bcmdhd: update from i9305 source drop (1.141.15 --> 1.141.44)

Change-Id: I0b38869c9f0d5c8695e543b0fc363aff7c9e617a

26 files changed, 2793 insertions, 91 deletions

diff --git a/drivers/net/wireless/bcmdhd/Makefile b/drivers/net/wireless/bcmdhd/Makefile
index 5121318..7d36a23 100644
--- a/drivers/net/wireless/bcmdhd/Makefile
+++ b/drivers/net/wireless/bcmdhd/Makefile
@@ -91,6 +91,98 @@ DHDCFLAGS += -DWL_CFG80211_STA_EVENT
 #########################
 # Chip dependent feature
 #########################
+ifneq ($(CONFIG_BCM4354),)
+  DHDCFLAGS += -DBCM4354_CHIP -DHW_OOB -DSUPPORT_MULTIPLE_REVISION
+  DHDCFLAGS += -DMIMO_ANT_SETTING
+  DHDCFLAGS += -DUSE_CID_CHECK
+  DHDCFLAGS += -DENABLE_BCN_LI_BCN_WAKEUP
+  DHDCFLAGS += -DSDIO_CRC_ERROR_FIX
+
+# tput enhancement
+  DHDCFLAGS += -DCUSTOM_GLOM_SETTING=8 -DCUSTOM_RXCHAIN=1
+  DHDCFLAGS += -DUSE_DYNAMIC_F2_BLKSIZE -DDYNAMIC_F2_BLKSIZE_FOR_NONLEGACY=128
+  DHDCFLAGS += -DBCMSDIOH_TXGLOM -DCUSTOM_TXGLOM=1 -DBCMSDIOH_TXGLOM_HIGHSPEED
+  DHDCFLAGS += -DDHDTCPACK_SUPPRESS
+  DHDCFLAGS += -DUSE_WL_TXBF
+  DHDCFLAGS += -DUSE_WL_FRAMEBURST
+  DHDCFLAGS += -DRXFRAME_THREAD
+  DHDCFLAGS += -DREPEAT_READFRAME
+  DHDCFLAGS += -DCUSTOM_AMPDU_BA_WSIZE=64 -DCUSTOM_IBSS_AMPDU_BA_WSIZE=16
+  DHDCFLAGS += -DCUSTOM_DPC_CPUCORE=0
+  DHDCFLAGS += -DPROP_TXSTATUS_VSDB
+  DHDCFLAGS += -DCUSTOM_DEF_TXGLOM_SIZE=40 -DDHD_TXBOUND=40
+  DHDCFLAGS += -DENABLE_ADAPTIVE_SCHED -DCUSTOM_CPUFREQ_THRESH=1000000
+  DHDCFLAGS += -DCUSTOM_MAX_TXGLOM_SIZE=40
+  DHDCFLAGS += -DMAX_HDR_READ=128
+  DHDCFLAGS += -DDHD_FIRSTREAD=128
+  DHDCFLAGS += -DCUSTOM_AMPDU_MPDU=16
+  DHDCFLAGS += -DCUSTOM_TXINRX_THRES=64
+
+# New Features
+  DHDCFLAGS += -DWL11U
+  DHDCFLAGS += -DBCMCCX
+  DHDCFLAGS += -DWES_SUPPORT
+  DHDCFLAGS += -DOKC_SUPPORT
+  DHDCFLAGS += -DWLTDLS
+  DHDCFLAGS += -DWLFBT
+  DHDCFLAGS += -DDHD_ENABLE_LPC
+  DHDCFLAGS += -DWLAIBSS
+  DHDCFLAGS += -DSUPPORT_LTECX
+  DHDCFLAGS += -DSUPPORT_2G_VHT
+  DHDCFLAGS += -DSUPPORT_WL_TXPOWER
+  DHDCFLAGS += -DTEST_TX_POWER_CONTROL
+ifeq ($(CONFIG_BCM4354),y)
+  DHDCFLAGS += -DENABLE_INSMOD_NO_FW_LOAD
+  DHDCFLAGS += -DUSE_LATE_INITCALL_SYNC
+  DRIVER_TYPE = y
+endif
+  DHDCFLAGS += -DCUSTOM_PSPRETEND_THR=30
+  DHDCFLAGS += -DSUPPORT_P2P_GO_PS
+endif
+
+ifneq ($(CONFIG_BCM4339),)
+  DHDCFLAGS += -DBCM4339_CHIP -DHW_OOB
+  DHDCFLAGS += -DUSE_CID_CHECK
+  DHDCFLAGS += -DENABLE_BCN_LI_BCN_WAKEUP
+  DHDCFLAGS += -DUSE_SDIOFIFO_IOVAR
+
+  # tput enhancement
+  DHDCFLAGS += -DCUSTOM_GLOM_SETTING=8 -DCUSTOM_RXCHAIN=1
+  DHDCFLAGS += -DUSE_DYNAMIC_F2_BLKSIZE -DDYNAMIC_F2_BLKSIZE_FOR_NONLEGACY=128
+  DHDCFLAGS += -DBCMSDIOH_TXGLOM -DCUSTOM_TXGLOM=1 -DBCMSDIOH_TXGLOM_HIGHSPEED
+  DHDCFLAGS += -DDHDTCPACK_SUPPRESS
+  DHDCFLAGS += -DUSE_WL_TXBF
+  DHDCFLAGS += -DUSE_WL_FRAMEBURST
+  DHDCFLAGS += -DRXFRAME_THREAD
+  DHDCFLAGS += -DCUSTOM_AMPDU_BA_WSIZE=64 -DCUSTOM_IBSS_AMPDU_BA_WSIZE=16
+  DHDCFLAGS += -DCUSTOM_DPC_CPUCORE=0
+  DHDCFLAGS += -DPROP_TXSTATUS_VSDB
+ifeq ($(CONFIG_ARCH_MSM),y)
+  DHDCFLAGS += -DCUSTOM_DEF_TXGLOM_SIZE=32 -DDHD_TXBOUND=32
+  DHDCFLAGS += -DENABLE_ADAPTIVE_SCHED -DCUSTOM_CPUFREQ_THRESH=1000000
+endif
+  DHDCFLAGS += -DCUSTOM_MAX_TXGLOM_SIZE=32
+
+  # New Features
+  DHDCFLAGS += -DWL11U
+  DHDCFLAGS += -DBCMCCX
+  DHDCFLAGS += -DWES_SUPPORT
+  DHDCFLAGS += -DOKC_SUPPORT
+  DHDCFLAGS += -DWLTDLS -DWLTDLS_AUTO_ENABLE
+  DHDCFLAGS += -DWLFBT
+  DHDCFLAGS += -DDHD_ENABLE_LPC
+  DHDCFLAGS += -DWLAIBSS
+  DHDCFLAGS += -DSUPPORT_LTECX
+  DHDCFLAGS += -DSUPPORT_2G_VHT
+  DHDCFLAGS += -DSUPPORT_WL_TXPOWER
+  DHDCFLAGS += -DBCMCCX_S69
+ifeq ($(CONFIG_BCM4339),y)
+  DHDCFLAGS += -DENABLE_INSMOD_NO_FW_LOAD
+  DHDCFLAGS += -DUSE_LATE_INITCALL_SYNC
+  DRIVER_TYPE = y
+endif
+  DHDCFLAGS += -DCUSTOM_PSPRETEND_THR=30
+endif
 
 ifneq ($(CONFIG_BCM4335),)
   DHDCFLAGS += -DBCM4335_CHIP -DHW_OOB -DSUPPORT_MULTIPLE_REVISION
@@ -143,6 +235,19 @@ ifneq ($(CONFIG_BCM4334),)
   DHDCFLAGS += -DROAM_AP_ENV_DETECTION
   DHDCFLAGS += -DWES_SUPPORT
   DHDCFLAGS :=$(filter-out -DWL_CFG80211_GON_COLLISION,$(DHDCFLAGS))
+  DHDCFLAGS += -DSUPPORT_WL_TXPOWER
+
+  # New Features
+#  DHDCFLAGS += -DWL11U
+  DHDCFLAGS += -DBCMCCX
+  DHDCFLAGS += -DOKC_SUPPORT
+  DHDCFLAGS += -DWES_SUPPORT
+  DHDCFLAGS += -DWLFBT
+ifeq ($(CONFIG_BCM4334),y)
+  DHDCFLAGS += -DENABLE_INSMOD_NO_FW_LOAD
+  DHDCFLAGS += -DUSE_LATE_INITCALL_SYNC
+  DRIVER_TYPE = y
+endif
 endif
 
 ifneq ($(CONFIG_BCM4330),)
diff --git a/drivers/net/wireless/bcmdhd/dhd_custom_sec.c b/drivers/net/wireless/bcmdhd/dhd_custom_sec.c
index be129b5..055c93d 100755
--- a/drivers/net/wireless/bcmdhd/dhd_custom_sec.c
+++ b/drivers/net/wireless/bcmdhd/dhd_custom_sec.c
@@ -853,10 +853,10 @@ vid_info_t vid_info[] = {
 };
 #elif defined(BCM4334_CHIP)
 vid_info_t vid_info[] = {
-	{ 3, { 0x33, 0x33, }, { "semco" } },
-	{ 3, { 0xfb, 0x50, }, { "semcosh" } },
+	{ 6, { 0x00, 0x00, 0x00, 0x33, 0x33, }, { "semco" } },
+	{ 6, { 0x00, 0x00, 0x00, 0xfb, 0x50, }, { "semcosh" } },
 	{ 6, { 0x00, 0x20, 0xc7, 0x00, 0x00, }, { "murata" } },
-	{ 0, { 0x00, }, { "samsung" } }
+	{ 0, { 0x00, }, { "murata" } }
 };
 #else /* BCM4335_CHIP */
 vid_info_t vid_info[] = {
@@ -1075,6 +1075,70 @@ int dhd_check_module_mac(dhd_pub_t *dhd, struct ether_addr *mac)
 			mac_id[0], mac_id[1], mac_id[2], mac_id[3], mac_id[4],
 			mac_id[5]);
 		DHD_ERROR(("[WIFI]mac_id is setted from OTP \n"));
+
+		/* Find a new tuple tag */
+		while (index < remained_len) {
+			if (cis_buf[index] == CIS_TUPLE_TAG_START) {
+				remained_len -= index;
+				if (remained_len >= sizeof(bcm_tlv_t)) {
+					elt = (bcm_tlv_t *)&cis_buf[index];
+				}
+				break;
+			} else {
+				index++;
+			}
+
+		}
+
+		/* Find a MAC address tuple */
+		while (elt && remained_len >= TLV_HDR_LEN) {
+			int body_len = (int)elt->len;
+
+			if ((elt->id == CIS_TUPLE_TAG_START) &&
+				(remained_len >= (body_len + TLV_HDR_LEN)) &&
+				(*elt->data == CIS_TUPLE_TAG_MACADDR)) {
+				/* found MAC Address tuple and
+				 * get the MAC Address data
+				 */
+				mac_addr = (uint8 *)elt + CIS_TUPLE_TAG_MACADDR_OFF;
+				break;
+			}
+		}
+
+		/* Find a MAC address tuple */
+		while (elt && remained_len >= TLV_HDR_LEN) {
+			int body_len = (int)elt->len;
+
+			if ((elt->id == CIS_TUPLE_TAG_START) &&
+				(remained_len >= (body_len + TLV_HDR_LEN)) &&
+				(*elt->data == CIS_TUPLE_TAG_MACADDR)) {
+				/* found MAC Address tuple and
+				 * get the MAC Address data
+				 */
+				mac_addr = (uint8 *)elt + CIS_TUPLE_TAG_MACADDR_OFF;
+				break;
+			}
+
+			/* Go to next tuple if tuple value
+			 * is not MAC address type
+			 */
+			elt = (bcm_tlv_t *)((uint8 *)elt + (body_len + TLV_HDR_LEN));
+			remained_len -= (body_len + TLV_HDR_LEN);
+		}
+
+		if (mac_addr) {
+			sprintf(otp_mac_buf, "%02X:%02X:%02X:%02X:%02X:%02X\n",
+				mac_addr[0], mac_addr[1], mac_addr[2],
+				mac_addr[3], mac_addr[4], mac_addr[5]);
+			DHD_ERROR(("[WIFI_SEC] MAC address is taken from OTP\n"));
+		} else {
+			sprintf(otp_mac_buf, "%02X:%02X:%02X:%02X:%02X:%02X\n",
+				mac->octet[0], mac->octet[1], mac->octet[2],
+				mac->octet[3], mac->octet[4], mac->octet[5]);
+			DHD_ERROR(("[WIFI_SEC] %s: Cannot find MAC address info from OTP,"
+				" Check module mac by initial value: " MACDBG "\n",
+				__FUNCTION__, MAC2STRDBG(mac->octet)));
+		}
 	}
 
 	fp_mac = filp_open(macfilepath, O_RDONLY, 0);
diff --git a/drivers/net/wireless/bcmdhd/dhd_linux.c b/drivers/net/wireless/bcmdhd/dhd_linux.c
index ff8e634..4aedc1a 100644
--- a/drivers/net/wireless/bcmdhd/dhd_linux.c
+++ b/drivers/net/wireless/bcmdhd/dhd_linux.c
@@ -4029,6 +4029,26 @@ dhd_preinit_ioctls(dhd_pub_t *dhd)
 	dhd->suspend_bcn_li_dtim = CUSTOM_SUSPEND_BCN_LI_DTIM;
 	DHD_TRACE(("Enter %s\n", __FUNCTION__));
 	dhd->op_mode = 0;
+#ifdef CUSTOMER_HW4
+	if (!dhd_validate_chipid(dhd)) {
+		DHD_ERROR(("%s: CONFIG_BCMXXX and CHIP ID(%x) is mismatched\n",
+			__FUNCTION__, dhd_bus_chip_id(dhd)));
+#ifndef SUPPORT_MULTIPLE_CHIPS
+		return BCME_BADARG;
+#endif /* !SUPPORT_MULTIPLE_CHIPS */
+	}
+#endif /* CUSTOMER_HW4 */
+	if ((!op_mode && dhd_get_fw_mode(dhd->info) == DHD_FLAG_MFG_MODE) ||
+		(op_mode == DHD_FLAG_MFG_MODE)) {
+		/* Check and adjust IOCTL response timeout for Manufactring firmware */
+		dhd_os_set_ioctl_resp_timeout(MFG_IOCTL_RESP_TIMEOUT);
+		DHD_ERROR(("%s : Set IOCTL response time for Manufactring Firmware\n",
+			__FUNCTION__));
+	}
+	else {
+		dhd_os_set_ioctl_resp_timeout(IOCTL_RESP_TIMEOUT);
+		DHD_INFO(("%s : Set IOCTL response time.\n", __FUNCTION__));
+	}
 #ifdef GET_CUSTOM_MAC_ENABLE
 	ret = dhd_custom_get_mac_address(ea_addr.octet);
 	if (!ret) {
diff --git a/drivers/net/wireless/bcmdhd/dhd_sec_feature.h b/drivers/net/wireless/bcmdhd/dhd_sec_feature.h
index 98a41a0..36e9c94 100755
--- a/drivers/net/wireless/bcmdhd/dhd_sec_feature.h
+++ b/drivers/net/wireless/bcmdhd/dhd_sec_feature.h
@@ -1,14 +1,14 @@
 /*
  * Customer HW 4 dependant file
  *
- * Copyright (C) 1999-2012, Broadcom Corporation
- * 
+ * Copyright (C) 1999-2014, Broadcom Corporation
+ *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
  * under the terms of the GNU General Public License version 2 (the "GPL"),
  * available at http://www.broadcom.com/licenses/GPLv2.php, with the
  * following added to such license:
- * 
+ *
  *      As a special exception, the copyright holders of this software give you
  * permission to link this software with independent modules, and to copy and
  * distribute the resulting executable under terms of your choice, provided that
@@ -16,7 +16,7 @@
  * the license of that module.  An independent module is a module which is not
  * derived from this software.  The special exception does not apply to any
  * modifications of the software.
- * 
+ *
  *      Notwithstanding the above, under no circumstances may you combine this
  * software in any way with any other Broadcom software provided under a license
  * other than the GPL, without Broadcom's express prior written consent.
@@ -59,6 +59,10 @@
 #define READ_MACADDR
 #endif /* CONFIG_MACH_P10 */
 
