diff options
Diffstat (limited to 'drivers/scsi')
-rw-r--r-- | drivers/scsi/a100u2w.c | 2 | ||||
-rw-r--r-- | drivers/scsi/aacraid/commsup.c | 2 | ||||
-rw-r--r-- | drivers/scsi/aic7xxx_old/aic7xxx.seq | 2 | ||||
-rw-r--r-- | drivers/scsi/aic94xx/aic94xx_reg_def.h | 4 | ||||
-rw-r--r-- | drivers/scsi/aic94xx/aic94xx_seq.c | 6 | ||||
-rw-r--r-- | drivers/scsi/bfa/bfa_fcpim.c | 2 | ||||
-rw-r--r-- | drivers/scsi/bfa/bfa_fcs_lport.c | 2 | ||||
-rw-r--r-- | drivers/scsi/dc395x.c | 8 | ||||
-rw-r--r-- | drivers/scsi/libfc/fc_fcp.c | 2 | ||||
-rw-r--r-- | drivers/scsi/lpfc/lpfc_attr.c | 2 | ||||
-rw-r--r-- | drivers/scsi/lpfc/lpfc_hbadisc.c | 2 | ||||
-rw-r--r-- | drivers/scsi/lpfc/lpfc_sli.c | 2 | ||||
-rw-r--r-- | drivers/scsi/megaraid.h | 2 | ||||
-rw-r--r-- | drivers/scsi/pm8001/pm8001_init.c | 2 | ||||
-rw-r--r-- | drivers/scsi/scsi_netlink.c | 2 | ||||
-rw-r--r-- | drivers/scsi/sym53c8xx_2/sym_glue.c | 2 |
16 files changed, 22 insertions, 22 deletions
diff --git a/drivers/scsi/a100u2w.c b/drivers/scsi/a100u2w.c index dbbc601..7cb5756 100644 --- a/drivers/scsi/a100u2w.c +++ b/drivers/scsi/a100u2w.c @@ -416,7 +416,7 @@ static u8 orc_load_firmware(struct orc_host * host) /* Go back and check they match */ outb(PRGMRST | DOWNLOAD, host->base + ORC_RISCCTL); /* Reset program count 0 */ - bios_addr -= 0x1000; /* Reset the BIOS adddress */ + bios_addr -= 0x1000; /* Reset the BIOS address */ for (i = 0, data32_ptr = (u8 *) & data32; /* Check the code */ i < 0x1000; /* Firmware code size = 4K */ i++, bios_addr++) { diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c index afc9aeb..060ac4b 100644 --- a/drivers/scsi/aacraid/commsup.c +++ b/drivers/scsi/aacraid/commsup.c @@ -91,7 +91,7 @@ void aac_fib_map_free(struct aac_dev *dev) * aac_fib_setup - setup the fibs * @dev: Adapter to set up * - * Allocate the PCI space for the fibs, map it and then intialise the + * Allocate the PCI space for the fibs, map it and then initialise the * fib area, the unmapped fib data and also the free list */ diff --git a/drivers/scsi/aic7xxx_old/aic7xxx.seq b/drivers/scsi/aic7xxx_old/aic7xxx.seq index 5997e7c..1565be9 100644 --- a/drivers/scsi/aic7xxx_old/aic7xxx.seq +++ b/drivers/scsi/aic7xxx_old/aic7xxx.seq @@ -1178,7 +1178,7 @@ notFound: /* * Retrieve an SCB by SCBID first searching the disconnected list falling * back to DMA'ing the SCB down from the host. This routine assumes that - * ARG_1 is the SCBID of interrest and that SINDEX is the position in the + * ARG_1 is the SCBID of interest and that SINDEX is the position in the * disconnected list to start the search from. If SINDEX is SCB_LIST_NULL, * we go directly to the host for the SCB. */ diff --git a/drivers/scsi/aic94xx/aic94xx_reg_def.h b/drivers/scsi/aic94xx/aic94xx_reg_def.h index 28aaf34..40273a7 100644 --- a/drivers/scsi/aic94xx/aic94xx_reg_def.h +++ b/drivers/scsi/aic94xx/aic94xx_reg_def.h @@ -1689,7 +1689,7 @@ #define PHY_START_CAL 0x01 /* - * HST_PCIX2 Registers, Addresss Range: (0x00-0xFC) + * HST_PCIX2 Registers, Address Range: (0x00-0xFC) */ #define PCIX_REG_BASE_ADR 0xB8040000 @@ -1802,7 +1802,7 @@ #define PCIC_TP_CTRL 0xFC /* - * EXSI Registers, Addresss Range: (0x00-0xFC) + * EXSI Registers, Address Range: (0x00-0xFC) */ #define EXSI_REG_BASE_ADR REG_BASE_ADDR_EXSI diff --git a/drivers/scsi/aic94xx/aic94xx_seq.c b/drivers/scsi/aic94xx/aic94xx_seq.c index 7437461..390168f 100644 --- a/drivers/scsi/aic94xx/aic94xx_seq.c +++ b/drivers/scsi/aic94xx/aic94xx_seq.c @@ -797,7 +797,7 @@ static void asd_init_lseq_mdp(struct asd_ha_struct *asd_ha, int lseq) int j; /* Start from Page 1 of Mode 0 and 1. */ moffs = LSEQ_PAGE_SIZE + i*LSEQ_MODE_SCRATCH_SIZE; - /* All the fields of page 1 can be intialized