1 files changed, 217 insertions, 0 deletions
diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S
new file mode 100644
index 0000000..a52da0d
--- /dev/null
+++ b/arch/arm/kernel/head-common.S
@@ -0,0 +1,217 @@
+/*
+ *  linux/arch/arm/kernel/head-common.S
+ *
+ *  Copyright (C) 1994-2002 Russell King
+ *  Copyright (c) 2003 ARM Limited
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+	.type	__switch_data, %object
+__switch_data:
+	.long	__mmap_switched
+	.long	__data_loc			@ r4
+	.long	__data_start			@ r5
+	.long	__bss_start			@ r6
+	.long	_end				@ r7
+	.long	processor_id			@ r4
+	.long	__machine_arch_type		@ r5
+	.long	cr_alignment			@ r6
+	.long	init_thread_union + THREAD_START_SP @ sp
+
+/*
+ * The following fragment of code is executed with the MMU on in MMU mode,
+ * and uses absolute addresses; this is not position independent.
+ *
+ *  r0  = cp#15 control register
+ *  r1  = machine ID
+ *  r9  = processor ID
+ */
+	.type	__mmap_switched, %function
+__mmap_switched:
+	adr	r3, __switch_data + 4
+
+	ldmia	r3!, {r4, r5, r6, r7}
+	cmp	r4, r5				@ Copy data segment if needed
+1:	cmpne	r5, r6
+	ldrne	fp, [r4], #4
+	strne	fp, [r5], #4
+	bne	1b
+
+	mov	fp, #0				@ Clear BSS (and zero fp)
+1:	cmp	r6, r7
+	strcc	fp, [r6],#4
+	bcc	1b
+
+	ldmia	r3, {r4, r5, r6, sp}
+	str	r9, [r4]			@ Save processor ID
+	str	r1, [r5]			@ Save machine type
+	bic	r4, r0, #CR_A			@ Clear 'A' bit
+	stmia	r6, {r0, r4}			@ Save control register values
+	b	start_kernel
+
+/*
+ * Exception handling.  Something went wrong and we can't proceed.  We
+ * ought to tell the user, but since we don't have any guarantee that
+ * we're even running on the right architecture, we do virtually nothing.
+ *
+ * If CONFIG_DEBUG_LL is set we try to print out something about the error
+ * and hope for the best (useful if bootloader fails to pass a proper
+ * machine ID for example).
+ */
+
+	.type	__error_p, %function
+__error_p:
+#ifdef CONFIG_DEBUG_LL
+	adr	r0, str_p1
+	bl	printascii
+	b	__error
+str_p1:	.asciz	"\nError: unrecognized/unsupported processor variant.\n"
+	.align
+#endif
+
+	.type	__error_a, %function
+__error_a:
+#ifdef CONFIG_DEBUG_LL
+	mov	r4, r1				@ preserve machine ID
+	adr	r0, str_a1
+	bl	printascii
+	mov	r0, r4
+	bl	printhex8
+	adr	r0, str_a2
+	bl	printascii
+	adr	r3, 3f
+	ldmia	r3, {r4, r5, r6}		@ get machine desc list
+	sub	r4, r3, r4			@ get offset between virt&phys
+	add	r5, r5, r4			@ convert virt addresses to
+	add	r6, r6, r4			@ physical address space
+1:	ldr	r0, [r5, #MACHINFO_TYPE]	@ get machine type
+	bl	printhex8
+	mov	r0, #'\t'
+	bl	printch
+	ldr     r0, [r5, #MACHINFO_NAME]	@ get machine name
+	add	r0, r0, r4
+	bl	printascii
+	mov	r0, #'\n'
+	bl	printch
+	add	r5, r5, #SIZEOF_MACHINE_DESC	@ next machine_desc
+	cmp	r5, r6
+	blo	1b
+	adr	r0, str_a3
+	bl	printascii
+	b	__error
+str_a1:	.asciz	"\nError: unrecognized/unsupported machine ID (r1 = 0x"
+str_a2:	.asciz	").\n\nAvailable machine support:\n\nID (hex)\tNAME\n"
+str_a3:	.asciz	"\nPlease check your kernel config and/or bootloader.\n"
+	.align
+#endif
+
+	.type	__error, %function
+__error:
+#ifdef CONFIG_ARCH_RPC
+/*
+ * Turn the screen red on a error - RiscPC only.
