatile struct dbdma_cmd *cp;
-
-	LOCK();
-	
-	/* stop the controller from doing any input - if it isn't already.
-	   it _should_ be before this is called anyway */
-	
-	out_le32(&awacs_rxdma->control, (RUN|PAUSE|FLUSH|WAKE) << 16);
-	while ((in_le32(&awacs_rxdma->status) & RUN) && count--)
-		udelay(1);
-#ifdef DEBUG_DMASOUND
-if (count <= 0)
-	printk("dmasound_pmac: read sq setup: timeout waiting for dma to stop\n");
-#endif
-
-	if ((read_sq.max_count+1) > number_of_rx_cmd_buffers ) {
-		kfree(awacs_rx_cmd_space);
-		number_of_rx_cmd_buffers = 0;
-
-		/* we need nbufs + 1 (for the loop) and we should request + 1 again
-		   because the DBDMA_ALIGN might pull the start up by up to
-		   sizeof(struct dbdma_cmd) - 4 (assuming kmalloc aligns 32 bits).
-		*/
-
-		awacs_rx_cmd_space = kmalloc
-			((read_sq.max_count + 1 + 1) * sizeof(struct dbdma_cmd),
-			 GFP_KERNEL);
-		if (awacs_rx_cmd_space == NULL) {
-			/* don't leave it dangling - nasty but better than a
-			   random address */
-			out_le32(&awacs_rxdma->cmdptr, virt_to_bus(beep_dbdma_cmd));
-			printk(KERN_ERR
-			   "dmasound_pmac: can't allocate dbdma cmd buffers"
-			   ", driver disabled\n");
-			UNLOCK();
-			return -ENOMEM;
-		}
-		awacs_rx_cmds = (volatile struct dbdma_cmd *)
-			DBDMA_ALIGN(awacs_rx_cmd_space);
-		number_of_rx_cmd_buffers = read_sq.max_count + 1 ;
-	}
-	cp = awacs_rx_cmds;
-	memset((void *)cp, 0, (read_sq.max_count+1) * sizeof(struct dbdma_cmd));
-
-	/* Set dma buffers up in a loop */
-	for (i = 0; i < read_sq.max_count; i++,cp++) {
-		st_le32(&cp->phy_addr, virt_to_bus(read_sq.buffers[i]));
-		st_le16(&cp->command, INPUT_MORE + INTR_ALWAYS);
-		st_le16(&cp->req_count, read_sq.block_size);
-		st_le16(&cp->xfer_status, 0);
-	}
-
-	/* The next two lines make the thing loop around.
-	*/
-	st_le16(&cp->command, DBDMA_NOP + BR_ALWAYS);
-	st_le32(&cp->cmd_dep, virt_to_bus(awacs_rx_cmds));
-	/* point the controller at the command stack - ready to go */
-	out_le32(&awacs_rxdma->cmdptr, virt_to_bus(awacs_rx_cmds));
-
-	UNLOCK();
-	return 0;
-}
-
-/* TODO: this needs work to guarantee that when it returns DMA has stopped
-   but in a more elegant way than is done here....
-*/
-
-static void PMacAbortRead(void)
-{
-	int i;
-	volatile struct dbdma_cmd *cp;
-
-	LOCK();
-	/* give it a chance to update the output and provide the IRQ
-	   that is expected.
-	*/
-
-	out_le32(&awacs_rxdma->control, ((FLUSH) << 16) + FLUSH );
-
-	cp = awacs_rx_cmds;
-	for (i = 0; i < read_sq.max_count; i++,cp++)
-		st_le16(&cp->command, DBDMA_STOP);
-	/*
-	 * We should probably wait for the thing to stop before we
-	 * release the memory.
-	 */
-
-	msleep(100) ; /* give it a (small) chance to act */
-
-	/* apply the sledgehammer approach - just stop it now */
-
-	out_le32(&awacs_rxdma->control, (RUN|PAUSE|FLUSH|WAKE) << 16);
-	UNLOCK();
-}
-
-extern char *get_afmt_string(int);
-static int PMacStateInfo(char *b, size_t sp)
-{
-	int i, len = 0;
-	len = sprintf(b,"HW rates: ");
-	switch (awacs_revision){
-		case AWACS_DACA:
-		case AWACS_BURGUNDY:
-			len += sprintf(b,"44100 ") ;
-			break ;
-		case AWACS_TUMBLER:
-		case AWACS_SNAPPER:
-			for (i=0; i<1; i++){
-				if (tas_freqs_ok[i])
-					len += sprintf(b+len,"%d ", tas_freqs[i]) ;
-			}
-			break ;
-		case AWACS_AWACS:
-		case AWACS_SCREAMER:
-		default:
-			for (i=0; i<8; i++){
-				if (awacs_freqs_ok[i])
-					len += sprintf(b+len,"%d ", awacs_freqs[i]) ;
-			}
-			break ;
-	}
-	len += sprintf(b+len,"s/sec\n") ;
-	if (len < sp) {
-		len += sprintf(b+len,"HW AFMTS: ");
-		i = AFMT_U16_BE ;
-		while (i) {
-			if (i & dmasound.mach.hardware_afmts)
-				len += sprintf(b+len,"%s ",
-					get_afmt_string(i & dmasound.mach.hardware_afmts));
-			i >>= 1 ;
-		}
-		len += sprintf(b+len,"\n") ;
-	}
-	return len ;
-}
-
-/*** Machine definitions *****************************************************/
-
-static SETTINGS def_hard = {
-	.format	= AFMT_S16_BE,
-	.stereo	= 1,
-	.size	= 16,
-	.speed	= 44100
-} ;
-
-static SETTINGS def_soft = {
-	.format	= AFMT_S16_BE,
-	.stereo	= 1,
-	.size	= 16,
-	.speed	= 44100
-} ;
-
-static MACHINE machPMac = {
-	.name		= awacs_name,
-	.name2		= "PowerMac Built-in Sound",
-	.owner		= THIS_MODULE,
-	.dma_alloc	= PMacAlloc,
-	.dma_free	= PMacFree,
-	.irqinit	= PMacIrqInit,
-#ifdef MODULE
-	.irqcleanup	= PMacIrqCleanup,
-#endif /* MODULE */
-	.init		= PMacInit,
-	.silence	= PMacSilence,
-	.setFormat	= PMacSetFormat,
-	.setVolume	= PMacSetVolume,
-	.play		= PMacPlay,
-	.record		= NULL,		/* default to no record */
-	.mixer_init	= PMacMixerInit,
-	.mixer_ioctl	= PMacMixerIoctl,
-	.write_sq_setup	= PMacWriteSqSetup,
-	.read_sq_setup	= PMacReadSqSetup,
-	.state_info	= PMacStateInfo,
-	.abort_read	= PMacAbortRead,
-	.min_dsp_speed	= 7350,
-	.max_dsp_speed	= 44100,
-	.version	= ((DMASOUND_AWACS_REVISION<<8) + DMASOUND_AWACS_EDITION)
-};
-
-
-/*** Config & Setup **********************************************************/
-
-/* Check for pmac models that we care about in terms of special actions.
-*/
-
-void __init
-set_model(void)
-{
-	/* portables/lap-tops */
-
-	if (machine_is_compatible("AAPL,3400/2400") ||
-	    machine_is_compatible("AAPL,3500"))	{
-		is_pbook_3X00 = 1 ;
-	}
-	if (machine_is_compatible("PowerBook1,1")  || /* lombard */
-	    machine_is_compatible("AAPL,PowerBook1998")){ /* wallstreet */
-		is_pbook_g3 = 1 ;
-		return ;
-	}
-}
-
-/* Get the OF node that tells us about the registers, interrupts etc. to use
-   for sound IO.
-
-   On most machines the sound IO OF node is the 'davbus' node.  On newer pmacs
-   with DACA (& Tumbler) the node to use is i2s-a.  On much older machines i.e.
-   before 9500 there is no davbus node and we have to use the 'awacs' property.
-
-  In the latter case we signal this by setting the codec value - so that the
-  code that looks for chip properties knows how to go about it.
-*/
-
-static struct device_node* __init
-get_snd_io_node(void)
-{
-	struct device_node *np;
-
-	/* set up awacs_node for early OF which doesn't have a full set of
-	 * properties on davbus
-	 */
-	awacs_node = of_find_node_by_name(NULL, "awacs");
-	if (awacs_node)
-		awacs_revision = AWACS_AWACS;
-
-	/* powermac models after 9500 (other than those which use DACA or
-	 * Tumbler) have a node called "davbus".
-	 */
-	np = of_find_node_by_name(NULL, "davbus");
-	/*
-	 * if we didn't find a davbus device, try 'i2s-a' since
-	 * this seems to be what iBooks (& Tumbler) have.
-	 */
-	if (np == NULL) {
-		i2s_node = of_find_node_by_name(NULL, "i2s-a");
-		np = of_node_get(i2s_node);
-	}
-
-	/* if we didn't find this - perhaps we are on an early model
-	 * which _only_ has an 'awacs' node
-	*/
-	if (np == NULL && awacs_node)
-		np = of_node_get(awacs_node);
-
-	/* if we failed all these return null - this will cause the
-	 * driver to give up...
-	*/
-	return np ;
-}
-
-/* Get the OF node that contains the info about the sound chip, inputs s-rates
-   etc.
-   This node does not exist (or contains much reduced info) on earlier machines
-   we have to deduce the info other ways for these.
-*/
-
-static struct device_node* __init
-get_snd_info_node(struct device_node *io)
-{
-	struct device_node *info;
-
-	for_each_node_by_name(info, "sound")
-		if (info->parent == io)
-			break;
-	return info;
-}
-
-/* Find out what type of codec we have.
-*/
-
-static int __init
-get_codec_type(struct device_node *info)
-{
-	/* already set if pre-davbus model and info will be NULL */
-	int codec = awacs_revision ;
-
-	if (info) {
-		/* must do awacs first to allow screamer to overide it */
-		if (of_device_is_compatible(info, "awacs"))
-			codec = AWACS_AWACS ;
-		if (of_device_is_compatible(info, "screamer"))
-			codec = AWACS_SCREAMER;
-		if (of_device_is_compatible(info, "burgundy"))
-			codec = AWACS_BURGUNDY ;
-		if (of_device_is_compatible(info, "daca"))
-			codec = AWACS_DACA;
-		if (of_device_is_compatible(info, "tumbler"))
-			codec = AWACS_TUMBLER;
-		if (of_device_is_compatible(info, "snapper"))
-			codec = AWACS_SNAPPER;
-	}
-	return codec ;
-}
-
-/* find out what type, if any, of expansion card we have
-*/
-static void __init
-get_expansion_type(void)
-{
-	struct device_node *dn;
-
-	dn = of_find_node_by_name(NULL, "perch");
-	if (dn != NULL)
-		has_perch = 1;
-	of_node_put(dn);
-
-	dn = of_find_node_by_name(NULL, "pb-ziva-pc");
-	if (dn != NULL)
-		has_ziva = 1;
-	of_node_put(dn);
-	/* need to work out how we deal with iMac SRS module */
-}
-
-/* set up frame rates.
- * I suspect that these routines don't quite go about it the right way:
- * - where there is more than one rate - I think that the first property
- * value is the number of rates.
- * TODO: check some more device trees and modify accordingly
- *       Set dmasound.mach.max_dsp_rate on the basis of these routines.
-*/
-
-static void __init
-awacs_init_frame_rates(const unsigned int *prop, unsigned int l)
-{
-	int i ;
-	if (prop) {
-		for (i=0; i<8; i++)
-			awacs_freqs_ok[i] = 0 ;
-		for (l /= sizeof(int); l > 0; --l) {
-			unsigned int r = *prop++;
-			/* Apple 'Fixed' format */
-			if (r >= 0x10000)
-				r >>= 16;
-			for (i = 0; i < 8; ++i) {
-				if (r == awacs_freqs[i]) {
-					awacs_freqs_ok[i] = 1;
-					break;
-				}
-			}
-		}
-	}
-	/* else we assume that all the rates are available */
-}
-
-static void __init
-burgundy_init_frame_rates(const unsigned int *prop, unsigned int l)
-{
-	int temp[9] ;
-	int i = 0 ;
-	if (prop) {
-		for (l /= sizeof(int); l > 0; --l) {
-			unsigned int r = *prop++;
-			/* Apple 'Fixed' format */
-			if (r >= 0x10000)
-				r >>= 16;
-			temp[i] = r ;
-			i++ ; if(i>=9) i=8;
-		}
-	}
-#ifdef DEBUG_DMASOUND
-if (i > 1){
-	int j;
-	printk("dmasound_pmac: burgundy with multiple frame rates\n");
-	for(j=0; j<i; j++)
-		printk("%d ", temp[j]) ;
-	printk("\n") ;
-}
-#endif
-}
-
-static void __init
-daca_init_frame_rates(const unsigned int *prop, unsigned int l)
-{
-	int temp[9] ;
-	int i = 0 ;
-	if (prop) {
-		for (l /= sizeof(int); l > 0; --l) {
-			unsigned int r = *prop++;
-			/* Apple 'Fixed' format */
-			if (r >= 0x10000)
-				r >>= 16;
-			temp[i] = r ;
-			i++ ; if(i>=9) i=8;
-
-		}
-	}
-#ifdef DEBUG_DMASOUND
-if (i > 1){
-	int j;
-	printk("dmasound_pmac: DACA with multiple frame rates\n");
-	for(j=0; j<i; j++)
-		printk("%d ", temp[j]) ;
-	printk("\n") ;
-}
-#endif
-}
-
-static void __init
-init_frame_rates(const unsigned int *prop, unsigned int l)
-{
-	switch (awacs_revision) {
-		case AWACS_TUMBLER:
-		case AWACS_SNAPPER:
-			tas_init_frame_rates(prop, l);
-			break ;
-		case AWACS_DACA:
-			daca_init_frame_rates(prop, l);
-			break ;
-		case AWACS_BURGUNDY:
-			burgundy_init_frame_rates(prop, l);
-			break ;
-		default:
-			awacs_init_frame_rates(prop, l);
-			break ;
-	}
-}
-
-/* find things/machines that can't do mac-io byteswap
-*/
-
-static void __init
-set_hw_byteswap(struct device_node *io)
-{
-	struct device_node *mio ;
-	unsigned int kl = 0 ;
-
-	/* if seems that Keylargo can't byte-swap  */
-
-	for (mio = io->parent; mio ; mio = mio->parent) {
-		if (strcmp(mio->name, "mac-io") == 0) {
-			if (of_device_is_compatible(mio, "Keylargo"))
-				kl = 1;
-			break;
-		}
-	}
-	hw_can_byteswap = !kl;
-}
-
-/* Allocate the resources necessary for beep generation.  This cannot be (quite)
-   done statically (yet) because we cannot do virt_to_bus() on static vars when
-   the code is loaded as a module.
-
-   for the sake of saving the possibility that two allocations will incur the
-   overhead of two pull-ups in DBDMA_ALIGN() we allocate the 'emergency' dmdma
-   command here as well... even tho' it is not part of the beep process.
-*/
-
-int32_t
-__init setup_beep(void)
-{
-	/* Initialize beep stuff */
-	/* want one cmd buffer for beeps, and a second one for emergencies
-	   - i.e. dbdma error conditions.
-	   ask for three to allow for pull up in DBDMA_ALIGN().
-	*/
-	beep_dbdma_cmd_space =
-		kmalloc((2 + 1) * sizeof(struct dbdma_cmd), GFP_KERNEL);
-	if(beep_dbdma_cmd_space == NULL) {
-		printk(KERN_ERR "dmasound_pmac: no beep dbdma cmd space\n") ;
-		return -ENOMEM ;
-	}
-	beep_dbdma_cmd = (volatile struct dbdma_cmd *)
-			DBDMA_ALIGN(beep_dbdma_cmd_space);
-	/* set up emergency dbdma cmd */
-	emergency_dbdma_cmd = beep_dbdma_cmd+1 ;
-	beep_buf = kmalloc(BEEP_BUFLEN * 4, GFP_KERNEL);
-	if (beep_buf == NULL) {
-		printk(KERN_ERR "dmasound_pmac: no memory for beep buffer\n");
-		kfree(beep_dbdma_cmd_space) ;
-		return -ENOMEM ;
-	}
-	return 0 ;
-}
-
-static struct input_dev *awacs_beep_dev;
-
-int __init dmasound_awacs_init(void)
-{
-	struct device_node *io = NULL, *info = NULL;
-	int vol, res;
-
-	if (!machine_is(powermac))
-		return -ENODEV;
-
-	awacs_subframe = 0;
-	awacs_revision = 0;
-	hw_can_byteswap = 1 ; /* most can */
-
-	/* look for models we need to handle specially */
-	set_model() ;
-
-	/* find the OF node that tells us about the dbdma stuff
-	*/
-	io = get_snd_io_node();
-	if (io == NULL) {
-#ifdef DEBUG_DMASOUND
-printk("dmasound_pmac: couldn't find sound io OF node\n");
-#endif
-		goto no_device;
-	}
-
-	/* find the OF node that tells us about the sound sub-system
-	 * this doesn't exist on pre-davbus machines (earlier than 9500)
-	*/
-	if (awacs_revision != AWACS_AWACS) { /* set for pre-davbus */
-		info = get_snd_info_node(io) ;
-		if (info == NULL){
-#ifdef DEBUG_DMASOUND
-printk("dmasound_pmac: couldn't find 'sound' OF node\n");
-#endif
-			goto no_device;
-		}
-	}
-
-	awacs_revision = get_codec_type(info) ;
-	if (awacs_revision == 0) {
-#ifdef DEBUG_DMASOUND
-printk("dmasound_pmac: couldn't find a Codec we can handle\n");
-#endif
-		goto no_device; /* we don't know this type of h/w */
-	}
-
-	/* set up perch, ziva, SRS or whatever else we have as sound
-	 *  expansion.
-	*/
-	get_expansion_type();
-
-	/* we've now got enough information to make up the audio topology.
-	 * we will map the sound part of mac-io now so that we can probe for
-	 * other info if necessary (early AWACS we want to read chip ids)
-	 */
-
-	if (of_get_address(io, 2, NULL, NULL) == NULL) {
-		/* OK - maybe we need to use the 'awacs' node (on earlier
-		 * machines).
-		 */
-		if (awacs_node) {
-			of_node_put(io);
-			io = of_node_get(awacs_node);
-			if (of_get_address(io, 2, NULL, NULL) == NULL) {
-				printk("dmasound_pmac: can't use %s\n",
-				       io->full_name);
-				goto no_device;
-			}
-		} else
-			printk("dmasound_pmac: can't use %s\n", io->full_name);
-	}
-
-	if (of_address_to_resource(io, 0, &awacs_rsrc[0]) ||
-	    request_mem_region(awacs_rsrc[0].start,
-			       awacs_rsrc[0].end - awacs_rsrc[0].start + 1,
-			       " (IO)") == NULL) {
-		printk(KERN_ERR "dmasound: can't request IO resource !\n");
-		goto no_device;
-	}
-	if (of_address_to_resource(io, 1, &awacs_rsrc[1]) ||
-	    request_mem_region(awacs_rsrc[1].start,
-			       awacs_rsrc[1].end - awacs_rsrc[1].start + 1,
-			       " (tx dma)") == NULL) {
-		release_mem_region(awacs_rsrc[0].start,
-				   awacs_rsrc[0].end - awacs_rsrc[0].start + 1);
-		printk(KERN_ERR "dmasound: can't request Tx DMA resource !\n");
-		goto no_device;
-	}
-	if (of_address_to_resource(io, 2, &awacs_rsrc[2]) ||
-	    request_mem_region(awacs_rsrc[2].start,
-			       awacs_rsrc[2].end - awacs_rsrc[2].start + 1,
-			       " (rx dma)") == NULL) {
-		release_mem_region(awacs_rsrc[0].start,
-				   awacs_rsrc[0].end - awacs_rsrc[0].start + 1);
-		release_mem_region(awacs_rsrc[1].start,
-				   awacs_rsrc[1].end - awacs_rsrc[1].start + 1);
-		printk(KERN_ERR "dmasound: can't request Rx DMA resource !\n");
-		goto no_device;
-	}
-
-	awacs_beep_dev = input_allocate_device();
-	if (!awacs_beep_dev) {
-		release_mem_region(awacs_rsrc[0].start,
-				   awacs_rsrc[0].end - awacs_rsrc[0].start + 1);
-		release_mem_region(awacs_rsrc[1].start,
-				   awacs_rsrc[1].end - awacs_rsrc[1].start + 1);
-		release_mem_region(awacs_rsrc[2].start,
-				   awacs_rsrc[2].end - awacs_rsrc[2].start + 1);
-		printk(KERN_ERR "dmasound: can't allocate input device !\n");
-		goto no_device;
-	}
-
-	awacs_beep_dev->name = "dmasound beeper";
-	awacs_beep_dev->phys = "macio/input0";
-	awacs_beep_dev->id.bustype = BUS_HOST;
-	awacs_beep_dev->event = awacs_beep_event;
-	awacs_beep_dev->sndbit[0] = BIT(SND_BELL) | BIT(SND_TONE);
-	awacs_beep_dev->evbit[0] = BIT(EV_SND);
-
-	/* all OF versions I've seen use this value */
-	if (i2s_node)
-		i2s = ioremap(awacs_rsrc[0].start, 0x1000);
-	else
-		awacs = ioremap(awacs_rsrc[0].start, 0x1000);
-	awacs_txdma = ioremap(awacs_rsrc[1].start, 0x100);
-	awacs_rxdma = ioremap(awacs_rsrc[2].start, 0x100);
-
-	/* first of all make sure that the chip is powered up....*/
-	pmac_call_feature(PMAC_FTR_SOUND_CHIP_ENABLE, io, 0, 1);
-	if (awacs_revision == AWACS_SCREAMER && awacs)
-		awacs_recalibrate();
-
-	awacs_irq = irq_of_parse_and_map(io, 0);
-	awacs_tx_irq = irq_of_parse_and_map(io, 1);
-	awacs_rx_irq = irq_of_parse_and_map(io, 2);
-
-	/* Hack for legacy crap that will be killed someday */
-	of_node_put(awacs_node);
-	awacs_node = of_node_get(io);
-
-	/* if we have an awacs or screamer - probe the chip to make
-	 * sure we have the right revision.
-	*/
-
-	if (awacs_revision <= AWACS_SCREAMER){
-		uint32_t temp, rev, mfg ;
-		/* find out the awacs revision from the chip */
-		temp = in_le32(&awacs->codec_stat);
-		rev = (temp >> 12) & 0xf;
-		mfg = (temp >>  8) & 0xf;
-#ifdef DEBUG_DMASOUND
-printk("dmasound_pmac: Awacs/Screamer Codec Mfct: %d Rev %d\n", mfg, rev);
-#endif
-		if (rev >= AWACS_SCREAMER)
-			awacs_revision = AWACS_SCREAMER ;
-		else
-			awacs_revision = rev ;
-	}
-
-	dmasound.mach = machPMac;
-
-	/* find out other bits & pieces from OF, these may be present
-	   only on some models ... so be careful.
-	*/
-
-	/* in the absence of a frame rates property we will use the defaults
-	*/
-
-	if (info) {
-		const unsigned int *prop;
-		unsigned int l;
-
-		sound_device_id = 0;
-		/* device ID appears post g3 b&w */
-		prop = of_get_property(info, "device-id", NULL);
-		if (prop != 0)
-			sound_device_id = *prop;
-
-		/* look for a property saying what sample rates
-		   are available */
-
-		prop = of_get_property(info, "sample-rates", &l);
-		if (prop == 0)
-			prop = of_get_property(info, "output-frame-rates", &l);
-
-		/* if it's there use it to set up frame rates */
-		init_frame_rates(prop, l) ;
-		of_node_put(info);
-		info = NULL;
-	}
-
-	if (awacs)
-		out_le32(&awacs->control, 0x11); /* set everything quiesent */
-
-	set_hw_byteswap(io) ; /* figure out if the h/w can do it */
-
-#ifdef CONFIG_NVRAM
-	/* get default volume from nvram */
-	vol = ((pmac_xpram_read( 8 ) & 7 ) << 1 );
-#else
-	vol = 0;
-#endif
-
-	/* set up tracking values */
-	spk_vol = vol * 100 ;
-	spk_vol /= 7 ; /* get set value to a percentage */
-	spk_vol |= (spk_vol << 8) ; /* equal left & right */
- 	line_vol = passthru_vol = spk_vol ;
-
-	/* fill regs that are shared between AWACS & Burgundy */
-
-	awacs_reg[2] = vol + (vol << 6);
-	awacs_reg[4] = vol + (vol << 6);
-	awacs_reg[5] = vol + (vol << 6); /* screamer has loopthru vol control */
-	awacs_reg[6] = 0; /* maybe should be vol << 3 for PCMCIA speaker */
-	awacs_reg[7] = 0;
-
-	awacs_reg[0] = MASK_MUX_CD;
-	awacs_reg[1] = MASK_LOOPTHRU;
-
-	/* FIXME: Only machines with external SRS module need MASK_PAROUT */
-	if (has_perch || sound_device_id == 0x5
-	    || /*sound_device_id == 0x8 ||*/ sound_device_id == 0xb)
-		awacs_reg[1] |= MASK_PAROUT0 | MASK_PAROUT1;
-
-	switch (awacs_revision) {
-		case AWACS_TUMBLER:
-                        tas_register_driver(&tas3001c_hooks);
-			tas_init(I2C_DRIVERID_TAS3001C, I2C_DRIVERNAME_TAS3001C);
-			tas_dmasound_init();
-			tas_post_init();
-			break ;
-		case AWACS_SNAPPER:
-                        tas_register_driver(&tas3004_hooks);
-			tas_init(I2C_DRIVERID_TAS3004,I2C_DRIVERNAME_TAS3004);
-			tas_dmasound_init();
-			tas_post_init();
-			break;
-		case AWACS_DACA:
-			daca_init();
-			break;	
-		case AWACS_BURGUNDY:
-			awacs_burgundy_init();
-			break ;
-		case AWACS_SCREAMER:
-		case AWACS_AWACS:
-		default:
-			load_awacs();
-			break ;
-	}
-
-	/* enable/set-up external modules - when we know how */
-
-	if (has_perch)
-		awacs_enable_amp(100 * 0x101);
-
-	/* Reset dbdma channels */
-	out_le32(&awacs_txdma->control, (RUN|PAUSE|FLUSH|WAKE|DEAD) << 16);
-	while (in_le32(&awacs_txdma->status) & RUN)
-		udelay(1);
-	out_le32(&awacs_rxdma->control, (RUN|PAUSE|FLUSH|WAKE|DEAD) << 16);
-	while (in_le32(&awacs_rxdma->status) & RUN)
-		udelay(1);
-
-	/* Initialize beep stuff */
-	if ((res=setup_beep()))
-		return res ;
-
-#ifdef CONFIG_PM
-	pmu_register_sleep_notifier(&awacs_sleep_notifier);
-#endif /* CONFIG_PM */
-
-	/* Powerbooks have odd ways of enabling inputs such as
-	   an expansion-bay CD or sound from an internal modem
-	   or a PC-card modem. */
-	if (is_pbook_3X00) {
-		/*
-		 * Enable CD and PC-card sound inputs.
-		 * This is done by reading from address
-		 * f301a000, + 0x10 to enable the expansion-bay
-		 * CD sound input, + 0x80 to enable the PC-card
-		 * sound input.  The 0x100 enables the SCSI bus
-		 * terminator power.
-		 */
-		latch_base = ioremap (0xf301a000, 0x1000);
-		in_8(latch_base + 0x190);
-
-	} else if (is_pbook_g3) {
-		struct device_node* mio;
-		macio_base = NULL;
-		for (mio = io->parent; mio; mio = mio->parent) {
-			if (strcmp(mio->name, "mac-io") == 0) {
-				struct resource r;
-				if (of_address_to_resource(mio, 0, &r) == 0)
-					macio_base = ioremap(r.start, 0x40);
-				break;
-			}
-		}
-		/*
-		 * Enable CD sound input.
-		 * The relevant bits for writing to this byte are 0x8f.
-		 * I haven't found out what the 0x80 bit does.
-		 * For the 0xf bits, writing 3 or 7 enables the CD
-		 * input, any other value disables it.  Values
-		 * 1, 3, 5, 7 enable the microphone.  Values 0, 2,
-		 * 4, 6, 8 - f enable the input from the modem.
-		 *  -- paulus.
-		 */
-		if (macio_base)
-			out_8(macio_base + 0x37, 3);
-	}
-
-	if (hw_can_byteswap)
- 		dmasound.mach.hardware_afmts = (AFMT_S16_BE | AFMT_S16_LE) ;
- 	else
-		dmasound.mach.hardware_afmts = AFMT_S16_BE ;
-
-	/* shut out chips that do output only.
-	 * may need to extend this to machines which have no inputs - even tho'
-	 * they use screamer - IIRC one of the powerbooks is like this.
-	 */
-
-	if (awacs_revision != AWACS_DACA) {
-		dmasound.mach.capabilities = DSP_CAP_DUPLEX ;
-		dmasound.mach.record = PMacRecord ;
-	}
-
-	dmasound.mach.default_hard = def_hard ;
-	dmasound.mach.default_soft = def_soft ;
-
-	switch (awacs_revision) {
-		case AWACS_BURGUNDY:
-			sprintf(awacs_name, "PowerMac Burgundy ") ;
-			break ;
-		case AWACS_DACA:
-			sprintf(awacs_name, "PowerMac DACA ") ;
-			break ;
-		case AWACS_TUMBLER:
-			sprintf(awacs_name, "PowerMac Tumbler ") ;
-			break ;
-		case AWACS_SNAPPER:
-			sprintf(awacs_name, "PowerMac Snapper ") ;
-			break ;
-		case AWACS_SCREAMER:
-			sprintf(awacs_name, "PowerMac Screamer ") ;
-			break ;
-		case AWACS_AWACS:
-		default:
-			sprintf(awacs_name, "PowerMac AWACS rev %d ", awacs_revision) ;
-			break ;
-	}
-
-	/*
-	 * XXX: we should handle errors here, but that would mean
-	 * rewriting the whole init code.  later..
-	 */
-	input_register_device(awacs_beep_dev);
-
-	of_node_put(io);
-
-	return dmasound_init();
-
-no_device:
-	of_node_put(info);
-	of_node_put(awacs_node);
-	of_node_put(i2s_node);
-	of_node_put(io);
-	return -ENODEV ;
-}
-
-static void __exit dmasound_awacs_cleanup(void)
-{
-	input_unregister_device(awacs_beep_dev);
-
-	switch (awacs_revision) {
-		case AWACS_TUMBLER:
-		case AWACS_SNAPPER:
-			tas_dmasound_cleanup();
-			tas_cleanup();
-			break ;
-		case AWACS_DACA:
-			daca_cleanup();
-			break;
-	}
-	dmasound_deinit();
-
-	of_node_put(awacs_node);
-	of_node_put(i2s_node);
-}
-
-MODULE_DESCRIPTION("PowerMac built-in audio driver.");
-MODULE_LICENSE("GPL");
-
-module_init(dmasound_awacs_init);
-module_exit(dmasound_awacs_cleanup);
diff --git a/sound/oss/dmasound/dmasound_core.c b/sound/oss/dmasound/dmasound_core.c
index f4056a9..a003c0e 100644
--- a/sound/oss/dmasound/dmasound_core.c
+++ b/sound/oss/dmasound/dmasound_core.c
@@ -202,13 +202,6 @@ module_param(numWriteBufs, int, 0);
 static unsigned int writeBufSize = DEFAULT_BUFF_SIZE ;	/* in bytes */
 module_param(writeBufSize, int, 0);
 
-#ifdef HAS_RECORD
-static unsigned int numReadBufs = DEFAULT_N_BUFFERS;
-module_param(numReadBufs, int, 0);
-static unsigned int readBufSize = DEFAULT_BUFF_SIZE;	/* in bytes */
-module_param(readBufSize, int, 0);
-#endif
-
 MODULE_LICENSE("GPL");
 
 #ifdef MODULE
@@ -403,10 +396,6 @@ static void mixer_init(void)
 
 struct sound_queue dmasound_write_sq;
 static void sq_reset_output(void) ;
-#ifdef HAS_RECORD
-struct sound_queue dmasound_read_sq;
-static void sq_reset_input(void) ;
-#endif
 
 static int sq_allocate_buffers(struct sound_queue *sq, int num, int size)
 {
@@ -530,12 +519,6 @@ printk("dmasound_core: invalid frag count (user set %d)\n", sq->user_frags) ;
 	    sq->rear = -1;
 	    setup_func = dmasound.mach.write_sq_setup;
 	}
-#ifdef HAS_RECORD
-	else {
-	    sq->rear = 0;
-	    setup_func = dmasound.mach.read_sq_setup;
-	}
-#endif
 	if (setup_func)
 	    return setup_func();
 	return 0 ;
@@ -672,13 +655,6 @@ static unsigned int sq_poll(struct file *file, struct poll_table_struct *wait)
 	}
 	if (file->f_mode & FMODE_WRITE )
 		poll_wait(file, &write_sq.action_queue, wait);
-#ifdef HAS_RECORD
-	if (file->f_mode & FMODE_READ)
-		poll_wait(file, &read_sq.action_queue, wait);
-	if (file->f_mode & FMODE_READ)
-		if (read_sq.block_size - read_sq.rear_size > 0)
-			mask |= POLLIN | POLLRDNORM;
-#endif
 	if (file->f_mode & FMODE_WRITE)
 		if (write_sq.count < write_sq.max_active || write_sq.block_size - write_sq.rear_size > 0)
 			mask |= POLLOUT | POLLWRNORM;
@@ -686,101 +662,6 @@ static unsigned int sq_poll(struct file *file, struct poll_table_struct *wait)
 
 }
 
-#ifdef HAS_RECORD
-    /*
-     *  Here is how the values are used for reading.
-     *  The value 'active' simply indicates the DMA is running.  This is done
-     *  so the driver semantics are DMA starts when the first read is posted.
-     *  The value 'front' indicates the buffer we should next send to the user.
-     *  The value 'rear' indicates the buffer the DMA is currently filling.
-     *  When 'front' == 'rear' the buffer "ring" is empty (we always have an
-     *  empty available).  The 'rear_size' is used to track partial offsets
-     *  into the buffer we are currently returning to the user.
-
-     *  This level (> [1.5]) doesn't care what strategy the LL driver uses with
-     *  DMA on over-run.  It can leave it running (and keep active == 1) or it
-     *  can kill it and set active == 0 in which case this routine will spot
-     *  it and restart the DMA.
-     */
-
-static ssize_t sq_read(struct file *file, char __user *dst, size_t uLeft,
-		       loff_t *ppos)
-{
-
-	ssize_t	uRead, bLeft, bUsed, uUsed;
-
-	if (uLeft == 0)
-		return 0;
-
-	/* cater for the compatibility mode - record compiled in but no LL */
-	if (dmasound.mach.record == NULL)
-		return -EINVAL ;
-
-	/* see comment in sq_write()
-	*/
-
-	if( shared_resources_initialised == 0) {
-		dmasound.mach.init() ;
-		shared_resources_initialised = 1 ;
-	}
-
-	/* set up the sq if it is not already done. see comments in sq_write().
-	*/
-
-	if (read_sq.locked == 0) {
-		if ((uRead = sq_setup(&read_sq)) < 0)
-			return uRead ;
-	}
-
-	uRead = 0;
-
-	/* Move what the user requests, depending upon other options.
-	*/
-	while (uLeft > 0) {
-
-		/* we happened to get behind and the LL driver killed DMA
-		   then we should set it going again.  This also sets it
-		   going the first time through.
-		*/
-		if ( !read_sq.active )
-			dmasound.mach.record();
-
-		/* When front == rear, the DMA is not done yet.
-		*/
-		while (read_sq.front == read_sq.rear) {
-			if (read_sq.open_mode & O_NONBLOCK) {
-			       return uRead > 0 ? uRead : -EAGAIN;
-			}
-			SLEEP(read_sq.action_queue);
-			if (signal_pending(current))
-				return uRead > 0 ? uRead : -EINTR;
-		}
-
-		/* The amount we move is either what is left in the
-		 * current buffer or what the user wants.
-		 */
-		bLeft = read_sq.block_size - read_sq.rear_size;
-		bUsed = read_sq.rear_size;
-		uUsed = sound_copy_translate(dmasound.trans_read, dst, uLeft,
-					     read_sq.buffers[read_sq.front],
-					     &bUsed, bLeft);
-		if (uUsed <= 0)
-			return uUsed;
-		dst += uUsed;
-		uRead += uUsed;
-		uLeft -= uUsed;
-		read_sq.rear_size += bUsed;
-		if (read_sq.rear_size >= read_sq.block_size) {
-			read_sq.rear_size = 0;
-			read_sq.front++;
-			if (read_sq.front >= read_sq.max_active)
-				read_sq.front = 0;
-		}
-	}
-	return uRead;
-}
-#endif /* HAS_RECORD */
-
 static inline void sq_init_waitqueue(struct sound_queue *sq)
 {
 	init_waitqueue_head(&sq->action_queue);
@@ -854,23 +735,6 @@ static int sq_open2(struct sound_queue *sq, struct file *file, mode_t mode,
 #define write_sq_open(file)	\
 	sq_open2(&write_sq, file, FMODE_WRITE, numWriteBufs, writeBufSize )
 
-#ifdef HAS_RECORD
-#define read_sq_init_waitqueue()	sq_init_waitqueue(&read_sq)
-#if 0 /* blocking open() */
-#define read_sq_wake_up(file)		sq_wake_up(&read_sq, file, FMODE_READ)
-#endif
-#define read_sq_release_buffers()	sq_release_buffers(&read_sq)
-#define read_sq_open(file)	\
-	sq_open2(&read_sq, file, FMODE_READ, numReadBufs, readBufSize )
-#else
-#define read_sq_init_waitqueue()	do {} while (0)
-#if 0 /* blocking open() */
-#define read_sq_wake_up(file)		do {} while (0)
-#endif
-#define read_sq_release_buffers()	do {} while (0)
-#define sq_reset_input()		do {} while (0)
-#endif
-
 static int sq_open(struct inode *inode, struct file *file)
 {
 	int rc;
@@ -881,25 +745,11 @@ static int sq_open(struct inode *inode, struct file *file)
 	rc = write_sq_open(file); /* checks the f_mode */
 	if (rc)
 		goto out;
-#ifdef HAS_RECORD
-	if (dmasound.mach.record) {
-		rc = read_sq_open(file); /* checks the f_mode */
-		if (rc)
-			goto out;
-	} else { /* no record function installed; in compat mode */
-		if (file->f_mode & FMODE_READ) {
-			/* TODO: if O_RDWR, release any resources grabbed by write part */
-			rc = -ENXIO;
-			goto out;
-		}
-	}
-#else /* !HAS_RECORD */
 	if (file->f_mode & FMODE_READ) {
 		/* TODO: if O_RDWR, release any resources grabbed by write part */
 		rc = -ENXIO ; /* I think this is what is required by open(2) */
 		goto out;
 	}
-#endif /* HAS_RECORD */
 
 	if (dmasound.mach.sq_open)
 	    dmasound.mach.sq_open(file->f_mode);
@@ -956,43 +806,9 @@ static void sq_reset_output(void)
 	write_sq.user_frag_size = 0 ;
 }
 
-#ifdef HAS_RECORD
-
-static void sq_reset_input(void)
-{
-	if (dmasound.mach.record && read_sq.active) {
-		if (dmasound.mach.abort_read) { /* this routine must really be present */
-			read_sq.syncing = 1 ;
-			/* this can use the read_sq.sync_queue to sleep if
-			   necessary - it should not return until DMA
-			   is really stopped - because we might deallocate
-			   the buffers as the next action...
-			*/
-			dmasound.mach.abort_read() ;
-		} else {
-			printk(KERN_ERR
-			"dmasound_core: %s has no abort_read()!! all bets are off\n",
-				dmasound.mach.name) ;
-		}
-	}
-	read_sq.syncing =
-	read_sq.active =
-	read_sq.front =
-	read_sq.count =
-	read_sq.rear = 0 ;
-
-	/* OK - we can unlock the parameters and fragment settings */
-	read_sq.locked = 0 ;
-	read_sq.user_frags = 0 ;
-	read_sq.user_frag_size = 0 ;
-}
-
-#endif
-
 static void sq_reset(void)
 {
 	sq_reset_output() ;
-	sq_reset_input() ;
 	/* we could consider resetting the shared_resources_owner here... but I
 	   think it is probably still rather non-obvious to application writer
 	*/
@@ -1038,17 +854,6 @@ static int sq_release(struct inode *inode, struct file *file)
 
 	lock_kernel();
 
-#ifdef HAS_RECORD
-	/* probably best to do the read side first - so that time taken to do it
-	   overlaps with playing any remaining output samples.
-	*/
-	if (file->f_mode & FMODE_READ) {
-		sq_reset_input() ; /* make sure dma is stopped and all is quiet */
-		read_sq_release_buffers();
-		read_sq.busy = 0;
-	}
-#endif
-
 	if (file->f_mode & FMODE_WRITE) {
 		if (write_sq.busy)
 			rc = sq_fsync(file, file->f_path.dentry);
@@ -1105,11 +910,6 @@ static int shared_resources_are_mine(mode_t md)
 
 static int queues_are_quiescent(void)
 {
-#ifdef HAS_RECORD
-	if (dmasound.mach.record)
-		if (read_sq.locked)
-			return 0 ;
-#endif
 	if (write_sq.locked)
 		return 0 ;
 	return 1 ;
@@ -1185,13 +985,6 @@ static int sq_ioctl(struct inode *inode, struct file *file, u_int cmd,
 		   the read_sq ones.
 		*/
 		size = 0 ;
-#ifdef HAS_RECORD
-		if (dmasound.mach.record && (file->f_mode & FMODE_READ)) {
-			if ( !read_sq.locked )
-				sq_setup(&read_sq) ; /* set params */
-			size = read_sq.user_frag_size ;
-		}
-#endif
 		if (file->f_mode & FMODE_WRITE) {
 			if ( !write_sq.locked )
 				sq_setup(&write_sq) ;
@@ -1214,8 +1007,6 @@ static int sq_ioctl(struct inode *inode, struct file *file, u_int cmd,
 		   everything - read, however, is killed imediately.
 		*/
 		result = 0 ;
-		if ((file->f_mode & FMODE_READ) && dmasound.mach.record)
-			sq_reset_input() ;
 		if (file->f_mode & FMODE_WRITE) {
 			result = sq_fsync(file, file->f_path.dentry);
 			sq_reset_output() ;
@@ -1294,13 +1085,6 @@ static int sq_ioctl(struct inode *inode, struct file *file, u_int cmd,
 		result = 0 ;
 		nbufs = (data >> 16) & 0x7fff ; /* 0x7fff is 'use maximum' */
 		size = data & 0xffff;
-#ifdef HAS_RECORD
-		if ((file->f_mode & FMODE_READ) && dmasound.mach.record) {
-			result = set_queue_frags(&read_sq, nbufs, size) ;
-			if (result)
-				return result ;
-		}
-#endif
 		if (file->f_mode & FMODE_WRITE) {
 			result = set_queue_frags(&write_sq, nbufs, size) ;
 			if (result)
@@ -1348,20 +1132,6 @@ static const struct file_operations sq_fops =
 	.release	= sq_release,
 };
 
-#ifdef HAS_RECORD
-static const struct file_operations sq_fops_record =
-{
-	.owner		= THIS_MODULE,
-	.llseek		= no_llseek,
-	.write		= sq_write,
-	.poll		= sq_poll,
-	.ioctl		= sq_ioctl,
-	.open		= sq_open,
-	.release	= sq_release,
-	.read		= sq_read,
-};
-#endif
-
 static int sq_init(void)
 {
 	const struct file_operations *fops = &sq_fops;
@@ -1369,10 +1139,6 @@ static int sq_init(void)
 	int sq_unit;
 #endif
 
-#ifdef HAS_RECORD
-	if (dmasound.mach.record)
-		fops = &sq_fops_record;
-#endif
 	sq_unit = register_sound_dsp(fops, -1);
 	if (sq_unit < 0) {
 		printk(KERN_ERR "dmasound_core: couldn't register fops\n") ;
@@ -1380,7 +1146,6 @@ static int sq_init(void)
 	}
 
 	write_sq_init_waitqueue();
-	read_sq_init_waitqueue();
 
 	/* These parameters will be restored for every clean open()
 	 * in the case of multiple open()s (e.g. dsp0 & dsp1) they
@@ -1406,11 +1171,7 @@ static int sq_init(void)
    driver.
 */
 
-#ifdef HAS_RECORD
-#define STAT_BUFF_LEN 1024
-#else
 #define STAT_BUFF_LEN 768
-#endif
 
 /* this is how much space we will allow the low-level driver to use
    in the stat buffer.  Currently, 2 * (80 character line + <NL>).
@@ -1518,11 +1279,6 @@ static int state_open(struct inode *inode, struct file *file)
 	len += sprintf(buffer+len,"Allocated:%8s%6s\n","Buffers","Size") ;
 	len += sprintf(buffer+len,"%9s:%8d%6d\n",
 		"write", write_sq.numBufs, write_sq.bufSize) ;
-#ifdef HAS_RECORD
-	if (dmasound.mach.record)
-		len += sprintf(buffer+len,"%9s:%8d%6d\n",
-			"read", read_sq.numBufs, read_sq.bufSize) ;
-#endif
 	len += sprintf(buffer+len,
 		"Current  : MaxFrg FragSiz MaxAct Frnt Rear "
 		"Cnt RrSize A B S L  xruns\n") ;
@@ -1531,14 +1287,6 @@ static int state_open(struct inode *inode, struct file *file)
 		write_sq.max_active, write_sq.front, write_sq.rear,
 		write_sq.count, write_sq.rear_size, write_sq.active,
 		write_sq.busy, write_sq.syncing, write_sq.locked, write_sq.xruns) ;
-#ifdef HAS_RECORD
-	if (dmasound.mach.record)
-		len += sprintf(buffer+len,"%9s:%7d%8d%7d%5d%5d%4d%7d%2d%2d%2d%2d%7d\n",
-			"read", read_sq.max_count, read_sq.block_size,
-			read_sq.max_active, read_sq.front, read_sq.rear,
-			read_sq.count, read_sq.rear_size, read_sq.active,
-			read_sq.busy, read_sq.syncing, read_sq.locked, read_sq.xruns) ;
-#endif
 #ifdef DEBUG_DMASOUND
 printk("dmasound: stat buffer used %d bytes\n", len) ;
 #endif
@@ -1638,13 +1386,6 @@ int dmasound_init(void)
 		(dmasound.mach.version >> 8), (dmasound.mach.version & 0xff)) ;
 	printk(KERN_INFO "Write will use %4d fragments of %7d bytes as default\n",
 		numWriteBufs, writeBufSize) ;
-#ifdef HAS_RECORD
-	if (dmasound.mach.record)
-		printk(KERN_INFO
-			"Read  will use %4d fragments of %7d bytes as default\n",
-			numReadBufs, readBufSize) ;
-#endif
-
 	return 0;
 }
 
