aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorStefan Richter <stefanr@s5r6.in-berlin.de>2010-10-10 00:54:02 +0200
committerStefan Richter <stefanr@s5r6.in-berlin.de>2010-10-11 14:48:03 +0200
commit1ef5b816c0eaf84f91106cfc0893069c49e86113 (patch)
tree5db2c91a18ce2aa40177c2c968b0ed5f15de251b
parentcb655d0f3d57c23db51b981648e452988c0223f9 (diff)
downloadkernel_samsung_smdk4412-1ef5b816c0eaf84f91106cfc0893069c49e86113.zip
kernel_samsung_smdk4412-1ef5b816c0eaf84f91106cfc0893069c49e86113.tar.gz
kernel_samsung_smdk4412-1ef5b816c0eaf84f91106cfc0893069c49e86113.tar.bz2
ieee1394: move init_ohci1394_dma to drivers/firewire/
because drivers/ieee1394/ will be deleted. Additional changes: - add some #include directives - adjust to use firewire/ohci.h instead of ieee1394/ohci1394.h, replace struct ti_ohci by a minimal struct ohci, replace quadlet_t from ieee1394_types.h by u32 - two or three trivial stylistic changes - __iomem annotation Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
-rw-r--r--drivers/firewire/Makefile1
-rw-r--r--drivers/firewire/init_ohci1394_dma.c (renamed from drivers/ieee1394/init_ohci1394_dma.c)76
-rw-r--r--drivers/ieee1394/Makefile2
3 files changed, 51 insertions, 28 deletions
diff --git a/drivers/firewire/Makefile b/drivers/firewire/Makefile
index 3c6a7fb..e3870d5 100644
--- a/drivers/firewire/Makefile
+++ b/drivers/firewire/Makefile
@@ -13,3 +13,4 @@ obj-$(CONFIG_FIREWIRE_OHCI) += firewire-ohci.o
obj-$(CONFIG_FIREWIRE_SBP2) += firewire-sbp2.o
obj-$(CONFIG_FIREWIRE_NET) += firewire-net.o
obj-$(CONFIG_FIREWIRE_NOSY) += nosy.o
+obj-$(CONFIG_PROVIDE_OHCI1394_DMA_INIT) += init_ohci1394_dma.o
diff --git a/drivers/ieee1394/init_ohci1394_dma.c b/drivers/firewire/init_ohci1394_dma.c
index ddaab6e..a9a347a 100644
--- a/drivers/ieee1394/init_ohci1394_dma.c
+++ b/drivers/firewire/init_ohci1394_dma.c
@@ -32,23 +32,41 @@
* Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
-#include <linux/interrupt.h> /* for ohci1394.h */
#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
#include <linux/pci.h> /* for PCI defines */
-#include <linux/init_ohci1394_dma.h>
+#include <linux/string.h>
+
#include <asm/pci-direct.h> /* for direct PCI config space access */
#include <asm/fixmap.h>
-#include "ieee1394_types.h"
-#include "ohci1394.h"
+#include <linux/init_ohci1394_dma.h>
+#include "ohci.h"
int __initdata init_ohci1394_dma_early;
+struct ohci {
+ void __iomem *registers;
+};
+
+static inline void reg_write(const struct ohci *ohci, int offset, u32 data)
+{
+ writel(data, ohci->registers + offset);
+}
+
+static inline u32 reg_read(const struct ohci *ohci, int offset)
+{
+ return readl(ohci->registers + offset);
+}
+
+#define OHCI_LOOP_COUNT 100 /* Number of loops for reg read waits */
+
/* Reads a PHY register of an OHCI-1394 controller */
-static inline u8 __init get_phy_reg(struct ti_ohci *ohci, u8 addr)
+static inline u8 __init get_phy_reg(struct ohci *ohci, u8 addr)
{
int i;
- quadlet_t r;
+ u32 r;
reg_write(ohci, OHCI1394_PhyControl, (addr << 8) | 0x00008000);
@@ -63,22 +81,22 @@ static inline u8 __init get_phy_reg(struct ti_ohci *ohci, u8 addr)
}
/* Writes to a PHY register of an OHCI-1394 controller */
