tree-wide: fix comment/printk typos

"gadget", "through", "command", "maintain", "maintain", "controller", "address",
"between", "initiali[zs]e", "instead", "function", "select", "already",
"equal", "access", "management", "hierarchy", "registration", "interest",
"relative", "memory", "offset", "already",

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

26 files changed, 33 insertions, 33 deletions

diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c
index 1bec96e..60dc077 100644
--- a/arch/arm/common/it8152.c
+++ b/arch/arm/common/it8152.c
@@ -236,7 +236,7 @@ static struct resource it8152_mem = {
 
 /*
  * The following functions are needed for DMA bouncing.
- * ITE8152 chip can addrees up to 64MByte, so all the devices
+ * ITE8152 chip can address up to 64MByte, so all the devices
  * connected to ITE8152 (PCI and USB) should have limited DMA window
  */
 
diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index ba65f6e..cb660bc 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -70,7 +70,7 @@ static inline struct vic_device *to_vic(struct sys_device *sys)
  * vic_init2 - common initialisation code
  * @base: Base of the VIC.
  *
- * Common initialisation code for registeration
+ * Common initialisation code for registration
  * and resume.
 */
 static void vic_init2(void __iomem *base)
diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
index 7b58c94..de2fd04 100644
--- a/arch/arm/mach-at91/board-ecbat91.c
+++ b/arch/arm/mach-at91/board-ecbat91.c
@@ -128,17 +128,17 @@ static struct spi_board_info __initdata ecb_at91spi_devices[] = {
 		.platform_data	= &my_flash0_platform,
 #endif
 	},
-	{	/* User accessable spi - cs1 (250KHz) */
+	{	/* User accessible spi - cs1 (250KHz) */
 		.modalias	= "spi-cs1",
 		.chip_select	= 1,
 		.max_speed_hz	= 250 * 1000,
 	},
-	{	/* User accessable spi - cs2 (1MHz) */
+	{	/* User accessible spi - cs2 (1MHz) */
 		.modalias	= "spi-cs2",
 		.chip_select	= 2,
 		.max_speed_hz	= 1 * 1000 * 1000,
 	},
-	{	/* User accessable spi - cs3 (10MHz) */
+	{	/* User accessible spi - cs3 (10MHz) */
 		.modalias	= "spi-cs3",
 		.chip_select	= 3,
 		.max_speed_hz	= 10 * 1000 * 1000,
diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw.c
index b3a61d8..96273ff 100644
--- a/arch/arm/mach-bcmring/csp/chipc/chipcHw.c
+++ b/arch/arm/mach-bcmring/csp/chipc/chipcHw.c
@@ -757,7 +757,7 @@ static int chipcHw_divide(int num, int denom)
 		t = t << 1;
 	}
 
-	/* Intialize the result */
+	/* Initialize the result */
 	r = 0;
 
 	do {
diff --git a/arch/arm/mach-bcmring/csp/dmac/dmacHw.c b/arch/arm/mach-bcmring/csp/dmac/dmacHw.c
index 7b9bac2..6b9be2e 100644
--- a/arch/arm/mach-bcmring/csp/dmac/dmacHw.c
+++ b/arch/arm/mach-bcmring/csp/dmac/dmacHw.c
@@ -893,7 +893,7 @@ int dmacHw_setDataDescriptor(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration
 */
 /****************************************************************************/
 uint32_t dmacHw_getDmaControllerAttribute(dmacHw_HANDLE_t handle,	/*  [ IN ]  DMA Channel handle */
-					  dmacHw_CONTROLLER_ATTRIB_e attr	/*  [ IN ]  DMA Controler attribute of type  dmacHw_CONTROLLER_ATTRIB_e */
+					  dmacHw_CONTROLLER_ATTRIB_e attr	/*  [ IN ]  DMA Controller attribute of type  dmacHw_CONTROLLER_ATTRIB_e */
     ) {
 	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
 
diff --git a/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c
index ff7b436..77f84b4 100644
--- a/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c
+++ b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c
@@ -316,7 +316,7 @@ static void DisplayDescRing(void *pDescriptor,	/*   [ IN ] Descriptor buffer */
 /**
 *  @brief   Check if DMA channel is the flow controller
 *
-*  @return  1 : If DMA is a flow controler
+*  @return  1 : If DMA is a flow controller
 *           0 : Peripheral is the flow controller
 *
 *  @note
diff --git a/arch/arm/mach-bcmring/csp/tmr/tmrHw.c b/arch/arm/mach-bcmring/csp/tmr/tmrHw.c
index 5c1c9a0..16225e4 100644
--- a/arch/arm/mach-bcmring/csp/tmr/tmrHw.c
+++ b/arch/arm/mach-bcmring/csp/tmr/tmrHw.c
@@ -558,7 +558,7 @@ static int tmrHw_divide(int num, int denom)
 		t = t << 1;
 	}
 
