diff options
Diffstat (limited to 'drivers')
87 files changed, 143 insertions, 144 deletions
diff --git a/drivers/acpi/acpica/utresrc.c b/drivers/acpi/acpica/utresrc.c index 84e0518..6ffd3a8 100644 --- a/drivers/acpi/acpica/utresrc.c +++ b/drivers/acpi/acpica/utresrc.c @@ -50,7 +50,7 @@ ACPI_MODULE_NAME("utresrc") #if defined(ACPI_DISASSEMBLER) || defined (ACPI_DEBUGGER) /* * Strings used to decode resource descriptors. - * Used by both the disasssembler and the debugger resource dump routines + * Used by both the disassembler and the debugger resource dump routines */ const char *acpi_gbl_bm_decode[] = { "NotBusMaster", diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index ec574fc..db39e9e 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -1521,7 +1521,7 @@ static void acpi_video_device_notify(acpi_handle handle, u32 event, void *data) acpi_bus_generate_proc_event(device, event, 0); keycode = KEY_BRIGHTNESSDOWN; break; - case ACPI_VIDEO_NOTIFY_ZERO_BRIGHTNESS: /* zero brightnesss */ + case ACPI_VIDEO_NOTIFY_ZERO_BRIGHTNESS: /* zero brightness */ if (brightness_switch_enabled) acpi_video_switch_brightness(video_device, event); acpi_bus_generate_proc_event(device, event, 0); diff --git a/drivers/base/memory.c b/drivers/base/memory.c index 0a134a4..9f9b235 100644 --- a/drivers/base/memory.c +++ b/drivers/base/memory.c @@ -389,15 +389,14 @@ memory_probe_store(struct class *class, struct class_attribute *attr, ret = add_memory(nid, phys_addr, PAGES_PER_SECTION << PAGE_SHIFT); if (ret) - break; + goto out; phys_addr += MIN_MEMORY_BLOCK_SIZE; } - if (ret) - count = ret; - - return count; + ret = count; +out: + return ret; } static CLASS_ATTR(probe, S_IWUSR, NULL, memory_probe_store); diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c index e0888cb..b4f5c32 100644 --- a/drivers/dma/dmatest.c +++ b/drivers/dma/dmatest.c @@ -56,8 +56,8 @@ MODULE_PARM_DESC(pq_sources, static int timeout = 3000; module_param(timeout, uint, S_IRUGO); -MODULE_PARM_DESC(timeout, "Transfer Timeout in msec (default: 3000), \ - Pass -1 for infinite timeout"); +MODULE_PARM_DESC(timeout, "Transfer Timeout in msec (default: 3000), " + "Pass -1 for infinite timeout"); /* * Initialization patterns. All bytes in the source buffer has bit 7 @@ -634,5 +634,5 @@ static void __exit dmatest_exit(void) } module_exit(dmatest_exit); -MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>"); +MODULE_AUTHOR("Haavard Skinnemoen (Atmel)"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/dma/dw_dmac.c b/drivers/dma/dw_dmac.c index 9c25c7d..2a2e2fa 100644 --- a/drivers/dma/dw_dmac.c +++ b/drivers/dma/dw_dmac.c @@ -1486,4 +1486,4 @@ module_exit(dw_exit); MODULE_LICENSE("GPL v2"); MODULE_DESCRIPTION("Synopsys DesignWare DMA Controller driver"); -MODULE_AUTHOR("Haavard Skinnemoen <haavard.skinnemoen@atmel.com>"); +MODULE_AUTHOR("Haavard Skinnemoen (Atmel)"); diff --git a/drivers/firmware/efivars.c b/drivers/firmware/efivars.c index a2d2f1f..5f29aaf 100644 --- a/drivers/firmware/efivars.c +++ b/drivers/firmware/efivars.c @@ -321,7 +321,7 @@ efivar_show_raw(struct efivar_entry *entry, char *buf) /* * Generic read/write functions that call the specific functions of - * the atttributes... + * the attributes... */ static ssize_t efivar_attr_show(struct kobject *kobj, struct attribute *attr, char *buf) diff --git a/drivers/firmware/iscsi_ibft.c b/drivers/firmware/iscsi_ibft.c index 6148a1c..ce33f46 100644 --- a/drivers/firmware/iscsi_ibft.c +++ b/drivers/firmware/iscsi_ibft.c @@ -87,8 +87,8 @@ #define IBFT_ISCSI_VERSION "0.5.0" #define IBFT_ISCSI_DATE "2010-Feb-25" -MODULE_AUTHOR("Peter Jones <pjones@redhat.com> and \ -Konrad Rzeszutek <ketuzsezr@darnok.org>"); +MODULE_AUTHOR("Peter Jones <pjones@redhat.com> and " + "Konrad Rzeszutek <ketuzsezr@darnok.org>"); MODULE_DESCRIPTION("sysfs interface to BIOS iBFT information"); MODULE_LICENSE("GPL"); MODULE_VERSION(IBFT_ISCSI_VERSION); diff --git a/drivers/gpio/ab8500-gpio.c b/drivers/gpio/ab8500-gpio.c index e7b834d..970053c 100644 --- a/drivers/gpio/ab8500-gpio.c +++ b/drivers/gpio/ab8500-gpio.c @@ -482,8 +482,8 @@ static int __devexit ab8500_gpio_remove(struct platform_device *pdev) ret = gpiochip_remove(&ab8500_gpio->chip); if (ret < 0) { - dev_err(ab8500_gpio->dev, "unable to remove gpiochip:\ - %d\n", ret); + dev_err(ab8500_gpio->dev, "unable to remove gpiochip: %d\n", + ret); return ret; } @@ -516,7 +516,6 @@ static void __exit ab8500_gpio_exit(void) module_exit(ab8500_gpio_exit); MODULE_AUTHOR("BIBEK BASU <bibek.basu@stericsson.com>"); -MODULE_DESCRIPTION("Driver allows to use AB8500 unused pins\ - to be used as GPIO"); +MODULE_DESCRIPTION("Driver allows to use AB8500 unused pins to be used as GPIO"); MODULE_ALIAS("AB8500 GPIO driver"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpio/langwell_gpio.c b/drivers/gpio/langwell_gpio.c index 560ab64..1b06f67 100644 --- a/drivers/gpio/langwell_gpio.c +++ b/drivers/gpio/langwell_gpio.c @@ -122,7 +122,7 @@ static int lnw_gpio_direction_output(struct gpio_chip *chip, lnw_gpio_set(chip, offset, value); spin_lock_irqsave(&lnw->lock, flags); value = readl(gpdr); - value |= BIT(offset % 32);; + value |= BIT(offset % 32); writel(value, gpdr); spin_unlock_irqrestore(&lnw->lock, flags); return 0; diff --git a/drivers/gpu/drm/radeon/radeon_fence.c b/drivers/gpu/drm/radeon/radeon_fence.c index bbcd1dd..1f82294 100644 --- a/drivers/gpu/drm/radeon/radeon_fence.c +++ b/drivers/gpu/drm/radeon/radeon_fence.c @@ -322,7 +322,7 @@ void radeon_fence_unref(struct radeon_fence **fence) *fence = NULL; if (tmp) { - kref_put(&tmp->kref, &radeon_fence_destroy); + kref_put(&tmp->kref, radeon_fence_destroy); } } diff --git a/drivers/gpu/drm/radeon/radeon_ring.c b/drivers/gpu/drm/radeon/radeon_ring.c index c6776e4..08c0233 100644 --- a/drivers/gpu/drm/radeon/radeon_ring.c +++ b/drivers/gpu/drm/radeon/radeon_ring.c @@ -194,7 +194,7 @@ int radeon_ib_pool_init(struct radeon_device *rdev) r = radeon_bo_kmap(rdev->ib_pool.robj, &ptr); radeon_bo_unreserve(rdev->ib_pool.robj); if (r) { - DRM_ERROR("radeon: failed to map ib poll (%d).\n", r); + DRM_ERROR("radeon: failed to map ib pool (%d).