-static inline void __init set_phy_reg(struct ti_ohci *ohci, u8 addr, u8 data)
+static inline void __init set_phy_reg(struct ohci *ohci, u8 addr, u8 data)
{
int i;
reg_write(ohci, OHCI1394_PhyControl, (addr << 8) | data | 0x00004000);
for (i = 0; i < OHCI_LOOP_COUNT; i++) {
- u32 r = reg_read(ohci, OHCI1394_PhyControl);
- if (!(r & 0x00004000))
+ if (!(reg_read(ohci, OHCI1394_PhyControl) & 0x00004000))
break;
mdelay(1);
}
}
/* Resets an OHCI-1394 controller (for sane state before initialization) */
-static inline void __init init_ohci1394_soft_reset(struct ti_ohci *ohci) {
+static inline void __init init_ohci1394_soft_reset(struct ohci *ohci)
+{
int i;
reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_softReset);
@@ -91,10 +109,14 @@ static inline void __init init_ohci1394_soft_reset(struct ti_ohci *ohci) {
}
}
+#define OHCI1394_MAX_AT_REQ_RETRIES 0xf
+#define OHCI1394_MAX_AT_RESP_RETRIES 0x2
+#define OHCI1394_MAX_PHYS_RESP_RETRIES 0x8
+
/* Basic OHCI-1394 register and port inititalization */
-static inline void __init init_ohci1394_initialize(struct ti_ohci *ohci)
+static inline void __init init_ohci1394_initialize(struct ohci *ohci)
{
- quadlet_t bus_options;
+ u32 bus_options;
int num_ports, i;
/* Put some defaults to these undefined bus options */
@@ -116,7 +138,7 @@ static inline void __init init_ohci1394_initialize(struct ti_ohci *ohci)
/* enable phys */
reg_write(ohci, OHCI1394_LinkControlSet,
- OHCI1394_LinkControl_RcvPhyPkt);
+ OHCI1394_LinkControl_rcvPhyPkt);
/* Don't accept phy packets into AR request context */
reg_write(ohci, OHCI1394_LinkControlClear, 0x00000400);
@@ -128,7 +150,7 @@ static inline void __init init_ohci1394_initialize(struct ti_ohci *ohci)
reg_write(ohci, OHCI1394_IsoXmitIntEventClear, 0xffffffff);
/* Accept asyncronous transfer requests from all nodes for now */
- reg_write(ohci,OHCI1394_AsReqFilterHiSet, 0x80000000);
+ reg_write(ohci, OHCI1394_AsReqFilterHiSet, 0x80000000);
/* Specify asyncronous transfer retries */
reg_write(ohci, OHCI1394_ATRetries,
@@ -137,7 +159,8 @@ static inline void __init init_ohci1394_initialize(struct ti_ohci *ohci)
(OHCI1394_MAX_PHYS_RESP_RETRIES<<8));
/* We don't want hardware swapping */
- reg_write(ohci, OHCI1394_HCControlClear, OHCI1394_HCControl_noByteSwap);
+ reg_write(ohci, OHCI1394_HCControlClear,
+ OHCI1394_HCControl_noByteSwapData);
/* Enable link */
reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_linkEnable);
@@ -164,11 +187,11 @@ static inline void __init init_ohci1394_initialize(struct ti_ohci *ohci)
* has to be enabled after each bus reset when needed. We resort
* to polling here because on early boot, we have no interrupts.
*/
-static inline void __init init_ohci1394_wait_for_busresets(struct ti_ohci *ohci)
+static inline void __init init_ohci1394_wait_for_busresets(struct ohci *ohci)
{
int i, events;
- for (i=0; i < 9; i++) {
+ for (i = 0; i < 9; i++) {
mdelay(200);
events = reg_read(ohci, OHCI1394_IntEventSet);
if (events & OHCI1394_busReset)
@@ -182,18 +205,18 @@ static inline void __init init_ohci1394_wait_for_busresets(struct ti_ohci *ohci)
* This enables remote DMA access over IEEE1394 from every host for the low
* 4GB of address space. DMA accesses above 4GB are not available currently.