-	/* Intialize the result */
+	/* Initialize the result */
 	r = 0;
 
 	do {
diff --git a/arch/arm/mach-bcmring/dma.c b/arch/arm/mach-bcmring/dma.c
index 77eb35c..8d1baf3 100644
--- a/arch/arm/mach-bcmring/dma.c
+++ b/arch/arm/mach-bcmring/dma.c
@@ -671,7 +671,7 @@ static int ConfigChannel(DMA_Handle_t handle)
 
 /****************************************************************************/
 /**
-*   Intializes all of the data structures associated with the DMA.
+*   Initializes all of the data structures associated with the DMA.
 *   @return
 *       >= 0    - Initialization was successfull.
 *
diff --git a/arch/arm/mach-bcmring/include/csp/dmacHw.h b/arch/arm/mach-bcmring/include/csp/dmacHw.h
index 5d51013..6c8da2b 100644
--- a/arch/arm/mach-bcmring/include/csp/dmacHw.h
+++ b/arch/arm/mach-bcmring/include/csp/dmacHw.h
@@ -590,7 +590,7 @@ void dmacHw_printDebugInfo(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle
 */
 /****************************************************************************/
 uint32_t dmacHw_getDmaControllerAttribute(dmacHw_HANDLE_t handle,	/*  [ IN ]  DMA Channel handle  */
-					  dmacHw_CONTROLLER_ATTRIB_e attr	/*  [ IN ]  DMA Controler attribute of type  dmacHw_CONTROLLER_ATTRIB_e */
+					  dmacHw_CONTROLLER_ATTRIB_e attr	/*  [ IN ]  DMA Controller attribute of type  dmacHw_CONTROLLER_ATTRIB_e */
     );
 
 #endif /* _DMACHW_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
index cbf334d..d67e2f8 100644
--- a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
+++ b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
@@ -28,7 +28,7 @@
 
 /* Data type for DMA Link List Item */
 typedef struct {
-	uint32_t sar;		/* Source Adress Register.
+	uint32_t sar;		/* Source Address Register.
 				   Address must be aligned to CTLx.SRC_TR_WIDTH.             */
 	uint32_t dar;		/* Destination Address Register.
 				   Address must be aligned to CTLx.DST_TR_WIDTH.             */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h
index 891cea8..f1ecf96 100644
--- a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h
+++ b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h
@@ -35,7 +35,7 @@ typedef struct {
 
 /* Data type representing DMA channel registers */
 typedef struct {
-	dmacHw_REG64_t ChannelSar;	/*  Source Adress Register. 64 bits (upper 32 bits are reserved)
+	dmacHw_REG64_t ChannelSar;	/*  Source Address Register. 64 bits (upper 32 bits are reserved)
 					   Address must be aligned to CTLx.SRC_TR_WIDTH.
 					 */
 	dmacHw_REG64_t ChannelDar;	/*  Destination Address Register.64 bits (upper 32 bits are reserved)
diff --git a/arch/arm/mach-gemini/include/mach/hardware.h b/arch/arm/mach-gemini/include/mach/hardware.h
index 213a4fc..8c950e1 100644
--- a/arch/arm/mach-gemini/include/mach/hardware.h
+++ b/arch/arm/mach-gemini/include/mach/hardware.h
@@ -33,7 +33,7 @@
 #define GEMINI_LPC_HOST_BASE	0x47000000
 #define GEMINI_LPC_IO_BASE	0x47800000
 #define GEMINI_INTERRUPT_BASE	0x48000000
-/* TODO: Different interrupt controlers when SMP
+/* TODO: Different interrupt controllers when SMP
  * #define GEMINI_INTERRUPT0_BASE	0x48000000
  * #define GEMINI_INTERRUPT1_BASE	0x49000000
  */
diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c
index d36b610..7f8d15d 100644
--- a/arch/arm/mach-msm/io.c
+++ b/arch/arm/mach-msm/io.c
@@ -153,7 +153,7 @@ __msm_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype)
 {
 	if (mtype == MT_DEVICE) {
 		/* The peripherals in the 88000000 - D0000000 range
-		 * are only accessable by type MT_DEVICE_NONSHARED.
+		 * are only accessible by type MT_DEVICE_NONSHARED.
 		 * Adjust mtype as necessary to make this "just work."
 		 */
 		if ((phys_addr >= 0x88000000) && (phys_addr < 0xD0000000))
diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c
index 0d50b45..1e6fe6d 100644
--- a/arch/arm/mach-omap2/cpuidle34xx.c
+++ b/arch/arm/mach-omap2/cpuidle34xx.c
@@ -252,7 +252,7 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev,
 	 * FIXME: we currently manage device-specific idle states
 	 *        for PER and CORE in combination with CPU-specific
 	 *        idle states.  This is wrong, and device-specific
-	 *        idle managment needs to be separated out into 
+	 *        idle management needs to be separated out into 
 	 *        its own code.
 	 */
 
