1 files changed, 104 insertions, 145 deletions

diff --git a/drivers/acpi/acpica/evxfevnt.c b/drivers/acpi/acpica/evxfevnt.c
index 18b3f14..0ec900d 100644
--- a/drivers/acpi/acpica/evxfevnt.c
+++ b/drivers/acpi/acpica/evxfevnt.c
@@ -213,101 +213,71 @@ ACPI_EXPORT_SYMBOL(acpi_enable_event)
 
 /*******************************************************************************
  *
- * FUNCTION:    acpi_clear_and_enable_gpe
- *
- * PARAMETERS:  gpe_event_info  - GPE to enable
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Clear the given GPE from stale events and enable it.
- *
- ******************************************************************************/
-static acpi_status
-acpi_clear_and_enable_gpe(struct acpi_gpe_event_info *gpe_event_info)
-{
-	acpi_status status;
-
-	/*
-	 * We will only allow a GPE to be enabled if it has either an
-	 * associated method (_Lxx/_Exx) or a handler. Otherwise, the
-	 * GPE will be immediately disabled by acpi_ev_gpe_dispatch the
-	 * first time it fires.
-	 */
-	if (!(gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK)) {
-		return_ACPI_STATUS(AE_NO_HANDLER);
-	}
-
-	/* Clear the GPE (of stale events) */
-	status = acpi_hw_clear_gpe(gpe_event_info);
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
-	}
-
-	/* Enable the requested GPE */
-	status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_ENABLE);
-
-	return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_set_gpe
+ * FUNCTION:    acpi_gpe_wakeup
  *
  * PARAMETERS:  gpe_device      - Parent GPE Device. NULL for GPE0/GPE1
  *              gpe_number      - GPE level within the GPE block
- *              action          - ACPI_GPE_ENABLE or ACPI_GPE_DISABLE
+ *              Action          - Enable or Disable
  *
  * RETURN:      Status
  *
- * DESCRIPTION: Enable or disable an individual GPE. This function bypasses
- *              the reference count mechanism used in the acpi_enable_gpe and
- *              acpi_disable_gpe interfaces -- and should be used with care.
- *
- * Note: Typically used to disable a runtime GPE for short period of time,
- * then re-enable it, without disturbing the existing reference counts. This
- * is useful, for example, in the Embedded Controller (EC) driver.
+ * DESCRIPTION: Set or clear the GPE's wakeup enable mask bit.
  *
  ******************************************************************************/
-acpi_status acpi_set_gpe(acpi_handle gpe_device, u32 gpe_number, u8 action)
+acpi_status acpi_gpe_wakeup(acpi_handle gpe_device, u32 gpe_number, u8 action)
 {
+	acpi_status status = AE_OK;
 	struct acpi_gpe_event_info *gpe_event_info;
-	acpi_status status;
+	struct acpi_gpe_register_info *gpe_register_info;
 	acpi_cpu_flags flags;
+	u32 register_bit;
 
-	ACPI_FUNCTION_TRACE(acpi_set_gpe);
+	ACPI_FUNCTION_TRACE(acpi_gpe_wakeup);
 
 	flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
 
 	/* Ensure that we have a valid GPE number */
 
 	gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
-	if (!gpe_event_info) {
+	if (!gpe_event_info || !(gpe_event_info->flags & ACPI_GPE_CAN_WAKE)) {
 		status = AE_BAD_PARAMETER;
 		goto unlock_and_exit;
 	}
 
+	gpe_register_info = gpe_event_info->register_info;
+	if (!gpe_register_info) {
+		status = AE_NOT_EXIST;
+		goto unlock_and_exit;
+	}
+
+	register_bit =
+	    acpi_hw_get_gpe_register_bit(gpe_event_info, gpe_register_info);
+
 	/* Perform the action */
 
 	switch (action) {
 	case ACPI_GPE_ENABLE:
-		status = acpi_clear_and_enable_gpe(gpe_event_info);
+		ACPI_SET_BIT(gpe_register_info->enable_for_wake,
+			     (u8)register_bit);
 		break;
 
 	case ACPI_GPE_DISABLE:
-		status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_DISABLE);
+		ACPI_CLEAR_BIT(gpe_register_info->enable_for_wake,
+			       (u8)register_bit);
 		break;
 
 	default:
+		ACPI_ERROR((AE_INFO, "%u, Invalid action", action));
 		status = AE_BAD_PARAMETER;
 		break;
 	}
 
-      unlock_and_exit:
+unlock_and_exit:
 	acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
 	return_ACPI_STATUS(status);
 }
 
-ACPI_EXPORT_SYMBOL(acpi_set_gpe)
+ACPI_EXPORT_SYMBOL(acpi_gpe_wakeup)
 