\n", r); return r; } for (i = 0; i < RADEON_IB_POOL_SIZE; i++) { diff --git a/drivers/gpu/drm/ttm/ttm_object.c b/drivers/gpu/drm/ttm/ttm_object.c index 75e9d6f..ebddd44 100644 --- a/drivers/gpu/drm/ttm/ttm_object.c +++ b/drivers/gpu/drm/ttm/ttm_object.c @@ -206,7 +206,7 @@ void ttm_base_object_unref(struct ttm_base_object **p_base) */ write_lock(&tdev->object_lock); - (void)kref_put(&base->refcount, &ttm_release_base); + kref_put(&base->refcount, ttm_release_base); write_unlock(&tdev->object_lock); } EXPORT_SYMBOL(ttm_base_object_unref); diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c index d9aa9a6..a651779 100644 --- a/drivers/i2c/busses/i2c-gpio.c +++ b/drivers/i2c/busses/i2c-gpio.c @@ -219,7 +219,7 @@ static void __exit i2c_gpio_exit(void) } module_exit(i2c_gpio_exit); -MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>"); +MODULE_AUTHOR("Haavard Skinnemoen (Atmel)"); MODULE_DESCRIPTION("Platform-independent bitbanging I2C driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:i2c-gpio"); diff --git a/drivers/leds/leds-mc13783.c b/drivers/leds/leds-mc13783.c index 06a5bb4..126ca79 100644 --- a/drivers/leds/leds-mc13783.c +++ b/drivers/leds/leds-mc13783.c @@ -235,7 +235,7 @@ static int __devinit mc13783_leds_prepare(struct platform_device *pdev) MC13783_LED_Cx_PERIOD; if (pdata->flags & MC13783_LED_TRIODE_TC3) - reg |= MC13783_LED_Cx_TRIODE_TC_BIT;; + reg |= MC13783_LED_Cx_TRIODE_TC_BIT; ret = mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_5, reg); if (ret) diff --git a/drivers/macintosh/therm_pm72.c b/drivers/macintosh/therm_pm72.c index bb8b722..0ff92c2 100644 --- a/drivers/macintosh/therm_pm72.c +++ b/drivers/macintosh/therm_pm72.c @@ -44,11 +44,11 @@ * TODO: - Check MPU structure version/signature * - Add things like /sbin/overtemp for non-critical * overtemp conditions so userland can take some policy - * decisions, like slewing down CPUs + * decisions, like slowing down CPUs * - Deal with fan and i2c failures in a better way * - Maybe do a generic PID based on params used for * U3 and Drives ? Definitely need to factor code a bit - * bettter... also make sensor detection more robust using + * better... also make sensor detection more robust using * the device-tree to probe for them * - Figure out how to get the slots consumption and set the * slots fan accordingly diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 34dd545..346e69b 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -3958,7 +3958,7 @@ static int make_request(mddev_t *mddev, struct bio * bi) /* spinlock is needed as reshape_progress may be * 64bit on a 32bit platform, and so it might be * possible to see a half-updated value - * Ofcourse reshape_progress could change after + * Of course reshape_progress could change after * the lock is dropped, so once we get a reference * to the stripe that we think it is, we will have * to check again. diff --git a/drivers/media/dvb/dvb-usb/dw2102.c b/drivers/media/dvb/dvb-usb/dw2102.c index f5b9da1..d312323 100644 --- a/drivers/media/dvb/dvb-usb/dw2102.c +++ b/drivers/media/dvb/dvb-usb/dw2102.c @@ -1377,7 +1377,7 @@ static struct rc_map_table rc_map_su3000_table[] = { { 0x0f, KEY_BLUE }, /* bottom yellow button */ { 0x14, KEY_AUDIO }, /* Snapshot */ { 0x38, KEY_TV }, /* TV/Radio */ - { 0x0c, KEY_ESC } /* upper Red buttton */ + { 0x0c, KEY_ESC } /* upper Red button */ }; static struct rc_map_dvb_usb_table_table keys_tables[] = { diff --git a/drivers/media/video/msp3400-driver.c b/drivers/media/video/msp3400-driver.c index 8126622..de5d481 100644 --- a/drivers/media/video/msp3400-driver.c +++ b/drivers/media/video/msp3400-driver.c @@ -96,7 +96,7 @@ MODULE_PARM_DESC(debug, "Enable debug messages [0-3]"); MODULE_PARM_DESC(stereo_threshold, "Sets signal threshold to activate stereo"); MODULE_PARM_DESC(standard, "Specify audio standard: 32 = NTSC, 64 = radio, Default: Autodetect"); MODULE_PARM_DESC(amsound, "Hardwire AM sound at 6.5Hz (France), FM can autoscan"); -MODULE_PARM_DESC(dolby, "Activates Dolby processsing"); +MODULE_PARM_DESC(dolby, "Activates Dolby processing"); /* ---------------------------------------------------------------------- */ diff --git a/drivers/media/video/saa7164/saa7164-encoder.c b/drivers/media/video/saa7164/saa7164-encoder.c index f9d5946..4003645 100644 --- a/drivers/media/video/saa7164/saa7164-encoder.c +++ b/drivers/media/video/saa7164/saa7164-encoder.c @@ -177,7 +177,7 @@ static int saa7164_encoder_buffers_alloc(struct saa7164_port *port) } } - /* Allocate some kenrel kernel buffers for copying + /* Allocate some kernel buffers for copying * to userpsace. */ len = params->numberoflines * params->pitch; diff --git a/drivers/media/video/saa7164/saa7164-vbi.c b/drivers/media/video/saa7164/saa7164-vbi.c index 9e5b01c..bc1fced 100644 --- a/drivers/media/video/saa7164/saa7164-vbi.c +++ b/drivers/media/video/saa7164/saa7164-vbi.c @@ -148,7 +148,7 @@ static int saa7164_vbi_buffers_alloc(struct saa7164_port *port) } } - /* Allocate some kenrel kernel buffers for copying + /* Allocate some kernel buffers for copying * to userpsace. */ len = params->numberoflines * params->pitch; diff --git a/drivers/media/video/usbvision/usbvision-video.c b/drivers/media/video/usbvision/usbvision-video.c index 6083137..9855fbe 100644 --- a/drivers/media/video/usbvision/usbvision-video.c +++ b/drivers/media/video/usbvision/usbvision-video.c @@ -70,8 +70,9 @@ #include "usbvision.h" #include "usbvision-cards.h" -#define DRIVER_AUTHOR "Joerg Heckenbach <joerg@heckenbach-aw.de>, \ -Dwaine Garden <DwaineGarden@rogers.com>" +#define DRIVER_AUTHOR \ + "Joerg Heckenbach <joerg@heckenbach-aw.de>, " \ + "Dwaine Garden <DwaineGarden@rogers.com>" #define DRIVER_NAME "usbvision" #define DRIVER_ALIAS "USBVision" #define DRIVER_DESC "USBVision USB Video Device Driver for Linux" diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c index fa15e85..7956a10 100644 --- a/drivers/message/fusion/mptbase.c +++ b/drivers/message/fusion/mptbase.c @@ -83,19 +83,18 @@ MODULE_VERSION(my_VERSION); static int mpt_msi_enable_spi; module_param(mpt_msi_enable_spi, int, 0); -MODULE_PARM_DESC(mpt_msi_enable_spi, " Enable MSI Support for SPI \ - controllers (default=0)"); +MODULE_PARM_DESC(mpt_msi_enable_spi, + " Enable MSI Support for SPI controllers (default=0)"); static int mpt_msi_enable_fc; module_param(mpt_msi_enable_fc, int, 0); -MODULE_PARM_DESC(mpt_msi_enable_fc, " Enable MSI Support for FC \ - controllers (default=0)"); +MODULE_PARM_DESC(mpt_msi_enable_fc, + " Enable MSI Support for FC controllers (default=0)"); static int mpt_msi_enable_sas; module_param(mpt_msi_enable_sas, int, 0); -MODULE_PARM_DESC(mpt_msi_enable_sas, " Enable MSI Support for SAS \ - controllers (default=0)"); - +MODULE_PARM_DESC(mpt_msi_enable_sas, + " Enable MSI Support for SAS