diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2009-03-26 11:20:23 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2009-03-26 11:20:23 -0700 |
commit | 0384e2959127a56d0640505d004d8dd92f9c29f5 (patch) | |
tree | fa2a8d6829ed61fa561deab03a259e25b7b49865 /drivers/ata/sata_mv.c | |
parent | 61a091827e273650b39eb87c799a6d260913fa0b (diff) | |
parent | c96f1732e25362d10ee7bcac1df8412a2e6b7d23 (diff) | |
download | kernel_samsung_smdk4412-0384e2959127a56d0640505d004d8dd92f9c29f5.zip kernel_samsung_smdk4412-0384e2959127a56d0640505d004d8dd92f9c29f5.tar.gz kernel_samsung_smdk4412-0384e2959127a56d0640505d004d8dd92f9c29f5.tar.bz2 |
Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (35 commits)
[libata] Improve timeout handling
[libata] Drain data on errors
pata_sc1200: Activate secondary channel
pata_artop: Serializing support
[libata] ahci: correct enclosure LED state save
[libata] More robust parsing for IDENTIFY DEVICE multi_count field
sata_mv: fix LED blinking for SoC+NCQ
sata_mv: optimize IRQ coalescing for 8-port chips
sata_mv: implement IRQ coalescing (v2)
sata_mv: cosmetic preparations for IRQ coalescing
pata-rb532-cf: platform_get_irq() fix ignored failure
pata_efar: fix *dma_mask
pata_radisys: fix mwdma_mask to exclude mwdma0
[libata] convert drivers to use ata.h mode mask defines
include/linux/ata.h: add some more transfer masks
ahci: Blacklist HP Compaq 6720s that spins off disks during ACPI power off
[libata] sata_mv: Implement direct FIS transmission via mv_qc_issue_fis().
[libata] Export ata_pio_queue_task() so that it can be used from sata_mv.
[libata] sata_mv: Add a new mv_sff_check_status() function to sata_mv.
[libata] sata_mv: Tighten up interrupt masking in mv_qc_issue()
...
Diffstat (limited to 'drivers/ata/sata_mv.c')
-rw-r--r-- | drivers/ata/sata_mv.c | 868 |
1 files changed, 739 insertions, 129 deletions
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 74b1080..a377226 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -1,10 +1,13 @@ /* * sata_mv.c - Marvell SATA support * - * Copyright 2008: Marvell Corporation, all rights reserved. + * Copyright 2008-2009: Marvell Corporation, all rights reserved. * Copyright 2005: EMC Corporation, all rights reserved. * Copyright 2005 Red Hat, Inc. All rights reserved. * + * Originally written by Brett Russ. + * Extensive overhaul and enhancement by Mark Lord <mlord@pobox.com>. + * * Please ALWAYS copy linux-ide@vger.kernel.org on emails. * * This program is free software; you can redistribute it and/or modify @@ -25,20 +28,13 @@ /* * sata_mv TODO list: * - * --> Errata workaround for NCQ device errors. - * * --> More errata workarounds for PCI-X. * * --> Complete a full errata audit for all chipsets to identify others. * - * --> ATAPI support (Marvell claims the 60xx/70xx chips can do it). - * * --> Develop a low-power-consumption strategy, and implement it. * - * --> [Experiment, low priority] Investigate interrupt coalescing. - * Quite often, especially with PCI Message Signalled Interrupts (MSI), - * the overhead reduced by interrupt mitigation is quite often not - * worth the latency cost. + * --> Add sysfs attributes for per-chip / per-HC IRQ coalescing thresholds. * * --> [Experiment, Marvell value added] Is it possible to use target * mode to cross-connect two Linux boxes with Marvell cards? If so, @@ -68,7 +64,27 @@ #include <linux/libata.h> #define DRV_NAME "sata_mv" -#define DRV_VERSION "1.25" +#define DRV_VERSION "1.27" + +/* + * module options + */ + +static int msi; +#ifdef CONFIG_PCI +module_param(msi, int, S_IRUGO); +MODULE_PARM_DESC(msi, "Enable use of PCI MSI (0=off, 1=on)"); +#endif + +static int irq_coalescing_io_count; +module_param(irq_coalescing_io_count, int, S_IRUGO); +MODULE_PARM_DESC(irq_coalescing_io_count, + "IRQ coalescing I/O count threshold (0..255)"); + +static int irq_coalescing_usecs; +module_param(irq_coalescing_usecs, int, S_IRUGO); +MODULE_PARM_DESC(irq_coalescing_usecs, + "IRQ coalescing time threshold in usecs"); enum { /* BAR's are enumerated in terms of pci_resource_start() terms */ @@ -79,13 +95,32 @@ enum { MV_MAJOR_REG_AREA_SZ = 0x10000, /* 64KB */ MV_MINOR_REG_AREA_SZ = 0x2000, /* 8KB */ + /* For use with both IRQ coalescing methods ("all ports" or "per-HC" */ + COAL_CLOCKS_PER_USEC = 150, /* for calculating COAL_TIMEs */ + MAX_COAL_TIME_THRESHOLD = ((1 << 24) - 1), /* internal clocks count */ + MAX_COAL_IO_COUNT = 255, /* completed I/O count */ + MV_PCI_REG_BASE = 0, - MV_IRQ_COAL_REG_BASE = 0x18000, /* 6xxx part only */ - MV_IRQ_COAL_CAUSE = (MV_IRQ_COAL_REG_BASE + 0x08), - MV_IRQ_COAL_CAUSE_LO = (MV_IRQ_COAL_REG_BASE + 0x88), - MV_IRQ_COAL_CAUSE_HI = (MV_IRQ_COAL_REG_BASE + 0x8c), - MV_IRQ_COAL_THRESHOLD = (MV_IRQ_COAL_REG_BASE + 0xcc), - MV_IRQ_COAL_TIME_THRESHOLD = (MV_IRQ_COAL_REG_BASE + 0xd0), + + /* + * Per-chip ("all ports") interrupt coalescing feature. + * This is only for GEN_II / GEN_IIE hardware. + * + * Coalescing defers the interrupt until either the IO_THRESHOLD + * (count of completed I/Os) is met, or the TIME_THRESHOLD is met. + */ + MV_COAL_REG_BASE = 0x18000, + MV_IRQ_COAL_CAUSE = (MV_COAL_REG_BASE + 0x08), + ALL_PORTS_COAL_IRQ = (1 << 4), /* all ports irq event */ + + MV_IRQ_COAL_IO_THRESHOLD = (MV_COAL_REG_BASE + 0xcc), + MV_IRQ_COAL_TIME_THRESHOLD = (MV_COAL_REG_BASE + 0xd0), + + /* + * Registers for the (unused here) transaction coalescing feature: + */ + MV_TRAN_COAL_CAUSE_LO = (MV_COAL_REG_BASE + 0x88), + MV_TRAN_COAL_CAUSE_HI = (MV_COAL_REG_BASE + 0x8c), MV_SATAHC0_REG_BASE = 0x20000, MV_FLASH_CTL_OFS = 0x1046c, @@ -117,17 +152,16 @@ enum { /* Host Flags */ MV_FLAG_DUAL_HC = (1 << 30), /* two SATA Host Controllers */ - MV_FLAG_IRQ_COALESCE = (1 << 29), /* IRQ coalescing capability */ MV_COMMON_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_MMIO | ATA_FLAG_NO_ATAPI | - ATA_FLAG_PIO_POLLING, + ATA_FLAG_MMIO | ATA_FLAG_PIO_POLLING, + + MV_GEN_I_FLAGS = MV_COMMON_FLAGS | ATA_FLAG_NO_ATAPI, - MV_6XXX_FLAGS = MV_FLAG_IRQ_COALESCE, + MV_GEN_II_FLAGS = MV_COMMON_FLAGS | ATA_FLAG_NCQ | + ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA, - MV_GENIIE_FLAGS = MV_COMMON_FLAGS | MV_6XXX_FLAGS | - ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA | - ATA_FLAG_NCQ | ATA_FLAG_AN, + MV_GEN_IIE_FLAGS = MV_GEN_II_FLAGS | ATA_FLAG_AN, CRQB_FLAG_READ = (1 << 0), CRQB_TAG_SHIFT = 1, @@ -180,16 +214,18 @@ enum { PCI_HC_MAIN_IRQ_MASK_OFS = 0x1d64, SOC_HC_MAIN_IRQ_CAUSE_OFS = 0x20020, SOC_HC_MAIN_IRQ_MASK_OFS = 0x20024, - ERR_IRQ = (1 << 0), /* shift by port # */ - DONE_IRQ = (1 << 1), /* shift by port # */ + ERR_IRQ = (1 << 0), /* shift by (2 * port #) */ + DONE_IRQ = (1 << 1), /* shift by (2 * port #) */ HC0_IRQ_PEND = 0x1ff, /* bits 0-8 = HC0's ports */ HC_SHIFT = 9, /* bits 9-17 = HC1's ports */ + DONE_IRQ_0_3 = 0x000000aa, /* DONE_IRQ ports 0,1,2,3 */ + DONE_IRQ_4_7 = (DONE_IRQ_0_3 << HC_SHIFT), /* 4,5,6,7 */ PCI_ERR = (1 << 18), - TRAN_LO_DONE = (1 << 19), /* 6xxx: IRQ coalescing */ - TRAN_HI_DONE = (1 << 20), /* 6xxx: IRQ coalescing */ - PORTS_0_3_COAL_DONE = (1 << 8), - PORTS_4_7_COAL_DONE = (1 << 17), - PORTS_0_7_COAL_DONE = (1 << 21), /* 6xxx: IRQ coalescing */ + TRAN_COAL_LO_DONE = (1 << 19), /* transaction coalescing */ + TRAN_COAL_HI_DONE = (1 << 20), /* transaction coalescing */ + PORTS_0_3_COAL_DONE = (1 << 8), /* HC0 IRQ coalescing */ + PORTS_4_7_COAL_DONE = (1 << 17), /* HC1 IRQ coalescing */ + ALL_PORTS_COAL_DONE = (1 << 21), /* GEN_II(E) IRQ coalescing */ GPIO_INT = (1 << 22), SELF_INT = (1 << 23), TWSI_INT = (1 << 24), @@ -205,6 +241,21 @@ enum { HC_COAL_IRQ = (1 << 4), /* IRQ coalescing */ DEV_IRQ = (1 << 8), /* shift by port # */ + /* + * Per-HC (Host-Controller) interrupt coalescing feature. + * This is present on all chip generations. + * + * Coalescing defers the interrupt until either the IO_THRESHOLD + * (count of completed I/Os) is met, or the TIME_THRESHOLD is met. + */ + HC_IRQ_COAL_IO_THRESHOLD_OFS = 0x000c, + HC_IRQ_COAL_TIME_THRESHOLD_OFS = 0x0010, + + SOC_LED_CTRL_OFS = 0x2c, + SOC_LED_CTRL_BLINK = (1 << 0), /* Active LED blink */ + SOC_LED_CTRL_ACT_PRESENCE = (1 << 2), /* Multiplex dev presence */ + /* with dev activity LED */ + /* Shadow block registers */ SHD_BLK_OFS = 0x100, SHD_CTL_AST_OFS = 0x20, /* ofs from SHD_BLK_OFS */ @@ -346,6 +397,12 @@ enum { EDMA_ARB_CFG_OFS = 0x38, EDMA_HALTCOND_OFS = 0x60, /* GenIIe halt conditions */ + EDMA_UNKNOWN_RSVD_OFS = 0x6C, /* GenIIe unknown/reserved */ + + BMDMA_CMD_OFS = 0x224, /* bmdma command register */ + BMDMA_STATUS_OFS = 0x228, /* bmdma status register */ + BMDMA_PRD_LOW_OFS = 0x22c, /* bmdma PRD addr 31:0 */ + BMDMA_PRD_HIGH_OFS = 0x230, /* bmdma PRD addr 63:32 */ /* Host private flags (hp_flags) */ MV_HP_FLAG_MSI = (1 << 0), @@ -359,12 +416,14 @@ enum { MV_HP_PCIE = (1 << 9), /* PCIe bus/regs: 7042 */ MV_HP_CUT_THROUGH = (1 << 10), /* can use EDMA cut-through */ MV_HP_FLAG_SOC = (1 << 11), /* SystemOnChip, no PCI */ + MV_HP_QUIRK_LED_BLINK_EN = (1 << 12), /* is led blinking enabled? */ /* Port private flags (pp_flags) */ MV_PP_FLAG_EDMA_EN = (1 << 0), /* is EDMA engine enabled? */ MV_PP_FLAG_NCQ_EN = (1 << 1), /* is EDMA set up for NCQ? */ MV_PP_FLAG_FBS_EN = (1 << 2), /* is EDMA set up for FBS? */ MV_PP_FLAG_DELAYED_EH = (1 << 3), /* delayed dev err handling */ + MV_PP_FLAG_FAKE_ATA_BUSY = (1 << 4), /* ignore initial ATA_DRDY */ }; #define IS_GEN_I(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_I) @@ -433,6 +492,18 @@ struct mv_sg { __le32 reserved; }; +/* + * We keep a local cache of a few frequently accessed port + * registers here, to avoid having to read them (very slow) + * when switching between EDMA and non-EDMA modes. + */ +struct mv_cached_regs { + u32 fiscfg; + u32 ltmode; + u32 haltcond; + u32 unknown_rsvd; +}; + struct mv_port_priv { struct mv_crqb *crqb; dma_addr_t crqb_dma; @@ -445,6 +516,7 @@ struct mv_port_priv { unsigned int resp_idx; u32 pp_flags; + struct mv_cached_regs cached; unsigned int delayed_eh_pmp_map; }; @@ -535,7 +607,7 @@ static void mv_reset_channel(struct mv_host_priv *hpriv, void __iomem *mmio, unsigned int port_no); static int mv_stop_edma(struct ata_port *ap); static int mv_stop_edma_engine(void __iomem *port_mmio); -static void mv_edma_cfg(struct ata_port *ap, int want_ncq); +static void mv_edma_cfg(struct ata_port *ap, int want_ncq, int want_edma); static void mv_pmp_select(struct ata_port *ap, int pmp); static int mv_pmp_hardreset(struct ata_link *link, unsigned int *class, @@ -546,6 +618,14 @@ static void mv_pmp_error_handler(struct ata_port *ap); static void mv_process_crpb_entries(struct