 /*******************************************************************************
  *
@@ -315,17 +285,14 @@ ACPI_EXPORT_SYMBOL(acpi_set_gpe)
  *
  * PARAMETERS:  gpe_device      - Parent GPE Device. NULL for GPE0/GPE1
  *              gpe_number      - GPE level within the GPE block
- *              gpe_type        - ACPI_GPE_TYPE_RUNTIME or ACPI_GPE_TYPE_WAKE
- *                                or both
  *
  * RETURN:      Status
  *
  * DESCRIPTION: Add a reference to a GPE. On the first reference, the GPE is
- *              hardware-enabled (for runtime GPEs), or the GPE register mask
- *              is updated (for wake GPEs).
+ *              hardware-enabled.
  *
  ******************************************************************************/
-acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number, u8 gpe_type)
+acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number)
 {
 	acpi_status status = AE_OK;
 	struct acpi_gpe_event_info *gpe_event_info;
@@ -333,12 +300,6 @@ acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number, u8 gpe_type)
 
 	ACPI_FUNCTION_TRACE(acpi_enable_gpe);
 
-	/* Parameter validation */
-
-	if (!gpe_type || (gpe_type & ~ACPI_GPE_TYPE_WAKE_RUN)) {
-		return_ACPI_STATUS(AE_BAD_PARAMETER);
-	}
-
 	flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
 
 	/* Ensure that we have a valid GPE number */
@@ -349,46 +310,19 @@ acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number, u8 gpe_type)
 		goto unlock_and_exit;
 	}
 
-	if (gpe_type & ACPI_GPE_TYPE_RUNTIME) {
-		if (gpe_event_info->runtime_count == ACPI_UINT8_MAX) {
-			status = AE_LIMIT;	/* Too many references */
-			goto unlock_and_exit;
-		}
-
-		gpe_event_info->runtime_count++;
-		if (gpe_event_info->runtime_count == 1) {
-			status = acpi_ev_update_gpe_enable_masks(gpe_event_info);
-			if (ACPI_SUCCESS(status)) {
-				status = acpi_clear_and_enable_gpe(gpe_event_info);
-			}
-
-			if (ACPI_FAILURE(status)) {
-				gpe_event_info->runtime_count--;
-				goto unlock_and_exit;
-			}
-		}
+	if (gpe_event_info->runtime_count == ACPI_UINT8_MAX) {
+		status = AE_LIMIT;	/* Too many references */
+		goto unlock_and_exit;
 	}
 
-	if (gpe_type & ACPI_GPE_TYPE_WAKE) {
-		/* The GPE must have the ability to wake the system */
-
-		if (!(gpe_event_info->flags & ACPI_GPE_CAN_WAKE)) {
-			status = AE_TYPE;
-			goto unlock_and_exit;
+	gpe_event_info->runtime_count++;
+	if (gpe_event_info->runtime_count == 1) {
+		status = acpi_ev_update_gpe_enable_mask(gpe_event_info);
+		if (ACPI_SUCCESS(status)) {
+			status = acpi_ev_enable_gpe(gpe_event_info);
 		}
-
-		if (gpe_event_info->wakeup_count == ACPI_UINT8_MAX) {
-			status = AE_LIMIT;	/* Too many references */
-			goto unlock_and_exit;
-		}
-
-		/*
-		 * Update the enable mask on the first wakeup reference. Wake GPEs
-		 * are only hardware-enabled just before sleeping.
-		 */
-		gpe_event_info->wakeup_count++;
-		if (gpe_event_info->wakeup_count == 1) {
-			status = acpi_ev_update_gpe_enable_masks(gpe_event_info);
+		if (ACPI_FAILURE(status)) {
+			gpe_event_info->runtime_count--;
 		}
 	}
 
@@ -404,8 +338,6 @@ ACPI_EXPORT_SYMBOL(acpi_enable_gpe)
  *
  * PARAMETERS:  gpe_device      - Parent GPE Device. NULL for GPE0/GPE1
  *              gpe_number      - GPE level within the GPE block
- *              gpe_type        - ACPI_GPE_TYPE_RUNTIME or ACPI_GPE_TYPE_WAKE
- *                                or both
  *
  * RETURN:      Status
  *
@@ -414,7 +346,7 @@ ACPI_EXPORT_SYMBOL(acpi_enable_gpe)
  *              the GPE mask bit disabled (for wake GPEs)
  *
  ******************************************************************************/
-acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number, u8 gpe_type)
+acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number)
 {
 	acpi_status status = AE_OK;
 	struct acpi_gpe_event_info *gpe_event_info;
@@ -422,12 +354,6 @@ acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number, u8 gpe_type
 
 	ACPI_FUNCTION_TRACE(acpi_disable_gpe);
 
-	/* Parameter validation */
-
-	if (!gpe_type || (gpe_type & ~ACPI_GPE_TYPE_WAKE_RUN)) {
-		return_ACPI_STATUS(AE_BAD_PARAMETER);
-	}
-
 	flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
 
