diff options
Diffstat (limited to 'arch/powerpc/platforms/cell/celleb_scc_epci.c')
| -rw-r--r-- | arch/powerpc/platforms/cell/celleb_scc_epci.c | 438 |
1 files changed, 438 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/cell/celleb_scc_epci.c b/arch/powerpc/platforms/cell/celleb_scc_epci.c new file mode 100644 index 0000000..08c285b --- /dev/null +++ b/arch/powerpc/platforms/cell/celleb_scc_epci.c @@ -0,0 +1,438 @@ +/* + * Support for SCC external PCI + * + * (C) Copyright 2004-2007 TOSHIBA CORPORATION + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#undef DEBUG + +#include <linux/kernel.h> +#include <linux/threads.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/pci_regs.h> +#include <linux/bootmem.h> + +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/prom.h> +#include <asm/pci-bridge.h> +#include <asm/ppc-pci.h> + +#include "celleb_scc.h" +#include "celleb_pci.h" + +#define MAX_PCI_DEVICES 32 +#define MAX_PCI_FUNCTIONS 8 + +#define iob() __asm__ __volatile__("eieio; sync":::"memory") + +static inline PCI_IO_ADDR celleb_epci_get_epci_base( + struct pci_controller *hose) +{ + /* + * Note: + * Celleb epci uses cfg_addr as a base address for + * epci control registers. + */ + + return hose->cfg_addr; +} + +static inline PCI_IO_ADDR celleb_epci_get_epci_cfg( + struct pci_controller *hose) +{ + /* + * Note: + * Celleb epci uses cfg_data as a base address for + * configuration area for epci devices. + */ + + return hose->cfg_data; +} + +static inline void clear_and_disable_master_abort_interrupt( + struct pci_controller *hose) +{ + PCI_IO_ADDR epci_base; + PCI_IO_ADDR reg; + epci_base = celleb_epci_get_epci_base(hose); + reg = epci_base + PCI_COMMAND; + out_be32(reg, in_be32(reg) | (PCI_STATUS_REC_MASTER_ABORT << 16)); +} + +static int celleb_epci_check_abort(struct pci_controller *hose, + PCI_IO_ADDR addr) +{ + PCI_IO_ADDR reg; + PCI_IO_ADDR epci_base; + u32 val; + + iob(); + epci_base = celleb_epci_get_epci_base(hose); + + reg = epci_base + PCI_COMMAND; + val = in_be32(reg); + + if (val & (PCI_STATUS_REC_MASTER_ABORT << 16)) { + out_be32(reg, + (val & 0xffff) | (PCI_STATUS_REC_MASTER_ABORT << 16)); + + /* clear PCI Controller error, FRE, PMFE */ + reg = epci_base + SCC_EPCI_STATUS; + out_be32(reg, SCC_EPCI_INT_PAI); + + reg = epci_base + SCC_EPCI_VCSR; + val = in_be32(reg) & 0xffff; + val |= SCC_EPCI_VCSR_FRE; + out_be32(reg, val); + + reg = epci_base + SCC_EPCI_VISTAT; + out_be32(reg, SCC_EPCI_VISTAT_PMFE); + return PCIBIOS_DEVICE_NOT_FOUND; + } + + return PCIBIOS_SUCCESSFUL; +} + +static PCI_IO_ADDR celleb_epci_make_config_addr(struct pci_bus *bus, + struct pci_controller *hose, unsigned int devfn, int where) +{ + PCI_IO_ADDR addr; + + if (bus != hose->bus) + addr = celleb_epci_get_epci_cfg(hose) + + (((bus->number & 0xff) << 16) + | ((devfn & 0xff) << 8) + | (where & 0xff) + | 0x01000000); + else + addr = celleb_epci_get_epci_cfg(hose) + + (((devfn & 0xff) << 8) | (where & 0xff)); + + pr_debug("EPCI: config_addr = 0x%p\n", addr); + + return addr; +} + +static int celleb_epci_read_config(struct pci_bus *bus, + unsigned int devfn, int where, int size, u32 *val) +{ + PCI_IO_ADDR epci_base; + PCI_IO_ADDR addr; + struct device_node *node; + struct pci_controller *hose; + + /* allignment check */ + BUG_ON(where % size); + + node = (struct device_node *)bus->sysdata; + hose = pci_find_hose_for_OF_device(node); + + if (!celleb_epci_get_epci_cfg(hose)) + return PCIBIOS_DEVICE_NOT_FOUND; + + if (bus->number == hose->first_busno && devfn == 0) { + /* EPCI controller self */ + + epci_base = celleb_epci_get_epci_base(hose); + addr = epci_base + where; + + switch (size) { + case 1: + *val = in_8(addr); + break; + case 2: + *val = in_be16(addr); + break; + case 4: + *val = in_be32(addr); + break; + default: + return PCIBIOS_DEVICE_NOT_FOUND; + } + + } else { + + clear_and_disable_master_abort_interrupt(hose); + addr = celleb_epci_make_config_addr(bus, hose, devfn, where); + + switch (size) { + case 1: + *val = in_8(addr); + break; + case 2: + *val = in_le16(addr); + break; + case 4: + *val = in_le32(addr); + break; + default: + return PCIBIOS_DEVICE_NOT_FOUND; + } + } + + pr_debug("EPCI: " + "addr=0x%p, devfn=0x%x, where=0x%x, size=0x%x, val=0x%x\n", + addr, devfn, where, size, *val); + + return celleb_epci_check_abort(hose, NULL); +} + +static int celleb_epci_write_config(struct pci_bus *bus, + unsigned int devfn, int where, int size, u32 val) +{ + PCI_IO_ADDR epci_base; + PCI_IO_ADDR addr; + struct device_node *node; + struct pci_controller *hose; + + /* allignment check */ + BUG_ON(where % size); + + node = (struct device_node *)bus->sysdata; + hose = pci_find_hose_for_OF_device(node); + + + if (!celleb_epci_get_epci_cfg(hose)) + return PCIBIOS_DEVICE_NOT_FOUND; + + if (bus->number == hose->first_busno && devfn == 0) { + /* EPCI controller self */ + + epci_base = celleb_epci_get_epci_base(hose); + addr = epci_base + where; + + switch (size) { + case 1: + out_8(addr, val); + break; + case 2: + out_be16(addr, val); + break; + case 4: + out_be32(addr, val); + break; + default: + return PCIBIOS_DEVICE_NOT_FOUND; + } + + } else { + + clear_and_disable_master_abort_interrupt(hose); + addr = celleb_epci_make_config_addr(bus, hose, devfn, where); + + switch (size) { + case 1: + out_8(addr, val); + break; + case 2: + out_le16(addr, val); + break; + case 4: + out_le32(addr, val); + break; + default: + return PCIBIOS_DEVICE_NOT_FOUND; + } + } + + return celleb_epci_check_abort(hose, addr); +} + +struct pci_ops celleb_epci_ops = { + .read = celleb_epci_read_config, + .write = celleb_epci_write_config, +}; + +/* to be moved in FW */ +static int __init celleb_epci_init(struct pci_controller *hose) +{ + u32 val; + PCI_IO_ADDR reg; + PCI_IO_ADDR epci_base; + int hwres = 0; + + epci_base = celleb_epci_get_epci_base(hose); + + /* PCI core reset(Internal bus and PCI clock) */ + reg = epci_base + SCC_EPCI_CKCTRL; + val = in_be32(reg); + if (val == 0x00030101) + hwres = 1; + else { + val &= ~(SCC_EPCI_CKCTRL_CRST0 | SCC_EPCI_CKCTRL_CRST1); + out_be32(reg, val); + + /* set PCI core clock */ + val = in_be32(reg); + val |= (SCC_EPCI_CKCTRL_OCLKEN | SCC_EPCI_CKCTRL_LCLKEN); + out_be32(reg, val); + + /* release PCI core reset (internal bus) */ + val = in_be32(reg); + val |= SCC_EPCI_CKCTRL_CRST0; + out_be32(reg, val); + + /* set PCI clock select */ + reg = epci_base + SCC_EPCI_CLKRST; + val = in_be32(reg); + val &= ~SCC_EPCI_CLKRST_CKS_MASK; + val |= SCC_EPCI_CLKRST_CKS_2; + out_be32(reg, val); + + /* set arbiter */ + reg = epci_base + SCC_EPCI_ABTSET; + out_be32(reg, 0x0f1f001f); /* temporary value */ + + /* buffer on */ + reg = epci_base + SCC_EPCI_CLKRST; + val = in_be32(reg); + val |= SCC_EPCI_CLKRST_BC; + out_be32(reg, val); + + /* PCI clock enable */ + val = in_be32(reg); + val |= SCC_EPCI_CLKRST_PCKEN; + out_be32(reg, val); + + /* release PCI core reset (all) */ + reg = epci_base + SCC_EPCI_CKCTRL; + val = in_be32(reg); + val |= (SCC_EPCI_CKCTRL_CRST0 | SCC_EPCI_CKCTRL_CRST1); + out_be32(reg, val); + + /* set base translation registers. (already set by Beat) */ + + /* set base address masks. (already set by Beat) */ + } + + /* release interrupt masks and clear all interrupts */ + reg = epci_base + SCC_EPCI_INTSET; + out_be32(reg, 0x013f011f); /* all interrupts enable */ + reg = epci_base + SCC_EPCI_VIENAB; + val = SCC_EPCI_VIENAB_PMPEE | SCC_EPCI_VIENAB_PMFEE; + out_be32(reg, val); + reg = epci_base + SCC_EPCI_STATUS; + out_be32(reg, 0xffffffff); + reg = epci_base + SCC_EPCI_VISTAT; + out_be32(reg, 0xffffffff); + + /* disable PCI->IB address translation */ + reg = epci_base + SCC_EPCI_VCSR; + val = in_be32(reg); + val &= ~(SCC_EPCI_VCSR_DR | SCC_EPCI_VCSR_AT); + out_be32(reg, val); + + /* set base addresses. (no need to set?) */ + + /* memory space, bus master enable */ + reg = epci_base + PCI_COMMAND; + val = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; + out_be32(reg, val); + + /* endian mode setup */ + reg = epci_base + SCC_EPCI_ECMODE; + val = 0x00550155; + out_be32(reg, val); + + /* set control option */ + reg = epci_base + SCC_EPCI_CNTOPT; + val = in_be32(reg); + val |= SCC_EPCI_CNTOPT_O2PMB; + out_be32(reg, val); + + /* XXX: temporay: set registers for address conversion setup */ + reg = epci_base + SCC_EPCI_CNF10_REG; + out_be32(reg, 0x80000008); + reg = epci_base + SCC_EPCI_CNF14_REG; + out_be32(reg, 0x40000008); + + reg = epci_base + SCC_EPCI_BAM0; + out_be32(reg, 0x80000000); + reg = epci_base + SCC_EPCI_BAM1; + out_be32(reg, 0xe0000000); + + reg = epci_base + SCC_EPCI_PVBAT; + out_be32(reg, 0x80000000); + + if (!hwres) { + /* release external PCI reset */ + reg = epci_base + SCC_EPCI_CLKRST; + val = in_be32(reg); + val |= SCC_EPCI_CLKRST_PCIRST; + out_be32(reg, val); + } + + return 0; +} + +static int __init celleb_setup_epci(struct device_node *node, + struct pci_controller *hose) +{ + struct resource r; + + pr_debug("PCI: celleb_setup_epci()\n"); + + /* + * Note: + * Celleb epci uses cfg_addr and cfg_data member of + * pci_controller structure in irregular way. + * + * cfg_addr is used to map for control registers of + * celleb epci. + * + * cfg_data is used for configuration area of devices + * on Celleb epci buses. + */ + + if (of_address_to_resource(node, 0, &r)) + goto error; + hose->cfg_addr = ioremap(r.start, (r.end - r.start + 1)); + if (!hose->cfg_addr) + goto error; + pr_debug("EPCI: cfg_addr map 0x%016lx->0x%016lx + 0x%016lx\n", + r.start, (unsigned long)hose->cfg_addr, (r.end - r.start + 1)); + + if (of_address_to_resource(node, 2, &r)) + goto error; + hose->cfg_data = ioremap(r.start, (r.end - r.start + 1)); + if (!hose->cfg_data) + goto error; + pr_debug("EPCI: cfg_data map 0x%016lx->0x%016lx + 0x%016lx\n", + r.start, (unsigned long)hose->cfg_data, (r.end - r.start + 1)); + + hose->ops = &celleb_epci_ops; + celleb_epci_init(hose); + + return 0; + +error: + if (hose->cfg_addr) + iounmap(hose->cfg_addr); + + if (hose->cfg_data) + iounmap(hose->cfg_data); + return 1; +} + +struct celleb_phb_spec celleb_epci_spec __initdata = { + .setup = celleb_setup_epci, + .ops = &spiderpci_ops, + .iowa_init = &spiderpci_iowa_init, + .iowa_data = (void *)0, +}; |