aboutsummaryrefslogtreecommitdiffstats
path: root/arch/xtensa/kernel/head.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/xtensa/kernel/head.S')
-rw-r--r--arch/xtensa/kernel/head.S237
1 files changed, 237 insertions, 0 deletions
diff --git a/arch/xtensa/kernel/head.S b/arch/xtensa/kernel/head.S
new file mode 100644
index 0000000..6e9b522
--- /dev/null
+++ b/arch/xtensa/kernel/head.S
@@ -0,0 +1,237 @@
+/*
+ * arch/xtensa/kernel/head.S
+ *
+ * Xtensa Processor startup code.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ *
+ * Chris Zankel <chris@zankel.net>
+ * Marc Gauthier <marc@tensilica.com, marc@alumni.uwaterloo.ca>
+ * Joe Taylor <joe@tensilica.com, joetylr@yahoo.com>
+ * Kevin Chea
+ */
+
+#include <xtensa/cacheasm.h>
+#include <linux/config.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+
+/*
+ * This module contains the entry code for kernel images. It performs the
+ * minimal setup needed to call the generic C routines.
+ *
+ * Prerequisites:
+ *
+ * - The kernel image has been loaded to the actual address where it was
+ * compiled to.
+ * - a2 contains either 0 or a pointer to a list of boot parameters.
+ * (see setup.c for more details)
+ *
+ */
+
+ .macro iterate from, to , cmd
+ .ifeq ((\to - \from) & ~0xfff)
+ \cmd \from
+ iterate "(\from+1)", \to, \cmd
+ .endif
+ .endm
+
+/*
+ * _start
+ *
+ * The bootloader passes a pointer to a list of boot parameters in a2.
+ */
+
+ /* The first bytes of the kernel image must be an instruction, so we
+ * manually allocate and define the literal constant we need for a jx
+ * instruction.
+ */
+
+ .section .head.text, "ax"
+ .globl _start
+_start: _j 2f
+ .align 4
+1: .word _startup
+2: l32r a0, 1b
+ jx a0
+
+ .text
+ .align 4
+_startup:
+
+ /* Disable interrupts and exceptions. */
+
+ movi a0, XCHAL_PS_EXCM_MASK
+ wsr a0, PS
+
+ /* Preserve the pointer to the boot parameter list in EXCSAVE_1 */
+
+ wsr a2, EXCSAVE_1
+
+ /* Start with a fresh windowbase and windowstart. */
+
+ movi a1, 1
+ movi a0, 0
+ wsr a1, WINDOWSTART
+ wsr a0, WINDOWBASE
+ rsync
+
+ /* Set a0 to 0 for the remaining initialization. */
+
+ movi a0, 0
+
+ /* Clear debugging registers. */
+
+#if XCHAL_HAVE_DEBUG
+ wsr a0, IBREAKENABLE
+ wsr a0, ICOUNT
+ movi a1, 15
+ wsr a0, ICOUNTLEVEL
+
+ .macro reset_dbreak num
+ wsr a0, DBREAKC + \num
+ .endm
+
+ iterate 0, XCHAL_NUM_IBREAK-1, reset_dbreak
+#endif
+
+ /* Clear CCOUNT (not really necessary, but nice) */
+
+ wsr a0, CCOUNT # not really necessary, but nice
+
+ /* Disable zero-loops. */
+
+#if XCHAL_HAVE_LOOPS
+ wsr a0, LCOUNT
+#endif
+
+ /* Disable all timers. */
+
+ .macro reset_timer num
+ wsr a0, CCOMPARE_0 + \num
+ .endm
+ iterate 0, XCHAL_NUM_TIMERS-1, reset_timer
+
+ /* Interrupt initialization. */
+
+ movi a2, XCHAL_INTTYPE_MASK_SOFTWARE | XCHAL_INTTYPE_MASK_EXTERN_EDGE
+ wsr a0, INTENABLE
+ wsr a2, INTCLEAR
+
+ /* Disable coprocessors. */
+
+#if XCHAL_CP_NUM > 0
+ wsr a0, CPENABLE
+#endif
+
+ /* Set PS.INTLEVEL=1, PS.WOE=0, kernel stack, PS.EXCM=0
+ *
+ * Note: PS.EXCM must be cleared before using any loop
+ * instructions; otherwise, they are silently disabled, and
+ * at most one iteration of the loop is executed.
+ */
+
+ movi a1, 1
+ wsr a1, PS
+ rsync
+
+ /* Initialize the caches.
+ * Does not include flushing writeback d-cache.
+ * a6, a7 are just working registers (clobbered).
+ */
+
+ icache_reset a2, a3
+ dcache_reset a2, a3
+
+ /* Unpack data sections
+ *
+ * The linker script used to build the Linux kernel image
+ * creates a table located at __boot_reloc_table_start
+ * that contans the information what data needs to be unpacked.
+ *
+ * Uses a2-a7.
+ */
+
+ movi a2, __boot_reloc_table_start
+ movi a3, __boot_reloc_table_end
+
+1: beq a2, a3, 3f # no more entries?
+ l32i a4, a2, 0 # start destination (in RAM)
+ l32i a5, a2, 4 # end desination (in RAM)
+ l32i a6, a2, 8 # start source (in ROM)
+ addi a2, a2, 12 # next entry
+ beq a4, a5, 1b # skip, empty entry
+ beq a4, a6, 1b # skip, source and dest. are the same
+
+2: l32i a7, a6, 0 # load word
+ addi a6, a6, 4
+ s32i a7, a4, 0 # store word
+ addi a4, a4, 4
+ bltu a4, a5, 2b
+ j 1b
+
+3:
+ /* All code and initialized data segments have been copied.
+ * Now clear the BSS segment.
+ */
+
+ movi a2, _bss_start # start of BSS
+ movi a3, _bss_end # end of BSS
+
+1: addi a2, a2, 4
+ s32i a0, a2, 0
+ blt a2, a3, 1b
+
+#if XCHAL_DCACHE_IS_WRITEBACK
+
+ /* After unpacking, flush the writeback cache to memory so the
+ * instructions/data are available.
+ */
+
+ dcache_writeback_all a2, a3
+#endif
+
+ /* Setup stack and enable window exceptions (keep irqs disabled) */
+
+ movi a1, init_thread_union
+ addi a1, a1, KERNEL_STACK_SIZE
+
+ movi a2, 0x00040001 # WOE=1, INTLEVEL=1, UM=0
+ wsr a2, PS # (enable reg-windows; progmode stack)
+ rsync
+
+ /* Set up EXCSAVE[DEBUGLEVEL] to point to the Debug Exception Handler.*/
+
+ movi a2, debug_exception
+ wsr a2, EXCSAVE + XCHAL_DEBUGLEVEL
+
+ /* Set up EXCSAVE[1] to point to the exc_table. */
+
+ movi a6, exc_table
+ xsr a6, EXCSAVE_1
+
+ /* init_arch kick-starts the linux kernel */
+
+ movi a4, init_arch
+ callx4 a4
+
+ movi a4, start_kernel
+ callx4 a4
+
+should_never_return:
+ j should_never_return
+
+ /* Define some common data structures here. We define them
+ * here in this assembly file due to their unusual alignment
+ * requirements.
+ */
+
+ .comm swapper_pg_dir,PAGE_SIZE,PAGE_SIZE
+ .comm empty_bad_page_table,PAGE_SIZE,PAGE_SIZE
+ .comm empty_bad_page,PAGE_SIZE,PAGE_SIZE
+ .comm empty_zero_page,PAGE_SIZE,PAGE_SIZE
+