+#if defined(CONFIG_MACH_M0) ||defined(CONFIG_MACH_C1) ||defined(CONFIG_MACH_T0)
+#define WL11U
+#endif
+
 #ifdef CONFIG_ARCH_MSM8960
 #undef WIFI_TURNOFF_DELAY
 #define WIFI_TURNOFF_DELAY	200
diff --git a/drivers/net/wireless/bcmdhd/include/devctrl_if/wlioctl_defs.h b/drivers/net/wireless/bcmdhd/include/devctrl_if/wlioctl_defs.h
new file mode 100644
index 0000000..77e37fe
--- /dev/null
+++ b/drivers/net/wireless/bcmdhd/include/devctrl_if/wlioctl_defs.h
@@ -0,0 +1,2055 @@
+/*
+ * Custom OID/ioctl definitions for
+ * Broadcom 802.11abg Networking Device Driver
+ *
+ * Definitions subject to change without notice.
+ *
+ * Copyright (C) 1999-2014, Broadcom Corporation
+ * 
+ *      Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ * 
+ *      As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module.  An independent module is a module which is not
+ * derived from this software.  The special exception does not apply to any
+ * modifications of the software.
+ * 
+ *      Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: wlioctl_defs.h 403826 2013-05-22 16:40:55Z $
+ */
+
+
+#ifndef wlioctl_defs_h
+#define wlioctl_defs_h
+
+
+
+
+
+/* All builds use the new 11ac ratespec/chanspec */
+#undef  D11AC_IOTYPES
+#define D11AC_IOTYPES
+
+/* WL_RSPEC defines for rate information */
+#define WL_RSPEC_RATE_MASK      0x000000FF      /* rate or HT MCS value */
+#define WL_RSPEC_VHT_MCS_MASK   0x0000000F      /* VHT MCS value */
+#define WL_RSPEC_VHT_NSS_MASK   0x000000F0      /* VHT Nss value */
+#define WL_RSPEC_VHT_NSS_SHIFT  4               /* VHT Nss value shift */
+#define WL_RSPEC_TXEXP_MASK     0x00000300
+#define WL_RSPEC_TXEXP_SHIFT    8
+#define WL_RSPEC_BW_MASK        0x00070000      /* bandwidth mask */
+#define WL_RSPEC_BW_SHIFT       16              /* bandwidth shift */
+#define WL_RSPEC_STBC           0x00100000      /* STBC encoding, Nsts = 2 x Nss */
+#define WL_RSPEC_TXBF           0x00200000      /* bit indicates TXBF mode */
+#define WL_RSPEC_LDPC           0x00400000      /* bit indicates adv coding in use */
+#define WL_RSPEC_SGI            0x00800000      /* Short GI mode */
+#define WL_RSPEC_ENCODING_MASK  0x03000000      /* Encoding of Rate/MCS field */
+#define WL_RSPEC_OVERRIDE_RATE  0x40000000      /* bit indicate to override mcs only */
+#define WL_RSPEC_OVERRIDE_MODE  0x80000000      /* bit indicates override both rate & mode */
+
+/* WL_RSPEC_ENCODING field defs */
+#define WL_RSPEC_ENCODE_RATE    0x00000000      /* Legacy rate is stored in RSPEC_RATE_MASK */
+#define WL_RSPEC_ENCODE_HT      0x01000000      /* HT MCS is stored in RSPEC_RATE_MASK */
+#define WL_RSPEC_ENCODE_VHT     0x02000000      /* VHT MCS and Nss is stored in RSPEC_RATE_MASK */
+
+/* WL_RSPEC_BW field defs */
+#define WL_RSPEC_BW_UNSPECIFIED 0
+#define WL_RSPEC_BW_20MHZ       0x00010000
+#define WL_RSPEC_BW_40MHZ       0x00020000
+#define WL_RSPEC_BW_80MHZ       0x00030000
+#define WL_RSPEC_BW_160MHZ      0x00040000
+
+/* Legacy defines for the nrate iovar */
+#define OLD_NRATE_MCS_INUSE         0x00000080 /* MSC in use,indicates b0-6 holds an mcs */
+#define OLD_NRATE_RATE_MASK         0x0000007f /* rate/mcs value */
+#define OLD_NRATE_STF_MASK          0x0000ff00 /* stf mode mask: siso, cdd, stbc, sdm */
+#define OLD_NRATE_STF_SHIFT         8          /* stf mode shift */
+#define OLD_NRATE_OVERRIDE          0x80000000 /* bit indicates override both rate & mode */
+#define OLD_NRATE_OVERRIDE_MCS_ONLY 0x40000000 /* bit indicate to override mcs only */
+#define OLD_NRATE_SGI               0x00800000 /* sgi mode */
+#define OLD_NRATE_LDPC_CODING       0x00400000 /* bit indicates adv coding in use */
+
+#define OLD_NRATE_STF_SISO	0		/* stf mode SISO */
+#define OLD_NRATE_STF_CDD	1		/* stf mode CDD */
+#define OLD_NRATE_STF_STBC	2		/* stf mode STBC */
+#define OLD_NRATE_STF_SDM	3		/* stf mode SDM */
+
+#define HIGHEST_SINGLE_STREAM_MCS	7 /* MCS values greater than this enable multiple streams */
+
+#define MAX_CCA_CHANNELS 38	/* Max number of 20 Mhz wide channels */
+#define MAX_CCA_SECS	60	/* CCA keeps this many seconds history */
+
+#define IBSS_MED        15	/* Mediom in-bss congestion percentage */
+#define IBSS_HI         25	/* Hi in-bss congestion percentage */
+#define OBSS_MED        12
+#define OBSS_HI         25
+#define INTERFER_MED    5
+#define INTERFER_HI     10
+
+#define  CCA_FLAG_2G_ONLY		0x01	/* Return a channel from 2.4 Ghz band */
+#define  CCA_FLAG_5G_ONLY		0x02	/* Return a channel from 2.4 Ghz band */
+#define  CCA_FLAG_IGNORE_DURATION	0x04	/* Ignore dwell time for each channel */
+#define  CCA_FLAGS_PREFER_1_6_11	0x10
+#define  CCA_FLAG_IGNORE_INTERFER 	0x20 /* do not exlude channel based on interfer level */
+
+#define CCA_ERRNO_BAND 		1	/* After filtering for band pref, no choices left */
+#define CCA_ERRNO_DURATION	2	/* After filtering for duration, no choices left */
+#define CCA_ERRNO_PREF_CHAN	3	/* After filtering for chan pref, no choices left */
+#define CCA_ERRNO_INTERFER	4	/* After filtering for interference, no choices left */
+#define CCA_ERRNO_TOO_FEW	5	/* Only 1 channel was input */
+
+#define WL_STA_AID(a)		((a) &~ 0xc000)
+
+/* Flags for sta_info_t indicating properties of STA */
+#define WL_STA_BRCM		0x00000001	/* Running a Broadcom driver */
+#define WL_STA_WME		0x00000002	/* WMM association */
+#define WL_STA_NONERP		0x00000004	/* No ERP */
+#define WL_STA_AUTHE		0x00000008	/* Authenticated */
+#define WL_STA_ASSOC		0x00000010	/* Associated */
+#define WL_STA_AUTHO		0x00000020	/* Authorized */
+#define WL_STA_WDS		0x00000040	/* Wireless Distribution System */
+#define WL_STA_WDS_LINKUP	0x00000080	/* WDS traffic/probes flowing properly */
+#define WL_STA_PS		0x00000100	/* STA is in power save mode from AP's viewpoint */
+#define WL_STA_APSD_BE		0x00000200	/* APSD delv/trigger for AC_BE is default enabled */
+#define WL_STA_APSD_BK		0x00000400	/* APSD delv/trigger for AC_BK is default enabled */
+#define WL_STA_APSD_VI		0x00000800	/* APSD delv/trigger for AC_VI is default enabled */
+#define WL_STA_APSD_VO		0x00001000	/* APSD delv/trigger for AC_VO is default enabled */
+#define WL_STA_N_CAP		0x00002000	/* STA 802.11n capable */
+#define WL_STA_SCBSTATS		0x00004000	/* Per STA debug stats */
+#define WL_STA_AMPDU_CAP	0x00008000	/* STA AMPDU capable */
+#define WL_STA_AMSDU_CAP	0x00010000	/* STA AMSDU capable */
+#define WL_STA_MIMO_PS		0x00020000	/* mimo ps mode is enabled */
+#define WL_STA_MIMO_RTS		0x00040000	/* send rts in mimo ps mode */
+#define WL_STA_RIFS_CAP		0x00080000	/* rifs enabled */
+#define WL_STA_VHT_CAP		0x00100000	/* STA VHT(11ac) capable */
+#define WL_STA_WPS		0x00200000	/* WPS state */
+
+#define WL_WDS_LINKUP		WL_STA_WDS_LINKUP	/* deprecated */
+
+/* STA HT cap fields */
+#define WL_STA_CAP_LDPC_CODING		0x0001	/* Support for rx of LDPC coded pkts */
+#define WL_STA_CAP_40MHZ		0x0002  /* FALSE:20Mhz, TRUE:20/40MHZ supported */
+#define WL_STA_CAP_MIMO_PS_MASK		0x000C  /* Mimo PS mask */
+#define WL_STA_CAP_MIMO_PS_SHIFT	0x0002	/* Mimo PS shift */
+#define WL_STA_CAP_MIMO_PS_OFF		0x0003	/* Mimo PS, no restriction */
+#define WL_STA_CAP_MIMO_PS_RTS		0x0001	/* Mimo PS, send RTS/CTS around MIMO frames */
+#define WL_STA_CAP_MIMO_PS_ON		0x0000	/* Mimo PS, MIMO disallowed */
+#define WL_STA_CAP_GF			0x0010	/* Greenfield preamble support */
+#define WL_STA_CAP_SHORT_GI_20		0x0020	/* 20MHZ short guard interval support */
+#define WL_STA_CAP_SHORT_GI_40		0x0040	/* 40Mhz short guard interval support */
+#define WL_STA_CAP_TX_STBC		0x0080	/* Tx STBC support */
+#define WL_STA_CAP_RX_STBC_MASK		0x0300	/* Rx STBC mask */
+#define WL_STA_CAP_RX_STBC_SHIFT	8	/* Rx STBC shift */
+#define WL_STA_CAP_DELAYED_BA		0x0400	/* delayed BA support */
+#define WL_STA_CAP_MAX_AMSDU		0x0800	/* Max AMSDU size in bytes , 0=3839, 1=7935 */
+#define WL_STA_CAP_DSSS_CCK		0x1000	/* DSSS/CCK supported by the BSS */
+#define WL_STA_CAP_PSMP			0x2000	/* Power Save Multi Poll support */
+#define WL_STA_CAP_40MHZ_INTOLERANT	0x4000	/* 40MHz Intolerant */
+#define WL_STA_CAP_LSIG_TXOP		0x8000	/* L-SIG TXOP protection support */
+
+#define WL_STA_CAP_RX_STBC_NO		0x0	/* no rx STBC support */
+#define WL_STA_CAP_RX_STBC_ONE_STREAM	0x1	/* rx STBC support of 1 spatial stream */
+#define WL_STA_CAP_RX_STBC_TWO_STREAM	0x2	/* rx STBC support of 1-2 spatial streams */
+#define WL_STA_CAP_RX_STBC_THREE_STREAM	0x3	/* rx STBC support of 1-3 spatial streams */
+
+/* scb vht flags */
+#define WL_STA_VHT_LDPCCAP	0x0001
+#define WL_STA_SGI80		0x0002
+#define WL_STA_SGI160		0x0004
+#define WL_STA_VHT_TX_STBCCAP	0x0008
+#define WL_STA_VHT_RX_STBCCAP	0x0010
+#define WL_STA_SU_BEAMFORMER	0x0020
+#define WL_STA_SU_BEAMFORMEE	0x0040
+#define WL_STA_MU_BEAMFORMER	0x0080
+#define WL_STA_MU_BEAMFORMEE	0x0100
+#define WL_STA_VHT_TXOP_PS	0x0200
+#define WL_STA_HTC_VHT_CAP	0x0400
+
+/* Values for TX Filter override mode */
+#define WLC_TXFILTER_OVERRIDE_DISABLED  0
+#define WLC_TXFILTER_OVERRIDE_ENABLED   1
+
+#define WL_IOCTL_ACTION_GET				0x0
+#define WL_IOCTL_ACTION_SET				0x1
+#define WL_IOCTL_ACTION_OVL_IDX_MASK	0x1e
+#define WL_IOCTL_ACTION_OVL_RSV			0x20
+#define WL_IOCTL_ACTION_OVL				0x40
+#define WL_IOCTL_ACTION_MASK			0x7e
+#define WL_IOCTL_ACTION_OVL_SHIFT		1
+
+#define WL_BSSTYPE_INFRA 1
+#define WL_BSSTYPE_INDEP 0
+#define WL_BSSTYPE_ANY   2
+
+/* Bitmask for scan_type */
+#define WL_SCANFLAGS_PASSIVE	0x01	/* force passive scan */
+#define WL_SCANFLAGS_RESERVED	0x02	/* Reserved */
+#define WL_SCANFLAGS_PROHIBITED	0x04	/* allow scanning prohibited channels */
+#define WL_SCANFLAGS_OFFCHAN	0x08	/* allow scanning/reporting off-channel APs */
+#define WL_SCANFLAGS_HOTSPOT	0x10	/* automatic ANQP to hotspot APs */
+
+/* wl_iscan_results status values */
+#define WL_SCAN_RESULTS_SUCCESS	0
+#define WL_SCAN_RESULTS_PARTIAL	1
+#define WL_SCAN_RESULTS_PENDING	2
+#define WL_SCAN_RESULTS_ABORTED	3
+#define WL_SCAN_RESULTS_NO_MEM  4
+
+#define SCANOL_ENABLED			(1 << 0)
+#define SCANOL_BCAST_SSID		(1 << 1)
+#define SCANOL_NOTIFY_BCAST_SSID	(1 << 2)
+#define SCANOL_RESULTS_PER_CYCLE	(1 << 3)
+
+/* scan times in milliseconds */
+#define SCANOL_HOME_TIME		45	/* for home channel processing */
+#define SCANOL_ASSOC_TIME		20	/* dwell on a channel while associated */
+#define SCANOL_UNASSOC_TIME		40	/* dwell on a channel while unassociated */
+#define SCANOL_PASSIVE_TIME		110	/* listen on a channelfor passive scan */
+#define SCANOL_AWAY_LIMIT		100	/* max time to be away from home channel */
+#define SCANOL_IDLE_REST_TIME		40
+#define SCANOL_IDLE_REST_MULTIPLIER	0
+#define SCANOL_ACTIVE_REST_TIME		20
+#define SCANOL_ACTIVE_REST_MULTIPLIER	0
+#define SCANOL_CYCLE_IDLE_REST_TIME	300000	/* Idle Rest Time between Scan Cycle (msec) */
+#define SCANOL_CYCLE_IDLE_REST_MULTIPLIER	0	/* Idle Rest Time Multiplier */
+#define SCANOL_CYCLE_ACTIVE_REST_TIME	200
+#define SCANOL_CYCLE_ACTIVE_REST_MULTIPLIER	0
+#define SCANOL_MAX_REST_TIME		3600000	/* max rest time between scan cycle (msec) */
+#define SCANOL_CYCLE_DEFAULT		0	/* default for Max Scan Cycle, 0 = forever */
+#define SCANOL_CYCLE_MAX		864000	/* Max Scan Cycle */
+						/* 10 sec/scan cycle => 100 days */
+#define SCANOL_NPROBES			2	/* for Active scan; send n probes on each channel */
+#define SCANOL_NPROBES_MAX		5	/* for Active scan; send n probes on each channel */
+#define SCANOL_SCAN_START_DLY		10	/* delay start of offload scan (sec) */
+#define SCANOL_SCAN_START_DLY_MAX	240	/* delay start of offload scan (sec) */
+#define SCANOL_MULTIPLIER_MAX		10	/* Max Multiplier */
+#define SCANOL_UNASSOC_TIME_MAX		100	/* max dwell on a channel while unassociated */
+#define SCANOL_PASSIVE_TIME_MAX		500	/* max listen on a channel for passive scan */
+#define SCANOL_SSID_MAX			16	/* max supported preferred SSID */
+
+/* masks for channel and ssid count */
+#define WL_SCAN_PARAMS_COUNT_MASK 0x0000ffff
+#define WL_SCAN_PARAMS_NSSID_SHIFT 16
+
+#define WL_SCAN_ACTION_START      1
+#define WL_SCAN_ACTION_CONTINUE   2
+#define WL_SCAN_ACTION_ABORT      3
+
+#if defined(SIMPLE_ISCAN)
+#define ISCAN_RETRY_CNT   5
+#define ISCAN_STATE_IDLE   0
+#define ISCAN_STATE_SCANING 1
+#define ISCAN_STATE_PENDING 2
+#endif /* SIMPLE_ISCAN */
+
+#define ANTENNA_NUM_1	1		/* total number of antennas to be used */
+#define ANTENNA_NUM_2	2
+#define ANTENNA_NUM_3	3
+#define ANTENNA_NUM_4	4
+
+#define ANT_SELCFG_AUTO		0x80	/* bit indicates antenna sel AUTO */
+#define ANT_SELCFG_MASK		0x33	/* antenna configuration mask */
+#define ANT_SELCFG_TX_UNICAST	0	/* unicast tx antenna configuration */
+#define ANT_SELCFG_RX_UNICAST	1	/* unicast rx antenna configuration */
+#define ANT_SELCFG_TX_DEF	2	/* default tx antenna configuration */
+#define ANT_SELCFG_RX_DEF	3	/* default rx antenna configuration */
+
+/* interference source detection and identification mode */
+#define ITFR_MODE_DISABLE	0	/* disable feature */
+#define ITFR_MODE_MANUAL_ENABLE	1	/* enable manual detection */
+#define ITFR_MODE_AUTO_ENABLE	2	/* enable auto detection */
+
+/* bit definitions for flags in interference source report */
+#define ITFR_INTERFERENCED	1	/* interference detected */
+#define ITFR_HOME_CHANNEL	2	/* home channel has interference */
+#define ITFR_NOISY_ENVIRONMENT	4	/* noisy environemnt so feature stopped */
+
+#define WL_NUM_RPI_BINS		8
+#define WL_RM_TYPE_BASIC	1
+#define WL_RM_TYPE_CCA		2
+#define WL_RM_TYPE_RPI		3
+
+#define WL_RM_FLAG_PARALLEL	(1<<0)
+
+#define WL_RM_FLAG_LATE		(1<<1)
+#define WL_RM_FLAG_INCAPABLE	(1<<2)
+#define WL_RM_FLAG_REFUSED	(1<<3)
+
+/* flags */
+#define WLC_ASSOC_REQ_IS_REASSOC 0x01 /* assoc req was actually a reassoc */
+
+#define WLC_CIS_DEFAULT	0	/* built-in default */
+#define WLC_CIS_SROM	1	/* source is sprom */
+#define WLC_CIS_OTP	2	/* source is otp */
+
+/* PCL - Power Control Loop */
+/* current gain setting is replaced by user input */
+#define WL_ATTEN_APP_INPUT_PCL_OFF	0	/* turn off PCL, apply supplied input */
+#define WL_ATTEN_PCL_ON			1	/* turn on PCL */
+/* current gain setting is maintained */
+#define WL_ATTEN_PCL_OFF		2	/* turn off PCL. */
+
+#define	PLC_CMD_FAILOVER	1
+#define	PLC_CMD_MAC_COST	2
+#define	PLC_CMD_LINK_COST	3
+#define	PLC_CMD_NODE_LIST	4
+
+#define NODE_TYPE_UNKNOWN	0	/* Unknown link */
+#define NODE_TYPE_WIFI_ONLY	1	/* Pure Wireless STA node */
+#define NODE_TYPE_PLC_ONLY	2	/* Pure PLC only node */
+#define NODE_TYPE_WIFI_PLC	3	/* WiFi PLC capable node */
+
+/* defines used by poweridx iovar - it controls power in a-band */
+/* current gain setting is maintained */
+#define WL_PWRIDX_PCL_OFF	-2	/* turn off PCL.  */
+#define WL_PWRIDX_PCL_ON	-1	/* turn on PCL */
+#define WL_PWRIDX_LOWER_LIMIT	-2	/* lower limit */
+#define WL_PWRIDX_UPPER_LIMIT	63	/* upper limit */
+/* value >= 0 causes
+ *	- input to be set to that value
+ *	- PCL to be off
+ */
+
+#define BCM_MAC_STATUS_INDICATION	(0x40010200L)
+
+/* Values for TX Filter override mode */
+#define WLC_TXFILTER_OVERRIDE_DISABLED  0
+#define WLC_TXFILTER_OVERRIDE_ENABLED   1
+
+/* magic pattern used for mismatch driver and wl */
+#define WL_TXFIFO_SZ_MAGIC	0xa5a5
+
+/* check this magic number */
+#define WLC_IOCTL_MAGIC		0x14e46c77
+
+/* bss_info_cap_t flags */
+#define WL_BSS_FLAGS_FROM_BEACON	0x01	/* bss_info derived from beacon */
+#define WL_BSS_FLAGS_FROM_CACHE		0x02	/* bss_info collected from cache */
+#define WL_BSS_FLAGS_RSSI_ONCHANNEL	0x04	/* rssi info received on channel (vs offchannel) */
+#define WL_BSS_FLAGS_HS20		0x08	/* hotspot 2.0 capable */
+#define WL_BSS_FLAGS_RSSI_INVALID	0x10	/* BSS contains invalid RSSI */
+#define WL_BSS_FLAGS_RSSI_INACCURATE	0x20	/* BSS contains inaccurate RSSI */
+
+/* bssinfo flag for nbss_cap */
+#define VHT_BI_SGI_80MHZ			0x00000100
+#define VHT_BI_80MHZ			    0x00000200
+#define VHT_BI_160MHZ			    0x00000400
+#define VHT_BI_8080MHZ			    0x00000800
+
+/* reference to wl_ioctl_t struct used by usermode driver */
+#define ioctl_subtype	set		/* subtype param */
+#define ioctl_pid	used		/* pid param */
+#define ioctl_status	needed		/* status param */
+
+
+/* Enumerate crypto algorithms */
+#define	CRYPTO_ALGO_OFF			0
+#define	CRYPTO_ALGO_WEP1		1
+#define	CRYPTO_ALGO_TKIP		2
+#define	CRYPTO_ALGO_WEP128		3
+#define CRYPTO_ALGO_AES_CCM		4
+#define CRYPTO_ALGO_AES_OCB_MSDU	5
+#define CRYPTO_ALGO_AES_OCB_MPDU	6
+#if !defined(BCMCCX) && !defined(BCMEXTCCX)
+#define CRYPTO_ALGO_NALG		7
+#else
+#define CRYPTO_ALGO_CKIP		7
+#define CRYPTO_ALGO_CKIP_MMH	8
+#define CRYPTO_ALGO_WEP_MMH		9
+#define CRYPTO_ALGO_NALG		10
+#endif /* !BCMCCX && !BCMEXTCCX */
+
+#define CRYPTO_ALGO_SMS4		11
+#define CRYPTO_ALGO_PMK			12	/* for 802.1x supp to set PMK before 4-way */
+#define CRYPTO_ALGO_BIP			13  /* 802.11w BIP (aes cmac) */
+
+#define CRYPTO_ALGO_AES_GCM     14  /* 128 bit GCM */
+#define CRYPTO_ALGO_AES_CCM256  15  /* 256 bit CCM */
+#define CRYPTO_ALGO_AES_GCM256  16  /* 256 bit GCM */
+#define CRYPTO_ALGO_BIP_CMAC256 17  /* 256 bit BIP CMAC */
+#define CRYPTO_ALGO_BIP_GMAC    18  /* 128 bit BIP GMAC */
+#define CRYPTO_ALGO_BIP_GMAC256 19  /* 256 bit BIP GMAC */
+
+#define CRYPTO_ALGO_NONE        CRYPTO_ALGO_OFF
+
+#define WSEC_GEN_MIC_ERROR	0x0001
+#define WSEC_GEN_REPLAY		0x0002
+#define WSEC_GEN_ICV_ERROR	0x0004
+#define WSEC_GEN_MFP_ACT_ERROR	0x0008
+#define WSEC_GEN_MFP_DISASSOC_ERROR	0x0010
+#define WSEC_GEN_MFP_DEAUTH_ERROR	0x0020
+
+#define WL_SOFT_KEY	(1 << 0)	/* Indicates this key is using soft encrypt */
+#define WL_PRIMARY_KEY	(1 << 1)	/* Indicates this key is the primary (ie tx) key */
+#if defined(BCMCCX) || defined(BCMEXTCCX)
+#define WL_CKIP_KP	(1 << 4)	/* CMIC */
+#define WL_CKIP_MMH	(1 << 5)	/* CKIP */
+#else
+#define WL_KF_RES_4	(1 << 4)	/* Reserved for backward compat */
+#define WL_KF_RES_5	(1 << 5)	/* Reserved for backward compat */
+#endif /* BCMCCX || BCMEXTCCX */
+#define WL_IBSS_PEER_GROUP_KEY	(1 << 6)	/* Indicates a group key for a IBSS PEER */
+
+/* wireless security bitvec */
+#define WEP_ENABLED		0x0001
+#define TKIP_ENABLED		0x0002
+#define AES_ENABLED		0x0004
+#define WSEC_SWFLAG		0x0008
+#ifdef BCMCCX
+#define CKIP_KP_ENABLED		0x0010
+#define CKIP_MIC_ENABLED	0x0020
+#endif /* BCMCCX */
+#define SES_OW_ENABLED		0x0040	/* to go into transition mode without setting wep */
+#ifdef BCMWAPI_WPI
+#define SMS4_ENABLED		0x0100
+#endif /* BCMWAPI_WPI */
+
+/* wsec macros for operating on the above definitions */
+#define WSEC_WEP_ENABLED(wsec)	((wsec) & WEP_ENABLED)
+#define WSEC_TKIP_ENABLED(wsec)	((wsec) & TKIP_ENABLED)
+#define WSEC_AES_ENABLED(wsec)	((wsec) & AES_ENABLED)
+
+#ifdef BCMCCX
+#define WSEC_CKIP_KP_ENABLED(wsec)	((wsec) & CKIP_KP_ENABLED)
+#define WSEC_CKIP_MIC_ENABLED(wsec)	((wsec) & CKIP_MIC_ENABLED)
+#define WSEC_CKIP_ENABLED(wsec)	((wsec) & (CKIP_KP_ENABLED|CKIP_MIC_ENABLED))
+
+#ifdef BCMWAPI_WPI
+#define WSEC_ENABLED(wsec) \
+	((wsec) & (WEP_ENABLED | TKIP_ENABLED | AES_ENABLED | CKIP_KP_ENABLED |	\
+	  CKIP_MIC_ENABLED | SMS4_ENABLED))
+#else /* BCMWAPI_WPI */
+#define WSEC_ENABLED(wsec) \
+		((wsec) & \
+		 (WEP_ENABLED | TKIP_ENABLED | AES_ENABLED | CKIP_KP_ENABLED | CKIP_MIC_ENABLED))
+#endif /* BCMWAPI_WPI */
+#else /* defined BCMCCX */
+#ifdef BCMWAPI_WPI
+#define WSEC_ENABLED(wsec)	((wsec) & (WEP_ENABLED | TKIP_ENABLED | AES_ENABLED | SMS4_ENABLED))
+#else /* BCMWAPI_WPI */
+#define WSEC_ENABLED(wsec)	((wsec) & (WEP_ENABLED | TKIP_ENABLED | AES_ENABLED))
+#endif /* BCMWAPI_WPI */
+#endif /* BCMCCX */
+#define WSEC_SES_OW_ENABLED(wsec)	((wsec) & SES_OW_ENABLED)
+#ifdef BCMWAPI_WAI
+#define WSEC_SMS4_ENABLED(wsec)	((wsec) & SMS4_ENABLED)
+#endif /* BCMWAPI_WAI */
+
+#define MFP_CAPABLE		0x0200
+#define MFP_REQUIRED	0x0400
+#define MFP_SHA256		0x0800 /* a special configuration for STA for WIFI test tool */
+
+/* WPA authentication mode bitvec */
+#define WPA_AUTH_DISABLED	0x0000	/* Legacy (i.e., non-WPA) */
+#define WPA_AUTH_NONE		0x0001	/* none (IBSS) */
+#define WPA_AUTH_UNSPECIFIED	0x0002	/* over 802.1x */
+#define WPA_AUTH_PSK		0x0004	/* Pre-shared key */
+#if defined(BCMCCX) || defined(BCMEXTCCX)
+#define WPA_AUTH_CCKM		0x0008	/* CCKM */
+#define WPA2_AUTH_CCKM		0x0010	/* CCKM2 */
+#endif	/* BCMCCX || BCMEXTCCX */
+/* #define WPA_AUTH_8021X 0x0020 */	/* 802.1x, reserved */
+#define WPA2_AUTH_UNSPECIFIED	0x0040	/* over 802.1x */
+#define WPA2_AUTH_PSK		0x0080	/* Pre-shared key */
+#define BRCM_AUTH_PSK           0x0100  /* BRCM specific PSK */
+#define BRCM_AUTH_DPT		0x0200	/* DPT PSK without group keys */
+#if defined(BCMWAPI_WAI) || defined(BCMWAPI_WPI)
+#define WPA_AUTH_WAPI           0x0400
+#define WAPI_AUTH_NONE		WPA_AUTH_NONE	/* none (IBSS) */
+#define WAPI_AUTH_UNSPECIFIED	0x0400	/* over AS */
