diff options
author | Randy Dunlap <randy.dunlap@oracle.com> | 2008-11-13 21:33:24 +0000 |
---|---|---|
committer | Randy Dunlap <randy.dunlap@oracle.com> | 2008-11-14 17:28:53 +0000 |
commit | 31c00fc15ebd35c1647775dbfc167a15d46657fd (patch) | |
tree | 6d8ff2a6607c94a791ccc56fd8eb625e4fdcc01a /Documentation/digiepca.txt | |
parent | 3edac25f2e8ac8c2a84904c140e1aeb434e73e75 (diff) | |
download | kernel_samsung_smdk4412-31c00fc15ebd35c1647775dbfc167a15d46657fd.zip kernel_samsung_smdk4412-31c00fc15ebd35c1647775dbfc167a15d46657fd.tar.gz kernel_samsung_smdk4412-31c00fc15ebd35c1647775dbfc167a15d46657fd.tar.bz2 |
Create/use more directory structure in the Documentation/ tree.
Create Documentation/blockdev/ sub-directory and populate it.
Populate the Documentation/serial/ sub-directory.
Move MSI-HOWTO.txt to Documentation/PCI/.
Move ioctl-number.txt to Documentation/ioctl/.
Update all relevant 00-INDEX files.
Update all relevant Kconfig files and source files.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Diffstat (limited to 'Documentation/digiepca.txt')
-rw-r--r-- | Documentation/digiepca.txt | 98 |
1 files changed, 0 insertions, 98 deletions
diff --git a/Documentation/digiepca.txt b/Documentation/digiepca.txt deleted file mode 100644 index f2560e2..0000000 --- a/Documentation/digiepca.txt +++ /dev/null @@ -1,98 +0,0 @@ -NOTE: This driver is obsolete. Digi provides a 2.6 driver (dgdm) at -http://www.digi.com for PCI cards. They no longer maintain this driver, -and have no 2.6 driver for ISA cards. - -This driver requires a number of user-space tools. They can be acquired from -http://www.digi.com, but only works with 2.4 kernels. - - -The Digi Intl. epca driver. ----------------------------- -The Digi Intl. epca driver for Linux supports the following boards: - -Digi PC/Xem, PC/Xr, PC/Xe, PC/Xi, PC/Xeve -Digi EISA/Xem, PCI/Xem, PCI/Xr - -Limitations: ------------- -Currently the driver only autoprobes for supported PCI boards. - -The Linux MAKEDEV command does not support generating the Digiboard -Devices. Users executing digiConfig to setup EISA and PC series cards -will have their device nodes automatically constructed (cud?? for ~CLOCAL, -and ttyD?? for CLOCAL). Users wishing to boot their board from the LILO -prompt, or those users booting PCI cards may use buildDIGI to construct -the necessary nodes. - -Notes: ------- -This driver may be configured via LILO. For users who have already configured -their driver using digiConfig, configuring from LILO will override previous -settings. Multiple boards may be configured by issuing multiple LILO command -lines. For examples see the bottom of this document. - -Device names start at 0 and continue up. Beware of this as previous Digi -drivers started device names with 1. - -PCI boards are auto-detected and configured by the driver. PCI boards will -be allocated device numbers (internally) beginning with the lowest PCI slot -first. In other words a PCI card in slot 3 will always have higher device -nodes than a PCI card in slot 1. - -LILO config examples: ---------------------- -Using LILO's APPEND command, a string of comma separated identifiers or -integers can be used to configure supported boards. The six values in order -are: - - Enable/Disable this card or Override, - Type of card: PC/Xe (AccelePort) (0), PC/Xeve (1), PC/Xem or PC/Xr (2), - EISA/Xem (3), PC/64Xe (4), PC/Xi (5), - Enable/Disable alternate pin arrangement, - Number of ports on this card, - I/O Port where card is configured (in HEX if using string identifiers), - Base of memory window (in HEX if using string identifiers), - -NOTE : PCI boards are auto-detected and configured. Do not attempt to -configure PCI boards with the LILO append command. If you wish to override -previous configuration data (As set by digiConfig), but you do not wish to -configure any specific card (Example if there are PCI cards in the system) -the following override command will accomplish this: --> append="digi=2" - -Samples: - append="digiepca=E,PC/Xe,D,16,200,D0000" - or - append="digi=1,0,0,16,512,851968" - -Supporting Tools: ------------------ -Supporting tools include digiDload, digiConfig, buildPCI, and ditty. See -drivers/char/README.epca for more details. Note, -this driver REQUIRES that digiDload be executed prior to it being used. -Failure to do this will result in an ENODEV error. - -Documentation: --------------- -Complete documentation for this product may be found in the tool package. - -Sources of information and support: ------------------------------------ -Digi Intl. support site for this product: - --> http://www.digi.com - -Acknowledgments: ----------------- -Much of this work (And even text) was derived from a similar document -supporting the original public domain DigiBoard driver Copyright (C) -1994,1995 Troy De Jongh. Many thanks to Christoph Lameter -(christoph@lameter.com) and Mike McLagan (mike.mclagan@linux.org) who authored -and contributed to the original document. - -Changelog: ----------- -10-29-04: Update status of driver, remove dead links in document - James Nelson <james4765@gmail.com> - -2000 (?) Original Document |