[AVR32] Add support for AT32AP7001 and AT32AP7002

These are derivatives of the AT32AP7000 chip, which means that most of
the code stays the same. Rename a few files, functions, definitions
and config symbols to reflect that they apply to all AP700x chips, and
exclude some platform devices from chips where they aren't present.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

8 files changed, 51 insertions, 21 deletions

diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
index 767a19c..e37e6b9 100644
--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig
@@ -84,13 +84,26 @@ config PLATFORM_AT32AP
 	select MMU
 	select PERFORMANCE_COUNTERS
 
+config CPU_AT32AP700X
+	bool
+	select PLATFORM_AT32AP
+
 choice
 	prompt "AVR32 CPU type"
 	default CPU_AT32AP7000
 
 config CPU_AT32AP7000
 	bool "AT32AP7000"
-	select PLATFORM_AT32AP
+	select CPU_AT32AP700X
+
+config CPU_AT32AP7001
+	bool "AT32AP7001"
+	select CPU_AT32AP700X
+
+config CPU_AT32AP7002
+	bool "AT32AP7002"
+	select CPU_AT32AP700X
+
 endchoice
 
 #
@@ -126,15 +139,15 @@ source "arch/avr32/mach-at32ap/Kconfig"
 
 config LOAD_ADDRESS
 	hex
-	default 0x10000000 if LOADER_U_BOOT=y && CPU_AT32AP7000=y
+	default 0x10000000 if LOADER_U_BOOT=y && CPU_AT32AP700X=y
 
 config ENTRY_ADDRESS
 	hex
-	default 0x90000000 if LOADER_U_BOOT=y && CPU_AT32AP7000=y
+	default 0x90000000 if LOADER_U_BOOT=y && CPU_AT32AP700X=y
 
 config PHYS_OFFSET
 	hex
-	default 0x10000000 if CPU_AT32AP7000=y
+	default 0x10000000 if CPU_AT32AP700X=y
 
 source "kernel/Kconfig.preempt"
 
diff --git a/arch/avr32/Makefile b/arch/avr32/Makefile
index f75d52c..17a3529 100644
--- a/arch/avr32/Makefile
+++ b/arch/avr32/Makefile
@@ -16,7 +16,7 @@ KBUILD_AFLAGS	+= -mrelax -mno-pic
 CFLAGS_MODULE	+= -mno-relax
 LDFLAGS_vmlinux	+= --relax
 
-cpuflags-$(CONFIG_CPU_AT32AP7000)	+= -mcpu=ap7000
+cpuflags-$(CONFIG_PLATFORM_AT32AP)	+= -march=ap
 
 KBUILD_CFLAGS	+= $(cpuflags-y)
 KBUILD_AFLAGS	+= $(cpuflags-y)
diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c
index 52987c8..a398be2 100644
--- a/arch/avr32/boards/atngw100/setup.c
+++ b/arch/avr32/boards/atngw100/setup.c
@@ -20,7 +20,7 @@
 #include <asm/io.h>
 #include <asm/setup.h>
 