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index becf0e3..db79ac6 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -843,7 +843,7 @@ void __init omap_serial_init_port(int port)
 }
 
 /**
- * omap_serial_init() - intialize all supported serial ports
+ * omap_serial_init() - initialize all supported serial ports
  *
  * Initializes all available UARTs as serial ports. Platforms
  * can call this function when they want to have default behaviour
diff --git a/arch/arm/mach-pxa/mxm8x10.c b/arch/arm/mach-pxa/mxm8x10.c
index 462167a..cdf7f41 100644
--- a/arch/arm/mach-pxa/mxm8x10.c
+++ b/arch/arm/mach-pxa/mxm8x10.c
@@ -337,7 +337,7 @@ void __init mxm_8x10_mmc_init(void)
 }
 #endif
 
-/* USB Open Host Controler Interface */
+/* USB Open Host Controller Interface */
 static struct pxaohci_platform_data mxm_8x10_ohci_platform_data = {
 	.port_mode = PMM_NPS_MODE,
 	.flags = ENABLE_PORT_ALL
diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c
index e7d03ab..372ea68 100644
--- a/arch/arm/mach-s3c64xx/dma.c
+++ b/arch/arm/mach-s3c64xx/dma.c
@@ -740,7 +740,7 @@ static int __init s3c64xx_dma_init(void)
 	/* Set all DMA configuration to be DMA, not SDMA */
 	writel(0xffffff, S3C_SYSREG(0x110));
 
-	/* Register standard DMA controlers */
+	/* Register standard DMA controllers */
 	s3c64xx_dma_init1(0, DMACH_UART0, IRQ_DMA0, 0x75000000);
 	s3c64xx_dma_init1(8, DMACH_PCM1_TX, IRQ_DMA1, 0x75100000);
 
diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c
index 3560f8c..5aa2d54 100644
--- a/arch/arm/mach-spear3xx/spear300.c
+++ b/arch/arm/mach-spear3xx/spear300.c
@@ -371,7 +371,7 @@ struct pmx_driver pmx_driver = {
 };
 
 /* Add spear300 specific devices here */
-/* arm gpio1 device registeration */
+/* arm gpio1 device registration */
 static struct pl061_platform_data gpio1_plat_data = {
 	.gpio_base	= 8,
 	.irq_base	= SPEAR_GPIO1_INT_BASE,
@@ -451,7 +451,7 @@ void __init spear300_init(void)
 	/* call spear3xx family common init function */
 	spear3xx_init();
 
-	/* shared irq registeration */
+	/* shared irq registration */
 	shirq_ras1.regs.base =
 		ioremap(SPEAR300_TELECOM_BASE, SPEAR300_TELECOM_REG_SIZE);
 	if (shirq_ras1.regs.base) {
diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c
index 96a1ab8..53b41b5 100644
--- a/arch/arm/mach-spear3xx/spear310.c
+++ b/arch/arm/mach-spear3xx/spear310.c
@@ -266,7 +266,7 @@ void __init spear310_init(void)
 	/* call spear3xx family common init function */
 	spear3xx_init();
 
-	/* shared irq registeration */
+	/* shared irq registration */
 	base = ioremap(SPEAR310_SOC_CONFIG_BASE, SPEAR310_SOC_CONFIG_SIZE);
 	if (base) {
 		/* shirq 1 */
diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c
index 6a12195..88b4652 100644
--- a/arch/arm/mach-spear3xx/spear320.c
+++ b/arch/arm/mach-spear3xx/spear320.c
@@ -519,7 +519,7 @@ void __init spear320_init(void)
 	/* call spear3xx family common init function */
 	spear3xx_init();
 
