diff options
Diffstat (limited to 'drivers/ata')
-rw-r--r-- | drivers/ata/Kconfig | 9 | ||||
-rw-r--r-- | drivers/ata/Makefile | 1 | ||||
-rw-r--r-- | drivers/ata/pata_palmld.c | 150 |
3 files changed, 160 insertions, 0 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 9120717..2aa1908 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -535,6 +535,15 @@ config PATA_OPTIDMA If unsure, say N. +config PATA_PALMLD + tristate "Palm LifeDrive PATA support" + depends on MACH_PALMLD + help + This option enables support for Palm LifeDrive's internal ATA + port via the new ATA layer. + + If unsure, say N. + config PATA_PCMCIA tristate "PCMCIA PATA support" depends on PCMCIA diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index 7f1ecf9..1558059 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -50,6 +50,7 @@ obj-$(CONFIG_PATA_MPC52xx) += pata_mpc52xx.o obj-$(CONFIG_PATA_MARVELL) += pata_marvell.o obj-$(CONFIG_PATA_MPIIX) += pata_mpiix.o obj-$(CONFIG_PATA_OLDPIIX) += pata_oldpiix.o +obj-$(CONFIG_PATA_PALMLD) += pata_palmld.o obj-$(CONFIG_PATA_PCMCIA) += pata_pcmcia.o obj-$(CONFIG_PATA_PDC2027X) += pata_pdc2027x.o obj-$(CONFIG_PATA_PDC_OLD) += pata_pdc202xx_old.o diff --git a/drivers/ata/pata_palmld.c b/drivers/ata/pata_palmld.c new file mode 100644 index 0000000..11fb4cc --- /dev/null +++ b/drivers/ata/pata_palmld.c @@ -0,0 +1,150 @@ +/* + * drivers/ata/pata_palmld.c + * + * Driver for IDE channel in Palm LifeDrive + * + * Based on research of: + * Alex Osborne <ato@meshy.org> + * + * Rewrite for mainline: + * Marek Vasut <marek.vasut@gmail.com> + * + * Rewritten version based on pata_ixp4xx_cf.c: + * ixp4xx PATA/Compact Flash driver + * Copyright (C) 2006-07 Tower Technologies + * Author: Alessandro Zummo <a.zummo@towertech.it> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/libata.h> +#include <linux/irq.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/gpio.h> + +#include <scsi/scsi_host.h> +#include <mach/palmld.h> + +#define DRV_NAME "pata_palmld" + +static struct scsi_host_template palmld_sht = { + ATA_PIO_SHT(DRV_NAME), +}; + +static struct ata_port_operations palmld_port_ops = { + .inherits = &ata_sff_port_ops, + .sff_data_xfer = ata_sff_data_xfer_noirq, + .cable_detect = ata_cable_40wire, +}; + +static __devinit int palmld_pata_probe(struct platform_device *pdev) +{ + struct ata_host *host; + struct ata_port *ap; + void __iomem *mem; + int ret; + + /* allocate host */ + host = ata_host_alloc(&pdev->dev, 1); + if (!host) + return -ENOMEM; + + /* remap drive's physical memory address */ + mem = devm_ioremap(&pdev->dev, PALMLD_IDE_PHYS, 0x1000); + if (!mem) + return -ENOMEM; + + /* request and activate power GPIO, IRQ GPIO */ + ret = gpio_request(GPIO_NR_PALMLD_IDE_PWEN, "HDD PWR"); + if (ret) + goto err1; + ret = gpio_direction_output(GPIO_NR_PALMLD_IDE_PWEN, 1); + if (ret) + goto err2; + + ret = gpio_request(GPIO_NR_PALMLD_IDE_RESET, "HDD RST"); + if (ret) + goto err2; + ret = gpio_direction_output(GPIO_NR_PALMLD_IDE_RESET, 0); + if (ret) + goto err3; + + /* reset the drive */ + gpio_set_value(GPIO_NR_PALMLD_IDE_RESET, 0); + msleep(30); + gpio_set_value(GPIO_NR_PALMLD_IDE_RESET, 1); + msleep(30); + + /* setup the ata port */ + ap = host->ports[0]; + ap->ops = &palmld_port_ops; + ap->pio_mask = ATA_PIO4; + ap->flags |= ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY | ATA_FLAG_PIO_POLLING; + + /* memory mapping voodoo */ + ap->ioaddr.cmd_addr = mem + 0x10; + ap->ioaddr.altstatus_addr = mem + 0xe; + ap->ioaddr.ctl_addr = mem + 0xe; + + /* start the port */ + ata_sff_std_ports(&ap->ioaddr); + + /* activate host */ + return ata_host_activate(host, 0, NULL, IRQF_TRIGGER_RISING, + &palmld_sht); + +err3: + gpio_free(GPIO_NR_PALMLD_IDE_RESET); +err2: + gpio_free(GPIO_NR_PALMLD_IDE_PWEN); +err1: + return ret; +} + +static __devexit int palmld_pata_remove(struct platform_device *dev) +{ + struct ata_host *host = platform_get_drvdata(dev); + + ata_host_detach(host); + + /* power down the HDD */ + gpio_set_value(GPIO_NR_PALMLD_IDE_PWEN, 0); + + gpio_free(GPIO_NR_PALMLD_IDE_RESET); + gpio_free(GPIO_NR_PALMLD_IDE_PWEN); + + return 0; +} + +static struct platform_driver palmld_pata_platform_driver = { + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, + .probe = palmld_pata_probe, + .remove = __devexit_p(palmld_pata_remove), +}; + +static int __init palmld_pata_init(void) +{ + return platform_driver_register(&palmld_pata_platform_driver); +} + +static void __exit palmld_pata_exit(void) +{ + platform_driver_unregister(&palmld_pata_platform_driver); +} + +MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>"); +MODULE_DESCRIPTION("PalmLD PATA driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRV_NAME); + +module_init(palmld_pata_init); +module_exit(palmld_pata_exit); |