+#define WAPI_AUTH_PSK		0x0800	/* Pre-shared key */
+#endif /* BCMWAPI_WAI || BCMWAPI_WPI */
+#define WPA2_AUTH_MFP           0x1000  /* MFP (11w) in contrast to CCX */
+#define WPA2_AUTH_TPK		0x2000 	/* TDLS Peer Key */
+#define WPA2_AUTH_FT		0x4000 	/* Fast Transition. */
+#define WPA_AUTH_PFN_ANY	0xffffffff	/* for PFN, match only ssid */
+
+/* pmkid */
+#define	MAXPMKID		16
+
+#define	WLC_IOCTL_MAXLEN		8192	/* max length ioctl buffer required */
+#define	WLC_IOCTL_SMLEN			256	/* "small" length ioctl buffer required */
+#define WLC_IOCTL_MEDLEN		1536    /* "med" length ioctl buffer required */
+#if defined(LCNCONF) || defined(LCN40CONF)
+#define WLC_SAMPLECOLLECT_MAXLEN	8192	/* Max Sample Collect buffer */
+#else
+#define WLC_SAMPLECOLLECT_MAXLEN	10240	/* Max Sample Collect buffer for two cores */
+#endif
+#define WLC_SAMPLECOLLECT_MAXLEN_LCN40  8192
+
+/* common ioctl definitions */
+#define WLC_GET_MAGIC				0
+#define WLC_GET_VERSION				1
+#define WLC_UP					2
+#define WLC_DOWN				3
+#define WLC_GET_LOOP				4
+#define WLC_SET_LOOP				5
+#define WLC_DUMP				6
+#define WLC_GET_MSGLEVEL			7
+#define WLC_SET_MSGLEVEL			8
+#define WLC_GET_PROMISC				9
+#define WLC_SET_PROMISC				10
+/* #define WLC_OVERLAY_IOCTL			11 */ /* not supported */
+#define WLC_GET_RATE				12
+#define WLC_GET_MAX_RATE			13
+#define WLC_GET_INSTANCE			14
+/* #define WLC_GET_FRAG				15 */ /* no longer supported */
+/* #define WLC_SET_FRAG				16 */ /* no longer supported */
+/* #define WLC_GET_RTS				17 */ /* no longer supported */
+/* #define WLC_SET_RTS				18 */ /* no longer supported */
+#define WLC_GET_INFRA				19
+#define WLC_SET_INFRA				20
+#define WLC_GET_AUTH				21
+#define WLC_SET_AUTH				22
+#define WLC_GET_BSSID				23
+#define WLC_SET_BSSID				24
+#define WLC_GET_SSID				25
+#define WLC_SET_SSID				26
+#define WLC_RESTART				27
+#define WLC_TERMINATED				28
+/* #define WLC_DUMP_SCB				28 */ /* no longer supported */
+#define WLC_GET_CHANNEL				29
+#define WLC_SET_CHANNEL				30
+#define WLC_GET_SRL				31
+#define WLC_SET_SRL				32
+#define WLC_GET_LRL				33
+#define WLC_SET_LRL				34
+#define WLC_GET_PLCPHDR				35
+#define WLC_SET_PLCPHDR				36
+#define WLC_GET_RADIO				37
+#define WLC_SET_RADIO				38
+#define WLC_GET_PHYTYPE				39
+#define WLC_DUMP_RATE				40
+#define WLC_SET_RATE_PARAMS			41
+#define WLC_GET_FIXRATE				42
+#define WLC_SET_FIXRATE				43
+/* #define WLC_GET_WEP				42 */ /* no longer supported */
+/* #define WLC_SET_WEP				43 */ /* no longer supported */
+#define WLC_GET_KEY				44
+#define WLC_SET_KEY				45
+#define WLC_GET_REGULATORY			46
+#define WLC_SET_REGULATORY			47
+#define WLC_GET_PASSIVE_SCAN			48
+#define WLC_SET_PASSIVE_SCAN			49
+#define WLC_SCAN				50
+#define WLC_SCAN_RESULTS			51
+#define WLC_DISASSOC				52
+#define WLC_REASSOC				53
+#define WLC_GET_ROAM_TRIGGER			54
+#define WLC_SET_ROAM_TRIGGER			55
+#define WLC_GET_ROAM_DELTA			56
+#define WLC_SET_ROAM_DELTA			57
+#define WLC_GET_ROAM_SCAN_PERIOD		58
+#define WLC_SET_ROAM_SCAN_PERIOD		59
+#define WLC_EVM					60	/* diag */
+#define WLC_GET_TXANT				61
+#define WLC_SET_TXANT				62
+#define WLC_GET_ANTDIV				63
+#define WLC_SET_ANTDIV				64
+/* #define WLC_GET_TXPWR			65 */ /* no longer supported */
+/* #define WLC_SET_TXPWR			66 */ /* no longer supported */
+#define WLC_GET_CLOSED				67
+#define WLC_SET_CLOSED				68
+#define WLC_GET_MACLIST				69
+#define WLC_SET_MACLIST				70
+#define WLC_GET_RATESET				71
+#define WLC_SET_RATESET				72
+/* #define WLC_GET_LOCALE			73 */ /* no longer supported */
+#define WLC_LONGTRAIN				74
+#define WLC_GET_BCNPRD				75
+#define WLC_SET_BCNPRD				76
+#define WLC_GET_DTIMPRD				77
+#define WLC_SET_DTIMPRD				78
+#define WLC_GET_SROM				79
+#define WLC_SET_SROM				80
+#define WLC_GET_WEP_RESTRICT			81
+#define WLC_SET_WEP_RESTRICT			82
+#define WLC_GET_COUNTRY				83
+#define WLC_SET_COUNTRY				84
+#define WLC_GET_PM				85
+#define WLC_SET_PM				86
+#define WLC_GET_WAKE				87
+#define WLC_SET_WAKE				88
+/* #define WLC_GET_D11CNTS			89 */ /* -> "counters" iovar */
+#define WLC_GET_FORCELINK			90	/* ndis only */
+#define WLC_SET_FORCELINK			91	/* ndis only */
+#define WLC_FREQ_ACCURACY			92	/* diag */
+#define WLC_CARRIER_SUPPRESS			93	/* diag */
+#define WLC_GET_PHYREG				94
+#define WLC_SET_PHYREG				95
+#define WLC_GET_RADIOREG			96
+#define WLC_SET_RADIOREG			97
+#define WLC_GET_REVINFO				98
+#define WLC_GET_UCANTDIV			99
+#define WLC_SET_UCANTDIV			100
+#define WLC_R_REG				101
+#define WLC_W_REG				102
+/* #define WLC_DIAG_LOOPBACK			103	old tray diag */
+/* #define WLC_RESET_D11CNTS			104 */ /* -> "reset_d11cnts" iovar */
+#define WLC_GET_MACMODE				105
+#define WLC_SET_MACMODE				106
+#define WLC_GET_MONITOR				107
+#define WLC_SET_MONITOR				108
+#define WLC_GET_GMODE				109
+#define WLC_SET_GMODE				110
+#define WLC_GET_LEGACY_ERP			111
+#define WLC_SET_LEGACY_ERP			112
+#define WLC_GET_RX_ANT				113
+#define WLC_GET_CURR_RATESET			114	/* current rateset */
+#define WLC_GET_SCANSUPPRESS			115
+#define WLC_SET_SCANSUPPRESS			116
+#define WLC_GET_AP				117
+#define WLC_SET_AP				118
+#define WLC_GET_EAP_RESTRICT			119
+#define WLC_SET_EAP_RESTRICT			120
+#define WLC_SCB_AUTHORIZE			121
+#define WLC_SCB_DEAUTHORIZE			122
+#define WLC_GET_WDSLIST				123
+#define WLC_SET_WDSLIST				124
+#define WLC_GET_ATIM				125
+#define WLC_SET_ATIM				126
+#define WLC_GET_RSSI				127
+#define WLC_GET_PHYANTDIV			128
+#define WLC_SET_PHYANTDIV			129
+#define WLC_AP_RX_ONLY				130
+#define WLC_GET_TX_PATH_PWR			131
+#define WLC_SET_TX_PATH_PWR			132
+#define WLC_GET_WSEC				133
+#define WLC_SET_WSEC				134
+#define WLC_GET_PHY_NOISE			135
+#define WLC_GET_BSS_INFO			136
+#define WLC_GET_PKTCNTS				137
+#define WLC_GET_LAZYWDS				138
+#define WLC_SET_LAZYWDS				139
+#define WLC_GET_BANDLIST			140
+
+#define WLC_GET_BAND				141
+#define WLC_SET_BAND				142
+#define WLC_SCB_DEAUTHENTICATE			143
+#define WLC_GET_SHORTSLOT			144
+#define WLC_GET_SHORTSLOT_OVERRIDE		145
+#define WLC_SET_SHORTSLOT_OVERRIDE		146
+#define WLC_GET_SHORTSLOT_RESTRICT		147
+#define WLC_SET_SHORTSLOT_RESTRICT		148
+#define WLC_GET_GMODE_PROTECTION		149
+#define WLC_GET_GMODE_PROTECTION_OVERRIDE	150
+#define WLC_SET_GMODE_PROTECTION_OVERRIDE	151
+#define WLC_UPGRADE				152
+/* #define WLC_GET_MRATE			153 */ /* no longer supported */
+/* #define WLC_SET_MRATE			154 */ /* no longer supported */
+#define WLC_GET_IGNORE_BCNS			155
+#define WLC_SET_IGNORE_BCNS			156
+#define WLC_GET_SCB_TIMEOUT			157
+#define WLC_SET_SCB_TIMEOUT			158
+#define WLC_GET_ASSOCLIST			159
+#define WLC_GET_CLK				160
+#define WLC_SET_CLK				161
+#define WLC_GET_UP				162
+#define WLC_OUT					163
+#define WLC_GET_WPA_AUTH			164
+#define WLC_SET_WPA_AUTH			165
+#define WLC_GET_UCFLAGS				166
+#define WLC_SET_UCFLAGS				167
+#define WLC_GET_PWRIDX				168
+#define WLC_SET_PWRIDX				169
+#define WLC_GET_TSSI				170
+#define WLC_GET_SUP_RATESET_OVERRIDE		171
+#define WLC_SET_SUP_RATESET_OVERRIDE		172
+/* #define WLC_SET_FAST_TIMER			173 */ /* no longer supported */
+/* #define WLC_GET_FAST_TIMER			174 */ /* no longer supported */
+/* #define WLC_SET_SLOW_TIMER			175 */ /* no longer supported */
+/* #define WLC_GET_SLOW_TIMER			176 */ /* no longer supported */
+/* #define WLC_DUMP_PHYREGS			177 */ /* no longer supported */
+#define WLC_GET_PROTECTION_CONTROL		178
+#define WLC_SET_PROTECTION_CONTROL		179
+#define WLC_GET_PHYLIST				180
+#define WLC_ENCRYPT_STRENGTH			181	/* ndis only */
+#define WLC_DECRYPT_STATUS			182	/* ndis only */
+#define WLC_GET_KEY_SEQ				183
+#define WLC_GET_SCAN_CHANNEL_TIME		184
+#define WLC_SET_SCAN_CHANNEL_TIME		185
+#define WLC_GET_SCAN_UNASSOC_TIME		186
+#define WLC_SET_SCAN_UNASSOC_TIME		187
+#define WLC_GET_SCAN_HOME_TIME			188
+#define WLC_SET_SCAN_HOME_TIME			189
+#define WLC_GET_SCAN_NPROBES			190
+#define WLC_SET_SCAN_NPROBES			191
+#define WLC_GET_PRB_RESP_TIMEOUT		192
+#define WLC_SET_PRB_RESP_TIMEOUT		193
+#define WLC_GET_ATTEN				194
+#define WLC_SET_ATTEN				195
+#define WLC_GET_SHMEM				196	/* diag */
+#define WLC_SET_SHMEM				197	/* diag */
+/* #define WLC_GET_GMODE_PROTECTION_CTS		198 */ /* no longer supported */
+/* #define WLC_SET_GMODE_PROTECTION_CTS		199 */ /* no longer supported */
+#define WLC_SET_WSEC_TEST			200
+#define WLC_SCB_DEAUTHENTICATE_FOR_REASON	201
+#define WLC_TKIP_COUNTERMEASURES		202
+#define WLC_GET_PIOMODE				203
+#define WLC_SET_PIOMODE				204
+#define WLC_SET_ASSOC_PREFER			205
+#define WLC_GET_ASSOC_PREFER			206
+#define WLC_SET_ROAM_PREFER			207
+#define WLC_GET_ROAM_PREFER			208
+#define WLC_SET_LED				209
+#define WLC_GET_LED				210
+#define WLC_GET_INTERFERENCE_MODE		211
+#define WLC_SET_INTERFERENCE_MODE		212
+#define WLC_GET_CHANNEL_QA			213
+#define WLC_START_CHANNEL_QA			214
+#define WLC_GET_CHANNEL_SEL			215
+#define WLC_START_CHANNEL_SEL			216
+#define WLC_GET_VALID_CHANNELS			217
+#define WLC_GET_FAKEFRAG			218
+#define WLC_SET_FAKEFRAG			219
+#define WLC_GET_PWROUT_PERCENTAGE		220
+#define WLC_SET_PWROUT_PERCENTAGE		221
+#define WLC_SET_BAD_FRAME_PREEMPT		222
+#define WLC_GET_BAD_FRAME_PREEMPT		223
+#define WLC_SET_LEAP_LIST			224
+#define WLC_GET_LEAP_LIST			225
+#define WLC_GET_CWMIN				226
+#define WLC_SET_CWMIN				227
+#define WLC_GET_CWMAX				228
+#define WLC_SET_CWMAX				229
+#define WLC_GET_WET				230
+#define WLC_SET_WET				231
+#define WLC_GET_PUB				232
+/* #define WLC_SET_GLACIAL_TIMER		233 */ /* no longer supported */
+/* #define WLC_GET_GLACIAL_TIMER		234 */ /* no longer supported */
+#define WLC_GET_KEY_PRIMARY			235
+#define WLC_SET_KEY_PRIMARY			236
+
+
+/* #define WLC_DUMP_RADIOREGS			237 */ /* no longer supported */
+#define WLC_GET_ACI_ARGS			238
+#define WLC_SET_ACI_ARGS			239
+#define WLC_UNSET_CALLBACK			240
+#define WLC_SET_CALLBACK			241
+#define WLC_GET_RADAR				242
+#define WLC_SET_RADAR				243
+#define WLC_SET_SPECT_MANAGMENT			244
+#define WLC_GET_SPECT_MANAGMENT			245
+#define WLC_WDS_GET_REMOTE_HWADDR		246	/* handled in wl_linux.c/wl_vx.c */
+#define WLC_WDS_GET_WPA_SUP			247
+#define WLC_SET_CS_SCAN_TIMER			248
+#define WLC_GET_CS_SCAN_TIMER			249
+#define WLC_MEASURE_REQUEST			250
+#define WLC_INIT				251
+#define WLC_SEND_QUIET				252
+#define WLC_KEEPALIVE			253
+#define WLC_SEND_PWR_CONSTRAINT			254
+#define WLC_UPGRADE_STATUS			255
+#define WLC_CURRENT_PWR				256
+#define WLC_GET_SCAN_PASSIVE_TIME		257
+#define WLC_SET_SCAN_PASSIVE_TIME		258
+#define WLC_LEGACY_LINK_BEHAVIOR		259
+#define WLC_GET_CHANNELS_IN_COUNTRY		260
+#define WLC_GET_COUNTRY_LIST			261
+#define WLC_GET_VAR				262	/* get value of named variable */
+#define WLC_SET_VAR				263	/* set named variable to value */
+#define WLC_NVRAM_GET				264	/* deprecated */
+#define WLC_NVRAM_SET				265
+#define WLC_NVRAM_DUMP				266
+#define WLC_REBOOT				267
+#define WLC_SET_WSEC_PMK			268
+#define WLC_GET_AUTH_MODE			269
+#define WLC_SET_AUTH_MODE			270
+#define WLC_GET_WAKEENTRY			271
+#define WLC_SET_WAKEENTRY			272
+#define WLC_NDCONFIG_ITEM			273	/* currently handled in wl_oid.c */
+#define WLC_NVOTPW				274
+#define WLC_OTPW				275
+#define WLC_IOV_BLOCK_GET			276
+#define WLC_IOV_MODULES_GET			277
+#define WLC_SOFT_RESET				278
+#define WLC_GET_ALLOW_MODE			279
+#define WLC_SET_ALLOW_MODE			280
+#define WLC_GET_DESIRED_BSSID			281
+#define WLC_SET_DESIRED_BSSID			282
+#define	WLC_DISASSOC_MYAP			283
+#define WLC_GET_NBANDS				284	/* for Dongle EXT_STA support */
+#define WLC_GET_BANDSTATES			285	/* for Dongle EXT_STA support */
+#define WLC_GET_WLC_BSS_INFO			286	/* for Dongle EXT_STA support */
+#define WLC_GET_ASSOC_INFO			287	/* for Dongle EXT_STA support */
+#define WLC_GET_OID_PHY				288	/* for Dongle EXT_STA support */
+#define WLC_SET_OID_PHY				289	/* for Dongle EXT_STA support */
+#define WLC_SET_ASSOC_TIME			290	/* for Dongle EXT_STA support */
+#define WLC_GET_DESIRED_SSID			291	/* for Dongle EXT_STA support */
+#define WLC_GET_CHANSPEC			292	/* for Dongle EXT_STA support */
+#define WLC_GET_ASSOC_STATE			293	/* for Dongle EXT_STA support */
+#define WLC_SET_PHY_STATE			294	/* for Dongle EXT_STA support */
+#define WLC_GET_SCAN_PENDING			295	/* for Dongle EXT_STA support */
+#define WLC_GET_SCANREQ_PENDING			296	/* for Dongle EXT_STA support */
+#define WLC_GET_PREV_ROAM_REASON		297	/* for Dongle EXT_STA support */
+#define WLC_SET_PREV_ROAM_REASON		298	/* for Dongle EXT_STA support */
+#define WLC_GET_BANDSTATES_PI			299	/* for Dongle EXT_STA support */
+#define WLC_GET_PHY_STATE			300	/* for Dongle EXT_STA support */
+#define WLC_GET_BSS_WPA_RSN			301	/* for Dongle EXT_STA support */
+#define WLC_GET_BSS_WPA2_RSN			302	/* for Dongle EXT_STA support */
+#define WLC_GET_BSS_BCN_TS			303	/* for Dongle EXT_STA support */
+#define WLC_GET_INT_DISASSOC			304	/* for Dongle EXT_STA support */
+#define WLC_SET_NUM_PEERS			305     /* for Dongle EXT_STA support */
+#define WLC_GET_NUM_BSS				306	/* for Dongle EXT_STA support */
+#define WLC_PHY_SAMPLE_COLLECT			307	/* phy sample collect mode */
+/* #define WLC_UM_PRIV				308 */	/* Deprecated: usermode driver */
+#define WLC_GET_CMD				309
+/* #define WLC_LAST				310 */	/* Never used - can be reused */
+#define WLC_SET_INTERFERENCE_OVERRIDE_MODE	311	/* set inter mode override */
+#define WLC_GET_INTERFERENCE_OVERRIDE_MODE	312	/* get inter mode override */
+/* #define WLC_GET_WAI_RESTRICT			313 */	/* for WAPI, deprecated use iovar instead */
+/* #define WLC_SET_WAI_RESTRICT			314 */	/* for WAPI, deprecated use iovar instead */
+/* #define WLC_SET_WAI_REKEY			315 */	/* for WAPI, deprecated use iovar instead */
+#define WLC_SET_NAT_CONFIG			316	/* for configuring NAT filter driver */
+#define WLC_GET_NAT_STATE			317
+#define WLC_GET_TXBF_RATESET			318
+#define WLC_SET_TXBF_RATESET			319
+#define WLC_SCAN_CQ				320
+#define WLC_GET_RSSI_QDB			321 /* qdB portion of the RSSI */
+
+#define WLC_LAST				322
+#ifndef EPICTRL_COOKIE
+#define EPICTRL_COOKIE		0xABADCEDE
+#endif
+
+/* vx wlc ioctl's offset */
+#define CMN_IOCTL_OFF 0x180
+
+/*
+ * custom OID support
+ *
+ * 0xFF - implementation specific OID
+ * 0xE4 - first byte of Broadcom PCI vendor ID
+ * 0x14 - second byte of Broadcom PCI vendor ID
+ * 0xXX - the custom OID number
+ */
+
+/* begin 0x1f values beyond the start of the ET driver range. */
+#define WL_OID_BASE		0xFFE41420
+
+/* NDIS overrides */
+#define OID_WL_GETINSTANCE	(WL_OID_BASE + WLC_GET_INSTANCE)
+#define OID_WL_GET_FORCELINK	(WL_OID_BASE + WLC_GET_FORCELINK)
+#define OID_WL_SET_FORCELINK	(WL_OID_BASE + WLC_SET_FORCELINK)
+#define	OID_WL_ENCRYPT_STRENGTH	(WL_OID_BASE + WLC_ENCRYPT_STRENGTH)
+#define OID_WL_DECRYPT_STATUS	(WL_OID_BASE + WLC_DECRYPT_STATUS)
+#define OID_LEGACY_LINK_BEHAVIOR (WL_OID_BASE + WLC_LEGACY_LINK_BEHAVIOR)
+#define OID_WL_NDCONFIG_ITEM	(WL_OID_BASE + WLC_NDCONFIG_ITEM)
+
+/* EXT_STA Dongle suuport */
+#define OID_STA_CHANSPEC	(WL_OID_BASE + WLC_GET_CHANSPEC)
+#define OID_STA_NBANDS		(WL_OID_BASE + WLC_GET_NBANDS)
+#define OID_STA_GET_PHY		(WL_OID_BASE + WLC_GET_OID_PHY)
+#define OID_STA_SET_PHY		(WL_OID_BASE + WLC_SET_OID_PHY)
+#define OID_STA_ASSOC_TIME	(WL_OID_BASE + WLC_SET_ASSOC_TIME)
+#define OID_STA_DESIRED_SSID	(WL_OID_BASE + WLC_GET_DESIRED_SSID)
+#define OID_STA_SET_PHY_STATE	(WL_OID_BASE + WLC_SET_PHY_STATE)
+#define OID_STA_SCAN_PENDING	(WL_OID_BASE + WLC_GET_SCAN_PENDING)
+#define OID_STA_SCANREQ_PENDING (WL_OID_BASE + WLC_GET_SCANREQ_PENDING)
+#define OID_STA_GET_ROAM_REASON (WL_OID_BASE + WLC_GET_PREV_ROAM_REASON)
+#define OID_STA_SET_ROAM_REASON (WL_OID_BASE + WLC_SET_PREV_ROAM_REASON)
+#define OID_STA_GET_PHY_STATE	(WL_OID_BASE + WLC_GET_PHY_STATE)
+#define OID_STA_INT_DISASSOC	(WL_OID_BASE + WLC_GET_INT_DISASSOC)
+#define OID_STA_SET_NUM_PEERS	(WL_OID_BASE + WLC_SET_NUM_PEERS)
+#define OID_STA_GET_NUM_BSS	(WL_OID_BASE + WLC_GET_NUM_BSS)
+
+/* NAT filter driver support */
+#define OID_NAT_SET_CONFIG	(WL_OID_BASE + WLC_SET_NAT_CONFIG)
+#define OID_NAT_GET_STATE	(WL_OID_BASE + WLC_GET_NAT_STATE)
+
+#define WL_DECRYPT_STATUS_SUCCESS	1
+#define WL_DECRYPT_STATUS_FAILURE	2
+#define WL_DECRYPT_STATUS_UNKNOWN	3
+
+/* allows user-mode app to poll the status of USB image upgrade */
+#define WLC_UPGRADE_SUCCESS			0
+#define WLC_UPGRADE_PENDING			1
+
+/* WLC_GET_AUTH, WLC_SET_AUTH values */
+#define WL_AUTH_OPEN_SYSTEM		0	/* d11 open authentication */
+#define WL_AUTH_SHARED_KEY		1	/* d11 shared authentication */
+#define WL_AUTH_OPEN_SHARED		2	/* try open, then shared if open failed w/rc 13 */
+
+/* a large TX Power as an init value to factor out of MIN() calculations,
+ * keep low enough to fit in an int8, units are .25 dBm
+ */
+#define WLC_TXPWR_MAX		(127)	/* ~32 dBm = 1,500 mW */
+
+/* "diag" iovar argument and error code */
+#define WL_DIAG_INTERRUPT			1	/* d11 loopback interrupt test */
+#define WL_DIAG_LOOPBACK			2	/* d11 loopback data test */
+#define WL_DIAG_MEMORY				3	/* d11 memory test */
+#define WL_DIAG_LED				4	/* LED test */
+#define WL_DIAG_REG				5	/* d11/phy register test */
+#define WL_DIAG_SROM				6	/* srom read/crc test */
+#define WL_DIAG_DMA				7	/* DMA test */
+#define WL_DIAG_LOOPBACK_EXT			8	/* enhenced d11 loopback data test */
+
+#define WL_DIAGERR_SUCCESS			0
+#define WL_DIAGERR_FAIL_TO_RUN			1	/* unable to run requested diag */
+#define WL_DIAGERR_NOT_SUPPORTED		2	/* diag requested is not supported */
+#define WL_DIAGERR_INTERRUPT_FAIL		3	/* loopback interrupt test failed */
+#define WL_DIAGERR_LOOPBACK_FAIL		4	/* loopback data test failed */
+#define WL_DIAGERR_SROM_FAIL			5	/* srom read failed */
+#define WL_DIAGERR_SROM_BADCRC			6	/* srom crc failed */
+#define WL_DIAGERR_REG_FAIL			7	/* d11/phy register test failed */
+#define WL_DIAGERR_MEMORY_FAIL			8	/* d11 memory test failed */
+#define WL_DIAGERR_NOMEM			9	/* diag test failed due to no memory */
+#define WL_DIAGERR_DMA_FAIL			10	/* DMA test failed */
+
+#define WL_DIAGERR_MEMORY_TIMEOUT		11	/* d11 memory test didn't finish in time */
+#define WL_DIAGERR_MEMORY_BADPATTERN		12	/* d11 memory test result in bad pattern */
+
+/* band types */
+#define	WLC_BAND_AUTO		0	/* auto-select */
+#define	WLC_BAND_5G		1	/* 5 Ghz */
+#define	WLC_BAND_2G		2	/* 2.4 Ghz */
+#define	WLC_BAND_ALL		3	/* all bands */
+
+/* band range returned by band_range iovar */
+#define WL_CHAN_FREQ_RANGE_2G      0
+#define WL_CHAN_FREQ_RANGE_5GL     1
+#define WL_CHAN_FREQ_RANGE_5GM     2
+#define WL_CHAN_FREQ_RANGE_5GH     3
+
+#define WL_CHAN_FREQ_RANGE_5GLL_5BAND    4
+#define WL_CHAN_FREQ_RANGE_5GLH_5BAND    5
+#define WL_CHAN_FREQ_RANGE_5GML_5BAND    6
+#define WL_CHAN_FREQ_RANGE_5GMH_5BAND    7
+#define WL_CHAN_FREQ_RANGE_5GH_5BAND     8
+
+#define WL_CHAN_FREQ_RANGE_5G_BAND0     1
+#define WL_CHAN_FREQ_RANGE_5G_BAND1     2
+#define WL_CHAN_FREQ_RANGE_5G_BAND2     3
+#define WL_CHAN_FREQ_RANGE_5G_BAND3     4
+
+#define WL_CHAN_FREQ_RANGE_5G_4BAND	5
+
+/* MAC list modes */
+#define WLC_MACMODE_DISABLED	0	/* MAC list disabled */
+#define WLC_MACMODE_DENY	1	/* Deny specified (i.e. allow unspecified) */
+#define WLC_MACMODE_ALLOW	2	/* Allow specified (i.e. deny unspecified) */
+
+/*
+ * 54g modes (basic bits may still be overridden)
+ *
+ * GMODE_LEGACY_B			Rateset: 1b, 2b, 5.5, 11
+ *					Preamble: Long
+ *					Shortslot: Off
+ * GMODE_AUTO				Rateset: 1b, 2b, 5.5b, 11b, 18, 24, 36, 54
+ *					Extended Rateset: 6, 9, 12, 48
+ *					Preamble: Long
+ *					Shortslot: Auto
+ * GMODE_ONLY				Rateset: 1b, 2b, 5.5b, 11b, 18, 24b, 36, 54
+ *					Extended Rateset: 6b, 9, 12b, 48
+ *					Preamble: Short required
+ *					Shortslot: Auto
+ * GMODE_B_DEFERRED			Rateset: 1b, 2b, 5.5b, 11b, 18, 24, 36, 54
+ *					Extended Rateset: 6, 9, 12, 48
+ *					Preamble: Long
+ *					Shortslot: On
+ * GMODE_PERFORMANCE			Rateset: 1b, 2b, 5.5b, 6b, 9, 11b, 12b, 18, 24b, 36, 48, 54
+ *					Preamble: Short required
+ *					Shortslot: On and required
+ * GMODE_LRS				Rateset: 1b, 2b, 5.5b, 11b
+ *					Extended Rateset: 6, 9, 12, 18, 24, 36, 48, 54
+ *					Preamble: Long
+ *					Shortslot: Auto
+ */
+#define GMODE_LEGACY_B		0
+#define GMODE_AUTO		1
+#define GMODE_ONLY		2
+#define GMODE_B_DEFERRED	3
+#define GMODE_PERFORMANCE	4
+#define GMODE_LRS		5
+#define GMODE_MAX		6
+
+/* values for PLCPHdr_override */
+#define WLC_PLCP_AUTO	-1
+#define WLC_PLCP_SHORT	0
+#define WLC_PLCP_LONG	1
+
+/* values for g_protection_override and n_protection_override */
+#define WLC_PROTECTION_AUTO		-1
+#define WLC_PROTECTION_OFF		0
+#define WLC_PROTECTION_ON		1
+#define WLC_PROTECTION_MMHDR_ONLY	2
+#define WLC_PROTECTION_CTS_ONLY		3
+
+/* values for g_protection_control and n_protection_control */
+#define WLC_PROTECTION_CTL_OFF		0
+#define WLC_PROTECTION_CTL_LOCAL	1