@@ -1659,7 +1400,6 @@ void dmasound_deinit(void)
 	}
 
 	write_sq_release_buffers();
-	read_sq_release_buffers();
 
 	if (mixer_unit >= 0)
 		unregister_sound_mixer(mixer_unit);
@@ -1684,36 +1424,12 @@ static int dmasound_setup(char *str)
 	 */
 
 	switch (ints[0]) {
-#ifdef HAS_RECORD
-        case 5:
-                if ((ints[5] < 0) || (ints[5] > MAX_CATCH_RADIUS))
-                        printk("dmasound_setup: invalid catch radius, using default = %d\n", catchRadius);
-                else
-                        catchRadius = ints[5];
-                /* fall through */
-        case 4:
-                if (ints[4] < MIN_BUFFERS)
-                        printk("dmasound_setup: invalid number of read buffers, using default = %d\n",
-                                 numReadBufs);
-                else
-                        numReadBufs = ints[4];
-                /* fall through */
-        case 3:
-		if ((size = ints[3]) < 256)  /* check for small buffer specs */
-			size <<= 10 ;
-                if (size < MIN_BUFSIZE || size > MAX_BUFSIZE)
-                        printk("dmasound_setup: invalid read buffer size, using default = %d\n", readBufSize);
-                else
-                        readBufSize = size;
-                /* fall through */
-#else
 	case 3:
 		if ((ints[3] < 0) || (ints[3] > MAX_CATCH_RADIUS))
 			printk("dmasound_setup: invalid catch radius, using default = %d\n", catchRadius);
 		else
 			catchRadius = ints[3];
 		/* fall through */
-#endif
 	case 2:
 		if (ints[1] < MIN_BUFFERS)
 			printk("dmasound_setup: invalid number of buffers, using default = %d\n", numWriteBufs);
@@ -1830,9 +1546,6 @@ EXPORT_SYMBOL(dmasound_init);
 EXPORT_SYMBOL(dmasound_deinit);
 #endif
 EXPORT_SYMBOL(dmasound_write_sq);
-#ifdef HAS_RECORD
-EXPORT_SYMBOL(dmasound_read_sq);
-#endif
 EXPORT_SYMBOL(dmasound_catchRadius);
 #ifdef HAS_8BIT_TABLES
 EXPORT_SYMBOL(dmasound_ulaw2dma8);
diff --git a/sound/oss/dmasound/tas3001c.c b/sound/oss/dmasound/tas3001c.c
deleted file mode 100644
index 4b7dbdd..0000000
--- a/sound/oss/dmasound/tas3001c.c
+++ /dev/null
@@ -1,849 +0,0 @@
-/*
- * Driver for the i2c/i2s based TA3004 sound chip used
- * on some Apple hardware. Also known as "snapper".
- *
- * Tobias Sargeant <tobias.sargeant@bigpond.com>
- * Based upon, tas3001c.c by Christopher C. Chimelis <chris@debian.org>:
- *
- *   TODO:
- *   -----
- *   * Enable control over input line 2 (is this connected?)
- *   * Implement sleep support (at least mute everything and
- *   * set gains to minimum during sleep)
- *   * Look into some of Darwin's tweaks regarding the mute
- *   * lines (delays & different behaviour on some HW)
- *
- */
-
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/proc_fs.h>
-#include <linux/ioport.h>
-#include <linux/sysctl.h>
-#include <linux/types.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/soundcard.h>
-#include <linux/workqueue.h>
-#include <asm/uaccess.h>
-#include <asm/errno.h>
-#include <asm/io.h>
-#include <asm/prom.h>
-
-#include "dmasound.h"
-#include "tas_common.h"
-#include "tas3001c.h"
-
-#include "tas_ioctl.h"
-
-#define TAS3001C_BIQUAD_FILTER_COUNT  6
-#define TAS3001C_BIQUAD_CHANNEL_COUNT 2
-
-#define VOL_DEFAULT	(100 * 4 / 5)
-#define INPUT_DEFAULT	(100 * 4 / 5)
-#define BASS_DEFAULT	(100 / 2)
-#define TREBLE_DEFAULT	(100 / 2)
-
-struct tas3001c_data_t {
-	struct tas_data_t super;
-	int device_id;
-	int output_id;
-	int speaker_id;
-	struct tas_drce_t drce_state;
-	struct work_struct change;
-};
-
-
-static const union tas_biquad_t
-tas3001c_eq_unity={
-	.buf = { 0x100000, 0x000000, 0x000000, 0x000000, 0x000000 }
-};
-
-
-static inline unsigned char db_to_regval(short db) {
-	int r=0;
-
-	r=(db+0x59a0) / 0x60;
-
-	if (r < 0x91) return 0x91;
-	if (r > 0xef) return 0xef;
-	return r;
-}
-
-static inline short quantize_db(short db) {
-	return db_to_regval(db) * 0x60 - 0x59a0;
-}
-
-
-static inline int
-register_width(enum tas3001c_reg_t r)
-{
-	switch(r) {
-	case TAS3001C_REG_MCR:
- 	case TAS3001C_REG_TREBLE:
-	case TAS3001C_REG_BASS:
-		return 1;
-
-	case TAS3001C_REG_DRC:
-		return 2;
-
-	case TAS3001C_REG_MIXER1:
-	case TAS3001C_REG_MIXER2:
-		return 3;
-
-	case TAS3001C_REG_VOLUME:
-		return 6;
-
-	case TAS3001C_REG_LEFT_BIQUAD0:
-	case TAS3001C_REG_LEFT_BIQUAD1:
-	case TAS3001C_REG_LEFT_BIQUAD2:
-	case TAS3001C_REG_LEFT_BIQUAD3:
-	case TAS3001C_REG_LEFT_BIQUAD4:
-	case TAS3001C_REG_LEFT_BIQUAD5:
-	case TAS3001C_REG_LEFT_BIQUAD6:
-
-	case TAS3001C_REG_RIGHT_BIQUAD0:
-	case TAS3001C_REG_RIGHT_BIQUAD1:
-	case TAS3001C_REG_RIGHT_BIQUAD2:
-	case TAS3001C_REG_RIGHT_BIQUAD3:
-	case TAS3001C_REG_RIGHT_BIQUAD4:
-	case TAS3001C_REG_RIGHT_BIQUAD5:
-	case TAS3001C_REG_RIGHT_BIQUAD6:
-		return 15;
-
-	default:
-		return 0;
-	}
-}
-
-static int
-tas3001c_write_register(	struct tas3001c_data_t *self,
-				enum tas3001c_reg_t reg_num,
-				char *data,
-				uint write_mode)
-{
-	if (reg_num==TAS3001C_REG_MCR ||
-	    reg_num==TAS3001C_REG_BASS ||
-	    reg_num==TAS3001C_REG_TREBLE) {
-		return tas_write_byte_register(&self->super,
-					       (uint)reg_num,
-					       *data,
-					       write_mode);
-	} else {
-		return tas_write_register(&self->super,
-					  (uint)reg_num,
-					  register_width(reg_num),
-					  data,
-					  write_mode);
-	}
-}
-
-static int
-tas3001c_sync_register(	struct tas3001c_data_t *self,
-			enum tas3001c_reg_t reg_num)
-{
-	if (reg_num==TAS3001C_REG_MCR ||
-	    reg_num==TAS3001C_REG_BASS ||
-	    reg_num==TAS3001C_REG_TREBLE) {
-		return tas_sync_byte_register(&self->super,
-					      (uint)reg_num,
-					      register_width(reg_num));
-	} else {
-		return tas_sync_register(&self->super,
-					 (uint)reg_num,
-					 register_width(reg_num));
-	}
-}
-
-static int
-tas3001c_read_register(	struct tas3001c_data_t *self,
-			enum tas3001c_reg_t reg_num,
-			char *data,
-			uint write_mode)
-{
-	return tas_read_register(&self->super,
-				 (uint)reg_num,
-				 register_width(reg_num),
-				 data);
-}
-
-static inline int
-tas3001c_fast_load(struct tas3001c_data_t *self, int fast)
-{
-	if (fast)
-		self->super.shadow[TAS3001C_REG_MCR][0] |= 0x80;
-	else
-		self->super.shadow[TAS3001C_REG_MCR][0] &= 0x7f;
-	return tas3001c_sync_register(self,TAS3001C_REG_MCR);
-}
-
-static uint
-tas3001c_supported_mixers(struct tas3001c_data_t *self)
-{
-	return SOUND_MASK_VOLUME |
-		SOUND_MASK_PCM |
-		SOUND_MASK_ALTPCM |
-		SOUND_MASK_TREBLE |
-		SOUND_MASK_BASS;
-}
-
-static int
-tas3001c_mixer_is_stereo(struct tas3001c_data_t *self,int mixer)
-{
-	switch(mixer) {
-	case SOUND_MIXER_VOLUME:
-		return 1;
-	default:
-		return 0;
-	}
-}
-
-static uint
-tas3001c_stereo_mixers(struct tas3001c_data_t *self)
-{
-	uint r=tas3001c_supported_mixers(self);
-	uint i;
-	
-	for (i=1; i<SOUND_MIXER_NRDEVICES; i++)
-		if (r&(1<<i) && !tas3001c_mixer_is_stereo(self,i))
-			r &= ~(1<<i);
-	return r;
-}
-
-static int
-tas3001c_get_mixer_level(struct tas3001c_data_t *self,int mixer,uint *level)
-{
-	if (!self)
-		return -1;
-		
-	*level=self->super.mixer[mixer];
-	
-	return 0;
-}
-
-static int
-tas3001c_set_mixer_level(struct tas3001c_data_t *self,int mixer,uint level)
-{
-	int rc;
-	tas_shadow_t *shadow;
-
-	uint temp;
-	uint offset=0;
-
-	if (!self)
-		return -1;
-		
-	shadow=self->super.shadow;
-
-	if (!tas3001c_mixer_is_stereo(self,mixer))
-		level = tas_mono_to_stereo(level);
-
-	switch(mixer) {
-	case SOUND_MIXER_VOLUME:
-		temp = tas3001c_gain.master[level&0xff];
-		shadow[TAS3001C_REG_VOLUME][0] = (temp >> 16) & 0xff;
-		shadow[TAS3001C_REG_VOLUME][1] = (temp >> 8)  & 0xff;
-		shadow[TAS3001C_REG_VOLUME][2] = (temp >> 0)  & 0xff;
-		temp = tas3001c_gain.master[(level>>8)&0xff];
-		shadow[TAS3001C_REG_VOLUME][3] = (temp >> 16) & 0xff;
-		shadow[TAS3001C_REG_VOLUME][4] = (temp >> 8)  & 0xff;
-		shadow[TAS3001C_REG_VOLUME][5] = (temp >> 0)  & 0xff;
-		rc = tas3001c_sync_register(self,TAS3001C_REG_VOLUME);
-		break;
-	case SOUND_MIXER_ALTPCM:
-		/* tas3001c_fast_load(self, 1); */
-		level = tas_mono_to_stereo(level);
-		temp = tas3001c_gain.mixer[level&0xff];
-		shadow[TAS3001C_REG_MIXER2][offset+0] = (temp >> 16) & 0xff;
-		shadow[TAS3001C_REG_MIXER2][offset+1] = (temp >> 8)  & 0xff;
-		shadow[TAS3001C_REG_MIXER2][offset+2] = (temp >> 0)  & 0xff;
-		rc = tas3001c_sync_register(self,TAS3001C_REG_MIXER2);
-		/* tas3001c_fast_load(self, 0); */
-		break;
-	case SOUND_MIXER_PCM:
-		/* tas3001c_fast_load(self, 1); */
-		level = tas_mono_to_stereo(level);
-		temp = tas3001c_gain.mixer[level&0xff];
-		shadow[TAS3001C_REG_MIXER1][offset+0] = (temp >> 16) & 0xff;
-		shadow[TAS3001C_REG_MIXER1][offset+1] = (temp >> 8)  & 0xff;
-		shadow[TAS3001C_REG_MIXER1][offset+2] = (temp >> 0)  & 0xff;
-		rc = tas3001c_sync_register(self,TAS3001C_REG_MIXER1);
-		/* tas3001c_fast_load(self, 0); */
-		break;
-	case SOUND_MIXER_TREBLE:
-		temp = tas3001c_gain.treble[level&0xff];
-		shadow[TAS3001C_REG_TREBLE][0]=temp&0xff;
-		rc = tas3001c_sync_register(self,TAS3001C_REG_TREBLE);
-		break;
-	case SOUND_MIXER_BASS:
-		temp = tas3001c_gain.bass[level&0xff];
-		shadow[TAS3001C_REG_BASS][0]=temp&0xff;
-		rc = tas3001c_sync_register(self,TAS3001C_REG_BASS);
-		break;
-	default:
-		rc = -1;
-		break;
-	}
-	if (rc < 0)
-		return rc;
-	self->super.mixer[mixer]=level;
-	return 0;
-}
-
-static int
-tas3001c_leave_sleep(struct tas3001c_data_t *self)
-{
-	unsigned char mcr = (1<<6)+(2<<4)+(2<<2);
-
-	if (!self)
-		return -1;
-
-	/* Make sure something answers on the i2c bus */
-	if (tas3001c_write_register(self, TAS3001C_REG_MCR, &mcr,
-	    WRITE_NORMAL|FORCE_WRITE) < 0)
-	    	return -1;
-
-	tas3001c_fast_load(self, 1);
-
-	(void)tas3001c_sync_register(self,TAS3001C_REG_RIGHT_BIQUAD0);
-	(void)tas3001c_sync_register(self,TAS3001C_REG_RIGHT_BIQUAD1);
-	(void)tas3001c_sync_register(self,TAS3001C_REG_RIGHT_BIQUAD2);
-	(void)tas3001c_sync_register(self,TAS3001C_REG_RIGHT_BIQUAD3);
-	(void)tas3001c_sync_register(self,TAS3001C_REG_RIGHT_BIQUAD4);
-	(void)tas3001c_sync_register(self,TAS3001C_REG_RIGHT_BIQUAD5);
-
-	(void)tas3001c_sync_register(self,TAS3001C_REG_LEFT_BIQUAD0);
-	(void)tas3001c_sync_register(self,TAS3001C_REG_LEFT_BIQUAD1);
-	(void)tas3001c_sync_register(self,TAS3001C_REG_LEFT_BIQUAD2);
-	(void)tas3001c_sync_register(self,TAS3001C_REG_LEFT_BIQUAD3);
-	(void)tas3001c_sync_register(self,TAS3001C_REG_LEFT_BIQUAD4);
-	(void)tas3001c_sync_register(self,TAS3001C_REG_LEFT_BIQUAD5);
-
-	tas3001c_fast_load(self, 0);
-
-	(void)tas3001c_sync_register(self,TAS3001C_REG_BASS);
-	(void)tas3001c_sync_register(self,TAS3001C_REG_TREBLE);
-	(void)tas3001c_sync_register(self,TAS3001C_REG_MIXER1);
-	(void)tas3001c_sync_register(self,TAS3001C_REG_MIXER2);
-	(void)tas3001c_sync_register(self,TAS3001C_REG_VOLUME);
-
-	return 0;
-}
-
-static int
-tas3001c_enter_sleep(struct tas3001c_data_t *self)
-{
-	/* Stub for now, but I have the details on low-power mode */
-	if (!self)
-		return -1; 
-	return 0;
-}
-
-static int
-tas3001c_sync_biquad(	struct tas3001c_data_t *self,
-			u_int channel,
-			u_int filter)
-{
-	enum tas3001c_reg_t reg;
-
-	if (channel >= TAS3001C_BIQUAD_CHANNEL_COUNT ||
-	    filter  >= TAS3001C_BIQUAD_FILTER_COUNT) return -EINVAL;
-
-	reg=( channel ? TAS3001C_REG_RIGHT_BIQUAD0 : TAS3001C_REG_LEFT_BIQUAD0 ) + filter;
-
-	return tas3001c_sync_register(self,reg);
-}
-
-static int
-tas3001c_write_biquad_shadow(	struct tas3001c_data_t *self,
-				u_int channel,
-				u_int filter,
-				const union tas_biquad_t *biquad)
-{
-	tas_shadow_t *shadow=self->super.shadow;
-	enum tas3001c_reg_t reg;
-
-	if (channel >= TAS3001C_BIQUAD_CHANNEL_COUNT ||
-	    filter  >= TAS3001C_BIQUAD_FILTER_COUNT) return -EINVAL;
-
-	reg=( channel ? TAS3001C_REG_RIGHT_BIQUAD0 : TAS3001C_REG_LEFT_BIQUAD0 ) + filter;
-
-	SET_4_20(shadow[reg], 0,biquad->coeff.b0);
-	SET_4_20(shadow[reg], 3,biquad->coeff.b1);
-	SET_4_20(shadow[reg], 6,biquad->coeff.b2);
-	SET_4_20(shadow[reg], 9,biquad->coeff.a1);
-	SET_4_20(shadow[reg],12,biquad->coeff.a2);
-
-	return 0;
-}
-
-static int
-tas3001c_write_biquad(	struct tas3001c_data_t *self,
-			u_int channel,
-			u_int filter,
-			const union tas_biquad_t *biquad)
-{
-	int rc;
-
-	rc=tas3001c_write_biquad_shadow(self, channel, filter, biquad);
-	if (rc < 0) return rc;
-
-	return tas3001c_sync_biquad(self, channel, filter);
-}
-
-static int
-tas3001c_write_biquad_list(	struct tas3001c_data_t *self,
-				u_int filter_count,
-				u_int flags,
-				struct tas_biquad_ctrl_t *biquads)
-{
-	int i;
-	int rc;
-
-	if (flags & TAS_BIQUAD_FAST_LOAD) tas3001c_fast_load(self,1);
-
-	for (i=0; i<filter_count; i++) {
-		rc=tas3001c_write_biquad(self,
-					 biquads[i].channel,
-					 biquads[i].filter,
-					 &biquads[i].data);
-		if (rc < 0) break;
-	}
-
-	if (flags & TAS_BIQUAD_FAST_LOAD) {
-		tas3001c_fast_load(self,0);
-
-		(void)tas3001c_sync_register(self,TAS3001C_REG_BASS);
-		(void)tas3001c_sync_register(self,TAS3001C_REG_TREBLE);
-		(void)tas3001c_sync_register(self,TAS3001C_REG_MIXER1);
-		(void)tas3001c_sync_register(self,TAS3001C_REG_MIXER2);
-		(void)tas3001c_sync_register(self,TAS3001C_REG_VOLUME);
-	}
-
-	return rc;
-}
-
-static int
-tas3001c_read_biquad(	struct tas3001c_data_t *self,
-			u_int channel,
-			u_int filter,
-			union tas_biquad_t *biquad)
-{
-	tas_shadow_t *shadow=self->super.shadow;
-	enum tas3001c_reg_t reg;
-
-	if (channel >= TAS3001C_BIQUAD_CHANNEL_COUNT ||
-	    filter  >= TAS3001C_BIQUAD_FILTER_COUNT) return -EINVAL;
-
-	reg=( channel ? TAS3001C_REG_RIGHT_BIQUAD0 : TAS3001C_REG_LEFT_BIQUAD0 ) + filter;
-
-	biquad->coeff.b0=GET_4_20(shadow[reg], 0);
-	biquad->coeff.b1=GET_4_20(shadow[reg], 3);
-	biquad->coeff.b2=GET_4_20(shadow[reg], 6);
-	biquad->coeff.a1=GET_4_20(shadow[reg], 9);
-	biquad->coeff.a2=GET_4_20(shadow[reg],12);
-	
-	return 0;	
-}
-
-static int
-tas3001c_eq_rw(	struct tas3001c_data_t *self,
-		u_int cmd,
-		u_long arg)
-{
-	int rc;
-	struct tas_biquad_ctrl_t biquad;
-	void __user *argp = (void __user *)arg;
-
-	if (copy_from_user(&biquad, argp, sizeof(struct tas_biquad_ctrl_t))) {
-		return -EFAULT;
-	}
-
-	if (cmd & SIOC_IN) {
-		rc=tas3001c_write_biquad(self, biquad.channel, biquad.filter, &biquad.data);
-		if (rc != 0) return rc;
-	}
-
-	if (cmd & SIOC_OUT) {
-		rc=tas3001c_read_biquad(self, biquad.channel, biquad.filter, &biquad.data);
-		if (rc != 0) return rc;
-
-		if (copy_to_user(argp, &biquad, sizeof(struct tas_biquad_ctrl_t))) {
-			return -EFAULT;
-		}
-
-	}
-	return 0;
-}
-
-static int
-tas3001c_eq_list_rw(	struct tas3001c_data_t *self,
-			u_int cmd,
-			u_long arg)
-{
-	int rc;
-	int filter_count;
-	int flags;
-	int i,j;
-	char sync_required[2][6];
-	struct tas_biquad_ctrl_t biquad;
-	struct tas_biquad_ctrl_list_t __user *argp = (void __user *)arg;
-
-	memset(sync_required,0,sizeof(sync_required));
-
-	if (copy_from_user(&filter_count, &argp->filter_count, sizeof(int)))
-		return -EFAULT;
-
-	if (copy_from_user(&flags, &argp->flags, sizeof(int)))
-		return -EFAULT;
-
-	if (cmd & SIOC_IN) {
-	}
-
-	for (i=0; i < filter_count; i++) {
-		if (copy_from_user(&biquad, &argp->biquads[i],
-				   sizeof(struct tas_biquad_ctrl_t))) {
-			return -EFAULT;
-		}
-
-		if (cmd & SIOC_IN) {
-			sync_required[biquad.channel][biquad.filter]=1;
-			rc=tas3001c_write_biquad_shadow(self, biquad.channel, biquad.filter, &biquad.data);
-			if (rc != 0) return rc;
-		}
-
-		if (cmd & SIOC_OUT) {
-			rc=tas3001c_read_biquad(self, biquad.channel, biquad.filter, &biquad.data);
-			if (rc != 0) return rc;
-
-			if (copy_to_user(&argp->biquads[i], &biquad,
-					 sizeof(struct tas_biquad_ctrl_t))) {
-				return -EFAULT;
-			}
-		}
-	}
-
-	if (cmd & SIOC_IN) {
-		if (flags & TAS_BIQUAD_FAST_LOAD) tas3001c_fast_load(self,1);
-		for (i=0; i<2; i++) {
-			for (j=0; j<6; j++) {
-				if (sync_required[i][j]) {
-					rc=tas3001c_sync_biquad(self, i, j);
-					if (rc < 0) return rc;
-				}
-			}
-		}
-		if (flags & TAS_BIQUAD_FAST_LOAD) {
-			tas3001c_fast_load(self,0);
-			/* now we need to set up the mixers again,
-			   because leaving fast mode resets them. */
-			(void)tas3001c_sync_register(self,TAS3001C_REG_BASS);
-			(void)tas3001c_sync_register(self,TAS3001C_REG_TREBLE);
-			(void)tas3001c_sync_register(self,TAS3001C_REG_MIXER1);
-			(void)tas3001c_sync_register(self,TAS3001C_REG_MIXER2);
-			(void)tas3001c_sync_register(self,TAS3001C_REG_VOLUME);
-		}
-	}
-
-	return 0;
-}
-
-static int
-tas3001c_update_drce(	struct tas3001c_data_t *self,
-			int flags,
-			struct tas_drce_t *drce)
-{
-	tas_shadow_t *shadow;
-	shadow=self->super.shadow;
-
-	shadow[TAS3001C_REG_DRC][1] = 0xc1;
-
-	if (flags & TAS_DRCE_THRESHOLD) {
-		self->drce_state.threshold=quantize_db(drce->threshold);
-		shadow[TAS3001C_REG_DRC][2] = db_to_regval(self->drce_state.threshold);
-	}
-
-	if (flags & TAS_DRCE_ENABLE) {
-		self->drce_state.enable = drce->enable;
-	}
-
-	if (!self->drce_state.enable) {
-		shadow[TAS3001C_REG_DRC][0] = 0xf0;
-	}
-
-#ifdef DEBUG_DRCE
-	printk("DRCE IOCTL: set [ ENABLE:%x THRESH:%x\n",
-	       self->drce_state.enable,
-	       self->drce_state.threshold);
-
-	printk("DRCE IOCTL: reg [ %02x %02x ]\n",
-	       (unsigned char)shadow[TAS3001C_REG_DRC][0],
-	       (unsigned char)shadow[TAS3001C_REG_DRC][1]);
-#endif
-
-	return tas3001c_sync_register(self, TAS3001C_REG_DRC);
-}
-
-static int
-tas3001c_drce_rw(	struct tas3001c_data_t *self,
-			u_int cmd,
-			u_long arg)
-{
-	int rc;
-	struct tas_drce_ctrl_t drce_ctrl;
-	void __user *argp = (void __user *)arg;
-
-	if (copy_from_user(&drce_ctrl, argp, sizeof(struct tas_drce_ctrl_t)))
-		return -EFAULT;
-
-#ifdef DEBUG_DRCE
-	printk("DRCE IOCTL: input [ FLAGS:%x ENABLE:%x THRESH:%x\n",
-	       drce_ctrl.flags,
-	       drce_ctrl.data.enable,
-	       drce_ctrl.data.threshold);
-#endif
-
-	if (cmd & SIOC_IN) {
-		rc = tas3001c_update_drce(self, drce_ctrl.flags, &drce_ctrl.data);
-		if (rc < 0)
-			return rc;
-	}
-
-	if (cmd & SIOC_OUT) {
-		if (drce_ctrl.flags & TAS_DRCE_ENABLE)
-			drce_ctrl.data.enable = self->drce_state.enable;
-
-		if (drce_ctrl.flags & TAS_DRCE_THRESHOLD)
-			drce_ctrl.data.threshold = self->drce_state.threshold;
-
-		if (copy_to_user(argp, &drce_ctrl,
-				 sizeof(struct tas_drce_ctrl_t))) {
-			return -EFAULT;
-		}
-	}
-
-	return 0;
-}
-
-static void
-tas3001c_update_device_parameters(struct tas3001c_data_t *self)
-{
-	int i,j;
-
-	if (!self) return;
-
-	if (self->output_id == TAS_OUTPUT_HEADPHONES) {
-		tas3001c_fast_load(self, 1);
-
-		for (i=0; i<TAS3001C_BIQUAD_CHANNEL_COUNT; i++) {
-			for (j=0; j<TAS3001C_BIQUAD_FILTER_COUNT; j++) {
-				tas3001c_write_biquad(self, i, j, &tas3001c_eq_unity);
-			}
-		}
-
-		tas3001c_fast_load(self, 0);
-
-		(void)tas3001c_sync_register(self,TAS3001C_REG_BASS);
-		(void)tas3001c_sync_register(self,TAS3001C_REG_TREBLE);
-		(void)tas3001c_sync_register(self,TAS3001C_REG_MIXER1);
-		(void)tas3001c_sync_register(self,TAS3001C_REG_MIXER2);
-		(void)tas3001c_sync_register(self,TAS3001C_REG_VOLUME);
-
-		return;
-	}
-
-	for (i=0; tas3001c_eq_prefs[i]; i++) {
-		struct tas_eq_pref_t *eq = tas3001c_eq_prefs[i];
-
-		if (eq->device_id == self->device_id &&
-		    (eq->output_id == 0 || eq->output_id == self->output_id) &&
-		    (eq->speaker_id == 0 || eq->speaker_id == self->speaker_id)) {
-
-			tas3001c_update_drce(self, TAS_DRCE_ALL, eq->drce);
-			tas3001c_write_biquad_list(self, eq->filter_count, TAS_BIQUAD_FAST_LOAD, eq->biquads);
-
-			break;
-		}
-	}
-}
-
-static void
-tas3001c_device_change_handler(struct work_struct *work)
-{
-	struct tas3001c_data_t *self;
-	self = container_of(work, struct tas3001c_data_t, change);
-	tas3001c_update_device_parameters(self);
-}
-
-static int
-tas3001c_output_device_change(	struct tas3001c_data_t *self,
-				int device_id,
-				int output_id,
-				int speaker_id)
-{
-	self->device_id=device_id;
-	self->output_id=output_id;
-	self->speaker_id=speaker_id;
-
-	schedule_work(&self->change);
-	return 0;
-}
-
-static int
-tas3001c_device_ioctl(	struct tas3001c_data_t *self,
-			u_int cmd,
-			u_long arg)
-{
-	uint __user *argp = (void __user *)arg;
-	switch (cmd) {
-	case TAS_READ_EQ:
-	case TAS_WRITE_EQ:
-		return tas3001c_eq_rw(self, cmd, arg);
-
-	case TAS_READ_EQ_LIST:
-	case TAS_WRITE_EQ_LIST:
-		return tas3001c_eq_list_rw(self, cmd, arg);
-
-	case TAS_READ_EQ_FILTER_COUNT:
-		put_user(TAS3001C_BIQUAD_FILTER_COUNT, argp);
-		return 0;
-
-	case TAS_READ_EQ_CHANNEL_COUNT:
-		put_user(TAS3001C_BIQUAD_CHANNEL_COUNT, argp);
-		return 0;
-
-	case TAS_READ_DRCE:
-	case TAS_WRITE_DRCE:
-		return tas3001c_drce_rw(self, cmd, arg);
-
-	case TAS_READ_DRCE_CAPS:
-		put_user(TAS_DRCE_ENABLE | TAS_DRCE_THRESHOLD, argp);
-		return 0;
-
-	case TAS_READ_DRCE_MIN:
-	case TAS_READ_DRCE_MAX: {
-		struct tas_drce_ctrl_t drce_ctrl;
-
-		if (copy_from_user(&drce_ctrl, argp,
-				   sizeof(struct tas_drce_ctrl_t))) {
-			return -EFAULT;
-		}
-
-		if (drce_ctrl.flags & TAS_DRCE_THRESHOLD) {
-			if (cmd == TAS_READ_DRCE_MIN) {
-				drce_ctrl.data.threshold=-36<<8;
-			} else {
-				drce_ctrl.data.threshold=-6<<8;
-			}
-		}
-
-		if (copy_to_user(argp, &drce_ctrl,
-				 sizeof(struct tas_drce_ctrl_t))) {
-			return -EFAULT;
-		}
-	}
-	}
-
-	return -EINVAL;
-}
-
-static int
-tas3001c_init_mixer(struct tas3001c_data_t *self)
-{
-	unsigned char mcr = (1<<6)+(2<<4)+(2<<2);
-
-	/* Make sure something answers on the i2c bus */
-	if (tas3001c_write_register(self, TAS3001C_REG_MCR, &mcr,
-	    WRITE_NORMAL|FORCE_WRITE) < 0)
-		return -1;
-
-	tas3001c_fast_load(self, 1);
-
-	(void)tas3001c_sync_register(self,TAS3001C_REG_RIGHT_BIQUAD0);
-	(void)tas3001c_sync_register(self,TAS3001C_REG_RIGHT_BIQUAD1);
-	(void)tas3001c_sync_register(self,TAS3001C_REG_RIGHT_BIQUAD2);
-	(void)tas3001c_sync_register(self,TAS3001C_REG_RIGHT_BIQUAD3);
-	(void)tas3001c_sync_register(self,TAS3001C_REG_RIGHT_BIQUAD4);
-	(void)tas3001c_sync_register(self,TAS3001C_REG_RIGHT_BIQUAD5);
-	(void)tas3001c_sync_register(self,TAS3001C_REG_RIGHT_BIQUAD6);
-
-	(void)tas3001c_sync_register(self,TAS3001C_REG_LEFT_BIQUAD0);
-	(void)tas3001c_sync_register(self,TAS3001C_REG_LEFT_BIQUAD1);
-	(void)tas3001c_sync_register(self,TAS3001C_REG_LEFT_BIQUAD2);
-	(void)tas3001c_sync_register(self,TAS3001C_REG_LEFT_BIQUAD3);
-	(void)tas3001c_sync_register(self,TAS3001C_REG_LEFT_BIQUAD4);
-	(void)tas3001c_sync_register(self,TAS3001C_REG_LEFT_BIQUAD5);
-	(void)tas3001c_sync_register(self,TAS3001C_REG_LEFT_BIQUAD6);
-
-	tas3001c_fast_load(self, 0);
-
-	tas3001c_set_mixer_level(self, SOUND_MIXER_VOLUME, VOL_DEFAULT<<8 | VOL_DEFAULT);
-	tas3001c_set_mixer_level(self, SOUND_MIXER_PCM, INPUT_DEFAULT<<8 | INPUT_DEFAULT);
-	tas3001c_set_mixer_level(self, SOUND_MIXER_ALTPCM, 0);
-
-	tas3001c_set_mixer_level(self, SOUND_MIXER_BASS, BASS_DEFAULT);
-	tas3001c_set_mixer_level(self, SOUND_MIXER_TREBLE, TREBLE_DEFAULT);
-
-	return 0;
-}
-
-static int
-tas3001c_uninit_mixer(struct tas3001c_data_t *self)
-{
-	tas3001c_set_mixer_level(self, SOUND_MIXER_VOLUME, 0);
-	tas3001c_set_mixer_level(self, SOUND_MIXER_PCM,    0);
-	tas3001c_set_mixer_level(self, SOUND_MIXER_ALTPCM, 0);
-
-	tas3001c_set_mixer_level(self, SOUND_MIXER_BASS,   0);
-	tas3001c_set_mixer_level(self, SOUND_MIXER_TREBLE, 0);
-
-	return 0;
-}
-
-static int
-tas3001c_init(struct i2c_client *client)
-{
-	struct tas3001c_data_t *self;
-	size_t sz = sizeof(*self) + (TAS3001C_REG_MAX*sizeof(tas_shadow_t));
-	int i, j;
-
-	self = kzalloc(sz, GFP_KERNEL);
-	if (!self)
-		return -ENOMEM;
-
-	self->super.client = client;
-	self->super.shadow = (tas_shadow_t *)(self+1);
-	self->output_id = TAS_OUTPUT_HEADPHONES;
-
-	dev_set_drvdata(&client->dev, self);
-
-	for (i = 0; i < TAS3001C_BIQUAD_CHANNEL_COUNT; i++)
-		for (j = 0; j < TAS3001C_BIQUAD_FILTER_COUNT; j++)
-			tas3001c_write_biquad_shadow(self, i, j,
-				&tas3001c_eq_unity);
-
-	INIT_WORK(&self->change, tas3001c_device_change_handler);
-	return 0;
-}
-
-static void
-tas3001c_uninit(struct tas3001c_data_t *self)
-{
-	tas3001c_uninit_mixer(self);
-	kfree(self);
-}
-
-struct tas_driver_hooks_t tas3001c_hooks = {
-	.init			= (tas_hook_init_t)tas3001c_init,
-	.post_init		= (tas_hook_post_init_t)tas3001c_init_mixer,
-	.uninit			= (tas_hook_uninit_t)tas3001c_uninit,
-	.get_mixer_level	= (tas_hook_get_mixer_level_t)tas3001c_get_mixer_level,
-	.set_mixer_level	= (tas_hook_set_mixer_level_t)tas3001c_set_mixer_level,
-	.enter_sleep		= (tas_hook_enter_sleep_t)tas3001c_enter_sleep,
-	.leave_sleep		= (tas_hook_leave_sleep_t)tas3001c_leave_sleep,
-	.supported_mixers	= (tas_hook_supported_mixers_t)tas3001c_supported_mixers,
-	.mixer_is_stereo	= (tas_hook_mixer_is_stereo_t)tas3001c_mixer_is_stereo,
-	.stereo_mixers		= (tas_hook_stereo_mixers_t)tas3001c_stereo_mixers,
-	.output_device_change	= (tas_hook_output_device_change_t)tas3001c_output_device_change,
-	.device_ioctl		= (tas_hook_device_ioctl_t)tas3001c_device_ioctl
-};
diff --git a/sound/oss/dmasound/tas3001c.h b/sound/oss/dmasound/tas3001c.h
deleted file mode 100644
index 3660da3..0000000
--- a/sound/oss/dmasound/tas3001c.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * Header file for the i2c/i2s based TA3001c sound chip used
- * on some Apple hardware. Also known as "tumbler".
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License.  See the file COPYING in the main directory of this archive
- *  for more details.
- *
- * Written by Christopher C. Chimelis <chris@debian.org>
- */
-
-#ifndef _TAS3001C_H_
-#define _TAS3001C_H_
-
-#include <linux/types.h>
-
-#include "tas_common.h"
-#include "tas_eq_prefs.h"
-
-/*
- * Macros that correspond to the registers that we write to
- * when setting the various values.
- */
-
-#define TAS3001C_VERSION	"0.3"
-#define TAS3001C_DATE	        "20011214"
-
-#define I2C_DRIVERNAME_TAS3001C "TAS3001c driver V " TAS3001C_VERSION
-#define I2C_DRIVERID_TAS3001C   (I2C_DRIVERID_TAS_BASE+0)
-
-extern  struct tas_driver_hooks_t tas3001c_hooks;
-extern struct tas_gain_t tas3001c_gain;
-extern struct tas_eq_pref_t *tas3001c_eq_prefs[];
-
-enum tas3001c_reg_t {
-  TAS3001C_REG_MCR                    = 0x01,
-  TAS3001C_REG_DRC                    = 0x02,
-
-  TAS3001C_REG_VOLUME                 = 0x04,
-  TAS3001C_REG_TREBLE                 = 0x05,
-  TAS3001C_REG_BASS                   = 0x06,
-  TAS3001C_REG_MIXER1                 = 0x07,
-  TAS3001C_REG_MIXER2                 = 0x08,
-
-  TAS3001C_REG_LEFT_BIQUAD0           = 0x0a,
-  TAS3001C_REG_LEFT_BIQUAD1           = 0x0b,
-  TAS3001C_REG_LEFT_BIQUAD2           = 0x0c,
-  TAS3001C_REG_LEFT_BIQUAD3           = 0x0d,
-  TAS3001C_REG_LEFT_BIQUAD4           = 0x0e,
-  TAS3001C_REG_LEFT_BIQUAD5           = 0x0f,
-  TAS3001C_REG_LEFT_BIQUAD6           = 0x10,
-  
-  TAS3001C_REG_RIGHT_BIQUAD0          = 0x13,
-  TAS3001C_REG_RIGHT_BIQUAD1          = 0x14,
-  TAS3001C_REG_RIGHT_BIQUAD2          = 0x15,
-  TAS3001C_REG_RIGHT_BIQUAD3          = 0x16,
-  TAS3001C_REG_RIGHT_BIQUAD4          = 0x17,
-  TAS3001C_REG_RIGHT_BIQUAD5          = 0x18,
-  TAS3001C_REG_RIGHT_BIQUAD6          = 0x19,
-
-  TAS3001C_REG_MAX                    = 0x20
-};
-
-#endif /* _TAS3001C_H_ */
diff --git a/sound/oss/dmasound/tas3001c_tables.c b/sound/oss/dmasound/tas3001c_tables.c
deleted file mode 100644
index 1768fa9..0000000
--- a/sound/oss/dmasound/tas3001c_tables.c
+++ /dev/null
@@ -1,375 +0,0 @@
-#include "tas_common.h"
-#include "tas_eq_prefs.h"
-
-static struct tas_drce_t eqp_0e_2_1_drce = {
-  .enable     = 1,
-  .above      = { .val = 3.0 * (1<<8), .expand = 0 },
-  .below      = { .val = 1.0 * (1<<8), .expand = 0 },
-  .threshold  = -15.33  * (1<<8),
-  .energy     = 2.4     * (1<<12),
-  .attack     = 0.013   * (1<<12),
-  .decay      = 0.212   * (1<<12),
-};
-
-static struct tas_biquad_ctrl_t eqp_0e_2_1_biquads[]={
-  { .channel = 0, .filter = 0, .data = { .coeff = { 0x0FCAD3, 0xE06A58, 0x0FCAD3, 0xE06B09, 0x0F9657 } } },
-  { .channel = 0, .filter = 1, .data = { .coeff = { 0x041731, 0x082E63, 0x041731, 0xFD8D08, 0x02CFBD } } },
-  { .channel = 0, .filter = 2, .data = { .coeff = { 0x0FFDC7, 0xE0524C, 0x0FBFAA, 0xE0524C, 0x0FBD72 } } },
-  { .channel = 0, .filter = 3, .data = { .coeff = { 0x0F3D35, 0xE228CA, 0x0EC7B2, 0xE228CA, 0x0E04E8 } } },
-  { .channel = 0, .filter = 4, .data = { .coeff = { 0x0FCEBF, 0xE181C2, 0x0F2656, 0xE181C2, 0x0EF516 } } },
-  { .channel = 0, .filter = 5, .data = { .coeff = { 0x0EC417, 0x073E22, 0x0B0633, 0x073E22, 0x09CA4A } } },
-
-  { .channel = 1, .filter = 0, .data = { .coeff = { 0x0FCAD3, 0xE06A58, 0x0FCAD3, 0xE06B09, 0x0F9657 } } },
-  { .channel = 1, .filter = 1, .data = { .coeff = { 0x041731, 0x082E63, 0x041731, 0xFD8D08, 0x02CFBD } } },
-  { .channel = 1, .filter = 2, .data = { .coeff = { 0x0FFDC7, 0xE0524C, 0x0FBFAA, 0xE0524C, 0x0FBD72 } } },
-  { .channel = 1, .filter = 3, .data = { .coeff = { 0x0F3D35, 0xE228CA, 0x0EC7B2, 0xE228CA, 0x0E04E8 } } },
-  { .channel = 1, .filter = 4, .data = { .coeff = { 0x0FCEBF, 0xE181C2, 0x0F2656, 0xE181C2, 0x0EF516 } } },
-  { .channel = 1, .filter = 5, .data = { .coeff = { 0x0EC417, 0x073E22, 0x0B0633, 0x073E22, 0x09CA4A } } },
-};
-
-static struct tas_eq_pref_t eqp_0e_2_1 = {
-  .sample_rate   = 44100,
-  .device_id     = 0x0e,
-  .output_id     = TAS_OUTPUT_EXTERNAL_SPKR,
-  .speaker_id    = 0x01,
-
-  .drce          = &eqp_0e_2_1_drce,
-
-  .filter_count  = 12,
-  .biquads       = eqp_0e_2_1_biquads
-};
-
-/* ======================================================================== */
-
-static struct tas_drce_t eqp_10_1_0_drce={
-  .enable     = 1,
-  .above      = { .val = 3.0 * (1<<8), .expand = 0 },
-  .below      = { .val = 1.0 * (1<<8), .expand = 0 },
-  .threshold  = -12.46  * (1<<8),
-  .energy     = 2.4     * (1<<12),
-  .attack     = 0.013   * (1<<12),
-  .decay      = 0.212   * (1<<12),
-};
-
-static struct tas_biquad_ctrl_t eqp_10_1_0_biquads[]={
-  { .channel = 0, .filter = 0, .data = { .coeff = { 0x0F4A12, 0xE16BDA, 0x0F4A12, 0xE173F0, 0x0E9C3A } } },
-  { .channel = 0, .filter = 1, .data = { .coeff = { 0x02DD54, 0x05BAA8, 0x02DD54, 0xF8001D, 0x037532 } } },
-  { .channel = 0, .filter = 2, .data = { .coeff = { 0x0E2FC7, 0xE4D5DC, 0x0D7477, 0xE4D5DC, 0x0BA43F } } },
-  { .channel = 0, .filter = 3, .data = { .coeff = { 0x0E7899, 0xE67CCA, 0x0D0E93, 0xE67CCA, 0x0B872D } } },
-  { .channel = 0, .filter = 4, .data = { .coeff = { 0x100000, 0x000000, 0x000000, 0x000000, 0x000000 } } },
-  { .channel = 0, .filter = 5, .data = { .coeff = { 0x100000, 0x000000, 0x000000, 0x000000, 0x000000 } } },
-
-  { .channel = 1, .filter = 0, .data = { .coeff = { 0x0F4A12, 0xE16BDA, 0x0F4A12, 0xE173F0, 0x0E9C3A } } },
-  { .channel = 1, .filter = 1, .data = { .coeff = { 0x02DD54, 0x05BAA8, 0x02DD54, 0xF8001D, 0x037532 } } },
-  { .channel = 1, .filter = 2, .data = { .coeff = { 0x0E2FC7, 0xE4D5DC, 0x0D7477, 0xE4D5DC, 0x0BA43F } } },
-  { .channel = 1, .filter = 3, .data = { .coeff = { 0x0E7899, 0xE67CCA, 0x0D0E93, 0xE67CCA, 0x0B872D } } },
-  { .channel = 1, .filter = 4, .data = { .coeff = { 0x100000, 0x000000, 0x000000, 0x000000, 0x000000 } } },
-  { .channel = 1, .filter = 5, .data = { .coeff = { 0x100000, 0x000000, 0x000000, 0x000000, 0x000000 } } },
-};
-
-static struct tas_eq_pref_t eqp_10_1_0 = {
-  .sample_rate   = 44100,
-  .device_id     = 0x10,
-  .output_id     = TAS_OUTPUT_INTERNAL_SPKR,
-  .speaker_id    = 0x00,
-
-  .drce          = &eqp_10_1_0_drce,
-
-  .filter_count  = 12,
-  .biquads       = eqp_10_1_0_biquads
-};
-
-/* ======================================================================== */
-
-static struct tas_drce_t eqp_15_2_1_drce={
-  .enable     = 1,
-  .above      = { .val = 3.0 * (1<<8), .expand = 0 },
-  .below      = { .val = 1.0 * (1<<8), .expand = 0 },
-  .threshold  = -15.33  * (1<<8),
-  .energy     = 2.4     * (1<<12),
-  .attack     = 0.013   * (1<<12),
-  .decay      = 0.212   * (1<<12),
-};
-
-static struct tas_biquad_ctrl_t eqp_15_2_1_biquads[]={
-  { .channel = 0, .filter = 0, .data = { .coeff = { 0x0FE143, 0xE05204, 0x0FCCC5, 0xE05266, 0x0FAE6B } } },
-  { .channel = 0, .filter = 1, .data = { .coeff = { 0x102383, 0xE03A03, 0x0FA325, 0xE03A03, 0x0FC6A8 } } },
-  { .channel = 0, .filter = 2, .data = { .coeff = { 0x0FF2AB, 0xE06285, 0x0FB20A, 0xE06285, 0x0FA4B5 } } },
-  { .channel = 0, .filter = 3, .data = { .coeff = { 0x0F544D, 0xE35971, 0x0D8F3A, 0xE35971, 0x0CE388 } } },
-  { .channel = 0, .filter = 4, .data = { .coeff = { 0x13E1D3, 0xF3ECB5, 0x042227, 0xF3ECB5, 0x0803FA } } },
-  { .channel = 0, .filter = 5, .data = { .coeff = { 0x0AC119, 0x034181, 0x078AB1, 0x034181, 0x024BCA } } },
-
-  { .channel = 1, .filter = 0, .data = { .coeff = { 0x0FE143, 0xE05204, 0x0FCCC5, 0xE05266, 0x0FAE6B } } },
-  { .channel = 1, .filter = 1, .data = { .coeff = { 0x102383, 0xE03A03, 0x0FA325, 0xE03A03, 0x0FC6A8 } } },
-  { .channel = 1, .filter = 2, .data = { .coeff = { 0x0FF2AB, 0xE06285, 0x0FB20A, 0xE06285, 0x0FA4B5 } } },
-  { .channel = 1, .filter = 3, .data = { .coeff = { 0x0F544D, 0xE35971, 0x0D8F3A, 0xE35971, 0x0CE388 } } },