to 0. */ + /* All the fields of page 1 can be initialized to 0. */ for (j = 0; j < LSEQ_PAGE_SIZE; j += 4) asd_write_reg_dword(asd_ha, LmSCRATCH(lseq)+moffs+j,0); } @@ -938,7 +938,7 @@ static void asd_init_cseq_cio(struct asd_ha_struct *asd_ha) asd_write_reg_dword(asd_ha, SCBPRO, 0); asd_write_reg_dword(asd_ha, CSEQCON, 0); - /* Intialize CSEQ Mode 11 Interrupt Vectors. + /* Initialize CSEQ Mode 11 Interrupt Vectors. * The addresses are 16 bit wide and in dword units. * The values of their macros are in byte units. * Thus we have to divide by 4. */ @@ -961,7 +961,7 @@ static void asd_init_cseq_cio(struct asd_ha_struct *asd_ha) asd_write_reg_word(asd_ha, CPRGMCNT, cseq_idle_loop); for (i = 0; i < 8; i++) { - /* Intialize Mode n Link m Interrupt Enable. */ + /* Initialize Mode n Link m Interrupt Enable. */ asd_write_reg_dword(asd_ha, CMnINTEN(i), EN_CMnRSPMBXF); /* Initialize Mode n Request Mailbox. */ asd_write_reg_dword(asd_ha, CMnREQMBX(i), 0); diff --git a/drivers/scsi/bfa/bfa_fcpim.c b/drivers/scsi/bfa/bfa_fcpim.c index 33c8dd5..aabbf3d 100644 --- a/drivers/scsi/bfa/bfa_fcpim.c +++ b/drivers/scsi/bfa/bfa_fcpim.c @@ -2092,7 +2092,7 @@ bfa_ioim_sm_cleanup_qfull(struct bfa_ioim_s *ioim, enum bfa_ioim_event event) case BFA_IOIM_SM_ABORT: /** - * IO is alraedy being cleaned up implicitly + * IO is already being cleaned up implicitly */ ioim->io_cbfn = __bfa_cb_ioim_abort; break; diff --git a/drivers/scsi/bfa/bfa_fcs_lport.c b/drivers/scsi/bfa/bfa_fcs_lport.c index b522bf3..b7aa23a 100644 --- a/drivers/scsi/bfa/bfa_fcs_lport.c +++ b/drivers/scsi/bfa/bfa_fcs_lport.c @@ -5742,7 +5742,7 @@ bfa_cb_lps_fdisc_comp(void *bfad, void *uarg, bfa_status_t status) switch (status) { case BFA_STATUS_OK: /* - * Initialiaze the V-Port fields + * Initialize the V-Port fields */ __vport_fcid(vport) = bfa_lps_get_pid(vport->lps); vport->vport_stats.fdisc_accepts++; diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c index 54f50b0..31bbfb2 100644 --- a/drivers/scsi/dc395x.c +++ b/drivers/scsi/dc395x.c @@ -3795,7 +3795,7 @@ static struct DeviceCtlBlk *device_alloc(struct AdapterCtlBlk *acb, * adapter_add_device - Adds the device instance to the adaptor instance. * * @acb: The adapter device to be updated - * @dcb: A newly created and intialised device instance to add. + * @dcb: A newly created and initialised device instance to add. **/ static void adapter_add_device(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb) @@ -4497,7 +4497,7 @@ static void __devinit adapter_init_chip(struct AdapterCtlBlk *acb) * init_adapter - Grab the resource for the card, setup the adapter * information, set the card into a known state, create the various * tables etc etc. This basically gets all adapter information all up - * to date, intialised and gets the chip in sync with it. + * to date, initialised and gets the chip in sync with it. * * @host: This hosts adapter structure * @io_port: The base I/O port @@ -4788,7 +4788,7 @@ static void banner_display(void) * that it finds in the system. The pci_dev strcuture indicates which * instance we are being called from. * - * @dev: The PCI device to intialize. + * @dev: The PCI device to initialize. * @id: Looks like a pointer to the entry in our pci device table * that was actually matched by the PCI subsystem. * @@ -4859,7 +4859,7 @@ fail: * dc395x_remove_one - Called to remove a single instance of the * adapter. * - * @dev: The PCI device to intialize. + * @dev: The PCI device to initialize. **/ static void __devexit dc395x_remove_one(struct pci_dev *dev) { diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c index c797f6b..54a6ec8 100644 --- a/drivers/scsi/libfc/fc_fcp.c +++ b/drivers/scsi/libfc/fc_fcp.c @@ -1212,7 +1212,7 @@ static void fc_lun_reset_send(unsigned long data) /** * fc_lun_reset() - Send a LUN RESET command to a device * and wait for the reply - * @lport: The local port to sent the comand on + * @lport: The local port to sent the command on * @fsp: The FCP packet that identifies the LUN to be reset * @id: The SCSI command ID * @lun: The LUN ID to be reset diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index f681eea..0e4abb9 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -1339,7 +1339,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \ } /** - * lpfc_param_init - Intializes a cfg attribute + * lpfc_param_init - Initializes a cfg attribute * * Description: * Macro that given an attr e.g. hba_queue_depth expands diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index a345dde..2a6866e 100644 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -2614,7 +2614,7 @@ lpfc_mbx_process_link_up(struct lpfc_hba *phba, READ_LA_VAR *la) if (unlikely(!fcf_record)) { lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI, - "2554 Could not allocate memmory for " + "2554 Could not allocate memory for " "fcf record\n"); rc = -ENODEV; goto out; diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 0d1e187..c5614cf 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -9619,7 +9619,7 @@ lpfc_sli4_intr_handler(int irq, void *dev_id) * lpfc_sli4_queue_free - free a queue structure and associated memory * @queue: The queue structure to free. * - * This function frees a queue structure and the DMAable memeory used for + * This function frees a queue structure and the DMAable memory used for * the host resident queue. This function must be called after destroying the * queue on the HBA. **/ diff --git a/drivers/scsi/megaraid.h b/drivers/scsi/megaraid.h index 2b4a048..deb24ad 100644 --- a/drivers/scsi/megaraid.h +++ b/drivers/scsi/megaraid.h @@ -13,7 +13,7 @@ */ /* - * Comand coalescing - This feature allows the driver to be able to combine + * Command coalescing - This feature allows the driver to be able to combine * two or more commands and issue as one command in order to boost I/O * performance. Useful if the nature of the I/O is sequential. It is not very * useful for random natured I/Os. diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c index f8c86b2..b95285f 100644 --- a/drivers/scsi/pm8001/pm8001_init.c +++ b/drivers/scsi/pm8001/pm8001_init.c @@ -603,7 +603,7 @@ static u32 pm8001_request_irq(struct pm8001_hba_info *pm8001_ha) #endif intx: - /* intialize the INT-X interrupt */ + /* initialize the INT-X interrupt */ rc = request_irq(pdev->irq, irq_handler, IRQF_SHARED, DRV_NAME, SHOST_TO_SAS_HA(pm8001_ha->shost)); return rc; diff --git a/drivers/scsi/scsi_netlink.c b/drivers/scsi/scsi_netlink.c index d53e650..a2ed201 100644 --- a/drivers/scsi/scsi_netlink.c +++ b/drivers/scsi/scsi_netlink.c @@ -477,7 +477,7 @@ EXPORT_SYMBOL_GPL(scsi_nl_remove_driver); /** - * scsi_netlink_init - Called by SCSI subsystem to intialize + * scsi_netlink_init - Called by SCSI subsystem to initialize * the SCSI transport netlink interface * **/ diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c index 8b955b5..4afa81a 100644 --- a/drivers/scsi/sym53c8xx_2/sym_glue.c +++ b/drivers/scsi/sym53c8xx_2/sym_glue.c @@ -1864,7 +1864,7 @@ static pci_ers_result_t sym2_io_slot_dump(struct pci_dev *pdev) * * This routine is similar to sym_set_workarounds(), except * that, at this point, we already know that the device was - * successfully intialized at least once before, and so most + * successfully initialized at least once before, and so most * of the steps taken there are un-needed here. */ static void sym2_reset_workarounds(struct pci_dev *pdev) |