+#define WLC_PROTECTION_CTL_OVERLAP	2
+
+/* values for n_protection */
+#define WLC_N_PROTECTION_OFF		0
+#define WLC_N_PROTECTION_OPTIONAL	1
+#define WLC_N_PROTECTION_20IN40		2
+#define WLC_N_PROTECTION_MIXEDMODE	3
+
+/* values for n_preamble_type */
+#define WLC_N_PREAMBLE_MIXEDMODE	0
+#define WLC_N_PREAMBLE_GF		1
+#define WLC_N_PREAMBLE_GF_BRCM          2
+
+/* values for band specific 40MHz capabilities (deprecated) */
+#define WLC_N_BW_20ALL			0
+#define WLC_N_BW_40ALL			1
+#define WLC_N_BW_20IN2G_40IN5G		2
+
+#define WLC_BW_20MHZ_BIT		(1<<0)
+#define WLC_BW_40MHZ_BIT		(1<<1)
+#define WLC_BW_80MHZ_BIT		(1<<2)
+#define WLC_BW_160MHZ_BIT		(1<<3)
+
+/* Bandwidth capabilities */
+#define WLC_BW_CAP_20MHZ		(WLC_BW_20MHZ_BIT)
+#define WLC_BW_CAP_40MHZ		(WLC_BW_40MHZ_BIT|WLC_BW_20MHZ_BIT)
+#define WLC_BW_CAP_80MHZ		(WLC_BW_80MHZ_BIT|WLC_BW_40MHZ_BIT|WLC_BW_20MHZ_BIT)
+#define WLC_BW_CAP_160MHZ		(WLC_BW_160MHZ_BIT|WLC_BW_80MHZ_BIT| \
+	WLC_BW_40MHZ_BIT|WLC_BW_20MHZ_BIT)
+#define WLC_BW_CAP_UNRESTRICTED		0xFF
+
+#define WL_BW_CAP_20MHZ(bw_cap)	(((bw_cap) & WLC_BW_20MHZ_BIT) ? TRUE : FALSE)
+#define WL_BW_CAP_40MHZ(bw_cap)	(((bw_cap) & WLC_BW_40MHZ_BIT) ? TRUE : FALSE)
+#define WL_BW_CAP_80MHZ(bw_cap)	(((bw_cap) & WLC_BW_80MHZ_BIT) ? TRUE : FALSE)
+#define WL_BW_CAP_160MHZ(bw_cap)(((bw_cap) & WLC_BW_160MHZ_BIT) ? TRUE : FALSE)
+
+/* values to force tx/rx chain */
+#define WLC_N_TXRX_CHAIN0		0
+#define WLC_N_TXRX_CHAIN1		1
+
+/* bitflags for SGI support (sgi_rx iovar) */
+#define WLC_N_SGI_20			0x01
+#define WLC_N_SGI_40			0x02
+#define WLC_VHT_SGI_80			0x04
+
+/* when sgi_tx==WLC_SGI_ALL, bypass rate selection, enable sgi for all mcs */
+#define WLC_SGI_ALL				0x02
+
+#define LISTEN_INTERVAL			10
+/* interference mitigation options */
+#define	INTERFERE_OVRRIDE_OFF	-1	/* interference override off */
+#define	INTERFERE_NONE	0	/* off */
+#define	NON_WLAN	1	/* foreign/non 802.11 interference, no auto detect */
+#define	WLAN_MANUAL	2	/* ACI: no auto detection */
+#define	WLAN_AUTO	3	/* ACI: auto detect */
+#define	WLAN_AUTO_W_NOISE	4	/* ACI: auto - detect and non 802.11 interference */
+#define AUTO_ACTIVE	(1 << 7) /* Auto is currently active */
+
+/* interfernece mode bit-masks (ACPHY) */
+#define ACPHY_ACI_GLITCHBASED_DESENSE 1   /* bit 0 */
+#define ACPHY_ACI_HWACI_PKTGAINLMT 2      /* bit 1 */
+#define ACPHY_ACI_W2NB_PKTGAINLMT 4       /* bit 2 */
+#define ACPHY_ACI_PREEMPTION 8            /* bit 3 */
+#define ACPHY_ACI_MAX_MODE 15
+
+/* AP environment */
+#define AP_ENV_DETECT_NOT_USED		0 /* We aren't using AP environment detection */
+#define AP_ENV_DENSE			1 /* "Corporate" or other AP dense environment */
+#define AP_ENV_SPARSE			2 /* "Home" or other sparse environment */
+#define AP_ENV_INDETERMINATE		3 /* AP environment hasn't been identified */
+
+#define TRIGGER_NOW				0
+#define TRIGGER_CRS				0x01
+#define TRIGGER_CRSDEASSERT			0x02
+#define TRIGGER_GOODFCS				0x04
+#define TRIGGER_BADFCS				0x08
+#define TRIGGER_BADPLCP				0x10
+#define TRIGGER_CRSGLITCH			0x20
+
+#define	WL_SAMPLEDATA_HEADER_TYPE	1
+#define WL_SAMPLEDATA_HEADER_SIZE	80	/* sample collect header size (bytes) */
+#define	WL_SAMPLEDATA_TYPE		2
+#define	WL_SAMPLEDATA_SEQ		0xff	/* sequence # */
+#define	WL_SAMPLEDATA_MORE_DATA		0x100	/* more data mask */
+
+/* WL_OTA START */
+#define WL_OTA_ARG_PARSE_BLK_SIZE	1200
+#define WL_OTA_TEST_MAX_NUM_RATE	30
+#define WL_OTA_TEST_MAX_NUM_SEQ		100
+
+#define WL_THRESHOLD_LO_BAND	70	/* range from 5250MHz - 5350MHz */
+
+/* radar iovar SET defines */
+#define WL_RADAR_DETECTOR_OFF		0	/* radar detector off */
+#define WL_RADAR_DETECTOR_ON		1	/* radar detector on */
+#define WL_RADAR_SIMULATED		2	/* force radar detector to declare
+						 * detection once
+						 */
+#define WL_RSSI_ANT_VERSION	1	/* current version of wl_rssi_ant_t */
+#define WL_ANT_RX_MAX		2	/* max 2 receive antennas */
+#define WL_ANT_HT_RX_MAX	3	/* max 3 receive antennas/cores */
+#define WL_ANT_IDX_1		0	/* antenna index 1 */
+#define WL_ANT_IDX_2		1	/* antenna index 2 */
+
+#ifndef WL_RSSI_ANT_MAX
+#define WL_RSSI_ANT_MAX		4	/* max possible rx antennas */
+#elif WL_RSSI_ANT_MAX != 4
+#error "WL_RSSI_ANT_MAX does not match"
+#endif
+
+/* dfs_status iovar-related defines */
+
+/* cac - channel availability check,
+ * ism - in-service monitoring
+ * csa - channel switching announcement
+ */
+
+/* cac state values */
+#define WL_DFS_CACSTATE_IDLE		0	/* state for operating in non-radar channel */
+#define	WL_DFS_CACSTATE_PREISM_CAC	1	/* CAC in progress */
+#define WL_DFS_CACSTATE_ISM		2	/* ISM in progress */
+#define WL_DFS_CACSTATE_CSA		3	/* csa */
+#define WL_DFS_CACSTATE_POSTISM_CAC	4	/* ISM CAC */
+#define WL_DFS_CACSTATE_PREISM_OOC	5	/* PREISM OOC */
+#define WL_DFS_CACSTATE_POSTISM_OOC	6	/* POSTISM OOC */
+#define WL_DFS_CACSTATES		7	/* this many states exist */
+
+/* Defines used with channel_bandwidth for curpower */
+#define WL_BW_20MHZ		0
+#define WL_BW_40MHZ		1
+#define WL_BW_80MHZ		2
+#define WL_BW_160MHZ		3
+
+/* tx_power_t.flags bits */
+#define WL_TX_POWER_F_ENABLED	1
+#define WL_TX_POWER_F_HW		2
+#define WL_TX_POWER_F_MIMO		4
+#define WL_TX_POWER_F_SISO		8
+#define WL_TX_POWER_F_HT		0x10
+#define WL_TX_POWER_F_VHT		0x20
+#define WL_TX_POWER_F_OPENLOOP		0x40
+
+/* Message levels */
+#define WL_ERROR_VAL		0x00000001
+#define WL_TRACE_VAL		0x00000002
+#define WL_PRHDRS_VAL		0x00000004
+#define WL_PRPKT_VAL		0x00000008
+#define WL_INFORM_VAL		0x00000010
+#define WL_TMP_VAL		0x00000020
+#define WL_OID_VAL		0x00000040
+#define WL_RATE_VAL		0x00000080
+#define WL_ASSOC_VAL		0x00000100
+#define WL_PRUSR_VAL		0x00000200
+#define WL_PS_VAL		0x00000400
+#define WL_TXPWR_VAL		0x00000800	/* retired in TOT on 6/10/2009 */
+#define WL_PORT_VAL		0x00001000
+#define WL_DUAL_VAL		0x00002000
+#define WL_WSEC_VAL		0x00004000
+#define WL_WSEC_DUMP_VAL	0x00008000
+#define WL_LOG_VAL		0x00010000
+#define WL_NRSSI_VAL		0x00020000	/* retired in TOT on 6/10/2009 */
+#define WL_LOFT_VAL		0x00040000	/* retired in TOT on 6/10/2009 */
+#define WL_REGULATORY_VAL	0x00080000
+#define WL_PHYCAL_VAL		0x00100000	/* retired in TOT on 6/10/2009 */
+#define WL_RADAR_VAL		0x00200000	/* retired in TOT on 6/10/2009 */
+#define WL_MPC_VAL		0x00400000
+#define WL_APSTA_VAL		0x00800000
+#define WL_DFS_VAL		0x01000000
+#define WL_BA_VAL		0x02000000	/* retired in TOT on 6/14/2010 */
+#define WL_ACI_VAL		0x04000000
+#define WL_MBSS_VAL		0x04000000
+#define WL_CAC_VAL		0x08000000
+#define WL_AMSDU_VAL		0x10000000
+#define WL_AMPDU_VAL		0x20000000
+#define WL_FFPLD_VAL		0x40000000
+
+/* wl_msg_level is full. For new bits take the next one and AND with
+ * wl_msg_level2 in wl_dbg.h
+ */
+#define WL_DPT_VAL		0x00000001
+#define WL_SCAN_VAL		0x00000002
+#define WL_WOWL_VAL		0x00000004
+#define WL_COEX_VAL		0x00000008
+#define WL_RTDC_VAL		0x00000010
+#define WL_PROTO_VAL		0x00000020
+#define WL_BTA_VAL		0x00000040
+#define WL_CHANINT_VAL		0x00000080
+#define WL_WMF_VAL		0x00000100
+#define WL_P2P_VAL		0x00000200
+#define WL_ITFR_VAL		0x00000400
+#define WL_MCHAN_VAL		0x00000800
+#define WL_TDLS_VAL		0x00001000
+#define WL_MCNX_VAL		0x00002000
+#define WL_PROT_VAL		0x00004000
+#define WL_PSTA_VAL		0x00008000
+#define WL_TSO_VAL		0x00010000
+#define WL_TRF_MGMT_VAL		0x00020000
+#define WL_LPC_VAL	        0x00040000
+#define WL_L2FILTER_VAL		0x00080000
+#define WL_TXBF_VAL		0x00100000
+#define WL_P2PO_VAL		0x00200000
+#define WL_TBTT_VAL		0x00400000
+#define WL_NIC_VAL		0x00800000
+#define WL_MQ_VAL		0x01000000
+
+/* This level is currently used in Phoenix2 only */
+#define WL_SRSCAN_VAL		0x02000000
+
+#define WL_WNM_VAL		0x04000000
+#define WL_AWDL_VAL		0x08000000
+#define WL_PWRSEL_VAL		0x10000000
+#define WL_NET_DETECT_VAL	0x20000000
+#define WL_PCIE_VAL		0x40000000
+
+/* use top-bit for WL_TIME_STAMP_VAL because this is a modifier
+ * rather than a message-type of its own
+ */
+#define WL_TIMESTAMP_VAL        0x80000000
+
+/* max # of leds supported by GPIO (gpio pin# == led index#) */
+#define	WL_LED_NUMGPIO		32	/* gpio 0-31 */
+
+/* led per-pin behaviors */
+#define	WL_LED_OFF		0		/* always off */
+#define	WL_LED_ON		1		/* always on */
+#define	WL_LED_ACTIVITY		2		/* activity */
+#define	WL_LED_RADIO		3		/* radio enabled */
+#define	WL_LED_ARADIO		4		/* 5  Ghz radio enabled */
+#define	WL_LED_BRADIO		5		/* 2.4Ghz radio enabled */
+#define	WL_LED_BGMODE		6		/* on if gmode, off if bmode */
+#define	WL_LED_WI1		7
+#define	WL_LED_WI2		8
+#define	WL_LED_WI3		9
+#define	WL_LED_ASSOC		10		/* associated state indicator */
+#define	WL_LED_INACTIVE		11		/* null behavior (clears default behavior) */
+#define	WL_LED_ASSOCACT		12		/* on when associated; blink fast for activity */
+#define WL_LED_WI4		13
+#define WL_LED_WI5		14
+#define	WL_LED_BLINKSLOW	15		/* blink slow */
+#define	WL_LED_BLINKMED		16		/* blink med */
+#define	WL_LED_BLINKFAST	17		/* blink fast */
+#define	WL_LED_BLINKCUSTOM	18		/* blink custom */
+#define	WL_LED_BLINKPERIODIC	19		/* blink periodic (custom 1000ms / off 400ms) */
+#define WL_LED_ASSOC_WITH_SEC	20		/* when connected with security */
+						/* keep on for 300 sec */
+#define WL_LED_START_OFF	21		/* off upon boot, could be turned on later */
+#define WL_LED_WI6		22
+#define WL_LED_WI7		23
+#define WL_LED_WI8		24
+#define	WL_LED_NUMBEHAVIOR	25
+
+/* led behavior numeric value format */
+#define	WL_LED_BEH_MASK		0x7f		/* behavior mask */
+#define	WL_LED_AL_MASK		0x80		/* activelow (polarity) bit */
+
+/* number of bytes needed to define a proper bit mask for MAC event reporting */
+#define BCMIO_ROUNDUP(x, y)	((((x) + ((y) - 1)) / (y)) * (y))
+#define BCMIO_NBBY		8
+#define WL_EVENTING_MASK_LEN	16
+
+
+/* join preference types */
+#define WL_JOIN_PREF_RSSI	1	/* by RSSI */
+#define WL_JOIN_PREF_WPA	2	/* by akm and ciphers */
+#define WL_JOIN_PREF_BAND	3	/* by 802.11 band */
+#define WL_JOIN_PREF_RSSI_DELTA	4	/* by 802.11 band only if RSSI delta condition matches */
+#define WL_JOIN_PREF_TRANS_PREF	5	/* defined by requesting AP */
+
+/* band preference */
+#define WLJP_BAND_ASSOC_PREF	255	/* use what WLC_SET_ASSOC_PREFER ioctl specifies */
+
+/* any multicast cipher suite */
+#define WL_WPA_ACP_MCS_ANY	"\x00\x00\x00\x00"
+
+/* 802.11h measurement types */
+#define WLC_MEASURE_TPC			1
+#define WLC_MEASURE_CHANNEL_BASIC	2
+#define WLC_MEASURE_CHANNEL_CCA		3
+#define WLC_MEASURE_CHANNEL_RPI		4
+
+/* regulatory enforcement levels */
+#define SPECT_MNGMT_OFF			0		/* both 11h and 11d disabled */
+#define SPECT_MNGMT_LOOSE_11H		1		/* allow non-11h APs in scan lists */
+#define SPECT_MNGMT_STRICT_11H		2		/* prune out non-11h APs from scan list */
+#define SPECT_MNGMT_STRICT_11D		3		/* switch to 802.11D mode */
+/* SPECT_MNGMT_LOOSE_11H_D - same as SPECT_MNGMT_LOOSE with the exception that Country IE
+ * adoption is done regardless of capability spectrum_management
+ */
+#define SPECT_MNGMT_LOOSE_11H_D		4		/* operation defined above */
+
+#define WL_CHAN_VALID_HW	(1 << 0)	/* valid with current HW */
+#define WL_CHAN_VALID_SW	(1 << 1)	/* valid with current country setting */
+#define WL_CHAN_BAND_5G		(1 << 2)	/* 5GHz-band channel */
+#define WL_CHAN_RADAR		(1 << 3)	/* radar sensitive  channel */
+#define WL_CHAN_INACTIVE	(1 << 4)	/* temporarily inactive due to radar */
+#define WL_CHAN_PASSIVE		(1 << 5)	/* channel is in passive mode */
+#define WL_CHAN_RESTRICTED	(1 << 6)	/* restricted use channel */
+
+/* BTC mode used by "btc_mode" iovar */
+#define	WL_BTC_DISABLE		0	/* disable BT coexistence */
+#define WL_BTC_FULLTDM      1	/* full TDM COEX */
+#define WL_BTC_ENABLE       1	/* full TDM COEX to maintain backward compatiblity */
+#define WL_BTC_PREMPT      2    /* full TDM COEX with preemption */
+#define WL_BTC_LITE        3	/* light weight coex for large isolation platform */
+#define WL_BTC_PARALLEL		4   /* BT and WLAN run in parallel with separate antenna  */
+#define WL_BTC_HYBRID		5   /* hybrid coex, only ack is allowed to transmit in BT slot */
+#define WL_BTC_DEFAULT		8	/* set the default mode for the device */
+#define WL_INF_BTC_DISABLE      0
+#define WL_INF_BTC_ENABLE       1
+#define WL_INF_BTC_AUTO         3
+
+/* BTC wire used by "btc_wire" iovar */
+#define	WL_BTC_DEFWIRE		0	/* use default wire setting */
+#define WL_BTC_2WIRE		2	/* use 2-wire BTC */
+#define WL_BTC_3WIRE		3	/* use 3-wire BTC */
+#define WL_BTC_4WIRE		4	/* use 4-wire BTC */
+
+/* BTC flags: BTC configuration that can be set by host */
+#define WL_BTC_FLAG_PREMPT               (1 << 0)
+#define WL_BTC_FLAG_BT_DEF               (1 << 1)
+#define WL_BTC_FLAG_ACTIVE_PROT          (1 << 2)
+#define WL_BTC_FLAG_SIM_RSP              (1 << 3)
+#define WL_BTC_FLAG_PS_PROTECT           (1 << 4)
+#define WL_BTC_FLAG_SIM_TX_LP	         (1 << 5)
+#define WL_BTC_FLAG_ECI                  (1 << 6)
+#define WL_BTC_FLAG_LIGHT                (1 << 7)
+#define WL_BTC_FLAG_PARALLEL             (1 << 8)
+
+/* maximum channels returned by the get valid channels iovar */
+#define WL_NUMCHANNELS		64
+
+/* max number of chanspecs (used by the iovar to calc. buf space) */
+#define WL_NUMCHANSPECS 110
+
+/* WDS link local endpoint WPA role */
+#define WL_WDS_WPA_ROLE_AUTH	0	/* authenticator */
+#define WL_WDS_WPA_ROLE_SUP	1	/* supplicant */
+#define WL_WDS_WPA_ROLE_AUTO	255	/* auto, based on mac addr value */
+
+/* Base offset values */
+#define WL_PKT_FILTER_BASE_PKT   0
+#define WL_PKT_FILTER_BASE_END   1
+#define WL_PKT_FILTER_BASE_D11_H 2 /* May be removed */
+#define WL_PKT_FILTER_BASE_D11_D 3 /* May be removed */
+#define WL_PKT_FILTER_BASE_ETH_H 4
+#define WL_PKT_FILTER_BASE_ETH_D 5
+#define WL_PKT_FILTER_BASE_ARP_H 6
+#define WL_PKT_FILTER_BASE_ARP_D 7 /* May be removed */
+#define WL_PKT_FILTER_BASE_IP4_H 8
+#define WL_PKT_FILTER_BASE_IP4_D 9
+#define WL_PKT_FILTER_BASE_IP6_H 10
+#define WL_PKT_FILTER_BASE_IP6_D 11
+#define WL_PKT_FILTER_BASE_TCP_H 12
+#define WL_PKT_FILTER_BASE_TCP_D 13 /* May be removed */
+#define WL_PKT_FILTER_BASE_UDP_H 14
+#define WL_PKT_FILTER_BASE_UDP_D 15
+#define WL_PKT_FILTER_BASE_IP6_P 16
+#define WL_PKT_FILTER_BASE_COUNT 17 /* May be removed */
+
+/* String mapping for bases that may be used by applications or debug */
+#define WL_PKT_FILTER_BASE_NAMES \
+	{ "START", WL_PKT_FILTER_BASE_PKT },   \
+	{ "END",   WL_PKT_FILTER_BASE_END },   \
+	{ "ETH_H", WL_PKT_FILTER_BASE_ETH_H }, \
+	{ "ETH_D", WL_PKT_FILTER_BASE_ETH_D }, \
+	{ "D11_H", WL_PKT_FILTER_BASE_D11_H }, \
+	{ "D11_D", WL_PKT_FILTER_BASE_D11_D }, \
+	{ "ARP_H", WL_PKT_FILTER_BASE_ARP_H }, \
+	{ "IP4_H", WL_PKT_FILTER_BASE_IP4_H }, \
+	{ "IP4_D", WL_PKT_FILTER_BASE_IP4_D }, \
+	{ "IP6_H", WL_PKT_FILTER_BASE_IP6_H }, \
+	{ "IP6_D", WL_PKT_FILTER_BASE_IP6_D }, \
+	{ "IP6_P", WL_PKT_FILTER_BASE_IP6_P }, \
+	{ "TCP_H", WL_PKT_FILTER_BASE_TCP_H }, \
+	{ "TCP_D", WL_PKT_FILTER_BASE_TCP_D }, \
+	{ "UDP_H", WL_PKT_FILTER_BASE_UDP_H }, \
+	{ "UDP_D", WL_PKT_FILTER_BASE_UDP_D }
+
+/* Flags for a pattern list element */
+#define WL_PKT_FILTER_MFLAG_NEG 0x0001
+
+/*
+ * Packet engine interface
+ */
+
+#define WL_PKTENG_PER_TX_START			0x01
+#define WL_PKTENG_PER_TX_STOP			0x02
+#define WL_PKTENG_PER_RX_START			0x04
+#define WL_PKTENG_PER_RX_WITH_ACK_START		0x05
+#define WL_PKTENG_PER_TX_WITH_ACK_START		0x06
+#define WL_PKTENG_PER_RX_STOP			0x08
+#define WL_PKTENG_PER_MASK			0xff
+
+#define WL_PKTENG_SYNCHRONOUS			0x100	/* synchronous flag */
+
+#define WL_PKTENG_MAXPKTSZ				16384	/* max pktsz limit for pkteng */
+
+#define NUM_80211b_RATES	4
+#define NUM_80211ag_RATES	8
+#define NUM_80211n_RATES	32
+#define NUM_80211_RATES		(NUM_80211b_RATES+NUM_80211ag_RATES+NUM_80211n_RATES)
+
+/*
+ * WOWL capability/override settings
+ */
+#define WL_WOWL_MAGIC           (1 << 0)    /* Wakeup on Magic packet */
+#define WL_WOWL_NET             (1 << 1)    /* Wakeup on Netpattern */
+#define WL_WOWL_DIS             (1 << 2)    /* Wakeup on loss-of-link due to Disassoc/Deauth */
+#define WL_WOWL_RETR            (1 << 3)    /* Wakeup on retrograde TSF */
+#define WL_WOWL_BCN             (1 << 4)    /* Wakeup on loss of beacon */
+#define WL_WOWL_TST             (1 << 5)    /* Wakeup after test */
+#define WL_WOWL_M1              (1 << 6)    /* Wakeup after PTK refresh */
+#define WL_WOWL_EAPID           (1 << 7)    /* Wakeup after receipt of EAP-Identity Req */
+#define WL_WOWL_PME_GPIO        (1 << 8)    /* Wakeind via PME(0) or GPIO(1) */
+#define WL_WOWL_NEEDTKIP1       (1 << 9)    /* need tkip phase 1 key to be updated by the driver */
+#define WL_WOWL_GTK_FAILURE     (1 << 10)   /* enable wakeup if GTK fails */
+#define WL_WOWL_EXTMAGPAT       (1 << 11)   /* support extended magic packets */
+#define WL_WOWL_ARPOFFLOAD      (1 << 12)   /* support ARP/NS/keepalive offloading */
+#define WL_WOWL_WPA2            (1 << 13)   /* read protocol version for EAPOL frames */
+#define WL_WOWL_KEYROT          (1 << 14)   /* If the bit is set, use key rotaton */
+#define WL_WOWL_BCAST           (1 << 15)   /* If the bit is set, frm received was bcast frame */
+#define WL_WOWL_SCANOL          (1 << 16)   /* If the bit is set, scan offload is enabled */
+#define WL_WOWL_TCPKEEP_TIME    (1 << 17)   /* Wakeup on tcpkeep alive timeout */
+#define WL_WOWL_MDNS_CONFLICT   (1 << 18)   /* Wakeup on mDNS Conflict Resolution */
+#define WL_WOWL_MDNS_SERVICE    (1 << 19)   /* Wakeup on mDNS Service Connect */
+#define WL_WOWL_TCPKEEP_DATA    (1 << 20)   /* tcp keepalive got data */
+#define WL_WOWL_FW_HALT         (1 << 21)   /* Firmware died in wowl mode */
+#define WL_WOWL_ENAB_HWRADIO    (1 << 22)   /* Enable detection of radio button changes */
+#define WL_WOWL_MIC_FAIL        (1 << 23)   /* Offloads detected MIC failure(s) */
+#define WL_WOWL_LINKDOWN        (1 << 31)   /* Link Down indication in WoWL mode */
+
+#define WL_WOWL_TCPKEEP         (1 << 20)   /* temp copy to satisfy automerger */
+#define MAGIC_PKT_MINLEN 102    /* Magic pkt min length is 6 * 0xFF + 16 * ETHER_ADDR_LEN */
+
+#define WOWL_PATTEN_TYPE_ARP	(1 << 0)	/* ARP offload Pattern */
+#define WOWL_PATTEN_TYPE_NA	(1 << 1)	/* NA offload Pattern */
+
+#define MAGIC_PKT_MINLEN	102    /* Magic pkt min length is 6 * 0xFF + 16 * ETHER_ADDR_LEN */
+#define MAGIC_PKT_NUM_MAC_ADDRS	16
+
+
+/* Overlap BSS Scan parameters default, minimum, maximum */
+#define WLC_OBSS_SCAN_PASSIVE_DWELL_DEFAULT		20	/* unit TU */
+#define WLC_OBSS_SCAN_PASSIVE_DWELL_MIN			5	/* unit TU */
+#define WLC_OBSS_SCAN_PASSIVE_DWELL_MAX			1000	/* unit TU */
+#define WLC_OBSS_SCAN_ACTIVE_DWELL_DEFAULT		10	/* unit TU */
+#define WLC_OBSS_SCAN_ACTIVE_DWELL_MIN			10	/* unit TU */
+#define WLC_OBSS_SCAN_ACTIVE_DWELL_MAX			1000	/* unit TU */
+#define WLC_OBSS_SCAN_WIDTHSCAN_INTERVAL_DEFAULT	300	/* unit Sec */
+#define WLC_OBSS_SCAN_WIDTHSCAN_INTERVAL_MIN		10	/* unit Sec */
+#define WLC_OBSS_SCAN_WIDTHSCAN_INTERVAL_MAX		900	/* unit Sec */
+#define WLC_OBSS_SCAN_CHANWIDTH_TRANSITION_DLY_DEFAULT	5
+#define WLC_OBSS_SCAN_CHANWIDTH_TRANSITION_DLY_MIN	5
+#define WLC_OBSS_SCAN_CHANWIDTH_TRANSITION_DLY_MAX	100
+#define WLC_OBSS_SCAN_PASSIVE_TOTAL_PER_CHANNEL_DEFAULT	200	/* unit TU */
+#define WLC_OBSS_SCAN_PASSIVE_TOTAL_PER_CHANNEL_MIN	200	/* unit TU */
+#define WLC_OBSS_SCAN_PASSIVE_TOTAL_PER_CHANNEL_MAX	10000	/* unit TU */
+#define WLC_OBSS_SCAN_ACTIVE_TOTAL_PER_CHANNEL_DEFAULT	20	/* unit TU */
+#define WLC_OBSS_SCAN_ACTIVE_TOTAL_PER_CHANNEL_MIN	20	/* unit TU */
+#define WLC_OBSS_SCAN_ACTIVE_TOTAL_PER_CHANNEL_MAX	10000	/* unit TU */
+#define WLC_OBSS_SCAN_ACTIVITY_THRESHOLD_DEFAULT	25	/* unit percent */
+#define WLC_OBSS_SCAN_ACTIVITY_THRESHOLD_MIN		0	/* unit percent */
+#define WLC_OBSS_SCAN_ACTIVITY_THRESHOLD_MAX		100	/* unit percent */
+
+#define WL_MIN_NUM_OBSS_SCAN_ARG 7	/* minimum number of arguments required for OBSS Scan */
+
+#define WL_COEX_INFO_MASK		0x07
+#define WL_COEX_INFO_REQ		0x01
+#define	WL_COEX_40MHZ_INTOLERANT	0x02
+#define	WL_COEX_WIDTH20			0x04
+
+#define	WLC_RSSI_INVALID	 0	/* invalid RSSI value */
+
+#define MAX_RSSI_LEVELS 8
+
+/* **** EXTLOG **** */
+#define EXTLOG_CUR_VER		0x0100
+
+#define MAX_ARGSTR_LEN		18 /* At least big enough for storing ETHER_ADDR_STR_LEN */
+
+/* log modules (bitmap) */
+#define LOG_MODULE_COMMON	0x0001
+#define LOG_MODULE_ASSOC	0x0002
+#define LOG_MODULE_EVENT	0x0004
+#define LOG_MODULE_MAX		3			/* Update when adding module */
+
+/* log levels */
+#define WL_LOG_LEVEL_DISABLE	0
+#define WL_LOG_LEVEL_ERR	1
+#define WL_LOG_LEVEL_WARN	2
+#define WL_LOG_LEVEL_INFO	3
+#define WL_LOG_LEVEL_MAX	WL_LOG_LEVEL_INFO	/* Update when adding level */
+
+/* flag */
+#define LOG_FLAG_EVENT		1
+
+/* log arg_type */
+#define LOG_ARGTYPE_NULL	0