-  { .channel = 1, .filter = 4, .data = { .coeff = { 0x13E1D3, 0xF3ECB5, 0x042227, 0xF3ECB5, 0x0803FA } } },
-  { .channel = 1, .filter = 5, .data = { .coeff = { 0x0AC119, 0x034181, 0x078AB1, 0x034181, 0x024BCA } } },
-};
-
-static struct tas_eq_pref_t eqp_15_2_1 = {
-  .sample_rate   = 44100,
-  .device_id     = 0x15,
-  .output_id     = TAS_OUTPUT_EXTERNAL_SPKR,
-  .speaker_id    = 0x01,
-
-  .drce          = &eqp_15_2_1_drce,
-
-  .filter_count  = 12,
-  .biquads       = eqp_15_2_1_biquads
-};
-
-/* ======================================================================== */
-
-static struct tas_drce_t eqp_15_1_0_drce={
-  .enable     = 1,
-  .above      = { .val = 3.0 * (1<<8), .expand = 0 },
-  .below      = { .val = 1.0 * (1<<8), .expand = 0 },
-  .threshold  = 0.0     * (1<<8),
-  .energy     = 2.4     * (1<<12),
-  .attack     = 0.013   * (1<<12),
-  .decay      = 0.212   * (1<<12),
-};
-
-static struct tas_biquad_ctrl_t eqp_15_1_0_biquads[]={
-  { .channel = 0, .filter = 0, .data = { .coeff = { 0x0FAD08, 0xE0A5EF, 0x0FAD08, 0xE0A79D, 0x0F5BBE } } },
-  { .channel = 0, .filter = 1, .data = { .coeff = { 0x04B38D, 0x09671B, 0x04B38D, 0x000F71, 0x02BEC5 } } },
-  { .channel = 0, .filter = 2, .data = { .coeff = { 0x0FDD32, 0xE0A56F, 0x0F8A69, 0xE0A56F, 0x0F679C } } },
-  { .channel = 0, .filter = 3, .data = { .coeff = { 0x0FD284, 0xE135FB, 0x0F2161, 0xE135FB, 0x0EF3E5 } } },
-  { .channel = 0, .filter = 4, .data = { .coeff = { 0x0E81B1, 0xE6283F, 0x0CE49D, 0xE6283F, 0x0B664F } } },
-  { .channel = 0, .filter = 5, .data = { .coeff = { 0x0F2D62, 0xE98797, 0x0D1E19, 0xE98797, 0x0C4B7B } } },
-
-  { .channel = 1, .filter = 0, .data = { .coeff = { 0x0FAD08, 0xE0A5EF, 0x0FAD08, 0xE0A79D, 0x0F5BBE } } },
-  { .channel = 1, .filter = 1, .data = { .coeff = { 0x04B38D, 0x09671B, 0x04B38D, 0x000F71, 0x02BEC5 } } },
-  { .channel = 1, .filter = 2, .data = { .coeff = { 0x0FDD32, 0xE0A56F, 0x0F8A69, 0xE0A56F, 0x0F679C } } },
-  { .channel = 1, .filter = 3, .data = { .coeff = { 0x0FD284, 0xE135FB, 0x0F2161, 0xE135FB, 0x0EF3E5 } } },
-  { .channel = 1, .filter = 4, .data = { .coeff = { 0x0E81B1, 0xE6283F, 0x0CE49D, 0xE6283F, 0x0B664F } } },
-  { .channel = 1, .filter = 5, .data = { .coeff = { 0x0F2D62, 0xE98797, 0x0D1E19, 0xE98797, 0x0C4B7B } } },
-};
-
-static struct tas_eq_pref_t eqp_15_1_0 = {
-  .sample_rate   = 44100,
-  .device_id     = 0x15,
-  .output_id     = TAS_OUTPUT_INTERNAL_SPKR,
-  .speaker_id    = 0x00,
-
-  .drce          = &eqp_15_1_0_drce,
-
-  .filter_count  = 12,
-  .biquads       = eqp_15_1_0_biquads
-};
-
-/* ======================================================================== */
-
-static struct tas_drce_t eqp_0f_2_1_drce={
-  .enable     = 1,
-  .above      = { .val = 3.0 * (1<<8), .expand = 0 },
-  .below      = { .val = 1.0 * (1<<8), .expand = 0 },
-  .threshold  = -15.33  * (1<<8),
-  .energy     = 2.4     * (1<<12),
-  .attack     = 0.013   * (1<<12),
-  .decay      = 0.212   * (1<<12),
-};
-
-static struct tas_biquad_ctrl_t eqp_0f_2_1_biquads[]={
-  { .channel = 0, .filter = 0, .data = { .coeff = { 0x0FE143, 0xE05204, 0x0FCCC5, 0xE05266, 0x0FAE6B } } },
-  { .channel = 0, .filter = 1, .data = { .coeff = { 0x102383, 0xE03A03, 0x0FA325, 0xE03A03, 0x0FC6A8 } } },
-  { .channel = 0, .filter = 2, .data = { .coeff = { 0x0FF2AB, 0xE06285, 0x0FB20A, 0xE06285, 0x0FA4B5 } } },
-  { .channel = 0, .filter = 3, .data = { .coeff = { 0x0F544D, 0xE35971, 0x0D8F3A, 0xE35971, 0x0CE388 } } },
-  { .channel = 0, .filter = 4, .data = { .coeff = { 0x13E1D3, 0xF3ECB5, 0x042227, 0xF3ECB5, 0x0803FA } } },
-  { .channel = 0, .filter = 5, .data = { .coeff = { 0x0AC119, 0x034181, 0x078AB1, 0x034181, 0x024BCA } } },
-
-  { .channel = 1, .filter = 0, .data = { .coeff = { 0x0FE143, 0xE05204, 0x0FCCC5, 0xE05266, 0x0FAE6B } } },
-  { .channel = 1, .filter = 1, .data = { .coeff = { 0x102383, 0xE03A03, 0x0FA325, 0xE03A03, 0x0FC6A8 } } },
-  { .channel = 1, .filter = 2, .data = { .coeff = { 0x0FF2AB, 0xE06285, 0x0FB20A, 0xE06285, 0x0FA4B5 } } },
-  { .channel = 1, .filter = 3, .data = { .coeff = { 0x0F544D, 0xE35971, 0x0D8F3A, 0xE35971, 0x0CE388 } } },
-  { .channel = 1, .filter = 4, .data = { .coeff = { 0x13E1D3, 0xF3ECB5, 0x042227, 0xF3ECB5, 0x0803FA } } },
-  { .channel = 1, .filter = 5, .data = { .coeff = { 0x0AC119, 0x034181, 0x078AB1, 0x034181, 0x024BCA } } },
-};
-
-static struct tas_eq_pref_t eqp_0f_2_1 = {
-  .sample_rate   = 44100,
-  .device_id     = 0x0f,
-  .output_id     = TAS_OUTPUT_EXTERNAL_SPKR,
-  .speaker_id    = 0x01,
-
-  .drce          = &eqp_0f_2_1_drce,
-
-  .filter_count  = 12,
-  .biquads       = eqp_0f_2_1_biquads
-};
-
-/* ======================================================================== */
-
-static struct tas_drce_t eqp_0f_1_0_drce={
-  .enable     = 1,
-  .above      = { .val = 3.0 * (1<<8), .expand = 0 },
-  .below      = { .val = 1.0 * (1<<8), .expand = 0 },
-  .threshold  = -15.33  * (1<<8),
-  .energy     = 2.4     * (1<<12),
-  .attack     = 0.013   * (1<<12),
-  .decay      = 0.212   * (1<<12),
-};
-
-static struct tas_biquad_ctrl_t eqp_0f_1_0_biquads[]={
-  { .channel = 0, .filter = 0, .data = { .coeff = { 0x0FCAD3, 0xE06A58, 0x0FCAD3, 0xE06B09, 0x0F9657 } } },
-  { .channel = 0, .filter = 1, .data = { .coeff = { 0x041731, 0x082E63, 0x041731, 0xFD8D08, 0x02CFBD } } },
-  { .channel = 0, .filter = 2, .data = { .coeff = { 0x0FFDC7, 0xE0524C, 0x0FBFAA, 0xE0524C, 0x0FBD72 } } },
-  { .channel = 0, .filter = 3, .data = { .coeff = { 0x0F3D35, 0xE228CA, 0x0EC7B2, 0xE228CA, 0x0E04E8 } } },
-  { .channel = 0, .filter = 4, .data = { .coeff = { 0x0FCEBF, 0xE181C2, 0x0F2656, 0xE181C2, 0x0EF516 } } },
-  { .channel = 0, .filter = 5, .data = { .coeff = { 0x0EC417, 0x073E22, 0x0B0633, 0x073E22, 0x09CA4A } } },
-
-  { .channel = 1, .filter = 0, .data = { .coeff = { 0x0FCAD3, 0xE06A58, 0x0FCAD3, 0xE06B09, 0x0F9657 } } },
-  { .channel = 1, .filter = 1, .data = { .coeff = { 0x041731, 0x082E63, 0x041731, 0xFD8D08, 0x02CFBD } } },
-  { .channel = 1, .filter = 2, .data = { .coeff = { 0x0FFDC7, 0xE0524C, 0x0FBFAA, 0xE0524C, 0x0FBD72 } } },
-  { .channel = 1, .filter = 3, .data = { .coeff = { 0x0F3D35, 0xE228CA, 0x0EC7B2, 0xE228CA, 0x0E04E8 } } },
-  { .channel = 1, .filter = 4, .data = { .coeff = { 0x0FCEBF, 0xE181C2, 0x0F2656, 0xE181C2, 0x0EF516 } } },
-  { .channel = 1, .filter = 5, .data = { .coeff = { 0x0EC417, 0x073E22, 0x0B0633, 0x073E22, 0x09CA4A } } },
-};
-
-static struct tas_eq_pref_t eqp_0f_1_0 = {
-  .sample_rate   = 44100,
-  .device_id     = 0x0f,
-  .output_id     = TAS_OUTPUT_INTERNAL_SPKR,
-  .speaker_id    = 0x00,
-
-  .drce          = &eqp_0f_1_0_drce,
-
-  .filter_count  = 12,
-  .biquads       = eqp_0f_1_0_biquads
-};
-
-/* ======================================================================== */
-
-static uint tas3001c_master_tab[]={
-	       0x0,       0x75,       0x9c,       0xbb,
-	      0xdb,       0xfb,      0x11e,      0x143,
-	     0x16b,      0x196,      0x1c3,      0x1f5,
-	     0x229,      0x263,      0x29f,      0x2e1,
-	     0x328,      0x373,      0x3c5,      0x41b,
-	     0x478,      0x4dc,      0x547,      0x5b8,
-	     0x633,      0x6b5,      0x740,      0x7d5,
-	     0x873,      0x91c,      0x9d2,      0xa92,
-	     0xb5e,      0xc39,      0xd22,      0xe19,
-	     0xf20,     0x1037,     0x1161,     0x129e,
-	    0x13ed,     0x1551,     0x16ca,     0x185d,
-	    0x1a08,     0x1bcc,     0x1dac,     0x1fa7,
-	    0x21c1,     0x23fa,     0x2655,     0x28d6,
-	    0x2b7c,     0x2e4a,     0x3141,     0x3464,
-	    0x37b4,     0x3b35,     0x3ee9,     0x42d3,
-	    0x46f6,     0x4b53,     0x4ff0,     0x54ce,
-	    0x59f2,     0x5f5f,     0x6519,     0x6b24,
-	    0x7183,     0x783c,     0x7f53,     0x86cc,
-	    0x8ead,     0x96fa,     0x9fba,     0xa8f2,
-	    0xb2a7,     0xbce1,     0xc7a5,     0xd2fa,
-	    0xdee8,     0xeb75,     0xf8aa,    0x1068e,
-	   0x1152a,    0x12487,    0x134ad,    0x145a5,
-	   0x1577b,    0x16a37,    0x17df5,    0x192bd,
-	   0x1a890,    0x1bf7b,    0x1d78d,    0x1f0d1,
-	   0x20b55,    0x22727,    0x24456,    0x262f2,
-	   0x2830b
-};
-
-static uint tas3001c_mixer_tab[]={
-	       0x0,      0x748,      0x9be,      0xbaf,
-	     0xda4,      0xfb1,     0x11de,     0x1431,
-	    0x16ad,     0x1959,     0x1c37,     0x1f4b,
-	    0x2298,     0x2628,     0x29fb,     0x2e12,
-	    0x327d,     0x3734,     0x3c47,     0x41b4,
-	    0x4787,     0x4dbe,     0x546d,     0x5b86,
-	    0x632e,     0x6b52,     0x7400,     0x7d54,
-	    0x873b,     0x91c6,     0x9d1a,     0xa920,
-	    0xb5e5,     0xc38c,     0xd21b,     0xe18f,
-	    0xf1f5,    0x1036a,    0x1160f,    0x129d6,
-	   0x13ed0,    0x1550c,    0x16ca0,    0x185c9,
-	   0x1a07b,    0x1bcc3,    0x1dab9,    0x1fa75,
-	   0x21c0f,    0x23fa3,    0x26552,    0x28d64,
-	   0x2b7c9,    0x2e4a2,    0x31411,    0x3463b,
-	   0x37b44,    0x3b353,    0x3ee94,    0x42d30,
-	   0x46f55,    0x4b533,    0x4fefc,    0x54ce5,
-	   0x59f25,    0x5f5f6,    0x65193,    0x6b23c,
-	   0x71835,    0x783c3,    0x7f52c,    0x86cc0,
-	   0x8eacc,    0x96fa5,    0x9fba0,    0xa8f1a,
-	   0xb2a71,    0xbce0a,    0xc7a4a,    0xd2fa0,
-	   0xdee7b,    0xeb752,    0xf8a9f,   0x1068e4,
-	  0x1152a3,   0x12486a,   0x134ac8,   0x145a55,
-	  0x1577ac,   0x16a370,   0x17df51,   0x192bc2,
-	  0x1a88f8,   0x1bf7b7,   0x1d78c9,   0x1f0d04,
-	  0x20b542,   0x227268,   0x244564,   0x262f26,
-	  0x2830af
-};
-
-static uint tas3001c_treble_tab[]={
-	      0x96,       0x95,       0x95,       0x94,
-	      0x93,       0x92,       0x92,       0x91,
-	      0x90,       0x90,       0x8f,       0x8e,
-	      0x8d,       0x8d,       0x8c,       0x8b,
-	      0x8a,       0x8a,       0x89,       0x88,
-	      0x88,       0x87,       0x86,       0x85,
-	      0x85,       0x84,       0x83,       0x83,
-	      0x82,       0x81,       0x80,       0x80,
-	      0x7f,       0x7e,       0x7e,       0x7d,
-	      0x7c,       0x7b,       0x7b,       0x7a,
-	      0x79,       0x78,       0x78,       0x77,
-	      0x76,       0x76,       0x75,       0x74,
-	      0x73,       0x73,       0x72,       0x71,
-	      0x71,       0x70,       0x6e,       0x6d,
-	      0x6d,       0x6c,       0x6b,       0x6a,
-	      0x69,       0x68,       0x67,       0x66,
-	      0x65,       0x63,       0x62,       0x62,
-	      0x60,       0x5f,       0x5d,       0x5c,
-	      0x5a,       0x58,       0x56,       0x55,
-	      0x53,       0x51,       0x4f,       0x4c,
-	      0x4a,       0x48,       0x45,       0x43,
-	      0x40,       0x3d,       0x3a,       0x37,
-	      0x35,       0x32,       0x2e,       0x2a,
-	      0x27,       0x22,       0x1e,       0x1a,
-	      0x15,       0x11,        0xc,        0x7,
-	       0x1
-};
-
-static uint tas3001c_bass_tab[]={
-	      0x86,       0x83,       0x81,       0x7f,
-	      0x7d,       0x7b,       0x79,       0x78,
-	      0x76,       0x75,       0x74,       0x72,
-	      0x71,       0x6f,       0x6e,       0x6d,
-	      0x6c,       0x6b,       0x69,       0x67,
-	      0x65,       0x64,       0x61,       0x60,
-	      0x5e,       0x5d,       0x5c,       0x5b,
-	      0x5a,       0x59,       0x58,       0x57,
-	      0x56,       0x55,       0x55,       0x54,
-	      0x53,       0x52,       0x50,       0x4f,
-	      0x4d,       0x4c,       0x4b,       0x49,
-	      0x47,       0x45,       0x44,       0x42,
-	      0x41,       0x3f,       0x3e,       0x3d,
-	      0x3c,       0x3b,       0x39,       0x38,
-	      0x37,       0x36,       0x35,       0x34,
-	      0x33,       0x31,       0x30,       0x2f,
-	      0x2e,       0x2c,       0x2b,       0x2b,
-	      0x29,       0x28,       0x27,       0x26,
-	      0x25,       0x24,       0x22,       0x21,
-	      0x20,       0x1e,       0x1c,       0x19,
-	      0x18,       0x18,       0x17,       0x16,
-	      0x15,       0x14,       0x13,       0x12,
-	      0x11,       0x10,        0xf,        0xe,
-	       0xd,        0xb,        0xa,        0x9,
-	       0x8,        0x6,        0x4,        0x2,
-	       0x1
-};
-
-struct tas_gain_t tas3001c_gain = {
-  .master  = tas3001c_master_tab,
-  .treble  = tas3001c_treble_tab,
-  .bass    = tas3001c_bass_tab,
-  .mixer   = tas3001c_mixer_tab
-};
-
-struct tas_eq_pref_t *tas3001c_eq_prefs[]={
-  &eqp_0e_2_1,
-  &eqp_10_1_0,
-  &eqp_15_2_1,
-  &eqp_15_1_0,
-  &eqp_0f_2_1,
-  &eqp_0f_1_0,
-  NULL
-};
diff --git a/sound/oss/dmasound/tas3004.c b/sound/oss/dmasound/tas3004.c
deleted file mode 100644
index 678bf0f..0000000
--- a/sound/oss/dmasound/tas3004.c
+++ /dev/null
@@ -1,1138 +0,0 @@
-/*
- * Driver for the i2c/i2s based TA3004 sound chip used
- * on some Apple hardware. Also known as "snapper".
- *
- * Tobias Sargeant <tobias.sargeant@bigpond.com>
- * Based upon tas3001c.c by Christopher C. Chimelis <chris@debian.org>:
- *
- * Input support by Renzo Davoli <renzo@cs.unibo.it>
- *
- */
-
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/proc_fs.h>
-#include <linux/ioport.h>
-#include <linux/sysctl.h>
-#include <linux/types.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/soundcard.h>
-#include <linux/interrupt.h>
-#include <linux/workqueue.h>
-
-#include <asm/uaccess.h>
-#include <asm/errno.h>
-#include <asm/io.h>
-#include <asm/prom.h>
-
-#include "dmasound.h"
-#include "tas_common.h"
-#include "tas3004.h"
-
-#include "tas_ioctl.h"
-
-/* #define DEBUG_DRCE */
-
-#define TAS3004_BIQUAD_FILTER_COUNT  7
-#define TAS3004_BIQUAD_CHANNEL_COUNT 2
-
-#define VOL_DEFAULT	(100 * 4 / 5)
-#define INPUT_DEFAULT	(100 * 4 / 5)
-#define BASS_DEFAULT	(100 / 2)
-#define TREBLE_DEFAULT	(100 / 2)
-
-struct tas3004_data_t {
-	struct tas_data_t super;
-	int device_id;
-	int output_id;
-	int speaker_id;
-	struct tas_drce_t drce_state;
-	struct work_struct change;
-};
-
-#define MAKE_TIME(sec,usec) (((sec)<<12) + (50000+(usec/10)*(1<<12))/100000)
-
-#define MAKE_RATIO(i,f) (((i)<<8) + ((500+(f)*(1<<8))/1000))
-
-
-static const union tas_biquad_t tas3004_eq_unity = {
-	.buf		 = { 0x100000, 0x000000, 0x000000, 0x000000, 0x000000 },
-};
-
-
-static const struct tas_drce_t tas3004_drce_min = {
-	.enable		= 1,
-	.above		= { .val = MAKE_RATIO(16,0), .expand = 0 },
-	.below		= { .val = MAKE_RATIO(2,0), .expand = 0 },
-	.threshold	= -0x59a0,
-	.energy		= MAKE_TIME(0,  1700),
-	.attack		= MAKE_TIME(0,  1700),
-	.decay		= MAKE_TIME(0,  1700),
-};
-
-
-static const struct tas_drce_t tas3004_drce_max = {
-	.enable		= 1,
-	.above		= { .val = MAKE_RATIO(1,500), .expand = 1 },
-	.below		= { .val = MAKE_RATIO(2,0), .expand = 1 },
-	.threshold	= -0x0,
-	.energy		= MAKE_TIME(2,400000),
-	.attack		= MAKE_TIME(2,400000),
-	.decay		= MAKE_TIME(2,400000),
-};
-
-
-static const unsigned short time_constants[]={
-	MAKE_TIME(0,  1700),
-	MAKE_TIME(0,  3500),
-	MAKE_TIME(0,  6700),
-	MAKE_TIME(0, 13000),
-	MAKE_TIME(0, 26000),
-	MAKE_TIME(0, 53000),
-	MAKE_TIME(0,106000),
-	MAKE_TIME(0,212000),
-	MAKE_TIME(0,425000),
-	MAKE_TIME(0,850000),
-	MAKE_TIME(1,700000),
-	MAKE_TIME(2,400000),
-};
-
-static const unsigned short above_threshold_compression_ratio[]={
-	MAKE_RATIO( 1, 70),
-	MAKE_RATIO( 1,140),
-	MAKE_RATIO( 1,230),
-	MAKE_RATIO( 1,330),
-	MAKE_RATIO( 1,450),
-	MAKE_RATIO( 1,600),
-	MAKE_RATIO( 1,780),
-	MAKE_RATIO( 2,  0),
-	MAKE_RATIO( 2,290),
-	MAKE_RATIO( 2,670),
-	MAKE_RATIO( 3,200),
-	MAKE_RATIO( 4,  0),
-	MAKE_RATIO( 5,330),
-	MAKE_RATIO( 8,  0),
-	MAKE_RATIO(16,  0),
-};
-
-static const unsigned short above_threshold_expansion_ratio[]={
-	MAKE_RATIO(1, 60),
-	MAKE_RATIO(1,130),
-	MAKE_RATIO(1,190),
-	MAKE_RATIO(1,250),
-	MAKE_RATIO(1,310),
-	MAKE_RATIO(1,380),
-	MAKE_RATIO(1,440),
-	MAKE_RATIO(1,500)
-};
-
-static const unsigned short below_threshold_compression_ratio[]={
-	MAKE_RATIO(1, 70),
-	MAKE_RATIO(1,140),
-	MAKE_RATIO(1,230),
-	MAKE_RATIO(1,330),
-	MAKE_RATIO(1,450),
-	MAKE_RATIO(1,600),
-	MAKE_RATIO(1,780),
-	MAKE_RATIO(2,  0)
-};
-
-static const unsigned short below_threshold_expansion_ratio[]={
-	MAKE_RATIO(1, 60),
-	MAKE_RATIO(1,130),
-	MAKE_RATIO(1,190),
-	MAKE_RATIO(1,250),
-	MAKE_RATIO(1,310),
-	MAKE_RATIO(1,380),
-	MAKE_RATIO(1,440),
-	MAKE_RATIO(1,500),
-	MAKE_RATIO(1,560),
-	MAKE_RATIO(1,630),
-	MAKE_RATIO(1,690),
-	MAKE_RATIO(1,750),
-	MAKE_RATIO(1,810),
-	MAKE_RATIO(1,880),
-	MAKE_RATIO(1,940),
-	MAKE_RATIO(2,  0)
-};
-
-static inline int
-search(	unsigned short val,
-	const unsigned short *arr,
-	const int arrsize) {
-	/*
-	 * This could be a binary search, but for small tables,
-	 * a linear search is likely to be faster
-	 */
-
-	int i;
-
-	for (i=0; i < arrsize; i++)
-		if (arr[i] >= val)
-			goto _1;
-	return arrsize-1;
- _1:
-	if (i == 0)
-		return 0;
-	return (arr[i]-val < val-arr[i-1]) ? i : i-1;
-}
-
-#define SEARCH(a, b) search(a, b, ARRAY_SIZE(b))
-
-static inline int
-time_index(unsigned short time)
-{
-	return SEARCH(time, time_constants);
-}
-
-
-static inline int
-above_threshold_compression_index(unsigned short ratio)
-{
-	return SEARCH(ratio, above_threshold_compression_ratio);
-}
-
-
-static inline int
-above_threshold_expansion_index(unsigned short ratio)
-{
-	return SEARCH(ratio, above_threshold_expansion_ratio);
-}
-
-
-static inline int
-below_threshold_compression_index(unsigned short ratio)
-{
-	return SEARCH(ratio, below_threshold_compression_ratio);
-}
-
-
-static inline int
-below_threshold_expansion_index(unsigned short ratio)
-{
-	return SEARCH(ratio, below_threshold_expansion_ratio);
-}
-
-static inline unsigned char db_to_regval(short db) {
-	int r=0;
-
-	r=(db+0x59a0) / 0x60;
-
-	if (r < 0x91) return 0x91;
-	if (r > 0xef) return 0xef;
-	return r;
-}
-
-static inline short quantize_db(short db)
-{
-	return db_to_regval(db) * 0x60 - 0x59a0;
-}
-
-static inline int
-register_width(enum tas3004_reg_t r)
-{
-	switch(r) {
-	case TAS3004_REG_MCR:
- 	case TAS3004_REG_TREBLE:
-	case TAS3004_REG_BASS:
-	case TAS3004_REG_ANALOG_CTRL:
-	case TAS3004_REG_TEST1:
-	case TAS3004_REG_TEST2:
-	case TAS3004_REG_MCR2:
-		return 1;
-
-	case TAS3004_REG_LEFT_LOUD_BIQUAD_GAIN:
-	case TAS3004_REG_RIGHT_LOUD_BIQUAD_GAIN:
-		return 3;
-
-	case TAS3004_REG_DRC:
-	case TAS3004_REG_VOLUME:
-		return 6;
-
-	case TAS3004_REG_LEFT_MIXER:
-	case TAS3004_REG_RIGHT_MIXER:
-		return 9;
-
-	case TAS3004_REG_TEST:
-		return 10;
-
-	case TAS3004_REG_LEFT_BIQUAD0:
-	case TAS3004_REG_LEFT_BIQUAD1:
-	case TAS3004_REG_LEFT_BIQUAD2:
-	case TAS3004_REG_LEFT_BIQUAD3:
-	case TAS3004_REG_LEFT_BIQUAD4:
-	case TAS3004_REG_LEFT_BIQUAD5:
-	case TAS3004_REG_LEFT_BIQUAD6:
-
-	case TAS3004_REG_RIGHT_BIQUAD0:
-	case TAS3004_REG_RIGHT_BIQUAD1:
-	case TAS3004_REG_RIGHT_BIQUAD2:
-	case TAS3004_REG_RIGHT_BIQUAD3:
-	case TAS3004_REG_RIGHT_BIQUAD4:
-	case TAS3004_REG_RIGHT_BIQUAD5:
-	case TAS3004_REG_RIGHT_BIQUAD6:
-
-	case TAS3004_REG_LEFT_LOUD_BIQUAD:
-	case TAS3004_REG_RIGHT_LOUD_BIQUAD:
-		return 15;
-
-	default:
-		return 0;
-	}
-}
-
-static int
-tas3004_write_register(	struct tas3004_data_t *self,
-			enum tas3004_reg_t reg_num,
-			char *data,
-			uint write_mode)
-{
-	if (reg_num==TAS3004_REG_MCR ||
-	    reg_num==TAS3004_REG_BASS ||
-	    reg_num==TAS3004_REG_TREBLE ||
-	    reg_num==TAS3004_REG_ANALOG_CTRL) {
-		return tas_write_byte_register(&self->super,
-					       (uint)reg_num,
-					       *data,
-					       write_mode);
-	} else {
-		return tas_write_register(&self->super,
-					  (uint)reg_num,
-					  register_width(reg_num),
-					  data,
-					  write_mode);
-	}
-}
-
-static int
-tas3004_sync_register(	struct tas3004_data_t *self,
-			enum tas3004_reg_t reg_num)
-{
-	if (reg_num==TAS3004_REG_MCR ||
-	    reg_num==TAS3004_REG_BASS ||
-	    reg_num==TAS3004_REG_TREBLE ||
-	    reg_num==TAS3004_REG_ANALOG_CTRL) {
-		return tas_sync_byte_register(&self->super,
-					      (uint)reg_num,
-					      register_width(reg_num));
-	} else {
-		return tas_sync_register(&self->super,
-					 (uint)reg_num,
-					 register_width(reg_num));
-	}
-}
-
-static int
-tas3004_read_register(	struct tas3004_data_t *self,
-			enum tas3004_reg_t reg_num,
-			char *data,
-			uint write_mode)
-{
-	return tas_read_register(&self->super,
-				 (uint)reg_num,
-				 register_width(reg_num),
-				 data);
-}
-
-static inline int
-tas3004_fast_load(struct tas3004_data_t *self, int fast)
-{
-	if (fast)
-		self->super.shadow[TAS3004_REG_MCR][0] |= 0x80;
-	else
-		self->super.shadow[TAS3004_REG_MCR][0] &= 0x7f;
-	return tas3004_sync_register(self,TAS3004_REG_MCR);
-}
-
-static uint
-tas3004_supported_mixers(struct tas3004_data_t *self)
-{
-	return SOUND_MASK_VOLUME |
-		SOUND_MASK_PCM |
-		SOUND_MASK_ALTPCM |
-		SOUND_MASK_IMIX |
-		SOUND_MASK_TREBLE |
-		SOUND_MASK_BASS |
-		SOUND_MASK_MIC |
-		SOUND_MASK_LINE;
-}
-
-static int
-tas3004_mixer_is_stereo(struct tas3004_data_t *self, int mixer)
-{
-	switch(mixer) {
-	case SOUND_MIXER_VOLUME:
-	case SOUND_MIXER_PCM:
-	case SOUND_MIXER_ALTPCM:
-	case SOUND_MIXER_IMIX:
-		return 1;
-	default:
-		return 0;
-	}
-}
-
-static uint
-tas3004_stereo_mixers(struct tas3004_data_t *self)
-{
-	uint r = tas3004_supported_mixers(self);
-	uint i;
-	
-	for (i=1; i<SOUND_MIXER_NRDEVICES; i++)
-		if (r&(1<<i) && !tas3004_mixer_is_stereo(self,i))
-			r &= ~(1<<i);
-	return r;
-}
-
-static int
-tas3004_get_mixer_level(struct tas3004_data_t *self, int mixer, uint *level)
-{
-	if (!self)
-		return -1;
-
-	*level = self->super.mixer[mixer];
-
-	return 0;
-}
-
-static int
-tas3004_set_mixer_level(struct tas3004_data_t *self, int mixer, uint level)
-{
-	int rc;
-	tas_shadow_t *shadow;
-	uint temp;
-	uint offset=0;
-
-	if (!self)
-		return -1;
-
-	shadow = self->super.shadow;
-
-	if (!tas3004_mixer_is_stereo(self,mixer))
-		level = tas_mono_to_stereo(level);
-	switch(mixer) {
-	case SOUND_MIXER_VOLUME:
-		temp = tas3004_gain.master[level&0xff];
-		SET_4_20(shadow[TAS3004_REG_VOLUME], 0, temp);
-		temp = tas3004_gain.master[(level>>8)&0xff];
-		SET_4_20(shadow[TAS3004_REG_VOLUME], 3, temp);
-		rc = tas3004_sync_register(self,TAS3004_REG_VOLUME);
-		break;
-	case SOUND_MIXER_IMIX:
-		offset += 3;
-	case SOUND_MIXER_ALTPCM:
-		offset += 3;
-	case SOUND_MIXER_PCM:
-		/*
-		 * Don't load these in fast mode. The documentation
-		 * says it can be done in either mode, but testing it
-		 * shows that fast mode produces ugly clicking.
-		*/
-		/* tas3004_fast_load(self,1); */
-		temp = tas3004_gain.mixer[level&0xff];
-		SET_4_20(shadow[TAS3004_REG_LEFT_MIXER], offset, temp);
-		temp = tas3004_gain.mixer[(level>>8)&0xff];
-		SET_4_20(shadow[TAS3004_REG_RIGHT_MIXER], offset, temp);
-		rc = tas3004_sync_register(self,TAS3004_REG_LEFT_MIXER);
-		if (rc == 0)
-			rc=tas3004_sync_register(self,TAS3004_REG_RIGHT_MIXER);
-		/* tas3004_fast_load(self,0); */
-		break;
-	case SOUND_MIXER_TREBLE:
-		temp = tas3004_gain.treble[level&0xff];
-		shadow[TAS3004_REG_TREBLE][0]=temp&0xff;
-		rc = tas3004_sync_register(self,TAS3004_REG_TREBLE);
-		break;
-	case SOUND_MIXER_BASS:
-		temp = tas3004_gain.bass[level&0xff];
-		shadow[TAS3004_REG_BASS][0]=temp&0xff;
-		rc = tas3004_sync_register(self,TAS3004_REG_BASS);
-		break;
-	case SOUND_MIXER_MIC:
-		if ((level&0xff)>0) {
-			software_input_volume = SW_INPUT_VOLUME_SCALE * (level&0xff);
-			if (self->super.mixer[mixer] == 0) {
-				self->super.mixer[SOUND_MIXER_LINE] = 0;
-				shadow[TAS3004_REG_ANALOG_CTRL][0]=0xc2;
-				rc = tas3004_sync_register(self,TAS3004_REG_ANALOG_CTRL);
-			} else rc=0;
-		} else {
-			self->super.mixer[SOUND_MIXER_LINE] = SW_INPUT_VOLUME_DEFAULT;
-			software_input_volume = SW_INPUT_VOLUME_SCALE *
-				(self->super.mixer[SOUND_MIXER_LINE]&0xff);
-			shadow[TAS3004_REG_ANALOG_CTRL][0]=0x00;
-			rc = tas3004_sync_register(self,TAS3004_REG_ANALOG_CTRL);
-		}
-		break;
-	case SOUND_MIXER_LINE:
-		if (self->super.mixer[SOUND_MIXER_MIC] == 0) {
-			software_input_volume = SW_INPUT_VOLUME_SCALE * (level&0xff);
-			rc=0;
-		}
-		break;
-	default:
-		rc = -1;
-		break;
-	}
-	if (rc < 0)
-		return rc;
-	self->super.mixer[mixer] = level;
-	
-	return 0;
-}
-
-static int
-tas3004_leave_sleep(struct tas3004_data_t *self)
-{
-	unsigned char mcr = (1<<6)+(2<<4)+(2<<2);
-
-	if (!self)
-		return -1;
-
-	/* Make sure something answers on the i2c bus */
-	if (tas3004_write_register(self, TAS3004_REG_MCR, &mcr,
-	    WRITE_NORMAL | FORCE_WRITE) < 0)
-		return -1;
-
-	tas3004_fast_load(self, 1);
-
-	(void)tas3004_sync_register(self,TAS3004_REG_RIGHT_BIQUAD0);
-	(void)tas3004_sync_register(self,TAS3004_REG_RIGHT_BIQUAD1);
-	(void)tas3004_sync_register(self,TAS3004_REG_RIGHT_BIQUAD2);
-	(void)tas3004_sync_register(self,TAS3004_REG_RIGHT_BIQUAD3);
-	(void)tas3004_sync_register(self,TAS3004_REG_RIGHT_BIQUAD4);
-	(void)tas3004_sync_register(self,TAS3004_REG_RIGHT_BIQUAD5);
-	(void)tas3004_sync_register(self,TAS3004_REG_RIGHT_BIQUAD6);
-
-	(void)tas3004_sync_register(self,TAS3004_REG_LEFT_BIQUAD0);
-	(void)tas3004_sync_register(self,TAS3004_REG_LEFT_BIQUAD1);
-	(void)tas3004_sync_register(self,TAS3004_REG_LEFT_BIQUAD2);
-	(void)tas3004_sync_register(self,TAS3004_REG_LEFT_BIQUAD3);
-	(void)tas3004_sync_register(self,TAS3004_REG_LEFT_BIQUAD4);
-	(void)tas3004_sync_register(self,TAS3004_REG_LEFT_BIQUAD5);
-	(void)tas3004_sync_register(self,TAS3004_REG_LEFT_BIQUAD6);
-
-	tas3004_fast_load(self, 0);
-
-	(void)tas3004_sync_register(self,TAS3004_REG_VOLUME);
-	(void)tas3004_sync_register(self,TAS3004_REG_LEFT_MIXER);
-	(void)tas3004_sync_register(self,TAS3004_REG_RIGHT_MIXER);
-	(void)tas3004_sync_register(self,TAS3004_REG_TREBLE);
-	(void)tas3004_sync_register(self,TAS3004_REG_BASS);
-	(void)tas3004_sync_register(self,TAS3004_REG_ANALOG_CTRL);
-
-	return 0;
-}
-
-static int
-tas3004_enter_sleep(struct tas3004_data_t *self)
-{
-	if (!self)
-		return -1; 
-	return 0;
-}
-
-static int
-tas3004_sync_biquad(	struct tas3004_data_t *self,
-			u_int channel,
-			u_int filter)
-{
-	enum tas3004_reg_t reg;
-
-	if (channel >= TAS3004_BIQUAD_CHANNEL_COUNT ||
-	    filter  >= TAS3004_BIQUAD_FILTER_COUNT) return -EINVAL;
-
-	reg=( channel ? TAS3004_REG_RIGHT_BIQUAD0 : TAS3004_REG_LEFT_BIQUAD0 ) + filter;
-
-	return tas3004_sync_register(self,reg);
-}
-
-static int
-tas3004_write_biquad_shadow(	struct tas3004_data_t *self,
-				u_int channel,
-				u_int filter,
-				const union tas_biquad_t *biquad)
-{
-	tas_shadow_t *shadow=self->super.shadow;
-	enum tas3004_reg_t reg;
-
-	if (channel >= TAS3004_BIQUAD_CHANNEL_COUNT ||
-	    filter  >= TAS3004_BIQUAD_FILTER_COUNT) return -EINVAL;
-
-	reg=( channel ? TAS3004_REG_RIGHT_BIQUAD0 : TAS3004_REG_LEFT_BIQUAD0 ) + filter;
-
-	SET_4_20(shadow[reg], 0,biquad->coeff.b0);
-	SET_4_20(shadow[reg], 3,biquad->coeff.b1);
-	SET_4_20(shadow[reg], 6,biquad->coeff.b2);
-	SET_4_20(shadow[reg], 9,biquad->coeff.a1);
-	SET_4_20(shadow[reg],12,biquad->coeff.a2);
-
-	return 0;
-}
-
-static int
-tas3004_write_biquad(	struct tas3004_data_t *self,
-			u_int channel,
-			u_int filter,
-			const union tas_biquad_t *biquad)
-{
-	int rc;
-
-	rc=tas3004_write_biquad_shadow(self, channel, filter, biquad);
-	if (rc < 0) return rc;
-
-	return tas3004_sync_biquad(self, channel, filter);
-}
-
-static int
-tas3004_write_biquad_list(	struct tas3004_data_t *self,
-				u_int filter_count,
-				u_int flags,
-				struct tas_biquad_ctrl_t *biquads)
-{
-	int i;
-	int rc;
-
-	if (flags & TAS_BIQUAD_FAST_LOAD) tas3004_fast_load(self,1);
-
-	for (i=0; i<filter_count; i++) {
-		rc=tas3004_write_biquad(self,
-					biquads[i].channel,
-					biquads[i].filter,
-					&biquads[i].data);
-		if (rc < 0) break;
-	}
-
-	if (flags & TAS_BIQUAD_FAST_LOAD) tas3004_fast_load(self,0);
-
-	return rc;
-}
-
-static int
-tas3004_read_biquad(	struct tas3004_data_t *self,
-			u_int channel,
-			u_int filter,
-			union tas_biquad_t *biquad)
-{
-	tas_shadow_t *shadow=self->super.shadow;
-	enum tas3004_reg_t reg;
-
-	if (channel >= TAS3004_BIQUAD_CHANNEL_COUNT ||
-	    filter  >= TAS3004_BIQUAD_FILTER_COUNT) return -EINVAL;
-
-	reg=( channel ? TAS3004_REG_RIGHT_BIQUAD0 : TAS3004_REG_LEFT_BIQUAD0 ) + filter;
-
-	biquad->coeff.b0=GET_4_20(shadow[reg], 0);
-	biquad->coeff.b1=GET_4_20(shadow[reg], 3);
-	biquad->coeff.b2=GET_4_20(shadow[reg], 6);
-	biquad->coeff.a1=GET_4_20(shadow[reg], 9);
-	biquad->coeff.a2=GET_4_20(shadow[reg],12);
-	
-	return 0;	
-}
-
-static int
-tas3004_eq_rw(	struct tas3004_data_t *self,
-		u_int cmd,
-		u_long arg)
-{
-	void __user *argp = (void __user *)arg;
-	int rc;
-	struct tas_biquad_ctrl_t biquad;
-
-	if (copy_from_user((void *)&biquad, argp, sizeof(struct tas_biquad_ctrl_t))) {
-		return -EFAULT;
-	}
-
-	if (cmd & SIOC_IN) {
-		rc=tas3004_write_biquad(self, biquad.channel, biquad.filter, &biquad.data);
-		if (rc != 0) return rc;
-	}
-
-	if (cmd & SIOC_OUT) {
-		rc=tas3004_read_biquad(self, biquad.channel, biquad.filter, &biquad.data);
-		if (rc != 0) return rc;
-
-		if (copy_to_user(argp, &biquad, sizeof(struct tas_biquad_ctrl_t))) {
-			return -EFAULT;
-		}
-
-	}
-	return 0;
-}
-
-static int
-tas3004_eq_list_rw(	struct tas3004_data_t *self,
-			u_int cmd,
-			u_long arg)
-{
-	int rc = 0;
-	int filter_count;
-	int flags;
-	int i,j;
-	char sync_required[TAS3004_BIQUAD_CHANNEL_COUNT][TAS3004_BIQUAD_FILTER_COUNT];
-	struct tas_biquad_ctrl_t biquad;
-	struct tas_biquad_ctrl_list_t __user *argp = (void __user *)arg;
-
-	memset(sync_required,0,sizeof(sync_required));
-
-	if (copy_from_user(&filter_count, &argp->filter_count, sizeof(int)))
-		return -EFAULT;
-
-	if (copy_from_user(&flags, &argp->flags, sizeof(int)))
-		return -EFAULT;
-
-	if (cmd & SIOC_IN) {
-	}
-
-	for (i=0; i < filter_count; i++) {
-		if (copy_from_user(&biquad, &argp->biquads[i],
-				   sizeof(struct tas_biquad_ctrl_t))) {
-			return -EFAULT;
-		}
-
-		if (cmd & SIOC_IN) {
-			sync_required[biquad.channel][biquad.filter]=1;
-			rc=tas3004_write_biquad_shadow(self, biquad.channel, biquad.filter, &biquad.data);
-			if (rc != 0) return rc;
-		}
-
-		if (cmd & SIOC_OUT) {
-			rc=tas3004_read_biquad(self, biquad.channel, biquad.filter, &biquad.data);
-			if (rc != 0) return rc;
-
-			if (copy_to_user(&argp->biquads[i], &biquad,
-					 sizeof(struct tas_biquad_ctrl_t))) {
-				return -EFAULT;
-			}
-		}
-	}
-
-	if (cmd & SIOC_IN) {
-		/*
-		 * This is OK for the tas3004. For the
-		 * tas3001c, going into fast load mode causes
-		 * the treble and bass to be reset to 0dB, and
-		 * volume controls to be muted.
-		 */
-		if (flags & TAS_BIQUAD_FAST_LOAD) tas3004_fast_load(self,1);
-		for (i=0; i<TAS3004_BIQUAD_CHANNEL_COUNT; i++) {
-			for (j=0; j<TAS3004_BIQUAD_FILTER_COUNT; j++) {
-				if (sync_required[i][j]) {
-					rc=tas3004_sync_biquad(self, i, j);
-					if (rc < 0) goto out;
-				}
-			}
-		}
-	out:
-		if (flags & TAS_BIQUAD_FAST_LOAD)
-			tas3004_fast_load(self,0);
-	}
-
-	return rc;
-}
-
-static int
-tas3004_update_drce(	struct tas3004_data_t *self,
-			int flags,
-			struct tas_drce_t *drce)
-{
-	tas_shadow_t *shadow;
-	int i;
-	shadow=self->super.shadow;
-
-	if (flags & TAS_DRCE_ABOVE_RATIO) {
-		self->drce_state.above.expand = drce->above.expand;
-		if (drce->above.val == (1<<8)) {
-			self->drce_state.above.val = 1<<8;
-			shadow[TAS3004_REG_DRC][0] = 0x02;
-					
-		} else if (drce->above.expand) {
-			i=above_threshold_expansion_index(drce->above.val);
-			self->drce_state.above.val=above_threshold_expansion_ratio[i];
-			shadow[TAS3004_REG_DRC][0] = 0x0a + (i<<3);
-		} else {
-			i=above_threshold_compression_index(drce->above.val);
-			self->drce_state.above.val=above_threshold_compression_ratio[i];
-			shadow[TAS3004_REG_DRC][0] = 0x08 + (i<<3);
-		}
-	}
-
-	if (flags & TAS_DRCE_BELOW_RATIO) {
-		self->drce_state.below.expand = drce->below.expand;
-		if (drce->below.val == (1<<8)) {
-			self->drce_state.below.val = 1<<8;
-			shadow[TAS3004_REG_DRC][1] = 0x02;
-					
-		} else if (drce->below.expand) {
-			i=below_threshold_expansion_index(drce->below.val);
-			self->drce_state.below.val=below_threshold_expansion_ratio[i];
-			shadow[TAS3004_REG_DRC][1] = 0x08 + (i<<3);
-		} else {
-			i=below_threshold_compression_index(drce->below.val);
-			self->drce_state.below.val=below_threshold_compression_ratio[i];
-			shadow[TAS3004_REG_DRC][1] = 0x0a + (i<<3);
-		}
-	}
-
-	if (flags & TAS_DRCE_THRESHOLD) {
-		self->drce_state.threshold=quantize_db(drce->threshold);
-		shadow[TAS3004_REG_DRC][2] = db_to_regval(self->drce_state.threshold);
-	}
-
-	if (flags & TAS_DRCE_ENERGY) {
-		i=time_index(drce->energy);
-		self->drce_state.energy=time_constants[i];
-		shadow[TAS3004_REG_DRC][3] = 0x40 + (i<<4);
-	}
-
-	if (flags & TAS_DRCE_ATTACK) {
-		i=time_index(drce->attack);
-		self->drce_state.attack=time_constants[i];
-		shadow[TAS3004_REG_DRC][4] = 0x40 + (i<<4);
-	}
-
-	if (flags & TAS_DRCE_DECAY) {
-		i=time_index(drce->decay);
-		self->drce_state.decay=time_constants[i];
-		shadow[TAS3004_REG_DRC][5] = 0x40 + (i<<4);
-	}
-
-	if (flags & TAS_DRCE_ENABLE) {
-		self->drce_state.enable = drce->enable;
-	}
-
-	if (!self->drce_state.enable) {
-		shadow[TAS3004_REG_DRC][0] |= 0x01;
-	}
-
-#ifdef DEBUG_DRCE
