Merge master.kernel.org:/home/rmk/linux-2.6-arm

4 files changed, 40 insertions, 20 deletions

diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c
index cfd0d3e..688a595 100644
--- a/arch/arm/common/scoop.c
+++ b/arch/arm/common/scoop.c
@@ -17,6 +17,12 @@
 
 #define SCOOP_REG(d,adr) (*(volatile unsigned short*)(d +(adr)))
 
+/* PCMCIA to Scoop linkage structures for pxa2xx_sharpsl.c
+   There is no easy way to link multiple scoop devices into one
+   single entity for the pxa2xx_pcmcia device */
+int scoop_num;
+struct scoop_pcmcia_dev *scoop_devs;
+
 struct  scoop_dev {
 	void  *base;
 	spinlock_t scoop_lock;
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 86b862f..06ea730 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -60,6 +60,15 @@ static struct scoop_config corgi_scoop_setup = {
 	.io_out		= CORGI_SCOOP_IO_OUT,
 };
 
+static struct scoop_pcmcia_dev corgi_pcmcia_scoop[] = {
+{
+	.dev        = &corgiscoop_device.dev,
+	.irq        = CORGI_IRQ_GPIO_CF_IRQ,
+	.cd_irq     = CORGI_IRQ_GPIO_CF_CD,
+	.cd_irq_str = "PCMCIA0 CD",
+},
+};
+
 struct platform_device corgiscoop_device = {
 	.name		= "sharp-scoop",
 	.id		= -1,
@@ -241,6 +250,9 @@ static void __init corgi_init(void)
  	pxa_set_udc_info(&udc_info);
 	pxa_set_mci_info(&corgi_mci_platform_data);
 
+	scoop_num = 1;
+	scoop_devs = &corgi_pcmcia_scoop[0];
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 0e4f6fa..47cfb8b 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -62,6 +62,15 @@ struct platform_device poodle_scoop_device = {
 	.resource	= poodle_scoop_resources,
 };
 
+static struct scoop_pcmcia_dev poodle_pcmcia_scoop[] = {
+{
+	.dev        = &poodle_scoop_device.dev,
+	.irq        = POODLE_IRQ_GPIO_CF_IRQ,
+	.cd_irq     = POODLE_IRQ_GPIO_CF_CD,
+	.cd_irq_str = "PCMCIA0 CD",
+},
+};
+
 
 /* LoCoMo device */
 static struct resource locomo_resources[] = {
@@ -147,6 +156,9 @@ static void __init poodle_init(void)
 
 	set_pxa_fb_info(&poodle_fb_info);
 
+	scoop_num = 1;
+	scoop_devs = &poodle_pcmcia_scoop[0];
+
 	ret = platform_add_devices(devices, ARRAY_SIZE(devices));
 	if (ret) {
 		printk(KERN_WARNING "poodle: Unable to register LoCoMo device\n");
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 79044d9..66bf5bb 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -110,34 +110,24 @@ void __init n30_init_irq(void)
 	s3c24xx_init_irq();
 }
 
-
-static int n30_usbstart_thread(void *unused)
-{
-	/* Turn off suspend on both USB ports, and switch the
-	 * selectable USB port to USB device mode. */
-	writel(readl(S3C2410_MISCCR) & ~0x00003008, S3C2410_MISCCR);
-
-	/* Turn off the D+ pull up for 3 seconds so that the USB host
-	 * at the other end will do a rescan of the USB bus.  */
-	s3c2410_gpio_setpin(S3C2410_GPB3, 0);
-
-	msleep_interruptible(3*HZ);
-
-	s3c2410_gpio_setpin(S3C2410_GPB3, 1);
-
-	return 0;
-}
-
+/* GPB3 is the line that controls the pull-up for the USB D+ line */
 
 void __init n30_init(void)
 {
 	s3c_device_i2c.dev.platform_data = &n30_i2ccfg;
 
-	kthread_run(n30_usbstart_thread, NULL, "n30_usbstart");
+	/* Turn off suspend on both USB ports, and switch the
+	 * selectable USB port to USB device mode. */
+
+	s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
+			      S3C2410_MISCCR_USBSUSPND0 |
+			      S3C2410_MISCCR_USBSUSPND1, 0x0);
 }
 
 MACHINE_START(N30, "Acer-N30")
-	/* Maintainer: Christer Weinigel <christer@weinigel.se>, Ben Dooks <ben-linux@fluff.org> */
+	/* Maintainer: Christer Weinigel <christer@weinigel.se>,
+				Ben Dooks <ben-linux@fluff.org>
+	*/
 	.phys_ram	= S3C2410_SDRAM_PA,
 	.phys_io	= S3C2410_PA_UART,
 	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,