-#include <asm/arch/at32ap7000.h>
+#include <asm/arch/at32ap700x.h>
 #include <asm/arch/board.h>
 #include <asm/arch/init.h>
 #include <asm/arch/portmux.h>
diff --git a/arch/avr32/configs/atngw100_defconfig b/arch/avr32/configs/atngw100_defconfig
index b799a68..374c17b 100644
--- a/arch/avr32/configs/atngw100_defconfig
+++ b/arch/avr32/configs/atngw100_defconfig
@@ -111,7 +111,10 @@ CONFIG_SUBARCH_AVR32B=y
 CONFIG_MMU=y
 CONFIG_PERFORMANCE_COUNTERS=y
 CONFIG_PLATFORM_AT32AP=y
+CONFIG_CPU_AT32AP700X=y
 CONFIG_CPU_AT32AP7000=y
+# CONFIG_CPU_AT32AP7001 is not set
+# CONFIG_CPU_AT32AP7002 is not set
 # CONFIG_BOARD_ATSTK1000 is not set
 CONFIG_BOARD_ATNGW100=y
 CONFIG_LOADER_U_BOOT=y
@@ -119,9 +122,9 @@ CONFIG_LOADER_U_BOOT=y
 #
 # Atmel AVR32 AP options
 #
-# CONFIG_AP7000_32_BIT_SMC is not set
-CONFIG_AP7000_16_BIT_SMC=y
-# CONFIG_AP7000_8_BIT_SMC is not set
+# CONFIG_AP700X_32_BIT_SMC is not set
+CONFIG_AP700X_16_BIT_SMC=y
+# CONFIG_AP700X_8_BIT_SMC is not set
 CONFIG_LOAD_ADDRESS=0x10000000
 CONFIG_ENTRY_ADDRESS=0x90000000
 CONFIG_PHYS_OFFSET=0x10000000
diff --git a/arch/avr32/configs/atstk1002_defconfig b/arch/avr32/configs/atstk1002_defconfig
index 3b977fd..7614c54 100644
--- a/arch/avr32/configs/atstk1002_defconfig
+++ b/arch/avr32/configs/atstk1002_defconfig
@@ -114,6 +114,8 @@ CONFIG_MMU=y
 CONFIG_PERFORMANCE_COUNTERS=y
 CONFIG_PLATFORM_AT32AP=y
 CONFIG_CPU_AT32AP7000=y
+# CONFIG_CPU_AT32AP7001 is not set
+# CONFIG_CPU_AT32AP7002 is not set
 CONFIG_BOARD_ATSTK1002=y
 CONFIG_BOARD_ATSTK1000=y
 # CONFIG_BOARD_ATNGW100 is not set
@@ -122,9 +124,9 @@ CONFIG_LOADER_U_BOOT=y
 #
 # Atmel AVR32 AP options
 #
-# CONFIG_AP7000_32_BIT_SMC is not set
-CONFIG_AP7000_16_BIT_SMC=y
-# CONFIG_AP7000_8_BIT_SMC is not set
+# CONFIG_AP700X_32_BIT_SMC is not set
+CONFIG_AP700X_16_BIT_SMC=y
+# CONFIG_AP700X_8_BIT_SMC is not set
 CONFIG_LOAD_ADDRESS=0x10000000
 CONFIG_ENTRY_ADDRESS=0x90000000
 CONFIG_PHYS_OFFSET=0x10000000
diff --git a/arch/avr32/mach-at32ap/Kconfig b/arch/avr32/mach-at32ap/Kconfig
index eb30783..a7bbcc8 100644
--- a/arch/avr32/mach-at32ap/Kconfig
+++ b/arch/avr32/mach-at32ap/Kconfig
@@ -3,9 +3,9 @@ if PLATFORM_AT32AP
 menu "Atmel AVR32 AP options"
 
 choice
-	prompt "AT32AP7000 static memory bus width"
-	depends on CPU_AT32AP7000
-	default AP7000_16_BIT_SMC
+	prompt "AT32AP700x static memory bus width"
+	depends on CPU_AT32AP700X
+	default AP700X_16_BIT_SMC
 	help
 	  Define the width of the AP7000 external static memory interface.
 	  This is used to determine how to mangle the address and/or data
@@ -15,13 +15,13 @@ choice
 	  width for all chip selects, excluding the flash (which is using
 	  raw access and is thus not affected by any of this.)
 