-	printk("DRCE: set [ ENABLE:%x ABOVE:%x/%x BELOW:%x/%x THRESH:%x ENERGY:%x ATTACK:%x DECAY:%x\n",
-	       self->drce_state.enable,
-	       self->drce_state.above.expand,self->drce_state.above.val,
-	       self->drce_state.below.expand,self->drce_state.below.val,
-	       self->drce_state.threshold,
-	       self->drce_state.energy,
-	       self->drce_state.attack,
-	       self->drce_state.decay);
-
-	printk("DRCE: reg [ %02x %02x %02x %02x %02x %02x ]\n",
-	       (unsigned char)shadow[TAS3004_REG_DRC][0],
-	       (unsigned char)shadow[TAS3004_REG_DRC][1],
-	       (unsigned char)shadow[TAS3004_REG_DRC][2],
-	       (unsigned char)shadow[TAS3004_REG_DRC][3],
-	       (unsigned char)shadow[TAS3004_REG_DRC][4],
-	       (unsigned char)shadow[TAS3004_REG_DRC][5]);
-#endif
-
-	return tas3004_sync_register(self, TAS3004_REG_DRC);
-}
-
-static int
-tas3004_drce_rw(	struct tas3004_data_t *self,
-			u_int cmd,
-			u_long arg)
-{
-	int rc;
-	struct tas_drce_ctrl_t drce_ctrl;
-	void __user *argp = (void __user *)arg;
-
-	if (copy_from_user(&drce_ctrl, argp, sizeof(struct tas_drce_ctrl_t)))
-		return -EFAULT;
-
-#ifdef DEBUG_DRCE
-	printk("DRCE: input [ FLAGS:%x ENABLE:%x ABOVE:%x/%x BELOW:%x/%x THRESH:%x ENERGY:%x ATTACK:%x DECAY:%x\n",
-	       drce_ctrl.flags,
-	       drce_ctrl.data.enable,
-	       drce_ctrl.data.above.expand,drce_ctrl.data.above.val,
-	       drce_ctrl.data.below.expand,drce_ctrl.data.below.val,
-	       drce_ctrl.data.threshold,
-	       drce_ctrl.data.energy,
-	       drce_ctrl.data.attack,
-	       drce_ctrl.data.decay);
-#endif
-
-	if (cmd & SIOC_IN) {
-		rc = tas3004_update_drce(self, drce_ctrl.flags, &drce_ctrl.data);
-		if (rc < 0) return rc;
-	}
-
-	if (cmd & SIOC_OUT) {
-		if (drce_ctrl.flags & TAS_DRCE_ENABLE)
-			drce_ctrl.data.enable = self->drce_state.enable;
-		if (drce_ctrl.flags & TAS_DRCE_ABOVE_RATIO)
-			drce_ctrl.data.above = self->drce_state.above;
-		if (drce_ctrl.flags & TAS_DRCE_BELOW_RATIO)
-			drce_ctrl.data.below = self->drce_state.below;
-		if (drce_ctrl.flags & TAS_DRCE_THRESHOLD)
-			drce_ctrl.data.threshold = self->drce_state.threshold;
-		if (drce_ctrl.flags & TAS_DRCE_ENERGY)
-			drce_ctrl.data.energy = self->drce_state.energy;
-		if (drce_ctrl.flags & TAS_DRCE_ATTACK)
-			drce_ctrl.data.attack = self->drce_state.attack;
-		if (drce_ctrl.flags & TAS_DRCE_DECAY)
-			drce_ctrl.data.decay = self->drce_state.decay;
-
-		if (copy_to_user(argp, &drce_ctrl,
-				 sizeof(struct tas_drce_ctrl_t))) {
-			return -EFAULT;
-		}
-	}
-
-	return 0;
-}
-
-static void
-tas3004_update_device_parameters(struct tas3004_data_t *self)
-{
-	char data;
-	int i;
-
-	if (!self) return;
-
-	if (self->output_id == TAS_OUTPUT_HEADPHONES) {
-		/* turn on allPass when headphones are plugged in */
-		data = 0x02;
-	} else {
-		data = 0x00;
-	}
-
-	tas3004_write_register(self, TAS3004_REG_MCR2, &data, WRITE_NORMAL | FORCE_WRITE);
-
-	for (i=0; tas3004_eq_prefs[i]; i++) {
-		struct tas_eq_pref_t *eq = tas3004_eq_prefs[i];
-
-		if (eq->device_id == self->device_id &&
-		    (eq->output_id == 0 || eq->output_id == self->output_id) &&
-		    (eq->speaker_id == 0 || eq->speaker_id == self->speaker_id)) {
-
-			tas3004_update_drce(self, TAS_DRCE_ALL, eq->drce);
-			tas3004_write_biquad_list(self, eq->filter_count, TAS_BIQUAD_FAST_LOAD, eq->biquads);
-
-			break;
-		}
-	}
-}
-
-static void
-tas3004_device_change_handler(struct work_struct *work)
-{
-	struct tas3004_data_t *self;
-	self = container_of(work, struct tas3004_data_t, change);
-	tas3004_update_device_parameters(self);
-}
-
-static int
-tas3004_output_device_change(	struct tas3004_data_t *self,
-				int device_id,
-				int output_id,
-				int speaker_id)
-{
-	self->device_id=device_id;
-	self->output_id=output_id;
-	self->speaker_id=speaker_id;
-
-	schedule_work(&self->change);
-
-	return 0;
-}
-
-static int
-tas3004_device_ioctl(	struct tas3004_data_t *self,
-			u_int cmd,
-			u_long arg)
-{
-	uint __user *argp = (void __user *)arg;
-	switch (cmd) {
-	case TAS_READ_EQ:
-	case TAS_WRITE_EQ:
-		return tas3004_eq_rw(self, cmd, arg);
-
-	case TAS_READ_EQ_LIST:
-	case TAS_WRITE_EQ_LIST:
-		return tas3004_eq_list_rw(self, cmd, arg);
-
-	case TAS_READ_EQ_FILTER_COUNT:
-		put_user(TAS3004_BIQUAD_FILTER_COUNT, argp);
-		return 0;
-
-	case TAS_READ_EQ_CHANNEL_COUNT:
-		put_user(TAS3004_BIQUAD_CHANNEL_COUNT, argp);
-		return 0;
-
-	case TAS_READ_DRCE:
-	case TAS_WRITE_DRCE:
-		return tas3004_drce_rw(self, cmd, arg);
-
-	case TAS_READ_DRCE_CAPS:
-		put_user(TAS_DRCE_ENABLE         |
-			 TAS_DRCE_ABOVE_RATIO    |
-			 TAS_DRCE_BELOW_RATIO    |
-			 TAS_DRCE_THRESHOLD      |
-			 TAS_DRCE_ENERGY         |
-			 TAS_DRCE_ATTACK         |
-			 TAS_DRCE_DECAY,
-			 argp);
-		return 0;
-
-	case TAS_READ_DRCE_MIN:
-	case TAS_READ_DRCE_MAX: {
-		struct tas_drce_ctrl_t drce_ctrl;
-		const struct tas_drce_t *drce_copy;
-
-		if (copy_from_user(&drce_ctrl, argp,
-				   sizeof(struct tas_drce_ctrl_t))) {
-			return -EFAULT;
-		}
-
-		if (cmd == TAS_READ_DRCE_MIN) {
-			drce_copy=&tas3004_drce_min;
-		} else {
-			drce_copy=&tas3004_drce_max;
-		}
-
-		if (drce_ctrl.flags & TAS_DRCE_ABOVE_RATIO) {
-			drce_ctrl.data.above=drce_copy->above;
-		}
-		if (drce_ctrl.flags & TAS_DRCE_BELOW_RATIO) {
-			drce_ctrl.data.below=drce_copy->below;
-		}
-		if (drce_ctrl.flags & TAS_DRCE_THRESHOLD) {
-			drce_ctrl.data.threshold=drce_copy->threshold;
-		}
-		if (drce_ctrl.flags & TAS_DRCE_ENERGY) {
-			drce_ctrl.data.energy=drce_copy->energy;
-		}
-		if (drce_ctrl.flags & TAS_DRCE_ATTACK) {
-			drce_ctrl.data.attack=drce_copy->attack;
-		}
-		if (drce_ctrl.flags & TAS_DRCE_DECAY) {
-			drce_ctrl.data.decay=drce_copy->decay;
-		}
-
-		if (copy_to_user(argp, &drce_ctrl,
-				 sizeof(struct tas_drce_ctrl_t))) {
-			return -EFAULT;
-		}
-	}
-	}
-
-	return -EINVAL;
-}
-
-static int
-tas3004_init_mixer(struct tas3004_data_t *self)
-{
-	unsigned char mcr = (1<<6)+(2<<4)+(2<<2);
-
-	/* Make sure something answers on the i2c bus */
-	if (tas3004_write_register(self, TAS3004_REG_MCR, &mcr,
-	    WRITE_NORMAL | FORCE_WRITE) < 0)
-		return -1;
-
-	tas3004_fast_load(self, 1);
-
-	(void)tas3004_sync_register(self,TAS3004_REG_RIGHT_BIQUAD0);
-	(void)tas3004_sync_register(self,TAS3004_REG_RIGHT_BIQUAD1);
-	(void)tas3004_sync_register(self,TAS3004_REG_RIGHT_BIQUAD2);
-	(void)tas3004_sync_register(self,TAS3004_REG_RIGHT_BIQUAD3);
-	(void)tas3004_sync_register(self,TAS3004_REG_RIGHT_BIQUAD4);
-	(void)tas3004_sync_register(self,TAS3004_REG_RIGHT_BIQUAD5);
-	(void)tas3004_sync_register(self,TAS3004_REG_RIGHT_BIQUAD6);
-
-	(void)tas3004_sync_register(self,TAS3004_REG_LEFT_BIQUAD0);
-	(void)tas3004_sync_register(self,TAS3004_REG_LEFT_BIQUAD1);
-	(void)tas3004_sync_register(self,TAS3004_REG_LEFT_BIQUAD2);
-	(void)tas3004_sync_register(self,TAS3004_REG_LEFT_BIQUAD3);
-	(void)tas3004_sync_register(self,TAS3004_REG_LEFT_BIQUAD4);
-	(void)tas3004_sync_register(self,TAS3004_REG_LEFT_BIQUAD5);
-	(void)tas3004_sync_register(self,TAS3004_REG_LEFT_BIQUAD6);
-
-	tas3004_sync_register(self, TAS3004_REG_DRC);
-
-	tas3004_sync_register(self, TAS3004_REG_MCR2);
-
-	tas3004_fast_load(self, 0);
-
-	tas3004_set_mixer_level(self, SOUND_MIXER_VOLUME, VOL_DEFAULT<<8 | VOL_DEFAULT);
-	tas3004_set_mixer_level(self, SOUND_MIXER_PCM, INPUT_DEFAULT<<8 | INPUT_DEFAULT);
-	tas3004_set_mixer_level(self, SOUND_MIXER_ALTPCM, 0);
-	tas3004_set_mixer_level(self, SOUND_MIXER_IMIX, 0);
-
-	tas3004_set_mixer_level(self, SOUND_MIXER_BASS, BASS_DEFAULT);
-	tas3004_set_mixer_level(self, SOUND_MIXER_TREBLE, TREBLE_DEFAULT);
-
-	tas3004_set_mixer_level(self, SOUND_MIXER_LINE,SW_INPUT_VOLUME_DEFAULT);
-
-	return 0;
-}
-
-static int
-tas3004_uninit_mixer(struct tas3004_data_t *self)
-{
-	tas3004_set_mixer_level(self, SOUND_MIXER_VOLUME, 0);
-	tas3004_set_mixer_level(self, SOUND_MIXER_PCM, 0);
-	tas3004_set_mixer_level(self, SOUND_MIXER_ALTPCM, 0);
-	tas3004_set_mixer_level(self, SOUND_MIXER_IMIX, 0);
-
-	tas3004_set_mixer_level(self, SOUND_MIXER_BASS, 0);
-	tas3004_set_mixer_level(self, SOUND_MIXER_TREBLE, 0);
-
-	tas3004_set_mixer_level(self, SOUND_MIXER_LINE, 0);
-
-	return 0;
-}
-
-static int
-tas3004_init(struct i2c_client *client)
-{
-	struct tas3004_data_t *self;
-	size_t sz = sizeof(*self) + (TAS3004_REG_MAX*sizeof(tas_shadow_t));
-	char drce_init[] = { 0x69, 0x22, 0x9f, 0xb0, 0x60, 0xa0 };
-	char mcr2 = 0;
-	int i, j;
-
-	self = kzalloc(sz, GFP_KERNEL);
-	if (!self)
-		return -ENOMEM;
-
-	self->super.client = client;
-	self->super.shadow = (tas_shadow_t *)(self+1);
-	self->output_id = TAS_OUTPUT_HEADPHONES;
-
-	dev_set_drvdata(&client->dev, self);
-
-	for (i = 0; i < TAS3004_BIQUAD_CHANNEL_COUNT; i++)
-		for (j = 0; j<TAS3004_BIQUAD_FILTER_COUNT; j++)
-			tas3004_write_biquad_shadow(self, i, j,
-					&tas3004_eq_unity);
-
-	tas3004_write_register(self, TAS3004_REG_MCR2, &mcr2, WRITE_SHADOW);
-	tas3004_write_register(self, TAS3004_REG_DRC, drce_init, WRITE_SHADOW);
-
-	INIT_WORK(&self->change, tas3004_device_change_handler);
-	return 0;
-}
-
-static void 
-tas3004_uninit(struct tas3004_data_t *self)
-{
-	tas3004_uninit_mixer(self);
-	kfree(self);
-}
-
-
-struct tas_driver_hooks_t tas3004_hooks = {
-	.init			= (tas_hook_init_t)tas3004_init,
-	.post_init		= (tas_hook_post_init_t)tas3004_init_mixer,
-	.uninit			= (tas_hook_uninit_t)tas3004_uninit,
-	.get_mixer_level	= (tas_hook_get_mixer_level_t)tas3004_get_mixer_level,
-	.set_mixer_level	= (tas_hook_set_mixer_level_t)tas3004_set_mixer_level,
-	.enter_sleep		= (tas_hook_enter_sleep_t)tas3004_enter_sleep,
-	.leave_sleep		= (tas_hook_leave_sleep_t)tas3004_leave_sleep,
-	.supported_mixers	= (tas_hook_supported_mixers_t)tas3004_supported_mixers,
-	.mixer_is_stereo	= (tas_hook_mixer_is_stereo_t)tas3004_mixer_is_stereo,
-	.stereo_mixers		= (tas_hook_stereo_mixers_t)tas3004_stereo_mixers,
-	.output_device_change	= (tas_hook_output_device_change_t)tas3004_output_device_change,
-	.device_ioctl		= (tas_hook_device_ioctl_t)tas3004_device_ioctl
-};
diff --git a/sound/oss/dmasound/tas3004.h b/sound/oss/dmasound/tas3004.h
deleted file mode 100644
index c6d584b..0000000
--- a/sound/oss/dmasound/tas3004.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * Header file for the i2c/i2s based TA3004 sound chip used
- * on some Apple hardware. Also known as "tumbler".
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License.  See the file COPYING in the main directory of this archive
- *  for more details.
- *
- * Written by Christopher C. Chimelis <chris@debian.org>
- */
-
-#ifndef _TAS3004_H_
-#define _TAS3004_H_
-
-#include <linux/types.h>
-
-#include "tas_common.h"
-#include "tas_eq_prefs.h"
-
-/*
- * Macros that correspond to the registers that we write to
- * when setting the various values.
- */
-
-#define TAS3004_VERSION	        "0.3"
-#define TAS3004_DATE	        "20011214"
-
-#define I2C_DRIVERNAME_TAS3004 "TAS3004 driver V " TAS3004_VERSION
-#define I2C_DRIVERID_TAS3004    (I2C_DRIVERID_TAS_BASE+1)
-
-extern  struct tas_driver_hooks_t tas3004_hooks;
-extern struct tas_gain_t tas3004_gain;
-extern struct tas_eq_pref_t *tas3004_eq_prefs[];
-
-enum tas3004_reg_t {
-  TAS3004_REG_MCR                    = 0x01,
-  TAS3004_REG_DRC                    = 0x02,
-
-  TAS3004_REG_VOLUME                 = 0x04,
-  TAS3004_REG_TREBLE                 = 0x05,
-  TAS3004_REG_BASS                   = 0x06,
-  TAS3004_REG_LEFT_MIXER             = 0x07,
-  TAS3004_REG_RIGHT_MIXER            = 0x08,
-
-  TAS3004_REG_LEFT_BIQUAD0           = 0x0a,
-  TAS3004_REG_LEFT_BIQUAD1           = 0x0b,
-  TAS3004_REG_LEFT_BIQUAD2           = 0x0c,
-  TAS3004_REG_LEFT_BIQUAD3           = 0x0d,
-  TAS3004_REG_LEFT_BIQUAD4           = 0x0e,
-  TAS3004_REG_LEFT_BIQUAD5           = 0x0f,
-  TAS3004_REG_LEFT_BIQUAD6           = 0x10,
-  
-  TAS3004_REG_RIGHT_BIQUAD0          = 0x13,
-  TAS3004_REG_RIGHT_BIQUAD1          = 0x14,
-  TAS3004_REG_RIGHT_BIQUAD2          = 0x15,
-  TAS3004_REG_RIGHT_BIQUAD3          = 0x16,
-  TAS3004_REG_RIGHT_BIQUAD4          = 0x17,
-  TAS3004_REG_RIGHT_BIQUAD5          = 0x18,
-  TAS3004_REG_RIGHT_BIQUAD6          = 0x19,
-
-  TAS3004_REG_LEFT_LOUD_BIQUAD       = 0x21,
-  TAS3004_REG_RIGHT_LOUD_BIQUAD      = 0x22,
-
-  TAS3004_REG_LEFT_LOUD_BIQUAD_GAIN  = 0x23,
-  TAS3004_REG_RIGHT_LOUD_BIQUAD_GAIN = 0x24,
-
-  TAS3004_REG_TEST                   = 0x29,
-
-  TAS3004_REG_ANALOG_CTRL            = 0x40,
-  TAS3004_REG_TEST1                  = 0x41,
-  TAS3004_REG_TEST2                  = 0x42,
-  TAS3004_REG_MCR2                   = 0x43,
-
-  TAS3004_REG_MAX                    = 0x44
-};
-
-#endif /* _TAS3004_H_ */
diff --git a/sound/oss/dmasound/tas3004_tables.c b/sound/oss/dmasound/tas3004_tables.c
deleted file mode 100644
index b910e0a..0000000
--- a/sound/oss/dmasound/tas3004_tables.c
+++ /dev/null
@@ -1,301 +0,0 @@
-#include "tas3004.h"
-#include "tas_eq_prefs.h"
-
-static struct tas_drce_t eqp_17_1_0_drce={
-    .enable     = 1,
-    .above      = { .val = 3.0 * (1<<8), .expand = 0 },
-    .below      = { .val = 1.0 * (1<<8), .expand = 0 },
-    .threshold  = -19.12  * (1<<8),
-    .energy     = 2.4     * (1<<12),
-    .attack     = 0.013   * (1<<12),
-    .decay      = 0.212   * (1<<12),
-};
-
-static struct tas_biquad_ctrl_t eqp_17_1_0_biquads[]={
-  { .channel = 0, .filter = 0, .data = { .coeff = { 0x0fd0d4, 0xe05e56, 0x0fd0d4, 0xe05ee1, 0x0fa234 } } },
-  { .channel = 0, .filter = 1, .data = { .coeff = { 0x0910d7, 0x088e1a, 0x030651, 0x01dcb1, 0x02c892 } } },
-  { .channel = 0, .filter = 2, .data = { .coeff = { 0x0ff895, 0xe0970b, 0x0f7f00, 0xe0970b, 0x0f7795 } } },
-  { .channel = 0, .filter = 3, .data = { .coeff = { 0x0fd1c4, 0xe1ac22, 0x0ec8cf, 0xe1ac22, 0x0e9a94 } } },
-  { .channel = 0, .filter = 4, .data = { .coeff = { 0x0f7c1c, 0xe3cc03, 0x0df786, 0xe3cc03, 0x0d73a2 } } },
-  { .channel = 0, .filter = 5, .data = { .coeff = { 0x11fb92, 0xf5a1a0, 0x073cd2, 0xf5a1a0, 0x093865 } } },
-  { .channel = 0, .filter = 6, .data = { .coeff = { 0x0e17a9, 0x068b6c, 0x08a0e5, 0x068b6c, 0x06b88e } } },
-
-  { .channel = 1, .filter = 0, .data = { .coeff = { 0x0fd0d4, 0xe05e56, 0x0fd0d4, 0xe05ee1, 0x0fa234 } } },
-  { .channel = 1, .filter = 1, .data = { .coeff = { 0x0910d7, 0x088e1a, 0x030651, 0x01dcb1, 0x02c892 } } },
-  { .channel = 1, .filter = 2, .data = { .coeff = { 0x0ff895, 0xe0970b, 0x0f7f00, 0xe0970b, 0x0f7795 } } },
-  { .channel = 1, .filter = 3, .data = { .coeff = { 0x0fd1c4, 0xe1ac22, 0x0ec8cf, 0xe1ac22, 0x0e9a94 } } },
-  { .channel = 1, .filter = 4, .data = { .coeff = { 0x0f7c1c, 0xe3cc03, 0x0df786, 0xe3cc03, 0x0d73a2 } } },
-  { .channel = 1, .filter = 5, .data = { .coeff = { 0x11fb92, 0xf5a1a0, 0x073cd2, 0xf5a1a0, 0x093865 } } },
-  { .channel = 1, .filter = 6, .data = { .coeff = { 0x0e17a9, 0x068b6c, 0x08a0e5, 0x068b6c, 0x06b88e } } }
-};
-
-static struct tas_eq_pref_t eqp_17_1_0 = {
-  .sample_rate   = 44100,
-  .device_id     = 0x17,
-  .output_id     = TAS_OUTPUT_INTERNAL_SPKR,
-  .speaker_id    = 0x00,
-
-  .drce          = &eqp_17_1_0_drce,
-
-  .filter_count  = 14,
-  .biquads       = eqp_17_1_0_biquads
-};
-
-/* ======================================================================== */
-
-static struct tas_drce_t eqp_18_1_0_drce={
-  .enable     = 1,
-  .above      = { .val = 3.0 * (1<<8), .expand = 0 },
-  .below      = { .val = 1.0 * (1<<8), .expand = 0 },
-  .threshold  = -13.14  * (1<<8),
-  .energy     = 2.4     * (1<<12),
-  .attack     = 0.013   * (1<<12),
-  .decay      = 0.212   * (1<<12),
-};
-
-static struct tas_biquad_ctrl_t eqp_18_1_0_biquads[]={
-  { .channel = 0, .filter = 0, .data = { .coeff = { 0x0f5514, 0xe155d7, 0x0f5514, 0xe15cfa, 0x0eb14b } } },
-  { .channel = 0, .filter = 1, .data = { .coeff = { 0x06ec33, 0x02abe3, 0x015eef, 0xf764d9, 0x03922d } } },
-  { .channel = 0, .filter = 2, .data = { .coeff = { 0x0ef5f2, 0xe67d1f, 0x0bcf37, 0xe67d1f, 0x0ac529 } } },
-  { .channel = 0, .filter = 3, .data = { .coeff = { 0x0db050, 0xe5be4d, 0x0d0c78, 0xe5be4d, 0x0abcc8 } } },
-  { .channel = 0, .filter = 4, .data = { .coeff = { 0x0f1298, 0xe64ec6, 0x0cc03e, 0xe64ec6, 0x0bd2d7 } } },
-  { .channel = 0, .filter = 5, .data = { .coeff = { 0x0c641a, 0x06537a, 0x08d155, 0x06537a, 0x053570 } } },
-  { .channel = 0, .filter = 6, .data = { .coeff = { 0x100000, 0x000000, 0x000000, 0x000000, 0x000000 } } },
-
-  { .channel = 1, .filter = 0, .data = { .coeff = { 0x0f5514, 0xe155d7, 0x0f5514, 0xe15cfa, 0x0eb14b } } },
-  { .channel = 1, .filter = 1, .data = { .coeff = { 0x06ec33, 0x02abe3, 0x015eef, 0xf764d9, 0x03922d } } },
-  { .channel = 1, .filter = 2, .data = { .coeff = { 0x0ef5f2, 0xe67d1f, 0x0bcf37, 0xe67d1f, 0x0ac529 } } },
-  { .channel = 1, .filter = 3, .data = { .coeff = { 0x0db050, 0xe5be4d, 0x0d0c78, 0xe5be4d, 0x0abcc8 } } },
-  { .channel = 1, .filter = 4, .data = { .coeff = { 0x0f1298, 0xe64ec6, 0x0cc03e, 0xe64ec6, 0x0bd2d7 } } },
-  { .channel = 1, .filter = 5, .data = { .coeff = { 0x0c641a, 0x06537a, 0x08d155, 0x06537a, 0x053570 } } },
-  { .channel = 1, .filter = 6, .data = { .coeff = { 0x100000, 0x000000, 0x000000, 0x000000, 0x000000 } } }
-};
-
-static struct tas_eq_pref_t eqp_18_1_0 = {
-  .sample_rate   = 44100,
-  .device_id     = 0x18,
-  .output_id     = TAS_OUTPUT_INTERNAL_SPKR,
-  .speaker_id    = 0x00,
-
-  .drce          = &eqp_18_1_0_drce,
-
-  .filter_count  = 14,
-  .biquads       = eqp_18_1_0_biquads
-};
-
-/* ======================================================================== */
-
-static struct tas_drce_t eqp_1a_1_0_drce={
-  .enable     = 1,
-  .above      = { .val = 3.0 * (1<<8), .expand = 0 },
-  .below      = { .val = 1.0 * (1<<8), .expand = 0 },
-  .threshold  = -10.75  * (1<<8),
-  .energy     = 2.4     * (1<<12),
-  .attack     = 0.013   * (1<<12),
-  .decay      = 0.212   * (1<<12),
-};
-
-static struct tas_biquad_ctrl_t eqp_1a_1_0_biquads[]={
-  { .channel = 0, .filter = 0, .data = { .coeff = { 0x0fb8fd, 0xe08e04, 0x0fb8fd, 0xe08f40, 0x0f7336 } } },
-  { .channel = 0, .filter = 1, .data = { .coeff = { 0x06371d, 0x0c6e3a, 0x06371d, 0x05bfd3, 0x031ca2 } } },
-  { .channel = 0, .filter = 2, .data = { .coeff = { 0x0fa1c0, 0xe18692, 0x0f030e, 0xe18692, 0x0ea4ce } } },
-  { .channel = 0, .filter = 3, .data = { .coeff = { 0x0fe495, 0xe17eff, 0x0f0452, 0xe17eff, 0x0ee8e7 } } },
-  { .channel = 0, .filter = 4, .data = { .coeff = { 0x100857, 0xe7e71c, 0x0e9599, 0xe7e71c, 0x0e9df1 } } },
-  { .channel = 0, .filter = 5, .data = { .coeff = { 0x0fb26e, 0x06a82c, 0x0db2b4, 0x06a82c, 0x0d6522 } } },
-  { .channel = 0, .filter = 6, .data = { .coeff = { 0x11419d, 0xf06cbf, 0x0a4f6e, 0xf06cbf, 0x0b910c } } },
-
-  { .channel = 1, .filter = 0, .data = { .coeff = { 0x0fb8fd, 0xe08e04, 0x0fb8fd, 0xe08f40, 0x0f7336 } } },
-  { .channel = 1, .filter = 1, .data = { .coeff = { 0x06371d, 0x0c6e3a, 0x06371d, 0x05bfd3, 0x031ca2 } } },
-  { .channel = 1, .filter = 2, .data = { .coeff = { 0x0fa1c0, 0xe18692, 0x0f030e, 0xe18692, 0x0ea4ce } } },
-  { .channel = 1, .filter = 3, .data = { .coeff = { 0x0fe495, 0xe17eff, 0x0f0452, 0xe17eff, 0x0ee8e7 } } },
-  { .channel = 1, .filter = 4, .data = { .coeff = { 0x100857, 0xe7e71c, 0x0e9599, 0xe7e71c, 0x0e9df1 } } },
-  { .channel = 1, .filter = 5, .data = { .coeff = { 0x0fb26e, 0x06a82c, 0x0db2b4, 0x06a82c, 0x0d6522 } } },
-  { .channel = 1, .filter = 6, .data = { .coeff = { 0x11419d, 0xf06cbf, 0x0a4f6e, 0xf06cbf, 0x0b910c } } }
-};
-
-static struct tas_eq_pref_t eqp_1a_1_0 = {
-  .sample_rate   = 44100,
-  .device_id     = 0x1a,
-  .output_id     = TAS_OUTPUT_INTERNAL_SPKR,
-  .speaker_id    = 0x00,
-
-  .drce          = &eqp_1a_1_0_drce,
-
-  .filter_count  = 14,
-  .biquads       = eqp_1a_1_0_biquads
-};
-
-/* ======================================================================== */
-
-static struct tas_drce_t eqp_1c_1_0_drce={
-  .enable     = 1,
-  .above      = { .val = 3.0 * (1<<8), .expand = 0 },
-  .below      = { .val = 1.0 * (1<<8), .expand = 0 },
-  .threshold  = -14.34  * (1<<8),
-  .energy     = 2.4     * (1<<12),
-  .attack     = 0.013   * (1<<12),
-  .decay      = 0.212   * (1<<12),
-};
-
-static struct tas_biquad_ctrl_t eqp_1c_1_0_biquads[]={
-  { .channel = 0, .filter = 0, .data = { .coeff = { 0x0f4f95, 0xe160d4, 0x0f4f95, 0xe1686e, 0x0ea6c5 } } },
-  { .channel = 0, .filter = 1, .data = { .coeff = { 0x066b92, 0x0290d4, 0x0148a0, 0xf6853f, 0x03bfc7 } } },
-  { .channel = 0, .filter = 2, .data = { .coeff = { 0x0f57dc, 0xe51c91, 0x0dd1cb, 0xe51c91, 0x0d29a8 } } },
-  { .channel = 0, .filter = 3, .data = { .coeff = { 0x0df1cb, 0xe4fa84, 0x0d7cdc, 0xe4fa84, 0x0b6ea7 } } },
-  { .channel = 0, .filter = 4, .data = { .coeff = { 0x0eba36, 0xe6aa48, 0x0b9f52, 0xe6aa48, 0x0a5989 } } },
-  { .channel = 0, .filter = 5, .data = { .coeff = { 0x0caf02, 0x05ef9d, 0x084beb, 0x05ef9d, 0x04faee } } },
-  { .channel = 0, .filter = 6, .data = { .coeff = { 0x0fc686, 0xe22947, 0x0e4b5d, 0xe22947, 0x0e11e4 } } },
-
-  { .channel = 1, .filter = 0, .data = { .coeff = { 0x0f4f95, 0xe160d4, 0x0f4f95, 0xe1686e, 0x0ea6c5 } } },
-  { .channel = 1, .filter = 1, .data = { .coeff = { 0x066b92, 0x0290d4, 0x0148a0, 0xf6853f, 0x03bfc7 } } },
-  { .channel = 1, .filter = 2, .data = { .coeff = { 0x0f57dc, 0xe51c91, 0x0dd1cb, 0xe51c91, 0x0d29a8 } } },
-  { .channel = 1, .filter = 3, .data = { .coeff = { 0x0df1cb, 0xe4fa84, 0x0d7cdc, 0xe4fa84, 0x0b6ea7 } } },
-  { .channel = 1, .filter = 4, .data = { .coeff = { 0x0eba36, 0xe6aa48, 0x0b9f52, 0xe6aa48, 0x0a5989 } } },
-  { .channel = 1, .filter = 5, .data = { .coeff = { 0x0caf02, 0x05ef9d, 0x084beb, 0x05ef9d, 0x04faee } } },
-  { .channel = 1, .filter = 6, .data = { .coeff = { 0x0fc686, 0xe22947, 0x0e4b5d, 0xe22947, 0x0e11e4 } } }
-};
-
-static struct tas_eq_pref_t eqp_1c_1_0 = {
-  .sample_rate   = 44100,
-  .device_id     = 0x1c,
-  .output_id     = TAS_OUTPUT_INTERNAL_SPKR,
-  .speaker_id    = 0x00,
-
-  .drce          = &eqp_1c_1_0_drce,
-
-  .filter_count  = 14,
-  .biquads       = eqp_1c_1_0_biquads
-};
-
-/* ======================================================================== */
-
-static uint tas3004_master_tab[]={
-	       0x0,       0x75,       0x9c,       0xbb,
-	      0xdb,       0xfb,      0x11e,      0x143,
-	     0x16b,      0x196,      0x1c3,      0x1f5,
-	     0x229,      0x263,      0x29f,      0x2e1,
-	     0x328,      0x373,      0x3c5,      0x41b,
-	     0x478,      0x4dc,      0x547,      0x5b8,
-	     0x633,      0x6b5,      0x740,      0x7d5,
-	     0x873,      0x91c,      0x9d2,      0xa92,
-	     0xb5e,      0xc39,      0xd22,      0xe19,
-	     0xf20,     0x1037,     0x1161,     0x129e,
-	    0x13ed,     0x1551,     0x16ca,     0x185d,
-	    0x1a08,     0x1bcc,     0x1dac,     0x1fa7,
-	    0x21c1,     0x23fa,     0x2655,     0x28d6,
-	    0x2b7c,     0x2e4a,     0x3141,     0x3464,
-	    0x37b4,     0x3b35,     0x3ee9,     0x42d3,
-	    0x46f6,     0x4b53,     0x4ff0,     0x54ce,
-	    0x59f2,     0x5f5f,     0x6519,     0x6b24,
-	    0x7183,     0x783c,     0x7f53,     0x86cc,
-	    0x8ead,     0x96fa,     0x9fba,     0xa8f2,
-	    0xb2a7,     0xbce1,     0xc7a5,     0xd2fa,
-	    0xdee8,     0xeb75,     0xf8aa,    0x1068e,
-	   0x1152a,    0x12487,    0x134ad,    0x145a5,
-	   0x1577b,    0x16a37,    0x17df5,    0x192bd,
-	   0x1a890,    0x1bf7b,    0x1d78d,    0x1f0d1,
-	   0x20b55,    0x22727,    0x24456,    0x262f2,
-	   0x2830b
-};
-
-static uint tas3004_mixer_tab[]={
-	       0x0,      0x748,      0x9be,      0xbaf,
-	     0xda4,      0xfb1,     0x11de,     0x1431,
-	    0x16ad,     0x1959,     0x1c37,     0x1f4b,
-	    0x2298,     0x2628,     0x29fb,     0x2e12,
-	    0x327d,     0x3734,     0x3c47,     0x41b4,
-	    0x4787,     0x4dbe,     0x546d,     0x5b86,
-	    0x632e,     0x6b52,     0x7400,     0x7d54,
-	    0x873b,     0x91c6,     0x9d1a,     0xa920,
-	    0xb5e5,     0xc38c,     0xd21b,     0xe18f,
-	    0xf1f5,    0x1036a,    0x1160f,    0x129d6,
-	   0x13ed0,    0x1550c,    0x16ca0,    0x185c9,
-	   0x1a07b,    0x1bcc3,    0x1dab9,    0x1fa75,
-	   0x21c0f,    0x23fa3,    0x26552,    0x28d64,
-	   0x2b7c9,    0x2e4a2,    0x31411,    0x3463b,
-	   0x37b44,    0x3b353,    0x3ee94,    0x42d30,
-	   0x46f55,    0x4b533,    0x4fefc,    0x54ce5,
-	   0x59f25,    0x5f5f6,    0x65193,    0x6b23c,
-	   0x71835,    0x783c3,    0x7f52c,    0x86cc0,
-	   0x8eacc,    0x96fa5,    0x9fba0,    0xa8f1a,
-	   0xb2a71,    0xbce0a,    0xc7a4a,    0xd2fa0,
-	   0xdee7b,    0xeb752,    0xf8a9f,   0x1068e4,
-	  0x1152a3,   0x12486a,   0x134ac8,   0x145a55,
-	  0x1577ac,   0x16a370,   0x17df51,   0x192bc2,
-	  0x1a88f8,   0x1bf7b7,   0x1d78c9,   0x1f0d04,
-	  0x20b542,   0x227268,   0x244564,   0x262f26,
-	  0x2830af
-};
-
-static uint tas3004_treble_tab[]={
-	      0x96,       0x95,       0x95,       0x94,
-	      0x93,       0x92,       0x92,       0x91,
-	      0x90,       0x90,       0x8f,       0x8e,
-	      0x8d,       0x8d,       0x8c,       0x8b,
-	      0x8a,       0x8a,       0x89,       0x88,
-	      0x88,       0x87,       0x86,       0x85,
-	      0x85,       0x84,       0x83,       0x83,
-	      0x82,       0x81,       0x80,       0x80,
-	      0x7f,       0x7e,       0x7e,       0x7d,
-	      0x7c,       0x7b,       0x7b,       0x7a,
-	      0x79,       0x78,       0x78,       0x77,
-	      0x76,       0x76,       0x75,       0x74,
-	      0x73,       0x73,       0x72,       0x71,
-	      0x71,       0x68,       0x45,       0x5b,
-	      0x6d,       0x6c,       0x6b,       0x6a,
-	      0x69,       0x68,       0x67,       0x66,
-	      0x65,       0x63,       0x62,       0x62,
-	      0x60,       0x5e,       0x5c,       0x5b,
-	      0x59,       0x57,       0x55,       0x53,
-	      0x52,       0x4f,       0x4d,       0x4a,
-	      0x48,       0x46,       0x43,       0x40,
-	      0x3d,       0x3a,       0x36,       0x33,
-	      0x2f,       0x2c,       0x27,       0x23,
-	      0x1f,       0x1a,       0x15,        0xf,
-	       0x8,        0x5,        0x2,        0x1,
-	       0x1
-};
-
-static uint tas3004_bass_tab[]={
-	      0x96,       0x95,       0x95,       0x94,
-	      0x93,       0x92,       0x92,       0x91,
-	      0x90,       0x90,       0x8f,       0x8e,
-	      0x8d,       0x8d,       0x8c,       0x8b,
-	      0x8a,       0x8a,       0x89,       0x88,
-	      0x88,       0x87,       0x86,       0x85,
-	      0x85,       0x84,       0x83,       0x83,
-	      0x82,       0x81,       0x80,       0x80,
-	      0x7f,       0x7e,       0x7e,       0x7d,
-	      0x7c,       0x7b,       0x7b,       0x7a,
-	      0x79,       0x78,       0x78,       0x77,
-	      0x76,       0x76,       0x75,       0x74,
-	      0x73,       0x73,       0x72,       0x71,
-	      0x70,       0x6f,       0x6e,       0x6d,
-	      0x6c,       0x6b,       0x6a,       0x6a,
-	      0x69,       0x67,       0x66,       0x66,
-	      0x65,       0x63,       0x62,       0x62,
-	      0x61,       0x60,       0x5e,       0x5d,
-	      0x5b,       0x59,       0x57,       0x55,
-	      0x53,       0x51,       0x4f,       0x4c,
-	      0x4a,       0x48,       0x46,       0x44,
-	      0x41,       0x3e,       0x3b,       0x38,
-	      0x36,       0x33,       0x2f,       0x2b,
-	      0x28,       0x24,       0x20,       0x1c,
-	      0x17,       0x12,        0xd,        0x7,
-	       0x1
-};
-
-struct tas_gain_t tas3004_gain={
-  .master  = tas3004_master_tab,
-  .treble  = tas3004_treble_tab,
-  .bass    = tas3004_bass_tab,
-  .mixer   = tas3004_mixer_tab
-};
-
-struct tas_eq_pref_t *tas3004_eq_prefs[]={
-  &eqp_17_1_0,
-  &eqp_18_1_0,
-  &eqp_1a_1_0,
-  &eqp_1c_1_0,
-  NULL
-};
diff --git a/sound/oss/dmasound/tas_common.c b/sound/oss/dmasound/tas_common.c
deleted file mode 100644
index b295ef6..0000000
--- a/sound/oss/dmasound/tas_common.c
+++ /dev/null
@@ -1,214 +0,0 @@
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/proc_fs.h>
-#include <linux/ioport.h>
-#include <linux/sysctl.h>
-#include <linux/types.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/soundcard.h>
-#include <asm/uaccess.h>
-#include <asm/errno.h>
-#include <asm/io.h>
-#include <asm/prom.h>
-
-#include "tas_common.h"
-
-#define CALL0(proc)								\
-	do {									\
-		struct tas_data_t *self;					\
-		if (!tas_client || driver_hooks == NULL)			\
-			return -1;						\
-		self = dev_get_drvdata(&tas_client->dev);			\
-		if (driver_hooks->proc)						\
-			return driver_hooks->proc(self);			\
-		else								\
-			return -EINVAL;						\
-	} while (0)
-
-#define CALL(proc,arg...)							\
-	do {									\
-		struct tas_data_t *self;					\
-		if (!tas_client || driver_hooks == NULL)			\
-			return -1;						\
-		self = dev_get_drvdata(&tas_client->dev);			\
-		if (driver_hooks->proc)						\
-			return driver_hooks->proc(self, ## arg);		\
-		else								\
-			return -EINVAL;						\
-	} while (0)
-
-
-static u8 tas_i2c_address = 0x34;
-static struct i2c_client *tas_client;
-
-static int tas_attach_adapter(struct i2c_adapter *);
-static int tas_detach_client(struct i2c_client *);
-
-struct i2c_driver tas_driver = {
-	.driver = {
-		.name	= "tas",
-	},
-	.attach_adapter	= tas_attach_adapter,
-	.detach_client	= tas_detach_client,
-};
-
-struct tas_driver_hooks_t *driver_hooks;
-
-int
-tas_register_driver(struct tas_driver_hooks_t *hooks)
-{
-	driver_hooks = hooks;
-	return 0;
-}
-
-int
-tas_get_mixer_level(int mixer, uint *level)
-{
-	CALL(get_mixer_level,mixer,level);
-}
-
-int
-tas_set_mixer_level(int mixer,uint level)
-{
-	CALL(set_mixer_level,mixer,level);
-}
-
-int
-tas_enter_sleep(void)
-{
-	CALL0(enter_sleep);
-}
-
-int
-tas_leave_sleep(void)
-{
-	CALL0(leave_sleep);
-}
-
-int
-tas_supported_mixers(void)
-{
-	CALL0(supported_mixers);
-}
-
-int
-tas_mixer_is_stereo(int mixer)
-{
-	CALL(mixer_is_stereo,mixer);
-}
-
-int
-tas_stereo_mixers(void)
-{
-	CALL0(stereo_mixers);
-}
-
-int
-tas_output_device_change(int device_id,int layout_id,int speaker_id)
-{
-	CALL(output_device_change,device_id,layout_id,speaker_id);
-}
-
-int
-tas_device_ioctl(u_int cmd, u_long arg)
-{
-	CALL(device_ioctl,cmd,arg);
-}
-
-int
-tas_post_init(void)
-{
-	CALL0(post_init);
-}
-
-static int
-tas_detect_client(struct i2c_adapter *adapter, int address)
-{
-	static const char *client_name = "tas Digital Equalizer";
-	struct i2c_client *new_client;
-	int rc = -ENODEV;
-
-	if (!driver_hooks) {
-		printk(KERN_ERR "tas_detect_client called with no hooks !\n");
-		return -ENODEV;
-	}
-	
-	new_client = kzalloc(sizeof(*new_client), GFP_KERNEL);
-	if (!new_client)
-		return -ENOMEM;
-
-	new_client->addr = address;
-	new_client->adapter = adapter;
-	new_client->driver = &tas_driver;
-	strlcpy(new_client->name, client_name, DEVICE_NAME_SIZE);
-
-        if (driver_hooks->init(new_client))
-		goto bail;
-
-	/* Tell the i2c layer a new client has arrived */
-	if (i2c_attach_client(new_client)) {
-		driver_hooks->uninit(dev_get_drvdata(&new_client->dev));
-		goto bail;
-	}
-
-	tas_client = new_client;
-	return 0;
- bail:
-	tas_client = NULL;
-	kfree(new_client);
-	return rc;
-}
-
-static int
-tas_attach_adapter(struct i2c_adapter *adapter)
-{
-	if (!strncmp(adapter->name, "mac-io", 6))
-		return tas_detect_client(adapter, tas_i2c_address);
-	return 0;
-}
-
-static int
-tas_detach_client(struct i2c_client *client)
-{
-	if (client == tas_client) {
-		driver_hooks->uninit(dev_get_drvdata(&client->dev));
-
-		i2c_detach_client(client);
-		kfree(client);
-	}
-	return 0;
-}
-
-void
-tas_cleanup(void)
-{
-	i2c_del_driver(&tas_driver);
-}
-
-int __init
-tas_init(int driver_id, const char *driver_name)
-{
-	const u32* paddr;
-	struct device_node *tas_node;
-
-	printk(KERN_INFO "tas driver [%s])\n", driver_name);
-
-#ifndef CONFIG_I2C_POWERMAC
-	request_module("i2c-powermac");
-#endif
-	tas_node = of_find_node_by_name("deq");
-	if (tas_node == NULL)
-		return -ENODEV;
-	paddr = of_get_property(tas_node, "i2c-address", NULL);
-	if (paddr) {
-		tas_i2c_address = (*paddr) >> 1;
-		printk(KERN_INFO "using i2c address: 0x%x from device-tree\n",
-				tas_i2c_address);
-	} else    
-		printk(KERN_INFO "using i2c address: 0x%x (default)\n",
-				tas_i2c_address);
-	of_node_put(tas_node);
-
-	return i2c_add_driver(&tas_driver);
-}
diff --git a/sound/oss/dmasound/tas_common.h b/sound/oss/dmasound/tas_common.h
deleted file mode 100644
index 0741c28..0000000
--- a/sound/oss/dmasound/tas_common.h
+++ /dev/null
@@ -1,284 +0,0 @@
-#ifndef _TAS_COMMON_H_
-#define _TAS_COMMON_H_
-
-#include <linux/i2c.h>
-#include <linux/soundcard.h>
-#include <asm/string.h>
-
-#define I2C_DRIVERID_TAS_BASE   (0xFEBA)
-
-#define SET_4_20(shadow, offset, val)                        \
-	do {                                                 \
-		(shadow)[(offset)+0] = ((val) >> 16) & 0xff; \
-		(shadow)[(offset)+1] = ((val) >> 8)  & 0xff; \
-		(shadow)[(offset)+2] = ((val) >> 0)  & 0xff; \
-	} while (0)
-
-#define GET_4_20(shadow, offset)                             \
-	(((u_int)((shadow)[(offset)+0]) << 16) |             \
-	 ((u_int)((shadow)[(offset)+1]) <<  8) |             \