 	/* Ensure that we have a valid GPE number */
@@ -440,41 +366,21 @@ acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number, u8 gpe_type
 
 	/* Hardware-disable a runtime GPE on removal of the last reference */
 
-	if (gpe_type & ACPI_GPE_TYPE_RUNTIME) {
-		if (!gpe_event_info->runtime_count) {
-			status = AE_LIMIT;	/* There are no references to remove */
-			goto unlock_and_exit;
-		}
-
-		gpe_event_info->runtime_count--;
-		if (!gpe_event_info->runtime_count) {
-			status = acpi_ev_update_gpe_enable_masks(gpe_event_info);
-			if (ACPI_SUCCESS(status)) {
-				status = acpi_hw_low_set_gpe(gpe_event_info,
-							     ACPI_GPE_DISABLE);
-			}
-
-			if (ACPI_FAILURE(status)) {
-				gpe_event_info->runtime_count++;
-				goto unlock_and_exit;
-			}
-		}
+	if (!gpe_event_info->runtime_count) {
+		status = AE_LIMIT;	/* There are no references to remove */
+		goto unlock_and_exit;
 	}
 
-	/*
-	 * Update masks for wake GPE on removal of the last reference.
-	 * No need to hardware-disable wake GPEs here, they are not currently
-	 * enabled.
-	 */
-	if (gpe_type & ACPI_GPE_TYPE_WAKE) {
-		if (!gpe_event_info->wakeup_count) {
-			status = AE_LIMIT;	/* There are no references to remove */
-			goto unlock_and_exit;
+	gpe_event_info->runtime_count--;
+	if (!gpe_event_info->runtime_count) {
+		status = acpi_ev_update_gpe_enable_mask(gpe_event_info);
+		if (ACPI_SUCCESS(status)) {
+			status =
+			    acpi_hw_low_set_gpe(gpe_event_info,
+						ACPI_GPE_DISABLE);
 		}
-
-		gpe_event_info->wakeup_count--;
-		if (!gpe_event_info->wakeup_count) {
-			status = acpi_ev_update_gpe_enable_masks(gpe_event_info);
+		if (ACPI_FAILURE(status)) {
+			gpe_event_info->runtime_count++;
 		}
 	}
 
@@ -486,6 +392,59 @@ ACPI_EXPORT_SYMBOL(acpi_disable_gpe)
 
 /*******************************************************************************
  *
+ * FUNCTION:    acpi_gpe_can_wake
+ *
+ * PARAMETERS:  gpe_device      - Parent GPE Device. NULL for GPE0/GPE1
+ *              gpe_number      - GPE level within the GPE block
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Set the ACPI_GPE_CAN_WAKE flag for the given GPE.  If the GPE
+ *              has a corresponding method and is currently enabled, disable it
+ *              (GPEs with corresponding methods are enabled unconditionally
+ *              during initialization, but GPEs that can wake up are expected
+ *              to be initially disabled).
+ *
+ ******************************************************************************/
+acpi_status acpi_gpe_can_wake(acpi_handle gpe_device, u32 gpe_number)
+{
+	acpi_status status = AE_OK;
+	struct acpi_gpe_event_info *gpe_event_info;
+	acpi_cpu_flags flags;
+	u8 disable = 0;
+
+	ACPI_FUNCTION_TRACE(acpi_gpe_can_wake);
+
+	flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
+
+	/* Ensure that we have a valid GPE number */
+
+	gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
+	if (!gpe_event_info) {
+		status = AE_BAD_PARAMETER;
+		goto unlock_and_exit;
+	}
+
+	if (gpe_event_info->flags & ACPI_GPE_CAN_WAKE) {
+		goto unlock_and_exit;
+	}
+
+	gpe_event_info->flags |= ACPI_GPE_CAN_WAKE;
+	disable = (gpe_event_info->flags & ACPI_GPE_DISPATCH_METHOD)
+		&& gpe_event_info->runtime_count;
+
+unlock_and_exit:
+	acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
+
+	if (disable)
+		status = acpi_disable_gpe(gpe_device, gpe_number);
+
+	return_ACPI_STATUS(status);
+}
+ACPI_EXPORT_SYMBOL(acpi_gpe_can_wake)
+
+/*******************************************************************************
+ *
  * FUNCTION:    acpi_disable_event
  *
  * PARAMETERS:  Event           - The fixed eventto be enabled
@@ -800,7 +759,7 @@ acpi_install_gpe_block(acpi_handle gpe_device,
 
 	obj_desc->device.gpe_block = gpe_block;
 
-	/* Run the _PRW methods and enable the runtime GPEs in the new block */
+	/* Enable the runtime GPEs in the new block */
 
 	status = acpi_ev_initialize_gpe_block(node, gpe_block);