ata_port *ap, struct mv_port_priv *pp); +static void mv_sff_irq_clear(struct ata_port *ap); +static int mv_check_atapi_dma(struct ata_queued_cmd *qc); +static void mv_bmdma_setup(struct ata_queued_cmd *qc); +static void mv_bmdma_start(struct ata_queued_cmd *qc); +static void mv_bmdma_stop(struct ata_queued_cmd *qc); +static u8 mv_bmdma_status(struct ata_port *ap); +static u8 mv_sff_check_status(struct ata_port *ap); + /* .sg_tablesize is (MV_MAX_SG_CT / 2) in the structures below * because we have to allow room for worst case splitting of * PRDs for 64K boundaries in mv_fill_sg(). @@ -566,6 +646,8 @@ static struct scsi_host_template mv6_sht = { static struct ata_port_operations mv5_ops = { .inherits = &ata_sff_port_ops, + .lost_interrupt = ATA_OP_NULL, + .qc_defer = mv_qc_defer, .qc_prep = mv_qc_prep, .qc_issue = mv_qc_issue, @@ -593,6 +675,14 @@ static struct ata_port_operations mv6_ops = { .pmp_softreset = mv_softreset, .softreset = mv_softreset, .error_handler = mv_pmp_error_handler, + + .sff_check_status = mv_sff_check_status, + .sff_irq_clear = mv_sff_irq_clear, + .check_atapi_dma = mv_check_atapi_dma, + .bmdma_setup = mv_bmdma_setup, + .bmdma_start = mv_bmdma_start, + .bmdma_stop = mv_bmdma_stop, + .bmdma_status = mv_bmdma_status, }; static struct ata_port_operations mv_iie_ops = { @@ -603,53 +693,49 @@ static struct ata_port_operations mv_iie_ops = { static const struct ata_port_info mv_port_info[] = { { /* chip_504x */ - .flags = MV_COMMON_FLAGS, + .flags = MV_GEN_I_FLAGS, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, .port_ops = &mv5_ops, }, { /* chip_508x */ - .flags = MV_COMMON_FLAGS | MV_FLAG_DUAL_HC, + .flags = MV_GEN_I_FLAGS | MV_FLAG_DUAL_HC, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, .port_ops = &mv5_ops, }, { /* chip_5080 */ - .flags = MV_COMMON_FLAGS | MV_FLAG_DUAL_HC, + .flags = MV_GEN_I_FLAGS | MV_FLAG_DUAL_HC, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, .port_ops = &mv5_ops, }, { /* chip_604x */ - .flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS | - ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA | - ATA_FLAG_NCQ, + .flags = MV_GEN_II_FLAGS, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, .port_ops = &mv6_ops, }, { /* chip_608x */ - .flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS | - ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA | - ATA_FLAG_NCQ | MV_FLAG_DUAL_HC, + .flags = MV_GEN_II_FLAGS | MV_FLAG_DUAL_HC, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, .port_ops = &mv6_ops, }, { /* chip_6042 */ - .flags = MV_GENIIE_FLAGS, + .flags = MV_GEN_IIE_FLAGS, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, .port_ops = &mv_iie_ops, }, { /* chip_7042 */ - .flags = MV_GENIIE_FLAGS, + .flags = MV_GEN_IIE_FLAGS, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, .port_ops = &mv_iie_ops, }, { /* chip_soc */ - .flags = MV_GENIIE_FLAGS, + .flags = MV_GEN_IIE_FLAGS, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, .port_ops = &mv_iie_ops, @@ -794,6 +880,44 @@ static inline int mv_get_hc_count(unsigned long port_flags) return ((port_flags & MV_FLAG_DUAL_HC) ? 2 : 1); } +/** + * mv_save_cached_regs - (re-)initialize cached port registers + * @ap: the port whose registers we are caching + * + * Initialize the local cache of port registers, + * so that reading them over and over again can + * be avoided on the hotter paths of this driver. + * This saves a few microseconds each time we switch + * to/from EDMA mode to perform (eg.) a drive cache flush. + */ +static void mv_save_cached_regs(struct ata_port *ap) +{ + void __iomem *port_mmio = mv_ap_base(ap); + struct mv_port_priv *pp = ap->private_data; + + pp->cached.fiscfg = readl(port_mmio + FISCFG_OFS); + pp->cached.ltmode = readl(port_mmio + LTMODE_OFS); + pp->cached.haltcond = readl(port_mmio + EDMA_HALTCOND_OFS); + pp->cached.unknown_rsvd = readl(port_mmio + EDMA_UNKNOWN_RSVD_OFS); +} + +/** + * mv_write_cached_reg - write to a cached port register + * @addr: hardware address of the register + * @old: pointer to cached value of the register + * @new: new value for the register + * + * Write a new value to a cached register, + * but only if the value is different from before. + */ +static inline void mv_write_cached_reg(void __iomem *addr, u32 *old, u32 new) +{ + if (new != *old) { + *old = new; + writel(new, addr); + } +} + static void mv_set_edma_ptrs(void __iomem *port_mmio, struct mv_host_priv *hpriv, struct mv_port_priv *pp) @@ -825,6 +949,23 @@ static void mv_set_edma_ptrs(void __iomem *port_mmio, port_mmio + EDMA_RSP_Q_OUT_PTR_OFS); } +static void mv_write_main_irq_mask(u32 mask, struct mv_host_priv *hpriv) +{ + /* + * When writing to the main_irq_mask in hardware, + * we must ensure exclusivity between the interrupt coalescing bits + * and the corresponding individual port DONE_IRQ bits. + * + * Note that this register is really an "IRQ enable" register, + * not an "IRQ mask" register as Marvell's naming might suggest. + */ + if (mask & (ALL_PORTS_COAL_DONE | PORTS_0_3_COAL_DONE)) + mask &= ~DONE_IRQ_0_3; + if (mask & (ALL_PORTS_COAL_DONE | PORTS_4_7_COAL_DONE)) + mask &= ~DONE_IRQ_4_7; + writelfl(mask, hpriv->main_irq_mask_addr); +} + static void mv_set_main_irq_mask(struct ata_host *host, u32 disable_bits, u32 enable_bits) { @@ -835,7 +976,7 @@ static void mv_set_main_irq_mask(struct ata_host *host, new_mask = (old_mask & ~disable_bits) | enable_bits; if (new_mask != old_mask) { hpriv->main_irq_mask = new_mask; - writelfl(new_mask, hpriv->main_irq_mask_addr); + mv_write_main_irq_mask(new_mask, hpriv); } } @@ -852,8 +993,94 @@ static void mv_enable_port_irqs(struct ata_port *ap, mv_set_main_irq_mask(ap->host, disable_bits, enable_bits); } +static void mv_clear_and_enable_port_irqs(struct ata_port *ap, + void __iomem *port_mmio, + unsigned int port_irqs) +{ + struct mv_host_priv *hpriv = ap->host->private_data; + int hardport = mv_hardport_from_port(ap->port_no); + void __iomem *hc_mmio = mv_hc_base_from_port( + mv_host_base(ap->host), ap->port_no); + u32 hc_irq_cause; + + /* clear EDMA event indicators, if any */ + writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); + + /* clear pending irq events */ + hc_irq_cause = ~((DEV_IRQ | DMA_IRQ) << hardport); + writelfl(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS); + + /* clear FIS IRQ Cause */ + if (IS_GEN_IIE(hpriv)) + writelfl(0, port_mmio + SATA_FIS_IRQ_CAUSE_OFS); + + mv_enable_port_irqs(ap, port_irqs); +} + +static void mv_set_irq_coalescing(struct ata_host *host, + unsigned int count, unsigned int usecs) +{ + struct mv_host_priv *hpriv = host->private_data; + void __iomem *mmio = hpriv->base, *hc_mmio; + u32 coal_enable = 0; + unsigned long flags; + unsigned int clks, is_dual_hc = hpriv->n_ports > MV_PORTS_PER_HC; + const u32 coal_disable = PORTS_0_3_COAL_DONE | PORTS_4_7_COAL_DONE | + ALL_PORTS_COAL_DONE; + + /* Disable IRQ coalescing if either threshold is zero */ + if (!usecs || !count) { + clks = count = 0; + } else { + /* Respect maximum limits of the hardware */ + clks = usecs * COAL_CLOCKS_PER_USEC; + if (clks > MAX_COAL_TIME_THRESHOLD) + clks = MAX_COAL_TIME_THRESHOLD; + if (count > MAX_COAL_IO_COUNT) + count = MAX_COAL_IO_COUNT; + } + + spin_lock_irqsave(&host->lock, flags); + mv_set_main_irq_mask(host, coal_disable, 0); + + if (is_dual_hc && !IS_GEN_I(hpriv)) { + /* + * GEN_II/GEN_IIE with dual host controllers: + * one set of global thresholds for the entire chip. + */ + writel(clks, mmio + MV_IRQ_COAL_TIME_THRESHOLD); + writel(count, mmio + MV_IRQ_COAL_IO_THRESHOLD); + /* clear leftover coal IRQ bit */ + writel(~ALL_PORTS_COAL_IRQ, mmio + MV_IRQ_COAL_CAUSE); + if (count) + coal_enable = ALL_PORTS_COAL_DONE; + clks = count = 0; /* force clearing of regular regs below */ + } + + /* + * All chips: independent thresholds for each HC on the chip. + */ + hc_mmio = mv_hc_base_from_port(mmio, 0); + writel(clks, hc_mmio + HC_IRQ_COAL_TIME_THRESHOLD_OFS); + writel(count, hc_mmio + HC_IRQ_COAL_IO_THRESHOLD_OFS); + writel(~HC_COAL_IRQ, hc_mmio + HC_IRQ_CAUSE_OFS); + if (count) + coal_enable |= PORTS_0_3_COAL_DONE; + if (is_dual_hc) { + hc_mmio = mv_hc_base_from_port(mmio, MV_PORTS_PER_HC); + writel(clks, hc_mmio + HC_IRQ_COAL_TIME_THRESHOLD_OFS); + writel(count, hc_mmio + HC_IRQ_COAL_IO_THRESHOLD_OFS); + writel(~HC_COAL_IRQ, hc_mmio + HC_IRQ_CAUSE_OFS); + if (count) + coal_enable |= PORTS_4_7_COAL_DONE; + } + + mv_set_main_irq_mask(host, 0, coal_enable); + spin_unlock_irqrestore(&host->lock, flags); +} + /** - * mv_start_dma - Enable eDMA engine + * mv_start_edma - Enable eDMA engine * @base: port base address * @pp: port private data * @@ -863,7 +1090,7 @@ static void mv_enable_port_irqs(struct ata_port *ap, * LOCKING: * Inherited from caller. */ -static void mv_start_dma(struct ata_port *ap, void __iomem *port_mmio, +static void mv_start_edma(struct ata_port *ap, void __iomem *port_mmio, struct mv_port_priv *pp, u8 protocol) { int want_ncq = (protocol == ATA_PROT_NCQ); @@ -875,26 +1102,11 @@ static void mv_start_dma(struct ata_port *ap, void __iomem *port_mmio, } if (!(pp->pp_flags & MV_PP_FLAG_EDMA_EN)) { struct mv_host_priv *hpriv = ap->host->private_data; - int hardport = mv_hardport_from_port(ap->port_no); - void __iomem *hc_mmio = mv_hc_base_from_port( - mv_host_base(ap->host), ap->port_no); - u32 hc_irq_cause; - - /* clear EDMA event indicators, if any */ - writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); - /* clear pending irq events */ - hc_irq_cause = ~((DEV_IRQ | DMA_IRQ) << hardport); - writelfl(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS); - - mv_edma_cfg(ap, want_ncq); - - /* clear FIS IRQ Cause */ - if (IS_GEN_IIE(hpriv)) - writelfl(0, port_mmio + SATA_FIS_IRQ_CAUSE_OFS); + mv_edma_cfg(ap, want_ncq, 1); mv_set_edma_ptrs(port_mmio, hpriv, pp); - mv_enable_port_irqs(ap, DONE_IRQ|ERR_IRQ); + mv_clear_and_enable_port_irqs(ap, port_mmio, DONE_IRQ|ERR_IRQ); writelfl(EDMA_EN, port_mmio + EDMA_CMD_OFS); pp->pp_flags |= MV_PP_FLAG_EDMA_EN; @@ -952,6 +1164,7 @@ static int mv_stop_edma(struct ata_port *ap) { void __iomem *port_mmio = mv_ap_base(ap); struct mv_port_priv *pp = ap->private_data; + int err = 0; if (!