-	 ((u_int)((shadow)[(offset)+2]) <<  0))
-
-
-#define TAS_BIQUAD_FAST_LOAD 0x01
-
-#define TAS_DRCE_ENABLE           0x01
-#define TAS_DRCE_ABOVE_RATIO      0x02
-#define TAS_DRCE_BELOW_RATIO      0x04
-#define TAS_DRCE_THRESHOLD        0x08
-#define TAS_DRCE_ENERGY           0x10
-#define TAS_DRCE_ATTACK           0x20
-#define TAS_DRCE_DECAY            0x40
-
-#define TAS_DRCE_ALL              0x7f
-
-
-#define TAS_OUTPUT_HEADPHONES     0x00
-#define TAS_OUTPUT_INTERNAL_SPKR  0x01
-#define TAS_OUTPUT_EXTERNAL_SPKR  0x02
-
-
-union tas_biquad_t {
-	struct {
-		int b0,b1,b2,a1,a2;
-	} coeff;
-	int buf[5];
-};
-
-struct tas_biquad_ctrl_t {
-	u_int channel:4;
-	u_int filter:4;
-
-	union tas_biquad_t data;
-};
-
-struct tas_biquad_ctrl_list_t {
-	int flags;
-	int filter_count;
-	struct tas_biquad_ctrl_t biquads[0];
-};
-
-struct tas_ratio_t {
-	unsigned short val;    /* 8.8                        */
-	unsigned short expand; /* 0 = compress, !0 = expand. */
-};
-
-struct tas_drce_t {
-	unsigned short enable;
-	struct tas_ratio_t above;
-	struct tas_ratio_t below;
-	short threshold;       /* dB,       8.8 signed    */
-	unsigned short energy; /* seconds,  4.12 unsigned */
-	unsigned short attack; /* seconds,  4.12 unsigned */
-	unsigned short decay;  /* seconds,  4.12 unsigned */
-};
-
-struct tas_drce_ctrl_t {
-	uint flags;
-
-	struct tas_drce_t data;
-};
-
-struct tas_gain_t
-{
-  unsigned int *master;
-  unsigned int *treble;
-  unsigned int *bass;
-  unsigned int *mixer;
-};
-
-typedef char tas_shadow_t[0x45];
-
-struct tas_data_t
-{
-	struct i2c_client *client;
-	tas_shadow_t *shadow;
-	uint mixer[SOUND_MIXER_NRDEVICES];
-};
-
-typedef int (*tas_hook_init_t)(struct i2c_client *);
-typedef int (*tas_hook_post_init_t)(struct tas_data_t *);
-typedef void (*tas_hook_uninit_t)(struct tas_data_t *);
-
-typedef int (*tas_hook_get_mixer_level_t)(struct tas_data_t *,int,uint *);
-typedef int (*tas_hook_set_mixer_level_t)(struct tas_data_t *,int,uint);
-
-typedef int (*tas_hook_enter_sleep_t)(struct tas_data_t *);
-typedef int (*tas_hook_leave_sleep_t)(struct tas_data_t *);
-
-typedef int (*tas_hook_supported_mixers_t)(struct tas_data_t *);
-typedef int (*tas_hook_mixer_is_stereo_t)(struct tas_data_t *,int);
-typedef int (*tas_hook_stereo_mixers_t)(struct tas_data_t *);
-
-typedef int (*tas_hook_output_device_change_t)(struct tas_data_t *,int,int,int);
-typedef int (*tas_hook_device_ioctl_t)(struct tas_data_t *,u_int,u_long);
-
-struct tas_driver_hooks_t {
-	/*
-	 * All hardware initialisation must be performed in
-	 * post_init(), as tas_dmasound_init() does a hardware reset.
-	 *
-	 * init() is called before tas_dmasound_init() so that
-	 * ouput_device_change() is always called after i2c driver
-	 * initialisation. The implication is that
-	 * output_device_change() must cope with the fact that it
-	 * may be called before post_init().
-	 */
-
-	tas_hook_init_t                   init;
-	tas_hook_post_init_t              post_init;
-	tas_hook_uninit_t                 uninit;
-
-	tas_hook_get_mixer_level_t        get_mixer_level;
-	tas_hook_set_mixer_level_t        set_mixer_level;
-
-	tas_hook_enter_sleep_t            enter_sleep;
-	tas_hook_leave_sleep_t            leave_sleep;
-
-	tas_hook_supported_mixers_t       supported_mixers;
-	tas_hook_mixer_is_stereo_t        mixer_is_stereo;
-	tas_hook_stereo_mixers_t          stereo_mixers;
-
-	tas_hook_output_device_change_t   output_device_change;
-	tas_hook_device_ioctl_t           device_ioctl;
-};
-
-enum tas_write_mode_t {
-	WRITE_HW     = 0x01,
-	WRITE_SHADOW = 0x02,
-	WRITE_NORMAL = 0x03,
-	FORCE_WRITE  = 0x04
-};
-
-static inline uint
-tas_mono_to_stereo(uint mono)
-{
-	mono &=0xff;
-	return mono | (mono<<8);
-}
-
-/*
- * Todo: make these functions a bit more efficient !
- */
-static inline int
-tas_write_register(	struct tas_data_t *self,
-			uint reg_num,
-			uint reg_width,
-			char *data,
-			uint write_mode)
-{
-	int rc;
-
-	if (reg_width==0 || data==NULL || self==NULL)
-		return -EINVAL;
-	if (!(write_mode & FORCE_WRITE) &&
-	    !memcmp(data,self->shadow[reg_num],reg_width))
-	    	return 0;
-
-	if (write_mode & WRITE_SHADOW)
-		memcpy(self->shadow[reg_num],data,reg_width);
-	if (write_mode & WRITE_HW) {
-		rc=i2c_smbus_write_i2c_block_data(self->client,
-						  reg_num,
-						  reg_width,
-						  data);
-		if (rc < 0) {
-			printk("tas: I2C block write failed \n");  
-			return rc; 
-		}
-	}
-	return 0;
-}
-
-static inline int
-tas_sync_register(	struct tas_data_t *self,
-			uint reg_num,
-			uint reg_width)
-{
-	int rc;
-
-	if (reg_width==0 || self==NULL)
-		return -EINVAL;
-	rc=i2c_smbus_write_i2c_block_data(self->client,
-					  reg_num,
-					  reg_width,
-					  self->shadow[reg_num]);
-	if (rc < 0) {
-		printk("tas: I2C block write failed \n");
-		return rc;
-	}
-	return 0;
-}
-
-static inline int
-tas_write_byte_register(	struct tas_data_t *self,
-				uint reg_num,
-				char data,
-				uint write_mode)
-{
-	if (self==NULL)
-		return -1;
-	if (!(write_mode & FORCE_WRITE) && data != self->shadow[reg_num][0])
-		return 0;
-	if (write_mode & WRITE_SHADOW)
-		self->shadow[reg_num][0]=data;
-	if (write_mode & WRITE_HW) {
-		if (i2c_smbus_write_byte_data(self->client, reg_num, data) < 0) {
-			printk("tas: I2C byte write failed \n");  
-			return -1; 
-		}
-	}
-	return 0;
-}
-
-static inline int
-tas_sync_byte_register(	struct tas_data_t *self,
-			uint reg_num,
-			uint reg_width)
-{
-	if (reg_width==0 || self==NULL)
-		return -1;
-	if (i2c_smbus_write_byte_data(
-	    self->client, reg_num, self->shadow[reg_num][0]) < 0) {
-		printk("tas: I2C byte write failed \n");
-		return -1;
-	}
-	return 0;
-}
-
-static inline int
-tas_read_register(	struct tas_data_t *self,
-			uint reg_num,
-			uint reg_width,
-			char *data)
-{
-	if (reg_width==0 || data==NULL || self==NULL)
-		return -1;
-	memcpy(data,self->shadow[reg_num],reg_width);
-	return 0;
-}
-
-extern int tas_register_driver(struct tas_driver_hooks_t *hooks);
-
-extern int tas_get_mixer_level(int mixer,uint *level);
-extern int tas_set_mixer_level(int mixer,uint level);
-extern int tas_enter_sleep(void);
-extern int tas_leave_sleep(void);
-extern int tas_supported_mixers(void);
-extern int tas_mixer_is_stereo(int mixer);
-extern int tas_stereo_mixers(void);
-extern int tas_output_device_change(int,int,int);
-extern int tas_device_ioctl(u_int, u_long);
-
-extern void tas_cleanup(void);
-extern int tas_init(int driver_id,const char *driver_name);
-extern int tas_post_init(void);
-
-#endif /* _TAS_COMMON_H_ */
-/*
- * Local Variables:
- * tab-width: 8
- * indent-tabs-mode: t
- * c-basic-offset: 8
- * End:
- */
diff --git a/sound/oss/dmasound/tas_eq_prefs.h b/sound/oss/dmasound/tas_eq_prefs.h
deleted file mode 100644
index 3a994ed..0000000
--- a/sound/oss/dmasound/tas_eq_prefs.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef _TAS_EQ_PREFS_H_
-#define _TAS_EQ_PREFS_H_
-
-struct tas_eq_pref_t {
-	u_int sample_rate;
-	u_int device_id;
-	u_int output_id;
-	u_int speaker_id;
-
-	struct tas_drce_t *drce;
-
-	u_int filter_count;
-	struct tas_biquad_ctrl_t *biquads;
-};
-
-#endif /* _TAS_EQ_PREFS_H_ */
-
-/*
- * Local Variables:
- * tab-width: 8
- * indent-tabs-mode: t
- * c-basic-offset: 8
- * End:
- */
diff --git a/sound/oss/dmasound/tas_ioctl.h b/sound/oss/dmasound/tas_ioctl.h
deleted file mode 100644
index 9d12b37..0000000
--- a/sound/oss/dmasound/tas_ioctl.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#ifndef _TAS_IOCTL_H_
-#define _TAS_IOCTL_H_
-
-#include <linux/soundcard.h>
-
-
-#define TAS_READ_EQ              _SIOR('t',0,struct tas_biquad_ctrl_t)
-#define TAS_WRITE_EQ             _SIOW('t',0,struct tas_biquad_ctrl_t)
-
-#define TAS_READ_EQ_LIST         _SIOR('t',1,struct tas_biquad_ctrl_t)
-#define TAS_WRITE_EQ_LIST        _SIOW('t',1,struct tas_biquad_ctrl_t)
-
-#define TAS_READ_EQ_FILTER_COUNT  _SIOR('t',2,int)
-#define TAS_READ_EQ_CHANNEL_COUNT _SIOR('t',3,int)
-
-#define TAS_READ_DRCE            _SIOR('t',4,struct tas_drce_ctrl_t)
-#define TAS_WRITE_DRCE           _SIOW('t',4,struct tas_drce_ctrl_t)
-
-#define TAS_READ_DRCE_CAPS       _SIOR('t',5,int)
-#define TAS_READ_DRCE_MIN        _SIOR('t',6,int)
-#define TAS_READ_DRCE_MAX        _SIOR('t',7,int)
-
-#endif
diff --git a/sound/oss/dmasound/trans_16.c b/sound/oss/dmasound/trans_16.c
deleted file mode 100644
index ca973ac..0000000
--- a/sound/oss/dmasound/trans_16.c
+++ /dev/null
@@ -1,898 +0,0 @@
-/*
- *  linux/sound/oss/dmasound/trans_16.c
- *
- *  16 bit translation routines.  Only used by Power mac at present.
- *
- *  See linux/sound/oss/dmasound/dmasound_core.c for copyright and
- *  history prior to 08/02/2001.
- *
- *  08/02/2001 Iain Sandoe
- *		split from dmasound_awacs.c
- *  11/29/2003 Renzo Davoli (King Enzo)
- *  	- input resampling (for soft rate < hard rate)
- *  	- software line in gain control
- */
-
-#include <linux/soundcard.h>
-#include <asm/uaccess.h>
-#include "dmasound.h"
-
-extern int expand_bal;	/* Balance factor for expanding (not volume!) */
-static short dmasound_alaw2dma16[] ;
-static short dmasound_ulaw2dma16[] ;
-
-static ssize_t pmac_ct_law(const u_char __user *userPtr, size_t userCount,
-			   u_char frame[], ssize_t *frameUsed,
-			   ssize_t frameLeft);
-static ssize_t pmac_ct_s8(const u_char __user *userPtr, size_t userCount,
-			  u_char frame[], ssize_t *frameUsed,
-			  ssize_t frameLeft);
-static ssize_t pmac_ct_u8(const u_char __user *userPtr, size_t userCount,
-			  u_char frame[], ssize_t *frameUsed,
-			  ssize_t frameLeft);
-static ssize_t pmac_ct_s16(const u_char __user *userPtr, size_t userCount,
-			   u_char frame[], ssize_t *frameUsed,
-			   ssize_t frameLeft);
-static ssize_t pmac_ct_u16(const u_char __user *userPtr, size_t userCount,
-			   u_char frame[], ssize_t *frameUsed,
-			   ssize_t frameLeft);
-
-static ssize_t pmac_ctx_law(const u_char __user *userPtr, size_t userCount,
-			    u_char frame[], ssize_t *frameUsed,
-			    ssize_t frameLeft);
-static ssize_t pmac_ctx_s8(const u_char __user *userPtr, size_t userCount,
-			   u_char frame[], ssize_t *frameUsed,
-			   ssize_t frameLeft);
-static ssize_t pmac_ctx_u8(const u_char __user *userPtr, size_t userCount,
-			   u_char frame[], ssize_t *frameUsed,
-			   ssize_t frameLeft);
-static ssize_t pmac_ctx_s16(const u_char __user *userPtr, size_t userCount,
-			    u_char frame[], ssize_t *frameUsed,
-			    ssize_t frameLeft);
-static ssize_t pmac_ctx_u16(const u_char __user *userPtr, size_t userCount,
-			    u_char frame[], ssize_t *frameUsed,
-			    ssize_t frameLeft);
-
-static ssize_t pmac_ct_s16_read(const u_char __user *userPtr, size_t userCount,
-			   u_char frame[], ssize_t *frameUsed,
-			   ssize_t frameLeft);
-static ssize_t pmac_ct_u16_read(const u_char __user *userPtr, size_t userCount,
-			   u_char frame[], ssize_t *frameUsed,
-			   ssize_t frameLeft);
-
-/*** Translations ************************************************************/
-
-static int expand_data;	/* Data for expanding */
-
-static ssize_t pmac_ct_law(const u_char __user *userPtr, size_t userCount,
-			   u_char frame[], ssize_t *frameUsed,
-			   ssize_t frameLeft)
-{
-	short *table = dmasound.soft.format == AFMT_MU_LAW
-		? dmasound_ulaw2dma16 : dmasound_alaw2dma16;
-	ssize_t count, used;
-	short *p = (short *) &frame[*frameUsed];
-	int val, stereo = dmasound.soft.stereo;
-
-	frameLeft >>= 2;
-	if (stereo)
-		userCount >>= 1;
-	used = count = min_t(unsigned long, userCount, frameLeft);
-	while (count > 0) {
-		u_char data;
-		if (get_user(data, userPtr++))
-			return -EFAULT;
-		val = table[data];
-		*p++ = val;
-		if (stereo) {
-			if (get_user(data, userPtr++))
-				return -EFAULT;
-			val = table[data];
-		}
-		*p++ = val;
-		count--;
-	}
-	*frameUsed += used * 4;
-	return stereo? used * 2: used;
-}
-
-
-static ssize_t pmac_ct_s8(const u_char __user *userPtr, size_t userCount,
-			  u_char frame[], ssize_t *frameUsed,
-			  ssize_t frameLeft)
-{
-	ssize_t count, used;
-	short *p = (short *) &frame[*frameUsed];
-	int val, stereo = dmasound.soft.stereo;
-
-	frameLeft >>= 2;
-	if (stereo)
-		userCount >>= 1;
-	used = count = min_t(unsigned long, userCount, frameLeft);
-	while (count > 0) {
-		u_char data;
-		if (get_user(data, userPtr++))
-			return -EFAULT;
-		val = data << 8;
-		*p++ = val;
-		if (stereo) {
-			if (get_user(data, userPtr++))
-				return -EFAULT;
-			val = data << 8;
-		}
-		*p++ = val;
-		count--;
-	}
-	*frameUsed += used * 4;
-	return stereo? used * 2: used;
-}
-
-
-static ssize_t pmac_ct_u8(const u_char __user *userPtr, size_t userCount,
-			  u_char frame[], ssize_t *frameUsed,
-			  ssize_t frameLeft)
-{
-	ssize_t count, used;
-	short *p = (short *) &frame[*frameUsed];
-	int val, stereo = dmasound.soft.stereo;
-
-	frameLeft >>= 2;
-	if (stereo)
-		userCount >>= 1;
-	used = count = min_t(unsigned long, userCount, frameLeft);
-	while (count > 0) {
-		u_char data;
-		if (get_user(data, userPtr++))
-			return -EFAULT;
-		val = (data ^ 0x80) << 8;
-		*p++ = val;
-		if (stereo) {
-			if (get_user(data, userPtr++))
-				return -EFAULT;
-			val = (data ^ 0x80) << 8;
-		}
-		*p++ = val;
-		count--;
-	}
-	*frameUsed += used * 4;
-	return stereo? used * 2: used;
-}
-
-
-static ssize_t pmac_ct_s16(const u_char __user *userPtr, size_t userCount,
-			   u_char frame[], ssize_t *frameUsed,
-			   ssize_t frameLeft)
-{
-	ssize_t count, used;
-	int stereo = dmasound.soft.stereo;
-	short *fp = (short *) &frame[*frameUsed];
-
-	frameLeft >>= 2;
-	userCount >>= (stereo? 2: 1);
-	used = count = min_t(unsigned long, userCount, frameLeft);
-	if (!stereo) {
-		short __user *up = (short __user *) userPtr;
-		while (count > 0) {
-			short data;
-			if (get_user(data, up++))
-				return -EFAULT;
-			*fp++ = data;
-			*fp++ = data;
-			count--;
-		}
-	} else {
-		if (copy_from_user(fp, userPtr, count * 4))
-			return -EFAULT;
-	}
-	*frameUsed += used * 4;
-	return stereo? used * 4: used * 2;
-}
-
-static ssize_t pmac_ct_u16(const u_char __user *userPtr, size_t userCount,
-			   u_char frame[], ssize_t *frameUsed,
-			   ssize_t frameLeft)
-{
-	ssize_t count, used;
-	int mask = (dmasound.soft.format == AFMT_U16_LE? 0x0080: 0x8000);
-	int stereo = dmasound.soft.stereo;
-	short *fp = (short *) &frame[*frameUsed];
-	short __user *up = (short __user *) userPtr;
-
-	frameLeft >>= 2;
-	userCount >>= (stereo? 2: 1);
-	used = count = min_t(unsigned long, userCount, frameLeft);
-	while (count > 0) {
-		short data;
-		if (get_user(data, up++))
-			return -EFAULT;
-		data ^= mask;
-		*fp++ = data;
-		if (stereo) {
-			if (get_user(data, up++))
-				return -EFAULT;
-			data ^= mask;
-		}
-		*fp++ = data;
-		count--;
-	}
-	*frameUsed += used * 4;
-	return stereo? used * 4: used * 2;
-}
-
-
-static ssize_t pmac_ctx_law(const u_char __user *userPtr, size_t userCount,
-			    u_char frame[], ssize_t *frameUsed,
-			    ssize_t frameLeft)
-{
-	unsigned short *table = (unsigned short *)
-		(dmasound.soft.format == AFMT_MU_LAW
-		 ? dmasound_ulaw2dma16 : dmasound_alaw2dma16);
-	unsigned int data = expand_data;
-	unsigned int *p = (unsigned int *) &frame[*frameUsed];
-	int bal = expand_bal;
-	int hSpeed = dmasound.hard.speed, sSpeed = dmasound.soft.speed;
-	int utotal, ftotal;
-	int stereo = dmasound.soft.stereo;
-
-	frameLeft >>= 2;
-	if (stereo)
-		userCount >>= 1;
-	ftotal = frameLeft;
-	utotal = userCount;
-	while (frameLeft) {
-		u_char c;
-		if (bal < 0) {
-			if (userCount == 0)
-				break;
-			if (get_user(c, userPtr++))
-				return -EFAULT;
-			data = table[c];
-			if (stereo) {
-				if (get_user(c, userPtr++))
-					return -EFAULT;
-				data = (data << 16) + table[c];
-			} else
-				data = (data << 16) + data;
-			userCount--;
-			bal += hSpeed;
-		}
-		*p++ = data;
-		frameLeft--;
-		bal -= sSpeed;
-	}
-	expand_bal = bal;
-	expand_data = data;
-	*frameUsed += (ftotal - frameLeft) * 4;
-	utotal -= userCount;
-	return stereo? utotal * 2: utotal;
-}
-
-static ssize_t pmac_ctx_s8(const u_char __user *userPtr, size_t userCount,
-			   u_char frame[], ssize_t *frameUsed,
-			   ssize_t frameLeft)
-{
-	unsigned int *p = (unsigned int *) &frame[*frameUsed];
-	unsigned int data = expand_data;
-	int bal = expand_bal;
-	int hSpeed = dmasound.hard.speed, sSpeed = dmasound.soft.speed;
-	int stereo = dmasound.soft.stereo;
-	int utotal, ftotal;
-
-	frameLeft >>= 2;
-	if (stereo)
-		userCount >>= 1;
-	ftotal = frameLeft;
-	utotal = userCount;
-	while (frameLeft) {
-		u_char c;
-		if (bal < 0) {
-			if (userCount == 0)
-				break;
-			if (get_user(c, userPtr++))
-				return -EFAULT;
-			data = c << 8;
-			if (stereo) {
-				if (get_user(c, userPtr++))
-					return -EFAULT;
-				data = (data << 16) + (c << 8);
-			} else
-				data = (data << 16) + data;
-			userCount--;
-			bal += hSpeed;
-		}
-		*p++ = data;
-		frameLeft--;
-		bal -= sSpeed;
-	}
-	expand_bal = bal;
-	expand_data = data;
-	*frameUsed += (ftotal - frameLeft) * 4;
-	utotal -= userCount;
-	return stereo? utotal * 2: utotal;
-}
-
-
-static ssize_t pmac_ctx_u8(const u_char __user *userPtr, size_t userCount,
-			   u_char frame[], ssize_t *frameUsed,
-			   ssize_t frameLeft)
-{
-	unsigned int *p = (unsigned int *) &frame[*frameUsed];
-	unsigned int data = expand_data;
-	int bal = expand_bal;
-	int hSpeed = dmasound.hard.speed, sSpeed = dmasound.soft.speed;
-	int stereo = dmasound.soft.stereo;
-	int utotal, ftotal;
-
-	frameLeft >>= 2;
-	if (stereo)
-		userCount >>= 1;
-	ftotal = frameLeft;
-	utotal = userCount;
-	while (frameLeft) {
-		u_char c;
-		if (bal < 0) {
-			if (userCount == 0)
-				break;
-			if (get_user(c, userPtr++))
-				return -EFAULT;
-			data = (c ^ 0x80) << 8;
-			if (stereo) {
-				if (get_user(c, userPtr++))
-					return -EFAULT;
-				data = (data << 16) + ((c ^ 0x80) << 8);
-			} else
-				data = (data << 16) + data;
-			userCount--;
-			bal += hSpeed;
-		}
-		*p++ = data;
-		frameLeft--;
-		bal -= sSpeed;
-	}
-	expand_bal = bal;
-	expand_data = data;
-	*frameUsed += (ftotal - frameLeft) * 4;
-	utotal -= userCount;
-	return stereo? utotal * 2: utotal;
-}
-
-
-static ssize_t pmac_ctx_s16(const u_char __user *userPtr, size_t userCount,
-			    u_char frame[], ssize_t *frameUsed,
-			    ssize_t frameLeft)
-{
-	unsigned int *p = (unsigned int *) &frame[*frameUsed];
-	unsigned int data = expand_data;
-	unsigned short __user *up = (unsigned short __user *) userPtr;
-	int bal = expand_bal;
-	int hSpeed = dmasound.hard.speed, sSpeed = dmasound.soft.speed;
-	int stereo = dmasound.soft.stereo;
-	int utotal, ftotal;
-
-	frameLeft >>= 2;
-	userCount >>= (stereo? 2: 1);
-	ftotal = frameLeft;
-	utotal = userCount;
-	while (frameLeft) {
-		unsigned short c;
-		if (bal < 0) {
-			if (userCount == 0)
-				break;
-			if (get_user(data, up++))
-				return -EFAULT;
-			if (stereo) {
-				if (get_user(c, up++))
-					return -EFAULT;
-				data = (data << 16) + c;
-			} else
-				data = (data << 16) + data;
-			userCount--;
-			bal += hSpeed;
-		}
-		*p++ = data;
-		frameLeft--;
-		bal -= sSpeed;
-	}
-	expand_bal = bal;
-	expand_data = data;
-	*frameUsed += (ftotal - frameLeft) * 4;
-	utotal -= userCount;
-	return stereo? utotal * 4: utotal * 2;
-}
-
-
-static ssize_t pmac_ctx_u16(const u_char __user *userPtr, size_t userCount,
-			    u_char frame[], ssize_t *frameUsed,
-			    ssize_t frameLeft)
-{
-	int mask = (dmasound.soft.format == AFMT_U16_LE? 0x0080: 0x8000);
-	unsigned int *p = (unsigned int *) &frame[*frameUsed];
-	unsigned int data = expand_data;
-	unsigned short __user *up = (unsigned short __user *) userPtr;
-	int bal = expand_bal;
-	int hSpeed = dmasound.hard.speed, sSpeed = dmasound.soft.speed;
-	int stereo = dmasound.soft.stereo;
-	int utotal, ftotal;
-
-	frameLeft >>= 2;
-	userCount >>= (stereo? 2: 1);
-	ftotal = frameLeft;
-	utotal = userCount;
-	while (frameLeft) {
-		unsigned short c;
-		if (bal < 0) {
-			if (userCount == 0)
-				break;
-			if (get_user(data, up++))
-				return -EFAULT;
-			data ^= mask;
-			if (stereo) {
-				if (get_user(c, up++))
-					return -EFAULT;
-				data = (data << 16) + (c ^ mask);
-			} else
-				data = (data << 16) + data;
-			userCount--;
-			bal += hSpeed;
-		}
-		*p++ = data;
-		frameLeft--;
-		bal -= sSpeed;
-	}
-	expand_bal = bal;
-	expand_data = data;
-	*frameUsed += (ftotal - frameLeft) * 4;
-	utotal -= userCount;
-	return stereo? utotal * 4: utotal * 2;
-}
-
-/* data in routines... */
-
-static ssize_t pmac_ct_s8_read(const u_char __user *userPtr, size_t userCount,
-			  u_char frame[], ssize_t *frameUsed,
-			  ssize_t frameLeft)
-{
-	ssize_t count, used;
-	short *p = (short *) &frame[*frameUsed];
-	int val, stereo = dmasound.soft.stereo;
-
-	frameLeft >>= 2;
-	if (stereo)
-		userCount >>= 1;
-	used = count = min_t(unsigned long, userCount, frameLeft);
-	while (count > 0) {
-		u_char data;
-
-		val = *p++;
-		val = (val * software_input_volume) >> 7;
-		data = val >> 8;
-		if (put_user(data, (u_char __user *)userPtr++))
-			return -EFAULT;
-		if (stereo) {
-			val = *p;
-			val = (val * software_input_volume) >> 7;
-			data = val >> 8;
-			if (put_user(data, (u_char __user *)userPtr++))
-				return -EFAULT;
-		}
-		p++;
-		count--;
-	}
-	*frameUsed += used * 4;
-	return stereo? used * 2: used;
-}
-
-
-static ssize_t pmac_ct_u8_read(const u_char __user *userPtr, size_t userCount,
-			  u_char frame[], ssize_t *frameUsed,
-			  ssize_t frameLeft)
-{
-	ssize_t count, used;
-	short *p = (short *) &frame[*frameUsed];
-	int val, stereo = dmasound.soft.stereo;
-
-	frameLeft >>= 2;
-	if (stereo)
-		userCount >>= 1;
-	used = count = min_t(unsigned long, userCount, frameLeft);
-	while (count > 0) {
-		u_char data;
-
-		val = *p++;
-		val = (val * software_input_volume) >> 7;
-		data = (val >> 8) ^ 0x80;
-		if (put_user(data, (u_char __user *)userPtr++))
-			return -EFAULT;
-		if (stereo) {
-			val = *p;
-			val = (val * software_input_volume) >> 7;
-			data = (val >> 8) ^ 0x80;
-			if (put_user(data, (u_char __user *)userPtr++))
-				return -EFAULT;
-		}
-		p++;
-		count--;
-	}
-	*frameUsed += used * 4;
-	return stereo? used * 2: used;
-}
-
-static ssize_t pmac_ct_s16_read(const u_char __user *userPtr, size_t userCount,
-			   u_char frame[], ssize_t *frameUsed,
-			   ssize_t frameLeft)
-{
-	ssize_t count, used;
-	int stereo = dmasound.soft.stereo;
-	short *fp = (short *) &frame[*frameUsed];
-	short __user *up = (short __user *) userPtr;
-
-	frameLeft >>= 2;
-	userCount >>= (stereo? 2: 1);
-	used = count = min_t(unsigned long, userCount, frameLeft);
-	while (count > 0) {
-		short data;
-
-		data = *fp++;
-		data = (data * software_input_volume) >> 7;
-		if (put_user(data, up++))
-			return -EFAULT;
-		if (stereo) {
-			data = *fp;
-			data = (data * software_input_volume) >> 7;
-			if (put_user(data, up++))
-				return -EFAULT;
-		}
-		fp++;
-		count--;
- 	}
-	*frameUsed += used * 4;
-	return stereo? used * 4: used * 2;
-}
-
-static ssize_t pmac_ct_u16_read(const u_char __user *userPtr, size_t userCount,
-			   u_char frame[], ssize_t *frameUsed,
-			   ssize_t frameLeft)
-{
-	ssize_t count, used;
-	int mask = (dmasound.soft.format == AFMT_U16_LE? 0x0080: 0x8000);
-	int stereo = dmasound.soft.stereo;
-	short *fp = (short *) &frame[*frameUsed];
-	short __user *up = (short __user *) userPtr;
-
-	frameLeft >>= 2;
-	userCount >>= (stereo? 2: 1);
-	used = count = min_t(unsigned long, userCount, frameLeft);
-	while (count > 0) {
-		int data;
-
-		data = *fp++;
-		data = (data * software_input_volume) >> 7;
-		data ^= mask;
-		if (put_user(data, up++))
-			return -EFAULT;
-		if (stereo) {
-			data = *fp;
-			data = (data * software_input_volume) >> 7;
-			data ^= mask;
-			if (put_user(data, up++))
-				return -EFAULT;
-		}
-		fp++;
-		count--;
-	}
-	*frameUsed += used * 4;
-	return stereo? used * 4: used * 2;
-}
-
-/* data in routines (reducing speed)... */
-
-static ssize_t pmac_ctx_s8_read(const u_char __user *userPtr, size_t userCount,
-			  u_char frame[], ssize_t *frameUsed,
-			  ssize_t frameLeft)
-{
-	short *p = (short *) &frame[*frameUsed];
-	int bal = expand_read_bal;
-	int vall,valr, stereo = dmasound.soft.stereo;
-	int hSpeed = dmasound.hard.speed, sSpeed = dmasound.soft.speed;
-	int utotal, ftotal;
-
-	frameLeft >>= 2;
-	if (stereo)
-		userCount >>= 1;
-	ftotal = frameLeft;
-	utotal = userCount;
-	while (frameLeft) {
-		u_char data;
-
-		if (bal<0 && userCount == 0)
-			break;
-		vall = *p++;
-		vall = (vall * software_input_volume) >> 7;
-		if (stereo) {
-			valr = *p;
-			valr = (valr * software_input_volume) >> 7;
-		}
-		p++;
-		if (bal < 0) {
-			data = vall >> 8;
-			if (put_user(data, (u_char __user *)userPtr++))
-				return -EFAULT;
-			if (stereo) {
-				data = valr >> 8;
-				if (put_user(data, (u_char __user *)userPtr++))
-					return -EFAULT;
-			}
-			userCount--;
-			bal += hSpeed;
-		}
-		frameLeft--;
-		bal -= sSpeed;
-	}
-	expand_read_bal=bal;
-	*frameUsed += (ftotal - frameLeft) * 4;
-	utotal -= userCount;
-	return stereo? utotal * 2: utotal;
-}
-
-
-static ssize_t pmac_ctx_u8_read(const u_char __user *userPtr, size_t userCount,
-			  u_char frame[], ssize_t *frameUsed,
-			  ssize_t frameLeft)
-{
-	short *p = (short *) &frame[*frameUsed];
-	int bal = expand_read_bal;
-	int vall,valr, stereo = dmasound.soft.stereo;
-	int hSpeed = dmasound.hard.speed, sSpeed = dmasound.soft.speed;
-	int utotal, ftotal;
-
-	frameLeft >>= 2;
-	if (stereo)
-		userCount >>= 1;
-	ftotal = frameLeft;
-	utotal = userCount;
-	while (frameLeft) {
-		u_char data;
-
-		if (bal<0 && userCount == 0)
-			break;
-
-		vall = *p++;
-		vall = (vall * software_input_volume) >> 7;
-		if (stereo) {
-			valr = *p;
-			valr = (valr * software_input_volume) >> 7;
-		}
-		p++;
-		if (bal < 0) {
-			data = (vall >> 8) ^ 0x80;
-			if (put_user(data, (u_char __user *)userPtr++))
-				return -EFAULT;
-			if (stereo) {
-				data = (valr >> 8) ^ 0x80;
-				if (put_user(data, (u_char __user *)userPtr++))
-					return -EFAULT;
-			}
-			userCount--;
-			bal += hSpeed;
-		}
-		frameLeft--;
-		bal -= sSpeed;
-	}
-	expand_read_bal=bal;
-	*frameUsed += (ftotal - frameLeft) * 4;
-	utotal -= userCount;
-	return stereo? utotal * 2: utotal;
-}
-
-static ssize_t pmac_ctx_s16_read(const u_char __user *userPtr, size_t userCount,
-			   u_char frame[], ssize_t *frameUsed,
-			   ssize_t frameLeft)
-{
-	int bal = expand_read_bal;
-	short *fp = (short *) &frame[*frameUsed];
-	short __user *up = (short __user *) userPtr;
-	int stereo = dmasound.soft.stereo;
-	int hSpeed = dmasound.hard.speed, sSpeed = dmasound.soft.speed;
-	int utotal, ftotal;
-
-	frameLeft >>= 2;
-	userCount >>= (stereo? 2: 1);
-	ftotal = frameLeft;
-	utotal = userCount;
-	while (frameLeft) {
-		int datal,datar;
-
-		if (bal<0 && userCount == 0)
-			break;
-
-		datal = *fp++;
-		datal = (datal * software_input_volume) >> 7;
-		if (stereo) {
-			datar = *fp;
-			datar = (datar * software_input_volume) >> 7;
-		}
-		fp++;
-		if (bal < 0) {
-			if (put_user(datal, up++))
-				return -EFAULT;
-			if (stereo) {
-				if (put_user(datar, up++))
-					return -EFAULT;
-			}
-			userCount--;
-			bal += hSpeed;
-		}
-		frameLeft--;
-		bal -= sSpeed;
-	}
-	expand_read_bal=bal;
-	*frameUsed += (ftotal - frameLeft) * 4;
-	utotal -= userCount;
-	return stereo? utotal * 4: utotal * 2;
-}
-
-static ssize_t pmac_ctx_u16_read(const u_char __user *userPtr, size_t userCount,
-			   u_char frame[], ssize_t *frameUsed,
-			   ssize_t frameLeft)
-{
-	int bal = expand_read_bal;
-	int mask = (dmasound.soft.format == AFMT_U16_LE? 0x0080: 0x8000);
-	short *fp = (short *) &frame[*frameUsed];
-	short __user *up = (short __user *) userPtr;
-	int stereo = dmasound.soft.stereo;
-	int hSpeed = dmasound.hard.speed, sSpeed = dmasound.soft.speed;
-	int utotal, ftotal;
-
-	frameLeft >>= 2;
-	userCount >>= (stereo? 2: 1);
-	ftotal = frameLeft;
-	utotal = userCount;
-	while (frameLeft) {
-		int datal,datar;
-
-		if (bal<0 && userCount == 0)
-			break;
-
-		datal = *fp++;
-		datal = (datal * software_input_volume) >> 7;
-		datal ^= mask;
-		if (stereo) {
-			datar = *fp;
-			datar = (datar * software_input_volume) >> 7;
-			datar ^= mask;
-		}
-		fp++;
-		if (bal < 0) {
-			if (put_user(datal, up++))
-				return -EFAULT;
-			if (stereo) {
-				if (put_user(datar, up++))
-					return -EFAULT;
-			}
-			userCount--;
-			bal += hSpeed;
-		}
-		frameLeft--;
-		bal -= sSpeed;
-	}
-	expand_read_bal=bal;
-	*frameUsed += (ftotal - frameLeft) * 4;
-	utotal -= userCount;
-	return stereo? utotal * 4: utotal * 2;
-}
-
-
-TRANS transAwacsNormal = {
-	.ct_ulaw=	pmac_ct_law,
-	.ct_alaw=	pmac_ct_law,
-	.ct_s8=		pmac_ct_s8,
-	.ct_u8=		pmac_ct_u8,
-	.ct_s16be=	pmac_ct_s16,
-	.ct_u16be=	pmac_ct_u16,
-	.ct_s16le=	pmac_ct_s16,
-	.ct_u16le=	pmac_ct_u16,
-};
-
-TRANS transAwacsExpand = {
-	.ct_ulaw=	pmac_ctx_law,
-	.ct_alaw=	pmac_ctx_law,
-	.ct_s8=		pmac_ctx_s8,
-	.ct_u8=		pmac_ctx_u8,
-	.ct_s16be=	pmac_ctx_s16,
-	.ct_u16be=	pmac_ctx_u16,
-	.ct_s16le=	pmac_ctx_s16,
-	.ct_u16le=	pmac_ctx_u16,
-};
-
-TRANS transAwacsNormalRead = {
-	.ct_s8=		pmac_ct_s8_read,
-	.ct_u8=		pmac_ct_u8_read,
-	.ct_s16be=	pmac_ct_s16_read,
-	.ct_u16be=	pmac_ct_u16_read,
-	.ct_s16le=	pmac_ct_s16_read,
-	.ct_u16le=	pmac_ct_u16_read,
-};
-
-TRANS transAwacsExpandRead = {
-	.ct_s8=		pmac_ctx_s8_read,
-	.ct_u8=		pmac_ctx_u8_read,
-	.ct_s16be=	pmac_ctx_s16_read,
-	.ct_u16be=	pmac_ctx_u16_read,
-	.ct_s16le=	pmac_ctx_s16_read,
-	.ct_u16le=	pmac_ctx_u16_read,
-};
-
-/* translation tables */
-/* 16 bit mu-law */
-
-static short dmasound_ulaw2dma16[] = {
-	-32124,	-31100,	-30076,	-29052,	-28028,	-27004,	-25980,	-24956,
-	-23932,	-22908,	-21884,	-20860,	-19836,	-18812,	-17788,	-16764,
-	-15996,	-15484,	-14972,	-14460,	-13948,	-13436,	-12924,	-12412,
-	-11900,	-11388,	-10876,	-10364,	-9852,	-9340,	-8828,	-8316,
-	-7932,	-7676,	-7420,	-7164,	-6908,	-6652,	-6396,	-6140,
-	-5884,	-5628,	-5372,	-5116,	-4860,	-4604,	-4348,	-4092,
-	-3900,	-3772,	-3644,	-3516,	-3388,	-3260,	-3132,	-3004,
-	-2876,	-2748,	-2620,	-2492,	-2364,	-2236,	-2108,	-1980,
-	-1884,	-1820,	-1756,	-1692,	-1628,	-1564,	-1500,	-1436,
-	-1372,	-1308,	-1244,	-1180,	-1116,	-1052,	-988,	-924,
-	-876,	-844,	-812,	-780,	-748,	-716,	-684,	-652,
-	-620,	-588,	-556,	-524,	-492,	-460,	-428,	-396,
-	-372,	-356,	-340,	-324,	-308,	-292,	-276,	-260,
-	-244,	-228,	-212,	-196,	-180,	-164,	-148,	-132,
-	-120,	-112,	-104,	-96,	-88,	-80,	-72,	-64,
-	-56,	-48,	-40,	-32,	-24,	-16,	-8,	0,
-	32124,	31100,	30076,	29052,	28028,	27004,	25980,	24956,
-	23932,	22908,	21884,	20860,	19836,	18812,	17788,	16764,
-	15996,	15484,	14972,	14460,	13948,	13436,	12924,	12412,
-	11900,	11388,	10876,	10364,	9852,	9340,	8828,	8316,
-	7932,	7676,	7420,	7164,	6908,	6652,	6396,	6140,
-	5884,	5628,	5372,	5116,	4860,	4604,	4348,	4092,
-	3900,	3772,	3644,	3516,	3388,	3260,	3132,	3004,
-	2876,	2748,	2620,	2492,	2364,	2236,	2108,	1980,
-	1884,	1820,	1756,	1692,	1628,	1564,	1500,	1436,
-	1372,	1308,	1244,	1180,	1116,	1052,	988,	924,
-	876,	844,	812,	780,	748,	716,	684,	652,
-	620,	588,	556,	524,	492,	460,	428,	396,
-	372,	356,	340,	324,	308,	292,	276,	260,
-	244,	228,	212,	196,	180,	164,	148,	132,
-	120,	112,	104,	96,	88,	80,	72,	64,
-	56,	48,	40,	32,	24,	16,	8,	0,
-};
-
-/* 16 bit A-law */
-
-static short dmasound_alaw2dma16[] = {
-	-5504,	-5248,	-6016,	-5760,	-4480,	-4224,	-4992,	-4736,
-	-7552,	-7296,	-8064,	-7808,	-6528,	-6272,	-7040,	-6784,
-	-2752,	-2624,	-3008,	-2880,	-2240,	-2112,	-2496,	-2368,
-	-3776,	-3648,	-4032,	-3904,	-3264,	-3136,	-3520,	-3392,
-	-22016,	-20992,	-24064,	-23040,	-17920,	-16896,	-19968,	-18944,
-	-30208,	-29184,	-32256,	-31232,	-26112,	-25088,	-28160,	-27136,
-	-11008,	-10496,	-12032,	-11520,	-8960,	-8448,	-9984,	-9472,
-	-15104,	-14592,	-16128,	-15616,	-13056,	-12544,	-14080,	-13568,
-	-344,	-328,	-376,	-360,	-280,	-264,	-312,	-296,
-	-472,	-456,	-504,	-488,	-408,	-392,	-440,	-424,
-	-88,	-72,	-120,	-104,	-24,	-8,	-56,	-40,
-	-216,	-200,	-248,	-232,	-152,	-136,	-184,	-168,
-	-1376,	-1312,	-1504,	-1440,	-1120,	-1056,	-1248,	-1184,
-	-1888,	-1824,	-2016,	-1952,	-1632,	-1568,	-1760,	-1696,
-	-688,	-656,	-752,	-720,	-560,	-528,	-624,	-592,
-	-944,	-912,	-1008,	-976,	-816,	-784,	-880,	-848,
-	5504,	5248,	6016,	5760,	4480,	4224,	4992,	4736,
-	7552,	7296,	8064,	7808,	6528,	6272,	7040,	6784,
-	2752,	2624,	3008,	2880,	2240,	2112,	2496,	2368,
-	3776,	3648,	4032,	3904,	3264,	3136,	3520,	3392,
-	22016,	20992,	24064,	23040,	17920,	16896,	19968,	18944,
-	30208,	29184,	32256,	31232,	26112,	25088,	28160,	27136,
-	11008,	10496,	12032,	11520,	8960,	8448,	9984,	9472,
-	15104,	14592,	16128,	15616,	13056,	12544,	14080,	13568,
-	344,	328,	376,	360,	280,	264,	312,	296,
-	472,	456,	504,	488,	408,	392,	440,	424,
-	88,	72,	120,	104,	24,	8,	56,	40,
-	216,	200,	248,	232,	152,	136,	184,	168,
-	1376,	1312,	1504,	1440,	1120,	1056,	1248,	1184,
-	1888,	1824,	2016,	1952,	1632,	1568,	1760,	1696,
-	688,	656,	752,	720,	560,	528,	624,	592,
-	944,	912,	1008,	976,	816,	784,	880,	848,