-config AP7000_32_BIT_SMC
+config AP700X_32_BIT_SMC
 	bool "32 bit"
 
-config AP7000_16_BIT_SMC
+config AP700X_16_BIT_SMC
 	bool "16 bit"
 
-config AP7000_8_BIT_SMC
+config AP700X_8_BIT_SMC
 	bool "8 bit"
 
 endchoice
diff --git a/arch/avr32/mach-at32ap/Makefile b/arch/avr32/mach-at32ap/Makefile
index a8b4450..5e9f821 100644
--- a/arch/avr32/mach-at32ap/Makefile
+++ b/arch/avr32/mach-at32ap/Makefile
@@ -1,4 +1,4 @@
 obj-y				+= at32ap.o clock.o intc.o extint.o pio.o hsmc.o
-obj-$(CONFIG_CPU_AT32AP7000)	+= at32ap7000.o
-obj-$(CONFIG_CPU_AT32AP7000)	+= time-tc.o
+obj-$(CONFIG_CPU_AT32AP700X)	+= at32ap700x.o
+obj-$(CONFIG_CPU_AT32AP700X)	+= time-tc.o
 obj-$(CONFIG_CPU_FREQ_AT32AP)	+= cpufreq.o
diff --git a/arch/avr32/mach-at32ap/at32ap7000.c b/arch/avr32/mach-at32ap/at32ap700x.c
index 7c4388f..9386e1f 100644
--- a/arch/avr32/mach-at32ap/at32ap7000.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -14,7 +14,7 @@
 
 #include <asm/io.h>
 
-#include <asm/arch/at32ap7000.h>
+#include <asm/arch/at32ap700x.h>
 #include <asm/arch/board.h>
 #include <asm/arch/portmux.h>
 
@@ -803,6 +803,7 @@ void __init at32_setup_serial_console(unsigned int usart_id)
  *  Ethernet
  * -------------------------------------------------------------------- */
 
+#ifdef CONFIG_CPU_AT32AP7000
 static struct eth_platform_data macb0_data;
 static struct resource macb0_resource[] = {
 	PBMEM(0xfff01800),
@@ -890,6 +891,7 @@ at32_add_device_eth(unsigned int id, struct eth_platform_data *data)
 
 	return pdev;
 }
+#endif
 
 /* --------------------------------------------------------------------
  *  SPI
@@ -1064,6 +1066,7 @@ err_add_resources:
 /* --------------------------------------------------------------------
  *  LCDC
  * -------------------------------------------------------------------- */
+#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7002)
 static struct atmel_lcdfb_info atmel_lcdfb0_data;
 static struct resource atmel_lcdfb0_resource[] = {
 	{
@@ -1179,6 +1182,7 @@ err_dup_modedb:
 	kfree(monspecs);
 	return NULL;
 }
+#endif
 
 /* --------------------------------------------------------------------
  *  SSC
@@ -1332,6 +1336,7 @@ out_free_pdev:
 /* --------------------------------------------------------------------
  * IDE / CompactFlash
  * -------------------------------------------------------------------- */
+#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7001)
 static struct resource at32_smc_cs4_resource[] __initdata = {
 	{
 		.start	= 0x04000000,
@@ -1464,6 +1469,7 @@ fail:
 	platform_device_put(pdev);
 	return NULL;
 }
+#endif
 
 /* --------------------------------------------------------------------
  * AC97C
@@ -1639,16 +1645,20 @@ struct clk *at32_clock_list[] = {
 	&atmel_usart1_usart,
 	&atmel_usart2_usart,
 	&atmel_usart3_usart,
+#if defined(CONFIG_CPU_AT32AP7000)
 	&macb0_hclk,
 	&macb0_pclk,
 	&macb1_hclk,
 	&macb1_pclk,
+#endif
 	&atmel_spi0_spi_clk,
 	&atmel_spi1_spi_clk,
 	&atmel_twi0_pclk,
 	&atmel_mci0_pclk,
+#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7002)
 	&atmel_lcdfb0_hck1,
 	&atmel_lcdfb0_pixclk,
+#endif
 	&ssc0_pclk,
 	&ssc1_pclk,
 	&ssc2_pclk,
@@ -1697,7 +1707,9 @@ void __init at32_clock_init(void)
 	genclk_init_parent(&gclk2);
 	genclk_init_parent(&gclk3);
 	genclk_init_parent(&gclk4);
+#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7002)
 	genclk_init_parent(&atmel_lcdfb0_pixclk);
+#endif
 	genclk_init_parent(&abdac0_sample_clk);
 
 	/*