+#define LOG_ARGTYPE_STR		1	/* %s */
+#define LOG_ARGTYPE_INT		2	/* %d */
+#define LOG_ARGTYPE_INT_STR	3	/* %d...%s */
+#define LOG_ARGTYPE_STR_INT	4	/* %s...%d */
+
+/* 802.11 Mgmt Packet flags */
+#define VNDR_IE_BEACON_FLAG	0x1
+#define VNDR_IE_PRBRSP_FLAG	0x2
+#define VNDR_IE_ASSOCRSP_FLAG	0x4
+#define VNDR_IE_AUTHRSP_FLAG	0x8
+#define VNDR_IE_PRBREQ_FLAG	0x10
+#define VNDR_IE_ASSOCREQ_FLAG	0x20
+#define VNDR_IE_IWAPID_FLAG	0x40 /* vendor IE in IW advertisement protocol ID field */
+#define VNDR_IE_CUSTOM_FLAG	0x100 /* allow custom IE id */
+
+#if defined(WLP2P)
+/* P2P Action Frames flags (spec ordered) */
+#define VNDR_IE_GONREQ_FLAG     0x001000
+#define VNDR_IE_GONRSP_FLAG     0x002000
+#define VNDR_IE_GONCFM_FLAG     0x004000
+#define VNDR_IE_INVREQ_FLAG     0x008000
+#define VNDR_IE_INVRSP_FLAG     0x010000
+#define VNDR_IE_DISREQ_FLAG     0x020000
+#define VNDR_IE_DISRSP_FLAG     0x040000
+#define VNDR_IE_PRDREQ_FLAG     0x080000
+#define VNDR_IE_PRDRSP_FLAG     0x100000
+
+#define VNDR_IE_P2PAF_SHIFT	12
+#endif /* WLP2P */
+
+/* channel interference measurement (chanim) related defines */
+
+/* chanim mode */
+#define CHANIM_DISABLE	0	/* disabled */
+#define CHANIM_DETECT	1	/* detection only */
+#define CHANIM_EXT		2	/* external state machine */
+#define CHANIM_ACT		3	/* full internal state machine, detect + act */
+#define CHANIM_MODE_MAX 4
+
+/* define for apcs reason code */
+#define APCS_INIT		0
+#define APCS_IOCTL		1
+#define APCS_CHANIM		2
+#define APCS_CSTIMER		3
+#define APCS_BTA		4
+#define APCS_TXDLY		5
+#define APCS_NONACSD		6
+#define APCS_DFS_REENTRY	7
+#define APCS_TXFAIL		8
+#define APCS_MAX		9
+
+/* number of ACS record entries */
+#define CHANIM_ACS_RECORD			10
+
+/* CHANIM */
+#define CCASTATS_TXDUR  0
+#define CCASTATS_INBSS  1
+#define CCASTATS_OBSS   2
+#define CCASTATS_NOCTG  3
+#define CCASTATS_NOPKT  4
+#define CCASTATS_DOZE   5
+#define CCASTATS_TXOP	6
+#define CCASTATS_GDTXDUR        7
+#define CCASTATS_BDTXDUR        8
+#define CCASTATS_MAX    9
+
+#define WL_CHANIM_COUNT_ALL	0xff
+#define WL_CHANIM_COUNT_ONE	0x1
+
+/* ap tpc modes */
+#define	AP_TPC_OFF		0
+#define	AP_TPC_BSS_PWR		1	/* BSS power control */
+#define AP_TPC_AP_PWR		2	/* AP power control */
+#define	AP_TPC_AP_BSS_PWR	3	/* Both AP and BSS power control */
+#define AP_TPC_MAX_LINK_MARGIN	127
+
+/* ap tpc modes */
+#define	AP_TPC_OFF		0
+#define	AP_TPC_BSS_PWR		1	/* BSS power control */
+#define AP_TPC_AP_PWR		2	/* AP power control */
+#define	AP_TPC_AP_BSS_PWR	3	/* Both AP and BSS power control */
+#define AP_TPC_MAX_LINK_MARGIN	127
+
+/* state */
+#define WL_P2P_DISC_ST_SCAN	0
+#define WL_P2P_DISC_ST_LISTEN	1
+#define WL_P2P_DISC_ST_SEARCH	2
+
+/* i/f type */
+#define WL_P2P_IF_CLIENT	0
+#define WL_P2P_IF_GO		1
+#define WL_P2P_IF_DYNBCN_GO	2
+#define WL_P2P_IF_DEV		3
+
+/* count */
+#define WL_P2P_SCHED_RSVD	0
+#define WL_P2P_SCHED_REPEAT	255	/* anything > 255 will be treated as 255 */
+
+#define WL_P2P_SCHED_FIXED_LEN		3
+
+/* schedule type */
+#define WL_P2P_SCHED_TYPE_ABS		0	/* Scheduled Absence */
+#define WL_P2P_SCHED_TYPE_REQ_ABS	1	/* Requested Absence */
+
+/* schedule action during absence periods (for WL_P2P_SCHED_ABS type) */
+#define WL_P2P_SCHED_ACTION_NONE	0	/* no action */
+#define WL_P2P_SCHED_ACTION_DOZE	1	/* doze */
+/* schedule option - WL_P2P_SCHED_TYPE_REQ_ABS */
+#define WL_P2P_SCHED_ACTION_GOOFF	2	/* turn off GO beacon/prbrsp functions */
+/* schedule option - WL_P2P_SCHED_TYPE_XXX */
+#define WL_P2P_SCHED_ACTION_RESET	255	/* reset */
+
+/* schedule option - WL_P2P_SCHED_TYPE_ABS */
+#define WL_P2P_SCHED_OPTION_NORMAL	0	/* normal start/interval/duration/count */
+#define WL_P2P_SCHED_OPTION_BCNPCT	1	/* percentage of beacon interval */
+/* schedule option - WL_P2P_SCHED_TYPE_REQ_ABS */
+#define WL_P2P_SCHED_OPTION_TSFOFS	2	/* normal start/internal/duration/count with
+						 * start being an offset of the 'current' TSF
+						 */
+
+/* feature flags */
+#define WL_P2P_FEAT_GO_CSA	(1 << 0)	/* GO moves with the STA using CSA method */
+#define WL_P2P_FEAT_GO_NOLEGACY	(1 << 1)	/* GO does not probe respond to non-p2p probe
+						 * requests
+						 */
+#define WL_P2P_FEAT_RESTRICT_DEV_RESP (1 << 2)	/* Restrict p2p dev interface from responding */
+
+/* n-mode support capability */
+/* 2x2 includes both 1x1 & 2x2 devices
+ * reserved #define 2 for future when we want to separate 1x1 & 2x2 and
+ * control it independently
+ */
+#define WL_11N_2x2			1
+#define WL_11N_3x3			3
+#define WL_11N_4x4			4
+
+/* define 11n feature disable flags */
+#define WLFEATURE_DISABLE_11N		0x00000001
+#define WLFEATURE_DISABLE_11N_STBC_TX	0x00000002
+#define WLFEATURE_DISABLE_11N_STBC_RX	0x00000004
+#define WLFEATURE_DISABLE_11N_SGI_TX	0x00000008
+#define WLFEATURE_DISABLE_11N_SGI_RX	0x00000010
+#define WLFEATURE_DISABLE_11N_AMPDU_TX	0x00000020
+#define WLFEATURE_DISABLE_11N_AMPDU_RX	0x00000040
+#define WLFEATURE_DISABLE_11N_GF	0x00000080
+
+/* Proxy STA modes */
+#define PSTA_MODE_DISABLED		0
+#define PSTA_MODE_PROXY			1
+#define PSTA_MODE_REPEATER		2
+
+/* op code in nat_cfg */
+#define NAT_OP_ENABLE		1	/* enable NAT on given interface */
+#define NAT_OP_DISABLE		2	/* disable NAT on given interface */
+#define NAT_OP_DISABLE_ALL	3	/* disable NAT on all interfaces */
+
+/* NAT state */
+#define NAT_STATE_ENABLED	1	/* NAT is enabled */
+#define NAT_STATE_DISABLED	2	/* NAT is disabled */
+
+#define CHANNEL_5G_LOW_START	36	/* 5G low (36..48) CDD enable/disable bit mask */
+#define CHANNEL_5G_MID_START	52	/* 5G mid (52..64) CDD enable/disable bit mask */
+#define CHANNEL_5G_HIGH_START	100	/* 5G high (100..140) CDD enable/disable bit mask */
+#define CHANNEL_5G_UPPER_START	149	/* 5G upper (149..161) CDD enable/disable bit mask */
+
+/* D0 Coalescing */
+#define IPV4_ARP_FILTER		0x0001
+#define IPV4_NETBT_FILTER	0x0002
+#define IPV4_LLMNR_FILTER	0x0004
+#define IPV4_SSDP_FILTER	0x0008
+#define IPV4_WSD_FILTER		0x0010
+#define IPV6_NETBT_FILTER	0x0200
+#define IPV6_LLMNR_FILTER	0x0400
+#define IPV6_SSDP_FILTER	0x0800
+#define IPV6_WSD_FILTER		0x1000
+
+/* Network Offload Engine */
+#define NWOE_OL_ENABLE		0x00000001
+
+/*
+ * Traffic management structures/defines.
+ */
+
+/* Traffic management bandwidth parameters */
+#define TRF_MGMT_MAX_PRIORITIES                 3
+
+#define TRF_MGMT_FLAG_ADD_DSCP                  0x0001  /* Add DSCP to IP TOS field */
+#define TRF_MGMT_FLAG_DISABLE_SHAPING           0x0002  /* Don't shape traffic */
+#define TRF_MGMT_FLAG_MANAGE_LOCAL_TRAFFIC      0x0008  /* Manage traffic over our local subnet */
+#define TRF_MGMT_FLAG_FILTER_ON_MACADDR         0x0010  /* filter on MAC address */
+#define TRF_MGMT_FLAG_NO_RX                     0x0020  /* do not apply fiters to rx packets */
+
+#define TRF_FILTER_MAC_ADDR              0x0001 /* L2 filter use dst mac address for filtering */
+#define TRF_FILTER_IP_ADDR               0x0002 /* L3 filter use ip ddress for filtering */
+#define TRF_FILTER_L4                    0x0004 /* L4 filter use tcp/udp for filtering */
+#define TRF_FILTER_DWM                   0x0008 /* L3 filter use DSCP for filtering */
+#define TRF_FILTER_FAVORED               0x0010 /* Tag the packet FAVORED */
+
+/* WNM/NPS subfeatures mask */
+#define WL_WNM_BSSTRANS		0x00000001
+#define WL_WNM_PROXYARP		0x00000002
+#define WL_WNM_MAXIDLE		0x00000004
+#define WL_WNM_TIMBC		0x00000008
+#define WL_WNM_TFS		0x00000010
+#define WL_WNM_SLEEP		0x00000020
+#define WL_WNM_DMS		0x00000040
+#define WL_WNM_FMS		0x00000080
+#define WL_WNM_NOTIF		0x00000100
+#define WL_WNM_MAX		0x00000200
+
+#ifndef ETHER_MAX_DATA
+#define ETHER_MAX_DATA	1500
+#endif /* ETHER_MAX_DATA */
+
+/* Different discovery modes for dpt */
+#define	DPT_DISCOVERY_MANUAL	0x01	/* manual discovery mode */
+#define	DPT_DISCOVERY_AUTO	0x02	/* auto discovery mode */
+#define	DPT_DISCOVERY_SCAN	0x04	/* scan-based discovery mode */
+
+/* different path selection values */
+#define DPT_PATHSEL_AUTO	0	/* auto mode for path selection */
+#define DPT_PATHSEL_DIRECT	1	/* always use direct DPT path */
+#define DPT_PATHSEL_APPATH	2	/* always use AP path */
+
+/* different ops for deny list */
+#define DPT_DENY_LIST_ADD	1	/* add to dpt deny list */
+#define DPT_DENY_LIST_REMOVE	2	/* remove from dpt deny list */
+
+/* different ops for manual end point */
+#define DPT_MANUAL_EP_CREATE	1	/* create manual dpt endpoint */
+#define DPT_MANUAL_EP_MODIFY	2	/* modify manual dpt endpoint */
+#define DPT_MANUAL_EP_DELETE	3	/* delete manual dpt endpoint */
+
+/* flags to indicate DPT status */
+#define	DPT_STATUS_ACTIVE	0x01	/* link active (though may be suspended) */
+#define	DPT_STATUS_AES		0x02	/* link secured through AES encryption */
+#define	DPT_STATUS_FAILED	0x04	/* DPT link failed */
+
+#ifdef WLTDLS
+/* different ops for manual end point */
+#define TDLS_MANUAL_EP_CREATE	1	/* create manual dpt endpoint */
+#define TDLS_MANUAL_EP_MODIFY	2	/* modify manual dpt endpoint */
+#define TDLS_MANUAL_EP_DELETE	3	/* delete manual dpt endpoint */
+#define TDLS_MANUAL_EP_PM		4	/*  put dpt endpoint in PM mode */
+#define TDLS_MANUAL_EP_WAKE		5	/* wake up dpt endpoint from PM */
+#define TDLS_MANUAL_EP_DISCOVERY	6	/* discover if endpoint is TDLS capable */
+#define TDLS_MANUAL_EP_CHSW		7	/* channel switch */
+#define TDLS_MANUAL_EP_WFD_TPQ	8	/* WiFi-Display Tunneled Probe reQuest */
+
+/* modes */
+#define TDLS_WFD_IE_TX			0
+#define TDLS_WFD_IE_RX			1
+#define TDLS_WFD_PROBE_IE_TX	2
+#define TDLS_WFD_PROBE_IE_RX	3
+#endif /* WLTDLS */
+
+/* define for flag */
+#define TSPEC_PENDING		0	/* TSPEC pending */
+#define TSPEC_ACCEPTED		1	/* TSPEC accepted */
+#define TSPEC_REJECTED		2	/* TSPEC rejected */
+#define TSPEC_UNKNOWN		3	/* TSPEC unknown */
+#define TSPEC_STATUS_MASK	7	/* TSPEC status mask */
+
+#ifdef BCMCCX
+/* "wlan_reason" iovar interface */
+#define WL_WLAN_ASSOC_REASON_NORMAL_NETWORK	0 /* normal WLAN network setup */
+#define WL_WLAN_ASSOC_REASON_ROAM_FROM_CELLULAR_NETWORK	1 /* roam from Cellular network */
+#define WL_WLAN_ASSOC_REASON_ROAM_FROM_LAN	2 /* roam from LAN */
+#define WL_WLAN_ASSOC_REASON_MAX		2 /* largest value allowed */
+#endif /* BCMCCX */
+
+/* Software feature flag defines used by wlfeatureflag */
+#ifdef WLAFTERBURNER
+#define WL_SWFL_ABBFL       0x0001 /* Allow Afterburner on systems w/o hardware BFL */
+#define WL_SWFL_ABENCORE    0x0002 /* Allow AB on non-4318E chips */
+#endif /* WLAFTERBURNER */
+#define WL_SWFL_NOHWRADIO	0x0004
+#define WL_SWFL_FLOWCONTROL     0x0008 /* Enable backpressure to OS stack */
+#define WL_SWFL_WLBSSSORT	0x0010 /* Per-port supports sorting of BSS */
+
+#define WL_LIFETIME_MAX 0xFFFF /* Max value in ms */
+
+#define CSA_BROADCAST_ACTION_FRAME	0	/* csa broadcast action frame */
+#define CSA_UNICAST_ACTION_FRAME	  1 /* csa unicast action frame */
+
+/* Roaming trigger definitions for WLC_SET_ROAM_TRIGGER.
+ *
+ * (-100 < value < 0)   value is used directly as a roaming trigger in dBm
+ * (0 <= value) value specifies a logical roaming trigger level from
+ *                      the list below
+ *
+ * WLC_GET_ROAM_TRIGGER always returns roaming trigger value in dBm, never
+ * the logical roam trigger value.
+ */
+#define WLC_ROAM_TRIGGER_DEFAULT	0 /* default roaming trigger */
+#define WLC_ROAM_TRIGGER_BANDWIDTH	1 /* optimize for bandwidth roaming trigger */
+#define WLC_ROAM_TRIGGER_DISTANCE	2 /* optimize for distance roaming trigger */
+#define WLC_ROAM_TRIGGER_AUTO		3 /* auto-detect environment */
+#define WLC_ROAM_TRIGGER_MAX_VALUE	3 /* max. valid value */
+
+#define WLC_ROAM_NEVER_ROAM_TRIGGER	(-100) /* Avoid Roaming by setting a large value */
+
+/* Preferred Network Offload (PNO, formerly PFN) defines */
+#define WPA_AUTH_PFN_ANY	0xffffffff	/* for PFN, match only ssid */
+
+#define SORT_CRITERIA_BIT		0
+#define AUTO_NET_SWITCH_BIT		1
+#define ENABLE_BKGRD_SCAN_BIT		2
+#define IMMEDIATE_SCAN_BIT		3
+#define	AUTO_CONNECT_BIT		4
+#define	ENABLE_BD_SCAN_BIT		5
+#define ENABLE_ADAPTSCAN_BIT		6
+#define IMMEDIATE_EVENT_BIT		8
+#define SUPPRESS_SSID_BIT		9
+#define ENABLE_NET_OFFLOAD_BIT		10
+
+#define SORT_CRITERIA_MASK		0x0001
+#define AUTO_NET_SWITCH_MASK		0x0002
+#define ENABLE_BKGRD_SCAN_MASK		0x0004
+#define IMMEDIATE_SCAN_MASK		0x0008
+#define	AUTO_CONNECT_MASK		0x0010
+
+#define ENABLE_BD_SCAN_MASK		0x0020
+#define ENABLE_ADAPTSCAN_MASK		0x00c0
+#define IMMEDIATE_EVENT_MASK		0x0100
+#define SUPPRESS_SSID_MASK		0x0200
+#define ENABLE_NET_OFFLOAD_MASK		0x0400
+
+#define PFN_VERSION			2
+#define PFN_SCANRESULT_VERSION		1
+#define MAX_PFN_LIST_COUNT		16
+
+#define PFN_COMPLETE			1
+#define PFN_INCOMPLETE			0
+
+#define DEFAULT_BESTN			2
+#define DEFAULT_MSCAN			0
+#define DEFAULT_REPEAT			10
+#define DEFAULT_EXP				2
+
+#define WL_PFN_SUPPRESSFOUND_MASK	0x08
+#define WL_PFN_SUPPRESSLOST_MASK	0x10
+#define WL_PFN_RSSI_MASK			0xff00
+#define WL_PFN_RSSI_SHIFT			8
+
+#define WL_PFN_REPORT_ALLNET    0
+#define WL_PFN_REPORT_SSIDNET   1
+#define WL_PFN_REPORT_BSSIDNET  2
+
+#define WL_PFN_CFG_FLAGS_PROHIBITED	0x00000001	/* Accept and use prohibited channels */
+#define WL_PFN_CFG_FLAGS_RESERVED	0xfffffffe	/* Remaining reserved for future use */
+
+#define WL_PFN_HIDDEN_BIT		2
+#define PNO_SCAN_MAX_FW			508*1000	/* max time scan time in msec */
+#define PNO_SCAN_MAX_FW_SEC		PNO_SCAN_MAX_FW/1000 /* max time scan time in SEC */
+#define PNO_SCAN_MIN_FW_SEC		10			/* min time scan time in SEC */
+#define WL_PFN_HIDDEN_MASK		0x4
+
+/* TCP Checksum Offload error injection for testing */
+#define TOE_ERRTEST_TX_CSUM	0x00000001
+#define TOE_ERRTEST_RX_CSUM	0x00000002
+#define TOE_ERRTEST_RX_CSUM2	0x00000004
+
+/* ARP Offload feature flags for arp_ol iovar */
+#define ARP_OL_AGENT		0x00000001
+#define ARP_OL_SNOOP		0x00000002
+#define ARP_OL_HOST_AUTO_REPLY	0x00000004
+#define ARP_OL_PEER_AUTO_REPLY	0x00000008
+
+/* ARP Offload error injection */
+#define ARP_ERRTEST_REPLY_PEER	0x1
+#define ARP_ERRTEST_REPLY_HOST	0x2
+
+#define ARP_MULTIHOMING_MAX	8	/* Maximum local host IP addresses */
+#define ND_MULTIHOMING_MAX 10	/* Maximum local host IP addresses */
+#define ND_REQUEST_MAX		5	/* Max set of offload params */
+
+/* AWDL AF flags for awdl_oob_af iovar */
+#define AWDL_OOB_AF_FILL_TSF_PARAMS			0x00000001
+#define AWDL_OOB_AF_FILL_SYNC_PARAMS		0x00000002
+#define AWDL_OOB_AF_FILL_ELECT_PARAMS		0x00000004
+#define AWDL_OOB_AF_PARAMS_SIZE 38
+
+#define AWDL_OPMODE_AUTO	0
+#define AWDL_OPMODE_FIXED	1
+
+#define AWDL_PEER_STATE_OPEN	0
+#define AWDL_PEER_STATE_CLOSE	1
+
+#define SYNC_ROLE_SLAVE			0
+#define SYNC_ROLE_NE_MASTER		1	/* Non-election master */
+#define SYNC_ROLE_MASTER		2
+
+/* peer opcode */
+#define AWDL_PEER_OP_ADD	0
+#define AWDL_PEER_OP_DEL	1
+#define AWDL_PEER_OP_INFO	2
+#define AWDL_PEER_OP_UPD	3
+
+/* AOAC wake event flag */
+#define WAKE_EVENT_NLO_DISCOVERY_BIT		1
+#define WAKE_EVENT_AP_ASSOCIATION_LOST_BIT	2
+#define WAKE_EVENT_GTK_HANDSHAKE_ERROR_BIT 4
+#define WAKE_EVENT_4WAY_HANDSHAKE_REQUEST_BIT 8
+
+#define MAX_NUM_WOL_PATTERN	16 /* LOGO requirements min 16 */
+
+/* Packet filter operation mode */
+/* True: 1; False: 0 */
+#define PKT_FILTER_MODE_FORWARD_ON_MATCH		1
+/* Enable and disable pkt_filter as a whole */
+#define PKT_FILTER_MODE_DISABLE					2
+/* Cache first matched rx pkt(be queried by host later) */
+#define PKT_FILTER_MODE_PKT_CACHE_ON_MATCH		4
+/* If pkt_filter is enabled and no filter is set, don't forward anything */
+#define PKT_FILTER_MODE_PKT_FORWARD_OFF_DEFAULT 8
+
+#ifdef DONGLEOVERLAYS
+#define OVERLAY_IDX_MASK		0x000000ff
+#define OVERLAY_IDX_SHIFT		0
+#define OVERLAY_FLAGS_MASK		0xffffff00
+#define OVERLAY_FLAGS_SHIFT		8
+/* overlay written to device memory immediately after loading the base image */
+#define OVERLAY_FLAG_POSTLOAD	0x100
+/* defer overlay download until the device responds w/WLC_E_OVL_DOWNLOAD event */
+#define OVERLAY_FLAG_DEFER_DL	0x200
+/* overlay downloaded prior to the host going to sleep */
+#define OVERLAY_FLAG_PRESLEEP	0x400
+#define OVERLAY_DOWNLOAD_CHUNKSIZE	1024
+#endif /* DONGLEOVERLAYS */
+
+/* reuse two number in the sc/rc space */
+#define	SMFS_CODE_MALFORMED 0xFFFE
+#define SMFS_CODE_IGNORED	0xFFFD
+
+/* RFAWARE def */
+#define BCM_ACTION_RFAWARE		0x77
+#define BCM_ACTION_RFAWARE_DCS  0x01
+
+/* DCS reason code define */
+#define BCM_DCS_IOVAR		0x1
+#define BCM_DCS_UNKNOWN		0xFF
+
+
+#ifdef PROP_TXSTATUS
+/* Bit definitions for tlv iovar */
+/*
+ * enable RSSI signals:
+ * WLFC_CTL_TYPE_RSSI
+ */
+#define WLFC_FLAGS_RSSI_SIGNALS			0x0001
+
+/* enable (if/mac_open, if/mac_close,, mac_add, mac_del) signals:
+ *
+ * WLFC_CTL_TYPE_MAC_OPEN
+ * WLFC_CTL_TYPE_MAC_CLOSE
+ *
+ * WLFC_CTL_TYPE_INTERFACE_OPEN
+ * WLFC_CTL_TYPE_INTERFACE_CLOSE
+ *
+ * WLFC_CTL_TYPE_MACDESC_ADD
+ * WLFC_CTL_TYPE_MACDESC_DEL
+ *
+ */
+#define WLFC_FLAGS_XONXOFF_SIGNALS		0x0002
+
+/* enable (status, fifo_credit, mac_credit) signals
+ * WLFC_CTL_TYPE_MAC_REQUEST_CREDIT
+ * WLFC_CTL_TYPE_TXSTATUS
+ * WLFC_CTL_TYPE_FIFO_CREDITBACK
+ */
+#define WLFC_FLAGS_CREDIT_STATUS_SIGNALS	0x0004
+
+#define WLFC_FLAGS_HOST_PROPTXSTATUS_ACTIVE	0x0008
+#define WLFC_FLAGS_PSQ_GENERATIONFSM_ENABLE	0x0010
+#define WLFC_FLAGS_PSQ_ZERO_BUFFER_ENABLE	0x0020
+#define WLFC_FLAGS_HOST_RXRERODER_ACTIVE	0x0040
+#define WLFC_FLAGS_PKT_STAMP_SIGNALS		0x0080
+
+#endif /* PROP_TXSTATUS */
+
+#define WL_TIMBC_STATUS_AP_UNKNOWN	255	/* AP status for internal use only */
+
+#define WL_DFRTS_LOGIC_OFF	0	/* Feature is disabled */
+#define WL_DFRTS_LOGIC_OR	1	/* OR all non-zero threshold conditions */
+#define WL_DFRTS_LOGIC_AND	2	/* AND all non-zero threshold conditions */
+
+/* Definitions for Reliable Multicast */
+#define WL_RELMCAST_MAX_CLIENT		32
+#define WL_RELMCAST_FLAG_INBLACKLIST	1
+#define WL_RELMCAST_FLAG_ACTIVEACKER	2
+#define WL_RELMCAST_FLAG_RELMCAST	4
+
+/* structures for proximity detection device role */
+#define WL_PROXD_MODE_DISABLE	0
+#define WL_PROXD_MODE_NEUTRAL	1
+#define WL_PROXD_MODE_INITIATOR	2
+#define WL_PROXD_MODE_TARGET	3
+#define WL_PROXD_RANDOM_WAKEUP	0x8000
+
+
+#ifdef NET_DETECT
+#define NET_DETECT_MAX_WAKE_DATA_SIZE	2048
+#define NET_DETECT_MAX_PROFILES		16
+#define NET_DETECT_MAX_CHANNELS		50
+#endif /* NET_DETECT */
+
+/* Bit masks for radio disabled status - returned by WL_GET_RADIO */
+#define WL_RADIO_SW_DISABLE		(1<<0)
+#define WL_RADIO_HW_DISABLE		(1<<1)
+#define WL_RADIO_MPC_DISABLE		(1<<2)
+#define WL_RADIO_COUNTRY_DISABLE	(1<<3)	/* some countries don't support any channel */
+
+#define	WL_SPURAVOID_OFF	0
+#define	WL_SPURAVOID_ON1	1
+#define	WL_SPURAVOID_ON2	2
+
+
+#define WL_4335_SPURAVOID_ON1	1
+#define WL_4335_SPURAVOID_ON2	2
+#define WL_4335_SPURAVOID_ON3	3
+#define WL_4335_SPURAVOID_ON4	4
+#define WL_4335_SPURAVOID_ON5	5
+#define WL_4335_SPURAVOID_ON6	6
+#define WL_4335_SPURAVOID_ON7	7
+#define WL_4335_SPURAVOID_ON8	8
+#define WL_4335_SPURAVOID_ON9	9
+
+/* Override bit for WLC_SET_TXPWR.  if set, ignore other level limits */
+#define WL_TXPWR_OVERRIDE	(1U<<31)
+#define WL_TXPWR_NEG   (1U<<30)
+
+
+/* phy types (returned by WLC_GET_PHYTPE) */
+#define	WLC_PHY_TYPE_A		0
+#define	WLC_PHY_TYPE_B		1
+#define	WLC_PHY_TYPE_G		2
+#define	WLC_PHY_TYPE_N		4
+#define	WLC_PHY_TYPE_LP		5
+#define	WLC_PHY_TYPE_SSN	6
+#define	WLC_PHY_TYPE_HT		7
+#define	WLC_PHY_TYPE_LCN	8
+#define	WLC_PHY_TYPE_LCN40	10
+#define WLC_PHY_TYPE_AC		11
+#define	WLC_PHY_TYPE_NULL	0xf
+
+/* Values for PM */
+#define PM_OFF	0
+#define PM_MAX	1
+#define PM_FAST 2
+#define PM_FORCE_OFF 3		/* use this bit to force PM off even bt is active */
+
+#define WL_WME_CNT_VERSION	1	/* current version of wl_wme_cnt_t */
+
+/* fbt_cap: FBT assoc / reassoc modes. */
+#define WLC_FBT_CAP_DRV_4WAY_AND_REASSOC  1 /* Driver 4-way handshake & reassoc (WLFBT). */
+
+/* monitor_promisc_level bits */
+#define WL_MONPROMISC_PROMISC 0x0001
+#define WL_MONPROMISC_CTRL 0x0002
+#define WL_MONPROMISC_FCS 0x0004
+
+/* TCP Checksum Offload defines */
+#define TOE_TX_CSUM_OL		0x00000001
+#define TOE_RX_CSUM_OL		0x00000002
+
+#endif /* wlioctl_defs_h */
diff --git a/drivers/net/wireless/bcmdhd/include/proto/802.11.h b/drivers/net/wireless/bcmdhd/include/proto/802.11.h
index aca9316..a8739a8 100644
--- a/drivers/net/wireless/bcmdhd/include/proto/802.11.h
+++ b/drivers/net/wireless/bcmdhd/include/proto/802.11.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 1999-2012, Broadcom Corporation
+ * Copyright (C) 1999-2014, Broadcom Corporation
  * 
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
@@ -21,7 +21,7 @@
  *
  * Fundamental types and constants relating to 802.11
  *
- * $Id: 802.11.h 368403 2012-11-13 17:20:09Z $
+ * $Id: 802.11.h 444070 2013-12-18 13:20:12Z $
  */
 