+ */
+	mov	r0, #0x02000000
+	mov	r3, #0x11
+	orr	r3, r3, r3, lsl #8
+	orr	r3, r3, r3, lsl #16
+	str	r3, [r0], #4
+	str	r3, [r0], #4
+	str	r3, [r0], #4
+	str	r3, [r0], #4
+#endif
+1:	mov	r0, r0
+	b	1b
+
+
+/*
+ * Read processor ID register (CP#15, CR0), and look up in the linker-built
+ * supported processor list.  Note that we can't use the absolute addresses
+ * for the __proc_info lists since we aren't running with the MMU on
+ * (and therefore, we are not in the correct address space).  We have to
+ * calculate the offset.
+ *
+ *	r9 = cpuid
+ * Returns:
+ *	r3, r4, r6 corrupted
+ *	r5 = proc_info pointer in physical address space
+ *	r9 = cpuid (preserved)
+ */
+	.type	__lookup_processor_type, %function
+__lookup_processor_type:
+	adr	r3, 3f
+	ldmda	r3, {r5 - r7}
+	sub	r3, r3, r7			@ get offset between virt&phys
+	add	r5, r5, r3			@ convert virt addresses to
+	add	r6, r6, r3			@ physical address space
+1:	ldmia	r5, {r3, r4}			@ value, mask
+	and	r4, r4, r9			@ mask wanted bits
+	teq	r3, r4
+	beq	2f
+	add	r5, r5, #PROC_INFO_SZ		@ sizeof(proc_info_list)
+	cmp	r5, r6
+	blo	1b
+	mov	r5, #0				@ unknown processor
+2:	mov	pc, lr
+
+/*
+ * This provides a C-API version of the above function.
+ */
+ENTRY(lookup_processor_type)
+	stmfd	sp!, {r4 - r7, r9, lr}
+	mov	r9, r0
+	bl	__lookup_processor_type
+	mov	r0, r5
+	ldmfd	sp!, {r4 - r7, r9, pc}
+
+/*
+ * Look in include/asm-arm/procinfo.h and arch/arm/kernel/arch.[ch] for
+ * more information about the __proc_info and __arch_info structures.
+ */
+	.long	__proc_info_begin
+	.long	__proc_info_end
+3:	.long	.
+	.long	__arch_info_begin
+	.long	__arch_info_end
+
+/*
+ * Lookup machine architecture in the linker-build list of architectures.
+ * Note that we can't use the absolute addresses for the __arch_info
+ * lists since we aren't running with the MMU on (and therefore, we are
+ * not in the correct address space).  We have to calculate the offset.
+ *
+ *  r1 = machine architecture number
+ * Returns:
+ *  r3, r4, r6 corrupted
+ *  r5 = mach_info pointer in physical address space
+ */
+	.type	__lookup_machine_type, %function
+__lookup_machine_type:
+	adr	r3, 3b
+	ldmia	r3, {r4, r5, r6}
+	sub	r3, r3, r4			@ get offset between virt&phys
+	add	r5, r5, r3			@ convert virt addresses to
+	add	r6, r6, r3			@ physical address space
+1:	ldr	r3, [r5, #MACHINFO_TYPE]	@ get machine type
+	teq	r3, r1				@ matches loader number?
+	beq	2f				@ found
+	add	r5, r5, #SIZEOF_MACHINE_DESC	@ next machine_desc
+	cmp	r5, r6
+	blo	1b
+	mov	r5, #0				@ unknown machine
+2:	mov	pc, lr
+
+/*
+ * This provides a C-API version of the above function.
+ */
+ENTRY(lookup_machine_type)
+	stmfd	sp!, {r4 - r6, lr}
+	mov	r1, r0
+	bl	__lookup_machine_type
+	mov	r0, r5
+	ldmfd	sp!, {r4 - r6, pc}