-	/* shared irq registeration */
+	/* shared irq registration */
 	base = ioremap(SPEAR320_SOC_CONFIG_BASE, SPEAR320_SOC_CONFIG_SIZE);
 	if (base) {
 		/* shirq 1 */
diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c
index e87313a..52f553c 100644
--- a/arch/arm/mach-spear3xx/spear3xx.c
+++ b/arch/arm/mach-spear3xx/spear3xx.c
@@ -22,7 +22,7 @@
 #include <mach/spear.h>
 
 /* Add spear3xx machines common devices here */
-/* gpio device registeration */
+/* gpio device registration */
 static struct pl061_platform_data gpio_plat_data = {
 	.gpio_base	= 0,
 	.irq_base	= SPEAR_GPIO_INT_BASE,
@@ -41,7 +41,7 @@ struct amba_device gpio_device = {
 	.irq = {IRQ_BASIC_GPIO, NO_IRQ},
 };
 
-/* uart device registeration */
+/* uart device registration */
 struct amba_device uart_device = {
 	.dev = {
 		.init_name = "uart",
@@ -543,6 +543,6 @@ void spear_pmx_init(struct pmx_driver *pmx_driver, uint base, uint size)
 
 pmx_fail:
 	if (ret)
-		printk(KERN_ERR "padmux: registeration failed. err no: %d\n",
+		printk(KERN_ERR "padmux: registration failed. err no: %d\n",
 				ret);
 }
diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c
index baf6bcc..f2fe14e 100644
--- a/arch/arm/mach-spear6xx/spear6xx.c
+++ b/arch/arm/mach-spear6xx/spear6xx.c
@@ -23,7 +23,7 @@
 #include <mach/spear.h>
 
 /* Add spear6xx machines common devices here */
-/* uart device registeration */
+/* uart device registration */
 struct amba_device uart_device[] = {
 	{
 		.dev = {
@@ -50,7 +50,7 @@ struct amba_device uart_device[] = {
 	}
 };
 
-/* gpio device registeration */
+/* gpio device registration */
 static struct pl061_platform_data gpio_plat_data[] = {
 	{
 		.gpio_base	= 0,
diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig
index 801b21e..32a7b0f 100644
--- a/arch/arm/mach-u300/Kconfig
+++ b/arch/arm/mach-u300/Kconfig
@@ -64,7 +64,7 @@ config MACH_U300_DUAL_RAM
 	bool "Dual RAM"
 	help
 		Select this if you want support for Dual RAM phones.
-		This is two RAM memorys on different EMIFs.
+		This is two RAM memories on different EMIFs.
 endchoice
 
 config U300_DEBUG
diff --git a/arch/arm/mach-u300/include/mach/coh901318.h b/arch/arm/mach-u300/include/mach/coh901318.h
index 193da2d..6193aaa 100644
--- a/arch/arm/mach-u300/include/mach/coh901318.h
+++ b/arch/arm/mach-u300/include/mach/coh901318.h
@@ -24,7 +24,7 @@
  * @src_addr: transfer source address
  * @dst_addr: transfer destination address
  * @link_addr:  physical address to next lli
- * @virt_link_addr: virtual addres of next lli (only used by pool_free)
+ * @virt_link_addr: virtual address of next lli (only used by pool_free)
  * @phy_this: physical address of current lli (only used by pool_free)
  */
 struct coh901318_lli {
@@ -90,7 +90,7 @@ struct powersave {
  * struct coh901318_platform - platform arch structure
  * @chans_slave: specifying dma slave channels
  * @chans_memcpy: specifying dma memcpy channels
- * @access_memory_state: requesting DMA memeory access (on / off)
+ * @access_memory_state: requesting DMA memory access (on / off)
  * @chan_conf: dma channel configurations
  * @max_channels: max number of dma chanenls
  */
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index 86781f7..664c453 100644
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -66,7 +66,7 @@ extern int imx_irq_set_priority(unsigned char irq, unsigned char prio);
 
 /* all normal IRQs can be FIQs */
 #define FIQ_START	0
-/* switch betwean IRQ and FIQ */
+/* switch between IRQ and FIQ */
 extern int mxc_set_irq_fiq(unsigned int irq, unsigned int type);
 
 #endif /* __ASM_ARCH_MXC_IRQS_H__ */
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 7eaa8ed..79ac24c 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -339,7 +339,7 @@ struct omap_hwmod_omap2_prcm {
 /**
  * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data
  * @clkctrl_reg: PRCM address of the clock control register
- * @rstctrl_reg: adress of the XXX_RSTCTRL register located in the PRM
+ * @rstctrl_reg: address of the XXX_RSTCTRL register located in the PRM
  * @submodule_wkdep_bit: bit shift of the WKDEP range
  */
 struct omap_hwmod_omap4_prcm {