 #ifndef _802_11_H_
@@ -337,10 +337,10 @@ BWL_PRE_PACKED_STRUCT struct dot11_extch {
 typedef struct dot11_extch dot11_extch_ie_t;
 
 BWL_PRE_PACKED_STRUCT struct dot11_brcm_extch {
-	uint8	id;		
-	uint8	len;		
-	uint8	oui[3];		
-	uint8	type;           
+	uint8	id;		/* IE ID, 221, DOT11_MNG_PROPR_ID */
+	uint8	len;		/* IE length */
+	uint8	oui[3];
+	uint8	type;           /* type inidicates what follows */
 	uint8	extch;
 } BWL_POST_PACKED_STRUCT;
 typedef struct dot11_brcm_extch dot11_brcm_extch_ie_t;
@@ -994,6 +994,245 @@ typedef struct ti_ie ti_ie_t;
 #define DOT11_RC_TDLS_PEER_UNREACH	25
 #define DOT11_RC_TDLS_DOWN_UNSPECIFIED	26
 
+/* Status Codes */
+#define DOT11_SC_SUCCESS		0	/* Successful */
+#define DOT11_SC_FAILURE		1	/* Unspecified failure */
+#define DOT11_SC_TDLS_WAKEUP_SCH_ALT 2	/* TDLS wakeup schedule rejected but alternative  */
+					/* schedule provided */
+#define DOT11_SC_TDLS_WAKEUP_SCH_REJ 3	/* TDLS wakeup schedule rejected */
+#define DOT11_SC_TDLS_SEC_DISABLED	5	/* TDLS Security disabled */
+#define DOT11_SC_LIFETIME_REJ		6	/* Unacceptable lifetime */
+#define DOT11_SC_NOT_SAME_BSS		7	/* Not in same BSS */
+#define DOT11_SC_CAP_MISMATCH		10	/* Cannot support all requested
+						 * capabilities in the Capability
+						 * Information field
+						 */
+#define DOT11_SC_REASSOC_FAIL		11	/* Reassociation denied due to inability
+						 * to confirm that association exists
+						 */
+#define DOT11_SC_ASSOC_FAIL		12	/* Association denied due to reason
+						 * outside the scope of this standard
+						 */
+#define DOT11_SC_AUTH_MISMATCH		13	/* Responding station does not support
+						 * the specified authentication
+						 * algorithm
+						 */
+#define DOT11_SC_AUTH_SEQ		14	/* Received an Authentication frame
+						 * with authentication transaction
+						 * sequence number out of expected
+						 * sequence
+						 */
+#define DOT11_SC_AUTH_CHALLENGE_FAIL	15	/* Authentication rejected because of
+						 * challenge failure
+						 */
+#define DOT11_SC_AUTH_TIMEOUT		16	/* Authentication rejected due to timeout
+						 * waiting for next frame in sequence
+						 */
+#define DOT11_SC_ASSOC_BUSY_FAIL	17	/* Association denied because AP is
+						 * unable to handle additional
+						 * associated stations
+						 */
+#define DOT11_SC_ASSOC_RATE_MISMATCH	18	/* Association denied due to requesting
+						 * station not supporting all of the
+						 * data rates in the BSSBasicRateSet
+						 * parameter
+						 */
+#define DOT11_SC_ASSOC_SHORT_REQUIRED	19	/* Association denied due to requesting
+						 * station not supporting the Short
+						 * Preamble option
+						 */
+#define DOT11_SC_ASSOC_PBCC_REQUIRED	20	/* Association denied due to requesting
+						 * station not supporting the PBCC
+						 * Modulation option
+						 */
+#define DOT11_SC_ASSOC_AGILITY_REQUIRED	21	/* Association denied due to requesting
+						 * station not supporting the Channel
+						 * Agility option
+						 */
+#define DOT11_SC_ASSOC_SPECTRUM_REQUIRED	22	/* Association denied because Spectrum
+							 * Management capability is required.
+							 */
+#define DOT11_SC_ASSOC_BAD_POWER_CAP	23	/* Association denied because the info
+						 * in the Power Cap element is
+						 * unacceptable.
+						 */
+#define DOT11_SC_ASSOC_BAD_SUP_CHANNELS	24	/* Association denied because the info
+						 * in the Supported Channel element is
+						 * unacceptable
+						 */
+#define DOT11_SC_ASSOC_SHORTSLOT_REQUIRED	25	/* Association denied due to requesting
+							 * station not supporting the Short Slot
+							 * Time option
+							 */
+#define DOT11_SC_ASSOC_DSSSOFDM_REQUIRED 26	/* Association denied because requesting station
+						 * does not support the DSSS-OFDM option
+						 */
+#define DOT11_SC_ASSOC_HT_REQUIRED	27	/* Association denied because the requesting
+						 * station does not support HT features
+						 */
+#define DOT11_SC_ASSOC_R0KH_UNREACHABLE	28	/* Association denied due to AP
+						 * being unable to reach the R0 Key Holder
+						 */
+#define DOT11_SC_ASSOC_TRY_LATER	30	/* Association denied temporarily, try again later
+						 */
+#define DOT11_SC_ASSOC_MFP_VIOLATION	31	/* Association denied due to Robust Management
+						 * frame policy violation
+						 */
+
+#define	DOT11_SC_DECLINED		37	/* request declined */
+#define	DOT11_SC_INVALID_PARAMS		38	/* One or more params have invalid values */
+#define DOT11_SC_INVALID_PAIRWISE_CIPHER	42 /* invalid pairwise cipher */
+#define	DOT11_SC_INVALID_AKMP		43	/* Association denied due to invalid AKMP */
+#define DOT11_SC_INVALID_RSNIE_CAP	45	/* invalid RSN IE capabilities */
+#define DOT11_SC_DLS_NOT_ALLOWED	48	/* DLS is not allowed in the BSS by policy */
+#define	DOT11_SC_INVALID_PMKID		53	/* Association denied due to invalid PMKID */
+#define	DOT11_SC_INVALID_MDID		54	/* Association denied due to invalid MDID */
+#define	DOT11_SC_INVALID_FTIE		55	/* Association denied due to invalid FTIE */
+
+#define DOT11_SC_ADV_PROTO_NOT_SUPPORTED	59	/* ad proto not supported */
+#define DOT11_SC_NO_OUTSTAND_REQ			60	/* no outstanding req */
+#define DOT11_SC_RSP_NOT_RX_FROM_SERVER		61	/* no response from server */
+#define DOT11_SC_TIMEOUT					62	/* timeout */
+#define DOT11_SC_QUERY_RSP_TOO_LARGE		63	/* query rsp too large */
+#define DOT11_SC_SERVER_UNREACHABLE			65	/* server unreachable */
+
+#define DOT11_SC_UNEXP_MSG			70	/* Unexpected message */
+#define DOT11_SC_INVALID_SNONCE		71	/* Invalid SNonce */
+#define DOT11_SC_INVALID_RSNIE		72	/* Invalid contents of RSNIE */
+#define DOT11_SC_ASSOC_VHT_REQUIRED	104	/* Association denied because the requesting
+						 * station does not support VHT features.
+						 */
+
+#define DOT11_SC_TRANSMIT_FAILURE	79	/* transmission failure */
+
+/* Info Elts, length of INFORMATION portion of Info Elts */
+#define DOT11_MNG_DS_PARAM_LEN			1	/* d11 management DS parameter length */
+#define DOT11_MNG_IBSS_PARAM_LEN		2	/* d11 management IBSS parameter length */
+
+/* TIM Info element has 3 bytes fixed info in INFORMATION field,
+ * followed by 1 to 251 bytes of Partial Virtual Bitmap
+ */
+#define DOT11_MNG_TIM_FIXED_LEN			3	/* d11 management TIM fixed length */
+#define DOT11_MNG_TIM_DTIM_COUNT		0	/* d11 management DTIM count */
+#define DOT11_MNG_TIM_DTIM_PERIOD		1	/* d11 management DTIM period */
+#define DOT11_MNG_TIM_BITMAP_CTL		2	/* d11 management TIM BITMAP control  */
+#define DOT11_MNG_TIM_PVB			3	/* d11 management TIM PVB */
+
+/* TLV defines */
+#define TLV_TAG_OFF		0	/* tag offset */
+#define TLV_LEN_OFF		1	/* length offset */
+#define TLV_HDR_LEN		2	/* header length */
+#define TLV_BODY_OFF		2	/* body offset */
+#define TLV_BODY_LEN_MAX	255	/* max body length */
+
+/* Management Frame Information Element IDs */
+#define DOT11_MNG_SSID_ID			0	/* d11 management SSID id */
+#define DOT11_MNG_RATES_ID			1	/* d11 management rates id */
+#define DOT11_MNG_FH_PARMS_ID			2	/* d11 management FH parameter id */
+#define DOT11_MNG_DS_PARMS_ID			3	/* d11 management DS parameter id */
+#define DOT11_MNG_CF_PARMS_ID			4	/* d11 management CF parameter id */
+#define DOT11_MNG_TIM_ID			5	/* d11 management TIM id */
+#define DOT11_MNG_IBSS_PARMS_ID			6	/* d11 management IBSS parameter id */
+#define DOT11_MNG_COUNTRY_ID			7	/* d11 management country id */
+#define DOT11_MNG_HOPPING_PARMS_ID		8	/* d11 management hopping parameter id */
+#define DOT11_MNG_HOPPING_TABLE_ID		9	/* d11 management hopping table id */
+#define DOT11_MNG_REQUEST_ID			10	/* d11 management request id */
+#define DOT11_MNG_QBSS_LOAD_ID 			11	/* d11 management QBSS Load id */
+#define DOT11_MNG_EDCA_PARAM_ID			12	/* 11E EDCA Parameter id */
+#define DOT11_MNG_TSPEC_ID			13	/* d11 management TSPEC id */
+#define DOT11_MNG_TCLAS_ID			14	/* d11 management TCLAS id */
+#define DOT11_MNG_CHALLENGE_ID			16	/* d11 management chanllenge id */
+#define DOT11_MNG_PWR_CONSTRAINT_ID		32	/* 11H PowerConstraint */
+#define DOT11_MNG_PWR_CAP_ID			33	/* 11H PowerCapability */
+#define DOT11_MNG_TPC_REQUEST_ID 		34	/* 11H TPC Request */
+#define DOT11_MNG_TPC_REPORT_ID			35	/* 11H TPC Report */
+#define DOT11_MNG_SUPP_CHANNELS_ID		36	/* 11H Supported Channels */
+#define DOT11_MNG_CHANNEL_SWITCH_ID		37	/* 11H ChannelSwitch Announcement */
+#define DOT11_MNG_MEASURE_REQUEST_ID		38	/* 11H MeasurementRequest */
+#define DOT11_MNG_MEASURE_REPORT_ID		39	/* 11H MeasurementReport */
+#define DOT11_MNG_QUIET_ID			40	/* 11H Quiet */
+#define DOT11_MNG_IBSS_DFS_ID			41	/* 11H IBSS_DFS */
+#define DOT11_MNG_ERP_ID			42	/* d11 management ERP id */
+#define DOT11_MNG_TS_DELAY_ID			43	/* d11 management TS Delay id */
+#define DOT11_MNG_TCLAS_PROC_ID			44	/* d11 management TCLAS processing id */
+#define	DOT11_MNG_HT_CAP			45	/* d11 mgmt HT cap id */
+#define DOT11_MNG_QOS_CAP_ID			46	/* 11E QoS Capability id */
+#define DOT11_MNG_NONERP_ID			47	/* d11 management NON-ERP id */
+#define DOT11_MNG_RSN_ID			48	/* d11 management RSN id */
+#define DOT11_MNG_EXT_RATES_ID			50	/* d11 management ext. rates id */
+#define DOT11_MNG_AP_CHREP_ID			51	/* 11k AP Channel report id */
+#define DOT11_MNG_NEIGHBOR_REP_ID		52	/* 11k & 11v Neighbor report id */
+#define DOT11_MNG_RCPI_ID			53	/* 11k RCPI */
+#define DOT11_MNG_MDIE_ID			54	/* 11r Mobility domain id */
+#define DOT11_MNG_FTIE_ID			55	/* 11r Fast Bss Transition id */
+#define DOT11_MNG_FT_TI_ID			56	/* 11r Timeout Interval id */
+#define DOT11_MNG_RDE_ID			57	/* 11r RIC Data Element id */
+#define	DOT11_MNG_REGCLASS_ID			59	/* d11 management regulatory class id */
+#define DOT11_MNG_EXT_CSA_ID			60	/* d11 Extended CSA */
+#define	DOT11_MNG_HT_ADD			61	/* d11 mgmt additional HT info */
+#define	DOT11_MNG_EXT_CHANNEL_OFFSET		62	/* d11 mgmt ext channel offset */
+#define DOT11_MNG_BSS_AVR_ACCESS_DELAY_ID	63	/* 11k bss average access delay */
+#define DOT11_MNG_ANTENNA_ID			64	/* 11k antenna id */
+#define DOT11_MNG_RSNI_ID			65	/* 11k RSNI id */
+#define DOT11_MNG_MEASUREMENT_PILOT_TX_ID	66	/* 11k measurement pilot tx info id */
+#define DOT11_MNG_BSS_AVAL_ADMISSION_CAP_ID	67	/* 11k bss aval admission cap id */
+#define DOT11_MNG_BSS_AC_ACCESS_DELAY_ID	68	/* 11k bss AC access delay id */
+#define DOT11_MNG_WAPI_ID			68	/* d11 management WAPI id */
+#define DOT11_MNG_TIME_ADVERTISE_ID	69	/* 11p time advertisement */
+#define DOT11_MNG_RRM_CAP_ID		70	/* 11k radio measurement capability */
+#define DOT11_MNG_MULTIPLE_BSSID_ID		71	/* 11k multiple BSSID id */
+#define	DOT11_MNG_HT_BSS_COEXINFO_ID		72	/* d11 mgmt OBSS Coexistence INFO */
+#define	DOT11_MNG_HT_BSS_CHANNEL_REPORT_ID	73	/* d11 mgmt OBSS Intolerant Channel list */
+#define	DOT11_MNG_HT_OBSS_ID			74	/* d11 mgmt OBSS HT info */
+#define DOT11_MNG_MMIE_ID			76	/* d11 mgmt MIC IE */
+#define DOT11_MNG_FMS_DESCR_ID			86	/* 11v FMS descriptor */
+#define DOT11_MNG_FMS_REQ_ID			87	/* 11v FMS request id */
+#define DOT11_MNG_FMS_RESP_ID			88	/* 11v FMS response id */
+#define DOT11_MNG_BSS_MAX_IDLE_PERIOD_ID	90	/* 11v bss max idle id */
+#define DOT11_MNG_TFS_REQUEST_ID		91	/* 11v tfs request id */
+#define DOT11_MNG_TFS_RESPONSE_ID		92	/* 11v tfs response id */
+#define DOT11_MNG_WNM_SLEEP_MODE_ID		93	/* 11v wnm-sleep mode id */
+#define DOT11_MNG_TIMBC_REQ_ID			94	/* 11v TIM broadcast request id */
+#define DOT11_MNG_TIMBC_RESP_ID			95	/* 11v TIM broadcast response id */
+#define DOT11_MNG_CHANNEL_USAGE			97	/* 11v channel usage */
+#define DOT11_MNG_TIME_ZONE_ID			98	/* 11v time zone */
+#define DOT11_MNG_DMS_REQUEST_ID		99	/* 11v dms request id */
+#define DOT11_MNG_DMS_RESPONSE_ID		100	/* 11v dms response id */
+#define DOT11_MNG_LINK_IDENTIFIER_ID		101	/* 11z TDLS Link Identifier IE */
+#define DOT11_MNG_WAKEUP_SCHEDULE_ID		102	/* 11z TDLS Wakeup Schedule IE */
+#define DOT11_MNG_CHANNEL_SWITCH_TIMING_ID	104	/* 11z TDLS Channel Switch Timing IE */
+#define DOT11_MNG_PTI_CONTROL_ID		105	/* 11z TDLS PTI Control IE */
+#define DOT11_MNG_PU_BUFFER_STATUS_ID	106	/* 11z TDLS PU Buffer Status IE */
+#define DOT11_MNG_INTERWORKING_ID		107	/* 11u interworking */
+#define DOT11_MNG_ADVERTISEMENT_ID		108	/* 11u advertisement protocol */
+#define DOT11_MNG_EXP_BW_REQ_ID			109	/* 11u expedited bandwith request */
+#define DOT11_MNG_QOS_MAP_ID			110	/* 11u QoS map set */
+#define DOT11_MNG_ROAM_CONSORT_ID		111	/* 11u roaming consortium */
+#define DOT11_MNG_EMERGCY_ALERT_ID		112	/* 11u emergency alert identifier */
+#define	DOT11_MNG_EXT_CAP_ID			127	/* d11 mgmt ext capability */
+#define	DOT11_MNG_VHT_CAP_ID			191	/* d11 mgmt VHT cap id */
+#define	DOT11_MNG_VHT_OPERATION_ID		192	/* d11 mgmt VHT op id */
+#define DOT11_MNG_WIDE_BW_CHANNEL_SWITCH_ID		194	/* Wide BW Channel Switch IE */
+#define DOT11_MNG_VHT_TRANSMIT_POWER_ENVELOPE_ID	195	/* VHT transmit Power Envelope IE */
+#define DOT11_MNG_CHANNEL_SWITCH_WRAPPER_ID		196	/* Channel Switch Wrapper IE */
+#define DOT11_MNG_AID_ID					197	/* Association ID  IE */
+#define	DOT11_MNG_OPER_MODE_NOTIF_ID	199	/* d11 mgmt VHT oper mode notif */
+
+
+#define DOT11_MNG_WPA_ID			221	/* d11 management WPA id */
+#define DOT11_MNG_PROPR_ID			221
+/* should start using this one instead of above two */
+#define DOT11_MNG_VS_ID				221	/* d11 management Vendor Specific IE */
+
+/* Rate Defines */
+
+/* Valid rates for the Supported Rates and Extended Supported Rates IEs.
+ * Encoding is the rate in 500kbps units, rouding up for fractional values.
+ * 802.11-2012, section 6.5.5.2, DATA_RATE parameter enumerates all the values.
+ * The rate values cover DSSS, HR/DSSS, ERP, and OFDM phy rates.
+ * The defines below do not cover the rates specific to 10MHz, {3, 4.5, 27},
+ * and 5MHz, {1.5, 2.25, 3, 4.5, 13.5}, which are not supported by Broadcom devices.
+ */
 
