aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/ata
diff options
context:
space:
mode:
authorTejun Heo <tj@kernel.org>2011-02-21 09:43:56 +0100
committerTejun Heo <tj@kernel.org>2011-02-21 09:43:56 +0100
commit43d133c18b44e7d82d82ef0dcc2bddd55d5dfe81 (patch)
tree8de75c837b55874cc8a81a29bdedbc62668d4481 /drivers/ata
parent4149efb22da66e326fc48baf80d628834509f7f0 (diff)
parent6f576d57f1fa0d6026b495d8746d56d949989161 (diff)
downloadkernel_samsung_smdk4412-43d133c18b44e7d82d82ef0dcc2bddd55d5dfe81.zip
kernel_samsung_smdk4412-43d133c18b44e7d82d82ef0dcc2bddd55d5dfe81.tar.gz
kernel_samsung_smdk4412-43d133c18b44e7d82d82ef0dcc2bddd55d5dfe81.tar.bz2
Merge branch 'master' into for-2.6.39
Diffstat (limited to 'drivers/ata')
-rw-r--r--drivers/ata/ahci.c3
-rw-r--r--drivers/ata/libata-core.c1
-rw-r--r--drivers/ata/libata-scsi.c24
-rw-r--r--drivers/ata/pata_hpt366.c6
-rw-r--r--drivers/ata/pata_hpt37x.c112
-rw-r--r--drivers/ata/pata_hpt3x2n.c12
-rw-r--r--drivers/ata/pata_mpc52xx.c2
7 files changed, 85 insertions, 75 deletions
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 3288263..b8d96ce 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -260,6 +260,7 @@ static const struct pci_device_id ahci_pci_tbl[] = {
{ PCI_VDEVICE(INTEL, 0x1d02), board_ahci }, /* PBG AHCI */
{ PCI_VDEVICE(INTEL, 0x1d04), board_ahci }, /* PBG RAID */
{ PCI_VDEVICE(INTEL, 0x1d06), board_ahci }, /* PBG RAID */
+ { PCI_VDEVICE(INTEL, 0x2323), board_ahci }, /* DH89xxCC AHCI */
/* JMicron 360/1/3/5/6, match class to avoid IDE function */
{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
@@ -379,6 +380,8 @@ static const struct pci_device_id ahci_pci_tbl[] = {
{ PCI_VDEVICE(MARVELL, 0x6145), board_ahci_mv }, /* 6145 */
{ PCI_VDEVICE(MARVELL, 0x6121), board_ahci_mv }, /* 6121 */
{ PCI_DEVICE(0x1b4b, 0x9123),
+ .class = PCI_CLASS_STORAGE_SATA_AHCI,
+ .class_mask = 0xffffff,
.driver_data = board_ahci_yes_fbs }, /* 88se9128 */
/* Promise */
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index a31fe96..d4e52e2 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4138,6 +4138,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
* device and controller are SATA.
*/
{ "PIONEER DVD-RW DVRTD08", "1.00", ATA_HORKAGE_NOSETXFER },
+ { "PIONEER DVD-RW DVR-212D", "1.28", ATA_HORKAGE_NOSETXFER },
/* End Marker */
{ }
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 5defc74..600f635 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -1099,9 +1099,9 @@ static int ata_scsi_dev_config(struct scsi_device *sdev,
struct request_queue *q = sdev->request_queue;
void *buf;
- /* set the min alignment and padding */
- blk_queue_update_dma_alignment(sdev->request_queue,
- ATA_DMA_PAD_SZ - 1);
+ sdev->sector_size = ATA_SECT_SIZE;
+
+ /* set DMA padding */
blk_queue_update_dma_pad(sdev->request_queue,
ATA_DMA_PAD_SZ - 1);
@@ -1115,13 +1115,25 @@ static int ata_scsi_dev_config(struct scsi_device *sdev,
blk_queue_dma_drain(q, atapi_drain_needed, buf, ATAPI_MAX_DRAIN);
} else {
- /* ATA devices must be sector aligned */
sdev->sector_size = ata_id_logical_sector_size(dev->id);
- blk_queue_update_dma_alignment(sdev->request_queue,
- sdev->sector_size - 1);
sdev->manage_start_stop = 1;
}
+ /*
+ * ata_pio_sectors() expects buffer for each sector to not cross
+ * page boundary. Enforce it by requiring buffers to be sector
+ * aligned, which works iff sector_size is not larger than
+ * PAGE_SIZE. ATAPI devices also need the alignment as
+ * IDENTIFY_PACKET is executed as ATA_PROT_PIO.
