aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/hwmon/w83791d13
-rw-r--r--drivers/hwmon/w83791d.c79
2 files changed, 91 insertions, 1 deletions
diff --git a/Documentation/hwmon/w83791d b/Documentation/hwmon/w83791d
index 49c0e94..b1e4798 100644
--- a/Documentation/hwmon/w83791d
+++ b/Documentation/hwmon/w83791d
@@ -108,6 +108,17 @@ going forward.
The driver reads the hardware chip values at most once every three seconds.
User mode code requesting values more often will receive cached values.
+/sys files
+----------
+The sysfs-interface is documented in the 'sysfs-interface' file. Only
+chip-specific options are documented here.
+
+pwm[1-3]_enable - this file controls mode of fan/temperature control for
+ fan 1-3. Fan/PWM 4-5 only support manual mode.
+ * 1 Manual mode
+ * 2 Thermal Cruise mode (no further support)
+ * 3 Fan Speed Cruise mode (no further support)
+
Alarms bitmap vs. beep_mask bitmask
------------------------------------
For legacy code using the alarms and beep_mask files:
@@ -138,4 +149,4 @@ global_enable: alarms: -------- beep_mask: 0x800000 (modified via beep_enable)
W83791D TODO:
---------------
-Provide a patch for smart-fan control (still need appropriate motherboard/fans)
+Provide a patch for Thermal Cruise registers.
diff --git a/drivers/hwmon/w83791d.c b/drivers/hwmon/w83791d.c
index a8ff4e1..a4d2b02 100644
--- a/drivers/hwmon/w83791d.c
+++ b/drivers/hwmon/w83791d.c
@@ -287,6 +287,8 @@ struct w83791d_data {
/* PWMs */
u8 pwm[5]; /* pwm duty cycle */
+ u8 pwm_enable[3]; /* pwm enable status for fan 1-3
+ (fan 4-5 only support manual mode) */
/* Misc */
u32 alarms; /* realtime status register encoding,combined */
@@ -707,6 +709,71 @@ static struct sensor_device_attribute sda_pwm[] = {
show_pwm, store_pwm, 4),
};
+static ssize_t show_pwmenable(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct w83791d_data *data = w83791d_update_device(dev);
+ return sprintf(buf, "%u\n", data->pwm_enable[nr] + 1);
+}
+
+static ssize_t store_pwmenable(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83791d_data *data = i2c_get_clientdata(client);
+ int nr = sensor_attr->index;
+ unsigned long val;
+ u8 reg_cfg_tmp;
+ u8 reg_idx = 0;
+ u8 val_shift = 0;
+ u8 keep_mask = 0;
+
+ int ret = strict_strtoul(buf, 10, &val);
+
+ if (ret || val < 1 || val > 3)
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ data->pwm_enable[nr] = val - 1;
+ switch (nr) {
+ case 0:
+ reg_idx = 0;
+ val_shift = 2;
+ keep_mask = 0xf3;
+ break;
+ case 1:
+ reg_idx = 0;
+ val_shift = 4;
+ keep_mask = 0xcf;
+ break;
+ case 2:
+ reg_idx = 1;
+ val_shift = 2;
+ keep_mask = 0xf3;
+ break;
+ }
+
+ reg_cfg_tmp = w83791d_read(client, W83791D_REG_FAN_CFG[reg_idx]);
+ reg_cfg_tmp = (reg_cfg_tmp & keep_mask) |
+ data->pwm_enable[nr] << val_shift;
+
+ w83791d_write(client, W83791D_REG_FAN_CFG[reg_idx], reg_cfg_tmp);
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+static struct sensor_device_attribute sda_pwmenable[] = {
+ SENSOR_ATTR(pwm1_enable, S_IWUSR | S_IRUGO,
+ show_pwmenable, store_pwmenable, 0),
+ SENSOR_ATTR(pwm2_enable, S_IWUSR | S_IRUGO,
+ show_pwmenable, store_pwmenable, 1),
+ SENSOR_ATTR(pwm3_enable, S_IWUSR | S_IRUGO,
+ show_pwmenable, store_pwmenable, 2),
+};
+
/* read/write the temperature1, includes measured value and limits */
static ssize_t show_temp1(struct device *dev, struct device_attribute *devattr,
char *buf)
@@ -974,6 +1041,9 @@ static struct attribute *w83791d_attributes[] = {
&sda_pwm[0].dev_attr.attr,
&sda_pwm[1].dev_attr.attr,
&sda_pwm[2].dev_attr.attr,
+ &sda_pwmenable[0].dev_attr.attr,
+ &sda_pwmenable[1].dev_attr.attr,
+ &sda_pwmenable[2].dev_attr.attr,
NULL
};
@@ -1325,6 +1395,15 @@ static struct w83791d_data *w83791d_update_device(struct device *dev)
W83791D_REG_PWM[i]);
}
+ /* Update PWM enable status */
+ for (i = 0; i < 2; i++) {
+ reg_array_tmp[i] = w83791d_read(client,
+ W83791D_REG_FAN_CFG[i]);
+ }
+ data->pwm_enable[0] = (reg_array_tmp[0] >> 2) & 0x03;
+ data->pwm_enable[1] = (reg_array_tmp[0] >> 4) & 0x03;
+ data->pwm_enable[2] = (reg_array_tmp[1] >> 2) & 0x03;
+
/* Update the first temperature sensor */
for (i = 0; i < 3; i++) {
data->temp1[i] = w83791d_read(client,