(pp->pp_flags & MV_PP_FLAG_EDMA_EN)) return 0; @@ -959,9 +1172,10 @@ static int mv_stop_edma(struct ata_port *ap) mv_wait_for_edma_empty_idle(ap); if (mv_stop_edma_engine(port_mmio)) { ata_port_printk(ap, KERN_ERR, "Unable to stop eDMA\n"); - return -EIO; + err = -EIO; } - return 0; + mv_edma_cfg(ap, 0, 0); + return err; } #ifdef ATA_DEBUG @@ -1130,35 +1344,33 @@ static int mv_qc_defer(struct ata_queued_cmd *qc) return ATA_DEFER_PORT; } -static void mv_config_fbs(void __iomem *port_mmio, int want_ncq, int want_fbs) +static void mv_config_fbs(struct ata_port *ap, int want_ncq, int want_fbs) { - u32 new_fiscfg, old_fiscfg; - u32 new_ltmode, old_ltmode; - u32 new_haltcond, old_haltcond; + struct mv_port_priv *pp = ap->private_data; + void __iomem *port_mmio; - old_fiscfg = readl(port_mmio + FISCFG_OFS); - old_ltmode = readl(port_mmio + LTMODE_OFS); - old_haltcond = readl(port_mmio + EDMA_HALTCOND_OFS); + u32 fiscfg, *old_fiscfg = &pp->cached.fiscfg; + u32 ltmode, *old_ltmode = &pp->cached.ltmode; + u32 haltcond, *old_haltcond = &pp->cached.haltcond; - new_fiscfg = old_fiscfg & ~(FISCFG_SINGLE_SYNC | FISCFG_WAIT_DEV_ERR); - new_ltmode = old_ltmode & ~LTMODE_BIT8; - new_haltcond = old_haltcond | EDMA_ERR_DEV; + ltmode = *old_ltmode & ~LTMODE_BIT8; + haltcond = *old_haltcond | EDMA_ERR_DEV; if (want_fbs) { - new_fiscfg = old_fiscfg | FISCFG_SINGLE_SYNC; - new_ltmode = old_ltmode | LTMODE_BIT8; + fiscfg = *old_fiscfg | FISCFG_SINGLE_SYNC; + ltmode = *old_ltmode | LTMODE_BIT8; if (want_ncq) - new_haltcond &= ~EDMA_ERR_DEV; + haltcond &= ~EDMA_ERR_DEV; else - new_fiscfg |= FISCFG_WAIT_DEV_ERR; + fiscfg |= FISCFG_WAIT_DEV_ERR; + } else { + fiscfg = *old_fiscfg & ~(FISCFG_SINGLE_SYNC | FISCFG_WAIT_DEV_ERR); } - if (new_fiscfg != old_fiscfg) - writelfl(new_fiscfg, port_mmio + FISCFG_OFS); - if (new_ltmode != old_ltmode) - writelfl(new_ltmode, port_mmio + LTMODE_OFS); - if (new_haltcond != old_haltcond) - writelfl(new_haltcond, port_mmio + EDMA_HALTCOND_OFS); + port_mmio = mv_ap_base(ap); + mv_write_cached_reg(port_mmio + FISCFG_OFS, old_fiscfg, fiscfg); + mv_write_cached_reg(port_mmio + LTMODE_OFS, old_ltmode, ltmode); + mv_write_cached_reg(port_mmio + EDMA_HALTCOND_OFS, old_haltcond, haltcond); } static void mv_60x1_errata_sata25(struct ata_port *ap, int want_ncq) @@ -1176,7 +1388,86 @@ static void mv_60x1_errata_sata25(struct ata_port *ap, int want_ncq) writel(new, hpriv->base + MV_GPIO_PORT_CTL_OFS); } -static void mv_edma_cfg(struct ata_port *ap, int want_ncq) +/** + * mv_bmdma_enable - set a magic bit on GEN_IIE to allow bmdma + * @ap: Port being initialized + * + * There are two DMA modes on these chips: basic DMA, and EDMA. + * + * Bit-0 of the "EDMA RESERVED" register enables/disables use + * of basic DMA on the GEN_IIE versions of the chips. + * + * This bit survives EDMA resets, and must be set for basic DMA + * to function, and should be cleared when EDMA is active. + */ +static void mv_bmdma_enable_iie(struct ata_port *ap, int enable_bmdma) +{ + struct mv_port_priv *pp = ap->private_data; + u32 new, *old = &pp->cached.unknown_rsvd; + + if (enable_bmdma) + new = *old | 1; + else + new = *old & ~1; + mv_write_cached_reg(mv_ap_base(ap) + EDMA_UNKNOWN_RSVD_OFS, old, new); +} + +/* + * SOC chips have an issue whereby the HDD LEDs don't always blink + * during I/O when NCQ is enabled. Enabling a special "LED blink" mode + * of the SOC takes care of it, generating a steady blink rate when + * any drive on the chip is active. + * + * Unfortunately, the blink mode is a global hardware setting for the SOC, + * so we must use it whenever at least one port on the SOC has NCQ enabled. + * + * We turn "LED blink" off when NCQ is not in use anywhere, because the normal + * LED operation works then, and provides better (more accurate) feedback. + * + * Note that this code assumes that an SOC never has more than one HC onboard. + */ +static void mv_soc_led_blink_enable(struct ata_port *ap) +{ + struct ata_host *host = ap->host; + struct mv_host_priv *hpriv = host->private_data; + void __iomem *hc_mmio; + u32 led_ctrl; + + if (hpriv->hp_flags & MV_HP_QUIRK_LED_BLINK_EN) + return; + hpriv->hp_flags |= MV_HP_QUIRK_LED_BLINK_EN; + hc_mmio = mv_hc_base_from_port(mv_host_base(host), ap->port_no); + led_ctrl = readl(hc_mmio + SOC_LED_CTRL_OFS); + writel(led_ctrl | SOC_LED_CTRL_BLINK, hc_mmio + SOC_LED_CTRL_OFS); +} + +static void mv_soc_led_blink_disable(struct ata_port *ap) +{ + struct ata_host *host = ap->host; + struct mv_host_priv *hpriv = host->private_data; + void __iomem *hc_mmio; + u32 led_ctrl; + unsigned int port; + + if (!(hpriv->hp_flags & MV_HP_QUIRK_LED_BLINK_EN)) + return; + + /* disable led-blink only if no ports are using NCQ */ + for (port = 0; port < hpriv->n_ports; port++) { + struct ata_port *this_ap = host->ports[port]; + struct mv_port_priv *pp = this_ap->private_data; + + if (pp->pp_flags & MV_PP_FLAG_NCQ_EN) + return; + } + + hpriv->hp_flags &= ~MV_HP_QUIRK_LED_BLINK_EN; + hc_mmio = mv_hc_base_from_port(mv_host_base(host), ap->port_no); + led_ctrl = readl(hc_mmio + SOC_LED_CTRL_OFS); + writel(led_ctrl & ~SOC_LED_CTRL_BLINK, hc_mmio + SOC_LED_CTRL_OFS); +} + +static void mv_edma_cfg(struct ata_port *ap, int want_ncq, int want_edma) { u32 cfg; struct mv_port_priv *pp = ap->private_data; @@ -1185,7 +1476,8 @@ static void mv_edma_cfg(struct ata_port *ap, int want_ncq) /* set up non-NCQ EDMA configuration */ cfg = EDMA_CFG_Q_DEPTH; /* always 0x1f for *all* chips */ - pp->pp_flags &= ~MV_PP_FLAG_FBS_EN; + pp->pp_flags &= + ~(MV_PP_FLAG_FBS_EN | MV_PP_FLAG_NCQ_EN | MV_PP_FLAG_FAKE_ATA_BUSY); if (IS_GEN_I(hpriv)) cfg |= (1 << 8); /* enab config burst size mask */ @@ -1206,7 +1498,7 @@ static void mv_edma_cfg(struct ata_port *ap, int want_ncq) */ want_fbs &= want_ncq; - mv_config_fbs(port_mmio, want_ncq, want_fbs); + mv_config_fbs(ap, want_ncq, want_fbs); if (want_fbs) { pp->pp_flags |= MV_PP_FLAG_FBS_EN; @@ -1214,18 +1506,27 @@ static void mv_edma_cfg(struct ata_port *ap, int want_ncq) } cfg |= (1 << 23); /* do not mask PM field in rx'd FIS */ - cfg |= (1 << 22); /* enab 4-entry host queue cache */ - if (!IS_SOC(hpriv)) - cfg |= (1 << 18); /* enab early completion */ + if (want_edma) { + cfg |= (1 << 22); /* enab 4-entry host queue cache */ + if (!IS_SOC(hpriv)) + cfg |= (1 << 18); /* enab early completion */ + } if (hpriv->hp_flags & MV_HP_CUT_THROUGH) cfg |= (1 << 17); /* enab cut-thru (dis stor&forwrd) */ + mv_bmdma_enable_iie(ap, !want_edma); + + if (IS_SOC(hpriv)) { + if (want_ncq) + mv_soc_led_blink_enable(ap); + else + mv_soc_led_blink_disable(ap); + } } if (want_ncq) { cfg |= EDMA_CFG_NCQ; pp->pp_flags |= MV_PP_FLAG_NCQ_EN; - } else - pp->pp_flags &= ~MV_PP_FLAG_NCQ_EN; + } writelfl(cfg, port_mmio + EDMA_CFG_OFS); } @@ -1309,6 +1610,8 @@ static int mv_port_start(struct ata_port *ap) pp->sg_tbl_dma[tag] = pp->sg_tbl_dma[0]; } } + mv_save_cached_regs(ap); + mv_edma_cfg(ap, 0, 0); return 0; out_port_free_dma_mem: @@ -1357,12 +1660,13 @@ static void mv_fill_sg(struct ata_queued_cmd *qc) u32 offset = addr & 0xffff; u32 len = sg_len; - if ((offset + sg_len > 0x10000)) + if (offset + len > 0x10000) len = 0x10000 - offset; mv_sg->addr = cpu_to_le32(addr & 0xffffffff); mv_sg->addr_hi = cpu_to_le32((addr >> 16) >> 16); mv_sg->flags_size = cpu_to_le32(len & 0xffff); + mv_sg->reserved = 0; sg_len -= len; addr += len; @@ -1374,6 +1678,7 @@ static void mv_fill_sg(struct ata_queued_cmd *qc) if (likely(last_sg)) last_sg->flags_size |= cpu_to_le32(EPRD_FLAG_END_OF_TBL); + mb(); /* ensure data structure is visible to the chipset */ } static void mv_crqb_pack_cmd(__le16 *cmdw, u8 data, u8 addr, unsigned last) @@ -1384,6 +1689,147 @@ static void mv_crqb_pack_cmd(__le16 *cmdw, u8 data, u8 addr, unsigned last) } /** + * mv_sff_irq_clear - Clear hardware interrupt after DMA. + * @ap: Port associated with this ATA transaction. + * + * We need this only for ATAPI bmdma transactions, + * as otherwise we experience spurious interrupts + * after libata-sff handles the bmdma interrupts. + */ +static void mv_sff_irq_clear(struct ata_port *ap) +{ + mv_clear_and_enable_port_irqs(ap, mv_ap_base(ap), ERR_IRQ); +} + +/** + * mv_check_atapi_dma - Filter ATAPI cmds which are unsuitable for DMA. + * @qc: queued command to check for chipset/DMA compatibility. + * + * The bmdma engines cannot handle speculative data sizes + * (bytecount under/over flow). So only allow DMA for + * data transfer commands with known data sizes. + * + * LOCKING: + * Inherited from caller. + */ +static int mv_check_atapi_dma(struct ata_queued_cmd *qc) +{ + struct scsi_cmnd *scmd = qc->scsicmd; + + if (scmd) { + switch (scmd->cmnd[0]) { + case READ_6: + case READ_10: + case READ_12: + case WRITE_6: + case WRITE_10: + case WRITE_12: + case GPCMD_READ_CD: + case GPCMD_SEND_DVD_STRUCTURE: + case GPCMD_SEND_CUE_SHEET: + return 0; /* DMA is safe */ + } + } + return -EOPNOTSUPP; /* use PIO instead */ +} + +/** + * mv_bmdma_setup - Set up BMDMA transaction + * @qc: queued command to prepare DMA for. + * + * LOCKING: + * Inherited from caller. + */ +static void mv_bmdma_setup(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + void __iomem *port_mmio = mv_ap_base(ap); + struct mv_port_priv *pp = ap->private_data; + + mv_fill_sg(qc); + + /* clear all DMA cmd bits */ + writel(0, port_mmio + BMDMA_CMD_OFS); + + /* load PRD table addr. */ + writel((pp->sg_tbl_dma[qc->tag] >> 16) >> 16, + port_mmio + BMDMA_PRD_HIGH_OFS); + writelfl(pp->sg_tbl_dma[qc->tag], + port_mmio + BMDMA_PRD_LOW_OFS); + + /* issue r/w command */ + ap->ops->sff_exec_command(ap, &qc->tf); +} + +/** + * mv_bmdma_start - Start a BMDMA transaction + * @qc: queued command to start DMA on. + * + * LOCKING: + * Inherited from caller. + */ +static void mv_bmdma_start(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + void __iomem *port_mmio = mv_ap_base(ap); + unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE); + u32 cmd = (rw ? 0 : ATA_DMA_WR) | ATA_DMA_START; + + /* start host DMA transaction */ + writelfl(cmd, port_mmio + BMDMA_CMD_OFS); +} + +/** + * mv_bmdma_stop - Stop BMDMA transfer + * @qc: queued command to stop DMA on. + * + * Clears the ATA_DMA_START flag in the bmdma control register + * + * LOCKING: + * Inherited from caller. + */ +static void mv_bmdma_stop(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + void __iomem *port_mmio = mv_ap_base(ap); + u32 cmd; + + /* clear start/stop bit */ + cmd = readl(port_mmio + BMDMA_CMD_OFS); + cmd &= ~ATA_DMA_START; + writelfl(cmd, port_mmio + BMDMA_CMD_OFS); + + /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */ + ata_sff_dma_pause(ap); +} + +/** + * mv_bmdma_status - Read BMDMA status + * @ap: port for which to retrieve DMA status. + * + * Read and return equivalent of the sff BMDMA status register. + * + * LOCKING: + * Inherited from caller. + */ +static u8 mv_bmdma_status(struct ata_port *ap) +{ + void __iomem *port_mmio = mv_ap_base(ap); + u32 reg, status; + + /* + * Other bits