 #define DOT11_SC_SUCCESS		0	
 #define DOT11_SC_FAILURE		1	
@@ -1973,26 +2212,28 @@ typedef struct d11cnt {
 	uint32		rxundec;	
 } d11cnt_t;
 
+#define BRCM_PROP_OUI		"\x00\x90\x4C"
 
-#define BRCM_PROP_OUI		"\x00\x90\x4C"	
 
+/* Action frame type for RWL */
+#define RWL_WIFI_DEFAULT		0
+#define RWL_WIFI_FIND_MY_PEER		9 /* Used while finding server */
+#define RWL_WIFI_FOUND_PEER		10 /* Server response to the client  */
+#define RWL_ACTION_WIFI_FRAG_TYPE	85 /* Fragment indicator for receiver */
 
-
-#define BRCM_SYSCAP_WET_TUNNEL	0x0100	
-
+#define BRCM_PROP_OUI		"\x00\x90\x4C"	
 
 #define BRCM_OUI		"\x00\x10\x18"	
 
-
 BWL_PRE_PACKED_STRUCT struct brcm_ie {
-	uint8	id;		
-	uint8	len;		
-	uint8	oui[3];		
-	uint8	ver;		
-	uint8	assoc;		
-	uint8	flags;		
-	uint8	flags1;		
-	uint16	amsdu_mtu_pref;	
+	uint8	id;		/* IE ID, 221, DOT11_MNG_PROPR_ID */
+	uint8	len;		/* IE length */
+	uint8	oui[3];
+	uint8	ver;		/* type/ver of this IE */
+	uint8	assoc;		/* # of assoc STAs */
+	uint8	flags;		/* misc flags */
+	uint8	flags1;		/* misc flags */
+	uint16	amsdu_mtu_pref;	/* preferred A-MSDU MTU */
 } BWL_POST_PACKED_STRUCT;
 typedef	struct brcm_ie brcm_ie_t;
 #define BRCM_IE_LEN		11	
@@ -2043,10 +2284,10 @@ typedef struct ht_cap_ie ht_cap_ie_t;
 
 
 BWL_PRE_PACKED_STRUCT struct ht_prop_cap_ie {
-	uint8	id;		
-	uint8	len;		
-	uint8	oui[3];		
-	uint8	type;           
+	uint8	id;		/* IE ID, 221, DOT11_MNG_PROPR_ID */
+	uint8	len;		/* IE length */
+	uint8	oui[3];
+	uint8	type;           /* type inidicates what follows */
 	ht_cap_ie_t cap_ie;
 } BWL_POST_PACKED_STRUCT;
 typedef struct ht_prop_cap_ie ht_prop_cap_ie_t;
@@ -2132,10 +2373,10 @@ typedef struct ht_add_ie ht_add_ie_t;
 
 
 BWL_PRE_PACKED_STRUCT struct ht_prop_add_ie {
-	uint8	id;		
-	uint8	len;		
-	uint8	oui[3];		
-	uint8	type;		
+	uint8	id;		/* IE ID, 221, DOT11_MNG_PROPR_ID */
+	uint8	len;		/* IE length */
+	uint8	oui[3];
+	uint8	type;		/* indicates what follows */
 	ht_add_ie_t add_ie;
 } BWL_POST_PACKED_STRUCT;
 typedef struct ht_prop_add_ie ht_prop_add_ie_t;
@@ -2367,9 +2608,9 @@ typedef enum vht_op_chan_width {
 