-};
diff --git a/sound/oss/es1371.c b/sound/oss/es1371.c
deleted file mode 100644
index 5264857..0000000
--- a/sound/oss/es1371.c
+++ /dev/null
@@ -1,3131 +0,0 @@
-/*****************************************************************************/
-
-/*
- *      es1371.c  --  Creative Ensoniq ES1371.
- *
- *      Copyright (C) 1998-2001, 2003  Thomas Sailer (t.sailer@alumni.ethz.ch)
- *
- *      This program is free software; you can redistribute it and/or modify
- *      it under the terms of the GNU General Public License as published by
- *      the Free Software Foundation; either version 2 of the License, or
- *      (at your option) any later version.
- *
- *      This program is distributed in the hope that it will be useful,
- *      but WITHOUT ANY WARRANTY; without even the implied warranty of
- *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *      GNU General Public License for more details.
- *
- *      You should have received a copy of the GNU General Public License
- *      along with this program; if not, write to the Free Software
- *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Special thanks to Ensoniq
- *
- *  Supported devices:
- *  /dev/dsp    standard /dev/dsp device, (mostly) OSS compatible
- *  /dev/mixer  standard /dev/mixer device, (mostly) OSS compatible
- *  /dev/dsp1   additional DAC, like /dev/dsp, but outputs to mixer "SYNTH" setting
- *  /dev/midi   simple MIDI UART interface, no ioctl
- *
- *  NOTE: the card does not have any FM/Wavetable synthesizer, it is supposed
- *  to be done in software. That is what /dev/dac is for. By now (Q2 1998)
- *  there are several MIDI to PCM (WAV) packages, one of them is timidity.
- *
- *  Revision history
- *    04.06.1998   0.1   Initial release
- *                       Mixer stuff should be overhauled; especially optional AC97 mixer bits
- *                       should be detected. This results in strange behaviour of some mixer
- *                       settings, like master volume and mic.
- *    08.06.1998   0.2   First release using Alan Cox' soundcore instead of miscdevice
- *    03.08.1998   0.3   Do not include modversions.h
- *                       Now mixer behaviour can basically be selected between
- *                       "OSS documented" and "OSS actual" behaviour
- *    31.08.1998   0.4   Fix realplayer problems - dac.count issues
- *    27.10.1998   0.5   Fix joystick support
- *                       -- Oliver Neukum (c188@org.chemie.uni-muenchen.de)
- *    10.12.1998   0.6   Fix drain_dac trying to wait on not yet initialized DMA
- *    23.12.1998   0.7   Fix a few f_file & FMODE_ bugs
- *                       Don't wake up app until there are fragsize bytes to read/write
- *    06.01.1999   0.8   remove the silly SA_INTERRUPT flag.
- *                       hopefully killed the egcs section type conflict
- *    12.03.1999   0.9   cinfo.blocks should be reset after GETxPTR ioctl.
- *                       reported by Johan Maes <joma@telindus.be>
- *    22.03.1999   0.10  return EAGAIN instead of EBUSY when O_NONBLOCK
- *                       read/write cannot be executed
- *    07.04.1999   0.11  implemented the following ioctl's: SOUND_PCM_READ_RATE, 
- *                       SOUND_PCM_READ_CHANNELS, SOUND_PCM_READ_BITS; 
- *                       Alpha fixes reported by Peter Jones <pjones@redhat.com>
- *                       Another Alpha fix (wait_src_ready in init routine)
- *                       reported by "Ivan N. Kokshaysky" <ink@jurassic.park.msu.ru>
- *                       Note: joystick address handling might still be wrong on archs
- *                       other than i386
- *    15.06.1999   0.12  Fix bad allocation bug.
- *                       Thanks to Deti Fliegl <fliegl@in.tum.de>
- *    28.06.1999   0.13  Add pci_set_master
- *    03.08.1999   0.14  adapt to Linus' new __setup/__initcall
- *                       added kernel command line option "es1371=joystickaddr"
- *                       removed CONFIG_SOUND_ES1371_JOYPORT_BOOT kludge
- *    10.08.1999   0.15  (Re)added S/PDIF module option for cards revision >= 4.
- *                       Initial version by Dave Platt <dplatt@snulbug.mtview.ca.us>.
- *                       module_init/__setup fixes
- *    08.16.1999   0.16  Joe Cotellese <joec@ensoniq.com>
- *                       Added detection for ES1371 revision ID so that we can
- *                       detect the ES1373 and later parts.
- *                       added AC97 #defines for readability
- *                       added a /proc file system for dumping hardware state
- *                       updated SRC and CODEC w/r functions to accommodate bugs
- *                       in some versions of the ES137x chips.
- *    31.08.1999   0.17  add spin_lock_init
- *                       replaced current->state = x with set_current_state(x)
- *    03.09.1999   0.18  change read semantics for MIDI to match
- *                       OSS more closely; remove possible wakeup race
- *    21.10.1999   0.19  Round sampling rates, requested by
- *                       Kasamatsu Kenichi <t29w0267@ip.media.kyoto-u.ac.jp>
- *    27.10.1999   0.20  Added SigmaTel 3D enhancement string
- *                       Codec ID printing changes
- *    28.10.1999   0.21  More waitqueue races fixed
- *                       Joe Cotellese <joec@ensoniq.com>
- *                       Changed PCI detection routine so we can more easily
- *                       detect ES137x chip and derivatives.
- *    05.01.2000   0.22  Should now work with rev7 boards; patch by
- *                       Eric Lemar, elemar@cs.washington.edu
- *    08.01.2000   0.23  Prevent some ioctl's from returning bad count values on underrun/overrun;
- *                       Tim Janik's BSE (Bedevilled Sound Engine) found this
- *    07.02.2000   0.24  Use pci_alloc_consistent and pci_register_driver
- *    07.02.2000   0.25  Use ac97_codec
- *    01.03.2000   0.26  SPDIF patch by Mikael Bouillot <mikael.bouillot@bigfoot.com>
- *                       Use pci_module_init
- *    21.11.2000   0.27  Initialize dma buffers in poll, otherwise poll may return a bogus mask
- *    12.12.2000   0.28  More dma buffer initializations, patch from
- *                       Tjeerd Mulder <tjeerd.mulder@fujitsu-siemens.com>
- *    05.01.2001   0.29  Hopefully updates will not be required anymore when Creative bumps
- *                       the CT5880 revision.
- *                       suggested by Stephan Müller <smueller@chronox.de>
- *    31.01.2001   0.30  Register/Unregister gameport
- *                       Fix SETTRIGGER non OSS API conformity
- *    14.07.2001   0.31  Add list of laptops needing amplifier control
- *    03.01.2003   0.32  open_mode fixes from Georg Acher <acher@in.tum.de>
- */
-
-/*****************************************************************************/
-      
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/ioport.h>
-#include <linux/sched.h>
-#include <linux/delay.h>
-#include <linux/sound.h>
-#include <linux/slab.h>
-#include <linux/soundcard.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/poll.h>
-#include <linux/bitops.h>
-#include <linux/proc_fs.h>
-#include <linux/spinlock.h>
-#include <linux/smp_lock.h>
-#include <linux/ac97_codec.h>
-#include <linux/gameport.h>
-#include <linux/wait.h>
-#include <linux/dma-mapping.h>
-#include <linux/mutex.h>
-#include <linux/mm.h>
-#include <linux/kernel.h>
-
-#include <asm/io.h>
-#include <asm/page.h>
-#include <asm/uaccess.h>
-
-#if defined(CONFIG_GAMEPORT) || (defined(MODULE) && defined(CONFIG_GAMEPORT_MODULE))
-#define SUPPORT_JOYSTICK
-#endif
-
-/* --------------------------------------------------------------------- */
-
-#undef OSS_DOCUMENTED_MIXER_SEMANTICS
-#define ES1371_DEBUG
-#define DBG(x) {}
-/*#define DBG(x) {x}*/
-
-/* --------------------------------------------------------------------- */
-
-#ifndef PCI_VENDOR_ID_ENSONIQ
-#define PCI_VENDOR_ID_ENSONIQ        0x1274    
-#endif
-
-#ifndef PCI_VENDOR_ID_ECTIVA
-#define PCI_VENDOR_ID_ECTIVA         0x1102
-#endif
-
-#ifndef PCI_DEVICE_ID_ENSONIQ_ES1371
-#define PCI_DEVICE_ID_ENSONIQ_ES1371 0x1371
-#endif
-
-#ifndef PCI_DEVICE_ID_ENSONIQ_CT5880
-#define PCI_DEVICE_ID_ENSONIQ_CT5880 0x5880
-#endif
-
-#ifndef PCI_DEVICE_ID_ECTIVA_EV1938
-#define PCI_DEVICE_ID_ECTIVA_EV1938 0x8938
-#endif
-
-/* ES1371 chip ID */
-/* This is a little confusing because all ES1371 compatible chips have the
-   same DEVICE_ID, the only thing differentiating them is the REV_ID field.
-   This is only significant if you want to enable features on the later parts.
-   Yes, I know it's stupid and why didn't we use the sub IDs?
-*/
-#define ES1371REV_ES1373_A  0x04
-#define ES1371REV_ES1373_B  0x06
-#define ES1371REV_CT5880_A  0x07
-#define CT5880REV_CT5880_C  0x02
-#define CT5880REV_CT5880_D  0x03
-#define ES1371REV_ES1371_B  0x09
-#define EV1938REV_EV1938_A  0x00
-#define ES1371REV_ES1373_8  0x08
-
-#define ES1371_MAGIC  ((PCI_VENDOR_ID_ENSONIQ<<16)|PCI_DEVICE_ID_ENSONIQ_ES1371)
-
-#define ES1371_EXTENT             0x40
-#define JOY_EXTENT                8
-
-#define ES1371_REG_CONTROL        0x00
-#define ES1371_REG_STATUS         0x04 /* on the 5880 it is control/status */
-#define ES1371_REG_UART_DATA      0x08
-#define ES1371_REG_UART_STATUS    0x09
-#define ES1371_REG_UART_CONTROL   0x09
-#define ES1371_REG_UART_TEST      0x0a
-#define ES1371_REG_MEMPAGE        0x0c
-#define ES1371_REG_SRCONV         0x10
-#define ES1371_REG_CODEC          0x14
-#define ES1371_REG_LEGACY         0x18
-#define ES1371_REG_SERIAL_CONTROL 0x20
-#define ES1371_REG_DAC1_SCOUNT    0x24
-#define ES1371_REG_DAC2_SCOUNT    0x28
-#define ES1371_REG_ADC_SCOUNT     0x2c
-
-#define ES1371_REG_DAC1_FRAMEADR  0xc30
-#define ES1371_REG_DAC1_FRAMECNT  0xc34
-#define ES1371_REG_DAC2_FRAMEADR  0xc38
-#define ES1371_REG_DAC2_FRAMECNT  0xc3c
-#define ES1371_REG_ADC_FRAMEADR   0xd30
-#define ES1371_REG_ADC_FRAMECNT   0xd34
-
-#define ES1371_FMT_U8_MONO     0
-#define ES1371_FMT_U8_STEREO   1
-#define ES1371_FMT_S16_MONO    2
-#define ES1371_FMT_S16_STEREO  3
-#define ES1371_FMT_STEREO      1
-#define ES1371_FMT_S16         2
-#define ES1371_FMT_MASK        3
-
-static const unsigned sample_size[] = { 1, 2, 2, 4 };
-static const unsigned sample_shift[] = { 0, 1, 1, 2 };
-
-#define CTRL_RECEN_B    0x08000000  /* 1 = don't mix analog in to digital out */
-#define CTRL_SPDIFEN_B  0x04000000
-#define CTRL_JOY_SHIFT  24
-#define CTRL_JOY_MASK   3
-#define CTRL_JOY_200    0x00000000  /* joystick base address */
-#define CTRL_JOY_208    0x01000000
-#define CTRL_JOY_210    0x02000000
-#define CTRL_JOY_218    0x03000000
-#define CTRL_GPIO_IN0   0x00100000  /* general purpose inputs/outputs */
-#define CTRL_GPIO_IN1   0x00200000
-#define CTRL_GPIO_IN2   0x00400000
-#define CTRL_GPIO_IN3   0x00800000
-#define CTRL_GPIO_OUT0  0x00010000
-#define CTRL_GPIO_OUT1  0x00020000
-#define CTRL_GPIO_OUT2  0x00040000
-#define CTRL_GPIO_OUT3  0x00080000
-#define CTRL_MSFMTSEL   0x00008000  /* MPEG serial data fmt: 0 = Sony, 1 = I2S */
-#define CTRL_SYNCRES    0x00004000  /* AC97 warm reset */
-#define CTRL_ADCSTOP    0x00002000  /* stop ADC transfers */
-#define CTRL_PWR_INTRM  0x00001000  /* 1 = power level ints enabled */
-#define CTRL_M_CB       0x00000800  /* recording source: 0 = ADC, 1 = MPEG */
-#define CTRL_CCB_INTRM  0x00000400  /* 1 = CCB "voice" ints enabled */
-#define CTRL_PDLEV0     0x00000000  /* power down level */
-#define CTRL_PDLEV1     0x00000100
-#define CTRL_PDLEV2     0x00000200
-#define CTRL_PDLEV3     0x00000300
-#define CTRL_BREQ       0x00000080  /* 1 = test mode (internal mem test) */
-#define CTRL_DAC1_EN    0x00000040  /* enable DAC1 */
-#define CTRL_DAC2_EN    0x00000020  /* enable DAC2 */
-#define CTRL_ADC_EN     0x00000010  /* enable ADC */
-#define CTRL_UART_EN    0x00000008  /* enable MIDI uart */
-#define CTRL_JYSTK_EN   0x00000004  /* enable Joystick port */
-#define CTRL_XTALCLKDIS 0x00000002  /* 1 = disable crystal clock input */
-#define CTRL_PCICLKDIS  0x00000001  /* 1 = disable PCI clock distribution */
-
-
-#define STAT_INTR       0x80000000  /* wired or of all interrupt bits */
-#define CSTAT_5880_AC97_RST 0x20000000 /* CT5880 Reset bit */
-#define STAT_EN_SPDIF   0x00040000  /* enable S/PDIF circuitry */
-#define STAT_TS_SPDIF   0x00020000  /* test S/PDIF circuitry */
-#define STAT_TESTMODE   0x00010000  /* test ASIC */
-#define STAT_SYNC_ERR   0x00000100  /* 1 = codec sync error */
-#define STAT_VC         0x000000c0  /* CCB int source, 0=DAC1, 1=DAC2, 2=ADC, 3=undef */
-#define STAT_SH_VC      6
-#define STAT_MPWR       0x00000020  /* power level interrupt */
-#define STAT_MCCB       0x00000010  /* CCB int pending */
-#define STAT_UART       0x00000008  /* UART int pending */
-#define STAT_DAC1       0x00000004  /* DAC1 int pending */
-#define STAT_DAC2       0x00000002  /* DAC2 int pending */
-#define STAT_ADC        0x00000001  /* ADC int pending */
-
-#define USTAT_RXINT     0x80        /* UART rx int pending */
-#define USTAT_TXINT     0x04        /* UART tx int pending */
-#define USTAT_TXRDY     0x02        /* UART tx ready */
-#define USTAT_RXRDY     0x01        /* UART rx ready */
-
-#define UCTRL_RXINTEN   0x80        /* 1 = enable RX ints */
-#define UCTRL_TXINTEN   0x60        /* TX int enable field mask */
-#define UCTRL_ENA_TXINT 0x20        /* enable TX int */
-#define UCTRL_CNTRL     0x03        /* control field */
-#define UCTRL_CNTRL_SWR 0x03        /* software reset command */
-
-/* sample rate converter */
-#define SRC_OKSTATE        1
-
-#define SRC_RAMADDR_MASK   0xfe000000
-#define SRC_RAMADDR_SHIFT  25
-#define SRC_DAC1FREEZE     (1UL << 21)
-#define SRC_DAC2FREEZE      (1UL << 20)
-#define SRC_ADCFREEZE      (1UL << 19)
-
-
-#define SRC_WE             0x01000000  /* read/write control for SRC RAM */
-#define SRC_BUSY           0x00800000  /* SRC busy */
-#define SRC_DIS            0x00400000  /* 1 = disable SRC */
-#define SRC_DDAC1          0x00200000  /* 1 = disable accum update for DAC1 */
-#define SRC_DDAC2          0x00100000  /* 1 = disable accum update for DAC2 */
-#define SRC_DADC           0x00080000  /* 1 = disable accum update for ADC2 */
-#define SRC_CTLMASK        0x00780000
-#define SRC_RAMDATA_MASK   0x0000ffff
-#define SRC_RAMDATA_SHIFT  0
-
-#define SRCREG_ADC      0x78
-#define SRCREG_DAC1     0x70
-#define SRCREG_DAC2     0x74
-#define SRCREG_VOL_ADC  0x6c
-#define SRCREG_VOL_DAC1 0x7c
-#define SRCREG_VOL_DAC2 0x7e
-
-#define SRCREG_TRUNC_N     0x00
-#define SRCREG_INT_REGS    0x01
-#define SRCREG_ACCUM_FRAC  0x02
-#define SRCREG_VFREQ_FRAC  0x03
-
-#define CODEC_PIRD        0x00800000  /* 0 = write AC97 register */
-#define CODEC_PIADD_MASK  0x007f0000
-#define CODEC_PIADD_SHIFT 16
-#define CODEC_PIDAT_MASK  0x0000ffff
-#define CODEC_PIDAT_SHIFT 0
-
-#define CODEC_RDY         0x80000000  /* AC97 read data valid */
-#define CODEC_WIP         0x40000000  /* AC97 write in progress */
-#define CODEC_PORD        0x00800000  /* 0 = write AC97 register */
-#define CODEC_POADD_MASK  0x007f0000
-#define CODEC_POADD_SHIFT 16
-#define CODEC_PODAT_MASK  0x0000ffff
-#define CODEC_PODAT_SHIFT 0
-
-
-#define LEGACY_JFAST      0x80000000  /* fast joystick timing */
-#define LEGACY_FIRQ       0x01000000  /* force IRQ */
-
-#define SCTRL_DACTEST     0x00400000  /* 1 = DAC test, test vector generation purposes */
-#define SCTRL_P2ENDINC    0x00380000  /*  */
-#define SCTRL_SH_P2ENDINC 19
-#define SCTRL_P2STINC     0x00070000  /*  */
-#define SCTRL_SH_P2STINC  16
-#define SCTRL_R1LOOPSEL   0x00008000  /* 0 = loop mode */
-#define SCTRL_P2LOOPSEL   0x00004000  /* 0 = loop mode */
-#define SCTRL_P1LOOPSEL   0x00002000  /* 0 = loop mode */
-#define SCTRL_P2PAUSE     0x00001000  /* 1 = pause mode */
-#define SCTRL_P1PAUSE     0x00000800  /* 1 = pause mode */
-#define SCTRL_R1INTEN     0x00000400  /* enable interrupt */
-#define SCTRL_P2INTEN     0x00000200  /* enable interrupt */
-#define SCTRL_P1INTEN     0x00000100  /* enable interrupt */
-#define SCTRL_P1SCTRLD    0x00000080  /* reload sample count register for DAC1 */
-#define SCTRL_P2DACSEN    0x00000040  /* 1 = DAC2 play back last sample when disabled */
-#define SCTRL_R1SEB       0x00000020  /* 1 = 16bit */
-#define SCTRL_R1SMB       0x00000010  /* 1 = stereo */
-#define SCTRL_R1FMT       0x00000030  /* format mask */
-#define SCTRL_SH_R1FMT    4
-#define SCTRL_P2SEB       0x00000008  /* 1 = 16bit */
-#define SCTRL_P2SMB       0x00000004  /* 1 = stereo */
-#define SCTRL_P2FMT       0x0000000c  /* format mask */
-#define SCTRL_SH_P2FMT    2
-#define SCTRL_P1SEB       0x00000002  /* 1 = 16bit */
-#define SCTRL_P1SMB       0x00000001  /* 1 = stereo */
-#define SCTRL_P1FMT       0x00000003  /* format mask */
-#define SCTRL_SH_P1FMT    0
-
-
-/* misc stuff */
-#define POLL_COUNT   0x1000
-#define FMODE_DAC         4           /* slight misuse of mode_t */
-
-/* MIDI buffer sizes */
-
-#define MIDIINBUF  256
-#define MIDIOUTBUF 256
-
-#define FMODE_MIDI_SHIFT 3
-#define FMODE_MIDI_READ  (FMODE_READ << FMODE_MIDI_SHIFT)
-#define FMODE_MIDI_WRITE (FMODE_WRITE << FMODE_MIDI_SHIFT)
-
-#define ES1371_MODULE_NAME "es1371"
-#define PFX ES1371_MODULE_NAME ": "
-
-/* --------------------------------------------------------------------- */
-
-struct es1371_state {
-	/* magic */
-	unsigned int magic;
-
-	/* list of es1371 devices */
-	struct list_head devs;
-
-	/* the corresponding pci_dev structure */
-	struct pci_dev *dev;
-
-	/* soundcore stuff */
-	int dev_audio;
-	int dev_dac;
-	int dev_midi;
-	
-	/* hardware resources */
-	unsigned long io; /* long for SPARC */
-	unsigned int irq;
-
-	/* PCI ID's */
-	u16 vendor;
-	u16 device;
-        u8 rev; /* the chip revision */
-
-	/* options */
-	int spdif_volume; /* S/PDIF output is enabled if != -1 */
-
-#ifdef ES1371_DEBUG
-        /* debug /proc entry */
-	struct proc_dir_entry *ps;
-#endif /* ES1371_DEBUG */
-
-	struct ac97_codec *codec;
-
-	/* wave stuff */
-	unsigned ctrl;
-	unsigned sctrl;
-	unsigned dac1rate, dac2rate, adcrate;
-
-	spinlock_t lock;
-	struct mutex open_mutex;
-	mode_t open_mode;
-	wait_queue_head_t open_wait;
-
-	struct dmabuf {
-		void *rawbuf;
-		dma_addr_t dmaaddr;
-		unsigned buforder;
-		unsigned numfrag;
-		unsigned fragshift;
-		unsigned hwptr, swptr;
-		unsigned total_bytes;
-		int count;
-		unsigned error; /* over/underrun */
-		wait_queue_head_t wait;
-		/* redundant, but makes calculations easier */
-		unsigned fragsize;
-		unsigned dmasize;
-		unsigned fragsamples;
-		/* OSS stuff */
-		unsigned mapped:1;
-		unsigned ready:1;
-		unsigned endcleared:1;
-		unsigned enabled:1;
-		unsigned ossfragshift;
-		int ossmaxfrags;
-		unsigned subdivision;
-	} dma_dac1, dma_dac2, dma_adc;
-
-	/* midi stuff */
-	struct {
-		unsigned ird, iwr, icnt;
-		unsigned ord, owr, ocnt;
-		wait_queue_head_t iwait;
-		wait_queue_head_t owait;
-		unsigned char ibuf[MIDIINBUF];
-		unsigned char obuf[MIDIOUTBUF];
-	} midi;
-
-#ifdef SUPPORT_JOYSTICK
-	struct gameport *gameport;
-#endif
-
-	struct mutex sem;
-};
-
-/* --------------------------------------------------------------------- */
-
-static LIST_HEAD(devs);
-
-/* --------------------------------------------------------------------- */
-
-static inline unsigned ld2(unsigned int x)
-{
-	unsigned r = 0;
-	
-	if (x >= 0x10000) {
-		x >>= 16;
-		r += 16;
-	}
-	if (x >= 0x100) {
-		x >>= 8;
-		r += 8;
-	}
-	if (x >= 0x10) {
-		x >>= 4;
-		r += 4;
-	}
-	if (x >= 4) {
-		x >>= 2;
-		r += 2;
-	}
-	if (x >= 2)
-		r++;
-	return r;
-}
-
-/* --------------------------------------------------------------------- */
-
-static unsigned wait_src_ready(struct es1371_state *s)
-{
-	unsigned int t, r;
-
-	for (t = 0; t < POLL_COUNT; t++) {
-		if (!((r = inl(s->io + ES1371_REG_SRCONV)) & SRC_BUSY))
-			return r;
-		udelay(1);
-	}
-	printk(KERN_DEBUG PFX "sample rate converter timeout r = 0x%08x\n", r);
-	return r;
-}
-
-static unsigned src_read(struct es1371_state *s, unsigned reg)
-{
-        unsigned int temp,i,orig;
-
-        /* wait for ready */
-        temp = wait_src_ready (s);
-
-        /* we can only access the SRC at certain times, make sure
-           we're allowed to before we read */
-           
-        orig = temp;
-        /* expose the SRC state bits */
-        outl ( (temp & SRC_CTLMASK) | (reg << SRC_RAMADDR_SHIFT) | 0x10000UL,
-               s->io + ES1371_REG_SRCONV);
-
-        /* now, wait for busy and the correct time to read */
-        temp = wait_src_ready (s);
-
-        if ( (temp & 0x00870000UL ) != ( SRC_OKSTATE << 16 )){
-                /* wait for the right state */
-                for (i=0; i<POLL_COUNT; i++){
-                        temp = inl (s->io + ES1371_REG_SRCONV);
-                        if ( (temp & 0x00870000UL ) == ( SRC_OKSTATE << 16 ))
-                                break;
-                }
-        }
-
-        /* hide the state bits */
-        outl ((orig & SRC_CTLMASK) | (reg << SRC_RAMADDR_SHIFT), s->io + ES1371_REG_SRCONV);
-        return temp;
-                        
-                
-}
-
-static void src_write(struct es1371_state *s, unsigned reg, unsigned data)
-{
-      
-	unsigned int r;
-
-	r = wait_src_ready(s) & (SRC_DIS | SRC_DDAC1 | SRC_DDAC2 | SRC_DADC);
-	r |= (reg << SRC_RAMADDR_SHIFT) & SRC_RAMADDR_MASK;
-	r |= (data << SRC_RAMDATA_SHIFT) & SRC_RAMDATA_MASK;
-	outl(r | SRC_WE, s->io + ES1371_REG_SRCONV);
-
-}
-
-/* --------------------------------------------------------------------- */
-
-/* most of the following here is black magic */
-static void set_adc_rate(struct es1371_state *s, unsigned rate)
-{
-	unsigned long flags;
-	unsigned int n, truncm, freq;
-
-	if (rate > 48000)
-		rate = 48000;
-	if (rate < 4000)
-		rate = 4000;
-	n = rate / 3000;
-	if ((1 << n) & ((1 << 15) | (1 << 13) | (1 << 11) | (1 << 9)))
-		n--;
-	truncm = (21 * n - 1) | 1;
-        freq = ((48000UL << 15) / rate) * n;
-	s->adcrate = (48000UL << 15) / (freq / n);
-	spin_lock_irqsave(&s->lock, flags);
-	if (rate >= 24000) {
-		if (truncm > 239)
-			truncm = 239;
-		src_write(s, SRCREG_ADC+SRCREG_TRUNC_N, 
-			  (((239 - truncm) >> 1) << 9) | (n << 4));
-	} else {
-		if (truncm > 119)
-			truncm = 119;
-		src_write(s, SRCREG_ADC+SRCREG_TRUNC_N, 
-			  0x8000 | (((119 - truncm) >> 1) << 9) | (n << 4));
-	}		
-	src_write(s, SRCREG_ADC+SRCREG_INT_REGS, 
-		  (src_read(s, SRCREG_ADC+SRCREG_INT_REGS) & 0x00ff) |
-		  ((freq >> 5) & 0xfc00));
-	src_write(s, SRCREG_ADC+SRCREG_VFREQ_FRAC, freq & 0x7fff);
-	src_write(s, SRCREG_VOL_ADC, n << 8);
-	src_write(s, SRCREG_VOL_ADC+1, n << 8);
-	spin_unlock_irqrestore(&s->lock, flags);
-}
-
-
-static void set_dac1_rate(struct es1371_state *s, unsigned rate)
-{
-	unsigned long flags;
-	unsigned int freq, r;
-
-	if (rate > 48000)
-		rate = 48000;
-	if (rate < 4000)
-		rate = 4000;
-        freq = ((rate << 15) + 1500) / 3000;
-	s->dac1rate = (freq * 3000 + 16384) >> 15;
-	spin_lock_irqsave(&s->lock, flags);
-	r = (wait_src_ready(s) & (SRC_DIS | SRC_DDAC2 | SRC_DADC)) | SRC_DDAC1;
-	outl(r, s->io + ES1371_REG_SRCONV);
-	src_write(s, SRCREG_DAC1+SRCREG_INT_REGS, 
-		  (src_read(s, SRCREG_DAC1+SRCREG_INT_REGS) & 0x00ff) |
-		  ((freq >> 5) & 0xfc00));
-	src_write(s, SRCREG_DAC1+SRCREG_VFREQ_FRAC, freq & 0x7fff);
-	r = (wait_src_ready(s) & (SRC_DIS | SRC_DDAC2 | SRC_DADC));
-	outl(r, s->io + ES1371_REG_SRCONV);
-	spin_unlock_irqrestore(&s->lock, flags);
-}
-
-static void set_dac2_rate(struct es1371_state *s, unsigned rate)
-{
-	unsigned long flags;
-	unsigned int freq, r;
-
-	if (rate > 48000)
-		rate = 48000;
-	if (rate < 4000)
-		rate = 4000;
-        freq = ((rate << 15) + 1500) / 3000;
-	s->dac2rate = (freq * 3000 + 16384) >> 15;
-	spin_lock_irqsave(&s->lock, flags);
-	r = (wait_src_ready(s) & (SRC_DIS | SRC_DDAC1 | SRC_DADC)) | SRC_DDAC2;
-	outl(r, s->io + ES1371_REG_SRCONV);
-	src_write(s, SRCREG_DAC2+SRCREG_INT_REGS, 
-		  (src_read(s, SRCREG_DAC2+SRCREG_INT_REGS) & 0x00ff) |
-		  ((freq >> 5) & 0xfc00));
-	src_write(s, SRCREG_DAC2+SRCREG_VFREQ_FRAC, freq & 0x7fff);
-	r = (wait_src_ready(s) & (SRC_DIS | SRC_DDAC1 | SRC_DADC));
-	outl(r, s->io + ES1371_REG_SRCONV);
-	spin_unlock_irqrestore(&s->lock, flags);
-}
-
-/* --------------------------------------------------------------------- */
-
-static void __devinit src_init(struct es1371_state *s)
-{
-        unsigned int i;
-
-        /* before we enable or disable the SRC we need
-           to wait for it to become ready */
-        wait_src_ready(s);
-
-        outl(SRC_DIS, s->io + ES1371_REG_SRCONV);
-
-        for (i = 0; i < 0x80; i++)
-                src_write(s, i, 0);
-
-        src_write(s, SRCREG_DAC1+SRCREG_TRUNC_N, 16 << 4);
-        src_write(s, SRCREG_DAC1+SRCREG_INT_REGS, 16 << 10);
-        src_write(s, SRCREG_DAC2+SRCREG_TRUNC_N, 16 << 4);
-        src_write(s, SRCREG_DAC2+SRCREG_INT_REGS, 16 << 10);
-        src_write(s, SRCREG_VOL_ADC, 1 << 12);
-        src_write(s, SRCREG_VOL_ADC+1, 1 << 12);
-        src_write(s, SRCREG_VOL_DAC1, 1 << 12);
-        src_write(s, SRCREG_VOL_DAC1+1, 1 << 12);
-        src_write(s, SRCREG_VOL_DAC2, 1 << 12);
-        src_write(s, SRCREG_VOL_DAC2+1, 1 << 12);
-        set_adc_rate(s, 22050);
-        set_dac1_rate(s, 22050);
-        set_dac2_rate(s, 22050);
-
-        /* WARNING:
-         * enabling the sample rate converter without properly programming
-         * its parameters causes the chip to lock up (the SRC busy bit will
-         * be stuck high, and I've found no way to rectify this other than
-         * power cycle)
-         */
-        wait_src_ready(s);
-        outl(0, s->io+ES1371_REG_SRCONV);
-}
-
-/* --------------------------------------------------------------------- */
-
-static void wrcodec(struct ac97_codec *codec, u8 addr, u16 data)
-{
-	struct es1371_state *s = (struct es1371_state *)codec->private_data;
-	unsigned long flags;
-	unsigned t, x;
-        
-	spin_lock_irqsave(&s->lock, flags);
-	for (t = 0; t < POLL_COUNT; t++)
-		if (!(inl(s->io+ES1371_REG_CODEC) & CODEC_WIP))
-			break;
-
-        /* save the current state for later */
-        x = wait_src_ready(s);
-
-        /* enable SRC state data in SRC mux */
-	outl((x & (SRC_DIS | SRC_DDAC1 | SRC_DDAC2 | SRC_DADC)) | 0x00010000,
-	     s->io+ES1371_REG_SRCONV);
-
-        /* wait for not busy (state 0) first to avoid
-           transition states */
-        for (t=0; t<POLL_COUNT; t++){
-                if((inl(s->io+ES1371_REG_SRCONV) & 0x00870000) ==0 )
-                    break;
-                udelay(1);
-        }
-        
-        /* wait for a SAFE time to write addr/data and then do it, dammit */
-        for (t=0; t<POLL_COUNT; t++){
-                if((inl(s->io+ES1371_REG_SRCONV) & 0x00870000) ==0x00010000)
-                    break;
-                udelay(1);
-        }
-
-	outl(((addr << CODEC_POADD_SHIFT) & CODEC_POADD_MASK) |
-	     ((data << CODEC_PODAT_SHIFT) & CODEC_PODAT_MASK), s->io+ES1371_REG_CODEC);
-
-	/* restore SRC reg */
-	wait_src_ready(s);
-	outl(x, s->io+ES1371_REG_SRCONV);
-	spin_unlock_irqrestore(&s->lock, flags);
-}
-
-static u16 rdcodec(struct ac97_codec *codec, u8 addr)
-{
-	struct es1371_state *s = (struct es1371_state *)codec->private_data;
-	unsigned long flags;
-	unsigned t, x;
-
-	spin_lock_irqsave(&s->lock, flags);
-	
-        /* wait for WIP to go away */
-	for (t = 0; t < 0x1000; t++)
-		if (!(inl(s->io+ES1371_REG_CODEC) & CODEC_WIP))
-			break;
-
-	/* save the current state for later */
-	x = (wait_src_ready(s) & (SRC_DIS | SRC_DDAC1 | SRC_DDAC2 | SRC_DADC));
-
-	/* enable SRC state data in SRC mux */
-	outl( x | 0x00010000,
-              s->io+ES1371_REG_SRCONV);
-
-        /* wait for not busy (state 0) first to avoid
-           transition states */
-        for (t=0; t<POLL_COUNT; t++){
-                if((inl(s->io+ES1371_REG_SRCONV) & 0x00870000) ==0 )
-                    break;
-                udelay(1);
-        }
-        
-        /* wait for a SAFE time to write addr/data and then do it, dammit */
-        for (t=0; t<POLL_COUNT; t++){
-                if((inl(s->io+ES1371_REG_SRCONV) & 0x00870000) ==0x00010000)
-                    break;
-                udelay(1);
-        }
-
-	outl(((addr << CODEC_POADD_SHIFT) & CODEC_POADD_MASK) | CODEC_PORD, s->io+ES1371_REG_CODEC);
-	/* restore SRC reg */
-	wait_src_ready(s);
-	outl(x, s->io+ES1371_REG_SRCONV);
-
-        /* wait for WIP again */
-	for (t = 0; t < 0x1000; t++)
-		if (!(inl(s->io+ES1371_REG_CODEC) & CODEC_WIP))
-			break;
-        
-	/* now wait for the stinkin' data (RDY) */
-	for (t = 0; t < POLL_COUNT; t++)
-		if ((x = inl(s->io+ES1371_REG_CODEC)) & CODEC_RDY)
-			break;
-        
-	spin_unlock_irqrestore(&s->lock, flags);
-	return ((x & CODEC_PIDAT_MASK) >> CODEC_PIDAT_SHIFT);
-}
-
-/* --------------------------------------------------------------------- */
-
-static inline void stop_adc(struct es1371_state *s)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&s->lock, flags);
-	s->ctrl &= ~CTRL_ADC_EN;
-	outl(s->ctrl, s->io+ES1371_REG_CONTROL);
-	spin_unlock_irqrestore(&s->lock, flags);
-}	
-
-static inline void stop_dac1(struct es1371_state *s)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&s->lock, flags);
-	s->ctrl &= ~CTRL_DAC1_EN;
-	outl(s->ctrl, s->io+ES1371_REG_CONTROL);
-	spin_unlock_irqrestore(&s->lock, flags);
-}	
-
-static inline void stop_dac2(struct es1371_state *s)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&s->lock, flags);
-	s->ctrl &= ~CTRL_DAC2_EN;
-	outl(s->ctrl, s->io+ES1371_REG_CONTROL);
-	spin_unlock_irqrestore(&s->lock, flags);
-}	
-
-static void start_dac1(struct es1371_state *s)
-{
-	unsigned long flags;
-	unsigned fragremain, fshift;
-
-	spin_lock_irqsave(&s->lock, flags);
-	if (!(s->ctrl & CTRL_DAC1_EN) && (s->dma_dac1.mapped || s->dma_dac1.count > 0)
-	    && s->dma_dac1.ready) {
-		s->ctrl |= CTRL_DAC1_EN;
-		s->sctrl = (s->sctrl & ~(SCTRL_P1LOOPSEL | SCTRL_P1PAUSE | SCTRL_P1SCTRLD)) | SCTRL_P1INTEN;
-		outl(s->sctrl, s->io+ES1371_REG_SERIAL_CONTROL);
-		fragremain = ((- s->dma_dac1.hwptr) & (s->dma_dac1.fragsize-1));
-		fshift = sample_shift[(s->sctrl & SCTRL_P1FMT) >> SCTRL_SH_P1FMT];
-		if (fragremain < 2*fshift)
-			fragremain = s->dma_dac1.fragsize;
-		outl((fragremain >> fshift) - 1, s->io+ES1371_REG_DAC1_SCOUNT);
-		outl(s->ctrl, s->io+ES1371_REG_CONTROL);
-		outl((s->dma_dac1.fragsize >> fshift) - 1, s->io+ES1371_REG_DAC1_SCOUNT);
-	}
-	spin_unlock_irqrestore(&s->lock, flags);
-}	
-
-static void start_dac2(struct es1371_state *s)
-{
-	unsigned long flags;
-	unsigned fragremain, fshift;
-
-	spin_lock_irqsave(&s->lock, flags);
-	if (!(s->ctrl & CTRL_DAC2_EN) && (s->dma_dac2.mapped || s->dma_dac2.count > 0)
-	    && s->dma_dac2.ready) {
-		s->ctrl |= CTRL_DAC2_EN;
-		s->sctrl = (s->sctrl & ~(SCTRL_P2LOOPSEL | SCTRL_P2PAUSE | SCTRL_P2DACSEN | 
-					 SCTRL_P2ENDINC | SCTRL_P2STINC)) | SCTRL_P2INTEN |
-			(((s->sctrl & SCTRL_P2FMT) ? 2 : 1) << SCTRL_SH_P2ENDINC) | 
-			(0 << SCTRL_SH_P2STINC);
-		outl(s->sctrl, s->io+ES1371_REG_SERIAL_CONTROL);
-		fragremain = ((- s->dma_dac2.hwptr) & (s->dma_dac2.fragsize-1));
-		fshift = sample_shift[(s->sctrl & SCTRL_P2FMT) >> SCTRL_SH_P2FMT];
-		if (fragremain < 2*fshift)
-			fragremain = s->dma_dac2.fragsize;
-		outl((fragremain >> fshift) - 1, s->io+ES1371_REG_DAC2_SCOUNT);
-		outl(s->ctrl, s->io+ES1371_REG_CONTROL);
-		outl((s->dma_dac2.fragsize >> fshift) - 1, s->io+ES1371_REG_DAC2_SCOUNT);
-	}
-	spin_unlock_irqrestore(&s->lock, flags);
-}	
-
-static void start_adc(struct es1371_state *s)
-{
-	unsigned long flags;
-	unsigned fragremain, fshift;
-
-	spin_lock_irqsave(&s->lock, flags);
-	if (!(s->ctrl & CTRL_ADC_EN) && (s->dma_adc.mapped || s->dma_adc.count < (signed)(s->dma_adc.dmasize - 2*s->dma_adc.fragsize))
-	    && s->dma_adc.ready) {
-		s->ctrl |= CTRL_ADC_EN;
-		s->sctrl = (s->sctrl & ~SCTRL_R1LOOPSEL) | SCTRL_R1INTEN;
-		outl(s->sctrl, s->io+ES1371_REG_SERIAL_CONTROL);
-		fragremain = ((- s->dma_adc.hwptr) & (s->dma_adc.fragsize-1));
-		fshift = sample_shift[(s->sctrl & SCTRL_R1FMT) >> SCTRL_SH_R1FMT];
-		if (fragremain < 2*fshift)
-			fragremain = s->dma_adc.fragsize;
-		outl((fragremain >> fshift) - 1, s->io+ES1371_REG_ADC_SCOUNT);
-		outl(s->ctrl, s->io+ES1371_REG_CONTROL);
-		outl((s->dma_adc.fragsize >> fshift) - 1, s->io+ES1371_REG_ADC_SCOUNT);
-	}
-	spin_unlock_irqrestore(&s->lock, flags);
-}	
-
-/* --------------------------------------------------------------------- */
-
-#define DMABUF_DEFAULTORDER (17-PAGE_SHIFT)
-#define DMABUF_MINORDER 1
-
-
-static inline void dealloc_dmabuf(struct es1371_state *s, struct dmabuf *db)
-{
-	struct page *page, *pend;
-
-	if (db->rawbuf) {
-		/* undo marking the pages as reserved */
-		pend = virt_to_page(db->rawbuf + (PAGE_SIZE << db->buforder) - 1);
