1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
|
/*
* Alchemy/AMD/RMI DB1200 board setup.
*
* Licensed under the terms outlined in the file COPYING in the root of
* this source archive.
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-db1x00/bcsr.h>
#include <asm/mach-db1x00/db1200.h>
const char *get_system_type(void)
{
return "Alchemy Db1200";
}
void __init board_setup(void)
{
unsigned long freq0, clksrc, div, pfc;
unsigned short whoami;
bcsr_init(DB1200_BCSR_PHYS_ADDR,
DB1200_BCSR_PHYS_ADDR + DB1200_BCSR_HEXLED_OFS);
whoami = bcsr_read(BCSR_WHOAMI);
printk(KERN_INFO "Alchemy/AMD/RMI DB1200 Board, CPLD Rev %d"
" Board-ID %d Daughtercard ID %d\n",
(whoami >> 4) & 0xf, (whoami >> 8) & 0xf, whoami & 0xf);
/* SMBus/SPI on PSC0, Audio on PSC1 */
pfc = __raw_readl((void __iomem *)SYS_PINFUNC);
pfc &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B);
pfc &= ~(SYS_PINFUNC_P1A | SYS_PINFUNC_P1B | SYS_PINFUNC_FS3);
pfc |= SYS_PINFUNC_P1C; /* SPI is configured later */
__raw_writel(pfc, (void __iomem *)SYS_PINFUNC);
wmb();
/* Clock configurations: PSC0: ~50MHz via Clkgen0, derived from
* CPU clock; all other clock generators off/unused.
*/
div = (get_au1x00_speed() + 25000000) / 50000000;
if (div & 1)
div++;
div = ((div >> 1) - 1) & 0xff;
freq0 = div << SYS_FC_FRDIV0_BIT;
__raw_writel(freq0, (void __iomem *)SYS_FREQCTRL0);
wmb();
freq0 |= SYS_FC_FE0; /* enable F0 */
__raw_writel(freq0, (void __iomem *)SYS_FREQCTRL0);
wmb();
/* psc0_intclk comes 1:1 from F0 */
clksrc = SYS_CS_MUX_FQ0 << SYS_CS_ME0_BIT;
__raw_writel(clksrc, (void __iomem *)SYS_CLKSRC);
wmb();
}
static int __init db1200_arch_init(void)
{
/* GPIO7 is low-level triggered CPLD cascade */
irq_set_irq_type(AU1200_GPIO7_INT, IRQF_TRIGGER_LOW);
bcsr_init_irq(DB1200_INT_BEGIN, DB1200_INT_END, AU1200_GPIO7_INT);
/* insert/eject pairs: one of both is always screaming. To avoid
* issues they must not be automatically enabled when initially
* requested.
*/
irq_set_status_flags(DB1200_SD0_INSERT_INT, IRQ_NOAUTOEN);
irq_set_status_flags(DB1200_SD0_EJECT_INT, IRQ_NOAUTOEN);
irq_set_status_flags(DB1200_PC0_INSERT_INT, IRQ_NOAUTOEN);
irq_set_status_flags(DB1200_PC0_EJECT_INT, IRQ_NOAUTOEN);
irq_set_status_flags(DB1200_PC1_INSERT_INT, IRQ_NOAUTOEN);
irq_set_status_flags(DB1200_PC1_EJECT_INT, IRQ_NOAUTOEN);
return 0;
}
arch_initcall(db1200_arch_init);
|