controllers (default=0)"); static int mpt_channel_mapping; module_param(mpt_channel_mapping, int, 0); @@ -105,15 +104,14 @@ static int mpt_debug_level; static int mpt_set_debug_level(const char *val, struct kernel_param *kp); module_param_call(mpt_debug_level, mpt_set_debug_level, param_get_int, &mpt_debug_level, 0600); -MODULE_PARM_DESC(mpt_debug_level, " debug level - refer to mptdebug.h \ - - (default=0)"); +MODULE_PARM_DESC(mpt_debug_level, + " debug level - refer to mptdebug.h - (default=0)"); int mpt_fwfault_debug; EXPORT_SYMBOL(mpt_fwfault_debug); module_param(mpt_fwfault_debug, int, 0600); -MODULE_PARM_DESC(mpt_fwfault_debug, "Enable detection of Firmware fault" - " and halt Firmware on fault - (default=0)"); - +MODULE_PARM_DESC(mpt_fwfault_debug, + "Enable detection of Firmware fault and halt Firmware on fault - (default=0)"); static char MptCallbacksName[MPT_MAX_PROTOCOL_DRIVERS][50]; diff --git a/drivers/message/i2o/README.ioctl b/drivers/message/i2o/README.ioctl index 65c0c47..5fb195af4 100644 --- a/drivers/message/i2o/README.ioctl +++ b/drivers/message/i2o/README.ioctl @@ -110,7 +110,7 @@ V. Getting Logical Configuration Table ENOBUFS Buffer not large enough. If this occurs, the required buffer length is written into *(lct->reslen) -VI. Settting Parameters +VI. Setting Parameters SYNOPSIS diff --git a/drivers/misc/bh1780gli.c b/drivers/misc/bh1780gli.c index d07cd67..82fe2d0 100644 --- a/drivers/misc/bh1780gli.c +++ b/drivers/misc/bh1780gli.c @@ -49,8 +49,8 @@ static int bh1780_write(struct bh1780_data *ddata, u8 reg, u8 val, char *msg) int ret = i2c_smbus_write_byte_data(ddata->client, reg, val); if (ret < 0) dev_err(&ddata->client->dev, - "i2c_smbus_write_byte_data failed error %d\ - Register (%s)\n", ret, msg); + "i2c_smbus_write_byte_data failed error %d Register (%s)\n", + ret, msg); return ret; } @@ -59,8 +59,8 @@ static int bh1780_read(struct bh1780_data *ddata, u8 reg, char *msg) int ret = i2c_smbus_read_byte_data(ddata->client, reg); if (ret < 0) dev_err(&ddata->client->dev, - "i2c_smbus_read_byte_data failed error %d\ - Register (%s)\n", ret, msg); + "i2c_smbus_read_byte_data failed error %d Register (%s)\n", + ret, msg); return ret; } diff --git a/drivers/misc/cs5535-mfgpt.c b/drivers/misc/cs5535-mfgpt.c index d02d302..e01e08c 100644 --- a/drivers/misc/cs5535-mfgpt.c +++ b/drivers/misc/cs5535-mfgpt.c @@ -329,7 +329,7 @@ done: return err; } -static struct platform_driver cs5535_mfgpt_drv = { +static struct platform_driver cs5535_mfgpt_driver = { .driver = { .name = DRV_NAME, .owner = THIS_MODULE, @@ -340,7 +340,7 @@ static struct platform_driver cs5535_mfgpt_drv = { static int __init cs5535_mfgpt_init(void) { - return platform_driver_register(&cs5535_mfgpt_drv); + return platform_driver_register(&cs5535_mfgpt_driver); } module_init(cs5535_mfgpt_init); diff --git a/drivers/misc/ibmasm/ibmasmfs.c b/drivers/misc/ibmasm/ibmasmfs.c index d2d5d23..8994772 100644 --- a/drivers/misc/ibmasm/ibmasmfs.c +++ b/drivers/misc/ibmasm/ibmasmfs.c @@ -29,7 +29,7 @@ /* * The IBMASM file virtual filesystem. It creates the following hierarchy - * dymamically when mounted from user space: + * dynamically when mounted from user space: * * /ibmasm * |-- 0 diff --git a/drivers/misc/spear13xx_pcie_gadget.c b/drivers/misc/spear13xx_pcie_gadget.c index ec3b8c9..7aded90 100644 --- a/drivers/misc/spear13xx_pcie_gadget.c +++ b/drivers/misc/spear13xx_pcie_gadget.c @@ -787,8 +787,8 @@ static int __devinit spear_pcie_gadget_probe(struct platform_device *pdev) status = request_irq(irq, spear_pcie_gadget_irq, 0, pdev->name, NULL); if (status) { - dev_err(&pdev->dev, "pcie gadget interrupt IRQ%d already \ - claimed\n", irq); + dev_err(&pdev->dev, + "pcie gadget interrupt IRQ%d already claimed\n", irq); goto err_iounmap; } diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index ea3888b..aa8039f 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -1899,5 +1899,5 @@ late_initcall(atmci_init); /* try to load after dma driver when built-in */ module_exit(atmci_exit); MODULE_DESCRIPTION("Atmel Multimedia Card Interface driver"); -MODULE_AUTHOR("Haavard Skinnemoen <haavard.skinnemoen@atmel.com>"); +MODULE_AUTHOR("Haavard Skinnemoen (Atmel)"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c index c5298d1..cd5789f 100644 --- a/drivers/net/atlx/atl1.c +++ b/drivers/net/atlx/atl1.c @@ -83,8 +83,9 @@ #include "atl1.h" #define ATLX_DRIVER_VERSION "2.1.3" -MODULE_AUTHOR("Xiong Huang <xiong.huang@atheros.com>, \ -Chris Snook <csnook@redhat.com>, Jay Cliburn <jcliburn@gmail.com>"); +MODULE_AUTHOR("Xiong Huang <xiong.huang@atheros.com>, " + "Chris Snook <csnook@redhat.com>, " + "Jay Cliburn <jcliburn@gmail.com>"); MODULE_LICENSE("GPL"); MODULE_VERSION(ATLX_DRIVER_VERSION); diff --git a/drivers/net/can/pch_can.c b/drivers/net/can/pch_can.c index e54712b..d11fbb2 100644 --- a/drivers/net/can/pch_can.c +++ b/drivers/net/can/pch_can.c @@ -653,7 +653,7 @@ static int pch_can_rx_normal(struct net_device *ndev, u32 obj_num, int quota) u16 data_reg; do { - /* Reading the messsage object from the Message RAM */ + /* Reading the message object from the Message RAM */ iowrite32(PCH_CMASK_RX_TX_GET, &priv->regs->ifregs[0].cmask); pch_can_rw_msg_obj(&priv->regs->ifregs[0].creq, obj_num); diff --git a/drivers/net/can/softing/softing_main.c b/drivers/net/can/softing/softing_main.c index 7a70709..60a49e5 100644 --- a/drivers/net/can/softing/softing_main.c +++ b/drivers/net/can/softing/softing_main.c @@ -797,7 +797,7 @@ static __devinit int softing_pdev_probe(struct platform_device *pdev) ret = -EINVAL; pres = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!pres) - goto platform_resource_failed;; + goto platform_resource_failed; card->dpram_phys = pres->start; card->dpram_size = pres->end - pres->start + 1; card->dpram = ioremap_nocache(card->dpram_phys, card->dpram_size); diff --git a/drivers/net/irda/ali-ircc.c b/drivers/net/irda/ali-ircc.c index 872183f..d532dde 100644 --- a/drivers/net/irda/ali-ircc.c +++ b/drivers/net/irda/ali-ircc.c @@ -1800,7 +1800,7 @@ static int ali_ircc_dma_receive_complete(struct ali_ircc_cb *self) MessageCount = inb(iobase+ FIR_LSR)&0x07; if (MessageCount > 0) - IRDA_DEBUG(0, "%s(), Messsage count = %d,\n", __func__ , MessageCount); + IRDA_DEBUG(0, "%s(), Message count = %d,\n", __func__ , MessageCount); for (i=0; i<=MessageCount; i++) { diff --git a/drivers/net/macb.c b/drivers/net/macb.c index 629bd26..6c6a028 100644 --- a/drivers/net/macb.c +++ b/drivers/net/macb.c @@ -1356,5 +1356,5 @@ module_exit(macb_exit); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Atmel MACB Ethernet driver"); -MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>"); +MODULE_AUTHOR("Haavard Skinnemoen (Atmel)"); MODULE_ALIAS("platform:macb"); diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index a9a5f5e..df0d2c8 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -7163,7 +7163,7 @@ static void do_s2io_card_down(struct s2io_nic *sp, int do_io) /* As per the HW requirement we need to replenish the * receive buffer to avoid the ring bump. Since there is * no intention of processing the Rx frame at this pointwe are - * just settting the ownership bit of rxd in Each Rx + * just setting the ownership bit of rxd in Each Rx * ring to HW and set the appropriate buffer size * based on the ring mode */ diff --git a/drivers/net/sgiseeq.c b/drivers/net/sgiseeq.c index dd03bf6..54415c7 100644 --- a/drivers/net/sgiseeq.c +++ b/drivers/net/sgiseeq.c @@ -1,7 +1,7 @@ /* * sgiseeq.c: Seeq8003 ethernet driver for SGI machines. * - * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com) + * Copyright (C) 1996 David S. Miller (davem@davemloft.net) */ #undef DEBUG diff --git a/drivers/net/sgiseeq.h b/drivers/net/sgiseeq.h index 523104d..2211e29 100644 --- a/drivers/net/sgiseeq.h +++ b/drivers/net/sgiseeq.h @@ -1,7 +1,7 @@ /* * sgiseeq.h: Defines for the Seeq8003 ethernet controller. * - * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com) + * Copyright (C) 1996 David S. Miller (davem@davemloft.net) */ #ifndef _SGISEEQ_H #define _SGISEEQ_H diff --git a/drivers/net/ucc_geth_ethtool.c b/drivers/net/ucc_geth_ethtool.c index 537fbc0..a97257f 100644 --- a/drivers/net/ucc_geth_ethtool.c +++ b/drivers/net/ucc_geth_ethtool.c @@ -6,7 +6,7 @@ * Author: Li Yang <leoli@freescale.com> * * Limitation: - * Can only get/set setttings of the first queue. + * Can only get/set settings of the first queue. * Need to re-open the interface manually after changing some parameters. * * This program is free software; you can redistribute it and/or modify it diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index e6dd244..ce395fe 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -109,7 +109,7 @@ int usbnet_get_endpoints(struct usbnet *dev, struct usb_interface *intf) /* take the first altsetting with in-bulk + out-bulk; * remember any status endpoint, just in case; - * ignore other endpoints and altsetttings. + * ignore other endpoints and altsettings. */ for (ep = 0; ep < alt->desc.bNumEndpoints; ep++) { struct usb_host_endpoint *e; diff --git a/drivers/net/wan/pc300_drv.c b/drivers/net/wan/pc300_drv.c index f875cfa..737b59f 100644 --- a/drivers/net/wan/pc300_drv.c +++ b/drivers/net/wan/pc300_drv.c @@ -1445,7 +1445,7 @@ static void falc_update_stats(pc300_t * card, int ch) * Description: In the remote loopback mode the clock and data recovered * from the line inputs RL1/2 or RDIP/RDIN are routed back * to the line outputs XL1/2 or XDOP/XDON via the analog - * transmitter. As in normal mode they are processsed by + * transmitter. As in normal mode they are processed by * the synchronizer and then sent to the system interface. *---------------------------------------------------------------------------- */ diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c index 4e5c7a1..a70c512 100644 --- a/drivers/net/wireless/airo.c +++ b/drivers/net/wireless/airo.c @@ -242,9 +242,8 @@ static int airo_perm = 0555; static int proc_perm = 0644; MODULE_AUTHOR("Benjamin Reed"); -MODULE_DESCRIPTION("Support for Cisco/Aironet 802.11 wireless ethernet \ -cards. Direct support for ISA/PCI/MPI cards and support \ -for PCMCIA when used with airo_cs."); +MODULE_DESCRIPTION("Support for Cisco/Aironet 802.11 wireless ethernet cards. " + "Direct support for ISA/PCI/MPI cards and support for PCMCIA when used with airo_cs."); MODULE_LICENSE("Dual BSD/GPL"); MODULE_SUPPORTED_DEVICE("Aironet 4500, 4800 and Cisco 340/350"); module_param_array(io, int, NULL, 0); @@ -252,18 +251,20 @@ module_param_array(irq, int, NULL, 0); module_param_array(rates, int, NULL, 0); module_param_array(ssids, charp, NULL, 0); module_param(auto_wep, int, 0); -MODULE_PARM_DESC(auto_wep, "If non-zero, the driver will keep looping through \ -the authentication options until an association is made. The value of \ -auto_wep is number of the wep keys to check. A value of 2 will try using \ -the key at index 0 and index 1."); +MODULE_PARM_DESC(auto_wep, + "If non-zero, the driver will keep looping through the authentication options until an association is made. " + "The value of auto_wep is number of the wep keys to check. " + "A value of 2 will try using the key at index 0 and index 1."); module_param(aux_bap, int, 0); -MODULE_PARM_DESC(aux_bap, "If non-zero, the driver will switch into a mode \ -than seems to work better for older cards with some older buses. Before \ -switching it checks that the switch is needed."); +MODULE_PARM_DESC(aux_bap, + "If non-zero, the driver will switch into a mode that seems to work better for older cards with some older buses. " + "Before switching it checks that the switch is needed."); module_param(maxencrypt, int, 0); -MODULE_PARM_DESC(maxencrypt, "The maximum speed that the card can do \ -encryption. Units are in 512kbs. Zero (default) means there is no limit. \ -Older cards used to be limited to 2mbs (4)."); +MODULE_PARM_DESC(maxencrypt, + "The maximum speed that the card can do encryption. " + "Units are in 512kbs. " + "Zero (default) means there is no limit. " + "Older cards used to be limited to 2mbs (4)."); module_param(adhoc, int, 0); MODULE_PARM_DESC(adhoc, "If non-zero, the card will start in adhoc mode."); module_param(probe, int, 0); diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c index 1e22035..d985841 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c @@ -3327,26 +3327,26 @@ static int ar9300_eeprom_restore_internal(struct ath_hw *ah, else cptr = AR9300_BASE_ADDR; ath_dbg(common, ATH_DBG_EEPROM, - "Trying EEPROM accesss at Address 0x%04x\n", cptr); + "Trying EEPROM access at Address 0x%04x\n", cptr); if (ar9300_check_eeprom_header(ah, read, cptr)) goto found; cptr = AR9300_BASE_ADDR_512; ath_dbg(common, ATH_DBG_EEPROM, - "Trying EEPROM accesss at Address 0x%04x\n", cptr); + "Trying EEPROM access at Address 0x%04x\n", cptr); if (ar9300_check_eeprom_header(ah, read, cptr)) goto found; read = ar9300_read_otp; cptr = AR9300_BASE_ADDR; ath_dbg(common, ATH_DBG_EEPROM, - "Trying OTP accesss at Address 0x%04x\n", cptr); + "Trying OTP access at Address 0x%04x\n", cptr); if (ar9300_check_eeprom_header(ah, read, cptr)) goto found; cptr = AR9300_BASE_ADDR_512; ath_dbg(common, ATH_DBG_EEPROM, - "Trying OTP accesss at Address 0x%04x\n", cptr); + "Trying OTP access at Address 0x%04x\n", cptr); if (ar9300_check_eeprom_header(ah, read, cptr)) goto found; diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h index 229f438..ebc93c1 100644 --- a/drivers/net/wireless/b43/b43.h +++ b/drivers/net/wireless/b43/b43.h @@ -648,8 +648,8 @@ struct b43_request_fw_context { char errors[B43_NR_FWTYPES][128]; /* Temporary buffer for storing the firmware name. */ char fwname[64]; - /* A fatal error occurred while requesting. Firmware reqest - * can not continue, as any other reqest will also fail. */ + /* A fatal error occurred while requesting. Firmware request + * can not continue, as any other request will also fail. */ int fatal_failure; }; diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c index 42c3fe3..87813c3 100644 --- a/drivers/net/wireless/ipw2x00/ipw2200.c +++ b/drivers/net/wireless/ipw2x00/ipw2200.c @@ -7430,7 +7430,7 @@ static int ipw_associate_network(struct ipw_priv *priv, priv->assoc_request.capability &= ~cpu_to_le16(WLAN_CAPABILITY_SHORT_SLOT_TIME); - IPW_DEBUG_ASSOC("%sssocation attempt: '%s', channel %d, " + IPW_DEBUG_ASSOC("%ssociation attempt: '%s', channel %d, " "802.11%c [%d], %s[:%s], enc=%s%s%s%c%c\n", roaming ? "Rea" : "A", print_ssid(ssid, priv->essid, priv->essid_len), diff --git a/drivers/net/wireless/iwlegacy/iwl-4965-calib.c b/drivers/net/wireless/iwlegacy/iwl-4965-calib.c index 81d6a25..162d877 100644 --- a/drivers/net/wireless/iwlegacy/iwl-4965-calib.c +++ b/drivers/net/wireless/iwlegacy/iwl-4965-calib.c @@ -713,8 +713,8 @@ iwl4965_find_disconn_antenna(struct iwl_priv *priv, u32* average_sig, iwl4965_find_first_chain(priv->cfg->valid_tx_ant); data->disconn_array[first_chain] = 0; active_chains |= BIT(first_chain); - IWL_DEBUG_CALIB(priv, "All Tx chains are disconnected \ - W/A - declare %d as connected\n", + IWL_DEBUG_CALIB(priv, + "All Tx chains are disconnected W/A - declare %d as connected\n", first_chain); break; } diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-calib.c b/drivers/net/wireless/iwlwifi/iwl-agn-calib.c index 0f6bb9b..39d1e47 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-calib.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-calib.c @@ -817,8 +817,8 @@ static void iwl_find_disconn_antenna(struct iwl_priv *priv, u32* average_sig, find_first_chain(priv->cfg->valid_tx_ant); data->disconn_array[first_chain] = 0; active_chains |= BIT(first_chain); - IWL_DEBUG_CALIB(priv, "All Tx chains are disconnected \ - W/A - declare %d as connected\n", + IWL_DEBUG_CALIB(priv, + "All Tx chains are disconnected W/A - declare %d as connected\n", first_chain); break; } diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 3ecc319..08e3cae 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -1766,7 +1766,7 @@ static const char *desc_lookup(u32 num) max = ARRAY_SIZE(advanced_lookup) - 1; for (i = 0; i < max; i++) { if (advanced_lookup[i].num == num) - break;; + break; } return advanced_lookup[i].name; } diff --git a/drivers/net/wireless/rtlwifi/core.c b/drivers/net/wireless/rtlwifi/core.c index fc89cd8..d2ec253 100644 --- a/drivers/net/wireless/rtlwifi/core.c +++ b/drivers/net/wireless/rtlwifi/core.c @@ -783,7 +783,7 @@ static void rtl_op_set_tsf(struct ieee80211_hw *hw, u64 tsf) { struct rtl_priv *rtlpriv = rtl_priv(hw); struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); - u8 bibss = (mac->opmode == NL80211_IFTYPE_ADHOC) ? 1 : 0;; + u8 bibss = (mac->opmode == NL80211_IFTYPE_ADHOC) ? 1 : 0; mac->tsf = tsf; rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_CORRECT_TSF, (u8 *) (&bibss)); diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c b/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c index 4a56138..defb437 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c @@ -697,7 +697,7 @@ static bool _rtl92ce_init_mac(struct ieee80211_hw *hw) rtl_write_word(rtlpriv, REG_CR, 0x2ff); if (_rtl92ce_llt_table_init(hw) == false) - return false;; + return false; rtl_write_dword(rtlpriv, REG_HISR, 0xffffffff); rtl_write_byte(rtlpriv, REG_HISRE, 0xff); @@ -754,7 +754,7 @@ static bool _rtl92ce_init_mac(struct ieee80211_hw *hw) rtl_write_dword(rtlpriv, REG_MCUTST_1, 0x0); - return true;; + return true; } static void _rtl92ce_hw_configure(struct ieee80211_hw *hw) diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 0485e39..485c09e 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -111,7 +111,7 @@ config DELL_WMI_AIO All-In-One machines. To compile this driver as a module, choose M here: the module will - be called dell-wmi. + be called dell-wmi-aio. config FUJITSU_LAPTOP diff --git a/drivers/power/intel_mid_battery.c b/drivers/power/intel_mid_battery.c index bce3a01..cffcb7c 100644 --- a/drivers/power/intel_mid_battery.c +++ b/drivers/power/intel_mid_battery.c @@ -522,7 +522,7 @@ static int pmic_battery_set_charger(struct pmic_power_module_info *pbi, if (retval) { dev_warn(pbi->dev, "%s(): ipc pmic read failed\n", __func__); - return retval;; + return retval; } return 0; diff --git a/drivers/regulator/max8998.c b/drivers/regulator/max8998.c index 4341026..f57e9c4 100644 --- a/drivers/regulator/max8998.c +++ b/drivers/regulator/max8998.c @@ -405,8 +405,8 @@ static int max8998_set_voltage_buck(struct regulator_dev *rdev, switch (buck) { case MAX8998_BUCK1: dev_dbg(max8998->dev, - "BUCK1, i:%d, buck1_vol1:%d, buck1_vol2:%d\n\ - buck1_vol3:%d, buck1_vol4:%d\n", + "BUCK1, i:%d, buck1_vol1:%d, buck1_vol2:%d\n" + "buck1_vol3:%d, buck1_vol4:%d\n", i, max8998->buck1_vol[0], max8998->buck1_vol[1], max8998->buck1_vol[2], max8998->buck1_vol[3]); diff --git a/drivers/regulator/mc13783-regulator.c b/drivers/regulator/mc13783-regulator.c index 23249cb..b8a00c7 100644 --- a/drivers/regulator/mc13783-regulator.c +++ b/drivers/regulator/mc13783-regulator.c @@ -341,7 +341,7 @@ static int __devinit mc13783_regulator_probe(struct platform_device *pdev) struct mc13783_regulator_init_data *init_data; int i, ret; - dev_dbg(&pdev->dev, "mc13783_regulator_probe id %d\n", pdev->id); + dev_dbg(&pdev->dev, "%s id %d\n", __func__, pdev->id); priv = kzalloc(sizeof(*priv) + pdata->num_regulators * sizeof(priv->regulators[0]), diff --git