+ */
+ if (sdev->sector_size > PAGE_SIZE)
+ ata_dev_printk(dev, KERN_WARNING,
+ "sector_size=%u > PAGE_SIZE, PIO may malfunction\n",
+ sdev->sector_size);
+
+ blk_queue_update_dma_alignment(sdev->request_queue,
+ sdev->sector_size - 1);
+
if (dev->flags & ATA_DFLAG_AN)
set_bit(SDEV_EVT_MEDIA_CHANGE, sdev->supported_events);
diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index d7e57db..538ec38 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -25,7 +25,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_hpt366"
-#define DRV_VERSION "0.6.9"
+#define DRV_VERSION "0.6.10"
struct hpt_clock {
u8 xfer_mode;
@@ -160,8 +160,8 @@ static int hpt_dma_blacklisted(const struct ata_device *dev, char *modestr,
while (list[i] != NULL) {
if (!strcmp(list[i], model_num)) {
- printk(KERN_WARNING DRV_NAME ": %s is not supported for %s.\n",
- modestr, list[i]);
+ pr_warning(DRV_NAME ": %s is not supported for %s.\n",
+ modestr, list[i]);
return 1;
}
i++;
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index efdd18b..4c5b518 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -24,7 +24,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_hpt37x"
-#define DRV_VERSION "0.6.18"
+#define DRV_VERSION "0.6.22"
struct hpt_clock {
u8 xfer_speed;
@@ -229,8 +229,8 @@ static int hpt_dma_blacklisted(const struct ata_device *dev, char *modestr,
while (list[i] != NULL) {
if (!strcmp(list[i], model_num)) {
- printk(KERN_WARNING DRV_NAME ": %s is not supported for %s.\n",
- modestr, list[i]);
+ pr_warning(DRV_NAME ": %s is not supported for %s.\n",
+ modestr, list[i]);
return 1;
}
i++;
@@ -642,7 +642,6 @@ static struct ata_port_operations hpt372_port_ops = {
static struct ata_port_operations hpt374_fn1_port_ops = {
.inherits = &hpt372_port_ops,
.cable_detect = hpt374_fn1_cable_detect,
- .prereset = hpt37x_pre_reset,
};
/**
@@ -803,7 +802,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
.udma_mask = ATA_UDMA6,
.port_ops = &hpt302_port_ops
};
- /* HPT374 - UDMA100, function 1 uses different prereset method */
+ /* HPT374 - UDMA100, function 1 uses different cable_detect method */
static const struct ata_port_info info_hpt374_fn0 = {
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = ATA_PIO4,
@@ -838,7 +837,8 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
if (rc)
return rc;
- if (dev->device == PCI_DEVICE_ID_TTI_HPT366) {
+ switch (dev->device) {
+ case PCI_DEVICE_ID_TTI_HPT366:
/* May be a later chip in disguise. Check */
/* Older chips are in the HPT366 driver. Ignore them */
if (rev < 3)
@@ -863,54 +863,50 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
chip_table = &hpt372;
break;
default:
- printk(KERN_ERR "pata_hpt37x: Unknown HPT366 subtype, "
+ pr_err(DRV_NAME ": Unknown HPT366 subtype, "
"please report (%d).\n", rev);
return -ENODEV;
}
- } else {
- switch (dev->device) {
- case PCI_DEVICE_ID_TTI_HPT372:
- /* 372N if rev >= 2 */
- if (rev >= 2)
- return -ENODEV;
- ppi[0] = &info_hpt372;
- chip_table = &hpt372a;
- break;
- case PCI_DEVICE_ID_TTI_HPT302:
- /* 302N if rev > 1 */
- if (rev > 1)
- return -ENODEV;
- ppi[0] = &info_hpt302;
- /* Check this */
- chip_table = &hpt302;
- break;
- case PCI_DEVICE_ID_TTI_HPT371:
- if (rev > 1)
- return -ENODEV;
- ppi[0] = &info_hpt302;
- chip_table = &hpt371;
- /*
- * Single channel device, master is not present
- * but the BIOS (or us for non x86) must mark it
- * absent
- */
- pci_read_config_byte(dev, 0x50, &mcr1);
- mcr1 &= ~0x04;
- pci_write_config_byte(dev, 0x50, mcr1);
- break;
- case PCI_DEVICE_ID_TTI_HPT374:
- chip_table = &hpt374;
- if (!(PCI_FUNC(dev->devfn) & 1))
- *ppi = &info_hpt374_fn0;
- else
- *ppi = &info_hpt374_fn1;
- break;
- default:
- printk(KERN_ERR
- "pata_hpt37x: PCI table is bogus, please report (%d).\n",
- dev->device);
- return -ENODEV;
- }
+ break;
+ case PCI_DEVICE_ID_TTI_HPT372:
+ /* 372N if rev >= 2 */
+ if (rev >= 2)
+ return -ENODEV;
+ ppi[0] = &info_hpt372;
+ chip_table = &hpt372a;
+ break;