-		for (page = virt_to_page(db->rawbuf); page <= pend; page++)
-			ClearPageReserved(page);
-		pci_free_consistent(s->dev, PAGE_SIZE << db->buforder, db->rawbuf, db->dmaaddr);
-	}
-	db->rawbuf = NULL;
-	db->mapped = db->ready = 0;
-}
-
-static int prog_dmabuf(struct es1371_state *s, struct dmabuf *db, unsigned rate, unsigned fmt, unsigned reg)
-{
-	int order;
-	unsigned bytepersec;
-	unsigned bufs;
-	struct page *page, *pend;
-
-	db->hwptr = db->swptr = db->total_bytes = db->count = db->error = db->endcleared = 0;
-	if (!db->rawbuf) {
-		db->ready = db->mapped = 0;
-		for (order = DMABUF_DEFAULTORDER; order >= DMABUF_MINORDER; order--)
-			if ((db->rawbuf = pci_alloc_consistent(s->dev, PAGE_SIZE << order, &db->dmaaddr)))
-				break;
-		if (!db->rawbuf)
-			return -ENOMEM;
-		db->buforder = order;
-		/* now mark the pages as reserved; otherwise remap_pfn_range doesn't do what we want */
-		pend = virt_to_page(db->rawbuf + (PAGE_SIZE << db->buforder) - 1);
-		for (page = virt_to_page(db->rawbuf); page <= pend; page++)
-			SetPageReserved(page);
-	}
-	fmt &= ES1371_FMT_MASK;
-	bytepersec = rate << sample_shift[fmt];
-	bufs = PAGE_SIZE << db->buforder;
-	if (db->ossfragshift) {
-		if ((1000 << db->ossfragshift) < bytepersec)
-			db->fragshift = ld2(bytepersec/1000);
-		else
-			db->fragshift = db->ossfragshift;
-	} else {
-		db->fragshift = ld2(bytepersec/100/(db->subdivision ? db->subdivision : 1));
-		if (db->fragshift < 3)
-			db->fragshift = 3;
-	}
-	db->numfrag = bufs >> db->fragshift;
-	while (db->numfrag < 4 && db->fragshift > 3) {
-		db->fragshift--;
-		db->numfrag = bufs >> db->fragshift;
-	}
-	db->fragsize = 1 << db->fragshift;
-	if (db->ossmaxfrags >= 4 && db->ossmaxfrags < db->numfrag)
-		db->numfrag = db->ossmaxfrags;
-	db->fragsamples = db->fragsize >> sample_shift[fmt];
-	db->dmasize = db->numfrag << db->fragshift;
-	memset(db->rawbuf, (fmt & ES1371_FMT_S16) ? 0 : 0x80, db->dmasize);
-	outl((reg >> 8) & 15, s->io+ES1371_REG_MEMPAGE);
-	outl(db->dmaaddr, s->io+(reg & 0xff));
-	outl((db->dmasize >> 2)-1, s->io+((reg + 4) & 0xff));
-	db->enabled = 1;
-	db->ready = 1;
-	return 0;
-}
-
-static inline int prog_dmabuf_adc(struct es1371_state *s)
-{
-	stop_adc(s);
-	return prog_dmabuf(s, &s->dma_adc, s->adcrate, (s->sctrl >> SCTRL_SH_R1FMT) & ES1371_FMT_MASK, 
-			   ES1371_REG_ADC_FRAMEADR);
-}
-
-static inline int prog_dmabuf_dac2(struct es1371_state *s)
-{
-	stop_dac2(s);
-	return prog_dmabuf(s, &s->dma_dac2, s->dac2rate, (s->sctrl >> SCTRL_SH_P2FMT) & ES1371_FMT_MASK, 
-			   ES1371_REG_DAC2_FRAMEADR);
-}
-
-static inline int prog_dmabuf_dac1(struct es1371_state *s)
-{
-	stop_dac1(s);
-	return prog_dmabuf(s, &s->dma_dac1, s->dac1rate, (s->sctrl >> SCTRL_SH_P1FMT) & ES1371_FMT_MASK,
-			   ES1371_REG_DAC1_FRAMEADR);
-}
-
-static inline unsigned get_hwptr(struct es1371_state *s, struct dmabuf *db, unsigned reg)
-{
-	unsigned hwptr, diff;
-
-	outl((reg >> 8) & 15, s->io+ES1371_REG_MEMPAGE);
-	hwptr = (inl(s->io+(reg & 0xff)) >> 14) & 0x3fffc;
-	diff = (db->dmasize + hwptr - db->hwptr) % db->dmasize;
-	db->hwptr = hwptr;
-	return diff;
-}
-
-static inline void clear_advance(void *buf, unsigned bsize, unsigned bptr, unsigned len, unsigned char c)
-{
-	if (bptr + len > bsize) {
-		unsigned x = bsize - bptr;
-		memset(((char *)buf) + bptr, c, x);
-		bptr = 0;
-		len -= x;
-	}
-	memset(((char *)buf) + bptr, c, len);
-}
-
-/* call with spinlock held! */
-static void es1371_update_ptr(struct es1371_state *s)
-{
-	int diff;
-
-	/* update ADC pointer */
-	if (s->ctrl & CTRL_ADC_EN) {
-		diff = get_hwptr(s, &s->dma_adc, ES1371_REG_ADC_FRAMECNT);
-		s->dma_adc.total_bytes += diff;
-		s->dma_adc.count += diff;
-		if (s->dma_adc.count >= (signed)s->dma_adc.fragsize) 
-			wake_up(&s->dma_adc.wait);
-		if (!s->dma_adc.mapped) {
-			if (s->dma_adc.count > (signed)(s->dma_adc.dmasize - ((3 * s->dma_adc.fragsize) >> 1))) {
-				s->ctrl &= ~CTRL_ADC_EN;
-				outl(s->ctrl, s->io+ES1371_REG_CONTROL);
-				s->dma_adc.error++;
-			}
-		}
-	}
-	/* update DAC1 pointer */
-	if (s->ctrl & CTRL_DAC1_EN) {
-		diff = get_hwptr(s, &s->dma_dac1, ES1371_REG_DAC1_FRAMECNT);
-		s->dma_dac1.total_bytes += diff;
-		if (s->dma_dac1.mapped) {
-			s->dma_dac1.count += diff;
-			if (s->dma_dac1.count >= (signed)s->dma_dac1.fragsize)
-				wake_up(&s->dma_dac1.wait);
-		} else {
-			s->dma_dac1.count -= diff;
-			if (s->dma_dac1.count <= 0) {
-				s->ctrl &= ~CTRL_DAC1_EN;
-				outl(s->ctrl, s->io+ES1371_REG_CONTROL);
-				s->dma_dac1.error++;
-			} else if (s->dma_dac1.count <= (signed)s->dma_dac1.fragsize && !s->dma_dac1.endcleared) {
-				clear_advance(s->dma_dac1.rawbuf, s->dma_dac1.dmasize, s->dma_dac1.swptr, 
-					      s->dma_dac1.fragsize, (s->sctrl & SCTRL_P1SEB) ? 0 : 0x80);
-				s->dma_dac1.endcleared = 1;
-			}
-			if (s->dma_dac1.count + (signed)s->dma_dac1.fragsize <= (signed)s->dma_dac1.dmasize)
-				wake_up(&s->dma_dac1.wait);
-		}
-	}
-	/* update DAC2 pointer */
-	if (s->ctrl & CTRL_DAC2_EN) {
-		diff = get_hwptr(s, &s->dma_dac2, ES1371_REG_DAC2_FRAMECNT);
-		s->dma_dac2.total_bytes += diff;
-		if (s->dma_dac2.mapped) {
-			s->dma_dac2.count += diff;
-			if (s->dma_dac2.count >= (signed)s->dma_dac2.fragsize)
-				wake_up(&s->dma_dac2.wait);
-		} else {
-			s->dma_dac2.count -= diff;
-			if (s->dma_dac2.count <= 0) {
-				s->ctrl &= ~CTRL_DAC2_EN;
-				outl(s->ctrl, s->io+ES1371_REG_CONTROL);
-				s->dma_dac2.error++;
-			} else if (s->dma_dac2.count <= (signed)s->dma_dac2.fragsize && !s->dma_dac2.endcleared) {
-				clear_advance(s->dma_dac2.rawbuf, s->dma_dac2.dmasize, s->dma_dac2.swptr, 
-					      s->dma_dac2.fragsize, (s->sctrl & SCTRL_P2SEB) ? 0 : 0x80);
-				s->dma_dac2.endcleared = 1;
-			}
-			if (s->dma_dac2.count + (signed)s->dma_dac2.fragsize <= (signed)s->dma_dac2.dmasize)
-				wake_up(&s->dma_dac2.wait);
-		}
-	}
-}
-
-/* hold spinlock for the following! */
-static void es1371_handle_midi(struct es1371_state *s)
-{
-	unsigned char ch;
-	int wake;
-
-	if (!(s->ctrl & CTRL_UART_EN))
-		return;
-	wake = 0;
-	while (inb(s->io+ES1371_REG_UART_STATUS) & USTAT_RXRDY) {
-		ch = inb(s->io+ES1371_REG_UART_DATA);
-		if (s->midi.icnt < MIDIINBUF) {
-			s->midi.ibuf[s->midi.iwr] = ch;
-			s->midi.iwr = (s->midi.iwr + 1) % MIDIINBUF;
-			s->midi.icnt++;
-		}
-		wake = 1;
-	}
-	if (wake)
-		wake_up(&s->midi.iwait);
-	wake = 0;
-	while ((inb(s->io+ES1371_REG_UART_STATUS) & USTAT_TXRDY) && s->midi.ocnt > 0) {
-		outb(s->midi.obuf[s->midi.ord], s->io+ES1371_REG_UART_DATA);
-		s->midi.ord = (s->midi.ord + 1) % MIDIOUTBUF;
-		s->midi.ocnt--;
-		if (s->midi.ocnt < MIDIOUTBUF-16)
-			wake = 1;
-	}
-	if (wake)
-		wake_up(&s->midi.owait);
-	outb((s->midi.ocnt > 0) ? UCTRL_RXINTEN | UCTRL_ENA_TXINT : UCTRL_RXINTEN, s->io+ES1371_REG_UART_CONTROL);
-}
-
-static irqreturn_t es1371_interrupt(int irq, void *dev_id)
-{
-        struct es1371_state *s = dev_id;
-	unsigned int intsrc, sctl;
-	
-	/* fastpath out, to ease interrupt sharing */
-	intsrc = inl(s->io+ES1371_REG_STATUS);
-	if (!(intsrc & 0x80000000))
-		return IRQ_NONE;
-	spin_lock(&s->lock);
-	/* clear audio interrupts first */
-	sctl = s->sctrl;
-	if (intsrc & STAT_ADC)
-		sctl &= ~SCTRL_R1INTEN;
-	if (intsrc & STAT_DAC1)
-		sctl &= ~SCTRL_P1INTEN;
-	if (intsrc & STAT_DAC2)
-		sctl &= ~SCTRL_P2INTEN;
-	outl(sctl, s->io+ES1371_REG_SERIAL_CONTROL);
-	outl(s->sctrl, s->io+ES1371_REG_SERIAL_CONTROL);
-	es1371_update_ptr(s);
-	es1371_handle_midi(s);
-	spin_unlock(&s->lock);
-	return IRQ_HANDLED;
-}
-
-/* --------------------------------------------------------------------- */
-
-static const char invalid_magic[] = KERN_CRIT PFX "invalid magic value\n";
-
-#define VALIDATE_STATE(s)                         \
-({                                                \
-	if (!(s) || (s)->magic != ES1371_MAGIC) { \
-		printk(invalid_magic);            \
-		return -ENXIO;                    \
-	}                                         \
-})
-
-/* --------------------------------------------------------------------- */
-
-/* Conversion table for S/PDIF PCM volume emulation through the SRC */
-/* dB-linear table of DAC vol values; -0dB to -46.5dB with mute */
-static const unsigned short DACVolTable[101] =
-{
-	0x1000, 0x0f2a, 0x0e60, 0x0da0, 0x0cea, 0x0c3e, 0x0b9a, 0x0aff,
-	0x0a6d, 0x09e1, 0x095e, 0x08e1, 0x086a, 0x07fa, 0x078f, 0x072a,
-	0x06cb, 0x0670, 0x061a, 0x05c9, 0x057b, 0x0532, 0x04ed, 0x04ab,
-	0x046d, 0x0432, 0x03fa, 0x03c5, 0x0392, 0x0363, 0x0335, 0x030b,
-	0x02e2, 0x02bc, 0x0297, 0x0275, 0x0254, 0x0235, 0x0217, 0x01fb,
-	0x01e1, 0x01c8, 0x01b0, 0x0199, 0x0184, 0x0170, 0x015d, 0x014b,
-	0x0139, 0x0129, 0x0119, 0x010b, 0x00fd, 0x00f0, 0x00e3, 0x00d7,
-	0x00cc, 0x00c1, 0x00b7, 0x00ae, 0x00a5, 0x009c, 0x0094, 0x008c,
-	0x0085, 0x007e, 0x0077, 0x0071, 0x006b, 0x0066, 0x0060, 0x005b,
-	0x0057, 0x0052, 0x004e, 0x004a, 0x0046, 0x0042, 0x003f, 0x003c,
-	0x0038, 0x0036, 0x0033, 0x0030, 0x002e, 0x002b, 0x0029, 0x0027,
-	0x0025, 0x0023, 0x0021, 0x001f, 0x001e, 0x001c, 0x001b, 0x0019,
-	0x0018, 0x0017, 0x0016, 0x0014, 0x0000
-};
-
-/*
- * when we are in S/PDIF mode, we want to disable any analog output so
- * we filter the mixer ioctls 
- */
-static int mixdev_ioctl(struct ac97_codec *codec, unsigned int cmd, unsigned long arg)
-{
-	struct es1371_state *s = (struct es1371_state *)codec->private_data;
-	int val;
-	unsigned long flags;
-	unsigned int left, right;
-
-	VALIDATE_STATE(s);
-	/* filter mixer ioctls to catch PCM and MASTER volume when in S/PDIF mode */
-	if (s->spdif_volume == -1)
-		return codec->mixer_ioctl(codec, cmd, arg);
-	switch (cmd) {
-	case SOUND_MIXER_WRITE_VOLUME:
-		return 0;
-
-	case SOUND_MIXER_WRITE_PCM:   /* use SRC for PCM volume */
-		if (get_user(val, (int __user *)arg))
-			return -EFAULT;
-		right = ((val >> 8)  & 0xff);
-		left = (val  & 0xff);
-		if (right > 100)
-			right = 100;
-		if (left > 100)
-			left = 100;
-		s->spdif_volume = (right << 8) | left;
-		spin_lock_irqsave(&s->lock, flags);
-		src_write(s, SRCREG_VOL_DAC2, DACVolTable[100 - left]);
-		src_write(s, SRCREG_VOL_DAC2+1, DACVolTable[100 - right]);
-		spin_unlock_irqrestore(&s->lock, flags);
-		return 0;
-	
-	case SOUND_MIXER_READ_PCM:
-		return put_user(s->spdif_volume, (int __user *)arg);
-	}
-	return codec->mixer_ioctl(codec, cmd, arg);
-}
-
-/* --------------------------------------------------------------------- */
-
-/*
- * AC97 Mixer Register to Connections mapping of the Concert 97 board
- *
- * AC97_MASTER_VOL_STEREO   Line Out
- * AC97_MASTER_VOL_MONO     TAD Output
- * AC97_PCBEEP_VOL          none
- * AC97_PHONE_VOL           TAD Input (mono)
- * AC97_MIC_VOL             MIC Input (mono)
- * AC97_LINEIN_VOL          Line Input (stereo)
- * AC97_CD_VOL              CD Input (stereo)
- * AC97_VIDEO_VOL           none
- * AC97_AUX_VOL             Aux Input (stereo)
- * AC97_PCMOUT_VOL          Wave Output (stereo)
- */
-
-static int es1371_open_mixdev(struct inode *inode, struct file *file)
-{
-	int minor = iminor(inode);
-	struct list_head *list;
-	struct es1371_state *s;
-
-	for (list = devs.next; ; list = list->next) {
-		if (list == &devs)
-			return -ENODEV;
-		s = list_entry(list, struct es1371_state, devs);
-		if (s->codec->dev_mixer == minor)
-			break;
-	}
-       	VALIDATE_STATE(s);
-	file->private_data = s;
-	return nonseekable_open(inode, file);
-}
-
-static int es1371_release_mixdev(struct inode *inode, struct file *file)
-{
-	struct es1371_state *s = (struct es1371_state *)file->private_data;
-	
-	VALIDATE_STATE(s);
-	return 0;
-}
-
-static int es1371_ioctl_mixdev(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
-{
-	struct es1371_state *s = (struct es1371_state *)file->private_data;
-	struct ac97_codec *codec = s->codec;
-
-	return mixdev_ioctl(codec, cmd, arg);
-}
-
-static /*const*/ struct file_operations es1371_mixer_fops = {
-	.owner		= THIS_MODULE,
-	.llseek		= no_llseek,
-	.ioctl		= es1371_ioctl_mixdev,
-	.open		= es1371_open_mixdev,
-	.release	= es1371_release_mixdev,
-};
-
-/* --------------------------------------------------------------------- */
-
-static int drain_dac1(struct es1371_state *s, int nonblock)
-{
-	DECLARE_WAITQUEUE(wait, current);
-	unsigned long flags;
-	int count, tmo;
-	
-	if (s->dma_dac1.mapped || !s->dma_dac1.ready)
-		return 0;
-        add_wait_queue(&s->dma_dac1.wait, &wait);
-        for (;;) {
-		__set_current_state(TASK_INTERRUPTIBLE);
-                spin_lock_irqsave(&s->lock, flags);
-		count = s->dma_dac1.count;
-                spin_unlock_irqrestore(&s->lock, flags);
-		if (count <= 0)
-			break;
-		if (signal_pending(current))
-                        break;
-                if (nonblock) {
-                        remove_wait_queue(&s->dma_dac1.wait, &wait);
-                        set_current_state(TASK_RUNNING);
-                        return -EBUSY;
-                }
-		tmo = 3 * HZ * (count + s->dma_dac1.fragsize) / 2 / s->dac1rate;
-		tmo >>= sample_shift[(s->sctrl & SCTRL_P1FMT) >> SCTRL_SH_P1FMT];
-		if (!schedule_timeout(tmo + 1))
-			DBG(printk(KERN_DEBUG PFX "dac1 dma timed out??\n");)
-        }
-        remove_wait_queue(&s->dma_dac1.wait, &wait);
-        set_current_state(TASK_RUNNING);
-        if (signal_pending(current))
-                return -ERESTARTSYS;
-        return 0;
-}
-
-static int drain_dac2(struct es1371_state *s, int nonblock)
-{
-	DECLARE_WAITQUEUE(wait, current);
-	unsigned long flags;
-	int count, tmo;
-
-	if (s->dma_dac2.mapped || !s->dma_dac2.ready)
-		return 0;
-        add_wait_queue(&s->dma_dac2.wait, &wait);
-        for (;;) {
-		__set_current_state(TASK_UNINTERRUPTIBLE);
-                spin_lock_irqsave(&s->lock, flags);
-		count = s->dma_dac2.count;
-                spin_unlock_irqrestore(&s->lock, flags);
-		if (count <= 0)
-			break;
-		if (signal_pending(current))
-                        break;
-                if (nonblock) {
-                        remove_wait_queue(&s->dma_dac2.wait, &wait);
-                        set_current_state(TASK_RUNNING);
-                        return -EBUSY;
-                }
-		tmo = 3 * HZ * (count + s->dma_dac2.fragsize) / 2 / s->dac2rate;
-		tmo >>= sample_shift[(s->sctrl & SCTRL_P2FMT) >> SCTRL_SH_P2FMT];
-		if (!schedule_timeout(tmo + 1))
-			DBG(printk(KERN_DEBUG PFX "dac2 dma timed out??\n");)
-        }
-        remove_wait_queue(&s->dma_dac2.wait, &wait);
-        set_current_state(TASK_RUNNING);
-        if (signal_pending(current))
-                return -ERESTARTSYS;
-        return 0;
-}
-
-/* --------------------------------------------------------------------- */
-
-static ssize_t es1371_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos)
-{
-	struct es1371_state *s = (struct es1371_state *)file->private_data;
-	DECLARE_WAITQUEUE(wait, current);
-	ssize_t ret = 0;
-	unsigned long flags;
-	unsigned swptr;
-	int cnt;
-
-	VALIDATE_STATE(s);
-	if (s->dma_adc.mapped)
-		return -ENXIO;
-	if (!access_ok(VERIFY_WRITE, buffer, count))
-		return -EFAULT;
-	mutex_lock(&s->sem);
-	if (!s->dma_adc.ready && (ret = prog_dmabuf_adc(s)))
-		goto out2;
-	
-	add_wait_queue(&s->dma_adc.wait, &wait);
-	while (count > 0) {
-		spin_lock_irqsave(&s->lock, flags);
-		swptr = s->dma_adc.swptr;
-		cnt = s->dma_adc.dmasize-swptr;
-		if (s->dma_adc.count < cnt)
-			cnt = s->dma_adc.count;
-		if (cnt <= 0)
-			__set_current_state(TASK_INTERRUPTIBLE);
-		spin_unlock_irqrestore(&s->lock, flags);
-		if (cnt > count)
-			cnt = count;
-		if (cnt <= 0) {
-			if (s->dma_adc.enabled)
-				start_adc(s);
-			if (file->f_flags & O_NONBLOCK) {
-				if (!ret)
-					ret = -EAGAIN;
-				goto out;
-			}
-			mutex_unlock(&s->sem);
-			schedule();
-			if (signal_pending(current)) {
-				if (!ret)
-					ret = -ERESTARTSYS;
-				goto out2;
-			}
-			mutex_lock(&s->sem);
-			if (s->dma_adc.mapped)
-			{
-				ret = -ENXIO;
-				goto out;
-			}
-			continue;
-		}
-		if (copy_to_user(buffer, s->dma_adc.rawbuf + swptr, cnt)) {
-			if (!ret)
-				ret = -EFAULT;
-			goto out;
-		}
-		swptr = (swptr + cnt) % s->dma_adc.dmasize;
-		spin_lock_irqsave(&s->lock, flags);
-		s->dma_adc.swptr = swptr;
-		s->dma_adc.count -= cnt;
-		spin_unlock_irqrestore(&s->lock, flags);
-		count -= cnt;
-		buffer += cnt;
-		ret += cnt;
-		if (s->dma_adc.enabled)
-			start_adc(s);
-	}
-out:
-	mutex_unlock(&s->sem);
-out2:
-	remove_wait_queue(&s->dma_adc.wait, &wait);
-	set_current_state(TASK_RUNNING);
-	return ret;
-}
-
-static ssize_t es1371_write(struct file *file, const char __user *buffer, size_t count, loff_t *ppos)
-{
-	struct es1371_state *s = (struct es1371_state *)file->private_data;
-	DECLARE_WAITQUEUE(wait, current);
-	ssize_t ret;
-	unsigned long flags;
-	unsigned swptr;
-	int cnt;
-
-	VALIDATE_STATE(s);
-	if (s->dma_dac2.mapped)
-		return -ENXIO;
-	if (!access_ok(VERIFY_READ, buffer, count))
-		return -EFAULT;
-	mutex_lock(&s->sem);
-	if (!s->dma_dac2.ready && (ret = prog_dmabuf_dac2(s)))
-		goto out3;
-	ret = 0;
-	add_wait_queue(&s->dma_dac2.wait, &wait);
-	while (count > 0) {
-		spin_lock_irqsave(&s->lock, flags);
-		if (s->dma_dac2.count < 0) {
-			s->dma_dac2.count = 0;
-			s->dma_dac2.swptr = s->dma_dac2.hwptr;
-		}
-		swptr = s->dma_dac2.swptr;
-		cnt = s->dma_dac2.dmasize-swptr;
-		if (s->dma_dac2.count + cnt > s->dma_dac2.dmasize)
-			cnt = s->dma_dac2.dmasize - s->dma_dac2.count;
-		if (cnt <= 0)
-			__set_current_state(TASK_INTERRUPTIBLE);
-		spin_unlock_irqrestore(&s->lock, flags);
-		if (cnt > count)
-			cnt = count;
-		if (cnt <= 0) {
-			if (s->dma_dac2.enabled)
-				start_dac2(s);
-			if (file->f_flags & O_NONBLOCK) {
-				if (!ret)
-					ret = -EAGAIN;
-				goto out;
-			}	
-			mutex_unlock(&s->sem);
-			schedule();
-			if (signal_pending(current)) {
-				if (!ret)
-					ret = -ERESTARTSYS;
-				goto out2;
-			}
-			mutex_lock(&s->sem);
-			if (s->dma_dac2.mapped)
-			{
-				ret = -ENXIO;
-				goto out;
-			}
-			continue;
-		}
-		if (copy_from_user(s->dma_dac2.rawbuf + swptr, buffer, cnt)) {
-			if (!ret)
-				ret = -EFAULT;
-			goto out;
-		}
-		swptr = (swptr + cnt) % s->dma_dac2.dmasize;
-		spin_lock_irqsave(&s->lock, flags);
-		s->dma_dac2.swptr = swptr;
-		s->dma_dac2.count += cnt;
-		s->dma_dac2.endcleared = 0;
-		spin_unlock_irqrestore(&s->lock, flags);
-		count -= cnt;
-		buffer += cnt;
-		ret += cnt;
-		if (s->dma_dac2.enabled)
-			start_dac2(s);
-	}
-out:
-	mutex_unlock(&s->sem);
-out2:
-	remove_wait_queue(&s->dma_dac2.wait, &wait);
-out3:	
-	set_current_state(TASK_RUNNING);
-	return ret;
-}
-
-/* No kernel lock - we have our own spinlock */
-static unsigned int es1371_poll(struct file *file, struct poll_table_struct *wait)
-{
-	struct es1371_state *s = (struct es1371_state *)file->private_data;
-	unsigned long flags;
-	unsigned int mask = 0;
-
-	VALIDATE_STATE(s);
-	if (file->f_mode & FMODE_WRITE) {
-		if (!s->dma_dac2.ready && prog_dmabuf_dac2(s))
-			return 0;
-		poll_wait(file, &s->dma_dac2.wait, wait);
-	}
-	if (file->f_mode & FMODE_READ) {
-		if (!s->dma_adc.ready && prog_dmabuf_adc(s))
-			return 0;
-		poll_wait(file, &s->dma_adc.wait, wait);
-	}
-	spin_lock_irqsave(&s->lock, flags);
-	es1371_update_ptr(s);
-	if (file->f_mode & FMODE_READ) {
-			if (s->dma_adc.count >= (signed)s->dma_adc.fragsize)
-				mask |= POLLIN | POLLRDNORM;
-	}
-	if (file->f_mode & FMODE_WRITE) {
-		if (s->dma_dac2.mapped) {
-			if (s->dma_dac2.count >= (signed)s->dma_dac2.fragsize) 
-				mask |= POLLOUT | POLLWRNORM;
-		} else {
-			if ((signed)s->dma_dac2.dmasize >= s->dma_dac2.count + (signed)s->dma_dac2.fragsize)
-				mask |= POLLOUT | POLLWRNORM;
-		}
-	}
-	spin_unlock_irqrestore(&s->lock, flags);
-	return mask;
-}
-
-static int es1371_mmap(struct file *file, struct vm_area_struct *vma)
-{
-	struct es1371_state *s = (struct es1371_state *)file->private_data;
-	struct dmabuf *db;
-	int ret = 0;
-	unsigned long size;
-
-	VALIDATE_STATE(s);
-	lock_kernel();
-	mutex_lock(&s->sem);
-	
-	if (vma->vm_flags & VM_WRITE) {
-		if ((ret = prog_dmabuf_dac2(s)) != 0) {
-			goto out;
-		}
-		db = &s->dma_dac2;
-	} else if (vma->vm_flags & VM_READ) {
-		if ((ret = prog_dmabuf_adc(s)) != 0) {
-			goto out;
-		}
-		db = &s->dma_adc;
-	} else {
-		ret = -EINVAL;
-		goto out;
-	}
-	if (vma->vm_pgoff != 0) {
-		ret = -EINVAL;
-		goto out;
-	}
-	size = vma->vm_end - vma->vm_start;
-	if (size > (PAGE_SIZE << db->buforder)) {
-		ret = -EINVAL;
-		goto out;
-	}
-	if (remap_pfn_range(vma, vma->vm_start,
-				virt_to_phys(db->rawbuf) >> PAGE_SHIFT,
-				size, vma->vm_page_prot)) {
-		ret = -EAGAIN;
-		goto out;
-	}
-	db->mapped = 1;
-out:
-	mutex_unlock(&s->sem);
-	unlock_kernel();
-	return ret;
-}
-
-static int es1371_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
-{
-	struct es1371_state *s = (struct es1371_state *)file->private_data;
-	unsigned long flags;
-        audio_buf_info abinfo;
-        count_info cinfo;
-	int count;
-	int val, mapped, ret;
-	void __user *argp = (void __user *)arg;
-	int __user *p = argp;
-
-	VALIDATE_STATE(s);
-        mapped = ((file->f_mode & FMODE_WRITE) && s->dma_dac2.mapped) ||
-		((file->f_mode & FMODE_READ) && s->dma_adc.mapped);
-	switch (cmd) {
-	case OSS_GETVERSION:
-		return put_user(SOUND_VERSION, p);
-
-	case SNDCTL_DSP_SYNC:
-		if (file->f_mode & FMODE_WRITE)
-			return drain_dac2(s, 0/*file->f_flags & O_NONBLOCK*/);
-		return 0;
-		
-	case SNDCTL_DSP_SETDUPLEX:
-		return 0;
-
-	case SNDCTL_DSP_GETCAPS:
-		return put_user(DSP_CAP_DUPLEX | DSP_CAP_REALTIME | DSP_CAP_TRIGGER | DSP_CAP_MMAP, p);
-		
-        case SNDCTL_DSP_RESET:
-		if (file->f_mode & FMODE_WRITE) {
-			stop_dac2(s);
-			synchronize_irq(s->irq);
-			s->dma_dac2.swptr = s->dma_dac2.hwptr = s->dma_dac2.count = s->dma_dac2.total_bytes = 0;
-		}
-		if (file->f_mode & FMODE_READ) {
-			stop_adc(s);
-			synchronize_irq(s->irq);
-			s->dma_adc.swptr = s->dma_adc.hwptr = s->dma_adc.count = s->dma_adc.total_bytes = 0;
-		}
-		return 0;
-
-        case SNDCTL_DSP_SPEED:
-                if (get_user(val, p))
-			return -EFAULT;
-		if (val >= 0) {
-			if (file->f_mode & FMODE_READ) {
-				stop_adc(s);
-				s->dma_adc.ready = 0;
-				set_adc_rate(s, val);
-			}
-			if (file->f_mode & FMODE_WRITE) {
-				stop_dac2(s);
-				s->dma_dac2.ready = 0;
-				set_dac2_rate(s, val);
-			}
-		}
-		return put_user((file->f_mode & FMODE_READ) ? s->adcrate : s->dac2rate, p);
-
-        case SNDCTL_DSP_STEREO:
-		if (get_user(val, p))
-			return -EFAULT;
-		if (file->f_mode & FMODE_READ) {
-			stop_adc(s);
-			s->dma_adc.ready = 0;
-			spin_lock_irqsave(&s->lock, flags);
-			if (val)
-				s->sctrl |= SCTRL_R1SMB;
-			else
-				s->sctrl &= ~SCTRL_R1SMB;
-			outl(s->sctrl, s->io+ES1371_REG_SERIAL_CONTROL);
-			spin_unlock_irqrestore(&s->lock, flags);
-		}
-		if (file->f_mode & FMODE_WRITE) {
-			stop_dac2(s);
-			s->dma_dac2.ready = 0;
-			spin_lock_irqsave(&s->lock, flags);
-			if (val)
-				s->sctrl |= SCTRL_P2SMB;
-			else
-				s->sctrl &= ~SCTRL_P2SMB;
-			outl(s->sctrl, s->io+ES1371_REG_SERIAL_CONTROL);
-			spin_unlock_irqrestore(&s->lock, flags);
-                }
-		return 0;
-
-        case SNDCTL_DSP_CHANNELS:
-                if (get_user(val, p))
-			return -EFAULT;
-		if (val != 0) {
-			if (file->f_mode & FMODE_READ) {
-				stop_adc(s);
-				s->dma_adc.ready = 0;
-				spin_lock_irqsave(&s->lock, flags);
-				if (val >= 2)
-					s->sctrl |= SCTRL_R1SMB;
-				else
-					s->sctrl &= ~SCTRL_R1SMB;
-				outl(s->sctrl, s->io+ES1371_REG_SERIAL_CONTROL);
-				spin_unlock_irqrestore(&s->lock, flags);
-			}
-			if (file->f_mode & FMODE_WRITE) {
-				stop_dac2(s);
-				s->dma_dac2.ready = 0;
-				spin_lock_irqsave(&s->lock, flags);
-				if (val >= 2)
-					s->sctrl |= SCTRL_P2SMB;
-				else
-					s->sctrl &= ~SCTRL_P2SMB;
-				outl(s->sctrl, s->io+ES1371_REG_SERIAL_CONTROL);
-				spin_unlock_irqrestore(&s->lock, flags);
-			}
-		}
-		return put_user((s->sctrl & ((file->f_mode & FMODE_READ) ? SCTRL_R1SMB : SCTRL_P2SMB)) ? 2 : 1, p);
-		
-	case SNDCTL_DSP_GETFMTS: /* Returns a mask */
-                return put_user(AFMT_S16_LE|AFMT_U8, p);
-		
-	case SNDCTL_DSP_SETFMT: /* Selects ONE fmt*/
-		if (get_user(val, p))
-			return -EFAULT;
-		if (val != AFMT_QUERY) {
-			if (file->f_mode & FMODE_READ) {
-				stop_adc(s);
-				s->dma_adc.ready = 0;
-				spin_lock_irqsave(&s->lock, flags);
-				if (val == AFMT_S16_LE)
-					s->sctrl |= SCTRL_R1SEB;
-				else
-					s->sctrl &= ~SCTRL_R1SEB;
-				outl(s->sctrl, s->io+ES1371_REG_SERIAL_CONTROL);
-				spin_unlock_irqrestore(&s->lock, flags);
-			}
-			if (file->f_mode & FMODE_WRITE) {
-				stop_dac2(s);
-				s->dma_dac2.ready = 0;
-				spin_lock_irqsave(&s->lock, flags);
-				if (val == AFMT_S16_LE)
-					s->sctrl |= SCTRL_P2SEB;
-				else
-					s->sctrl &= ~SCTRL_P2SEB;
-				outl(s->sctrl, s->io+ES1371_REG_SERIAL_CONTROL);
-				spin_unlock_irqrestore(&s->lock, flags);
-			}
-		}
-		return put_user((s->sctrl & ((file->f_mode & FMODE_READ) ? SCTRL_R1SEB : SCTRL_P2SEB)) ? 
-				AFMT_S16_LE : AFMT_U8, p);
-		
-	case SNDCTL_DSP_POST:
-                return 0;
-
-        case SNDCTL_DSP_GETTRIGGER:
-		val = 0;
-		if (file->f_mode & FMODE_READ && s->ctrl & CTRL_ADC_EN) 
-			val |= PCM_ENABLE_INPUT;
-		if (file->f_mode & FMODE_WRITE && s->ctrl & CTRL_DAC2_EN) 
-			val |= PCM_ENABLE_OUTPUT;
-		return put_user(val, p);
-		
-	case SNDCTL_DSP_SETTRIGGER:
-		if (get_user(val, p))
-			return -EFAULT;
-		if (file->f_mode & FMODE_READ) {
-			if (val & PCM_ENABLE_INPUT) {
-				if (!s->dma_adc.ready && (ret = prog_dmabuf_adc(s)))
-					return ret;
-				s->dma_adc.enabled = 1;
-				start_adc(s);
-			} else {
-				s->dma_adc.enabled = 0;
-				stop_adc(s);
-			}
-		}
-		if (file->f_mode & FMODE_WRITE) {
-			if (val & PCM_ENABLE_OUTPUT) {
-				if (!s->dma_dac2.ready && (ret = prog_dmabuf_dac2(s)))
-					return ret;
-				s->dma_dac2.enabled = 1;
-				start_dac2(s);
-			} else {
-				s->dma_dac2.enabled = 0;
-				stop_dac2(s);
-			}
-		}
-		return 0;
-
-	case SNDCTL_DSP_GETOSPACE:
-		if (!(file->f_mode & FMODE_WRITE))
-			return -EINVAL;
-		if (!s->dma_dac2.ready && (val = prog_dmabuf_dac2(s)) != 0)
-			return val;
-		spin_lock_irqsave(&s->lock, flags);
-		es1371_update_ptr(s);
-		abinfo.fragsize = s->dma_dac2.fragsize;
-		count = s->dma_dac2.count;
-		if (count < 0)
-			count = 0;
-                abinfo.bytes = s->dma_dac2.dmasize - count;
-                abinfo.fragstotal = s->dma_dac2.numfrag;
-                abinfo.fragments = abinfo.bytes >> s->dma_dac2.fragshift;      
-		spin_unlock_irqrestore(&s->lock, flags);
-		return copy_to_user(argp, &abinfo, sizeof(abinfo)) ? -EFAULT : 0;
-
-	case SNDCTL_DSP_GETISPACE:
-		if (!(file->f_mode & FMODE_READ))
-			return -EINVAL;
-		if (!s->dma_adc.ready && (val = prog_dmabuf_adc(s)) != 0)
-			return val;
-		spin_lock_irqsave(&s->lock, flags);
-		es1371_update_ptr(s);
-		abinfo.fragsize = s->dma_adc.fragsize;
-		count = s->dma_adc.count;
-		if (count < 0)
-			count = 0;
-                abinfo.bytes = count;
-                abinfo.fragstotal = s->dma_adc.numfrag;
-                abinfo.fragments = abinfo.bytes >> s->dma_adc.fragshift;      
-		spin_unlock_irqrestore(&s->lock, flags);
-		return copy_to_user(argp, &abinfo, sizeof(abinfo)) ? -EFAULT : 0;
-		
-        case SNDCTL_DSP_NONBLOCK:
-                file->f_flags |= O_NONBLOCK;
-                return 0;
-
-        case SNDCTL_DSP_GETODELAY:
-		if (!(file->f_mode & FMODE_WRITE))
-			return -EINVAL;
-		if (!s->dma_dac2.ready && (val = prog_dmabuf_dac2(s)) != 0)
-			return val;
-		spin_lock_irqsave(&s->lock, flags);
-		es1371_update_ptr(s);
-                count = s->dma_dac2.count;
-		spin_unlock_irqrestore(&s->lock, flags);
-		if (count < 0)
-			count = 0;
-		return put_user(count, p);
-
-        case SNDCTL_DSP_GETIPTR:
-		if (!(file->f_mode & FMODE_READ))
-			return -EINVAL;
-		if (!s->dma_adc.ready && (val = prog_dmabuf_adc(s)) != 0)
-			return val;
-		spin_lock_irqsave(&s->lock, flags);
-		es1371_update_ptr(s);
-                cinfo.bytes = s->dma_adc.total_bytes;
-		count = s->dma_adc.count;
-		if (count < 0)
-			count = 0;
-                cinfo.blocks = count >> s->dma_adc.fragshift;
-                cinfo.ptr = s->dma_adc.hwptr;
-		if (s->dma_adc.mapped)
-			s->dma_adc.count &= s->dma_adc.fragsize-1;
-		spin_unlock_irqrestore(&s->lock, flags);
-		if (copy_to_user(argp, &cinfo, sizeof(cinfo)))
-			return -EFAULT;
-		return 0;
-
-        case SNDCTL_DSP_GETOPTR:
-		if (!(file->f_mode & FMODE_WRITE))
-			return -EINVAL;
-		if (!s->dma_dac2.ready && (val = prog_dmabuf_dac2(s)) != 0)
-			return val;
-		spin_lock_irqsave(&s->lock, flags);
-		es1371_update_ptr(s);
-                cinfo.bytes = s->dma_dac2.total_bytes;
-		count = s->dma_dac2.count;
-		if (count < 0)
-			count = 0;
-                cinfo.blocks = count >> s->dma_dac2.fragshift;
-                cinfo.ptr = s->dma_dac2.hwptr;
-		if (s->dma_dac2.mapped)
-			s->dma_dac2.count &= s->dma_dac2.fragsize-1;
-		spin_unlock_irqrestore(&s->lock, flags);
-		if (copy_to_user(argp, &cinfo, sizeof(cinfo)))
-			return -EFAULT;
-		return 0;
-
-        case SNDCTL_DSP_GETBLKSIZE:
-		if (file->f_mode & FMODE_WRITE) {
-			if ((val = prog_dmabuf_dac2(s)))
-				return val;
-			return put_user(s->dma_dac2.fragsize, p);
-		}
-		if ((val = prog_dmabuf_adc(s)))
-			return val;
-		return put_user(s->dma_adc.fragsize, p);
-
-        case SNDCTL_DSP_SETFRAGMENT:
-                if (get_user(val, p))
-			return -EFAULT;
-		if (file->f_mode & FMODE_READ) {
-			s->dma_adc.ossfragshift = val & 0xffff;
-			s->dma_adc.ossmaxfrags = (val >> 16) & 0xffff;
-			if (s->dma_adc.ossfragshift < 4)
-				s->dma_adc.ossfragshift = 4;
-			if (s->dma_adc.ossfragshift > 15)
-				s->dma_adc.ossfragshift = 15;
-			if (s->dma_adc.ossmaxfrags < 4)
-				s->dma_adc.ossmaxfrags = 4;
-		}
-		if (file->f_mode & FMODE_WRITE) {
-			s->dma_dac2.ossfragshift = val & 0xffff;
-			s->dma_dac2.ossmaxfrags = (val >> 16) & 0xffff;
-			if (s->dma_dac2.ossfragshift < 4)
-				s->dma_dac2.ossfragshift = 4;
-			if (s->dma_dac2.ossfragshift > 15)
-				s->dma_dac2.ossfragshift = 15;
-			if (s->dma_dac2.ossmaxfrags < 4)
-				s->dma_dac2.ossmaxfrags = 4;
-		}
-		return 0;
-
-        case SNDCTL_DSP_SUBDIVIDE:
-		if ((file->f_mode & FMODE_READ && s->dma_adc.subdivision) ||
-		    (file->f_mode & FMODE_WRITE && s->dma_dac2.subdivision))
-			return -EINVAL;
-                if (get_user(val, p))
-			return -EFAULT;
-		if (val != 1 && val != 2 && val != 4)
-			return -EINVAL;
-		if (file->f_mode & FMODE_READ)
-			s->dma_adc.subdivision = val;
-		if (file->f_mode & FMODE_WRITE)
-			s->dma_dac2.subdivision = val;
-		return 0;
-
-        case SOUND_PCM_READ_RATE:
-		return put_user((file->f_mode & FMODE_READ) ? s->adcrate : s->dac2rate, p);
-
-        case SOUND_PCM_READ_CHANNELS:
-		return put_user((s->sctrl & ((file->f_mode & FMODE_READ) ? SCTRL_R1SMB : SCTRL_P2SMB)) ? 2 : 1, p);
-		
-        case SOUND_PCM_READ_BITS:
-		return put_user((s->sctrl & ((file->f_mode & FMODE_READ) ? SCTRL_R1SEB : SCTRL_P2SEB)) ? 16 : 8, p);
-
-        case SOUND_PCM_WRITE_FILTER:
-        case SNDCTL_DSP_SETSYNCRO:
-        case SOUND_PCM_READ_FILTER:
-                return -EINVAL;
-		
-	}
-	return mixdev_ioctl(s->codec, cmd, arg);
-}
-
-static int es1371_open(struct inode *inode, struct file *file)
-{
-	int minor = iminor(inode);
-	DECLARE_WAITQUEUE(wait, current);
-	unsigned long flags;
-	struct list_head *list;
-	struct es1371_state *s;
-
-	for (list = devs.next; ; list = list->next) {
-		if (list == &devs)
-			return -ENODEV;
-		s = list_entry(list, struct es1371_state, devs);
-		if (!((s->dev_audio ^ minor) & ~0xf))
-			break;
-	}
-       	VALIDATE_STATE(s);
-	file->private_data = s;
-	/* wait for device to become free */
-	mutex_lock(&s->open_mutex);
-	while (s->open_mode & file->f_mode) {
-		if (file->f_flags & O_NONBLOCK) {
-			mutex_unlock(&s->open_mutex);
-			return -EBUSY;
-		}
-		add_wait_queue(&s->open_wait, &wait);
-		__set_current_state(TASK_INTERRUPTIBLE);
-		mutex_unlock(&s->open_mutex);
-		schedule();
-		remove_wait_queue(&s->open_wait, &wait);
-		set_current_state(TASK_RUNNING);
-		if (signal_pending(current))
-			return -ERESTARTSYS;
-		mutex_lock(&s->open_mutex);
-	}
-	if (file->f_mode & FMODE_READ) {
-		s->dma_adc.ossfragshift = s->dma_adc.ossmaxfrags = s->dma_adc.subdivision = 0;
-		s->dma_adc.enabled = 1;
-		set_adc_rate(s, 8000);
-	}
-	if (file->f_mode & FMODE_WRITE) {
-		s->dma_dac2.ossfragshift = s->dma_dac2.ossmaxfrags = s->dma_dac2.subdivision = 0;
-		s->dma_dac2.enabled = 1;
-		set_dac2_rate(s, 8000);
-	}
-	spin_lock_irqsave(&s->lock, flags);
-	if (file->f_mode & FMODE_READ) {
-		s->sctrl &= ~SCTRL_R1FMT;
-		if ((minor & 0xf) == SND_DEV_DSP16)
-			s->sctrl |= ES1371_FMT_S16_MONO << SCTRL_SH_R1FMT;
-		else
-			s->sctrl |= ES1371_FMT_U8_MONO << SCTRL_SH_R1FMT;
-	}
-	if (file->f_mode & FMODE_WRITE) {
-		s->sctrl &= ~SCTRL_P2FMT;
-		if ((minor & 0xf) == SND_DEV_DSP16)
-			s->sctrl |= ES1371_FMT_S16_MONO << SCTRL_SH_P2FMT;
-		else
-			s->sctrl |= ES1371_FMT_U8_MONO << SCTRL_SH_P2FMT;