a/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.c b/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.c index 078ed60..232aff1 100644 --- a/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.c +++ b/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.c @@ -1,5 +1,5 @@ /* - * Aic7xxx SCSI host adapter firmware asssembler symbol table implementation + * Aic7xxx SCSI host adapter firmware assembler symbol table implementation * * Copyright (c) 1997 Justin T. Gibbs. * Copyright (c) 2002 Adaptec Inc. diff --git a/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.h b/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.h index 2ba73ae..34bbcad 100644 --- a/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.h +++ b/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.h @@ -1,5 +1,5 @@ /* - * Aic7xxx SCSI host adapter firmware asssembler symbol table definitions + * Aic7xxx SCSI host adapter firmware assembler symbol table definitions * * Copyright (c) 1997 Justin T. Gibbs. * Copyright (c) 2002 Adaptec Inc. diff --git a/drivers/scsi/be2iscsi/be_main.c b/drivers/scsi/be2iscsi/be_main.c index cea9b27..94b9a07 100644 --- a/drivers/scsi/be2iscsi/be_main.c +++ b/drivers/scsi/be2iscsi/be_main.c @@ -619,7 +619,7 @@ static void beiscsi_get_params(struct beiscsi_hba *phba) + BE2_NOPOUT_REQ)); phba->params.cxns_per_ctrl = phba->fw_config.iscsi_cid_count; phba->params.asyncpdus_per_ctrl = phba->fw_config.iscsi_cid_count * 2; - phba->params.icds_per_ctrl = phba->fw_config.iscsi_icd_count;; + phba->params.icds_per_ctrl = phba->fw_config.iscsi_icd_count; phba->params.num_sge_per_io = BE2_SGE; phba->params.defpdu_hdr_sz = BE2_DEFPDU_HDR_SZ; phba->params.defpdu_data_sz = BE2_DEFPDU_DATA_SZ; @@ -782,7 +782,7 @@ static irqreturn_t be_isr(int irq, void *dev_id) int isr; phba = dev_id; - ctrl = &phba->ctrl;; + ctrl = &phba->ctrl; isr = ioread32(ctrl->csr + CEV_ISR0_OFFSET + (PCI_FUNC(ctrl->pdev->devfn) * CEV_ISR_SIZE)); if (!isr) diff --git a/drivers/scsi/constants.c b/drivers/scsi/constants.c index 60d2ef2..450e011 100644 --- a/drivers/scsi/constants.c +++ b/drivers/scsi/constants.c @@ -34,7 +34,7 @@ static const char * cdb_byte0_names[] = { /* 00-03 */ "Test Unit Ready", "Rezero Unit/Rewind", NULL, "Request Sense", /* 04-07 */ "Format Unit/Medium", "Read Block Limits", NULL, - "Reasssign Blocks", + "Reassign Blocks", /* 08-0d */ "Read(6)", NULL, "Write(6)", "Seek(6)", NULL, NULL, /* 0e-12 */ NULL, "Read Reverse", "Write Filemarks", "Space", "Inquiry", /* 13-16 */ "Verify(6)", "Recover Buffered Data", "Mode Select(6)", diff --git a/drivers/scsi/esp_scsi.c b/drivers/scsi/esp_scsi.c index 9a1af1d..394ed9e 100644 --- a/drivers/scsi/esp_scsi.c +++ b/drivers/scsi/esp_scsi.c @@ -1058,7 +1058,7 @@ static struct esp_cmd_entry *esp_reconnect_with_tag(struct esp *esp, esp->ops->send_dma_cmd(esp, esp->command_block_dma, 2, 2, 1, ESP_CMD_DMA | ESP_CMD_TI); - /* ACK the msssage. */ + /* ACK the message. */ scsi_esp_cmd(esp, ESP_CMD_MOK); for (i = 0; i < ESP_RESELECT_TAG_LIMIT; i++) { diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 17d7893..8dcbf8f 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -4532,7 +4532,7 @@ lpfc_set_vport_symbolic_name(struct fc_vport *fc_vport) * * This function is called by the lpfc_get_cfgparam() routine to set the * module lpfc_log_verbose into the @phba cfg_log_verbose for use with - * log messsage according to the module's lpfc_log_verbose parameter setting + * log message according to the module's lpfc_log_verbose parameter setting * before hba port or vport created. **/ static void diff --git a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c index 37e2a12..853e504 100644 --- a/drivers/scsi/lpfc/lpfc_bsg.c +++ b/drivers/scsi/lpfc/lpfc_bsg.c @@ -598,7 +598,7 @@ lpfc_bsg_rport_els(struct fc_bsg_job *job) dd_data->context_un.iocb.cmdiocbq = cmdiocbq; dd_data->context_un.iocb.rspiocbq = rspiocbq; dd_data->context_un.iocb.set_job = job; - dd_data->context_un.iocb.bmp = NULL;; + dd_data->context_un.iocb.bmp = NULL; dd_data->context_un.iocb.ndlp = ndlp; if (phba->cfg_poll & DISABLE_FCP_RING_INT) { diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h index 95f11ed..86b6f7e 100644 --- a/drivers/scsi/lpfc/lpfc_hw.h +++ b/drivers/scsi/lpfc/lpfc_hw.h @@ -1002,7 +1002,7 @@ typedef struct _ELS_PKT { /* Structure is in Big Endian format */ #define SLI_MGMT_GRPL 0x102 /* Get registered Port list */ #define SLI_MGMT_GPAT 0x110 /* Get Port attributes */ #define SLI_MGMT_RHBA 0x200 /* Register HBA */ -#define SLI_MGMT_RHAT 0x201 /* Register HBA atttributes */ +#define SLI_MGMT_RHAT 0x201 /* Register HBA attributes */ #define SLI_MGMT_RPRT 0x210 /* Register Port */ #define SLI_MGMT_RPA 0x211 /* Register Port attributes */ #define SLI_MGMT_DHBA 0x300 /* De-register HBA */ diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 837d272..fd5835e 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -3040,7 +3040,7 @@ lpfc_sli_sp_handle_rspiocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, list_add_tail(&rspiocbp->list, &(pring->iocb_continueq)); pring->iocb_continueq_cnt++; - /* Now, determine whetehr the list is completed for processing */ + /* Now, determine whether the list is completed for processing */ irsp = &rspiocbp->iocb; if (irsp->ulpLe) { /* diff --git a/drivers/scsi/nsp32_debug.c b/drivers/scsi/nsp32_debug.c index 2fb3fb5..58806f4 100644 --- a/drivers/scsi/nsp32_debug.c +++ b/drivers/scsi/nsp32_debug.c @@ -13,7 +13,7 @@ static const char unknown[] = "UNKNOWN"; static const char * group_0_commands[] = { /* 00-03 */ "Test Unit Ready", "Rezero Unit", unknown, "Request Sense", -/* 04-07 */ "Format Unit", "Read Block Limits", unknown, "Reasssign Blocks", +/* 04-07 */ "Format Unit", "Read Block Limits", unknown, "Reassign Blocks", /* 08-0d */ "Read (6)", unknown, "Write (6)", "Seek (6)", unknown, unknown, /* 0e-12 */ unknown, "Read Reverse", "Write Filemarks", "Space", "Inquiry", /* 13-16 */ unknown, "Recover Buffered Data", "Mode Select", "Reserve", diff --git a/drivers/scsi/pcmcia/nsp_debug.c b/drivers/scsi/pcmcia/nsp_debug.c index 3c6ef64..6aa7d26 100644 --- a/drivers/scsi/pcmcia/nsp_debug.c +++ b/drivers/scsi/pcmcia/nsp_debug.c @@ -15,7 +15,7 @@ static const char unknown[] = "UNKNOWN"; static const char * group_0_commands[] = { /* 00-03 */ "Test Unit Ready", "Rezero Unit", unknown, "Request Sense", -/* 04-07 */ "Format Unit", "Read Block Limits", unknown, "Reasssign Blocks", +/* 04-07 */ "Format Unit", "Read Block