+ case PCI_DEVICE_ID_TTI_HPT302:
+ /* 302N if rev > 1 */
+ if (rev > 1)
+ return -ENODEV;
+ ppi[0] = &info_hpt302;
+ /* Check this */
+ chip_table = &hpt302;
+ break;
+ case PCI_DEVICE_ID_TTI_HPT371:
+ if (rev > 1)
+ return -ENODEV;
+ ppi[0] = &info_hpt302;
+ chip_table = &hpt371;
+ /*
+ * Single channel device, master is not present but the BIOS
+ * (or us for non x86) must mark it absent
+ */
+ pci_read_config_byte(dev, 0x50, &mcr1);
+ mcr1 &= ~0x04;
+ pci_write_config_byte(dev, 0x50, mcr1);
+ break;
+ case PCI_DEVICE_ID_TTI_HPT374:
+ chip_table = &hpt374;
+ if (!(PCI_FUNC(dev->devfn) & 1))
+ *ppi = &info_hpt374_fn0;
+ else
+ *ppi = &info_hpt374_fn1;
+ break;
+ default:
+ pr_err(DRV_NAME ": PCI table is bogus, please report (%d).\n",
+ dev->device);
+ return -ENODEV;
}
/* Ok so this is a chip we support */
@@ -957,8 +953,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
u8 sr;
u32 total = 0;
- printk(KERN_WARNING
- "pata_hpt37x: BIOS has not set timing clocks.\n");
+ pr_warning(DRV_NAME ": BIOS has not set timing clocks.\n");
/* This is the process the HPT371 BIOS is reported to use */
for (i = 0; i < 128; i++) {
@@ -1014,7 +1009,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
(f_high << 16) | f_low | 0x100);
}
if (adjust == 8) {
- printk(KERN_ERR "pata_hpt37x: DPLL did not stabilize!\n");
+ pr_err(DRV_NAME ": DPLL did not stabilize!\n");
return -ENODEV;
}
if (dpll == 3)
@@ -1022,8 +1017,8 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
else
private_data = (void *)hpt37x_timings_50;
- printk(KERN_INFO "pata_hpt37x: bus clock %dMHz, using %dMHz DPLL.\n",
- MHz[clock_slot], MHz[dpll]);
+ pr_info(DRV_NAME ": bus clock %dMHz, using %dMHz DPLL.\n",
+ MHz[clock_slot], MHz[dpll]);
} else {
private_data = (void *)chip_table->clocks[clock_slot];
/*
@@ -1036,8 +1031,9 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
ppi[0] = &info_hpt370_33;
if (clock_slot < 2 && ppi[0] == &info_hpt370a)
ppi[0] = &info_hpt370a_33;
- printk(KERN_INFO "pata_hpt37x: %s using %dMHz bus clock.\n",
- chip_table->name, MHz[clock_slot]);
+
+ pr_info(DRV_NAME ": %s using %dMHz bus clock.\n",
+ chip_table->name, MHz[clock_slot]);
}
/* Now kick off ATA set up */
diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c
index d2239bb..eca68ca 100644
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -25,7 +25,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_hpt3x2n"
-#define DRV_VERSION "0.3.13"
+#define DRV_VERSION "0.3.14"
enum {
HPT_PCI_FAST = (1 << 31),
@@ -418,7 +418,7 @@ static int hpt3x2n_pci_clock(struct pci_dev *pdev)
u16 sr;
u32 total = 0;
- printk(KERN_WARNING "pata_hpt3x2n: BIOS clock data not set.\n");
+ pr_warning(DRV_NAME ": BIOS clock data not set.\n");
/* This is the process the HPT371 BIOS is reported to use */
for (i = 0; i < 128; i++) {
@@ -528,8 +528,7 @@ hpt372n:
ppi[0] = &info_hpt372n;
break;
default:
- printk(KERN_ERR
- "pata_hpt3x2n: PCI table is bogus please report (%d).\n",
+ pr_err(DRV_NAME ": PCI table is bogus, please report (%d).\n",
dev->device);
return -ENODEV;
}
@@ -579,12 +578,11 @@ hpt372n:
pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low);
}
if (adjust == 8) {
- printk(KERN_ERR "pata_hpt3x2n: DPLL did not stabilize!\n");
+ pr_err(DRV_NAME ": DPLL did not stabilize!\n");
return -ENODEV;
}
- printk(KERN_INFO "pata_hpt37x: bus clock %dMHz, using 66MHz DPLL.\n",
- pci_mhz);
+ pr_info(DRV_NAME ": bus clock %dMHz, using 66MHz DPLL.\n", pci_mhz);
/*
* Set our private data up. We only need a few flags
diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c
index 8cc536e..d7d8026 100644
--- a/drivers/ata/pata_mpc52xx.c
+++ b/drivers/ata/pata_mpc52xx.c
@@ -610,7 +610,7 @@ static struct scsi_host_template mpc52xx_ata_sht = {
};
static struct ata_port_operations mpc52xx_ata_port_ops = {
- .inherits = &ata_sff_port_ops,
+ .inherits = &ata_bmdma_port_ops,
.sff_dev_select = mpc52xx_ata_dev_select,
.set_piomode = mpc52xx_ata_set_piomode,
.set_dmamode = mpc52xx_ata_set_dmamode,