-	}
-	outl(s->sctrl, s->io+ES1371_REG_SERIAL_CONTROL);
-	spin_unlock_irqrestore(&s->lock, flags);
-	s->open_mode |= file->f_mode & (FMODE_READ | FMODE_WRITE);
-	mutex_unlock(&s->open_mutex);
-	mutex_init(&s->sem);
-	return nonseekable_open(inode, file);
-}
-
-static int es1371_release(struct inode *inode, struct file *file)
-{
-	struct es1371_state *s = (struct es1371_state *)file->private_data;
-
-	VALIDATE_STATE(s);
-	lock_kernel();
-	if (file->f_mode & FMODE_WRITE)
-		drain_dac2(s, file->f_flags & O_NONBLOCK);
-	mutex_lock(&s->open_mutex);
-	if (file->f_mode & FMODE_WRITE) {
-		stop_dac2(s);
-		dealloc_dmabuf(s, &s->dma_dac2);
-	}
-	if (file->f_mode & FMODE_READ) {
-		stop_adc(s);
-		dealloc_dmabuf(s, &s->dma_adc);
-	}
-	s->open_mode &= ~(file->f_mode & (FMODE_READ|FMODE_WRITE));
-	mutex_unlock(&s->open_mutex);
-	wake_up(&s->open_wait);
-	unlock_kernel();
-	return 0;
-}
-
-static /*const*/ struct file_operations es1371_audio_fops = {
-	.owner		= THIS_MODULE,
-	.llseek		= no_llseek,
-	.read		= es1371_read,
-	.write		= es1371_write,
-	.poll		= es1371_poll,
-	.ioctl		= es1371_ioctl,
-	.mmap		= es1371_mmap,
-	.open		= es1371_open,
-	.release	= es1371_release,
-};
-
-/* --------------------------------------------------------------------- */
-
-static ssize_t es1371_write_dac(struct file *file, const char __user *buffer, size_t count, loff_t *ppos)
-{
-	struct es1371_state *s = (struct es1371_state *)file->private_data;
-	DECLARE_WAITQUEUE(wait, current);
-	ssize_t ret = 0;
-	unsigned long flags;
-	unsigned swptr;
-	int cnt;
-
-	VALIDATE_STATE(s);
-	if (s->dma_dac1.mapped)
-		return -ENXIO;
-	if (!s->dma_dac1.ready && (ret = prog_dmabuf_dac1(s)))
-		return ret;
-	if (!access_ok(VERIFY_READ, buffer, count))
-		return -EFAULT;
-	add_wait_queue(&s->dma_dac1.wait, &wait);
-	while (count > 0) {
-		spin_lock_irqsave(&s->lock, flags);
-		if (s->dma_dac1.count < 0) {
-			s->dma_dac1.count = 0;
-			s->dma_dac1.swptr = s->dma_dac1.hwptr;
-		}
-		swptr = s->dma_dac1.swptr;
-		cnt = s->dma_dac1.dmasize-swptr;
-		if (s->dma_dac1.count + cnt > s->dma_dac1.dmasize)
-			cnt = s->dma_dac1.dmasize - s->dma_dac1.count;
-		if (cnt <= 0)
-			__set_current_state(TASK_INTERRUPTIBLE);
-		spin_unlock_irqrestore(&s->lock, flags);
-		if (cnt > count)
-			cnt = count;
-		if (cnt <= 0) {
-			if (s->dma_dac1.enabled)
-				start_dac1(s);
-			if (file->f_flags & O_NONBLOCK) {
-				if (!ret)
-					ret = -EAGAIN;
-				break;
-			}
-			schedule();
-			if (signal_pending(current)) {
-				if (!ret)
-					ret = -ERESTARTSYS;
-				break;
-			}
-			continue;
-		}
-		if (copy_from_user(s->dma_dac1.rawbuf + swptr, buffer, cnt)) {
-			if (!ret)
-				ret = -EFAULT;
-			break;
-		}
-		swptr = (swptr + cnt) % s->dma_dac1.dmasize;
-		spin_lock_irqsave(&s->lock, flags);
-		s->dma_dac1.swptr = swptr;
-		s->dma_dac1.count += cnt;
-		s->dma_dac1.endcleared = 0;
-		spin_unlock_irqrestore(&s->lock, flags);
-		count -= cnt;
-		buffer += cnt;
-		ret += cnt;
-		if (s->dma_dac1.enabled)
-			start_dac1(s);
-	}
-	remove_wait_queue(&s->dma_dac1.wait, &wait);
-	set_current_state(TASK_RUNNING);
-	return ret;
-}
-
-/* No kernel lock - we have our own spinlock */
-static unsigned int es1371_poll_dac(struct file *file, struct poll_table_struct *wait)
-{
-	struct es1371_state *s = (struct es1371_state *)file->private_data;
-	unsigned long flags;
-	unsigned int mask = 0;
-
-	VALIDATE_STATE(s);
-	if (!s->dma_dac1.ready && prog_dmabuf_dac1(s))
-		return 0;
-	poll_wait(file, &s->dma_dac1.wait, wait);
-	spin_lock_irqsave(&s->lock, flags);
-	es1371_update_ptr(s);
-	if (s->dma_dac1.mapped) {
-		if (s->dma_dac1.count >= (signed)s->dma_dac1.fragsize)
-			mask |= POLLOUT | POLLWRNORM;
-	} else {
-		if ((signed)s->dma_dac1.dmasize >= s->dma_dac1.count + (signed)s->dma_dac1.fragsize)
-			mask |= POLLOUT | POLLWRNORM;
-	}
-	spin_unlock_irqrestore(&s->lock, flags);
-	return mask;
-}
-
-static int es1371_mmap_dac(struct file *file, struct vm_area_struct *vma)
-{
-	struct es1371_state *s = (struct es1371_state *)file->private_data;
-	int ret;
-	unsigned long size;
-
-	VALIDATE_STATE(s);
-	if (!(vma->vm_flags & VM_WRITE))
-		return -EINVAL;
-	lock_kernel();
-	if ((ret = prog_dmabuf_dac1(s)) != 0)
-		goto out;
-	ret = -EINVAL;
-	if (vma->vm_pgoff != 0)
-		goto out;
-	size = vma->vm_end - vma->vm_start;
-	if (size > (PAGE_SIZE << s->dma_dac1.buforder))
-		goto out;
-	ret = -EAGAIN;
-	if (remap_pfn_range(vma, vma->vm_start,
-			virt_to_phys(s->dma_dac1.rawbuf) >> PAGE_SHIFT,
-			size, vma->vm_page_prot))
-		goto out;
-	s->dma_dac1.mapped = 1;
-	ret = 0;
-out:
-	unlock_kernel();
-	return ret;
-}
-
-static int es1371_ioctl_dac(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
-{
-	struct es1371_state *s = (struct es1371_state *)file->private_data;
-	unsigned long flags;
-        audio_buf_info abinfo;
-        count_info cinfo;
-	int count;
-	int val, ret;
-	int __user *p = (int __user *)arg;
-
-	VALIDATE_STATE(s);
-	switch (cmd) {
-	case OSS_GETVERSION:
-		return put_user(SOUND_VERSION, p);
-
-	case SNDCTL_DSP_SYNC:
-		return drain_dac1(s, 0/*file->f_flags & O_NONBLOCK*/);
-		
-	case SNDCTL_DSP_SETDUPLEX:
-		return -EINVAL;
-
-	case SNDCTL_DSP_GETCAPS:
-		return put_user(DSP_CAP_REALTIME | DSP_CAP_TRIGGER | DSP_CAP_MMAP, p);
-		
-        case SNDCTL_DSP_RESET:
-		stop_dac1(s);
-		synchronize_irq(s->irq);
-		s->dma_dac1.swptr = s->dma_dac1.hwptr = s->dma_dac1.count = s->dma_dac1.total_bytes = 0;
-		return 0;
-
-        case SNDCTL_DSP_SPEED:
-                if (get_user(val, p))
-			return -EFAULT;
-		if (val >= 0) {
-			stop_dac1(s);
-			s->dma_dac1.ready = 0;
-			set_dac1_rate(s, val);
-		}
-		return put_user(s->dac1rate, p);
-
-        case SNDCTL_DSP_STEREO:
-		if (get_user(val, p))
-			return -EFAULT;
-		stop_dac1(s);
-		s->dma_dac1.ready = 0;
-		spin_lock_irqsave(&s->lock, flags);
-		if (val)
-			s->sctrl |= SCTRL_P1SMB;
-		else
-			s->sctrl &= ~SCTRL_P1SMB;
-		outl(s->sctrl, s->io+ES1371_REG_SERIAL_CONTROL);
-		spin_unlock_irqrestore(&s->lock, flags);
-		return 0;
-
-        case SNDCTL_DSP_CHANNELS:
-                if (get_user(val, p))
-			return -EFAULT;
-		if (val != 0) {
-			stop_dac1(s);
-			s->dma_dac1.ready = 0;
-			spin_lock_irqsave(&s->lock, flags);
-			if (val >= 2)
-				s->sctrl |= SCTRL_P1SMB;
-			else
-				s->sctrl &= ~SCTRL_P1SMB;
-			outl(s->sctrl, s->io+ES1371_REG_SERIAL_CONTROL);
-			spin_unlock_irqrestore(&s->lock, flags);
-		}
-		return put_user((s->sctrl & SCTRL_P1SMB) ? 2 : 1, p);
-		
-        case SNDCTL_DSP_GETFMTS: /* Returns a mask */
-                return put_user(AFMT_S16_LE|AFMT_U8, p);
-		
-        case SNDCTL_DSP_SETFMT: /* Selects ONE fmt*/
-		if (get_user(val, p))
-			return -EFAULT;
-		if (val != AFMT_QUERY) {
-			stop_dac1(s);
-			s->dma_dac1.ready = 0;
-			spin_lock_irqsave(&s->lock, flags);
-			if (val == AFMT_S16_LE)
-				s->sctrl |= SCTRL_P1SEB;
-			else
-				s->sctrl &= ~SCTRL_P1SEB;
-			outl(s->sctrl, s->io+ES1371_REG_SERIAL_CONTROL);
-			spin_unlock_irqrestore(&s->lock, flags);
-		}
-		return put_user((s->sctrl & SCTRL_P1SEB) ? AFMT_S16_LE : AFMT_U8, p);
-
-        case SNDCTL_DSP_POST:
-                return 0;
-
-        case SNDCTL_DSP_GETTRIGGER:
-		return put_user((s->ctrl & CTRL_DAC1_EN) ? PCM_ENABLE_OUTPUT : 0, p);
-						
-	case SNDCTL_DSP_SETTRIGGER:
-		if (get_user(val, p))
-			return -EFAULT;
-		if (val & PCM_ENABLE_OUTPUT) {
-			if (!s->dma_dac1.ready && (ret = prog_dmabuf_dac1(s)))
-				return ret;
-			s->dma_dac1.enabled = 1;
-			start_dac1(s);
-		} else {
-			s->dma_dac1.enabled = 0;
-			stop_dac1(s);
-		}
-		return 0;
-
-	case SNDCTL_DSP_GETOSPACE:
-		if (!s->dma_dac1.ready && (val = prog_dmabuf_dac1(s)) != 0)
-			return val;
-		spin_lock_irqsave(&s->lock, flags);
-		es1371_update_ptr(s);
-		abinfo.fragsize = s->dma_dac1.fragsize;
-		count = s->dma_dac1.count;
-		if (count < 0)
-			count = 0;
-                abinfo.bytes = s->dma_dac1.dmasize - count;
-                abinfo.fragstotal = s->dma_dac1.numfrag;
-                abinfo.fragments = abinfo.bytes >> s->dma_dac1.fragshift;      
-		spin_unlock_irqrestore(&s->lock, flags);
-		return copy_to_user((void __user *)arg, &abinfo, sizeof(abinfo)) ? -EFAULT : 0;
-
-        case SNDCTL_DSP_NONBLOCK:
-                file->f_flags |= O_NONBLOCK;
-                return 0;
-
-        case SNDCTL_DSP_GETODELAY:
-		if (!s->dma_dac1.ready && (val = prog_dmabuf_dac1(s)) != 0)
-			return val;
-		spin_lock_irqsave(&s->lock, flags);
-		es1371_update_ptr(s);
-                count = s->dma_dac1.count;
-		spin_unlock_irqrestore(&s->lock, flags);
-		if (count < 0)
-			count = 0;
-		return put_user(count, p);
-
-        case SNDCTL_DSP_GETOPTR:
-		if (!s->dma_dac1.ready && (val = prog_dmabuf_dac1(s)) != 0)
-			return val;
-		spin_lock_irqsave(&s->lock, flags);
-		es1371_update_ptr(s);
-                cinfo.bytes = s->dma_dac1.total_bytes;
-		count = s->dma_dac1.count;
-		if (count < 0)
-			count = 0;
-                cinfo.blocks = count >> s->dma_dac1.fragshift;
-                cinfo.ptr = s->dma_dac1.hwptr;
-		if (s->dma_dac1.mapped)
-			s->dma_dac1.count &= s->dma_dac1.fragsize-1;
-		spin_unlock_irqrestore(&s->lock, flags);
-		if (copy_to_user((void __user *)arg, &cinfo, sizeof(cinfo)))
-			return -EFAULT;
-		return 0;
-
-        case SNDCTL_DSP_GETBLKSIZE:
-		if ((val = prog_dmabuf_dac1(s)))
-			return val;
-                return put_user(s->dma_dac1.fragsize, p);
-
-        case SNDCTL_DSP_SETFRAGMENT:
-                if (get_user(val, p))
-			return -EFAULT;
-		s->dma_dac1.ossfragshift = val & 0xffff;
-		s->dma_dac1.ossmaxfrags = (val >> 16) & 0xffff;
-		if (s->dma_dac1.ossfragshift < 4)
-			s->dma_dac1.ossfragshift = 4;
-		if (s->dma_dac1.ossfragshift > 15)
-			s->dma_dac1.ossfragshift = 15;
-		if (s->dma_dac1.ossmaxfrags < 4)
-			s->dma_dac1.ossmaxfrags = 4;
-		return 0;
-
-        case SNDCTL_DSP_SUBDIVIDE:
-		if (s->dma_dac1.subdivision)
-			return -EINVAL;
-                if (get_user(val, p))
-			return -EFAULT;
-		if (val != 1 && val != 2 && val != 4)
-			return -EINVAL;
-		s->dma_dac1.subdivision = val;
-		return 0;
-
-        case SOUND_PCM_READ_RATE:
-		return put_user(s->dac1rate, p);
-
-        case SOUND_PCM_READ_CHANNELS:
-		return put_user((s->sctrl & SCTRL_P1SMB) ? 2 : 1, p);
-
-        case SOUND_PCM_READ_BITS:
-		return put_user((s->sctrl & SCTRL_P1SEB) ? 16 : 8, p);
-
-        case SOUND_PCM_WRITE_FILTER:
-        case SNDCTL_DSP_SETSYNCRO:
-        case SOUND_PCM_READ_FILTER:
-                return -EINVAL;
-		
-	}
-	return mixdev_ioctl(s->codec, cmd, arg);
-}
-
-static int es1371_open_dac(struct inode *inode, struct file *file)
-{
-	int minor = iminor(inode);
-	DECLARE_WAITQUEUE(wait, current);
-	unsigned long flags;
-	struct list_head *list;
-	struct es1371_state *s;
-
-	for (list = devs.next; ; list = list->next) {
-		if (list == &devs)
-			return -ENODEV;
-		s = list_entry(list, struct es1371_state, devs);
-		if (!((s->dev_dac ^ minor) & ~0xf))
-			break;
-	}
-       	VALIDATE_STATE(s);
-       	/* we allow opening with O_RDWR, most programs do it although they will only write */
-#if 0
-	if (file->f_mode & FMODE_READ)
-		return -EPERM;
-#endif
-	if (!(file->f_mode & FMODE_WRITE))
-		return -EINVAL;
-       	file->private_data = s;
-	/* wait for device to become free */
-	mutex_lock(&s->open_mutex);
-	while (s->open_mode & FMODE_DAC) {
-		if (file->f_flags & O_NONBLOCK) {
-			mutex_unlock(&s->open_mutex);
-			return -EBUSY;
-		}
-		add_wait_queue(&s->open_wait, &wait);
-		__set_current_state(TASK_INTERRUPTIBLE);
-		mutex_unlock(&s->open_mutex);
-		schedule();
-		remove_wait_queue(&s->open_wait, &wait);
-		set_current_state(TASK_RUNNING);
-		if (signal_pending(current))
-			return -ERESTARTSYS;
-		mutex_lock(&s->open_mutex);
-	}
-	s->dma_dac1.ossfragshift = s->dma_dac1.ossmaxfrags = s->dma_dac1.subdivision = 0;
-	s->dma_dac1.enabled = 1;
-	set_dac1_rate(s, 8000);
-	spin_lock_irqsave(&s->lock, flags);
-	s->sctrl &= ~SCTRL_P1FMT;
-	if ((minor & 0xf) == SND_DEV_DSP16)
-		s->sctrl |= ES1371_FMT_S16_MONO << SCTRL_SH_P1FMT;
-	else
-		s->sctrl |= ES1371_FMT_U8_MONO << SCTRL_SH_P1FMT;
-	outl(s->sctrl, s->io+ES1371_REG_SERIAL_CONTROL);
-	spin_unlock_irqrestore(&s->lock, flags);
-	s->open_mode |= FMODE_DAC;
-	mutex_unlock(&s->open_mutex);
-	return nonseekable_open(inode, file);
-}
-
-static int es1371_release_dac(struct inode *inode, struct file *file)
-{
-	struct es1371_state *s = (struct es1371_state *)file->private_data;
-
-	VALIDATE_STATE(s);
-	lock_kernel();
-	drain_dac1(s, file->f_flags & O_NONBLOCK);
-	mutex_lock(&s->open_mutex);
-	stop_dac1(s);
-	dealloc_dmabuf(s, &s->dma_dac1);
-	s->open_mode &= ~FMODE_DAC;
-	mutex_unlock(&s->open_mutex);
-	wake_up(&s->open_wait);
-	unlock_kernel();
-	return 0;
-}
-
-static /*const*/ struct file_operations es1371_dac_fops = {
-	.owner		= THIS_MODULE,
-	.llseek		= no_llseek,
-	.write		= es1371_write_dac,
-	.poll		= es1371_poll_dac,
-	.ioctl		= es1371_ioctl_dac,
-	.mmap		= es1371_mmap_dac,
-	.open		= es1371_open_dac,
-	.release	= es1371_release_dac,
-};
-
-/* --------------------------------------------------------------------- */
-
-static ssize_t es1371_midi_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos)
-{
-	struct es1371_state *s = (struct es1371_state *)file->private_data;
-	DECLARE_WAITQUEUE(wait, current);
-	ssize_t ret;
-	unsigned long flags;
-	unsigned ptr;
-	int cnt;
-
-	VALIDATE_STATE(s);
-	if (!access_ok(VERIFY_WRITE, buffer, count))
-		return -EFAULT;
-	if (count == 0)
-		return 0;
-	ret = 0;
-        add_wait_queue(&s->midi.iwait, &wait);
-	while (count > 0) {
-		spin_lock_irqsave(&s->lock, flags);
-		ptr = s->midi.ird;
-		cnt = MIDIINBUF - ptr;
-		if (s->midi.icnt < cnt)
-			cnt = s->midi.icnt;
-		if (cnt <= 0)
-			__set_current_state(TASK_INTERRUPTIBLE);
-		spin_unlock_irqrestore(&s->lock, flags);
-		if (cnt > count)
-			cnt = count;
-		if (cnt <= 0) {
-			if (file->f_flags & O_NONBLOCK) {
-				if (!ret)
-					ret = -EAGAIN;
-				break;
-			}
-			schedule();
-			if (signal_pending(current)) {
-				if (!ret)
-					ret = -ERESTARTSYS;
-				break;
-			}
-			continue;
-		}
-		if (copy_to_user(buffer, s->midi.ibuf + ptr, cnt)) {
-			if (!ret)
-				ret = -EFAULT;
-			break;
-		}
-		ptr = (ptr + cnt) % MIDIINBUF;
-		spin_lock_irqsave(&s->lock, flags);
-		s->midi.ird = ptr;
-		s->midi.icnt -= cnt;
-		spin_unlock_irqrestore(&s->lock, flags);
-		count -= cnt;
-		buffer += cnt;
-		ret += cnt;
-		break;
-	}
-	__set_current_state(TASK_RUNNING);
-	remove_wait_queue(&s->midi.iwait, &wait);
-	return ret;
-}
-
-static ssize_t es1371_midi_write(struct file *file, const char __user *buffer, size_t count, loff_t *ppos)
-{
-	struct es1371_state *s = (struct es1371_state *)file->private_data;
-	DECLARE_WAITQUEUE(wait, current);
-	ssize_t ret;
-	unsigned long flags;
-	unsigned ptr;
-	int cnt;
-
-	VALIDATE_STATE(s);
-	if (!access_ok(VERIFY_READ, buffer, count))
-		return -EFAULT;
-	if (count == 0)
-		return 0;
-	ret = 0;
-        add_wait_queue(&s->midi.owait, &wait);
-	while (count > 0) {
-		spin_lock_irqsave(&s->lock, flags);
-		ptr = s->midi.owr;
-		cnt = MIDIOUTBUF - ptr;
-		if (s->midi.ocnt + cnt > MIDIOUTBUF)
-			cnt = MIDIOUTBUF - s->midi.ocnt;
-		if (cnt <= 0) {
-			__set_current_state(TASK_INTERRUPTIBLE);
-			es1371_handle_midi(s);
-		}
-		spin_unlock_irqrestore(&s->lock, flags);
-		if (cnt > count)
-			cnt = count;
-		if (cnt <= 0) {
-			if (file->f_flags & O_NONBLOCK) {
-				if (!ret)
-					ret = -EAGAIN;
-				break;
-			}
-			schedule();
-			if (signal_pending(current)) {
-				if (!ret)
-					ret = -ERESTARTSYS;
-				break;
-			}
-			continue;
-		}
-		if (copy_from_user(s->midi.obuf + ptr, buffer, cnt)) {
-			if (!ret)
-				ret = -EFAULT;
-			break;
-		}
-		ptr = (ptr + cnt) % MIDIOUTBUF;
-		spin_lock_irqsave(&s->lock, flags);
-		s->midi.owr = ptr;
-		s->midi.ocnt += cnt;
-		spin_unlock_irqrestore(&s->lock, flags);
-		count -= cnt;
-		buffer += cnt;
-		ret += cnt;
-		spin_lock_irqsave(&s->lock, flags);
-		es1371_handle_midi(s);
-		spin_unlock_irqrestore(&s->lock, flags);
-	}
-	__set_current_state(TASK_RUNNING);
-	remove_wait_queue(&s->midi.owait, &wait);
-	return ret;
-}
-
-/* No kernel lock - we have our own spinlock */
-static unsigned int es1371_midi_poll(struct file *file, struct poll_table_struct *wait)
-{
-	struct es1371_state *s = (struct es1371_state *)file->private_data;
-	unsigned long flags;
-	unsigned int mask = 0;
-
-	VALIDATE_STATE(s);
-	if (file->f_mode & FMODE_WRITE)
-		poll_wait(file, &s->midi.owait, wait);
-	if (file->f_mode & FMODE_READ)
-		poll_wait(file, &s->midi.iwait, wait);
-	spin_lock_irqsave(&s->lock, flags);
-	if (file->f_mode & FMODE_READ) {
-		if (s->midi.icnt > 0)
-			mask |= POLLIN | POLLRDNORM;
-	}
-	if (file->f_mode & FMODE_WRITE) {
-		if (s->midi.ocnt < MIDIOUTBUF)
-			mask |= POLLOUT | POLLWRNORM;
-	}
-	spin_unlock_irqrestore(&s->lock, flags);
-	return mask;
-}
-
-static int es1371_midi_open(struct inode *inode, struct file *file)
-{
-	int minor = iminor(inode);
-	DECLARE_WAITQUEUE(wait, current);
-	unsigned long flags;
-	struct list_head *list;
-	struct es1371_state *s;
-
-	for (list = devs.next; ; list = list->next) {
-		if (list == &devs)
-			return -ENODEV;
-		s = list_entry(list, struct es1371_state, devs);
-		if (s->dev_midi == minor)
-			break;
-	}
-       	VALIDATE_STATE(s);
-	file->private_data = s;
-	/* wait for device to become free */
-	mutex_lock(&s->open_mutex);
-	while (s->open_mode & (file->f_mode << FMODE_MIDI_SHIFT)) {
-		if (file->f_flags & O_NONBLOCK) {
-			mutex_unlock(&s->open_mutex);
-			return -EBUSY;
-		}
-		add_wait_queue(&s->open_wait, &wait);
-		__set_current_state(TASK_INTERRUPTIBLE);
-		mutex_unlock(&s->open_mutex);
-		schedule();
-		remove_wait_queue(&s->open_wait, &wait);
-		set_current_state(TASK_RUNNING);
-		if (signal_pending(current))
-			return -ERESTARTSYS;
-		mutex_lock(&s->open_mutex);
-	}
-	spin_lock_irqsave(&s->lock, flags);
-	if (!(s->open_mode & (FMODE_MIDI_READ | FMODE_MIDI_WRITE))) {
-		s->midi.ird = s->midi.iwr = s->midi.icnt = 0;
-		s->midi.ord = s->midi.owr = s->midi.ocnt = 0;
-		outb(UCTRL_CNTRL_SWR, s->io+ES1371_REG_UART_CONTROL);
-		outb(0, s->io+ES1371_REG_UART_CONTROL);
-		outb(0, s->io+ES1371_REG_UART_TEST);
-	}
-	if (file->f_mode & FMODE_READ) {
-		s->midi.ird = s->midi.iwr = s->midi.icnt = 0;
-	}
-	if (file->f_mode & FMODE_WRITE) {
-		s->midi.ord = s->midi.owr = s->midi.ocnt = 0;
-	}
-	s->ctrl |= CTRL_UART_EN;
-	outl(s->ctrl, s->io+ES1371_REG_CONTROL);
-	es1371_handle_midi(s);
-	spin_unlock_irqrestore(&s->lock, flags);
-	s->open_mode |= (file->f_mode << FMODE_MIDI_SHIFT) & (FMODE_MIDI_READ | FMODE_MIDI_WRITE);
-	mutex_unlock(&s->open_mutex);
-	return nonseekable_open(inode, file);
-}
-
-static int es1371_midi_release(struct inode *inode, struct file *file)
-{
-	struct es1371_state *s = (struct es1371_state *)file->private_data;
-	DECLARE_WAITQUEUE(wait, current);
-	unsigned long flags;
-	unsigned count, tmo;
-
-	VALIDATE_STATE(s);
-	lock_kernel();
-	if (file->f_mode & FMODE_WRITE) {
-		add_wait_queue(&s->midi.owait, &wait);
-		for (;;) {
-			__set_current_state(TASK_INTERRUPTIBLE);
-			spin_lock_irqsave(&s->lock, flags);
-			count = s->midi.ocnt;
-			spin_unlock_irqrestore(&s->lock, flags);
-			if (count <= 0)
-				break;
-			if (signal_pending(current))
-				break;
-			if (file->f_flags & O_NONBLOCK)
-				break;
-			tmo = (count * HZ) / 3100;
-			if (!schedule_timeout(tmo ? : 1) && tmo)
-				printk(KERN_DEBUG PFX "midi timed out??\n");
-		}
-		remove_wait_queue(&s->midi.owait, &wait);
-		set_current_state(TASK_RUNNING);
-	}
-	mutex_lock(&s->open_mutex);
-	s->open_mode &= ~((file->f_mode << FMODE_MIDI_SHIFT) & (FMODE_MIDI_READ|FMODE_MIDI_WRITE));
-	spin_lock_irqsave(&s->lock, flags);
-	if (!(s->open_mode & (FMODE_MIDI_READ | FMODE_MIDI_WRITE))) {
-		s->ctrl &= ~CTRL_UART_EN;
-		outl(s->ctrl, s->io+ES1371_REG_CONTROL);
-	}
-	spin_unlock_irqrestore(&s->lock, flags);
-	mutex_unlock(&s->open_mutex);
-	wake_up(&s->open_wait);
-	unlock_kernel();
-	return 0;
-}
-
-static /*const*/ struct file_operations es1371_midi_fops = {
-	.owner		= THIS_MODULE,
-	.llseek		= no_llseek,
-	.read		= es1371_midi_read,
-	.write		= es1371_midi_write,
-	.poll		= es1371_midi_poll,
-	.open		= es1371_midi_open,
-	.release	= es1371_midi_release,
-};
-
-/* --------------------------------------------------------------------- */
-
-/*
- * for debugging purposes, we'll create a proc device that dumps the
- * CODEC chipstate
- */
-
-#ifdef ES1371_DEBUG
-static int proc_es1371_dump (char *buf, char **start, off_t fpos, int length, int *eof, void *data)
-{
-	struct es1371_state *s;
-        int cnt, len = 0;
-
-	if (list_empty(&devs))
-		return 0;
-	s = list_entry(devs.next, struct es1371_state, devs);
-        /* print out header */
-        len += sprintf(buf + len, "\t\tCreative ES137x Debug Dump-o-matic\n");
-
-        /* print out CODEC state */
-        len += sprintf (buf + len, "AC97 CODEC state\n");
-	for (cnt=0; cnt <= 0x7e; cnt = cnt +2)
-                len+= sprintf (buf + len, "reg:0x%02x  val:0x%04x\n", cnt, rdcodec(s->codec, cnt));
-
-        if (fpos >=len){
-                *start = buf;
-                *eof =1;
-                return 0;
-        }
-        *start = buf + fpos;
-        if ((len -= fpos) > length)
-                return length;
-        *eof =1;
-        return len;
-
-}
-#endif /* ES1371_DEBUG */
-
-/* --------------------------------------------------------------------- */
-
-/* maximum number of devices; only used for command line params */
-#define NR_DEVICE 5
-
-static int spdif[NR_DEVICE];
-static int nomix[NR_DEVICE];
-static int amplifier[NR_DEVICE];
-
-static unsigned int devindex;
-
-module_param_array(spdif, bool, NULL, 0);
-MODULE_PARM_DESC(spdif, "if 1 the output is in S/PDIF digital mode");
-module_param_array(nomix, bool, NULL, 0);
-MODULE_PARM_DESC(nomix, "if 1 no analog audio is mixed to the digital output");
-module_param_array(amplifier, bool, NULL, 0);
-MODULE_PARM_DESC(amplifier, "Set to 1 if the machine needs the amp control enabling (many laptops)");
-
-MODULE_AUTHOR("Thomas M. Sailer, sailer@ife.ee.ethz.ch, hb9jnx@hb9w.che.eu");
-MODULE_DESCRIPTION("ES1371 AudioPCI97 Driver");
-MODULE_LICENSE("GPL");
-
-
-/* --------------------------------------------------------------------- */
-
-static struct initvol {
-	int mixch;
-	int vol;
-} initvol[] __devinitdata = {
-	{ SOUND_MIXER_WRITE_LINE, 0x4040 },
-	{ SOUND_MIXER_WRITE_CD, 0x4040 },
-	{ MIXER_WRITE(SOUND_MIXER_VIDEO), 0x4040 },
-	{ SOUND_MIXER_WRITE_LINE1, 0x4040 },
-	{ SOUND_MIXER_WRITE_PCM, 0x4040 },
-	{ SOUND_MIXER_WRITE_VOLUME, 0x4040 },
-	{ MIXER_WRITE(SOUND_MIXER_PHONEOUT), 0x4040 },
-	{ SOUND_MIXER_WRITE_OGAIN, 0x4040 },
-	{ MIXER_WRITE(SOUND_MIXER_PHONEIN), 0x4040 },
-	{ SOUND_MIXER_WRITE_SPEAKER, 0x4040 },
-	{ SOUND_MIXER_WRITE_MIC, 0x4040 },
-	{ SOUND_MIXER_WRITE_RECLEV, 0x4040 },
-	{ SOUND_MIXER_WRITE_IGAIN, 0x4040 }
-};
-
-static struct
-{
-	short svid, sdid;
-} amplifier_needed[] = 
-{
-	{ 0x107B, 0x2150 },		/* Gateway Solo 2150 */
-	{ 0x13BD, 0x100C },		/* Mebius PC-MJ100V */
-	{ 0x1102, 0x5938 },		/* Targa Xtender 300 */
-	{ 0x1102, 0x8938 },		/* IPC notebook */
-	{ PCI_ANY_ID, PCI_ANY_ID }
-};
-
-#ifdef SUPPORT_JOYSTICK
-
-static int __devinit es1371_register_gameport(struct es1371_state *s)
-{
-	struct gameport *gp;
-	int gpio;
-
-	for (gpio = 0x218; gpio >= 0x200; gpio -= 0x08)
-		if (request_region(gpio, JOY_EXTENT, "es1371"))
-			break;
-
-	if (gpio < 0x200) {
-		printk(KERN_ERR PFX "no free joystick address found\n");
-		return -EBUSY;
-	}
-
-	s->gameport = gp = gameport_allocate_port();
-	if (!gp) {
-		printk(KERN_ERR PFX "can not allocate memory for gameport\n");
-		release_region(gpio, JOY_EXTENT);
-		return -ENOMEM;
-	}
-
-	gameport_set_name(gp, "ESS1371 Gameport");
-	gameport_set_phys(gp, "isa%04x/gameport0", gpio);
-	gp->dev.parent = &s->dev->dev;
-	gp->io = gpio;
-
-	s->ctrl |= CTRL_JYSTK_EN | (((gpio >> 3) & CTRL_JOY_MASK) << CTRL_JOY_SHIFT);
-	outl(s->ctrl, s->io + ES1371_REG_CONTROL);
-
-	gameport_register_port(gp);
-
-	return 0;
-}
-
-static inline void es1371_unregister_gameport(struct es1371_state *s)
-{
-	if (s->gameport) {
-		int gpio = s->gameport->io;
-		gameport_unregister_port(s->gameport);
-		release_region(gpio, JOY_EXTENT);
-
-	}
-}
-
-#else
-static inline int es1371_register_gameport(struct es1371_state *s) { return -ENOSYS; }
-static inline void es1371_unregister_gameport(struct es1371_state *s) { }
-#endif /* SUPPORT_JOYSTICK */
-
-
-static int __devinit es1371_probe(struct pci_dev *pcidev, const struct pci_device_id *pciid)
-{
-	struct es1371_state *s;
-	mm_segment_t fs;
-	int i, val, res = -1;
-	int idx;
-	unsigned long tmo;
-	signed long tmo2;
-	unsigned int cssr;
-
-	if ((res=pci_enable_device(pcidev)))
-		return res;
-
-	if (!(pci_resource_flags(pcidev, 0) & IORESOURCE_IO))
-		return -ENODEV;
-	if (pcidev->irq == 0) 
-		return -ENODEV;
-	i = pci_set_dma_mask(pcidev, DMA_32BIT_MASK);
-	if (i) {
-		printk(KERN_WARNING "es1371: architecture does not support 32bit PCI busmaster DMA\n");
-		return i;
-	}
-	if (!(s = kzalloc(sizeof(struct es1371_state), GFP_KERNEL))) {
-		printk(KERN_WARNING PFX "out of memory\n");
-		return -ENOMEM;
-	}
-	
-	s->codec = ac97_alloc_codec();
-	if(s->codec == NULL)
-		goto err_codec;
-		
-	init_waitqueue_head(&s->dma_adc.wait);
-	init_waitqueue_head(&s->dma_dac1.wait);
-	init_waitqueue_head(&s->dma_dac2.wait);
-	init_waitqueue_head(&s->open_wait);
-	init_waitqueue_head(&s->midi.iwait);
-	init_waitqueue_head(&s->midi.owait);
-	mutex_init(&s->open_mutex);
-	spin_lock_init(&s->lock);
-	s->magic = ES1371_MAGIC;
-	s->dev = pcidev;
-	s->io = pci_resource_start(pcidev, 0);
-	s->irq = pcidev->irq;
-	s->vendor = pcidev->vendor;
-	s->device = pcidev->device;
-	s->rev = pcidev->revision;
-	s->codec->private_data = s;
-	s->codec->id = 0;
-	s->codec->codec_read = rdcodec;
-	s->codec->codec_write = wrcodec;
-	printk(KERN_INFO PFX "found chip, vendor id 0x%04x device id 0x%04x revision 0x%02x\n",
-	       s->vendor, s->device, s->rev);
-	if (!request_region(s->io, ES1371_EXTENT, "es1371")) {
-		printk(KERN_ERR PFX "io ports %#lx-%#lx in use\n", s->io, s->io+ES1371_EXTENT-1);
-		res = -EBUSY;
-		goto err_region;
-	}
-	if ((res=request_irq(s->irq, es1371_interrupt, IRQF_SHARED, "es1371",s))) {
-		printk(KERN_ERR PFX "irq %u in use\n", s->irq);
-		goto err_irq;
-	}
-	printk(KERN_INFO PFX "found es1371 rev %d at io %#lx irq %u\n",
-	       s->rev, s->io, s->irq);
-	/* register devices */
-	if ((res=(s->dev_audio = register_sound_dsp(&es1371_audio_fops,-1)))<0)
-		goto err_dev1;
-	if ((res=(s->codec->dev_mixer = register_sound_mixer(&es1371_mixer_fops, -1))) < 0)
-		goto err_dev2;
-	if ((res=(s->dev_dac = register_sound_dsp(&es1371_dac_fops, -1))) < 0)
-		goto err_dev3;
-	if ((res=(s->dev_midi = register_sound_midi(&es1371_midi_fops, -1)))<0 )
-		goto err_dev4;
-#ifdef ES1371_DEBUG
-	/* initialize the debug proc device */
-	s->ps = create_proc_read_entry("es1371",0,NULL,proc_es1371_dump,NULL);
-#endif /* ES1371_DEBUG */
-	
-	/* initialize codec registers */
-	s->ctrl = 0;
-
-	/* Check amplifier requirements */
-	
-	if (amplifier[devindex])
-		s->ctrl |= CTRL_GPIO_OUT0;
-	else for(idx = 0; amplifier_needed[idx].svid != PCI_ANY_ID; idx++)
-	{
-		if(pcidev->subsystem_vendor == amplifier_needed[idx].svid &&
-		   pcidev->subsystem_device == amplifier_needed[idx].sdid)
-		{
-                    	s->ctrl |= CTRL_GPIO_OUT0;   /* turn internal amplifier on */
-                    	printk(KERN_INFO PFX "Enabling internal amplifier.\n");
-		}
-	}
-
-	s->sctrl = 0;
-	cssr = 0;
-	s->spdif_volume = -1;
-	/* check to see if s/pdif mode is being requested */
-	if (spdif[devindex]) {
-		if (s->rev >= 4) {
-			printk(KERN_INFO PFX "enabling S/PDIF output\n");
-			s->spdif_volume = 0;
-			cssr |= STAT_EN_SPDIF;
-			s->ctrl |= CTRL_SPDIFEN_B;
-			if (nomix[devindex]) /* don't mix analog inputs to s/pdif output */
-				s->ctrl |= CTRL_RECEN_B;
-		} else {
-			printk(KERN_ERR PFX "revision %d does not support S/PDIF\n", s->rev);
-		}
-	}
-	/* initialize the chips */
-	outl(s->ctrl, s->io+ES1371_REG_CONTROL);
-	outl(s->sctrl, s->io+ES1371_REG_SERIAL_CONTROL);
-	outl(LEGACY_JFAST, s->io+ES1371_REG_LEGACY);
-	pci_set_master(pcidev);  /* enable bus mastering */
-	/* if we are a 5880 turn on the AC97 */
-	if (s->vendor == PCI_VENDOR_ID_ENSONIQ &&
-	    ((s->device == PCI_DEVICE_ID_ENSONIQ_CT5880 && s->rev >= CT5880REV_CT5880_C) || 
-	     (s->device == PCI_DEVICE_ID_ENSONIQ_ES1371 && s->rev == ES1371REV_CT5880_A) || 
-	     (s->device == PCI_DEVICE_ID_ENSONIQ_ES1371 && s->rev == ES1371REV_ES1373_8))) { 
-		cssr |= CSTAT_5880_AC97_RST;
-		outl(cssr, s->io+ES1371_REG_STATUS);
-		/* need to delay around 20ms(bleech) to give
-		   some CODECs enough time to wakeup */
-		tmo = jiffies + (HZ / 50) + 1;
-		for (;;) {
-			tmo2 = tmo - jiffies;
-			if (tmo2 <= 0)
-				break;
-			schedule_timeout(tmo2);
-		}
-	}
-	/* AC97 warm reset to start the bitclk */
-	outl(s->ctrl | CTRL_SYNCRES, s->io+ES1371_REG_CONTROL);
-	udelay(2);
-	outl(s->ctrl, s->io+ES1371_REG_CONTROL);
-	/* init the sample rate converter */
-	src_init(s);
-	/* codec init */
-	if (!ac97_probe_codec(s->codec)) {
-		res = -ENODEV;
-		goto err_gp;
-	}
-	/* set default values */
-
-	fs = get_fs();
-	set_fs(KERNEL_DS);
-	val = SOUND_MASK_LINE;
-	mixdev_ioctl(s->codec, SOUND_MIXER_WRITE_RECSRC, (unsigned long)&val);
-	for (i = 0; i < ARRAY_SIZE(initvol); i++) {
-		val = initvol[i].vol;
-		mixdev_ioctl(s->codec, initvol[i].mixch, (unsigned long)&val);
-	}
-	/* mute master and PCM when in S/PDIF mode */
-	if (s->spdif_volume != -1) {
-		val = 0x0000;
-		s->codec->mixer_ioctl(s->codec, SOUND_MIXER_WRITE_VOLUME, (unsigned long)&val);
-		s->codec->mixer_ioctl(s->codec, SOUND_MIXER_WRITE_PCM, (unsigned long)&val);
-	}
-	set_fs(fs);
-	/* turn on S/PDIF output driver if requested */
-	outl(cssr, s->io+ES1371_REG_STATUS);
-
-	es1371_register_gameport(s);
-
-	/* store it in the driver field */
-	pci_set_drvdata(pcidev, s);
-	/* put it into driver list */
-	list_add_tail(&s->devs, &devs);
-	/* increment devindex */
-	if (devindex < NR_DEVICE-1)
-		devindex++;
-	return 0;
-
- err_gp:
-#ifdef ES1371_DEBUG
-	if (s->ps)
-		remove_proc_entry("es1371", NULL);
-#endif
-	unregister_sound_midi(s->dev_midi);
- err_dev4:
-	unregister_sound_dsp(s->dev_dac);
- err_dev3:
-	unregister_sound_mixer(s->codec->dev_mixer);
- err_dev2:
-	unregister_sound_dsp(s->dev_audio);
- err_dev1:
-	printk(KERN_ERR PFX "cannot register misc device\n");
-	free_irq(s->irq, s);
- err_irq:
-	release_region(s->io, ES1371_EXTENT);
- err_region:
- err_codec:
-	ac97_release_codec(s->codec);
-	kfree(s);
-	return res;
-}
-
-static void __devexit es1371_remove(struct pci_dev *dev)
-{
-	struct es1371_state *s = pci_get_drvdata(dev);
-
-	if (!s)
-		return;
-	list_del(&s->devs);
-#ifdef ES1371_DEBUG
-	if (s->ps)
-		remove_proc_entry("es1371", NULL);
-#endif /* ES1371_DEBUG */
-	outl(0, s->io+ES1371_REG_CONTROL); /* switch everything off */
-	outl(0, s->io+ES1371_REG_SERIAL_CONTROL); /* clear serial interrupts */
-	synchronize_irq(s->irq);
-	free_irq(s->irq, s);
-	es1371_unregister_gameport(s);
-	release_region(s->io, ES1371_EXTENT);
-	unregister_sound_dsp(s->dev_audio);
-	unregister_sound_mixer(s->codec->dev_mixer);
-	unregister_sound_dsp(s->dev_dac);
-	unregister_sound_midi(s->dev_midi);
-	ac97_release_codec(s->codec);
-	kfree(s);
-	pci_set_drvdata(dev, NULL);
-}
-
-static struct pci_device_id id_table[] = {
-	{ PCI_VENDOR_ID_ENSONIQ, PCI_DEVICE_ID_ENSONIQ_ES1371, PCI_ANY_ID, PCI_ANY_ID, 0, 0 },
-	{ PCI_VENDOR_ID_ENSONIQ, PCI_DEVICE_ID_ENSONIQ_CT5880, PCI_ANY_ID, PCI_ANY_ID, 0, 0 },
-	{ PCI_VENDOR_ID_ECTIVA, PCI_DEVICE_ID_ECTIVA_EV1938, PCI_ANY_ID, PCI_ANY_ID, 0, 0 },
-	{ 0, }
-};
-
-MODULE_DEVICE_TABLE(pci, id_table);
-
-static struct pci_driver es1371_driver = {
-	.name		= "es1371",
-	.id_table	= id_table,
-	.probe		= es1371_probe,
-	.remove		= __devexit_p(es1371_remove),
-};
-
-static int __init init_es1371(void)
-{
-	printk(KERN_INFO PFX "version v0.32 time " __TIME__ " " __DATE__ "\n");
-	return pci_register_driver(&es1371_driver);
-}
-
-static void __exit cleanup_es1371(void)
-{
-	printk(KERN_INFO PFX "unloading\n");
-	pci_unregister_driver(&es1371_driver);
-}
-
-module_init(init_es1371);
-module_exit(cleanup_es1371);
-
-/* --------------------------------------------------------------------- */
-
-#ifndef MODULE
-
-/* format is: es1371=[spdif,[nomix,[amplifier]]] */
-
-static int __init es1371_setup(char *str)
-{
-	static unsigned __initdata nr_dev = 0;
-
-	if (nr_dev >= NR_DEVICE)
-		return 0;
-
-	(void)
-        ((get_option(&str, &spdif[nr_dev]) == 2)
-         && (get_option(&str, &nomix[nr_dev]) == 2)
-         && (get_option(&str, &amplifier[nr_dev])));
-
-	nr_dev++;
-	return 1;
-}
-
-__setup("es1371=", es1371_setup);
-
-#endif /* MODULE */