diff options
Diffstat (limited to 'drivers/net/wireless/atmel_cs.c')
| -rw-r--r-- | drivers/net/wireless/atmel_cs.c | 70 |
1 files changed, 5 insertions, 65 deletions
diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c index 3240791..c2746fc 100644 --- a/drivers/net/wireless/atmel_cs.c +++ b/drivers/net/wireless/atmel_cs.c @@ -85,41 +85,7 @@ static void atmel_release(struct pcmcia_device *link); static void atmel_detach(struct pcmcia_device *p_dev); -/* - You'll also need to prototype all the functions that will actually - be used to talk to your device. See 'pcmem_cs' for a good example - of a fully self-sufficient driver; the other drivers rely more or - less on other parts of the kernel. -*/ - -/* - A linked list of "instances" of the atmelnet device. Each actual - PCMCIA card corresponds to one device instance, and is described - by one struct pcmcia_device structure (defined in ds.h). - - You may not want to use a linked list for this -- for example, the - memory card driver uses an array of struct pcmcia_device pointers, where minor - device numbers are used to derive the corresponding array index. -*/ - -/* - A driver needs to provide a dev_node_t structure for each device - on a card. In some cases, there is only one device per card (for - example, ethernet cards, modems). In other cases, there may be - many actual or logical devices (SCSI adapters, memory cards with - multiple partitions). The dev_node_t structures need to be kept - in a linked list starting at the 'dev' field of a struct pcmcia_device - structure. We allocate them in the card's private data structure, - because they generally shouldn't be allocated dynamically. - - In this case, we also provide a flag to indicate if a device is - "stopped" due to a power management event, or card ejection. The - device IO routines can use a flag like this to throttle IO to a - card that is not ready to accept it. -*/ - typedef struct local_info_t { - dev_node_t node; struct net_device *eth_dev; } local_info_t; @@ -141,10 +107,6 @@ static int atmel_probe(struct pcmcia_device *p_dev) dev_dbg(&p_dev->dev, "atmel_attach()\n"); - /* Interrupt setup */ - p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; - p_dev->irq.Handler = NULL; - /* General socket configuration defaults can go here. In this client, we assume very little, and rely on the CIS for almost @@ -226,9 +188,7 @@ static int atmel_config_check(struct pcmcia_device *p_dev, else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM)) p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000; - /* Do we need to allocate an interrupt? */ - if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1) - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; @@ -278,15 +238,9 @@ static int atmel_config(struct pcmcia_device *link) if (pcmcia_loop_config(link, atmel_config_check, NULL)) goto failed; - /* - Allocate an interrupt line. Note that this does not assign a - handler to the interrupt, unless the 'Handler' member of the - irq structure is initialized. - */ - if (link->conf.Attributes & CONF_ENABLE_IRQ) { - ret = pcmcia_request_irq(link, &link->irq); - if (ret) - goto failed; + if (!link->irq) { + dev_err(&link->dev, "atmel: cannot assign IRQ: check that CONFIG_ISA is set in kernel config."); + goto failed; } /* @@ -298,14 +252,8 @@ static int atmel_config(struct pcmcia_device *link) if (ret) goto failed; - if (link->irq.AssignedIRQ == 0) { - printk(KERN_ALERT - "atmel: cannot assign IRQ: check that CONFIG_ISA is set in kernel config."); - goto failed; - } - ((local_info_t*)link->priv)->eth_dev = - init_atmel_card(link->irq.AssignedIRQ, + init_atmel_card(link->irq, link->io.BasePort1, did ? did->driver_info : ATMEL_FW_TYPE_NONE, &link->dev, @@ -315,14 +263,6 @@ static int atmel_config(struct pcmcia_device *link) goto failed; - /* - At this point, the dev_node_t structure(s) need to be - initialized and arranged in a linked list at link->dev_node. - */ - strcpy(dev->node.dev_name, ((local_info_t*)link->priv)->eth_dev->name ); - dev->node.major = dev->node.minor = 0; - link->dev_node = &dev->node; - return 0; failed: |