 #define BRCM_VHT_FEATURES_OUITYPE	0x4
 BWL_PRE_PACKED_STRUCT struct vht_features_ie_hdr {
-	uint8 oui[3];		
-	uint8 type;		
-	uint8 rate_mask;	
+	uint8 oui[3];
+	uint8 type;		/* type of this IE = 4 */
+	uint8 rate_mask;	/* VHT rate mask */
 } BWL_POST_PACKED_STRUCT;
 typedef struct vht_features_ie_hdr vht_features_ie_hdr_t;
 
diff --git a/drivers/net/wireless/bcmdhd/include/proto/802.11_bta.h b/drivers/net/wireless/bcmdhd/include/proto/802.11_bta.h
index 3ee5a74..18bb1bc 100644
--- a/drivers/net/wireless/bcmdhd/include/proto/802.11_bta.h
+++ b/drivers/net/wireless/bcmdhd/include/proto/802.11_bta.h
@@ -1,7 +1,7 @@
 /*
  * BT-AMP (BlueTooth Alternate Mac and Phy) 802.11 PAL (Protocol Adaptation Layer)
  *
- * Copyright (C) 1999-2012, Broadcom Corporation
+ * Copyright (C) 1999-2014, Broadcom Corporation
  * 
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/drivers/net/wireless/bcmdhd/include/proto/802.11e.h b/drivers/net/wireless/bcmdhd/include/proto/802.11e.h
index c837f57..6862d32 100644
--- a/drivers/net/wireless/bcmdhd/include/proto/802.11e.h
+++ b/drivers/net/wireless/bcmdhd/include/proto/802.11e.h
@@ -1,7 +1,7 @@
 /*
  * 802.11e protocol header file
  *
- * Copyright (C) 1999-2012, Broadcom Corporation
+ * Copyright (C) 1999-2014, Broadcom Corporation
  * 
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/drivers/net/wireless/bcmdhd/include/proto/802.1d.h b/drivers/net/wireless/bcmdhd/include/proto/802.1d.h
index 116a226..9289d97 100644
--- a/drivers/net/wireless/bcmdhd/include/proto/802.1d.h
+++ b/drivers/net/wireless/bcmdhd/include/proto/802.1d.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 1999-2012, Broadcom Corporation
+ * Copyright (C) 1999-2014, Broadcom Corporation
  * 
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/drivers/net/wireless/bcmdhd/include/proto/802.3.h b/drivers/net/wireless/bcmdhd/include/proto/802.3.h
new file mode 100644
index 0000000..841e6da
--- /dev/null
+++ b/drivers/net/wireless/bcmdhd/include/proto/802.3.h
@@ -0,0 +1,52 @@
+/*
+ * Copyright (C) 1999-2014, Broadcom Corporation
+ * 
+ *      Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ * 
+ *      As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module.  An independent module is a module which is not
+ * derived from this software.  The special exception does not apply to any
+ * modifications of the software.
+ * 
+ *      Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * Fundamental constants relating to 802.3
+ *
+ * $Id: 802.3.h 417943 2013-08-13 07:54:04Z $
+ */
+
+#ifndef _802_3_h_
+#define _802_3_h_
+
+/* This marks the start of a packed structure section. */
+#include <packed_section_start.h>
+
+#define SNAP_HDR_LEN	6	/* 802.3 SNAP header length */
+#define DOT3_OUI_LEN	3	/* 802.3 oui length */
+
+BWL_PRE_PACKED_STRUCT struct dot3_mac_llc_snap_header {
+	uint8	ether_dhost[ETHER_ADDR_LEN];	/* dest mac */
+	uint8	ether_shost[ETHER_ADDR_LEN];	/* src mac */
+	uint16	length;				/* frame length incl header */
+	uint8	dsap;				/* always 0xAA */
+	uint8	ssap;				/* always 0xAA */
+	uint8	ctl;				/* always 0x03 */
+	uint8	oui[DOT3_OUI_LEN];		/* RFC1042: 0x00 0x00 0x00
+						 * Bridge-Tunnel: 0x00 0x00 0xF8
+						 */
+	uint16	type;				/* ethertype */
+} BWL_POST_PACKED_STRUCT;
+
+/* This marks the end of a packed structure section. */
+#include <packed_section_end.h>
+
+#endif	/* #ifndef _802_3_h_ */
diff --git a/drivers/net/wireless/bcmdhd/include/proto/bcmeth.h b/drivers/net/wireless/bcmdhd/include/proto/bcmeth.h
index e54b2e3..c727e3f 100644
--- a/drivers/net/wireless/bcmdhd/include/proto/bcmeth.h
+++ b/drivers/net/wireless/bcmdhd/include/proto/bcmeth.h
@@ -1,7 +1,7 @@
 /*
  * Broadcom Ethernettype  protocol definitions
  *
- * Copyright (C) 1999-2012, Broadcom Corporation
+ * Copyright (C) 1999-2014, Broadcom Corporation
  * 
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/drivers/net/wireless/bcmdhd/include/proto/bcmevent.h b/drivers/net/wireless/bcmdhd/include/proto/bcmevent.h
index 243a975..a28a722 100644
--- a/drivers/net/wireless/bcmdhd/include/proto/bcmevent.h
+++ b/drivers/net/wireless/bcmdhd/include/proto/bcmevent.h
@@ -1,7 +1,7 @@
 /*
  * Broadcom Event  protocol definitions
  *
- * Copyright (C) 1999-2012, Broadcom Corporation
+ * Copyright (C) 1999-2014, Broadcom Corporation
  * 
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/drivers/net/wireless/bcmdhd/include/proto/bcmip.h b/drivers/net/wireless/bcmdhd/include/proto/bcmip.h
index 02ddd37..b6f324f 100644
--- a/drivers/net/wireless/bcmdhd/include/proto/bcmip.h
+++ b/drivers/net/wireless/bcmdhd/include/proto/bcmip.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 1999-2012, Broadcom Corporation
+ * Copyright (C) 1999-2014, Broadcom Corporation
  * 
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/drivers/net/wireless/bcmdhd/include/proto/bcmipv6.h b/drivers/net/wireless/bcmdhd/include/proto/bcmipv6.h
index 9533391..406644b 100644
--- a/drivers/net/wireless/bcmdhd/include/proto/bcmipv6.h
+++ b/drivers/net/wireless/bcmdhd/include/proto/bcmipv6.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 1999-2012, Broadcom Corporation
+ * Copyright (C) 1999-2014, Broadcom Corporation
  * 
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/drivers/net/wireless/bcmdhd/include/proto/bcmtcp.h b/drivers/net/wireless/bcmdhd/include/proto/bcmtcp.h
new file mode 100644
index 0000000..701fd03
--- /dev/null
+++ b/drivers/net/wireless/bcmdhd/include/proto/bcmtcp.h
@@ -0,0 +1,84 @@
+/*
+ * Fundamental constants relating to TCP Protocol
+ *
+ * Copyright (C) 1999-2014, Broadcom Corporation
+ * 
+ *      Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ * 
+ *      As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module.  An independent module is a module which is not
+ * derived from this software.  The special exception does not apply to any
+ * modifications of the software.
+ * 
+ *      Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: bcmtcp.h 434656 2013-11-07 01:11:33Z $
+ */
+
+#ifndef _bcmtcp_h_
+#define _bcmtcp_h_
+
+#ifndef _TYPEDEFS_H_
+#include <typedefs.h>
+#endif
+
+/* This marks the start of a packed structure section. */
+#include <packed_section_start.h>
+
+
+#define TCP_SRC_PORT_OFFSET	0	/* TCP source port offset */
+#define TCP_DEST_PORT_OFFSET	2	/* TCP dest port offset */
+#define TCP_SEQ_NUM_OFFSET	4	/* TCP sequence number offset */
+#define TCP_ACK_NUM_OFFSET	8	/* TCP acknowledgement number offset */
+#define TCP_HLEN_OFFSET		12	/* HLEN and reserved bits offset */
+#define TCP_FLAGS_OFFSET	13	/* FLAGS and reserved bits offset */
+#define TCP_CHKSUM_OFFSET	16	/* TCP body checksum offset */
+
+#define TCP_PORT_LEN		2	/* TCP port field length */
+
+/* 8bit TCP flag field */
+#define TCP_FLAG_URG            0x20
+#define TCP_FLAG_ACK            0x10
+#define TCP_FLAG_PSH            0x08
+#define TCP_FLAG_RST            0x04
+#define TCP_FLAG_SYN            0x02
+#define TCP_FLAG_FIN            0x01
+
+#define TCP_HLEN_MASK           0xf000
+#define TCP_HLEN_SHIFT          12
+
+/* These fields are stored in network order */
+BWL_PRE_PACKED_STRUCT struct bcmtcp_hdr
+{
+	uint16	src_port;	/* Source Port Address */
+	uint16	dst_port;	/* Destination Port Address */
+	uint32	seq_num;	/* TCP Sequence Number */
+	uint32	ack_num;	/* TCP Sequence Number */
+	uint16	hdrlen_rsvd_flags;	/* Header length, reserved bits and flags */
+	uint16	tcpwin;		/* TCP window */
+	uint16	chksum;		/* Segment checksum with pseudoheader */
+	uint16	urg_ptr;	/* Points to seq-num of byte following urg data */
+} BWL_POST_PACKED_STRUCT;
+
+#define TCP_MIN_HEADER_LEN 20
+
+#define TCP_HDRLEN_MASK 0xf0
+#define TCP_HDRLEN_SHIFT 4
+#define TCP_HDRLEN(hdrlen) (((hdrlen) & TCP_HDRLEN_MASK) >> TCP_HDRLEN_SHIFT)
+
+#define TCP_FLAGS_MASK  0x1f
+#define TCP_FLAGS(hdrlen) ((hdrlen) & TCP_FLAGS_MASK)
+
+/* This marks the end of a packed structure section. */
+#include <packed_section_end.h>
+
+#endif	/* #ifndef _bcmtcp_h_ */
diff --git a/drivers/net/wireless/bcmdhd/include/proto/bt_amp_hci.h b/drivers/net/wireless/bcmdhd/include/proto/bt_amp_hci.h
index 8617985..45875d0 100644
--- a/drivers/net/wireless/bcmdhd/include/proto/bt_amp_hci.h
+++ b/drivers/net/wireless/bcmdhd/include/proto/bt_amp_hci.h
@@ -1,7 +1,7 @@
 /*
  * BT-AMP (BlueTooth Alternate Mac and Phy) HCI (Host/Controller Interface)
  *
- * Copyright (C) 1999-2012, Broadcom Corporation
+ * Copyright (C) 1999-2014, Broadcom Corporation
  * 
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/drivers/net/wireless/bcmdhd/include/proto/eapol.h b/drivers/net/wireless/bcmdhd/include/proto/eapol.h
index 8936d16..3f283a6 100644
--- a/drivers/net/wireless/bcmdhd/include/proto/eapol.h
+++ b/drivers/net/wireless/bcmdhd/include/proto/eapol.h
@@ -5,9 +5,9 @@
  * IEEE Std 802.1X-2001
  * IEEE 802.1X RADIUS Usage Guidelines
  *
- * Copyright (C) 2002 Broadcom Corporation
+ * Copyright Open Broadcom Corporation
  *
- * $Id: eapol.h 241182 2011-02-17 21:50:03Z $
+ * $Id: eapol.h 452678 2014-01-31 19:16:29Z $
  */
 
 #ifndef _eapol_h_
diff --git a/drivers/net/wireless/bcmdhd/include/proto/ethernet.h b/drivers/net/wireless/bcmdhd/include/proto/ethernet.h
index 7b9b2e2..72c3dea 100644
--- a/drivers/net/wireless/bcmdhd/include/proto/ethernet.h
+++ b/drivers/net/wireless/bcmdhd/include/proto/ethernet.h
@@ -1,7 +1,7 @@
 /*
  * From FreeBSD 2.2.7: Fundamental constants relating to ethernet.
  *
- * Copyright (C) 1999-2012, Broadcom Corporation
+ * Copyright (C) 1999-2014, Broadcom Corporation
  * 
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/drivers/net/wireless/bcmdhd/include/proto/p2p.h b/drivers/net/wireless/bcmdhd/include/proto/p2p.h
index 8f7652f..ad9390c 100644
--- a/drivers/net/wireless/bcmdhd/include/proto/p2p.h
+++ b/drivers/net/wireless/bcmdhd/include/proto/p2p.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 1999-2012, Broadcom Corporation
+ * Copyright (C) 1999-2014, Broadcom Corporation
  * 
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
@@ -21,7 +21,7 @@
  *
  * Fundamental types and constants relating to WFA P2P (aka WiFi Direct)
  *
- * $Id: p2p.h 356416 2012-09-12 16:40:42Z $
+ * $Id: p2p.h 444066 2013-12-18 12:49:24Z $
  */
 
 #ifndef _P2P_H_
@@ -59,36 +59,36 @@ typedef struct wifi_p2p_ie wifi_p2p_ie_t;
 #define P2P_ATTR_LEN_OFF	1
 #define P2P_ATTR_DATA_OFF	3
 
-#define P2P_ATTR_ID_LEN		1	
-#define P2P_ATTR_LEN_LEN	2	
-#define P2P_ATTR_HDR_LEN	3 
-
-
-#define P2P_SEID_STATUS			0	
-#define P2P_SEID_MINOR_RC		1	
-#define P2P_SEID_P2P_INFO		2	
-#define P2P_SEID_DEV_ID			3	
-#define P2P_SEID_INTENT			4	
-#define P2P_SEID_CFG_TIMEOUT		5	
-#define P2P_SEID_CHANNEL		6	
-#define P2P_SEID_GRP_BSSID		7	
-#define P2P_SEID_XT_TIMING		8	
-#define P2P_SEID_INTINTADDR		9	
-#define P2P_SEID_P2P_MGBTY		10	
-#define P2P_SEID_CHAN_LIST		11	
-#define P2P_SEID_ABSENCE		12	
-#define P2P_SEID_DEV_INFO		13	
-#define P2P_SEID_GROUP_INFO		14	
-#define P2P_SEID_GROUP_ID		15	
-#define P2P_SEID_P2P_IF			16	
-#define P2P_SEID_OP_CHANNEL		17	
-#define P2P_SEID_INVITE_FLAGS		18	
-#define P2P_SEID_VNDR			221	
-
-#define P2P_SE_VS_ID_SERVICES	0x1b 
-
-
-
+#define P2P_ATTR_ID_LEN		1	/* ID filed length */
+#define P2P_ATTR_LEN_LEN	2	/* length field length */
+#define P2P_ATTR_HDR_LEN	3 /* ID + 2-byte length field spec 1.02 */
+
+/* P2P IE Subelement IDs from WiFi P2P Technical Spec 1.00 */
+#define P2P_SEID_STATUS			0	/* Status */
+#define P2P_SEID_MINOR_RC		1	/* Minor Reason Code */
+#define P2P_SEID_P2P_INFO		2	/* P2P Capability (capabilities info) */
+#define P2P_SEID_DEV_ID			3	/* P2P Device ID */
+#define P2P_SEID_INTENT			4	/* Group Owner Intent */
+#define P2P_SEID_CFG_TIMEOUT		5	/* Configuration Timeout */
+#define P2P_SEID_CHANNEL		6	/* Listen channel */
+#define P2P_SEID_GRP_BSSID		7	/* P2P Group BSSID */
+#define P2P_SEID_XT_TIMING		8	/* Extended Listen Timing */
+#define P2P_SEID_INTINTADDR		9	/* Intended P2P Interface Address */
+#define P2P_SEID_P2P_MGBTY		10	/* P2P Manageability */
+#define P2P_SEID_CHAN_LIST		11	/* Channel List */
+#define P2P_SEID_ABSENCE		12	/* Notice of Absence */
+#define P2P_SEID_DEV_INFO		13	/* Device Info */
+#define P2P_SEID_GROUP_INFO		14	/* Group Info */
+#define P2P_SEID_GROUP_ID		15	/* Group ID */
+#define P2P_SEID_P2P_IF			16	/* P2P Interface */
+#define P2P_SEID_OP_CHANNEL		17	/* Operating Channel */
+#define P2P_SEID_INVITE_FLAGS		18	/* Invitation Flags */
+#define P2P_SEID_VNDR			221	/* Vendor-specific subelement */
+
+#define P2P_SE_VS_ID_SERVICES	0x1b
+
+
+/* WiFi P2P IE subelement: P2P Capability (capabilities info) */
 BWL_PRE_PACKED_STRUCT struct wifi_p2p_info_se_s {
 	uint8	eltId;		
 	uint8	len[2];		
diff --git a/drivers/net/wireless/bcmdhd/include/proto/sdspi.h b/drivers/net/wireless/bcmdhd/include/proto/sdspi.h
index a4900ed..adca280 100644
--- a/drivers/net/wireless/bcmdhd/include/proto/sdspi.h
+++ b/drivers/net/wireless/bcmdhd/include/proto/sdspi.h
@@ -1,7 +1,7 @@
 /*
  * SD-SPI Protocol Standard
  *
- * Copyright (C) 1999-2012, Broadcom Corporation
+ * Copyright (C) 1999-2014, Broadcom Corporation
  * 
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/drivers/net/wireless/bcmdhd/include/proto/vlan.h b/drivers/net/wireless/bcmdhd/include/proto/vlan.h
index 2eb4832..12044c2 100644
--- a/drivers/net/wireless/bcmdhd/include/proto/vlan.h
+++ b/drivers/net/wireless/bcmdhd/include/proto/vlan.h
@@ -1,7 +1,7 @@
 /*
  * 802.1Q VLAN protocol definitions
  *
- * Copyright (C) 1999-2012, Broadcom Corporation
+ * Copyright (C) 1999-2014, Broadcom Corporation
  * 
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/drivers/net/wireless/bcmdhd/include/proto/wpa.h b/drivers/net/wireless/bcmdhd/include/proto/wpa.h
index 7ebeeda..255a481 100644
--- a/drivers/net/wireless/bcmdhd/include/proto/wpa.h
+++ b/drivers/net/wireless/bcmdhd/include/proto/wpa.h
@@ -1,7 +1,7 @@
 /*
  * Fundamental types and constants relating to WPA
  *
- * Copyright (C) 1999-2012, Broadcom Corporation
+ * Copyright (C) 1999-2014, Broadcom Corporation
  * 
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/drivers/net/wireless/bcmdhd/include/proto/wps.h b/drivers/net/wireless/bcmdhd/include/proto/wps.h
index cccbfff..306d554 100644
--- a/drivers/net/wireless/bcmdhd/include/proto/wps.h
+++ b/drivers/net/wireless/bcmdhd/include/proto/wps.h
@@ -1,7 +1,7 @@
 /*
  * WPS IE definitions
  *
- * Copyright (C) 1999-2012, Broadcom Corporation
+ * Copyright (C) 1999-2014, Broadcom Corporation
  * 
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/drivers/net/wireless/bcmdhd/wl_cfg80211.c b/drivers/net/wireless/bcmdhd/wl_cfg80211.c
index c205695..ac7dcd5 100644
--- a/drivers/net/wireless/bcmdhd/wl_cfg80211.c
+++ b/drivers/net/wireless/bcmdhd/wl_cfg80211.c
@@ -4626,6 +4626,45 @@ wl_cfg80211_config_p2p_pub_af_tx(struct wiphy *wiphy,
 	return err;
 }
 
+#ifdef WL11U
+static bool
+wl_cfg80211_check_DFS_channel(struct bcm_cfg80211 *cfg, wl_af_params_t *af_params,
+	void *frame, u16 frame_len)
+{
+	struct wl_scan_results *bss_list;
+	struct wl_bss_info *bi = NULL;
+	bool result = false;
+	s32 i;
+	chanspec_t chanspec;
+
+	/* If DFS channel is 52~148, check to block it or not */
+	WL_DBG(("af_params->channel=%d\n", af_params->channel));
+	if (af_params &&
+		(af_params->channel >= 52 && af_params->channel <= 148)) {
+		if (!wl_cfgp2p_is_p2p_action(frame, frame_len)) {
+			WL_DBG(("non p2p action frame\n"));
+			bss_list = cfg->bss_list;
+			bi = next_bss(bss_list, bi);
+			for_each_bss(bss_list, bi, i) {
+				chanspec = wl_chspec_driver_to_host(bi->chanspec);
+				WL_DBG(("bi->chanspec=%d, chanspec=%d\n", bi->chanspec, chanspec));
+				if (CHSPEC_IS5G(chanspec) &&
+					((bi->ctl_ch ? bi->ctl_ch : CHSPEC_CHANNEL(chanspec))
+					== af_params->channel)) {
+					result = true;	/* do not block the action frame */
+					break;
+				}
+			}
+		}
+	}
+	else {
+		result = true;
+	}
+
+	WL_DBG(("result=%s", result?"true":"false"));
+	return result;
+}
+#endif /* WL11U */
 
 static bool
 wl_cfg80211_send_action_frame(struct wiphy *wiphy, struct net_device *dev,
@@ -8525,9 +8564,30 @@ wl_cfg80211_netdev_notifier_call(struct notifier_block * nb,
 		return NOTIFY_DONE;
 	switch (state) {
 		case NETDEV_DOWN:
-			while (work_pending(&wdev->cleanup_work) && refcnt < 100) {
-				if (refcnt%5 == 0)
-					WL_ERR(("[NETDEV_DOWN] work_pending (%d th)\n", refcnt));
+		{
+			int max_wait_timeout = 5;
+			int max_wait_count = 100;
+			unsigned long limit = jiffies + max_wait_timeout * HZ;
+			while (work_pending(&wdev->cleanup_work)) {
+				if (refcnt%5 == 0) {
+					WL_ERR(("[NETDEV_DOWN] wait for "
+						"complete of cleanup_work"
+						" (%d th)\n", refcnt));
+				}
+				if (!time_before(jiffies, limit)) {
+					WL_ERR(("[NETDEV_DOWN] cleanup_work"
+						" of CFG80211 is not"
+						" completed in %d sec\n",
+						max_wait_timeout));
+					break;
+				}
+				if (refcnt >= max_wait_count) {
+					WL_ERR(("[NETDEV_DOWN] cleanup_work"
+						" of CFG80211 is not"
+						" completed in %d loop\n",
+						max_wait_count));
+					break;
+				}
 				set_current_state(TASK_INTERRUPTIBLE);
 				schedule_timeout(100);
 				set_current_state(TASK_RUNNING);
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index f53ba4e..439bdad 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -4565,10 +4565,12 @@ static int nl80211_crypto_settings(struct cfg80211_registered_device *rdev,
 		if (len % sizeof(u32))
 			return -EINVAL;
 
-		if (settings->n_akm_suites > NL80211_MAX_NR_AKM_SUITES)
-			return -EINVAL;
-
 		memcpy(settings->akm_suites, data, len);
+#if 0 /* Below codes to validate AKM suites are not valid over the Linux Kernel ver 3.8 */
+		for (i = 0; i < settings->n_akm_suites; i++)
+			if (!nl80211_valid_akm_suite(settings->akm_suites[i]))
+				return -EINVAL;
+#endif
 	}
 
 	return 0;
diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index 16fc437..ce793bd 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -17,7 +17,7 @@
 #include "nl80211.h"
 #include "wext-compat.h"
 
-#define IEEE80211_SCAN_RESULT_EXPIRE	(3 * HZ)
+#define IEEE80211_SCAN_RESULT_EXPIRE	(6 * HZ)
 
 void ___cfg80211_scan_done(struct cfg80211_registered_device *rdev, bool leak)
 {
@@ -330,8 +330,14 @@ static int cmp_bss(struct cfg80211_bss *a,
 {
 	int r;
 
+#if !(defined(CONFIG_BCM4335) || defined(CONFIG_BCM4335_MODULE) \
+        || defined(CONFIG_BCM4339) || defined(CONFIG_BCM4339_MODULE) \
+        || defined(CONFIG_BCM4354) || defined(CONFIG_BCM4354_MODULE) \
+        || defined(CONFIG_BCM4356) || defined(CONFIG_BCM4356_MODULE) \
+        || defined(CONFIG_BCM4358) || defined(CONFIG_BCM4358_MODULE))
 	if (a->channel != b->channel)
 		return b->channel->center_freq - a->channel->center_freq;
+#endif /* CONFIG_BCM43xx */
 
 	if (is_mesh_bss(a) && is_mesh_bss(b)) {
 		r = cmp_ies(WLAN_EID_MESH_ID,
@@ -352,6 +358,15 @@ static int cmp_bss(struct cfg80211_bss *a,
 	if (r)
 		return r;
 
+#if (defined(CONFIG_BCM4335) || defined(CONFIG_BCM4335_MODULE) \
+        || defined(CONFIG_BCM4339) || defined(CONFIG_BCM4339_MODULE) \
+        || defined(CONFIG_BCM4354) || defined(CONFIG_BCM4354_MODULE) \
+        || defined(CONFIG_BCM4356) || defined(CONFIG_BCM4356_MODULE) \
+        || defined(CONFIG_BCM4358) || defined(CONFIG_BCM4358_MODULE))
+	if (a->channel != b->channel)
+		return b->channel->center_freq - a->channel->center_freq;
+#endif /* CONFIG_BCM43xx */
+
 	return cmp_ies(WLAN_EID_SSID,
 		       a->information_elements,
 		       a->len_information_elements,