are valid only if ATA_DMA_ACTIVE==0, + * and the ATA_DMA_INTR bit doesn't exist. + */ + reg = readl(port_mmio + BMDMA_STATUS_OFS); + if (reg & ATA_DMA_ACTIVE) + status = ATA_DMA_ACTIVE; + else + status = (reg & ATA_DMA_ERR) | ATA_DMA_INTR; + return status; +} + +/** * mv_qc_prep - Host specific command preparation. * @qc: queued command to prepare * @@ -1545,6 +1991,132 @@ static void mv_qc_prep_iie(struct ata_queued_cmd *qc) } /** + * mv_sff_check_status - fetch device status, if valid + * @ap: ATA port to fetch status from + * + * When using command issue via mv_qc_issue_fis(), + * the initial ATA_BUSY state does not show up in the + * ATA status (shadow) register. This can confuse libata! + * + * So we have a hook here to fake ATA_BUSY for that situation, + * until the first time a BUSY, DRQ, or ERR bit is seen. + * + * The rest of the time, it simply returns the ATA status register. + */ +static u8 mv_sff_check_status(struct ata_port *ap) +{ + u8 stat = ioread8(ap->ioaddr.status_addr); + struct mv_port_priv *pp = ap->private_data; + + if (pp->pp_flags & MV_PP_FLAG_FAKE_ATA_BUSY) { + if (stat & (ATA_BUSY | ATA_DRQ | ATA_ERR)) + pp->pp_flags &= ~MV_PP_FLAG_FAKE_ATA_BUSY; + else + stat = ATA_BUSY; + } + return stat; +} + +/** + * mv_send_fis - Send a FIS, using the "Vendor-Unique FIS" register + * @fis: fis to be sent + * @nwords: number of 32-bit words in the fis + */ +static unsigned int mv_send_fis(struct ata_port *ap, u32 *fis, int nwords) +{ + void __iomem *port_mmio = mv_ap_base(ap); + u32 ifctl, old_ifctl, ifstat; + int i, timeout = 200, final_word = nwords - 1; + + /* Initiate FIS transmission mode */ + old_ifctl = readl(port_mmio + SATA_IFCTL_OFS); + ifctl = 0x100 | (old_ifctl & 0xf); + writelfl(ifctl, port_mmio + SATA_IFCTL_OFS); + + /* Send all words of the FIS except for the final word */ + for (i = 0; i < final_word; ++i) + writel(fis[i], port_mmio + VENDOR_UNIQUE_FIS_OFS); + + /* Flag end-of-transmission, and then send the final word */ + writelfl(ifctl | 0x200, port_mmio + SATA_IFCTL_OFS); + writelfl(fis[final_word], port_mmio + VENDOR_UNIQUE_FIS_OFS); + + /* + * Wait for FIS transmission to complete. + * This typically takes just a single iteration. + */ + do { + ifstat = readl(port_mmio + SATA_IFSTAT_OFS); + } while (!(ifstat & 0x1000) && --timeout); + + /* Restore original port configuration */ + writelfl(old_ifctl, port_mmio + SATA_IFCTL_OFS); + + /* See if it worked */ + if ((ifstat & 0x3000) != 0x1000) { + ata_port_printk(ap, KERN_WARNING, + "%s transmission error, ifstat=%08x\n", + __func__, ifstat); + return AC_ERR_OTHER; + } + return 0; +} + +/** + * mv_qc_issue_fis - Issue a command directly as a FIS + * @qc: queued command to start + * + * Note that the ATA shadow registers are not updated + * after command issue, so the device will appear "READY" + * if polled, even while it is BUSY processing the command. + * + * So we use a status hook to fake ATA_BUSY until the drive changes state. + * + * Note: we don't get updated shadow regs on *completion* + * of non-data commands. So avoid sending them via this function, + * as they will appear to have completed immediately. + * + * GEN_IIE has special registers that we could get the result tf from, + * but earlier chipsets do not. For now, we ignore those registers. + */ +static unsigned int mv_qc_issue_fis(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct mv_port_priv *pp = ap->private_data; + struct ata_link *link = qc->dev->link; + u32 fis[5]; + int err = 0; + + ata_tf_to_fis(&qc->tf, link->pmp, 1, (void *)fis); + err = mv_send_fis(ap, fis, sizeof(fis) / sizeof(fis[0])); + if (err) + return err; + + switch (qc->tf.protocol) { + case ATAPI_PROT_PIO: + pp->pp_flags |= MV_PP_FLAG_FAKE_ATA_BUSY; + /* fall through */ + case ATAPI_PROT_NODATA: + ap->hsm_task_state = HSM_ST_FIRST; + break; + case ATA_PROT_PIO: + pp->pp_flags |= MV_PP_FLAG_FAKE_ATA_BUSY; + if (qc->tf.flags & ATA_TFLAG_WRITE) + ap->hsm_task_state = HSM_ST_FIRST; + else + ap->hsm_task_state = HSM_ST; + break; + default: + ap->hsm_task_state = HSM_ST_LAST; + break; + } + + if (qc->tf.flags & ATA_TFLAG_POLLING) + ata_pio_queue_task(ap, qc, 0); + return 0; +} + +/** * mv_qc_issue - Initiate a command to the host * @qc: queued command to start * @@ -1558,14 +2130,28 @@ static void mv_qc_prep_iie(struct ata_queued_cmd *qc) */ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc) { + static int limit_warnings = 10; struct ata_port *ap = qc->ap; void __iomem *port_mmio = mv_ap_base(ap); struct mv_port_priv *pp = ap->private_data; u32 in_index; + unsigned int port_irqs; - if ((qc->tf.protocol != ATA_PROT_DMA) && - (qc->tf.protocol != ATA_PROT_NCQ)) { - static int limit_warnings = 10; + pp->pp_flags &= ~MV_PP_FLAG_FAKE_ATA_BUSY; /* paranoia */ + + switch (qc->tf.protocol) { + case ATA_PROT_DMA: + case ATA_PROT_NCQ: + mv_start_edma(ap, port_mmio, pp, qc->tf.protocol); + pp->req_idx = (pp->req_idx + 1) & MV_MAX_Q_DEPTH_MASK; + in_index = pp->req_idx << EDMA_REQ_Q_PTR_SHIFT; + + /* Write the request in pointer to kick the EDMA to life */ + writelfl((pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK) | in_index, + port_mmio + EDMA_REQ_Q_IN_PTR_OFS); + return 0; + + case ATA_PROT_PIO: /* * Errata SATA#16, SATA#24: warn if multiple DRQs expected. * @@ -1583,27 +2169,46 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc) ": attempting PIO w/multiple DRQ: " "this may fail due to h/w errata\n"); } - /* - * We're about to send a non-EDMA capable command to the - * port. Turn off EDMA so there won't be problems accessing - * shadow block, etc registers. - */ - mv_stop_edma(ap); - mv_enable_port_irqs(ap, ERR_IRQ); - mv_pmp_select(ap, qc->dev->link->pmp); - return ata_sff_qc_issue(qc); + /* drop through */ + case ATA_PROT_NODATA: + case ATAPI_PROT_PIO: + case ATAPI_PROT_NODATA: + if (ap->flags & ATA_FLAG_PIO_POLLING) + qc->tf.flags |= ATA_TFLAG_POLLING; + break; } - mv_start_dma(ap, port_mmio, pp, qc->tf.protocol); - - pp->req_idx = (pp->req_idx + 1) & MV_MAX_Q_DEPTH_MASK; - in_index = pp->req_idx << EDMA_REQ_Q_PTR_SHIFT; + if (qc->tf.flags & ATA_TFLAG_POLLING) + port_irqs = ERR_IRQ; /* mask device interrupt when polling */ + else + port_irqs = ERR_IRQ | DONE_IRQ; /* unmask all interrupts */ - /* and write the request in pointer to kick the EDMA to life */ - writelfl((pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK) | in_index, - port_mmio + EDMA_REQ_Q_IN_PTR_OFS); + /* + * We're about to send a non-EDMA capable command to the + * port. Turn off EDMA so there won't be problems accessing + * shadow block, etc registers. + */ + mv_stop_edma(ap); + mv_clear_and_enable_port_irqs(ap, mv_ap_base(ap), port_irqs); + mv_pmp_select(ap, qc->dev->link->pmp); - return 0; + if (qc->tf.command == ATA_CMD_READ_LOG_EXT) { + struct mv_host_priv *hpriv = ap->host->private_data; + /* + * Workaround for 88SX60x1 FEr SATA#25 (part 2). + * + * After any NCQ error, the READ_LOG_EXT command + * from libata-eh *must* use mv_qc_issue_fis(). + * Otherwise it might fail, due to chip errata. + * + * Rather than special-case it, we'll just *always* + * use this method here for READ_LOG_EXT, making for + * easier testing. + */ + if (IS_GEN_II(hpriv)) + return mv_qc_issue_fis(qc); + } + return ata_sff_qc_issue(qc); } static struct ata_queued_cmd *mv_get_active_qc(struct ata_port *ap) @@ -1614,8 +2219,12 @@ static struct ata_queued_cmd *mv_get_active_qc(struct ata_port *ap) if (pp->pp_flags & MV_PP_FLAG_NCQ_EN) return NULL; qc = ata_qc_from_tag(ap, ap->link.active_tag); - if (qc && (qc->tf.flags & ATA_TFLAG_POLLING)) - qc = NULL; + if (qc) { + if (qc->tf.flags & ATA_TFLAG_POLLING) + qc = NULL; + else if (!(qc->flags & ATA_QCFLAG_ACTIVE)) + qc = NULL; + } return qc; } @@ -2084,6 +2693,10 @@ static int mv_host_intr(struct ata_host *host, u32 main_irq_cause) void __iomem *mmio = hpriv->base, *hc_mmio; unsigned int handled = 0, port; + /* If asserted, clear the "all ports" IRQ coalescing bit */ + if (main_irq_cause & ALL_PORTS_COAL_DONE) + writel(~ALL_PORTS_COAL_IRQ, mmio + MV_IRQ_COAL_CAUSE); + for (port = 0; port < hpriv->n_ports; port++) { struct ata_port *ap = host->ports[port]; unsigned int p, shift, hardport, port_cause; @@ -2116,6 +2729,8 @@ static int mv_host_intr(struct ata_host *host, u32 main_irq_cause) * to ack (only) those ports via hc_irq_cause. */ ack_irqs = 0; + if (hc_cause & PORTS_0_3_COAL_DONE) + ack_irqs = HC_COAL_IRQ; for (p = 0; p < MV_PORTS_PER_HC; ++p) { if ((port + p) >= hpriv->n_ports) break; @@ -2204,7 +2819,7 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance) /* for MSI: block new interrupts while in here */ if (using_msi) - writel(0, hpriv->main_irq_mask_addr); + mv_write_main_irq_mask(0, hpriv); main_irq_cause = readl(hpriv->main_irq_cause_addr); pending_irqs = main_irq_cause & hpriv->main_irq_mask; @@ -2221,7 +2836,7 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance) /* for MSI: unmask; interrupt cause bits will retrigger now */ if (using_msi) - writel(hpriv->main_irq_mask, hpriv->main_irq_mask_addr); + mv_write_main_irq_mask(hpriv->main_irq_mask, hpriv); spin_unlock(&host->lock); @@ -2774,6 +3389,8 @@ static int mv_hardreset(struct ata_link *link, unsigned int *class, mv_reset_channel(hpriv, mmio, ap->port_no); pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN; + pp->pp_flags &= + ~(MV_PP_FLAG_FBS_EN | MV_PP_FLAG_NCQ_EN | MV_PP_FLAG_FAKE_ATA_BUSY); /* Workaround for errata FEr SATA#10 (part 2) */ do { @@ -2793,6 +3410,8 @@ static int mv_hardreset(struct ata_link *link, unsigned int *class, extra = HZ; /* only extend it once, max */ } } while (sstatus != 0x0 && sstatus != 0x113 && sstatus != 0x123); + mv_save_cached_regs(ap); + mv_edma_cfg(ap, 0, 0); return rc; } @@ -3126,6 +3745,8 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx) * The per-port interrupts get done later as ports are set up. */ mv_set_main_irq_mask(host, 0, PCI_ERR); + mv_set_irq_coalescing(host, irq_coalescing_io_count, + irq_coalescing_usecs); done: return rc; } @@ -3287,12 +3908,6 @@ static struct pci_driver mv_pci_driver = { .remove = ata_pci_remove_one, }; -/* - * module options - */ -static int msi; /* Use PCI msi; either zero (off, default) or non-zero */ - - /* move to PCI layer or libata core? */ static int pci_go_64(struct pci_dev *pdev) { @@ -3474,10 +4089,5 @@ MODULE_DEVICE_TABLE(pci, mv_pci_tbl); MODULE_VERSION(DRV_VERSION); MODULE_ALIAS("platform:" DRV_NAME); -#ifdef CONFIG_PCI -module_param(msi, int, 0444); -MODULE_PARM_DESC(msi, "Enable use of PCI MSI (0=off, 1=on)"); -#endif - module_init(mv_init); module_exit(mv_exit); |