*/
-static inline void __init init_ohci1394_enable_physical_dma(struct ti_ohci *hci)
+static inline void __init init_ohci1394_enable_physical_dma(struct ohci *ohci)
{
- reg_write(hci, OHCI1394_PhyReqFilterHiSet, 0xffffffff);
- reg_write(hci, OHCI1394_PhyReqFilterLoSet, 0xffffffff);
- reg_write(hci, OHCI1394_PhyUpperBound, 0xffff0000);
+ reg_write(ohci, OHCI1394_PhyReqFilterHiSet, 0xffffffff);
+ reg_write(ohci, OHCI1394_PhyReqFilterLoSet, 0xffffffff);
+ reg_write(ohci, OHCI1394_PhyUpperBound, 0xffff0000);
}
/**
* init_ohci1394_reset_and_init_dma - init controller and enable DMA
* This initializes the given controller and enables physical DMA engine in it.
*/
-static inline void __init init_ohci1394_reset_and_init_dma(struct ti_ohci *ohci)
+static inline void __init init_ohci1394_reset_and_init_dma(struct ohci *ohci)
{
/* Start off with a soft reset, clears everything to a sane state. */
init_ohci1394_soft_reset(ohci);
@@ -225,7 +248,7 @@ static inline void __init init_ohci1394_reset_and_init_dma(struct ti_ohci *ohci)
static inline void __init init_ohci1394_controller(int num, int slot, int func)
{
unsigned long ohci_base;
- struct ti_ohci ohci;
+ struct ohci ohci;
printk(KERN_INFO "init_ohci1394_dma: initializing OHCI-1394"
" at %02x:%02x.%x\n", num, slot, func);
@@ -235,7 +258,7 @@ static inline void __init init_ohci1394_controller(int num, int slot, int func)
set_fixmap_nocache(FIX_OHCI1394_BASE, ohci_base);
- ohci.registers = (void *)fix_to_virt(FIX_OHCI1394_BASE);
+ ohci.registers = (void __iomem *)fix_to_virt(FIX_OHCI1394_BASE);
init_ohci1394_reset_and_init_dma(&ohci);
}
@@ -247,6 +270,7 @@ static inline void __init init_ohci1394_controller(int num, int slot, int func)
void __init init_ohci1394_dma_on_all_controllers(void)
{
int num, slot, func;
+ u32 class;
if (!early_pci_allowed())
return;
@@ -255,9 +279,9 @@ void __init init_ohci1394_dma_on_all_controllers(void)
for (num = 0; num < 32; num++) {
for (slot = 0; slot < 32; slot++) {
for (func = 0; func < 8; func++) {
- u32 class = read_pci_config(num,slot,func,
+ class = read_pci_config(num, slot, func,
PCI_CLASS_REVISION);
- if ((class == 0xffffffff))
+ if (class == 0xffffffff)
continue; /* No device at this func */
if (class>>8 != PCI_CLASS_SERIAL_FIREWIRE_OHCI)
diff --git a/drivers/ieee1394/Makefile b/drivers/ieee1394/Makefile
index 1f8153b..427b86b 100644
--- a/drivers/ieee1394/Makefile
+++ b/drivers/ieee1394/Makefile
@@ -14,5 +14,3 @@ obj-$(CONFIG_IEEE1394_RAWIO) += raw1394.o
obj-$(CONFIG_IEEE1394_SBP2) += sbp2.o
obj-$(CONFIG_IEEE1394_DV1394) += dv1394.o
obj-$(CONFIG_IEEE1394_ETH1394) += eth1394.o
-
-obj-$(CONFIG_PROVIDE_OHCI1394_DMA_INIT) += init_ohci1394_dma.o