Limits", unknown, "Reassign Blocks", /* 08-0d */ "Read (6)", unknown, "Write (6)", "Seek (6)", unknown, unknown, /* 0e-12 */ unknown, "Read Reverse", "Write Filemarks", "Space", "Inquiry", /* 13-16 */ unknown, "Recover Buffered Data", "Mode Select", "Reserve", diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c index 002360d..172cefb 100644 --- a/drivers/scsi/pm8001/pm8001_init.c +++ b/drivers/scsi/pm8001/pm8001_init.c @@ -160,7 +160,7 @@ static void pm8001_free(struct pm8001_hba_info *pm8001_ha) static void pm8001_tasklet(unsigned long opaque) { struct pm8001_hba_info *pm8001_ha; - pm8001_ha = (struct pm8001_hba_info *)opaque;; + pm8001_ha = (struct pm8001_hba_info *)opaque; if (unlikely(!pm8001_ha)) BUG_ON(1); PM8001_CHIP_DISP->isr(pm8001_ha); diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 9c0f0e3..1b60a95 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -1060,7 +1060,7 @@ qla2x00_ct_entry(scsi_qla_host_t *vha, struct req_que *req, } DEBUG2(qla2x00_dump_buffer((uint8_t *)pkt, sizeof(*pkt))); } else { - bsg_job->reply->result = DID_OK << 16;; + bsg_job->reply->result = DID_OK << 16; bsg_job->reply->reply_payload_rcv_len = bsg_job->reply_payload.payload_len; bsg_job->reply_len = 0; @@ -1155,7 +1155,7 @@ qla24xx_els_ct_entry(scsi_qla_host_t *vha, struct req_que *req, DEBUG2(qla2x00_dump_buffer((uint8_t *)pkt, sizeof(*pkt))); } else { - bsg_job->reply->result = DID_OK << 16;; + bsg_job->reply->result = DID_OK << 16; bsg_job->reply->reply_payload_rcv_len = bsg_job->reply_payload.payload_len; bsg_job->reply_len = 0; } diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c index f9d81c8..d78b58d 100644 --- a/drivers/scsi/qla4xxx/ql4_mbx.c +++ b/drivers/scsi/qla4xxx/ql4_mbx.c @@ -19,7 +19,7 @@ * @mbx_cmd: data pointer for mailbox in registers. * @mbx_sts: data pointer for mailbox out registers. * - * This routine isssue mailbox commands and waits for completion. + * This routine issue mailbox commands and waits for completion. * If outCount is 0, this routine completes successfully WITHOUT waiting * for the mailbox command to complete. **/ diff --git a/drivers/scsi/sgiwd93.c b/drivers/scsi/sgiwd93.c index fef0e3c..3a9d85c 100644 --- a/drivers/scsi/sgiwd93.c +++ b/drivers/scsi/sgiwd93.c @@ -3,7 +3,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com) + * Copyright (C) 1996 David S. Miller (davem@davemloft.net) * Copyright (C) 1999 Andrew R. Baker (andrewb@uab.edu) * Copyright (C) 2001 Florian Lohoff (flo@rfc822.org) * Copyright (C) 2003, 07 Ralf Baechle (ralf@linux-mips.org) diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c index 1a478bf..08711e9 100644 --- a/drivers/spi/atmel_spi.c +++ b/drivers/spi/atmel_spi.c @@ -935,6 +935,6 @@ static void __exit atmel_spi_exit(void) module_exit(atmel_spi_exit); MODULE_DESCRIPTION("Atmel AT32/AT91 SPI Controller driver"); -MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>"); +MODULE_AUTHOR("Haavard Skinnemoen (Atmel)"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:atmel_spi"); diff --git a/drivers/target/target_core_alua.c b/drivers/target/target_core_alua.c index 30cbb74..47abb42 100644 --- a/drivers/target/target_core_alua.c +++ b/drivers/target/target_core_alua.c @@ -1036,7 +1036,7 @@ core_alua_allocate_lu_gp(const char *name, int def_group) lu_gp = kmem_cache_zalloc(t10_alua_lu_gp_cache, GFP_KERNEL); if (!(lu_gp)) { printk(KERN_ERR "Unable to allocate struct t10_alua_lu_gp\n"); - return ERR_PTR(-ENOMEM);; + return ERR_PTR(-ENOMEM); } INIT_LIST_HEAD(&lu_gp->lu_gp_list); INIT_LIST_HEAD(&lu_gp->lu_gp_mem_list); @@ -1044,7 +1044,7 @@ core_alua_allocate_lu_gp(const char *name, int def_group) atomic_set(&lu_gp->lu_gp_ref_cnt, 0); if (def_group) { - lu_gp->lu_gp_id = se_global->alua_lu_gps_counter++;; + lu_gp->lu_gp_id = se_global->alua_lu_gps_counter++; lu_gp->lu_gp_valid_id = 1; se_global->alua_lu_gps_count++; } diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 9583b23..b9d3501 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -2128,7 +2128,7 @@ static void transport_failure_reset_queue_depth(struct se_device *dev) { unsigned long flags; - spin_lock_irqsave(&SE_HBA(dev)->hba_queue_lock, flags);; + spin_lock_irqsave(&SE_HBA(dev)->hba_queue_lock, flags); atomic_inc(&dev->depth_left); atomic_inc(&SE_HBA(dev)->left_queue_depth); spin_unlock_irqrestore(&SE_HBA(dev)->hba_queue_lock, flags); diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index 74273e6..77623b9 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -2128,7 +2128,7 @@ static int gsmld_attach_gsm(struct tty_struct *tty, struct gsm_mux *gsm) /** * gsmld_detach_gsm - stop doing 0710 mux - * @tty: tty atttached to the mux + * @tty: tty attached to the mux * @gsm: mux * * Shutdown and then clean up the resources used by the line discipline diff --git a/drivers/tty/serial/bfin_sport_uart.c b/drivers/tty/serial/bfin_sport_uart.c index c3ec0a6..891d194 100644 --- a/drivers/tty/serial/bfin_sport_uart.c +++ b/drivers/tty/serial/bfin_sport_uart.c @@ -296,8 +296,7 @@ static int sport_startup(struct uart_port *port) IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_DISABLED, "BFIN_SPORT_UART_CTS", up)) { up->cts_pin = -1; - dev_info(port->dev, "Unable to attach BlackFin UART \ - over SPORT CTS interrupt. So, disable it.\n"); + dev_info(port->dev, "Unable to attach BlackFin UART over SPORT CTS interrupt. So, disable it.\n"); } } if (up->rts_pin >= 0) diff --git a/drivers/tty/serial/mfd.c b/drivers/tty/serial/mfd.c index c111f36..cab52f4 100644 --- a/drivers/tty/serial/mfd.c +++ b/drivers/tty/serial/mfd.c @@ -49,8 +49,8 @@ static int hsu_dma_enable; module_param(hsu_dma_enable, int, 0); -MODULE_PARM_DESC(hsu_dma_enable, "It is a bitmap to set working mode, if \ -bit[x] is 1, then port[x] will work in DMA mode, otherwise in PIO mode."); +MODULE_PARM_DESC(hsu_dma_enable, + "It is a bitmap to set working mode, if bit[x] is 1, then port[x] will work in DMA mode, otherwise in PIO mode."); struct hsu_dma_buffer { u8 *buf; diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c index 2f548af..1bd2845 100644 --- a/drivers/tty/serial/mrst_max3110.c +++ b/drivers/tty/serial/mrst_max3110.c @@ -56,7 +56,7 @@ struct uart_max3110 { wait_queue_head_t wq; struct task_struct *main_thread; struct task_struct *read_thread; - struct mutex thread_mutex;; + struct mutex thread_mutex; u32 baud; u16 cur_conf; diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c index 21574cb..620c971 100644 --- a/drivers/tty/tty_ioctl.c +++ b/drivers/tty/tty_ioctl.c @@ -309,7 +309,7 @@ EXPORT_SYMBOL(tty_termios_input_baud_rate); * @ospeed: output speed * * Encode the speeds set into the passed termios structure. This is - * used as a library helper for drivers os that they can report back + * used as a library helper for drivers so that they can report back * the actual speed selected when it differs from the speed requested * * For maximal back compatibility with legacy SYS5/POSIX *nix behaviour diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c index e7c65a4..db1a659 100644 --- a/drivers/usb/gadget/atmel_usba_udc.c +++ b/drivers/usb/gadget/atmel_usba_udc.c @@ -2095,6 +2095,6 @@ static void __exit udc_exit(void) module_exit(udc_exit); MODULE_DESCRIPTION("Atmel USBA UDC driver"); -MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>"); +MODULE_AUTHOR("Haavard Skinnemoen (Atmel)"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:atmel_usba_udc"); diff --git a/drivers/usb/host/imx21-dbg.c b/drivers/usb/host/imx21-dbg.c index 512f647..6d75334 100644 --- a/drivers/usb/host/imx21-dbg.c +++ b/drivers/usb/host/imx21-dbg.c @@ -384,7 +384,7 @@ static void debug_isoc_show_one(struct seq_file *s, seq_printf(s, "%s %d:\n" "cc=0X%02X\n" "scheduled frame %d (%d)\n" - "submittted frame %d (%d)\n" + "submitted frame %d (%d)\n" "completed frame %d (%d)\n" "requested length=%d\n" "completed length=%d\n\n", diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index 4f65b14..448b9d1 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -53,9 +53,10 @@ /* * Version Information */ -#define DRIVER_AUTHOR "Linus 'Frodo Rabbit' Torvalds, Johannes Erdfelt, \ -Randy Dunlap, Georg Acher, Deti Fliegl, Thomas Sailer, Roman Weissgaerber, \ -Alan Stern" +#define DRIVER_AUTHOR \ + "Linus 'Frodo Rabbit' Torvalds, Johannes Erdfelt, " \ + "Randy Dunlap, Georg Acher, Deti Fliegl, Thomas Sailer, " \ + "Roman Weissgaerber, Alan Stern" #define DRIVER_DESC "USB Universal Host Controller Interface driver" /* for flakey hardware, ignore overcurrent indicators */ diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index 388cc12..ff9a01f 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -104,7 +104,7 @@ get_endpoints(struct usbtest_dev *dev, struct usb_interface *intf) alt = intf->altsetting + tmp; /* take the first altsetting with in-bulk + out-bulk; - * ignore other endpoints and altsetttings. + * ignore other endpoints and altsettings. */ for (ep = 0; ep < alt->desc.bNumEndpoints; ep++) { struct usb_host_endpoint *e; diff --git a/drivers/usb/storage/ene_ub6250.c b/drivers/usb/storage/ene_ub6250.c index 0e5aafd..31645af 100644 --- a/drivers/usb/storage/ene_ub6250.c +++ b/drivers/usb/storage/ene_ub6250.c @@ -715,8 +715,8 @@ static int ene_ub6250_probe(struct usb_interface *intf, if (!(misc_reg03 & 0x01)) { result = -ENODEV; - printk(KERN_NOTICE "ums_eneub6250: The driver only supports SD\ - card. To use SM/MS card, please build driver/stagging/keucr\n"); + printk(KERN_NOTICE "ums_eneub6250: The driver only supports SD card. " + "To use SM/MS card, please build driver/staging/keucr\n"); usb_stor_disconnect(intf); } diff --git a/drivers/video/backlight/ltv350qv.c b/drivers/video/backlight/ltv350qv.c index dd0e84a..cca43c0 100644 --- a/drivers/video/backlight/ltv350qv.c +++ b/drivers/video/backlight/ltv350qv.c @@ -333,7 +333,7 @@ static void __exit ltv350qv_exit(void) module_init(ltv350qv_init); module_exit(ltv350qv_exit); -MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>"); +MODULE_AUTHOR("Haavard Skinnemoen (Atmel)"); MODULE_DESCRIPTION("Samsung LTV350QV LCD Driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS("spi:ltv350qv"); diff --git a/drivers/video/console/newport_con.c b/drivers/video/console/newport_con.c index 3772433..93317b5 100644 --- a/drivers/video/console/newport_con.c +++ b/drivers/video/console/newport_con.c @@ -6,7 +6,7 @@ * * This driver is based on sgicons.c and cons_newport. * - * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com) + * Copyright (C) 1996 David S. Miller (davem@davemloft.net) * Copyright (C) 1997 Miguel de Icaza (miguel@nuclecu.unam.mx) */ #include <linux/init.h> diff --git a/drivers/video/msm/mddi.c b/drivers/video/msm/mddi.c index b66d86a..178b072 100644 --- a/drivers/video/msm/mddi.c +++ b/drivers/video/msm/mddi.c @@ -679,7 +679,7 @@ static int __devinit mddi_probe(struct platform_device *pdev) printk(KERN_ERR "mddi: no associated mem resource!\n"); return -ENOMEM; } - mddi->base = ioremap(resource->start, resource->end - resource->start); + mddi->base = ioremap(resource->start, resource_size(resource)); if (!mddi->base) { printk(KERN_ERR "mddi: failed to remap base!\n"); ret = -EINVAL; diff --git a/drivers/video/mxsfb.c b/drivers/video/mxsfb.c index 7d02848..0b2f2dd 100644 --- a/drivers/video/mxsfb.c +++ b/drivers/video/mxsfb.c @@ -401,7 +401,7 @@ static int mxsfb_set_par(struct fb_info *fb_info) writel(CTRL1_FIFO_CLEAR, host->base + LCDC_CTRL1 + REG_SET); ctrl = CTRL_BYPASS_COUNT | CTRL_MASTER | - CTRL_SET_BUS_WIDTH(host->ld_intf_width);; + CTRL_SET_BUS_WIDTH(host->ld_intf_width); switch (fb_info->var.bits_per_pixel) { case 16: diff --git a/drivers/watchdog/bcm63xx_wdt.c b/drivers/watchdog/bcm63xx_wdt.c index 3c5045a..5064e83 100644 --- a/drivers/watchdog/bcm63xx_wdt.c +++ b/drivers/watchdog/bcm63xx_wdt.c @@ -248,7 +248,7 @@ static int __devinit bcm63xx_wdt_probe(struct platform_device *pdev) return -ENODEV; } - bcm63xx_wdt_device.regs = ioremap_nocache(r->start, r->end - r->start); + bcm63xx_wdt_device.regs = ioremap_nocache(r->start, resource_size(r)); if (!bcm63xx_wdt_device.regs) { dev_err(&pdev->dev, "failed to remap I/O resources\n"); return -ENXIO; diff --git a/drivers/xen/evtchn.c b/drivers/xen/evtchn.c index ef11daf..dbc13e9 100644 --- a/drivers/xen/evtchn.c +++ b/drivers/xen/evtchn.c @@ -470,7 +470,7 @@ static int evtchn_open(struct inode *inode, struct file *filp) filp->private_data = u; - return nonseekable_open(inode, filp);; + return nonseekable_open(inode, filp); } static int evtchn_release(struct inode *inode, struct file *filp) diff --git a/drivers/xen/swiotlb-xen.c b/drivers/xen/swiotlb-xen.c index 54469c3..65ea21a 100644 --- a/drivers/xen/swiotlb-xen.c +++ b/drivers/xen/swiotlb-xen.c @@ -54,7 +54,7 @@ u64 start_dma_addr; static dma_addr_t xen_phys_to_bus(phys_addr_t paddr) { - return phys_to_machine(XPADDR(paddr)).maddr;; + return phys_to_machine(XPADDR(paddr)).maddr; } static phys_addr_t xen_bus_to_phys(dma_addr_t baddr) |